Skip to contentSkip to conversation

5.4.133-rc1 review

PATCH In review Greg Kroah-Hartman 8 participants 132 messages Jul 15, 2021 – Jul 17, 2021

Subsystems (4)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/122 drm/mxsfb: Dont select DRM_KMS_FB_HELPER

In reply to Greg Kroah-Hartman

From: Thomas Zimmermann <[email protected]>

[ Upstream commit 13b29cc3a722c2c0bc9ab9f72f9047d55d08a2f9 ]

Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this.

---
 drivers/gpu/drm/mxsfb/Kconfig | 1 -
 1 file changed, 1 deletion(-)
drivers/gpu/drm/mxsfb/Kconfig +0 -1
index 0dca8f27169e..33916b7b2c50 100644
@@ -10,7 +10,6 @@ config DRM_MXSFB
 	depends on COMMON_CLK
 	select DRM_MXS
 	select DRM_KMS_HELPER
-	select DRM_KMS_FB_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_PANEL
 	help
Signature · 1 line
2.30.2
author maintainer
#10 lore raw

PATCH 10/122 atm: nicstar: Fix possible use-after-free in nicstar_cleanup()

In reply to Greg Kroah-Hartman

From: Zou Wei <[email protected]>

[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]

This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

---
 drivers/atm/nicstar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/nicstar.c +1 -1
index bb9835c62641..5ec7b6a60145 100644
@@ -297,7 +297,7 @@ static void __exit nicstar_cleanup(void)
 {
 	XPRINTK("nicstar: nicstar_cleanup() called.\n");
 
-	del_timer(&ns_timer);
+	del_timer_sync(&ns_timer);
 
 	pci_unregister_driver(&nicstar_driver);
 
Signature · 1 line
2.30.2
author maintainer
#11 lore raw

PATCH 11/122 net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT

In reply to Greg Kroah-Hartman

From: Sebastian Andrzej Siewior <[email protected]>

[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]

__napi_schedule_irqoff() is an optimized version of __napi_schedule() which can be used where it is known that interrupts are disabled, e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force- threaded interrupt handlers and spinlocks are not disabling interrupts and the NAPI hrtimer callback is forced into softirq context which runs with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole game so make __napi_schedule_irqoff() invoke __napi_schedule() for PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been audited and are correct on PREEMPT_RT kernels as well.

---
 net/core/dev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
net/core/dev.c +9 -2
index e226f266da9e..3810eaf89b26 100644
@@ -5972,11 +5972,18 @@ EXPORT_SYMBOL(napi_schedule_prep);
  * __napi_schedule_irqoff - schedule for receive
  * @n: entry to schedule
  *
- * Variant of __napi_schedule() assuming hard irqs are masked
+ * Variant of __napi_schedule() assuming hard irqs are masked.
+ *
+ * On PREEMPT_RT enabled kernels this maps to __napi_schedule()
+ * because the interrupt disabled assumption might not be true
+ * due to force-threaded interrupts and spinlock substitution.
  */
 void __napi_schedule_irqoff(struct napi_struct *n)
 {
-	____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	else
+		__napi_schedule(n);
 }
 EXPORT_SYMBOL(__napi_schedule_irqoff);
 
Signature · 1 line
2.30.2
author maintainer
#12 lore raw

PATCH 12/122 drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()

In reply to Greg Kroah-Hartman

From: Wang Li <[email protected]>

[ Upstream commit 69777e6ca396f0a7e1baff40fcad4a9d3d445b7a ]

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/mediatek/mtk_drm_crtc.c +1 -1
index f9455f2724d2..f370d41b3d04 100644
@@ -240,7 +240,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 		drm_connector_list_iter_end(&conn_iter);
 	}
 
-	ret = pm_runtime_get_sync(crtc->dev->dev);
+	ret = pm_runtime_resume_and_get(crtc->dev->dev);
 	if (ret < 0) {
 		DRM_ERROR("Failed to enable power domain: %d\n", ret);
 		return ret;
Signature · 1 line
2.30.2
author maintainer
#13 lore raw

PATCH 13/122 reiserfs: add check for invalid 1st journal block

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]

syzbot reported divide error in reiserfs.
The problem was in incorrect journal 1st block.

Syzbot's reproducer manualy generated wrong superblock with incorrect 1st block. In journal_init() wasn't any checks about this particular case.

For example, if 1st journal block is before superblock 1st block, it can cause zeroing important superblock members in do_journal_end().

---
 fs/reiserfs/journal.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
fs/reiserfs/journal.c +14 -0
index 4b3e3e73b512..09ad022a78a5 100644
@@ -2763,6 +2763,20 @@ int journal_init(struct super_block *sb, const char *j_dev_name,
 		goto free_and_return;
 	}
 
+	/*
+	 * Sanity check to see if journal first block is correct.
+	 * If journal first block is invalid it can cause
+	 * zeroing important superblock members.
+	 */
+	if (!SB_ONDISK_JOURNAL_DEVICE(sb) &&
+	    SB_ONDISK_JOURNAL_1st_BLOCK(sb) < SB_JOURNAL_1st_RESERVED_BLOCK(sb)) {
+		reiserfs_warning(sb, "journal-1393",
+				 "journal 1st super block is invalid: 1st reserved block %d, but actual 1st block is %d",
+				 SB_JOURNAL_1st_RESERVED_BLOCK(sb),
+				 SB_ONDISK_JOURNAL_1st_BLOCK(sb));
+		goto free_and_return;
+	}
+
 	if (journal_init_dev(sb, journal, j_dev_name) != 0) {
 		reiserfs_warning(sb, "sh-462",
 				 "unable to initialize journal device");
Signature · 1 line
2.30.2
author maintainer
#15 lore raw

PATCH 15/122 drm/sched: Avoid data corruptions

In reply to Greg Kroah-Hartman

From: Andrey Grodzovsky <[email protected]>

[ Upstream commit 0b10ab80695d61422337ede6ff496552d8ace99d ]

Wait for all dependencies of a job to complete before killing it to avoid data corruptions.

---
 drivers/gpu/drm/scheduler/sched_entity.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/scheduler/sched_entity.c +5 -0
index 1a5153197fe9..57f9baad9e36 100644
@@ -235,11 +235,16 @@ static void drm_sched_entity_kill_jobs_cb(struct dma_fence *f,
 static void drm_sched_entity_kill_jobs(struct drm_sched_entity *entity)
 {
 	struct drm_sched_job *job;
+	struct dma_fence *f;
 	int r;
 
 	while ((job = to_drm_sched_job(spsc_queue_pop(&entity->job_queue)))) {
 		struct drm_sched_fence *s_fence = job->s_fence;
 
+		/* Wait for all dependencies to avoid data corruptions */
+		while ((f = job->sched->ops->dependency(job, entity)))
+			dma_fence_wait(f, false);
+
 		drm_sched_fence_scheduled(s_fence);
 		dma_fence_set_error(&s_fence->finished, -ESRCH);
 
Signature · 1 line
2.30.2
author maintainer
#16 lore raw

PATCH 16/122 udf: Fix NULL pointer dereference in udf_symlink function

In reply to Greg Kroah-Hartman

From: Arturo Giusti <[email protected]>

[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]

In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails.

This fix adds a check to validate the value of epos.bh.

---
 fs/udf/namei.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/udf/namei.c +4 -0
index 77b6d89b9bcd..3c3d3b20889c 100644
@@ -933,6 +933,10 @@ static int udf_symlink(struct inode *dir, struct dentry *dentry,
 				iinfo->i_location.partitionReferenceNum,
 				0);
 		epos.bh = udf_tgetblk(sb, block);
+		if (unlikely(!epos.bh)) {
+			err = -ENOMEM;
+			goto out_no_entry;
+		}
 		lock_buffer(epos.bh);
 		memset(epos.bh->b_data, 0x00, bsize);
 		set_buffer_uptodate(epos.bh);
Signature · 1 line
2.30.2
author maintainer
#17 lore raw

PATCH 17/122 e100: handle eeprom as little endian

In reply to Greg Kroah-Hartman

From: Jesse Brandeburg <[email protected]>

[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]

Sparse tool was warning on some implicit conversions from little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using le16_to_cpu().

---
 drivers/net/ethernet/intel/e100.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/e100.c +6 -6
index a65d5a9ba7db..911b3d2a94e1 100644
@@ -1398,7 +1398,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
 	u8 phy_type;
 	int without_mii;
 
-	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+	phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
 
 	switch (phy_type) {
 	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1518,7 +1518,7 @@ static int e100_phy_init(struct nic *nic)
 		mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
 	} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
 	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+	   (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
 		/* enable/disable MDI/MDI-X auto-switching. */
 		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
 				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2266,9 +2266,9 @@ static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
 	return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
-	   (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
-	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
-	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+	   (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+	   !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+	   ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
 }
 
 static int e100_up(struct nic *nic)
@@ -2924,7 +2924,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Wol magic packet can be enabled from eeprom */
 	if ((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+	   (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
 		device_set_wakeup_enable(&pdev->dev, true);
 	}
Signature · 1 line
2.30.2
author maintainer
#18 lore raw

PATCH 18/122 igb: handle vlan types with checker enabled

In reply to Greg Kroah-Hartman

From: Jesse Brandeburg <[email protected]>

[ Upstream commit c7cbfb028b95360403d579c47aaaeef1ff140964 ]

The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too.

Also change the vlan_tci assignment to override the sparse warning without changing functionality.

---
 drivers/net/ethernet/intel/igb/igb_main.c | 5 +++--
 drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/igb/igb_main.c +3 -2
index 7a4e2b014dd6..c37f0590b3a4 100644
@@ -2651,7 +2651,8 @@ static int igb_parse_cls_flower(struct igb_adapter *adapter,
 			}
 
 			input->filter.match_flags |= IGB_FILTER_FLAG_VLAN_TCI;
-			input->filter.vlan_tci = match.key->vlan_priority;
+			input->filter.vlan_tci =
+				(__force __be16)match.key->vlan_priority;
 		}
 	}
 
@@ -8255,7 +8256,7 @@ static void igb_process_skb_fields(struct igb_ring *rx_ring,
 
 		if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
 		    test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
-			vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+			vid = be16_to_cpu((__force __be16)rx_desc->wb.upper.vlan);
 		else
 			vid = le16_to_cpu(rx_desc->wb.upper.vlan);
 
drivers/net/ethernet/intel/igbvf/netdev.c +2 -2
index 0f2b68f4bb0f..77cb2ab7dab4 100644
@@ -83,14 +83,14 @@ static int igbvf_desc_unused(struct igbvf_ring *ring)
 static void igbvf_receive_skb(struct igbvf_adapter *adapter,
 			      struct net_device *netdev,
 			      struct sk_buff *skb,
-			      u32 status, u16 vlan)
+			      u32 status, __le16 vlan)
 {
 	u16 vid;
 
 	if (status & E1000_RXD_STAT_VP) {
 		if ((adapter->flags & IGBVF_FLAG_RX_LB_VLAN_BSWAP) &&
 		    (status & E1000_RXDEXT_STATERR_LB))
-			vid = be16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+			vid = be16_to_cpu((__force __be16)vlan) & E1000_RXD_SPC_VLAN_MASK;
 		else
 			vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
 		if (test_bit(vid, adapter->active_vlans))
Signature · 1 line
2.30.2
author maintainer
#19 lore raw

PATCH 19/122 drm/bridge: cdns: Fix PM reference leak in cdns_dsi_transfer()

In reply to Greg Kroah-Hartman

From: Zou Wei <[email protected]>

[ Upstream commit 33f90f27e1c5ccd648d3e78a1c28be9ee8791cf1 ]

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

---
 drivers/gpu/drm/bridge/cdns-dsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/cdns-dsi.c +1 -1
index 6166dca6be81..0cb9dd6986ec 100644
@@ -1026,7 +1026,7 @@ static ssize_t cdns_dsi_transfer(struct mipi_dsi_host *host,
 	struct mipi_dsi_packet packet;
 	int ret, i, tx_len, rx_len;
 
-	ret = pm_runtime_get_sync(host->dev);
+	ret = pm_runtime_resume_and_get(host->dev);
 	if (ret < 0)
 		return ret;
 
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH 2/122 drm/zte: Dont select DRM_KMS_FB_HELPER

In reply to Greg Kroah-Hartman

From: Thomas Zimmermann <[email protected]>

[ Upstream commit a50e74bec1d17e95275909660c6b43ffe11ebcf0 ]

Selecting DRM_FBDEV_EMULATION will include the correct settings for fbdev emulation. Drivers should not override this.

---
 drivers/gpu/drm/zte/Kconfig | 1 -
 1 file changed, 1 deletion(-)
drivers/gpu/drm/zte/Kconfig +0 -1
index 90ebaedc11fd..aa8594190b50 100644
@@ -3,7 +3,6 @@ config DRM_ZTE
 	tristate "DRM Support for ZTE SoCs"
 	depends on DRM && ARCH_ZX
 	select DRM_KMS_CMA_HELPER
-	select DRM_KMS_FB_HELPER
 	select DRM_KMS_HELPER
 	select SND_SOC_HDMI_CODEC if SND_SOC
 	select VIDEOMODE_HELPERS
Signature · 1 line
2.30.2
author maintainer
#20 lore raw

PATCH 20/122 clk: renesas: r8a77995: Add ZA2 clock

In reply to Greg Kroah-Hartman

From: Kuninori Morimoto <[email protected]>

[ Upstream commit 790c06cc5df263cdaff748670cc65958c81b0951 ]

R-Car D3 ZA2 clock is from PLL0D3 or S0,
and it can be controlled by ZA2CKCR.
It is needed for R-Car Sound, but is not used so far. Using default settings is very enough at this point. This patch adds it by DEF_FIXED().

---
 drivers/clk/renesas/r8a77995-cpg-mssr.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/renesas/r8a77995-cpg-mssr.c +1 -0
index 962bb337f2e7..315f0d4bc420 100644
@@ -75,6 +75,7 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
 	DEF_RATE(".oco",       CLK_OCO,            8 * 1000 * 1000),
 
 	/* Core Clock Outputs */
+	DEF_FIXED("za2",       R8A77995_CLK_ZA2,   CLK_PLL0D3,     2, 1),
 	DEF_FIXED("z2",        R8A77995_CLK_Z2,    CLK_PLL0D3,     1, 1),
 	DEF_FIXED("ztr",       R8A77995_CLK_ZTR,   CLK_PLL1,       6, 1),
 	DEF_FIXED("zt",        R8A77995_CLK_ZT,    CLK_PLL1,       4, 1),
Signature · 1 line
2.30.2
author maintainer
#21 lore raw

PATCH 21/122 clk: tegra: Ensure that PLLU configuration is applied properly

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit a7196048cd5168096c2c4f44a3939d7a6dcd06b9 ]

The PLLU (USB) consists of the PLL configuration itself and configuration of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114, where T114 immediately bails out if PLLU is enabled and T30 re-enables a potentially already enabled PLL (left after bootloader) and then fully reprograms it, which could be unsafe to do. The correct way should be to skip enabling of the PLL if it's already enabled and then apply configuration to the outputs. This patch doesn't fix any known problems, it's a minor improvement.

---
 drivers/clk/tegra/clk-pll.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/clk/tegra/clk-pll.c +4 -5
index 80f640d9ea71..24ecfc114d41 100644
@@ -1089,7 +1089,8 @@ static int clk_pllu_enable(struct clk_hw *hw)
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
-	_clk_pll_enable(hw);
+	if (!clk_pll_is_enabled(hw))
+		_clk_pll_enable(hw);
 
 	ret = clk_pll_wait_for_lock(pll);
 	if (ret < 0)
@@ -1706,15 +1707,13 @@ static int clk_pllu_tegra114_enable(struct clk_hw *hw)
 		return -EINVAL;
 	}
 
-	if (clk_pll_is_enabled(hw))
-		return 0;
-
 	input_rate = clk_hw_get_rate(__clk_get_hw(osc));
 
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
-	_clk_pll_enable(hw);
+	if (!clk_pll_is_enabled(hw))
+		_clk_pll_enable(hw);
 
 	ret = clk_pll_wait_for_lock(pll);
 	if (ret < 0)
Signature · 1 line
2.30.2
author maintainer
#22 lore raw

PATCH 22/122 ipv6: use prandom_u32() for ID generation

In reply to Greg Kroah-Hartman

From: Willy Tarreau <[email protected]>

[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]

This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash table for IP ID generation"), but focusing on some specific aspects of IPv6.

Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a minimum MTU of 1280, it's much less easy to force a remote peer to produce many fragments to explore its ID sequence. In addition packet IDs are 32-bit in IPv6, which further complicates their analysis. On the other hand, it is often easier to choose among plenty of possible source addresses and partially work around the bigger hash table the commit above permits, which leaves IPv6 partially exposed to some possibilities of remote analysis at the risk of weakening some protocols like DNS if some IDs can be predicted with a good enough probability.

Given the wide range of permitted IDs, the risk of collision is extremely low so there's no need to rely on the positive increment algorithm that is shared with the IPv4 code via ip_idents_reserve(). We have a fast PRNG, so let's simply call prandom_u32() and be done with it.

Performance measurements at 10 Gbps couldn't show any difference with the previous code, even when using a single core, because due to the large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost of the random generation is completely offset by other operations and by the network transfer time. In addition, this change removes the need to update a shared entry in the idents table so it may even end up being slightly faster on large scale systems where this matters.

The risk of at least one collision here is about 1/80 million among 10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs, which remains very low compared to IPv4 where all IDs are reused every 4 to 80ms on a 10 Gbps flow depending on packet sizes.

---
 net/ipv6/output_core.c | 28 +++++-----------------------
 1 file changed, 5 insertions(+), 23 deletions(-)
net/ipv6/output_core.c +5 -23
index af36acc1a644..2880dc7d9a49 100644
@@ -15,29 +15,11 @@ static u32 __ipv6_select_ident(struct net *net,
 			       const struct in6_addr *dst,
 			       const struct in6_addr *src)
 {
-	const struct {
-		struct in6_addr dst;
-		struct in6_addr src;
-	} __aligned(SIPHASH_ALIGNMENT) combined = {
-		.dst = *dst,
-		.src = *src,
-	};
-	u32 hash, id;
-
-	/* Note the following code is not safe, but this is okay. */
-	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
-		get_random_bytes(&net->ipv4.ip_id_key,
-				 sizeof(net->ipv4.ip_id_key));
-
-	hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key);
-
-	/* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve,
-	 * set the hight order instead thus minimizing possible future
-	 * collisions.
-	 */
-	id = ip_idents_reserve(hash, 1);
-	if (unlikely(!id))
-		id = 1 << 31;
+	u32 id;
+
+	do {
+		id = prandom_u32();
+	} while (!id);
 
 	return id;
 }
Signature · 1 line
2.30.2
author maintainer
#3 lore raw

PATCH 3/122 drm/amd/amdgpu/sriov disable all ip hw status by default

In reply to Greg Kroah-Hartman

From: Jack Zhang <[email protected]>

[ Upstream commit 95ea3dbc4e9548d35ab6fbf67675cef8c293e2f5 ]

Disable all ip's hw status to false before any hw_init. Only set it to true until its hw_init is executed.

The old 5.9 branch has this change but somehow the 5.11 kernrel does not have this fix.

Without this change, sriov tdr have gfx IB test fail.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +1 -1
index 765f9a6c4640..d0e1fd011de5 100644
@@ -2291,7 +2291,7 @@ static int amdgpu_device_ip_reinit_early_sriov(struct amdgpu_device *adev)
 		AMD_IP_BLOCK_TYPE_IH,
 	};
 
-	for (i = 0; i < ARRAY_SIZE(ip_order); i++) {
+	for (i = 0; i < adev->num_ip_blocks; i++) {
 		int j;
 		struct amdgpu_ip_block *block;
 
Signature · 1 line
2.30.2
author maintainer
#23 lore raw

PATCH 23/122 RDMA/cxgb4: Fix missing error code in create_qp()

In reply to Greg Kroah-Hartman

From: Jiapeng Chong <[email protected]>

[ Upstream commit aeb27bb76ad8197eb47890b1ff470d5faf8ec9a5 ]

The error code is missing in this code scenario so 0 will be returned. Add the error code '-EINVAL' to the return value 'ret'.

Eliminates the follow smatch warning:

drivers/infiniband/hw/cxgb4/qp.c:298 create_qp() warn: missing error code 'ret'.

---
 drivers/infiniband/hw/cxgb4/qp.c | 1 +
 1 file changed, 1 insertion(+)
drivers/infiniband/hw/cxgb4/qp.c +1 -0
index e7472f0da59d..3ac08f47a8ce 100644
@@ -295,6 +295,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	if (user && (!wq->sq.bar2_pa || (need_rq && !wq->rq.bar2_pa))) {
 		pr_warn("%s: sqid %u or rqid %u not in BAR2 range\n",
 			pci_name(rdev->lldi.pdev), wq->sq.qid, wq->rq.qid);
+		ret = -EINVAL;
 		goto free_dma;
 	}
 
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 4/122 drm/vc4: fix argument ordering in vc4_crtc_get_margins()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e590c2b03a6143ba93ddad306bc9eaafa838c020 ]

Cppcheck complains that the declaration doesn't match the function definition. Obviously "left" should come before "right". The caller and the function implementation are done this way, it's just the declaration which is wrong so this doesn't affect runtime.

---
 drivers/gpu/drm/vc4/vc4_drv.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_drv.h +1 -1
index 6627b20c99e9..3ddaa817850d 100644
@@ -750,7 +750,7 @@ bool vc4_crtc_get_scanoutpos(struct drm_device *dev, unsigned int crtc_id,
 void vc4_crtc_handle_vblank(struct vc4_crtc *crtc);
 void vc4_crtc_txp_armed(struct drm_crtc_state *state);
 void vc4_crtc_get_margins(struct drm_crtc_state *state,
-			  unsigned int *right, unsigned int *left,
+			  unsigned int *left, unsigned int *right,
 			  unsigned int *top, unsigned int *bottom);
 
 /* vc4_debugfs.c */
Signature · 1 line
2.30.2
author maintainer
#5 lore raw

PATCH 5/122 net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]

Sparse is not happy about handling of strict types in pch_ptp_match():

.../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types)
.../pch_gbe_main.c:158:33: expected unsigned short [usertype] uid_hi
.../pch_gbe_main.c:158:33: got restricted __be16 [usertype]
.../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types)
.../pch_gbe_main.c:158:45: expected unsigned int [usertype] uid_lo
.../pch_gbe_main.c:158:45: got restricted __be32 [usertype]
.../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types)
.../pch_gbe_main.c:158:56: expected unsigned short [usertype] seqid
.../pch_gbe_main.c:158:56: got restricted __be16 [usertype]

Fix that by switching to use proper accessors to BE data.

---
 .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c  | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +6 -13
index f1269fe4ac72..8ff4c616f0ad 100644
@@ -107,7 +107,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 {
 	u8 *data = skb->data;
 	unsigned int offset;
-	u16 *hi, *id;
+	u16 hi, id;
 	u32 lo;
 
 	if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
@@ -118,14 +118,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 	if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid))
 		return 0;
 
-	hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID);
-	id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+	hi = get_unaligned_be16(data + offset + OFF_PTP_SOURCE_UUID + 0);
+	lo = get_unaligned_be32(data + offset + OFF_PTP_SOURCE_UUID + 2);
+	id = get_unaligned_be16(data + offset + OFF_PTP_SEQUENCE_ID);
 
-	memcpy(&lo, &hi[1], sizeof(lo));
-
-	return (uid_hi == *hi &&
-		uid_lo == lo &&
-		seqid  == *id);
+	return (uid_hi == hi && uid_lo == lo && seqid == id);
 }
 
 static void
@@ -135,7 +132,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
 	struct pci_dev *pdev;
 	u64 ns;
 	u32 hi, lo, val;
-	u16 uid, seq;
 
 	if (!adapter->hwts_rx_en)
 		return;
@@ -151,10 +147,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
 	lo = pch_src_uuid_lo_read(pdev);
 	hi = pch_src_uuid_hi_read(pdev);
 
-	uid = hi & 0xffff;
-	seq = (hi >> 16) & 0xffff;
-
-	if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq)))
+	if (!pch_ptp_match(skb, hi, lo, hi >> 16))
 		goto out;
 
 	ns = pch_rx_snap_read(pdev);
Signature · 1 line
2.30.2
author maintainer
#6 lore raw

PATCH 6/122 drm/amd/display: fix use_max_lb flag for 420 pixel formats

In reply to Greg Kroah-Hartman

From: Dmytro Laktyushkin <[email protected]>

[ Upstream commit 8809a7a4afe90ad9ffb42f72154d27e7c47551ae ]

Right now the flag simply selects memory config 0 when flag is true however 420 modes benefit more from memory config 3.

---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c +6 -3
index d67e0abeee93..11a89d873384 100644
@@ -484,10 +484,13 @@ static enum lb_memory_config dpp1_dscl_find_lb_memory_config(struct dcn10_dpp *d
 	int vtaps_c = scl_data->taps.v_taps_c;
 	int ceil_vratio = dc_fixpt_ceil(scl_data->ratios.vert);
 	int ceil_vratio_c = dc_fixpt_ceil(scl_data->ratios.vert_c);
-	enum lb_memory_config mem_cfg = LB_MEMORY_CONFIG_0;
 
-	if (dpp->base.ctx->dc->debug.use_max_lb)
-		return mem_cfg;
+	if (dpp->base.ctx->dc->debug.use_max_lb) {
+		if (scl_data->format == PIXEL_FORMAT_420BPP8
+				|| scl_data->format == PIXEL_FORMAT_420BPP10)
+			return LB_MEMORY_CONFIG_3;
+		return LB_MEMORY_CONFIG_0;
+	}
 
 	dpp->base.caps->dscl_calc_lb_num_partitions(
 			scl_data, LB_MEMORY_CONFIG_1, &num_part_y, &num_part_c);
Signature · 1 line
2.30.2
author maintainer
#7 lore raw

PATCH 7/122 hugetlb: clear huge pte during flush function on mips platform

In reply to Greg Kroah-Hartman

From: Bibo Mao <[email protected]>

[ Upstream commit 33ae8f801ad8bec48e886d368739feb2816478f2 ]

If multiple threads are accessing the same huge page at the same time, hugetlb_cow will be called if one thread write the COW huge page. And function huge_ptep_clear_flush is called to notify other threads to clear the huge pte tlb entry. The other threads clear the huge pte tlb entry and reload it from page table, the reload huge pte entry may be old.

This patch fixes this issue on mips platform, and it clears huge pte entry before notifying other threads to flush current huge page entry, it is similar with other architectures.

---
 arch/mips/include/asm/hugetlb.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
arch/mips/include/asm/hugetlb.h +7 -1
index 425bb6fc3bda..bf1bf8c7c332 100644
@@ -53,7 +53,13 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep)
 {
-	flush_tlb_page(vma, addr & huge_page_mask(hstate_vma(vma)));
+	/*
+	 * clear the huge pte entry firstly, so that the other smp threads will
+	 * not get old pte entry after finishing flush_tlb_page and before
+	 * setting new huge pte entry
+	 */
+	huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+	flush_tlb_page(vma, addr);
 }
 
 #define __HAVE_ARCH_HUGE_PTE_NONE
Signature · 1 line
2.30.2
author maintainer
#14 lore raw

PATCH 14/122 drm/virtio: Fix double free on probe failure

In reply to Greg Kroah-Hartman

From: Xie Yongji <[email protected]>

[ Upstream commit cec7f1774605a5ef47c134af62afe7c75c30b0ee ]

The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure. But such failure will be caught by virtio_gpu_probe() and then virtio_gpu_release() will be called to do some cleanup which will free vgdev and vgdev->vbufs again. So let's set dev->dev_private to NULL to avoid double free.

