Skip to contentSkip to conversation

4.19.142-rc1 review

PATCH In review Greg Kroah-Hartman 5 participants 80 messages Aug 24, 2020 – Aug 26, 2020

Subsystems (5)
lore
Share & tools
lore
author maintainer
#13 lore raw

PATCH 11/71 kernel/relay.c: fix memleak on destroy relay channel

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

commit 71e843295c680898959b22dc877ae3839cc22470 upstream.

kmemleak report memory leak as follows:

unreferenced object 0x607ee4e5f948 (size 8):
comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s) hex dump (first 8 bytes):
00 00 00 00 00 00 00 00 ........
backtrace:

     relay_open kernel/relay.c:583 [inline]
     relay_open+0xb6/0x970 kernel/relay.c:563
     do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
     __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
     blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
     blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
     block_ioctl+0xe5/0x120 fs/block_dev.c:1871
     vfs_ioctl fs/ioctl.c:48 [inline]
     __do_sys_ioctl fs/ioctl.c:753 [inline]
     __se_sys_ioctl fs/ioctl.c:739 [inline]
     __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
     do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

'chan->buf' is malloced in relay_open() by alloc_percpu() but not free while destroy the relay channel. Fix it by adding free_percpu() before return from relay_destroy_channel().

Fixes 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Cc Al Viro <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc David Rientjes <[email protected]>
Cc Michel Lespinasse <[email protected]>
Cc Daniel Axtens <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Akash Goel <[email protected]>
---
 kernel/relay.c |    1 +
 1 file changed, 1 insertion(+)
kernel/relay.c +1 -0
@@ -197,6 +197,7 @@ free_buf:
 static void relay_destroy_channel(struct kref *kref)
 {
 	struct rchan *chan = container_of(kref, struct rchan, kref);
+	free_percpu(chan->buf);
 	kfree(chan);
 }
 
author maintainer
#16 lore raw

PATCH 14/71 ext4: fix checking of directory entry validity for inline directories

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit 7303cb5bfe845f7d43cd9b2dbd37dbb266efda9b upstream.

ext4_search_dir() and ext4_generic_delete_entry() can be called both for standard director blocks and for inline directories stored inside inode or inline xattr space. For the second case we didn't call ext4_check_dir_entry() with proper constraints that could result in accepting corrupted directory entry as well as false positive filesystem errors like:

EXT4-fs error (device dm-0): ext4_search_dir:1395: inode #28320400:
block 113246792: comm dockerd: bad entry in directory: directory entry too close to block end - offset=0, inode=28320403, rec_len=32, name_len=8, size=4096

Fix the arguments passed to ext4_check_dir_entry().

Fixes 109ba779d6cc ("ext4: check for directory entries too close to block end")
---
 fs/ext4/namei.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/ext4/namei.c +3 -3
@@ -1309,8 +1309,8 @@ int ext4_search_dir(struct buffer_head *
 		    ext4_match(fname, de)) {
 			/* found a match - just to be sure, do
 			 * a full check */
-			if (ext4_check_dir_entry(dir, NULL, de, bh, bh->b_data,
-						 bh->b_size, offset))
+			if (ext4_check_dir_entry(dir, NULL, de, bh, search_buf,
+						 buf_size, offset))
 				return -1;
 			*res_dir = de;
 			return 1;
@@ -2344,7 +2344,7 @@ int ext4_generic_delete_entry(handle_t *
 	de = (struct ext4_dir_entry_2 *)entry_buf;
 	while (i < buf_size - csum_size) {
 		if (ext4_check_dir_entry(dir, NULL, de, bh,
-					 bh->b_data, bh->b_size, i))
+					 entry_buf, buf_size, i))
 			return -EFSCORRUPTED;
 		if (de == de_del)  {
 			if (pde)
author maintainer
#17 lore raw

PATCH 15/71 jbd2: add the missing unlock_buffer() in the error path of jbd2_write_superblock()

In reply to Greg Kroah-Hartman

From: zhangyi (F) <[email protected]>

commit ef3f5830b859604eda8723c26d90ab23edc027a4 upstream.

jbd2_write_superblock() is under the buffer lock of journal superblock before ending that superblock write, so add a missing unlock_buffer() in in the error path before submitting buffer.

---
 fs/jbd2/journal.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/jbd2/journal.c +3 -1
@@ -1370,8 +1370,10 @@ static int jbd2_write_superblock(journal
 	int ret;
 
 	/* Buffer got discarded which means block device got invalidated */
-	if (!buffer_mapped(bh))
+	if (!buffer_mapped(bh)) {
+		unlock_buffer(bh);
 		return -EIO;
+	}
 
 	trace_jbd2_write_superblock(journal, write_flags);
 	if (!(journal->j_flags & JBD2_BARRIER))
author maintainer
#18 lore raw

PATCH 16/71 scsi: zfcp: Fix use-after-free in request timeout handlers

In reply to Greg Kroah-Hartman

From: Steffen Maier <[email protected]>

commit 2d9a2c5f581be3991ba67fa9e7497c711220ea8e upstream.

Before v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"), we intentionally only passed zfcp_adapter as context argument to zfcp_fsf_request_timeout_handler(). Since we only trigger adapter recovery, it was unnecessary to sync against races between timeout and (late) completion. Likewise, we only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action, it was unnecessary to sync against races between timeout and (late) completion.

Meanwhile the timeout handlers get timer_list as context argument and do a timer-specific container-of to zfcp_fsf_req which can have been freed.

Fix it by making sure that any request timeout handlers, that might just have started before del_timer(), are completed by using del_timer_sync() instead. This ensures the request free happens afterwards.

Space time diagram of potential use-after-free:

Basic idea is to have 2 or more pending requests whose timeouts run out at almost the same time.

req 1 timeout     ERP thread        req 2 timeout
----------------  ----------------  ---------------------------------------

zfcp_fsf_request_timeout_handler
fsf_req = from_timer(fsf_req, t, timer)
adapter = fsf_req->adapter
zfcp_qdio_siosl(adapter)
zfcp_erp_adapter_reopen(adapter,...)

                  zfcp_erp_strategy
                  ...
                  zfcp_fsf_req_dismiss_all
                  list_for_each_entry_safe
                    zfcp_fsf_req_complete 1
                    del_timer 1
                    zfcp_fsf_req_free 1
                    zfcp_fsf_req_complete 2
                                    zfcp_fsf_request_timeout_handler
                    del_timer 2
                                    fsf_req = from_timer(fsf_req, t, timer)
                    zfcp_fsf_req_free 2
                                    adapter = fsf_req->adapter
                                              ^^^^^^^ already freed
---
 drivers/s390/scsi/zfcp_fsf.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/s390/scsi/zfcp_fsf.c +2 -2
@@ -403,7 +403,7 @@ static void zfcp_fsf_req_complete(struct
 		return;
 	}
 
-	del_timer(&req->timer);
+	del_timer_sync(&req->timer);
 	zfcp_fsf_protstatus_eval(req);
 	zfcp_fsf_fsfstatus_eval(req);
 	req->handler(req);
@@ -758,7 +758,7 @@ static int zfcp_fsf_req_send(struct zfcp
 	req->qdio_req.qdio_outb_usage = atomic_read(&qdio->req_q_free);
 	req->issued = get_tod_clock();
 	if (zfcp_qdio_send(qdio, &req->qdio_req)) {
-		del_timer(&req->timer);
+		del_timer_sync(&req->timer);
 		/* lookup request again, list might have changed */
 		zfcp_reqlist_find_rm(adapter->req_list, req_id);
 		zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1");
author maintainer
#19 lore raw

PATCH 17/71 mm/memory.c: skip spurious TLB flush for retried page fault

In reply to Greg Kroah-Hartman

From: Yang Shi <[email protected]>

commit b7333b58f358f38d90d78e00c1ee5dec82df10ad upstream.

Recently we found regression when running will_it_scale/page_fault3 test on ARM64. Over 70% down for the multi processes cases and over 20% down for the multi threads cases. It turns out the regression is caused by commit 89b15332af7c ("mm: drop mmap_sem before calling balance_dirty_pages() in write fault").

The test mmaps a memory size file then write to the mapping, this would make all memory dirty and trigger dirty pages throttle, that upstream commit would release mmap_sem then retry the page fault. The retried page fault would see correct PTEs installed then just fall through to spurious TLB flush. The regression is caused by the excessive spurious TLB flush. It is fine on x86 since x86's spurious TLB flush is no-op.

We could just skip the spurious TLB flush to mitigate the regression.

---
 mm/memory.c |    3 +++
 1 file changed, 3 insertions(+)
mm/memory.c +3 -0
@@ -4062,6 +4062,9 @@ static vm_fault_t handle_pte_fault(struc
 				vmf->flags & FAULT_FLAG_WRITE)) {
 		update_mmu_cache(vmf->vma, vmf->address, vmf->pte);
 	} else {
+		/* Skip spurious TLB flush for retried page fault */
+		if (vmf->flags & FAULT_FLAG_TRIED)
+			goto unlock;
 		/*
 		 * This is needed only for protection faults but the arch code
 		 * is not yet telling us if this is a protection fault or not.
author maintainer
#15 lore raw

PATCH 13/71 mm, page_alloc: fix core hung in free_pcppages_bulk()

In reply to Greg Kroah-Hartman

From: Charan Teja Reddy <[email protected]>

commit 88e8ac11d2ea3acc003cf01bb5a38c8aa76c3cfd upstream.

The following race is observed with the repeated online, offline and a delay between two successive online of memory blocks of movable zone.

P1 P2

Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.

Allocate the pages from the movable zone.

Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into the exit path thus it tries to release the order-0 pages to pcp lists through free_unref_page_commit(). As pcp->high = 0, pcp->count = 1 proceed to call the function free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using READ_ONCE() and pass the same to free_pcppages_bulk(), pcp values passed here are, batch = 63, count = 1.

Since num of pages in the pcp lists are less than ->batch, then it will stuck in while(list_empty(list)) loop with interrupts disabled thus a core hung.

Avoid this by ensuring free_pcppages_bulk() is called with proper count of pcp list pages.

The mentioned race is some what easily reproducible without [1] because pcp's are not updated for the first memory block online and thus there is a enough race window for P2 between alloc+free and pcp struct values update through onlining of second memory block.

With [1], the race still exists but it is very narrow as we update the pcp struct values for the first memory block online itself.

This is not limited to the movable zone, it could also happen in cases with the normal zone (e.g., hotplug to a node that only has DMA memory, or no other memory yet).

[1]: https://patchwork.kernel.org/patch/11696389/

---
 mm/page_alloc.c |    5 +++++
 1 file changed, 5 insertions(+)
mm/page_alloc.c +5 -0
@@ -1115,6 +1115,11 @@ static void free_pcppages_bulk(struct zo
 	struct page *page, *tmp;
 	LIST_HEAD(head);
 
+	/*
+	 * Ensure proper count is passed which otherwise would stuck in the
+	 * below while (list_empty(list)) loop.
+	 */
+	count = min(pcp->count, count);
 	while (count) {
 		struct list_head *list;
 
author maintainer
#3 lore raw

PATCH 3/71 khugepaged: khugepaged_test_exit() check mmget_still_valid()

In reply to Greg Kroah-Hartman

From: Hugh Dickins <[email protected]>

[ Upstream commit bbe98f9cadff58cdd6a4acaeba0efa8565dabe65 ]

Move collapse_huge_page()'s mmget_still_valid() check into khugepaged_test_exit() itself. collapse_huge_page() is used for anon THP only, and earned its mmget_still_valid() check because it inserts a huge pmd entry in place of the page table's pmd entry; whereas collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp() merely clears the page table's pmd entry. But core dumping without mmap lock must have been as open to mistaking a racily cleared pmd entry for a page table at physical page 0, as exit_mmap() was. And we certainly have no interest in mapping as a THP once dumping core.

Fixes 59ea6d06cfa9 ("coredump: fix race condition between collapse_huge_page() and core dumping")
Cc Andrea Arcangeli <[email protected]>
Cc Song Liu <[email protected]>
Cc Mike Kravetz <[email protected]>
Cc Kirill A. Shutemov <[email protected]>
Cc <[email protected]> [4.8+]
---
 mm/khugepaged.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
mm/khugepaged.c +1 -4
index 483c4573695a9..fbb3ac9ce0869 100644
@@ -394,7 +394,7 @@ static void insert_to_mm_slots_hash(struct mm_struct *mm,
 
 static inline int khugepaged_test_exit(struct mm_struct *mm)
 {
-	return atomic_read(&mm->mm_users) == 0;
+	return atomic_read(&mm->mm_users) == 0 || !mmget_still_valid(mm);
 }
 
 static bool hugepage_vma_check(struct vm_area_struct *vma,
@@ -1005,9 +1005,6 @@ static void collapse_huge_page(struct mm_struct *mm,
 	 * handled by the anon_vma lock + PG_lock.
 	 */
 	down_write(&mm->mmap_sem);
-	result = SCAN_ANY_PROCESS;
-	if (!mmget_still_valid(mm))
-		goto out;
 	result = hugepage_vma_revalidate(mm, address, &vma);
 	if (result)
 		goto out;
Signature · 1 line
2.25.1
author maintainer
#2 lore raw

PATCH 2/71 perf probe: Fix memory leakage when the probe point is not found

In reply to Greg Kroah-Hartman

From: Masami Hiramatsu <[email protected]>

[ Upstream commit 12d572e785b15bc764e956caaa8a4c846fd15694 ]

Fix the memory leakage in debuginfo__find_trace_events() when the probe point is not found in the debuginfo. If there is no probe point found in the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.

Thus the caller of debuginfo__find_probes() must check the tf.ntevs and release the allocated memory for the array of struct probe_trace_event.

The current code releases the memory only if the debuginfo__find_probes() hits an error but not checks tf.ntevs. In the result, the memory allocated on *tevs are not released if tf.ntevs == 0.

This fixes the memory leakage by checking tf.ntevs == 0 in addition to ret < 0.

---
 tools/perf/util/probe-finder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/probe-finder.c +1 -1
index 60169196b9481..4da4ec2552463 100644
@@ -1351,7 +1351,7 @@ int debuginfo__find_trace_events(struct debuginfo *dbg,
 	tf.ntevs = 0;
 
 	ret = debuginfo__find_probes(dbg, &tf.pf);
-	if (ret < 0) {
+	if (ret < 0 || tf.ntevs == 0) {
 		for (i = 0; i < tf.ntevs; i++)
 			clear_probe_trace_event(&tf.tevs[i]);
 		zfree(tevs);
Signature · 1 line
2.25.1
author maintainer
#4 lore raw

PATCH 4/71 khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

In reply to Greg Kroah-Hartman

From: Hugh Dickins <[email protected]>

[ Upstream commit f3f99d63a8156c7a4a6b20aac22b53c5579c7dc1 ]

syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in __khugepaged_enter(): yes, when one thread is about to dump core, has set core_state, and is waiting for others, another might do something calling __khugepaged_enter(), which now crashes because I lumped the core_state test (known as "mmget_still_valid") into khugepaged_test_exit(). I still think it's best to lump them together, so just in this exceptional case, check mm->mm_users directly instead of khugepaged_test_exit().

Fixes bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Cc "Kirill A. Shutemov" <[email protected]>
Cc Andrea Arcangeli <[email protected]>
Cc Song Liu <[email protected]>
Cc Mike Kravetz <[email protected]>
Cc Eric Dumazet <[email protected]>
Cc <[email protected]> [4.8+]
---
 mm/khugepaged.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/khugepaged.c +1 -1
index fbb3ac9ce0869..f37be43f8caeb 100644
@@ -427,7 +427,7 @@ int __khugepaged_enter(struct mm_struct *mm)
 		return -ENOMEM;
 
 	/* __khugepaged_exit() must not run from under us */
-	VM_BUG_ON_MM(khugepaged_test_exit(mm), mm);
+	VM_BUG_ON_MM(atomic_read(&mm->mm_users) == 0, mm);
 	if (unlikely(test_and_set_bit(MMF_VM_HUGEPAGE, &mm->flags))) {
 		free_mm_slot(mm_slot);
 		return 0;
Signature · 1 line
2.25.1
author maintainer
#7 lore raw

PATCH 7/71 btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range

In reply to Greg Kroah-Hartman

From: Nikolay Borisov <[email protected]>

[ Upstream commit cecc8d9038d164eda61fbcd72520975a554ea63e ]

This label is only executed if compress_file_range fails to create an inline extent. So move its code in the semantically related inline extent handling branch. No functional changes.

---
 fs/btrfs/inode.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
fs/btrfs/inode.c +8 -8
index 1656ef0e959f0..8507192cd6449 100644
@@ -628,7 +628,14 @@ cont:
 						     PAGE_SET_WRITEBACK |
 						     page_error_op |
 						     PAGE_END_WRITEBACK);
-			goto free_pages_out;
+
+			for (i = 0; i < nr_pages; i++) {
+				WARN_ON(pages[i]->mapping);
+				put_page(pages[i]);
+			}
+			kfree(pages);
+
+			return;
 		}
 	}
 
@@ -706,13 +713,6 @@ cleanup_and_bail_uncompressed:
 	*num_added += 1;
 
 	return;
-
-free_pages_out:
-	for (i = 0; i < nr_pages; i++) {
-		WARN_ON(pages[i]->mapping);
-		put_page(pages[i]);
-	}
-	kfree(pages);
 }
 
 static void free_async_extent_pages(struct async_extent *async_extent)
Signature · 1 line
2.25.1
author maintainer
#31 lore raw

PATCH 28/71 svcrdma: Fix another Receive buffer leak

In reply to Greg Kroah-Hartman

From: Chuck Lever <[email protected]>

[ Upstream commit 64d26422516b2e347b32e6d9b1d40b3c19a62aae ]

During a connection tear down, the Receive queue is flushed before the device resources are freed. Typically, all the Receives flush with IB_WR_FLUSH_ERR.

However, any pending successful Receives flush with IB_WR_SUCCESS, and the server automatically posts a fresh Receive to replace the completing one. This happens even after the connection has closed and the RQ is drained. Receives that are posted after the RQ is drained appear never to complete, causing a Receive resource leak. The leaked Receive buffer is left DMA-mapped.

To prevent these late-posted recv_ctxt's from leaking, block new Receive posting after XPT_CLOSE is set.

---
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 ++
 1 file changed, 2 insertions(+)
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c +2 -0
index 16c8174658fd1..252495ff9010d 100644
@@ -268,6 +268,8 @@ static int svc_rdma_post_recv(struct svcxprt_rdma *rdma)
 {
 	struct svc_rdma_recv_ctxt *ctxt;
 
+	if (test_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags))
+		return 0;
 	ctxt = svc_rdma_recv_ctxt_get(rdma);
 	if (!ctxt)
 		return -ENOMEM;
Signature · 1 line
2.25.1
author maintainer
#50 lore raw

PATCH 47/71 s390/runtime_instrumentation: fix storage key handling

In reply to Greg Kroah-Hartman

From: Heiko Carstens <[email protected]>

[ Upstream commit 9eaba29c7985236e16468f4e6a49cc18cf01443e ]

The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits.
Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero.

