5.16.20-rc1 review
Subsystems (5)
Greg Kroah-Hartman
maintainercover 5.16.20-rc1 review
----------------------
Note, this will be the LAST 5.16.y kernel to be released. Please move to the 5.17.y tree at this time.
----------------------
This is the start of the stable review cycle for the 5.16.20 release. There are 285 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 14 Apr 2022 06:28:59 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.20-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.16.20-rc1
Christophe Leroy <[email protected]>
static_call: Don't make __static_call_return0 static
Waiman Long <[email protected]>
mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
Andre Przywara <[email protected]>
irqchip/gic, gic-v3: Prevent GSI to SGI translations
Christophe Leroy <[email protected]>
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
Marc Zyngier <[email protected]>
irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling
Peter Zijlstra <[email protected]>
x86,static_call: Fix __static_call_return0 for i386
Sebastian Andrzej Siewior <[email protected]>
sched: Teach the forced-newidle balancer about CPU affinity limitation.
Vincent Mailhol <[email protected]>
x86/bug: Prevent shadowing in __WARN_FLAGS
Kefeng Wang <[email protected]>
Revert "powerpc: Set max_mapnr correctly"
Kefeng Wang <[email protected]>
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
Andrea Parri (Microsoft) <[email protected]>
Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()
Yang Zhong <[email protected]>
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Kees Cook <[email protected]>
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
Paolo Bonzini <[email protected]>
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
Vinod Koul <[email protected]>
dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
Arnaldo Carvalho de Melo <[email protected]>
tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
Arnaldo Carvalho de Melo <[email protected]>
tools build: Filter out options and warnings not supported by clang
Arnaldo Carvalho de Melo <[email protected]>
perf python: Fix probing for some clang command line options
Arnaldo Carvalho de Melo <[email protected]>
perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13
Dan Carpenter <[email protected]>
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
Jakub Sitnicki <[email protected]>
selftests/bpf: Fix u8 narrow load checks for bpf_sk_lookup remote_port
Jakub Sitnicki <[email protected]>
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
Jakub Kicinski <[email protected]>
Revert "selftests: net: Add tls config dependency for tls selftests"
Dust Li <[email protected]>
net/smc: send directly on setting TCP_NODELAY
Philip Yang <[email protected]>
drm/amdkfd: Fix variable set but not used warning
Suravee Suthikulpanit <[email protected]>
KVM: SVM: Allow AVIC support on system w/ physical APIC ID > 255
Trond Myklebust <[email protected]>
SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
Alex Deucher <[email protected]>
drm/amdgpu: don't use BACO for reset in S3
Lee Jones <[email protected]>
drm/amdkfd: Create file descriptor after client is added to smi_clients list
Karol Herbst <[email protected]>
drm/nouveau/pmu: Add missing callbacks for Tegra devices
Emily Deng <[email protected]>
drm/amdgpu/vcn: Fix the register setting for vcn1
Alex Deucher <[email protected]>
drm/amdgpu/smu10: fix SoC/fclk units in auto mode
Benjamin Marty <[email protected]>
drm/amdgpu/display: change pipe policy for DCN 2.1
CHANDAN VURDIGERE NATARAJ <[email protected]>
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
Daniel Mack <[email protected]>
drm/panel: ili9341: fix optional regulator handling
Shirish S <[email protected]>
amd/display: set backlight only if required
Thomas Zimmermann <[email protected]>
fbdev: Fix unregistering of framebuffers without device
Marc Zyngier <[email protected]>
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
Namhyung Kim <[email protected]>
perf/core: Inherit event_caps
Xiaomeng Tong <[email protected]>
perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
Christian Lamparter <[email protected]>
ata: sata_dwc_460ex: Fix crash due to OOB write
Kan Liang <[email protected]>
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
Dave Hansen <[email protected]>
x86/mm/tlb: Revert retpoline avoidance approach
Reto Buerki <[email protected]>
x86/msi: Fix msi message data shadow struct
Shreeya Patel <[email protected]>
gpio: Restrict usage of GPIO chip irq members before initialization
Xiaomeng Tong <[email protected]>
drbd: fix an invalid memory access caused by incorrect use of list iterator
Douglas Miller <[email protected]>
RDMA/hfi1: Fix use-after-free bug for mm struct
Guo Ren <[email protected]>
arm64: patch_text: Fixup last cpu should be master
Manish Chopra <[email protected]>
qed: fix ethtool register dump
Vinod Koul <[email protected]>
spi: core: add dma_map_dev for __spi_unmap_msg()
Kaiwen Hu <[email protected]>
btrfs: prevent subvol with swapfile from being deleted
Qu Wenruo <[email protected]>
btrfs: avoid defragging extents whose next extents are not targets
Qu Wenruo <[email protected]>
btrfs: remove device item and update super block in the same transaction
Johannes Thumshirn <[email protected]>
btrfs: zoned: traverse devices under chunk_mutex in btrfs_can_activate_zone
Ethan Lien <[email protected]>
btrfs: fix qgroup reserve overflow the qgroup limit
Kan Liang <[email protected]>
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
Pawan Gupta <[email protected]>
x86/speculation: Restore speculation related MSRs during S3 resume
Pawan Gupta <[email protected]>
x86/pm: Save the MSR validity status at context setup
Jens Axboe <[email protected]>
io_uring: fix race between timeout flush and removal
Eugene Syromiatnikov <[email protected]>
io_uring: implement compat handling for IORING_REGISTER_IOWQ_AFF
Jens Axboe <[email protected]>
io_uring: defer splice/tee file validity check until command issue
Jens Axboe <[email protected]>
io_uring: don't check req->file in io_fsync_prep()
Miaohe Lin <[email protected]>
mm/mempolicy: fix mpol_new leak in shared_policy_replace
Paolo Bonzini <[email protected]>
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
Max Filippov <[email protected]>
highmem: fix checks in __kmap_local_sched_{in,out}Guo Xuenan <[email protected]>
lz4: fix LZ4_decompress_safe_partial read out of bound
Michael Wu <[email protected]>
mmc: core: Fixup support for writeback-cache for eMMC and SD
Wolfram Sang <[email protected]>
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
Yann Gautier <[email protected]>
mmc: mmci: stm32: correctly check all elements of sg list
Christian Löhle <[email protected]>
mmc: block: Check for errors after write on SPI
Pali Rohár <[email protected]>
Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
Adrian Hunter <[email protected]>
scsi: ufs: ufs-pci: Add support for Intel MTL
Damien Le Moal <[email protected]>
scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove()
Chanho Park <[email protected]>
arm64: Add part number for Arm Cortex-A78AE
Denis Nikitin <[email protected]>
perf session: Remap buf if there is no space for event
Adrian Hunter <[email protected]>
perf tools: Fix perf's libperf_print callback
James Clark <[email protected]>
perf: arm-spe: Fix perf report --mem-mode
Tony Lindgren <[email protected]>
iommu/omap: Fix regression in probe for NULL pointer dereference
Trond Myklebust <[email protected]>
SUNRPC: svc_tcp_sendmsg() should handle errors from xdr_alloc_bvec()
Trond Myklebust <[email protected]>
SUNRPC: Handle low memory situations in call_status()
Trond Myklebust <[email protected]>
SUNRPC: Handle ENOMEM in call_transmit_status()
Pavel Begunkov <[email protected]>
io_uring: don't touch scm_fp_list after queueing skb
Pavel Begunkov <[email protected]>
io_uring: nospec index for tags on files update
Xiaomeng Tong <[email protected]>
scsi: ufs: ufshpb: Fix a NULL check on list iterator
Martin K. Petersen <[email protected]>
scsi: sd: sd_read_cpr() requires VPD pages
Lv Yunlong <[email protected]>
drbd: Fix five use after free bugs in get_initial_state
Maxim Mikityanskiy <[email protected]>
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
Kamal Dasu <[email protected]>
spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()
Jamie Bainbridge <[email protected]>
qede: confirm skb is allocated before using
Michael Walle <[email protected]>
net: phy: mscc-miim: reject clause 45 register accesses
Taehee Yoo <[email protected]>
net: sfc: fix using uninitialized xdp tx_queue
Eric Dumazet <[email protected]>
rxrpc: fix a race in rxrpc_exit_net()
Ilya Maximets <[email protected]>
net: openvswitch: fix leak of nested actions
Andrew Lunn <[email protected]>
net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
Ilya Maximets <[email protected]>
net: openvswitch: don't send internal clone attribute to the userspace.
Maciej Fijalkowski <[email protected]>
ice: clear cmd_type_offset_bsz for TX rings
Maciej Fijalkowski <[email protected]>
ice: xsk: fix VSI state check in ice_xsk_wakeup()
Maciej Fijalkowski <[email protected]>
ice: synchronize_rcu() when terminating rings
David Ahern <[email protected]>
ipv6: Fix stats accounting in ip6_pkt_drop
Anatolii Gerasymenko <[email protected]>
ice: Do not skip not enabled queues in ice_vc_dis_qs_msg
Anatolii Gerasymenko <[email protected]>
ice: Set txq_teid to ICE_INVAL_TEID on ring creation
Miaoqian Lin <[email protected]>
dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probe
Jamie Bainbridge <[email protected]>
sctp: count singleton chunks in assoc user stats
Niels Dossche <[email protected]>
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
Mark Zhang <[email protected]>
IB/cm: Cancel mad on the DREQ event when the state is MRA_REP_RCVD
Aharon Landau <[email protected]>
RDMA/mlx5: Add a missing update of cache->last_add
Aharon Landau <[email protected]>
RDMA/mlx5: Don't remove cache MRs when a delay is needed
Martin Habets <[email protected]>
sfc: Do not free an empty page_ring
Ray Jui <[email protected]>
bnxt_en: Prevent XDP redirect from running when stopping TX queue
Andy Gospodarek <[email protected]>
bnxt_en: reserve space inside receive page for skb_shared_info
Pavan Chebbi <[email protected]>
bnxt_en: Synchronize tx when xdp redirects happen on same ring
Phil Auld <[email protected]>
arch/arm64: Fix topology initialization for core scheduling
Axel Lin <[email protected]>
regulator: atc260x: Fix missing active_discharge_on setting
Axel Lin <[email protected]>
regulator: rtq2134: Fix missing active_discharge_on setting
Liu Ying <[email protected]>
drm/imx: dw_hdmi-imx: Fix bailout in error cases of probe
José Expósito <[email protected]>
drm/imx: Fix memory leak in imx_pd_connector_get_modes
Jiasheng Jiang <[email protected]>
drm/imx: imx-ldb: Check for null pointer after calling kmemdup
Chen-Yu Tsai <[email protected]>
net: stmmac: Fix unset max_speed difference between DT and non-DT platforms
Nikolay Aleksandrov <[email protected]>
net: ipv4: fix route with nexthop object delete warning
Matt Johnston <[email protected]>
mctp: Use output netdev to allocate skb headroom
Matt Johnston <[email protected]>
mctp: Fix check for dev_hard_header() result
Ivan Vecera <[email protected]>
ice: Clear default forwarding VSI during VSI release
Jean-Philippe Brucker <[email protected]>
skbuff: fix coalescing for page_pool fragment recycling
Eyal Birger <[email protected]>
vrf: fix packet sniffing for traffic originating from ip tunnels
Ziyang Xuan <[email protected]>
net/tls: fix slab-out-of-bounds bug in decrypt_internal
Taehee Yoo <[email protected]>
net: sfc: add missing xdp queue reinitialization
Jason Wang <[email protected]>
vdpa: mlx5: prevent cvq work from hogging CPU
Christophe JAILLET <[email protected]>
scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
John Garry <[email protected]>
scsi: core: Fix sbitmap depth in scsi_realloc_sdev_budget_map()
Kevin Groeneveld <[email protected]>
scsi: sr: Fix typo in CDROM(CLOSETRAY|EJECT) handling
ChenXiaoSong <[email protected]>
NFSv4: fix open failure with O_ACCMODE flag
ChenXiaoSong <[email protected]>
Revert "NFSv4: Handle the special Linux file open access mode"
Guilherme G. Piccoli <[email protected]>
Drivers: hv: vmbus: Fix potential crash on module unload
Dan Carpenter <[email protected]>
drm/amdgpu: fix off by one in amdgpu_gfx_kiq_acquire()
Mateusz Jończyk <[email protected]>
rtc: mc146818-lib: fix RTC presence check
Mateusz Jończyk <[email protected]>
rtc: Check return value from mc146818_get_time()
Mateusz Jończyk <[email protected]>
rtc: mc146818-lib: change return values of mc146818_get_time()
Mauricio Faria de Oliveira <[email protected]>
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
John David Anglin <[email protected]>
parisc: Fix patch code locking and flushing
Helge Deller <[email protected]>
parisc: Fix CPU affinity for Lasi, WAX and Dino chips
Naresh Kamboju <[email protected]>
selftests: net: Add tls config dependency for tls selftests
Trond Myklebust <[email protected]>
NFS: Avoid writeback threads getting stuck in mempool_alloc()
Trond Myklebust <[email protected]>
NFS: nfsiod should not block forever in mempool_alloc()
Trond Myklebust <[email protected]>
SUNRPC: Fix socket waits for write buffer space
Haimin Zhang <[email protected]>
jfs: prevent NULL deref in diFree
Randy Dunlap <[email protected]>
virtio_console: eliminate anonymous module_init & module_exit
Jiri Slaby <[email protected]>
serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
Nathan Chancellor <[email protected]>
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
Peter Zijlstra <[email protected]>
x86: Annotate call_on_stack()
NeilBrown <[email protected]>
NFS: swap-out must always use STABLE writes.
NeilBrown <[email protected]>
NFS: swap IO handling is slightly different for O_DIRECT IO
NeilBrown <[email protected]>
SUNRPC: remove scheduling boost for "SWAPPER" tasks.
NeilBrown <[email protected]>
SUNRPC/xprt: async tasks mustn't block waiting for memory
Maxime Ripard <[email protected]>
clk: Enforce that disjoints limits are invalid
Tony Lindgren <[email protected]>
clk: ti: Preserve node in ti_dt_clocks_register()
Dongli Zhang <[email protected]>
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
Oded Gabbay <[email protected]>
habanalabs: reject host map with mmu disabled
Ohad Sharabi <[email protected]>
habanalabs: fix possible memory leak in MMU DR fini
Trond Myklebust <[email protected]>
NFSv4: Protect the state recovery thread against direct reclaim
Xin Xiong <[email protected]>
NFSv4.2: fix reference count leaks in _nfs42_proc_copy_notify()
Lucas Denefle <[email protected]>
w1: w1_therm: fixes w1_seq for ds28ea00 sensors
Xiaoke Wang <[email protected]>
staging: wfx: fix an error handling in wfx_init_common()
Viresh Kumar <[email protected]>
opp: Expose of-node's name in debugfs
Pierre Gondois <[email protected]>
cpufreq: CPPC: Fix performance/frequency conversion
Sascha Hauer <[email protected]>
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
Amjad Ouled-Ameur <[email protected]>
phy: amlogic: meson8b-usb2: fix shared reset control use
Amjad Ouled-Ameur <[email protected]>
phy: amlogic: meson8b-usb2: Use dev_err_probe()
Amjad Ouled-Ameur <[email protected]>
phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
Stefan Wahren <[email protected]>
staging: vchiq_core: handle NULL result of find_service_by_handle
Stefan Wahren <[email protected]>
staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances
José Expósito <[email protected]>
clk: mediatek: Fix memory leaks on probe
Adam Wujek <[email protected]>
clk: si5341: fix reported clk_rate when output divider is 2
Qinghua Jin <[email protected]>
minix: fix bug when opening a file with O_DIRECT
Randy Dunlap <[email protected]>
init/main.c: return 1 from handled __setup() functions
Feng Tang <[email protected]>
lib/Kconfig.debug: add ARCH dependency for FUNCTION_ALIGN option
Xiubo Li <[email protected]>
ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
Xiubo Li <[email protected]>
ceph: fix inode reference leakage in ceph_get_snapdir()
Wang Yufen <[email protected]>
netlabel: fix out-of-bounds memory accesses
Florian Westphal <[email protected]>
netfilter: conntrack: revisit gc autotuning
Luiz Augusto von Dentz <[email protected]>
Bluetooth: Fix use after free in hci_send_acl
Krzysztof Kozlowski <[email protected]>
MIPS: ingenic: correct unit node address
Max Filippov <[email protected]>
xtensa: fix DTC warning unit_address_format
Deren Wu <[email protected]>
mt76: fix monitor mode crash with sdio driver
H. Nikolaus Schaller <[email protected]>
usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
Michael Walle <[email protected]>
net: sfp: add 2500base-X quirk for Lantech SFP module
Jorge Lopez <[email protected]>
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
Jorge Lopez <[email protected]>
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
Gal Pressman <[email protected]>
net/mlx5e: Remove overzealous validations in netlink EEPROM query
Jakub Kicinski <[email protected]>
net: limit altnames to 64k total
Jakub Kicinski <[email protected]>
net: account alternate interface name memory
Michael T. Kloos <[email protected]>
riscv: Fixed misaligned memory access. Fixed pointer comparison.
Vincent Mailhol <[email protected]>
can: etas_es58x: es58x_fd_rx_event_msg(): initialize rx_event_msg before calling es58x_check_msg_len()
Oliver Hartkopp <[email protected]>
can: isotp: set default value for N_As to 50 micro seconds
Jianglei Nie <[email protected]>
scsi: libfc: Fix use after free in fc_exch_abts_resp()
Hangyu Hua <[email protected]>
powerpc/secvar: fix refcount leak in format_show()
Michael Ellerman <[email protected]>
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
Alexander Lobakin <[email protected]>
MIPS: fix fortify panic when copying asm exception handlers
Li Chen <[email protected]>
PCI: endpoint: Fix misused goto label
Michael Chan <[email protected]>
bnxt_en: Eliminate unintended link toggle during FW reset
Minghao Chi (CGEL ZTE) <[email protected]>
Bluetooth: use memset avoid memory leaks
Luiz Augusto von Dentz <[email protected]>
Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}Harold Huang <[email protected]>
tuntap: add sanity checks about msg_controllen in sendmsg
Sven Eckelmann <[email protected]>
macvtap: advertise link netns via netlink
Hangyu Hua <[email protected]>
mips: ralink: fix a refcount leak in ill_acc_of_setup()
Dust Li <[email protected]>
net/smc: correct settings of RMB window update limit
Xiang Chen <[email protected]>
scsi: hisi_sas: Limit users changing debugfs BIST count value
Qi Liu <[email protected]>
scsi: hisi_sas: Free irq vectors in order for v3 HW
Randy Dunlap <[email protected]>
scsi: aha152x: Fix aha152x_setup() __setup handler return value
Yang Li <[email protected]>
mt76: mt7615: Fix assigning negative values to unsigned variable
Nicholas Piggin <[email protected]>
powerpc/64s/hash: Make hash faults work in NMI context
Johan Almbladh <[email protected]>
mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
Damien Le Moal <[email protected]>
scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix tag leaks on error
Damien Le Moal <[email protected]>
scsi: pm8001: Fix task leak in pm8001_send_abort_all()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
Damien Le Moal <[email protected]>
scsi: pm8001: Fix pm80xx_pci_mem_copy() interface
Alex Williamson <[email protected]>
vfio/pci: Stub vfio_pci_vga_rw when !CONFIG_VFIO_PCI_VGA
Alex Deucher <[email protected]>
drm/amdkfd: make CRAT table missing message informational only
Mike Snitzer <[email protected]>
dm: requeue IO if mapping table not yet available
Jordy Zomer <[email protected]>
dm ioctl: prevent potential spectre v1 gadget
Ido Schimmel <[email protected]>
ipv4: Invalidate neighbour for broadcast address upon address addition
Jiri Kosina <[email protected]>
rtw89: fix RCU usage in rtw89_core_txq_push()
Daniel Thompson <[email protected]>
drm/msm/dsi: Remove spurious IRQF_ONESHOT flag
Miri Korenblit <[email protected]>
iwlwifi: mvm: move only to an enabled channel
Luca Coelho <[email protected]>
iwlwifi: fix small doc mistake for iwl_fw_ini_addr_val
Ilan Peer <[email protected]>
iwlwifi: mvm: Correctly set fragmented EBS
Hans de Goede <[email protected]>
usb: dwc3: pci: Set the swnode from inside dwc3_pci_quirks()
Maxim Mikityanskiy <[email protected]>
net/mlx5e: Disable TX queues before registering the netdev
Sung Joon Kim <[email protected]>
drm/amd/display: reset lane settings after each PHY repeater LT
Hans de Goede <[email protected]>
power: supply: axp288-charger: Set Vhold to 4.4V
Christophe Leroy <[email protected]>
powerpc/set_memory: Avoid spinlock recursion in change_page_attr()
Sreekanth Reddy <[email protected]>
scsi: mpi3mr: Fix memory leaks
Sreekanth Reddy <[email protected]>
scsi: mpi3mr: Fix reporting of actual data transfer size
Manivannan Sadhasivam <[email protected]>
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
Sebastian Andrzej Siewior <[email protected]>
tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.
Hou Zhiqiang <[email protected]>
PCI: endpoint: Fix alignment fault error in copy tests
Marc Zyngier <[email protected]>
KVM: arm64: Do not change the PMU event filter after a VCPU has run
Neal Liu <[email protected]>
usb: ehci: add pci device support for Aspeed platforms
Zhou Guanghui <[email protected]>
iommu/arm-smmu-v3: fix event handling soft lockup
Pali Rohár <[email protected]>
PCI: aardvark: Fix support for MSI interrupts
Mahesh Rajashekhara <[email protected]>
scsi: smartpqi: Fix kdump issue when controller is locked up
Don Brace <[email protected]>
scsi: smartpqi: Fix rmmod stack trace
Rajneesh Bhardwaj <[email protected]>
drm/amdgpu: Fix recursive locking warning
Sourabh Jain <[email protected]>
powerpc: Set crashkernel offset to mid of RMA region
Eric Dumazet <[email protected]>
net: initialize init_net earlier
Eric Dumazet <[email protected]>
ipv6: make mc_forwarding atomic
Yonghong Song <[email protected]>
libbpf: Fix build issue with llvm-readelf
Avraham Stern <[email protected]>
cfg80211: don't add non transmitted BSS to 6GHz scanned channels
Lorenzo Bianconi <[email protected]>
mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
Ben Greear <[email protected]>
mt76: mt7921: fix crash when startup fails.
Evgeny Boger <[email protected]>
power: supply: axp20x_battery: properly report current when discharging
Yongzhi Liu <[email protected]>
drm/v3d: fix missing unlock
Yang Guang <[email protected]>
scsi: bfa: Replace snprintf() with sysfs_emit()
Yang Guang <[email protected]>
scsi: mvsas: Replace snprintf() with sysfs_emit()
Jakub Sitnicki <[email protected]>
bpf: Make dst_port field in struct bpf_sock 16-bit wide
Yongzhi Liu <[email protected]>
drm/bridge: Add missing pm_runtime_put_sync
Tony Lu <[email protected]>
net/smc: Send directly when TCP_CORK is cleared
Kalle Valo <[email protected]>
ath11k: mhi: use mhi_sync_power_up()
Kalle Valo <[email protected]>
ath11k: pci: fix crash on suspend if board file is not found
Venkateswara Naralasetty <[email protected]>
ath11k: fix kernel panic during unload/load ath11k modules
Maxim Kiselev <[email protected]>
powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
Philip Yang <[email protected]>
drm/amdkfd: svm range restore work deadlock when process exit
Philip Yang <[email protected]>
drm/amdkfd: Ensure mm remain valid in svm deferred_list work
Philip Yang <[email protected]>
drm/amdkfd: Don't take process mutex for svm ioctls
Magnus Karlsson <[email protected]>
selftests, xsk: Fix bpf_res cleanup test
Yang Guang <[email protected]>
ptp: replace snprintf with sysfs_emit
Pawel Laszczak <[email protected]>
usb: cdnsp: fix cdnsp_decode_trb function to properly handle ret value
Wayne Chang <[email protected]>
usb: gadget: tegra-xudc: Fix control endpoint's definitions
Wayne Chang <[email protected]>
usb: gadget: tegra-xudc: Do not program SPARAM
Nicholas Kazlauskas <[email protected]>
drm/amd/display: Use PSR version selected during set_psr_caps
Yongzhi Liu <[email protected]>
drm/amd/display: Fix memory leak
Xin Xiong <[email protected]>
drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj
Jani Nikula <[email protected]>
drm/edid: improve non-desktop quirk logging
Philipp Zabel <[email protected]>
drm/edid: remove non_desktop quirk for HPN-3515 and LEN-B800.
Dale Zhao <[email protected]>
drm/amd/display: Add signal type check when verify stream backends same
Zekun Shen <[email protected]>
ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
Anisse Astier <[email protected]>
drm: Add orientation quirk for GPD Win Max
Hou Wenlong <[email protected]>
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
Like Xu <[email protected]>
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
Jim Mattson <[email protected]>
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
Peter Gonda <[email protected]>
KVM: SVM: Fix kvm_cache_regs.h inclusions for is_guest_mode()
Jim Mattson <[email protected]>
KVM: x86/pmu: Use different raw event masks for AMD and Intel
Jiasheng Jiang <[email protected]>
rtc: wm8350: Handle error for wm8350_register_irq
Benjamin Beichler <[email protected]>
um: fix and optimize xor select template for CONFIG64 and timetravel mode
Johannes Berg <[email protected]>
lib/logic_iomem: correct fallback config references
-------------
Diffstat:
Documentation/virt/kvm/devices/vcpu.rst | 2 +- Makefile | 4 +- arch/alpha/kernel/rtc.c | 7 +- arch/arm64/include/asm/cputype.h | 2 + arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kernel/patching.c | 4 +- arch/arm64/kernel/proton-pack.c | 1 + arch/arm64/kernel/smp.c | 2 +- arch/arm64/kvm/arm.c | 4 + arch/arm64/kvm/pmu-emul.c | 33 +- arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- arch/mips/include/asm/setup.h | 2 +- arch/mips/kernel/traps.c | 22 +- arch/mips/ralink/ill_acc.c | 1 + arch/parisc/kernel/patch.c | 25 +- arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 4 +- arch/powerpc/include/asm/interrupt.h | 2 +- arch/powerpc/include/asm/page.h | 6 +- arch/powerpc/kernel/rtas.c | 6 + arch/powerpc/kernel/secvar-sysfs.c | 9 +- arch/powerpc/kexec/core.c | 15 +- arch/powerpc/kvm/book3s_64_entry.S | 10 +- arch/powerpc/mm/book3s64/hash_utils.c | 54 +- arch/powerpc/mm/mem.c | 2 +- arch/powerpc/mm/pageattr.c | 32 +- arch/powerpc/perf/callchain.h | 9 +- arch/powerpc/perf/callchain_64.c | 27 - arch/powerpc/platforms/Kconfig.cputype | 3 +- arch/riscv/lib/memmove.S | 368 +++++++++++--- arch/um/include/asm/xor.h | 4 +- arch/x86/Kconfig | 5 + arch/x86/events/intel/core.c | 8 +- arch/x86/include/asm/bug.h | 4 +- arch/x86/include/asm/irq_stack.h | 3 +- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/include/asm/msi.h | 19 +- arch/x86/include/asm/perf_event.h | 5 + arch/x86/kernel/fpu/xstate.c | 2 +- arch/x86/kernel/hpet.c | 8 +- arch/x86/kernel/static_call.c | 5 +- arch/x86/kvm/emulate.c | 4 +- arch/x86/kvm/kvm_emulate.h | 1 + arch/x86/kvm/pmu.c | 18 +- arch/x86/kvm/svm/avic.c | 7 +- arch/x86/kvm/svm/pmu.c | 9 +- arch/x86/kvm/svm/svm.h | 4 +- arch/x86/kvm/svm/svm_onhyperv.c | 1 - arch/x86/kvm/vmx/pmu_intel.c | 14 +- arch/x86/kvm/x86.c | 6 + arch/x86/mm/tlb.c | 37 +- arch/x86/power/cpu.c | 21 +- arch/x86/xen/smp_hvm.c | 6 + arch/x86/xen/time.c | 24 +- arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi | 8 +- arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi | 8 +- arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi | 4 +- drivers/ata/sata_dwc_460ex.c | 6 +- drivers/base/power/trace.c | 6 +- drivers/block/drbd/drbd_int.h | 8 +- drivers/block/drbd/drbd_main.c | 6 +- drivers/block/drbd/drbd_nl.c | 41 +- drivers/block/drbd/drbd_state.c | 18 +- drivers/block/drbd/drbd_state_change.h | 8 +- drivers/char/virtio_console.c | 8 +- drivers/clk/clk-si5341.c | 16 +- drivers/clk/clk.c | 24 + drivers/clk/mediatek/clk-mt8192.c | 36 +- drivers/clk/rockchip/clk-rk3568.c | 6 +- drivers/clk/ti/clk.c | 13 +- drivers/cpufreq/cppc_cpufreq.c | 43 +- drivers/dma/sh/shdma-base.c | 4 +- drivers/gpio/gpiolib.c | 19 + drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 3 +- drivers/gpu/drm/amd/amdgpu/vcn_v3_0.c | 4 +- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 4 - drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 1 - drivers/gpu/drm/amd/amdkfd/kfd_smi_events.c | 24 +- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 80 +-- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 6 + .../drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 80 ++- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 6 +- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 15 +- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 + .../gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +- .../gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 2 + drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 11 + .../gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c | 8 +- drivers/gpu/drm/bridge/nwl-dsi.c | 18 +- drivers/gpu/drm/drm_edid.c | 19 +- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 + drivers/gpu/drm/imx/dw_hdmi-imx.c | 8 +- drivers/gpu/drm/imx/imx-ldb.c | 2 + drivers/gpu/drm/imx/parallel-display.c | 4 +- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gm20b.c | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp102.c | 2 +- drivers/gpu/drm/nouveau/nvkm/subdev/pmu/gp10b.c | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/pmu/priv.h | 1 + drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 4 +- drivers/gpu/drm/v3d/v3d_gem.c | 6 +- drivers/hv/channel_mgmt.c | 6 +- drivers/hv/vmbus_drv.c | 9 +- drivers/infiniband/core/cm.c | 3 +- drivers/infiniband/hw/hfi1/mmu_rb.c | 6 + drivers/infiniband/hw/mlx5/mr.c | 5 +- drivers/infiniband/sw/rdmavt/qp.c | 6 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 1 + drivers/iommu/omap-iommu.c | 2 +- drivers/irqchip/irq-gic-v3-its.c | 28 +- drivers/irqchip/irq-gic-v3.c | 14 +- drivers/irqchip/irq-gic.c | 6 + drivers/md/dm-ioctl.c | 2 + drivers/md/dm-rq.c | 7 +- drivers/md/dm.c | 11 +- drivers/misc/habanalabs/common/memory.c | 30 +- drivers/misc/habanalabs/common/mmu/mmu_v1.c | 2 +- drivers/mmc/core/block.c | 46 +- drivers/mmc/host/mmci_stm32_sdmmc.c | 6 +- drivers/mmc/host/renesas_sdhi_core.c | 4 +- drivers/mmc/host/sdhci-xenon.c | 10 - drivers/net/can/usb/etas_es58x/es58x_fd.c | 3 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 + drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 +- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +- drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 14 +- drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h | 2 + drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c | 4 +- drivers/net/ethernet/intel/ice/ice.h | 2 +- drivers/net/ethernet/intel/ice/ice_lib.c | 3 + drivers/net/ethernet/intel/ice/ice_main.c | 6 +- drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 4 +- drivers/net/ethernet/intel/ice/ice_xsk.c | 6 +- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 + drivers/net/ethernet/mellanox/mlx5/core/port.c | 23 - drivers/net/ethernet/qlogic/qed/qed_debug.c | 2 +- drivers/net/ethernet/qlogic/qede/qede_fp.c | 3 + drivers/net/ethernet/sfc/efx_channels.c | 148 +++--- drivers/net/ethernet/sfc/rx_common.c | 3 + drivers/net/ethernet/sfc/tx.c | 3 + drivers/net/ethernet/sfc/tx_common.c | 2 + .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +- drivers/net/macvtap.c | 6 + drivers/net/mdio/mdio-mscc-miim.c | 6 + drivers/net/phy/sfp-bus.c | 6 + drivers/net/tap.c | 3 +- drivers/net/tun.c | 3 +- drivers/net/vrf.c | 15 +- drivers/net/wireless/ath/ath11k/ahb.c | 2 + drivers/net/wireless/ath/ath11k/mhi.c | 2 +- drivers/net/wireless/ath/ath11k/pci.c | 10 + drivers/net/wireless/ath/ath5k/eeprom.c | 3 + .../net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h | 5 +- drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c | 31 +- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 +- drivers/net/wireless/mediatek/mt76/dma.c | 1 + drivers/net/wireless/mediatek/mt76/mt76.h | 2 +- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +- drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 1 + drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 + drivers/net/wireless/realtek/rtw89/core.c | 5 +- drivers/opp/debugfs.c | 5 + drivers/opp/opp.h | 1 + drivers/parisc/dino.c | 41 +- drivers/parisc/gsc.c | 31 ++ drivers/parisc/gsc.h | 1 + drivers/parisc/lasi.c | 7 +- drivers/parisc/wax.c | 7 +- drivers/pci/controller/pci-aardvark.c | 16 +- drivers/pci/endpoint/functions/pci-epf-test.c | 14 +- drivers/pci/hotplug/pciehp_hpc.c | 2 + drivers/perf/qcom_l2_pmu.c | 6 +- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +- drivers/phy/amlogic/phy-meson8b-usb2.c | 9 +- drivers/platform/x86/hp-wmi.c | 93 ++-- drivers/power/supply/axp20x_battery.c | 13 +- drivers/power/supply/axp288_charger.c | 14 +- drivers/ptp/ptp_sysfs.c | 4 +- drivers/regulator/atc260x-regulator.c | 1 + drivers/regulator/rtq2134-regulator.c | 1 + drivers/rtc/rtc-cmos.c | 19 +- drivers/rtc/rtc-mc146818-lib.c | 42 +- drivers/rtc/rtc-wm8350.c | 11 +- drivers/scsi/aha152x.c | 6 +- drivers/scsi/bfa/bfad_attr.c | 26 +- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 68 ++- drivers/scsi/libfc/fc_exch.c | 1 + drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +- drivers/scsi/mpi3mr/mpi3mr_os.c | 2 + drivers/scsi/mpt3sas/mpt3sas_scsih.c | 5 +- drivers/scsi/mvsas/mv_init.c | 4 +- drivers/scsi/pm8001/pm8001_hwi.c | 27 +- drivers/scsi/pm8001/pm8001_sas.c | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 17 +- drivers/scsi/scsi_scan.c | 5 + drivers/scsi/sd.c | 2 +- drivers/scsi/smartpqi/smartpqi_init.c | 45 +- drivers/scsi/sr.c | 2 +- drivers/scsi/ufs/ufshcd-pci.c | 17 + drivers/scsi/ufs/ufshpb.c | 11 +- drivers/scsi/zorro7xx.c | 2 + drivers/spi/spi-bcm-qspi.c | 4 +- drivers/spi/spi.c | 4 + .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 + .../vc04_services/interface/vchiq_arm/vchiq_core.c | 6 + drivers/staging/wfx/main.c | 7 +- drivers/tty/serial/samsung_tty.c | 5 +- drivers/usb/cdns3/cdnsp-debug.h | 305 ++++++------ drivers/usb/dwc3/dwc3-omap.c | 2 +- drivers/usb/dwc3/dwc3-pci.c | 11 +- drivers/usb/gadget/udc/tegra-xudc.c | 20 +- drivers/usb/host/ehci-pci.c | 9 + drivers/vdpa/mlx5/net/mlx5_vnet.c | 21 +- drivers/vfio/pci/vfio_pci_rdwr.c | 2 + drivers/vhost/net.c | 1 + drivers/video/fbdev/core/fbmem.c | 9 +- drivers/w1/slaves/w1_therm.c | 8 +- fs/btrfs/extent_io.h | 2 +- fs/btrfs/inode.c | 22 + fs/btrfs/ioctl.c | 20 +- fs/btrfs/volumes.c | 65 ++- fs/btrfs/zoned.c | 9 +- fs/ceph/dir.c | 11 +- fs/ceph/inode.c | 10 +- fs/file_table.c | 1 + fs/io_uring.c | 79 +-- fs/jfs/inode.c | 3 +- fs/minix/inode.c | 3 +- fs/nfs/dir.c | 10 - fs/nfs/direct.c | 48 +- fs/nfs/file.c | 4 +- fs/nfs/inode.c | 1 - fs/nfs/internal.h | 17 + fs/nfs/nfs42proc.c | 9 +- fs/nfs/nfs4file.c | 6 +- fs/nfs/nfs4state.c | 12 + fs/nfs/pagelist.c | 10 +- fs/nfs/pnfs_nfs.c | 8 +- fs/nfs/write.c | 34 +- include/linux/gpio/driver.h | 9 + include/linux/ipv6.h | 2 +- include/linux/mc146818rtc.h | 3 +- include/linux/mmzone.h | 11 +- include/linux/nfs_fs.h | 10 +- include/linux/static_call.h | 5 +- include/linux/vfio_pci_core.h | 9 + include/net/arp.h | 1 + include/net/bluetooth/bluetooth.h | 14 +- include/net/mctp.h | 2 - include/net/net_namespace.h | 6 + include/trace/events/sunrpc.h | 1 - include/uapi/linux/bpf.h | 6 +- include/uapi/linux/can/isotp.h | 28 +- init/main.c | 8 +- kernel/Makefile | 3 +- kernel/events/core.c | 3 + kernel/sched/core.c | 2 +- kernel/static_call.c | 542 +------------------- kernel/static_call_inline.c | 543 +++++++++++++++++++++ lib/Kconfig.debug | 3 +- lib/Kconfig.ubsan | 13 - lib/logic_iomem.c | 8 +- lib/lz4/lz4_decompress.c | 8 +- lib/test_ubsan.c | 22 - mm/highmem.c | 4 +- mm/mempolicy.c | 1 + mm/mremap.c | 3 + mm/rmap.c | 25 +- net/batman-adv/multicast.c | 2 +- net/bluetooth/hci_event.c | 3 +- net/bluetooth/l2cap_core.c | 1 + net/bpf/test_run.c | 4 +- net/can/isotp.c | 12 +- net/core/dev.c | 3 +- net/core/filter.c | 30 +- net/core/net_namespace.c | 17 +- net/core/rtnetlink.c | 13 +- net/core/skbuff.c | 15 +- net/ipv4/arp.c | 9 +- net/ipv4/fib_frontend.c | 5 +- net/ipv4/fib_semantics.c | 7 +- net/ipv4/inet_hashtables.c | 53 +- net/ipv6/addrconf.c | 4 +- net/ipv6/inet6_hashtables.c | 5 +- net/ipv6/ip6_input.c | 2 +- net/ipv6/ip6mr.c | 8 +- net/ipv6/route.c | 2 +- net/mctp/af_mctp.c | 46 +- net/mctp/route.c | 16 +- net/netfilter/nf_conntrack_core.c | 85 +++- net/netlabel/netlabel_kapi.c | 2 + net/openvswitch/actions.c | 2 +- net/openvswitch/flow_netlink.c | 99 +++- net/rxrpc/net_ns.c | 2 +- net/sctp/outqueue.c | 6 +- net/smc/af_smc.c | 8 +- net/smc/smc_core.c | 2 +- net/smc/smc_tx.c | 25 +- net/smc/smc_tx.h | 1 + net/sunrpc/clnt.c | 7 + net/sunrpc/sched.c | 7 - net/sunrpc/svcsock.c | 4 +- net/sunrpc/xprt.c | 23 +- net/sunrpc/xprtrdma/transport.c | 2 +- net/sunrpc/xprtsock.c | 70 ++- net/tls/tls_sw.c | 2 +- net/wireless/scan.c | 9 +- scripts/Makefile.ubsan | 1 - tools/build/feature/Makefile | 9 +- tools/lib/bpf/Makefile | 4 +- tools/perf/Makefile.config | 6 + tools/perf/arch/arm64/util/arm-spe.c | 6 + tools/perf/perf.c | 2 +- tools/perf/util/session.c | 15 +- tools/perf/util/setup.py | 8 +- tools/testing/selftests/bpf/progs/test_sk_lookup.c | 3 +- tools/testing/selftests/bpf/xdpxceiver.c | 80 +-- tools/testing/selftests/bpf/xdpxceiver.h | 2 +- virt/kvm/kvm_main.c | 2 +- 323 files changed, 3428 insertions(+), 2061 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/285 lib/logic_iomem: correct fallback config references
From: Johannes Berg <[email protected]>
[ Upstream commit 2a6852cb8ff0c8c1363cac648d68489343813212 ]
Due to some renaming, we ended up with the "indirect iomem" naming in Kconfig, following INDIRECT_PIO. However, clearly I missed following through on that in the ifdefs, but so far INDIRECT_IOMEM_FALLBACK isn't used by any architecture.
--- lib/logic_iomem.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
lib/logic_iomem.c +4 -4
@@ -68,7 +68,7 @@ int logic_iomem_add_region(struct resource *resource, }EXPORT_SYMBOL (logic_iomem_add_region); -#ifndef CONFIG_LOGIC_IOMEM_FALLBACK +#ifndef CONFIG_INDIRECT_IOMEM_FALLBACK static void __iomem *real_ioremap (phys_addr_t offset,size_t size) { WARN(1, "invalid ioremap(0x%llx, 0x%zx)\n",
@@ -81,7 +81,7 @@ static void real_iounmap(void __iomem *addr)WARN (1 ,"invalid iounmap for addr 0x%llx\n" , (unsigned long long)(uintptr_t __force)addr); } -#endif /* CONFIG_LOGIC_IOMEM_FALLBACK */ +#endif /* CONFIG_INDIRECT_IOMEM_FALLBACK */ void __iomem *ioremap (phys_addr_t offset,size_t size) {
@@ -168,7 +168,7 @@ void iounmap(void __iomem *addr) }EXPORT_SYMBOL (iounmap); -#ifndef CONFIG_LOGIC_IOMEM_FALLBACK +#ifndef CONFIG_INDIRECT_IOMEM_FALLBACK #define MAKE_FALLBACK (op, sz) \ static u##sz real_raw_read ## op(const volatile void __iomem *addr) \ { \
@@ -213,7 +213,7 @@ static void real_memcpy_toio(volatile void __iomem *addr, const void *buffer,WARN (1 ,"Invalid memcpy_toio at address 0x%llx\n" , (unsigned long long)(uintptr_t __force)addr); } -#endif /* CONFIG_LOGIC_IOMEM_FALLBACK */ +#endif /* CONFIG_INDIRECT_IOMEM_FALLBACK */ #define MAKE_OP (op, sz) \ u##sz __raw_read ## op(const volatile void __iomem *addr) \
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 2/285 um: fix and optimize xor select template for CONFIG64 and timetravel mode
In reply to Greg Kroah-HartmanFrom: Benjamin Beichler <[email protected]>
[ Upstream commit e3a33af812c611d99756e2ec61e9d7068d466bdf ]
Due to dropped inclusion of asm-generic/xor.h, xor_block_8regs symbol is missing with CONFIG64 and break compilation, as the asm/xor_64.h also did not include it. The patch recreate the logic from arch/x86, which check whether AVX is available and add fallbacks for 32bit and 64bit config of um.
A very minor additional "fix" is, the return of the macro parameter instead of NULL, as this is the original intent of the macro, but this does not change the actual behavior.
--- arch/um/include/asm/xor.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/um/include/asm/xor.h +3 -1
@@ -4,8 +4,10 @@#ifdef CONFIG_64BIT #undef CONFIG_X86_32 +#define TT_CPU_INF_XOR_DEFAULT (AVX_SELECT(&xor_block_sse_pf64))#else #define CONFIG_X86_32 1 +#define TT_CPU_INF_XOR_DEFAULT (AVX_SELECT(&xor_block_8regs))#endif #include <asm/cpufeature.h>
@@ -16,7 +18,7 @@#undef XOR_SELECT_TEMPLATE/* pick an arbitrary one - measuring isn't possible with inf-cpu */ #define XOR_SELECT_TEMPLATE (x) \ - (time_travel_mode == TT_MODE_INFCPU ? &xor_block_8regs : NULL) + (time_travel_mode == TT_MODE_INFCPU ? TT_CPU_INF_XOR_DEFAULT : x))#endif #endif
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 3/285 rtc: wm8350: Handle error for wm8350_register_irq
In reply to Greg Kroah-HartmanFrom: Jiasheng Jiang <[email protected]>
[ Upstream commit 43f0269b6b89c1eec4ef83c48035608f4dcdd886 ]
As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, it need not free 'wm_rtc->rtc' since it will be freed automatically.
--- drivers/rtc/rtc-wm8350.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/rtc/rtc-wm8350.c +9 -2
@@ -432,14 +432,21 @@ static int wm8350_rtc_probe(struct platform_device *pdev)return ret; } -wm8350_register_irq (wm8350,WM8350_IRQ_RTC_SEC , + ret =wm8350_register_irq (wm8350,WM8350_IRQ_RTC_SEC , wm8350_rtc_update_handler,0 ,"RTC Seconds" , wm8350); +if (ret) +return ret; +wm8350_mask_irq (wm8350,WM8350_IRQ_RTC_SEC ); -wm8350_register_irq (wm8350,WM8350_IRQ_RTC_ALM , + ret =wm8350_register_irq (wm8350,WM8350_IRQ_RTC_ALM , wm8350_rtc_alarm_handler,0 ,"RTC Alarm" , wm8350); +if (ret) { +wm8350_free_irq (wm8350,WM8350_IRQ_RTC_SEC , wm8350); +return ret; + }return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 4/285 KVM: x86/pmu: Use different raw event masks for AMD and Intel
In reply to Greg Kroah-HartmanFrom: Jim Mattson <[email protected]>
[ Upstream commit 95b065bf5c431c06c68056a03a5853b660640ecc ]
The third nybble of AMD's event select overlaps with Intel's IN_TX and IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel platforms that support TSX.
Declare a raw_event_mask in the kvm_pmu structure, initialize it in the vendor-specific pmu_refresh() functions, and use that mask for PERF_TYPE_RAW configurations in reprogram_gp_counter().
Message-Id: <[email protected]>
--- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/pmu.c | 3 ++- arch/x86/kvm/svm/pmu.c | 1 + arch/x86/kvm/vmx/pmu_intel.c | 1 + 4 files changed, 5 insertions(+), 1 deletion(-)
arch/x86/include/asm/kvm_host.h +1 -0
@@ -503,6 +503,7 @@ struct kvm_pmu {u64 global_ctrl_mask;u64 global_ovf_ctrl_mask;u64 reserved_bits; +u64 raw_event_mask;u8 version;struct kvm_pmc gp_counters[INTEL_PMC_MAX_GENERIC ];struct kvm_pmc fixed_counters[INTEL_PMC_MAX_FIXED ];
arch/x86/kvm/pmu.c +2 -1
@@ -178,6 +178,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)struct kvm *kvm = pmc->vcpu->kvm;struct kvm_pmu_event_filter *filter;int i; +struct kvm_pmu *pmu =vcpu_to_pmu (pmc->vcpu);bool allow_event = true;if (eventsel &ARCH_PERFMON_EVENTSEL_PIN_CONTROL )
@@ -217,7 +218,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel) }if (type ==PERF_TYPE_RAW ) - config = eventsel &AMD64_RAW_EVENT_MASK ; + config = eventsel & pmu->raw_event_mask;if (pmc->current_config == eventsel &&pmc_resume_counter (pmc))return ;
arch/x86/kvm/svm/pmu.c +1 -0
@@ -282,6 +282,7 @@ static void amd_pmu_refresh(struct kvm_vcpu *vcpu) pmu->counter_bitmask[KVM_PMC_GP ] = ((u64 )1 <<48 ) -1 ; pmu->reserved_bits =0xfffffff000280000ull ; + pmu->raw_event_mask =AMD64_RAW_EVENT_MASK ; pmu->version =1 ;/* not applicable to AMD; but clean them to prevent any fall out */ pmu->counter_bitmask[KVM_PMC_FIXED ] =0 ;
arch/x86/kvm/vmx/pmu_intel.c +1 -0
@@ -476,6 +476,7 @@ static void intel_pmu_refresh(struct kvm_vcpu *vcpu) pmu->counter_bitmask[KVM_PMC_FIXED ] =0 ; pmu->version =0 ; pmu->reserved_bits =0xffffffff00200000ull ; + pmu->raw_event_mask =X86_RAW_EVENT_MASK ; entry =kvm_find_cpuid_entry (vcpu,0xa ,0 );if (!entry)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 5/285 KVM: SVM: Fix kvm_cache_regs.h inclusions for is_guest_mode()
In reply to Greg Kroah-HartmanFrom: Peter Gonda <[email protected]>
[ Upstream commit 4a9e7b9ea252842bc8b14d495706ac6317fafd5d ]
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(), which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove include from svm_onhpyerv.c which was done only because of lack of include in svm.h.
