cmd: sf/nand: Print and return failure when 0 length is passed
PATCH v3 1/1 cmd: sf/nand: Print and return failure when 0 length is passed
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to do.
So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is passed to sf commands. Same thing applies for nand commands also.
Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>
---
Changes in v3:
- Change printf to debug as it is too verbose
Changes in v2:
- Changed print from 'size is 0' to Invalid size 0 without quites.
- Modified description to be imperative
- Fixed typo in description from "samething" to "same thing"
cmd/legacy-mtd-utils.c | 5 +++++ cmd/sf.c | 5 +++++ 2 files changed, 10 insertions(+)
cmd/legacy-mtd-utils.c +5 -0
@@ -88,6 +88,11 @@ int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off,return -1 ; } +if (*size ==0 ) { +debug ("ERROR: Invalid size 0\n" ); +return -1 ; + } + print:printf ("device %d " , *idx);if (*size == chipsize)
cmd/sf.c +5 -0
@@ -353,6 +353,11 @@ static int do_spi_flash_erase(int argc, char *const argv[])if (ret !=1 )return CMD_RET_USAGE ; +if (size ==0 ) { +debug ("ERROR: Invalid size 0\n" ); +return CMD_RET_FAILURE ; + } +/* Consistency checking */ if (offset + size > flash->size) { printf("ERROR: attempting %s past flash size (%#x)\n",
Signature · 1 line
2.17.1
Michal Simek
AppliedQuoted 19 lines · Ashok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to do.
So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is passed to sf commands. Same thing applies for nand commands also.
Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>
Quoted 3 lines
Signed-off-by Ashok Reddy Soma <[email protected]>---
Applied it to my queue. If someone else wants to take please let me know and I will drop it from my queue.
Thanks,
Michal
Quoted 22 lines · Michal Simek
Quoted 19 lines · Ashok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to do.
So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is passed to sf commands. Same thing applies for nand commands also.
Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>
Quoted 5 lines
Quoted 3 lines
Signed-off-by Ashok Reddy Soma <[email protected]>---
Applied it to my queue. If someone else wants to take please let me know and I will drop it from my queue.
I believe Jagan should be picking SF patches ?
Quoted 26 lines · Marek Vasut
Quoted 24 lines · Michal Simek
Quoted 21 lines · Ashok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to
do.So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is
passed to sf commands. Same thing applies for nand commands also.Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Signed-off-by Ashok Reddy Soma <[email protected]>---
Applied it to my queue. If someone else wants to take please let me know and I will drop it from my queue.
I believe Jagan should be picking SF patches ?
Sorry, I missed this during a couple of travels last week.
Jagan.
Quoted 31 lines · Jagan Teki
Quoted 30 lines · Marek Vasut
Quoted 28 lines · Michal Simek
Quoted 24 lines · Ashok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to
do.So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is
passed to sf commands. Same thing applies for nand commands also.Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>Signed-off-by Ashok Reddy Soma <[email protected]>---
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Applied it to my queue. If someone else wants to take please let me know and I will drop it from my queue.
I believe Jagan should be picking SF patches ?
Sorry, I missed this during a couple of travels last week.
Time to prepare a late MR against u-boot/next then ? I think there are also a few other patches pending .
Quoted 36 lines · Marek Vasut
Quoted 34 lines · Jagan Teki
Quoted 33 lines · Marek Vasut
Quoted 30 lines · Michal Simek
Quoted 21 lines · Ashok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to
do.So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is
passed to sf commands. Same thing applies for nand commands also.Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>Quoted 3 lines
Signed-off-by Ashok Reddy Soma <[email protected]>---
Applied it to my queue. If someone else wants to take please let me know and I will drop it from my queue.
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
I believe Jagan should be picking SF patches ?
Sorry, I missed this during a couple of travels last week.
Time to prepare a late MR against u-boot/next then ? I think there are also a few other patches pending .
Yes, Will wind up all. thanks.
Jagan.
Quoted 19 lines · Ashok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to do.
So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is passed to sf commands. Same thing applies for nand commands also.
Example:
ZynqMP> sf erase 0 0
ERROR: Invalid size 0
ZynqMP> sf write 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf read 10000 0 0
ERROR: Invalid size 0
ZynqMP> sf update 1000 10000 0
ERROR: Invalid size 0
ZynqMP>
Quoted 1 line
Signed-off-by Ashok Reddy Soma <[email protected]>
Applied to u-boot/next, thanks!
Signature · 1 line
Tom