Fixes e4b8b3f33fca ("s390: add support for runtime instrumentation")
---
 arch/s390/kernel/runtime_instr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/s390/kernel/runtime_instr.c +1 -1
index 125c7f6e87150..1788a5454b6fc 100644
@@ -57,7 +57,7 @@ static void init_runtime_instr_cb(struct runtime_instr_cb *cb)
 	cb->k = 1;
 	cb->ps = 1;
 	cb->pc = 1;
-	cb->key = PAGE_DEFAULT_KEY;
+	cb->key = PAGE_DEFAULT_KEY >> 4;
 	cb->v = 1;
 }
 
Signature · 1 line
2.25.1
author maintainer
#23 lore raw

PATCH 21/71 scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices

In reply to Greg Kroah-Hartman

From: Stanley Chu <[email protected]>

[ Upstream commit c0a18ee0ce78d7957ec1a53be35b1b3beba80668 ]

It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a delay before VCC is powered off. Sdd Micron vendor ID and this quirk for Micron devices.

---
 drivers/scsi/ufs/ufs_quirks.h | 1 +
 drivers/scsi/ufs/ufshcd.c     | 2 ++
 2 files changed, 3 insertions(+)
drivers/scsi/ufs/ufs_quirks.h +1 -0
index 5d2dfdb41a6ff..758d3a67047df 100644
@@ -21,6 +21,7 @@
 #define UFS_ANY_VENDOR 0xFFFF
 #define UFS_ANY_MODEL  "ANY_MODEL"
 
+#define UFS_VENDOR_MICRON      0x12C
 #define UFS_VENDOR_TOSHIBA     0x198
 #define UFS_VENDOR_SAMSUNG     0x1CE
 #define UFS_VENDOR_SKHYNIX     0x1AD
drivers/scsi/ufs/ufshcd.c +2 -0
index bd21c9cdf8183..ab628fd37e026 100644
@@ -218,6 +218,8 @@ ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state,
 
 static struct ufs_dev_fix ufs_fixups[] = {
 	/* UFS cards deviations table */
+	UFS_FIX(UFS_VENDOR_MICRON, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
 		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
Signature · 1 line
2.25.1
author maintainer
#37 lore raw

PATCH 34/71 virtio_ring: Avoid loop when vq is broken in virtqueue_poll

In reply to Greg Kroah-Hartman

From: Mao Wenan <[email protected]>

[ Upstream commit 481a0d7422db26fb63e2d64f0652667a5c6d0f3e ]

The loop may exist if vq->broken is true, virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split will return NULL, so virtnet_poll will reschedule napi to receive packet, it will lead cpu usage(si) to 100%.

call trace as below:
virtnet_poll
virtnet_receive
virtqueue_get_buf_ctx
virtqueue_get_buf_ctx_packed virtqueue_get_buf_ctx_split
virtqueue_napi_complete
virtqueue_poll //return true
virtqueue_napi_schedule //it will reschedule napi

to fix this, return false if vq is broken in virtqueue_poll.

---
 drivers/virtio/virtio_ring.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/virtio/virtio_ring.c +3 -0
index 6228b48d1e127..df7980aef927a 100644
@@ -828,6 +828,9 @@ bool virtqueue_poll(struct virtqueue *_vq, unsigned last_used_idx)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
+	if (unlikely(vq->broken))
+		return false;
+
 	virtio_mb(vq->weak_barriers);
 	return (u16)last_used_idx != virtio16_to_cpu(_vq->vdev, vq->vring.used->idx);
 }
Signature · 1 line
2.25.1
author maintainer
#28 lore raw

PATCH 25/71 media: vpss: clean up resources in init

In reply to Greg Kroah-Hartman

From: Evgeny Novikov <[email protected]>

[ Upstream commit 9c487b0b0ea7ff22127fe99a7f67657d8730ff94 ]

If platform_driver_register() fails within vpss_init() resources are not cleaned up. The patch fixes this issue by introducing the corresponding error handling.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/media/platform/davinci/vpss.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)
drivers/media/platform/davinci/vpss.c +16 -4
index 89a86c19579b8..50fc71d0cb9f3 100644
@@ -514,19 +514,31 @@ static void vpss_exit(void)
 
 static int __init vpss_init(void)
 {
+	int ret;
+
 	if (!request_mem_region(VPSS_CLK_CTRL, 4, "vpss_clock_control"))
 		return -EBUSY;
 
 	oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4);
 	if (unlikely(!oper_cfg.vpss_regs_base2)) {
-		release_mem_region(VPSS_CLK_CTRL, 4);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
 	writel(VPSS_CLK_CTRL_VENCCLKEN |
-		     VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
+	       VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
+
+	ret = platform_driver_register(&vpss_driver);
+	if (ret)
+		goto err_pd_register;
+
+	return 0;
 
-	return platform_driver_register(&vpss_driver);
+err_pd_register:
+	iounmap(oper_cfg.vpss_regs_base2);
+err_ioremap:
+	release_mem_region(VPSS_CLK_CTRL, 4);
+	return ret;
 }
 subsys_initcall(vpss_init);
 module_exit(vpss_exit);
Signature · 1 line
2.25.1
author maintainer
#48 lore raw

PATCH 45/71 bonding: show saner speed for broadcast mode

In reply to Greg Kroah-Hartman

From: Jarod Wilson <[email protected]>

[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ]

Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface.

Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types.

Fixes bb5b052f751b ("bond: add support to read speed and duplex via ethtool")
CC Jay Vosburgh <[email protected]>
CC Veaceslav Falico <[email protected]>
CC Andy Gospodarek <[email protected]>
CC "David S. Miller" <[email protected]>
---
 drivers/net/bonding/bond_main.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)
drivers/net/bonding/bond_main.c +18 -3
index 11429df743067..76fd5fc437ebe 100644
@@ -4200,13 +4200,23 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return ret;
 }
 
+static u32 bond_mode_bcast_speed(struct slave *slave, u32 speed)
+{
+	if (speed == 0 || speed == SPEED_UNKNOWN)
+		speed = slave->speed;
+	else
+		speed = min(speed, slave->speed);
+
+	return speed;
+}
+
 static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev,
 					   struct ethtool_link_ksettings *cmd)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
-	unsigned long speed = 0;
 	struct list_head *iter;
 	struct slave *slave;
+	u32 speed = 0;
 
 	cmd->base.duplex = DUPLEX_UNKNOWN;
 	cmd->base.port = PORT_OTHER;
@@ -4218,8 +4228,13 @@ static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev,
 	 */
 	bond_for_each_slave(bond, slave, iter) {
 		if (bond_slave_can_tx(slave)) {
-			if (slave->speed != SPEED_UNKNOWN)
-				speed += slave->speed;
+			if (slave->speed != SPEED_UNKNOWN) {
+				if (BOND_MODE(bond) == BOND_MODE_BROADCAST)
+					speed = bond_mode_bcast_speed(slave,
+								      speed);
+				else
+					speed += slave->speed;
+			}
 			if (cmd->base.duplex == DUPLEX_UNKNOWN &&
 			    slave->duplex != DUPLEX_UNKNOWN)
 				cmd->base.duplex = slave->duplex;
Signature · 1 line
2.25.1
author maintainer
#65 lore raw

PATCH 62/71 net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()

In reply to Greg Kroah-Hartman

From: Wang Hai <[email protected]>

[ Upstream commit cf96d977381d4a23957bade2ddf1c420b74a26b6 ]

Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way, when probe fails, netdev can be freed automatically.

Fixes 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
---
 drivers/net/ethernet/cortina/gemini.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/net/ethernet/cortina/gemini.c +1 -3
index f402af39da42a..16de0fa92ab74 100644
@@ -2392,7 +2392,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 
 	dev_info(dev, "probe %s ID %d\n", dev_name(dev), id);
 
-	netdev = alloc_etherdev_mq(sizeof(*port), TX_QUEUE_NUM);
+	netdev = devm_alloc_etherdev_mqs(dev, sizeof(*port), TX_QUEUE_NUM, TX_QUEUE_NUM);
 	if (!netdev) {
 		dev_err(dev, "Can't allocate ethernet device #%d\n", id);
 		return -ENOMEM;
@@ -2526,7 +2526,6 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	}
 
 	port->netdev = NULL;
-	free_netdev(netdev);
 	return ret;
 }
 
@@ -2535,7 +2534,6 @@ static int gemini_ethernet_port_remove(struct platform_device *pdev)
 	struct gemini_ethernet_port *port = platform_get_drvdata(pdev);
 
 	gemini_port_remove(port);
-	free_netdev(port->netdev);
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#66 lore raw

PATCH 63/71 hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

In reply to Greg Kroah-Hartman

From: Haiyang Zhang <[email protected]>

[ Upstream commit c3d897e01aef8ddc43149e4d661b86f823e3aae7 ]

netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the queue number, so the “skb->queue_mapping - 1” will be used. This may cause the last queue of VF not been used.

Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called later will get the correct queue number, and VF will be able to use all queues.

Fixes b3bf5666a510 ("hv_netvsc: defer queue selection to VF")
---
 drivers/net/hyperv/netvsc_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/hyperv/netvsc_drv.c +1 -1
index e33cbb793b638..4a5d99ecb89d3 100644
@@ -513,7 +513,7 @@ static int netvsc_vf_xmit(struct net_device *net, struct net_device *vf_netdev,
 	int rc;
 
 	skb->dev = vf_netdev;
-	skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping;
+	skb_record_rx_queue(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping);
 
 	rc = dev_queue_xmit(skb);
 	if (likely(rc == NET_XMIT_SUCCESS || rc == NET_XMIT_CN)) {
Signature · 1 line
2.25.1
author maintainer
#24 lore raw

PATCH 22/71 scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM

In reply to Greg Kroah-Hartman

From: Bodo Stroesser <[email protected]>

[ Upstream commit 3145550a7f8b08356c8ff29feaa6c56aca12901d ]

This patch fixes the following crash (see
https://bugzilla.kernel.org/show_bug.cgi?id=208045)

Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a)

 CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic
        #202004230533
 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019
 pstate: 80400005 (Nzcv daif +PAN -UAO)
 pc : flush_dcache_page+0x18/0x40
 lr : is_ring_space_avail+0x68/0x2f8 [target_core_user]
 sp : ffff000015123a80
 x29: ffff000015123a80 x28: 0000000000000000
 x27: 0000000000001000 x26: ffff000023ea5000
 x25: ffffcfa25bbe08b8 x24: 0000000000000078
 x23: ffff7e0000000000 x22: ffff000023ea5001
 x21: ffffcfa24b79c000 x20: 0000000000000fff
 x19: ffff7e00008fa940 x18: 0000000000000000
 x17: 0000000000000000 x16: ffff2d047e709138
 x15: 0000000000000000 x14: 0000000000000000
 x13: 0000000000000000 x12: ffff2d047fbd0a40
 x11: 0000000000000000 x10: 0000000000000030
 x9 : 0000000000000000 x8 : ffffc9a254820a00
 x7 : 00000000000013b0 x6 : 000000000000003f
 x5 : 0000000000000040 x4 : ffffcfa25bbe08e8
 x3 : 0000000000001000 x2 : 0000000000000078
 x1 : ffffcfa25bbe08b8 x0 : ffff2d040bc88a18
 Call trace:
  flush_dcache_page+0x18/0x40
  is_ring_space_avail+0x68/0x2f8 [target_core_user]
  queue_cmd_ring+0x1f8/0x680 [target_core_user]
  tcmu_queue_cmd+0xe4/0x158 [target_core_user]
  __target_execute_cmd+0x30/0xf0 [target_core_mod]
  target_execute_cmd+0x294/0x390 [target_core_mod]
  transport_generic_new_cmd+0x1e8/0x358 [target_core_mod]
  transport_handle_cdb_direct+0x50/0xb0 [target_core_mod]
  iscsit_execute_cmd+0x2b4/0x350 [iscsi_target_mod]
  iscsit_sequence_cmd+0xd8/0x1d8 [iscsi_target_mod]
  iscsit_process_scsi_cmd+0xac/0xf8 [iscsi_target_mod]
  iscsit_get_rx_pdu+0x404/0xd00 [iscsi_target_mod]
  iscsi_target_rx_thread+0xb8/0x130 [iscsi_target_mod]
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
 Code: f9000bf3 aa0003f3 aa1e03e0 d503201f (f9400260)
 ---[ end trace 1e451c73f4266776 ]---

The solution is based on patch:

"scsi: target: tcmu: Optimize use of flush_dcache_page"

which restricts the use of tcmu_flush_dcache_range() to addresses from vmalloc'ed areas only.

This patch now replaces the virt_to_page() call in tcmu_flush_dcache_range() - which is wrong for vmalloced addrs - by vmalloc_to_page().

The patch was tested on ARM with kernel 4.19.118 and 5.7.2

---
 drivers/target/target_core_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/target/target_core_user.c +1 -1
index 8da89925a874d..9c05e820857aa 100644
@@ -612,7 +612,7 @@ static inline void tcmu_flush_dcache_range(void *vaddr, size_t size)
 	size = round_up(size+offset, PAGE_SIZE);
 
 	while (size) {
-		flush_dcache_page(virt_to_page(start));
+		flush_dcache_page(vmalloc_to_page(start));
 		start += PAGE_SIZE;
 		size -= PAGE_SIZE;
 	}
Signature · 1 line
2.25.1
author maintainer
#71 lore raw

PATCH 66/71 efi: add missed destroy_workqueue when efisubsys_init fails

In reply to Greg Kroah-Hartman

From: Li Heng <[email protected]>

commit 98086df8b70c06234a8f4290c46064e44dafa0ed upstream.

destroy_workqueue() should be called to destroy efi_rts_wq when efisubsys_init() init resources fails.

---
 drivers/firmware/efi/efi.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/firmware/efi/efi.c +2 -0
@@ -359,6 +359,7 @@ static int __init efisubsys_init(void)
 	efi_kobj = kobject_create_and_add("efi", firmware_kobj);
 	if (!efi_kobj) {
 		pr_err("efi: Firmware registration failed.\n");
+		destroy_workqueue(efi_rts_wq);
 		return -ENOMEM;
 	}
 
@@ -395,6 +396,7 @@ err_unregister:
 	generic_ops_unregister();
 err_put:
 	kobject_put(efi_kobj);
+	destroy_workqueue(efi_rts_wq);
 	return error;
 }
 
author maintainer
#54 lore raw

PATCH 51/71 vfio/type1: Add proper error unwind for vfio_iommu_replay()

In reply to Greg Kroah-Hartman

From: Alex Williamson <[email protected]>

[ Upstream commit aae7a75a821a793ed6b8ad502a5890fb8e8f172d ]

The vfio_iommu_replay() function does not currently unwind on error, yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma structure to indicate IOMMU mapping. The IOMMU mappings are torn down when the domain is destroyed, but the other actions go on to cause trouble later. For example, the iommu->domain_list can be empty if we only have a non-IOMMU backed mdev attached. We don't currently check if the list is empty before getting the first entry in the list, which leads to a bogus domain pointer. If a vfio_dma entry is erroneously marked as iommu_mapped, we'll attempt to use that bogus pointer to retrieve the existing physical page addresses.

This is the scenario that uncovered this issue, attempting to hot-add a vfio-pci device to a container with an existing mdev device and DMA mappings, one of which could not be pinned, causing a failure adding the new group to the existing container and setting the conditions for a subsequent attempt to explode.

To resolve this, we can first check if the domain_list is empty so that we can reject replay of a bogus domain, should we ever encounter this inconsistent state again in the future. The real fix though is to add the necessary unwind support, which means cleaning up the current pinning if an IOMMU mapping fails, then walking back through the r-b tree of DMA entries, reading from the IOMMU which ranges are mapped, and unmapping and unpinning those ranges. To be able to do this, we also defer marking the DMA entry as IOMMU mapped until all entries are processed, in order to allow the unwind to know the disposition of each entry.

Fixes a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
---
 drivers/vfio/vfio_iommu_type1.c | 71 ++++++++++++++++++++++++++++++---
 1 file changed, 66 insertions(+), 5 deletions(-)
drivers/vfio/vfio_iommu_type1.c +66 -5
index 6dbdadb936a89..52083b710b87e 100644
@@ -1193,13 +1193,16 @@ static int vfio_bus_type(struct device *dev, void *data)
 static int vfio_iommu_replay(struct vfio_iommu *iommu,
 			     struct vfio_domain *domain)
 {
-	struct vfio_domain *d;
+	struct vfio_domain *d = NULL;
 	struct rb_node *n;
 	unsigned long limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
 	int ret;
 
 	/* Arbitrarily pick the first domain in the list for lookups */
-	d = list_first_entry(&iommu->domain_list, struct vfio_domain, next);
+	if (!list_empty(&iommu->domain_list))
+		d = list_first_entry(&iommu->domain_list,
+				     struct vfio_domain, next);
+
 	n = rb_first(&iommu->dma_list);
 
 	for (; n; n = rb_next(n)) {
@@ -1217,6 +1220,11 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu,
 				phys_addr_t p;
 				dma_addr_t i;
 
+				if (WARN_ON(!d)) { /* mapped w/o a domain?! */
+					ret = -EINVAL;
+					goto unwind;
+				}
+
 				phys = iommu_iova_to_phys(d->domain, iova);
 
 				if (WARN_ON(!phys)) {
@@ -1246,7 +1254,7 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu,
 				if (npage <= 0) {
 					WARN_ON(!npage);
 					ret = (int)npage;
-					return ret;
+					goto unwind;
 				}
 
 				phys = pfn << PAGE_SHIFT;
@@ -1255,14 +1263,67 @@ static int vfio_iommu_replay(struct vfio_iommu *iommu,
 
 			ret = iommu_map(domain->domain, iova, phys,
 					size, dma->prot | domain->prot);
-			if (ret)
-				return ret;
+			if (ret) {
+				if (!dma->iommu_mapped)
+					vfio_unpin_pages_remote(dma, iova,
+							phys >> PAGE_SHIFT,
+							size >> PAGE_SHIFT,
+							true);
+				goto unwind;
+			}
 
 			iova += size;
 		}
+	}
+
+	/* All dmas are now mapped, defer to second tree walk for unwind */
+	for (n = rb_first(&iommu->dma_list); n; n = rb_next(n)) {
+		struct vfio_dma *dma = rb_entry(n, struct vfio_dma, node);
+
 		dma->iommu_mapped = true;
 	}
+
 	return 0;
+
+unwind:
+	for (; n; n = rb_prev(n)) {
+		struct vfio_dma *dma = rb_entry(n, struct vfio_dma, node);
+		dma_addr_t iova;
+
+		if (dma->iommu_mapped) {
+			iommu_unmap(domain->domain, dma->iova, dma->size);
+			continue;
+		}
+
+		iova = dma->iova;
+		while (iova < dma->iova + dma->size) {
+			phys_addr_t phys, p;
+			size_t size;
+			dma_addr_t i;
+
+			phys = iommu_iova_to_phys(domain->domain, iova);
+			if (!phys) {
+				iova += PAGE_SIZE;
+				continue;
+			}
+
+			size = PAGE_SIZE;
+			p = phys + size;
+			i = iova + size;
+			while (i < dma->iova + dma->size &&
+			       p == iommu_iova_to_phys(domain->domain, i)) {
+				size += PAGE_SIZE;
+				p += PAGE_SIZE;
+				i += PAGE_SIZE;
+			}
+
+			iommu_unmap(domain->domain, iova, size);
+			vfio_unpin_pages_remote(dma, iova, phys >> PAGE_SHIFT,
+						size >> PAGE_SHIFT, true);
+		}
+	}
+
+	return ret;
 }
 
 /*
Signature · 1 line
2.25.1
author maintainer
#73 lore raw

PATCH 68/71 do_epoll_ctl(): clean the failure exits up a bit

In reply to Greg Kroah-Hartman

From: Al Viro <[email protected]>

commit 52c479697c9b73f628140dcdfcd39ea302d05482 upstream.

