Skip to contentSkip to conversation

Fix FSP-3Y YH-5151E non-compliant vout encoding

PATCH Superseded Václav Kubernát 2 participants 2 messages Apr 27, 2021 Hardware monitoring

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix FSP-3Y YH-5151E non-compliant vout encoding

I didn't properly test the driver for the PDU, so it was completely broken. Firstly, the log/real mapping was incorrect in one case. Secondly, PMBus specifies that output voltages should be in the linear16 encoding. However, the PDU is non-compliant and uses linear11. The PSU isn't affected by this.

pmbus_core didn't allow forcing linear11 format for output voltages, so I added a way to force that.

---
 drivers/hwmon/pmbus/fsp-3y.c     | 3 ++-
 drivers/hwmon/pmbus/pmbus.h      | 6 +++++-
 drivers/hwmon/pmbus/pmbus_core.c | 3 ++-
 3 files changed, 9 insertions(+), 3 deletions(-)
drivers/hwmon/pmbus/fsp-3y.c +2 -1
index 564649e87e34..b4ea1e63272e 100644
@@ -57,7 +57,7 @@ static int page_log_to_page_real(int page_log, enum chips chip)
 		case YH5151E_PAGE_12V_LOG:
 			return YH5151E_PAGE_12V_REAL;
 		case YH5151E_PAGE_5V_LOG:
-			return YH5151E_PAGE_5V_LOG;
+			return YH5151E_PAGE_5V_REAL;
 		case YH5151E_PAGE_3V3_LOG:
 			return YH5151E_PAGE_3V3_REAL;
 		}
@@ -164,6 +164,7 @@ struct pmbus_driver_info fsp3y_info[] = {
 	},
 	[yh5151e] = {
 		.pages = 3,
+		.format[PSC_VOLTAGE_OUT] = force_linear11,
 		.func[YH5151E_PAGE_12V_LOG] =
 			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
 			PMBUS_HAVE_POUT  |
drivers/hwmon/pmbus/pmbus.h +5 -1
index 4c30ec89f5bf..4d79a43fc965 100644
@@ -405,7 +405,11 @@ enum pmbus_sensor_classes {
 #define PMBUS_PHASE_VIRTUAL	BIT(30)	/* Phases on this page are virtual */
 #define PMBUS_PAGE_VIRTUAL	BIT(31)	/* Page is virtual */
 
-enum pmbus_data_format { linear = 0, direct, vid };
+/*
+ * force_linear11 is for non-compliant devices that output VOUT in linear11
+ * instead of linear16.
+ */
+enum pmbus_data_format { linear = 0, force_linear11, direct, vid };
 enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
 
 struct pmbus_driver_info {
drivers/hwmon/pmbus/pmbus_core.c +2 -1
index 192442b3b7a2..45a0d0303c19 100644
@@ -589,7 +589,8 @@ static s64 pmbus_reg2data_linear(struct pmbus_data *data,
 	s32 mantissa;
 	s64 val;
 
-	if (sensor->class == PSC_VOLTAGE_OUT) {	/* LINEAR16 */
+	if (sensor->class == PSC_VOLTAGE_OUT &&	/* LINEAR16 */
+	    data->info->format[sensor->class] != force_linear11) {
 		exponent = data->exponent[sensor->page];
 		mantissa = (u16) sensor->data;
 	} else {				/* LINEAR11 */
Signature · 1 line
2.31.1
maintainer
#1 lore raw
Quoted 4 lines · Václav Kubernát

I didn't properly test the driver for the PDU, so it was completely broken. Firstly, the log/real mapping was incorrect in one case. Secondly, PMBus specifies that output voltages should be in the linear16 encoding. However, the PDU is non-compliant and uses linear11. The PSU

It would be better to refer to YH5151E and YM2151; the reader won't know how PSU and PDU map to the to the two power supplies supported by the driver (and I don't know either).

Quoted 5 lines

isn't affected by this.

pmbus_core didn't allow forcing linear11 format for output voltages, so I added a way to force that.

Please don't do that. The driver should convert the linear11 values to linear16 for the affected device(s) in fsp3y_read_word_data().

Thanks,
Guenter

Quoted 62 lines
---
 drivers/hwmon/pmbus/fsp-3y.c     | 3 ++-
 drivers/hwmon/pmbus/pmbus.h      | 6 +++++-
 drivers/hwmon/pmbus/pmbus_core.c | 3 ++-
 3 files changed, 9 insertions(+), 3 deletions(-)
drivers/hwmon/pmbus/fsp-3y.c +2 -1
index 564649e87e34..b4ea1e63272e 100644
@@ -57,7 +57,7 @@ static int page_log_to_page_real(int page_log, enum chips chip)
 		case YH5151E_PAGE_12V_LOG:
 			return YH5151E_PAGE_12V_REAL;
 		case YH5151E_PAGE_5V_LOG:
-			return YH5151E_PAGE_5V_LOG;
+			return YH5151E_PAGE_5V_REAL;
 		case YH5151E_PAGE_3V3_LOG:
 			return YH5151E_PAGE_3V3_REAL;
 		}
@@ -164,6 +164,7 @@ struct pmbus_driver_info fsp3y_info[] = {
 	},
 	[yh5151e] = {
 		.pages = 3,
+		.format[PSC_VOLTAGE_OUT] = force_linear11,
 		.func[YH5151E_PAGE_12V_LOG] =
 			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
 			PMBUS_HAVE_POUT  |
drivers/hwmon/pmbus/pmbus.h +5 -1
index 4c30ec89f5bf..4d79a43fc965 100644
@@ -405,7 +405,11 @@ enum pmbus_sensor_classes {
 #define PMBUS_PHASE_VIRTUAL	BIT(30)	/* Phases on this page are virtual */
 #define PMBUS_PAGE_VIRTUAL	BIT(31)	/* Page is virtual */
 
-enum pmbus_data_format { linear = 0, direct, vid };
+/*
+ * force_linear11 is for non-compliant devices that output VOUT in linear11
+ * instead of linear16.
+ */
+enum pmbus_data_format { linear = 0, force_linear11, direct, vid };
 enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
 
 struct pmbus_driver_info {
drivers/hwmon/pmbus/pmbus_core.c +2 -1
index 192442b3b7a2..45a0d0303c19 100644
@@ -589,7 +589,8 @@ static s64 pmbus_reg2data_linear(struct pmbus_data *data,
 	s32 mantissa;
 	s64 val;
 
-	if (sensor->class == PSC_VOLTAGE_OUT) {	/* LINEAR16 */
+	if (sensor->class == PSC_VOLTAGE_OUT &&	/* LINEAR16 */
+	    data->info->format[sensor->class] != force_linear11) {
 		exponent = data->exponent[sensor->page];
 		mantissa = (u16) sensor->data;
 	} else {				/* LINEAR11 */
Signature · 1 line
2.31.1