Message-Id: <[email protected]>
--- arch/x86/kvm/svm/svm.h | 2 ++ arch/x86/kvm/svm/svm_onhyperv.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-)
arch/x86/kvm/svm/svm.h +2 -0
@@ -22,6 +22,8 @@#include <asm/svm.h> #include <asm/sev-common.h> +#include "kvm_cache_regs.h" +#define __sme_page_pa (x) __sme_set(page_to_pfn(x) << PAGE_SHIFT)#define IOPM_SIZE PAGE_SIZE * 3
arch/x86/kvm/svm/svm_onhyperv.c +0 -1
@@ -4,7 +4,6 @@*/ #include <linux/kvm_host.h> -#include "kvm_cache_regs.h" #include <asm/mshyperv.h>
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 6/285 KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
In reply to Greg Kroah-HartmanFrom: Jim Mattson <[email protected]>
[ Upstream commit 9b026073db2f1ad0e4d8b61c83316c8497981037 ]
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some reserved bits are cleared, and some are not. Specifically, on Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP, regardless of which bits are set. However, undocumented bits should not be passed through to the hardware MSR. So, rather than checking for reserved bits and synthesizing a #GP, just clear the reserved bits.
This may seem pedantic, but since KVM currently does not support the "Host/Guest Only" bits (41:40), it is necessary to clear these bits rather than synthesizing #GP, because some popular guests (e.g Linux) will set the "Host Only" bit even on CPUs that don't support EFER.SVME, and they don't expect a #GP.
For example,
root@Ubuntu1804:~# perf stat -e r26 -a sleep 1
Performance counter stats for 'system wide':
0 r26
1.001070977 seconds time elapsedFeb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30) Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace: Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Message-Id: <[email protected]>
--- arch/x86/kvm/svm/pmu.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
arch/x86/kvm/svm/pmu.c +3 -5
@@ -260,12 +260,10 @@ static int amd_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)/* MSR_EVNTSELn */ pmc =get_gp_pmc_amd (pmu, msr,PMU_TYPE_EVNTSEL );if (pmc) { -if (data == pmc->eventsel) -return 0 ; -if (!(data & pmu->reserved_bits)) { + data &= ~pmu->reserved_bits; +if (data != pmc->eventsel)reprogram_gp_counter (pmc, data); -return 0 ; - } +return 0 ; }return 1 ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 7/285 KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
In reply to Greg Kroah-HartmanFrom: Like Xu <[email protected]>
[ Upstream commit e644896f5106aa3f6d7e8c7adf2e4dc0fce53555 ]
HSW_IN_TX* bits are used in generic code which are not supported on AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence using HSW_IN_TX* bits unconditionally in generic code is resulting in unintentional pmu behavior on AMD. For example, if EventSelect[11:8] is 0x2, pmc_reprogram_counter() wrongly assumes that HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX* bit is set in pmc->eventsel, it is already set in attr.config.
Message-Id: <[email protected]>
--- arch/x86/kvm/pmu.c | 15 +++++---------- arch/x86/kvm/vmx/pmu_intel.c | 13 ++++++++++--- 2 files changed, 15 insertions(+), 13 deletions(-)
arch/x86/kvm/pmu.c +5 -10
@@ -96,8 +96,7 @@ static void kvm_perf_overflow_intr(struct perf_event *perf_event,static void pmc_reprogram_counter (struct kvm_pmc *pmc,u32 type,u64 config,bool exclude_user, -bool exclude_kernel,bool intr, -bool in_tx,bool in_tx_cp) +bool exclude_kernel,bool intr) {struct perf_event *event;struct perf_event_attr attr = {
@@ -113,16 +112,14 @@ static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type, attr.sample_period =get_sample_period (pmc, pmc->counter); -if (in_tx) - attr.config |=HSW_IN_TX ; -if (in_tx_cp) { +if ((attr.config &HSW_IN_TX_CHECKPOINTED ) && +guest_cpuid_is_intel (pmc->vcpu)) {/* * HSW_IN_TX_CHECKPOINTED is not supported with nonzero * period. Just clear the sample period so at least * allocating the counter doesn't fail. */ attr.sample_period =0 ; - attr.config |=HSW_IN_TX_CHECKPOINTED ; } event = perf_event_create_kernel_counter(&attr, -1, current,
@@ -229,9 +226,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)pmc_reprogram_counter (pmc, type, config, !(eventsel &ARCH_PERFMON_EVENTSEL_USR ), !(eventsel &ARCH_PERFMON_EVENTSEL_OS ), - eventsel &ARCH_PERFMON_EVENTSEL_INT , - (eventsel &HSW_IN_TX ), - (eventsel &HSW_IN_TX_CHECKPOINTED )); + eventsel &ARCH_PERFMON_EVENTSEL_INT ); }EXPORT_SYMBOL_GPL (reprogram_gp_counter);
@@ -267,7 +262,7 @@ void reprogram_fixed_counter(struct kvm_pmc *pmc, u8 ctrl, int idx) kvm_x86_ops.pmu_ops->find_fixed_event (idx), !(en_field &0x2 ),/* exclude user */ !(en_field &0x1 ),/* exclude kernel */ - pmi, false, false); + pmi); }EXPORT_SYMBOL_GPL (reprogram_fixed_counter);
arch/x86/kvm/vmx/pmu_intel.c +10 -3
@@ -395,6 +395,7 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)struct kvm_pmc *pmc;u32 msr = msr_info->index;u64 data = msr_info->data; +u64 reserved_bits;switch (msr) {case MSR_CORE_PERF_FIXED_CTR_CTRL :
@@ -449,7 +450,11 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) }else if ((pmc =get_gp_pmc (pmu, msr,MSR_P6_EVNTSEL0 ))) {if (data == pmc->eventsel)return 0 ; -if (!(data & pmu->reserved_bits)) { + reserved_bits = pmu->reserved_bits; +if ((pmc->idx ==2 ) && + (pmu->raw_event_mask &HSW_IN_TX_CHECKPOINTED )) + reserved_bits ^=HSW_IN_TX_CHECKPOINTED ; +if (!(data & reserved_bits)) {reprogram_gp_counter (pmc, data);return 0 ; }
@@ -523,8 +528,10 @@ static void intel_pmu_refresh(struct kvm_vcpu *vcpu) entry =kvm_find_cpuid_entry (vcpu,7 ,0 );if (entry && (boot_cpu_has (X86_FEATURE_HLE ) ||boot_cpu_has (X86_FEATURE_RTM )) && - (entry->ebx & (X86_FEATURE_HLE |X86_FEATURE_RTM ))) - pmu->reserved_bits ^=HSW_IN_TX |HSW_IN_TX_CHECKPOINTED ; + (entry->ebx & (X86_FEATURE_HLE |X86_FEATURE_RTM ))) { + pmu->reserved_bits ^=HSW_IN_TX ; + pmu->raw_event_mask |= (HSW_IN_TX |HSW_IN_TX_CHECKPOINTED ); + }bitmap_set (pmu->all_valid_pmc_idx,0 , pmu->nr_arch_gp_counters);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 8/285 KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
In reply to Greg Kroah-HartmanFrom: Hou Wenlong <[email protected]>
[ Upstream commit a836839cbfe60dc434c5476a7429cf2bae36415d ]
When RDTSCP is supported but RDPID is not supported in host, RDPID emulation is available. However, __kvm_get_msr() would only fail when RDTSCP/RDPID both are disabled in guest, so the emulator wouldn't inject a #UD when RDPID is disabled but RDTSCP is enabled in guest.
Message-Id: <1dfd46ae5b76d3ed87bde3154d51c64ea64c99c1.1646226788.git.houwenlong.hwl@antgroup.com>
--- arch/x86/kvm/emulate.c | 4 +++- arch/x86/kvm/kvm_emulate.h | 1 + arch/x86/kvm/x86.c | 6 ++++++ 3 files changed, 10 insertions(+), 1 deletion(-)
arch/x86/kvm/emulate.c +3 -1
@@ -3514,8 +3514,10 @@ static int em_rdpid(struct x86_emulate_ctxt *ctxt) {u64 tsc_aux =0 ; -if (ctxt->ops->get_msr (ctxt,MSR_TSC_AUX , &tsc_aux)) +if (!ctxt->ops->guest_has_rdpid (ctxt))return emulate_ud (ctxt); + + ctxt->ops->get_msr (ctxt,MSR_TSC_AUX , &tsc_aux); ctxt->dst.val = tsc_aux;return X86EMUL_CONTINUE ; }
arch/x86/kvm/kvm_emulate.h +1 -0
@@ -226,6 +226,7 @@ struct x86_emulate_ops {bool (*guest_has_long_mode)(struct x86_emulate_ctxt *ctxt);bool (*guest_has_movbe)(struct x86_emulate_ctxt *ctxt);bool (*guest_has_fxsr)(struct x86_emulate_ctxt *ctxt); +bool (*guest_has_rdpid)(struct x86_emulate_ctxt *ctxt);void (*set_nmi_mask)(struct x86_emulate_ctxt *ctxt,bool masked);
arch/x86/kvm/x86.c +6 -0
@@ -7466,6 +7466,11 @@ static bool emulator_guest_has_fxsr(struct x86_emulate_ctxt *ctxt)return guest_cpuid_has (emul_to_vcpu (ctxt),X86_FEATURE_FXSR ); } +static bool emulator_guest_has_rdpid (struct x86_emulate_ctxt *ctxt) +{ +return guest_cpuid_has (emul_to_vcpu (ctxt),X86_FEATURE_RDPID ); +} +static ulong emulator_read_gpr (struct x86_emulate_ctxt *ctxt,unsigned reg) {return kvm_register_read_raw (emul_to_vcpu (ctxt), reg);
@@ -7548,6 +7553,7 @@ static const struct x86_emulate_ops emulate_ops = { .guest_has_long_mode = emulator_guest_has_long_mode, .guest_has_movbe = emulator_guest_has_movbe, .guest_has_fxsr = emulator_guest_has_fxsr, + .guest_has_rdpid = emulator_guest_has_rdpid, .set_nmi_mask = emulator_set_nmi_mask, .get_hflags = emulator_get_hflags, .exiting_smm = emulator_exiting_smm,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 9/285 drm: Add orientation quirk for GPD Win Max
In reply to Greg Kroah-HartmanFrom: Anisse Astier <[email protected]>
[ Upstream commit 0b464ca3e0dd3cec65f28bc6d396d82f19080f69 ]
Panel is 800x1280, but mounted on a laptop form factor, sideways.
--- drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/gpu/drm/drm_panel_orientation_quirks.c +6 -0
@@ -180,6 +180,12 @@ static const struct dmi_system_id orientation_data[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MicroPC"), }, .driver_data = (void *)&lcd720x1280_rightside_up, + }, { /* GPD Win Max */ + .matches = { +DMI_EXACT_MATCH (DMI_SYS_VENDOR ,"GPD" ), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "G1619-01"), + }, + .driver_data = (void *)&lcd800x1280_rightside_up, }, { /** GPD Pocket, note that the the DMI data is less generic then * it seems, devices with a board-vendor of "AMI Corporation"
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 10/285 ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
In reply to Greg Kroah-HartmanFrom: Zekun Shen <[email protected]>
[ Upstream commit 564d4eceb97eaf381dd6ef6470b06377bb50c95a ]
The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx];
There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops.
The patch is NOT tested with real device.
The following is the fuzzing report
BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0
--- drivers/net/wireless/ath/ath5k/eeprom.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/wireless/ath/ath5k/eeprom.c +3 -0
@@ -746,6 +746,9 @@ ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, } } +if (idx ==AR5K_EEPROM_N_PD_CURVES ) + goto err_out; + ee->ee_pd_gains[mode] =1 ; pd = &chinfo[pier].pd_curves[idx];
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 11/285 drm/amd/display: Add signal type check when verify stream backends same
In reply to Greg Kroah-HartmanFrom: Dale Zhao <[email protected]>
[ Upstream commit 047db281c026de5971cedb5bb486aa29bd16a39d ]
[Why]
For allow eDP hot-plug feature, the stream signal may change to VIRTUAL when plug-out and back to eDP when plug-in. OS will still setPathMode with same timing for each plugging, but eDP gets no stream update as we don't check signal type changing back as keeping it VIRTUAL. It's also unsafe for future cases that stream signal is switched with same timing.
[How]
Check stream signal type change include previous HDMI signal case.
--- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/dc/core/dc_resource.c +3 -0
@@ -1640,6 +1640,9 @@ static bool are_stream_backends_same(if (is_timing_changed (stream_a, stream_b))return false; +if (stream_a->signal != stream_b->signal) +return false; +if (stream_a->dpms_off != stream_b->dpms_off)return false;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 12/285 drm/edid: remove non_desktop quirk for HPN-3515 and LEN-B800.
In reply to Greg Kroah-HartmanFrom: Philipp Zabel <[email protected]>
[ Upstream commit 50dc95d561a2552b0d76a9f91b38005195bf2974 ]
Now that there is support for the Microsoft VSDB for HMDs, remove the non-desktop quirk for two devices that are verified to contain it in their EDID: HPN-3515 and LEN-B800.
Presumably most of the other Windows Mixed Reality headsets contain it as well, but there are ACR-7FCE and SEC-5194 devices without it.
Tested with LEN-B800.
--- drivers/gpu/drm/drm_edid.c | 2 -- 1 file changed, 2 deletions(-)
drivers/gpu/drm/drm_edid.c +0 -2
@@ -212,9 +212,7 @@ static const struct edid_quirk {/* Windows Mixed Reality Headsets */ EDID_QUIRK ('A' ,'C' ,'R' ,0x7fce ,EDID_QUIRK_NON_DESKTOP ), -EDID_QUIRK ('H' ,'P' ,'N' ,0x3515 ,EDID_QUIRK_NON_DESKTOP ),EDID_QUIRK ('L' ,'E' ,'N' ,0x0408 ,EDID_QUIRK_NON_DESKTOP ), -EDID_QUIRK ('L' ,'E' ,'N' ,0xb800 ,EDID_QUIRK_NON_DESKTOP ),EDID_QUIRK ('F' ,'U' ,'J' ,0x1970 ,EDID_QUIRK_NON_DESKTOP ),EDID_QUIRK ('D' ,'E' ,'L' ,0x7fce ,EDID_QUIRK_NON_DESKTOP ), EDID_QUIRK('S', 'E', 'C', 0x144a, EDID_QUIRK_NON_DESKTOP),
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 13/285 drm/edid: improve non-desktop quirk logging
In reply to Greg Kroah-HartmanFrom: Jani Nikula <[email protected]>
[ Upstream commit ce99534e978d4a36787dbe5e5c57749d12e6bf4a ]
Improve non-desktop quirk logging if the EDID indicates non-desktop. If both are set, note about redundant quirk. If there's no quirk but the EDID indicates non-desktop, don't log non-desktop is set to 0.
--- drivers/gpu/drm/drm_edid.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
drivers/gpu/drm/drm_edid.c +10 -7
@@ -5325,17 +5325,13 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi info->width_mm = edid->width_cm *10 ; info->height_mm = edid->height_cm *10 ; - info->non_desktop = !!(quirks &EDID_QUIRK_NON_DESKTOP ); -drm_get_monitor_range (connector, edid); -DRM_DEBUG_KMS ("non_desktop set to %d\n" , info->non_desktop); -if (edid->revision <3 ) -return quirks; + goto out;if (!(edid->input &DRM_EDID_INPUT_DIGITAL )) -return quirks; + goto out; info->color_formats |=DRM_COLOR_FORMAT_RGB444 ;drm_parse_cea_ext (connector, edid);
@@ -5356,7 +5352,7 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi/* Only defined for 1.4 with digital displays */ if (edid->revision <4 ) -return quirks; + goto out;switch (edid->input &DRM_EDID_DIGITAL_DEPTH_MASK ) {case DRM_EDID_DIGITAL_DEPTH_6 :
@@ -5393,6 +5389,13 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edidrm_update_mso (connector, edid); +out: +if (quirks &EDID_QUIRK_NON_DESKTOP ) { +drm_dbg_kms (connector->dev,"Non-desktop display%s\n" , + info->non_desktop ?" (redundant quirk)" :"" ); + info->non_desktop = true; + } +return quirks; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 14/285 drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj
In reply to Greg Kroah-HartmanFrom: Xin Xiong <[email protected]>
[ Upstream commit dfced44f122c500004a48ecc8db516bb6a295a1b ]
This issue takes place in an error path in amdgpu_cs_fence_to_handle_ioctl(). When info->in.what falls into default case, the function simply returns -EINVAL, forgetting to decrement the reference count of a dma_fence obj, which is bumped earlier by amdgpu_cs_get_fence(). This may result in reference count leaks.
Fix it by decreasing the refcount of specific object before returning the error code.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +1 -0
@@ -1510,6 +1510,7 @@ int amdgpu_cs_fence_to_handle_ioctl(struct drm_device *dev, void *data,return 0 ;default : +dma_fence_put (fence);return -EINVAL ; } }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 15/285 drm/amd/display: Fix memory leak
In reply to Greg Kroah-HartmanFrom: Yongzhi Liu <[email protected]>
[ Upstream commit 5d5c6dba2b43e28845d7d7ed32a36802329a5f52 ]
[why]
Resource release is needed on the error handling path to prevent memory leak.
[how]
Fix this by adding kfree on the error handling path.
--- .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 80 ++++++++++++++----- 1 file changed, 60 insertions(+), 20 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +60 -20
@@ -227,8 +227,10 @@ static ssize_t dp_link_settings_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -389,8 +391,10 @@ static ssize_t dp_phy_settings_read(struct file *f, char __user *buf,break ; r =put_user ((*(rd_buf + result)), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -1317,8 +1321,10 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -1334,8 +1340,10 @@ static ssize_t dp_dsc_clock_en_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -1504,8 +1512,10 @@ static ssize_t dp_dsc_slice_width_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -1521,8 +1531,10 @@ static ssize_t dp_dsc_slice_width_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -1689,8 +1701,10 @@ static ssize_t dp_dsc_slice_height_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -1706,8 +1720,10 @@ static ssize_t dp_dsc_slice_height_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -1870,8 +1886,10 @@ static ssize_t dp_dsc_bits_per_pixel_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -1887,8 +1905,10 @@ static ssize_t dp_dsc_bits_per_pixel_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -2046,8 +2066,10 @@ static ssize_t dp_dsc_pic_width_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -2063,8 +2085,10 @@ static ssize_t dp_dsc_pic_width_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -2103,8 +2127,10 @@ static ssize_t dp_dsc_pic_height_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -2120,8 +2146,10 @@ static ssize_t dp_dsc_pic_height_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -2175,8 +2203,10 @@ static ssize_t dp_dsc_chunk_size_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -2192,8 +2222,10 @@ static ssize_t dp_dsc_chunk_size_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -2247,8 +2279,10 @@ static ssize_t dp_dsc_slice_bpg_offset_read(struct file *f, char __user *buf,break ; } -if (!pipe_ctx) +if (!pipe_ctx) { +kfree (rd_buf);return -ENXIO ; + } dsc = pipe_ctx->stream_res.dsc;if (dsc)
@@ -2264,8 +2298,10 @@ static ssize_t dp_dsc_slice_bpg_offset_read(struct file *f, char __user *buf,break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ;
@@ -3255,8 +3291,10 @@ static ssize_t dcc_en_bits_read( dc->hwss.get_dcc_en_bits (dc, dcc_en_bits); rd_buf =kcalloc (rd_buf_size,sizeof (char ),GFP_KERNEL ); -if (!rd_buf) +if (!rd_buf) { +kfree (dcc_en_bits);return -ENOMEM ; + }for (i =0 ; i < num_pipes; i++) offset += snprintf(rd_buf + offset, rd_buf_size - offset,
@@ -3269,8 +3307,10 @@ static ssize_t dcc_en_bits_read(if (*pos >= rd_buf_size)break ; r =put_user (*(rd_buf + result), buf); -if (r) +if (r) { +kfree (rd_buf);return r;/* r = -EFAULT */ + } buf +=1 ; size -=1 ; *pos +=1 ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 16/285 drm/amd/display: Use PSR version selected during set_psr_caps
In reply to Greg Kroah-HartmanFrom: Nicholas Kazlauskas <[email protected]>
[ Upstream commit b80ddeb29d9df449f875f0b6f5de08d7537c02b8 ]
[Why]
If the DPCD caps specifies a PSR version newer than PSR_VERSION_1 then we fallback to using PSR_VERSION_1 in amdgpu_dm_set_psr_caps.
This gets overriden with the raw DPCD value in amdgpu_dm_link_setup_psr, which can result in DMCUB hanging if we pass in an unsupported PSR version number.
[How]
Fix the hang by using link->psr_settings.psr_version directly during amdgpu_dm_link_setup_psr.
--- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_psr.c +2 -4
@@ -74,10 +74,8 @@ bool amdgpu_dm_link_setup_psr(struct dc_stream_state *stream) link = stream->link; - psr_config.psr_version = link->dpcd_caps.psr_caps.psr_version; - -if (psr_config.psr_version >0 ) { - psr_config.psr_exit_link_training_required =0x1 ; +if (link->psr_settings.psr_version !=DC_PSR_VERSION_UNSUPPORTED ) { + psr_config.psr_version = link->psr_settings.psr_version; psr_config.psr_frame_capture_indication_req =0 ; psr_config.psr_rfb_setup_time =0x37 ; psr_config.psr_sdp_transmit_line_num_deadline =0x20 ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 17/285 usb: gadget: tegra-xudc: Do not program SPARAM
In reply to Greg Kroah-HartmanFrom: Wayne Chang <[email protected]>
[ Upstream commit 62fb61580eb48fc890b7bc9fb5fd263367baeca8 ]
According to the Tegra Technical Reference Manual, SPARAM is a read-only register and should not be programmed in the driver.
The change removes the wrong SPARAM usage.
--- drivers/usb/gadget/udc/tegra-xudc.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/usb/gadget/udc/tegra-xudc.c +0 -8
@@ -32,9 +32,6 @@#include <linux/workqueue.h> /* XUSB_DEV registers */ -#define SPARAM 0x000 -#define SPARAM_ERSTMAX_MASK GENMASK(20, 16) -#define SPARAM_ERSTMAX (x) (((x) << 16) & SPARAM_ERSTMAX_MASK)#define DB 0x004#define DB_TARGET_MASK GENMASK(15, 8)#define DB_TARGET (x) (((x) << 8) & DB_TARGET_MASK)
@@ -3295,11 +3292,6 @@ static void tegra_xudc_init_event_ring(struct tegra_xudc *xudc)unsigned int i;u32 val; - val =xudc_readl (xudc,SPARAM ); - val &= ~(SPARAM_ERSTMAX_MASK ); - val |=SPARAM_ERSTMAX (XUDC_NR_EVENT_RINGS ); -xudc_writel (xudc, val,SPARAM ); -for (i =0 ; i <ARRAY_SIZE (xudc->event_ring); i++) {memset (xudc->event_ring[i],0 ,XUDC_EVENT_RING_SIZE *sizeof (*xudc->event_ring[i]));
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 18/285 usb: gadget: tegra-xudc: Fix control endpoints definitions
In reply to Greg Kroah-HartmanFrom: Wayne Chang <[email protected]>
[ Upstream commit 7bd42fb95eb4f98495ccadf467ad15124208ec49 ]
According to the Tegra Technical Reference Manual, the seq_num field of control endpoint is not [31:24] but [31:27]. Bit 24 is reserved and bit 26 is splitxstate.
The change fixes the wrong control endpoint's definitions.
--- drivers/usb/gadget/udc/tegra-xudc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/usb/gadget/udc/tegra-xudc.c +10 -2
@@ -272,8 +272,10 @@ BUILD_EP_CONTEXT_RW(deq_hi, deq_hi, 0, 0xffffffff) BUILD_EP_CONTEXT_RW(avg_trb_len, tx_info, 0, 0xffff) BUILD_EP_CONTEXT_RW(max_esit_payload, tx_info, 16, 0xffff) BUILD_EP_CONTEXT_RW(edtla, rsvd[0], 0, 0xffffff) -BUILD_EP_CONTEXT_RW(seq_num, rsvd[0], 24, 0xff) +BUILD_EP_CONTEXT_RW(rsvd, rsvd[0], 24, 0x1) BUILD_EP_CONTEXT_RW(partial_td, rsvd[0], 25, 0x1) +BUILD_EP_CONTEXT_RW(splitxstate, rsvd[0], 26, 0x1) +BUILD_EP_CONTEXT_RW(seq_num, rsvd[0], 27, 0x1f) BUILD_EP_CONTEXT_RW(cerrcnt, rsvd[1], 18, 0x3) BUILD_EP_CONTEXT_RW(data_offset, rsvd[2], 0, 0x1ffff)BUILD_EP_CONTEXT_RW (numtrbs, rsvd[2 ],22 ,0x1f )
@@ -1554,6 +1556,9 @@ static int __tegra_xudc_ep_set_halt(struct tegra_xudc_ep *ep, bool halt)ep_reload (xudc, ep->index);ep_ctx_write_state (ep->context,EP_STATE_RUNNING ); +ep_ctx_write_rsvd (ep->context,0 ); +ep_ctx_write_partial_td (ep->context,0 ); +ep_ctx_write_splitxstate (ep->context,0 );ep_ctx_write_seq_num (ep->context,0 );ep_reload (xudc, ep->index);
@@ -2809,7 +2814,10 @@ static void tegra_xudc_reset(struct tegra_xudc *xudc) xudc->setup_seq_num =0 ; xudc->queued_setup_packet = false; -ep_ctx_write_seq_num (ep0->context, xudc->setup_seq_num); +ep_ctx_write_rsvd (ep0->context,0 ); +ep_ctx_write_partial_td (ep0->context,0 ); +ep_ctx_write_splitxstate (ep0->context,0 ); +ep_ctx_write_seq_num (ep0->context,0 ); deq_ptr =trb_virt_to_phys (ep0, &ep0->transfer_ring[ep0->deq_ptr]);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 19/285 usb: cdnsp: fix cdnsp_decode_trb function to properly handle ret value
In reply to Greg Kroah-HartmanFrom: Pawel Laszczak <[email protected]>
[ Upstream commit 03db9289b5ab59437e42a111a34545a7cedb5190 ]
Variable ret in function cdnsp_decode_trb is initialized but not used. To fix this compiler warning patch adds checking whether the data buffer has not been overflowed.
--- drivers/usb/cdns3/cdnsp-debug.h | 305 ++++++++++++++++---------------- 1 file changed, 154 insertions(+), 151 deletions(-)
drivers/usb/cdns3/cdnsp-debug.h +154 -151
@@ -182,208 +182,211 @@ static inline const char *cdnsp_decode_trb(char *str, size_t size, u32 field0,int ep_id =TRB_TO_EP_INDEX (field3) -1 ;int type =TRB_FIELD_TO_TYPE (field3);unsigned int ep_num; -int ret =0 ; +int ret;u32 temp; ep_num =DIV_ROUND_UP (ep_id,2 );switch (type) {case TRB_LINK : - ret +=snprintf (str, size, -"LINK %08x%08x intr %ld type '%s' flags %c:%c:%c:%c" , - field1, field0,GET_INTR_TARGET (field2), -cdnsp_trb_type_string (type), - field3 &TRB_IOC ?'I' :'i' , - field3 &TRB_CHAIN ?'C' :'c' , - field3 &TRB_TC ?'T' :'t' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"LINK %08x%08x intr %ld type '%s' flags %c:%c:%c:%c" , + field1, field0,GET_INTR_TARGET (field2), +cdnsp_trb_type_string (type), + field3 &TRB_IOC ?'I' :'i' , + field3 &TRB_CHAIN ?'C' :'c' , + field3 &TRB_TC ?'T' :'t' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_TRANSFER :case TRB_COMPLETION :case TRB_PORT_STATUS :case TRB_HC_EVENT : - ret +=snprintf (str, size, -"ep%d%s(%d) type '%s' TRB %08x%08x status '%s'" -" len %ld slot %ld flags %c:%c" , - ep_num, ep_id %2 ?"out" :"in" , -TRB_TO_EP_INDEX (field3), -cdnsp_trb_type_string (type), field1, field0, -cdnsp_trb_comp_code_string (GET_COMP_CODE (field2)), -EVENT_TRB_LEN (field2),TRB_TO_SLOT_ID (field3), - field3 &EVENT_DATA ?'E' :'e' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"ep%d%s(%d) type '%s' TRB %08x%08x status '%s'" +" len %ld slot %ld flags %c:%c" , + ep_num, ep_id %2 ?"out" :"in" , +TRB_TO_EP_INDEX (field3), +cdnsp_trb_type_string (type), field1, field0, +cdnsp_trb_comp_code_string (GET_COMP_CODE (field2)), +EVENT_TRB_LEN (field2),TRB_TO_SLOT_ID (field3), + field3 &EVENT_DATA ?'E' :'e' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_MFINDEX_WRAP : - ret +=snprintf (str, size,"%s: flags %c" , -cdnsp_trb_type_string (type), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size,"%s: flags %c" , +cdnsp_trb_type_string (type), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_SETUP : - ret +=snprintf (str, size, -"type '%s' bRequestType %02x bRequest %02x " -"wValue %02x%02x wIndex %02x%02x wLength %d " -"length %ld TD size %ld intr %ld Setup ID %ld " -"flags %c:%c:%c" , -cdnsp_trb_type_string (type), - field0 &0xff , - (field0 &0xff00 ) >>8 , - (field0 &0xff000000 ) >>24 , - (field0 &0xff0000 ) >>16 , - (field1 &0xff00 ) >>8 , - field1 &0xff , - (field1 &0xff000000 ) >>16 | - (field1 &0xff0000 ) >>16 , -TRB_LEN (field2),GET_TD_SIZE (field2), -GET_INTR_TARGET (field2), -TRB_SETUPID_TO_TYPE (field3), - field3 &TRB_IDT ?'D' :'d' , - field3 &TRB_IOC ?'I' :'i' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"type '%s' bRequestType %02x bRequest %02x " +"wValue %02x%02x wIndex %02x%02x wLength %d " +"length %ld TD size %ld intr %ld Setup ID %ld " +"flags %c:%c:%c" , +cdnsp_trb_type_string (type), + field0 &0xff , + (field0 &0xff00 ) >>8 , + (field0 &0xff000000 ) >>24 , + (field0 &0xff0000 ) >>16 , + (field1 &0xff00 ) >>8 , + field1 &0xff , + (field1 &0xff000000 ) >>16 | + (field1 &0xff0000 ) >>16 , +TRB_LEN (field2),GET_TD_SIZE (field2), +GET_INTR_TARGET (field2), +TRB_SETUPID_TO_TYPE (field3), + field3 &TRB_IDT ?'D' :'d' , + field3 &TRB_IOC ?'I' :'i' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_DATA : - ret +=snprintf (str, size, -"type '%s' Buffer %08x%08x length %ld TD size %ld " -"intr %ld flags %c:%c:%c:%c:%c:%c:%c" , -cdnsp_trb_type_string (type), - field1, field0,TRB_LEN (field2), -GET_TD_SIZE (field2), -GET_INTR_TARGET (field2), - field3 &TRB_IDT ?'D' :'i' , - field3 &TRB_IOC ?'I' :'i' , - field3 &TRB_CHAIN ?'C' :'c' , - field3 &TRB_NO_SNOOP ?'S' :'s' , - field3 &TRB_ISP ?'I' :'i' , - field3 &TRB_ENT ?'E' :'e' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"type '%s' Buffer %08x%08x length %ld TD size %ld " +"intr %ld flags %c:%c:%c:%c:%c:%c:%c" , +cdnsp_trb_type_string (type), + field1, field0,TRB_LEN (field2), +GET_TD_SIZE (field2), +GET_INTR_TARGET (field2), + field3 &TRB_IDT ?'D' :'i' , + field3 &TRB_IOC ?'I' :'i' , + field3 &TRB_CHAIN ?'C' :'c' , + field3 &TRB_NO_SNOOP ?'S' :'s' , + field3 &TRB_ISP ?'I' :'i' , + field3 &TRB_ENT ?'E' :'e' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_STATUS : - ret +=snprintf (str, size, -"Buffer %08x%08x length %ld TD size %ld intr" -"%ld type '%s' flags %c:%c:%c:%c" , - field1, field0,TRB_LEN (field2), -GET_TD_SIZE (field2), -GET_INTR_TARGET (field2), -cdnsp_trb_type_string (type), - field3 &TRB_IOC ?'I' :'i' , - field3 &TRB_CHAIN ?'C' :'c' , - field3 &TRB_ENT ?'E' :'e' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"Buffer %08x%08x length %ld TD size %ld intr" +"%ld type '%s' flags %c:%c:%c:%c" , + field1, field0,TRB_LEN (field2), +GET_TD_SIZE (field2), +GET_INTR_TARGET (field2), +cdnsp_trb_type_string (type), + field3 &TRB_IOC ?'I' :'i' , + field3 &TRB_CHAIN ?'C' :'c' , + field3 &TRB_ENT ?'E' :'e' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_NORMAL :case TRB_ISOC :case TRB_EVENT_DATA :case TRB_TR_NOOP : - ret +=snprintf (str, size, -"type '%s' Buffer %08x%08x length %ld " -"TD size %ld intr %ld " -"flags %c:%c:%c:%c:%c:%c:%c:%c:%c" , -cdnsp_trb_type_string (type), - field1, field0,TRB_LEN (field2), -GET_TD_SIZE (field2), -GET_INTR_TARGET (field2), - field3 &TRB_BEI ?'B' :'b' , - field3 &TRB_IDT ?'T' :'t' , - field3 &TRB_IOC ?'I' :'i' , - field3 &TRB_CHAIN ?'C' :'c' , - field3 &TRB_NO_SNOOP ?'S' :'s' , - field3 &TRB_ISP ?'I' :'i' , - field3 &TRB_ENT ?'E' :'e' , - field3 &TRB_CYCLE ?'C' :'c' , - !(field3 &TRB_EVENT_INVALIDATE ) ?'V' :'v' ); + ret =snprintf (str, size, +"type '%s' Buffer %08x%08x length %ld " +"TD size %ld intr %ld " +"flags %c:%c:%c:%c:%c:%c:%c:%c:%c" , +cdnsp_trb_type_string (type), + field1, field0,TRB_LEN (field2), +GET_TD_SIZE (field2), +GET_INTR_TARGET (field2), + field3 &TRB_BEI ?'B' :'b' , + field3 &TRB_IDT ?'T' :'t' , + field3 &TRB_IOC ?'I' :'i' , + field3 &TRB_CHAIN ?'C' :'c' , + field3 &TRB_NO_SNOOP ?'S' :'s' , + field3 &TRB_ISP ?'I' :'i' , + field3 &TRB_ENT ?'E' :'e' , + field3 &TRB_CYCLE ?'C' :'c' , + !(field3 &TRB_EVENT_INVALIDATE ) ?'V' :'v' );break ;case TRB_CMD_NOOP :case TRB_ENABLE_SLOT : - ret +=snprintf (str, size,"%s: flags %c" , -cdnsp_trb_type_string (type), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size,"%s: flags %c" , +cdnsp_trb_type_string (type), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_DISABLE_SLOT : - ret +=snprintf (str, size,"%s: slot %ld flags %c" , -cdnsp_trb_type_string (type), -TRB_TO_SLOT_ID (field3), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size,"%s: slot %ld flags %c" , +cdnsp_trb_type_string (type), +TRB_TO_SLOT_ID (field3), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_ADDR_DEV : - ret +=snprintf (str, size, -"%s: ctx %08x%08x slot %ld flags %c:%c" , -cdnsp_trb_type_string (type), field1, field0, -TRB_TO_SLOT_ID (field3), - field3 &TRB_BSR ?'B' :'b' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"%s: ctx %08x%08x slot %ld flags %c:%c" , +cdnsp_trb_type_string (type), field1, field0, +TRB_TO_SLOT_ID (field3), + field3 &TRB_BSR ?'B' :'b' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_CONFIG_EP : - ret +=snprintf (str, size, -"%s: ctx %08x%08x slot %ld flags %c:%c" , -cdnsp_trb_type_string (type), field1, field0, -TRB_TO_SLOT_ID (field3), - field3 &TRB_DC ?'D' :'d' , - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"%s: ctx %08x%08x slot %ld flags %c:%c" , +cdnsp_trb_type_string (type), field1, field0, +TRB_TO_SLOT_ID (field3), + field3 &TRB_DC ?'D' :'d' , + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_EVAL_CONTEXT : - ret +=snprintf (str, size, -"%s: ctx %08x%08x slot %ld flags %c" , -cdnsp_trb_type_string (type), field1, field0, -TRB_TO_SLOT_ID (field3), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"%s: ctx %08x%08x slot %ld flags %c" , +cdnsp_trb_type_string (type), field1, field0, +TRB_TO_SLOT_ID (field3), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_RESET_EP :case TRB_HALT_ENDPOINT :case TRB_FLUSH_ENDPOINT : - ret +=snprintf (str, size, -"%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c" , -cdnsp_trb_type_string (type), - ep_num, ep_id %2 ?"out" :"in" , -TRB_TO_EP_INDEX (field3), field1, field0, -TRB_TO_SLOT_ID (field3), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"%s: ep%d%s(%d) ctx %08x%08x slot %ld flags %c" , +cdnsp_trb_type_string (type), + ep_num, ep_id %2 ?"out" :"in" , +TRB_TO_EP_INDEX (field3), field1, field0, +TRB_TO_SLOT_ID (field3), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_STOP_RING : - ret +=snprintf (str, size, -"%s: ep%d%s(%d) slot %ld sp %d flags %c" , -cdnsp_trb_type_string (type), - ep_num, ep_id %2 ?"out" :"in" , -TRB_TO_EP_INDEX (field3), -TRB_TO_SLOT_ID (field3), -TRB_TO_SUSPEND_PORT (field3), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"%s: ep%d%s(%d) slot %ld sp %d flags %c" , +cdnsp_trb_type_string (type), + ep_num, ep_id %2 ?"out" :"in" , +TRB_TO_EP_INDEX (field3), +TRB_TO_SLOT_ID (field3), +TRB_TO_SUSPEND_PORT (field3), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_SET_DEQ : - ret +=snprintf (str, size, -"%s: ep%d%s(%d) deq %08x%08x stream %ld slot %ld flags %c" , -cdnsp_trb_type_string (type), - ep_num, ep_id %2 ?"out" :"in" , -TRB_TO_EP_INDEX (field3), field1, field0, -TRB_TO_STREAM_ID (field2), -TRB_TO_SLOT_ID (field3), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size, +"%s: ep%d%s(%d) deq %08x%08x stream %ld slot %ld flags %c" , +cdnsp_trb_type_string (type), + ep_num, ep_id %2 ?"out" :"in" , +TRB_TO_EP_INDEX (field3), field1, field0, +TRB_TO_STREAM_ID (field2), +TRB_TO_SLOT_ID (field3), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_RESET_DEV : - ret +=snprintf (str, size,"%s: slot %ld flags %c" , -cdnsp_trb_type_string (type), -TRB_TO_SLOT_ID (field3), - field3 &TRB_CYCLE ?'C' :'c' ); + ret =snprintf (str, size,"%s: slot %ld flags %c" , +cdnsp_trb_type_string (type), +TRB_TO_SLOT_ID (field3), + field3 &TRB_CYCLE ?'C' :'c' );break ;case TRB_ENDPOINT_NRDY : - temp =TRB_TO_HOST_STREAM (field2); - - ret +=snprintf (str, size, -"%s: ep%d%s(%d) H_SID %x%s%s D_SID %lx flags %c:%c" , -cdnsp_trb_type_string (type), - ep_num, ep_id %2 ?"out" :"in" , -TRB_TO_EP_INDEX (field3), temp, - temp ==STREAM_PRIME_ACK ?"(PRIME)" :"" , - temp ==STREAM_REJECTED ?"(REJECTED)" :"" , -TRB_TO_DEV_STREAM (field0), - field3 &TRB_STAT ?'S' :'s' , - field3 &TRB_CYCLE ?'C' :'c' ); + temp =TRB_TO_HOST_STREAM (field2); + + ret =snprintf (str, size, +"%s: ep%d%s(%d) H_SID %x%s%s D_SID %lx flags %c:%c" , +cdnsp_trb_type_string (type), + ep_num, ep_id %2 ?"out" :"in" , +TRB_TO_EP_INDEX (field3), temp, + temp ==STREAM_PRIME_ACK ?"(PRIME)" :"" , + temp ==STREAM_REJECTED ?"(REJECTED)" :"" , +TRB_TO_DEV_STREAM (field0), + field3 &TRB_STAT ?'S' :'s' , + field3 &TRB_CYCLE ?'C' :'c' );break ;default : - ret +=snprintf (str, size, -"type '%s' -> raw %08x %08x %08x %08x" , -cdnsp_trb_type_string (type), - field0, field1, field2, field3); + ret =snprintf (str, size, +"type '%s' -> raw %08x %08x %08x %08x" , +cdnsp_trb_type_string (type), + field0, field1, field2, field3); } +if (ret >= size) +pr_info ("CDNSP: buffer overflowed.\n" ); +return str; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 20/285 ptp: replace snprintf with sysfs_emit
In reply to Greg Kroah-HartmanFrom: Yang Guang <[email protected]>
[ Upstream commit e2cf07654efb0fd7bbcb475c6f74be7b5755a8fd ]
coccinelle report:
./drivers/ptp/ptp_sysfs.c:17:8-16:
WARNING: use scnprintf or sprintf
./drivers/ptp/ptp_sysfs.c:390:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
--- drivers/ptp/ptp_sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/ptp/ptp_sysfs.c +2 -2
@@ -14,7 +14,7 @@ static ssize_t clock_name_show(struct device *dev, struct device_attribute *attr, char *page) { struct ptp_clock *ptp = dev_get_drvdata(dev); -return snprintf (page,PAGE_SIZE -1 ,"%s\n" , ptp->info->name); +return sysfs_emit (page,"%s\n" , ptp->info->name); }static DEVICE_ATTR_RO (clock_name);
@@ -387,7 +387,7 @@ static ssize_t ptp_pin_show(struct device *dev, struct device_attribute *attr,mutex_unlock (&ptp->pincfg_mux); -return snprintf (page,PAGE_SIZE ,"%u %u\n" , func, chan); +return sysfs_emit (page,"%u %u\n" , func, chan); } static ssize_t ptp_pin_store(struct device *dev, struct device_attribute *attr,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 21/285 selftests, xsk: Fix bpf_res cleanup test
In reply to Greg Kroah-HartmanFrom: Magnus Karlsson <[email protected]>
[ Upstream commit 3b22523bca02b0d5618c08b93d8fd1fb578e1cc3 ]
After commit 710ad98c363a ("veth: Do not record rx queue hint in veth_xmit"), veth no longer receives traffic on the same queue as it was sent on. This breaks the bpf_res test for the AF_XDP selftests as the socket tied to queue 1 will not receive traffic anymore.
Modify the test so that two sockets are tied to queue id 0 using a shared umem instead. When killing the first socket enter the second socket into the xskmap so that traffic will flow to it. This will still test that the resources are not cleaned up until after the second socket dies, without having to rely on veth supporting rx_queue hints.