---
 fs/eventpoll.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
fs/eventpoll.c +4 -6
@@ -2094,10 +2094,8 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 			mutex_lock(&epmutex);
 			if (is_file_epoll(tf.file)) {
 				error = -ELOOP;
-				if (ep_loop_check(ep, tf.file) != 0) {
-					clear_tfile_check_list();
+				if (ep_loop_check(ep, tf.file) != 0)
 					goto error_tgt_fput;
-				}
 			} else {
 				get_file(tf.file);
 				list_add(&tf.file->f_tfile_llink,
@@ -2126,8 +2124,6 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 			error = ep_insert(ep, &epds, tf.file, fd, full_check);
 		} else
 			error = -EEXIST;
-		if (full_check)
-			clear_tfile_check_list();
 		break;
 	case EPOLL_CTL_DEL:
 		if (epi)
@@ -2150,8 +2146,10 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 	mutex_unlock(&ep->mtx);
 
 error_tgt_fput:
-	if (full_check)
+	if (full_check) {
+		clear_tfile_check_list();
 		mutex_unlock(&epmutex);
+	}
 
 	fdput(tf);
 error_fput:
author maintainer
#74 lore raw

PATCH 69/71 mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

In reply to Greg Kroah-Hartman

From: Peter Xu <[email protected]>

commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream.

This is found by code observation only.

Firstly, the worst case scenario should assume the whole range was covered by pmd sharing. The old algorithm might not work as expected for ranges like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the expected range should be (0, 2g).

Since at it, remove the loop since it should not be required. With that, the new code should be faster too when the invalidating range is huge.

Mike said:

: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only : adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable. The original reason for adjusting the range was to : prevent data corruption (getting wrong page). Since the range is not : always adjusted correctly, the potential for corruption still exists. :
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible : is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results. :
: To be safe, let's just cc stable.

Fixes 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages")
Cc Andrea Arcangeli <[email protected]>
Cc Matthew Wilcox <[email protected]>
---
 mm/hugetlb.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)
mm/hugetlb.c +10 -14
@@ -4650,25 +4650,21 @@ static bool vma_shareable(struct vm_area
 void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma,
 				unsigned long *start, unsigned long *end)
 {
-	unsigned long check_addr = *start;
+	unsigned long a_start, a_end;
 
 	if (!(vma->vm_flags & VM_MAYSHARE))
 		return;
 
-	for (check_addr = *start; check_addr < *end; check_addr += PUD_SIZE) {
-		unsigned long a_start = check_addr & PUD_MASK;
-		unsigned long a_end = a_start + PUD_SIZE;
+	/* Extend the range to be PUD aligned for a worst case scenario */
+	a_start = ALIGN_DOWN(*start, PUD_SIZE);
+	a_end = ALIGN(*end, PUD_SIZE);
 
-		/*
-		 * If sharing is possible, adjust start/end if necessary.
-		 */
-		if (range_in_vma(vma, a_start, a_end)) {
-			if (a_start < *start)
-				*start = a_start;
-			if (a_end > *end)
-				*end = a_end;
-		}
-	}
+	/*
+	 * Intersect the range with the vma range, since pmd sharing won't be
+	 * across vma after all
+	 */
+	*start = max(vma->vm_start, a_start);
+	*end = min(vma->vm_end, a_end);
 }
 
 /*
author maintainer
#55 lore raw

PATCH 52/71 kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode

In reply to Greg Kroah-Hartman

From: Jim Mattson <[email protected]>

[ Upstream commit 427890aff8558eb4326e723835e0eae0e6fe3102 ]

See the SDM, volume 3, section 4.4.1:

If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3.

Fixes 0be0226f07d14 ("KVM: MMU: fix SMAP virtualization")
Cc Xiao Guangrong <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/x86.c +1 -1
index 5b2440e591fc1..ff1f764c4709a 100644
@@ -857,7 +857,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long old_cr4 = kvm_read_cr4(vcpu);
 	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
-				   X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE;
+				   X86_CR4_SMEP | X86_CR4_PKE;
 
 	if (kvm_valid_cr4(vcpu, cr4))
 		return 1;
Signature · 1 line
2.25.1
author maintainer
#61 lore raw

PATCH 58/71 RDMA/bnxt_re: Do not add user qps to flushlist

In reply to Greg Kroah-Hartman

From: Selvin Xavier <[email protected]>

[ Upstream commit a812f2d60a9fb7818f9c81f967180317b52545c0 ]

Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not.

Add a check to avoid user qp addition to the flush list.

Fixes 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Fixes c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl")
---
 drivers/infiniband/hw/bnxt_re/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/hw/bnxt_re/main.c +2 -1
index 589b0d4677d52..f1b666c80f368 100644
@@ -753,7 +753,8 @@ static int bnxt_re_handle_qp_async_event(struct creq_qp_event *qp_event,
 	struct ib_event event;
 	unsigned int flags;
 
-	if (qp->qplib_qp.state == CMDQ_MODIFY_QP_NEW_STATE_ERR) {
+	if (qp->qplib_qp.state == CMDQ_MODIFY_QP_NEW_STATE_ERR &&
+	    rdma_is_kernel_res(&qp->ib_qp.res)) {
 		flags = bnxt_re_lock_cqs(qp);
 		bnxt_qplib_add_flush_qp(&qp->qplib_qp);
 		bnxt_re_unlock_cqs(qp, flags);
Signature · 1 line
2.25.1
author maintainer
#62 lore raw

PATCH 59/71 afs: Fix NULL deref in afs_dynroot_depopulate()

In reply to Greg Kroah-Hartman

From: David Howells <[email protected]>

[ Upstream commit 5e0b17b026eb7c6de9baa9b0d45a51b05f05abe1 ]

If an error occurs during the construction of an afs superblock, it's possible that an error occurs after a superblock is created, but before we've created the root dentry. If the superblock has a dynamic root (ie. what's normally mounted on /afs), the afs_kill_super() will call afs_dynroot_depopulate() to unpin any created dentries - but this will oops if the root hasn't been created yet.

Fix this by skipping that bit of code if there is no root dentry.

This leads to an oops looking like:

	general protection fault, ...
	KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
	...
	RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
	...
	Call Trace:
	 afs_kill_super+0x13b/0x180 fs/afs/super.c:535
	 deactivate_locked_super+0x94/0x160 fs/super.c:335
	 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
	 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
	 do_new_mount fs/namespace.c:2875 [inline]
	 path_mount+0x1387/0x2070 fs/namespace.c:3192
	 do_mount fs/namespace.c:3205 [inline]
	 __do_sys_mount fs/namespace.c:3413 [inline]
	 __se_sys_mount fs/namespace.c:3390 [inline]
	 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
	 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

which is oopsing on this line:

	inode_lock(root->d_inode);

presumably because sb->s_root was NULL.

Fixes 0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount")
Reported-by [email protected]
---
 fs/afs/dynroot.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
fs/afs/dynroot.c +11 -9
index 069273a2483f9..fc6c42eeb659c 100644
@@ -299,15 +299,17 @@ void afs_dynroot_depopulate(struct super_block *sb)
 		net->dynroot_sb = NULL;
 	mutex_unlock(&net->proc_cells_lock);
 
-	inode_lock(root->d_inode);
-
-	/* Remove all the pins for dirs created for manually added cells */
-	list_for_each_entry_safe(subdir, tmp, &root->d_subdirs, d_child) {
-		if (subdir->d_fsdata) {
-			subdir->d_fsdata = NULL;
-			dput(subdir);
+	if (root) {
+		inode_lock(root->d_inode);
+
+		/* Remove all the pins for dirs created for manually added cells */
+		list_for_each_entry_safe(subdir, tmp, &root->d_subdirs, d_child) {
+			if (subdir->d_fsdata) {
+				subdir->d_fsdata = NULL;
+				dput(subdir);
+			}
 		}
-	}
 
-	inode_unlock(root->d_inode);
+		inode_unlock(root->d_inode);
+	}
 }
Signature · 1 line
2.25.1
author maintainer
#76 lore raw

PATCH 71/71 clk: Evict unregistered clks from parent caches

In reply to Greg Kroah-Hartman

From: Stephen Boyd <[email protected]>

commit bdcf1dc253248542537a742ae1e7ccafdd03f2d3 upstream.

We leave a dangling pointer in each clk_core::parents array that has an unregistered clk as a potential parent when that clk_core pointer is freed by clk{_hw}_unregister(). It is impossible for the true parent of a clk to be set with clk_set_parent() once the dangling pointer is left in the cache because we compare parent pointers in clk_fetch_parent_index() instead of checking for a matching clk name or clk_hw pointer.

Before commit ede77858473a ("clk: Remove global clk traversal on fetch parent index"), we would check clk_hw pointers, which has a higher chance of being the same between registration and unregistration, but it can still be allocated and freed by the clk provider. In fact, this has been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()") where we stopped trying to compare clk names and skipped over entries in the cache that weren't NULL.

There are good (performance) reasons to not do the global tree lookup in cases where the cache holds dangling pointers to parents that have been unregistered. Let's take the performance hit on the uncommon registration path instead. Loop through all the clk_core::parents arrays when a clk is unregistered and set the entry to NULL when the parent cache entry and clk being unregistered are the same pointer. This will fix this problem and avoid the overhead for the "normal" case.

Based on a patch by Bjorn Andersson.

---
 drivers/clk/clk.c |   52 +++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 41 insertions(+), 11 deletions(-)
drivers/clk/clk.c +41 -11
@@ -40,6 +40,17 @@ static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
+static struct hlist_head *all_lists[] = {
+	&clk_root_list,
+	&clk_orphan_list,
+	NULL,
+};
+
+static struct hlist_head *orphan_list[] = {
+	&clk_orphan_list,
+	NULL,
+};
+
 /***    private data structures    ***/
 
 struct clk_core {
@@ -2618,17 +2629,6 @@ static int inited = 0;
 static DEFINE_MUTEX(clk_debug_lock);
 static HLIST_HEAD(clk_debug_list);
 
-static struct hlist_head *all_lists[] = {
-	&clk_root_list,
-	&clk_orphan_list,
-	NULL,
-};
-
-static struct hlist_head *orphan_list[] = {
-	&clk_orphan_list,
-	NULL,
-};
-
 static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 				 int level)
 {
@@ -3328,6 +3328,34 @@ static const struct clk_ops clk_nodrv_op
 	.set_parent	= clk_nodrv_set_parent,
 };
 
+static void clk_core_evict_parent_cache_subtree(struct clk_core *root,
+						struct clk_core *target)
+{
+	int i;
+	struct clk_core *child;
+
+	for (i = 0; i < root->num_parents; i++)
+		if (root->parents[i] == target)
+			root->parents[i] = NULL;
+
+	hlist_for_each_entry(child, &root->children, child_node)
+		clk_core_evict_parent_cache_subtree(child, target);
+}
+
+/* Remove this clk from all parent caches */
+static void clk_core_evict_parent_cache(struct clk_core *core)
+{
+	struct hlist_head **lists;
+	struct clk_core *root;
+
+	lockdep_assert_held(&prepare_lock);
+
+	for (lists = all_lists; *lists; lists++)
+		hlist_for_each_entry(root, *lists, child_node)
+			clk_core_evict_parent_cache_subtree(root, core);
+
+}
+
 /**
  * clk_unregister - unregister a currently registered clock
  * @clk: clock to unregister
@@ -3366,6 +3394,8 @@ void clk_unregister(struct clk *clk)
 			clk_core_set_parent_nolock(child, NULL);
 	}
 
+	clk_core_evict_parent_cache(clk->core);
+
 	hlist_del_init(&clk->core->child_node);
 
 	if (clk->core->prepare_count)
author maintainer
#57 lore raw

PATCH 54/71 kconfig: qconf: do not limit the pop-up menu to the first row

In reply to Greg Kroah-Hartman

From: Masahiro Yamada <[email protected]>

[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ]

If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check:

  if (e->y() <= header()->geometry().bottom()) {

Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case.

Since the origin of e->y() starts from the bottom of the header, this check is odd.

Going forward, you can right-click anywhere in the tree to get the pop-up menu.

---
 scripts/kconfig/qconf.cc | 68 ++++++++++++++++++++--------------------
 1 file changed, 34 insertions(+), 34 deletions(-)
scripts/kconfig/qconf.cc +34 -34
index 8f004db6f6034..294d4329f4810 100644
@@ -869,40 +869,40 @@ void ConfigList::focusInEvent(QFocusEvent *e)
 
 void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 {
-	if (e->y() <= header()->geometry().bottom()) {
-		if (!headerPopup) {
-			QAction *action;
-
-			headerPopup = new QMenu(this);
-			action = new QAction("Show Name", this);
-			  action->setCheckable(true);
-			  connect(action, SIGNAL(toggled(bool)),
-				  parent(), SLOT(setShowName(bool)));
-			  connect(parent(), SIGNAL(showNameChanged(bool)),
-				  action, SLOT(setOn(bool)));
-			  action->setChecked(showName);
-			  headerPopup->addAction(action);
-			action = new QAction("Show Range", this);
-			  action->setCheckable(true);
-			  connect(action, SIGNAL(toggled(bool)),
-				  parent(), SLOT(setShowRange(bool)));
-			  connect(parent(), SIGNAL(showRangeChanged(bool)),
-				  action, SLOT(setOn(bool)));
-			  action->setChecked(showRange);
-			  headerPopup->addAction(action);
-			action = new QAction("Show Data", this);
-			  action->setCheckable(true);
-			  connect(action, SIGNAL(toggled(bool)),
-				  parent(), SLOT(setShowData(bool)));
-			  connect(parent(), SIGNAL(showDataChanged(bool)),
-				  action, SLOT(setOn(bool)));
-			  action->setChecked(showData);
-			  headerPopup->addAction(action);
-		}
-		headerPopup->exec(e->globalPos());
-		e->accept();
-	} else
-		e->ignore();
+	if (!headerPopup) {
+		QAction *action;
+
+		headerPopup = new QMenu(this);
+		action = new QAction("Show Name", this);
+		action->setCheckable(true);
+		connect(action, SIGNAL(toggled(bool)),
+			parent(), SLOT(setShowName(bool)));
+		connect(parent(), SIGNAL(showNameChanged(bool)),
+			action, SLOT(setOn(bool)));
+		action->setChecked(showName);
+		headerPopup->addAction(action);
+
+		action = new QAction("Show Range", this);
+		action->setCheckable(true);
+		connect(action, SIGNAL(toggled(bool)),
+			parent(), SLOT(setShowRange(bool)));
+		connect(parent(), SIGNAL(showRangeChanged(bool)),
+			action, SLOT(setOn(bool)));
+		action->setChecked(showRange);
+		headerPopup->addAction(action);
+
+		action = new QAction("Show Data", this);
+		action->setCheckable(true);
+		connect(action, SIGNAL(toggled(bool)),
+			parent(), SLOT(setShowData(bool)));
+		connect(parent(), SIGNAL(showDataChanged(bool)),
+			action, SLOT(setOn(bool)));
+		action->setChecked(showData);
+		headerPopup->addAction(action);
+	}
+
+	headerPopup->exec(e->globalPos());
+	e->accept();
 }
 
 ConfigView*ConfigView::viewList;
Signature · 1 line
2.25.1
author maintainer
#53 lore raw

PATCH 50/71 ASoC: intel: Fix memleak in sst_media_open

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 062fa09f44f4fb3776a23184d5d296b0c8872eb9 ]

When power_up_sst() fails, stream needs to be freed just like when try_module_get() fails. However, current code is returning directly and ends up leaking memory.

Fixes 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp")
---
 sound/soc/intel/atom/sst-mfld-platform-pcm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
sound/soc/intel/atom/sst-mfld-platform-pcm.c +3 -2
index 6868e71e3a3f0..0572c3c964506 100644
@@ -339,7 +339,7 @@ static int sst_media_open(struct snd_pcm_substream *substream,
 
 	ret_val = power_up_sst(stream);
 	if (ret_val < 0)
-		return ret_val;
+		goto out_power_up;
 
 	/* Make sure, that the period size is always even */
 	snd_pcm_hw_constraint_step(substream->runtime, 0,
@@ -348,8 +348,9 @@ static int sst_media_open(struct snd_pcm_substream *substream,
 	return snd_pcm_hw_constraint_integer(runtime,
 			 SNDRV_PCM_HW_PARAM_PERIODS);
 out_ops:
-	kfree(stream);
 	mutex_unlock(&sst_lock);
+out_power_up:
+	kfree(stream);
 	return ret_val;
 }
 
Signature · 1 line
2.25.1
author maintainer
#60 lore raw

PATCH 57/71 Fix build error when CONFIG_ACPI is not set/enabled:

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit ee87e1557c42dc9c2da11c38e11b87c311569853 ]

../arch/x86/pci/xen.c: In function ‘pci_xen_init’:
../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration]
acpi_noirq_set();

Fixes 88e9ca161c13 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef")
Cc Andy Shevchenko <[email protected]>
Cc Bjorn Helgaas <[email protected]>
Cc Konrad Rzeszutek Wilk <[email protected]>
---
 arch/x86/pci/xen.c | 1 +
 1 file changed, 1 insertion(+)
arch/x86/pci/xen.c +1 -0
index 9112d1cb397bb..22da9bfd8a458 100644
@@ -25,6 +25,7 @@
 #include <asm/xen/pci.h>
 #include <asm/xen/cpuid.h>
 #include <asm/apic.h>
+#include <asm/acpi.h>
 #include <asm/i8259.h>
 
 static int xen_pcifront_enable_irq(struct pci_dev *dev)
Signature · 1 line
2.25.1
author maintainer
#59 lore raw

PATCH 56/71 efi: avoid error message when booting under Xen

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

[ Upstream commit 6163a985e50cb19d5bdf73f98e45b8af91a77658 ]

efifb_probe() will issue an error message in case the kernel is booted as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.

Fixes 38ac0287b7f4 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
---
 drivers/video/fbdev/efifb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/efifb.c +1 -1
index cc1006375cacb..f50cc1a7c31a9 100644
@@ -449,7 +449,7 @@ static int efifb_probe(struct platform_device *dev)
 	info->apertures->ranges[0].base = efifb_fix.smem_start;
 	info->apertures->ranges[0].size = size_remap;
 
-	if (efi_enabled(EFI_BOOT) &&
+	if (efi_enabled(EFI_MEMMAP) &&
 	    !efi_mem_desc_lookup(efifb_fix.smem_start, &md)) {
 		if ((efifb_fix.smem_start + efifb_fix.smem_len) >
 		    (md.phys_addr + (md.num_pages << EFI_PAGE_SHIFT))) {
Signature · 1 line
2.25.1
author maintainer
#58 lore raw

PATCH 55/71 kconfig: qconf: fix signal connection to invalid slots

In reply to Greg Kroah-Hartman

From: Masahiro Yamada <[email protected]>

[ Upstream commit d85de3399f97467baa2026fbbbe587850d01ba8a ]

If you right-click in the ConfigList window, you will see the following messages in the console:

QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')

Right, there is no such slot in QAction. I think this is a typo of setChecked.

Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this.

