configs: pico-imx6: convert ethernet function to DM_ETH
PATCH 1/1 configs: pico-imx6: convert ethernet function to DM_ETH
From: Wig Cheng <[email protected]>
Before enable _DM_ETH:
Net: FEC [PRIME]
After enable DM_ETH:
Net: eth0: ethernet at 2188000
Here is the test commands:
=> dhcp
BOOTP broadcast 1
DHCP client bound to address 10.88.88.152 (146 ms) *** ERROR: `serverip' not set
Cannot autoload with TFTPGET
=> ping 8.8.8.8
Using ethernet at 2188000 device
host 8.8.8.8 is alive
--- configs/pico-imx6_defconfig | 3 +++ 1 file changed, 3 insertions(+)
configs/pico-imx6_defconfig +3 -0
@@ -64,6 +64,9 @@ CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_RGMII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH 1/1 configs: pico-imx6: convert ethernet function to DM_ETH
HI Wig,
Quoted 29 lines · On Tue, Jul 28, 2020 at 7:37 AM <[email protected]> wrote:
From: Wig Cheng <[email protected]>
Before enable
_DM_ETH:
Net: FEC [PRIME]After enable
DM_ETH:Net: eth0: ethernet at 2188000Here is the test commands:
=> dhcp
BOOTP broadcast 1
DHCP client bound to address 10.88.88.152 (146 ms) *** ERROR: `serverip' not set
Cannot autoload with TFTPGET
=> ping 8.8.8.8
Using ethernet at 2188000 device
host 8.8.8.8 is aliveSigned-off-by Wig Cheng <[email protected]>--- configs/pico-imx6_defconfig | 3 +++ 1 file changed, 3 insertions(+)configs/pico-imx6_defconfig +0
-0
configs/pico-imx6_defconfig CONFIG_DM_MMC=y · line 68
Quoted 5 lines
configs/pico-imx6_defconfig +2
-0@@ -64,6 +64,9 @@ CONFIG_DM_MMC=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y
mx6 has only a single FEC instance, so there is no need for selecting DM_MDIO.
Please see this patch I have recently submitted:
https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/commit/45032991194239991726cafe4dfa6a72ddf45956
Other than that your patch looks good.