--- tools/testing/selftests/bpf/xdpxceiver.c | 80 +++++++++++++++--------- tools/testing/selftests/bpf/xdpxceiver.h | 2 +- 2 files changed, 50 insertions(+), 32 deletions(-)
tools/testing/selftests/bpf/xdpxceiver.c +49 -31
@@ -260,22 +260,24 @@ static int xsk_configure_umem(struct xsk_umem_info *umem, void *buffer, u64 size }static int xsk_configure_socket (struct xsk_socket_info *xsk,struct xsk_umem_info *umem, -struct ifobject *ifobject,u32 qid) +struct ifobject *ifobject,bool shared) { -struct xsk_socket_config cfg; +struct xsk_socket_config cfg = {};struct xsk_ring_cons *rxr;struct xsk_ring_prod *txr; xsk->umem = umem; cfg.rx_size = xsk->rxqsize; cfg.tx_size =XSK_RING_PROD__DEFAULT_NUM_DESCS ; - cfg.libbpf_flags =0 ; + cfg.libbpf_flags =XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD ; cfg.xdp_flags = ifobject->xdp_flags; cfg.bind_flags = ifobject->bind_flags; +if (shared) + cfg.bind_flags |=XDP_SHARED_UMEM ; txr = ifobject->tx_on ? &xsk->tx :NULL ; rxr = ifobject->rx_on ? &xsk->rx :NULL ; -return xsk_socket__create (&xsk->xsk, ifobject->ifname, qid, umem->umem, rxr, txr, &cfg); +return xsk_socket__create (&xsk->xsk, ifobject->ifname,0 , umem->umem, rxr, txr, &cfg); }static struct option long_options[] = {
@@ -381,7 +383,6 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx,for (i =0 ; i <MAX_INTERFACES ; i++) {struct ifobject *ifobj = i ? ifobj_rx : ifobj_tx; - ifobj->umem = &ifobj->umem_arr[0 ]; ifobj->xsk = &ifobj->xsk_arr[0 ]; ifobj->use_poll = false; ifobj->pacing_on = true;
@@ -395,11 +396,12 @@ static void __test_spec_init(struct test_spec *test, struct ifobject *ifobj_tx, ifobj->tx_on = false; } +memset (ifobj->umem,0 ,sizeof (*ifobj->umem)); + ifobj->umem->num_frames =DEFAULT_UMEM_BUFFERS ; + ifobj->umem->frame_size =XSK_UMEM__DEFAULT_FRAME_SIZE ; +for (j =0 ; j <MAX_SOCKETS ; j++) { -memset (&ifobj->umem_arr[j],0 ,sizeof (ifobj->umem_arr[j]));memset (&ifobj->xsk_arr[j],0 ,sizeof (ifobj->xsk_arr[j])); - ifobj->umem_arr[j].num_frames =DEFAULT_UMEM_BUFFERS ; - ifobj->umem_arr[j].frame_size =XSK_UMEM__DEFAULT_FRAME_SIZE ; ifobj->xsk_arr[j].rxqsize =XSK_RING_CONS__DEFAULT_NUM_DESCS ; } }
@@ -946,7 +948,10 @@ static void tx_stats_validate(struct ifobject *ifobject)static void thread_common_ops (struct test_spec *test,struct ifobject *ifobject) { +u64 umem_sz = ifobject->umem->num_frames * ifobject->umem->frame_size;int mmap_flags =MAP_PRIVATE |MAP_ANONYMOUS |MAP_NORESERVE ; +int ret, ifindex; +void *bufs;u32 i; ifobject->ns_fd =switch_namespace (ifobject->nsname);
@@ -954,23 +959,20 @@ static void thread_common_ops(struct test_spec *test, struct ifobject *ifobject)if (ifobject->umem->unaligned_mode) mmap_flags |=MAP_HUGETLB ; -for (i =0 ; i < test->nb_sockets; i++) { -u64 umem_sz = ifobject->umem->num_frames * ifobject->umem->frame_size; -u32 ctr =0 ; -void *bufs; -int ret; + bufs =mmap (NULL , umem_sz,PROT_READ |PROT_WRITE , mmap_flags,-1 ,0 ); +if (bufs ==MAP_FAILED ) +exit_with_error (errno); - bufs =mmap (NULL , umem_sz,PROT_READ |PROT_WRITE , mmap_flags,-1 ,0 ); -if (bufs ==MAP_FAILED ) -exit_with_error (errno); + ret =xsk_configure_umem (ifobject->umem, bufs, umem_sz); +if (ret) +exit_with_error (-ret); - ret =xsk_configure_umem (&ifobject->umem_arr[i], bufs, umem_sz); -if (ret) -exit_with_error (-ret); +for (i =0 ; i < test->nb_sockets; i++) { +u32 ctr =0 ;while (ctr++ <SOCK_RECONF_CTR ) { - ret =xsk_configure_socket (&ifobject->xsk_arr[i], &ifobject->umem_arr[i], - ifobject, i); + ret =xsk_configure_socket (&ifobject->xsk_arr[i], ifobject->umem, + ifobject, !!i);if (!ret)break ;
@@ -981,8 +983,22 @@ static void thread_common_ops(struct test_spec *test, struct ifobject *ifobject) } } - ifobject->umem = &ifobject->umem_arr[0 ]; ifobject->xsk = &ifobject->xsk_arr[0 ]; + +if (!ifobject->rx_on) +return ; + + ifindex =if_nametoindex (ifobject->ifname); +if (!ifindex) +exit_with_error (errno); + + ret =xsk_setup_xdp_prog (ifindex, &ifobject->xsk_map_fd); +if (ret) +exit_with_error (-ret); + + ret =xsk_socket__update_xskmap (ifobject->xsk->xsk, ifobject->xsk_map_fd); +if (ret) +exit_with_error (-ret); }static void testapp_cleanup_xsk_res (struct ifobject *ifobj)
@@ -1138,14 +1154,16 @@ static void testapp_bidi(struct test_spec *test)static void swap_xsk_resources (struct ifobject *ifobj_tx,struct ifobject *ifobj_rx) { +int ret; +xsk_socket__delete (ifobj_tx->xsk->xsk); -xsk_umem__delete (ifobj_tx->umem->umem);xsk_socket__delete (ifobj_rx->xsk->xsk); -xsk_umem__delete (ifobj_rx->umem->umem); - ifobj_tx->umem = &ifobj_tx->umem_arr[1 ]; ifobj_tx->xsk = &ifobj_tx->xsk_arr[1 ]; - ifobj_rx->umem = &ifobj_rx->umem_arr[1 ]; ifobj_rx->xsk = &ifobj_rx->xsk_arr[1 ]; + + ret =xsk_socket__update_xskmap (ifobj_rx->xsk->xsk, ifobj_rx->xsk_map_fd); +if (ret) +exit_with_error (-ret); }static void testapp_bpf_res (struct test_spec *test)
@@ -1404,13 +1422,13 @@ static struct ifobject *ifobject_create(void)if (!ifobj->xsk_arr) goto out_xsk_arr; - ifobj->umem_arr =calloc (MAX_SOCKETS ,sizeof (*ifobj->umem_arr)); -if (!ifobj->umem_arr) - goto out_umem_arr; + ifobj->umem =calloc (1 ,sizeof (*ifobj->umem)); +if (!ifobj->umem) + goto out_umem;return ifobj; -out_umem_arr: +out_umem:free (ifobj->xsk_arr); out_xsk_arr:free (ifobj);
@@ -1419,7 +1437,7 @@ static struct ifobject *ifobject_create(void)static void ifobject_delete (struct ifobject *ifobj) { -free (ifobj->umem_arr); +free (ifobj->umem);free (ifobj->xsk_arr);free (ifobj); }
tools/testing/selftests/bpf/xdpxceiver.h +1 -1
@@ -125,10 +125,10 @@ struct ifobject {struct xsk_socket_info *xsk;struct xsk_socket_info *xsk_arr;struct xsk_umem_info *umem; -struct xsk_umem_info *umem_arr;thread_func_t func_ptr;struct pkt_stream *pkt_stream;int ns_fd; +int xsk_map_fd;u32 dst_ip;u32 src_ip;u32 xdp_flags;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 22/285 drm/amdkfd: Dont take process mutex for svm ioctls
In reply to Greg Kroah-HartmanFrom: Philip Yang <[email protected]>
[ Upstream commit ac7c48c0cce00d03b3c95fddcccb0a45257e33e3 ]
SVM ioctls take proper svms->lock to handle race conditions, don't need take process mutex to serialize ioctls. This also fixes circular locking warning:
WARNING: possible circular locking dependency detected
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&svms->deferred_list_work));
lock(&process->mutex);
lock((work_completion)(&svms->deferred_list_work)); lock(&process->mutex);
*** DEADLOCK ***
--- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +0 -4
@@ -1840,13 +1840,9 @@ static int kfd_ioctl_svm(struct file *filep, struct kfd_process *p, void *data)if (!args->start_addr || !args->size)return -EINVAL ; -mutex_lock (&p->mutex); - r =svm_ioctl (p, args->op, args->start_addr, args->size, args->nattr, args->attrs); -mutex_unlock (&p->mutex); - return r; }#else
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 23/285 drm/amdkfd: Ensure mm remain valid in svm deferred_list work
In reply to Greg Kroah-HartmanFrom: Philip Yang <[email protected]>
[ Upstream commit 367c9b0f1b8750a704070e7ae85234d591290434 ]
svm_deferred_list work should continue to handle deferred_range_list which maybe split to child range to avoid child range leak, and remove ranges mmu interval notifier to avoid mm mm_count leak. So taking mm reference when adding range to deferred list, to ensure mm is valid in the scheduled deferred_list_work, and drop the mm referrence after range is handled.
--- drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 62 ++++++++++++++++------------ 1 file changed, 36 insertions(+), 26 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_svm.c +36 -26
@@ -1926,10 +1926,9 @@ svm_range_update_notifier_and_interval_tree(struct mm_struct *mm, }static void -svm_range_handle_list_op (struct svm_range_list *svms,struct svm_range *prange) +svm_range_handle_list_op (struct svm_range_list *svms,struct svm_range *prange, +struct mm_struct *mm) { -struct mm_struct *mm = prange->work_item.mm; -switch (prange->work_item.op) {case SVM_OP_NULL : pr_debug("NULL OP 0x%p prange 0x%p [0x%lx 0x%lx]\n",
@@ -2013,34 +2012,41 @@ static void svm_range_deferred_list_work(struct work_struct *work)pr_debug ("enter svms 0x%p\n" , svms); p = container_of(svms, struct kfd_process, svms); -/* Avoid mm is gone when inserting mmu notifier */ - mm =get_task_mm (p->lead_thread); -if (!mm) { -pr_debug ("svms 0x%p process mm gone\n" , svms); -return ; - } -retry: -mmap_write_lock (mm); - -/* Checking for the need to drain retry faults must be inside -* mmap write lock to serialize with munmap notifiers. -*/ -if (unlikely (atomic_read (&svms->drain_pagefaults))) { -mmap_write_unlock (mm); -svm_range_drain_retry_fault (svms); - goto retry; - }spin_lock (&svms->deferred_list_lock);while (!list_empty (&svms->deferred_range_list)) { prange =list_first_entry (&svms->deferred_range_list, struct svm_range, deferred_list); -list_del_init (&prange->deferred_list);spin_unlock (&svms->deferred_list_lock);pr_debug ("prange 0x%p [0x%lx 0x%lx] op %d\n" , prange, prange->start, prange->last, prange->work_item.op); + mm = prange->work_item.mm; +retry: +mmap_write_lock (mm); + +/* Checking for the need to drain retry faults must be inside +* mmap write lock to serialize with munmap notifiers. +*/ +if (unlikely (atomic_read (&svms->drain_pagefaults))) { +mmap_write_unlock (mm); +svm_range_drain_retry_fault (svms); + goto retry; + } + +/* Remove from deferred_list must be inside mmap write lock, for +* two race cases: +* 1. unmap_from_cpu may change work_item.op and add the range +* to deferred_list again, cause use after free bug. +* 2. svm_range_list_lock_and_flush_work may hold mmap write +* lock and continue because deferred_list is empty, but +* deferred_list work is actually waiting for mmap lock. +*/ +spin_lock (&svms->deferred_list_lock); +list_del_init (&prange->deferred_list); +spin_unlock (&svms->deferred_list_lock); +mutex_lock (&svms->lock);mutex_lock (&prange->migrate_mutex);while (!list_empty (&prange->child_list)) {
@@ -2051,19 +2057,20 @@ static void svm_range_deferred_list_work(struct work_struct *work)pr_debug ("child prange 0x%p op %d\n" , pchild, pchild->work_item.op);list_del_init (&pchild->child_list); -svm_range_handle_list_op (svms, pchild); +svm_range_handle_list_op (svms, pchild, mm); }mutex_unlock (&prange->migrate_mutex); -svm_range_handle_list_op (svms, prange); +svm_range_handle_list_op (svms, prange, mm);mutex_unlock (&svms->lock); +mmap_write_unlock (mm); + +/* Pairs with mmget in svm_range_add_list_work */ +mmput (mm);spin_lock (&svms->deferred_list_lock); }spin_unlock (&svms->deferred_list_lock); - -mmap_write_unlock (mm); -mmput (mm);pr_debug ("exit svms 0x%p\n" , svms); }
@@ -2081,6 +2088,9 @@ svm_range_add_list_work(struct svm_range_list *svms, struct svm_range *prange, prange->work_item.op = op; }else { prange->work_item.op = op; + +/* Pairs with mmput in deferred_list_work */ +mmget (mm); prange->work_item.mm = mm;list_add_tail (&prange->deferred_list, &prange->svms->deferred_range_list);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 24/285 drm/amdkfd: svm range restore work deadlock when process exit
In reply to Greg Kroah-HartmanFrom: Philip Yang <[email protected]>
[ Upstream commit 6225bb3a88d22594aacea2485dc28ca12d596721 ]
kfd_process_notifier_release flush svm_range_restore_work which calls svm_range_list_lock_and_flush_work to flush deferred_list work, but if deferred_list work mmput release the last user, it will call exit_mmap -> notifier_release, it is deadlock with below backtrace.
Move flush svm_range_restore_work to kfd_process_wq_release to avoid deadlock. Then svm_range_restore_work take task->mm ref to avoid mm is gone while validating and mapping ranges to GPU.
Workqueue: events svm_range_deferred_list_work [amdgpu] Call Trace: wait_for_completion+0x94/0x100 __flush_work+0x12a/0x1e0 __cancel_work_timer+0x10e/0x190 cancel_delayed_work_sync+0x13/0x20 kfd_process_notifier_release+0x98/0x2a0 [amdgpu] __mmu_notifier_release+0x74/0x1f0 exit_mmap+0x170/0x200 mmput+0x5d/0x130 svm_range_deferred_list_work+0x104/0x230 [amdgpu] process_one_work+0x220/0x3c0
--- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 1 - drivers/gpu/drm/amd/amdkfd/kfd_svm.c | 15 +++++++++------ 2 files changed, 9 insertions(+), 7 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_process.c +0 -1
@@ -1150,7 +1150,6 @@ static void kfd_process_notifier_release(struct mmu_notifier *mn,cancel_delayed_work_sync (&p->eviction_work);cancel_delayed_work_sync (&p->restore_work); -cancel_delayed_work_sync (&p->svms.restore_work);mutex_lock (&p->mutex);
drivers/gpu/drm/amd/amdkfd/kfd_svm.c +9 -6
@@ -1589,13 +1589,14 @@ static void svm_range_restore_work(struct work_struct *work)pr_debug ("restore svm ranges\n" ); -/* kfd_process_notifier_release destroys this worker thread. So during -* the lifetime of this thread, kfd_process and mm will be valid. -*/ p = container_of(svms, struct kfd_process, svms); - mm = p->mm; -if (!mm) + +/* Keep mm reference when svm_range_validate_and_map ranges */ + mm =get_task_mm (p->lead_thread); +if (!mm) { +pr_debug ("svms 0x%p process mm gone\n" , svms);return ; + }svm_range_list_lock_and_flush_work (svms, mm);mutex_lock (&svms->lock);
@@ -1649,6 +1650,7 @@ static void svm_range_restore_work(struct work_struct *work) out_reschedule:mutex_unlock (&svms->lock);mmap_write_unlock (mm); +mmput (mm);/* If validation failed, reschedule another attempt */ if (evicted_ranges) {
@@ -2779,6 +2781,8 @@ void svm_range_list_fini(struct kfd_process *p)pr_debug ("pasid 0x%x svms 0x%p\n" , p->pasid, &p->svms); +cancel_delayed_work_sync (&p->svms.restore_work); +/* Ensure list work is finished before process is destroyed */ flush_work (&p->svms.deferred_list_work);
@@ -2789,7 +2793,6 @@ void svm_range_list_fini(struct kfd_process *p)atomic_inc (&p->svms.drain_pagefaults);svm_range_drain_retry_fault (&p->svms); -list_for_each_entry_safe (prange, next, &p->svms.list, list) {svm_range_unlink (prange);svm_range_remove_notifier (prange);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 25/285 powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
In reply to Greg Kroah-HartmanFrom: Maxim Kiselev <[email protected]>
[ Upstream commit 17846485dff91acce1ad47b508b633dffc32e838 ]
T1040RDB has two RTL8211E-VB phys which requires setting of internal delays for correct work.
Changing the phy-connection-type property to rgmii-id will fix this issue.
--- arch/powerpc/boot/dts/fsl/t104xrdb.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/boot/dts/fsl/t104xrdb.dtsi +2 -2
@@ -139,12 +139,12 @@ fman@400000 { ethernet@e6000 { phy-handle = <&phy_rgmii_0>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; }; ethernet@e8000 { phy-handle = <&phy_rgmii_1>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-id"; }; mdio0: mdio@fc000 {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 26/285 ath11k: fix kernel panic during unload/load ath11k modules
In reply to Greg Kroah-HartmanFrom: Venkateswara Naralasetty <[email protected]>
[ Upstream commit 22b59cb965f79ee1accf83172441c9ca0ecb632a ]
Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix the following kernel panic when unload/load ath11k modules for few iterations.
[ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208 [ 971.204227] pgd = 594c2919 [ 971.211478] [6d97a208] *pgd=00000000 [ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0 [ 971.434256] Hardware name: Generic DT based system [ 971.440165] PC is at napi_by_id+0x10/0x40 [ 971.445019] LR is at netif_napi_add+0x160/0x1dc
[ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc) [ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb]) [ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb]) [ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94) [ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450) [ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8) [ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60) [ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140) [ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4) [ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8) [ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0) [ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac) [ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200) [ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc) [ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c) [ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1
--- drivers/net/wireless/ath/ath11k/ahb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/wireless/ath/ath11k/ahb.c +2 -0
@@ -391,6 +391,8 @@ static void ath11k_ahb_free_ext_irq(struct ath11k_base *ab)for (j =0 ; j < irq_grp->num_irq; j++)free_irq (ab->irq_num[irq_grp->irqs[j]], irq_grp); + +netif_napi_del (&irq_grp->napi); } }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 27/285 ath11k: pci: fix crash on suspend if board file is not found
In reply to Greg Kroah-HartmanFrom: Kalle Valo <[email protected]>
[ Upstream commit b4f4c56459a5c744f7f066b9fc2b54ea995030c5 ]
Mario reported that the kernel was crashing on suspend if ath11k was not able to find a board file:
[ 473.693286] PM: Suspending system (s2idle) [ 473.693291] printk: Suspending console(s) (use no_console_suspend to debug) [ 474.407787] BUG: unable to handle page fault for address: 0000000000002070 [ 474.407791] #PF: supervisor read access in kernel mode [ 474.407794] #PF: error_code(0x0000) - not-present page [ 474.407798] PGD 0 P4D 0 [ 474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G W 5.16.0 #248 [...] [ 474.407868] Call Trace: [ 474.407870] <TASK> [ 474.407874] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 474.407882] ? lock_timer_base+0x72/0xa0 [ 474.407889] ? _raw_spin_unlock_irqrestore+0x29/0x3d [ 474.407892] ? try_to_del_timer_sync+0x54/0x80 [ 474.407896] ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k] [ 474.407912] ath11k_core_suspend+0x34/0x130 [ath11k] [ 474.407923] ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci] [ 474.407928] pci_pm_suspend+0x7e/0x170 [ 474.407935] ? pci_pm_freeze+0xc0/0xc0 [ 474.407939] dpm_run_callback+0x4e/0x150 [ 474.407947] __device_suspend+0x148/0x4c0 [ 474.407951] async_suspend+0x20/0x90 dmesg-efi-164255130401001: Oops#1 Part1 [ 474.407955] async_run_entry_fn+0x33/0x120 [ 474.407959] process_one_work+0x220/0x3f0 [ 474.407966] worker_thread+0x4a/0x3d0 [ 474.407971] kthread+0x17a/0x1a0 [ 474.407975] ? process_one_work+0x3f0/0x3f0 [ 474.407979] ? set_kthread_struct+0x40/0x40 [ 474.407983] ret_from_fork+0x22/0x30 [ 474.407991] </TASK>
The issue here is that board file loading happens after ath11k_pci_probe() succesfully returns (ath11k initialisation happends asynchronously) and the suspend handler is still enabled, of course failing as ath11k is not properly initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and resume.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
--- drivers/net/wireless/ath/ath11k/pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/net/wireless/ath/ath11k/pci.c +10 -0
@@ -1419,6 +1419,11 @@ static __maybe_unused int ath11k_pci_pm_suspend(struct device *dev)struct ath11k_base *ab =dev_get_drvdata (dev);int ret; +if (test_bit (ATH11K_FLAG_QMI_FAIL , &ab->dev_flags)) { +ath11k_dbg (ab,ATH11K_DBG_BOOT ,"boot skipping pci suspend as qmi is not initialised\n" ); +return 0 ; + } + ret =ath11k_core_suspend (ab);if (ret)ath11k_warn (ab,"failed to suspend core: %d\n" , ret);
@@ -1431,6 +1436,11 @@ static __maybe_unused int ath11k_pci_pm_resume(struct device *dev)struct ath11k_base *ab =dev_get_drvdata (dev);int ret; +if (test_bit (ATH11K_FLAG_QMI_FAIL , &ab->dev_flags)) { +ath11k_dbg (ab,ATH11K_DBG_BOOT ,"boot skipping pci resume as qmi is not initialised\n" ); +return 0 ; + } + ret =ath11k_core_resume (ab);if (ret)ath11k_warn (ab,"failed to resume core: %d\n" , ret);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 28/285 ath11k: mhi: use mhi_sync_power_up()
In reply to Greg Kroah-HartmanFrom: Kalle Valo <[email protected]>
[ Upstream commit 3df6d74aedfdca919cca475d15dfdbc8b05c9e5d ]
If amss.bin was missing ath11k would crash during 'rmmod ath11k_pci'. The reason for that was that we were using mhi_async_power_up() which does not check any errors. But mhi_sync_power_up() on the other hand does check for errors so let's use that to fix the crash.
I was not able to find a reason why an async version was used. ath11k_mhi_start() (which enables state ATH11K_MHI_POWER_ON) is called from ath11k_hif_power_up(), which can sleep. So sync version should be safe to use here.
[ 145.569731] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI [ 145.569789] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 145.569843] CPU: 2 PID: 1628 Comm: rmmod Kdump: loaded Tainted: G W 5.16.0-wt-ath+ #567 [ 145.569898] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 145.569956] RIP: 0010:ath11k_hal_srng_access_begin+0xb5/0x2b0 [ath11k] [ 145.570028] Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 ec 01 00 00 48 8b ab a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 ea 48 c1 ea 03 <0f> b6 14 02 48 89 e8 83 e0 07 83 c0 03 45 85 ed 75 48 38 d0 7c 08 [ 145.570089] RSP: 0018:ffffc900025d7ac0 EFLAGS: 00010246 [ 145.570144] RAX: dffffc0000000000 RBX: ffff88814fca2dd8 RCX: 1ffffffff50cb455 [ 145.570196] RDX: 0000000000000000 RSI: ffff88814fca2dd8 RDI: ffff88814fca2e80 [ 145.570252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffffa8659497 [ 145.570329] R10: fffffbfff50cb292 R11: 0000000000000001 R12: ffff88814fca0000 [ 145.570410] R13: 0000000000000000 R14: ffff88814fca2798 R15: ffff88814fca2dd8 [ 145.570465] FS: 00007fa399988540(0000) GS:ffff888233e00000(0000) knlGS:0000000000000000 [ 145.570519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 145.570571] CR2: 00007fa399b51421 CR3: 0000000137898002 CR4: 00000000003706e0 [ 145.570623] Call Trace: [ 145.570675] <TASK> [ 145.570727] ? ath11k_ce_tx_process_cb+0x34b/0x860 [ath11k] [ 145.570797] ath11k_ce_tx_process_cb+0x356/0x860 [ath11k] [ 145.570864] ? tasklet_init+0x150/0x150 [ 145.570919] ? ath11k_ce_alloc_pipes+0x280/0x280 [ath11k] [ 145.570986] ? tasklet_clear_sched+0x42/0xe0 [ 145.571042] ? tasklet_kill+0xe9/0x1b0 [ 145.571095] ? tasklet_clear_sched+0xe0/0xe0 [ 145.571148] ? irq_has_action+0x120/0x120 [ 145.571202] ath11k_ce_cleanup_pipes+0x45a/0x580 [ath11k] [ 145.571270] ? ath11k_pci_stop+0x10e/0x170 [ath11k_pci] [ 145.571345] ath11k_core_stop+0x8a/0xc0 [ath11k] [ 145.571434] ath11k_core_deinit+0x9e/0x150 [ath11k] [ 145.571499] ath11k_pci_remove+0xd2/0x260 [ath11k_pci] [ 145.571553] pci_device_remove+0x9a/0x1c0 [ 145.571605] __device_release_driver+0x332/0x660 [ 145.571659] driver_detach+0x1e7/0x2c0 [ 145.571712] bus_remove_driver+0xe2/0x2d0 [ 145.571772] pci_unregister_driver+0x21/0x250 [ 145.571826] __do_sys_delete_module+0x30a/0x4b0 [ 145.571879] ? free_module+0xac0/0xac0 [ 145.571933] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 145.571986] ? syscall_enter_from_user_mode+0x1d/0x50 [ 145.572039] ? lockdep_hardirqs_on+0x79/0x100 [ 145.572097] do_syscall_64+0x3b/0x90 [ 145.572153] entry_SYSCALL_64_after_hwframe+0x44/0xae
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2
--- drivers/net/wireless/ath/ath11k/mhi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath11k/mhi.c +1 -1
@@ -519,7 +519,7 @@ static int ath11k_mhi_set_state(struct ath11k_pci *ab_pci, ret =0 ;break ;case ATH11K_MHI_POWER_ON : - ret =mhi_async_power_up (ab_pci->mhi_ctrl); + ret =mhi_sync_power_up (ab_pci->mhi_ctrl);break ;case ATH11K_MHI_POWER_OFF :mhi_power_down (ab_pci->mhi_ctrl, true);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 29/285 net/smc: Send directly when TCP_CORK is cleared
In reply to Greg Kroah-HartmanFrom: Tony Lu <[email protected]>
[ Upstream commit ea785a1a573b390a150010b3c5b81e1ccd8c98a8 ]
According to the man page of TCP_CORK [1], if set, don't send out partial frames. All queued partial frames are sent when option is cleared again.
When applications call setsockopt to disable TCP_CORK, this call is protected by lock_sock(), and tries to mod_delayed_work() to 0, in order to send pending data right now. However, the delayed work smc_tx_work is also protected by lock_sock(). There introduces lock contention for sending data.
To fix it, send pending data directly which acts like TCP, without lock_sock() protected in the context of setsockopt (already lock_sock()ed), and cancel unnecessary dealyed work, which is protected by lock.
[1] https://linux.die.net/man/7/tcp
--- net/smc/af_smc.c | 4 ++-- net/smc/smc_tx.c | 25 +++++++++++++++---------- net/smc/smc_tx.h | 1 + 3 files changed, 18 insertions(+), 12 deletions(-)
net/smc/af_smc.c +2 -2
@@ -2632,8 +2632,8 @@ static int smc_setsockopt(struct socket *sock, int level, int optname, sk->sk_state != SMC_CLOSED) {if (!val) {SMC_STAT_INC (smc, cork_cnt); -mod_delayed_work (smc->conn.lgr->tx_wq, - &smc->conn.tx_work,0 ); +smc_tx_pending (&smc->conn); +cancel_delayed_work (&smc->conn.tx_work); } }break ;
net/smc/smc_tx.c +15 -10
@@ -597,27 +597,32 @@ int smc_tx_sndbuf_nonempty(struct smc_connection *conn)return rc; } -/* Wakeup sndbuf consumers from process context -* since there is more data to transmit -*/ -void smc_tx_work (struct work_struct *work) +void smc_tx_pending (struct smc_connection *conn) { -struct smc_connection *conn =container_of (to_delayed_work (work), - struct smc_connection, - tx_work); struct smc_sock *smc = container_of(conn, struct smc_sock, conn);int rc; -lock_sock (&smc->sk);if (smc->sk.sk_err) - goto out; +return ; rc =smc_tx_sndbuf_nonempty (conn);if (!rc && conn->local_rx_ctrl.prod_flags.write_blocked && !atomic_read (&conn->bytes_to_rcv)) conn->local_rx_ctrl.prod_flags.write_blocked =0 ; +} + +/* Wakeup sndbuf consumers from process context +* since there is more data to transmit +*/ +void smc_tx_work (struct work_struct *work) +{ +struct smc_connection *conn =container_of (to_delayed_work (work), + struct smc_connection, + tx_work); + struct smc_sock *smc = container_of(conn, struct smc_sock, conn); -out: +lock_sock (&smc->sk); +smc_tx_pending (conn);release_sock (&smc->sk); }
net/smc/smc_tx.h +1 -0
@@ -27,6 +27,7 @@ static inline int smc_tx_prepared_sends(struct smc_connection *conn)return smc_curs_diff (conn->sndbuf_desc->len, &sent, &prep); } +void smc_tx_pending (struct smc_connection *conn);void smc_tx_work (struct work_struct *work);void smc_tx_init (struct smc_sock *smc);int smc_tx_sendmsg (struct smc_sock *smc,struct msghdr *msg,size_t len);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 30/285 drm/bridge: Add missing pm_runtime_put_sync
In reply to Greg Kroah-HartmanFrom: Yongzhi Liu <[email protected]>
[ Upstream commit 46f47807738441e354873546dde0b000106c068a ]
pm_runtime_get_sync() will increase the rumtime PM counter even when it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Besides, a matching decrement is needed on the error handling path to keep the counter balanced.
--- drivers/gpu/drm/bridge/nwl-dsi.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/gpu/drm/bridge/nwl-dsi.c +12 -6
@@ -861,18 +861,19 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,memcpy (&dsi->mode, adjusted_mode,sizeof (dsi->mode));drm_mode_debug_printmodeline (adjusted_mode); -pm_runtime_get_sync (dev); +if (pm_runtime_resume_and_get (dev) <0 ) +return ;if (clk_prepare_enable (dsi->lcdif_clk) <0 ) -return ; + goto runtime_put;if (clk_prepare_enable (dsi->core_clk) <0 ) -return ; + goto runtime_put;/* Step 1 from DSI reset-out instructions */ ret =reset_control_deassert (dsi->rst_pclk);if (ret <0 ) {DRM_DEV_ERROR (dev,"Failed to deassert PCLK: %d\n" , ret); -return ; + goto runtime_put; }/* Step 2 from DSI reset-out instructions */
@@ -882,13 +883,18 @@ nwl_dsi_bridge_mode_set(struct drm_bridge *bridge, ret =reset_control_deassert (dsi->rst_esc);if (ret <0 ) {DRM_DEV_ERROR (dev,"Failed to deassert ESC: %d\n" , ret); -return ; + goto runtime_put; } ret =reset_control_deassert (dsi->rst_byte);if (ret <0 ) {DRM_DEV_ERROR (dev,"Failed to deassert BYTE: %d\n" , ret); -return ; + goto runtime_put; } + +return ; + +runtime_put: +pm_runtime_put_sync (dev); } static void
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 31/285 bpf: Make dst_port field in struct bpf_sock 16-bit wide
In reply to Greg Kroah-HartmanFrom: Jakub Sitnicki <[email protected]>
[ Upstream commit 4421a582718ab81608d8486734c18083b822390d ]
Menglong Dong reports that the documentation for the dst_port field in struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the field is a zero-padded 16-bit integer in network byte order. The value appears to the BPF user as if laid out in memory as so:
offsetof(struct bpf_sock, dst_port) + 0 <port MSB>
+ 8 <port LSB>
+16 0x00
+24 0x0032-, 16-, and 8-bit wide loads from the field are all allowed, but only if the offset into the field is 0.
32-bit wide loads from dst_port are especially confusing. The loaded value, after converting to host byte order with bpf_ntohl(dst_port), contains the port number in the upper 16-bits.
Remove the confusion by splitting the field into two 16-bit fields. For backward compatibility, allow 32-bit wide loads from offsetof(struct bpf_sock, dst_port).
While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.
--- include/uapi/linux/bpf.h | 3 ++- net/core/filter.c | 10 +++++++++- 2 files changed, 11 insertions(+), 2 deletions(-)
include/uapi/linux/bpf.h +2 -1
@@ -5414,7 +5414,8 @@ struct bpf_sock {__u32 src_ip4;__u32 src_ip6[4 ];__u32 src_port;/* host byte order */ -__u32 dst_port;/* network byte order */ +__be16 dst_port;/* network byte order */ + __u16 :16 ;/* zero padding */ __u32 dst_ip4;__u32 dst_ip6[4 ];__u32 state;
net/core/filter.c +9 -1
@@ -7975,6 +7975,7 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type, struct bpf_insn_access_aux *info) {const int size_default =sizeof (__u32); +int field_size;if (off <0 || off >=sizeof (struct bpf_sock ))return false;
@@ -7986,7 +7987,6 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type,case offsetof(struct bpf_sock , family):case offsetof(struct bpf_sock , type):case offsetof(struct bpf_sock , protocol): -case offsetof(struct bpf_sock , dst_port):case offsetof(struct bpf_sock , src_port):case offsetof(struct bpf_sock , rx_queue_mapping): case bpf_ctx_range(struct bpf_sock, src_ip4):
@@ -7995,6 +7995,14 @@ bool bpf_sock_is_valid_access(int off, int size, enum bpf_access_type type, case bpf_ctx_range_till(struct bpf_sock, dst_ip6[0], dst_ip6[3]):bpf_ctx_record_field_size (info, size_default);return bpf_ctx_narrow_access_ok (off, size, size_default); + case bpf_ctx_range(struct bpf_sock, dst_port): + field_size = size == size_default ? + size_default : sizeof_field(struct bpf_sock, dst_port); +bpf_ctx_record_field_size (info, field_size); +return bpf_ctx_narrow_access_ok (off, size, field_size); + case offsetofend(struct bpf_sock, dst_port) ... + offsetof(struct bpf_sock, dst_ip4) - 1: +return false; }return size == size_default;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 32/285 scsi: mvsas: Replace snprintf() with sysfs_emit()
In reply to Greg Kroah-HartmanFrom: Yang Guang <[email protected]>
[ Upstream commit 0ad3867b0f13e45cfee5a1298bfd40eef096116c ]
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
--- drivers/scsi/mvsas/mv_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/mvsas/mv_init.c +2 -2
@@ -696,7 +696,7 @@ static struct pci_driver mvs_pci_driver = {static ssize_t driver_version_show (struct device *cdev,struct device_attribute *attr,char *buffer) { -return snprintf (buffer,PAGE_SIZE ,"%s\n" ,DRV_VERSION ); +return sysfs_emit (buffer,"%s\n" ,DRV_VERSION ); }static DEVICE_ATTR_RO (driver_version);
@@ -744,7 +744,7 @@ static ssize_t interrupt_coalescing_store(struct device *cdev,static ssize_t interrupt_coalescing_show (struct device *cdev,struct device_attribute *attr,char *buffer) { -return snprintf (buffer,PAGE_SIZE ,"%d\n" , interrupt_coalescing); +return sysfs_emit (buffer,"%d\n" , interrupt_coalescing); }static DEVICE_ATTR_RW (interrupt_coalescing);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 33/285 scsi: bfa: Replace snprintf() with sysfs_emit()
In reply to Greg Kroah-HartmanFrom: Yang Guang <[email protected]>
[ Upstream commit 2245ea91fd3a04cafbe2f54911432a8657528c3b ]
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
--- drivers/scsi/bfa/bfad_attr.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/scsi/bfa/bfad_attr.c +13 -13
@@ -711,7 +711,7 @@ bfad_im_serial_num_show(struct device *dev, struct device_attribute *attr,char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN ];bfa_get_adapter_serial_num (&bfad->bfa, serial_num); -return snprintf (buf,PAGE_SIZE ,"%s\n" , serial_num); +return sysfs_emit (buf,"%s\n" , serial_num); } static ssize_t
@@ -725,7 +725,7 @@ bfad_im_model_show(struct device *dev, struct device_attribute *attr,char model[BFA_ADAPTER_MODEL_NAME_LEN ];bfa_get_adapter_model (&bfad->bfa, model); -return snprintf (buf,PAGE_SIZE ,"%s\n" , model); +return sysfs_emit (buf,"%s\n" , model); } static ssize_t
@@ -805,7 +805,7 @@ bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr,snprintf (model_descr,BFA_ADAPTER_MODEL_DESCR_LEN ,"Invalid Model" ); -return snprintf (buf,PAGE_SIZE ,"%s\n" , model_descr); +return sysfs_emit (buf,"%s\n" , model_descr); } static ssize_t
@@ -819,7 +819,7 @@ bfad_im_node_name_show(struct device *dev, struct device_attribute *attr,u64 nwwn; nwwn =bfa_fcs_lport_get_nwwn (port->fcs_port); -return snprintf (buf,PAGE_SIZE ,"0x%llx\n" ,cpu_to_be64 (nwwn)); +return sysfs_emit (buf,"0x%llx\n" ,cpu_to_be64 (nwwn)); } static ssize_t
@@ -836,7 +836,7 @@ bfad_im_symbolic_name_show(struct device *dev, struct device_attribute *attr,bfa_fcs_lport_get_attr (&bfad->bfa_fcs.fabric.bport, &port_attr);strlcpy (symname, port_attr.port_cfg.sym_name.symname,BFA_SYMNAME_MAXLEN ); -return snprintf (buf,PAGE_SIZE ,"%s\n" , symname); +return sysfs_emit (buf,"%s\n" , symname); } static ssize_t
@@ -850,14 +850,14 @@ bfad_im_hw_version_show(struct device *dev, struct device_attribute *attr,char hw_ver[BFA_VERSION_LEN ];bfa_get_pci_chip_rev (&bfad->bfa, hw_ver); -return snprintf (buf,PAGE_SIZE ,"%s\n" , hw_ver); +return sysfs_emit (buf,"%s\n" , hw_ver); }static ssize_t bfad_im_drv_version_show (struct device *dev,struct device_attribute *attr,char *buf) { -return snprintf (buf,PAGE_SIZE ,"%s\n" ,BFAD_DRIVER_VERSION ); +return sysfs_emit (buf,"%s\n" ,BFAD_DRIVER_VERSION ); } static ssize_t
@@ -871,7 +871,7 @@ bfad_im_optionrom_version_show(struct device *dev,char optrom_ver[BFA_VERSION_LEN ];bfa_get_adapter_optrom_ver (&bfad->bfa, optrom_ver); -return snprintf (buf,PAGE_SIZE ,"%s\n" , optrom_ver); +return sysfs_emit (buf,"%s\n" , optrom_ver); } static ssize_t
@@ -885,7 +885,7 @@ bfad_im_fw_version_show(struct device *dev, struct device_attribute *attr,char fw_ver[BFA_VERSION_LEN ];bfa_get_adapter_fw_ver (&bfad->bfa, fw_ver); -return snprintf (buf,PAGE_SIZE ,"%s\n" , fw_ver); +return sysfs_emit (buf,"%s\n" , fw_ver); } static ssize_t
@@ -897,7 +897,7 @@ bfad_im_num_of_ports_show(struct device *dev, struct device_attribute *attr, (struct bfad_im_port_s *) shost->hostdata[0 ];struct bfad_s *bfad = im_port->bfad; -return snprintf (buf,PAGE_SIZE ,"%d\n" , +return sysfs_emit (buf,"%d\n" ,bfa_get_nports (&bfad->bfa)); }
@@ -905,7 +905,7 @@ static ssize_t bfad_im_drv_name_show(struct device *dev, struct device_attribute *attr, char *buf) { - return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_NAME); + return sysfs_emit(buf, "%s\n", BFAD_DRIVER_NAME); } static ssize_t
@@ -924,14 +924,14 @@ bfad_im_num_of_discovered_ports_show(struct device *dev, rports =kcalloc (nrports,sizeof (struct bfa_rport_qualifier_s ),GFP_ATOMIC );if (rports ==NULL ) -return snprintf (buf,PAGE_SIZE ,"Failed\n" ); +return sysfs_emit (buf,"Failed\n" );spin_lock_irqsave (&bfad->bfad_lock, flags);bfa_fcs_lport_get_rport_quals (port->fcs_port, rports, &nrports);spin_unlock_irqrestore (&bfad->bfad_lock, flags);kfree (rports); -return snprintf (buf,PAGE_SIZE ,"%d\n" , nrports); +return sysfs_emit (buf,"%d\n" , nrports); } static DEVICE_ATTR(serial_number, S_IRUGO,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 34/285 drm/v3d: fix missing unlock
In reply to Greg Kroah-HartmanFrom: Yongzhi Liu <[email protected]>
[ Upstream commit e57c1a3bd5e8e0c7181f65ae55581f0236a8f284 ]
[why]
Unlock is needed on the error handling path to prevent dead lock. v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock.
[how]
Fix this by changing goto target on the error handling path. So changing the goto to target an error handling path that includes drm_gem_unlock reservations.
--- drivers/gpu/drm/v3d/v3d_gem.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/v3d/v3d_gem.c +4 -2
@@ -798,7 +798,7 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,if (!render->base.perfmon) { ret = -ENOENT ; - goto fail; + goto fail_perfmon; } }
@@ -847,6 +847,7 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data, fail_unreserve:mutex_unlock (&v3d->sched_lock); +fail_perfmon:drm_gem_unlock_reservations (last_job->bo, last_job->bo_count, &acquire_ctx); fail:
@@ -1027,7 +1028,7 @@ v3d_submit_csd_ioctl(struct drm_device *dev, void *data, args->perfmon_id);if (!job->base.perfmon) { ret = -ENOENT ; - goto fail; + goto fail_perfmon; } }
@@ -1056,6 +1057,7 @@ v3d_submit_csd_ioctl(struct drm_device *dev, void *data, fail_unreserve:mutex_unlock (&v3d->sched_lock); +fail_perfmon:drm_gem_unlock_reservations (clean_job->bo, clean_job->bo_count, &acquire_ctx); fail:
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 35/285 power: supply: axp20x_battery: properly report current when discharging
In reply to Greg Kroah-HartmanFrom: Evgeny Boger <[email protected]>
[ Upstream commit d4f408cdcd26921c1268cb8dcbe8ffb6faf837f3 ]
As stated in [1], negative current values are used for discharging batteries.
AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging. The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from, it doesn't apply negative sign when reporting discharging current.
[1] Documentation/ABI/testing/sysfs-class-power
--- drivers/power/supply/axp20x_battery.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/power/supply/axp20x_battery.c +6 -7
@@ -186,7 +186,6 @@ static int axp20x_battery_get_prop(struct power_supply *psy, union power_supply_propval *val) {struct axp20x_batt_ps *axp20x_batt =power_supply_get_drvdata (psy); -struct iio_channel *chan;int ret =0 , reg, val1;switch (psp) {
@@ -266,12 +265,12 @@ static int axp20x_battery_get_prop(struct power_supply *psy,if (ret)return ret; -if (reg &AXP20X_PWR_STATUS_BAT_CHARGING ) - chan = axp20x_batt->batt_chrg_i; -else - chan = axp20x_batt->batt_dischrg_i; - - ret =iio_read_channel_processed (chan, &val->intval); +if (reg &AXP20X_PWR_STATUS_BAT_CHARGING ) { + ret =iio_read_channel_processed (axp20x_batt->batt_chrg_i, &val->intval); + }else { + ret =iio_read_channel_processed (axp20x_batt->batt_dischrg_i, &val1); + val->intval = -val1; + }if (ret)return ret;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 36/285 mt76: mt7921: fix crash when startup fails.
In reply to Greg Kroah-HartmanFrom: Ben Greear <[email protected]>
[ Upstream commit 827e7799c61b978fbc2cc9dac66cb62401b2b3f0 ]
If the nic fails to start, it is possible that the reset_work has already been scheduled. Ensure the work item is canceled so we do not have use-after-free crash in case cleanup is called before the work item is executed.
This fixes crash on my x86_64 apu2 when mt7921k radio fails to work. Radio still fails, but OS does not crash.
--- drivers/net/wireless/mediatek/mt76/mt7921/main.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/mediatek/mt76/mt7921/main.c +1 -0
@@ -260,6 +260,7 @@ static void mt7921_stop(struct ieee80211_hw *hw)cancel_delayed_work_sync (&dev->pm.ps_work);cancel_work_sync (&dev->pm.wake_work); +cancel_work_sync (&dev->reset_work);mt76_connac_free_pending_tx_skbs (&dev->pm,NULL );mt7921_mutex_acquire (dev);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 37/285 mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
In reply to Greg Kroah-HartmanFrom: Lorenzo Bianconi <[email protected]>
[ Upstream commit 577298ec55dfc8b9aece54520f0258c3f93a6573 ]
Even if it is only a false-positive since skip_buf0/skip_buf1 are only used in mt76_dma_tx_cleanup_idx routine, initialize skip_unmap in mt76_dma_rx_fill in order to fix the following UBSAN report:
[ 13.924906] UBSAN: invalid-load in linux-5.15.0/drivers/net/wireless/mediatek/mt76/dma.c:162:13 [ 13.924909] load of value 225 is not a valid value for type '_Bool' [ 13.924912] CPU: 9 PID: 672 Comm: systemd-udevd Not tainted 5.15.0-18-generic #18-Ubuntu [ 13.924914] Hardware name: LENOVO 21A0000CMX/21A0000CMX, BIOS R1MET43W (1.13 ) 11/05/2021 [ 13.924915] Call Trace: [ 13.924917] <TASK> [ 13.924920] show_stack+0x52/0x58 [ 13.924925] dump_stack_lvl+0x4a/0x5f [ 13.924931] dump_stack+0x10/0x12 [ 13.924932] ubsan_epilogue+0x9/0x45 [ 13.924934] __ubsan_handle_load_invalid_value.cold+0x44/0x49 [ 13.924935] ? __iommu_dma_map+0x84/0xf0 [ 13.924939] mt76_dma_add_buf.constprop.0.cold+0x23/0x85 [mt76] [ 13.924949] mt76_dma_rx_fill.isra.0+0x102/0x1f0 [mt76] [ 13.924954] mt76_dma_init+0xc9/0x150 [mt76] [ 13.924959] ? mt7921_dma_enable+0x110/0x110 [mt7921e] [ 13.924966] mt7921_dma_init+0x1e3/0x260 [mt7921e] [ 13.924970] mt7921_register_device+0x29d/0x510 [mt7921e] [ 13.924975] mt7921_pci_probe.part.0+0x17f/0x1b0 [mt7921e] [ 13.924980] mt7921_pci_probe+0x43/0x60 [mt7921e] [ 13.924984] local_pci_probe+0x4b/0x90 [ 13.924987] pci_device_probe+0x115/0x1f0 [ 13.924989] really_probe+0x21e/0x420 [ 13.924992] __driver_probe_device+0x115/0x190 [ 13.924994] driver_probe_device+0x23/0xc0 [ 13.924996] __driver_attach+0xbd/0x1d0 [ 13.924998] ? __device_attach_driver+0x110/0x110 [ 13.924999] bus_for_each_dev+0x7e/0xc0 [ 13.925001] driver_attach+0x1e/0x20 [ 13.925003] bus_add_driver+0x135/0x200 [ 13.925005] driver_register+0x95/0xf0 [ 13.925008] ? 0xffffffffc0766000 [ 13.925010] __pci_register_driver+0x68/0x70 [ 13.925011] mt7921_pci_driver_init+0x23/0x1000 [mt7921e] [ 13.925015] do_one_initcall+0x48/0x1d0 [ 13.925019] ? kmem_cache_alloc_trace+0x19e/0x2e0 [ 13.925022] do_init_module+0x62/0x280 [ 13.925025] load_module+0xac9/0xbb0 [ 13.925027] __do_sys_finit_module+0xbf/0x120 [ 13.925029] __x64_sys_finit_module+0x18/0x20 [ 13.925030] do_syscall_64+0x5c/0xc0 [ 13.925033] ? do_syscall_64+0x69/0xc0 [ 13.925034] ? sysvec_reschedule_ipi+0x78/0xe0 [ 13.925036] ? asm_sysvec_reschedule_ipi+0xa/0x20 [ 13.925039] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 13.925040] RIP: 0033:0x7fbf2b90f94d [ 13.925045] RSP: 002b:00007ffe2ec7e5d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 13.925047] RAX: ffffffffffffffda RBX: 000056106b0634e0 RCX: 00007fbf2b90f94d [ 13.925048] RDX: 0000000000000000 RSI: 00007fbf2baa3441 RDI: 0000000000000013 [ 13.925049] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 13.925050] R10: 0000000000000013 R11: 0000000000000246 R12: 00007fbf2baa3441 [ 13.925051] R13: 000056106b062620 R14: 000056106b0610c0 R15: 000056106b0640d0 [ 13.925053] </TASK>
--- drivers/net/wireless/mediatek/mt76/dma.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/mediatek/mt76/dma.c +1 -0
@@ -465,6 +465,7 @@ mt76_dma_rx_fill(struct mt76_dev *dev, struct mt76_queue *q) qbuf.addr = addr + offset; qbuf.len = len - offset; + qbuf.skip_unmap = false;mt76_dma_add_buf (dev, q, &qbuf,1 ,0 , buf,NULL ); frames++; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 38/285 cfg80211: dont add non transmitted BSS to 6GHz scanned channels
In reply to Greg Kroah-HartmanFrom: Avraham Stern <[email protected]>
[ Upstream commit 5666ee154f4696c011dfa8544aaf5591b6b87515 ]
When adding 6GHz channels to scan request based on reported co-located APs, don't add channels that have only APs with "non-transmitted" BSSes if they only match the wildcard SSID since they will be found by probing the "transmitted" BSS.
--- net/wireless/scan.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
net/wireless/scan.c +8 -1
@@ -702,8 +702,12 @@ static bool cfg80211_find_ssid_match(struct cfg80211_colocated_ap *ap,for (i =0 ; i < request->n_ssids; i++) {/* wildcard ssid in the scan request */ -if (!request->ssids[i].ssid_len) +if (!request->ssids[i].ssid_len) { +if (ap->multi_bss && !ap->transmitted_bssid) +continue ; +return true; + }if (ap->ssid_len && ap->ssid_len == request->ssids[i].ssid_len) {
@@ -829,6 +833,9 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev) !cfg80211_find_ssid_match(ap, request))continue ; +if (!request->n_ssids && ap->multi_bss && !ap->transmitted_bssid) +continue ; +cfg80211_scan_req_add_chan (request, chan, true);memcpy (scan_6ghz_params->bssid, ap->bssid,ETH_ALEN ); scan_6ghz_params->short_ssid = ap->short_ssid;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 39/285 libbpf: Fix build issue with llvm-readelf
In reply to Greg Kroah-HartmanFrom: Yonghong Song <[email protected]>
[ Upstream commit 0908a66ad1124c1634c33847ac662106f7f2c198 ]
There are cases where clang compiler is packaged in a way readelf is a symbolic link to llvm-readelf. In such cases, llvm-readelf will be used instead of default binutils readelf, and the following error will appear during libbpf build:
# Warning: Num of global symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367) # does NOT match with num of versioned symbols in # /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383). # Please make sure all LIBBPF_API symbols are versioned in libbpf.map. # --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ... # +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ... # @@ -324,6 +324,22 @@ # btf__str_by_offset # btf__type_by_id # btf__type_cnt # +LIBBPF_0.0.1 # +LIBBPF_0.0.2 # +LIBBPF_0.0.3 # +LIBBPF_0.0.4 # +LIBBPF_0.0.5 # +LIBBPF_0.0.6 # +LIBBPF_0.0.7 # +LIBBPF_0.0.8 # +LIBBPF_0.0.9 # +LIBBPF_0.1.0 # +LIBBPF_0.2.0 # +LIBBPF_0.3.0 # +LIBBPF_0.4.0 # +LIBBPF_0.5.0 # +LIBBPF_0.6.0 # +LIBBPF_0.7.0 # libbpf_attach_type_by_name # libbpf_find_kernel_btf # libbpf_find_vmlinux_btf_id
# make[2]: *** [Makefile:184: check_abi] Error 1
# make[1]: *** [Makefile:140: all] Error 2
The above failure is due to different printouts for some ABS versioned symbols. For example, with the same libbpf.so,
$ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0
...
$ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.The proposed fix filters out all ABS symbols as they are not part of the comparison. This works for both binutils readelf and llvm-readelf.
--- tools/lib/bpf/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
tools/lib/bpf/Makefile +2 -2
@@ -129,7 +129,7 @@ GLOBAL_SYM_COUNT = $(shell readelf -s -- sort -u | wc -l) VERSIONED_SYM_COUNT = $(shell readelf --dyn-syms --wide $(OUTPUT)libbpf.so | \ sed 's/\[.*\]//' | \ - awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}' | \ + awk '/GLOBAL/ && /DEFAULT/ && !/UND|ABS/ {print $$NF}' | \ grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | sort -u | wc -l) CMD_TARGETS = $(LIB_TARGET) $(PC_FILE)
@@ -192,7 +192,7 @@ check_abi: $(OUTPUT)libbpf.so $(VERSION_ sort -u > $(OUTPUT)libbpf_global_syms.tmp; \ readelf --dyn-syms --wide $(OUTPUT)libbpf.so | \ sed 's/\[.*\]//' | \ - awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$NF}'| \ + awk '/GLOBAL/ && /DEFAULT/ && !/UND|ABS/ {print $$NF}'| \ grep -Eo '[^ ]+@LIBBPF_' | cut -d@ -f1 | \ sort -u > $(OUTPUT)libbpf_versioned_syms.tmp; \ diff -u $(OUTPUT)libbpf_global_syms.tmp \
Greg Kroah-Hartman
maintainerPATCH 40/285 ipv6: make mc_forwarding atomic
In reply to Greg Kroah-HartmanFrom: Eric Dumazet <[email protected]>
[ Upstream commit 145c7a793838add5e004e7d49a67654dc7eba147 ]
This fixes minor data-races in ip6_mc_input() andbatadv_mcast_mla_rtr_flags_softif_get_ipv6()
--- include/linux/ipv6.h | 2 +- net/batman-adv/multicast.c | 2 +- net/ipv6/addrconf.c | 4 ++-- net/ipv6/ip6_input.c | 2 +- net/ipv6/ip6mr.c | 8 ++++---- 5 files changed, 9 insertions(+), 9 deletions(-)
include/linux/ipv6.h +1 -1
@@ -51,7 +51,7 @@ struct ipv6_devconf {__s32 use_optimistic;#endif #ifdef CONFIG_IPV6_MROUTE -__s32 mc_forwarding; +atomic_t mc_forwarding;#endif __s32 disable_ipv6;__s32 drop_unicast_in_l2_multicast;
net/batman-adv/multicast.c +1 -1
@@ -134,7 +134,7 @@ static u8 batadv_mcast_mla_rtr_flags_softif_get_ipv6(struct net_device *dev) {struct inet6_dev *in6_dev =__in6_dev_get (dev); -if (in6_dev && in6_dev->cnf.mc_forwarding) +if (in6_dev &&atomic_read (&in6_dev->cnf.mc_forwarding))return BATADV_NO_FLAGS ;else return BATADV_MCAST_WANT_NO_RTR6 ;
net/ipv6/addrconf.c +2 -2
@@ -554,7 +554,7 @@ static int inet6_netconf_fill_devconf(struct sk_buff *skb, int ifindex,#ifdef CONFIG_IPV6_MROUTE if ((all || type ==NETCONFA_MC_FORWARDING ) &&nla_put_s32 (skb,NETCONFA_MC_FORWARDING , - devconf->mc_forwarding) <0 ) +atomic_read (&devconf->mc_forwarding)) <0 ) goto nla_put_failure;#endif if ((all || type == NETCONFA_PROXY_NEIGH) &&
@@ -5539,7 +5539,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf, array[DEVCONF_USE_OPTIMISTIC ] = cnf->use_optimistic;#endif #ifdef CONFIG_IPV6_MROUTE - array[DEVCONF_MC_FORWARDING ] = cnf->mc_forwarding; + array[DEVCONF_MC_FORWARDING ] =atomic_read (&cnf->mc_forwarding);#endif array[DEVCONF_DISABLE_IPV6 ] = cnf->disable_ipv6; array[DEVCONF_ACCEPT_DAD ] = cnf->accept_dad;
net/ipv6/ip6_input.c +1 -1
@@ -508,7 +508,7 @@ int ip6_mc_input(struct sk_buff *skb)/* * IPv6 multicast router mode is now supported ;) */ -if (dev_net (skb->dev)->ipv6.devconf_all->mc_forwarding && +if (atomic_read (&dev_net (skb->dev)->ipv6.devconf_all->mc_forwarding) && !(ipv6_addr_type (&hdr->daddr) & (IPV6_ADDR_LOOPBACK |IPV6_ADDR_LINKLOCAL )) &&likely (!(IP6CB (skb)->flags &IP6SKB_FORWARDED ))) {
net/ipv6/ip6mr.c +4 -4
@@ -739,7 +739,7 @@ static int mif6_delete(struct mr_table *mrt, int vifi, int notify, in6_dev =__in6_dev_get (dev);if (in6_dev) { - in6_dev->cnf.mc_forwarding--; +atomic_dec (&in6_dev->cnf.mc_forwarding);inet6_netconf_notify_devconf (dev_net (dev),RTM_NEWNETCONF ,NETCONFA_MC_FORWARDING , dev->ifindex, &in6_dev->cnf);
@@ -907,7 +907,7 @@ static int mif6_add(struct net *net, struct mr_table *mrt, in6_dev =__in6_dev_get (dev);if (in6_dev) { - in6_dev->cnf.mc_forwarding++; +atomic_inc (&in6_dev->cnf.mc_forwarding);inet6_netconf_notify_devconf (dev_net (dev),RTM_NEWNETCONF ,NETCONFA_MC_FORWARDING , dev->ifindex, &in6_dev->cnf);
@@ -1557,7 +1557,7 @@ static int ip6mr_sk_init(struct mr_table *mrt, struct sock *sk) }else {rcu_assign_pointer (mrt->mroute_sk, sk);sock_set_flag (sk,SOCK_RCU_FREE ); - net->ipv6.devconf_all->mc_forwarding++; +atomic_inc (&net->ipv6.devconf_all->mc_forwarding); }write_unlock_bh (&mrt_lock);
@@ -1590,7 +1590,7 @@ int ip6mr_sk_done(struct sock *sk)* so the RCU grace period before sk freeing * is guaranteed by sk_destruct() */ - net->ipv6.devconf_all->mc_forwarding--; +atomic_dec (&net->ipv6.devconf_all->mc_forwarding);write_unlock_bh (&mrt_lock); inet6_netconf_notify_devconf(net, RTM_NEWNETCONF, NETCONFA_MC_FORWARDING,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 41/285 net: initialize init_net earlier
In reply to Greg Kroah-HartmanFrom: Eric Dumazet <[email protected]>
[ Upstream commit 9c1be1935fb68b2413796cdc03d019b8cf35ab51 ]
While testing a patch that will follow later ("net: add netns refcount tracker to struct nsproxy") I found that devtmpfs_init() was called before init_net was initialized.
This is a bug, because devtmpfs_setup() callsksys_unshare(CLONE_NEWNS);
This has the effect of increasing init_net refcount,
which will be later overwritten to 1, as part of setup_net(&init_net)
We had too many prior patches [1] trying to work around the root cause.
Really, make sure init_net is in BSS section, and that net_ns_init() is called earlier at boot time.
Note that another patch ("vfs: add netns refcount tracker to struct fs_context") also will need net_ns_init() being called before vfs_caches_init()
As a bonus, this patch saves around 4KB in .data section.
[1]
f8c46cb39079 ("netns: do not call pernet ops for not yet set up init_net namespace") b5082df8019a ("net: Initialise init_net.count to 1")734b65417b24 ("net: Statically initialize init_net.dev_base_head")
v2: fixed a build error reported by kernel build bots (CONFIG_NET=n)
--- include/net/net_namespace.h | 6 ++++++ init/main.c | 2 ++ net/core/dev.c | 3 +-- net/core/net_namespace.c | 17 +++++------------ 4 files changed, 14 insertions(+), 14 deletions(-)
include/net/net_namespace.h +6 -0
@@ -479,4 +479,10 @@ static inline void fnhe_genid_bump(struct net *net) atomic_inc(&net->fnhe_genid); } +#ifdef CONFIG_NET +void net_ns_init (void ); +#else +static inline void net_ns_init (void ) {} +#endif +#endif /* __NET_NET_NAMESPACE_H */
init/main.c +2 -0
@@ -99,6 +99,7 @@#include <linux/kcsan.h> #include <linux/init_syscalls.h> #include <linux/stackdepot.h> +#include <net/net_namespace.h> #include <asm/io.h> #include <asm/bugs.h>
@@ -1113,6 +1114,7 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)key_init ();security_init ();dbg_late_init (); +net_ns_init ();vfs_caches_init ();pagecache_init ();signals_init ();
net/core/dev.c +1 -2
@@ -11403,8 +11403,7 @@ static int __net_init netdev_init(struct net *net)BUILD_BUG_ON (GRO_HASH_BUCKETS > 8 * sizeof_field(struct napi_struct, gro_bitmask)); -if (net != &init_net) -INIT_LIST_HEAD (&net->dev_base_head); +INIT_LIST_HEAD (&net->dev_base_head); net->dev_name_head =netdev_create_hash ();if (net->dev_name_head ==NULL )
net/core/net_namespace.c +5 -12
@@ -44,13 +44,7 @@ EXPORT_SYMBOL_GPL(net_rwsem);static struct key_tag init_net_key_domain = { .usage =REFCOUNT_INIT (1 ) };#endif -struct net init_net = { - .ns.count =REFCOUNT_INIT (1 ), - .dev_base_head =LIST_HEAD_INIT (init_net.dev_base_head), -#ifdef CONFIG_KEYS - .key_domain = &init_net_key_domain, -#endif -}; +struct net init_net;EXPORT_SYMBOL (init_net);static bool init_net_initialized;
@@ -1081,7 +1075,7 @@ static void rtnl_net_notifyid(struct net *net, int cmd, int id, u32 portid,rtnl_set_sk_err (net,RTNLGRP_NSID , err); } -static int __init net_ns_init (void ) +void __init net_ns_init (void ) {struct net_generic *ng;
@@ -1102,6 +1096,9 @@ static int __init net_ns_init(void)rcu_assign_pointer (init_net.gen, ng); +#ifdef CONFIG_KEYS + init_net.key_domain = &init_net_key_domain; +#endif down_write (&pernet_ops_rwsem);if (setup_net (&init_net, &init_user_ns))panic ("Could not setup the initial network namespace" );
@@ -1116,12 +1113,8 @@ static int __init net_ns_init(void) RTNL_FLAG_DOIT_UNLOCKED);rtnl_register (PF_UNSPEC ,RTM_GETNSID , rtnl_net_getid, rtnl_net_dumpid,RTNL_FLAG_DOIT_UNLOCKED ); - -return 0 ; } -pure_initcall (net_ns_init); -static void free_exit_list (struct pernet_operations *ops,struct list_head *net_exit_list) {ops_pre_exit_list (ops, net_exit_list);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 42/285 powerpc: Set crashkernel offset to mid of RMA region
In reply to Greg Kroah-HartmanFrom: Sourabh Jain <[email protected]>
[ Upstream commit 7c5ed82b800d8615cdda00729e7b62e5899f0b13 ]
On large config LPARs (having 192 and more cores), Linux fails to boot due to insufficient memory in the first memblock. It is due to the memory reservation for the crash kernel which starts at 128MB offset of the first memblock. This memory reservation for the crash kernel doesn't leave enough space in the first memblock to accommodate other essential system resources.
The crash kernel start address was set to 128MB offset by default to ensure that the crash kernel get some memory below the RMA region which is used to be of size 256MB. But given that the RMA region size can be 512MB or more, setting the crash kernel offset to mid of RMA size will leave enough space for the kernel to allocate memory for other system resources.
Since the above crash kernel offset change is only applicable to the LPAR platform, the LPAR feature detection is pushed before the crash kernel reservation. The rest of LPAR specific initialization will still be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It expect boot CPU to discover 1T segment support which is introduced by the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
--- arch/powerpc/kernel/rtas.c | 6 ++++++ arch/powerpc/kexec/core.c | 15 +++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-)
arch/powerpc/kernel/rtas.c +6 -0
@@ -1235,6 +1235,12 @@ int __init early_init_dt_scan_rtas(unsigned long node, entryp =of_get_flat_dt_prop (node,"linux,rtas-entry" ,NULL ); sizep =of_get_flat_dt_prop (node,"rtas-size" ,NULL ); +#ifdef CONFIG_PPC64 +/* need this feature to decide the crashkernel offset */ +if (of_get_flat_dt_prop (node,"ibm,hypertas-functions" ,NULL )) + powerpc_firmware_features |=FW_FEATURE_LPAR ; +#endif +if (basep && entryp && sizep) { rtas.base = *basep; rtas.entry = *entryp;
arch/powerpc/kexec/core.c +11 -4
@@ -134,11 +134,18 @@ void __init reserve_crashkernel(void)if (!crashk_res.start) {#ifdef CONFIG_PPC64 /* -* On 64bit we split the RMO in half but cap it at half of -* a small SLB (128MB) since the crash kernel needs to place -* itself and some stacks to be in the first segment. +* On the LPAR platform place the crash kernel to mid of +* RMA size (512MB or more) to ensure the crash kernel +* gets enough space to place itself and some stack to be +* in the first segment. At the same time normal kernel +* also get enough space to allocate memory for essential +* system resource in the first segment. Keep the crash +* kernel starts at 128MB offset on other platforms. */ - crashk_res.start =min (0x8000000ULL , (ppc64_rma_size /2 )); +if (firmware_has_feature (FW_FEATURE_LPAR )) + crashk_res.start = ppc64_rma_size /2 ; +else + crashk_res.start =min (0x8000000ULL , (ppc64_rma_size /2 ));#else crashk_res.start =KDUMP_KERNELBASE ;#endif
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 43/285 drm/amdgpu: Fix recursive locking warning
In reply to Greg Kroah-HartmanFrom: Rajneesh Bhardwaj <[email protected]>
[ Upstream commit 447c7997b62a5115ba4da846dcdee4fc12298a6a ]
Noticed the below warning while running a pytorch workload on vega10 GPUs. Change to trylock to avoid conflicts with already held reservation locks.
[ +0.000003] WARNING: possible recursive locking detected
[ +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted
[ +0.000004] --------------------------------------------
[ +0.000002] python/4822 is trying to acquire lock:
[ +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3},at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[ +0.000203]
but task is already holding lock:
[ +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3},
at: ttm_eu_reserve_buffers+0x270/0x470 [ttm]
[ +0.000017]
other info that might help us debug this:
[ +0.000002] Possible unsafe locking scenario:
[ +0.000003] CPU0
[ +0.000002] ----
[ +0.000002] lock(reservation_ww_class_mutex);
[ +0.000004] lock(reservation_ww_class_mutex);
[ +0.000003]
*** DEADLOCK ***[ +0.000002] May be due to missing lock nesting notation
[ +0.000003] 7 locks held by python/4822:
[ +0.000003] #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at:kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu]
[ +0.000232] #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at:amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu]
[ +0.000241] #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at:amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu]
[ +0.000236] #3: ffffb2b35606fd28 (reservation_ww_class_acquire){+.+.}-{0:0}, at:amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu] [ +0.000235] #4: ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at:ttm_eu_reserve_buffers+0x270/0x470 [ttm]
[ +0.000015] #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at:drm_dev_enter+0x5/0xa0 [drm]
[ +0.000038] #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3},
at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu]
[ +0.000195]
stack backtrace:
[ +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted 5.13.0-kfd-rajneesh #1030
[ +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02 08/29/2018
[ +0.000003] Call Trace: [ +0.000003] dump_stack+0x6d/0x89 [ +0.000010] __lock_acquire+0xb93/0x1a90 [ +0.000009] lock_acquire+0x25d/0x2d0 [ +0.000005] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] __ww_mutex_lock.constprop.17+0xca/0x1060 [ +0.000007] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] ? lock_release+0x13f/0x270 [ +0.000005] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000185] ttm_bo_release+0x4c6/0x580 [ttm] [ +0.000010] amdgpu_bo_unref+0x1a/0x30 [amdgpu] [ +0.000183] amdgpu_vm_free_table+0x76/0xa0 [amdgpu] [ +0.000189] amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu] [ +0.000189] amdgpu_vm_update_ptes+0x411/0x770 [amdgpu] [ +0.000191] amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu] [ +0.000191] amdgpu_vm_bo_update+0x251/0x610 [amdgpu] [ +0.000191] update_gpuvm_pte+0xcc/0x290 [amdgpu] [ +0.000229] ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu] [ +0.000190] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60 [amdgpu] [ +0.000234] kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu] [ +0.000218] kfd_ioctl+0x2b9/0x600 [amdgpu] [ +0.000216] ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu] [ +0.000216] ? lock_release+0x13f/0x270 [ +0.000006] ? __fget_files+0x107/0x1e0 [ +0.000007] __x64_sys_ioctl+0x8b/0xd0 [ +0.000007] do_syscall_64+0x36/0x70 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000007] RIP: 0033:0x7fbff90a7317 [ +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 [ +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX:00007fbff90a7317
[ +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI:
0000000000000004
[ +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09:00007fbcc402d880
[ +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12:00000000c0184b18
[ +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15:00007fbcc402d820
--- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +2 -1
@@ -1286,7 +1286,8 @@ void amdgpu_bo_release_notify(struct ttm_buffer_object *bo) !(abo->flags & AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE)) return; -dma_resv_lock (bo->base.resv,NULL ); +if (WARN_ON_ONCE (!dma_resv_trylock (bo->base.resv))) +return ; r =amdgpu_fill_buffer (abo,AMDGPU_POISON , bo->base.resv, &fence);if (!WARN_ON (r)) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 44/285 scsi: smartpqi: Fix rmmod stack trace
In reply to Greg Kroah-HartmanFrom: Don Brace <[email protected]>
[ Upstream commit c4ff687d25c05919382a759503bd3821689f4e2f ]
Prevent "BUG: scheduling while atomic: rmmod" stack trace.
Stop setting spin_locks before calling OS functions to remove devices.
--- drivers/scsi/smartpqi/smartpqi_init.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/scsi/smartpqi/smartpqi_init.c +2 -4
@@ -2513,17 +2513,15 @@ static void pqi_remove_all_scsi_devices(struct pqi_ctrl_info *ctrl_info)struct pqi_scsi_dev *device;struct pqi_scsi_dev *next; -spin_lock_irqsave (&ctrl_info->scsi_device_list_lock, flags); -list_for_each_entry_safe (device, next, &ctrl_info->scsi_device_list, scsi_device_list_entry) {if (pqi_is_device_added (device))pqi_remove_device (ctrl_info, device); +spin_lock_irqsave (&ctrl_info->scsi_device_list_lock, flags);list_del (&device->scsi_device_list_entry);pqi_free_device (device); +spin_unlock_irqrestore (&ctrl_info->scsi_device_list_lock, flags); } - -spin_unlock_irqrestore (&ctrl_info->scsi_device_list_lock, flags); }static int pqi_scan_scsi_devices (struct pqi_ctrl_info *ctrl_info)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 45/285 scsi: smartpqi: Fix kdump issue when controller is locked up
In reply to Greg Kroah-HartmanFrom: Mahesh Rajashekhara <[email protected]>
[ Upstream commit 3ada501d602abf02353445c03bb3258146445d90 ]
Avoid dropping into shell if the controller is in locked up state.
Driver issues SIS soft reset to bring back the controller to SIS mode while OS boots into kdump mode.
If the controller is in lockup state, SIS soft reset does not work.
Since the controller lockup code has not been cleared, driver considers the firmware is no longer up and running. Driver returns back an error code to OS and the kdump fails.
--- drivers/scsi/smartpqi/smartpqi_init.c | 39 ++++++++++++++++----------- 1 file changed, 23 insertions(+), 16 deletions(-)
drivers/scsi/smartpqi/smartpqi_init.c +23 -16
@@ -7855,6 +7855,21 @@ static int pqi_force_sis_mode(struct pqi_ctrl_info *ctrl_info)return pqi_revert_to_sis_mode (ctrl_info); } +static void pqi_perform_lockup_action (void ) +{ +switch (pqi_lockup_action) { +case PANIC : +panic ("FATAL: Smart Family Controller lockup detected" ); +break ; +case REBOOT : +emergency_restart (); +break ; +case NONE : +default : +break ; + } +} +static int pqi_ctrl_init (struct pqi_ctrl_info *ctrl_info) {int rc;
@@ -7879,8 +7894,15 @@ static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)* commands. */ rc =sis_wait_for_ctrl_ready (ctrl_info); -if (rc) +if (rc) { +if (reset_devices) { +dev_err (&ctrl_info->pci_dev->dev, +"kdump init failed with error %d\n" , rc); + pqi_lockup_action =REBOOT ; +pqi_perform_lockup_action (); + }return rc; + }/* * Get the controller properties. This allows us to determine
@@ -8605,21 +8627,6 @@ static int pqi_ofa_ctrl_restart(struct pqi_ctrl_info *ctrl_info, unsigned int dereturn pqi_ctrl_init_resume (ctrl_info); } -static void pqi_perform_lockup_action (void ) -{ -switch (pqi_lockup_action) { -case PANIC : -panic ("FATAL: Smart Family Controller lockup detected" ); -break ; -case REBOOT : -emergency_restart (); -break ; -case NONE : -default : -break ; - } -} -static struct pqi_raid_error_info pqi_ctrl_offline_raid_error_info = { .data_out_result =PQI_DATA_IN_OUT_HARDWARE_ERROR , .status =SAM_STAT_CHECK_CONDITION ,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 46/285 PCI: aardvark: Fix support for MSI interrupts
In reply to Greg Kroah-HartmanFrom: Pali Rohár <[email protected]>
[ Upstream commit b0b0b8b897f8e12b2368e868bd7cdc5742d5c5a9 ]
Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already set for the MSI chip. But when allocating MSI interrupt numbers for Multi-MSI, the numbers need to be properly aligned, otherwise endpoint devices send MSI interrupt with incorrect numbers.
Fix this issue by using function bitmap_find_free_region() instead of bitmap_find_next_zero_area().
To ensure that aligned MSI interrupt numbers are used by endpoint devices, we cannot use Linux virtual irq numbers (as they are random and not properly aligned). Instead we need to use the aligned hwirq numbers.
This change fixes receiving MSI interrupts on Armada 3720 boards and allows using NVMe disks which use Multi-MSI feature with 3 interrupts.
Without this NVMe disks freeze booting as linux nvme-core.c is waiting 60s for an interrupt.
--- drivers/pci/controller/pci-aardvark.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)
drivers/pci/controller/pci-aardvark.c +6 -10
@@ -1179,7 +1179,7 @@ static void advk_msi_irq_compose_msi_msg(struct irq_data *data, msg->address_lo =lower_32_bits (msi_msg); msg->address_hi =upper_32_bits (msi_msg); - msg->data = data->irq; + msg->data = data->hwirq; } static int advk_msi_set_affinity(struct irq_data *irq_data,
@@ -1196,15 +1196,11 @@ static int advk_msi_irq_domain_alloc(struct irq_domain *domain,int hwirq, i;mutex_lock (&pcie->msi_used_lock); - hwirq =bitmap_find_next_zero_area (pcie->msi_used,MSI_IRQ_NUM , -0 , nr_irqs,0 ); -if (hwirq >=MSI_IRQ_NUM ) { -mutex_unlock (&pcie->msi_used_lock); -return -ENOSPC ; - } - -bitmap_set (pcie->msi_used, hwirq, nr_irqs); + hwirq =bitmap_find_free_region (pcie->msi_used,MSI_IRQ_NUM , +order_base_2 (nr_irqs));mutex_unlock (&pcie->msi_used_lock); +if (hwirq <0 ) +return -ENOSPC ;for (i =0 ; i < nr_irqs; i++) irq_domain_set_info(domain, virq + i, hwirq + i,
@@ -1222,7 +1218,7 @@ static void advk_msi_irq_domain_free(struct irq_domain *domain,struct advk_pcie *pcie = domain->host_data;mutex_lock (&pcie->msi_used_lock); -bitmap_clear (pcie->msi_used, d->hwirq, nr_irqs); +bitmap_release_region (pcie->msi_used, d->hwirq,order_base_2 (nr_irqs));mutex_unlock (&pcie->msi_used_lock); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 47/285 iommu/arm-smmu-v3: fix event handling soft lockup
In reply to Greg Kroah-HartmanFrom: Zhou Guanghui <[email protected]>
[ Upstream commit 30de2b541af98179780054836b48825fcfba4408 ]
During event processing, events are read from the event queue one by one until the queue is empty.If the master device continuously requests address access at the same time and the SMMU generates events, the cyclic processing of the event takes a long time and softlockup warnings may be reported.
arm-smmu-v3 arm-smmu-v3.34.auto: event 0x0a received:
arm-smmu-v3 arm-smmu-v3.34.auto: 0x00007f220000280a
arm-smmu-v3 arm-smmu-v3.34.auto: 0x000010000000007e
arm-smmu-v3 arm-smmu-v3.34.auto: 0x00000000034e8670
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [irq/268-arm-smm:247] Call trace: _dev_info+0x7c/0xa0 arm_smmu_evtq_thread+0x1c0/0x230 irq_thread_fn+0x30/0x80 irq_thread+0x128/0x210 kthread+0x134/0x138 ret_from_fork+0x10/0x1c Kernel panic - not syncing: softlockup: hung tasks
Fix this by calling cond_resched() after the event information is printed.
--- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 1 + 1 file changed, 1 insertion(+)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +1 -0
@@ -1558,6 +1558,7 @@ static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev)dev_info (smmu->dev,"\t0x%016llx\n" , (unsigned long long )evt[i]); +cond_resched (); }/*
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 48/285 usb: ehci: add pci device support for Aspeed platforms
In reply to Greg Kroah-HartmanFrom: Neal Liu <[email protected]>
[ Upstream commit c3c9cee592828528fd228b01d312c7526c584a42 ]
Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci:
handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device.
--- drivers/usb/host/ehci-pci.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/usb/host/ehci-pci.c +9 -0
@@ -21,6 +21,9 @@ static const char hcd_name[] = "ehci-pci";/* defined here to avoid adding to pci_ids.h for single instance use */ #define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70 +#define PCI_VENDOR_ID_ASPEED 0x1a03 +#define PCI_DEVICE_ID_ASPEED_EHCI 0x2603 +/*-------------------------------------------------------------------------*/ #define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939static inline bool is_intel_quark_x1000 (struct pci_dev *pdev)
@@ -222,6 +225,12 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci->has_synopsys_hc_bug =1 ; }break ; +case PCI_VENDOR_ID_ASPEED : +if (pdev->device ==PCI_DEVICE_ID_ASPEED_EHCI ) { +ehci_info (ehci,"applying Aspeed HC workaround\n" ); + ehci->is_aspeed =1 ; + } +break ; }/* optional debug port, normally in the first BAR */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 49/285 KVM: arm64: Do not change the PMU event filter after a VCPU has run
In reply to Greg Kroah-HartmanFrom: Marc Zyngier <[email protected]>
[ Upstream commit 5177fe91e4cf78a659aada2c9cf712db4d788481 ]
Userspace can specify which events a guest is allowed to use with the KVM_ARM_VCPU_PMU_V3_FILTER attribute. The list of allowed events can be identified by a guest from reading the PMCEID{0,1}_EL0 registers.
Changing the PMU event filter after a VCPU has run can cause reads of the registers performed before the filter is changed to return different values than reads performed with the new event filter in place. The architecture defines the two registers as read-only, and this behaviour contradicts that.
Keep track when the first VCPU has run and deny changes to the PMU event filter to prevent this from happening.
--- Documentation/virt/kvm/devices/vcpu.rst | 2 +- arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 4 +++ arch/arm64/kvm/pmu-emul.c | 33 +++++++++++++++---------- 4 files changed, 26 insertions(+), 14 deletions(-)
Documentation/virt/kvm/devices/vcpu.rst +1 -1
@@ -70,7 +70,7 @@ irqchip. -ENODEV PMUv3 not supported or GIC not initialized -ENXIO PMUv3 not properly configured or in-kernel irqchip not configured as required prior to calling this attribute - -EBUSY PMUv3 already initialized + -EBUSY PMUv3 already initialized or a VCPU has already run -EINVAL Invalid filter range ======= ======================================================
arch/arm64/include/asm/kvm_host.h +1 -0
@@ -137,6 +137,7 @@ struct kvm_arch {/* Memory Tagging Extension enabled for the guest */ bool mte_enabled; +bool ran_once; };struct kvm_vcpu_fault_info {
arch/arm64/kvm/arm.c +4 -0
@@ -629,6 +629,10 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)if (kvm_vm_is_protected (kvm))kvm_call_hyp_nvhe (__pkvm_vcpu_init_traps, vcpu); +mutex_lock (&kvm->lock); + kvm->arch.ran_once = true; +mutex_unlock (&kvm->lock); +return ret; }
arch/arm64/kvm/pmu-emul.c +20 -13
@@ -921,6 +921,8 @@ static bool pmu_irq_is_valid(struct kvm *kvm, int irq)int kvm_arm_pmu_v3_set_attr (struct kvm_vcpu *vcpu,struct kvm_device_attr *attr) { +struct kvm *kvm = vcpu->kvm; +if (!kvm_vcpu_has_pmu (vcpu))return -ENODEV ;
@@ -938,7 +940,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)int __user *uaddr = (int __user *)(long )attr->addr;int irq; -if (!irqchip_in_kernel (vcpu->kvm)) +if (!irqchip_in_kernel (kvm))return -EINVAL ;if (get_user (irq, uaddr))
@@ -948,7 +950,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)if (!(irq_is_ppi (irq) ||irq_is_spi (irq)))return -EINVAL ; -if (!pmu_irq_is_valid (vcpu->kvm, irq)) +if (!pmu_irq_is_valid (kvm, irq))return -EINVAL ;if (kvm_arm_pmu_irq_initialized (vcpu))
@@ -963,7 +965,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)struct kvm_pmu_event_filter filter;int nr_events; - nr_events =kvm_pmu_event_mask (vcpu->kvm) +1 ; + nr_events =kvm_pmu_event_mask (kvm) +1 ; uaddr = (struct kvm_pmu_event_filter __user *)(long )attr->addr;
@@ -975,12 +977,17 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) filter.action != KVM_PMU_EVENT_DENY))return -EINVAL ; -mutex_lock (&vcpu->kvm->lock); +mutex_lock (&kvm->lock); + +if (kvm->arch.ran_once) { +mutex_unlock (&kvm->lock); +return -EBUSY ; + } -if (!vcpu->kvm->arch.pmu_filter) { - vcpu->kvm->arch.pmu_filter =bitmap_alloc (nr_events,GFP_KERNEL_ACCOUNT ); -if (!vcpu->kvm->arch.pmu_filter) { -mutex_unlock (&vcpu->kvm->lock); +if (!kvm->arch.pmu_filter) { + kvm->arch.pmu_filter =bitmap_alloc (nr_events,GFP_KERNEL_ACCOUNT ); +if (!kvm->arch.pmu_filter) { +mutex_unlock (&kvm->lock);return -ENOMEM ; }
@@ -991,17 +998,17 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)* events, the default is to allow. */ if (filter.action ==KVM_PMU_EVENT_ALLOW ) -bitmap_zero (vcpu->kvm->arch.pmu_filter, nr_events); +bitmap_zero (kvm->arch.pmu_filter, nr_events);else -bitmap_fill (vcpu->kvm->arch.pmu_filter, nr_events); +bitmap_fill (kvm->arch.pmu_filter, nr_events); }if (filter.action ==KVM_PMU_EVENT_ALLOW ) -bitmap_set (vcpu->kvm->arch.pmu_filter, filter.base_event, filter.nevents); +bitmap_set (kvm->arch.pmu_filter, filter.base_event, filter.nevents);else -bitmap_clear (vcpu->kvm->arch.pmu_filter, filter.base_event, filter.nevents); +bitmap_clear (kvm->arch.pmu_filter, filter.base_event, filter.nevents); -mutex_unlock (&vcpu->kvm->lock); +mutex_unlock (&kvm->lock);return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 50/285 PCI: endpoint: Fix alignment fault error in copy tests
In reply to Greg Kroah-HartmanFrom: Hou Zhiqiang <[email protected]>
[ Upstream commit 829cc0e2ea2d61fb6c54bc3f8a17f86c56e11864 ]
The copy test uses the memcpy() to copy data between IO memory spaces. This can trigger an alignment fault error (pasted the error logs below) because memcpy() may use unaligned accesses on a mapped memory that is just IO, which does not support unaligned memory accesses.
Fix it by using the correct memcpy API to copy from/to IO memory.
Alignment fault error logs:
Unable to handle kernel paging request at virtual address ffff8000101cd3c1
Mem abort info:
ESR = 0x96000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000021
CM = 0, WnR = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081773000
[ffff8000101cd3c1] pgd=1000000082410003, p4d=1000000082410003, pud=1000000082411003, pmd=1000000082412003, pte=0068004000001f13
Internal error: Oops: 96000021 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/0:0H Not tainted 5.15.0-rc1-next-20210914-dirty #2
Hardware name: LS1012A RDB Board (DT)
Workqueue: kpcitest pci_epf_test_cmd_handler
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x168/0x230
lr : pci_epf_test_cmd_handler+0x6f0/0xa68
sp : ffff80001003bce0
x29: ffff80001003bce0 x28: ffff800010135000 x27: ffff8000101e5000
x26: ffff8000101cd000 x25: ffff6cda941cf6c8 x24: 0000000000000000
x23: ffff6cda863f2000 x22: ffff6cda9096c800 x21: ffff800010135000
x20: ffff6cda941cf680 x19: ffffaf39fd999000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffaf39fd2b6000
x14: 0000000000000000 x13: 15f5c8fa2f984d57 x12: 604d132b60275454
x11: 065cee5e5fb428b6 x10: aae662eb17d0cf3e x9 : 1d97c9a1b4ddef37
x8 : 7541b65edebf928c x7 : e71937c4fc595de0 x6 : b8a0e09562430d1c
x5 : ffff8000101e5401 x4 : ffff8000101cd401 x3 : ffff8000101e5380
x2 : fffffffffffffff1 x1 : ffff8000101cd3c0 x0 : ffff8000101e5000
Call trace:
__memcpy+0x168/0x230
process_one_work+0x1ec/0x370
worker_thread+0x44/0x478
kthread+0x154/0x160
ret_from_fork+0x10/0x20
Code: a984346c a9c4342c f1010042 54fffee8 (a97c3c8e)
---[ end trace 568c28c7b6336335 ]------ drivers/pci/endpoint/functions/pci-epf-test.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/pci/endpoint/functions/pci-epf-test.c +11 -1
@@ -285,7 +285,17 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)if (ret)dev_err (dev,"Data transfer failed\n" ); }else { -memcpy (dst_addr, src_addr, reg->size); +void *buf; + + buf =kzalloc (reg->size,GFP_KERNEL ); +if (!buf) { + ret = -ENOMEM ; + goto err_map_addr; + } + +memcpy_fromio (buf, src_addr, reg->size); +memcpy_toio (dst_addr, buf, reg->size); +kfree (buf); }ktime_get_ts64 (&end);pci_epf_test_print_rate ("COPY" , reg->size, &start, &end, use_dma);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 51/285 tcp: Dont acquire inet_listen_hashbucket::lock with disabled BH.
In reply to Greg Kroah-HartmanFrom: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 4f9bf2a2f5aacf988e6d5e56b961ba45c5a25248 ]
Commit
9652dc2eb9e40 ("tcp: relax listening_hash operations")
removed the need to disable bottom half while acquiring listening_hash.lock. There are still two callers left which disable bottom half before the lock is acquired.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts as a lock to ensure that resources, that are protected by disabling bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with disabled bottom halves is also acquired with enabled bottom halves followed by disabling bottom halves. This is the reverse locking order. It has been observed with inet_listen_hashbucket::lock:
local_bh_disable() + spin_lock(&ilb->lock):
inet_listen()
inet_csk_listen_start()
sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
spin_lock(&ilb->lock);
acquire(&ilb->lock);Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
tcp_seq_next()
listening_get_next()
spin_lock(&ilb2->lock);
acquire(&ilb2->lock); tcp4_seq_show()
get_tcp4_sock()
sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
acquire(softirq_ctrl) // <---- whoops
acquire(&sk->sk_callback_lock)Drop local_bh_disable() around __inet_hash() which acquires listening_hash->lock. Split inet_unhash() and acquire the listen_hashbucket lock without disabling bottom halves; the inet_ehash lock with disabled bottom halves.
--- net/ipv4/inet_hashtables.c | 53 ++++++++++++++++++++++--------------- net/ipv6/inet6_hashtables.c | 5 +--- 2 files changed, 33 insertions(+), 25 deletions(-)
net/ipv4/inet_hashtables.c +32 -21
@@ -637,7 +637,9 @@ int __inet_hash(struct sock *sk, struct sock *osk)int err =0 ;if (sk->sk_state !=TCP_LISTEN ) { +local_bh_disable ();inet_ehash_nolisten (sk, osk,NULL ); +local_bh_enable ();return 0 ; }WARN_ON (!sk_unhashed (sk));
@@ -669,45 +671,54 @@ int inet_hash(struct sock *sk) {int err =0 ; -if (sk->sk_state !=TCP_CLOSE ) { -local_bh_disable (); +if (sk->sk_state !=TCP_CLOSE ) err =__inet_hash (sk,NULL ); -local_bh_enable (); - }return err; }EXPORT_SYMBOL_GPL (inet_hash); -void inet_unhash (struct sock *sk) +static void __inet_unhash (struct sock *sk,struct inet_listen_hashbucket *ilb) { -struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo; -struct inet_listen_hashbucket *ilb =NULL ; -spinlock_t *lock; -if (sk_unhashed (sk))return ; -if (sk->sk_state ==TCP_LISTEN ) { - ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn (sk)]; - lock = &ilb->lock; - }else { - lock =inet_ehash_lockp (hashinfo, sk->sk_hash); - } -spin_lock_bh (lock); -if (sk_unhashed (sk)) - goto unlock; -if (rcu_access_pointer (sk->sk_reuseport_cb))reuseport_stop_listen_sock (sk);if (ilb) { +struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo; +inet_unhash2 (hashinfo, sk); ilb->count--; }__sk_nulls_del_node_init_rcu (sk);sock_prot_inuse_add (sock_net (sk), sk->sk_prot,-1 ); -unlock: -spin_unlock_bh (lock); +} + +void inet_unhash (struct sock *sk) +{ +struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo; + +if (sk_unhashed (sk)) +return ; + +if (sk->sk_state ==TCP_LISTEN ) { +struct inet_listen_hashbucket *ilb; + + ilb = &hashinfo->listening_hash[inet_sk_listen_hashfn (sk)]; +/* Don't disable bottom halves while acquiring the lock to +* avoid circular locking dependency on PREEMPT_RT. +*/ +spin_lock (&ilb->lock); +__inet_unhash (sk, ilb); +spin_unlock (&ilb->lock); + }else { +spinlock_t *lock =inet_ehash_lockp (hashinfo, sk->sk_hash); + +spin_lock_bh (lock); +__inet_unhash (sk,NULL ); +spin_unlock_bh (lock); + } }EXPORT_SYMBOL_GPL (inet_unhash);
net/ipv6/inet6_hashtables.c +1 -4
@@ -333,11 +333,8 @@ int inet6_hash(struct sock *sk) {int err =0 ; -if (sk->sk_state !=TCP_CLOSE ) { -local_bh_disable (); +if (sk->sk_state !=TCP_CLOSE ) err =__inet_hash (sk,NULL ); -local_bh_enable (); - }return err; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 52/285 PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
In reply to Greg Kroah-HartmanFrom: Manivannan Sadhasivam <[email protected]>
[ Upstream commit 9f72d4757cbe4d1ed669192f6d23817c9e437c4b ]
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as SM8450 does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits.
This results in timeouts like below:
pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago)
Add the device to the Command Completed quirk to mark commands "completed" immediately unless they change the "Control" bits.
--- drivers/pci/hotplug/pciehp_hpc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/pci/hotplug/pciehp_hpc.c +2 -0
@@ -1086,6 +1086,8 @@ static void quirk_cmd_compl(struct pci_dev *pdev) }DECLARE_PCI_FIXUP_CLASS_EARLY (PCI_VENDOR_ID_INTEL ,PCI_ANY_ID ,PCI_CLASS_BRIDGE_PCI ,8 , quirk_cmd_compl); +DECLARE_PCI_FIXUP_CLASS_EARLY (PCI_VENDOR_ID_QCOM ,0x0110 , +PCI_CLASS_BRIDGE_PCI ,8 , quirk_cmd_compl);DECLARE_PCI_FIXUP_CLASS_EARLY (PCI_VENDOR_ID_QCOM ,0x0400 ,PCI_CLASS_BRIDGE_PCI ,8 , quirk_cmd_compl); DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0401,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 53/285 scsi: mpi3mr: Fix reporting of actual data transfer size
In reply to Greg Kroah-HartmanFrom: Sreekanth Reddy <[email protected]>
[ Upstream commit 9992246127246a27cc7184f05cce6f62ac48f84e ]
The driver is missing to set the residual size while completing an I/O. Ensure proper data transfer size is reported to the kernel on I/O completion based on the transfer length reported by the firmware.
--- drivers/scsi/mpi3mr/mpi3mr_os.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/mpi3mr/mpi3mr_os.c +2 -0
@@ -2204,6 +2204,8 @@ void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, scmd->result =DID_OK <<16 ; goto out_success; } + +scsi_set_resid (scmd,scsi_bufflen (scmd) - xfer_count); if (ioc_status == MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_count == 0 && (scsi_status == MPI3_SCSI_STATUS_BUSY || scsi_status == MPI3_SCSI_STATUS_RESERVATION_CONFLICT ||
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 54/285 scsi: mpi3mr: Fix memory leaks
In reply to Greg Kroah-HartmanFrom: Sreekanth Reddy <[email protected]>
[ Upstream commit d44b5fefb22e139408ae12b864da1ecb9ad9d1d2 ]
Fix memory leaks related to operational reply queue's memory segments which are not getting freed while unloading the driver.
--- drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/mpi3mr/mpi3mr_fw.c +1 -1
@@ -1275,7 +1275,7 @@ static void mpi3mr_free_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx)MPI3MR_MAX_SEG_LIST_SIZE , mrioc->req_qinfo[q_idx].q_segment_list, mrioc->req_qinfo[q_idx].q_segment_list_dma); - mrioc->op_reply_qinfo[q_idx].q_segment_list =NULL ; + mrioc->req_qinfo[q_idx].q_segment_list =NULL ; } }else size = mrioc->req_qinfo[q_idx].segment_qd *
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 55/285 powerpc/set_memory: Avoid spinlock recursion in change_page_attr()
In reply to Greg Kroah-HartmanFrom: Christophe Leroy <[email protected]>
[ Upstream commit a4c182ecf33584b9b2d1aa9dad073014a504c01f ]
Commit 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines") included a spin_lock() to change_page_attr() in order to safely perform the three step operations. But then commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses") modify it to use pte_update() and do the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217 [ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0 [ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523 [ 15.373350] Workqueue: events do_free_init [ 15.377615] Call Trace: [ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable) [ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4 [ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0 [ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8 [ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94 [ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134 [ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8 [ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c [ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8 [ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94 [ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8 [ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8 [ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210 [ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers anymore. Because all platforms have different combination of bits, it is not easy to use those bits directly. But all have the _PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you know which bit gets cleared and which bit get set when changing exec permission.
--- arch/powerpc/mm/pageattr.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-)
arch/powerpc/mm/pageattr.c +13 -19
@@ -15,12 +15,14 @@#include <asm/pgtable.h> +static pte_basic_t pte_update_delta (pte_t *ptep,unsigned long addr, +unsigned long old,unsigned long new) +{ +return pte_update (&init_mm, addr, ptep, old & ~new, new & ~old,0 ); +} +/* -* Updates the attributes of a page in three steps: -* -* 1. take the page_table_lock -* 2. install the new entry with the updated attributes -* 3. flush the TLB +* Updates the attributes of a page atomically. * * This sequence is safe against concurrent updates, and also allows updating the * attributes of a page currently being executed or accessed.
@@ -28,25 +30,21 @@static int change_page_attr (pte_t *ptep,unsigned long addr,void *data) {long action = (long )data; -pte_t pte; -spin_lock (&init_mm.page_table_lock); - - pte =ptep_get (ptep); - -/* modify the PTE bits as desired, then apply */ +/* modify the PTE bits as desired */ switch (action) {case SET_MEMORY_RO : - pte =pte_wrprotect (pte); +/* Don't clear DIRTY bit */ +pte_update_delta (ptep, addr, _PAGE_KERNEL_RW & ~_PAGE_DIRTY, _PAGE_KERNEL_RO);break ;case SET_MEMORY_RW : - pte =pte_mkwrite (pte_mkdirty (pte)); +pte_update_delta (ptep, addr, _PAGE_KERNEL_RO, _PAGE_KERNEL_RW);break ;case SET_MEMORY_NX : - pte =pte_exprotect (pte); +pte_update_delta (ptep, addr, _PAGE_KERNEL_ROX, _PAGE_KERNEL_RO);break ;case SET_MEMORY_X : - pte =pte_mkexec (pte); +pte_update_delta (ptep, addr, _PAGE_KERNEL_RO, _PAGE_KERNEL_ROX);break ;case SET_MEMORY_NP :pte_update (&init_mm, addr, ptep, _PAGE_PRESENT,0 ,0 );
@@ -59,16 +57,12 @@ static int change_page_attr(pte_t *ptep, unsigned long addr, void *data)break ; } -pte_update (&init_mm, addr, ptep, ~0UL ,pte_val (pte),0 ); -/* See ptesync comment in radix__set_pte_at() */ if (radix_enabled ()) asmvolatile ("ptesync" : : :"memory" );flush_tlb_kernel_range (addr, addr +PAGE_SIZE ); -spin_unlock (&init_mm.page_table_lock); -return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 56/285 power: supply: axp288-charger: Set Vhold to 4.4V
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
[ Upstream commit 5ac121b81b4051e7fc83d5b3456a5e499d5bd147 ]
The AXP288's recommended and factory default Vhold value (minimum input voltage below which the input current draw will be reduced) is 4.4V. This lines up with other charger IC's such as the TI bq2419x/bq2429x series which use 4.36V or 4.44V.
For some reason some BIOS-es initialize Vhold to 4.6V or even 4.7V which combined with the typical voltage drop over typically low wire gauge micro-USB cables leads to the input-current getting capped below 1A (with a 2A capable dedicated charger) based on Vhold.
This leads to slow charging, or even to the device slowly discharging if the device is in heavy use.