Fixes d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
---
 scripts/kconfig/qconf.cc | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
scripts/kconfig/qconf.cc +4 -4
index 294d4329f4810..1ee33d2e15bf8 100644
@@ -878,7 +878,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		connect(action, SIGNAL(toggled(bool)),
 			parent(), SLOT(setShowName(bool)));
 		connect(parent(), SIGNAL(showNameChanged(bool)),
-			action, SLOT(setOn(bool)));
+			action, SLOT(setChecked(bool)));
 		action->setChecked(showName);
 		headerPopup->addAction(action);
 
@@ -887,7 +887,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		connect(action, SIGNAL(toggled(bool)),
 			parent(), SLOT(setShowRange(bool)));
 		connect(parent(), SIGNAL(showRangeChanged(bool)),
-			action, SLOT(setOn(bool)));
+			action, SLOT(setChecked(bool)));
 		action->setChecked(showRange);
 		headerPopup->addAction(action);
 
@@ -896,7 +896,7 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		connect(action, SIGNAL(toggled(bool)),
 			parent(), SLOT(setShowData(bool)));
 		connect(parent(), SIGNAL(showDataChanged(bool)),
-			action, SLOT(setOn(bool)));
+			action, SLOT(setChecked(bool)));
 		action->setChecked(showData);
 		headerPopup->addAction(action);
 	}
@@ -1228,7 +1228,7 @@ QMenu* ConfigInfoView::createStandardContextMenu(const QPoint & pos)
 
 	action->setCheckable(true);
 	connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
-	connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
+	connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setChecked(bool)));
 	action->setChecked(showDebug());
 	popup->addSeparator();
 	popup->addAction(action);
Signature · 1 line
2.25.1
author maintainer
#72 lore raw

PATCH 67/71 epoll: Keep a reference on files added to the check list

In reply to Greg Kroah-Hartman

From: Marc Zyngier <[email protected]>

commit a9ed4a6560b8562b7e2e2bed9527e88001f7b682 upstream.

When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed.

However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet.

---
 fs/eventpoll.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
fs/eventpoll.c +7 -2
@@ -1890,9 +1890,11 @@ static int ep_loop_check_proc(void *priv
 			 * not already there, and calling reverse_path_check()
 			 * during ep_insert().
 			 */
-			if (list_empty(&epi->ffd.file->f_tfile_llink))
+			if (list_empty(&epi->ffd.file->f_tfile_llink)) {
+				get_file(epi->ffd.file);
 				list_add(&epi->ffd.file->f_tfile_llink,
 					 &tfile_check_list);
+			}
 		}
 	}
 	mutex_unlock(&ep->mtx);
@@ -1936,6 +1938,7 @@ static void clear_tfile_check_list(void)
 		file = list_first_entry(&tfile_check_list, struct file,
 					f_tfile_llink);
 		list_del_init(&file->f_tfile_llink);
+		fput(file);
 	}
 	INIT_LIST_HEAD(&tfile_check_list);
 }
@@ -2095,9 +2098,11 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
 					clear_tfile_check_list();
 					goto error_tgt_fput;
 				}
-			} else
+			} else {
+				get_file(tf.file);
 				list_add(&tf.file->f_tfile_llink,
 							&tfile_check_list);
+			}
 			mutex_lock_nested(&ep->mtx, 0);
 			if (is_file_epoll(tf.file)) {
 				tep = tf.file->private_data;
author maintainer
#56 lore raw

PATCH 53/71 kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode

In reply to Greg Kroah-Hartman

From: Jim Mattson <[email protected]>

[ Upstream commit cb957adb4ea422bd758568df5b2478ea3bb34f35 ]

See the SDM, volume 3, section 4.4.1:

If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3.

Fixes b9baba8614890 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc Huaitong Han <[email protected]>

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/x86.c +1 -1
index ff1f764c4709a..430a4bc66f604 100644
@@ -857,7 +857,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long old_cr4 = kvm_read_cr4(vcpu);
 	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
-				   X86_CR4_SMEP | X86_CR4_PKE;
+				   X86_CR4_SMEP;
 
 	if (kvm_valid_cr4(vcpu, cr4))
 		return 1;
Signature · 1 line
2.25.1
author maintainer
#75 lore raw

PATCH 70/71 xen: dont reschedule in preemption off sections

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

For support of long running hypercalls xen_maybe_preempt_hcall() is calling cond_resched() in case a hypercall marked as preemptible has been interrupted.

Normally this is no problem, as only hypercalls done via some ioctl()s are marked to be preemptible. In rare cases when during such a preemptible hypercall an interrupt occurs and any softirq action is started from irq_exit(), a further hypercall issued by the softirq handler will be regarded to be preemptible, too. This might lead to rescheduling in spite of the softirq handler potentially having set preempt_disable(), leading to splats like:

BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl
INFO: lockdep is turned off.
CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1
Call Trace:
<IRQ>
dump_stack+0x8f/0xd0
___might_sleep.cold.76+0xb2/0x103
xen_maybe_preempt_hcall+0x48/0x70
xen_do_hypervisor_callback+0x37/0x40
RIP: e030:xen_hypercall_xen_version+0xa/0x20
Code: ...
RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246
RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a
RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0
R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000
? xen_hypercall_xen_version+0xa/0x20
? xen_force_evtchn_callback+0x9/0x10
? check_events+0x12/0x20
? xen_restore_fl_direct+0x1f/0x20
? _raw_spin_unlock_irqrestore+0x53/0x60
? debug_dma_sync_single_for_cpu+0x91/0xc0
? _raw_spin_unlock_irqrestore+0x53/0x60
? xen_swiotlb_sync_single_for_cpu+0x3d/0x140
? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en]
? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en]
? net_rx_action+0x151/0x4a0
? __do_softirq+0xed/0x55b
? irq_exit+0xea/0x100
? xen_evtchn_do_upcall+0x2c/0x40
? xen_do_hypervisor_callback+0x29/0x40
</IRQ>
? xen_hypercall_domctl+0xa/0x20
? xen_hypercall_domctl+0x8/0x20
? privcmd_ioctl+0x221/0x990 [xen_privcmd]
? do_vfs_ioctl+0xa5/0x6f0
? ksys_ioctl+0x60/0x90
? trace_hardirqs_off_thunk+0x1a/0x20
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x62/0x250
? entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix that by testing preempt_count() before calling cond_resched().

In kernel 5.8 this can't happen any more due to the entry code rework (more than 100 patches, so not a candidate for backporting).

The issue was introduced in kernel 4.3, so this patch should go into all stable kernels in [4.3 ... 5.7].

Fixes 0fa2f5cb2b0ecd8 ("sched/preempt, xen: Use need_resched() instead of should_resched()")
Cc Sarah Newman <[email protected]>
---
 drivers/xen/preempt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/xen/preempt.c +1 -1
@@ -31,7 +31,7 @@ EXPORT_SYMBOL_GPL(xen_in_preemptible_hca
 asmlinkage __visible void xen_maybe_preempt_hcall(void)
 {
 	if (unlikely(__this_cpu_read(xen_in_preemptible_hcall)
-		     && need_resched())) {
+		     && need_resched() && !preempt_count())) {
 		/*
 		 * Clear flag as we may be rescheduled on a different
 		 * cpu.
author maintainer
#68 lore raw

PATCH 65/71 powerpc/pseries: Do not initiate shutdown when system is running on UPS

In reply to Greg Kroah-Hartman

From: Vasant Hegde <[email protected]>

commit 90a9b102eddf6a3f987d15f4454e26a2532c1c98 upstream.

As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action.

In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":

SYSTEM_SHUTDOWN 3

The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.)

Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier":

For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high
All other values = reserved

We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system.

Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS.

Fixes 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
[mpe: Massage change log and add PAPR references]
---
 arch/powerpc/platforms/pseries/ras.c |    1 -
 1 file changed, 1 deletion(-)
arch/powerpc/platforms/pseries/ras.c +0 -1
@@ -118,7 +118,6 @@ static void handle_system_shutdown(char
 	case EPOW_SHUTDOWN_ON_UPS:
 		pr_emerg("Loss of system power detected. System is running on"
 			 " UPS/battery. Check RTAS error log for details\n");
-		orderly_poweroff(true);
 		break;
 
 	case EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS:
author maintainer
#51 lore raw

PATCH 48/71 s390/ptrace: fix storage key handling

In reply to Greg Kroah-Hartman

From: Heiko Carstens <[email protected]>

[ Upstream commit fd78c59446b8d050ecf3e0897c5a486c7de7c595 ]

The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one.
Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero.

Fixes 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set")
---
 arch/s390/kernel/ptrace.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
arch/s390/kernel/ptrace.c +5 -2
index 65fefbf61e1ca..3ffa2847c110b 100644
@@ -1286,7 +1286,6 @@ static bool is_ri_cb_valid(struct runtime_instr_cb *cb)
 		cb->pc == 1 &&
 		cb->qc == 0 &&
 		cb->reserved2 == 0 &&
-		cb->key == PAGE_DEFAULT_KEY &&
 		cb->reserved3 == 0 &&
 		cb->reserved4 == 0 &&
 		cb->reserved5 == 0 &&
@@ -1350,7 +1349,11 @@ static int s390_runtime_instr_set(struct task_struct *target,
 		kfree(data);
 		return -EINVAL;
 	}
-
+	/*
+	 * Override access key in any case, since user space should
+	 * not be able to set it, nor should it care about it.
+	 */
+	ri_cb.key = PAGE_DEFAULT_KEY >> 4;
 	preempt_disable();
 	if (!target->thread.ri_cb)
 		target->thread.ri_cb = data;
Signature · 1 line
2.25.1
author maintainer
#67 lore raw

PATCH 64/71 net: dsa: b53: check for timeout

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ]

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will also be garbage

        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one.

Fixes 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
---
 drivers/net/dsa/b53/b53_common.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/dsa/b53/b53_common.c +2 -0
index 11f3993ab7f30..294be86420b6d 100644
@@ -1335,6 +1335,8 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
 		return ret;
 
 	switch (ret) {
+	case -ETIMEDOUT:
+		return ret;
 	case -ENOSPC:
 		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
 			addr, vid);
Signature · 1 line
2.25.1
author maintainer
#64 lore raw

PATCH 61/71 net: ena: Prevent reset after device destruction

In reply to Greg Kroah-Hartman

From: Shay Agroskin <[email protected]>

[ Upstream commit 63d4a4c145cca2e84dc6e62d2ef5cb990c9723c2 ]

The reset work is scheduled by the timer routine whenever it detects that a device reset is required (e.g. when a keep_alive signal is missing).
When releasing device resources in ena_destroy_device() the driver cancels the scheduling of the timer routine without destroying the reset work explicitly.

This creates the following bug:
The driver is suspended and the ena_suspend() function is called
-> This function calls ena_destroy_device() to free the net device
resources
-> The driver waits for the timer routine to finish its execution and then cancels it, thus preventing from it to be called again.

If, in its final execution, the timer routine schedules a reset, the reset routine might be called afterwards,and a redundant call to ena_restore_device() would be made.

By changing the reset routine we allow it to read the device's state accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set before resetting the device and making both the destruction function and the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction routine. Also surround the flag check with 'likely' because we expect that the reset routine would be called only when ENA_FLAG_TRIGGER_RESET flag is set.

The destruction of the timer and reset services in __ena_shutoff() have to stay, even though the timer routine is destroyed in ena_destroy_device(). This is to avoid a case in which the reset routine is scheduled after free_netdev() in __ena_shutoff(), which would create an access to freed memory in adapter->flags.

Fixes 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver")
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/net/ethernet/amazon/ena/ena_netdev.c +10 -9
index 8736718b17359..55cc70ba5b093 100644
@@ -2647,16 +2647,14 @@ static void ena_fw_reset_device(struct work_struct *work)
 {
 	struct ena_adapter *adapter =
 		container_of(work, struct ena_adapter, reset_task);
-	struct pci_dev *pdev = adapter->pdev;
 
-	if (unlikely(!test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags))) {
-		dev_err(&pdev->dev,
-			"device reset schedule while reset bit is off\n");
-		return;
-	}
 	rtnl_lock();
-	ena_destroy_device(adapter, false);
-	ena_restore_device(adapter);
+
+	if (likely(test_bit(ENA_FLAG_TRIGGER_RESET, &adapter->flags))) {
+		ena_destroy_device(adapter, false);
+		ena_restore_device(adapter);
+	}
+
 	rtnl_unlock();
 }
 
@@ -3392,8 +3390,11 @@ static void ena_remove(struct pci_dev *pdev)
 		netdev->rx_cpu_rmap = NULL;
 	}
 #endif /* CONFIG_RFS_ACCEL */
-	del_timer_sync(&adapter->timer_service);
 
+	/* Make sure timer and reset routine won't be called after
+	 * freeing device resources.
+	 */
+	del_timer_sync(&adapter->timer_service);
 	cancel_work_sync(&adapter->reset_task);
 
 	unregister_netdev(netdev);
Signature · 1 line
2.25.1
author maintainer
#63 lore raw

PATCH 60/71 bonding: fix active-backup failover for current ARP slave

In reply to Greg Kroah-Hartman

From: Jiri Wiesner <[email protected]>

[ Upstream commit 0410d07190961ac526f05085765a8d04d926545b ]

When the ARP monitor is used for link detection, ARP replies are validated for all slaves (arp_validate=3) and fail_over_mac is set to active, two slaves of an active-backup bond may get stuck in a state where both of them are active and pass packets that they receive to the bond. This state makes IPv6 duplicate address detection fail. The state is reached thus:
1. The current active slave goes down because the ARP target is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave action has finished and the log is littered with "PROBE BAD" messages:

Quoted 1 line

bond0: PROBE: c_arp ens10 && cas ens11 BAD

The workaround is to remove the slave with "going back" status from the bond and re-enslave it. This issue was encountered when DPDK PMD interfaces were being enslaved to an active-backup bond.

I would be possible to fix the issue in bond_enslave() or bond_change_active_slave() but the ARP monitor was fixed instead to keep most of the actions changing the current ARP slave in the ARP monitor code. The current ARP slave is set as inactive and backup during the commit phase. A new state, BOND_LINK_FAIL, has been introduced for slaves in the context of the ARP monitor. This allows administrators to see how slaves are rotated for sending ARP requests and attempts are made to find a new active slave.

Fixes b2220cad583c9 ("bonding: refactor ARP active-backup monitor")
---
 drivers/net/bonding/bond_main.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/net/bonding/bond_main.c +16 -2
index ee7138a92d5e7..d32e32e791741 100644
@@ -2773,6 +2773,9 @@ static int bond_ab_arp_inspect(struct bonding *bond)
 			if (bond_time_in_interval(bond, last_rx, 1)) {
 				bond_propose_link_state(slave, BOND_LINK_UP);
 				commit++;
+			} else if (slave->link == BOND_LINK_BACK) {
+				bond_propose_link_state(slave, BOND_LINK_FAIL);
+				commit++;
 			}
 			continue;
 		}
@@ -2883,6 +2886,19 @@ static void bond_ab_arp_commit(struct bonding *bond)
 
 			continue;
 
+		case BOND_LINK_FAIL:
+			bond_set_slave_link_state(slave, BOND_LINK_FAIL,
+						  BOND_SLAVE_NOTIFY_NOW);
+			bond_set_slave_inactive_flags(slave,
+						      BOND_SLAVE_NOTIFY_NOW);
+
+			/* A slave has just been enslaved and has become
+			 * the current active slave.
+			 */
+			if (rtnl_dereference(bond->curr_active_slave))
+				RCU_INIT_POINTER(bond->current_arp_slave, NULL);
+			continue;
+
 		default:
 			netdev_err(bond->dev, "impossible: new_link %d on slave %s\n",
 				   slave->link_new_state, slave->dev->name);
@@ -2932,8 +2948,6 @@ static bool bond_ab_arp_probe(struct bonding *bond)
 			return should_notify_rtnl;
 	}
 
-	bond_set_slave_inactive_flags(curr_arp_slave, BOND_SLAVE_NOTIFY_LATER);
-
 	bond_for_each_slave_rcu(bond, slave, iter) {
 		if (!found && !before && bond_slave_is_up(slave))
 			before = slave;
Signature · 1 line
2.25.1
author maintainer
#20 lore raw

PATCH 18/71 drm/amd/display: fix pow() crashing when given base 0

In reply to Greg Kroah-Hartman

From: Krunoslav Kovac <[email protected]>

commit d2e59d0ff4c44d1f6f8ed884a5bea7d1bb7fd98c upstream.

[Why&How]
pow(a,x) is implemented as exp(x*log(a)). log(0) will crash. So return 0^x = 0, unless x=0, convention seems to be 0^0 = 1.

---
 drivers/gpu/drm/amd/display/include/fixed31_32.h |    3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/include/fixed31_32.h +3 -0
@@ -431,6 +431,9 @@ struct fixed31_32 dc_fixpt_log(struct fi
  */
 static inline struct fixed31_32 dc_fixpt_pow(struct fixed31_32 arg1, struct fixed31_32 arg2)
 {
+	if (arg1.value == 0)
+		return arg2.value == 0 ? dc_fixpt_one : dc_fixpt_zero;
+
 	return dc_fixpt_exp(
 		dc_fixpt_mul(
 			dc_fixpt_log(arg1),
author maintainer
#30 lore raw

PATCH 27/71 m68knommu: fix overwriting of bits in ColdFire V3 cache control

In reply to Greg Kroah-Hartman

From: Greg Ungerer <[email protected]>

[ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ]

The Cache Control Register (CACR) of the ColdFire V3 has bits that control high level caching functions, and also enable/disable the use of the alternate stack pointer register (the EUSP bit) to provide separate supervisor and user stack pointer registers. The code as it is today will blindly clear the EUSP bit on cache actions like invalidation. So it is broken for this case - and that will result in failed booting (interrupt entry and exit processing will be completely hosed).

This only affects ColdFire V3 parts that support the alternate stack register (like the 5329 for example) - generally speaking new parts do, older parts don't. It has no impact on ColdFire V3 parts with the single stack pointer, like the 5307 for example.

Fix the cache bit defines used, so they maintain the EUSP bit when carrying out cache actions through the CACR register.

---
 arch/m68k/include/asm/m53xxacr.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/m68k/include/asm/m53xxacr.h +3 -3
index 9138a624c5c81..692f90e7fecc1 100644
@@ -89,9 +89,9 @@
  * coherency though in all cases. And for copyback caches we will need
  * to push cached data as well.
  */
-#define CACHE_INIT	  CACR_CINVA
-#define CACHE_INVALIDATE  CACR_CINVA
-#define CACHE_INVALIDATED CACR_CINVA
+#define CACHE_INIT        (CACHE_MODE + CACR_CINVA - CACR_EC)
+#define CACHE_INVALIDATE  (CACHE_MODE + CACR_CINVA)
+#define CACHE_INVALIDATED (CACHE_MODE + CACR_CINVA)
 
 #define ACR0_MODE	((CONFIG_RAMBASE & 0xff000000) + \
 			 (0x000f0000) + \
Signature · 1 line
2.25.1
author maintainer
#29 lore raw

PATCH 26/71 Input: psmouse - add a newline when printing proto by sysfs

In reply to Greg Kroah-Hartman

From: Xiongfeng Wang <[email protected]>

[ Upstream commit 4aec14de3a15cf9789a0e19c847f164776f49473 ]

When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading.

root@syzkaller:~# cat /sys/module/psmouse/parameters/proto
autoroot@syzkaller:~#
---
 drivers/input/mouse/psmouse-base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/mouse/psmouse-base.c +1 -1
index d3ff1fc09af71..a9040c0fb4c3f 100644
@@ -2044,7 +2044,7 @@ static int psmouse_get_maxproto(char *buffer, const struct kernel_param *kp)
 {
 	int type = *((unsigned int *)kp->arg);
 
-	return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name);
+	return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name);
 }
 
 static int __init psmouse_init(void)
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 24/71 rtc: goldfish: Enable interrupt in set_alarm() when necessary

In reply to Greg Kroah-Hartman

From: Huacai Chen <[email protected]>

[ Upstream commit 22f8d5a1bf230cf8567a4121fc3789babb46336d ]

When use goldfish rtc, the "hwclock" command fails with "select() to /dev/rtc to wait for clock tick timed out". This is because "hwclock" need the set_alarm() hook to enable interrupt when alrm->enabled is true. This operation is missing in goldfish rtc (but other rtc drivers, such as cmos rtc, enable interrupt here), so add it.

