dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
Subsystems (2)
PATCH v3 1/2 dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
Add YAML device tree binding for IMX519 CMOS image sensor, and the relevant MAINTAINERS entries.
Signed-off-by Lee <[email protected]>
--- .../bindings/media/i2c/sony,imx519.yaml | 107 ++++++++++++++++++ MAINTAINERS | 8 ++ 2 files changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml new file +107 -0
@@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx519.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony 1/2.5-Inch 16Mpixel CMOS Digital Image Sensor + +maintainers: + - Lee <[email protected]> + +description: |- + The Sony IMX519 is a 1/2.5-inch CMOS active pixel digital image sensor + with an active array size of 4656H x 3496V. It is programmable through + I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet. + Image data is sent through MIPI CSI-2, which is configured as either 2 or + 4 data lanes. + +properties: + compatible: + const: sony,imx519 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + vdig-supply: + description: + Digital I/O voltage supply, 1.05 volts + + vana-supply: + description: + Analog voltage supply, 2.8 volts + + vddl-supply: + description: + Digital core voltage supply, 1.8 volts + + reset-gpios: + description: |- + Reference to the GPIO connected to the xclr pin, if any. + Must be released (set high) after all supplies and INCK are applied. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - vana-supply + - vdig-supply + - vddl-supply + - port + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imx519: sensor@1a { + compatible = "sony,imx519"; + reg = <0x1a>; + clocks = <&imx519_clk>; + vana-supply = <&imx519_vana>; /* 2.8v */ + vdig-supply = <&imx519_vdig>; /* 1.05v */ + vddl-supply = <&imx519_vddl>; /* 1.8v */ + + port { + imx519_0: endpoint { + remote-endpoint = <&csi1_ep>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <493500000>; + }; + }; + }; + }; + +...
MAINTAINERS +8 -0
@@ -19232,6 +19232,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml F: drivers/media/i2c/imx412.c +SONY IMX519 SENSOR DRIVER +M: Arducam Kernel Maintenance <[email protected]> +M: Lee <[email protected]> +L: [email protected] +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml + SONY MEMORYSTICK SUBSYSTEM M: Maxim Levitsky <[email protected]> M: Alex Dubov <[email protected]>
Signature · 1 line
2.34.1
Quoted 4 lines · lee
Add YAML device tree binding for IMX519 CMOS image sensor, and the relevant
MAINTAINERSentries.Signed-off-by Lee <[email protected]>
That's surprising change... You must use your full legal name, as in latin alphabet. Previously this was something else, so I have doubts. No single names (like first name) or nicknames.
Quoted 6 lines
--- .../bindings/media/i2c/sony,imx519.yaml | 107 ++++++++++++++++++ MAINTAINERS | 8 ++ 2 files changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx519.yaml
Best regards,
Krzysztof