As the Linux AXP288 drivers use the builtin BC1.2 charger detection and send the input-current-limit according to the detected charger there really is no reason not to use the recommended 4.4V Vhold.
Set Vhold to 4.4V to fix the slow charging issue on various devices.
There is one exception, the special-case of the HP X2 2-in-1s which combine this BC1.2 capable PMIC with a Type-C port and a 5V/3A factory provided charger with a Type-C plug which does not do BC1.2. These have their input-current-limit hardcoded to 3A (like under Windows) and use a higher Vhold on purpose to limit the current when used with other chargers. To avoid touching Vhold on these HP X2 laptops the code setting Vhold is added to an else branch of the if checking for these models.
Note this also fixes the sofar unused VBUS_ISPOUT_VHOLD_SET_MASK define, which was wrong.
--- drivers/power/supply/axp288_charger.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/power/supply/axp288_charger.c +12 -2
@@ -42,11 +42,11 @@#define VBUS_ISPOUT_CUR_LIM_1500MA 0x1/* 1500mA */ #define VBUS_ISPOUT_CUR_LIM_2000MA 0x2/* 2000mA */ #define VBUS_ISPOUT_CUR_NO_LIM 0x3/* 2500mA */ -#define VBUS_ISPOUT_VHOLD_SET_MASK 0x31 +#define VBUS_ISPOUT_VHOLD_SET_MASK 0x38#define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3#define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000/* 4000mV */ #define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100/* 100mV */ -#define VBUS_ISPOUT_VHOLD_SET_4300MV 0x3/* 4300mV */ +#define VBUS_ISPOUT_VHOLD_SET_4400MV 0x4/* 4400mV */ #define VBUS_ISPOUT_VBUS_PATH_DIS BIT(7)#define CHRG_CCCV_CC_MASK 0xf/* 4 bits */
@@ -769,6 +769,16 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info) ret =axp288_charger_vbus_path_select (info, true);if (ret <0 )return ret; + }else { +/* Set Vhold to the factory default / recommended 4.4V */ + val =VBUS_ISPOUT_VHOLD_SET_4400MV <<VBUS_ISPOUT_VHOLD_SET_BIT_POS ; + ret =regmap_update_bits (info->regmap,AXP20X_VBUS_IPSOUT_MGMT , +VBUS_ISPOUT_VHOLD_SET_MASK , val); +if (ret <0 ) { +dev_err (&info->pdev->dev,"register(%x) write error(%d)\n" , +AXP20X_VBUS_IPSOUT_MGMT , ret); +return ret; + } }/* Read current charge voltage and current limit */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 57/285 drm/amd/display: reset lane settings after each PHY repeater LT
In reply to Greg Kroah-HartmanFrom: Sung Joon Kim <[email protected]>
[ Upstream commit 3b853c316c9321e195414a6fb121d1c2d45b1e87 ]
[why]
In LTTPR non-transparent mode, we need
to reset the cached lane settings before performing link training on the next PHY repeater. Otherwise, the cached lane settings will be used for the next clock recovery e.g. VS = MAX (3) which should not be the case according to the DP specs. We expect to use minimum lane settings on each clock recovery sequence.
[how]
Reset DPCD and HW lane settings on each repeater LT. Set training pattern to 0 for the repeater that failed LT at the proper place.
--- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +10 -5
@@ -2124,21 +2124,26 @@ static enum link_training_result dp_perform_8b_10b_link_training( repeater_id--) { status =perform_clock_recovery_sequence (link, lt_settings, repeater_id); -if (status !=LINK_TRAINING_SUCCESS ) +if (status !=LINK_TRAINING_SUCCESS ) { +repeater_training_done (link, repeater_id);break ; + } status =perform_channel_equalization_sequence (link, lt_settings, repeater_id); +repeater_training_done (link, repeater_id); +if (status !=LINK_TRAINING_SUCCESS )break ; -repeater_training_done (link, repeater_id); +for (lane =0 ; lane <LANE_COUNT_DP_MAX ; lane++) { + lt_settings->dpcd_lane_settings[lane].raw =0 ; + lt_settings->hw_lane_settings[lane].VOLTAGE_SWING =0 ; + lt_settings->hw_lane_settings[lane].PRE_EMPHASIS =0 ; + } } - -for (lane =0 ; lane < (uint8_t )lt_settings->link_settings.lane_count; lane++) - lt_settings->dpcd_lane_settings[lane].raw =0 ; }if (status ==LINK_TRAINING_SUCCESS ) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 58/285 net/mlx5e: Disable TX queues before registering the netdev
In reply to Greg Kroah-HartmanFrom: Maxim Mikityanskiy <[email protected]>
[ Upstream commit d08c6e2a4d0308a7922d7ef3b1b3af45d4096aad ]
Normally, the queues are disabled when the channels are deactivated, and enabled when the channels are activated. However, on register, the channels are not active, but the queues are enabled by default. This change fixes it, preventing mlx5e_xmit from running when the channels are deactivated in the beginning.
--- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +1 -0
@@ -5223,6 +5223,7 @@ mlx5e_create_netdev(struct mlx5_core_dev *mdev, const struct mlx5e_profile *prof }netif_carrier_off (netdev); +netif_tx_disable (netdev);dev_net_set (netdev,mlx5_core_net (mdev));return netdev;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 59/285 usb: dwc3: pci: Set the swnode from inside dwc3_pci_quirks()
In reply to Greg Kroah-HartmanFrom: Hans de Goede <[email protected]>
[ Upstream commit e285cb403994419e997749c9a52b9370884ae0c8 ]
The quirk handling may need to set some different properties which means using a different swnode, move the setting of the swnode to inside dwc3_pci_quirks() so that the quirk handling can choose a different swnode.
--- drivers/usb/dwc3/dwc3-pci.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/usb/dwc3/dwc3-pci.c +4 -7
@@ -185,7 +185,8 @@ static const struct software_node dwc3_pci_amd_mr_swnode = { .properties = dwc3_pci_mr_properties, }; -static int dwc3_pci_quirks (struct dwc3_pci *dwc) +static int dwc3_pci_quirks (struct dwc3_pci *dwc, +const struct software_node *swnode) {struct pci_dev *pdev = dwc->pci;
@@ -242,7 +243,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) } } -return 0 ; +return device_add_software_node (&dwc->dwc3->dev, swnode); }#ifdef CONFIG_PM
@@ -307,11 +308,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) dwc->dwc3->dev.parent = dev;ACPI_COMPANION_SET (&dwc->dwc3->dev,ACPI_COMPANION (dev)); - ret =device_add_software_node (&dwc->dwc3->dev, (void *)id->driver_data); -if (ret <0 ) - goto err; - - ret =dwc3_pci_quirks (dwc); + ret =dwc3_pci_quirks (dwc, (void *)id->driver_data);if (ret) goto err;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 60/285 iwlwifi: mvm: Correctly set fragmented EBS
In reply to Greg Kroah-HartmanFrom: Ilan Peer <[email protected]>
[ Upstream commit d8d4dd26b9e0469baf5017f0544d852fd4e3fb6d ]
Currently, fragmented EBS was set for a channel only if the 'hb_type' was set to fragmented or balanced scan. However, 'hb_type' is set only in case of CDB, and thus fragmented EBS is never set for a channel for non-CDB devices. Fix it.
--- drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/scan.c +4 -1
@@ -1890,7 +1890,10 @@ static u8 iwl_mvm_scan_umac_chan_flags_v2(struct iwl_mvm *mvm,IWL_SCAN_CHANNEL_FLAG_CACHE_ADD ;/* set fragmented ebs for fragmented scan on HB channels */ -if (iwl_mvm_is_scan_fragmented (params->hb_type)) +if ((!iwl_mvm_is_cdb_supported (mvm) && +iwl_mvm_is_scan_fragmented (params->type)) || + (iwl_mvm_is_cdb_supported (mvm) && +iwl_mvm_is_scan_fragmented (params->hb_type))) flags |=IWL_SCAN_CHANNEL_FLAG_EBS_FRAG ;return flags;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 61/285 iwlwifi: fix small doc mistake for iwl_fw_ini_addr_val
In reply to Greg Kroah-HartmanFrom: Luca Coelho <[email protected]>
[ Upstream commit 3009c797c4b3840495e8f48d8d07f48d2ddfed80 ]
There was a small copy and paste mistake in the doc declaration of iwl_fw_ini_addr_val. Fix it.
--- drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h +2 -3
@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* -* Copyright (C) 2018-2021 Intel Corporation +* Copyright (C) 2018-2022 Intel Corporation */ #ifndef __iwl_fw_dbg_tlv_h__#define __iwl_fw_dbg_tlv_h__
@@ -244,11 +244,10 @@ struct iwl_fw_ini_hcmd_tlv { } __packed;/* FW_TLV_DEBUG_HCMD_API_S_VER_1 */ /** -* struct iwl_fw_ini_conf_tlv - preset configuration TLV +* struct iwl_fw_ini_addr_val - Address and value to set it to * * @address: the base address * @value: value to set at address -*/ struct iwl_fw_ini_addr_val {__le32 address;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 62/285 iwlwifi: mvm: move only to an enabled channel
In reply to Greg Kroah-HartmanFrom: Miri Korenblit <[email protected]>
[ Upstream commit e04135c07755d001b5cde61048c69a7cc84bb94b ]
During disassociation we're decreasing the phy's ref count. If the ref count becomes 0, we're configuring the phy ctxt to the default channel (the lowest channel which the device can operate on). Currently we're not checking whether the the default channel is enabled or not. Fix it by configuring the phy ctxt to the lowest channel which is enabled.
--- .../net/wireless/intel/iwlwifi/mvm/phy-ctxt.c | 31 +++++++++++++------ 1 file changed, 22 insertions(+), 9 deletions(-)
drivers/net/wireless/intel/iwlwifi/mvm/phy-ctxt.c +22 -9
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* -* Copyright (C) 2012-2014, 2018-2021 Intel Corporation +* Copyright (C) 2012-2014, 2018-2022 Intel Corporation * Copyright (C) 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2017 Intel Deutschland GmbH */
@@ -295,18 +295,31 @@ void iwl_mvm_phy_ctxt_unref(struct iwl_mvm *mvm, struct iwl_mvm_phy_ctxt *ctxt)* otherwise we might not be able to reuse this phy. */ if (ctxt->ref ==0 ) { -struct ieee80211_channel *chan; +struct ieee80211_channel *chan =NULL ;struct cfg80211_chan_def chandef; -struct ieee80211_supported_band *sband =NULL ; -enum nl80211_band band =NL80211_BAND_2GHZ ; +struct ieee80211_supported_band *sband; +enum nl80211_band band; +int channel; -while (!sband && band <NUM_NL80211_BANDS ) - sband = mvm->hw->wiphy->bands[band++]; +for (band =NL80211_BAND_2GHZ ; band <NUM_NL80211_BANDS ; band++) { + sband = mvm->hw->wiphy->bands[band]; -if (WARN_ON (!sband)) -return ; +if (!sband) +continue ; + +for (channel =0 ; channel < sband->n_channels; channel++) +if (!(sband->channels[channel].flags & +IEEE80211_CHAN_DISABLED )) { + chan = &sband->channels[channel]; +break ; + } - chan = &sband->channels[0 ]; +if (chan) +break ; + } + +if (WARN_ON (!chan)) +return ;cfg80211_chandef_create (&chandef, chan,NL80211_CHAN_NO_HT );iwl_mvm_phy_ctxt_changed (mvm, ctxt, &chandef,1 ,1 );
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 63/285 drm/msm/dsi: Remove spurious IRQF_ONESHOT flag
In reply to Greg Kroah-HartmanFrom: Daniel Thompson <[email protected]>
[ Upstream commit 24b176d8827d167ac3b379317f60c0985f6e95aa ]
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of irqs (and for "normal" kernels it is a nop). In this case I can find no evidence that suppressing forced threading is intentional. Had it been intentional then a driver must adopt the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels (and avoid calling any kernel API that uses regular spinlocks).
Fix this by removing the spurious additional flag.
This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI with PREEMPT_RT enabled.
--- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/dsi/dsi_host.c +1 -1
@@ -1871,7 +1871,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)/* do not autoenable, will be enabled later */ ret =devm_request_irq (&pdev->dev, msm_host->irq, dsi_host_irq, -IRQF_TRIGGER_HIGH |IRQF_ONESHOT |IRQF_NO_AUTOEN , +IRQF_TRIGGER_HIGH |IRQF_NO_AUTOEN ,"dsi_isr" , msm_host);if (ret <0 ) { dev_err(&pdev->dev, "failed to request IRQ%u: %d\n",
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 64/285 rtw89: fix RCU usage in rtw89_core_txq_push()
In reply to Greg Kroah-HartmanFrom: Jiri Kosina <[email protected]>
[ Upstream commit f3d825a35920714fb7f73e4d4f36ea2328860660 ]
ieee80211_tx_h_select_key() is performing a series of RCU dereferences, but rtw89_core_txq_push() is calling it (via ieee80211_tx_dequeue_ni()) without RCU read-side lock held; fix that.
This addresses the splat below.
=============================
WARNING: suspicious RCU usage
5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G E
-----------------------------
net/mac80211/tx.c:593 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by kworker/u33:0/184:
#0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660 #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660
stack backtrace: CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G E 5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] Call Trace: <TASK> dump_stack_lvl+0x58/0x71 ieee80211_tx_h_select_key+0x2c0/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea] process_one_work+0x2d8/0x660 worker_thread+0x39/0x3e0 ? process_one_work+0x660/0x660 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>
=============================
WARNING: suspicious RCU usage
5.17.0-rc4-00003-gccad664b7f14 #3 Tainted: G E
-----------------------------
net/mac80211/tx.c:607 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by kworker/u33:0/184:
#0: ffff9c0b14811d38 ((wq_completion)rtw89_tx_wq){+.+.}-{0:0}, at: process_one_work+0x258/0x660 #1: ffffb97380cf3e78 ((work_completion)(&rtwdev->txq_work)){+.+.}-{0:0}, at: process_one_work+0x258/0x660
stack backtrace: CPU: 8 PID: 184 Comm: kworker/u33:0 Tainted: G E 5.17.0-rc4-00003-gccad664b7f14 #3 473b49ab0e7c2d6af2900c756bfd04efd7a9de13 Hardware name: LENOVO 20UJS2B905/20UJS2B905, BIOS R1CET63W(1.32 ) 04/09/2021 Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] Call Trace: <TASK> dump_stack_lvl+0x58/0x71 ieee80211_tx_h_select_key+0x464/0x530 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] ieee80211_tx_dequeue+0x1a7/0x1260 [mac80211 911c23e2351c0ae60b597a67b1204a5ea955e365] rtw89_core_txq_work+0x1a6/0x420 [rtw89_core b39ba493f2e517ad75e0f8187ecc24edf58bbbea] process_one_work+0x2d8/0x660 worker_thread+0x39/0x3e0 ? process_one_work+0x660/0x660 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>
--- drivers/net/wireless/realtek/rtw89/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/realtek/rtw89/core.c +4 -1
@@ -1501,11 +1501,12 @@ static void rtw89_core_txq_push(struct rtw89_dev *rtwdev,unsigned long i;int ret; +rcu_read_lock ();for (i =0 ; i < frame_cnt; i++) { skb =ieee80211_tx_dequeue_ni (rtwdev->hw, txq);if (!skb) {rtw89_debug (rtwdev,RTW89_DBG_TXRX ,"dequeue a NULL skb\n" ); -return ; + goto out; }rtw89_core_txq_check_agg (rtwdev, rtwtxq, skb); ret =rtw89_core_tx_write (rtwdev, vif, sta, skb,NULL );
@@ -1515,6 +1516,8 @@ static void rtw89_core_txq_push(struct rtw89_dev *rtwdev,break ; } } +out: +rcu_read_unlock (); }static u32 rtw89_check_and_reclaim_tx_resource (struct rtw89_dev *rtwdev,u8 tid)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 65/285 ipv4: Invalidate neighbour for broadcast address upon address addition
In reply to Greg Kroah-HartmanFrom: Ido Schimmel <[email protected]>
[ Upstream commit 0c51e12e218f20b7d976158fdc18019627326f7a ]
In case user space sends a packet destined to a broadcast address when a matching broadcast route is not configured, the kernel will create a unicast neighbour entry that will never be resolved [1].
When the broadcast route is configured, the unicast neighbour entry will not be invalidated and continue to linger, resulting in packets being dropped.
Solve this by invalidating unresolved neighbour entries for broadcast addresses after routes for these addresses are internally configured by the kernel. This allows the kernel to create a broadcast neighbour entry following the next route lookup.
Another possible solution that is more generic but also more complex is to have the ARP code register a listener to the FIB notification chain and invalidate matching neighbour entries upon the addition of broadcast routes.
It is also possible to wave off the issue as a user space problem, but it seems a bit excessive to expect user space to be that intimately familiar with the inner workings of the FIB/neighbour kernel code.
[1] https://lore.kernel.org/netdev/[email protected]/
--- include/net/arp.h | 1 + net/ipv4/arp.c | 9 +++++++-- net/ipv4/fib_frontend.c | 5 ++++- 3 files changed, 12 insertions(+), 3 deletions(-)
include/net/arp.h +1 -0
@@ -71,6 +71,7 @@ void arp_send(int type, int ptype, __be32 dest_ip, const unsigned char *src_hw, const unsigned char *th);int arp_mc_map (__be32 addr,u8 *haddr,struct net_device *dev,int dir);void arp_ifdown (struct net_device *dev); +int arp_invalidate (struct net_device *dev,__be32 ip,bool force); struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, struct net_device *dev, __be32 src_ip,
net/ipv4/arp.c +7 -2
@@ -1116,13 +1116,18 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev)return err; } -static int arp_invalidate (struct net_device *dev,__be32 ip) +int arp_invalidate (struct net_device *dev,__be32 ip,bool force) {struct neighbour *neigh =neigh_lookup (&arp_tbl, &ip, dev);int err = -ENXIO ;struct neigh_table *tbl = &arp_tbl;if (neigh) { +if ((neigh->nud_state &NUD_VALID ) && !force) { +neigh_release (neigh); +return 0 ; + } +if (neigh->nud_state & ~NUD_NOARP ) err = neigh_update(neigh, NULL, NUD_FAILED, NEIGH_UPDATE_F_OVERRIDE|
@@ -1169,7 +1174,7 @@ static int arp_req_delete(struct net *net, struct arpreq *r,if (!dev)return -EINVAL ; } -return arp_invalidate (dev, ip); +return arp_invalidate (dev, ip, true); }/*
net/ipv4/fib_frontend.c +4 -1
@@ -1112,9 +1112,11 @@ void fib_add_ifaddr(struct in_ifaddr *ifa)return ;/* Add broadcast address, if it is explicitly assigned. */ -if (ifa->ifa_broadcast && ifa->ifa_broadcast !=htonl (0xFFFFFFFF )) +if (ifa->ifa_broadcast && ifa->ifa_broadcast !=htonl (0xFFFFFFFF )) {fib_magic (RTM_NEWROUTE ,RTN_BROADCAST , ifa->ifa_broadcast,32 , prim,0 ); +arp_invalidate (dev, ifa->ifa_broadcast, false); + }if (!ipv4_is_zeronet (prefix) && !(ifa->ifa_flags &IFA_F_SECONDARY ) && (prefix != addr || ifa->ifa_prefixlen <32 )) {
@@ -1128,6 +1130,7 @@ void fib_add_ifaddr(struct in_ifaddr *ifa)if (ifa->ifa_prefixlen <31 ) {fib_magic (RTM_NEWROUTE ,RTN_BROADCAST , prefix | ~mask,32 , prim,0 ); +arp_invalidate (dev, prefix | ~mask, false); } } }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 66/285 dm ioctl: prevent potential spectre v1 gadget
In reply to Greg Kroah-HartmanFrom: Jordy Zomer <[email protected]>
[ Upstream commit cd9c88da171a62c4b0f1c70e50c75845969fbc18 ]
It appears like cmd could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec.
--- drivers/md/dm-ioctl.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/md/dm-ioctl.c +2 -0
@@ -18,6 +18,7 @@#include <linux/dm-ioctl.h> #include <linux/hdreg.h> #include <linux/compat.h> +#include <linux/nospec.h> #include <linux/uaccess.h> #include <linux/ima.h>
@@ -1788,6 +1789,7 @@ static ioctl_fn lookup_ioctl(unsigned int cmd, int *ioctl_flags)if (unlikely (cmd >=ARRAY_SIZE (_ioctls)))return NULL ; + cmd =array_index_nospec (cmd,ARRAY_SIZE (_ioctls)); *ioctl_flags = _ioctls[cmd].flags;return _ioctls[cmd].fn; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 67/285 dm: requeue IO if mapping table not yet available
In reply to Greg Kroah-HartmanFrom: Mike Snitzer <[email protected]>
[ Upstream commit fa247089de9936a46e290d4724cb5f0b845600f5 ]
Update both bio-based and request-based DM to requeue IO if the mapping table not available.
This race of IO being submitted before the DM device ready is so narrow, yet possible for initial table load given that the DM device's request_queue is created prior, that it best to requeue IO to handle this unlikely case.
--- drivers/md/dm-rq.c | 7 ++++++- drivers/md/dm.c | 11 +++-------- 2 files changed, 9 insertions(+), 9 deletions(-)
drivers/md/dm-rq.c +6 -1
@@ -499,8 +499,13 @@ static blk_status_t dm_mq_queue_rq(struct blk_mq_hw_ctx *hctx,if (unlikely (!ti)) {int srcu_idx; -struct dm_table *map =dm_get_live_table (md, &srcu_idx); +struct dm_table *map; + map =dm_get_live_table (md, &srcu_idx); +if (unlikely (!map)) { +dm_put_live_table (md, srcu_idx); +return BLK_STS_RESOURCE ; + } ti =dm_table_find_target (map,0 );dm_put_live_table (md, srcu_idx); }
drivers/md/dm.c +3 -8
@@ -1587,15 +1587,10 @@ static void dm_submit_bio(struct bio *bio)struct dm_table *map; map =dm_get_live_table (md, &srcu_idx); -if (unlikely (!map)) { -DMERR_LIMIT ("%s: mapping table unavailable, erroring io" , -dm_device_name (md)); -bio_io_error (bio); - goto out; - } -/* If suspended, queue this IO for later */ -if (unlikely (test_bit (DMF_BLOCK_IO_FOR_SUSPEND , &md->flags))) { +/* If suspended, or map not yet available, queue this IO for later */ +if (unlikely (test_bit (DMF_BLOCK_IO_FOR_SUSPEND , &md->flags)) || +unlikely (!map)) {if (bio->bi_opf &REQ_NOWAIT )bio_wouldblock_error (bio);else if (bio->bi_opf &REQ_RAHEAD )
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 68/285 drm/amdkfd: make CRAT table missing message informational only
In reply to Greg Kroah-HartmanFrom: Alex Deucher <[email protected]>
[ Upstream commit 9dff13f9edf755a15f6507874185a3290c1ae8bb ]
The driver has a fallback so make the message informational rather than a warning. The driver has a fallback if the Component Resource Association Table (CRAT) is missing, so make this informational now.
--- drivers/gpu/drm/amd/amdkfd/kfd_crat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdkfd/kfd_crat.c +1 -1
@@ -1563,7 +1563,7 @@ int kfd_create_crat_image_acpi(void **crat_image, size_t *size)/* Fetch the CRAT table from ACPI */ status =acpi_get_table (CRAT_SIGNATURE ,0 , &crat_table);if (status ==AE_NOT_FOUND ) { -pr_warn ("CRAT table not found\n" ); +pr_info ("CRAT table not found\n" );return -ENODATA ; }else if (ACPI_FAILURE (status)) {const char *err =acpi_format_exception (status);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 69/285 vfio/pci: Stub vfio_pci_vga_rw when !CONFIG_VFIO_PCI_VGA
In reply to Greg Kroah-HartmanFrom: Alex Williamson <[email protected]>
[ Upstream commit 6e031ec0e5a2dda53e12e0d2a7e9b15b47a3c502 ]
Resolve build errors reported against UML build for undefined ioport_map() and ioport_unmap() functions. Without this config option a device cannot have vfio_pci_core_device.has_vga set, so the existing function would always return -EINVAL anyway.
--- drivers/vfio/pci/vfio_pci_rdwr.c | 2 ++ include/linux/vfio_pci_core.h | 9 +++++++++ 2 files changed, 11 insertions(+)
drivers/vfio/pci/vfio_pci_rdwr.c +2 -0
@@ -288,6 +288,7 @@ ssize_t vfio_pci_bar_rw(struct vfio_pci_core_device *vdev, char __user *buf,return done; } +#ifdef CONFIG_VFIO_PCI_VGA ssize_t vfio_pci_vga_rw (struct vfio_pci_core_device *vdev,char __user *buf,size_t count,loff_t *ppos,bool iswrite) {
@@ -355,6 +356,7 @@ ssize_t vfio_pci_vga_rw(struct vfio_pci_core_device *vdev, char __user *buf, return done; } +#endif static void vfio_pci_ioeventfd_do_write (struct vfio_pci_ioeventfd *ioeventfd,bool test_mem)
include/linux/vfio_pci_core.h +9 -0
@@ -159,8 +159,17 @@ extern ssize_t vfio_pci_config_rw(struct vfio_pci_core_device *vdev,extern ssize_t vfio_pci_bar_rw (struct vfio_pci_core_device *vdev,char __user *buf,size_t count,loff_t *ppos,bool iswrite); +#ifdef CONFIG_VFIO_PCI_VGA extern ssize_t vfio_pci_vga_rw (struct vfio_pci_core_device *vdev,char __user *buf,size_t count,loff_t *ppos,bool iswrite); +#else +static inline ssize_t vfio_pci_vga_rw (struct vfio_pci_core_device *vdev, +char __user *buf,size_t count, +loff_t *ppos,bool iswrite) +{ +return -EINVAL ; +} +#endif extern long vfio_pci_ioeventfd (struct vfio_pci_core_device *vdev,loff_t offset,uint64_t data,int count,int fd);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 70/285 scsi: pm8001: Fix pm80xx_pci_mem_copy() interface
In reply to Greg Kroah-HartmanFrom: Damien Le Moal <[email protected]>
[ Upstream commit 3762d8f6edcdb03994c919f9487fd6d336c06561 ]
The declaration of the local variable destination1 in pm80xx_pci_mem_copy() as a pointer to a u32 results in the sparse warning:
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype]
got restricted __le32 [usertype]
Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly declared with the const attribute.
Fix both problems by changing the type of the "destination" argument to "__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy() function, thus removing the need for the destination1 local variable.
--- drivers/scsi/pm8001/pm80xx_hwi.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +3 -5
@@ -66,18 +66,16 @@ int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value) }static void pm80xx_pci_mem_copy (struct pm8001_hba_info *pm8001_ha,u32 soffset, -const void *destination, +__le32 *destination,u32 dw_count,u32 bus_base_number) {u32 index, value, offset; -u32 *destination1; - destination1 = (u32 *)destination; -for (index =0 ; index < dw_count; index +=4 , destination1++) { +for (index =0 ; index < dw_count; index +=4 , destination++) { offset = (soffset + index);if (offset < (64 *1024 )) { value =pm8001_cr32 (pm8001_ha, bus_base_number, offset); - *destination1 =cpu_to_le32 (value); + *destination =cpu_to_le32 (value); } }return ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 71/285 scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
In reply to Greg Kroah-HartmanFrom: Damien Le Moal <[email protected]>
[ Upstream commit 7e6b7e740addcea450041b5be8e42f0a4ceece0f ]
The call to pm8001_ccb_task_free() at the end of pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.
--- drivers/scsi/pm8001/pm8001_hwi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +3 -4
@@ -3717,12 +3717,11 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)mb ();if (pm8001_dev->id &NCQ_ABORT_ALL_FLAG ) { -pm8001_tag_free (pm8001_ha, tag);sas_free_task (t); -/* clear the flag */ - pm8001_dev->id &=0xBFFFFFFF ; - }else + pm8001_dev->id &= ~NCQ_ABORT_ALL_FLAG ; + }else { t->task_done (t); + }return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 72/285 scsi: pm8001: Fix task leak in pm8001_send_abort_all()
In reply to Greg Kroah-HartmanFrom: Damien Le Moal <[email protected]>
[ Upstream commit f90a74892f3acf0cdec5844e90fc8686ca13e7d7 ]
In pm8001_send_abort_all(), make sure to free the allocated sas task if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.
--- drivers/scsi/pm8001/pm8001_hwi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +6 -3
@@ -1767,7 +1767,6 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha, } task =sas_alloc_slow_task (GFP_ATOMIC ); -if (!task) {pm8001_dbg (pm8001_ha,FAIL ,"cannot allocate task\n" );return ;
@@ -1776,8 +1775,10 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha, task->task_done = pm8001_task_done; res =pm8001_tag_alloc (pm8001_ha, &ccb_tag); -if (res) +if (res) { +sas_free_task (task);return ; + } ccb = &pm8001_ha->ccb_info[ccb_tag]; ccb->device = pm8001_ha_dev;
@@ -1794,8 +1795,10 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha, ret =pm8001_mpi_build_cmd (pm8001_ha, circularQ, opc, &task_abort,sizeof (task_abort),0 ); -if (ret) +if (ret) { +sas_free_task (task);pm8001_tag_free (pm8001_ha, ccb_tag); + } }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 73/285 scsi: pm8001: Fix tag leaks on error
In reply to Greg Kroah-HartmanFrom: Damien Le Moal <[email protected]>
[ Upstream commit 4c8f04b1905cd4b776d0b720463c091545478ef7 ]
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails.
Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free().
--- drivers/scsi/pm8001/pm8001_hwi.c | 9 +++++++++ drivers/scsi/pm8001/pm8001_sas.c | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 9 +++++++-- 3 files changed, 17 insertions(+), 3 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +9 -0
@@ -4492,6 +4492,9 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, SAS_ADDR_SIZE); rc =pm8001_mpi_build_cmd (pm8001_ha, circularQ, opc, &payload,sizeof (payload),0 ); +if (rc) +pm8001_tag_free (pm8001_ha, tag); +return rc; }
@@ -4904,6 +4907,9 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha, ccb->ccb_tag = tag; rc =pm8001_chip_fw_flash_update_build (pm8001_ha, &flash_update_info, tag); +if (rc) +pm8001_tag_free (pm8001_ha, tag); +return rc; }
@@ -5008,6 +5014,9 @@ pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha, payload.nds =cpu_to_le32 (state); rc =pm8001_mpi_build_cmd (pm8001_ha, circularQ, opc, &payload,sizeof (payload),0 ); +if (rc) +pm8001_tag_free (pm8001_ha, tag); +return rc; }
drivers/scsi/pm8001/pm8001_sas.c +1 -1
@@ -831,10 +831,10 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, res =PM8001_CHIP_DISP ->task_abort (pm8001_ha, pm8001_dev, flag, task_tag, ccb_tag); -if (res) {del_timer (&task->slow_task->timer);pm8001_dbg (pm8001_ha,FAIL ,"Executing internal task failed\n" ); +pm8001_tag_free (pm8001_ha, ccb_tag); goto ex_err; }wait_for_completion (&task->slow_task->completion);
drivers/scsi/pm8001/pm80xx_hwi.c +7 -2
@@ -4928,8 +4928,13 @@ static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, payload.tag =cpu_to_le32 (tag); payload.phyop_phyid =cpu_to_le32 (((phy_op &0xFF ) <<8 ) | (phyId &0xFF )); -return pm8001_mpi_build_cmd (pm8001_ha, circularQ, opc, &payload, -sizeof (payload),0 ); + + rc =pm8001_mpi_build_cmd (pm8001_ha, circularQ, opc, &payload, +sizeof (payload),0 ); +if (rc) +pm8001_tag_free (pm8001_ha, tag); + +return rc; }static u32 pm80xx_chip_is_our_interrupt (struct pm8001_hba_info *pm8001_ha)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 74/285 scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()
In reply to Greg Kroah-HartmanFrom: Damien Le Moal <[email protected]>
[ Upstream commit f792a3629f4c4aa4c3703d66b43ce1edcc3ec09a ]
In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed.
--- drivers/scsi/pm8001/pm8001_hwi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/pm8001/pm8001_hwi.c +3 -1
@@ -4907,8 +4907,10 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha, ccb->ccb_tag = tag; rc =pm8001_chip_fw_flash_update_build (pm8001_ha, &flash_update_info, tag); -if (rc) +if (rc) { +kfree (fw_control_context);pm8001_tag_free (pm8001_ha, tag); + }return rc; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 75/285 mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
In reply to Greg Kroah-HartmanFrom: Johan Almbladh <[email protected]>
[ Upstream commit 28225a6ef80ebf46c46e5fbd5b1ee231a0b2b5b7 ]
Before, the hardware would be allowed to transmit injected 802.11 MPDUs as A-MSDU. This resulted in corrupted frames being transmitted. Now, injected MPDUs are transmitted as-is, without A-MSDU.
The fix was verified with frame injection on MT7915 hardware, both with and without the injected frame being encrypted.
If the hardware cannot do A-MSDU aggregation on MPDUs, this problem would also be present in the TX path where mac80211 does the 802.11 encapsulation. However, I have not observed any such problem when disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode. Therefore this fix is isolated to injected frames only.
The same A-MSDU logic is also present in the mt7921 driver, so it is likely that this fix should be applied there too. I do not have access to mt7921 hardware so I have not been able to test that.
--- drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/wireless/mediatek/mt76/mt7915/mac.c +1 -0
@@ -982,6 +982,7 @@ mt7915_mac_write_txwi_80211(struct mt7915_dev *dev, __le32 *txwi, val =MT_TXD3_SN_VALID |FIELD_PREP (MT_TXD3_SEQ ,IEEE80211_SEQ_TO_SN (seqno)); txwi[3 ] |=cpu_to_le32 (val); + txwi[7 ] &= ~cpu_to_le32 (MT_TXD7_HW_AMSDU ); } val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 76/285 powerpc/64s/hash: Make hash faults work in NMI context
In reply to Greg Kroah-HartmanFrom: Nicholas Piggin <[email protected]>
[ Upstream commit 8b91cee5eadd2021f55e6775f2d50bd56d00c217 ]
Hash faults are not resoved in NMI context, instead causing the access to fail. This is done because perf interrupts can get backtraces including walking the user stack, and taking a hash fault on those could deadlock on the HPTE lock if the perf interrupt hits while the same HPTE lock is being held by the hash fault code. The user-access for the stack walking will notice the access failed and deal with that in the perf code.
The reason to allow perf interrupts in is to better profile hash faults.
The problem with this is any hash fault on a kernel access that happens in NMI context will crash, because kernel accesses must not fail.
Hard lockups, system reset, machine checks that access vmalloc space including modules and including stack backtracing and symbol lookup in modules, per-cpu data, etc could all run into this problem.
Fix this by disallowing perf interrupts in the hash fault code (the direct hash fault is covered by MSR[EE]=0 so the PMI disable just needs to extend to the preload case). This simplifies the tricky logic in hash faults and perf, at the cost of reduced profiling of hash faults.
perf can still latch addresses when interrupts are disabled, it just won't get the stack trace at that point, so it would still find hot spots, just sometimes with confusing stack chains.
An alternative could be to allow perf interrupts here but always do the slowpath stack walk if we are in nmi context, but that slows down all perf interrupt stack walking on hash though and it does not remove as much tricky code.
--- arch/powerpc/include/asm/interrupt.h | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 54 ++++----------------------- arch/powerpc/perf/callchain.h | 9 +---- arch/powerpc/perf/callchain_64.c | 27 -------------- 4 files changed, 10 insertions(+), 82 deletions(-)
arch/powerpc/include/asm/interrupt.h +1 -1
@@ -567,7 +567,7 @@ DECLARE_INTERRUPT_HANDLER_RAW(do_slb_fault);DECLARE_INTERRUPT_HANDLER (do_bad_slb_fault);/* hash_utils.c */ -DECLARE_INTERRUPT_HANDLER_RAW (do_hash_fault); +DECLARE_INTERRUPT_HANDLER (do_hash_fault);/* fault.c */ DECLARE_INTERRUPT_HANDLER (do_page_fault);
arch/powerpc/mm/book3s64/hash_utils.c +8 -46
84 lines not on this page · raw message
arch/powerpc/perf/callchain.h +1 -8
@@ -2,7 +2,6 @@#ifndef _POWERPC_PERF_CALLCHAIN_H#define _POWERPC_PERF_CALLCHAIN_H -int read_user_stack_slow (const void __user *ptr,void *buf,int nb);void perf_callchain_user_64 (struct perf_callchain_entry_ctx *entry,struct pt_regs *regs); void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
@@ -26,17 +25,11 @@ static inline int __read_user_stack(const void __user *ptr, void *ret, size_t size) {unsigned long addr = (unsigned long )ptr; -int rc;if (addr >TASK_SIZE - size || (addr & (size -1 )))return -EFAULT ; - rc =copy_from_user_nofault (ret, ptr, size); - -if (IS_ENABLED (CONFIG_PPC64 ) && !radix_enabled () && rc) -return read_user_stack_slow (ptr, ret, size); - -return rc; +return copy_from_user_nofault (ret, ptr, size); }#endif /* _POWERPC_PERF_CALLCHAIN_H */
arch/powerpc/perf/callchain_64.c +0 -27
@@ -18,33 +18,6 @@#include "callchain.h" -/* -* On 64-bit we don't want to invoke hash_page on user addresses from -* interrupt context, so if the access faults, we read the page tables -* to find which page (if any) is mapped and access it directly. Radix -* has no need for this so it doesn't use read_user_stack_slow. -*/ -int read_user_stack_slow (const void __user *ptr,void *buf,int nb) -{ - -unsigned long addr = (unsigned long ) ptr; -unsigned long offset; -struct page *page; -void *kaddr; - -if (get_user_page_fast_only (addr,FOLL_WRITE , &page)) { - kaddr =page_address (page); - -/* align address to page boundary */ - offset = addr & ~PAGE_MASK ; - -memcpy (buf, kaddr + offset, nb); -put_page (page); -return 0 ; - } -return -EFAULT ; -} -static int read_user_stack_64 (const unsigned long __user *ptr,unsigned long *ret) {return __read_user_stack (ptr, ret,sizeof (*ret));
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 77/285 mt76: mt7615: Fix assigning negative values to unsigned variable
In reply to Greg Kroah-HartmanFrom: Yang Li <[email protected]>
[ Upstream commit 9273ffcc9a11942bd586bb42584337ef3962b692 ]
Smatch reports the following:drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-110) to unsigned variable 'def_th' drivers/net/wireless/mediatek/mt76/mt7615/mac.c:1865 mt7615_mac_adjust_sensitivity() warn: assigning (-98) to unsigned variable 'def_th'
--- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7615/mac.c +1 -1
@@ -1732,7 +1732,7 @@ mt7615_mac_adjust_sensitivity(struct mt7615_phy *phy,struct mt7615_dev *dev = phy->dev;int false_cca = ofdm ? phy->false_cca_ofdm : phy->false_cca_cck;bool ext_phy = phy != &dev->phy; -u16 def_th = ofdm ?-98 :-110 ; +s16 def_th = ofdm ?-98 :-110 ;bool update = false;s8 *sensitivity;int signal;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 78/285 scsi: aha152x: Fix aha152x_setup() __setup handler return value
In reply to Greg Kroah-HartmanFrom: Randy Dunlap <[email protected]>
[ Upstream commit cc8294ec4738d25e2bb2d71f7d82a9bf7f4a157b ]
__setup() handlers should return 1 if the command line option is handled and 0 if not (or maybe never return 0; doing so just pollutes init's environment with strings that are not init arguments/parameters).
Return 1 from aha152x_setup() to indicate that the boot option has been handled.
--- drivers/scsi/aha152x.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/scsi/aha152x.c +2 -4
@@ -3375,13 +3375,11 @@ static int __init aha152x_setup(char *str) setup[setup_count].synchronous = ints[0 ] >=6 ? ints[6 ] :1 ; setup[setup_count].delay = ints[0 ] >=7 ? ints[7 ] :DELAY_DEFAULT ; setup[setup_count].ext_trans = ints[0 ] >=8 ? ints[8 ] :0 ; -if (ints[0 ] >8 ) {/*}*/ +if (ints[0 ] >8 )printk (KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>" "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>]]]]]]]\n" ); - }else { +else setup_count++; -return 0 ; - }return 1 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 79/285 scsi: hisi_sas: Free irq vectors in order for v3 HW
In reply to Greg Kroah-HartmanFrom: Qi Liu <[email protected]>
[ Upstream commit 554fb72ee34f4732c7f694f56c3c6e67790352a0 ]
If the driver probe fails to request the channel IRQ or fatal IRQ, the driver will free the IRQ vectors before freeing the IRQs in free_irq(), and this will cause a kernel BUG like this:
------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:369! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: free_msi_irqs+0x118/0x13c pci_disable_msi+0xfc/0x120 pci_free_irq_vectors+0x24/0x3c hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw] local_pci_probe+0x44/0xb0 work_for_cpu_fn+0x20/0x34 process_one_work+0x1d0/0x340 worker_thread+0x2e0/0x460 kthread+0x180/0x190 ret_from_fork+0x10/0x20 ---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the vectors.
--- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +11 -5
@@ -2390,17 +2390,25 @@ static irqreturn_t cq_interrupt_v3_hw(int irq_no, void *p)return IRQ_WAKE_THREAD ; } +static void hisi_sas_v3_free_vectors (void *data) +{ +struct pci_dev *pdev = data; + +pci_free_irq_vectors (pdev); +} +static int interrupt_preinit_v3_hw (struct hisi_hba *hisi_hba) {int vectors;int max_msi =HISI_SAS_MSI_COUNT_V3_HW , min_msi;struct Scsi_Host *shost = hisi_hba->shost; +struct pci_dev *pdev = hisi_hba->pci_dev;struct irq_affinity desc = { .pre_vectors =BASE_VECTORS_V3_HW , }; min_msi =MIN_AFFINE_VECTORS_V3_HW ; - vectors = pci_alloc_irq_vectors_affinity(hisi_hba->pci_dev, + vectors = pci_alloc_irq_vectors_affinity(pdev, min_msi, max_msi, PCI_IRQ_MSI | PCI_IRQ_AFFINITY,
@@ -2412,6 +2420,7 @@ static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba) hisi_hba->cq_nvecs = vectors -BASE_VECTORS_V3_HW ; shost->nr_hw_queues = hisi_hba->cq_nvecs; +devm_add_action (&pdev->dev, hisi_sas_v3_free_vectors, pdev);return 0 ; }
@@ -4763,7 +4772,7 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id) rc =scsi_add_host (shost, dev);if (rc) - goto err_out_free_irq_vectors; + goto err_out_debugfs; rc =sas_register_ha (sha);if (rc)
@@ -4792,8 +4801,6 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)sas_unregister_ha (sha); err_out_register_ha:scsi_remove_host (shost); -err_out_free_irq_vectors: -pci_free_irq_vectors (pdev); err_out_debugfs:debugfs_exit_v3_hw (hisi_hba); err_out_ha:
@@ -4817,7 +4824,6 @@ hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)devm_free_irq (&pdev->dev,pci_irq_vector (pdev, nr), cq); } -pci_free_irq_vectors (pdev); }static void hisi_sas_v3_remove (struct pci_dev *pdev)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 80/285 scsi: hisi_sas: Limit users changing debugfs BIST count value
In reply to Greg Kroah-HartmanFrom: Xiang Chen <[email protected]>
[ Upstream commit 286ce4c65fbdf5eb9d4d5f4e4997c4e32bf1b073 ]
Add a file operation for "cnt" file under bist directory, so users can only read "cnt" or clear "cnt" to zero, but cannot randomly modify.
--- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 52 +++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 2 deletions(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +50 -2
@@ -3968,6 +3968,54 @@ static const struct file_operations debugfs_bist_phy_v3_hw_fops = { .owner = THIS_MODULE, }; +static ssize_t debugfs_bist_cnt_v3_hw_write (struct file *filp, +const char __user *buf, +size_t count,loff_t *ppos) +{ +struct seq_file *m = filp->private_data; +struct hisi_hba *hisi_hba = m->private; +unsigned int cnt; +int val; + +if (hisi_hba->debugfs_bist_enable) +return -EPERM ; + + val =kstrtouint_from_user (buf, count,0 , &cnt); +if (val) +return val; + +if (cnt) +return -EINVAL ; + + hisi_hba->debugfs_bist_cnt =0 ; +return count; +} + +static int debugfs_bist_cnt_v3_hw_show (struct seq_file *s,void *p) +{ +struct hisi_hba *hisi_hba = s->private; + +seq_printf (s,"%u\n" , hisi_hba->debugfs_bist_cnt); + +return 0 ; +} + +static int debugfs_bist_cnt_v3_hw_open (struct inode *inode, +struct file *filp) +{ +return single_open (filp, debugfs_bist_cnt_v3_hw_show, + inode->i_private); +} + +static const struct file_operations debugfs_bist_cnt_v3_hw_ops = { + .open = debugfs_bist_cnt_v3_hw_open, + .read = seq_read, + .write = debugfs_bist_cnt_v3_hw_write, + .llseek = seq_lseek, + .release = single_release, + .owner =THIS_MODULE , +}; + static const struct { int value; char *name;
@@ -4605,8 +4653,8 @@ static void debugfs_bist_init_v3_hw(struct hisi_hba *hisi_hba)debugfs_create_file ("phy_id" ,0600 , hisi_hba->debugfs_bist_dentry, hisi_hba, &debugfs_bist_phy_v3_hw_fops); -debugfs_create_u32 ("cnt" ,0600 , hisi_hba->debugfs_bist_dentry, - &hisi_hba->debugfs_bist_cnt); +debugfs_create_file ("cnt" ,0600 , hisi_hba->debugfs_bist_dentry, + hisi_hba, &debugfs_bist_cnt_v3_hw_ops); debugfs_create_file("loopback_mode", 0600, hisi_hba->debugfs_bist_dentry,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 81/285 net/smc: correct settings of RMB window update limit
In reply to Greg Kroah-HartmanFrom: Dust Li <[email protected]>
[ Upstream commit 6bf536eb5c8ca011d1ff57b5c5f7c57ceac06a37 ]
rmbe_update_limit is used to limit announcing receive window updating too frequently. RFC7609 request a minimal increase in the window size of 10% of the receive buffer space. But current implementation used:
min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)
and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost always less then 10% of the receive buffer space.
This causes the receiver always sending CDC message to update its consumer cursor when it consumes more then 2K of data. And as a result, we may encounter something like "TCP silly window syndrome" when sending 2.5~8K message.
This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).
With this patch and SMC autocorking enabled, qperf 2K/4K/8K tcp_bw test shows 45%/75%/40% increase in throughput respectively.
--- net/smc/smc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/smc/smc_core.c +1 -1
@@ -1904,7 +1904,7 @@ static struct smc_buf_desc *smc_buf_get_slot(int compressed_bufsize,*/ static inline int smc_rmb_wnd_update_limit (int rmbe_size) { -return min_t (int, rmbe_size /10 ,SOCK_MIN_SNDBUF /2 ); +return max_t (int, rmbe_size /10 ,SOCK_MIN_SNDBUF /2 ); }/* map an rmb buf to a link */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 82/285 mips: ralink: fix a refcount leak in ill_acc_of_setup()
In reply to Greg Kroah-HartmanFrom: Hangyu Hua <[email protected]>
[ Upstream commit 4a0a1436053b17e50b7c88858fb0824326641793 ]
of_node_put(np) needs to be called when pdev == NULL.
--- arch/mips/ralink/ill_acc.c | 1 + 1 file changed, 1 insertion(+)
arch/mips/ralink/ill_acc.c +1 -0
@@ -61,6 +61,7 @@ static int __init ill_acc_of_setup(void) pdev =of_find_device_by_node (np);if (!pdev) {pr_err ("%pOFn: failed to lookup pdev\n" , np); +of_node_put (np);return -EINVAL ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 83/285 macvtap: advertise link netns via netlink
In reply to Greg Kroah-HartmanFrom: Sven Eckelmann <[email protected]>
[ Upstream commit a02192151b7dbf855084c38dca380d77c7658353 ]
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. This fixes iproute2 which otherwise resolved the link interface to an interface in the wrong namespace.