---
 drivers/rtc/rtc-goldfish.c | 1 +
 1 file changed, 1 insertion(+)
drivers/rtc/rtc-goldfish.c +1 -0
index a1c44d0c85578..30cbe22c57a8e 100644
@@ -87,6 +87,7 @@ static int goldfish_rtc_set_alarm(struct device *dev,
 		rtc_alarm64 = rtc_alarm * NSEC_PER_SEC;
 		writel((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
 		writel(rtc_alarm64, base + TIMER_ALARM_LOW);
+		writel(1, base + TIMER_IRQ_ENABLED);
 	} else {
 		/*
 		 * if this function was called with enabled=0
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 23/71 media: budget-core: Improve exception handling in budget_register()

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

[ Upstream commit fc0456458df8b3421dba2a5508cd817fbc20ea71 ]

budget_register() has no error handling after its failure. Add the missed undo functions for error handling to fix it.

---
 drivers/media/pci/ttpci/budget-core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/media/pci/ttpci/budget-core.c +8 -3
index b3dc45b91101d..9b545c7431685 100644
@@ -383,20 +383,25 @@ static int budget_register(struct budget *budget)
 	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->hw_frontend);
 
 	if (ret < 0)
-		return ret;
+		goto err_release_dmx;
 
 	budget->mem_frontend.source = DMX_MEMORY_FE;
 	ret = dvbdemux->dmx.add_frontend(&dvbdemux->dmx, &budget->mem_frontend);
 	if (ret < 0)
-		return ret;
+		goto err_release_dmx;
 
 	ret = dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, &budget->hw_frontend);
 	if (ret < 0)
-		return ret;
+		goto err_release_dmx;
 
 	dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx);
 
 	return 0;
+
+err_release_dmx:
+	dvb_dmxdev_release(&budget->dmxdev);
+	dvb_dmx_release(&budget->demux);
+	return ret;
 }
 
 static void budget_unregister(struct budget *budget)
Signature · 1 line
2.25.1
author maintainer
#52 lore raw

PATCH 49/71 ASoC: msm8916-wcd-analog: fix register Interrupt offset

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

[ Upstream commit ff69c97ef84c9f7795adb49e9f07c9adcdd0c288 ]

For some reason interrupt set and clear register offsets are not set correctly.
This patch corrects them!

---
 sound/soc/codecs/msm8916-wcd-analog.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/msm8916-wcd-analog.c +2 -2
index cbdb6d4bb91ef..f4aba065c9257 100644
@@ -16,8 +16,8 @@
 
 #define CDC_D_REVISION1			(0xf000)
 #define CDC_D_PERPH_SUBTYPE		(0xf005)
-#define CDC_D_INT_EN_SET		(0x015)
-#define CDC_D_INT_EN_CLR		(0x016)
+#define CDC_D_INT_EN_SET		(0xf015)
+#define CDC_D_INT_EN_CLR		(0xf016)
 #define MBHC_SWITCH_INT			BIT(7)
 #define MBHC_MIC_ELECTRICAL_INS_REM_DET	BIT(6)
 #define MBHC_BUTTON_PRESS_DET		BIT(5)
Signature · 1 line
2.25.1
author maintainer
#49 lore raw

PATCH 46/71 bonding: fix a potential double-unregister

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ]

When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue.

If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice.

Workaround this special case by checking reg_state.

Fixes 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()")
Reported-by [email protected]
Cc Eric Dumazet <[email protected]>
Cc Andy Gospodarek <[email protected]>
Cc Jay Vosburgh <[email protected]>
---
 drivers/net/bonding/bond_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +2 -1
index 76fd5fc437ebe..ee7138a92d5e7 100644
@@ -2029,7 +2029,8 @@ static int  bond_release_and_destroy(struct net_device *bond_dev,
 	int ret;
 
 	ret = __bond_release_one(bond_dev, slave_dev, false, true);
-	if (ret == 0 && !bond_has_slaves(bond)) {
+	if (ret == 0 && !bond_has_slaves(bond) &&
+	    bond_dev->reg_state != NETREG_UNREGISTERING) {
 		bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
 		netdev_info(bond_dev, "Destroying bond %s\n",
 			    bond_dev->name);
Signature · 1 line
2.25.1
author maintainer
#32 lore raw

PATCH 29/71 xfs: fix inode quota reservation checks

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit f959b5d037e71a4d69b5bf71faffa065d9269b4a ]

xfs_trans_dqresv is the function that we use to make reservations against resource quotas. Each resource contains two counters: the q_core counter, which tracks resources allocated on disk; and the dquot reservation counter, which tracks how much of that resource has either been allocated or reserved by threads that are working on metadata updates.

For disk blocks, we compare the proposed reservation counter against the hard and soft limits to decide if we're going to fail the operation. However, for inodes we inexplicably compare against the q_core counter, not the incore reservation count.

Since the q_core counter is always lower than the reservation count and we unlock the dquot between reservation and transaction commit, this means that multiple threads can reserve the last inode count before we hit the hard limit, and when they commit, we'll be well over the hard limit.

Fix this by checking against the incore inode reservation counter, since we would appear to maintain that correctly (and that's what we report in GETQUOTA).

---
 fs/xfs/xfs_trans_dquot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/xfs/xfs_trans_dquot.c +1 -1
index c23257a26c2b8..b8f05d5909b59 100644
@@ -657,7 +657,7 @@ xfs_trans_dqresv(
 			}
 		}
 		if (ninos > 0) {
-			total_count = be64_to_cpu(dqp->q_core.d_icount) + ninos;
+			total_count = dqp->q_res_icount + ninos;
 			timer = be32_to_cpu(dqp->q_core.d_itimer);
 			warns = be16_to_cpu(dqp->q_core.d_iwarns);
 			warnlimit = dqp->q_mount->m_quotainfo->qi_iwarnlimit;
Signature · 1 line
2.25.1
author maintainer
#47 lore raw

PATCH 44/71 net: fec: correct the error path for regulator disable in probe

In reply to Greg Kroah-Hartman

From: Fugang Duan <[email protected]>

[ Upstream commit c6165cf0dbb82ded90163dce3ac183fc7a913dc4 ]

Correct the error path for regulator disable.

Fixes 9269e5560b26 ("net: fec: add phy-reset-gpios PROBE_DEFER check")
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/freescale/fec_main.c +2 -2
index 48c58f93b124b..3b6da228140e3 100644
@@ -3659,11 +3659,11 @@ fec_probe(struct platform_device *pdev)
 failed_irq:
 failed_init:
 	fec_ptp_stop(pdev);
-	if (fep->reg_phy)
-		regulator_disable(fep->reg_phy);
 failed_reset:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+	if (fep->reg_phy)
+		regulator_disable(fep->reg_phy);
 failed_regulator:
 	clk_disable_unprepare(fep->clk_ahb);
 failed_clk_ahb:
Signature · 1 line
2.25.1
author maintainer
#46 lore raw

PATCH 43/71 i40e: Fix crash during removing i40e driver

In reply to Greg Kroah-Hartman

From: Grzegorz Szczurek <[email protected]>

[ Upstream commit 5b6d4a7f20b09c47ca598760f6dafd554af8b6d5 ]

Fix the reason of crashing system by add waiting time to finish reset recovery process before starting remove driver procedure. Now VSI is releasing if VSI is not in reset recovery mode. Without this fix it was possible to start remove driver if other processing command need reset recovery procedure which resulted in null pointer dereference. VSI used by the ethtool process has been cleared by remove driver process.

[ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6731.508668] #PF: supervisor read access in kernel mode
[ 6731.508670] #PF: error_code(0x0000) - not-present page
[ 6731.508671] PGD 0 P4D 0
[ 6731.508674] Oops: 0000 [#1] SMP PTI
[ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017
[ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e]
[ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83
[ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246
[ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007
[ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780
[ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004
[ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000
[ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000
[ 6731.508708] FS:  00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000
[ 6731.508710] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0
[ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6731.508715] Call Trace:
[ 6731.508734]  i40e_vsi_close+0x84/0x90 [i40e]
[ 6731.508742]  i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e]
[ 6731.508749]  i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e]
[ 6731.508757]  i40e_prep_for_reset+0x59/0x130 [i40e]
[ 6731.508765]  i40e_reconfig_rss_queues+0x5a/0x120 [i40e]
[ 6731.508774]  i40e_set_channels+0xda/0x170 [i40e]
[ 6731.508778]  ethtool_set_channels+0xe9/0x150
[ 6731.508781]  dev_ethtool+0x1b94/0x2920
[ 6731.508805]  dev_ioctl+0xc2/0x590
[ 6731.508811]  sock_do_ioctl+0xae/0x150
[ 6731.508813]  sock_ioctl+0x34f/0x3c0
[ 6731.508821]  ksys_ioctl+0x98/0xb0
[ 6731.508828]  __x64_sys_ioctl+0x1a/0x20
[ 6731.508831]  do_syscall_64+0x57/0x1c0
[ 6731.508835]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes 4b8164467b85 ("i40e: Add common function for finding VSI by type")
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/ethernet/intel/i40e/i40e_main.c +3 -0
index a74b01bf581e9..3200c75b9ed2a 100644
@@ -14152,6 +14152,9 @@ static void i40e_remove(struct pci_dev *pdev)
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), 0);
 	i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), 0);
 
+	while (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state))
+		usleep_range(1000, 2000);
+
 	/* no more scheduling of any task */
 	set_bit(__I40E_SUSPENDED, pf->state);
 	set_bit(__I40E_DOWN, pf->state);
Signature · 1 line
2.25.1
author maintainer
#45 lore raw

PATCH 42/71 i40e: Set RX_ONLY mode for unicast promiscuous on VLAN

In reply to Greg Kroah-Hartman

From: Przemyslaw Patynowski <[email protected]>

[ Upstream commit 4bd5e02a2ed1575c2f65bd3c557a077dd399f0e8 ]

Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs.
Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN.

Fixes 6c41a7606967 ("i40e: Add promiscuous on VLAN support")
Fixes 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well")
---
 .../net/ethernet/intel/i40e/i40e_adminq_cmd.h |  2 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c | 35 ++++++++++++++-----
 2 files changed, 28 insertions(+), 9 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h +1 -1
index 80e3eec6134ee..a5e5e7e14e6c5 100644
@@ -1206,7 +1206,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes {
 #define I40E_AQC_SET_VSI_PROMISC_BROADCAST	0x04
 #define I40E_AQC_SET_VSI_DEFAULT		0x08
 #define I40E_AQC_SET_VSI_PROMISC_VLAN		0x10
-#define I40E_AQC_SET_VSI_PROMISC_TX		0x8000
+#define I40E_AQC_SET_VSI_PROMISC_RX_ONLY	0x8000
 	__le16	seid;
 #define I40E_AQC_VSI_PROM_CMD_SEID_MASK		0x3FF
 	__le16	vlan_tag;
drivers/net/ethernet/intel/i40e/i40e_common.c +27 -8
index eb0ae6ab01e26..e75b4c4872c09 100644
@@ -1970,6 +1970,21 @@ i40e_status i40e_aq_set_phy_debug(struct i40e_hw *hw, u8 cmd_flags,
 	return status;
 }
 
+/**
+ * i40e_is_aq_api_ver_ge
+ * @aq: pointer to AdminQ info containing HW API version to compare
+ * @maj: API major value
+ * @min: API minor value
+ *
+ * Assert whether current HW API version is greater/equal than provided.
+ **/
+static bool i40e_is_aq_api_ver_ge(struct i40e_adminq_info *aq, u16 maj,
+				  u16 min)
+{
+	return (aq->api_maj_ver > maj ||
+		(aq->api_maj_ver == maj && aq->api_min_ver >= min));
+}
+
 /**
  * i40e_aq_add_vsi
  * @hw: pointer to the hw struct
@@ -2095,18 +2110,16 @@ i40e_status i40e_aq_set_vsi_unicast_promiscuous(struct i40e_hw *hw,
 
 	if (set) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
-		if (rx_only_promisc &&
-		    (((hw->aq.api_maj_ver == 1) && (hw->aq.api_min_ver >= 5)) ||
-		     (hw->aq.api_maj_ver > 1)))
-			flags |= I40E_AQC_SET_VSI_PROMISC_TX;
+		if (rx_only_promisc && i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+			flags |= I40E_AQC_SET_VSI_PROMISC_RX_ONLY;
 	}
 
 	cmd->promiscuous_flags = cpu_to_le16(flags);
 
 	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
-	if (((hw->aq.api_maj_ver >= 1) && (hw->aq.api_min_ver >= 5)) ||
-	    (hw->aq.api_maj_ver > 1))
-		cmd->valid_flags |= cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_TX);
+	if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+		cmd->valid_flags |=
+			cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_RX_ONLY);
 
 	cmd->seid = cpu_to_le16(seid);
 	status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
@@ -2203,11 +2216,17 @@ enum i40e_status_code i40e_aq_set_vsi_uc_promisc_on_vlan(struct i40e_hw *hw,
 	i40e_fill_default_direct_cmd_desc(&desc,
 					  i40e_aqc_opc_set_vsi_promiscuous_modes);
 
-	if (enable)
+	if (enable) {
 		flags |= I40E_AQC_SET_VSI_PROMISC_UNICAST;
+		if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+			flags |= I40E_AQC_SET_VSI_PROMISC_RX_ONLY;
+	}
 
 	cmd->promiscuous_flags = cpu_to_le16(flags);
 	cmd->valid_flags = cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_UNICAST);
+	if (i40e_is_aq_api_ver_ge(&hw->aq, 1, 5))
+		cmd->valid_flags |=
+			cpu_to_le16(I40E_AQC_SET_VSI_PROMISC_RX_ONLY);
 	cmd->seid = cpu_to_le16(seid);
 	cmd->vlan_tag = cpu_to_le16(vid | I40E_AQC_SET_VSI_VLAN_VALID);
 
Signature · 1 line
2.25.1
author maintainer
#44 lore raw

PATCH 41/71 ASoC: q6routing: add dummy register read/write function

In reply to Greg Kroah-Hartman

From: Srinivas Kandagatla <[email protected]>

[ Upstream commit 796a58fe2b8c9b6668db00d92512ec84be663027 ]

Most of the DAPM widgets for DSP ASoC components reuse reg field of the widgets for its internal calculations, however these are not real registers. So read/writes to these numbers are not really valid. However ASoC core will read these registers to get default state during startup.

With recent changes to ASoC core, every register read/write failures are reported very verbosely. Prior to this fails to reads are totally ignored, so we never saw any error messages.

To fix this add dummy read/write function to return default value.

Fixes e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
---
 sound/soc/qcom/qdsp6/q6routing.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
sound/soc/qcom/qdsp6/q6routing.c +16 -0
index c6b51571be945..44eee18c658ae 100644
@@ -968,6 +968,20 @@ static int msm_routing_probe(struct snd_soc_component *c)
 	return 0;
 }
 
+static unsigned int q6routing_reg_read(struct snd_soc_component *component,
+				       unsigned int reg)
+{
+	/* default value */
+	return 0;
+}
+
+static int q6routing_reg_write(struct snd_soc_component *component,
+			       unsigned int reg, unsigned int val)
+{
+	/* dummy */
+	return 0;
+}
+
 static const struct snd_soc_component_driver msm_soc_routing_component = {
 	.ops = &q6pcm_routing_ops,
 	.probe = msm_routing_probe,
@@ -976,6 +990,8 @@ static const struct snd_soc_component_driver msm_soc_routing_component = {
 	.num_dapm_widgets = ARRAY_SIZE(msm_qdsp6_widgets),
 	.dapm_routes = intercon,
 	.num_dapm_routes = ARRAY_SIZE(intercon),
+	.read = q6routing_reg_read,
+	.write = q6routing_reg_write,
 };
 
 static int q6pcm_routing_probe(struct platform_device *pdev)
Signature · 1 line
2.25.1
author maintainer
#43 lore raw

PATCH 40/71 ext4: dont allow overlapping system zones

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

[ Upstream commit bf9a379d0980e7413d94cb18dac73db2bfc5f470 ]

Currently, add_system_zone() just silently merges two added system zones that overlap. However the overlap should not happen and it generally suggests that some unrelated metadata overlap which indicates the fs is corrupted. We should have caught such problems earlier (e.g. in ext4_check_descriptors()) but add this check as another line of defense. In later patch we also use this for stricter checking of journal inode extent tree.

---
 fs/ext4/block_validity.c | 36 +++++++++++++-----------------------
 1 file changed, 13 insertions(+), 23 deletions(-)
fs/ext4/block_validity.c +13 -23
index d203cc935ff83..552164034d340 100644
@@ -68,7 +68,7 @@ static int add_system_zone(struct ext4_system_blocks *system_blks,
 			   ext4_fsblk_t start_blk,
 			   unsigned int count)
 {
-	struct ext4_system_zone *new_entry = NULL, *entry;
+	struct ext4_system_zone *new_entry, *entry;
 	struct rb_node **n = &system_blks->root.rb_node, *node;
 	struct rb_node *parent = NULL, *new_node = NULL;
 
@@ -79,30 +79,20 @@ static int add_system_zone(struct ext4_system_blocks *system_blks,
 			n = &(*n)->rb_left;
 		else if (start_blk >= (entry->start_blk + entry->count))
 			n = &(*n)->rb_right;
-		else {
-			if (start_blk + count > (entry->start_blk +
-						 entry->count))
-				entry->count = (start_blk + count -
-						entry->start_blk);
-			new_node = *n;
-			new_entry = rb_entry(new_node, struct ext4_system_zone,
-					     node);
-			break;
-		}
+		else	/* Unexpected overlap of system zones. */
+			return -EFSCORRUPTED;
 	}
 
-	if (!new_entry) {
-		new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
-					     GFP_KERNEL);
-		if (!new_entry)
-			return -ENOMEM;
-		new_entry->start_blk = start_blk;
-		new_entry->count = count;
-		new_node = &new_entry->node;
-
-		rb_link_node(new_node, parent, n);
-		rb_insert_color(new_node, &system_blks->root);
-	}
+	new_entry = kmem_cache_alloc(ext4_system_zone_cachep,
+				     GFP_KERNEL);
+	if (!new_entry)
+		return -ENOMEM;
+	new_entry->start_blk = start_blk;
+	new_entry->count = count;
+	new_node = &new_entry->node;
+
+	rb_link_node(new_node, parent, n);
+	rb_insert_color(new_node, &system_blks->root);
 
 	/* Can we merge to the left? */
 	node = rb_prev(new_node);
Signature · 1 line
2.25.1
author maintainer
#42 lore raw

PATCH 39/71 ext4: fix potential negative array index in do_split()

In reply to Greg Kroah-Hartman

From: Eric Sandeen <[email protected]>

[ Upstream commit 5872331b3d91820e14716632ebb56b1399b34fe1 ]

If for any reason a directory passed to do_split() does not have enough active entries to exceed half the size of the block, we can end up iterating over all "count" entries without finding a split point.

In this case, count == move, and split will be zero, and we will attempt a negative index into map[].

Guard against this by detecting this case, and falling back to split-to-half-of-count instead; in this case we will still have plenty of space (> half blocksize) in each split block.