---
 drivers/gpu/drm/virtio/virtgpu_kms.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/virtio/virtgpu_kms.c +1 -0
index 6dcc05ab31eb..4f855b242dfd 100644
@@ -218,6 +218,7 @@ err_ttm:
 err_vbufs:
 	vgdev->vdev->config->del_vqs(vgdev->vdev);
 err_vqs:
+	dev->dev_private = NULL;
 	kfree(vgdev);
 	return ret;
 }
Signature · 1 line
2.30.2
author maintainer
#8 lore raw

PATCH 8/122 atm: iphase: fix possible use-after-free in ia_module_exit()

In reply to Greg Kroah-Hartman

From: Zou Wei <[email protected]>

[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]

This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

---
 drivers/atm/iphase.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/iphase.c +1 -1
index 8c7a996d1f16..46990352b5d3 100644
@@ -3295,7 +3295,7 @@ static void __exit ia_module_exit(void)
 {
 	pci_unregister_driver(&ia_driver);
 
-        del_timer(&ia_timer);
+	del_timer_sync(&ia_timer);
 }
 
 module_init(ia_module_init);
Signature · 1 line
2.30.2
author maintainer
#9 lore raw

PATCH 9/122 mISDN: fix possible use-after-free in HFC_cleanup()

In reply to Greg Kroah-Hartman

From: Zou Wei <[email protected]>

[ Upstream commit 009fc857c5f6fda81f2f7dd851b2d54193a8e733 ]

This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

---
 drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/isdn/hardware/mISDN/hfcpci.c +1 -1
index 2330a7d24267..a2b2ce1dfec8 100644
@@ -2341,7 +2341,7 @@ static void __exit
 HFC_cleanup(void)
 {
 	if (timer_pending(&hfc_tl))
-		del_timer(&hfc_tl);
+		del_timer_sync(&hfc_tl);
 
 	pci_unregister_driver(&hfc_driver);
 }
Signature · 1 line
2.30.2

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.4.133-rc1 review

This is the start of the stable review cycle for the 5.4.133 release. There are 122 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 17 Jul 2021 18:21:07 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.133-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.133-rc1

Tetsuo Handa <[email protected]>
smackfs: restrict bytes count in smk_set_cipso()

Pavel Skripkin <[email protected]>
jfs: fix GPF in diFree

Zou Wei <[email protected]>
pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()

Benjamin Drung <[email protected]>
media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K

Johan Hovold <[email protected]>
media: rtl28xxu: fix zero-length control request

Johan Hovold <[email protected]>
media: gspca/sunplus: fix zero-length control requests

Johan Hovold <[email protected]>
media: gspca/sq905: fix control-request direction

Pavel Skripkin <[email protected]>
media: zr364xx: fix memory leak in zr364xx_start_readpipe

Johan Hovold <[email protected]>
media: dtv5100: fix control-request directions

Arnd Bergmann <[email protected]>
media: subdev: disallow ioctl for saa6588/davinci

Pali Rohár <[email protected]>
PCI: aardvark: Implement workaround for the readback value of VEND_ID

Pali Rohár <[email protected]>
PCI: aardvark: Fix checking for PIO Non-posted Request

Konstantin Kharlamov <[email protected]>
PCI: Leave Apple Thunderbolt controllers on for s2idle or standby

Hou Tao <[email protected]>
dm btree remove: assign new_root only when removal succeeds

Sai Prakash Ranjan <[email protected]>
coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer()

Lv Yunlong <[email protected]>
ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe

Paul Burton <[email protected]>
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT

Paul Burton <[email protected]>
tracing: Simplify & fix saved_tgids logic

Jan Kara <[email protected]>
rq-qos: fix missed wake-ups in rq_qos_throttle try two

Yun Zhou <[email protected]>
seq_buf: Fix overflow in seq_buf_putmem_hex()

Ferry Toth <[email protected]>
extcon: intel-mrfld: Sync hardware and software state on init

Christophe JAILLET <[email protected]>
nvmem: core: add a missing of_node_put

Linus Walleij <[email protected]>
power: supply: ab8500: Fix an old bug

Zhihao Cheng <[email protected]>
ubifs: Fix races between xattr_{set|get} and listxattr operations

Srinivas Pandruvada <[email protected]>

    thermal/drivers/int340x/processor_thermal: Fix tcc setting

Varad Gautam <[email protected]>
xfrm: policy: Read seqcount outside of rcu-read side in xfrm_policy_lookup_bytype

Petr Pavlu <[email protected]>
ipmi/watchdog: Stop watchdog timer when the current action is 'none'

Nathan Chancellor <[email protected]>
qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute

Dmitry Osipenko <[email protected]>
ASoC: tegra: Set driver_name=tegra for all machine drivers

Gao Xiang <[email protected]>
MIPS: fix "mipsel-linux-ld: decompress.c:undefined reference to `memmove'"

Russ Weight <[email protected]>
fpga: stratix10-soc: Add missing fpga_mgr_free() call

Samuel Holland <[email protected]>
clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround

Thomas Gleixner <[email protected]>
cpu/hotplug: Cure the cpusets trainwreck

Timo Sigurdsson <[email protected]>
ata: ahci_sunxi: Disable DIPM

Christian Löhle <[email protected]>
mmc: core: Allow UHS-I voltage switch for SDSC cards if supported

Wolfram Sang <[email protected]>
mmc: core: clear flags before allowing to retune

Al Cooper <[email protected]>
mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode

Daniel Vetter <[email protected]>
drm/arm/malidp: Always list modifiers

Daniel Vetter <[email protected]>
drm/msm/mdp4: Fix modifier support enabling

Daniel Vetter <[email protected]>
drm/tegra: Don't set allow_fb_modifiers explicitly

Harry Wentland <[email protected]>
drm/amd/display: Reject non-zero src_y and src_x for video planes

Maximilian Luz <[email protected]>
pinctrl/amd: Add device HID for new AMD GPIO controller

Guchun Chen <[email protected]>
drm/amd/display: fix incorrrect valid irq check

Thomas Hebb <[email protected]>
drm/rockchip: dsi: remove extra component_del() call

Jing Xiangfeng <[email protected]>
drm/radeon: Add the missed drm_gem_object_put() in radeon_user_framebuffer_create()

Joseph Greathouse <[email protected]>
drm/amdgpu: Update NV SIMD-per-CU to 2

Nathan Chancellor <[email protected]>
powerpc/barrier: Avoid collision with clang's __lwsync macro

Christophe Leroy <[email protected]>
powerpc/mm: Fix lockup on kernel exec fault

Ian Rogers <[email protected]>
perf bench: Fix 2 memory sanitizer warnings

Joerg Roedel <[email protected]>
crypto: ccp - Annotate SEV Firmware file names

Eric Biggers <[email protected]>
fscrypt: don't ignore minor_hash when hash is 0

Nick Desaulniers <[email protected]>
MIPS: set mips32r5 for virt extensions

zhanglianjie <[email protected]>
MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops

Marcelo Ricardo Leitner <[email protected]>
sctp: add size validation when walking chunks

Marcelo Ricardo Leitner <[email protected]>
sctp: validate from_addr_param return

Tim Jiang <[email protected]>
Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.

Kai-Heng Feng <[email protected]>
Bluetooth: Shutdown controller after workqueues are flushed or cancelled

Yu Liu <[email protected]>
Bluetooth: Fix the HCI to MGMT status conversion table

mark-yw.chen <[email protected]>
Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.

Gerd Rausch <[email protected]>
RDMA/cma: Fix rdma_resolve_route() memory leak

Jakub Kicinski <[email protected]>
net: ip: avoid OOM kills with large UDP sends over loopback

Sean Young <[email protected]>
media, bpf: Do not copy more entries than user space requested

Gustavo A. R. Silva <[email protected]>
wireless: wext-spy: Fix out-of-bounds warning

Íñigo Huguet <[email protected]>
sfc: error code if SRIOV cannot be disabled

Íñigo Huguet <[email protected]>
sfc: avoid double pci_remove of VFs

Johannes Berg <[email protected]>
iwlwifi: pcie: fix context info freeing

Johannes Berg <[email protected]>
iwlwifi: pcie: free IML DMA memory allocation

Johannes Berg <[email protected]>
iwlwifi: mvm: don't change band on bound PHY contexts

Xiao Yang <[email protected]>
RDMA/rxe: Don't overwrite errno from ib_umem_get()

Longpeng(Mike) <[email protected]>
vsock: notify server to shutdown when client has pending signal

Zheyu Ma <[email protected]>
atm: nicstar: register the interrupt handler in the right place

Zheyu Ma <[email protected]>
atm: nicstar: use 'dma_free_coherent' instead of 'kfree'

Huang Pei <[email protected]>
MIPS: add PMD table accounting into MIPS'pmd_alloc_one

Pascal Terjan <[email protected]>
rtl8xxxu: Fix device info for RTL8192EU devices

xinhui pan <[email protected]>
drm/amdkfd: Walk through list with dqm lock hold

Yang Yingliang <[email protected]>
net: sched: fix error return code in tcf_del_walker()

Jian Shen <[email protected]>
net: fix mistake path for netdev_features_strings

Felix Fietkau <[email protected]>
mt76: mt7615: fix fixed-rate tx status reporting

Daniel Borkmann <[email protected]>
bpf: Fix up register-based shifts in interpreter to silence KUBSAN

Zou Wei <[email protected]>
cw1200: add missing MODULE_DEVICE_TABLE

Lee Gibson <[email protected]>
wl1251: Fix possible buffer overflow in wl1251_cmd_scan

Tony Lindgren <[email protected]>
wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

Steffen Klassert <[email protected]>
xfrm: Fix error reporting in xfrm_state_construct.

Mark Yacoub <[email protected]>
drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_check

Heiner Kallweit <[email protected]>
r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM

Minchan Kim <[email protected]>
selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC

Yang Yingliang <[email protected]>
fjes: check return value after calling platform_get_resource()

Nirmoy Das <[email protected]>
drm/amdkfd: use allowed domain for vmbo validation

Wesley Chalmers <[email protected]>
drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7

Vladimir Stempen <[email protected]>
drm/amd/display: Release MST resources on switch from MST to SST

Roman Li <[email protected]>
drm/amd/display: Update scaling settings on modeset

Yang Yingliang <[email protected]>
net: moxa: Use devm_platform_get_and_ioremap_resource()

Yang Yingliang <[email protected]>
net: micrel: check return value after calling platform_get_resource()

Yang Yingliang <[email protected]>
net: mvpp2: check return value after calling platform_get_resource()

Yang Yingliang <[email protected]>
net: bcmgenet: check return value after calling platform_get_resource()

Xianting Tian <[email protected]>
virtio_net: Remove BUG() to avoid machine dead

Liwei Song <[email protected]>
ice: set the value of global config lock timeout longer

Radim Pavlik <[email protected]>
pinctrl: mcp23s08: fix race condition in irq handler

Joe Thornber <[email protected]>
dm space maps: don't reset space map allocation cursor when committing

Jiapeng Chong <[email protected]>
RDMA/cxgb4: Fix missing error code in create_qp()

Willy Tarreau <[email protected]>
ipv6: use prandom_u32() for ID generation

Dmitry Osipenko <[email protected]>
clk: tegra: Ensure that PLLU configuration is applied properly

Kuninori Morimoto <[email protected]>

    clk: renesas: r8a77995: Add ZA2 clock

Zou Wei <[email protected]>
drm/bridge: cdns: Fix PM reference leak in cdns_dsi_transfer()

Jesse Brandeburg <[email protected]>
igb: handle vlan types with checker enabled

Jesse Brandeburg <[email protected]>
e100: handle eeprom as little endian

Arturo Giusti <[email protected]>
udf: Fix NULL pointer dereference in udf_symlink function

Andrey Grodzovsky <[email protected]>
drm/sched: Avoid data corruptions

Xie Yongji <[email protected]>
drm/virtio: Fix double free on probe failure

Pavel Skripkin <[email protected]>
reiserfs: add check for invalid 1st journal block

Wang Li <[email protected]>
drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()

Sebastian Andrzej Siewior <[email protected]>
net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT

Zou Wei <[email protected]>
atm: nicstar: Fix possible use-after-free in nicstar_cleanup()

Zou Wei <[email protected]>
mISDN: fix possible use-after-free in HFC_cleanup()

Zou Wei <[email protected]>
atm: iphase: fix possible use-after-free in ia_module_exit()

Bibo Mao <[email protected]>
hugetlb: clear huge pte during flush function on mips platform

Dmytro Laktyushkin <[email protected]>
drm/amd/display: fix use_max_lb flag for 420 pixel formats

Andy Shevchenko <[email protected]>
net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()

Dan Carpenter <[email protected]>
drm/vc4: fix argument ordering in vc4_crtc_get_margins()

Jack Zhang <[email protected]>
drm/amd/amdgpu/sriov disable all ip hw status by default

Thomas Zimmermann <[email protected]>
drm/zte: Don't select DRM_KMS_FB_HELPER

Thomas Zimmermann <[email protected]>
drm/mxsfb: Don't select DRM_KMS_FB_HELPER

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/mips/boot/compressed/string.c                 | 17 ++++
 arch/mips/include/asm/hugetlb.h                    |  8 +-
 arch/mips/include/asm/mipsregs.h                   |  8 +-
 arch/mips/include/asm/pgalloc.h                    | 10 ++-
 arch/mips/loongson64/loongson-3/numa.c             |  3 +
 arch/powerpc/include/asm/barrier.h                 |  2 +
 arch/powerpc/mm/fault.c                            |  4 +-
 block/blk-rq-qos.c                                 |  4 +-
 drivers/ata/ahci_sunxi.c                           |  2 +-
 drivers/atm/iphase.c                               |  2 +-
 drivers/atm/nicstar.c                              | 26 ++++---
 drivers/bluetooth/btusb.c                          | 15 ++--
 drivers/char/ipmi/ipmi_watchdog.c                  | 22 +++---
 drivers/clk/renesas/r8a77995-cpg-mssr.c            |  1 +
 drivers/clk/tegra/clk-pll.c                        |  9 +--
 drivers/clocksource/arm_arch_timer.c               |  2 +-
 drivers/crypto/ccp/psp-dev.c                       |  4 +
 drivers/extcon/extcon-intel-mrfld.c                |  9 +++
 drivers/firmware/qemu_fw_cfg.c                     |  8 +-
 drivers/fpga/stratix10-soc.c                       |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c   | 21 +----
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  2 +-
 .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c  | 22 +++---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 24 +++++-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h  |  1 +
 .../drm/amd/display/amdgpu_dm/amdgpu_dm_color.c    | 41 ++++++++--
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |  2 +
 .../gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c  |  9 ++-
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |  2 +-
 drivers/gpu/drm/amd/display/dc/irq_types.h         |  2 +-
 drivers/gpu/drm/amd/include/navi10_enum.h          |  2 +-
 drivers/gpu/drm/arm/malidp_planes.c                |  9 ++-
 drivers/gpu/drm/bridge/cdns-dsi.c                  |  2 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c            |  2 +-
 drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c           |  2 -
 drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c         |  8 +-
 drivers/gpu/drm/mxsfb/Kconfig                      |  1 -
 drivers/gpu/drm/radeon/radeon_display.c            |  1 +
 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c    |  4 -
 drivers/gpu/drm/scheduler/sched_entity.c           |  5 ++
 drivers/gpu/drm/tegra/dc.c                         | 10 ++-
 drivers/gpu/drm/tegra/drm.c                        |  2 -
 drivers/gpu/drm/vc4/vc4_drv.h                      |  2 +-
 drivers/gpu/drm/virtio/virtgpu_kms.c               |  1 +
 drivers/gpu/drm/zte/Kconfig                        |  1 -
 drivers/hwtracing/coresight/coresight-tmc-etf.c    |  2 +-
 drivers/infiniband/core/cma.c                      |  3 +-
 drivers/infiniband/hw/cxgb4/qp.c                   |  1 +
 drivers/infiniband/sw/rxe/rxe_mr.c                 |  2 +-
 drivers/ipack/carriers/tpci200.c                   |  5 +-
 drivers/isdn/hardware/mISDN/hfcpci.c               |  2 +-
 drivers/md/persistent-data/dm-btree-remove.c       |  3 +-
 drivers/md/persistent-data/dm-space-map-disk.c     |  9 ++-
 drivers/md/persistent-data/dm-space-map-metadata.c |  9 ++-
 drivers/media/i2c/saa6588.c                        |  4 +-
 drivers/media/pci/bt8xx/bttv-driver.c              |  6 +-
 drivers/media/pci/saa7134/saa7134-video.c          |  6 +-
 drivers/media/platform/davinci/vpbe_display.c      |  2 +-
 drivers/media/platform/davinci/vpbe_venc.c         |  6 +-
 drivers/media/rc/bpf-lirc.c                        |  3 +-
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c            |  3 +-
 drivers/media/usb/dvb-usb/dtv5100.c                |  7 +-
 drivers/media/usb/gspca/sq905.c                    |  2 +-
 drivers/media/usb/gspca/sunplus.c                  |  8 +-
 drivers/media/usb/uvc/uvc_video.c                  | 27 +++++++
 drivers/media/usb/zr364xx/zr364xx.c                |  1 +
 drivers/mmc/core/core.c                            |  7 +-
 drivers/mmc/core/sd.c                              | 10 ++-
 drivers/mmc/host/sdhci.c                           |  4 +
 drivers/mmc/host/sdhci.h                           |  1 +
 drivers/net/ethernet/broadcom/genet/bcmmii.c       |  4 +
 drivers/net/ethernet/intel/e100.c                  | 12 +--
 drivers/net/ethernet/intel/ice/ice_type.h          |  2 +-
 drivers/net/ethernet/intel/igb/igb_main.c          |  5 +-
 drivers/net/ethernet/intel/igbvf/netdev.c          |  4 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |  4 +
 drivers/net/ethernet/micrel/ks8842.c               |  4 +
 drivers/net/ethernet/moxa/moxart_ether.c           |  5 +-
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 19 ++---
 drivers/net/ethernet/realtek/r8169_main.c          |  1 -
 drivers/net/ethernet/sfc/ef10_sriov.c              | 25 +++---
 drivers/net/fjes/fjes_main.c                       |  4 +
 drivers/net/virtio_net.c                           |  2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  | 24 ++++--
 .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c   | 15 ++--
 drivers/net/wireless/intel/iwlwifi/pcie/internal.h |  3 +
 .../net/wireless/intel/iwlwifi/pcie/trans-gen2.c   |  3 +-
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c    | 10 +--
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h   | 11 +--
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 59 ++++++++++++--
 drivers/net/wireless/st/cw1200/cw1200_sdio.c       |  1 +
 drivers/net/wireless/ti/wl1251/cmd.c               |  9 ++-
 drivers/net/wireless/ti/wl12xx/main.c              |  7 ++
 drivers/nvmem/core.c                               |  9 ++-
 drivers/pci/controller/pci-aardvark.c              | 13 +++-
 drivers/pci/quirks.c                               | 11 +++
 drivers/pinctrl/pinctrl-amd.c                      |  1 +
 drivers/pinctrl/pinctrl-mcp23s08.c                 | 10 +--
 .../int340x_thermal/processor_thermal_device.c     | 20 +++--
 fs/crypto/fname.c                                  |  9 +--
 fs/jfs/inode.c                                     |  3 +-
 fs/reiserfs/journal.c                              | 14 ++++
 fs/ubifs/super.c                                   |  1 +
 fs/ubifs/ubifs.h                                   |  2 +
 fs/ubifs/xattr.c                                   | 44 ++++++++---
 fs/udf/namei.c                                     |  4 +
 include/linux/mfd/abx500/ux500_chargalg.h          |  2 +-
 include/linux/netdev_features.h                    |  2 +-
 include/linux/wait.h                               |  2 +-
 include/media/v4l2-subdev.h                        |  4 +
 include/net/sctp/structs.h                         |  2 +-
 include/uapi/linux/ethtool.h                       |  4 +-
 kernel/bpf/core.c                                  | 61 ++++++++++-----
 kernel/cpu.c                                       | 49 ++++++++++++
 kernel/sched/wait.c                                |  9 ++-
 kernel/trace/trace.c                               | 91 +++++++++++++---------
 lib/seq_buf.c                                      |  4 +-
 net/bluetooth/hci_core.c                           | 16 ++--
 net/bluetooth/mgmt.c                               |  3 +
 net/core/dev.c                                     | 11 ++-
 net/ipv4/ip_output.c                               | 32 ++++----
 net/ipv6/ip6_output.c                              | 32 ++++----
 net/ipv6/output_core.c                             | 28 ++-----
 net/sched/act_api.c                                |  3 +-
 net/sctp/bind_addr.c                               | 19 +++--
 net/sctp/input.c                                   |  8 +-
 net/sctp/ipv6.c                                    |  7 +-
 net/sctp/protocol.c                                |  7 +-
 net/sctp/sm_make_chunk.c                           | 29 +++----
 net/vmw_vsock/af_vsock.c                           |  2 +-
 net/wireless/wext-spy.c                            | 14 ++--
 net/xfrm/xfrm_policy.c                             | 21 +++--
 net/xfrm/xfrm_user.c                               | 28 +++----
 security/selinux/avc.c                             | 13 ++--
 security/smack/smackfs.c                           |  2 +
 sound/soc/tegra/tegra_alc5632.c                    |  1 +
 sound/soc/tegra/tegra_max98090.c                   |  1 +
 sound/soc/tegra/tegra_rt5640.c                     |  1 +
 sound/soc/tegra/tegra_rt5677.c                     |  1 +
 sound/soc/tegra/tegra_sgtl5000.c                   |  1 +
 sound/soc/tegra/tegra_wm8753.c                     |  1 +
 sound/soc/tegra/tegra_wm8903.c                     |  1 +
 sound/soc/tegra/tegra_wm9712.c                     |  1 +
 sound/soc/tegra/trimslice.c                        |  1 +
 tools/perf/bench/sched-messaging.c                 |  4 +-
 146 files changed, 914 insertions(+), 450 deletions(-)
author maintainer
#25 lore raw

PATCH 25/122 pinctrl: mcp23s08: fix race condition in irq handler

From: Radim Pavlik <[email protected]>

[ Upstream commit 897120d41e7afd9da435cb00041a142aeeb53c07 ]

Checking value of MCP_INTF in mcp23s08_irq suggests that the handler may be called even when there is no interrupt pending.

But the actual interrupt could happened between reading MCP_INTF and MCP_GPIO. In this situation we got nothing from MCP_INTF, but the event gets acknowledged on the expander by reading MCP_GPIO. This leads to losing events.

Fix the problem by not reading any register until we see something in MCP_INTF.

The error was reproduced and fix tested on MCP23017.

---
 drivers/pinctrl/pinctrl-mcp23s08.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/pinctrl/pinctrl-mcp23s08.c +5 -5
index d8bcbefcba89..9d5e2d9b6b93 100644
@@ -459,6 +459,11 @@ static irqreturn_t mcp23s08_irq(int irq, void *data)
 	if (mcp_read(mcp, MCP_INTF, &intf))
 		goto unlock;
 
+	if (intf == 0) {
+		/* There is no interrupt pending */
+		return IRQ_HANDLED;
+	}
+
 	if (mcp_read(mcp, MCP_INTCAP, &intcap))
 		goto unlock;
 
@@ -476,11 +481,6 @@ static irqreturn_t mcp23s08_irq(int irq, void *data)
 	mcp->cached_gpio = gpio;
 	mutex_unlock(&mcp->lock);
 
-	if (intf == 0) {
-		/* There is no interrupt pending */
-		return IRQ_HANDLED;
-	}
-
 	dev_dbg(mcp->chip.parent,
 		"intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n",
 		intcap, intf, gpio_orig, gpio);
Signature · 1 line
2.30.2
author maintainer
#37 lore raw

PATCH 34/122 drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7

In reply to Greg Kroah-Hartman

From: Wesley Chalmers <[email protected]>

[ Upstream commit 3577e1678772ce3ede92af3a75b44a4b76f9b4ad ]

[WHY]
DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.

---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +1 -1
index 083c42e521f5..03a2e1d7f067 100644
@@ -126,7 +126,7 @@ void dcn20_dccg_init(struct dce_hwseq *hws)
 	REG_WRITE(MILLISECOND_TIME_BASE_DIV, 0x1186a0);
 
 	/* This value is dependent on the hardware pipeline delay so set once per SOC */
-	REG_WRITE(DISPCLK_FREQ_CHANGE_CNTL, 0x801003c);
+	REG_WRITE(DISPCLK_FREQ_CHANGE_CNTL, 0xe01003c);
 }
 void dcn20_display_init(struct dc *dc)
 {
Signature · 1 line
2.30.2
author maintainer
#38 lore raw

PATCH 35/122 drm/amdkfd: use allowed domain for vmbo validation

In reply to Greg Kroah-Hartman

From: Nirmoy Das <[email protected]>

[ Upstream commit bc05716d4fdd065013633602c5960a2bf1511b9c ]

Fixes handling when page tables are in system memory.

v3: remove struct amdgpu_vm_parser.
v2: remove unwanted variable.
change amdgpu_amdkfd_validate instead of amdgpu_amdkfd_bo_validate.

---
 .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c  | 21 ++++---------------
 1 file changed, 4 insertions(+), 17 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +4 -17
index f3fa271e3394..25af45adc03e 100644
@@ -55,12 +55,6 @@ static struct {
 	spinlock_t mem_limit_lock;
 } kfd_mem_limit;
 
-/* Struct used for amdgpu_amdkfd_bo_validate */
-struct amdgpu_vm_parser {
-	uint32_t        domain;
-	bool            wait;
-};
-
 static const char * const domain_bit_to_string[] = {
 		"CPU",
 		"GTT",
@@ -293,11 +287,9 @@ validate_fail:
 	return ret;
 }
 
-static int amdgpu_amdkfd_validate(void *param, struct amdgpu_bo *bo)
+static int amdgpu_amdkfd_validate_vm_bo(void *_unused, struct amdgpu_bo *bo)
 {
-	struct amdgpu_vm_parser *p = param;
-
-	return amdgpu_amdkfd_bo_validate(bo, p->domain, p->wait);
+	return amdgpu_amdkfd_bo_validate(bo, bo->allowed_domains, false);
 }
 
 /* vm_validate_pt_pd_bos - Validate page table and directory BOs
@@ -311,20 +303,15 @@ static int vm_validate_pt_pd_bos(struct amdgpu_vm *vm)
 {
 	struct amdgpu_bo *pd = vm->root.base.bo;
 	struct amdgpu_device *adev = amdgpu_ttm_adev(pd->tbo.bdev);
-	struct amdgpu_vm_parser param;
 	int ret;
 
-	param.domain = AMDGPU_GEM_DOMAIN_VRAM;
-	param.wait = false;
-
-	ret = amdgpu_vm_validate_pt_bos(adev, vm, amdgpu_amdkfd_validate,
-					&param);
+	ret = amdgpu_vm_validate_pt_bos(adev, vm, amdgpu_amdkfd_validate_vm_bo, NULL);
 	if (ret) {
 		pr_err("amdgpu: failed to validate PT BOs\n");
 		return ret;
 	}
 
-	ret = amdgpu_amdkfd_validate(&param, pd);
+	ret = amdgpu_amdkfd_validate_vm_bo(NULL, pd);
 	if (ret) {
 		pr_err("amdgpu: failed to validate PD\n");
 		return ret;
Signature · 1 line
2.30.2
author maintainer
#39 lore raw

PATCH 36/122 fjes: check return value after calling platform_get_resource()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit f18c11812c949553d2b2481ecaa274dd51bed1e7 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

---
 drivers/net/fjes/fjes_main.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/fjes/fjes_main.c +4 -0
index 91a1059517f5..b89b4a3800a4 100644
@@ -1262,6 +1262,10 @@ static int fjes_probe(struct platform_device *plat_dev)
 	adapter->interrupt_watch_enable = false;
 
 	res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -EINVAL;
+		goto err_free_control_wq;
+	}
 	hw->hw_res.start = res->start;
 	hw->hw_res.size = resource_size(res);
 	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
Signature · 1 line
2.30.2
author maintainer
#43 lore raw

PATCH 40/122 xfrm: Fix error reporting in xfrm_state_construct.

In reply to Greg Kroah-Hartman

From: Steffen Klassert <[email protected]>

[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ]

When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails, the error will not be reported because the -ENOMEM assignment to the err variable is overwritten before. Fix this by moving these two in front of the function so that memory allocation failures will be reported.

---
 net/xfrm/xfrm_user.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
net/xfrm/xfrm_user.c +14 -14
index fbb7d9d06478..0cee2d3c6e45 100644
@@ -580,6 +580,20 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 
 	copy_from_user_state(x, p);
 
+	if (attrs[XFRMA_ENCAP]) {
+		x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
+				   sizeof(*x->encap), GFP_KERNEL);
+		if (x->encap == NULL)
+			goto error;
+	}
+
+	if (attrs[XFRMA_COADDR]) {
+		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
+				    sizeof(*x->coaddr), GFP_KERNEL);
+		if (x->coaddr == NULL)
+			goto error;
+	}
+
 	if (attrs[XFRMA_SA_EXTRA_FLAGS])
 		x->props.extra_flags = nla_get_u32(attrs[XFRMA_SA_EXTRA_FLAGS]);
 
@@ -600,23 +614,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 				   attrs[XFRMA_ALG_COMP])))
 		goto error;
 
-	if (attrs[XFRMA_ENCAP]) {
-		x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
-				   sizeof(*x->encap), GFP_KERNEL);
-		if (x->encap == NULL)
-			goto error;
-	}
-
 	if (attrs[XFRMA_TFCPAD])
 		x->tfcpad = nla_get_u32(attrs[XFRMA_TFCPAD]);
 
-	if (attrs[XFRMA_COADDR]) {
-		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
-				    sizeof(*x->coaddr), GFP_KERNEL);
-		if (x->coaddr == NULL)
-			goto error;
-	}
-
 	xfrm_mark_get(attrs, &x->mark);
 
 	xfrm_smark_init(attrs, &x->props.smark);
Signature · 1 line
2.30.2
author maintainer
#42 lore raw

PATCH 39/122 drm/amd/display: Verify Gamma & Degamma LUT sizes in amdgpu_dm_atomic_check

In reply to Greg Kroah-Hartman

From: Mark Yacoub <[email protected]>

[ Upstream commit 03fc4cf45d30533d54f0f4ebc02aacfa12f52ce2 ]

For each CRTC state, check the size of Gamma and Degamma LUTs so unexpected and larger sizes wouldn't slip through.

TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes

v2: fix assignments in if clauses, Mark's email.

---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  4 ++
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |  1 +
 .../amd/display/amdgpu_dm/amdgpu_dm_color.c   | 41 ++++++++++++++++---
 3 files changed, 40 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +4 -0
index fca466d4806b..11da904fcb7e 100644
@@ -7407,6 +7407,10 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 		    old_crtc_state->vrr_enabled == new_crtc_state->vrr_enabled)
 			continue;
 
+		ret = amdgpu_dm_verify_lut_sizes(new_crtc_state);
+		if (ret)
+			goto fail;
+
 		if (!new_crtc_state->enable)
 			continue;
 
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +1 -0
index c8c525a2b505..54163c970e7a 100644
@@ -387,6 +387,7 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector,
 #define MAX_COLOR_LEGACY_LUT_ENTRIES 256
 
 void amdgpu_dm_init_color_mod(void);
+int amdgpu_dm_verify_lut_sizes(const struct drm_crtc_state *crtc_state);
 int amdgpu_dm_update_crtc_color_mgmt(struct dm_crtc_state *crtc);
 int amdgpu_dm_update_plane_color_mgmt(struct dm_crtc_state *crtc,
 				      struct dc_plane_state *dc_plane_state);
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c +35 -6

55 lines not on this page · raw message

Signature · 1 line
2.30.2
author maintainer
#41 lore raw

PATCH 38/122 r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM

In reply to Greg Kroah-Hartman

From: Heiner Kallweit <[email protected]>

[ Upstream commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207 ]

It has been reported that on RTL8106e the link-up interrupt may be significantly delayed if the user enables ASPM L1. Per default ASPM is disabled. The change leaves L1 enabled on the PCIe link (thus still allowing to reach higher package power saving states), but the NIC won't actively trigger it.

---
 drivers/net/ethernet/realtek/r8169_main.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/ethernet/realtek/r8169_main.c +0 -1
index 661202e85412..5969f64169e5 100644
@@ -5190,7 +5190,6 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp)
 	RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) & ~PFM_EN);
 
 	rtl_pcie_state_l2l3_disable(tp);
-	rtl_hw_aspm_clkreq_enable(tp, true);
 }
 
 DECLARE_RTL_COND(rtl_mac_ocp_e00e_cond)
Signature · 1 line
2.30.2
author maintainer
#44 lore raw

PATCH 41/122 wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]

At least on wl12xx, reading the MAC after boot can fail with a warning at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read. The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls after request_firmware_work_func().

After the error, no wireless interface is created. Reloading the wl12xx module makes the interface work.

Turns out the wlan controller can be in a low-power ELP state after the boot from the bootloader or kexec, and needs to be woken up first.

Let's wake the hardware and add a sleep after that similar to wl12xx_pre_boot() is already doing.

Note that a similar issue could exist for wl18xx, but I have not seen it so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not produce similar errors.

---
 drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/net/wireless/ti/wl12xx/main.c +7 -0
index 9d7dbfe7fe0c..c6da0cfb4afb 100644
@@ -1503,6 +1503,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 	u32 mac1, mac2;
 	int ret;
 
+	/* Device may be in ELP from the bootloader or kexec */
+	ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	if (ret < 0)
+		goto out;
+
+	usleep_range(500000, 700000);
+
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
 	if (ret < 0)
 		goto out;
Signature · 1 line
2.30.2
author maintainer
#40 lore raw

PATCH 37/122 selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC

In reply to Greg Kroah-Hartman

From: Minchan Kim <[email protected]>

[ Upstream commit 648f2c6100cfa18e7dfe43bc0b9c3b73560d623c ]

In the field, we have seen lots of allocation failure from the call path below.