Test commands:
ip netns add nst
ip link add dummy0 type dummy
ip link add link macvtap0 link dummy0 type macvtap ip link set macvtap0 netns nst
ip -netns nst link show macvtap0
Before:
10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff
After:
10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0
--- drivers/net/macvtap.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/macvtap.c +6 -0
@@ -133,11 +133,17 @@ static void macvtap_setup(struct net_device *dev) dev->tx_queue_len =TUN_READQ_SIZE ; } +static struct net *macvtap_link_net (const struct net_device *dev) +{ +return dev_net (macvlan_dev_real_dev (dev)); +} +static struct rtnl_link_ops macvtap_link_ops__read_mostly = { .kind ="macvtap" , .setup = macvtap_setup, .newlink = macvtap_newlink, .dellink = macvtap_dellink, + .get_link_net = macvtap_link_net, .priv_size =sizeof (struct macvtap_dev ), };
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 84/285 tuntap: add sanity checks about msg_controllen in sendmsg
In reply to Greg Kroah-HartmanFrom: Harold Huang <[email protected]>
[ Upstream commit 74a335a07a17d131b9263bfdbdcb5e40673ca9ca ]
In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to tun_sendmsg. Although we donot use msg_controllen in this path, we should check msg_controllen to make sure the caller pass a valid msg_ctl.
--- drivers/net/tap.c | 3 ++- drivers/net/tun.c | 3 ++- drivers/vhost/net.c | 1 + 3 files changed, 5 insertions(+), 2 deletions(-)
drivers/net/tap.c +2 -1
@@ -1198,7 +1198,8 @@ static int tap_sendmsg(struct socket *sock, struct msghdr *m,struct xdp_buff *xdp;int i; -if (ctl && (ctl->type ==TUN_MSG_PTR )) { +if (m->msg_controllen ==sizeof (struct tun_msg_ctl ) && + ctl && ctl->type ==TUN_MSG_PTR ) {for (i =0 ; i < ctl->num; i++) { xdp = &((struct xdp_buff *)ctl->ptr)[i];tap_get_user_xdp (q, xdp);
drivers/net/tun.c +2 -1
@@ -2489,7 +2489,8 @@ static int tun_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)if (!tun)return -EBADFD ; -if (ctl && (ctl->type ==TUN_MSG_PTR )) { +if (m->msg_controllen ==sizeof (struct tun_msg_ctl ) && + ctl && ctl->type ==TUN_MSG_PTR ) {struct tun_page tpage;int n = ctl->num;int flush =0 ;
drivers/vhost/net.c +1 -0
@@ -473,6 +473,7 @@ static void vhost_tx_batch(struct vhost_net *net, goto signal_used; msghdr->msg_control = &ctl; + msghdr->msg_controllen =sizeof (ctl); err = sock->ops->sendmsg (sock, msghdr,0 );if (unlikely (err <0 )) {vq_err (&nvq->vq,"Fail to batch sending packets\n" );
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 85/285 Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}
In reply to Greg Kroah-HartmanFrom: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit 9b392e0e0b6d026da5a62bb79a08f32e27af858e ]
This fixes attemting to print hdev->name directly which causes them to print an error:
kernel: read_version:367: (efault): sock 000000006a3008f2
--- include/net/bluetooth/bluetooth.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
include/net/bluetooth/bluetooth.h +8 -6
@@ -204,19 +204,21 @@ void bt_err_ratelimited(const char *fmt, ...);#define BT_DBG (fmt, ...) pr_debug(fmt "\n", ##__VA_ARGS__)#endif +#define bt_dev_name (hdev) ((hdev) ? (hdev)->name : "null") +#define bt_dev_info (hdev, fmt, ...) \ - BT_INFO("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_INFO("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)#define bt_dev_warn (hdev, fmt, ...) \ - BT_WARN("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_WARN("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)#define bt_dev_err (hdev, fmt, ...) \ - BT_ERR("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_ERR("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)#define bt_dev_dbg (hdev, fmt, ...) \ - BT_DBG("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + BT_DBG("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)#define bt_dev_warn_ratelimited (hdev, fmt, ...) \ - bt_warn_ratelimited("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + bt_warn_ratelimited("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)#define bt_dev_err_ratelimited (hdev, fmt, ...) \ - bt_err_ratelimited("%s: " fmt, (hdev)->name, ##__VA_ARGS__) + bt_err_ratelimited("%s: " fmt, bt_dev_name(hdev), ##__VA_ARGS__)/* Connection and socket states */ enum {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 86/285 Bluetooth: use memset avoid memory leaks
In reply to Greg Kroah-HartmanFrom: Minghao Chi (CGEL ZTE) <[email protected]>
[ Upstream commit d3715b2333e9a21692ba16ef8645eda584a9515d ]
Use memset to initialize structs to prevent memory leaks in l2cap_ecred_connect
--- net/bluetooth/l2cap_core.c | 1 + 1 file changed, 1 insertion(+)
net/bluetooth/l2cap_core.c +1 -0
@@ -1436,6 +1436,7 @@ static void l2cap_ecred_connect(struct l2cap_chan *chan)l2cap_ecred_init (chan,0 ); +memset (&data,0 ,sizeof (data)); data.pdu.req.psm = chan->psm; data.pdu.req.mtu =cpu_to_le16 (chan->imtu); data.pdu.req.mps =cpu_to_le16 (chan->mps);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 87/285 bnxt_en: Eliminate unintended link toggle during FW reset
In reply to Greg Kroah-HartmanFrom: Michael Chan <[email protected]>
[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ]
If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds.
The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl.
--- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +1 -3
@@ -2076,9 +2076,7 @@ static int bnxt_set_pauseparam(struct net_device *dev, } link_info->autoneg |=BNXT_AUTONEG_FLOW_CTRL ; -if (bp->hwrm_spec_code >=0x10201 ) - link_info->req_flow_ctrl = -PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE ; + link_info->req_flow_ctrl =0 ; }else {/* when transition from auto pause to force pause, * force a link change
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 88/285 PCI: endpoint: Fix misused goto label
In reply to Greg Kroah-HartmanFrom: Li Chen <[email protected]>
[ Upstream commit bf8d87c076f55b8b4dfdb6bc6c6b6dc0c2ccb487 ]
Fix a misused goto label jump since that can result in a memory leak.
--- drivers/pci/endpoint/functions/pci-epf-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/endpoint/functions/pci-epf-test.c +1 -1
@@ -451,7 +451,7 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)if (!epf_test->dma_supported) {dev_err (dev,"Cannot transfer data using DMA\n" ); ret = -EINVAL ; - goto err_map_addr; + goto err_dma_map; } src_phys_addr = dma_map_single(dma_dev, buf, reg->size,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 89/285 MIPS: fix fortify panic when copying asm exception handlers
In reply to Greg Kroah-HartmanFrom: Alexander Lobakin <[email protected]>
[ Upstream commit d17b66417308996e7e64b270a3c7f3c1fbd4cfc8 ]
With KCFLAGS="-O3", I was able to trigger a fortify-source memcpy() overflow panic on set_vi_srs_handler(). Although O3 level is not supported in the mainline, under some conditions that may've happened with any optimization settings, it's just a matter of inlining luck. The panic itself is correct, more precisely, 50/50 false-positive and not at the same time.
Quoted 1 line
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the memory.
But the reason behind is that C code refers to that exception handler declares it as char, i.e. something of 1 byte length. It's obvious that the asm function itself is way more than 1 byte, so fortify logics thought we are going to past the symbol declared. The standard way to refer to asm symbols from C code which is not supposed to be called from C is to declare them as extern const u8[]. This is fully correct from any point of view, as any code itself is just a bunch of bytes (including 0 as it is for syms like _stext/_etext/etc.), and the exact size is not known at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables. Make set_handler() take const as a second argument to avoid cast-away warnings and give a little more room for optimization.
--- arch/mips/include/asm/setup.h | 2 +- arch/mips/kernel/traps.c | 22 +++++++++++----------- 2 files changed, 12 insertions(+), 12 deletions(-)
arch/mips/include/asm/setup.h +1 -1
@@ -16,7 +16,7 @@ static inline void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift, unsigned int timeout) {}#endif -extern void set_handler (unsigned long offset,void *addr,unsigned long len); +void set_handler (unsigned long offset,const void *addr,unsigned long len);extern void set_uncached_handler (unsigned long offset,void *addr,unsigned long len);typedef void (*vi_handler_t )(void );
arch/mips/kernel/traps.c +11 -11
@@ -2091,19 +2091,19 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)* If no shadow set is selected then use the default handler * that does normal register saving and standard interrupt exit */ -extern char except_vec_vi, except_vec_vi_lui; -extern char except_vec_vi_ori, except_vec_vi_end; -extern char rollback_except_vec_vi; -char *vec_start =using_rollback_handler () ? - &rollback_except_vec_vi : &except_vec_vi; +extern const u8 except_vec_vi[], except_vec_vi_lui[]; +extern const u8 except_vec_vi_ori[], except_vec_vi_end[]; +extern const u8 rollback_except_vec_vi[]; +const u8 *vec_start =using_rollback_handler () ? + rollback_except_vec_vi : except_vec_vi;#if defined(CONFIG_CPU_MICROMIPS ) || defined(CONFIG_CPU_BIG_ENDIAN ) -const int lui_offset = &except_vec_vi_lui - vec_start +2 ; -const int ori_offset = &except_vec_vi_ori - vec_start +2 ; +const int lui_offset = except_vec_vi_lui - vec_start +2 ; +const int ori_offset = except_vec_vi_ori - vec_start +2 ;#else -const int lui_offset = &except_vec_vi_lui - vec_start; -const int ori_offset = &except_vec_vi_ori - vec_start; +const int lui_offset = except_vec_vi_lui - vec_start; +const int ori_offset = except_vec_vi_ori - vec_start;#endif -const int handler_len = &except_vec_vi_end - vec_start; +const int handler_len = except_vec_vi_end - vec_start;if (handler_len >VECTORSPACING ) {/*
@@ -2311,7 +2311,7 @@ void per_cpu_trap_init(bool is_boot_cpu) }/* Install CPU exception handler */ -void set_handler (unsigned long offset,void *addr,unsigned long size) +void set_handler (unsigned long offset,const void *addr,unsigned long size) {#ifdef CONFIG_CPU_MICROMIPS memcpy ((void *)(ebase + offset), ((unsigned char *)addr -1 ), size);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 90/285 powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
In reply to Greg Kroah-HartmanFrom: Michael Ellerman <[email protected]>
[ Upstream commit 1a76e520ee1831a81dabf8a9a58c6453f700026e ]
Since the IBM A2 CPU support was removed, see commit fb5a515704d7 ("powerpc: Remove platforms/wsp and associated pieces"), the only 64-bit Book3E CPUs we support are Freescale (NXP) ones.
However our Kconfig still allows configurating a kernel that has 64-bit Book3E support, but no Freescale CPU support enabled. Such a kernel would never boot, it doesn't know about any CPUs.
It also causes build errors, as reported by lkp, because PPC_BARRIER_NOSPEC is not enabled in such a configuration:
powerpc64-linux-ld: arch/powerpc/net/bpf_jit_comp64.o:(.toc+0x0):
undefined reference to `powerpc_security_features'
To fix this, force PPC_FSL_BOOK3E to be selected whenever we are building a 64-bit Book3E kernel.
--- arch/powerpc/platforms/Kconfig.cputype | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/powerpc/platforms/Kconfig.cputype +2 -1
@@ -111,6 +111,7 @@ config PPC_BOOK3S_64 config PPC_BOOK3E_64 bool "Embedded processors" + select PPC_FSL_BOOK3E select PPC_FPU # Make it a choice ? select PPC_SMP_MUXED_IPI select PPC_DOORBELL
@@ -287,7 +288,7 @@ config FSL_BOOKE config PPC_FSL_BOOK3E bool select ARCH_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64 - select FSL_EMB_PERFMON + imply FSL_EMB_PERFMON select PPC_SMP_MUXED_IPI select PPC_DOORBELL default y if FSL_BOOKE
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 91/285 powerpc/secvar: fix refcount leak in format_show()
In reply to Greg Kroah-HartmanFrom: Hangyu Hua <[email protected]>
[ Upstream commit d601fd24e6964967f115f036a840f4f28488f63f ]
Refcount leak will happen when format_show returns failure in multiple cases. Unified management of of_node_put can fix this problem.
--- arch/powerpc/kernel/secvar-sysfs.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
arch/powerpc/kernel/secvar-sysfs.c +6 -3
@@ -26,15 +26,18 @@ static ssize_t format_show(struct kobject *kobj, struct kobj_attribute *attr,const char *format; node =of_find_compatible_node (NULL ,NULL ,"ibm,secvar-backend" ); -if (!of_device_is_available (node)) -return -ENODEV ; +if (!of_device_is_available (node)) { + rc = -ENODEV ; + goto out; + } rc =of_property_read_string (node,"format" , &format);if (rc) -return rc; + goto out; rc =sprintf (buf,"%s\n" , format); +out:of_node_put (node);return rc;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 92/285 scsi: libfc: Fix use after free in fc_exch_abts_resp()
In reply to Greg Kroah-HartmanFrom: Jianglei Nie <[email protected]>
[ Upstream commit 271add11994ba1a334859069367e04d2be2ebdd4 ]
fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free.
Return after the fc_exch_release() call to avoid use after free.
--- drivers/scsi/libfc/fc_exch.c | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/libfc/fc_exch.c +1 -0
@@ -1701,6 +1701,7 @@ static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp)if (cancel_delayed_work_sync (&ep->timeout_work)) {FC_EXCH_DBG (ep,"Exchange timer canceled due to ABTS response\n" );fc_exch_release (ep);/* release from pending timer hold */ +return ; }spin_lock_bh (&ep->ex_lock);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 93/285 can: isotp: set default value for N_As to 50 micro seconds
In reply to Greg Kroah-HartmanFrom: Oliver Hartkopp <[email protected]>
[ Upstream commit 530e0d46c61314c59ecfdb8d3bcb87edbc0f85d3 ]
The N_As value describes the time a CAN frame needs on the wire when transmitted by the CAN controller. Even very short CAN FD frames need arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).
Having N_As to be zero (the former default) leads to 'no CAN frame separation' when STmin is set to zero by the receiving node. This 'burst mode' should not be enabled by default as it could potentially dump a high number of CAN frames into the netdev queue from the soft hrtimer context. This does not affect the system stability but is just not nice and cooperative.
With this N_As/frame_txtime value the 'burst mode' is disabled by default.
As user space applications usually do not set the frame_txtime element of struct can_isotp_options the new in-kernel default is very likely overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked. To make sure that a N_As value of zero is only set intentional the value '0' is now interpreted as 'do not change the current value'. When a frame_txtime of zero is required for testing purposes this CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
--- include/uapi/linux/can/isotp.h | 28 ++++++++++++++++++++++------ net/can/isotp.c | 12 +++++++++++- 2 files changed, 33 insertions(+), 7 deletions(-)
include/uapi/linux/can/isotp.h +22 -6
@@ -137,20 +137,16 @@ struct can_isotp_ll_options {#define CAN_ISOTP_WAIT_TX_DONE 0x400/* wait for tx completion */ #define CAN_ISOTP_SF_BROADCAST 0x800/* 1-to-N functional addressing */ -/* default values */ +/* protocol machine default values */ #define CAN_ISOTP_DEFAULT_FLAGS 0#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC/* prevent bit-stuffing */ -#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0 +#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 50000/* 50 micro seconds */ #define CAN_ISOTP_DEFAULT_RECV_BS 0#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0 -#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU -#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN -#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 -/* * Remark on CAN_ISOTP_DEFAULT_RECV_* values: *
@@ -162,4 +158,24 @@ struct can_isotp_ll_options {* consistency and copied directly into the flow control (FC) frame. */ +/* link layer default values => make use of Classical CAN frames */ + +#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU +#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN +#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0 + +/* +* The CAN_ISOTP_DEFAULT_FRAME_TXTIME has become a non-zero value as +* it only makes sense for isotp implementation tests to run without +* a N_As value. As user space applications usually do not set the +* frame_txtime element of struct can_isotp_options the new in-kernel +* default is very likely overwritten with zero when the sockopt() +* CAN_ISOTP_OPTS is invoked. +* To make sure that a N_As value of zero is only set intentional the +* value '0' is now interpreted as 'do not change the current value'. +* When a frame_txtime of zero is required for testing purposes this +* CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime. +*/ +#define CAN_ISOTP_FRAME_TXTIME_ZERO 0xFFFFFFFF +#endif /* !_UAPI_CAN_ISOTP_H */
net/can/isotp.c +11 -1
@@ -141,6 +141,7 @@ struct isotp_sock {struct can_isotp_options opt;struct can_isotp_fc_options rxfc, txfc;struct can_isotp_ll_options ll; +u32 frame_txtime;u32 force_tx_stmin;u32 force_rx_stmin;struct tpcon rx, tx;
@@ -360,7 +361,7 @@ static int isotp_rcv_fc(struct isotp_sock *so, struct canfd_frame *cf, int ae) so->tx_gap =ktime_set (0 ,0 );/* add transmission time for CAN frame N_As */ - so->tx_gap =ktime_add_ns (so->tx_gap, so->opt.frame_txtime); + so->tx_gap =ktime_add_ns (so->tx_gap, so->frame_txtime);/* add waiting time for consecutive frames N_Cs */ if (so->opt.flags &CAN_ISOTP_FORCE_TXSTMIN ) so->tx_gap = ktime_add_ns(so->tx_gap,
@@ -1247,6 +1248,14 @@ static int isotp_setsockopt_locked(struct socket *sock, int level, int optname,/* no separate rx_ext_address is given => use ext_address */ if (!(so->opt.flags &CAN_ISOTP_RX_EXT_ADDR )) so->opt.rx_ext_address = so->opt.ext_address; + +/* check for frame_txtime changes (0 => no changes) */ +if (so->opt.frame_txtime) { +if (so->opt.frame_txtime ==CAN_ISOTP_FRAME_TXTIME_ZERO ) + so->frame_txtime =0 ; +else + so->frame_txtime = so->opt.frame_txtime; + }break ;case CAN_ISOTP_RECV_FC :
@@ -1448,6 +1457,7 @@ static int isotp_init(struct sock *sk) so->opt.rxpad_content =CAN_ISOTP_DEFAULT_PAD_CONTENT ; so->opt.txpad_content =CAN_ISOTP_DEFAULT_PAD_CONTENT ; so->opt.frame_txtime =CAN_ISOTP_DEFAULT_FRAME_TXTIME ; + so->frame_txtime =CAN_ISOTP_DEFAULT_FRAME_TXTIME ; so->rxfc.bs =CAN_ISOTP_DEFAULT_RECV_BS ; so->rxfc.stmin =CAN_ISOTP_DEFAULT_RECV_STMIN ; so->rxfc.wftmax =CAN_ISOTP_DEFAULT_RECV_WFTMAX ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 94/285 can: etas_es58x: es58x_fd_rx_event_msg(): initialize rx_event_msg before calling es58x_check_msg_len()
In reply to Greg Kroah-HartmanFrom: Vincent Mailhol <[email protected]>
[ Upstream commit 7a8cd7c0ee823a1cc893ab3feaa23e4b602bfb9a ]
Function es58x_fd_rx_event() invokes the es58x_check_msg_len() macro:
| ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);
While doing so, it dereferences an uninitialized
variable: *rx_event_msg.
This is actually harmless because es58x_check_msg_len() only uses preprocessor macros (sizeof() and __stringify()) on *rx_event_msg. c.f. [1].
Nonetheless, this pattern is confusing so the lines are reordered to make sure that rx_event_msg is correctly initialized.
This patch also fixes a false positive warning reported by cppcheck:
| cppcheck possible warnings: (new ones prefixed by >>, may not be real problems) | | In file included from drivers/net/can/usb/etas_es58x/es58x_fd.c: | >> drivers/net/can/usb/etas_es58x/es58x_fd.c:174:8: warning: Uninitialized variable: rx_event_msg [uninitvar] | ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len); | ^
[1] https://elixir.bootlin.com/linux/v5.16/source/drivers/net/can/usb/etas_es58x/es58x_core.h#L467
--- drivers/net/can/usb/etas_es58x/es58x_fd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/can/usb/etas_es58x/es58x_fd.c +1 -2
@@ -171,12 +171,11 @@ static int es58x_fd_rx_event_msg(struct net_device *netdev,const struct es58x_fd_rx_event_msg *rx_event_msg;int ret; + rx_event_msg = &es58x_fd_urb_cmd->rx_event_msg; ret =es58x_check_msg_len (es58x_dev->dev, *rx_event_msg, msg_len);if (ret)return ret; - rx_event_msg = &es58x_fd_urb_cmd->rx_event_msg; -return es58x_rx_err_msg (netdev, rx_event_msg->error_code, rx_event_msg->event_code,get_unaligned_le64 (&rx_event_msg->timestamp));
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 95/285 riscv: Fixed misaligned memory access. Fixed pointer comparison.
In reply to Greg Kroah-HartmanFrom: Michael T. Kloos <[email protected]>
[ Upstream commit 9d1f0ec9f71780e69ceb9d91697600c747d6e02e ]
Rewrote the RISC-V memmove() assembly implementation. The previous implementation did not check memory alignment and it compared 2 pointers with a signed comparison. The misaligned memory access would cause the kernel to crash on systems that did not emulate it in firmware and did not support it in hardware. Firmware emulation is slow and may not exist. The RISC-V spec does not guarantee that support for misaligned memory accesses will exist. It should not be depended on.
This patch now checks for XLEN granularity of co-alignment between the pointers. Failing that, copying is done by loading from the 2 contiguous and naturally aligned XLEN memory locations containing the overlapping XLEN sized data to be copied. The data is shifted into the correct place and binary or'ed together on each iteration. The result is then stored into the corresponding naturally aligned XLEN sized location in the destination. For unaligned data at the terminations of the regions to be copied or for copies less than (2 * XLEN) in size, byte copy is used.
This patch also now uses unsigned comparison for the pointers and migrates to the newer assembler annotations from the now deprecated ones.
--- arch/riscv/lib/memmove.S | 368 +++++++++++++++++++++++++++++++++------ 1 file changed, 310 insertions(+), 58 deletions(-)
arch/riscv/lib/memmove.S +310 -58
@@ -1,64 +1,316 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022 Michael T. Kloos <[email protected]> + */ #include <linux/linkage.h> #include <asm/asm.h> -ENTRY(__memmove) -WEAK(memmove) - move t0, a0 - move t1, a1 - - beq a0, a1, exit_memcpy - beqz a2, exit_memcpy - srli t2, a2, 0x2 - - slt t3, a0, a1 - beqz t3, do_reverse - - andi a2, a2, 0x3 - li t4, 1 - beqz t2, byte_copy - -word_copy: - lw t3, 0(a1) - addi t2, t2, -1 - addi a1, a1, 4 - sw t3, 0(a0) - addi a0, a0, 4 - bnez t2, word_copy - beqz a2, exit_memcpy - j byte_copy - -do_reverse: - add a0, a0, a2 - add a1, a1, a2 - andi a2, a2, 0x3 - li t4, -1 - beqz t2, reverse_byte_copy - -reverse_word_copy: - addi a1, a1, -4 - addi t2, t2, -1 - lw t3, 0(a1) - addi a0, a0, -4 - sw t3, 0(a0) - bnez t2, reverse_word_copy - beqz a2, exit_memcpy - -reverse_byte_copy: - addi a0, a0, -1 - addi a1, a1, -1 +SYM_FUNC_START(__memmove) +SYM_FUNC_START_WEAK(memmove) + /* + * Returns + * a0 - dest + * + * Parameters + * a0 - Inclusive first byte of dest + * a1 - Inclusive first byte of src + * a2 - Length of copy n + * + * Because the return matches the parameter register a0, + * we will not clobber or modify that register. + * + * Note: This currently only works on little-endian. + * To port to big-endian, reverse the direction of shifts + * in the 2 misaligned fixup copy loops. + */ + /* Return if nothing to do */ + beq a0, a1, return_from_memmove + beqz a2, return_from_memmove + + /* + * Register Uses + * Forward Copy: a1 - Index counter of src + * Reverse Copy: a4 - Index counter of src + * Forward Copy: t3 - Index counter of dest + * Reverse Copy: t4 - Index counter of dest + * Both Copy Modes: t5 - Inclusive first multibyte/aligned of dest + * Both Copy Modes: t6 - Non-Inclusive last multibyte/aligned of dest + * Both Copy Modes: t0 - Link / Temporary for load-store + * Both Copy Modes: t1 - Temporary for load-store + * Both Copy Modes: t2 - Temporary for load-store + * Both Copy Modes: a5 - dest to src alignment offset + * Both Copy Modes: a6 - Shift ammount + * Both Copy Modes: a7 - Inverse Shift ammount + * Both Copy Modes: a2 - Alternate breakpoint for unrolled loops + */ + + /* + * Solve for some register values now. + * Byte copy does not need t5 or t6. + */ + mv t3, a0 + add t4, a0, a2 + add a4, a1, a2 + + /* + * Byte copy if copying less than (2 * SZREG) bytes. This can + * cause problems with the bulk copy implementation and is + * small enough not to bother. + */ + andi t0, a2, -(2 * SZREG) + beqz t0, byte_copy + + /* + * Now solve for t5 and t6. + */ + andi t5, t3, -SZREG + andi t6, t4, -SZREG + /* + * If dest(Register t3) rounded down to the nearest naturally + * aligned SZREG address, does not equal dest, then add SZREG + * to find the low-bound of SZREG alignment in the dest memory + * region. Note that this could overshoot the dest memory + * region if n is less than SZREG. This is one reason why + * we always byte copy if n is less than SZREG. + * Otherwise, dest is already naturally aligned to SZREG. + */ + beq t5, t3, 1f + addi t5, t5, SZREG + 1: + + /* + * If the dest and src are co-aligned to SZREG, then there is + * no need for the full rigmarole of a full misaligned fixup copy. + * Instead, do a simpler co-aligned copy. + */ + xor t0, a0, a1 + andi t1, t0, (SZREG - 1) + beqz t1, coaligned_copy + /* Fall through to misaligned fixup copy */ + +misaligned_fixup_copy: + bltu a1, a0, misaligned_fixup_copy_reverse + +misaligned_fixup_copy_forward: + jal t0, byte_copy_until_aligned_forward + + andi a5, a1, (SZREG - 1) /* Find the alignment offset of src (a1) */ + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */ + sub a5, a1, t3 /* Find the difference between src and dest */ + andi a1, a1, -SZREG /* Align the src pointer */ + addi a2, t6, SZREG /* The other breakpoint for the unrolled loop*/ + + /* + * Compute The Inverse Shift + * a7 = XLEN - a6 = XLEN + -a6 + * 2s complement negation to find the negative: -a6 = ~a6 + 1 + * Add that to XLEN. XLEN = SZREG * 8. + */ + not a7, a6 + addi a7, a7, (SZREG * 8 + 1) + + /* + * Fix Misalignment Copy Loop - Forward + * load_val0 = load_ptr[0]; + * do { + * load_val1 = load_ptr[1]; + * store_ptr += 2; + * store_ptr[0 - 2] = (load_val0 >> {a6}) | (load_val1 << {a7}); + * + * if (store_ptr == {a2}) + * break; + * + * load_val0 = load_ptr[2]; + * load_ptr += 2; + * store_ptr[1 - 2] = (load_val1 >> {a6}) | (load_val0 << {a7}); + * + * } while (store_ptr != store_ptr_end); + * store_ptr = store_ptr_end; + */ + + REG_L t0, (0 * SZREG)(a1) + 1: + REG_L t1, (1 * SZREG)(a1) + addi t3, t3, (2 * SZREG) + srl t0, t0, a6 + sll t2, t1, a7 + or t2, t0, t2 + REG_S t2, ((0 * SZREG) - (2 * SZREG))(t3) + + beq t3, a2, 2f + + REG_L t0, (2 * SZREG)(a1) + addi a1, a1, (2 * SZREG) + srl t1, t1, a6 + sll t2, t0, a7 + or t2, t1, t2 + REG_S t2, ((1 * SZREG) - (2 * SZREG))(t3) + + bne t3, t6, 1b + 2: + mv t3, t6 /* Fix the dest pointer in case the loop was broken */ + + add a1, t3, a5 /* Restore the src pointer */ + j byte_copy_forward /* Copy any remaining bytes */ + +misaligned_fixup_copy_reverse: + jal t0, byte_copy_until_aligned_reverse + + andi a5, a4, (SZREG - 1) /* Find the alignment offset of src (a4) */ + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */ + sub a5, a4, t4 /* Find the difference between src and dest */ + andi a4, a4, -SZREG /* Align the src pointer */ + addi a2, t5, -SZREG /* The other breakpoint for the unrolled loop*/ + + /* + * Compute The Inverse Shift + * a7 = XLEN - a6 = XLEN + -a6 + * 2s complement negation to find the negative: -a6 = ~a6 + 1 + * Add that to XLEN. XLEN = SZREG * 8. + */ + not a7, a6 + addi a7, a7, (SZREG * 8 + 1) + + /* + * Fix Misalignment Copy Loop - Reverse + * load_val1 = load_ptr[0]; + * do { + * load_val0 = load_ptr[-1]; + * store_ptr -= 2; + * store_ptr[1] = (load_val0 >> {a6}) | (load_val1 << {a7}); + * + * if (store_ptr == {a2}) + * break; + * + * load_val1 = load_ptr[-2]; + * load_ptr -= 2; + * store_ptr[0] = (load_val1 >> {a6}) | (load_val0 << {a7}); + * + * } while (store_ptr != store_ptr_end); + * store_ptr = store_ptr_end; + */ + + REG_L t1, ( 0 * SZREG)(a4) + 1: + REG_L t0, (-1 * SZREG)(a4) + addi t4, t4, (-2 * SZREG) + sll t1, t1, a7 + srl t2, t0, a6 + or t2, t1, t2 + REG_S t2, ( 1 * SZREG)(t4) + + beq t4, a2, 2f + + REG_L t1, (-2 * SZREG)(a4) + addi a4, a4, (-2 * SZREG) + sll t0, t0, a7 + srl t2, t1, a6 + or t2, t0, t2 + REG_S t2, ( 0 * SZREG)(t4) + + bne t4, t5, 1b + 2: + mv t4, t5 /* Fix the dest pointer in case the loop was broken */ + + add a4, t4, a5 /* Restore the src pointer */ + j byte_copy_reverse /* Copy any remaining bytes */ + +/* + * Simple copy loops for SZREG co-aligned memory locations. + * These also make calls to do byte copies for any unaligned + * data at their terminations. + */ +coaligned_copy: + bltu a1, a0, coaligned_copy_reverse + +coaligned_copy_forward: + jal t0, byte_copy_until_aligned_forward + + 1: + REG_L t1, ( 0 * SZREG)(a1) + addi a1, a1, SZREG + addi t3, t3, SZREG + REG_S t1, (-1 * SZREG)(t3) + bne t3, t6, 1b + + j byte_copy_forward /* Copy any remaining bytes */ + +coaligned_copy_reverse: + jal t0, byte_copy_until_aligned_reverse + + 1: + REG_L t1, (-1 * SZREG)(a4) + addi a4, a4, -SZREG + addi t4, t4, -SZREG + REG_S t1, ( 0 * SZREG)(t4) + bne t4, t5, 1b + + j byte_copy_reverse /* Copy any remaining bytes */ + +/* + * These are basically sub-functions within the function. They + * are used to byte copy until the dest pointer is in alignment. + * At which point, a bulk copy method can be used by the + * calling code. These work on the same registers as the bulk + * copy loops. Therefore, the register values can be picked + * up from where they were left and we avoid code duplication + * without any overhead except the call in and return jumps. + */ +byte_copy_until_aligned_forward: + beq t3, t5, 2f + 1: + lb t1, 0(a1) + addi a1, a1, 1 + addi t3, t3, 1 + sb t1, -1(t3) + bne t3, t5, 1b + 2: + jalr zero, 0x0(t0) /* Return to multibyte copy loop */ + +byte_copy_until_aligned_reverse: + beq t4, t6, 2f + 1: + lb t1, -1(a4) + addi a4, a4, -1 + addi t4, t4, -1 + sb t1, 0(t4) + bne t4, t6, 1b + 2: + jalr zero, 0x0(t0) /* Return to multibyte copy loop */ + +/* + * Simple byte copy loops. + * These will byte copy until they reach the end of data to copy. + * At that point, they will call to return from memmove. + */ byte_copy: - lb t3, 0(a1) - addi a2, a2, -1 - sb t3, 0(a0) - add a1, a1, t4 - add a0, a0, t4 - bnez a2, byte_copy - -exit_memcpy: - move a0, t0 - move a1, t1 - ret -END(__memmove) + bltu a1, a0, byte_copy_reverse + +byte_copy_forward: + beq t3, t4, 2f + 1: + lb t1, 0(a1) + addi a1, a1, 1 + addi t3, t3, 1 + sb t1, -1(t3) + bne t3, t4, 1b + 2: + ret + +byte_copy_reverse: + beq t4, t3, 2f + 1: + lb t1, -1(a4) + addi a4, a4, -1 + addi t4, t4, -1 + sb t1, 0(t4) + bne t4, t3, 1b + 2: + +return_from_memmove: + ret + +SYM_FUNC_END(memmove) +SYM_FUNC_END(__memmove)
Signature · 1 line
2.35.1
Re: [PATCH 5.16 095/285] riscv: Fixed misaligned memory access. Fixed pointer comparison.
Backporting to 5.16 looks good to me.
Michael
Quoted 413 lines · Greg Kroah-Hartman
From: Michael T. Kloos <[email protected]>
[ Upstream commit
9d1f0ec9f71780e69ceb9d91697600c747d6e02e]Rewrote the RISC-V
memmove()assembly implementation. The previous implementation did not check memory alignment and it compared 2 pointers with a signed comparison. The misaligned memory access would cause the kernel to crash on systems that did not emulate it in firmware and did not support it in hardware. Firmware emulation is slow and may not exist. The RISC-V spec does not guarantee that support for misaligned memory accesses will exist. It should not be depended on.This patch now checks for XLEN granularity of co-alignment between the pointers. Failing that, copying is done by loading from the 2 contiguous and naturally aligned XLEN memory locations containing the overlapping XLEN sized data to be copied. The data is shifted into the correct place and binary or'ed together on each iteration. The result is then stored into the corresponding naturally aligned XLEN sized location in the destination. For unaligned data at the terminations of the regions to be copied or for copies less than (2 * XLEN) in size, byte copy is used.
This patch also now uses unsigned comparison for the pointers and migrates to the newer assembler annotations from the now deprecated ones.
Signed-off-by Michael T. Kloos <[email protected]>Signed-off-by Palmer Dabbelt <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- arch/riscv/lib/memmove.S | 368 +++++++++++++++++++++++++++++++++------ 1 file changed, 310 insertions(+), 58 deletions(-)arch/riscv/lib/memmove.S +310
-58@@ -1,64 +1,316 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022 Michael T. Kloos <[email protected]> + */ #include <linux/linkage.h> #include <asm/asm.h> -ENTRY(__memmove) -WEAK(memmove) - move t0, a0 - move t1, a1 - - beq a0, a1, exit_memcpy - beqz a2, exit_memcpy - srli t2, a2, 0x2 - - slt t3, a0, a1 - beqz t3, do_reverse - - andi a2, a2, 0x3 - li t4, 1 - beqz t2, byte_copy - -word_copy: - lw t3, 0(a1) - addi t2, t2, -1 - addi a1, a1, 4 - sw t3, 0(a0) - addi a0, a0, 4 - bnez t2, word_copy - beqz a2, exit_memcpy - j byte_copy - -do_reverse: - add a0, a0, a2 - add a1, a1, a2 - andi a2, a2, 0x3 - li t4, -1 - beqz t2, reverse_byte_copy - -reverse_word_copy: - addi a1, a1, -4 - addi t2, t2, -1 - lw t3, 0(a1) - addi a0, a0, -4 - sw t3, 0(a0) - bnez t2, reverse_word_copy - beqz a2, exit_memcpy - -reverse_byte_copy: - addi a0, a0, -1 - addi a1, a1, -1 +SYM_FUNC_START(__memmove) +SYM_FUNC_START_WEAK(memmove) + /* + * Returns + * a0 - dest + * + * Parameters + * a0 - Inclusive first byte of dest + * a1 - Inclusive first byte of src + * a2 - Length of copy n + * + * Because the return matches the parameter register a0, + * we will not clobber or modify that register. + * + * Note: This currently only works on little-endian. + * To port to big-endian, reverse the direction of shifts + * in the 2 misaligned fixup copy loops. + */ + /* Return if nothing to do */ + beq a0, a1, return_from_memmove + beqz a2, return_from_memmove + + /* + * Register Uses + * Forward Copy: a1 - Index counter of src + * Reverse Copy: a4 - Index counter of src + * Forward Copy: t3 - Index counter of dest + * Reverse Copy: t4 - Index counter of dest + * Both Copy Modes: t5 - Inclusive first multibyte/aligned of dest + * Both Copy Modes: t6 - Non-Inclusive last multibyte/aligned of dest + * Both Copy Modes: t0 - Link / Temporary for load-store + * Both Copy Modes: t1 - Temporary for load-store + * Both Copy Modes: t2 - Temporary for load-store + * Both Copy Modes: a5 - dest to src alignment offset + * Both Copy Modes: a6 - Shift ammount + * Both Copy Modes: a7 - Inverse Shift ammount + * Both Copy Modes: a2 - Alternate breakpoint for unrolled loops + */ + + /* + * Solve for some register values now. + * Byte copy does not need t5 or t6. + */ + mv t3, a0 + add t4, a0, a2 + add a4, a1, a2 + + /* + * Byte copy if copying less than (2 * SZREG) bytes. This can + * cause problems with the bulk copy implementation and is + * small enough not to bother. + */ + andi t0, a2, -(2 * SZREG) + beqz t0, byte_copy + + /* + * Now solve for t5 and t6. + */ + andi t5, t3, -SZREG + andi t6, t4, -SZREG + /* + * If dest(Register t3) rounded down to the nearest naturally + * aligned SZREG address, does not equal dest, then add SZREG + * to find the low-bound of SZREG alignment in the dest memory + * region. Note that this could overshoot the dest memory + * region if n is less than SZREG. This is one reason why + * we always byte copy if n is less than SZREG. + * Otherwise, dest is already naturally aligned to SZREG. + */ + beq t5, t3, 1f + addi t5, t5, SZREG + 1: + + /* + * If the dest and src are co-aligned to SZREG, then there is + * no need for the full rigmarole of a full misaligned fixup copy. + * Instead, do a simpler co-aligned copy. + */ + xor t0, a0, a1 + andi t1, t0, (SZREG - 1) + beqz t1, coaligned_copy + /* Fall through to misaligned fixup copy */ + +misaligned_fixup_copy: + bltu a1, a0, misaligned_fixup_copy_reverse + +misaligned_fixup_copy_forward: + jal t0, byte_copy_until_aligned_forward + + andi a5, a1, (SZREG - 1) /* Find the alignment offset of src (a1) */ + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */ + sub a5, a1, t3 /* Find the difference between src and dest */ + andi a1, a1, -SZREG /* Align the src pointer */ + addi a2, t6, SZREG /* The other breakpoint for the unrolled loop*/ + + /* + * Compute The Inverse Shift + * a7 = XLEN - a6 = XLEN + -a6 + * 2s complement negation to find the negative: -a6 = ~a6 + 1 + * Add that to XLEN. XLEN = SZREG * 8. + */ + not a7, a6 + addi a7, a7, (SZREG * 8 + 1) + + /* + * Fix Misalignment Copy Loop - Forward + * load_val0 = load_ptr[0]; + * do { + * load_val1 = load_ptr[1]; + * store_ptr += 2; + * store_ptr[0 - 2] = (load_val0 >> {a6}) | (load_val1 << {a7}); + * + * if (store_ptr == {a2}) + * break; + * + * load_val0 = load_ptr[2]; + * load_ptr += 2; + * store_ptr[1 - 2] = (load_val1 >> {a6}) | (load_val0 << {a7}); + * + * } while (store_ptr != store_ptr_end); + * store_ptr = store_ptr_end; + */ + + REG_L t0, (0 * SZREG)(a1) + 1: + REG_L t1, (1 * SZREG)(a1) + addi t3, t3, (2 * SZREG) + srl t0, t0, a6 + sll t2, t1, a7 + or t2, t0, t2 + REG_S t2, ((0 * SZREG) - (2 * SZREG))(t3) + + beq t3, a2, 2f + + REG_L t0, (2 * SZREG)(a1) + addi a1, a1, (2 * SZREG) + srl t1, t1, a6 + sll t2, t0, a7 + or t2, t1, t2 + REG_S t2, ((1 * SZREG) - (2 * SZREG))(t3) + + bne t3, t6, 1b + 2: + mv t3, t6 /* Fix the dest pointer in case the loop was broken */ + + add a1, t3, a5 /* Restore the src pointer */ + j byte_copy_forward /* Copy any remaining bytes */ + +misaligned_fixup_copy_reverse: + jal t0, byte_copy_until_aligned_reverse + + andi a5, a4, (SZREG - 1) /* Find the alignment offset of src (a4) */ + slli a6, a5, 3 /* Multiply by 8 to convert that to bits to shift */ + sub a5, a4, t4 /* Find the difference between src and dest */ + andi a4, a4, -SZREG /* Align the src pointer */ + addi a2, t5, -SZREG /* The other breakpoint for the unrolled loop*/ + + /* + * Compute The Inverse Shift + * a7 = XLEN - a6 = XLEN + -a6 + * 2s complement negation to find the negative: -a6 = ~a6 + 1 + * Add that to XLEN. XLEN = SZREG * 8. + */ + not a7, a6 + addi a7, a7, (SZREG * 8 + 1) + + /* + * Fix Misalignment Copy Loop - Reverse + * load_val1 = load_ptr[0]; + * do { + * load_val0 = load_ptr[-1]; + * store_ptr -= 2; + * store_ptr[1] = (load_val0 >> {a6}) | (load_val1 << {a7}); + * + * if (store_ptr == {a2}) + * break; + * + * load_val1 = load_ptr[-2]; + * load_ptr -= 2; + * store_ptr[0] = (load_val1 >> {a6}) | (load_val0 << {a7}); + * + * } while (store_ptr != store_ptr_end); + * store_ptr = store_ptr_end; + */ + + REG_L t1, ( 0 * SZREG)(a4) + 1: + REG_L t0, (-1 * SZREG)(a4) + addi t4, t4, (-2 * SZREG) + sll t1, t1, a7 + srl t2, t0, a6 + or t2, t1, t2 + REG_S t2, ( 1 * SZREG)(t4) + + beq t4, a2, 2f + + REG_L t1, (-2 * SZREG)(a4) + addi a4, a4, (-2 * SZREG) + sll t0, t0, a7 + srl t2, t1, a6 + or t2, t0, t2 + REG_S t2, ( 0 * SZREG)(t4) + + bne t4, t5, 1b + 2: + mv t4, t5 /* Fix the dest pointer in case the loop was broken */ + + add a4, t4, a5 /* Restore the src pointer */ + j byte_copy_reverse /* Copy any remaining bytes */ + +/* + * Simple copy loops for SZREG co-aligned memory locations. + * These also make calls to do byte copies for any unaligned + * data at their terminations. + */ +coaligned_copy: + bltu a1, a0, coaligned_copy_reverse + +coaligned_copy_forward: + jal t0, byte_copy_until_aligned_forward + + 1: + REG_L t1, ( 0 * SZREG)(a1) + addi a1, a1, SZREG + addi t3, t3, SZREG + REG_S t1, (-1 * SZREG)(t3) + bne t3, t6, 1b + + j byte_copy_forward /* Copy any remaining bytes */ + +coaligned_copy_reverse: + jal t0, byte_copy_until_aligned_reverse + + 1: + REG_L t1, (-1 * SZREG)(a4) + addi a4, a4, -SZREG + addi t4, t4, -SZREG + REG_S t1, ( 0 * SZREG)(t4) + bne t4, t5, 1b + + j byte_copy_reverse /* Copy any remaining bytes */ + +/* + * These are basically sub-functions within the function. They + * are used to byte copy until the dest pointer is in alignment. + * At which point, a bulk copy method can be used by the + * calling code. These work on the same registers as the bulk + * copy loops. Therefore, the register values can be picked + * up from where they were left and we avoid code duplication + * without any overhead except the call in and return jumps. + */ +byte_copy_until_aligned_forward: + beq t3, t5, 2f + 1: + lb t1, 0(a1) + addi a1, a1, 1 + addi t3, t3, 1 + sb t1, -1(t3) + bne t3, t5, 1b + 2: + jalr zero, 0x0(t0) /* Return to multibyte copy loop */ + +byte_copy_until_aligned_reverse: + beq t4, t6, 2f + 1: + lb t1, -1(a4) + addi a4, a4, -1 + addi t4, t4, -1 + sb t1, 0(t4) + bne t4, t6, 1b + 2: + jalr zero, 0x0(t0) /* Return to multibyte copy loop */ + +/* + * Simple byte copy loops. + * These will byte copy until they reach the end of data to copy. + * At that point, they will call to return from memmove. + */ byte_copy: - lb t3, 0(a1) - addi a2, a2, -1 - sb t3, 0(a0) - add a1, a1, t4 - add a0, a0, t4 - bnez a2, byte_copy - -exit_memcpy: - move a0, t0 - move a1, t1 - ret -END(__memmove) + bltu a1, a0, byte_copy_reverse + +byte_copy_forward: + beq t3, t4, 2f + 1: + lb t1, 0(a1) + addi a1, a1, 1 + addi t3, t3, 1 + sb t1, -1(t3) + bne t3, t4, 1b + 2: + ret + +byte_copy_reverse: + beq t4, t3, 2f + 1: + lb t1, -1(a4) + addi a4, a4, -1 + addi t4, t4, -1 + sb t1, 0(t4) + bne t4, t3, 1b + 2: + +return_from_memmove: + ret + +SYM_FUNC_END(memmove) +SYM_FUNC_END(__memmove)
Greg Kroah-Hartman
maintainerPATCH 96/285 net: account alternate interface name memory
In reply to Greg Kroah-HartmanFrom: Jakub Kicinski <[email protected]>
[ Upstream commit 5d26cff5bdbebdf98ba48217c078ff102536f134 ]
George reports that altnames can eat up kernel memory. We should charge that memory appropriately.
--- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/rtnetlink.c +1 -1
@@ -3637,7 +3637,7 @@ static int rtnl_alt_ifname(int cmd, struct net_device *dev, struct nlattr *attr,if (err)return err; - alt_ifname =nla_strdup (attr,GFP_KERNEL ); + alt_ifname =nla_strdup (attr,GFP_KERNEL_ACCOUNT );if (!alt_ifname)return -ENOMEM ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 97/285 net: limit altnames to 64k total
In reply to Greg Kroah-HartmanFrom: Jakub Kicinski <[email protected]>
[ Upstream commit 155fb43b70b5fce341347a77d1af2765d1e8fbb8 ]
Property list (altname is a link "property") is wrapped in a nlattr. nlattrs length is 16bit so practically speaking the list of properties can't be longer than that, otherwise user space would have to interpret broken netlink messages.
Prevent the problem from occurring by checking the length of the property list before adding new entries.