Fixes ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks")
---
 fs/ext4/namei.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
fs/ext4/namei.c +13 -3
index a2425e2d439cf..186a2dd05bd87 100644
@@ -1732,7 +1732,7 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
 			     blocksize, hinfo, map);
 	map -= count;
 	dx_sort_map(map, count);
-	/* Split the existing block in the middle, size-wise */
+	/* Ensure that neither split block is over half full */
 	size = 0;
 	move = 0;
 	for (i = count-1; i >= 0; i--) {
@@ -1742,8 +1742,18 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
 		size += map[i].size;
 		move++;
 	}
-	/* map index at which we will split */
-	split = count - move;
+	/*
+	 * map index at which we will split
+	 *
+	 * If the sum of active entries didn't exceed half the block size, just
+	 * split it in half by count; each resulting block will have at least
+	 * half the space free.
+	 */
+	if (i > 0)
+		split = count - move;
+	else
+		split = count/2;
+
 	hash2 = map[split].hash;
 	continued = hash2 == map[split - 1].hash;
 	dxtrace(printk(KERN_INFO "Split block %lu at %x, %i/%i\n",
Signature · 1 line
2.25.1
author maintainer
#41 lore raw

PATCH 38/71 fs/signalfd.c: fix inconsistent return codes for signalfd4

In reply to Greg Kroah-Hartman

From: Helge Deller <[email protected]>

[ Upstream commit a089e3fd5a82aea20f3d9ec4caa5f4c65cc2cfcc ]

The kernel signalfd4() syscall returns different error codes when called either in compat or native mode. This behaviour makes correct emulation in qemu and testing programs like LTP more complicated.

Fix the code to always return -in both modes- EFAULT for unaccessible user memory, and EINVAL when called with an invalid signal mask.

---
 fs/signalfd.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/signalfd.c +6 -4
index 4fcd1498acf52..3c40a3bf772ce 100644
@@ -313,9 +313,10 @@ SYSCALL_DEFINE4(signalfd4, int, ufd, sigset_t __user *, user_mask,
 {
 	sigset_t mask;
 
-	if (sizemask != sizeof(sigset_t) ||
-	    copy_from_user(&mask, user_mask, sizeof(mask)))
+	if (sizemask != sizeof(sigset_t))
 		return -EINVAL;
+	if (copy_from_user(&mask, user_mask, sizeof(mask)))
+		return -EFAULT;
 	return do_signalfd4(ufd, &mask, flags);
 }
 
@@ -324,9 +325,10 @@ SYSCALL_DEFINE3(signalfd, int, ufd, sigset_t __user *, user_mask,
 {
 	sigset_t mask;
 
-	if (sizemask != sizeof(sigset_t) ||
-	    copy_from_user(&mask, user_mask, sizeof(mask)))
+	if (sizemask != sizeof(sigset_t))
 		return -EINVAL;
+	if (copy_from_user(&mask, user_mask, sizeof(mask)))
+		return -EFAULT;
 	return do_signalfd4(ufd, &mask, 0);
 }
 
Signature · 1 line
2.25.1
author maintainer
#22 lore raw

PATCH 20/71 spi: Prevent adding devices below an unregistering controller

In reply to Greg Kroah-Hartman

From: Lukas Wunner <[email protected]>

[ Upstream commit ddf75be47ca748f8b12d28ac64d624354fddf189 ]

CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the same via sysfs.

But there are no precautions to prevent adding a device below a controller that's being removed. Such a device is unusable and may not even be able to unbind cleanly as it becomes inaccessible once the controller has been torn down. E.g. it is then impossible to quiesce the device's interrupt.

of_spi_notify() and acpi_spi_notify() do hold a ref on the controller, but otherwise run lockless against spi_unregister_controller().

Fix by holding the spi_add_lock in spi_unregister_controller() and bailing out of spi_add_device() if the controller has been unregistered concurrently.

Fixes ce79d54ae447 ("spi/of: Add OF notifier handler")
Cc [email protected] # v3.19+
Cc Geert Uytterhoeven <[email protected]>
Cc Octavian Purdila <[email protected]>
Cc Pantelis Antoniou <[email protected]>
---
 drivers/spi/Kconfig |  3 +++
 drivers/spi/spi.c   | 21 ++++++++++++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)
drivers/spi/Kconfig +3 -0
index 671d078349cc6..0a7fd56c1ed9d 100644
@@ -817,4 +817,7 @@ config SPI_SLAVE_SYSTEM_CONTROL
 
 endif # SPI_SLAVE
 
+config SPI_DYNAMIC
+	def_bool ACPI || OF_DYNAMIC || SPI_SLAVE
+
 endif # SPI
drivers/spi/spi.c +20 -1
index f589d8100e957..92e6b6774d98e 100644
@@ -432,6 +432,12 @@ static LIST_HEAD(spi_controller_list);
  */
 static DEFINE_MUTEX(board_lock);
 
+/*
+ * Prevents addition of devices with same chip select and
+ * addition of devices below an unregistering controller.
+ */
+static DEFINE_MUTEX(spi_add_lock);
+
 /**
  * spi_alloc_device - Allocate a new SPI device
  * @ctlr: Controller to which device is connected
@@ -510,7 +516,6 @@ static int spi_dev_check(struct device *dev, void *data)
  */
 int spi_add_device(struct spi_device *spi)
 {
-	static DEFINE_MUTEX(spi_add_lock);
 	struct spi_controller *ctlr = spi->controller;
 	struct device *dev = ctlr->dev.parent;
 	int status;
@@ -538,6 +543,13 @@ int spi_add_device(struct spi_device *spi)
 		goto done;
 	}
 
+	/* Controller may unregister concurrently */
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC) &&
+	    !device_is_registered(&ctlr->dev)) {
+		status = -ENODEV;
+		goto done;
+	}
+
 	if (ctlr->cs_gpios)
 		spi->cs_gpio = ctlr->cs_gpios[spi->chip_select];
 
@@ -2306,6 +2318,10 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	struct spi_controller *found;
 	int id = ctlr->bus_num;
 
+	/* Prevent addition of new devices, unregister existing ones */
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+		mutex_lock(&spi_add_lock);
+
 	device_for_each_child(&ctlr->dev, NULL, __unregister);
 
 	/* First make sure that this controller was ever added */
@@ -2326,6 +2342,9 @@ void spi_unregister_controller(struct spi_controller *ctlr)
 	if (found == ctlr)
 		idr_remove(&spi_master_idr, id);
 	mutex_unlock(&board_lock);
+
+	if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
+		mutex_unlock(&spi_add_lock);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_controller);
 
Signature · 1 line
2.25.1
author maintainer
#40 lore raw

PATCH 37/71 alpha: fix annotation of io{read,write}{16,32}be()

In reply to Greg Kroah-Hartman

From: Luc Van Oostenryck <[email protected]>

[ Upstream commit bd72866b8da499e60633ff28f8a4f6e09ca78efe ]

These accessors must be used to read/write a big-endian bus. The value returned or written is native-endian.

However, these accessors are defined using be{16,32}_to_cpu() or cpu_to_be{16,32}() to make the endian conversion but these expect a __be{16,32} when none is present. Keeping them would need a force cast that would solve nothing at all.

So, do the conversion using swab{16,32}, like done in asm-generic for similar situations.

---
 arch/alpha/include/asm/io.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/alpha/include/asm/io.h +4 -4
index eb09d5aee9106..0bba9e991189d 100644
@@ -507,10 +507,10 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 }
 #endif
 
-#define ioread16be(p) be16_to_cpu(ioread16(p))
-#define ioread32be(p) be32_to_cpu(ioread32(p))
-#define iowrite16be(v,p) iowrite16(cpu_to_be16(v), (p))
-#define iowrite32be(v,p) iowrite32(cpu_to_be32(v), (p))
+#define ioread16be(p) swab16(ioread16(p))
+#define ioread32be(p) swab32(ioread32(p))
+#define iowrite16be(v,p) iowrite16(swab16(v), (p))
+#define iowrite32be(v,p) iowrite32(swab32(v), (p))
 
 #define inb_p		inb
 #define inw_p		inw
Signature · 1 line
2.25.1
author maintainer
#39 lore raw

PATCH 36/71 xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init

In reply to Greg Kroah-Hartman

From: Eiichi Tsukata <[email protected]>

[ Upstream commit 96cf2a2c75567ff56195fe3126d497a2e7e4379f ]

If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN shows the following warning:

  UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23
  member access within null pointer of type 'struct xfs_kobj'
  Call Trace:
   dump_stack+0x10e/0x195
   ubsan_type_mismatch_common+0x241/0x280
   __ubsan_handle_type_mismatch_v1+0x32/0x40
   init_xfs_fs+0x12b/0x28f
   do_one_initcall+0xdd/0x1d0
   do_initcall_level+0x151/0x1b6
   do_initcalls+0x50/0x8f
   do_basic_setup+0x29/0x2b
   kernel_init_freeable+0x19f/0x20b
   kernel_init+0x11/0x1e0
   ret_from_fork+0x22/0x30

Fix it by checking parent_kobj before the code accesses its member.

---
 fs/xfs/xfs_sysfs.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
fs/xfs/xfs_sysfs.h +4 -2
index e9f810fc67317..43585850f1546 100644
@@ -32,9 +32,11 @@ xfs_sysfs_init(
 	struct xfs_kobj		*parent_kobj,
 	const char		*name)
 {
+	struct kobject		*parent;
+
+	parent = parent_kobj ? &parent_kobj->kobject : NULL;
 	init_completion(&kobj->complete);
-	return kobject_init_and_add(&kobj->kobject, ktype,
-				    &parent_kobj->kobject, "%s", name);
+	return kobject_init_and_add(&kobj->kobject, ktype, parent, "%s", name);
 }
 
 static inline void
Signature · 1 line
2.25.1
author maintainer
#38 lore raw

PATCH 35/71 tools/testing/selftests/cgroup/cgroup_util.c: cg_read_strcmp: fix null pointer dereference

In reply to Greg Kroah-Hartman

From: Gaurav Singh <[email protected]>

[ Upstream commit d830020656c5b68ced962ed3cb51a90e0a89d4c4 ]

Haven't reproduced this issue. This PR is does a minor code cleanup.

---
 tools/testing/selftests/cgroup/cgroup_util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/cgroup/cgroup_util.c +1 -1
index 075cb0c730149..90418d79ef676 100644
@@ -95,7 +95,7 @@ int cg_read_strcmp(const char *cgroup, const char *control,
 
 	/* Handle the case of comparing against empty string */
 	if (!expected)
-		size = 32;
+		return -1;
 	else
 		size = strlen(expected) + 1;
 
Signature · 1 line
2.25.1
author maintainer
#36 lore raw

PATCH 33/71 scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

In reply to Greg Kroah-Hartman

From: Javed Hasan <[email protected]>

[ Upstream commit ec007ef40abb6a164d148b0dc19789a7a2de2cc8 ]

In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except for PTR_ERR. However, in some cases it didn't.

This fix is to call fc_frame_free(fp) before function returns.

---
 drivers/scsi/libfc/fc_disc.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/scsi/libfc/fc_disc.c +9 -3
index 8839f509b19ab..78cf5b32bca67 100644
@@ -593,8 +593,12 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 
 	if (PTR_ERR(fp) == -FC_EX_CLOSED)
 		goto out;
-	if (IS_ERR(fp))
-		goto redisc;
+	if (IS_ERR(fp)) {
+		mutex_lock(&disc->disc_mutex);
+		fc_disc_restart(disc);
+		mutex_unlock(&disc->disc_mutex);
+		goto out;
+	}
 
 	cp = fc_frame_payload_get(fp, sizeof(*cp));
 	if (!cp)
@@ -621,7 +625,7 @@ static void fc_disc_gpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
 				new_rdata->disc_id = disc->disc_id;
 				fc_rport_login(new_rdata);
 			}
-			goto out;
+			goto free_fp;
 		}
 		rdata->disc_id = disc->disc_id;
 		mutex_unlock(&rdata->rp_mutex);
@@ -638,6 +642,8 @@ redisc:
 		fc_disc_restart(disc);
 		mutex_unlock(&disc->disc_mutex);
 	}
+free_fp:
+	fc_frame_free(fp);
 out:
 	kref_put(&rdata->kref, fc_rport_destroy);
 	if (!IS_ERR(fp))
Signature · 1 line
2.25.1
author maintainer
#35 lore raw

PATCH 32/71 cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0

In reply to Greg Kroah-Hartman

From: Srinivas Pandruvada <[email protected]>

[ Upstream commit 4daca379c703ff55edc065e8e5173dcfeecf0148 ]

The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update this MSR via BIOS settings on some systems or can use msr tools to update. Also some systems boot with value = 0.

This results in display of cpufreq/cpuinfo_max_freq wrong. This value will be equal to cpufreq/base_frequency, even though turbo is enabled.

But platform will still function normally in HWP mode as we get max 1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used to calculate cpu->pstate.turbo_freq, which is used for to set policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate is used. For example to set policy->max.

To fix this, also update cpu->pstate.turbo_pstate when updating cpu->pstate.turbo_freq.

---
 drivers/cpufreq/intel_pstate.c | 1 +
 1 file changed, 1 insertion(+)
drivers/cpufreq/intel_pstate.c +1 -0
index e7b3d4ed8eff4..99166000ffb77 100644
@@ -1431,6 +1431,7 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 
 		intel_pstate_get_hwp_max(cpu->cpu, &phy_max, &current_max);
 		cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling;
+		cpu->pstate.turbo_pstate = phy_max;
 	} else {
 		cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling;
 	}
Signature · 1 line
2.25.1
author maintainer
#34 lore raw

PATCH 31/71 ceph: fix use-after-free for fsc->mdsc

In reply to Greg Kroah-Hartman

From: Xiubo Li <[email protected]>

[ Upstream commit a7caa88f8b72c136f9a401f498471b8a8e35370d ]

If the ceph_mdsc_init() fails, it will free the mdsc already.

---
 fs/ceph/mds_client.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ceph/mds_client.c +2 -1
index a2e903203bf9f..0fa14d8b9c64c 100644
@@ -3682,7 +3682,6 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 		return -ENOMEM;
 	}
 
-	fsc->mdsc = mdsc;
 	init_completion(&mdsc->safe_umount_waiters);
 	init_waitqueue_head(&mdsc->session_close_wq);
 	INIT_LIST_HEAD(&mdsc->waiting_for_map);
@@ -3723,6 +3722,8 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 
 	strscpy(mdsc->nodename, utsname()->nodename,
 		sizeof(mdsc->nodename));
+
+	fsc->mdsc = mdsc;
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#33 lore raw

PATCH 30/71 jffs2: fix UAF problem

In reply to Greg Kroah-Hartman

From: Zhe Li <[email protected]>

[ Upstream commit 798b7347e4f29553db4b996393caf12f5b233daf ]

The log of UAF problem is listed below.

BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc
Read of size 4 by task rm/8283
=============================================================================

BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0

        0xb0bba6ef
        jffs2_write_dirent+0x11c/0x9c8 [jffs2]
        __slab_alloc.isra.21.constprop.25+0x2c/0x44
        __kmalloc+0x1dc/0x370
        jffs2_write_dirent+0x11c/0x9c8 [jffs2]
        jffs2_do_unlink+0x328/0x5fc [jffs2]
        jffs2_rmdir+0x110/0x1cc [jffs2]
        vfs_rmdir+0x180/0x268
        do_rmdir+0x2cc/0x300
        ret_from_syscall+0x0/0x3c
INFO: Freed in 0x205b age=3054364 cpu=0 pid=0
        0x2e9173
        jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
        jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
        jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2]
        jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2]
        jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2]
        jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2]
        kthread+0x1a8/0x1b0
        ret_from_kernel_thread+0x5c/0x64
Call Trace:
[c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable)
[c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2]
[c17dddd0] [c026da04] vfs_rmdir+0x180/0x268
[c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300
[c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c

The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem.

---
 fs/jffs2/dir.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/jffs2/dir.c +5 -1
index f20cff1194bb6..776493713153f 100644
@@ -590,10 +590,14 @@ static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry)
 	int ret;
 	uint32_t now = JFFS2_NOW();
 
+	mutex_lock(&f->sem);
 	for (fd = f->dents ; fd; fd = fd->next) {
-		if (fd->ino)
+		if (fd->ino) {
+			mutex_unlock(&f->sem);
 			return -ENOTEMPTY;
+		}
 	}
+	mutex_unlock(&f->sem);
 
 	ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
 			      dentry->d_name.len, f, now);
Signature · 1 line
2.25.1
author maintainer
#21 lore raw

PATCH 19/71 kthread: Do not preempt current task if it is going to call schedule()

In reply to Greg Kroah-Hartman

From: Liang Chen <[email protected]>

commit 26c7295be0c5e6da3fa45970e9748be983175b1b upstream.

when we create a kthread with ktrhead_create_on_cpu(),the child thread entry is ktread.c:ktrhead() which will be preempted by the parent after call complete(done) while schedule() is not called yet,then the parent will call wait_task_inactive(child) but the child is still on the runqueue, so the parent will schedule_hrtimeout() for 1 jiffy,it will waste a lot of time,especially on startup.

parent child
ktrhead_create_on_cpu()
wait_fo_completion(&done) -----> ktread.c:ktrhead()
|----- complete(done);--wakeup and preempted by parent

 kthread_bind() <------------|  |-> schedule();--dequeue here
  wait_task_inactive(child)     |
   schedule_hrtimeout(1 jiffy) -|

So we hope the child just wakeup parent but not preempted by parent, and the child is going to call schedule() soon,then the parent will not call schedule_hrtimeout(1 jiffy) as the child is already dequeue.

The same issue for ktrhead_park()&&kthread_parkme(). This patch can save 120ms on rk312x startup with CONFIG_HZ=300.