06-03 13:29:12.999 1010315 31557 31557 W Binder : 31542_2: page allocation failure: order:0, mode:0x800(GFP_NOWAIT), nodemask=(null),cpuset=background,mems_allowed=0
...
...
06-03 13:29:12.999 1010315 31557 31557 W Call trace:

06-03 13:29:12.999 1010315 31557 31557 W         : dump_backtrace.cfi_jt+0x0/0x8
06-03 13:29:12.999 1010315 31557 31557 W         : dump_stack+0xc8/0x14c
06-03 13:29:12.999 1010315 31557 31557 W         : warn_alloc+0x158/0x1c8
06-03 13:29:12.999 1010315 31557 31557 W         : __alloc_pages_slowpath+0x9d8/0xb80
06-03 13:29:12.999 1010315 31557 31557 W         : __alloc_pages_nodemask+0x1c4/0x430
06-03 13:29:12.999 1010315 31557 31557 W         : allocate_slab+0xb4/0x390
06-03 13:29:12.999 1010315 31557 31557 W         : ___slab_alloc+0x12c/0x3a4
06-03 13:29:12.999 1010315 31557 31557 W         : kmem_cache_alloc+0x358/0x5e4
06-03 13:29:12.999 1010315 31557 31557 W         : avc_alloc_node+0x30/0x184
06-03 13:29:12.999 1010315 31557 31557 W         : avc_update_node+0x54/0x4f0
06-03 13:29:12.999 1010315 31557 31557 W         : avc_has_extended_perms+0x1a4/0x460
06-03 13:29:12.999 1010315 31557 31557 W         : selinux_file_ioctl+0x320/0x3d0
06-03 13:29:12.999 1010315 31557 31557 W         : __arm64_sys_ioctl+0xec/0x1fc
06-03 13:29:12.999 1010315 31557 31557 W         : el0_svc_common+0xc0/0x24c
06-03 13:29:12.999 1010315 31557 31557 W         : el0_svc+0x28/0x88
06-03 13:29:12.999 1010315 31557 31557 W         : el0_sync_handler+0x8c/0xf0
06-03 13:29:12.999 1010315 31557 31557 W         : el0_sync+0x1a4/0x1c0
..
..
06-03 13:29:12.999 1010315 31557 31557 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010315 31557 31557 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010315 31557 31557 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:12.999 1010161 10686 10686 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010161 10686 10686 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010161 10686 10686 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:12.999 1010161 10686 10686 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010161 10686 10686 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010161 10686 10686 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:12.999 1010161 10686 10686 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010161 10686 10686 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010161 10686 10686 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 1010161 10686 10686 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 1010161 10686 10686 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 1010161 10686 10686 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 1010161 10686 10686 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 1010161 10686 10686 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 1010161 10686 10686 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 1010161 10686 10686 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 1010161 10686 10686 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 1010161 10686 10686 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 10230 30892 30892 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 10230 30892 30892 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 10230 30892 30892 W node 0  : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 10230 30892 30892 W SLUB    : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 10230 30892 30892 W cache   : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0

Based on [1], selinux is tolerate for failure of memory allocation. Then, use __GFP_NOWARN together.

[1] 476accbe2f6e ("selinux: use GFP_NOWAIT in the AVC kmem_caches")

[PM: subj fix, line wraps, normalized commit refs]
---
 security/selinux/avc.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
security/selinux/avc.c +7 -6
index d18cb32a242a..4a744b1cebc8 100644
@@ -294,26 +294,27 @@ static struct avc_xperms_decision_node
 	struct avc_xperms_decision_node *xpd_node;
 	struct extended_perms_decision *xpd;
 
-	xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep, GFP_NOWAIT);
+	xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep,
+				     GFP_NOWAIT | __GFP_NOWARN);
 	if (!xpd_node)
 		return NULL;
 
 	xpd = &xpd_node->xpd;
 	if (which & XPERMS_ALLOWED) {
 		xpd->allowed = kmem_cache_zalloc(avc_xperms_data_cachep,
-						GFP_NOWAIT);
+						GFP_NOWAIT | __GFP_NOWARN);
 		if (!xpd->allowed)
 			goto error;
 	}
 	if (which & XPERMS_AUDITALLOW) {
 		xpd->auditallow = kmem_cache_zalloc(avc_xperms_data_cachep,
-						GFP_NOWAIT);
+						GFP_NOWAIT | __GFP_NOWARN);
 		if (!xpd->auditallow)
 			goto error;
 	}
 	if (which & XPERMS_DONTAUDIT) {
 		xpd->dontaudit = kmem_cache_zalloc(avc_xperms_data_cachep,
-						GFP_NOWAIT);
+						GFP_NOWAIT | __GFP_NOWARN);
 		if (!xpd->dontaudit)
 			goto error;
 	}
@@ -341,7 +342,7 @@ static struct avc_xperms_node *avc_xperms_alloc(void)
 {
 	struct avc_xperms_node *xp_node;
 
-	xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT);
+	xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT | __GFP_NOWARN);
 	if (!xp_node)
 		return xp_node;
 	INIT_LIST_HEAD(&xp_node->xpd_head);
@@ -497,7 +498,7 @@ static struct avc_node *avc_alloc_node(struct selinux_avc *avc)
 {
 	struct avc_node *node;
 
-	node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT);
+	node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT | __GFP_NOWARN);
 	if (!node)
 		goto out;
 
Signature · 1 line
2.30.2
author maintainer
#45 lore raw

PATCH 42/122 wl1251: Fix possible buffer overflow in wl1251_cmd_scan

In reply to Greg Kroah-Hartman

From: Lee Gibson <[email protected]>

[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]

Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size.

---
 drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/wireless/ti/wl1251/cmd.c +6 -3
index 9547aea01b0f..ea0215246c5c 100644
@@ -466,9 +466,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 		cmd->channels[i].channel = channels[i]->hw_value;
 	}
 
-	cmd->params.ssid_len = ssid_len;
-	if (ssid)
-		memcpy(cmd->params.ssid, ssid, ssid_len);
+	if (ssid) {
+		int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+		cmd->params.ssid_len = len;
+		memcpy(cmd->params.ssid, ssid, len);
+	}
 
 	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 	if (ret < 0) {
Signature · 1 line
2.30.2
author maintainer
#26 lore raw

PATCH 26/122 ice: set the value of global config lock timeout longer

In reply to Greg Kroah-Hartman

From: Liwei Song <[email protected]>

[ Upstream commit fb3612840d4f587a0af9511a11d7989d1fa48206 ]

It may need hold Global Config Lock a longer time when download DDP package file, extend the timeout value to 5000ms to ensure that download can be finished before other AQ command got time to run, this will fix the issue below when probe the device, 5000ms is a test value that work with both Backplane and BreakoutCable NVM image:

ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12

---
 drivers/net/ethernet/intel/ice/ice_type.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/intel/ice/ice_type.h +1 -1
index 6667d17a4206..0b2e657b96eb 100644
@@ -48,7 +48,7 @@ enum ice_aq_res_ids {
 /* FW update timeout definitions are in milliseconds */
 #define ICE_NVM_TIMEOUT			180000
 #define ICE_CHANGE_LOCK_TIMEOUT		1000
-#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	3000
+#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	5000
 
 enum ice_aq_res_access_type {
 	ICE_RES_READ = 1,
Signature · 1 line
2.30.2
author maintainer
#46 lore raw

PATCH 43/122 cw1200: add missing MODULE_DEVICE_TABLE

In reply to Greg Kroah-Hartman

From: Zou Wei <[email protected]>

[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module.

---
 drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/st/cw1200/cw1200_sdio.c +1 -0
index 43e012073dbf..5ac06d672fc6 100644
@@ -60,6 +60,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = {
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) },
 	{ /* end: all zeroes */			},
 };
+MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);
 
 /* hwbus_ops implemetation */
 
Signature · 1 line
2.30.2
author maintainer
#48 lore raw

PATCH 45/122 mt76: mt7615: fix fixed-rate tx status reporting

In reply to Greg Kroah-Hartman

From: Felix Fietkau <[email protected]>

[ Upstream commit ec8f1a90d006f7cedcf86ef19fd034a406a213d6 ]

Rely on the txs fixed-rate bit instead of info->control.rates

---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7615/mac.c +4 -6
index 111e38ff954a..a6c530b9ceee 100644
@@ -840,22 +840,20 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 	int first_idx = 0, last_idx;
 	int i, idx, count;
 	bool fixed_rate, ack_timeout;
-	bool probe, ampdu, cck = false;
+	bool ampdu, cck = false;
 	bool rs_idx;
 	u32 rate_set_tsf;
 	u32 final_rate, final_rate_flags, final_nss, txs;
 
-	fixed_rate = info->status.rates[0].count;
-	probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
-
 	txs = le32_to_cpu(txs_data[1]);
-	ampdu = !fixed_rate && (txs & MT_TXS1_AMPDU);
+	ampdu = txs & MT_TXS1_AMPDU;
 
 	txs = le32_to_cpu(txs_data[3]);
 	count = FIELD_GET(MT_TXS3_TX_COUNT, txs);
 	last_idx = FIELD_GET(MT_TXS3_LAST_TX_RATE, txs);
 
 	txs = le32_to_cpu(txs_data[0]);
+	fixed_rate = txs & MT_TXS0_FIXED_RATE;
 	final_rate = FIELD_GET(MT_TXS0_TX_RATE, txs);
 	ack_timeout = txs & MT_TXS0_ACK_TIMEOUT;
 
@@ -877,7 +875,7 @@ static bool mt7615_fill_txs(struct mt7615_dev *dev, struct mt7615_sta *sta,
 
 	first_idx = max_t(int, 0, last_idx - (count + 1) / MT7615_RATE_RETRY);
 
-	if (fixed_rate && !probe) {
+	if (fixed_rate) {
 		info->status.rates[0].count = count;
 		i = 0;
 		goto out;
Signature · 1 line
2.30.2
author maintainer
#49 lore raw

PATCH 46/122 net: fix mistake path for netdev_features_strings

In reply to Greg Kroah-Hartman

From: Jian Shen <[email protected]>

[ Upstream commit 2d8ea148e553e1dd4e80a87741abdfb229e2b323 ]

Th_strings arrays netdev_features_strings, tunable_strings, and phy_tunable_strings has been moved to file net/ethtool/common.c. So fixes the comment.

---
 include/linux/netdev_features.h | 2 +-
 include/uapi/linux/ethtool.h    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
include/linux/netdev_features.h +1 -1
index 4b19c544c59a..640e7279f161 100644
@@ -83,7 +83,7 @@ enum {
 
 	/*
 	 * Add your fresh new feature above and remember to update
-	 * netdev_features_strings[] in net/core/ethtool.c and maybe
+	 * netdev_features_strings[] in net/ethtool/common.c and maybe
 	 * some feature mask #defines below. Please also describe it
 	 * in Documentation/networking/netdev-features.txt.
 	 */
include/uapi/linux/ethtool.h +2 -2
index 7857aa413627..8d465e5322e7 100644
@@ -223,7 +223,7 @@ enum tunable_id {
 	ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
 	/*
 	 * Add your fresh new tunable attribute above and remember to update
-	 * tunable_strings[] in net/core/ethtool.c
+	 * tunable_strings[] in net/ethtool/common.c
 	 */
 	__ETHTOOL_TUNABLE_COUNT,
 };
@@ -287,7 +287,7 @@ enum phy_tunable_id {
 	ETHTOOL_PHY_EDPD,
 	/*
 	 * Add your fresh new phy tunable attribute above and remember to update
-	 * phy_tunable_strings[] in net/core/ethtool.c
+	 * phy_tunable_strings[] in net/ethtool/common.c
 	 */
 	__ETHTOOL_PHY_TUNABLE_COUNT,
 };
Signature · 1 line
2.30.2
author maintainer
#50 lore raw

PATCH 47/122 net: sched: fix error return code in tcf_del_walker()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 55d96f72e8ddc0a294e0b9c94016edbb699537e1 ]

When nla_put_u32() fails, 'ret' could be 0, it should return error code in tcf_del_walker().

---
 net/sched/act_api.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/sched/act_api.c +2 -1
index 716cad677318..17e5cd9ebd89 100644
@@ -316,7 +316,8 @@ static int tcf_del_walker(struct tcf_idrinfo *idrinfo, struct sk_buff *skb,
 	}
 	mutex_unlock(&idrinfo->lock);
 
-	if (nla_put_u32(skb, TCA_FCNT, n_i))
+	ret = nla_put_u32(skb, TCA_FCNT, n_i);
+	if (ret)
 		goto nla_put_failure;
 	nla_nest_end(skb, nest);
 
Signature · 1 line
2.30.2
author maintainer
#47 lore raw

PATCH 44/122 bpf: Fix up register-based shifts in interpreter to silence KUBSAN

In reply to Greg Kroah-Hartman

From: Daniel Borkmann <[email protected]>

[ Upstream commit 28131e9d933339a92f78e7ab6429f4aaaa07061c ]

syzbot reported a shift-out-of-bounds that KUBSAN observed in the interpreter:

[...]

  UBSAN: shift-out-of-bounds in kernel/bpf/core.c:1420:2
  shift exponent 255 is too large for 64-bit type 'long long unsigned int'
  CPU: 1 PID: 11097 Comm: syz-executor.4 Not tainted 5.12.0-rc2-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:79 [inline]
   dump_stack+0x141/0x1d7 lib/dump_stack.c:120
   ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
   __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
   ___bpf_prog_run.cold+0x19/0x56c kernel/bpf/core.c:1420
   __bpf_prog_run32+0x8f/0xd0 kernel/bpf/core.c:1735
   bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
   bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
   bpf_prog_run_clear_cb include/linux/filter.h:755 [inline]
   run_filter+0x1a1/0x470 net/packet/af_packet.c:2031
   packet_rcv+0x313/0x13e0 net/packet/af_packet.c:2104
   dev_queue_xmit_nit+0x7c2/0xa90 net/core/dev.c:2387
   xmit_one net/core/dev.c:3588 [inline]
   dev_hard_start_xmit+0xad/0x920 net/core/dev.c:3609
   __dev_queue_xmit+0x2121/0x2e00 net/core/dev.c:4182
   __bpf_tx_skb net/core/filter.c:2116 [inline]
   __bpf_redirect_no_mac net/core/filter.c:2141 [inline]
   __bpf_redirect+0x548/0xc80 net/core/filter.c:2164
   ____bpf_clone_redirect net/core/filter.c:2448 [inline]
   bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2420
   ___bpf_prog_run+0x34e1/0x77d0 kernel/bpf/core.c:1523
   __bpf_prog_run512+0x99/0xe0 kernel/bpf/core.c:1737
   bpf_dispatcher_nop_func include/linux/bpf.h:644 [inline]
   bpf_test_run+0x3ed/0xc50 net/bpf/test_run.c:50
   bpf_prog_test_run_skb+0xabc/0x1c50 net/bpf/test_run.c:582
   bpf_prog_test_run kernel/bpf/syscall.c:3127 [inline]
   __do_sys_bpf+0x1ea9/0x4f00 kernel/bpf/syscall.c:4406
   do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  [...]

Generally speaking, KUBSAN reports from the kernel should be fixed. However, in case of BPF, this particular report caused concerns since the large shift is not wrong from BPF point of view, just undefined. In the verifier, K-based shifts that are >= {64,32} (depending on the bitwidth of the instruction) are already rejected. The register-based cases were not given their content might not be known at verification time. Ideas such as verifier instruction rewrite with an additional AND instruction for the source register were brought up, but regularly rejected due to the additional runtime overhead they incur.

As Edward Cree rightly put it:

Shifts by more than insn bitness are legal in the BPF ISA; they are implementation-defined behaviour [of the underlying architecture], rather than UB, and have been made legal for performance reasons. Each of the JIT backends compiles the BPF shift operations to machine instructions which produce implementation-defined results in such a case; the resulting contents of the register may be arbitrary but program behaviour as a whole remains defined.

Guard checks in the fast path (i.e. affecting JITted code) will thus not be accepted.

The case of division by zero is not truly analogous here, as division instructions on many of the JIT-targeted architectures will raise a machine exception / fault on division by zero, whereas (to the best of my knowledge) none will do so on an out-of-bounds shift.

Given the KUBSAN report only affects the BPF interpreter, but not JITs, one solution is to add the ANDs with 63 or 31 into ___bpf_prog_run(). That would make the shifts defined, and thus shuts up KUBSAN, and the compiler would optimize out the AND on any CPU that interprets the shift amounts modulo the width anyway (e.g., confirmed from disassembly that on x86-64 and arm64 the generated interpreter code is the same before and after this fix).

The BPF interpreter is slow path, and most likely compiled out anyway as distros select BPF_JIT_ALWAYS_ON to avoid speculative execution of BPF instructions by the interpreter. Given the main argument was to avoid sacrificing performance, the fact that the AND is optimized away from compiler for mainstream archs helps as well as a solution moving forward. Also add a comment on LSH/RSH/ARSH translation for JIT authors to provide guidance when they see the ___bpf_prog_run() interpreter code and use it as a model for a new JIT backend.

---
 kernel/bpf/core.c | 61 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 43 insertions(+), 18 deletions(-)
kernel/bpf/core.c +43 -18
index 56bc96f5ad20..323913ba13b3 100644
@@ -1321,29 +1321,54 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 select_insn:
 	goto *jumptable[insn->code];
 
-	/* ALU */
-#define ALU(OPCODE, OP)			\
-	ALU64_##OPCODE##_X:		\
-		DST = DST OP SRC;	\
-		CONT;			\
-	ALU_##OPCODE##_X:		\
-		DST = (u32) DST OP (u32) SRC;	\
-		CONT;			\
-	ALU64_##OPCODE##_K:		\
-		DST = DST OP IMM;		\
-		CONT;			\
-	ALU_##OPCODE##_K:		\
-		DST = (u32) DST OP (u32) IMM;	\
+	/* Explicitly mask the register-based shift amounts with 63 or 31
+	 * to avoid undefined behavior. Normally this won't affect the
+	 * generated code, for example, in case of native 64 bit archs such
+	 * as x86-64 or arm64, the compiler is optimizing the AND away for
+	 * the interpreter. In case of JITs, each of the JIT backends compiles
+	 * the BPF shift operations to machine instructions which produce
+	 * implementation-defined results in such a case; the resulting
+	 * contents of the register may be arbitrary, but program behaviour
+	 * as a whole remains defined. In other words, in case of JIT backends,
+	 * the AND must /not/ be added to the emitted LSH/RSH/ARSH translation.
+	 */
+	/* ALU (shifts) */
+#define SHT(OPCODE, OP)					\
+	ALU64_##OPCODE##_X:				\
+		DST = DST OP (SRC & 63);		\
+		CONT;					\
+	ALU_##OPCODE##_X:				\
+		DST = (u32) DST OP ((u32) SRC & 31);	\
+		CONT;					\
+	ALU64_##OPCODE##_K:				\
+		DST = DST OP IMM;			\
+		CONT;					\
+	ALU_##OPCODE##_K:				\
+		DST = (u32) DST OP (u32) IMM;		\
+		CONT;
+	/* ALU (rest) */
+#define ALU(OPCODE, OP)					\
+	ALU64_##OPCODE##_X:				\
+		DST = DST OP SRC;			\
+		CONT;					\
+	ALU_##OPCODE##_X:				\
+		DST = (u32) DST OP (u32) SRC;		\
+		CONT;					\
+	ALU64_##OPCODE##_K:				\
+		DST = DST OP IMM;			\
+		CONT;					\
+	ALU_##OPCODE##_K:				\
+		DST = (u32) DST OP (u32) IMM;		\
 		CONT;
-
 	ALU(ADD,  +)
 	ALU(SUB,  -)
 	ALU(AND,  &)
 	ALU(OR,   |)
-	ALU(LSH, <<)
-	ALU(RSH, >>)
 	ALU(XOR,  ^)
 	ALU(MUL,  *)
+	SHT(LSH, <<)
+	SHT(RSH, >>)
+#undef SHT
 #undef ALU
 	ALU_NEG:
 		DST = (u32) -DST;
@@ -1368,13 +1393,13 @@ select_insn:
 		insn++;
 		CONT;
 	ALU_ARSH_X:
-		DST = (u64) (u32) (((s32) DST) >> SRC);
+		DST = (u64) (u32) (((s32) DST) >> (SRC & 31));
 		CONT;
 	ALU_ARSH_K:
 		DST = (u64) (u32) (((s32) DST) >> IMM);
 		CONT;
 	ALU64_ARSH_X:
-		(*(s64 *) &DST) >>= SRC;
+		(*(s64 *) &DST) >>= (SRC & 63);
 		CONT;
 	ALU64_ARSH_K:
 		(*(s64 *) &DST) >>= IMM;
Signature · 1 line
2.30.2
author maintainer
#52 lore raw

PATCH 49/122 rtl8xxxu: Fix device info for RTL8192EU devices

In reply to Greg Kroah-Hartman

From: Pascal Terjan <[email protected]>

[ Upstream commit c240b044edefa3c3af4014a4030e017dd95b59a1 ]

Based on 2001:3319 and 2357:0109 which I used to test the fix and 0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.

---
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h  | 11 +---
 .../realtek/rtl8xxxu/rtl8xxxu_8192e.c         | 59 +++++++++++++++++--
 2 files changed, 56 insertions(+), 14 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +3 -8
index 5e9ce03067de..6858f7de0915 100644
@@ -853,15 +853,10 @@ struct rtl8192eu_efuse {
 	u8 usb_optional_function;
 	u8 res9[2];
 	u8 mac_addr[ETH_ALEN];		/* 0xd7 */
-	u8 res10[2];
-	u8 vendor_name[7];
-	u8 res11[2];
-	u8 device_name[0x0b];		/* 0xe8 */
-	u8 res12[2];
-	u8 serial[0x0b];		/* 0xf5 */
-	u8 res13[0x30];
+	u8 device_info[80];
+	u8 res11[3];
 	u8 unknown[0x0d];		/* 0x130 */
-	u8 res14[0xc3];
+	u8 res12[0xc3];
 };
 
 struct rtl8xxxu_reg8val {
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +53 -6

74 lines not on this page · raw message

Signature · 1 line
2.30.2
author maintainer
#51 lore raw

PATCH 48/122 drm/amdkfd: Walk through list with dqm lock hold

In reply to Greg Kroah-Hartman

From: xinhui pan <[email protected]>

[ Upstream commit 56f221b6389e7ab99c30bbf01c71998ae92fc584 ]

To avoid any list corruption.

---
 .../drm/amd/amdkfd/kfd_device_queue_manager.c | 22 ++++++++++---------
 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +12 -10
index ab69898c9cb7..723ec6c2830d 100644
@@ -1584,7 +1584,7 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 		struct qcm_process_device *qpd)
 {
 	int retval;
-	struct queue *q, *next;
+	struct queue *q;
 	struct kernel_queue *kq, *kq_next;
 	struct mqd_manager *mqd_mgr;
 	struct device_process_node *cur, *next_dpn;
@@ -1639,24 +1639,26 @@ static int process_termination_cpsch(struct device_queue_manager *dqm,
 		qpd->reset_wavefronts = false;
 	}
 
-	dqm_unlock(dqm);
-
-	/* Outside the DQM lock because under the DQM lock we can't do
-	 * reclaim or take other locks that others hold while reclaiming.
-	 */
-	if (found)
-		kfd_dec_compute_active(dqm->dev);
-
 	/* Lastly, free mqd resources.
 	 * Do free_mqd() after dqm_unlock to avoid circular locking.
 	 */
-	list_for_each_entry_safe(q, next, &qpd->queues_list, list) {
+	while (!list_empty(&qpd->queues_list)) {
+		q = list_first_entry(&qpd->queues_list, struct queue, list);
 		mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type(
 				q->properties.type)];
 		list_del(&q->list);
 		qpd->queue_count--;
+		dqm_unlock(dqm);
 		mqd_mgr->free_mqd(mqd_mgr, q->mqd, q->mqd_mem_obj);
+		dqm_lock(dqm);
 	}
+	dqm_unlock(dqm);
+
+	/* Outside the DQM lock because under the DQM lock we can't do
+	 * reclaim or take other locks that others hold while reclaiming.
+	 */
+	if (found)
+		kfd_dec_compute_active(dqm->dev);
 
 	return retval;
 }
Signature · 1 line
2.30.2
author maintainer
#53 lore raw

PATCH 50/122 MIPS: add PMD table accounting into MIPSpmd_alloc_one

In reply to Greg Kroah-Hartman

From: Huang Pei <[email protected]>

[ Upstream commit ed914d48b6a1040d1039d371b56273d422c0081e ]

This fixes Page Table accounting bug.

MIPS is the ONLY arch just defining __HAVE_ARCH_PMD_ALLOC_ONE alone. Since commit b2b29d6d011944 (mm: account PMD tables like PTE tables), "pmd_free" in asm-generic with PMD table accounting and "pmd_alloc_one" in MIPS without PMD table accounting causes PageTable accounting number negative, which read by global_zone_page_state(), always returns 0.

---
 arch/mips/include/asm/pgalloc.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
arch/mips/include/asm/pgalloc.h +7 -3
index 166842337eb2..dd10854321ca 100644
@@ -62,11 +62,15 @@ do {							\
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
-	pmd_t *pmd;
+	pmd_t *pmd = NULL;
+	struct page *pg;
 
-	pmd = (pmd_t *) __get_free_pages(GFP_KERNEL, PMD_ORDER);
-	if (pmd)
+	pg = alloc_pages(GFP_KERNEL | __GFP_ACCOUNT, PMD_ORDER);
+	if (pg) {
+		pgtable_pmd_page_ctor(pg);
+		pmd = (pmd_t *)page_address(pg);
 		pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
+	}
 	return pmd;
 }
 
Signature · 1 line
2.30.2
author maintainer
#54 lore raw

PATCH 51/122 atm: nicstar: use dma_free_coherent instead of kfree

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]

When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for error handling, but the correct memory free function should be used, otherwise it will cause an error. Since 'card->rsq.org' and 'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they should be freed using 'dma_free_coherent'.

Fix this by using 'dma_free_coherent' instead of 'kfree'

This log reveals it:

[    3.440294] kernel BUG at mm/slub.c:4206!
[    3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[    3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[    3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.442780] RIP: 0010:kfree+0x26a/0x300
[    3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.443396] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.443396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.443396] Call Trace:
[    3.443396]  ns_init_card_error+0x12c/0x220
[    3.443396]  nicstar_init_one+0x10d2/0x1130
[    3.443396]  local_pci_probe+0x4a/0xb0
[    3.443396]  pci_device_probe+0x126/0x1d0
[    3.443396]  ? pci_device_remove+0x100/0x100
[    3.443396]  really_probe+0x27e/0x650
[    3.443396]  driver_probe_device+0x84/0x1d0
[    3.443396]  ? mutex_lock_nested+0x16/0x20
[    3.443396]  device_driver_attach+0x63/0x70
[    3.443396]  __driver_attach+0x117/0x1a0
[    3.443396]  ? device_driver_attach+0x70/0x70
[    3.443396]  bus_for_each_dev+0xb6/0x110
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  driver_attach+0x22/0x30
[    3.443396]  bus_add_driver+0x1e6/0x2a0
[    3.443396]  driver_register+0xa4/0x180
[    3.443396]  __pci_register_driver+0x77/0x80
[    3.443396]  ? uPD98402_module_init+0xd/0xd
[    3.443396]  nicstar_init+0x1f/0x75
[    3.443396]  do_one_initcall+0x7a/0x3d0
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.443396]  kernel_init_freeable+0x2a7/0x2f9
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  kernel_init+0x13/0x180
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ret_from_fork+0x1f/0x30
[    3.443396] Modules linked in:
[    3.443396] Dumping ftrace buffer:
[    3.443396]    (ftrace buffer empty)
[    3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[    3.458922] RIP: 0010:kfree+0x26a/0x300
[    3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.463368] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.463949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.465860] Kernel panic - not syncing: Fatal exception
[    3.466370] Dumping ftrace buffer:
[    3.466616]    (ftrace buffer empty)
[    3.466871] Kernel Offset: disabled
[    3.467122] Rebooting in 1 seconds..
---
 drivers/atm/nicstar.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/atm/nicstar.c +4 -2
index 5ec7b6a60145..f1e8aa26d284 100644
@@ -837,10 +837,12 @@ static void ns_init_card_error(ns_dev *card, int error)
 			dev_kfree_skb_any(hb);
 	}
 	if (error >= 12) {
-		kfree(card->rsq.org);
+		dma_free_coherent(&card->pcidev->dev, NS_RSQSIZE + NS_RSQ_ALIGNMENT,
+				card->rsq.org, card->rsq.dma);
 	}
 	if (error >= 11) {
-		kfree(card->tsq.org);
+		dma_free_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT,
+				card->tsq.org, card->tsq.dma);
 	}
 	if (error >= 10) {
 		free_irq(card->pcidev->irq, card);
Signature · 1 line
2.30.2
author maintainer
#55 lore raw

PATCH 52/122 atm: nicstar: register the interrupt handler in the right place

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]

Because the error handling is sequential, the application of resources should be carried out in the order of error handling, so the operation of registering the interrupt handler should be put in front, so as not to free the unregistered interrupt handler during error handling.

This log reveals it:

[    3.438724] Trying to free already-free IRQ 23
[    3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[    3.440039] Modules linked in:
[    3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.441561] RIP: 0010:free_irq+0xfb/0x480
[    3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994] FS:  0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[    3.444994] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.444994] Call Trace:
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Kernel panic - not syncing: panic_on_warn set ...
[    3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.444994] Call Trace:
[    3.444994]  dump_stack+0xba/0xf5
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  panic+0x155/0x3ed
[    3.444994]  ? __warn+0xed/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  __warn+0x103/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  report_bug+0x119/0x1c0
[    3.444994]  handle_bug+0x3b/0x80
[    3.444994]  exc_invalid_op+0x18/0x70
[    3.444994]  asm_exc_invalid_op+0x12/0x20
[    3.444994] RIP: 0010:free_irq+0xfb/0x480
[    3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994]  ? vprintk_func+0x71/0x110
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Dumping ftrace buffer:
[    3.444994]    (ftrace buffer empty)
[    3.444994] Kernel Offset: disabled
[    3.444994] Rebooting in 1 seconds..
---
 drivers/atm/nicstar.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/atm/nicstar.c +9 -9
index f1e8aa26d284..f9d29de537b6 100644
@@ -525,6 +525,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
 	/* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */
 	writel(0x00000000, card->membase + VPM);
 
+	card->intcnt = 0;
+	if (request_irq
+	    (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
+		pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
+		error = 9;
+		ns_init_card_error(card, error);
+		return error;
+	}
+
 	/* Initialize TSQ */
 	card->tsq.org = dma_alloc_coherent(&card->pcidev->dev,
 					   NS_TSQSIZE + NS_TSQ_ALIGNMENT,
@@ -751,15 +760,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
 
 	card->efbie = 1;
 
-	card->intcnt = 0;
-	if (request_irq
-	    (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
-		printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
-		error = 9;
-		ns_init_card_error(card, error);
-		return error;
-	}
-
 	/* Register device */
 	card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
 					-1, NULL);
Signature · 1 line
2.30.2
author maintainer
#56 lore raw

PATCH 53/122 vsock: notify server to shutdown when client has pending signal

In reply to Greg Kroah-Hartman

From: Longpeng(Mike) <[email protected]>

[ Upstream commit c7ff9cff70601ea19245d997bb977344663434c7 ]

The client's sk_state will be set to TCP_ESTABLISHED if the server replay the client's connect request.