--- net/core/rtnetlink.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
net/core/rtnetlink.c +11 -0
@@ -3631,12 +3631,23 @@ static int rtnl_alt_ifname(int cmd, struct net_device *dev, struct nlattr *attr, bool *changed, struct netlink_ext_ack *extack) { char *alt_ifname; +size_t size;int err; err =nla_validate (attr, attr->nla_len,IFLA_MAX , ifla_policy, extack);if (err)return err; +if (cmd ==RTM_NEWLINKPROP ) { + size =rtnl_prop_list_size (dev); + size +=nla_total_size (ALTIFNAMSIZ ); +if (size >=U16_MAX ) { +NL_SET_ERR_MSG (extack, +"effective property list too long" ); +return -EINVAL ; + } + } + alt_ifname =nla_strdup (attr,GFP_KERNEL_ACCOUNT );if (!alt_ifname)return -ENOMEM ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 98/285 net/mlx5e: Remove overzealous validations in netlink EEPROM query
In reply to Greg Kroah-HartmanFrom: Gal Pressman <[email protected]>
[ Upstream commit 970adfb76095fa719778d70a6b86030d2feb88dd ]
Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query (get_module_eeprom_by_page) the driver should not try to validate the query parameters, but just perform the read requested by the userspace.
Recent discussion in the mailing list:
https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/
--- .../net/ethernet/mellanox/mlx5/core/port.c | 23 ------------------- 1 file changed, 23 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/port.c +0 -23
@@ -433,35 +433,12 @@ int mlx5_query_module_eeprom_by_page(struct mlx5_core_dev *dev,struct mlx5_module_eeprom_query_params *params, u8 *data) { - u8 module_id; int err; err =mlx5_query_module_num (dev, ¶ms->module_number);if (err)return err; - err =mlx5_query_module_id (dev, params->module_number, &module_id); -if (err) -return err; - -switch (module_id) { -case MLX5_MODULE_ID_SFP : -if (params->page >0 ) -return -EINVAL ; -break ; -case MLX5_MODULE_ID_QSFP : -case MLX5_MODULE_ID_QSFP28 : -case MLX5_MODULE_ID_QSFP_PLUS : -if (params->page >3 ) -return -EINVAL ; -break ; -case MLX5_MODULE_ID_DSFP : -break ; -default : -mlx5_core_err (dev,"Module ID not recognized: 0x%x\n" , module_id); -return -EINVAL ; - } -if (params->i2c_address !=MLX5_I2C_ADDR_HIGH && params->i2c_address !=MLX5_I2C_ADDR_LOW ) {mlx5_core_err (dev,"I2C address not recognized: 0x%x\n" , params->i2c_address);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 99/285 platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
In reply to Greg Kroah-HartmanFrom: Jorge Lopez <[email protected]>
[ Upstream commit 520ee4ea1cc60251a6e3c911cf0336278aa52634 ]
The purpose of this patch is to introduce a fix and removal of the current hack when determining tablet mode status.
Determining the tablet mode status requires reading Byte 0 bit 2 as reported by HPWMI_HARDWARE_QUERY. The investigation identified the failure was rooted in two areas: HPWMI_HARDWARE_QUERY failure (0x05) and reading Byte 0, bit 2 only to determine the table mode status. HPWMI_HARDWARE_QUERY WMI failure also rendered the dock state value invalid.
The latest changes use SMBIOS Type 3 (chassis type) and WMI Command 0x40 (device_mode_status) information to determine if the device is in tablet mode or not.
hp_wmi_hw_state function was split into two functions; hp_wmi_get_dock_state and hp_wmi_get_tablet_mode. The new functions separate how dock_state and tablet_mode is handled in a cleaner manner.
All changes were validated on a HP ZBook Workstation notebook, HP EliteBook x360, and HP EliteBook 850 G8.
--- drivers/platform/x86/hp-wmi.c | 71 +++++++++++++++++++++++++---------- 1 file changed, 52 insertions(+), 19 deletions(-)
drivers/platform/x86/hp-wmi.c +52 -19
@@ -35,10 +35,6 @@ MODULE_LICENSE("GPL");MODULE_ALIAS ("wmi:95F24279-4D7B-4334-9387-ACCDC67EF61C" );MODULE_ALIAS ("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4" ); -static int enable_tablet_mode_sw =-1 ; -module_param (enable_tablet_mode_sw, int,0444 ); -MODULE_PARM_DESC (enable_tablet_mode_sw,"Enable SW_TABLET_MODE reporting (-1=auto, 0=no, 1=yes)" ); -#define HPWMI_EVENT_GUID "95F24279-4D7B-4334-9387-ACCDC67EF61C"#define HPWMI_BIOS_GUID "5FB7F034-2C63-45e9-BE91-3D44E2C707E4"#define HP_OMEN_EC_THERMAL_PROFILE_OFFSET 0x95
@@ -107,6 +103,7 @@ enum hp_wmi_commandtype {HPWMI_FEATURE2_QUERY =0x0d ,HPWMI_WIRELESS2_QUERY =0x1b ,HPWMI_POSTCODEERROR_QUERY =0x2a , +HPWMI_SYSTEM_DEVICE_MODE =0x40 , HPWMI_THERMAL_PROFILE_QUERY = 0x4c, };
@@ -217,6 +214,19 @@ struct rfkill2_device {static int rfkill2_count;static struct rfkill2_device rfkill2[HPWMI_MAX_RFKILL2_DEVICES ]; +/* +* Chassis Types values were obtained from SMBIOS reference +* specification version 3.00. A complete list of system enclosures +* and chassis types is available on Table 17. +*/ +static const char *const tablet_chassis_types[] = { +"30" ,/* Tablet*/ +"31" ,/* Convertible */ +"32" /* Detachable */ +}; + +#define DEVICE_MODE_TABLET 0x06 +/* map output size to the corresponding WMI method id */ static inline int encode_outsize_for_pvsz (int outsize) {
@@ -345,14 +355,39 @@ static int hp_wmi_read_int(int query)return val; } -static int hp_wmi_hw_state (int mask) +static int hp_wmi_get_dock_state (void ) {int state =hp_wmi_read_int (HPWMI_HARDWARE_QUERY );if (state <0 )return state; -return !!(state & mask); +return !!(state &HPWMI_DOCK_MASK ); +} + +static int hp_wmi_get_tablet_mode (void ) +{ +char system_device_mode[4 ] = {0 }; +const char *chassis_type; +bool tablet_found; +int ret; + + chassis_type =dmi_get_system_info (DMI_CHASSIS_TYPE ); +if (!chassis_type) +return -ENODEV ; + + tablet_found =match_string (tablet_chassis_types, +ARRAY_SIZE (tablet_chassis_types), + chassis_type) >=0 ; +if (!tablet_found) +return -ENODEV ; + + ret =hp_wmi_perform_query (HPWMI_SYSTEM_DEVICE_MODE ,HPWMI_READ , + system_device_mode,0 ,sizeof (system_device_mode)); +if (ret <0 ) +return ret; + +return system_device_mode[0 ] ==DEVICE_MODE_TABLET ; }static int omen_thermal_profile_set (int mode)
@@ -568,7 +603,7 @@ static ssize_t als_show(struct device *dev, struct device_attribute *attr,static ssize_t dock_show (struct device *dev,struct device_attribute *attr,char *buf) { -int value =hp_wmi_hw_state (HPWMI_DOCK_MASK ); +int value =hp_wmi_get_dock_state ();if (value <0 )return value;return sprintf (buf,"%d\n" , value);
@@ -577,7 +612,7 @@ static ssize_t dock_show(struct device *dev, struct device_attribute *attr,static ssize_t tablet_show (struct device *dev,struct device_attribute *attr,char *buf) { -int value =hp_wmi_hw_state (HPWMI_TABLET_MASK ); +int value =hp_wmi_get_tablet_mode ();if (value <0 )return value;return sprintf (buf,"%d\n" , value);
@@ -699,10 +734,10 @@ static void hp_wmi_notify(u32 value, void *context)case HPWMI_DOCK_EVENT :if (test_bit (SW_DOCK , hp_wmi_input_dev->swbit))input_report_switch (hp_wmi_input_dev,SW_DOCK , -hp_wmi_hw_state (HPWMI_DOCK_MASK )); +hp_wmi_get_dock_state ());if (test_bit (SW_TABLET_MODE , hp_wmi_input_dev->swbit))input_report_switch (hp_wmi_input_dev,SW_TABLET_MODE , -hp_wmi_hw_state (HPWMI_TABLET_MASK )); +hp_wmi_get_tablet_mode ());input_sync (hp_wmi_input_dev);break ;case HPWMI_PARK_HDD :
@@ -780,19 +815,17 @@ static int __init hp_wmi_input_setup(void)__set_bit (EV_SW , hp_wmi_input_dev->evbit);/* Dock */ - val =hp_wmi_hw_state (HPWMI_DOCK_MASK ); + val =hp_wmi_get_dock_state ();if (!(val <0 )) {__set_bit (SW_DOCK , hp_wmi_input_dev->swbit);input_report_switch (hp_wmi_input_dev,SW_DOCK , val); }/* Tablet mode */ -if (enable_tablet_mode_sw >0 ) { - val =hp_wmi_hw_state (HPWMI_TABLET_MASK ); -if (val >=0 ) { -__set_bit (SW_TABLET_MODE , hp_wmi_input_dev->swbit); -input_report_switch (hp_wmi_input_dev,SW_TABLET_MODE , val); - } + val =hp_wmi_get_tablet_mode (); +if (!(val <0 )) { +__set_bit (SW_TABLET_MODE , hp_wmi_input_dev->swbit); +input_report_switch (hp_wmi_input_dev,SW_TABLET_MODE , val); } err =sparse_keymap_setup (hp_wmi_input_dev, hp_wmi_keymap,NULL );
@@ -1227,10 +1260,10 @@ static int hp_wmi_resume_handler(struct device *device)if (hp_wmi_input_dev) {if (test_bit (SW_DOCK , hp_wmi_input_dev->swbit))input_report_switch (hp_wmi_input_dev,SW_DOCK , -hp_wmi_hw_state (HPWMI_DOCK_MASK )); +hp_wmi_get_dock_state ());if (test_bit (SW_TABLET_MODE , hp_wmi_input_dev->swbit))input_report_switch (hp_wmi_input_dev,SW_TABLET_MODE , -hp_wmi_hw_state (HPWMI_TABLET_MASK )); +hp_wmi_get_tablet_mode ());input_sync (hp_wmi_input_dev); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 100/285 platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
In reply to Greg Kroah-HartmanFrom: Jorge Lopez <[email protected]>
[ Upstream commit be9d73e64957bbd31ee9a0d11adc0f720974c558 ]
Several WMI queries leverage hp_wmi_read_int function to read their data. hp_wmi_read_int function was corrected in a previous patch. Now, this function invokes hp_wmi_perform_query with input parameter of size zero and the output buffer of size 4.
WMI commands calling hp_wmi_perform_query with input buffer size value of zero are listed below.
HPWMI_DISPLAY_QUERYHPWMI_HDDTEMP_QUERYHPWMI_ALS_QUERYHPWMI_HARDWARE_QUERYHPWMI_WIRELESS_QUERYHPWMI_BIOS_QUERYHPWMI_FEATURE_QUERYHPWMI_HOTKEY_QUERYHPWMI_FEATURE2_QUERYHPWMI_WIRELESS2_QUERYHPWMI_POSTCODEERROR_QUERYHPWMI_THERMAL_PROFILE_QUERYHPWMI_FAN_SPEED_MAX_GET_QUERY
Invoking those WMI commands with an input buffer size greater than zero will cause error 0x05 to be returned.
All WMI commands executed by the driver were reviewed and changes were made to ensure the expected input and output buffer size match the WMI specification.
Changes were validated on a HP ZBook Workstation notebook, HP EliteBook x360, and HP EliteBook 850 G8. Additional validation was included in the test process to ensure no other commands were incorrectly handled.
--- drivers/platform/x86/hp-wmi.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/platform/x86/hp-wmi.c +11 -11
@@ -330,7 +330,7 @@ static int hp_wmi_get_fan_speed(int fan)char fan_data[4 ] = { fan,0 ,0 ,0 };int ret =hp_wmi_perform_query (HPWMI_FAN_SPEED_GET_QUERY ,HPWMI_GM , - &fan_data,sizeof (fan_data), + &fan_data,sizeof (char ),sizeof (fan_data));if (ret !=0 )
@@ -399,7 +399,7 @@ static int omen_thermal_profile_set(int mode)return -EINVAL ; ret =hp_wmi_perform_query (HPWMI_SET_PERFORMANCE_MODE ,HPWMI_GM , - &buffer,sizeof (buffer),sizeof (buffer)); + &buffer,sizeof (buffer),0 );if (ret)return ret <0 ? ret : -EINVAL ;
@@ -436,7 +436,7 @@ static int hp_wmi_fan_speed_max_set(int enabled)int ret; ret =hp_wmi_perform_query (HPWMI_FAN_SPEED_MAX_SET_QUERY ,HPWMI_GM , - &enabled,sizeof (enabled),sizeof (enabled)); + &enabled,sizeof (enabled),0 );if (ret)return ret <0 ? ret : -EINVAL ;
@@ -449,7 +449,7 @@ static int hp_wmi_fan_speed_max_get(void)int val =0 , ret; ret =hp_wmi_perform_query (HPWMI_FAN_SPEED_MAX_GET_QUERY ,HPWMI_GM , - &val,sizeof (val),sizeof (val)); + &val,0 ,sizeof (val));if (ret)return ret <0 ? ret : -EINVAL ;
@@ -461,7 +461,7 @@ static int __init hp_wmi_bios_2008_later(void) {int state =0 ;int ret =hp_wmi_perform_query (HPWMI_FEATURE_QUERY ,HPWMI_READ , &state, -sizeof (state),sizeof (state)); +0 ,sizeof (state));if (!ret)return 1 ;
@@ -472,7 +472,7 @@ static int __init hp_wmi_bios_2009_later(void) {u8 state[128 ];int ret =hp_wmi_perform_query (HPWMI_FEATURE2_QUERY ,HPWMI_READ , &state, -sizeof (state),sizeof (state)); +0 ,sizeof (state));if (!ret)return 1 ;
@@ -550,7 +550,7 @@ static int hp_wmi_rfkill2_refresh(void)int err, i; err =hp_wmi_perform_query (HPWMI_WIRELESS2_QUERY ,HPWMI_READ , &state, -sizeof (state),sizeof (state)); +0 ,sizeof (state));if (err)return err;
@@ -639,7 +639,7 @@ static ssize_t als_store(struct device *dev, struct device_attribute *attr,return ret; ret =hp_wmi_perform_query (HPWMI_ALS_QUERY ,HPWMI_WRITE , &tmp, -sizeof (tmp),sizeof (tmp)); +sizeof (tmp),0 );if (ret)return ret <0 ? ret : -EINVAL ;
@@ -660,9 +660,9 @@ static ssize_t postcode_store(struct device *dev, struct device_attribute *attr,if (clear == false)return -EINVAL ; -/* Clear the POST error code. It is kept until until cleared. */ +/* Clear the POST error code. It is kept until cleared. */ ret =hp_wmi_perform_query (HPWMI_POSTCODEERROR_QUERY ,HPWMI_WRITE , &tmp, -sizeof (tmp),sizeof (tmp)); +sizeof (tmp),0 );if (ret)return ret <0 ? ret : -EINVAL ;
@@ -952,7 +952,7 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)int err, i; err =hp_wmi_perform_query (HPWMI_WIRELESS2_QUERY ,HPWMI_READ , &state, -sizeof (state),sizeof (state)); +0 ,sizeof (state));if (err)return err <0 ? err : -EINVAL ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 101/285 net: sfp: add 2500base-X quirk for Lantech SFP module
In reply to Greg Kroah-HartmanFrom: Michael Walle <[email protected]>
[ Upstream commit 00eec9fe4f3b9588b4bfa8ef9dd0aae96407d5d7 ]
The Lantech 8330-262D-E module is 2500base-X capable, but it reports the nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the module.
The following in an EEPROM dump of such a SFP with the serial number redacted:
00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00 ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20 ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32 ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb D-E V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98 220214 h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54 EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20 IBLE
--- drivers/net/phy/sfp-bus.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/phy/sfp-bus.c +6 -0
@@ -74,6 +74,12 @@ static const struct sfp_quirk sfp_quirks[] = { .vendor = "HUAWEI", .part = "MA5671A", .modes = sfp_quirk_2500basex, + }, { +// Lantech 8330-262D-E can operate at 2500base-X, but +// incorrectly report 2500MBd NRZ in their EEPROM + .vendor = "Lantech", + .part = "8330-262D-E", + .modes = sfp_quirk_2500basex, }, { .vendor = "UBNT", .part = "UF-INSTANT",
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 102/285 usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
In reply to Greg Kroah-HartmanFrom: H. Nikolaus Schaller <[email protected]>
[ Upstream commit ac01df343e5a6c6bcead2ed421af1fde30f73e7e ]
Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled.
Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox() during probe leads to:
[ 10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164 [ 10.351919] unbalanced disables for smps10_out1 [ 10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4 [ 10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139 [ 10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 10.411455] unwind_backtrace from show_stack+0x10/0x14 [ 10.416970] show_stack from dump_stack_lvl+0x40/0x4c [ 10.422313] dump_stack_lvl from __warn+0xb8/0x170 [ 10.427377] __warn from warn_slowpath_fmt+0x70/0x9c [ 10.432595] warn_slowpath_fmt from _regulator_disable+0x40/0x164 [ 10.439037] _regulator_disable from regulator_disable+0x30/0x64 [ 10.445382] regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap] [ 10.453116] dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap] [ 10.467021] dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8 [ 10.481762] platform_probe from really_probe+0x168/0x2fc [ 10.481782] really_probe from __driver_probe_device+0xc4/0xd8 [ 10.481782] __driver_probe_device from driver_probe_device+0x24/0xa4 [ 10.503762] driver_probe_device from __driver_attach+0xc4/0xd8 [ 10.510018] __driver_attach from bus_for_each_dev+0x64/0xa0 [ 10.516001] bus_for_each_dev from bus_add_driver+0x148/0x1a4 [ 10.524880] bus_add_driver from driver_register+0xb4/0xf8 [ 10.530678] driver_register from do_one_initcall+0x90/0x1c4 [ 10.536661] do_one_initcall from do_init_module+0x4c/0x200 [ 10.536683] do_init_module from load_module+0x13dc/0x1910 [ 10.551159] load_module from sys_finit_module+0xc8/0xd8 [ 10.561319] sys_finit_module from __sys_trace_return+0x0/0x18 [ 10.561336] Exception stack(0xc344bfa8 to 0xc344bff0) [ 10.561341] bfa0: b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398 [ 10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778 [ 10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2 [ 10.601345] ---[ end trace 0000000000000000 ]---
Fix this unnecessary warning by checking if the regulator is enabled.
--- drivers/usb/dwc3/dwc3-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc3/dwc3-omap.c +1 -1
@@ -242,7 +242,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,break ;case OMAP_DWC3_ID_FLOAT : -if (omap->vbus_reg) +if (omap->vbus_reg &®ulator_is_enabled (omap->vbus_reg))regulator_disable (omap->vbus_reg); val =dwc3_omap_read_utmi_ctrl (omap); val |=USBOTGSS_UTMI_OTG_CTRL_IDDIG ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 103/285 mt76: fix monitor mode crash with sdio driver
In reply to Greg Kroah-HartmanFrom: Deren Wu <[email protected]>
[ Upstream commit 123bc712b1de0805f9d683687e17b1ec2aba0b68 ]
mt7921s driver may receive frames with fragment buffers. If there is a CTS packet received in monitor mode, the payload is 10 bytes only and need 6 bytes header padding after RXD buffer. However, only RXD in the first linear buffer, if we pull buffer size RXD-size+6 bytes with skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in __skb_pull().
To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to 256 to make sure all MCU operation in linear buffer.
[ 52.007562] kernel BUG at include/linux/skbuff.h:2313! [ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 52.007987] pc : skb_pull+0x48/0x4c [ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common] [ 52.008361] Call trace: [ 52.008377] skb_pull+0x48/0x4c [ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c] [ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917] [ 52.008449] kthread+0x148/0x3ac [ 52.008466] ret_from_fork+0x10/0x30
--- drivers/net/wireless/mediatek/mt76/mt76.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt76.h +1 -1
@@ -19,7 +19,7 @@#define MT_MCU_RING_SIZE 32#define MT_RX_BUF_SIZE 2048 -#define MT_SKB_HEAD_LEN 128 +#define MT_SKB_HEAD_LEN 256#define MT_MAX_NON_AQL_PKT 16#define MT_TXQ_FREE_THR 32
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 104/285 xtensa: fix DTC warning unit_address_format
In reply to Greg Kroah-HartmanFrom: Max Filippov <[email protected]>
[ Upstream commit e85d29ba4b24f68e7a78cb85c55e754362eeb2de ]
DTC issues the following warnings when building xtfpga device trees:
/soc/flash@00000000/partition@0x0: unit name should not have leading "0x" /soc/flash@00000000/partition@0x6000000: unit name should not have leading "0x" /soc/flash@00000000/partition@0x6800000: unit name should not have leading "0x" /soc/flash@00000000/partition@0x7fe0000: unit name should not have leading "0x"
Drop leading 0x from flash partition unit names.
--- arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi | 8 ++++---- arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi | 8 ++++---- arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-)
arch/xtensa/boot/dts/xtfpga-flash-128m.dtsi +4 -4
@@ -8,19 +8,19 @@ reg = <0x00000000 0x08000000>; bank-width = <2>; device-width = <2>; - partition@0x0 { + partition@0 { label = "data"; reg = <0x00000000 0x06000000>; }; - partition@0x6000000 { + partition@6000000 { label = "boot loader area"; reg = <0x06000000 0x00800000>; }; - partition@0x6800000 { + partition@6800000 { label = "kernel image"; reg = <0x06800000 0x017e0000>; }; - partition@0x7fe0000 { + partition@7fe0000 { label = "boot environment"; reg = <0x07fe0000 0x00020000>; };
arch/xtensa/boot/dts/xtfpga-flash-16m.dtsi +4 -4
@@ -8,19 +8,19 @@ reg = <0x08000000 0x01000000>; bank-width = <2>; device-width = <2>; - partition@0x0 { + partition@0 { label = "boot loader area"; reg = <0x00000000 0x00400000>; }; - partition@0x400000 { + partition@400000 { label = "kernel image"; reg = <0x00400000 0x00600000>; }; - partition@0xa00000 { + partition@a00000 { label = "data"; reg = <0x00a00000 0x005e0000>; }; - partition@0xfe0000 { + partition@fe0000 { label = "boot environment"; reg = <0x00fe0000 0x00020000>; };
arch/xtensa/boot/dts/xtfpga-flash-4m.dtsi +2 -2
@@ -8,11 +8,11 @@ reg = <0x08000000 0x00400000>; bank-width = <2>; device-width = <2>; - partition@0x0 { + partition@0 { label = "boot loader area"; reg = <0x00000000 0x003f0000>; }; - partition@0x3f0000 { + partition@3f0000 { label = "boot environment"; reg = <0x003f0000 0x00010000>; };
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 105/285 MIPS: ingenic: correct unit node address
In reply to Greg Kroah-HartmanFrom: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 8931ddd8d6a55fcefb20f44a38ba42bb746f0b62 ]
Unit node addresses should not have leading 0x:
Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"
--- arch/mips/boot/dts/ingenic/jz4780.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/boot/dts/ingenic/jz4780.dtsi +1 -1
@@ -470,7 +470,7 @@ #address-cells = <1>; #size-cells = <1>; - eth0_addr: eth-mac-addr@0x22 { + eth0_addr: eth-mac-addr@22 { reg = <0x22 0x6>; }; };
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 106/285 Bluetooth: Fix use after free in hci_send_acl
In reply to Greg Kroah-HartmanFrom: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit f63d24baff787e13b723d86fe036f84bdbc35045 ]
This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm:
==================================================================
BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50
Read of size 8 at addr ffff88800e404818 by task bluetoothd/142
CPU: 0 PID: 142 Comm: bluetoothd Not tainted
5.17.0-rc5-00006-gda4022eeac1a #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
kasan_report.cold+0x7f/0x11b
hci_send_acl+0xaba/0xc50
l2cap_do_send+0x23f/0x3d0
l2cap_chan_send+0xc06/0x2cc0
l2cap_sock_sendmsg+0x201/0x2b0
sock_sendmsg+0xdc/0x110
sock_write_iter+0x20f/0x370
do_iter_readv_writev+0x343/0x690
do_iter_write+0x132/0x640
vfs_writev+0x198/0x570
do_writev+0x202/0x280
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3
0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05
<48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015
RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77
R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580
RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001
</TASK>
R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0
Allocated by task 45:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
hci_chan_create+0x9a/0x2f0
l2cap_conn_add.part.0+0x1a/0xdc0
l2cap_connect_cfm+0x236/0x1000
le_conn_complete_evt+0x15a7/0x1db0
hci_le_conn_complete_evt+0x226/0x2c0
hci_le_meta_evt+0x247/0x450
hci_event_packet+0x61b/0xe90
hci_rx_work+0x4d5/0xc50
process_one_work+0x8fb/0x15a0
worker_thread+0x576/0x1240
kthread+0x29d/0x340
ret_from_fork+0x1f/0x30
Freed by task 45:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xfb/0x130
kfree+0xac/0x350
hci_conn_cleanup+0x101/0x6a0
hci_conn_del+0x27e/0x6c0
hci_disconn_phylink_complete_evt+0xe0/0x120
hci_event_packet+0x812/0xe90
hci_rx_work+0x4d5/0xc50
process_one_work+0x8fb/0x15a0
worker_thread+0x576/0x1240
kthread+0x29d/0x340
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff88800c0f0500
The buggy address is located 24 bytes inside of
which belongs to the cache kmalloc-128 of size 128
The buggy address belongs to the page:
128-byte region [ffff88800c0f0500, ffff88800c0f0580)
flags: 0x100000000000200(slab|node=0|zone=1)
page:00000000fe45cd86 refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0xc0f0
raw: 0000000000000000 0000000080100010 00000001ffffffff
0000000000000000
raw: 0100000000000200 ffffea00003a2c80 dead000000000004
ffff8880078418c0
page dumped because: kasan: bad access detected
ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
Memory state around the buggy address:
>ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
==================================================================
ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb--- net/bluetooth/hci_event.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/bluetooth/hci_event.c +2 -1
@@ -5203,8 +5203,9 @@ static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev,hci_dev_lock (hdev); hcon =hci_conn_hash_lookup_handle (hdev, ev->phy_handle); -if (hcon) { +if (hcon && hcon->type ==AMP_LINK ) { hcon->state =BT_CLOSED ; +hci_disconn_cfm (hcon, ev->reason);hci_conn_del (hcon); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 107/285 netfilter: conntrack: revisit gc autotuning
In reply to Greg Kroah-HartmanFrom: Florian Westphal <[email protected]>
[ Upstream commit 2cfadb761d3d0219412fd8150faea60c7e863833 ]
as of commit 4608fdfc07e1
("netfilter: conntrack: collect all entries in one cycle") conntrack gc was changed to run every 2 minutes.
On systems where conntrack hash table is set to large value, most evictions happen from gc worker rather than the packet path due to hash table distribution.
This causes netlink event overflows when events are collected.
This change collects average expiry of scanned entries and reschedules to the average remaining value, within 1 to 60 second interval.
To avoid event overflows, reschedule after each bucket and add a limit for both run time and number of evictions per run.
If more entries have to be evicted, reschedule and restart 1 jiffy into the future.
--- net/netfilter/nf_conntrack_core.c | 85 ++++++++++++++++++++++++------- 1 file changed, 68 insertions(+), 17 deletions(-)
net/netfilter/nf_conntrack_core.c +68 -17
@@ -66,6 +66,8 @@ EXPORT_SYMBOL_GPL(nf_conntrack_hash);struct conntrack_gc_work {struct delayed_work dwork;u32 next_bucket; +u32 avg_timeout; +u32 start_time;bool exiting;bool early_drop; };
@@ -77,8 +79,19 @@ static __read_mostly bool nf_conntrack_locks_all;/* serialize hash resizes and nf_ct_iterate_cleanup */ static DEFINE_MUTEX (nf_conntrack_mutex); -#define GC_SCAN_INTERVAL (120u * HZ) +#define GC_SCAN_INTERVAL_MAX (60ul * HZ) +#define GC_SCAN_INTERVAL_MIN (1ul * HZ) + +/* clamp timeouts to this value (TCP unacked) */ +#define GC_SCAN_INTERVAL_CLAMP (300ul * HZ) + +/* large initial bias so that we don't scan often just because we have +* three entries with a 1s timeout. +*/ +#define GC_SCAN_INTERVAL_INIT INT_MAX +#define GC_SCAN_MAX_DURATION msecs_to_jiffies(10) +#define GC_SCAN_EXPIRED_MAX (64000u / HZ)#define MIN_CHAINLEN 8u#define MAX_CHAINLEN (32u - MIN_CHAINLEN)
@@ -1420,16 +1433,28 @@ static bool gc_worker_can_early_drop(const struct nf_conn *ct)static void gc_worker (struct work_struct *work) { -unsigned long end_time = jiffies +GC_SCAN_MAX_DURATION ;unsigned int i, hashsz, nf_conntrack_max95 =0 ; -unsigned long next_run =GC_SCAN_INTERVAL ; +u32 end_time, start_time = nfct_time_stamp;struct conntrack_gc_work *gc_work; +unsigned int expired_count =0 ; +unsigned long next_run; +s32 delta_time; + gc_work = container_of(work, struct conntrack_gc_work, dwork.work); i = gc_work->next_bucket;if (gc_work->early_drop) nf_conntrack_max95 = nf_conntrack_max /100u *95u ; +if (i ==0 ) { + gc_work->avg_timeout =GC_SCAN_INTERVAL_INIT ; + gc_work->start_time = start_time; + } + + next_run = gc_work->avg_timeout; + + end_time = start_time +GC_SCAN_MAX_DURATION ; + do { struct nf_conntrack_tuple_hash *h; struct hlist_nulls_head *ct_hash;
@@ -1446,6 +1471,7 @@ static void gc_worker(struct work_struct *work)hlist_nulls_for_each_entry_rcu (h, n, &ct_hash[i], hnnode) {struct nf_conntrack_net *cnet; +unsigned long expires;struct net *net; tmp =nf_ct_tuplehash_to_ctrack (h);
@@ -1455,11 +1481,29 @@ static void gc_worker(struct work_struct *work)continue ; } +if (expired_count >GC_SCAN_EXPIRED_MAX ) { +rcu_read_unlock (); + + gc_work->next_bucket = i; + gc_work->avg_timeout = next_run; + + delta_time = nfct_time_stamp - gc_work->start_time; + +/* re-sched immediately if total cycle time is exceeded */ + next_run = delta_time < (s32 )GC_SCAN_INTERVAL_MAX ; + goto early_exit; + } +if (nf_ct_is_expired (tmp)) {nf_ct_gc_expired (tmp); + expired_count++;continue ; } + expires =clamp (nf_ct_expires (tmp),GC_SCAN_INTERVAL_MIN ,GC_SCAN_INTERVAL_CLAMP ); + next_run += expires; + next_run /=2u ; +if (nf_conntrack_max95 ==0 ||gc_worker_skip_ct (tmp))continue ;
@@ -1477,8 +1521,10 @@ static void gc_worker(struct work_struct *work)continue ; } -if (gc_worker_can_early_drop (tmp)) +if (gc_worker_can_early_drop (tmp)) {nf_ct_kill (tmp); + expired_count++; + }nf_ct_put (tmp); }
@@ -1491,33 +1537,38 @@ static void gc_worker(struct work_struct *work)cond_resched (); i++; -if (time_after (jiffies, end_time) && i < hashsz) { + delta_time = nfct_time_stamp - end_time; +if (delta_time >0 && i < hashsz) { + gc_work->avg_timeout = next_run; gc_work->next_bucket = i; next_run =0 ; -break ; + goto early_exit; } }while (i < hashsz); + gc_work->next_bucket =0 ; + + next_run =clamp (next_run,GC_SCAN_INTERVAL_MIN ,GC_SCAN_INTERVAL_MAX ); + + delta_time =max_t (s32, nfct_time_stamp - gc_work->start_time,1 ); +if (next_run > (unsigned long )delta_time) + next_run -= delta_time; +else + next_run =1 ; + +early_exit:if (gc_work->exiting)return ; -/* -* Eviction will normally happen from the packet path, and not -* from this gc worker. -* -* This worker is only here to reap expired entries when system went -* idle after a busy period. -*/ -if (next_run) { +if (next_run) gc_work->early_drop = false; - gc_work->next_bucket =0 ; - } +queue_delayed_work (system_power_efficient_wq, &gc_work->dwork, next_run); }static void conntrack_gc_work_init (struct conntrack_gc_work *gc_work) { -INIT_DEFERRABLE_WORK (&gc_work->dwork, gc_worker); +INIT_DELAYED_WORK (&gc_work->dwork, gc_worker); gc_work->exiting = false; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 108/285 netlabel: fix out-of-bounds memory accesses
In reply to Greg Kroah-HartmanFrom: Wang Yufen <[email protected]>
[ Upstream commit f22881de730ebd472e15bcc2c0d1d46e36a87b9c ]
In calipso_map_cat_ntoh(), in the for loop, if the return value of netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses of bitmap[byte_offset] occurs.
The bug was found during fuzzing. The following is the fuzzing report
BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252 CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x21c/0x230 show_stack+0x1c/0x60 dump_stack_lvl+0x64/0x7c print_address_description.constprop.0+0x70/0x2d0 __kasan_report+0x158/0x16c kasan_report+0x74/0x120 __asan_load1+0x80/0xa0 netlbl_bitmap_walk+0x3c/0xd0 calipso_opt_getattr+0x1a8/0x230 calipso_sock_getattr+0x218/0x340 calipso_sock_getattr+0x44/0x60 netlbl_sock_getattr+0x44/0x80 selinux_netlbl_socket_setsockopt+0x138/0x170 selinux_socket_setsockopt+0x4c/0x60 security_socket_setsockopt+0x4c/0x90 __sys_setsockopt+0xbc/0x2b0 __arm64_sys_setsockopt+0x6c/0x84 invoke_syscall+0x64/0x190 el0_svc_common.constprop.0+0x88/0x200 do_el0_svc+0x88/0xa0 el0_svc+0x128/0x1b0 el0t_64_sync_handler+0x9c/0x120 el0t_64_sync+0x16c/0x170
--- net/netlabel/netlabel_kapi.c | 2 ++ 1 file changed, 2 insertions(+)
net/netlabel/netlabel_kapi.c +2 -0
@@ -885,6 +885,8 @@ int netlbl_bitmap_walk(const unsigned char *bitmap, u32 bitmap_len,unsigned char bitmask;unsigned char byte; +if (offset >= bitmap_len) +return -1 ; byte_offset = offset /8 ; byte = bitmap[byte_offset]; bit_spot = offset;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 109/285 ceph: fix inode reference leakage in ceph_get_snapdir()
In reply to Greg Kroah-HartmanFrom: Xiubo Li <[email protected]>
[ Upstream commit 322794d3355c33adcc4feace0045d85a8e4ed813 ]
The ceph_get_inode() will search for or insert a new inode into the hash for the given vino, and return a reference to it. If new is non-NULL, its reference is consumed.
We should release the reference when in error handing cases.
--- fs/ceph/inode.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
fs/ceph/inode.c +8 -2
@@ -87,13 +87,13 @@ struct inode *ceph_get_snapdir(struct inode *parent)if (!S_ISDIR (parent->i_mode)) {pr_warn_once ("bad snapdir parent type (mode=0%o)\n" , parent->i_mode); -return ERR_PTR (-ENOTDIR ); + goto err; }if (!(inode->i_state &I_NEW ) && !S_ISDIR (inode->i_mode)) {pr_warn_once ("bad snapdir inode type (mode=0%o)\n" , inode->i_mode); -return ERR_PTR (-ENOTDIR ); + goto err; } inode->i_mode = parent->i_mode;
@@ -113,6 +113,12 @@ struct inode *ceph_get_snapdir(struct inode *parent) }return inode; +err: +if ((inode->i_state &I_NEW )) +discard_new_inode (inode); +else +iput (inode); +return ERR_PTR (-ENOTDIR ); }const struct inode_operations ceph_file_iops = {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 110/285 ceph: fix memory leak in ceph_readdir when note_last_dentry returns error
In reply to Greg Kroah-HartmanFrom: Xiubo Li <[email protected]>
[ Upstream commit f639d9867eea647005dc824e0e24f39ffc50d4e4 ]
Reset the last_readdir at the same time, and add a comment explaining why we don't free last_readdir when dir_emit returns false.
--- fs/ceph/dir.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
fs/ceph/dir.c +10 -1
@@ -478,8 +478,11 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx) 2 : (fpos_off(rde->offset) + 1); err =note_last_dentry (dfi, rde->name, rde->name_len, next_offset); -if (err) +if (err) { +ceph_mdsc_put_request (dfi->last_readdir); + dfi->last_readdir =NULL ;return err; + } }else if (req->r_reply_info.dir_end) { dfi->next_offset =2 ;/* keep last name */
@@ -520,6 +523,12 @@ static int ceph_readdir(struct file *file, struct dir_context *ctx)if (!dir_emit (ctx, rde->name, rde->name_len,ceph_present_ino (inode->i_sb,le64_to_cpu (rde->inode.in->ino)),le32_to_cpu (rde->inode.in->mode) >>12 )) { +/* +* NOTE: Here no need to put the 'dfi->last_readdir', +* because when dir_emit stops us it's most likely +* doesn't have enough memory, etc. So for next readdir +* it will continue. +*/ dout ("filldir stopping us...\n" );return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 111/285 lib/Kconfig.debug: add ARCH dependency for FUNCTION_ALIGN option
In reply to Greg Kroah-HartmanFrom: Feng Tang <[email protected]>
[ Upstream commit 1bf18da62106225dbc47aab41efee2aeb99caccd ]
0Day robots reported there is compiling issue for 'csky' ARCH when CONFIG_DEBUG_FORCE_DATA_SECTION_ALIGNED is enabled [1]:
All errors (new ones prefixed by >>):
{standard input}: Assembler messages:
Quoted 1 line
Quoted 1 line
{standard input}:2277: Error: pcrel offset for branch to .LS000B too far (
0x3c)
Which was discussed in [2]. And as there is no solution for csky yet, add some dependency for this config to limit it to several ARCHs which have no compiling issue so far.
[1]. https://lore.kernel.org/lkml/[email protected]/
[2]. https://www.spinics.net/lists/linux-kbuild/msg30298.html
--- lib/Kconfig.debug | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
lib/Kconfig.debug +2 -1
@@ -416,7 +416,8 @@ config SECTION_MISMATCH_WARN_ONLY If unsure, say Y. config DEBUG_FORCE_FUNCTION_ALIGN_64B - bool "Force all function address 64B aligned" if EXPERT + bool "Force all function address 64B aligned" + depends on EXPERT && (X86_64 || ARM64 || PPC32 || PPC64 || ARC) help There are cases that a commit from one domain changes the function address alignment of other domains, and cause magic performance
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 112/285 init/main.c: return 1 from handled __setup() functions
In reply to Greg Kroah-HartmanFrom: Randy Dunlap <[email protected]>
[ Upstream commit f9a40b0890658330c83c95511f9d6b396610defc ]
initcall_blacklist() should return 1 to indicate that it handled its cmdline arguments.
set_debug_rodata() should return 1 to indicate that it handled its cmdline arguments. Print a warning if the option string is invalid.
This prevents these strings from being added to the 'init' program's environment as they are not init arguments/parameters.
--- init/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
init/main.c +4 -2
@@ -1189,7 +1189,7 @@ static int __init initcall_blacklist(char *str) } }while (str_entry); -return 0 ; +return 1 ; } static bool __init_or_module initcall_blacklisted(initcall_t fn)
@@ -1451,7 +1451,9 @@ static noinline void __init kernel_init_freeable(void);bool rodata_enabled__ro_after_init = true;static int __init set_debug_rodata (char *str) { -return strtobool (str, &rodata_enabled); +if (strtobool (str, &rodata_enabled)) +pr_warn ("Invalid option string for rodata: '%s'\n" , str); +return 1 ; }__setup ("rodata=" , set_debug_rodata);#endif
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 113/285 minix: fix bug when opening a file with O_DIRECT
In reply to Greg Kroah-HartmanFrom: Qinghua Jin <[email protected]>
[ Upstream commit 9ce3c0d26c42d279b6c378a03cd6a61d828f19ca ]
Testcase:
1. create a minix file system and mount it
2. open a file on the file system with O_RDWR|O_CREAT|O_TRUNC|O_DIRECT
3. open fails with -EINVAL but leaves an empty file behind. All other open() failures don't leave the failed open files behind.
It is hard to check the direct_IO op before creating the inode. Just as ext4 and btrfs do, this patch will resolve the issue by allowing to create the file with O_DIRECT but returning error when writing the file.
--- fs/minix/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/minix/inode.c +2 -1
@@ -447,7 +447,8 @@ static const struct address_space_operations minix_aops = { .writepage = minix_writepage, .write_begin = minix_write_begin, .write_end = generic_write_end, - .bmap = minix_bmap + .bmap = minix_bmap, + .direct_IO = noop_direct_IO };static const struct inode_operations minix_symlink_inode_operations = {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 114/285 clk: si5341: fix reported clk_rate when output divider is 2
In reply to Greg Kroah-HartmanFrom: Adam Wujek <[email protected]>
[ Upstream commit 2a8b539433e111c4de364237627ef219d2f6350a ]
SI5341_OUT_CFG_RDIV_FORCE2 shall be checked first to distinguish whether a divider for a given output is set to 2 (SI5341_OUT_CFG_RDIV_FORCE2 is set) or the output is disabled (SI5341_OUT_CFG_RDIV_FORCE2 not set, SI5341_OUT_R_REG is set 0).
Before the change, divider set to 2 (SI5341_OUT_R_REG set to 0) was interpreted as output is disabled.
--- drivers/clk/clk-si5341.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/clk/clk-si5341.c +9 -7
@@ -798,6 +798,15 @@ static unsigned long si5341_output_clk_recalc_rate(struct clk_hw *hw,u32 r_divider;u8 r[3 ]; + err =regmap_read (output->data->regmap, +SI5341_OUT_CONFIG (output), &val); +if (err <0 ) +return err; + +/* If SI5341_OUT_CFG_RDIV_FORCE2 is set, r_divider is 2 */ +if (val &SI5341_OUT_CFG_RDIV_FORCE2 ) +return parent_rate /2 ; + err =regmap_bulk_read (output->data->regmap,SI5341_OUT_R_REG (output), r,3 );if (err <0 )
@@ -814,13 +823,6 @@ static unsigned long si5341_output_clk_recalc_rate(struct clk_hw *hw, r_divider +=1 ; r_divider <<=1 ; - err =regmap_read (output->data->regmap, -SI5341_OUT_CONFIG (output), &val); -if (err <0 ) -return err; - -if (val &SI5341_OUT_CFG_RDIV_FORCE2 ) - r_divider =2 ;return parent_rate / r_divider; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 115/285 clk: mediatek: Fix memory leaks on probe
In reply to Greg Kroah-HartmanFrom: José Expósito <[email protected]>
[ Upstream commit 7a688c91d3fd54c53e7a9edd6052cdae98dd99d8 ]
Handle the error branches to free memory where required.
Addresses-Coverity-ID: 1491825 ("Resource leak")
--- drivers/clk/mediatek/clk-mt8192.c | 36 +++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-)
drivers/clk/mediatek/clk-mt8192.c +30 -6
@@ -1236,9 +1236,17 @@ static int clk_mt8192_infra_probe(struct platform_device *pdev) r =mtk_clk_register_gates (node, infra_clks,ARRAY_SIZE (infra_clks), clk_data);if (r) -return r; + goto free_clk_data; + + r =of_clk_add_provider (node, of_clk_src_onecell_get, clk_data); +if (r) + goto free_clk_data; + +return r; -return of_clk_add_provider (node, of_clk_src_onecell_get, clk_data); +free_clk_data: +mtk_free_clk_data (clk_data); +return r; }static int clk_mt8192_peri_probe (struct platform_device *pdev)
@@ -1253,9 +1261,17 @@ static int clk_mt8192_peri_probe(struct platform_device *pdev) r =mtk_clk_register_gates (node, peri_clks,ARRAY_SIZE (peri_clks), clk_data);if (r) -return r; + goto free_clk_data; + + r =of_clk_add_provider (node, of_clk_src_onecell_get, clk_data); +if (r) + goto free_clk_data; -return of_clk_add_provider (node, of_clk_src_onecell_get, clk_data); +return r; + +free_clk_data: +mtk_free_clk_data (clk_data); +return r; }static int clk_mt8192_apmixed_probe (struct platform_device *pdev)
@@ -1271,9 +1287,17 @@ static int clk_mt8192_apmixed_probe(struct platform_device *pdev)mtk_clk_register_plls (node, plls,ARRAY_SIZE (plls), clk_data); r =mtk_clk_register_gates (node, apmixed_clks,ARRAY_SIZE (apmixed_clks), clk_data);if (r) -return r; + goto free_clk_data; -return of_clk_add_provider (node, of_clk_src_onecell_get, clk_data); + r =of_clk_add_provider (node, of_clk_src_onecell_get, clk_data); +if (r) + goto free_clk_data; + +return r; + +free_clk_data: +mtk_free_clk_data (clk_data); +return r; }static const struct of_device_id of_match_clk_mt8192[] = {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 116/285 staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances
In reply to Greg Kroah-HartmanFrom: Stefan Wahren <[email protected]>
[ Upstream commit aa899e686d442c63d50f4d369cc02dbbf0941cb0 ]
vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances.
--- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +3 -0
@@ -1209,6 +1209,9 @@ int vchiq_dump_platform_instances(void *dump_context)int len;int i; +if (!state) +return -ENOTCONN ; +/* * There is no list of instances, so instead scan all services, * marking those that have been dumped.
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 117/285 staging: vchiq_core: handle NULL result of find_service_by_handle
In reply to Greg Kroah-HartmanFrom: Stefan Wahren <[email protected]>
[ Upstream commit ca225857faf237234d2fffe5d1919467dfadd822 ]
In case of an invalid handle the function find_servive_by_handle returns NULL. So take care of this and avoid a NULL pointer dereference.
--- .../staging/vc04_services/interface/vchiq_arm/vchiq_core.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c +6 -0
@@ -2306,6 +2306,9 @@ void vchiq_msg_queue_push(unsigned int handle, struct vchiq_header *header)struct vchiq_service *service =find_service_by_handle (handle);int pos; +if (!service) +return ; +while (service->msg_queue_write == service->msg_queue_read +VCHIQ_MAX_SLOTS ) {if (wait_for_completion_interruptible (&service->msg_queue_pop))
@@ -2326,6 +2329,9 @@ struct vchiq_header *vchiq_msg_hold(unsigned int handle)struct vchiq_header *header;int pos; +if (!service) +return NULL ; +if (service->msg_queue_write == service->msg_queue_read)return NULL ;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 118/285 phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use
In reply to Greg Kroah-HartmanFrom: Amjad Ouled-Ameur <[email protected]>
[ Upstream commit 2f87727130ce17ffefecd0895eeebf22d5a36f6f ]
Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices.
reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm().
--- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/phy/amlogic/phy-meson-gxl-usb2.c +4 -1
@@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy)return ret; ret =clk_prepare_enable (priv->clk); -if (ret) +if (ret) { +reset_control_rearm (priv->reset);return ret; + }return 0 ; }
@@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)struct phy_meson_gxl_usb2_priv *priv =phy_get_drvdata (phy);clk_disable_unprepare (priv->clk); +reset_control_rearm (priv->reset);return 0 ; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 119/285 phy: amlogic: meson8b-usb2: Use dev_err_probe()
In reply to Greg Kroah-HartmanFrom: Amjad Ouled-Ameur <[email protected]>
[ Upstream commit 6466ba1898d415b527e1013bd8551a6fdfece94c ]
Use the existing dev_err_probe() helper instead of open-coding the same operation.