---
 kernel/kthread.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
kernel/kthread.c +15 -2
@@ -190,8 +190,15 @@ static void __kthread_parkme(struct kthr
 		if (!test_bit(KTHREAD_SHOULD_PARK, &self->flags))
 			break;
 
+		/*
+		 * Thread is going to call schedule(), do not preempt it,
+		 * or the caller of kthread_park() may spend more time in
+		 * wait_task_inactive().
+		 */
+		preempt_disable();
 		complete(&self->parked);
-		schedule();
+		schedule_preempt_disabled();
+		preempt_enable();
 	}
 	__set_current_state(TASK_RUNNING);
 }
@@ -236,8 +243,14 @@ static int kthread(void *_create)
 	/* OK, tell user we're spawned, wait for stop or wakeup */
 	__set_current_state(TASK_UNINTERRUPTIBLE);
 	create->result = current;
+	/*
+	 * Thread is going to call schedule(), do not preempt it,
+	 * or the creator may spend more time in wait_task_inactive().
+	 */
+	preempt_disable();
 	complete(done);
-	schedule();
+	schedule_preempt_disabled();
+	preempt_enable();
 
 	ret = -EINTR;
 	if (!test_bit(KTHREAD_SHOULD_STOP, &self->flags)) {

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.19.142-rc1 review

This is the start of the stable review cycle for the 4.19.142 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 26 Aug 2020 08:23:34 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.142-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.142-rc1

Stephen Boyd <[email protected]>
clk: Evict unregistered clks from parent caches

Juergen Gross <[email protected]>
xen: don't reschedule in preemption off sections

Peter Xu <[email protected]>
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

Al Viro <[email protected]>
do_epoll_ctl(): clean the failure exits up a bit

Marc Zyngier <[email protected]>
epoll: Keep a reference on files added to the check list

Li Heng <[email protected]>
efi: add missed destroy_workqueue when efisubsys_init fails

Vasant Hegde <[email protected]>
powerpc/pseries: Do not initiate shutdown when system is running on UPS

Tom Rix <[email protected]>
net: dsa: b53: check for timeout

Haiyang Zhang <[email protected]>
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

Wang Hai <[email protected]>
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()

Shay Agroskin <[email protected]>
net: ena: Prevent reset after device destruction

Jiri Wiesner <[email protected]>
bonding: fix active-backup failover for current ARP slave

David Howells <[email protected]>
afs: Fix NULL deref in afs_dynroot_depopulate()

Selvin Xavier <[email protected]>
RDMA/bnxt_re: Do not add user qps to flushlist

Randy Dunlap <[email protected]>
Fix build error when CONFIG_ACPI is not set/enabled:

Juergen Gross <[email protected]>
efi: avoid error message when booting under Xen

Masahiro Yamada <[email protected]>
kconfig: qconf: fix signal connection to invalid slots

Masahiro Yamada <[email protected]>
kconfig: qconf: do not limit the pop-up menu to the first row

Jim Mattson <[email protected]>
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode

Jim Mattson <[email protected]>
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode

Alex Williamson <[email protected]>
vfio/type1: Add proper error unwind for vfio_iommu_replay()

Dinghao Liu <[email protected]>
ASoC: intel: Fix memleak in sst_media_open

Srinivas Kandagatla <[email protected]>
ASoC: msm8916-wcd-analog: fix register Interrupt offset

Heiko Carstens <[email protected]>
s390/ptrace: fix storage key handling

Heiko Carstens <[email protected]>
s390/runtime_instrumentation: fix storage key handling

Cong Wang <[email protected]>
bonding: fix a potential double-unregister

Jarod Wilson <[email protected]>
bonding: show saner speed for broadcast mode

Fugang Duan <[email protected]>
net: fec: correct the error path for regulator disable in probe

Grzegorz Szczurek <[email protected]>
i40e: Fix crash during removing i40e driver

Przemyslaw Patynowski <[email protected]>
i40e: Set RX_ONLY mode for unicast promiscuous on VLAN

Srinivas Kandagatla <[email protected]>
ASoC: q6routing: add dummy register read/write function

Jan Kara <[email protected]>
ext4: don't allow overlapping system zones

Eric Sandeen <[email protected]>
ext4: fix potential negative array index in do_split()

Helge Deller <[email protected]>
fs/signalfd.c: fix inconsistent return codes for signalfd4

Luc Van Oostenryck <[email protected]>

    alpha: fix annotation of io{read,write}{16,32}be()

Eiichi Tsukata <[email protected]>
xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init

Gaurav Singh <[email protected]>
tools/testing/selftests/cgroup/cgroup_util.c: cg_read_strcmp: fix null pointer dereference

Mao Wenan <[email protected]>
virtio_ring: Avoid loop when vq is broken in virtqueue_poll

Javed Hasan <[email protected]>
scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

Srinivas Pandruvada <[email protected]>
cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0

Xiubo Li <[email protected]>

    ceph: fix use-after-free for fsc->mdsc

Zhe Li <[email protected]>
jffs2: fix UAF problem

Darrick J. Wong <[email protected]>
xfs: fix inode quota reservation checks

Chuck Lever <[email protected]>
svcrdma: Fix another Receive buffer leak

Greg Ungerer <[email protected]>
m68knommu: fix overwriting of bits in ColdFire V3 cache control

Xiongfeng Wang <[email protected]>
Input: psmouse - add a newline when printing 'proto' by sysfs

Evgeny Novikov <[email protected]>
media: vpss: clean up resources in init

Huacai Chen <[email protected]>
rtc: goldfish: Enable interrupt in set_alarm() when necessary

Chuhong Yuan <[email protected]>
media: budget-core: Improve exception handling in budget_register()

Bodo Stroesser <[email protected]>
scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM

Stanley Chu <[email protected]>
scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices

Lukas Wunner <[email protected]>
spi: Prevent adding devices below an unregistering controller

Liang Chen <[email protected]>
kthread: Do not preempt current task if it is going to call schedule()

Krunoslav Kovac <[email protected]>
drm/amd/display: fix pow() crashing when given base 0

Yang Shi <[email protected]>
mm/memory.c: skip spurious TLB flush for retried page fault

Steffen Maier <[email protected]>
scsi: zfcp: Fix use-after-free in request timeout handlers

zhangyi (F) <[email protected]>
jbd2: add the missing unlock_buffer() in the error path of jbd2_write_superblock()

Jan Kara <[email protected]>
ext4: fix checking of directory entry validity for inline directories

Charan Teja Reddy <[email protected]>
mm, page_alloc: fix core hung in free_pcppages_bulk()

Doug Berger <[email protected]>
mm: include CMA pages in lowmem_reserve at boot

Wei Yongjun <[email protected]>
kernel/relay.c: fix memleak on destroy relay channel

Jann Horn <[email protected]>
romfs: fix uninitialized memory leak in romfs_dev_read()

Josef Bacik <[email protected]>
btrfs: sysfs: use NOFS for device creation

Qu Wenruo <[email protected]>
btrfs: inode: fix NULL pointer dereference if inode doesn't need compression

Nikolay Borisov <[email protected]>
btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range

Josef Bacik <[email protected]>
btrfs: don't show full path of bind mounts in subvol=

Marcos Paulo de Souza <[email protected]>
btrfs: export helpers for subvolume name/id resolution

Hugh Dickins <[email protected]>
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

Hugh Dickins <[email protected]>
khugepaged: khugepaged_test_exit() check mmget_still_valid()

Masami Hiramatsu <[email protected]>
perf probe: Fix memory leakage when the probe point is not found

Chris Wilson <[email protected]>
drm/vgem: Replace opencoded version of drm_gem_dumb_map_offset()

-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/alpha/include/asm/io.h                       |  8 +--
 arch/m68k/include/asm/m53xxacr.h                  |  6 +-
 arch/powerpc/platforms/pseries/ras.c              |  1 -
 arch/s390/kernel/ptrace.c                         |  7 ++-
 arch/s390/kernel/runtime_instr.c                  |  2 +-
 arch/x86/kvm/x86.c                                |  2 +-
 arch/x86/pci/xen.c                                |  1 +
 drivers/clk/clk.c                                 | 52 +++++++++++++----
 drivers/cpufreq/intel_pstate.c                    |  1 +
 drivers/firmware/efi/efi.c                        |  2 +
 drivers/gpu/drm/amd/display/include/fixed31_32.h  |  3 +
 drivers/gpu/drm/vgem/vgem_drv.c                   | 27 ---------
 drivers/infiniband/hw/bnxt_re/main.c              |  3 +-
 drivers/input/mouse/psmouse-base.c                |  2 +-
 drivers/media/pci/ttpci/budget-core.c             | 11 +++-
 drivers/media/platform/davinci/vpss.c             | 20 +++++--
 drivers/net/bonding/bond_main.c                   | 42 ++++++++++++--
 drivers/net/dsa/b53/b53_common.c                  |  2 +
 drivers/net/ethernet/amazon/ena/ena_netdev.c      | 19 +++---
 drivers/net/ethernet/cortina/gemini.c             |  4 +-
 drivers/net/ethernet/freescale/fec_main.c         |  4 +-
 drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h |  2 +-
 drivers/net/ethernet/intel/i40e/i40e_common.c     | 35 ++++++++---
 drivers/net/ethernet/intel/i40e/i40e_main.c       |  3 +
 drivers/net/hyperv/netvsc_drv.c                   |  2 +-
 drivers/rtc/rtc-goldfish.c                        |  1 +
 drivers/s390/scsi/zfcp_fsf.c                      |  4 +-
 drivers/scsi/libfc/fc_disc.c                      | 12 +++-
 drivers/scsi/ufs/ufs_quirks.h                     |  1 +
 drivers/scsi/ufs/ufshcd.c                         |  2 +
 drivers/spi/Kconfig                               |  3 +
 drivers/spi/spi.c                                 | 21 ++++++-
 drivers/target/target_core_user.c                 |  2 +-
 drivers/vfio/vfio_iommu_type1.c                   | 71 +++++++++++++++++++++--
 drivers/video/fbdev/efifb.c                       |  2 +-
 drivers/virtio/virtio_ring.c                      |  3 +
 drivers/xen/preempt.c                             |  2 +-
 fs/afs/dynroot.c                                  | 20 ++++---
 fs/btrfs/ctree.h                                  |  2 +
 fs/btrfs/export.c                                 |  8 +--
 fs/btrfs/export.h                                 |  5 ++
 fs/btrfs/inode.c                                  | 23 +++++---
 fs/btrfs/super.c                                  | 18 ++++--
 fs/btrfs/sysfs.c                                  |  4 ++
 fs/ceph/mds_client.c                              |  3 +-
 fs/eventpoll.c                                    | 19 +++---
 fs/ext4/block_validity.c                          | 36 +++++-------
 fs/ext4/namei.c                                   | 22 +++++--
 fs/jbd2/journal.c                                 |  4 +-
 fs/jffs2/dir.c                                    |  6 +-
 fs/romfs/storage.c                                |  4 +-
 fs/signalfd.c                                     | 10 ++--
 fs/xfs/xfs_sysfs.h                                |  6 +-
 fs/xfs/xfs_trans_dquot.c                          |  2 +-
 kernel/kthread.c                                  | 17 +++++-
 kernel/relay.c                                    |  1 +
 mm/hugetlb.c                                      | 24 ++++----
 mm/khugepaged.c                                   |  7 +--
 mm/memory.c                                       |  3 +
 mm/page_alloc.c                                   |  7 ++-
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c           |  2 +
 scripts/kconfig/qconf.cc                          | 70 +++++++++++-----------
 sound/soc/codecs/msm8916-wcd-analog.c             |  4 +-
 sound/soc/intel/atom/sst-mfld-platform-pcm.c      |  5 +-
 sound/soc/qcom/qdsp6/q6routing.c                  | 16 +++++
 tools/perf/util/probe-finder.c                    |  2 +-
 tools/testing/selftests/cgroup/cgroup_util.c      |  2 +-
 68 files changed, 496 insertions(+), 245 deletions(-)
author maintainer
#9 lore raw

PATCH 9/71 btrfs: sysfs: use NOFS for device creation

From: Josef Bacik <[email protected]>

Dave hit this splat during testing btrfs/078:

======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc6-default+ #1191 Not tainted
------------------------------------------------------
kswapd0/75 is trying to acquire lock:
ffffa040e9d04ff8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]

but task is already holding lock:
ffffffff8b0c8040 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (fs_reclaim){+.+.}-{0:0}:

	 __lock_acquire+0x56f/0xaa0
	 lock_acquire+0xa3/0x440
	 fs_reclaim_acquire.part.0+0x25/0x30
	 __kmalloc_track_caller+0x49/0x330
	 kstrdup+0x2e/0x60
	 __kernfs_new_node.constprop.0+0x44/0x250
	 kernfs_new_node+0x25/0x50
	 kernfs_create_link+0x34/0xa0
	 sysfs_do_create_link_sd+0x5e/0xd0
	 btrfs_sysfs_add_devices_dir+0x65/0x100 [btrfs]
	 btrfs_init_new_device+0x44c/0x12b0 [btrfs]
	 btrfs_ioctl+0xc3c/0x25c0 [btrfs]
	 ksys_ioctl+0x68/0xa0
	 __x64_sys_ioctl+0x16/0x20
	 do_syscall_64+0x50/0xe0
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:

	 __lock_acquire+0x56f/0xaa0
	 lock_acquire+0xa3/0x440
	 __mutex_lock+0xa0/0xaf0
	 btrfs_chunk_alloc+0x137/0x3e0 [btrfs]
	 find_free_extent+0xb44/0xfb0 [btrfs]
	 btrfs_reserve_extent+0x9b/0x180 [btrfs]
	 btrfs_alloc_tree_block+0xc1/0x350 [btrfs]
	 alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
	 __btrfs_cow_block+0x143/0x7a0 [btrfs]
	 btrfs_cow_block+0x15f/0x310 [btrfs]
	 push_leaf_right+0x150/0x240 [btrfs]
	 split_leaf+0x3cd/0x6d0 [btrfs]
	 btrfs_search_slot+0xd14/0xf70 [btrfs]
	 btrfs_insert_empty_items+0x64/0xc0 [btrfs]
	 __btrfs_commit_inode_delayed_items+0xb2/0x840 [btrfs]
	 btrfs_async_run_delayed_root+0x10e/0x1d0 [btrfs]
	 btrfs_work_helper+0x2f9/0x650 [btrfs]
	 process_one_work+0x22c/0x600
	 worker_thread+0x50/0x3b0
	 kthread+0x137/0x150
	 ret_from_fork+0x1f/0x30

-> #0 (&delayed_node->mutex){+.+.}-{3:3}:

	 check_prev_add+0x98/0xa20
	 validate_chain+0xa8c/0x2a00
	 __lock_acquire+0x56f/0xaa0
	 lock_acquire+0xa3/0x440
	 __mutex_lock+0xa0/0xaf0
	 __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
	 btrfs_evict_inode+0x3bf/0x560 [btrfs]
	 evict+0xd6/0x1c0
	 dispose_list+0x48/0x70
	 prune_icache_sb+0x54/0x80
	 super_cache_scan+0x121/0x1a0
	 do_shrink_slab+0x175/0x420
	 shrink_slab+0xb1/0x2e0
	 shrink_node+0x192/0x600
	 balance_pgdat+0x31f/0x750
	 kswapd+0x206/0x510
	 kthread+0x137/0x150
	 ret_from_fork+0x1f/0x30

other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim

   Possible unsafe locking scenario:
	 CPU0                    CPU1
	 ----                    ----
    lock(fs_reclaim);
				 lock(&fs_info->chunk_mutex);
				 lock(fs_reclaim);
    lock(&delayed_node->mutex);

*** DEADLOCK ***

3 locks held by kswapd0/75:
#0: ffffffff8b0c8040 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8b0b50b8 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x54/0x2e0 #2: ffffa040e057c0e8 (&type->s_umount_key#26){++++}-{3:3}, at: trylock_super+0x16/0x50

  stack backtrace:
  CPU: 2 PID: 75 Comm: kswapd0 Not tainted 5.8.0-rc6-default+ #1191
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   dump_stack+0x78/0xa0
   check_noncircular+0x16f/0x190
   check_prev_add+0x98/0xa20
   validate_chain+0xa8c/0x2a00
   __lock_acquire+0x56f/0xaa0
   lock_acquire+0xa3/0x440
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   __mutex_lock+0xa0/0xaf0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   ? __lock_acquire+0x56f/0xaa0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   ? lock_acquire+0xa3/0x440
   ? btrfs_evict_inode+0x138/0x560 [btrfs]
   ? btrfs_evict_inode+0x2fe/0x560 [btrfs]
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   btrfs_evict_inode+0x3bf/0x560 [btrfs]
   evict+0xd6/0x1c0
   dispose_list+0x48/0x70
   prune_icache_sb+0x54/0x80
   super_cache_scan+0x121/0x1a0
   do_shrink_slab+0x175/0x420
   shrink_slab+0xb1/0x2e0
   shrink_node+0x192/0x600
   balance_pgdat+0x31f/0x750
   kswapd+0x206/0x510
   ? _raw_spin_unlock_irqrestore+0x3e/0x50
   ? finish_wait+0x90/0x90
   ? balance_pgdat+0x750/0x750
   kthread+0x137/0x150
   ? kthread_stop+0x2a0/0x2a0
   ret_from_fork+0x1f/0x30

This is because we're holding the chunk_mutex while adding this device and adding its sysfs entries. We actually hold different locks in different places when calling this function, the dev_replace semaphore for instance in dev replace, so instead of moving this call around simply wrap it's operations in NOFS.

---
 fs/btrfs/sysfs.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/btrfs/sysfs.c +4 -0
index aefb0169d46d7..afec808a763b1 100644
@@ -10,6 +10,7 @@
 #include <linux/kobject.h>
 #include <linux/bug.h>
 #include <linux/debugfs.h>
+#include <linux/sched/mm.h>
 
 #include "ctree.h"
 #include "disk-io.h"
@@ -766,7 +767,9 @@ int btrfs_sysfs_add_device_link(struct btrfs_fs_devices *fs_devices,
 {
 	int error = 0;
 	struct btrfs_device *dev;
+	unsigned int nofs_flag;
 
+	nofs_flag = memalloc_nofs_save();
 	list_for_each_entry(dev, &fs_devices->devices, dev_list) {
 		struct hd_struct *disk;
 		struct kobject *disk_kobj;
@@ -785,6 +788,7 @@ int btrfs_sysfs_add_device_link(struct btrfs_fs_devices *fs_devices,
 		if (error)
 			break;
 	}
+	memalloc_nofs_restore(nofs_flag);
 
 	return error;
 }
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 8/71 btrfs: inode: fix NULL pointer dereference if inode doesnt need compression

In reply to Greg Kroah-Hartman

From: Qu Wenruo <[email protected]>

[ Upstream commit 1e6e238c3002ea3611465ce5f32777ddd6a40126 ]

[BUG]
There is a bug report of NULL pointer dereference caused in compress_file_extent():

  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
  NIP [c008000006dd4d34] compress_file_range.constprop.41+0x75c/0x8a0 [btrfs]
  LR [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs]
  Call Trace:
  [c000000c69093b00] [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs] (unreliable)
  [c000000c69093bd0] [c008000006dd4ebc] async_cow_start+0x44/0xa0 [btrfs]
  [c000000c69093c10] [c008000006e14824] normal_work_helper+0xdc/0x598 [btrfs]
  [c000000c69093c80] [c0000000001608c0] process_one_work+0x2c0/0x5b0
  [c000000c69093d10] [c000000000160c38] worker_thread+0x88/0x660
  [c000000c69093db0] [c00000000016b55c] kthread+0x1ac/0x1c0
  [c000000c69093e20] [c00000000000b660] ret_from_kernel_thread+0x5c/0x7c
  ---[ end trace f16954aa20d822f6 ]---

[CAUSE]
For the following execution route of compress_file_range(), it's possible to hit NULL pointer dereference:

compress_file_extent()

 |- pages = NULL;
 |- start = async_chunk->start = 0;
 |- end = async_chunk = 4095;
 |- nr_pages = 1;
 |- inode_need_compress() == false; <<< Possible, see later explanation
 |  Now, we have nr_pages = 1, pages = NULL
 |- cont:
 |- 		ret = cow_file_range_inline();
 |- 		if (ret <= 0) {
 |-		for (i = 0; i < nr_pages; i++) {
 |-			WARN_ON(pages[i]->mapping);	<<< Crash

To enter above call execution branch, we need the following race:

Thread 1 (chattr) | Thread 2 (writeback)
--------------------------+------------------------------

                          | btrfs_run_delalloc_range
                          | |- inode_need_compress = true
                          | |- cow_file_range_async()
btrfs_ioctl_set_flag()    |
|- binode_flags |=        |
   BTRFS_INODE_NOCOMPRESS |
                          | compress_file_range()
                          | |- inode_need_compress = false
                          | |- nr_page = 1 while pages = NULL
                          | |  Then hit the crash

[FIX]
This patch will fix it by checking @pages before doing accessing it. This patch is only designed as a hot fix and easy to backport.

More elegant fix may make btrfs only check inode_need_compress() once to avoid such race, but that would be another story.