However, if the client has pending signal, its sk_state will be set to TCP_CLOSE without notify the server, so the server will hold the corrupt connection.

client server

1. sk_state=TCP_SYN_SENT         |
2. call ->connect()              |
3. wait reply                    |
                                 | 4. sk_state=TCP_ESTABLISHED
                                 | 5. insert to connected list
                                 | 6. reply to the client
7. sk_state=TCP_ESTABLISHED      |
8. insert to connected list      |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE           |
client is exiting...             |
11. call ->release()             |
     virtio_transport_close
      if (!(sk->sk_state == TCP_ESTABLISHED ||
	      sk->sk_state == TCP_CLOSING))
		return true; *return at here, the server cannot notice the connection is corrupt*

So the client should notify the peer in this case.

---
 net/vmw_vsock/af_vsock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/vmw_vsock/af_vsock.c +1 -1
index c82e7b52ab1f..d4104144bab1 100644
@@ -1217,7 +1217,7 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr,
 
 		if (signal_pending(current)) {
 			err = sock_intr_errno(timeout);
-			sk->sk_state = TCP_CLOSE;
+			sk->sk_state = sk->sk_state == TCP_ESTABLISHED ? TCP_CLOSING : TCP_CLOSE;
 			sock->state = SS_UNCONNECTED;
 			vsock_transport_cancel_pkt(vsk);
 			goto out_wait;
Signature · 1 line
2.30.2
author maintainer
#27 lore raw

PATCH 27/122 virtio_net: Remove BUG() to avoid machine dead

In reply to Greg Kroah-Hartman

From: Xianting Tian <[email protected]>

[ Upstream commit 85eb1389458d134bdb75dad502cc026c3753a619 ]

We should not directly BUG() when there is hdr error, it is better to output a print when such error happens. Currently, the caller of xmit_skb() already did it.

---
 drivers/net/virtio_net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/virtio_net.c +1 -1
index d8ee001d8e8e..5cd55f950032 100644
@@ -1548,7 +1548,7 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb)
 	if (virtio_net_hdr_from_skb(skb, &hdr->hdr,
 				    virtio_is_little_endian(vi->vdev), false,
 				    0))
-		BUG();
+		return -EPROTO;
 
 	if (vi->mergeable_rx_bufs)
 		hdr->num_buffers = 0;
Signature · 1 line
2.30.2
author maintainer
#57 lore raw

PATCH 54/122 RDMA/rxe: Dont overwrite errno from ib_umem_get()

In reply to Greg Kroah-Hartman

From: Xiao Yang <[email protected]>

[ Upstream commit 20ec0a6d6016aa28b9b3299be18baef1a0f91cd2 ]

rxe_mr_init_user() always returns the fixed -EINVAL when ib_umem_get() fails so it's hard for user to know which actual error happens in ib_umem_get(). For example, ib_umem_get() will return -EOPNOTSUPP when trying to pin pages on a DAX file.

Return actual error as mlx4/mlx5 does.

---
 drivers/infiniband/sw/rxe/rxe_mr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/sw/rxe/rxe_mr.c +1 -1
index ffbc50341a55..f885e245699b 100644
@@ -173,7 +173,7 @@ int rxe_mem_init_user(struct rxe_pd *pd, u64 start,
 	if (IS_ERR(umem)) {
 		pr_warn("err %d from rxe_umem_get\n",
 			(int)PTR_ERR(umem));
-		err = -EINVAL;
+		err = PTR_ERR(umem);
 		goto err1;
 	}
 
Signature · 1 line
2.30.2
author maintainer
#58 lore raw

PATCH 55/122 iwlwifi: mvm: dont change band on bound PHY contexts

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]

When we have a P2P Device active, we attempt to only change the PHY context it uses when we get a new remain-on-channel, if the P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're switching bands then the switch implies a removal and re-add of the PHY context, which isn't permitted by the firmware while it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the band doesn't change (or we have old devices that can switch the band on the fly as well.)

---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 24 ++++++++++++++-----
 1 file changed, 18 insertions(+), 6 deletions(-)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +18 -6
index fc6430edd110..09b1a6beee77 100644
@@ -3725,6 +3725,7 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct cfg80211_chan_def chandef;
 	struct iwl_mvm_phy_ctxt *phy_ctxt;
+	bool band_change_removal;
 	int ret, i;
 
 	IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
@@ -3794,19 +3795,30 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	cfg80211_chandef_create(&chandef, channel, NL80211_CHAN_NO_HT);
 
 	/*
-	 * Change the PHY context configuration as it is currently referenced
-	 * only by the P2P Device MAC
+	 * Check if the remain-on-channel is on a different band and that
+	 * requires context removal, see iwl_mvm_phy_ctxt_changed(). If
+	 * so, we'll need to release and then re-configure here, since we
+	 * must not remove a PHY context that's part of a binding.
 	 */
-	if (mvmvif->phy_ctxt->ref == 1) {
+	band_change_removal =
+		fw_has_capa(&mvm->fw->ucode_capa,
+			    IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT) &&
+		mvmvif->phy_ctxt->channel->band != chandef.chan->band;
+
+	if (mvmvif->phy_ctxt->ref == 1 && !band_change_removal) {
+		/*
+		 * Change the PHY context configuration as it is currently
+		 * referenced only by the P2P Device MAC (and we can modify it)
+		 */
 		ret = iwl_mvm_phy_ctxt_changed(mvm, mvmvif->phy_ctxt,
 					       &chandef, 1, 1);
 		if (ret)
 			goto out_unlock;
 	} else {
 		/*
-		 * The PHY context is shared with other MACs. Need to remove the
-		 * P2P Device from the binding, allocate an new PHY context and
-		 * create a new binding
+		 * The PHY context is shared with other MACs (or we're trying to
+		 * switch bands), so remove the P2P Device from the binding,
+		 * allocate an new PHY context and create a new binding.
 		 */
 		phy_ctxt = iwl_mvm_get_free_phy_ctxt(mvm);
 		if (!phy_ctxt) {
Signature · 1 line
2.30.2
author maintainer
#59 lore raw

PATCH 56/122 iwlwifi: pcie: free IML DMA memory allocation

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit 310f60f53a86eba680d9bc20a371e13b06a5f903 ]

In the case of gen3 devices with image loader (IML) support, we were leaking the IML DMA allocation and never freeing it. Fix that.

---
 .../wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c  | 15 ++++++++++-----
 .../net/wireless/intel/iwlwifi/pcie/internal.h    |  3 +++
 2 files changed, 13 insertions(+), 5 deletions(-)
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c +10 -5
index eab159205e48..f6b43cd87d5d 100644
@@ -63,7 +63,6 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	struct iwl_prph_scratch *prph_scratch;
 	struct iwl_prph_scratch_ctrl_cfg *prph_sc_ctrl;
 	struct iwl_prph_info *prph_info;
-	void *iml_img;
 	u32 control_flags = 0;
 	int ret;
 	int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
@@ -162,14 +161,15 @@ int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	trans_pcie->prph_scratch = prph_scratch;
 
 	/* Allocate IML */
-	iml_img = dma_alloc_coherent(trans->dev, trans->iml_len,
-				     &trans_pcie->iml_dma_addr, GFP_KERNEL);
-	if (!iml_img) {
+	trans_pcie->iml = dma_alloc_coherent(trans->dev, trans->iml_len,
+					     &trans_pcie->iml_dma_addr,
+					     GFP_KERNEL);
+	if (!trans_pcie->iml) {
 		ret = -ENOMEM;
 		goto err_free_ctxt_info;
 	}
 
-	memcpy(iml_img, trans->iml, trans->iml_len);
+	memcpy(trans_pcie->iml, trans->iml, trans->iml_len);
 
 	iwl_enable_fw_load_int_ctx_info(trans);
 
@@ -242,6 +242,11 @@ void iwl_pcie_ctxt_info_gen3_free(struct iwl_trans *trans)
 	trans_pcie->ctxt_info_dma_addr = 0;
 	trans_pcie->ctxt_info_gen3 = NULL;
 
+	dma_free_coherent(trans->dev, trans->iml_len, trans_pcie->iml,
+			  trans_pcie->iml_dma_addr);
+	trans_pcie->iml_dma_addr = 0;
+	trans_pcie->iml = NULL;
+
 	iwl_pcie_ctxt_info_free_fw_img(trans);
 
 	dma_free_coherent(trans->dev, sizeof(*trans_pcie->prph_scratch),
drivers/net/wireless/intel/iwlwifi/pcie/internal.h +3 -0
index 9b5b96e34456..553164f06a6b 100644
@@ -475,6 +475,8 @@ struct cont_rec {
  *	Context information addresses will be taken from here.
  *	This is driver's local copy for keeping track of size and
  *	count for allocating and freeing the memory.
+ * @iml: image loader image virtual address
+ * @iml_dma_addr: image loader image DMA address
  * @trans: pointer to the generic transport area
  * @scd_base_addr: scheduler sram base address in SRAM
  * @scd_bc_tbls: pointer to the byte count table of the scheduler
@@ -522,6 +524,7 @@ struct iwl_trans_pcie {
 	};
 	struct iwl_prph_info *prph_info;
 	struct iwl_prph_scratch *prph_scratch;
+	void *iml;
 	dma_addr_t ctxt_info_dma_addr;
 	dma_addr_t prph_info_dma_addr;
 	dma_addr_t prph_scratch_dma_addr;
Signature · 1 line
2.30.2
author maintainer
#60 lore raw

PATCH 57/122 iwlwifi: pcie: fix context info freeing

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

[ Upstream commit 26d18c75a7496c4c52b0b6789e713dc76ebfbc87 ]

After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called to free the context info. However, on gen3 that will then free the context info with the wrong size.

Since we free this allocation later, let it stick around until the device is stopped for now, freeing some of it earlier is a separate change.

---
 drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c +2 -1
index df8455f14e4d..ee45e475405a 100644
@@ -269,7 +269,8 @@ void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans, u32 scd_addr)
 	/* now that we got alive we can free the fw image & the context info.
 	 * paging memory cannot be freed included since FW will still use it
 	 */
-	iwl_pcie_ctxt_info_free(trans);
+	if (trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210)
+		iwl_pcie_ctxt_info_free(trans);
 
 	/*
 	 * Re-enable all the interrupts, including the RF-Kill one, now that
Signature · 1 line
2.30.2
author maintainer
#61 lore raw

PATCH 58/122 sfc: avoid double pci_remove of VFs

In reply to Greg Kroah-Hartman

From: Íñigo Huguet <[email protected]>

[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]

If pci_remove was called for a PF with VFs, the removal of the VFs was called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove and another implicit by calling pci_disable_sriov, which also perform the VFs remove. This was leading to crashing the kernel on the second attempt.

Given that pci_disable_sriov already calls to pci remove function, get rid of the direct call to pci_driver->remove from the driver.

2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove

Removing sfc module does not trigger the error, at least for me, because it removes the VF first, and then the PF.

Example of a log with the error:

    list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:47!
    [...trimmed...]
    RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
    [...trimmed...]
    Call Trace:
    efx_dissociate+0x1f/0x140 [sfc]
    efx_pci_remove+0x27/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    pci_stop_bus_device+0x69/0x90
    pci_stop_and_remove_bus_device+0xe/0x20
    pci_iov_remove_virtfn+0xba/0x120
    sriov_disable+0x2f/0xe0
    efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
    ? pcie_aer_is_native+0x12/0x40
    efx_ef10_sriov_fini+0x72/0x110 [sfc]
    efx_pci_remove+0x62/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    unbind_store+0xf6/0x130
    kernfs_fop_write+0x116/0x190
    vfs_write+0xa5/0x1a0
    ksys_write+0x4f/0xb0
    do_syscall_64+0x5b/0x1a0
    entry_SYSCALL_64_after_hwframe+0x65/0xca
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)
drivers/net/ethernet/sfc/ef10_sriov.c +1 -9
index 52bd43f45761..695e3508b4d8 100644
@@ -440,7 +440,6 @@ int efx_ef10_sriov_init(struct efx_nic *efx)
 void efx_ef10_sriov_fini(struct efx_nic *efx)
 {
 	struct efx_ef10_nic_data *nic_data = efx->nic_data;
-	unsigned int i;
 	int rc;
 
 	if (!nic_data->vf) {
@@ -450,14 +449,7 @@ void efx_ef10_sriov_fini(struct efx_nic *efx)
 		return;
 	}
 
-	/* Remove any VFs in the host */
-	for (i = 0; i < efx->vf_count; ++i) {
-		struct efx_nic *vf_efx = nic_data->vf[i].efx;
-
-		if (vf_efx)
-			vf_efx->pci_dev->driver->remove(vf_efx->pci_dev);
-	}
-
+	/* Disable SRIOV and remove any VFs in the host */
 	rc = efx_ef10_pci_sriov_disable(efx, true);
 	if (rc)
 		netif_dbg(efx, drv, efx->net_dev,
Signature · 1 line
2.30.2
author maintainer
#62 lore raw

PATCH 59/122 sfc: error code if SRIOV cannot be disabled

In reply to Greg Kroah-Hartman

From: Íñigo Huguet <[email protected]>

[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]

If SRIOV cannot be disabled during device removal or module unloading, return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a guest using Xen, but not with vfio/KVM. Despite that in that case the VFs won't work properly with PF removed and/or the module unloaded, I have let it as is because I don't know what side effects may have changing it, and also it seems to be the same that other drivers are doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior hasn't changed because the function is called with force=false.

---
 drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/net/ethernet/sfc/ef10_sriov.c +11 -4
index 695e3508b4d8..e7c6aa29d323 100644
@@ -403,12 +403,17 @@ fail1:
 	return rc;
 }
 
+/* Disable SRIOV and remove VFs
+ * If some VFs are attached to a guest (using Xen, only) nothing is
+ * done if force=false, and vports are freed if force=true (for the non
+ * attachedc ones, only) but SRIOV is not disabled and VFs are not
+ * removed in either case.
+ */
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
-	unsigned int vfs_assigned = 0;
-
-	vfs_assigned = pci_vfs_assigned(dev);
+	unsigned int vfs_assigned = pci_vfs_assigned(dev);
+	int rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -418,10 +423,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 
 	if (!vfs_assigned)
 		pci_disable_sriov(dev);
+	else
+		rc = -EBUSY;
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;
-	return 0;
+	return rc;
 }
 
 int efx_ef10_sriov_configure(struct efx_nic *efx, int num_vfs)
Signature · 1 line
2.30.2
author maintainer
#63 lore raw

PATCH 60/122 wireless: wext-spy: Fix out-of-bounds warning

In reply to Greg Kroah-Hartman

From: Gustavo A. R. Silva <[email protected]>

[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]

Fix the following out-of-bounds warning:

net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]

The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &threshold.low and &spydata->spy_thr_low. As these are just a couple of struct members, fix this by using direct assignments, instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().

---
 net/wireless/wext-spy.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
net/wireless/wext-spy.c +7 -7
index 33bef22e44e9..b379a0371653 100644
@@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(spydata->spy_thr_low), &(threshold->low),
-	       2 * sizeof(struct iw_quality));
+	spydata->spy_thr_low = threshold->low;
+	spydata->spy_thr_high = threshold->high;
 
 	/* Clear flag */
 	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
@@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(threshold->low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold->low = spydata->spy_thr_low;
+	threshold->high = spydata->spy_thr_high;
 
 	return 0;
 }
@@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device *	dev,
 	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
 	threshold.addr.sa_family = ARPHRD_ETHER;
 	/* Copy stats */
-	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+	threshold.qual = *wstats;
 	/* Copy also thresholds */
-	memcpy(&(threshold.low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold.low = spydata->spy_thr_low;
+	threshold.high = spydata->spy_thr_high;
 
 	/* Send event to user space */
 	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
Signature · 1 line
2.30.2
author maintainer
#64 lore raw

PATCH 61/122 media, bpf: Do not copy more entries than user space requested

In reply to Greg Kroah-Hartman

From: Sean Young <[email protected]>

[ Upstream commit 647d446d66e493d23ca1047fa8492b0269674530 ]

The syscall bpf(BPF_PROG_QUERY, &attr) should use the prog_cnt field to see how many entries user space provided and return ENOSPC if there are more programs than that. Before this patch, this is not checked and ENOSPC is never returned.

Note that one lirc device is limited to 64 bpf programs, and user space I'm aware of -- ir-keytable -- always gives enough space for 64 entries already. However, we should not copy program ids than are requested.

---
 drivers/media/rc/bpf-lirc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/rc/bpf-lirc.c +2 -1
index 0a0ce620e4a2..d5f839fdcde7 100644
@@ -329,7 +329,8 @@ int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr)
 	}
 
 	if (attr->query.prog_cnt != 0 && prog_ids && cnt)
-		ret = bpf_prog_array_copy_to_user(progs, prog_ids, cnt);
+		ret = bpf_prog_array_copy_to_user(progs, prog_ids,
+						  attr->query.prog_cnt);
 
 unlock:
 	mutex_unlock(&ir_raw_handler_lock);
Signature · 1 line
2.30.2
author maintainer
#65 lore raw

PATCH 62/122 net: ip: avoid OOM kills with large UDP sends over loopback

In reply to Greg Kroah-Hartman

From: Jakub Kicinski <[email protected]>

[ Upstream commit 6d123b81ac615072a8525c13c6c41b695270a15d ]

Dave observed number of machines hitting OOM on the UDP send path. The workload seems to be sending large UDP packets over loopback. Since loopback has MTU of 64k kernel will try to allocate an skb with up to 64k of head space. This has a good chance of failing under memory pressure. What's worse if the message length is <32k the allocation may trigger an OOM killer.

This is entirely avoidable, we can use an skb with page frags.

af_unix solves a similar problem by limiting the head length to SKB_MAX_ALLOC. This seems like a good and simple approach. It means that UDP messages > 16kB will now use fragments if underlying device supports SG, if extra allocator pressure causes regressions in real workloads we can switch to trying the large allocation first and falling back.

v4: pre-calculate all the additions to alloclen so
we can be sure it won't go over order-2

---
 net/ipv4/ip_output.c  | 32 ++++++++++++++++++--------------
 net/ipv6/ip6_output.c | 32 +++++++++++++++++---------------
 2 files changed, 35 insertions(+), 29 deletions(-)
net/ipv4/ip_output.c +18 -14
index 7a394479dd56..f52bc9c22e5b 100644
@@ -1048,7 +1048,7 @@ static int __ip_append_data(struct sock *sk,
 			unsigned int datalen;
 			unsigned int fraglen;
 			unsigned int fraggap;
-			unsigned int alloclen;
+			unsigned int alloclen, alloc_extra;
 			unsigned int pagedlen;
 			struct sk_buff *skb_prev;
 alloc_new_skb:
@@ -1068,35 +1068,39 @@ alloc_new_skb:
 			fraglen = datalen + fragheaderlen;
 			pagedlen = 0;
 
+			alloc_extra = hh_len + 15;
+			alloc_extra += exthdrlen;
+
+			/* The last fragment gets additional space at tail.
+			 * Note, with MSG_MORE we overallocate on fragments,
+			 * because we have no idea what fragment will be
+			 * the last.
+			 */
+			if (datalen == length + fraggap)
+				alloc_extra += rt->dst.trailer_len;
+
 			if ((flags & MSG_MORE) &&
 			    !(rt->dst.dev->features&NETIF_F_SG))
 				alloclen = mtu;
-			else if (!paged)
+			else if (!paged &&
+				 (fraglen + alloc_extra < SKB_MAX_ALLOC ||
+				  !(rt->dst.dev->features & NETIF_F_SG)))
 				alloclen = fraglen;
 			else {
 				alloclen = min_t(int, fraglen, MAX_HEADER);
 				pagedlen = fraglen - alloclen;
 			}
 
-			alloclen += exthdrlen;
-
-			/* The last fragment gets additional space at tail.
-			 * Note, with MSG_MORE we overallocate on fragments,
-			 * because we have no idea what fragment will be
-			 * the last.
-			 */
-			if (datalen == length + fraggap)
-				alloclen += rt->dst.trailer_len;
+			alloclen += alloc_extra;
 
 			if (transhdrlen) {
-				skb = sock_alloc_send_skb(sk,
-						alloclen + hh_len + 15,
+				skb = sock_alloc_send_skb(sk, alloclen,
 						(flags & MSG_DONTWAIT), &err);
 			} else {
 				skb = NULL;
 				if (refcount_read(&sk->sk_wmem_alloc) + wmem_alloc_delta <=
 				    2 * sk->sk_sndbuf)
-					skb = alloc_skb(alloclen + hh_len + 15,
+					skb = alloc_skb(alloclen,
 							sk->sk_allocation);
 				if (unlikely(!skb))
 					err = -ENOBUFS;
net/ipv6/ip6_output.c +17 -15
index 7a80c42fcce2..4dcbb1ccab25 100644
@@ -1484,7 +1484,7 @@ emsgsize:
 			unsigned int datalen;
 			unsigned int fraglen;
 			unsigned int fraggap;
-			unsigned int alloclen;
+			unsigned int alloclen, alloc_extra;
 			unsigned int pagedlen;
 alloc_new_skb:
 			/* There's no room in the current skb */
@@ -1511,17 +1511,28 @@ alloc_new_skb:
 			fraglen = datalen + fragheaderlen;
 			pagedlen = 0;
 
+			alloc_extra = hh_len;
+			alloc_extra += dst_exthdrlen;
+			alloc_extra += rt->dst.trailer_len;
+
+			/* We just reserve space for fragment header.
+			 * Note: this may be overallocation if the message
+			 * (without MSG_MORE) fits into the MTU.
+			 */
+			alloc_extra += sizeof(struct frag_hdr);
+
 			if ((flags & MSG_MORE) &&
 			    !(rt->dst.dev->features&NETIF_F_SG))
 				alloclen = mtu;
-			else if (!paged)
+			else if (!paged &&
+				 (fraglen + alloc_extra < SKB_MAX_ALLOC ||
+				  !(rt->dst.dev->features & NETIF_F_SG)))
 				alloclen = fraglen;
 			else {
 				alloclen = min_t(int, fraglen, MAX_HEADER);
 				pagedlen = fraglen - alloclen;
 			}
-
-			alloclen += dst_exthdrlen;
+			alloclen += alloc_extra;
 
 			if (datalen != length + fraggap) {
 				/*
@@ -1531,30 +1542,21 @@ alloc_new_skb:
 				datalen += rt->dst.trailer_len;
 			}
 
-			alloclen += rt->dst.trailer_len;
 			fraglen = datalen + fragheaderlen;
 
-			/*
-			 * We just reserve space for fragment header.
-			 * Note: this may be overallocation if the message
-			 * (without MSG_MORE) fits into the MTU.
-			 */
-			alloclen += sizeof(struct frag_hdr);
-
 			copy = datalen - transhdrlen - fraggap - pagedlen;
 			if (copy < 0) {
 				err = -EINVAL;
 				goto error;
 			}
 			if (transhdrlen) {
-				skb = sock_alloc_send_skb(sk,
-						alloclen + hh_len,
+				skb = sock_alloc_send_skb(sk, alloclen,
 						(flags & MSG_DONTWAIT), &err);
 			} else {
 				skb = NULL;
 				if (refcount_read(&sk->sk_wmem_alloc) + wmem_alloc_delta <=
 				    2 * sk->sk_sndbuf)
-					skb = alloc_skb(alloclen + hh_len,
+					skb = alloc_skb(alloclen,
 							sk->sk_allocation);
 				if (unlikely(!skb))
 					err = -ENOBUFS;
Signature · 1 line
2.30.2
author maintainer
#66 lore raw

PATCH 63/122 RDMA/cma: Fix rdma_resolve_route() memory leak

In reply to Greg Kroah-Hartman

From: Gerd Rausch <[email protected]>

[ Upstream commit 74f160ead74bfe5f2b38afb4fcf86189f9ff40c9 ]

Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id".

This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again.

---
 drivers/infiniband/core/cma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/core/cma.c +2 -1
index 92428990f0cc..ec9e9598894f 100644
@@ -2719,7 +2719,8 @@ static int cma_resolve_ib_route(struct rdma_id_private *id_priv,
 
 	cma_init_resolve_route_work(work, id_priv);
 
-	route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL);
+	if (!route->path_rec)
+		route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL);
 	if (!route->path_rec) {
 		ret = -ENOMEM;
 		goto err1;
Signature · 1 line
2.30.2
author maintainer
#28 lore raw

PATCH 28/122 net: bcmgenet: check return value after calling platform_get_resource()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/broadcom/genet/bcmmii.c +4 -0
index dbe18cdf6c1b..ce569b7d3b35 100644
@@ -426,6 +426,10 @@ static int bcmgenet_mii_register(struct bcmgenet_priv *priv)
 	int id, ret;
 
 	pres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pres) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
 	memset(&res, 0, sizeof(res));
 	memset(&ppd, 0, sizeof(ppd));
 
Signature · 1 line
2.30.2
author maintainer
#69 lore raw

PATCH 66/122 Bluetooth: Shutdown controller after workqueues are flushed or cancelled

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working:

[  509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[  514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[  530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  545.660350] usb 3-10: device descriptor read/64, error -110
[  561.283530] usb 3-10: device descriptor read/64, error -110
[  561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[  568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[  578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[  586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[  596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb:

[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G        W         5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS:  00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865]  ? skb_release_head_state+0x5e/0x80
[ 2048.663873]  kfree_skb+0x2f/0xb0
[ 2048.663881]  btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905]  hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954]  ? __cond_resched+0x1a/0x50
[ 2048.663962]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007]  rfkill_set_block+0x98/0x170
[ 2048.664016]  rfkill_fop_write+0x136/0x1e0
[ 2048.664022]  vfs_write+0xc7/0x260
[ 2048.664030]  ksys_write+0xb1/0xe0
[ 2048.664035]  ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042]  __x64_sys_write+0x1a/0x20
[ 2048.664048]  do_syscall_64+0x40/0xb0
[ 2048.664055]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue.

---
 net/bluetooth/hci_core.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
net/bluetooth/hci_core.c +8 -8
index 21a7ea9b70c8..37b585c9e857 100644
@@ -1672,14 +1672,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
 
 	BT_DBG("%s %p", hdev->name, hdev);
 
-	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
-	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
-	    test_bit(HCI_UP, &hdev->flags)) {
-		/* Execute vendor specific shutdown routine */
-		if (hdev->shutdown)
-			hdev->shutdown(hdev);
-	}
-
 	cancel_delayed_work(&hdev->power_off);
 
 	hci_request_cancel_all(hdev);
@@ -1753,6 +1745,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
 		clear_bit(HCI_INIT, &hdev->flags);
 	}
 
+	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+	    test_bit(HCI_UP, &hdev->flags)) {
+		/* Execute vendor specific shutdown routine */
+		if (hdev->shutdown)
+			hdev->shutdown(hdev);
+	}
+
 	/* flush cmd  work */
 	flush_work(&hdev->cmd_work);
 
Signature · 1 line
2.30.2
author maintainer
#70 lore raw

PATCH 67/122 Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.

In reply to Greg Kroah-Hartman

From: Tim Jiang <[email protected]>

[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]

This is btsoc timing issue, after host start to downloading bt firmware, ep2 need time to switch from function acl to function dfu, so host add 20ms delay as workaround.

---
 drivers/bluetooth/btusb.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/bluetooth/btusb.c +5 -0
index 27ff7a6e2fc9..6d643651d69f 100644
@@ -3263,6 +3263,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
 	sent += size;
 	count -= size;
 
+	/* ep2 need time to switch from function acl to function dfu,
+	 * so we add 20ms delay here.
+	 */
+	msleep(20);
+
 	while (count) {
 		size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
 
Signature · 1 line
2.30.2
author maintainer
#67 lore raw

PATCH 64/122 Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.

In reply to Greg Kroah-Hartman

From: mark-yw.chen <[email protected]>

[ Upstream commit 8454ed9ff9647e31e061fb5eb2e39ce79bc5e960 ]

This patch reduce in-token during download patch procedure. Don't submit urb for polling event before sending hci command.

---
 drivers/bluetooth/btusb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/bluetooth/btusb.c +5 -5
index b467fd05c5e8..27ff7a6e2fc9 100644
@@ -2700,11 +2700,6 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
 	struct btmtk_wmt_hdr *hdr;
 	int err;
 
-	/* Submit control IN URB on demand to process the WMT event */
-	err = btusb_mtk_submit_wmt_recv_urb(hdev);
-	if (err < 0)
-		return err;
-
 	/* Send the WMT command and wait until the WMT event returns */
 	hlen = sizeof(*hdr) + wmt_params->dlen;
 	if (hlen > 255)
@@ -2726,6 +2721,11 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
 		return err;
 	}
 
+	/* Submit control IN URB on demand to process the WMT event */
+	err = btusb_mtk_submit_wmt_recv_urb(hdev);
+	if (err < 0)
+		return err;
+
 	/* The vendor specific WMT commands are all answered by a vendor
 	 * specific event and will have the Command Status or Command
 	 * Complete as with usual HCI command flow control.
Signature · 1 line
2.30.2
author maintainer
#68 lore raw

PATCH 65/122 Bluetooth: Fix the HCI to MGMT status conversion table

In reply to Greg Kroah-Hartman

From: Yu Liu <[email protected]>

[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]

0x2B, 0x31 and 0x33 are reserved for future use but were not present in the HCI to MGMT conversion table, this caused the conversion to be incorrect for the HCI status code greater than 0x2A.

---
 net/bluetooth/mgmt.c | 3 +++
 1 file changed, 3 insertions(+)
net/bluetooth/mgmt.c +3 -0
index db525321da1f..0ae5d3cab4dc 100644
@@ -219,12 +219,15 @@ static u8 mgmt_status_table[] = {
 	MGMT_STATUS_TIMEOUT,		/* Instant Passed */
 	MGMT_STATUS_NOT_SUPPORTED,	/* Pairing Not Supported */
 	MGMT_STATUS_FAILED,		/* Transaction Collision */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_INVALID_PARAMS,	/* Unacceptable Parameter */
 	MGMT_STATUS_REJECTED,		/* QoS Rejected */
 	MGMT_STATUS_NOT_SUPPORTED,	/* Classification Not Supported */
 	MGMT_STATUS_REJECTED,		/* Insufficient Security */
 	MGMT_STATUS_INVALID_PARAMS,	/* Parameter Out Of Range */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_BUSY,		/* Role Switch Pending */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_FAILED,		/* Slot Violation */
 	MGMT_STATUS_FAILED,		/* Role Switch Failed */
 	MGMT_STATUS_INVALID_PARAMS,	/* EIR Too Large */
Signature · 1 line
2.30.2
author maintainer
#71 lore raw

PATCH 68/122 sctp: validate from_addr_param return

In reply to Greg Kroah-Hartman

From: Marcelo Ricardo Leitner <[email protected]>

[ Upstream commit 0c5dc070ff3d6246d22ddd931f23a6266249e3db ]

Ilja reported that, simply putting it, nothing was validating that from_addr_param functions were operating on initialized memory. That is, the parameter itself was being validated by sctp_walk_params, but it doesn't check for types and their specific sizes and it could be a 0-length one, causing from_addr_param to potentially work over the next parameter or even uninitialized memory.

The fix here is to, in all calls to from_addr_param, check if enough space is there for the wanted IP address type.

---
 include/net/sctp/structs.h |  2 +-
 net/sctp/bind_addr.c       | 19 +++++++++++--------
 net/sctp/input.c           |  6 ++++--
 net/sctp/ipv6.c            |  7 ++++++-
 net/sctp/protocol.c        |  7 ++++++-
 net/sctp/sm_make_chunk.c   | 29 ++++++++++++++++-------------
 6 files changed, 44 insertions(+), 26 deletions(-)
include/net/sctp/structs.h +1 -1
index 3e8f87a3c52f..fd7c3f76040c 100644
@@ -466,7 +466,7 @@ struct sctp_af {
 					 int saddr);
 	void		(*from_sk)	(union sctp_addr *,
 					 struct sock *sk);
-	void		(*from_addr_param) (union sctp_addr *,
+	bool		(*from_addr_param) (union sctp_addr *,
 					    union sctp_addr_param *,
 					    __be16 port, int iif);
 	int		(*to_addr_param) (const union sctp_addr *,
net/sctp/bind_addr.c +11 -8
index 701c5a4e441d..a825e74d01fc 100644
@@ -270,22 +270,19 @@ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list,
 		rawaddr = (union sctp_addr_param *)raw_addr_list;
 
 		af = sctp_get_af_specific(param_type2af(param->type));
-		if (unlikely(!af)) {
+		if (unlikely(!af) ||
+		    !af->from_addr_param(&addr, rawaddr, htons(port), 0)) {
 			retval = -EINVAL;
-			sctp_bind_addr_clean(bp);
-			break;
+			goto out_err;
 		}
 
-		af->from_addr_param(&addr, rawaddr, htons(port), 0);
 		if (sctp_bind_addr_state(bp, &addr) != -1)
 			goto next;
 		retval = sctp_add_bind_addr(bp, &addr, sizeof(addr),
 					    SCTP_ADDR_SRC, gfp);
-		if (retval) {
+		if (retval)
 			/* Can't finish building the list, clean up. */
-			sctp_bind_addr_clean(bp);
-			break;
-		}
+			goto out_err;
 
 next:
 		len = ntohs(param->length);
@@ -294,6 +291,12 @@ next:
 	}
 
 	return retval;
+
+out_err:
+	if (retval)
+		sctp_bind_addr_clean(bp);
+
+	return retval;
 }
 
 /********************************************************************
net/sctp/input.c +4 -2
index 7807754f69c5..a84523284777 100644
@@ -1131,7 +1131,8 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net,
 		if (!af)
 			continue;
 
-		af->from_addr_param(paddr, params.addr, sh->source, 0);
+		if (!af->from_addr_param(paddr, params.addr, sh->source, 0))
+			continue;
 
 		asoc = __sctp_lookup_association(net, laddr, paddr, transportp);
 		if (asoc)
@@ -1174,7 +1175,8 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
 	if (unlikely(!af))
 		return NULL;
 
-	af->from_addr_param(&paddr, param, peer_port, 0);
+	if (af->from_addr_param(&paddr, param, peer_port, 0))
+		return NULL;
 
 	return __sctp_lookup_association(net, laddr, &paddr, transportp);
 }
net/sctp/ipv6.c +6 -1
index 52c92b8d827f..fae6157e837a 100644
@@ -530,15 +530,20 @@ static void sctp_v6_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 }
 
 /* Initialize a sctp_addr from an address parameter. */
-static void sctp_v6_from_addr_param(union sctp_addr *addr,
+static bool sctp_v6_from_addr_param(union sctp_addr *addr,
 				    union sctp_addr_param *param,
 				    __be16 port, int iif)
 {
+	if (ntohs(param->v6.param_hdr.length) < sizeof(struct sctp_ipv6addr_param))
+		return false;
+
 	addr->v6.sin6_family = AF_INET6;
 	addr->v6.sin6_port = port;
 	addr->v6.sin6_flowinfo = 0; /* BUG */
 	addr->v6.sin6_addr = param->v6.addr;
 	addr->v6.sin6_scope_id = iif;
+
+	return true;
 }
 
 /* Initialize an address parameter from a sctp_addr and return the length
net/sctp/protocol.c +6 -1
index 981c7cbca46a..7f8702abc7bf 100644
@@ -253,14 +253,19 @@ static void sctp_v4_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 }
 
 /* Initialize a sctp_addr from an address parameter. */
-static void sctp_v4_from_addr_param(union sctp_addr *addr,
+static bool sctp_v4_from_addr_param(union sctp_addr *addr,
 				    union sctp_addr_param *param,
 				    __be16 port, int iif)
 {
+	if (ntohs(param->v4.param_hdr.length) < sizeof(struct sctp_ipv4addr_param))
+		return false;
+
 	addr->v4.sin_family = AF_INET;
 	addr->v4.sin_port = port;
 	addr->v4.sin_addr.s_addr = param->v4.addr.s_addr;
 	memset(addr->v4.sin_zero, 0, sizeof(addr->v4.sin_zero));
+
+	return true;
 }
 
 /* Initialize an address parameter from a sctp_addr and return the length
net/sctp/sm_make_chunk.c +16 -13
index 4ffb9116b6f2..38ca7ce8a44e 100644
@@ -2337,11 +2337,13 @@ int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,
 
 	/* Process the initialization parameters.  */
 	sctp_walk_params(param, peer_init, init_hdr.params) {
-		if (!src_match && (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
-		    param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
+		if (!src_match &&
+		    (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
+		     param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
 			af = sctp_get_af_specific(param_type2af(param.p->type));
-			af->from_addr_param(&addr, param.addr,
-					    chunk->sctp_hdr->source, 0);
+			if (!af->from_addr_param(&addr, param.addr,
+						 chunk->sctp_hdr->source, 0))
+				continue;
 			if (sctp_cmp_addr_exact(sctp_source(chunk), &addr))
 				src_match = 1;
 		}
@@ -2522,7 +2524,8 @@ static int sctp_process_param(struct sctp_association *asoc,
 			break;
 do_addr_param:
 		af = sctp_get_af_specific(param_type2af(param.p->type));
-		af->from_addr_param(&addr, param.addr, htons(asoc->peer.port), 0);
+		if (!af->from_addr_param(&addr, param.addr, htons(asoc->peer.port), 0))
+			break;
 		scope = sctp_scope(peer_addr);
 		if (sctp_in_scope(net, &addr, scope))
 			if (!sctp_assoc_add_peer(asoc, &addr, gfp, SCTP_UNCONFIRMED))
@@ -2623,15 +2626,13 @@ do_addr_param:
 		addr_param = param.v + sizeof(struct sctp_addip_param);
 
 		af = sctp_get_af_specific(param_type2af(addr_param->p.type));
-		if (af == NULL)
+		if (!af)
 			break;
 
-		af->from_addr_param(&addr, addr_param,
-				    htons(asoc->peer.port), 0);
+		if (!af->from_addr_param(&addr, addr_param,
+					 htons(asoc->peer.port), 0))
+			break;
 
-		/* if the address is invalid, we can't process it.
-		 * XXX: see spec for what to do.
-		 */
 		if (!af->addr_valid(&addr, NULL, NULL))
 			break;
 
@@ -3045,7 +3046,8 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	if (unlikely(!af))
 		return SCTP_ERROR_DNS_FAILED;
 
-	af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0);
+	if (!af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0))
+		return SCTP_ERROR_DNS_FAILED;
 
 	/* ADDIP 4.2.1  This parameter MUST NOT contain a broadcast
 	 * or multicast address.
@@ -3322,7 +3324,8 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,
 
 	/* We have checked the packet before, so we do not check again.	*/
 	af = sctp_get_af_specific(param_type2af(addr_param->p.type));
-	af->from_addr_param(&addr, addr_param, htons(bp->port), 0);
+	if (!af->from_addr_param(&addr, addr_param, htons(bp->port), 0))
+		return;
 
 	switch (asconf_param->param_hdr.type) {
 	case SCTP_PARAM_ADD_IP:
Signature · 1 line
2.30.2
author maintainer
#72 lore raw

PATCH 69/122 sctp: add size validation when walking chunks

In reply to Greg Kroah-Hartman

From: Marcelo Ricardo Leitner <[email protected]>

[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]

The first chunk in a packet is ensured to be present at the beginning of sctp_rcv(), as a packet needs to have at least 1 chunk. But the second one, may not be completely available and ch->length can be over uninitialized memory.

Fix here is by only trying to walk on the next chunk if there is enough to hold at least the header, and then proceed with the ch->length validation that is already there.

---
 net/sctp/input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/sctp/input.c +1 -1
index a84523284777..ab84ebf1af4a 100644
@@ -1247,7 +1247,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
 
 		ch = (struct sctp_chunkhdr *)ch_end;
 		chunk_num++;
-	} while (ch_end < skb_tail_pointer(skb));
+	} while (ch_end + sizeof(*ch) < skb_tail_pointer(skb));
 
 	return asoc;
 }
Signature · 1 line
2.30.2
author maintainer
#30 lore raw

PATCH 30/122 net: micrel: check return value after calling platform_get_resource()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

---
 drivers/net/ethernet/micrel/ks8842.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/micrel/ks8842.c +4 -0
index da329ca115cc..fb838e29d52d 100644
@@ -1136,6 +1136,10 @@ static int ks8842_probe(struct platform_device *pdev)
 	unsigned i;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
 	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
 		goto err_mem_region;
 
Signature · 1 line
2.30.2
author maintainer
#29 lore raw

PATCH 29/122 net: mvpp2: check return value after calling platform_get_resource()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 0bb51a3a385790a4be20085494cf78f70dadf646 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +4 -0
index 7857ebff92e8..dac0e51e6aaf 100644
@@ -5740,6 +5740,10 @@ static int mvpp2_probe(struct platform_device *pdev)
 			return PTR_ERR(priv->lms_base);
 	} else {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!res) {
+			dev_err(&pdev->dev, "Invalid resource\n");
+			return -EINVAL;
+		}
 		if (has_acpi_companion(&pdev->dev)) {
 			/* In case the MDIO memory region is declared in
 			 * the ACPI, it can already appear as 'in-use'
Signature · 1 line
2.30.2
author maintainer
#31 lore raw

PATCH 31/122 net: moxa: Use devm_platform_get_and_ioremap_resource()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]

Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it.

---
 drivers/net/ethernet/moxa/moxart_ether.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/ethernet/moxa/moxart_ether.c +2 -3
index f70bb81e1ed6..9f7eaae51335 100644
@@ -480,14 +480,13 @@ static int moxart_mac_probe(struct platform_device *pdev)
 	priv->ndev = ndev;
 	priv->pdev = pdev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ndev->base_addr = res->start;
-	priv->base = devm_ioremap_resource(p_dev, res);
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(priv->base)) {
 		dev_err(p_dev, "devm_ioremap_resource failed\n");
 		ret = PTR_ERR(priv->base);
 		goto init_fail;
 	}
+	ndev->base_addr = res->start;
 
 	spin_lock_init(&priv->txlock);
 
Signature · 1 line
2.30.2
author maintainer
#35 lore raw

PATCH 32/122 drm/amd/display: Update scaling settings on modeset

In reply to Greg Kroah-Hartman

From: Roman Li <[email protected]>

[ Upstream commit c521fc316d12fb9ea7b7680e301d673bceda922e ]

[Why]
We update scaling settings when scaling mode has been changed. However when changing mode from native resolution the scaling mode previously set gets ignored.

[How]
Perform scaling settings update on modeset.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +2 -1
index 6e31e899192c..fca466d4806b 100644
@@ -6832,7 +6832,8 @@ skip_modeset:
 	BUG_ON(dm_new_crtc_state->stream == NULL);
 
 	/* Scaling or underscan settings */
-	if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state))
+	if (is_scaling_state_different(dm_old_conn_state, dm_new_conn_state) ||
+				drm_atomic_crtc_needs_modeset(new_crtc_state))
 		update_stream_scaling_settings(
 			&new_crtc_state->mode, dm_new_conn_state, dm_new_crtc_state->stream);
 
Signature · 1 line
2.30.2
author maintainer
#36 lore raw

PATCH 33/122 drm/amd/display: Release MST resources on switch from MST to SST

In reply to Greg Kroah-Hartman

From: Vladimir Stempen <[email protected]>

[ Upstream commit 3f8518b60c10aa96f3efa38a967a0b4eb9211ac0 ]

[why]
When OS overrides training link training parameters for MST device to SST mode, MST resources are not released and leak of the resource may result crash and incorrect MST discovery during following hot plugs.

[how]
Retaining sink object to be reused by SST link and releasing MST resources.

---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +2 -0
index c18f39271b03..4bc95e9075e9 100644
@@ -1284,6 +1284,8 @@ static void set_dp_mst_mode(struct dc_link *link, bool mst_enable)
 		link->type = dc_connection_single;
 		link->local_sink = link->remote_sinks[0];
 		link->local_sink->sink_signal = SIGNAL_TYPE_DISPLAY_PORT;
+		dc_sink_retain(link->local_sink);
+		dm_helpers_dp_mst_stop_top_mgr(link->ctx, link);
 	} else if (mst_enable == true &&
 			link->type == dc_connection_single &&
 			link->remote_sinks[0] != NULL) {
Signature · 1 line
2.30.2
author maintainer
#24 lore raw

PATCH 24/122 dm space maps: dont reset space map allocation cursor when committing

In reply to Greg Kroah-Hartman

From: Joe Thornber <[email protected]>

[ Upstream commit 5faafc77f7de69147d1e818026b9a0cbf036a7b2 ]

Current commit code resets the place where the search for free blocks will begin back to the start of the metadata device. There are a couple of repercussions to this:

- The first allocation after the commit is likely to take longer than normal as it searches for a free block in an area that is likely to have very few free blocks (if any).

- Any free blocks it finds will have been recently freed. Reusing them means we have fewer old copies of the metadata to aid recovery from hardware error.

Fix these issues by leaving the cursor alone, only resetting when the search hits the end of the metadata device.

---
 drivers/md/persistent-data/dm-space-map-disk.c     | 9 ++++++++-
 drivers/md/persistent-data/dm-space-map-metadata.c | 9 ++++++++-
 2 files changed, 16 insertions(+), 2 deletions(-)
drivers/md/persistent-data/dm-space-map-disk.c +8 -1
index bf4c5e2ccb6f..e0acae7a3815 100644
@@ -171,6 +171,14 @@ static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)
 	 * Any block we allocate has to be free in both the old and current ll.
 	 */
 	r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, smd->begin, smd->ll.nr_blocks, b);
+	if (r == -ENOSPC) {
+		/*
+		 * There's no free block between smd->begin and the end of the metadata device.
+		 * We search before smd->begin in case something has been freed.
+		 */
+		r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, 0, smd->begin, b);
+	}
+
 	if (r)
 		return r;
 
@@ -199,7 +207,6 @@ static int sm_disk_commit(struct dm_space_map *sm)
 		return r;
 
 	memcpy(&smd->old_ll, &smd->ll, sizeof(smd->old_ll));
-	smd->begin = 0;
 	smd->nr_allocated_this_transaction = 0;
 
 	r = sm_disk_get_nr_free(sm, &nr_free);
drivers/md/persistent-data/dm-space-map-metadata.c +8 -1
index 9e3c64ec2026..da439ac85796 100644
@@ -452,6 +452,14 @@ static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b)
 	 * Any block we allocate has to be free in both the old and current ll.
 	 */
 	r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, smm->begin, smm->ll.nr_blocks, b);
+	if (r == -ENOSPC) {
+		/*
+		 * There's no free block between smm->begin and the end of the metadata device.
+		 * We search before smm->begin in case something has been freed.
+		 */
+		r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, 0, smm->begin, b);
+	}
+
 	if (r)
 		return r;
 
@@ -503,7 +511,6 @@ static int sm_metadata_commit(struct dm_space_map *sm)
 		return r;
 
 	memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll));
-	smm->begin = 0;
 	smm->allocated_this_transaction = 0;
 
 	return 0;
Signature · 1 line
2.30.2
author maintainer
#74 lore raw

PATCH 71/122 MIPS: set mips32r5 for virt extensions

In reply to Greg Kroah-Hartman

From: Nick Desaulniers <[email protected]>

[ Upstream commit c994a3ec7ecc8bd2a837b2061e8a76eb8efc082b ]

Clang's integrated assembler only accepts these instructions when the cpu is set to mips32r5. With this change, we can assemble malta_defconfig with Clang via make LLVM_IAS=1.

---
 arch/mips/include/asm/mipsregs.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/mips/include/asm/mipsregs.h +4 -4
index 3afdb39d092a..c28b892937fe 100644
@@ -2007,7 +2007,7 @@ _ASM_MACRO_0(tlbginvf, _ASM_INSN_IF_MIPS(0x4200000c)
 ({ int __res;								\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips32r2\n\t"					\
+		".set\tmips32r5\n\t"					\
 		_ASM_SET_VIRT						\
 		"mfgc0\t%0, " #source ", %1\n\t"			\
 		".set\tpop"						\
@@ -2020,7 +2020,7 @@ _ASM_MACRO_0(tlbginvf, _ASM_INSN_IF_MIPS(0x4200000c)
 ({ unsigned long long __res;						\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips64r2\n\t"					\
+		".set\tmips64r5\n\t"					\
 		_ASM_SET_VIRT						\
 		"dmfgc0\t%0, " #source ", %1\n\t"			\
 		".set\tpop"						\
@@ -2033,7 +2033,7 @@ _ASM_MACRO_0(tlbginvf, _ASM_INSN_IF_MIPS(0x4200000c)
 do {									\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips32r2\n\t"					\
+		".set\tmips32r5\n\t"					\
 		_ASM_SET_VIRT						\
 		"mtgc0\t%z0, " #register ", %1\n\t"			\
 		".set\tpop"						\
@@ -2045,7 +2045,7 @@ do {									\
 do {									\
 	__asm__ __volatile__(						\
 		".set\tpush\n\t"					\
-		".set\tmips64r2\n\t"					\
+		".set\tmips64r5\n\t"					\
 		_ASM_SET_VIRT						\
 		"dmtgc0\t%z0, " #register ", %1\n\t"			\
 		".set\tpop"						\
Signature · 1 line
2.30.2
author maintainer
#83 lore raw

PATCH 80/122 drm/amd/display: fix incorrrect valid irq check

In reply to Greg Kroah-Hartman

From: Guchun Chen <[email protected]>

commit e38ca7e422791a4d1c01e56dbf7f9982db0ed365 upstream.

valid DAL irq should be < DAL_IRQ_SOURCES_NUMBER.

---
 drivers/gpu/drm/amd/display/dc/irq_types.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/irq_types.h +1 -1
@@ -163,7 +163,7 @@ enum irq_type
 };
 
 #define DAL_VALID_IRQ_SRC_NUM(src) \
-	((src) <= DAL_IRQ_SOURCES_NUMBER && (src) > DC_IRQ_SOURCE_INVALID)
+	((src) < DAL_IRQ_SOURCES_NUMBER && (src) > DC_IRQ_SOURCE_INVALID)
 
 /* Number of Page Flip IRQ Sources. */
 #define DAL_PFLIP_IRQ_SRC_NUM \
author maintainer
#84 lore raw

PATCH 81/122 pinctrl/amd: Add device HID for new AMD GPIO controller

In reply to Greg Kroah-Hartman

From: Maximilian Luz <[email protected]>

commit 1ca46d3e43569186bd1decfb02a6b4c4ddb4304b upstream.

Add device HID AMDI0031 to the AMD GPIO controller driver match table. This controller can be found on Microsoft Surface Laptop 4 devices and seems similar enough that we can just copy the existing AMDI0030 entry.

---
 drivers/pinctrl/pinctrl-amd.c |    1 +
 1 file changed, 1 insertion(+)
drivers/pinctrl/pinctrl-amd.c +1 -0
@@ -958,6 +958,7 @@ static int amd_gpio_remove(struct platfo
 static const struct acpi_device_id amd_gpio_acpi_match[] = {
 	{ "AMD0030", 0 },
 	{ "AMDI0030", 0},
+	{ "AMDI0031", 0},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, amd_gpio_acpi_match);
author maintainer
#85 lore raw

PATCH 82/122 drm/amd/display: Reject non-zero src_y and src_x for video planes

In reply to Greg Kroah-Hartman

From: Harry Wentland <[email protected]>

commit c6c6a712199ab355ce333fa5764a59506bb107c1 upstream.

[Why]
This hasn't been well tested and leads to complete system hangs on DCN1 based systems, possibly others.

The system hang can be reproduced by gesturing the video on the YouTube Android app on ChromeOS into full screen.

[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.

v2:
- Add code comment describing the reason we're rejecting non-zero src_x and src_y
- Drop gerrit Change-Id
- Add stable CC
- Based on amd-staging-drm-next

v3: removed trailing whitespace

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +17 -0
@@ -2649,6 +2649,23 @@ static int fill_dc_scaling_info(const st
 	     scaling_info->src_rect.y != 0))
 		return -EINVAL;
 
+	/*
+	 * For reasons we don't (yet) fully understand a non-zero
+	 * src_y coordinate into an NV12 buffer can cause a
+	 * system hang. To avoid hangs (and maybe be overly cautious)
+	 * let's reject both non-zero src_x and src_y.
+	 *
+	 * We currently know of only one use-case to reproduce a
+	 * scenario with non-zero src_x and src_y for NV12, which
+	 * is to gesture the YouTube Android app into full screen
+	 * on ChromeOS.
+	 */
+	if (state->fb &&
+	    state->fb->format->format == DRM_FORMAT_NV12 &&
+	    (scaling_info->src_rect.x != 0 ||
+	     scaling_info->src_rect.y != 0))
+		return -EINVAL;
+
 	scaling_info->src_rect.width = state->src_w >> 16;
 	if (scaling_info->src_rect.width == 0)
 		return -EINVAL;
author maintainer
#86 lore raw

PATCH 83/122 drm/tegra: Dont set allow_fb_modifiers explicitly

In reply to Greg Kroah-Hartman

From: Daniel Vetter <[email protected]>

commit be4306ad928fcf736cbe2616b6dd19d91f1bc083 upstream.

Since

commit 890880ddfdbe256083170866e49c87618b706ac7

Author: Paul Kocialkowski <[email protected]>
Date:   Fri Jan 4 09:56:10 2019 +0100

drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here.

It was slightly inconsistently though, since planes with only linear modifier support haven't listed that explicitly. Fix that, and cc:
stable to allow userspace to rely on this. Again don't backport further than where Paul's patch got added.

---
 drivers/gpu/drm/tegra/dc.c  |   10 ++++++++--
 drivers/gpu/drm/tegra/drm.c |    2 --
 2 files changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/tegra/dc.c +8 -2
@@ -919,6 +919,11 @@ static const struct drm_plane_helper_fun
 	.atomic_disable = tegra_cursor_atomic_disable,
 };
 
+static const uint64_t linear_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 static struct drm_plane *tegra_dc_cursor_plane_create(struct drm_device *drm,
 						      struct tegra_dc *dc)
 {
@@ -947,7 +952,7 @@ static struct drm_plane *tegra_dc_cursor
 
 	err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
 				       &tegra_plane_funcs, formats,
-				       num_formats, NULL,
+				       num_formats, linear_modifiers,
 				       DRM_PLANE_TYPE_CURSOR, NULL);
 	if (err < 0) {
 		kfree(plane);
@@ -1065,7 +1070,8 @@ static struct drm_plane *tegra_dc_overla
 
 	err = drm_universal_plane_init(drm, &plane->base, possible_crtcs,
 				       &tegra_plane_funcs, formats,
-				       num_formats, NULL, type, NULL);
+				       num_formats, linear_modifiers,
+				       type, NULL);
 	if (err < 0) {
 		kfree(plane);
 		return ERR_PTR(err);
drivers/gpu/drm/tegra/drm.c +0 -2
@@ -122,8 +122,6 @@ static int tegra_drm_load(struct drm_dev
 	drm->mode_config.max_width = 4096;
 	drm->mode_config.max_height = 4096;
 
-	drm->mode_config.allow_fb_modifiers = true;
-
 	drm->mode_config.normalize_zpos = true;
 
 	drm->mode_config.funcs = &tegra_drm_mode_config_funcs;
author maintainer
#87 lore raw

PATCH 84/122 drm/msm/mdp4: Fix modifier support enabling

In reply to Greg Kroah-Hartman

From: Daniel Vetter <[email protected]>

commit 35cbb8c91e9cf310277d3dfb4d046df8edf2df33 upstream.

Setting the cap without the modifier list is very confusing to userspace. Fix that by listing the ones we support explicitly.

Stable backport so that userspace can rely on this working in a reasonable way, i.e. that the cap set implies IN_FORMATS is available.

---
 drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c   |    2 --
 drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c |    8 +++++++-
 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c +0 -2
@@ -88,8 +88,6 @@ static int mdp4_hw_init(struct msm_kms *
 	if (mdp4_kms->rev > 1)
 		mdp4_write(mdp4_kms, REG_MDP4_RESET_STATUS, 1);
 
-	dev->mode_config.allow_fb_modifiers = true;
-
 out:
 	pm_runtime_put_sync(dev->dev);
 
drivers/gpu/drm/msm/disp/mdp4/mdp4_plane.c +7 -1
@@ -347,6 +347,12 @@ enum mdp4_pipe mdp4_plane_pipe(struct dr
 	return mdp4_plane->pipe;
 }
 
+static const uint64_t supported_format_modifiers[] = {
+	DRM_FORMAT_MOD_SAMSUNG_64_32_TILE,
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 /* initialize plane */
 struct drm_plane *mdp4_plane_init(struct drm_device *dev,
 		enum mdp4_pipe pipe_id, bool private_plane)
@@ -375,7 +381,7 @@ struct drm_plane *mdp4_plane_init(struct
 	type = private_plane ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
 	ret = drm_universal_plane_init(dev, plane, 0xff, &mdp4_plane_funcs,
 				 mdp4_plane->formats, mdp4_plane->nformats,
-				 NULL, type, NULL);
+				 supported_format_modifiers, type, NULL);
 	if (ret)
 		goto fail;
 
author maintainer
#88 lore raw

PATCH 85/122 drm/arm/malidp: Always list modifiers

In reply to Greg Kroah-Hartman

From: Daniel Vetter <[email protected]>

commit 26c3e7fd5a3499e408915dadae5d5360790aae9a upstream.

Even when all we support is linear, make that explicit. Otherwise the uapi is rather confusing.

---
 drivers/gpu/drm/arm/malidp_planes.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/arm/malidp_planes.c +7 -2
@@ -922,6 +922,11 @@ static const struct drm_plane_helper_fun
 	.atomic_disable = malidp_de_plane_disable,
 };
 
+static const uint64_t linear_only_modifiers[] = {
+	DRM_FORMAT_MOD_LINEAR,
+	DRM_FORMAT_MOD_INVALID
+};
+
 int malidp_de_planes_init(struct drm_device *drm)
 {
 	struct malidp_drm *malidp = drm->dev_private;
@@ -985,8 +990,8 @@ int malidp_de_planes_init(struct drm_dev
 		 */
 		ret = drm_universal_plane_init(drm, &plane->base, crtcs,
 				&malidp_de_plane_funcs, formats, n,
-				(id == DE_SMART) ? NULL : modifiers, plane_type,
-				NULL);
+				(id == DE_SMART) ? linear_only_modifiers : modifiers,
+				plane_type, NULL);
 
 		if (ret < 0)
 			goto cleanup;
author maintainer
#89 lore raw

PATCH 86/122 mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode

In reply to Greg Kroah-Hartman

From: Al Cooper <[email protected]>

commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream.

When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value().

This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following
command: "mmc rpmb read-counter /dev/mmcblk0rpmb".

---
 drivers/mmc/host/sdhci.c |    4 ++++
 drivers/mmc/host/sdhci.h |    1 +
 2 files changed, 5 insertions(+)
drivers/mmc/host/sdhci.c +4 -0
@@ -1511,6 +1511,10 @@ static u16 sdhci_get_preset_value(struct
 	u16 preset = 0;
 
 	switch (host->timing) {
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+		preset = sdhci_readw(host, SDHCI_PRESET_FOR_HIGH_SPEED);
+		break;
 	case MMC_TIMING_UHS_SDR12:
 		preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
 		break;
drivers/mmc/host/sdhci.h +1 -0
@@ -261,6 +261,7 @@
 
 /* 60-FB reserved */
 
+#define SDHCI_PRESET_FOR_HIGH_SPEED	0x64
 #define SDHCI_PRESET_FOR_SDR12 0x66
 #define SDHCI_PRESET_FOR_SDR25 0x68
 #define SDHCI_PRESET_FOR_SDR50 0x6A
author maintainer
#90 lore raw

PATCH 87/122 mmc: core: clear flags before allowing to retune

In reply to Greg Kroah-Hartman

From: Wolfram Sang <[email protected]>

commit 77347eda64ed5c9383961d1de9165f9d0b7d8df6 upstream.

It might be that something goes wrong during tuning so the MMC core will immediately trigger a retune. In our case it was:

- we sent a tuning block
- there was an error so we need to send an abort cmd to the eMMC
- the abort cmd had a CRC error
- retune was set by the MMC core

This lead to a vicious circle causing a performance regression of 75%. So, clear retuning flags before we enable retuning to start with a known cleared state.

Reported-by Yoshihiro Shimoda <[email protected]>

---
 drivers/mmc/core/core.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/mmc/core/core.c +5 -2
@@ -953,11 +953,14 @@ int mmc_execute_tuning(struct mmc_card *
 
 	err = host->ops->execute_tuning(host, opcode);
 
-	if (err)
+	if (err) {
 		pr_err("%s: tuning execution failed: %d\n",
 			mmc_hostname(host), err);
-	else
+	} else {
+		host->retune_now = 0;
+		host->need_retune = 0;
 		mmc_retune_enable(host);
+	}
 
 	return err;
 }
author maintainer
#91 lore raw

PATCH 88/122 mmc: core: Allow UHS-I voltage switch for SDSC cards if supported

In reply to Greg Kroah-Hartman

From: Christian Löhle <[email protected]>

commit 09247e110b2efce3a104e57e887c373e0a57a412 upstream.

While initializing an UHS-I SD card, the mmc core first tries to switch to 1.8V I/O voltage, before it continues to change the settings for the bus speed mode.

However, the current behaviour in the mmc core is inconsistent and doesn't conform to the SD spec. More precisely, an SD card that supports UHS-I must set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register response. When switching to 1.8V I/O the mmc core correctly checks both of the bits, but only the SD_OCR_S18R bit when changing the settings for bus speed mode.

Rather than actually fixing the code to confirm to the SD spec, let's deliberately deviate from it by requiring only the SD_OCR_S18R bit for both parts. This enables us to support UHS-I for SDSC cards (outside spec), which is actually being supported by some existing SDSC cards. Moreover, this fixes the inconsistent behaviour.

---
 drivers/mmc/core/sd.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/mmc/core/sd.c +6 -4
@@ -793,11 +793,13 @@ try_again:
 		return err;
 
 	/*
-	 * In case CCS and S18A in the response is set, start Signal Voltage
-	 * Switch procedure. SPI mode doesn't support CMD11.
+	 * In case the S18A bit is set in the response, let's start the signal
+	 * voltage switch procedure. SPI mode doesn't support CMD11.
+	 * Note that, according to the spec, the S18A bit is not valid unless
+	 * the CCS bit is set as well. We deliberately deviate from the spec in
+	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr &&
-	   ((*rocr & 0x41000000) == 0x41000000)) {
+	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
author maintainer
#92 lore raw

PATCH 89/122 ata: ahci_sunxi: Disable DIPM

In reply to Greg Kroah-Hartman

From: Timo Sigurdsson <[email protected]>

commit f6bca4d91b2ea052e917cca3f9d866b5cc1d500a upstream.

DIPM is unsupported or broken on sunxi. Trying to enable the power management policy med_power_with_dipm on an Allwinner A20 SoC based board leads to immediate I/O errors and the attached SATA disk disappears from the /dev filesystem. A reset (power cycle) is required to make the SATA controller or disk work again. The A10 and A20 SoC data sheets and manuals don't mention DIPM at all [1], so it's fair to assume that it's simply not supported. But even if it was, it should be considered broken and best be disabled in the ahci_sunxi driver.

[1] https://github.com/allwinner-zh/documents/tree/master/

Fixes c5754b5220f0 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform")
---
 drivers/ata/ahci_sunxi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/ahci_sunxi.c +1 -1
@@ -200,7 +200,7 @@ static void ahci_sunxi_start_engine(stru
 }
 
 static const struct ata_port_info ahci_sunxi_port_info = {
-	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ | ATA_FLAG_NO_DIPM,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &ahci_platform_ops,
author maintainer
#75 lore raw

PATCH 72/122 fscrypt: dont ignore minor_hash when hash is 0

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 77f30bfcfcf484da7208affd6a9e63406420bf91 upstream.

When initializing a no-key name, fscrypt_fname_disk_to_usr() sets the minor_hash to 0 if the (major) hash is 0.

This doesn't make sense because 0 is a valid hash code, so we shouldn't ignore the filesystem-provided minor_hash in that case. Fix this by removing the special case for 'hash == 0'.

This is an old bug that appears to have originated when the encryption code in ext4 and f2fs was moved into fs/crypto/. The original ext4 and f2fs code passed the hash by pointer instead of by value. So 'if (hash)' actually made sense then, as it was checking whether a pointer was NULL. But now the hashes are passed by value, and filesystems just pass 0 for any hashes they don't have. There is no need to handle this any differently from the hashes actually being 0.

It is difficult to reproduce this bug, as it only made a difference in the case where a filename's 32-bit major hash happened to be 0. However, it probably had the largest chance of causing problems on ubifs, since ubifs uses minor_hash to do lookups of no-key names, in addition to using it as a readdir cookie. ext4 only uses minor_hash as a readdir cookie, and f2fs doesn't use minor_hash at all.

Fixes 0b81d0779072 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto")
Cc <[email protected]> # v4.6+
---
 fs/crypto/fname.c |    9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
fs/crypto/fname.c +2 -7
@@ -273,13 +273,8 @@ int fscrypt_fname_disk_to_usr(struct ino
 					   oname->name);
 		return 0;
 	}
-	if (hash) {
-		digested_name.hash = hash;
-		digested_name.minor_hash = minor_hash;
-	} else {
-		digested_name.hash = 0;
-		digested_name.minor_hash = 0;
-	}
+	digested_name.hash = hash;
+	digested_name.minor_hash = minor_hash;
 	memcpy(digested_name.digest,
 	       FSCRYPT_FNAME_DIGEST(iname->name, iname->len),
 	       FSCRYPT_FNAME_DIGEST_SIZE);
author maintainer
#93 lore raw

PATCH 90/122 cpu/hotplug: Cure the cpusets trainwreck

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

commit b22afcdf04c96ca58327784e280e10288cfd3303 upstream.

Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered.

cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order.

As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed.

The same is true for CPU unplug, but that does not create user observable failure (yet).

It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable.

Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago:

3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")

the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that.

So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever.

Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock.

Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway.

This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story.

Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it.

Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened.

---
 kernel/cpu.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
kernel/cpu.c +49 -0
@@ -32,6 +32,7 @@
 #include <linux/relay.h>
 #include <linux/slab.h>
 #include <linux/percpu-rwsem.h>
+#include <linux/cpuset.h>
 
 #include <trace/events/power.h>
 #define CREATE_TRACE_POINTS
@@ -814,6 +815,52 @@ void __init cpuhp_threads_init(void)
 	kthread_unpark(this_cpu_read(cpuhp_state.thread));
 }
 
+/*
+ *
+ * Serialize hotplug trainwrecks outside of the cpu_hotplug_lock
+ * protected region.
+ *
+ * The operation is still serialized against concurrent CPU hotplug via
+ * cpu_add_remove_lock, i.e. CPU map protection.  But it is _not_
+ * serialized against other hotplug related activity like adding or
+ * removing of state callbacks and state instances, which invoke either the
+ * startup or the teardown callback of the affected state.
+ *
+ * This is required for subsystems which are unfixable vs. CPU hotplug and
+ * evade lock inversion problems by scheduling work which has to be
+ * completed _before_ cpu_up()/_cpu_down() returns.
+ *
+ * Don't even think about adding anything to this for any new code or even
+ * drivers. It's only purpose is to keep existing lock order trainwrecks
+ * working.
+ *
+ * For cpu_down() there might be valid reasons to finish cleanups which are
+ * not required to be done under cpu_hotplug_lock, but that's a different
+ * story and would be not invoked via this.
+ */
+static void cpu_up_down_serialize_trainwrecks(bool tasks_frozen)
+{
+	/*
+	 * cpusets delegate hotplug operations to a worker to "solve" the
+	 * lock order problems. Wait for the worker, but only if tasks are
+	 * _not_ frozen (suspend, hibernate) as that would wait forever.
+	 *
+	 * The wait is required because otherwise the hotplug operation
+	 * returns with inconsistent state, which could even be observed in
+	 * user space when a new CPU is brought up. The CPU plug uevent
+	 * would be delivered and user space reacting on it would fail to
+	 * move tasks to the newly plugged CPU up to the point where the
+	 * work has finished because up to that point the newly plugged CPU
+	 * is not assignable in cpusets/cgroups. On unplug that's not
+	 * necessarily a visible issue, but it is still inconsistent state,
+	 * which is the real problem which needs to be "fixed". This can't
+	 * prevent the transient state between scheduling the work and
+	 * returning from waiting for it.
+	 */
+	if (!tasks_frozen)
+		cpuset_wait_for_hotplug();
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 #ifndef arch_clear_mm_cpumask_cpu
 #define arch_clear_mm_cpumask_cpu(cpu, mm) cpumask_clear_cpu(cpu, mm_cpumask(mm))
@@ -1051,6 +1098,7 @@ out:
 	 */
 	lockup_detector_cleanup();
 	arch_smt_update();
+	cpu_up_down_serialize_trainwrecks(tasks_frozen);
 	return ret;
 }
 
@@ -1186,6 +1234,7 @@ static int _cpu_up(unsigned int cpu, int
 out:
 	cpus_write_unlock();
 	arch_smt_update();
+	cpu_up_down_serialize_trainwrecks(tasks_frozen);
 	return ret;
 }
 
author maintainer
#94 lore raw

PATCH 91/122 clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround

In reply to Greg Kroah-Hartman

From: Samuel Holland <[email protected]>

commit 8b33dfe0ba1c84c1aab2456590b38195837f1e6e upstream.

Bad counter reads are experienced sometimes when bit 10 or greater rolls over. Originally, testing showed that at least 10 lower bits would be set to the same value during these bad reads. However, some users still reported time skips.

Wider testing revealed that on some chips, occasionally only the lowest 9 bits would read as the anomalous value. During these reads (which still happen only when bit 10), bit 9 would read as the correct value.

Reduce the mask by one bit to cover these cases as well.

Fixes c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
---
 drivers/clocksource/arm_arch_timer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clocksource/arm_arch_timer.c +1 -1
@@ -348,7 +348,7 @@ static u64 notrace arm64_858921_read_cnt
 	do {								\
 		_val = read_sysreg(reg);				\
 		_retries--;						\
-	} while (((_val + 1) & GENMASK(9, 0)) <= 1 && _retries);	\
+	} while (((_val + 1) & GENMASK(8, 0)) <= 1 && _retries);	\
 									\
 	WARN_ON_ONCE(!_retries);					\
 	_val;								\
author maintainer
#95 lore raw

PATCH 92/122 fpga: stratix10-soc: Add missing fpga_mgr_free() call

In reply to Greg Kroah-Hartman

From: Russ Weight <[email protected]>

commit d9ec9daa20eb8de1efe6abae78c9835ec8ed86f9 upstream.

The stratix10-soc driver uses fpga_mgr_create() function and is therefore responsible to call fpga_mgr_free() to release the class driver resources. Add a missing call to fpga_mgr_free in the s10_remove() function.

Fixes e7eef1d7633a ("fpga: add intel stratix10 soc fpga manager driver")
Cc stable <[email protected]>
---
 drivers/fpga/stratix10-soc.c |    1 +
 1 file changed, 1 insertion(+)
drivers/fpga/stratix10-soc.c +1 -0
@@ -476,6 +476,7 @@ static int s10_remove(struct platform_de
 	struct s10_priv *priv = mgr->priv;
 
 	fpga_mgr_unregister(mgr);
+	fpga_mgr_free(mgr);
 	stratix10_svc_free_channel(priv->chan);
 
 	return 0;
author maintainer
#96 lore raw

PATCH 93/122 MIPS: fix "mipsel-linux-ld: decompress.c:undefined reference to `memmove"

In reply to Greg Kroah-Hartman

From: Gao Xiang <[email protected]>

This is _not_ an upstream commit and just for 5.4.y only.

kernel test robot reported a 5.4.y build issue found by randconfig [1] after backporting commit 89b158635ad7 ("lib/lz4: explicitly support in-place decompression"") due to "undefined reference to `memmove'".

However, upstream and 5.10 LTS seem fine. After digging further, I found commit a510b616131f ("MIPS: Add support for ZSTD-compressed kernels") introduced memmove() occasionally and it has been included since v5.10.

This partially cherry-picks the memmove() part of commit a510b616131f to fix the reported build regression since we don't need the whole patch for 5.4 LTS at all.

[1] https://lore.kernel.org/r/[email protected]/

Fixes defcc2b5e54a ("lib/lz4: explicitly support in-place decompression") # 5.4.y
---
 arch/mips/boot/compressed/string.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/mips/boot/compressed/string.c +17 -0
@@ -5,6 +5,7 @@
  * Very small subset of simple string routines
  */
 
+#include <linux/compiler_attributes.h>
 #include <linux/types.h>
 
 void *memcpy(void *dest, const void *src, size_t n)
@@ -27,3 +28,19 @@ void *memset(void *s, int c, size_t n)
 		ss[i] = c;
 	return s;
 }
+
+void * __weak memmove(void *dest, const void *src, size_t n)
+{
+	unsigned int i;
+	const char *s = src;
+	char *d = dest;
+
+	if ((uintptr_t)dest < (uintptr_t)src) {
+		for (i = 0; i < n; i++)
+			d[i] = s[i];
+	} else {
+		for (i = n; i > 0; i--)
+			d[i - 1] = s[i - 1];
+	}
+	return dest;
+}
author maintainer
#97 lore raw

PATCH 94/122 ASoC: tegra: Set driver_name=tegra for all machine drivers

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

commit f6eb84fa596abf28959fc7e0b626f925eb1196c7 upstream.

The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise Tegra UCMs don't match by the path/name.

All Tegra machine drivers are specifying the card's name, but it has no effect if model name is specified in the device-tree since it overrides the card's name. We need to set the driver_name to "tegra" in order to get a usable lookup path for the updated ALSA UCMs. The new UCM lookup path has a form of driver_name/card_name.

The old lookup paths that are based on driver module name continue to work as before. Note that UCM matching never worked for Tegra ASoC drivers if they were compiled as built-in, this is fixed by supporting the new naming scheme.

---
 sound/soc/tegra/tegra_alc5632.c  |    1 +
 sound/soc/tegra/tegra_max98090.c |    1 +
 sound/soc/tegra/tegra_rt5640.c   |    1 +
 sound/soc/tegra/tegra_rt5677.c   |    1 +
 sound/soc/tegra/tegra_sgtl5000.c |    1 +
 sound/soc/tegra/tegra_wm8753.c   |    1 +
 sound/soc/tegra/tegra_wm8903.c   |    1 +
 sound/soc/tegra/tegra_wm9712.c   |    1 +
 sound/soc/tegra/trimslice.c      |    1 +
 9 files changed, 9 insertions(+)
sound/soc/tegra/tegra_alc5632.c +1 -0
@@ -139,6 +139,7 @@ static struct snd_soc_dai_link tegra_alc
 
 static struct snd_soc_card snd_soc_tegra_alc5632 = {
 	.name = "tegra-alc5632",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_alc5632_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_max98090.c +1 -0
@@ -182,6 +182,7 @@ static struct snd_soc_dai_link tegra_max
 
 static struct snd_soc_card snd_soc_tegra_max98090 = {
 	.name = "tegra-max98090",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_max98090_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_rt5640.c +1 -0
@@ -132,6 +132,7 @@ static struct snd_soc_dai_link tegra_rt5
 
 static struct snd_soc_card snd_soc_tegra_rt5640 = {
 	.name = "tegra-rt5640",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_rt5640_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_rt5677.c +1 -0
@@ -175,6 +175,7 @@ static struct snd_soc_dai_link tegra_rt5
 
 static struct snd_soc_card snd_soc_tegra_rt5677 = {
 	.name = "tegra-rt5677",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_rt5677_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_sgtl5000.c +1 -0
@@ -97,6 +97,7 @@ static struct snd_soc_dai_link tegra_sgt
 
 static struct snd_soc_card snd_soc_tegra_sgtl5000 = {
 	.name = "tegra-sgtl5000",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_sgtl5000_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_wm8753.c +1 -0
@@ -101,6 +101,7 @@ static struct snd_soc_dai_link tegra_wm8
 
 static struct snd_soc_card snd_soc_tegra_wm8753 = {
 	.name = "tegra-wm8753",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_wm8753_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_wm8903.c +1 -0
@@ -217,6 +217,7 @@ static struct snd_soc_dai_link tegra_wm8
 
 static struct snd_soc_card snd_soc_tegra_wm8903 = {
 	.name = "tegra-wm8903",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_wm8903_dai,
 	.num_links = 1,
sound/soc/tegra/tegra_wm9712.c +1 -0
@@ -54,6 +54,7 @@ static struct snd_soc_dai_link tegra_wm9
 
 static struct snd_soc_card snd_soc_tegra_wm9712 = {
 	.name = "tegra-wm9712",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &tegra_wm9712_dai,
 	.num_links = 1,
sound/soc/tegra/trimslice.c +1 -0
@@ -94,6 +94,7 @@ static struct snd_soc_dai_link trimslice
 
 static struct snd_soc_card snd_soc_trimslice = {
 	.name = "tegra-trimslice",
+	.driver_name = "tegra",
 	.owner = THIS_MODULE,
 	.dai_link = &trimslice_tlv320aic23_dai,
 	.num_links = 1,
author maintainer
#98 lore raw

PATCH 95/122 qemu_fw_cfg: Make fw_cfg_rev_attr a proper kobj_attribute

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

commit fca41af18e10318e4de090db47d9fa7169e1bf2f upstream.

fw_cfg_showrev() is called by an indirect call in kobj_attr_show(), which violates clang's CFI checking because fw_cfg_showrev()'s second parameter is 'struct attribute', whereas the ->show() member of 'struct kobj_structure' expects the second parameter to be of type 'struct kobj_attribute'.

$ cat /sys/firmware/qemu_fw_cfg/rev
3
$ dmesg | grep "CFI failure"
[   26.016832] CFI failure (target: fw_cfg_showrev+0x0/0x8):

Fix this by converting fw_cfg_rev_attr to 'struct kobj_attribute' where this would have been caught automatically by the incompatible pointer types compiler warning. Update fw_cfg_showrev() accordingly.

---
 drivers/firmware/qemu_fw_cfg.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/firmware/qemu_fw_cfg.c +3 -5
@@ -296,15 +296,13 @@ static int fw_cfg_do_platform_probe(stru
 	return 0;
 }
 
-static ssize_t fw_cfg_showrev(struct kobject *k, struct attribute *a, char *buf)
+static ssize_t fw_cfg_showrev(struct kobject *k, struct kobj_attribute *a,
+			      char *buf)
 {
 	return sprintf(buf, "%u\n", fw_cfg_rev);
 }
 
-static const struct {
-	struct attribute attr;
-	ssize_t (*show)(struct kobject *k, struct attribute *a, char *buf);
-} fw_cfg_rev_attr = {
+static const struct kobj_attribute fw_cfg_rev_attr = {
 	.attr = { .name = "rev", .mode = S_IRUSR },
 	.show = fw_cfg_showrev,
 };
author maintainer
#99 lore raw

PATCH 96/122 ipmi/watchdog: Stop watchdog timer when the current action is none

In reply to Greg Kroah-Hartman

From: Petr Pavlu <[email protected]>

commit 2253042d86f57d90a621ac2513a7a7a13afcf809 upstream.

When an IPMI watchdog timer is being stopped in ipmi_close() or ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called to install this action. The latter function ends up invoking __ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI request.

For IPMI 1.0, this operation results in fully stopping the watchdog timer. For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes that the watchdog timer has its action correctly updated to 'none' but the timer continues to run. A problem is that IPMI firmware can then still log an expiration event when the configured timeout is reached, which is unexpected because the watchdog timer was requested to be stopped.

The patch fixes this problem by not setting the "don't stop" flag in __ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which results in stopping the watchdog timer. This makes the behaviour for IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in __ipmi_heartbeat() which does not allow to reset the watchdog if the current action is WDOG_TIMEOUT_NONE as that would start the timer.

Message-Id: <[email protected]>

---
 drivers/char/ipmi/ipmi_watchdog.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/char/ipmi/ipmi_watchdog.c +12 -10
@@ -366,16 +366,18 @@ static int __ipmi_set_timeout(struct ipm
 	data[0] = 0;
 	WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS);
 
-	if ((ipmi_version_major > 1)
-	    || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
-		/* This is an IPMI 1.5-only feature. */
-		data[0] |= WDOG_DONT_STOP_ON_SET;
-	} else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
-		/*
-		 * In ipmi 1.0, setting the timer stops the watchdog, we
-		 * need to start it back up again.
-		 */
-		hbnow = 1;
+	if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
+		if ((ipmi_version_major > 1) ||
+		    ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
+			/* This is an IPMI 1.5-only feature. */
+			data[0] |= WDOG_DONT_STOP_ON_SET;
+		} else {
+			/*
+			 * In ipmi 1.0, setting the timer stops the watchdog, we
+			 * need to start it back up again.
+			 */
+			hbnow = 1;
+		}
 	}
 
 	data[1] = 0;
author maintainer
#100 lore raw

PATCH 97/122 xfrm: policy: Read seqcount outside of rcu-read side in xfrm_policy_lookup_bytype

In reply to Greg Kroah-Hartman

From: Varad Gautam <[email protected]>

commit d7b0408934c749f546b01f2b33d07421a49b6f3e upstream.

xfrm_policy_lookup_bytype loops on seqcount mutex xfrm_policy_hash_generation within an RCU read side critical section. Although ill advised, this is fine if the loop is bounded.

xfrm_policy_hash_generation wraps mutex hash_resize_mutex, which is used to serialize writers (xfrm_hash_resize, xfrm_hash_rebuild). This is fine too.

On PREEMPT_RT=y, the read_seqcount_begin call within xfrm_policy_lookup_bytype emits a mutex lock/unlock for hash_resize_mutex. Mutex locking is fine, since RCU read side critical sections are allowed to sleep with PREEMPT_RT.

xfrm_hash_resize can, however, block on synchronize_rcu while holding hash_resize_mutex.

This leads to the following situation on PREEMPT_RT, where the writer is blocked on RCU grace period expiry, while the reader is blocked on a lock held by the writer:

Thead 1 (xfrm_hash_resize) Thread 2 (xfrm_policy_lookup_bytype)

				rcu_read_lock();
mutex_lock(&hash_resize_mutex);
				read_seqcount_begin(&xfrm_policy_hash_generation);
				mutex_lock(&hash_resize_mutex); // block

xfrm_bydst_resize();
synchronize_rcu(); // block
<RCU stalls in xfrm_policy_lookup_bytype>

Move the read_seqcount_begin call outside of the RCU read side critical section, and do an rcu_read_unlock/retry if we got stale data within the critical section.

On non-PREEMPT_RT, this shortens the time spent within RCU read side critical section in case the seqcount needs a retry, and avoids unbounded looping.

Fixes 77cc278f7b20 ("xfrm: policy: Use sequence counters with associated lock")
Cc linux-rt-users <[email protected]>
Cc Steffen Klassert <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Florian Westphal <[email protected]>
Cc "Ahmed S. Darwish" <[email protected]>
---
 net/xfrm/xfrm_policy.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
net/xfrm/xfrm_policy.c +14 -7
@@ -2089,12 +2089,15 @@ static struct xfrm_policy *xfrm_policy_l
 	if (unlikely(!daddr || !saddr))
 		return NULL;
 
-	rcu_read_lock();
  retry:
-	do {
-		sequence = read_seqcount_begin(&xfrm_policy_hash_generation);
-		chain = policy_hash_direct(net, daddr, saddr, family, dir);
-	} while (read_seqcount_retry(&xfrm_policy_hash_generation, sequence));
+	sequence = read_seqcount_begin(&xfrm_policy_hash_generation);
+	rcu_read_lock();
+
+	chain = policy_hash_direct(net, daddr, saddr, family, dir);
+	if (read_seqcount_retry(&xfrm_policy_hash_generation, sequence)) {
+		rcu_read_unlock();
+		goto retry;
+	}
 
 	ret = NULL;
 	hlist_for_each_entry_rcu(pol, chain, bydst) {
@@ -2125,11 +2128,15 @@ static struct xfrm_policy *xfrm_policy_l
 	}
 
 skip_inexact:
-	if (read_seqcount_retry(&xfrm_policy_hash_generation, sequence))
+	if (read_seqcount_retry(&xfrm_policy_hash_generation, sequence)) {
+		rcu_read_unlock();
 		goto retry;
+	}
 
-	if (ret && !xfrm_pol_hold_rcu(ret))
+	if (ret && !xfrm_pol_hold_rcu(ret)) {
+		rcu_read_unlock();
 		goto retry;
+	}
 fail:
 	rcu_read_unlock();
 
author maintainer
#103 lore raw

PATCH 98/122 thermal/drivers/int340x/processor_thermal: Fix tcc setting

In reply to Greg Kroah-Hartman

From: Srinivas Pandruvada <[email protected]>

commit fe6a6de6692e7f7159c1ff42b07ecd737df712b4 upstream.

The following fixes are done for tcc sysfs interface:
- TCC is 6 bits only from bit 29-24
- TCC of 0 is valid
- When BIT(31) is set, this register is read only
- Check for invalid tcc value
- Error for negative values

Fixes fdf4f2fb8e899 ("drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset")
---
 drivers/thermal/intel/int340x_thermal/processor_thermal_device.c |   20 ++++++----
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +12 -8
@@ -150,24 +150,27 @@ static ssize_t tcc_offset_degree_celsius
 	if (err)
 		return err;
 
-	val = (val >> 24) & 0xff;
+	val = (val >> 24) & 0x3f;
 	return sprintf(buf, "%d\n", (int)val);
 }
 
-static int tcc_offset_update(int tcc)
+static int tcc_offset_update(unsigned int tcc)
 {
 	u64 val;
 	int err;
 
-	if (!tcc)
+	if (tcc > 63)
 		return -EINVAL;
 
 	err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
 	if (err)
 		return err;
 
-	val &= ~GENMASK_ULL(31, 24);
-	val |= (tcc & 0xff) << 24;
+	if (val & BIT(31))
+		return -EPERM;
+
+	val &= ~GENMASK_ULL(29, 24);
+	val |= (tcc & 0x3f) << 24;
 
 	err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val);
 	if (err)
@@ -176,14 +179,15 @@ static int tcc_offset_update(int tcc)
 	return 0;
 }
 
-static int tcc_offset_save;
+static unsigned int tcc_offset_save;
 
 static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
 				struct device_attribute *attr, const char *buf,
 				size_t count)
 {
+	unsigned int tcc;
 	u64 val;
-	int tcc, err;
+	int err;
 
 	err = rdmsrl_safe(MSR_PLATFORM_INFO, &val);
 	if (err)
@@ -192,7 +196,7 @@ static ssize_t tcc_offset_degree_celsius
 	if (!(val & BIT(30)))
 		return -EACCES;
 
-	if (kstrtoint(buf, 0, &tcc))
+	if (kstrtouint(buf, 0, &tcc))
 		return -EINVAL;
 
 	err = tcc_offset_update(tcc);
author maintainer
#104 lore raw

PATCH 99/122 ubifs: Fix races between xattr_{set|get} and listxattr operations

In reply to Greg Kroah-Hartman

From: Zhihao Cheng <[email protected]>

commit f4e3634a3b642225a530c292fdb1e8a4007507f5 upstream.

UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1].

Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4.

[1] https://lore.kernel.org/linux-mtd/[email protected]

Fixes 1e51764a3c2ac05a23 ("UBIFS: add new flash file system")
---
 fs/ubifs/super.c |    1 +
 fs/ubifs/ubifs.h |    2 ++
 fs/ubifs/xattr.c |   44 +++++++++++++++++++++++++++++++++-----------
 3 files changed, 36 insertions(+), 11 deletions(-)
fs/ubifs/super.c +1 -0
@@ -257,6 +257,7 @@ static struct inode *ubifs_alloc_inode(s
 	memset((void *)ui + sizeof(struct inode), 0,
 	       sizeof(struct ubifs_inode) - sizeof(struct inode));
 	mutex_init(&ui->ui_mutex);
+	init_rwsem(&ui->xattr_sem);
 	spin_lock_init(&ui->ui_lock);
 	return &ui->vfs_inode;
 };
fs/ubifs/ubifs.h +2 -0
@@ -356,6 +356,7 @@ struct ubifs_gced_idx_leb {
  * @ui_mutex: serializes inode write-back with the rest of VFS operations,
  *            serializes "clean <-> dirty" state changes, serializes bulk-read,
  *            protects @dirty, @bulk_read, @ui_size, and @xattr_size
+ * @xattr_sem: serilizes write operations (remove|set|create) on xattr
  * @ui_lock: protects @synced_i_size
  * @synced_i_size: synchronized size of inode, i.e. the value of inode size
  *                 currently stored on the flash; used only for regular file
@@ -409,6 +410,7 @@ struct ubifs_inode {
 	unsigned int bulk_read:1;
 	unsigned int compr_type:2;
 	struct mutex ui_mutex;
+	struct rw_semaphore xattr_sem;
 	spinlock_t ui_lock;
 	loff_t synced_i_size;
 	loff_t ui_size;
fs/ubifs/xattr.c +33 -11

146 lines not on this page · raw message

author maintainer
#76 lore raw

PATCH 73/122 crypto: ccp - Annotate SEV Firmware file names

In reply to Greg Kroah-Hartman

From: Joerg Roedel <[email protected]>

commit c8671c7dc7d51125ab9f651697866bf4a9132277 upstream.

Annotate the firmware files CCP might need using MODULE_FIRMWARE(). This will get them included into an initrd when CCP is also included there. Otherwise the CCP module will not find its firmware when loaded before the root-fs is mounted.
This can cause problems when the pre-loaded SEV firmware is too old to support current SEV and SEV-ES virtualization features.

Fixes e93720606efd ("crypto: ccp - Allow SEV firmware to be chosen based on Family and Model")
Cc [email protected] # v4.20+
---
 drivers/crypto/ccp/psp-dev.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/crypto/ccp/psp-dev.c +4 -0
@@ -40,6 +40,10 @@ static int psp_probe_timeout = 5;
 module_param(psp_probe_timeout, int, 0644);
 MODULE_PARM_DESC(psp_probe_timeout, " default timeout value, in seconds, during PSP device probe");
 
+MODULE_FIRMWARE("amd/amd_sev_fam17h_model0xh.sbin"); /* 1st gen EPYC */
+MODULE_FIRMWARE("amd/amd_sev_fam17h_model3xh.sbin"); /* 2nd gen EPYC */
+MODULE_FIRMWARE("amd/amd_sev_fam19h_model0xh.sbin"); /* 3rd gen EPYC */
+
 static bool psp_dead;
 static int psp_timeout;
 
author maintainer
#107 lore raw

PATCH 102/122 extcon: intel-mrfld: Sync hardware and software state on init

In reply to Greg Kroah-Hartman

From: Ferry Toth <[email protected]>

commit ecb5bdff901139850fb3ca3ae2d0cccac045bc52 upstream.

extcon driver for Basin Cove PMIC shadows the switch status used for dwc3 DRD to detect a change in the switch position. This change initializes the status at probe time.

Fixes 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC")
---
 drivers/extcon/extcon-intel-mrfld.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/extcon/extcon-intel-mrfld.c +9 -0
@@ -197,6 +197,7 @@ static int mrfld_extcon_probe(struct pla
 	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
 	struct regmap *regmap = pmic->regmap;
 	struct mrfld_extcon_data *data;
+	unsigned int status;
 	unsigned int id;
 	int irq, ret;
 
@@ -244,6 +245,14 @@ static int mrfld_extcon_probe(struct pla
 	/* Get initial state */
 	mrfld_extcon_role_detect(data);
 
+	/*
+	 * Cached status value is used for cable detection, see comments
+	 * in mrfld_extcon_cable_detect(), we need to sync cached value
+	 * with a real state of the hardware.
+	 */
+	regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+	data->status = status;
+
 	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
 	mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
 
author maintainer
#108 lore raw

PATCH 103/122 seq_buf: Fix overflow in seq_buf_putmem_hex()

In reply to Greg Kroah-Hartman

From: Yun Zhou <[email protected]>

commit d3b16034a24a112bb83aeb669ac5b9b01f744bb7 upstream.

There's two variables being increased in that loop (i and j), and i follows the raw data, and j follows what is being written into the buffer. We should compare 'i' to MAX_MEMHEX_BYTES or compare 'j' to HEX_CHARS. Otherwise, if 'j' goes bigger than HEX_CHARS, it will overflow the destination buffer.

Fixes 5e3ca0ec76fce ("ftrace: introduce the "hex" output method")
---
 lib/seq_buf.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
lib/seq_buf.c +3 -1
@@ -228,8 +228,10 @@ int seq_buf_putmem_hex(struct seq_buf *s
 
 	WARN_ON(s->size == 0);
 
+	BUILD_BUG_ON(MAX_MEMHEX_BYTES * 2 >= HEX_CHARS);
+
 	while (len) {
-		start_len = min(len, HEX_CHARS - 1);
+		start_len = min(len, MAX_MEMHEX_BYTES);
 #ifdef __BIG_ENDIAN
 		for (i = 0, j = 0; i < start_len; i++) {
 #else
author maintainer
#110 lore raw

PATCH 105/122 tracing: Simplify & fix saved_tgids logic

In reply to Greg Kroah-Hartman

From: Paul Burton <[email protected]>

commit b81b3e959adb107cd5b36c7dc5ba1364bbd31eb2 upstream.

The tgid_map array records a mapping from pid to tgid, where the index of an entry within the array is the pid & the value stored at that index is the tgid.

The saved_tgids_next() function iterates over pointers into the tgid_map array & dereferences the pointers which results in the tgid, but then it passes that dereferenced value to trace_find_tgid() which treats it as a pid & does a further lookup within the tgid_map array. It seems likely that the intent here was to skip over entries in tgid_map for which the recorded tgid is zero, but instead we end up skipping over entries for which the thread group leader hasn't yet had its own tgid recorded in tgid_map.

A minimal fix would be to remove the call to trace_find_tgid, turning:

if (trace_find_tgid(*ptr))

into:

if (*ptr)

..but it seems like this logic can be much simpler if we simply let seq_read() iterate over the whole tgid_map array & filter out empty entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that approach, removing the incorrect logic here entirely.

Fixes d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc Ingo Molnar <[email protected]>
Cc Joel Fernandes <[email protected]>
---
 kernel/trace/trace.c |   38 +++++++++++++-------------------------
 1 file changed, 13 insertions(+), 25 deletions(-)
kernel/trace/trace.c +13 -25
@@ -5013,37 +5013,20 @@ static const struct file_operations trac
 
 static void *saved_tgids_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	int *ptr = v;
+	int pid = ++(*pos);
 
-	if (*pos || m->count)
-		ptr++;
-
-	(*pos)++;
-
-	for (; ptr <= &tgid_map[PID_MAX_DEFAULT]; ptr++) {
-		if (trace_find_tgid(*ptr))
-			return ptr;
-	}
+	if (pid > PID_MAX_DEFAULT)
+		return NULL;
 
-	return NULL;
+	return &tgid_map[pid];
 }
 
 static void *saved_tgids_start(struct seq_file *m, loff_t *pos)
 {
-	void *v;
-	loff_t l = 0;
-
-	if (!tgid_map)
+	if (!tgid_map || *pos > PID_MAX_DEFAULT)
 		return NULL;
 
-	v = &tgid_map[0];
-	while (l <= *pos) {
-		v = saved_tgids_next(m, v, &l);
-		if (!v)
-			return NULL;
-	}
-
-	return v;
+	return &tgid_map[*pos];
 }
 
 static void saved_tgids_stop(struct seq_file *m, void *v)
@@ -5052,9 +5035,14 @@ static void saved_tgids_stop(struct seq_
 
 static int saved_tgids_show(struct seq_file *m, void *v)
 {
-	int pid = (int *)v - tgid_map;
+	int *entry = (int *)v;
+	int pid = entry - tgid_map;
+	int tgid = *entry;
+
+	if (tgid == 0)
+		return SEQ_SKIP;
 
-	seq_printf(m, "%d %d\n", pid, trace_find_tgid(pid));
+	seq_printf(m, "%d %d\n", pid, tgid);
 	return 0;
 }
 
author maintainer
#109 lore raw

PATCH 104/122 rq-qos: fix missed wake-ups in rq_qos_throttle try two

In reply to Greg Kroah-Hartman

From: Jan Kara <[email protected]>

commit 11c7aa0ddea8611007768d3e6b58d45dc60a19e1 upstream.

Commit 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle") tried to fix a problem that a process could be sleeping in rq_qos_wait() without anyone to wake it up. However the fix is not complete and the following can still happen:

CPU1 (waiter1) CPU2 (waiter2) CPU3 (waker)
rq_qos_wait() rq_qos_wait()
acquire_inflight_cb() -> fails

			  acquire_inflight_cb() -> fails

						completes IOs, inflight
						  decreased
  prepare_to_wait_exclusive()
			  prepare_to_wait_exclusive()
  has_sleeper = !wq_has_single_sleeper() -> true as there are two sleepers
			  has_sleeper = !wq_has_single_sleeper() -> true

io_schedule() io_schedule()

Deadlock as now there's nobody to wakeup the two waiters. The logic automatically blocking when there are already sleepers is really subtle and the only way to make it work reliably is that we check whether there are some waiters in the queue when adding ourselves there. That way, we are guaranteed that at least the first process to enter the wait queue will recheck the waiting condition before going to sleep and thus guarantee forward progress.

Fixes 545fbd0775ba ("rq-qos: fix missed wake-ups in rq_qos_throttle")
---
 block/blk-rq-qos.c   |    4 ++--
 include/linux/wait.h |    2 +-
 kernel/sched/wait.c  |    9 +++++++--
 3 files changed, 10 insertions(+), 5 deletions(-)
block/blk-rq-qos.c +2 -2
@@ -266,8 +266,8 @@ void rq_qos_wait(struct rq_wait *rqw, vo
 	if (!has_sleeper && acquire_inflight_cb(rqw, private_data))
 		return;
 
-	prepare_to_wait_exclusive(&rqw->wait, &data.wq, TASK_UNINTERRUPTIBLE);
-	has_sleeper = !wq_has_single_sleeper(&rqw->wait);
+	has_sleeper = !prepare_to_wait_exclusive(&rqw->wait, &data.wq,
+						 TASK_UNINTERRUPTIBLE);
 	do {
 		/* The memory barrier in set_task_state saves us here. */
 		if (data.got_token)
include/linux/wait.h +1 -1
@@ -1121,7 +1121,7 @@ do {										\
  * Waitqueues which are removed from the waitqueue_head at wakeup time
  */
 void prepare_to_wait(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state);
-void prepare_to_wait_exclusive(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state);
+bool prepare_to_wait_exclusive(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state);
 long prepare_to_wait_event(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state);
 void finish_wait(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry);
 long wait_woken(struct wait_queue_entry *wq_entry, unsigned mode, long timeout);
kernel/sched/wait.c +7 -2
@@ -232,17 +232,22 @@ prepare_to_wait(struct wait_queue_head *
 }
 EXPORT_SYMBOL(prepare_to_wait);
 
-void
+/* Returns true if we are the first waiter in the queue, false otherwise. */
+bool
 prepare_to_wait_exclusive(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state)
 {
 	unsigned long flags;
+	bool was_empty = false;
 
 	wq_entry->flags |= WQ_FLAG_EXCLUSIVE;
 	spin_lock_irqsave(&wq_head->lock, flags);
-	if (list_empty(&wq_entry->entry))
+	if (list_empty(&wq_entry->entry)) {
+		was_empty = list_empty(&wq_head->head);
 		__add_wait_queue_entry_tail(wq_head, wq_entry);
+	}
 	set_current_state(state);
 	spin_unlock_irqrestore(&wq_head->lock, flags);
+	return was_empty;
 }
 EXPORT_SYMBOL(prepare_to_wait_exclusive);
 
author maintainer
#106 lore raw

PATCH 101/122 nvmem: core: add a missing of_node_put

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

commit 63879e2964bceee2aa5bbe8b99ea58bba28bb64f upstream.

'for_each_child_of_node' performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put.

---
 drivers/nvmem/core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/nvmem/core.c +6 -3
@@ -318,15 +318,17 @@ static int nvmem_add_cells_from_of(struc
 			continue;
 		if (len < 2 * sizeof(u32)) {
 			dev_err(dev, "nvmem: invalid reg on %pOF\n", child);
+			of_node_put(child);
 			return -EINVAL;
 		}
 
 		cell = kzalloc(sizeof(*cell), GFP_KERNEL);
-		if (!cell)
+		if (!cell) {
+			of_node_put(child);
 			return -ENOMEM;
+		}
 
 		cell->nvmem = nvmem;
-		cell->np = of_node_get(child);
 		cell->offset = be32_to_cpup(addr++);
 		cell->bytes = be32_to_cpup(addr);
 		cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
@@ -347,11 +349,12 @@ static int nvmem_add_cells_from_of(struc
 				cell->name, nvmem->stride);
 			/* Cells already added will be freed later. */
 			kfree_const(cell->name);
-			of_node_put(cell->np);
 			kfree(cell);
+			of_node_put(child);
 			return -EINVAL;
 		}
 
+		cell->np = of_node_get(child);
 		nvmem_cell_add(cell);
 	}
 
author maintainer
#105 lore raw

PATCH 100/122 power: supply: ab8500: Fix an old bug

In reply to Greg Kroah-Hartman

From: Linus Walleij <[email protected]>

commit f1c74a6c07e76fcb31a4bcc1f437c4361a2674ce upstream.

Trying to get the AB8500 charging driver working I ran into a bit of bitrot: we haven't used the driver for a while so errors in refactorings won't be noticed.

This one is pretty self evident: use argument to the macro or we end up with a random pointer to something else.

Cc Krzysztof Kozlowski <[email protected]>
Cc Marcus Cooper <[email protected]>
Fixes 297d716f6260 ("power_supply: Change ownership from driver to core")
---
 include/linux/mfd/abx500/ux500_chargalg.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/mfd/abx500/ux500_chargalg.h +1 -1
@@ -15,7 +15,7 @@
  * - POWER_SUPPLY_TYPE_USB,
  * because only them store as drv_data pointer to struct ux500_charger.
  */
-#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy)
+#define psy_to_ux500_charger(x) power_supply_get_drvdata(x)
 
 /* Forward declaration */
 struct ux500_charger;
author maintainer
#111 lore raw

PATCH 106/122 tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT

In reply to Greg Kroah-Hartman

From: Paul Burton <[email protected]>

commit 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 upstream.

Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that on systems where pid_max is configured higher than PID_MAX_DEFAULT the ftrace record-tgid option doesn't work so well. Any tasks with PIDs higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and don't show up in the saved_tgids file.

In particular since systemd v243 & above configure pid_max to its highest possible 1<<22 value by default on 64 bit systems this renders the record-tgids option of little use.

Increase the size of tgid_map to the configured pid_max instead, allowing it to cover the full range of PIDs up to the maximum value of PID_MAX_LIMIT if the system is configured that way.

On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in memory overhead sounds significant 64 bit systems are presumably best placed to accommodate it, and since tgid_map is only allocated when the record-tgid option is actually used presumably the user would rather it spends sufficient memory to actually record the tgids they expect.

The size of tgid_map could also increase for CONFIG_BASE_SMALL=y configurations, but these seem unlikely to be systems upon which people are both configuring a large pid_max and running ftrace with record-tgid anyway.

Of note is that we only allocate tgid_map once, the first time that the record-tgid option is enabled. Therefore its size is only set once, to the value of pid_max at the time the record-tgid option is first enabled. If a user increases pid_max after that point, the saved_tgids file will not contain entries for any tasks with pids beyond the earlier value of pid_max.

Fixes d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc Ingo Molnar <[email protected]>
Cc Joel Fernandes <[email protected]>
[ Fixed comment coding style ]
---
 kernel/trace/trace.c |   63 ++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 47 insertions(+), 16 deletions(-)
kernel/trace/trace.c +47 -16
@@ -1934,8 +1934,15 @@ void tracing_reset_all_online_cpus(void)
 	}
 }
 
+/*
+ * The tgid_map array maps from pid to tgid; i.e. the value stored at index i
+ * is the tgid last observed corresponding to pid=i.
+ */
 static int *tgid_map;
 
+/* The maximum valid index into tgid_map. */
+static size_t tgid_map_max;
+
 #define SAVED_CMDLINES_DEFAULT 128
 #define NO_CMDLINE_MAP UINT_MAX
 static arch_spinlock_t trace_cmdline_lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -2208,24 +2215,41 @@ void trace_find_cmdline(int pid, char co
 	preempt_enable();
 }
 
+static int *trace_find_tgid_ptr(int pid)
+{
+	/*
+	 * Pairs with the smp_store_release in set_tracer_flag() to ensure that
+	 * if we observe a non-NULL tgid_map then we also observe the correct
+	 * tgid_map_max.
+	 */
+	int *map = smp_load_acquire(&tgid_map);
+
+	if (unlikely(!map || pid > tgid_map_max))
+		return NULL;
+
+	return &map[pid];
+}
+
 int trace_find_tgid(int pid)
 {
-	if (unlikely(!tgid_map || !pid || pid > PID_MAX_DEFAULT))
-		return 0;
+	int *ptr = trace_find_tgid_ptr(pid);
 
-	return tgid_map[pid];
+	return ptr ? *ptr : 0;
 }
 
 static int trace_save_tgid(struct task_struct *tsk)
 {
+	int *ptr;
+
 	/* treat recording of idle task as a success */
 	if (!tsk->pid)
 		return 1;
 
-	if (unlikely(!tgid_map || tsk->pid > PID_MAX_DEFAULT))
+	ptr = trace_find_tgid_ptr(tsk->pid);
+	if (!ptr)
 		return 0;
 
-	tgid_map[tsk->pid] = tsk->tgid;
+	*ptr = tsk->tgid;
 	return 1;
 }
 
@@ -4583,6 +4607,8 @@ int trace_keep_overwrite(struct tracer *
 
 int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled)
 {
+	int *map;
+
 	if ((mask == TRACE_ITER_RECORD_TGID) ||
 	    (mask == TRACE_ITER_RECORD_CMD))
 		lockdep_assert_held(&event_mutex);
@@ -4605,10 +4631,19 @@ int set_tracer_flag(struct trace_array *
 		trace_event_enable_cmd_record(enabled);
 
 	if (mask == TRACE_ITER_RECORD_TGID) {
-		if (!tgid_map)
-			tgid_map = kvcalloc(PID_MAX_DEFAULT + 1,
-					   sizeof(*tgid_map),
-					   GFP_KERNEL);
+		if (!tgid_map) {
+			tgid_map_max = pid_max;
+			map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map),
+				       GFP_KERNEL);
+
+			/*
+			 * Pairs with smp_load_acquire() in
+			 * trace_find_tgid_ptr() to ensure that if it observes
+			 * the tgid_map we just allocated then it also observes
+			 * the corresponding tgid_map_max value.
+			 */
+			smp_store_release(&tgid_map, map);
+		}
 		if (!tgid_map) {
 			tr->trace_flags &= ~TRACE_ITER_RECORD_TGID;
 			return -ENOMEM;
@@ -5015,18 +5050,14 @@ static void *saved_tgids_next(struct seq
 {
 	int pid = ++(*pos);
 
-	if (pid > PID_MAX_DEFAULT)
-		return NULL;
-
-	return &tgid_map[pid];
+	return trace_find_tgid_ptr(pid);
 }
 
 static void *saved_tgids_start(struct seq_file *m, loff_t *pos)
 {
-	if (!tgid_map || *pos > PID_MAX_DEFAULT)
-		return NULL;
+	int pid = *pos;
 
-	return &tgid_map[*pos];
+	return trace_find_tgid_ptr(pid);
 }
 
 static void saved_tgids_stop(struct seq_file *m, void *v)
author maintainer
#112 lore raw

PATCH 107/122 ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe

In reply to Greg Kroah-Hartman

From: Lv Yunlong <[email protected]>

commit 9272e5d0028d45a3b45b58c9255e6e0df53f7ad9 upstream.

In the out_err_bus_register error branch of tpci200_pci_probe, tpci200->info->cfg_regs is freed by tpci200_uninstall()-> tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs) in the first time.

But later, iounmap() is called to free tpci200->info->cfg_regs again.

My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall() to avoid the double free.

Fixes cea2f7cdff2af ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode")
Cc stable <[email protected]>
---
 drivers/ipack/carriers/tpci200.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/ipack/carriers/tpci200.c +4 -1
@@ -596,8 +596,11 @@ static int tpci200_pci_probe(struct pci_
 
 out_err_bus_register:
 	tpci200_uninstall(tpci200);
+	/* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */
+	tpci200->info->cfg_regs = NULL;
 out_err_install:
-	iounmap(tpci200->info->cfg_regs);
+	if (tpci200->info->cfg_regs)
+		iounmap(tpci200->info->cfg_regs);
 out_err_ioremap:
 	pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
 out_err_pci_request:
author maintainer
#113 lore raw

PATCH 108/122 coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer()

In reply to Greg Kroah-Hartman

From: Sai Prakash Ranjan <[email protected]>

commit 5fae8a946ac2df879caf3f79a193d4766d00239b upstream.

commit 6f755e85c332 ("coresight: Add helper for inserting synchronization packets") removed trailing '\0' from barrier_pkt array and updated the call sites like etb_update_buffer() to have proper checks for barrier_pkt size before read but missed updating tmc_update_etf_buffer() which still reads barrier_pkt past the array size resulting in KASAN out-of-bounds bug. Fix this by adding a check for barrier_pkt size before accessing like it is done in etb_update_buffer().

 BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698
 Read of size 4 at addr ffffffd05b7d1030 by task perf/2629

 Call trace:
  dump_backtrace+0x0/0x27c
  show_stack+0x20/0x2c
  dump_stack+0x11c/0x188
  print_address_description+0x3c/0x4a4
  __kasan_report+0x140/0x164
  kasan_report+0x10/0x18
  __asan_report_load4_noabort+0x1c/0x24
  tmc_update_etf_buffer+0x4b8/0x698
  etm_event_stop+0x248/0x2d8
  etm_event_del+0x20/0x2c
  event_sched_out+0x214/0x6f0
  group_sched_out+0xd0/0x270
  ctx_sched_out+0x2ec/0x518
  __perf_event_task_sched_out+0x4fc/0xe6c
  __schedule+0x1094/0x16a0
  preempt_schedule_irq+0x88/0x170
  arm64_preempt_schedule_irq+0xf0/0x18c
  el1_irq+0xe8/0x180
  perf_event_exec+0x4d8/0x56c
  setup_new_exec+0x204/0x400
  load_elf_binary+0x72c/0x18c0
  search_binary_handler+0x13c/0x420
  load_script+0x500/0x6c4
  search_binary_handler+0x13c/0x420
  exec_binprm+0x118/0x654
  __do_execve_file+0x77c/0xba4
  __arm64_compat_sys_execve+0x98/0xac
  el0_svc_common+0x1f8/0x5e0
  el0_svc_compat_handler+0x84/0xb0
  el0_svc_compat+0x10/0x50

 The buggy address belongs to the variable:
  barrier_pkt+0x10/0x40

 Memory state around the buggy address:
  ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
  ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03
                                      ^
  ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa
  ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa
 ==================================================================
---
 drivers/hwtracing/coresight/coresight-tmc-etf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwtracing/coresight/coresight-tmc-etf.c +1 -1
@@ -528,7 +528,7 @@ static unsigned long tmc_update_etf_buff
 		buf_ptr = buf->data_pages[cur] + offset;
 		*buf_ptr = readl_relaxed(drvdata->base + TMC_RRD);
 
-		if (lost && *barrier) {
+		if (lost && i < CORESIGHT_BARRIER_PKT_SIZE) {
 			*buf_ptr = *barrier;
 			barrier++;
 		}
author maintainer
#116 lore raw

PATCH 111/122 PCI: aardvark: Fix checking for PIO Non-posted Request

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 8ceeac307a79f68c0d0c72d6e48b82fa424204ec upstream.

PIO_NON_POSTED_REQ for PIO_STAT register is incorrectly defined. Bit 10 in register PIO_STAT indicates the response is to a non-posted request.

---
 drivers/pci/controller/pci-aardvark.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +1 -1
@@ -61,7 +61,7 @@
 #define   PIO_COMPLETION_STATUS_UR		1
 #define   PIO_COMPLETION_STATUS_CRS		2
 #define   PIO_COMPLETION_STATUS_CA		4
-#define   PIO_NON_POSTED_REQ			BIT(0)
+#define   PIO_NON_POSTED_REQ			BIT(10)
 #define PIO_ADDR_LS				(PIO_BASE_ADDR + 0x8)
 #define PIO_ADDR_MS				(PIO_BASE_ADDR + 0xc)
 #define PIO_WR_DATA				(PIO_BASE_ADDR + 0x10)
author maintainer
#115 lore raw

PATCH 110/122 PCI: Leave Apple Thunderbolt controllers on for s2idle or standby

In reply to Greg Kroah-Hartman

From: Konstantin Kharlamov <[email protected]>

commit 4694ae373dc2114f9a82f6ae15737e65af0c6dea upstream.

On Macbook 2013, resuming from suspend-to-idle or standby resulted in the external monitor no longer being detected, a stacktrace, and errors like this in dmesg:

pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)

The reason is that we know how to turn power to the Thunderbolt controller *off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power back on. We have to rely on firmware to turn the power back on.

When going to the "suspend-to-idle" or "standby" system sleep states, firmware is not involved either on the suspend side or the resume side, so we can't use SXIO/SXFP/SXLF to turn the power off.

Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when we're going to the "suspend-to-idle" or "standby" system sleep states.

Fixes 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt")

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767

---
 drivers/pci/quirks.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/pci/quirks.c +11 -0
@@ -27,6 +27,7 @@
 #include <linux/nvme.h>
 #include <linux/platform_data/x86/apple.h>
 #include <linux/pm_runtime.h>
+#include <linux/suspend.h>
 #include <linux/switchtec.h>
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
@@ -3667,6 +3668,16 @@ static void quirk_apple_poweroff_thunder
 		return;
 	if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)
 		return;
+
+	/*
+	 * SXIO/SXFP/SXLF turns off power to the Thunderbolt controller.
+	 * We don't know how to turn it back on again, but firmware does,
+	 * so we can only use SXIO/SXFP/SXLF if we're suspending via
+	 * firmware.
+	 */
+	if (!pm_suspend_via_firmware())
+		return;
+
 	bridge = ACPI_HANDLE(&dev->dev);
 	if (!bridge)
 		return;
author maintainer
#77 lore raw

PATCH 74/122 perf bench: Fix 2 memory sanitizer warnings

In reply to Greg Kroah-Hartman

From: Ian Rogers <[email protected]>

commit d2c73501a767514b6c85c7feff9457a165d51057 upstream.

Memory sanitizer warns if a write is performed where the memory being read for the write is uninitialized. Avoid this warning by initializing the memory.

---
 tools/perf/bench/sched-messaging.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/perf/bench/sched-messaging.c +2 -2
@@ -66,11 +66,10 @@ static void fdpair(int fds[2])
 /* Block until we're ready to go */
 static void ready(int ready_out, int wakefd)
 {
-	char dummy;
 	struct pollfd pollfd = { .fd = wakefd, .events = POLLIN };
 
 	/* Tell them we're ready. */
-	if (write(ready_out, &dummy, 1) != 1)
+	if (write(ready_out, "R", 1) != 1)
 		err(EXIT_FAILURE, "CLIENT: ready write");
 
 	/* Wait for "GO" signal */
@@ -85,6 +84,7 @@ static void *sender(struct sender_contex
 	unsigned int i, j;
 
 	ready(ctx->ready_out, ctx->wakefd);
+	memset(data, 'S', sizeof(data));
 
 	/* Now pump to every receiver. */
 	for (i = 0; i < nr_loops; i++) {
author maintainer
#114 lore raw

PATCH 109/122 dm btree remove: assign new_root only when removal succeeds

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

commit b6e58b5466b2959f83034bead2e2e1395cca8aeb upstream.

remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove().

For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below:

  general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
  CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
  Hardware name: QEMU Standard PC
  RIP: 0010:metadata_ll_load_ie+0x14/0x30
  Call Trace:
   sm_metadata_count_is_more_than_one+0xb9/0xe0
   dm_tm_shadow_block+0x52/0x1c0
   shadow_step+0x59/0xf0
   remove_raw+0xb2/0x170
   dm_btree_remove+0xf4/0x1c0
   dm_pool_delete_thin_device+0xc3/0x140
   pool_message+0x218/0x2b0
   target_message+0x251/0x290
   ctl_ioctl+0x1c4/0x4d0
   dm_ctl_ioctl+0xe/0x20
   __x64_sys_ioctl+0x7b/0xb0
   do_syscall_64+0x40/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixing it by only assign new_root when removal succeeds

---
 drivers/md/persistent-data/dm-btree-remove.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/md/persistent-data/dm-btree-remove.c +2 -1
@@ -549,7 +549,8 @@ int dm_btree_remove(struct dm_btree_info
 		delete_at(n, index);
 	}
 
-	*new_root = shadow_root(&spine);
+	if (!r)
+		*new_root = shadow_root(&spine);
 	exit_shadow_spine(&spine);
 
 	return r;
author maintainer
#78 lore raw

PATCH 75/122 powerpc/mm: Fix lockup on kernel exec fault

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

commit cd5d5e602f502895e47e18cd46804d6d7014e65c upstream.

The powerpc kernel is not prepared to handle exec faults from kernel. Especially, the function is_exec_fault() will return 'false' when an exec fault is taken by kernel, because the check is based on reading current->thread.regs->trap which contains the trap from user.

For instance, when provoking a LKDTM EXEC_USERSPACE test, current->thread.regs->trap is set to SYSCALL trap (0xc00), and the fault taken by the kernel is not seen as an exec fault by set_access_flags_filter().

Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix with autonuma") made it clear and handled it properly. But later on commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") removed that handling, introducing test based on error_code. And here is the problem, because on the 603 all upper bits of SRR1 get cleared when the TLB instruction miss handler bails out to ISI.

Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy search_exception_tables() verification"), an exec fault from kernel at a userspace address was indirectly caught by the lack of entry for that address in the exception tables. But after that commit the kernel mainly relies on KUAP or on core mm handling to catch wrong user accesses. Here the access is not wrong, so mm handles it. It is a minor fault because PAGE_EXEC is not set, set_access_flags_filter() should set PAGE_EXEC and voila. But as is_exec_fault() returns false as explained in the beginning, set_access_flags_filter() bails out without setting PAGE_EXEC flag, which leads to a forever minor exec fault.

As the kernel is not prepared to handle such exec faults, the thing to do is to fire in bad_kernel_fault() for any exec fault taken by the kernel, as it was prior to commit d3ca587404b3.

---
 arch/powerpc/mm/fault.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
arch/powerpc/mm/fault.c +1 -3
@@ -204,9 +204,7 @@ static bool bad_kernel_fault(struct pt_r
 {
 	int is_exec = TRAP(regs) == 0x400;
 
-	/* NX faults set DSISR_PROTFAULT on the 8xx, DSISR_NOEXEC_OR_G on others */
-	if (is_exec && (error_code & (DSISR_NOEXEC_OR_G | DSISR_KEYFAULT |
-				      DSISR_PROTFAULT))) {
+	if (is_exec) {
 		pr_crit_ratelimited("kernel tried to execute %s page (%lx) - exploit attempt? (uid: %d)\n",
 				    address >= TASK_SIZE ? "exec-protected" : "user",
 				    address,
author maintainer
#79 lore raw

PATCH 76/122 powerpc/barrier: Avoid collision with clangs __lwsync macro

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

commit 015d98149b326e0f1f02e44413112ca8b4330543 upstream.

A change in clang 13 results in the __lwsync macro being defined as __builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what the target supports. This breaks the build because of -Werror in arch/powerpc, along with thousands of warnings:

In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]

 #define __lwsync()      __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
        ^
 <built-in>:308:9: note: previous definition is here
 #define __lwsync __builtin_ppc_lwsync
        ^

1 error generated.

Undefine this macro so that the runtime patching introduced by commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to work properly with clang and the build no longer breaks.

---
 arch/powerpc/include/asm/barrier.h |    2 ++
 1 file changed, 2 insertions(+)
arch/powerpc/include/asm/barrier.h +2 -0
@@ -44,6 +44,8 @@
 #    define SMPWMB      eieio
 #endif
 
+/* clang defines this macro for a builtin, which will not work with runtime patching */
+#undef __lwsync
 #define __lwsync()	__asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
 #define dma_rmb()	__lwsync()
 #define dma_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
author maintainer
#81 lore raw

PATCH 78/122 drm/radeon: Add the missed drm_gem_object_put() in radeon_user_framebuffer_create()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

commit 9ba85914c36c8fed9bf3e8b69c0782908c1247b7 upstream.

radeon_user_framebuffer_create() misses to call drm_gem_object_put() in an error path. Add the missed function call to fix it.

---
 drivers/gpu/drm/radeon/radeon_display.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/radeon/radeon_display.c +1 -0
@@ -1333,6 +1333,7 @@ radeon_user_framebuffer_create(struct dr
 	/* Handle is imported dma-buf, so cannot be migrated to VRAM for scanout */
 	if (obj->import_attach) {
 		DRM_DEBUG_KMS("Cannot create framebuffer from imported dma_buf\n");
+		drm_gem_object_put(obj);
 		return ERR_PTR(-EINVAL);
 	}
 
author maintainer
#80 lore raw

PATCH 77/122 drm/amdgpu: Update NV SIMD-per-CU to 2

In reply to Greg Kroah-Hartman

From: Joseph Greathouse <[email protected]>

commit aa6158112645aae514982ad8d56df64428fcf203 upstream.

Navi series GPUs have 2 SIMDs per CU (and then 2 CUs per WGP). The NV enum headers incorrectly listed this as 4, which later meant we were incorrectly reporting the number of SIMDs in the HSA topology. This could cause problems down the line for user-space applications that want to launch a fixed amount of work to each SIMD.

---
 drivers/gpu/drm/amd/include/navi10_enum.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/include/navi10_enum.h +1 -1
@@ -430,7 +430,7 @@ ARRAY_2D_DEPTH
  */
 
 typedef enum ENUM_NUM_SIMD_PER_CU {
-NUM_SIMD_PER_CU                          = 0x00000004,
+NUM_SIMD_PER_CU                          = 0x00000002,
 } ENUM_NUM_SIMD_PER_CU;
 
 /*
author maintainer
#82 lore raw

PATCH 79/122 drm/rockchip: dsi: remove extra component_del() call

In reply to Greg Kroah-Hartman

From: Thomas Hebb <[email protected]>

commit b354498bbe65c917d521b3b56317ddc9ab217425 upstream.

commit cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support") added this devcnt field and call to component_del(). However, these both appear to be erroneous changes left over from an earlier version of the patch. In the version merged, nothing ever modifies devcnt, meaning component_del() runs unconditionally and in addition to the component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second call fails to delete anything and produces a warning in dmesg.

If we look at the previous version of the patch[1], however, we see that it had logic to calculate devcnt and call component_add() in certain situations. This was removed in v6, and the fact that the deletion code was not appears to have been an oversight.

[1] https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/

---
 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c |    4 ----
 1 file changed, 4 deletions(-)
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c +0 -4
@@ -231,7 +231,6 @@ struct dw_mipi_dsi_rockchip {
 	struct dw_mipi_dsi *dmd;
 	const struct rockchip_dw_dsi_chip_data *cdata;
 	struct dw_mipi_dsi_plat_data pdata;
-	int devcnt;
 };
 
 struct dphy_pll_parameter_map {
@@ -1001,9 +1000,6 @@ static int dw_mipi_dsi_rockchip_remove(s
 {
 	struct dw_mipi_dsi_rockchip *dsi = platform_get_drvdata(pdev);
 
-	if (dsi->devcnt == 0)
-		component_del(dsi->dev, &dw_mipi_dsi_rockchip_ops);
-
 	dw_mipi_dsi_remove(dsi->dmd);
 
 	return 0;
author maintainer
#73 lore raw

PATCH 70/122 MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops

In reply to Greg Kroah-Hartman

From: zhanglianjie <[email protected]>

[ Upstream commit 6817c944430d00f71ccaa9c99ff5b0096aeb7873 ]

The cause of the problem is as follows:
1. when cat /sys/devices/system/memory/memory0/valid_zones, test_pages_in_a_zone() will be called.
2. test_pages_in_a_zone() finds the zone according to stat_pfn = 0. The smallest pfn of the numa node in the mips architecture is 128, and the page corresponding to the previous 0~127 pfn is not initialized (page->flags is 0xFFFFFFFF)
3. The nid and zonenum obtained using page_zone(pfn_to_page(0)) are out of bounds in the corresponding array, &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)], access to the out-of-bounds zone member variables appear abnormal, resulting in Oops.
Therefore, it is necessary to keep the page between 0 and the minimum pfn to prevent Oops from appearing.

---
 arch/mips/loongson64/loongson-3/numa.c | 3 +++
 1 file changed, 3 insertions(+)
arch/mips/loongson64/loongson-3/numa.c +3 -0
index 8f20d2cb3767..7e7376cc94b1 100644
@@ -200,6 +200,9 @@ static void __init node_mem_init(unsigned int node)
 		if (node_end_pfn(0) >= (0xffffffff >> PAGE_SHIFT))
 			memblock_reserve((node_addrspace_offset | 0xfe000000),
 					 32 << 20);
+
+		/* Reserve pfn range 0~node[0]->node_start_pfn */
+		memblock_reserve(0, PAGE_SIZE * start_pfn);
 	}
 }
 
Signature · 1 line
2.30.2
author maintainer
#120 lore raw

PATCH 115/122 media: zr364xx: fix memory leak in zr364xx_start_readpipe

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

commit 0a045eac8d0427b64577a24d74bb8347c905ac65 upstream.

syzbot reported memory leak in zr364xx driver.
The problem was in non-freed urb in case of
usb_submit_urb() fail.

backtrace:

  [<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline]
  [<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74
  [<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022
  [<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline]
  [<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516
  [<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
  [<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576
Fixes ccbf035ae5de ("V4L/DVB (12278): zr364xx: implement V4L2_CAP_STREAMING")
Reported-by [email protected]
---
 drivers/media/usb/zr364xx/zr364xx.c |    1 +
 1 file changed, 1 insertion(+)
drivers/media/usb/zr364xx/zr364xx.c +1 -0
@@ -1037,6 +1037,7 @@ static int zr364xx_start_readpipe(struct
 	DBG("submitting URB %p\n", pipe_info->stream_urb);
 	retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
 	if (retval) {
+		usb_free_urb(pipe_info->stream_urb);
 		printk(KERN_ERR KBUILD_MODNAME ": start read pipe failed\n");
 		return retval;
 	}
author maintainer
#118 lore raw

PATCH 113/122 media: subdev: disallow ioctl for saa6588/davinci

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

commit 0a7790be182d32b9b332a37cb4206e24fe94b728 upstream.

The saa6588_ioctl() function expects to get called from other kernel functions with a 'saa6588_command' pointer, but I found nothing stops it from getting called from user space instead, which seems rather dangerous.

The same thing happens in the davinci vpbe driver with its VENC_GET_FLD command.

As a quick fix, add a separate .command() callback pointer for this driver and change the two callers over to that. This change can easily get backported to stable kernels if necessary, but since there are only two drivers, we may want to eventually replace this with a set of more specialized callbacks in the long run.

Fixes c3fda7f835b0 ("V4L/DVB (10537): saa6588: convert to v4l2_subdev.")
---
 drivers/media/i2c/saa6588.c                   |    4 ++--
 drivers/media/pci/bt8xx/bttv-driver.c         |    6 +++---
 drivers/media/pci/saa7134/saa7134-video.c     |    6 +++---
 drivers/media/platform/davinci/vpbe_display.c |    2 +-
 drivers/media/platform/davinci/vpbe_venc.c    |    6 ++----
 include/media/v4l2-subdev.h                   |    4 ++++
 6 files changed, 15 insertions(+), 13 deletions(-)
drivers/media/i2c/saa6588.c +2 -2
@@ -380,7 +380,7 @@ static void saa6588_configure(struct saa
 
 /* ---------------------------------------------------------------------- */
 
-static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+static long saa6588_command(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 {
 	struct saa6588 *s = to_saa6588(sd);
 	struct saa6588_command *a = arg;
@@ -433,7 +433,7 @@ static int saa6588_s_tuner(struct v4l2_s
 /* ----------------------------------------------------------------------- */
 
 static const struct v4l2_subdev_core_ops saa6588_core_ops = {
-	.ioctl = saa6588_ioctl,
+	.command = saa6588_command,
 };
 
 static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = {
drivers/media/pci/bt8xx/bttv-driver.c +3 -3
@@ -3187,7 +3187,7 @@ static int radio_release(struct file *fi
 
 	btv->radio_user--;
 
-	bttv_call_all(btv, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
+	bttv_call_all(btv, core, command, SAA6588_CMD_CLOSE, &cmd);
 
 	if (btv->radio_user == 0)
 		btv->has_radio_tuner = 0;
@@ -3268,7 +3268,7 @@ static ssize_t radio_read(struct file *f
 	cmd.result = -ENODEV;
 	radio_enable(btv);
 
-	bttv_call_all(btv, core, ioctl, SAA6588_CMD_READ, &cmd);
+	bttv_call_all(btv, core, command, SAA6588_CMD_READ, &cmd);
 
 	return cmd.result;
 }
@@ -3289,7 +3289,7 @@ static __poll_t radio_poll(struct file *
 	cmd.instance = file;
 	cmd.event_list = wait;
 	cmd.poll_mask = res;
-	bttv_call_all(btv, core, ioctl, SAA6588_CMD_POLL, &cmd);
+	bttv_call_all(btv, core, command, SAA6588_CMD_POLL, &cmd);
 
 	return cmd.poll_mask;
 }
drivers/media/pci/saa7134/saa7134-video.c +3 -3
@@ -1179,7 +1179,7 @@ static int video_release(struct file *fi
 
 	saa_call_all(dev, tuner, standby);
 	if (vdev->vfl_type == VFL_TYPE_RADIO)
-		saa_call_all(dev, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
+		saa_call_all(dev, core, command, SAA6588_CMD_CLOSE, &cmd);
 	mutex_unlock(&dev->lock);
 
 	return 0;
@@ -1198,7 +1198,7 @@ static ssize_t radio_read(struct file *f
 	cmd.result = -ENODEV;
 
 	mutex_lock(&dev->lock);
-	saa_call_all(dev, core, ioctl, SAA6588_CMD_READ, &cmd);
+	saa_call_all(dev, core, command, SAA6588_CMD_READ, &cmd);
 	mutex_unlock(&dev->lock);
 
 	return cmd.result;
@@ -1214,7 +1214,7 @@ static __poll_t radio_poll(struct file *
 	cmd.event_list = wait;
 	cmd.poll_mask = 0;
 	mutex_lock(&dev->lock);
-	saa_call_all(dev, core, ioctl, SAA6588_CMD_POLL, &cmd);
+	saa_call_all(dev, core, command, SAA6588_CMD_POLL, &cmd);
 	mutex_unlock(&dev->lock);
 
 	return rc | cmd.poll_mask;
drivers/media/platform/davinci/vpbe_display.c +1 -1
@@ -48,7 +48,7 @@ static int venc_is_second_field(struct v
 
 	ret = v4l2_subdev_call(vpbe_dev->venc,
 			       core,
-			       ioctl,
+			       command,
 			       VENC_GET_FLD,
 			       &val);
 	if (ret < 0) {
drivers/media/platform/davinci/vpbe_venc.c +2 -4
@@ -521,9 +521,7 @@ static int venc_s_routing(struct v4l2_su
 	return ret;
 }
 
-static long venc_ioctl(struct v4l2_subdev *sd,
-			unsigned int cmd,
-			void *arg)
+static long venc_command(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 {
 	u32 val;
 
@@ -542,7 +540,7 @@ static long venc_ioctl(struct v4l2_subde
 }
 
 static const struct v4l2_subdev_core_ops venc_core_ops = {
-	.ioctl      = venc_ioctl,
+	.command      = venc_command,
 };
 
 static const struct v4l2_subdev_video_ops venc_video_ops = {
include/media/v4l2-subdev.h +4 -0
@@ -162,6 +162,9 @@ struct v4l2_subdev_io_pin_config {
  * @s_gpio: set GPIO pins. Very simple right now, might need to be extended with
  *	a direction argument if needed.
  *
+ * @command: called by in-kernel drivers in order to call functions internal
+ *	   to subdev drivers driver that have a separate callback.
+ *
  * @ioctl: called at the end of ioctl() syscall handler at the V4L2 core.
  *	   used to provide support for private ioctls used on the driver.
  *
@@ -193,6 +196,7 @@ struct v4l2_subdev_core_ops {
 	int (*load_fw)(struct v4l2_subdev *sd);
 	int (*reset)(struct v4l2_subdev *sd, u32 val);
 	int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
+	long (*command)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
 	long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
 #ifdef CONFIG_COMPAT
 	long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd,
author maintainer
#119 lore raw

PATCH 114/122 media: dtv5100: fix control-request directions

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 8c8b9a9be2afa8bd6a72ad1130532baab9fab89d upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Fix the control requests which erroneously used usb_rcvctrlpipe().

Fixes 8466028be792 ("V4L/DVB (8734): Initial support for AME DTV-5100 USB2.0 DVB-T")
Cc [email protected] # 2.6.28
---
 drivers/media/usb/dvb-usb/dtv5100.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/media/usb/dvb-usb/dtv5100.c +5 -2
@@ -26,6 +26,7 @@ static int dtv5100_i2c_msg(struct dvb_us
 			   u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
 {
 	struct dtv5100_state *st = d->priv;
+	unsigned int pipe;
 	u8 request;
 	u8 type;
 	u16 value;
@@ -34,6 +35,7 @@ static int dtv5100_i2c_msg(struct dvb_us
 	switch (wlen) {
 	case 1:
 		/* write { reg }, read { value } */
+		pipe = usb_rcvctrlpipe(d->udev, 0);
 		request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ :
 							DTV5100_TUNER_READ);
 		type = USB_TYPE_VENDOR | USB_DIR_IN;
@@ -41,6 +43,7 @@ static int dtv5100_i2c_msg(struct dvb_us
 		break;
 	case 2:
 		/* write { reg, value } */
+		pipe = usb_sndctrlpipe(d->udev, 0);
 		request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE :
 							DTV5100_TUNER_WRITE);
 		type = USB_TYPE_VENDOR | USB_DIR_OUT;
@@ -54,7 +57,7 @@ static int dtv5100_i2c_msg(struct dvb_us
 
 	memcpy(st->data, rbuf, rlen);
 	msleep(1); /* avoid I2C errors */
-	return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request,
+	return usb_control_msg(d->udev, pipe, request,
 			       type, value, index, st->data, rlen,
 			       DTV5100_USB_TIMEOUT);
 }
@@ -141,7 +144,7 @@ static int dtv5100_probe(struct usb_inte
 
 	/* initialize non qt1010/zl10353 part? */
 	for (i = 0; dtv5100_init[i].request; i++) {
-		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				      dtv5100_init[i].request,
 				      USB_TYPE_VENDOR | USB_DIR_OUT,
 				      dtv5100_init[i].value,
author maintainer
#122 lore raw

PATCH 117/122 media: gspca/sunplus: fix zero-length control requests

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit b4bb4d425b7b02424afea2dfdcd77b3b4794175e upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning.

Fix the single zero-length control request which was using the read-register helper, and update the helper so that zero-length reads fail with an error message instead.

Fixes 6a7eba24e4f0 ("V4L/DVB (8157): gspca: all subdrivers")
Cc [email protected] # 2.6.27
---
 drivers/media/usb/gspca/sunplus.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/media/usb/gspca/sunplus.c +6 -2
@@ -242,6 +242,10 @@ static void reg_r(struct gspca_dev *gspc
 		gspca_err(gspca_dev, "reg_r: buffer overflow\n");
 		return;
 	}
+	if (len == 0) {
+		gspca_err(gspca_dev, "reg_r: zero-length read\n");
+		return;
+	}
 	if (gspca_dev->usb_err < 0)
 		return;
 	ret = usb_control_msg(gspca_dev->dev,
@@ -250,7 +254,7 @@ static void reg_r(struct gspca_dev *gspc
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0,		/* value */
 			index,
-			len ? gspca_dev->usb_buf : NULL, len,
+			gspca_dev->usb_buf, len,
 			500);
 	if (ret < 0) {
 		pr_err("reg_r err %d\n", ret);
@@ -727,7 +731,7 @@ static int sd_start(struct gspca_dev *gs
 		case MegaImageVI:
 			reg_w_riv(gspca_dev, 0xf0, 0, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
-			reg_r(gspca_dev, 0xf0, 4, 0);
+			reg_w_riv(gspca_dev, 0xf0, 4, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
 			break;
 		default:
author maintainer
#117 lore raw

PATCH 112/122 PCI: aardvark: Implement workaround for the readback value of VEND_ID

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

commit 7f71a409fe3d9358da07c77f15bb5b7960f12253 upstream.

Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243):

The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it should read 11ABh.

The firmware can write the correct value, 11ABh, through VEND_ID (RD0076044h [15:0]).

Implement this workaround in aardvark driver for both PCI vendor id and PCI subsystem vendor id.

This change affects and fixes PCI vendor id of emulated PCIe root bridge. After this change emulated PCIe root bridge has correct vendor id.

Fixes 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
---
 drivers/pci/controller/pci-aardvark.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/pci/controller/pci-aardvark.c +11 -0
@@ -127,6 +127,7 @@
 #define     LTSSM_MASK				0x3f
 #define     LTSSM_L0				0x10
 #define     RC_BAR_CONFIG			0x300
+#define VENDOR_ID_REG				(LMI_BASE_ADDR + 0x44)
 
 /* PCIe core controller registers */
 #define CTRL_CORE_BASE_ADDR			0x18000
@@ -268,6 +269,16 @@ static void advk_pcie_setup_hw(struct ad
 	reg |= (IS_RC_MSK << IS_RC_SHIFT);
 	advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
 
+	/*
+	 * Replace incorrect PCI vendor id value 0x1b4b by correct value 0x11ab.
+	 * VENDOR_ID_REG contains vendor id in low 16 bits and subsystem vendor
+	 * id in high 16 bits. Updating this register changes readback value of
+	 * read-only vendor id bits in PCIE_CORE_DEV_ID_REG register. Workaround
+	 * for erratum 4.1: "The value of device and vendor ID is incorrect".
+	 */
+	reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
+	advk_writel(pcie, reg, VENDOR_ID_REG);
+
 	/* Set Advanced Error Capabilities and Control PF0 register */
 	reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
 		PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
author maintainer
#125 lore raw

PATCH 120/122 pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()

In reply to Greg Kroah-Hartman

From: Zou Wei <[email protected]>

commit 884af72c90016cfccd5717439c86b48702cbf184 upstream.

Add the missing unlock before return from function mcp23s08_irq() in the error handling case.

v1-->v2:
remove the "return IRQ_HANDLED" line

Fixes 897120d41e7a ("pinctrl: mcp23s08: fix race condition in irq handler")
---
 drivers/pinctrl/pinctrl-mcp23s08.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/pinctrl-mcp23s08.c +1 -1
@@ -461,7 +461,7 @@ static irqreturn_t mcp23s08_irq(int irq,
 
 	if (intf == 0) {
 		/* There is no interrupt pending */
-		return IRQ_HANDLED;
+		goto unlock;
 	}
 
 	if (mcp_read(mcp, MCP_INTCAP, &intcap))
author maintainer
#127 lore raw

PATCH 122/122 smackfs: restrict bytes count in smk_set_cipso()

In reply to Greg Kroah-Hartman

From: Tetsuo Handa <[email protected]>

commit 49ec114a6e62d8d320037ce71c1aaf9650b3cafd upstream.

Oops, I failed to update subject line.

Quoted 1 line

From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001

From: Tetsuo Handa <[email protected]>
Date: Mon, 12 Apr 2021 22:25:06 +0900
Subject: [PATCH 5.4 122/122] smackfs: restrict bytes count in smk_set_cipso()

Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case.

---
 security/smack/smackfs.c |    2 ++
 1 file changed, 2 insertions(+)
security/smack/smackfs.c +2 -0
@@ -855,6 +855,8 @@ static ssize_t smk_set_cipso(struct file
 	if (format == SMK_FIXED24_FMT &&
 	    (count < SMK_CIPSOMIN || count > SMK_CIPSOMAX))
 		return -EINVAL;
+	if (count > PAGE_SIZE)
+		return -EINVAL;
 
 	data = memdup_user_nul(buf, count);
 	if (IS_ERR(data))
author maintainer
#121 lore raw

PATCH 116/122 media: gspca/sq905: fix control-request direction

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 53ae298fde7adcc4b1432bce2dbdf8dac54dfa72 upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Fix the USB_REQ_SYNCH_FRAME request which erroneously used usb_sndctrlpipe().

Fixes 27d35fc3fb06 ("V4L/DVB (10639): gspca - sq905: New subdriver.")
Cc [email protected] # 2.6.30
---
 drivers/media/usb/gspca/sq905.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/usb/gspca/sq905.c +1 -1
@@ -116,7 +116,7 @@ static int sq905_command(struct gspca_de
 	}
 
 	ret = usb_control_msg(gspca_dev->dev,
-			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      usb_rcvctrlpipe(gspca_dev->dev, 0),
 			      USB_REQ_SYNCH_FRAME,                /* request */
 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      SQ905_PING, 0, gspca_dev->usb_buf, 1,
author maintainer
#126 lore raw

PATCH 121/122 jfs: fix GPF in diFree

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

commit 9d574f985fe33efd6911f4d752de6f485a1ea732 upstream.

Avoid passing inode with
JFS_SBI(inode->i_sb)->ipimap == NULL to
diFree()[1]. GFP will appear:

	struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap;
	struct inomap *imap = JFS_IP(ipimap)->i_imap;

JFS_IP() will return invalid pointer when ipimap == NULL

Call Trace:
 diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1]
 jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154
 evict+0x2ed/0x750 fs/inode.c:578
 iput_final fs/inode.c:1654 [inline]
 iput.part.0+0x3fe/0x820 fs/inode.c:1680
 iput+0x58/0x70 fs/inode.c:1670
---
 fs/jfs/inode.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/jfs/inode.c +2 -1
@@ -151,7 +151,8 @@ void jfs_evict_inode(struct inode *inode
 			if (test_cflag(COMMIT_Freewmap, inode))
 				jfs_free_zero_link(inode);
 
-			diFree(inode);
+			if (JFS_SBI(inode->i_sb)->ipimap)
+				diFree(inode);
 
 			/*
 			 * Free the inode from the quota allocation.
author maintainer
#124 lore raw

PATCH 119/122 media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K

In reply to Greg Kroah-Hartman

From: Benjamin Drung <[email protected]>

commit 4c6e0976295add7f0ed94d276c04a3d6f1ea8f83 upstream.

The Elgato Cam Link 4K HDMI video capture card reports to support three different pixel formats, where the first format depends on the connected HDMI device.

```
$ v4l2-ctl -d /dev/video0 --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
	Type: Video Capture

	[0]: 'NV12' (Y/CbCr 4:2:0)
		Size: Discrete 3840x2160
			Interval: Discrete 0.033s (29.970 fps)
	[1]: 'NV12' (Y/CbCr 4:2:0)
		Size: Discrete 3840x2160
			Interval: Discrete 0.033s (29.970 fps)
	[2]: 'YU12' (Planar YUV 4:2:0)
		Size: Discrete 3840x2160
			Interval: Discrete 0.033s (29.970 fps)
```

Changing the pixel format to anything besides the first pixel format does not work:

```
$ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12
Format Video Capture:
	Width/Height      : 3840/2160
	Pixel Format      : 'NV12' (Y/CbCr 4:2:0)
	Field             : None
	Bytes per Line    : 3840
	Size Image        : 12441600
	Colorspace        : sRGB
	Transfer Function : Rec. 709
	YCbCr/HSV Encoding: Rec. 709
	Quantization      : Default (maps to Limited Range)
	Flags             :
```

User space applications like VLC might show an error message on the terminal in that case:

```
libv4l2: error set_fmt gave us a different result than try_fmt!
```

Depending on the error handling of the user space applications, they might display a distorted video, because they use the wrong pixel format for decoding the stream.

The Elgato Cam Link 4K responds to the USB video probe VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The second byte contains bFormatIndex (instead of being the second byte of bmHint). The first byte is always zero. The third byte is always 1.

The firmware bug was reported to Elgato on 2020-12-01 and it was forwarded by the support team to the developers as feature request. There is no firmware update available since then. The latest firmware for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67.

Therefore correct the malformed data structure for this device. The change was successfully tested with VLC, OBS, and Chromium using different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160, 1920x1080), and frame rates (29.970 and 59.940 fps).

---
 drivers/media/usb/uvc/uvc_video.c |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
drivers/media/usb/uvc/uvc_video.c +27 -0
@@ -124,10 +124,37 @@ int uvc_query_ctrl(struct uvc_device *de
 static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
 	struct uvc_streaming_control *ctrl)
 {
+	static const struct usb_device_id elgato_cam_link_4k = {
+		USB_DEVICE(0x0fd9, 0x0066)
+	};
 	struct uvc_format *format = NULL;
 	struct uvc_frame *frame = NULL;
 	unsigned int i;
 
+	/*
+	 * The response of the Elgato Cam Link 4K is incorrect: The second byte
+	 * contains bFormatIndex (instead of being the second byte of bmHint).
+	 * The first byte is always zero. The third byte is always 1.
+	 *
+	 * The UVC 1.5 class specification defines the first five bits in the
+	 * bmHint bitfield. The remaining bits are reserved and should be zero.
+	 * Therefore a valid bmHint will be less than 32.
+	 *
+	 * Latest Elgato Cam Link 4K firmware as of 2021-03-23 needs this fix.
+	 * MCU: 20.02.19, FPGA: 67
+	 */
+	if (usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k) &&
+	    ctrl->bmHint > 255) {
+		u8 corrected_format_index = ctrl->bmHint >> 8;
+
+		/* uvc_dbg(stream->dev, VIDEO,
+			"Correct USB video probe response from {bmHint: 0x%04x, bFormatIndex: %u} to {bmHint: 0x%04x, bFormatIndex: %u}\n",
+			ctrl->bmHint, ctrl->bFormatIndex,
+			1, corrected_format_index); */
+		ctrl->bmHint = 1;
+		ctrl->bFormatIndex = corrected_format_index;
+	}
+
 	for (i = 0; i < stream->nformats; ++i) {
 		if (stream->format[i].index == ctrl->bFormatIndex) {
 			format = &stream->format[i];
author maintainer
#123 lore raw

PATCH 118/122 media: rtl28xxu: fix zero-length control request

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 25d5ce3a606a1eb23a9265d615a92a876ff9cb5f upstream.

The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation.

Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning.

Fix the zero-length i2c-read request used for type detection by attempting to read a single byte instead.

Reported-by [email protected]
Fixes d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc Antti Palosaari <[email protected]>
---
 drivers/media/usb/dvb-usb-v2/rtl28xxu.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/usb/dvb-usb-v2/rtl28xxu.c +2 -1
@@ -609,8 +609,9 @@ static int rtl28xxu_read_config(struct d
 static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name)
 {
 	struct rtl28xxu_dev *dev = d_to_priv(d);
+	u8 buf[1];
 	int ret;
-	struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL};
+	struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 1, buf};
 
 	dev_dbg(&d->intf->dev, "\n");
 
#101 lore raw

Re: [PATCH 5.4 097/122] xfrm: policy: Read seqcount outside of rcu-read side in xfrm_policy_lookup_bytype

In reply to Greg Kroah-Hartman
Quoted 3 lines · Greg Kroah-Hartman

From: Varad Gautam <[email protected]>

commit d7b0408934c749f546b01f2b33d07421a49b6f3e upstream.

This patch has been reverted in the ipsec tree, the problem was then addressed via 2580d3f40022642452dd8422bfb8c22e54cf84bb ("xfrm: Fix RCU vs hash_resize_mutex lock inversion").

AFAICS its not in mainline yet.

#32 lore raw

Re: [PATCH 5.4 031/122] net: moxa: Use devm_platform_get_and_ioremap_resource()

In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 4 lines · Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]

arm moxart_defconfig build fails with the error:
drivers/net/ethernet/moxa/moxart_ether.c:483:22: error: implicit declaration of function 'devm_platform_get_and_ioremap_resource'; did you mean 'devm_platform_ioremap_resource'? [-Werror=implicit-function-declaration]

Reverting this patch fixes the build.

Signature · 2 lines
Regards
Sudip
Tested-by on the v1 series
#128 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.133 release. There are 122 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 17 Jul 2021 18:21:07 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.133-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Signature · 1 line
Florian
#33 lore raw

Re: [PATCH 5.4 031/122] net: moxa: Use devm_platform_get_and_ioremap_resource()

In reply to Sudip Mukherjee

Hi,

Quoted 4 lines · Sudip Mukherjee

Hi Greg,

On Thu, Jul 15, 2021 at 7:44 PM Greg Kroah-Hartman <[email protected]> wrote:

Quoted 8 lines
Quoted 3 lines

From: Yang Yingliang <[email protected]>

[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]

arm moxart_defconfig build fails with the error:
drivers/net/ethernet/moxa/moxart_ether.c:483:22: error: implicit declaration of function 'devm_platform_get_and_ioremap_resource'; did you mean 'devm_platform_ioremap_resource'? [-Werror=implicit-function-declaration]

devm_platform_get_and_ioremap_resource() is introduced in v5.7-rc1, I can send a patch for stable-5.4.

Thanks,
Yang

Quoted 4 lines

Reverting this patch fixes the build.

maintainer Tested-by on the v1 series
#129 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.133 release. There are 122 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 17 Jul 2021 18:21:07 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.133-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    59 tests:	59 pass, 0 fail

Linux version: 5.4.133-rc1-g65e3ccda8c26
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon

Tested-by Linux Kernel Functional Testing on the v1 series
#130 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.133 release. There are 122 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 17 Jul 2021 18:21:07 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.133-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.4.133-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: 7f5fd6e106edc9ee7ca2a508fd7fa81e074102e5
* git describe: v5.4.132-123-g7f5fd6e106ed
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.132-123-g7f5fd6e106ed

## No regressions (compared to v5.4.132)

## No fixes (compared to v5.4.132)

## Test result summary
total: 73331, pass: 59092, fail: 1149, skip: 11288, xfail: 1802,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 192 total, 192 passed, 0 failed
* arm64: 26 total, 26 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 26 total, 26 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

author maintainer
#102 lore raw

Re: [PATCH 5.4 097/122] xfrm: policy: Read seqcount outside of rcu-read side in xfrm_policy_lookup_bytype

In reply to Florian Westphal
Quoted 10 lines · Florian Westphal
Quoted 3 lines · Greg Kroah-Hartman

From: Varad Gautam <[email protected]>

commit d7b0408934c749f546b01f2b33d07421a49b6f3e upstream.

This patch has been reverted in the ipsec tree, the problem was then addressed via 2580d3f40022642452dd8422bfb8c22e54cf84bb ("xfrm: Fix RCU vs hash_resize_mutex lock inversion").

AFAICS its not in mainline yet.

Thank you, I have now dropped this from everywhere.

greg k-h

author maintainer
#34 lore raw

Re: [PATCH 5.4 031/122] net: moxa: Use devm_platform_get_and_ioremap_resource()

In reply to Yang Yingliang
Quoted 10 lines · Yang Yingliang

Hi,

Quoted 7 lines · Sudip Mukherjee

Hi Greg,

Quoted 3 lines · Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]

Quoted 8 lines
Quoted 5 lines

arm moxart_defconfig build fails with the error:
drivers/net/ethernet/moxa/moxart_ether.c:483:22: error: implicit declaration of function 'devm_platform_get_and_ioremap_resource'; did you mean 'devm_platform_ioremap_resource'? [-Werror=implicit-function-declaration]

devm_platform_get_and_ioremap_resource() is introduced in v5.7-rc1, I can send a patch for stable-5.4.

If you want to, not a big deal. I've dropped this patch now, thanks.

greg k-h

Tested-by Hulk Robot on the v1 series
#131 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.133 release. There are 122 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 17 Jul 2021 18:21:07 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.133-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

Tested on arm64 and x86 for 5.4.133-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.133-rc1
Commit: 7f5fd6e106edc9ee7ca2a508fd7fa81e074102e5
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8905
passed: 8905
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8905
passed: 8905
failed: 0
timeout: 0
--------------------------------------------------------------------