--- drivers/phy/amlogic/phy-meson8b-usb2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/phy/amlogic/phy-meson8b-usb2.c +3 -2
@@ -265,8 +265,9 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)return PTR_ERR (priv->clk_usb); priv->reset =devm_reset_control_get_optional_shared (&pdev->dev,NULL ); -if (PTR_ERR (priv->reset) == -EPROBE_DEFER ) -return PTR_ERR (priv->reset); +if (IS_ERR (priv->reset)) +return dev_err_probe (&pdev->dev,PTR_ERR (priv->reset), +"Failed to get the reset line" ); priv->dr_mode =of_usb_get_dr_mode_by_phy (pdev->dev.of_node,-1 );if (priv->dr_mode ==USB_DR_MODE_UNKNOWN ) {
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 120/285 phy: amlogic: meson8b-usb2: fix shared reset control use
In reply to Greg Kroah-HartmanFrom: Amjad Ouled-Ameur <[email protected]>
[ Upstream commit 6f1dedf089ab1a4f03ea7aadc3c4a99885b4b4a0 ]
Use reset_control_rearm() call if an error occurs in case phy_meson8b_usb2_power_on() fails after reset() has been called, or in case phy_meson8b_usb2_power_off() is called i.e the resource is no longer used and the reset line may be triggered again by other devices.
reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm().
--- drivers/phy/amlogic/phy-meson8b-usb2.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/phy/amlogic/phy-meson8b-usb2.c +4 -0
@@ -154,6 +154,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy) ret =clk_prepare_enable (priv->clk_usb_general);if (ret) {dev_err (&phy->dev,"Failed to enable USB general clock\n" ); +reset_control_rearm (priv->reset);return ret; }
@@ -161,6 +162,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)if (ret) {dev_err (&phy->dev,"Failed to enable USB DDR clock\n" );clk_disable_unprepare (priv->clk_usb_general); +reset_control_rearm (priv->reset);return ret; }
@@ -199,6 +201,7 @@ static int phy_meson8b_usb2_power_on(struct phy *phy)dev_warn (&phy->dev,"USB ID detect failed!\n" );clk_disable_unprepare (priv->clk_usb);clk_disable_unprepare (priv->clk_usb_general); +reset_control_rearm (priv->reset);return -EINVAL ; } }
@@ -218,6 +221,7 @@ static int phy_meson8b_usb2_power_off(struct phy *phy)clk_disable_unprepare (priv->clk_usb);clk_disable_unprepare (priv->clk_usb_general); +reset_control_rearm (priv->reset);/* power off the PHY by putting it into reset mode */ regmap_update_bits(priv->regmap, REG_CTRL, REG_CTRL_POWER_ON_RESET,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 121/285 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
In reply to Greg Kroah-HartmanFrom: Sascha Hauer <[email protected]>
[ Upstream commit ff3187eabb5ce478d15b6ed62eb286756adefac3 ]
The pixel clocks dclk_vop[012] can be clocked from hpll, vpll, gpll or cpll. gpll and cpll also drive many other clocks, so changing the dclk_vop[012] clocks could change these other clocks as well. Drop CLK_SET_RATE_PARENT to fix that. With this change the VOP2 driver can only adjust the pixel clocks with the divider between the PLL and the dclk_vop[012] which means the user may have to adjust the PLL clock to a suitable rate using the assigned-clock-rate device tree property.
--- drivers/clk/rockchip/clk-rk3568.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/clk/rockchip/clk-rk3568.c +3 -3
@@ -1038,13 +1038,13 @@ static struct rockchip_clk_branch rk3568_clk_branches[] __initdata = { RK3568_CLKGATE_CON(20), 8, GFLAGS),GATE (HCLK_VOP ,"hclk_vop" ,"hclk_vo" ,0 ,RK3568_CLKGATE_CON (20 ),9 ,GFLAGS ), -COMPOSITE (DCLK_VOP0 ,"dclk_vop0" , hpll_vpll_gpll_cpll_p,CLK_SET_RATE_PARENT |CLK_SET_RATE_NO_REPARENT , +COMPOSITE (DCLK_VOP0 ,"dclk_vop0" , hpll_vpll_gpll_cpll_p,CLK_SET_RATE_NO_REPARENT ,RK3568_CLKSEL_CON (39 ),10 ,2 ,MFLAGS ,0 ,8 ,DFLAGS ,RK3568_CLKGATE_CON (20 ),10 ,GFLAGS ), -COMPOSITE (DCLK_VOP1 ,"dclk_vop1" , hpll_vpll_gpll_cpll_p,CLK_SET_RATE_PARENT |CLK_SET_RATE_NO_REPARENT , +COMPOSITE (DCLK_VOP1 ,"dclk_vop1" , hpll_vpll_gpll_cpll_p,CLK_SET_RATE_NO_REPARENT ,RK3568_CLKSEL_CON (40 ),10 ,2 ,MFLAGS ,0 ,8 ,DFLAGS ,RK3568_CLKGATE_CON (20 ),11 ,GFLAGS ), -COMPOSITE (DCLK_VOP2 ,"dclk_vop2" , hpll_vpll_gpll_cpll_p,0 , +COMPOSITE (DCLK_VOP2 ,"dclk_vop2" , hpll_vpll_gpll_cpll_p,CLK_SET_RATE_NO_REPARENT ,RK3568_CLKSEL_CON (41 ),10 ,2 ,MFLAGS ,0 ,8 ,DFLAGS ,RK3568_CLKGATE_CON (20 ),12 ,GFLAGS ), GATE(CLK_VOP_PWM, "clk_vop_pwm", "xin24m", 0,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 122/285 cpufreq: CPPC: Fix performance/frequency conversion
In reply to Greg Kroah-HartmanFrom: Pierre Gondois <[email protected]>
[ Upstream commit ec1c7ad47664f964c1101fe555b6fde0cb124b38 ]
CPUfreq governors request CPU frequencies using information on current CPU usage. The CPPC driver converts them to performance requests. Frequency targets are computed as:
target_freq = (util / cpu_capacity) * max_freqtarget_freq is then clamped between [policy->min, policy->max].
The CPPC driver converts performance values to frequencies (and vice-versa) using cppc_cpufreq_perf_to_khz() and cppc_cpufreq_khz_to_perf(). These functions both use two different factors depending on the range of the input value. For cppc_cpufreq_khz_to_perf():
- (NOMINAL_PERF / NOMINAL_FREQ) or
- (LOWEST_PERF / LOWEST_FREQ)
and for cppc_cpufreq_perf_to_khz():
- (NOMINAL_FREQ / NOMINAL_PERF) or
- ((NOMINAL_PERF - LOWEST_FREQ) / (NOMINAL_PERF - LOWEST_PERF))
This means:
1- the functions are not inverse for some values:
(perf_to_khz(khz_to_perf(x)) != x)
2- cppc_cpufreq_perf_to_khz(LOWEST_PERF) can sometimes give
a different value from LOWEST_FREQ due to integer approximation
3- it is implied that performance and frequency are proportional
(NOMINAL_FREQ / NOMINAL_PERF) == (LOWEST_PERF / LOWEST_FREQ)
This patch changes the conversion functions to an affine function. This fixes the 3 points above.
--- drivers/cpufreq/cppc_cpufreq.c | 43 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 22 deletions(-)
drivers/cpufreq/cppc_cpufreq.c +21 -22
@@ -303,52 +303,48 @@ static u64 cppc_get_dmi_max_khz(void)/* * If CPPC lowest_freq and nominal_freq registers are exposed then we can -* use them to convert perf to freq and vice versa -* -* If the perf/freq point lies between Nominal and Lowest, we can treat -* (Low perf, Low freq) and (Nom Perf, Nom freq) as 2D co-ordinates of a line -* and extrapolate the rest -* For perf/freq > Nominal, we use the ratio perf:freq at Nominal for conversion +* use them to convert perf to freq and vice versa. The conversion is +* extrapolated as an affine function passing by the 2 points: +* - (Low perf, Low freq) +* - (Nominal perf, Nominal perf) */ static unsigned int cppc_cpufreq_perf_to_khz (struct cppc_cpudata *cpu_data,unsigned int perf) {struct cppc_perf_caps *caps = &cpu_data->perf_caps; +s64 retval, offset =0 ;static u64 max_khz;u64 mul, div;if (caps->lowest_freq && caps->nominal_freq) { -if (perf >= caps->nominal_perf) { - mul = caps->nominal_freq; - div = caps->nominal_perf; - }else { - mul = caps->nominal_freq - caps->lowest_freq; - div = caps->nominal_perf - caps->lowest_perf; - } + mul = caps->nominal_freq - caps->lowest_freq; + div = caps->nominal_perf - caps->lowest_perf; + offset = caps->nominal_freq -div64_u64 (caps->nominal_perf * mul, div); }else {if (!max_khz) max_khz =cppc_get_dmi_max_khz (); mul = max_khz; div = caps->highest_perf; } -return (u64 )perf * mul / div; + + retval = offset +div64_u64 (perf * mul, div); +if (retval >=0 ) +return retval; +return 0 ; }static unsigned int cppc_cpufreq_khz_to_perf (struct cppc_cpudata *cpu_data,unsigned int freq) {struct cppc_perf_caps *caps = &cpu_data->perf_caps; +s64 retval, offset =0 ;static u64 max_khz;u64 mul, div;if (caps->lowest_freq && caps->nominal_freq) { -if (freq >= caps->nominal_freq) { - mul = caps->nominal_perf; - div = caps->nominal_freq; - }else { - mul = caps->lowest_perf; - div = caps->lowest_freq; - } + mul = caps->nominal_perf - caps->lowest_perf; + div = caps->nominal_freq - caps->lowest_freq; + offset = caps->nominal_perf -div64_u64 (caps->nominal_freq * mul, div); }else {if (!max_khz) max_khz =cppc_get_dmi_max_khz ();
@@ -356,7 +352,10 @@ static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data, div = max_khz; } -return (u64 )freq * mul / div; + retval = offset +div64_u64 (freq * mul, div); +if (retval >=0 ) +return retval; +return 0 ; } static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 123/285 opp: Expose of-nodes name in debugfs
In reply to Greg Kroah-HartmanFrom: Viresh Kumar <[email protected]>
[ Upstream commit 021dbecabc93b1610b5db989d52a94e0c6671136 ]
It is difficult to find which OPPs are active at the moment, specially if there are multiple OPPs with same frequency available in the device tree (controlled by supported hardware feature).
Expose name of the DT node to find out the exact OPP.
While at it, also expose level field.
--- drivers/opp/debugfs.c | 5 +++++ drivers/opp/opp.h | 1 + 2 files changed, 6 insertions(+)
drivers/opp/debugfs.c +5 -0
@@ -10,6 +10,7 @@#include <linux/debugfs.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/of.h> #include <linux/init.h> #include <linux/limits.h> #include <linux/slab.h>
@@ -131,9 +132,13 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)debugfs_create_bool ("suspend" ,S_IRUGO , d, &opp->suspend);debugfs_create_u32 ("performance_state" ,S_IRUGO , d, &opp->pstate);debugfs_create_ulong ("rate_hz" ,S_IRUGO , d, &opp->rate); +debugfs_create_u32 ("level" ,S_IRUGO , d, &opp->level);debugfs_create_ulong ("clock_latency_ns" ,S_IRUGO , d, &opp->clock_latency_ns); + opp->of_name =of_node_full_name (opp->np); +debugfs_create_str ("of_name" ,S_IRUGO , d, (char **)&opp->of_name); +opp_debug_create_supplies (opp, opp_table, d);opp_debug_create_bw (opp, opp_table, d);
drivers/opp/opp.h +1 -0
@@ -96,6 +96,7 @@ struct dev_pm_opp {#ifdef CONFIG_DEBUG_FS struct dentry *dentry; +const char *of_name;#endif };
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 124/285 staging: wfx: fix an error handling in wfx_init_common()
In reply to Greg Kroah-HartmanFrom: Xiaoke Wang <[email protected]>
[ Upstream commit 60f1d3c92dc1ef1026e5b917a329a7fa947da036 ]
One error handler of wfx_init_common() return without calling ieee80211_free_hw(hw), which may result in memory leak. And I add one err label to unify the error handler, which is useful for the subsequent changes.
--- drivers/staging/wfx/main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/staging/wfx/main.c +6 -1
@@ -322,7 +322,8 @@ struct wfx_dev *wfx_init_common(struct device *dev, wdev->pdata.gpio_wakeup =devm_gpiod_get_optional (dev,"wakeup" ,GPIOD_OUT_LOW );if (IS_ERR (wdev->pdata.gpio_wakeup)) -return NULL ; + goto err; +if (wdev->pdata.gpio_wakeup)gpiod_set_consumer_name (wdev->pdata.gpio_wakeup,"wfx wakeup" );
@@ -341,6 +342,10 @@ struct wfx_dev *wfx_init_common(struct device *dev,return NULL ;return wdev; + +err: +ieee80211_free_hw (hw); +return NULL ; }int wfx_probe (struct wfx_dev *wdev)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 125/285 w1: w1_therm: fixes w1_seq for ds28ea00 sensors
In reply to Greg Kroah-HartmanFrom: Lucas Denefle <[email protected]>
[ Upstream commit 41a92a89eee819298f805c40187ad8b02bb53426 ]
w1_seq was failing due to several devices responding to the CHAIN_DONE at the same time. Now properly selects the current device in the chain with MATCH_ROM. Also acknowledgment was read twice.
--- drivers/w1/slaves/w1_therm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/w1/slaves/w1_therm.c +6 -2
@@ -2090,16 +2090,20 @@ static ssize_t w1_seq_show(struct device *device,if (sl->reg_num.id == reg_num->id) seq = i; +if (w1_reset_bus (sl->master)) + goto error; + +/* Put the device into chain DONE state */ +w1_write_8 (sl->master,W1_MATCH_ROM ); +w1_write_block (sl->master, (u8 *)&rn,8 );w1_write_8 (sl->master,W1_42_CHAIN );w1_write_8 (sl->master,W1_42_CHAIN_DONE );w1_write_8 (sl->master,W1_42_CHAIN_DONE_INV ); -w1_read_block (sl->master, &ack,sizeof (ack));/* check for acknowledgment */ ack =w1_read_8 (sl->master);if (ack !=W1_42_SUCCESS_CONFIRM_BYTE ) goto error; - }/* Exit from CHAIN state */
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 126/285 NFSv4.2: fix reference count leaks in _nfs42_proc_copy_notify()
In reply to Greg Kroah-HartmanFrom: Xin Xiong <[email protected]>
[ Upstream commit b7f114edd54326f730a754547e7cfb197b5bc132 ]
[You don't often get email from [email protected]. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
The reference counting issue happens in two error paths in the function _nfs42_proc_copy_notify(). In both error paths, the function simply returns the error code and forgets to balance the refcount of object ctx, bumped by get_nfs_open_context() earlier, which may cause refcount leaks.
Fix it by balancing refcount of the ctx object before the function returns in both error paths.
--- fs/nfs/nfs42proc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
fs/nfs/nfs42proc.c +6 -3
@@ -592,8 +592,10 @@ static int _nfs42_proc_copy_notify(struct file *src, struct file *dst, ctx =get_nfs_open_context (nfs_file_open_context (src)); l_ctx =nfs_get_lock_context (ctx); -if (IS_ERR (l_ctx)) -return PTR_ERR (l_ctx); +if (IS_ERR (l_ctx)) { + status =PTR_ERR (l_ctx); + goto out; + } status =nfs4_set_rw_stateid (&args->cna_src_stateid, ctx, l_ctx,FMODE_READ );
@@ -601,7 +603,7 @@ static int _nfs42_proc_copy_notify(struct file *src, struct file *dst,if (status) {if (status == -EAGAIN ) status = -NFS4ERR_BAD_STATEID ; -return status; + goto out; } status = nfs4_call_sync(src_server->client, src_server, &msg,
@@ -610,6 +612,7 @@ static int _nfs42_proc_copy_notify(struct file *src, struct file *dst,if (status == -ENOTSUPP ) src_server->caps &= ~NFS_CAP_COPY_NOTIFY ; +out:put_nfs_open_context (nfs_file_open_context (src));return status; }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 127/285 NFSv4: Protect the state recovery thread against direct reclaim
In reply to Greg Kroah-HartmanFrom: Trond Myklebust <[email protected]>
[ Upstream commit 3e17898aca293a24dae757a440a50aa63ca29671 ]
If memory allocation triggers a direct reclaim from the state recovery thread, then we can deadlock. Use memalloc_nofs_save/restore to ensure that doesn't happen.
--- fs/nfs/nfs4state.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
fs/nfs/nfs4state.c +12 -0
@@ -49,6 +49,7 @@#include <linux/workqueue.h> #include <linux/bitops.h> #include <linux/jiffies.h> +#include <linux/sched/mm.h> #include <linux/sunrpc/clnt.h>
@@ -2560,9 +2561,17 @@ static void nfs4_layoutreturn_any_run(struct nfs_client *clp)static void nfs4_state_manager (struct nfs_client *clp) { +unsigned int memflags;int status =0 ;const char *section ="" , *section_sep ="" ; +/* +* State recovery can deadlock if the direct reclaim code tries +* start NFS writeback. So ensure memory allocations are all +* GFP_NOFS. +*/ + memflags =memalloc_nofs_save (); +/* Ensure exclusive access to NFSv4 state */ do { trace_nfs4_state_mgr(clp);
@@ -2657,6 +2666,7 @@ static void nfs4_state_manager(struct nfs_client *clp)clear_bit (NFS4CLNT_RECLAIM_NOGRACE , &clp->cl_state); } +memalloc_nofs_restore (memflags);nfs4_end_drain_session (clp);nfs4_clear_state_manager_bit (clp);
@@ -2674,6 +2684,7 @@ static void nfs4_state_manager(struct nfs_client *clp)return ;if (test_and_set_bit (NFS4CLNT_MANAGER_RUNNING , &clp->cl_state) !=0 )return ; + memflags =memalloc_nofs_save (); }while (refcount_read (&clp->cl_count) >1 && !signalled ()); goto out_drain;
@@ -2686,6 +2697,7 @@ static void nfs4_state_manager(struct nfs_client *clp) clp->cl_hostname, -status);ssleep (1 ); out_drain: +memalloc_nofs_restore (memflags);nfs4_end_drain_session (clp);nfs4_clear_state_manager_bit (clp); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 128/285 habanalabs: fix possible memory leak in MMU DR fini
In reply to Greg Kroah-HartmanFrom: Ohad Sharabi <[email protected]>
[ Upstream commit eb85eec858c1a5c11d3a0bff403f6440b05b40dc ]
This patch fixes what seems to be copy paste error.
We will have a memory leak if the host-resident shadow is NULL (which will likely happen as the DR and HR are not dependent).
--- drivers/misc/habanalabs/common/mmu/mmu_v1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/habanalabs/common/mmu/mmu_v1.c +1 -1
@@ -467,7 +467,7 @@ static void hl_mmu_v1_fini(struct hl_device *hdev) {/* MMU H/W fini was already done in device hw_fini() */ -if (!ZERO_OR_NULL_PTR (hdev->mmu_priv.hr.mmu_shadow_hop0)) { +if (!ZERO_OR_NULL_PTR (hdev->mmu_priv.dr.mmu_shadow_hop0)) {kvfree (hdev->mmu_priv.dr.mmu_shadow_hop0);gen_pool_destroy (hdev->mmu_priv.dr.mmu_pgt_pool);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 129/285 habanalabs: reject host map with mmu disabled
In reply to Greg Kroah-HartmanFrom: Oded Gabbay <[email protected]>
[ Upstream commit 9a79e3e4a3637c07352d9723b825490a1b04391f ]
This is not something we can do a workaround. It is clearly an error and we should notify the user that it is an error.
--- drivers/misc/habanalabs/common/memory.c | 30 +++++++++---------------- 1 file changed, 11 insertions(+), 19 deletions(-)
drivers/misc/habanalabs/common/memory.c +11 -19
@@ -1973,16 +1973,15 @@ static int export_dmabuf_from_handle(struct hl_ctx *ctx, u64 handle, int flags,static int mem_ioctl_no_mmu (struct hl_fpriv *hpriv,union hl_mem_args *args) {struct hl_device *hdev = hpriv->hdev; -struct hl_ctx *ctx = hpriv->ctx;u64 block_handle, device_addr =0 ; +struct hl_ctx *ctx = hpriv->ctx;u32 handle =0 , block_size; -int rc, dmabuf_fd = -EBADF ; +int rc;switch (args->in.op) {case HL_MEM_OP_ALLOC :if (args->in.alloc.mem_size ==0 ) { -dev_err (hdev->dev, -"alloc size must be larger than 0\n" ); +dev_err (hdev->dev,"alloc size must be larger than 0\n" ); rc = -EINVAL ; goto out; }
@@ -2003,15 +2002,14 @@ static int mem_ioctl_no_mmu(struct hl_fpriv *hpriv, union hl_mem_args *args)case HL_MEM_OP_MAP :if (args->in.flags &HL_MEM_USERPTR ) { - device_addr = args->in.map_host.host_virt_addr; - rc =0 ; +dev_err (hdev->dev,"Failed to map host memory when MMU is disabled\n" ); + rc = -EPERM ; }else { - rc =get_paddr_from_handle (ctx, &args->in, - &device_addr); + rc =get_paddr_from_handle (ctx, &args->in, &device_addr); +memset (args,0 ,sizeof (*args)); + args->out.device_virt_addr = device_addr; } -memset (args,0 ,sizeof (*args)); - args->out.device_virt_addr = device_addr;break ;case HL_MEM_OP_UNMAP :
@@ -2019,20 +2017,14 @@ static int mem_ioctl_no_mmu(struct hl_fpriv *hpriv, union hl_mem_args *args)break ;case HL_MEM_OP_MAP_BLOCK : - rc =map_block (hdev, args->in.map_block.block_addr, - &block_handle, &block_size); + rc =map_block (hdev, args->in.map_block.block_addr, &block_handle, &block_size); args->out.block_handle = block_handle; args->out.block_size = block_size;break ;case HL_MEM_OP_EXPORT_DMABUF_FD : - rc =export_dmabuf_from_addr (ctx, - args->in.export_dmabuf_fd.handle, - args->in.export_dmabuf_fd.mem_size, - args->in.flags, - &dmabuf_fd); -memset (args,0 ,sizeof (*args)); - args->out.fd = dmabuf_fd; +dev_err (hdev->dev,"Failed to export dma-buf object when MMU is disabled\n" ); + rc = -EPERM ;break ;default :
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 130/285 xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
In reply to Greg Kroah-HartmanFrom: Dongli Zhang <[email protected]>
[ Upstream commit eed05744322da07dd7e419432dcedf3c2e017179 ]
The sched_clock() can be used very early since commit 857baa87b642 ("sched/clock: Enable sched clock early"). In addition, with commit 38669ba205d1 ("x86/xen/time: Output xen sched_clock time from 0"), kdump kernel in Xen HVM guest may panic at very early stage when accessing &__this_cpu_read(xen_vcpu)->time as in below:
setup_arch()
-> init_hypervisor_platform()
-> x86_init.hyper.init_platform = xen_hvm_guest_init()
-> xen_hvm_init_time_ops()
-> xen_clocksource_read()
-> src = &__this_cpu_read(xen_vcpu)->time;This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info' embedded inside 'shared_info' during early stage until xen_vcpu_setup() is used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.
However, when Xen HVM guest panic on vcpu >= 32, since xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.
This patch calls xen_hvm_init_time_ops() again later in xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is registered when the boot vcpu is >= 32.
This issue can be reproduced on purpose via below command at the guest side when kdump/kexec is enabled:
"taskset -c 33 echo c > /proc/sysrq-trigger"
The bugfix for PVM is not implemented due to the lack of testing environment.
[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]
--- arch/x86/xen/smp_hvm.c | 6 ++++++ arch/x86/xen/time.c | 24 +++++++++++++++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-)
arch/x86/xen/smp_hvm.c +6 -0
@@ -19,6 +19,12 @@ static void __init xen_hvm_smp_prepare_boot_cpu(void)*/ xen_vcpu_setup (0 ); +/* +* Called again in case the kernel boots on vcpu >= MAX_VIRT_CPUS. +* Refer to comments in xen_hvm_init_time_ops(). +*/ +xen_hvm_init_time_ops (); +/* * The alternative logic (which patches the unlock/lock) runs before * the smp bootup up code is activated. Hence we need to set this up
arch/x86/xen/time.c +23 -1
@@ -558,6 +558,11 @@ static void xen_hvm_setup_cpu_clockevents(void)void __init xen_hvm_init_time_ops (void ) { +static bool hvm_time_initialized; + +if (hvm_time_initialized) +return ; +/* * vector callback is needed otherwise we cannot receive interrupts * on cpu > 0 and at this point we don't know how many cpus are
@@ -567,7 +572,22 @@ void __init xen_hvm_init_time_ops(void)return ;if (!xen_feature (XENFEAT_hvm_safe_pvclock)) { -pr_info ("Xen doesn't support pvclock on HVM, disable pv timer" ); +pr_info_once ("Xen doesn't support pvclock on HVM, disable pv timer" ); +return ; + } + +/* +* Only MAX_VIRT_CPUS 'vcpu_info' are embedded inside 'shared_info'. +* The __this_cpu_read(xen_vcpu) is still NULL when Xen HVM guest +* boots on vcpu >= MAX_VIRT_CPUS (e.g., kexec), To access +* __this_cpu_read(xen_vcpu) via xen_clocksource_read() will panic. +* +* The xen_hvm_init_time_ops() should be called again later after +* __this_cpu_read(xen_vcpu) is available. +*/ +if (!__this_cpu_read (xen_vcpu)) { +pr_info ("Delay xen_init_time_common() as kernel is running on vcpu=%d\n" , +xen_vcpu_nr (0 ));return ; }
@@ -577,6 +597,8 @@ void __init xen_hvm_init_time_ops(void) x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents; x86_platform.set_wallclock = xen_set_wallclock; + + hvm_time_initialized = true; }#endif
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 131/285 clk: ti: Preserve node in ti_dt_clocks_register()
In reply to Greg Kroah-HartmanFrom: Tony Lindgren <[email protected]>
[ Upstream commit 80864594ff2ad002e2755daf97d46ff0c86faf1f ]
In preparation for making use of the clock-output-names, we want to keep node around in ti_dt_clocks_register().
This change should not needed as a fix currently.
--- drivers/clk/ti/clk.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/clk/ti/clk.c +8 -5
@@ -131,7 +131,7 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)void __init ti_dt_clocks_register (struct ti_dt_clk oclks[]) {struct ti_dt_clk *c; -struct device_node *node, *parent; +struct device_node *node, *parent, *child;struct clk *clk;struct of_phandle_args clkspec;char buf[64 ];
@@ -171,10 +171,13 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[]) node =of_find_node_by_name (NULL , buf);if (num_args && compat_mode) { parent = node; - node =of_get_child_by_name (parent,"clock" ); -if (!node) - node =of_get_child_by_name (parent,"clk" ); -of_node_put (parent); + child =of_get_child_by_name (parent,"clock" ); +if (!child) + child =of_get_child_by_name (parent,"clk" ); +if (child) { +of_node_put (parent); + node = child; + } } clkspec.np = node;
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 132/285 clk: Enforce that disjoints limits are invalid
In reply to Greg Kroah-HartmanFrom: Maxime Ripard <[email protected]>
[ Upstream commit 10c46f2ea914202482d19cf80dcc9c321c9ff59b ]
If we were to have two users of the same clock, doing something like:
clk_set_rate_range(user1, 1000, 2000);clk_set_rate_range(user2, 3000, 4000);
The second call would fail with -EINVAL, preventing from getting in a situation where we end up with impossible limits.
However, this is never explicitly checked against and enforced, and works by relying on an undocumented behaviour of clk_set_rate().
Indeed, on the first clk_set_rate_range will make sure the current clock rate is within the new range, so it will be between 1000 and 2000Hz. On the second clk_set_rate_range(), it will consider (rightfully), that our current clock is outside of the 3000-4000Hz range, and will call clk_core_set_rate_nolock() to set it to 3000Hz.
clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will eventually check that our rate 3000Hz rate is outside the min 3000Hz max 2000Hz range, will bail out, the error will propagate and we'll eventually return -EINVAL.
This solely relies on the fact that clk_calc_new_rates(), and in particular clk_core_determine_round_nolock(), won't modify the new rate allowing the error to be reported. That assumption won't be true for all drivers, and most importantly we'll break that assumption in a later patch.
It can also be argued that we shouldn't even reach the point where we're calling clk_core_set_rate_nolock().
Let's make an explicit check for disjoints range before we're doing anything.
--- drivers/clk/clk.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
drivers/clk/clk.c +24 -0
@@ -631,6 +631,24 @@ static void clk_core_get_boundaries(struct clk_core *core, *max_rate =min (*max_rate, clk_user->max_rate); } +static bool clk_core_check_boundaries (struct clk_core *core, +unsigned long min_rate, +unsigned long max_rate) +{ +struct clk *user; + +lockdep_assert_held (&prepare_lock); + +if (min_rate > core->max_rate || max_rate < core->min_rate) +return false; + +hlist_for_each_entry (user, &core->clks, clks_node) +if (min_rate > user->max_rate || max_rate < user->min_rate) +return false; + +return true; +} +void clk_hw_set_rate_range (struct clk_hw *hw,unsigned long min_rate,unsigned long max_rate) {
@@ -2347,6 +2365,11 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) clk->min_rate = min; clk->max_rate = max; +if (!clk_core_check_boundaries (clk->core, min, max)) { + ret = -EINVAL ; + goto out; + } + rate =clk_core_get_rate_nolock (clk->core);if (rate < min || rate > max) {/*
@@ -2375,6 +2398,7 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max) } } +out:if (clk->exclusive_count)clk_core_rate_protect (clk->core);
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 133/285 SUNRPC/xprt: async tasks mustnt block waiting for memory
In reply to Greg Kroah-HartmanFrom: NeilBrown <[email protected]>
[ Upstream commit a721035477fb5fb8abc738fbe410b07c12af3dc5 ]
When memory is short, new worker threads cannot be created and we depend on the minimum one rpciod thread to be able to handle everything. So it must not block waiting for memory.
xprt_dynamic_alloc_slot can block indefinitely. This can tie up all workqueue threads and NFS can deadlock. So when called from a workqueue, set __GFP_NORETRY.
The rdma alloc_slot already does not block. However it sets the error to -EAGAIN suggesting this will trigger a sleep. It does not. As we can see in call_reserveresult(), only -ENOMEM causes a sleep. -EAGAIN causes immediate retry.
--- net/sunrpc/xprt.c | 5 ++++- net/sunrpc/xprtrdma/transport.c | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-)
net/sunrpc/xprt.c +4 -1
@@ -1690,12 +1690,15 @@ static bool xprt_throttle_congested(struct rpc_xprt *xprt, struct rpc_task *taskstatic struct rpc_rqst *xprt_dynamic_alloc_slot (struct rpc_xprt *xprt) {struct rpc_rqst *req =ERR_PTR (-EAGAIN ); +gfp_t gfp_mask =GFP_KERNEL ;if (xprt->num_reqs >= xprt->max_reqs) goto out; ++xprt->num_reqs;spin_unlock (&xprt->reserve_lock); - req =kzalloc (sizeof (struct rpc_rqst ),GFP_NOFS ); +if (current->flags &PF_WQ_WORKER ) + gfp_mask |= __GFP_NORETRY | __GFP_NOWARN; + req =kzalloc (sizeof (*req), gfp_mask);spin_lock (&xprt->reserve_lock);if (req !=NULL ) goto out;
net/sunrpc/xprtrdma/transport.c +1 -1
@@ -525,7 +525,7 @@ xprt_rdma_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)return ; out_sleep: - task->tk_status = -EAGAIN ; + task->tk_status = -ENOMEM ;xprt_add_backlog (xprt, task); }
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 134/285 SUNRPC: remove scheduling boost for "SWAPPER" tasks.
In reply to Greg Kroah-HartmanFrom: NeilBrown <[email protected]>
[ Upstream commit a80a8461868905823609be97f91776a26befe839 ]
Currently, tasks marked as "swapper" tasks get put to the front of non-priority rpc_queues, and are sorted earlier than non-swapper tasks on the transport's ->xmit_queue.
This is pointless as currently *all* tasks for a mount that has swap enabled on *any* file are marked as "swapper" tasks. So the net result is that the non-priority rpc_queues are reverse-ordered (LIFO).
This scheduling boost is not necessary to avoid deadlocks, and hurts fairness, so remove it. If there were a need to expedite some requests, the tk_priority mechanism is a more appropriate tool.
--- net/sunrpc/sched.c | 7 ------- net/sunrpc/xprt.c | 11 ----------- 2 files changed, 18 deletions(-)
net/sunrpc/sched.c +0 -7
@@ -186,11 +186,6 @@ static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,/* * Add new request to wait queue. -* -* Swapper tasks always get inserted at the head of the queue. -* This should avoid many nasty memory deadlocks and hopefully -* improve overall performance. -* Everyone else gets appended to the queue to ensure proper FIFO behavior. */ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue, struct rpc_task *task,
@@ -199,8 +194,6 @@ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue,INIT_LIST_HEAD (&task->u.tk_wait.timer_list);if (RPC_IS_PRIORITY (queue))__rpc_add_wait_queue_priority (queue, task, queue_priority); -else if (RPC_IS_SWAPPER (task)) -list_add (&task->u.tk_wait.list, &queue->tasks[0 ]);else list_add_tail (&task->u.tk_wait.list, &queue->tasks[0 ]); task->tk_waitqueue = queue;
net/sunrpc/xprt.c +0 -11
@@ -1354,17 +1354,6 @@ xprt_request_enqueue_transmit(struct rpc_task *task)INIT_LIST_HEAD (&req->rq_xmit2); goto out; } - }else if (RPC_IS_SWAPPER (task)) { -list_for_each_entry (pos, &xprt->xmit_queue, rq_xmit) { -if (pos->rq_cong || pos->rq_bytes_sent) -continue ; -if (RPC_IS_SWAPPER (pos->rq_task)) -continue ; -/* Note: req is added _before_ pos */ -list_add_tail (&req->rq_xmit, &pos->rq_xmit); -INIT_LIST_HEAD (&req->rq_xmit2); - goto out; - } }else if (!req->rq_seqno) {list_for_each_entry (pos, &xprt->xmit_queue, rq_xmit) {if (pos->rq_task->tk_owner != task->tk_owner)
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 135/285 NFS: swap IO handling is slightly different for O_DIRECT IO
In reply to Greg Kroah-HartmanFrom: NeilBrown <[email protected]>
[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ]
1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding
possible deadlocks with "fs_reclaim". These deadlocks could, I believe, eventuate if a buffered read on the swapfile was attempted.
We don't need coherence with the page cache for a swap file, and buffered writes are forbidden anyway. There is no other need for i_rwsem during direct IO. So never take it for swap_rw()
2/ generic_write_checks() explicitly forbids writes to swap, and
performs checks that are not needed for swap. So bypass it for swap_rw().
--- fs/nfs/direct.c | 42 ++++++++++++++++++++++++++++-------------- fs/nfs/file.c | 4 ++-- include/linux/nfs_fs.h | 8 ++++---- 3 files changed, 34 insertions(+), 20 deletions(-)
fs/nfs/direct.c +28 -14
@@ -172,8 +172,8 @@ ssize_t nfs_direct_IO(struct kiocb *iocb, struct iov_iter *iter)VM_BUG_ON (iov_iter_count (iter) !=PAGE_SIZE );if (iov_iter_rw (iter) ==READ ) -return nfs_file_direct_read (iocb, iter); -return nfs_file_direct_write (iocb, iter); +return nfs_file_direct_read (iocb, iter, true); +return nfs_file_direct_write (iocb, iter, true); }static void nfs_direct_release_pages (struct page **pages,unsigned int npages)
@@ -424,6 +424,7 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq,* nfs_file_direct_read - file direct read operation for NFS files * @iocb: target I/O control block * @iter: vector of user buffers into which to read data +* @swap: flag indicating this is swap IO, not O_DIRECT IO * * We use this function for direct reads instead of calling * generic_file_aio_read() in order to avoid gfar's check to see if
@@ -439,7 +440,8 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq,* client must read the updated atime from the server back into its * cache. */ -ssize_t nfs_file_direct_read (struct kiocb *iocb,struct iov_iter *iter) +ssize_t nfs_file_direct_read (struct kiocb *iocb,struct iov_iter *iter, +bool swap) {struct file *file = iocb->ki_filp;struct address_space *mapping = file->f_mapping;
@@ -481,12 +483,14 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, struct iov_iter *iter)if (iter_is_iovec (iter)) dreq->flags =NFS_ODIRECT_SHOULD_DIRTY ; -nfs_start_io_direct (inode); +if (!swap) +nfs_start_io_direct (inode);NFS_I (inode)->read_io += count; requested =nfs_direct_read_schedule_iovec (dreq, iter, iocb->ki_pos); -nfs_end_io_direct (inode); +if (!swap) +nfs_end_io_direct (inode);if (requested >0 ) { result =nfs_direct_wait (dreq);
@@ -875,6 +879,7 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq,* nfs_file_direct_write - file direct write operation for NFS files * @iocb: target I/O control block * @iter: vector of user buffers from which to write data +* @swap: flag indicating this is swap IO, not O_DIRECT IO * * We use this function for direct writes instead of calling * generic_file_aio_write() in order to avoid taking the inode
@@ -891,7 +896,8 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq,* Note that O_APPEND is not supported for NFS direct writes, as there * is no atomic O_APPEND write facility in the NFS protocol. */ -ssize_t nfs_file_direct_write (struct kiocb *iocb,struct iov_iter *iter) +ssize_t nfs_file_direct_write (struct kiocb *iocb,struct iov_iter *iter, +bool swap) {ssize_t result, requested;size_t count;
@@ -905,7 +911,11 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter)dfprintk (FILE ,"NFS: direct write(%pD2, %zd@%Ld)\n" , file,iov_iter_count (iter), (long long ) iocb->ki_pos); - result =generic_write_checks (iocb, iter); +if (swap) +/* bypass generic checks */ + result =iov_iter_count (iter); +else + result =generic_write_checks (iocb, iter);if (result <=0 )return result; count = result;
@@ -936,16 +946,20 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter) dreq->iocb = iocb;pnfs_init_ds_commit_info_ops (&dreq->ds_cinfo, inode); -nfs_start_io_direct (inode); +if (swap) { + requested =nfs_direct_write_schedule_iovec (dreq, iter, pos); + }else { +nfs_start_io_direct (inode); - requested =nfs_direct_write_schedule_iovec (dreq, iter, pos); + requested =nfs_direct_write_schedule_iovec (dreq, iter, pos); -if (mapping->nrpages) { -invalidate_inode_pages2_range (mapping, - pos >>PAGE_SHIFT , end); - } +if (mapping->nrpages) { +invalidate_inode_pages2_range (mapping, + pos >>PAGE_SHIFT , end); + } -nfs_end_io_direct (inode); +nfs_end_io_direct (inode); + }if (requested >0 ) { result =nfs_direct_wait (dreq);
fs/nfs/file.c +2 -2
@@ -161,7 +161,7 @@ nfs_file_read(struct kiocb *iocb, struct iov_iter *to)ssize_t result;if (iocb->ki_flags &IOCB_DIRECT ) -return nfs_file_direct_read (iocb, to); +return nfs_file_direct_read (iocb, to, false); dprintk("NFS: read(%pD2, %zu@%lu)\n", iocb->ki_filp,
@@ -616,7 +616,7 @@ ssize_t nfs_file_write(struct kiocb *iocb, struct iov_iter *from)return result;if (iocb->ki_flags &IOCB_DIRECT ) -return nfs_file_direct_write (iocb, from); +return nfs_file_direct_write (iocb, from, false);dprintk ("NFS: write(%pD2, %zu@%Ld)\n" , file,iov_iter_count (from), (long long ) iocb->ki_pos);
include/linux/nfs_fs.h +4 -4
@@ -512,10 +512,10 @@ static inline const struct cred *nfs_file_cred(struct file *file)* linux/fs/nfs/direct.c */ extern ssize_t nfs_direct_IO (struct kiocb *,struct iov_iter *); -extern ssize_t nfs_file_direct_read (struct kiocb *iocb, -struct iov_iter *iter); -extern ssize_t nfs_file_direct_write (struct kiocb *iocb, -struct iov_iter *iter); +ssize_t nfs_file_direct_read (struct kiocb *iocb, +struct iov_iter *iter,bool swap); +ssize_t nfs_file_direct_write (struct kiocb *iocb, +struct iov_iter *iter,bool swap);/* * linux/fs/nfs/dir.c
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 136/285 NFS: swap-out must always use STABLE writes.
In reply to Greg Kroah-HartmanFrom: NeilBrown <[email protected]>
[ Upstream commit c265de257f558a05c1859ee9e3fed04883b9ec0e ]
The commit handling code is not safe against memory-pressure deadlocks when writing to swap. In particular, nfs_commitdata_alloc() blocks indefinitely waiting for memory, and this can consume all available workqueue threads.
swap-out most likely uses STABLE writes anyway as COND_STABLE indicates that a stable write should be used if the write fits in a single request, and it normally does. However if we ever swap with a small wsize, or gather unusually large numbers of pages for a single write, this might change.
For safety, make it explicit in the code that direct writes used for swap must always use FLUSH_STABLE.
--- fs/nfs/direct.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
fs/nfs/direct.c +6 -4
@@ -793,7 +793,7 @@ static const struct nfs_pgio_completion_ops nfs_direct_write_completion_ops = {*/ static ssize_t nfs_direct_write_schedule_iovec (struct nfs_direct_req *dreq,struct iov_iter *iter, -loff_t pos) +loff_t pos,int ioflags) {struct nfs_pageio_descriptor desc;struct inode *inode = dreq->inode;
@@ -801,7 +801,7 @@ static ssize_t nfs_direct_write_schedule_iovec(struct nfs_direct_req *dreq,size_t requested_bytes =0 ;size_t wsize =max_t (size_t,NFS_SERVER (inode)->wsize,PAGE_SIZE ); -nfs_pageio_init_write (&desc, inode,FLUSH_COND_STABLE , false, +nfs_pageio_init_write (&desc, inode, ioflags, false, &nfs_direct_write_completion_ops); desc.pg_dreq = dreq;get_dreq (dreq);
@@ -947,11 +947,13 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, struct iov_iter *iter,pnfs_init_ds_commit_info_ops (&dreq->ds_cinfo, inode);if (swap) { - requested =nfs_direct_write_schedule_iovec (dreq, iter, pos); + requested =nfs_direct_write_schedule_iovec (dreq, iter, pos, +FLUSH_STABLE ); }else {nfs_start_io_direct (inode); - requested =nfs_direct_write_schedule_iovec (dreq, iter, pos); + requested =nfs_direct_write_schedule_iovec (dreq, iter, pos, +FLUSH_COND_STABLE );if (mapping->nrpages) { invalidate_inode_pages2_range(mapping,
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 137/285 x86: Annotate call_on_stack()
In reply to Greg Kroah-HartmanFrom: Peter Zijlstra <[email protected]>
[ Upstream commit be0075951fde739f14ee2b659e2fd6e2499c46c0 ]
vmlinux.o: warning: objtool: page_fault_oops()+0x13c: unreachable instruction
0000 000000000005b460 <page_fault_oops>:
...
0128 5b588: 49 89 23 mov %rsp,(%r11) 012b 5b58b: 4c 89 dc mov %r11,%rsp 012e 5b58e: 4c 89 f2 mov %r14,%rdx 0131 5b591: 48 89 ee mov %rbp,%rsi 0134 5b594: 4c 89 e7 mov %r12,%rdi 0137 5b597: e8 00 00 00 00 call 5b59c <page_fault_oops+0x13c> 5b598: R_X86_64_PLT32 handle_stack_overflow-0x4 013c 5b59c: 5c pop %rsp
vmlinux.o: warning: objtool: sysvec_reboot()+0x6d: unreachable instruction
0000 00000000000033f0 <sysvec_reboot>:
...
005d 344d: 4c 89 dc mov %r11,%rsp 0060 3450: e8 00 00 00 00 call 3455 <sysvec_reboot+0x65> 3451: R_X86_64_PLT32 irq_enter_rcu-0x4 0065 3455: 48 89 ef mov %rbp,%rdi 0068 3458: e8 00 00 00 00 call 345d <sysvec_reboot+0x6d> 3459: R_X86_64_PC32 .text+0x47d0c 006d 345d: e8 00 00 00 00 call 3462 <sysvec_reboot+0x72> 345e: R_X86_64_PLT32 irq_exit_rcu-0x4 0072 3462: 5c pop %rsp
Both cases are due to a call_on_stack() calling a __noreturn function. Since that's an inline asm, GCC can't do anything about the instructions after the CALL. Therefore put in an explicit ASM_REACHABLE annotation to make sure objtool and gcc are consistently confused about control flow.
--- arch/x86/include/asm/irq_stack.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/include/asm/irq_stack.h +2 -1
@@ -99,7 +99,8 @@ }#define ASM_CALL_ARG0 \ - "call %P[__func] \n" + "call %P[__func] \n" \ + ASM_REACHABLE#define ASM_CALL_ARG1 \ "movq %[arg1], %%rdi \n" \
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 138/285 x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
In reply to Greg Kroah-HartmanFrom: Nathan Chancellor <[email protected]>
[ Upstream commit aaeed6ecc1253ce1463fa1aca0b70a4ccbc9fa75 ]
There are two outstanding issues with CONFIG_X86_X32_ABI and llvm-objcopy, with similar root causes:
1. llvm-objcopy does not properly convert .note.gnu.property when going from x86_64 to x86_x32, resulting in a corrupted section when linking:
https://github.com/ClangBuiltLinux/linux/issues/1141
2. llvm-objcopy produces corrupted compressed debug sections when going from x86_64 to x86_x32, also resulting in an error when linking:
https://github.com/ClangBuiltLinux/linux/issues/514
After commit 41c5ef31ad71 ("x86/ibt: Base IBT bits"), the .note.gnu.property section is always generated when CONFIG_X86_KERNEL_IBT is enabled, which causes the first issue to become visible with an allmodconfig build:
ld.lld: error: arch/x86/entry/vdso/vclock_gettime-x32.o:(.note.gnu.property+0x1c): program property is too short
To avoid this error, do not allow CONFIG_X86_X32_ABI to be selected when using llvm-objcopy. If the two issues ever get fixed in llvm-objcopy, this can be turned into a feature check.
--- arch/x86/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
arch/x86/Kconfig +5 -0
@@ -2827,6 +2827,11 @@ config IA32_AOUT config X86_X32 bool "x32 ABI for 64-bit mode" depends on X86_64 + # llvm-objcopy does not convert x86_64 .note.gnu.property or + # compressed debug sections to x86_x32 properly: + # https://github.com/ClangBuiltLinux/linux/issues/514 + # https://github.com/ClangBuiltLinux/linux/issues/1141 + depends on $(success,$(OBJCOPY) --version | head -n1 | grep -qv llvm) help Include code to run binaries for the x32 native 32-bit ABI for 64-bit processors. An x32 process gets access to the
Signature · 1 line
2.35.1
Greg Kroah-Hartman
maintainerPATCH 139/285 serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
In reply to Greg Kroah-HartmanFrom: Jiri Slaby <[email protected]>
[ Upstream commit 988c7c00691008ea1daaa1235680a0da49dab4e8 ]
The commit c15c3747ee32 (serial: samsung: fix potential soft lockup during uart write) added an unlock of port->lock before uart_write_wakeup() and a lock after it. It was always problematic to write data from tty_ldisc_ops::write_wakeup and it was even documented that way. We fixed the line disciplines to conform to this recently. So if there is still a missed one, we should fix them instead of this workaround.
On the top of that, s3c24xx_serial_tx_dma_complete() in this driver still holds the port->lock while calling uart_write_wakeup().
So revert the wrap added by the commit above.
--- drivers/tty/serial/samsung_tty.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/tty/serial/samsung_tty.c +1 -4
@@ -922,11 +922,8 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)return ; } -if (uart_circ_chars_pending (xmit) <WAKEUP_CHARS ) { -spin_unlock (&port->lock); +if (uart_circ_chars_pending (xmit) <WAKEUP_CHARS )uart_write_wakeup (port); -spin_lock (&port->lock); - }if (uart_circ_empty (xmit))s3c24xx_serial_stop_tx (port);
Signature · 1 line
2.35.1