Fixes 4d3a800ebb12 ("btrfs: merge nr_pages input and output parameter in compress_pages")
CC [email protected] # 4.14.x: cecc8d9038d16: btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range
---
 fs/btrfs/inode.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
fs/btrfs/inode.c +11 -4
index 8507192cd6449..bdfe159a60da6 100644
@@ -629,11 +629,18 @@ cont:
 						     page_error_op |
 						     PAGE_END_WRITEBACK);
 
-			for (i = 0; i < nr_pages; i++) {
-				WARN_ON(pages[i]->mapping);
-				put_page(pages[i]);
+			/*
+			 * Ensure we only free the compressed pages if we have
+			 * them allocated, as we can still reach here with
+			 * inode_need_compress() == false.
+			 */
+			if (pages) {
+				for (i = 0; i < nr_pages; i++) {
+					WARN_ON(pages[i]->mapping);
+					put_page(pages[i]);
+				}
+				kfree(pages);
 			}
-			kfree(pages);
 
 			return;
 		}
Signature · 1 line
2.25.1
author maintainer
#6 lore raw

PATCH 6/71 btrfs: dont show full path of bind mounts in subvol=

In reply to Greg Kroah-Hartman

From: Josef Bacik <[email protected]>

[ Upstream commit 3ef3959b29c4a5bd65526ab310a1a18ae533172a ]

Chris Murphy reported a problem where rpm ostree will bind mount a bunch of things for whatever voodoo it's doing. But when it does this /proc/mounts shows something like

/dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0

Despite subvolid=256 being subvol=/foo. This is because we're just spitting out the dentry of the mount point, which in the case of bind mounts is the source path for the mountpoint. Instead we should spit out the path to the actual subvol. Fix this by looking up the name for the subvolid we have mounted. With this fix the same test looks like this

/dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0 /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0

---
 fs/btrfs/super.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
fs/btrfs/super.c +8 -2
index 3e6e21a7c5e6f..4d2810a32b4a9 100644
@@ -1282,6 +1282,7 @@ static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry)
 {
 	struct btrfs_fs_info *info = btrfs_sb(dentry->d_sb);
 	const char *compress_type;
+	const char *subvol_name;
 
 	if (btrfs_test_opt(info, DEGRADED))
 		seq_puts(seq, ",degraded");
@@ -1366,8 +1367,13 @@ static int btrfs_show_options(struct seq_file *seq, struct dentry *dentry)
 		seq_puts(seq, ",ref_verify");
 	seq_printf(seq, ",subvolid=%llu",
 		  BTRFS_I(d_inode(dentry))->root->root_key.objectid);
-	seq_puts(seq, ",subvol=");
-	seq_dentry(seq, dentry, " \t\n\\");
+	subvol_name = btrfs_get_subvol_name_from_objectid(info,
+			BTRFS_I(d_inode(dentry))->root->root_key.objectid);
+	if (!IS_ERR(subvol_name)) {
+		seq_puts(seq, ",subvol=");
+		seq_escape(seq, subvol_name, " \t\n\\");
+		kfree(subvol_name);
+	}
 	return 0;
 }
 
Signature · 1 line
2.25.1
author maintainer
#5 lore raw

PATCH 5/71 btrfs: export helpers for subvolume name/id resolution

In reply to Greg Kroah-Hartman

From: Marcos Paulo de Souza <[email protected]>

[ Upstream commit c0c907a47dccf2cf26251a8fb4a8e7a3bf79ce84 ]

The functions will be used outside of export.c and super.c to allow resolving subvolume name from a given id, eg. for subvolume deletion by id ioctl.

---
 fs/btrfs/ctree.h  | 2 ++
 fs/btrfs/export.c | 8 ++++----
 fs/btrfs/export.h | 5 +++++
 fs/btrfs/super.c  | 8 ++++----
 4 files changed, 15 insertions(+), 8 deletions(-)
fs/btrfs/ctree.h +2 -0
index 15cb96ad15d8c..554727d82d432 100644
@@ -3271,6 +3271,8 @@ void btrfs_sysfs_remove_mounted(struct btrfs_fs_info *fs_info);
 int btrfs_parse_options(struct btrfs_fs_info *info, char *options,
 			unsigned long new_flags);
 int btrfs_sync_fs(struct super_block *sb, int wait);
+char *btrfs_get_subvol_name_from_objectid(struct btrfs_fs_info *fs_info,
+					  u64 subvol_objectid);
 
 static inline __printf(2, 3) __cold
 void btrfs_no_printk(const struct btrfs_fs_info *fs_info, const char *fmt, ...)
fs/btrfs/export.c +4 -4
index 1f3755b3a37ae..665ec85cb09b8 100644
@@ -57,9 +57,9 @@ static int btrfs_encode_fh(struct inode *inode, u32 *fh, int *max_len,
 	return type;
 }
 
-static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
-				       u64 root_objectid, u32 generation,
-				       int check_generation)
+struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
+				u64 root_objectid, u32 generation,
+				int check_generation)
 {
 	struct btrfs_fs_info *fs_info = btrfs_sb(sb);
 	struct btrfs_root *root;
@@ -152,7 +152,7 @@ static struct dentry *btrfs_fh_to_dentry(struct super_block *sb, struct fid *fh,
 	return btrfs_get_dentry(sb, objectid, root_objectid, generation, 1);
 }
 
-static struct dentry *btrfs_get_parent(struct dentry *child)
+struct dentry *btrfs_get_parent(struct dentry *child)
 {
 	struct inode *dir = d_inode(child);
 	struct btrfs_fs_info *fs_info = btrfs_sb(dir->i_sb);
fs/btrfs/export.h +5 -0
index 57488ecd7d4ef..f32f4113c976a 100644
@@ -18,4 +18,9 @@ struct btrfs_fid {
 	u64 parent_root_objectid;
 } __attribute__ ((packed));
 
+struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
+				u64 root_objectid, u32 generation,
+				int check_generation);
+struct dentry *btrfs_get_parent(struct dentry *child);
+
 #endif
fs/btrfs/super.c +4 -4
index ed539496089f1..3e6e21a7c5e6f 100644
@@ -1000,8 +1000,8 @@ out:
 	return error;
 }
 
-static char *get_subvol_name_from_objectid(struct btrfs_fs_info *fs_info,
-					   u64 subvol_objectid)
+char *btrfs_get_subvol_name_from_objectid(struct btrfs_fs_info *fs_info,
+					  u64 subvol_objectid)
 {
 	struct btrfs_root *root = fs_info->tree_root;
 	struct btrfs_root *fs_root;
@@ -1412,8 +1412,8 @@ static struct dentry *mount_subvol(const char *subvol_name, u64 subvol_objectid,
 				goto out;
 			}
 		}
-		subvol_name = get_subvol_name_from_objectid(btrfs_sb(mnt->mnt_sb),
-							    subvol_objectid);
+		subvol_name = btrfs_get_subvol_name_from_objectid(
+					btrfs_sb(mnt->mnt_sb), subvol_objectid);
 		if (IS_ERR(subvol_name)) {
 			root = ERR_CAST(subvol_name);
 			subvol_name = NULL;
Signature · 1 line
2.25.1
author maintainer
#14 lore raw

PATCH 12/71 mm: include CMA pages in lowmem_reserve at boot

In reply to Greg Kroah-Hartman

From: Doug Berger <[email protected]>

commit e08d3fdfe2dafa0331843f70ce1ff6c1c4900bf4 upstream.

The lowmem_reserve arrays provide a means of applying pressure against allocations from lower zones that were targeted at higher zones. Its values are a function of the number of pages managed by higher zones and are assigned by a call to the setup_per_zone_lowmem_reserve() function.

The function is initially called at boot time by the function init_per_zone_wmark_min() and may be called later by accesses of the /proc/sys/vm/lowmem_reserve_ratio sysctl file.

The function init_per_zone_wmark_min() was moved up from a module_init to a core_initcall to resolve a sequencing issue with khugepaged. Unfortunately this created a sequencing issue with CMA page accounting.

The CMA pages are added to the managed page count of a zone when cma_init_reserved_areas() is called at boot also as a core_initcall. This makes it uncertain whether the CMA pages will be added to the managed page counts of their zones before or after the call to init_per_zone_wmark_min() as it becomes dependent on link order. With the current link order the pages are added to the managed count after the lowmem_reserve arrays are initialized at boot.

This means the lowmem_reserve values at boot may be lower than the values used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the ratio values are unchanged.

In many cases the difference is not significant, but for example an ARM platform with 1GB of memory and the following memory layout

cma: Reserved 256 MiB at 0x0000000030000000
Zone ranges:

    DMA      [mem 0x0000000000000000-0x000000002fffffff]
    Normal   empty
    HighMem  [mem 0x0000000030000000-0x000000003fffffff]

would result in 0 lowmem_reserve for the DMA zone. This would allow userspace to deplete the DMA zone easily.

Funnily enough

  $ cat /proc/sys/vm/lowmem_reserve_ratio

would fix up the situation because as a side effect it forces setup_per_zone_lowmem_reserve.

This commit breaks the link order dependency by invoking init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages have the chance to be properly accounted in their zone(s) and allowing the lowmem_reserve arrays to receive consistent values.

Fixes bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization")
Cc Jason Baron <[email protected]>
Cc David Rientjes <[email protected]>
Cc "Kirill A. Shutemov" <[email protected]>
---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/page_alloc.c +1 -1
@@ -7395,7 +7395,7 @@ int __meminit init_per_zone_wmark_min(vo
 
 	return 0;
 }
-core_initcall(init_per_zone_wmark_min)
+postcore_initcall(init_per_zone_wmark_min)
 
 /*
  * min_free_kbytes_sysctl_handler - just a wrapper around proc_dointvec() so
author maintainer
#12 lore raw

PATCH 10/71 romfs: fix uninitialized memory leak in romfs_dev_read()

In reply to Greg Kroah-Hartman

From: Jann Horn <[email protected]>

commit bcf85fcedfdd17911982a3e3564fcfec7b01eebd upstream.

romfs has a superblock field that limits the size of the filesystem; data beyond that limit is never accessed.

romfs_dev_read() fetches a caller-supplied number of bytes from the backing device. It returns 0 on success or an error code on failure; therefore, its API can't represent short reads, it's all-or-nothing.

However, when romfs_dev_read() detects that the requested operation would cross the filesystem size limit, it currently silently truncates the requested number of bytes. This e.g. means that when the content of a file with size 0x1000 starts one byte before the filesystem size limit, ->readpage() will only fill a single byte of the supplied page while leaving the rest uninitialized, leaking that uninitialized memory to userspace.

Fix it by returning an error code instead of truncating the read when the requested read operation would go beyond the end of the filesystem.

Fixes da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Cc David Howells <[email protected]>
---
 fs/romfs/storage.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
fs/romfs/storage.c +1 -3
@@ -221,10 +221,8 @@ int romfs_dev_read(struct super_block *s
 	size_t limit;
 
 	limit = romfs_maxsize(sb);
-	if (pos >= limit)
+	if (pos >= limit || buflen > limit - pos)
 		return -EIO;
-	if (buflen > limit - pos)
-		buflen = limit - pos;
 
 #ifdef CONFIG_ROMFS_ON_MTD
 	if (sb->s_mtd)
author maintainer
#1 lore raw

PATCH 1/71 drm/vgem: Replace opencoded version of drm_gem_dumb_map_offset()

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

[ Upstream commit 119c53d2d4044c59c450c4f5a568d80b9d861856 ]

drm_gem_dumb_map_offset() now exists and does everything vgem_gem_dump_map does and *ought* to do.

In particular, vgem_gem_dumb_map() was trying to reject mmapping an imported dmabuf by checking the existence of obj->filp. Unfortunately, we always allocated an obj->filp, even if unused for an imported dmabuf. Instead, the drm_gem_dumb_map_offset(), since commit 90378e589192 ("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the obj->import_attach to reject such invalid mmaps.

This prevents vgem from allowing userspace mmapping the dumb handle and attempting to incorrectly fault in remote pages belonging to another device, where there may not even be a struct page.

v2: Use the default drm_gem_dumb_map_offset() callback

Fixes af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces")
Cc <[email protected]> # v4.13+
---
 drivers/gpu/drm/vgem/vgem_drv.c | 27 ---------------------------
 1 file changed, 27 deletions(-)
drivers/gpu/drm/vgem/vgem_drv.c +0 -27
index 4709f08f39e49..1c1a435d354bc 100644
@@ -219,32 +219,6 @@ static int vgem_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
 	return 0;
 }
 
-static int vgem_gem_dumb_map(struct drm_file *file, struct drm_device *dev,
-			     uint32_t handle, uint64_t *offset)
-{
-	struct drm_gem_object *obj;
-	int ret;
-
-	obj = drm_gem_object_lookup(file, handle);
-	if (!obj)
-		return -ENOENT;
-
-	if (!obj->filp) {
-		ret = -EINVAL;
-		goto unref;
-	}
-
-	ret = drm_gem_create_mmap_offset(obj);
-	if (ret)
-		goto unref;
-
-	*offset = drm_vma_node_offset_addr(&obj->vma_node);
-unref:
-	drm_gem_object_put_unlocked(obj);
-
-	return ret;
-}
-
 static struct drm_ioctl_desc vgem_ioctls[] = {
 	DRM_IOCTL_DEF_DRV(VGEM_FENCE_ATTACH, vgem_fence_attach_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
 	DRM_IOCTL_DEF_DRV(VGEM_FENCE_SIGNAL, vgem_fence_signal_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
@@ -438,7 +412,6 @@ static struct drm_driver vgem_driver = {
 	.fops				= &vgem_driver_fops,
 
 	.dumb_create			= vgem_gem_dumb_create,
-	.dumb_map_offset		= vgem_gem_dumb_map,
 
 	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
 	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
Signature · 1 line
2.25.1
maintainer Tested-by on the v1 series
#77 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.142 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 26 Aug 2020 08:23:34 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.142-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v4.19:

    11 builds:	11 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version: 4.19.142-rc1-g62187e309cc4
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Jon

#10 lore raw

Re: [PATCH 4.19 09/71] btrfs: sysfs: use NOFS for device creation

In reply to Greg Kroah-Hartman

Hi!

Quoted 3 lines

From: Josef Bacik <[email protected]>

Dave hit this splat during testing btrfs/078:

...

Quoted 1 line

This commit is in mainline, as a47bd78d0c44621efb98b525d04d60dc4d1a79b0, but is not marked as such.

Best regards,
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#25 lore raw

Re: [PATCH 4.19 22/71] scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM

In reply to Greg Kroah-Hartman

Hi!

Quoted 12 lines

From: Bodo Stroesser <[email protected]>

[ Upstream commit 3145550a7f8b08356c8ff29feaa6c56aca12901d ]

This patch fixes the following crash (see
https://bugzilla.kernel.org/show_bug.cgi?id=208045)

Process iscsi_trx (pid: 7496, stack limit = 0x0000000010dd111a)

 CPU: 0 PID: 7496 Comm: iscsi_trx Not tainted 4.19.118-0419118-generic
        #202004230533
 Hardware name: Greatwall QingTian DF720/F601, BIOS 601FBE20 Sep 26 2019
 pstate: 80400005 (Nzcv daif +PAN -UAO)

...

Quoted 6 lines

The solution is based on patch:

"scsi: target: tcmu: Optimize use of flush_dcache_page"

which restricts the use of tcmu_flush_dcache_range() to addresses from vmalloc'ed areas only.

Yeah, but the patch mentioned is not queued for 4.19, so we should not be simply applying this to 4.19. Does it need to be cherry-picked, too?

commit 3c58f737231e2c8cbf543a09d84d8c8e80e05e43
Author: Bodo Stroesser <[email protected]>

scsi: target: tcmu: Optimize use of flush_dcache_page

(scatter|gather)_data_area() need to flush dcache after writing data to or

Best regards,
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#69 lore raw

Re: [PATCH 4.19 65/71] powerpc/pseries: Do not initiate shutdown when system is running on UPS

In reply to Greg Kroah-Hartman

Hi!

Quoted 3 lines

We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW

Yeah, so there's userspace tool, and currently systems _with_ that tool work poorly with UPS.

So you have fixed that, and now, systems _without_ that tool will work poorly.

That's not a fix for serious bug, that's behaviour change. You are fixing one set of systems and breaking another.

I don't believe it is suitable for stable.

Pavel

Quoted 9 lines
arch/powerpc/platforms/pseries/ras.c +0 -1
@@ -118,7 +118,6 @@ static void handle_system_shutdown(char
 	case EPOW_SHUTDOWN_ON_UPS:
 		pr_emerg("Loss of system power detected. System is running on"
 			 " UPS/battery. Check RTAS error log for details\n");
-		orderly_poweroff(true);
 		break;
 
 	case EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS:
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
maintainer
#11 lore raw

Re: [PATCH 4.19 09/71] btrfs: sysfs: use NOFS for device creation

In reply to Pavel Machek
Quoted 4 lines · Pavel Machek

Hi!

Quoted 2 lines

From: Josef Bacik <[email protected]>

Quoted 8 lines
Quoted 1 line

Dave hit this splat during testing btrfs/078:

...

Quoted 1 line

This commit is in mainline, as a47bd78d0c44621efb98b525d04d60dc4d1a79b0, but is not marked as such.

Fixed, thanks!

Signature · 2 lines
Thanks,
Sasha
#78 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 5 lines

This is the start of the stable review cycle for the 4.19.142 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines

Responses should be made by Wed, 26 Aug 2020 08:23:34 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.142-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

Uh. I believe this was tested successfully by CIP probject:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/181017473

Yes, there are two "fails" but there seem to be caused by DNS resolution problems (i.e. test infrastructure problem, not kernel problem).

Best regards,
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
author maintainer
#79 lore raw
Quoted 16 lines · Pavel Machek

Hi!

Quoted 5 lines

This is the start of the stable review cycle for the 4.19.142 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines

Responses should be made by Wed, 26 Aug 2020 08:23:34 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.142-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

Quoted 6 lines

Uh. I believe this was tested successfully by CIP probject:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/181017473

Yes, there are two "fails" but there seem to be caused by DNS resolution problems (i.e. test infrastructure problem, not kernel problem).

Thanks for testing two of these and letting me know.

greg k-h

#70 lore raw

Re: [PATCH 4.19 65/71] powerpc/pseries: Do not initiate shutdown when system is running on UPS

In reply to Pavel Machek
Quoted 2 lines · Pavel Machek

Hi!

Hi Pavel,

Quoted 9 lines
Quoted 3 lines

We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW

Yeah, so there's userspace tool, and currently systems _with_ that tool work poorly with UPS.

So you have fixed that, and now, systems _without_ that tool will work poorly.

User space tool exists for long long time (more than decade) and its default tool on pseries system. Also user space tool behavior is not changed for long time.

The original design was to forward UPS event to userspace and let user space wait for predefined time and then initiate shutdown.

Previous fix accidentally initiated shutdown as soon as system switch to UPS power.

Quoted 3 lines

That's not a fix for serious bug, that's behaviour change. You are fixing one set of systems and breaking another.

Without fix, as soon as system switches to UPS power supply, kernel will start shutdown process. which is not correct. Its actually impacting customers running Linux on pseries LPAR mode. Hence I have requested this fix for stable tree.

Hope this clarifies your concern.

-Vasant

Quoted 15 lines

I don't believe it is suitable for stable.

Pavel

Quoted 9 lines
arch/powerpc/platforms/pseries/ras.c +0 -1
@@ -118,7 +118,6 @@ static void handle_system_shutdown(char
  	case EPOW_SHUTDOWN_ON_UPS:
  		pr_emerg("Loss of system power detected. System is running on"
  			 " UPS/battery. Check RTAS error log for details\n");
-		orderly_poweroff(true);
  		break;
 
  	case EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS: