Add FriendlyElec NanoPi M5 support for Rockchip RK3576
Subsystems (2)
v4 cover Add FriendlyElec NanoPi M5 support for Rockchip RK3576
This series adds device tree support for the FriendlyElec NanoPi M5 board, powered by the Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). The patches enable basic booting and connectivity, including dual 1Gbps Ethernet, USB 3.2, microSD, M.2 PCIe NVMe, and HDMI.
Changes in v4:
- Addressed Diederik's feedback:
- Renamed pinctrl nodes to align with schematic labels
- Moved pinctrl-0 and pinctrl-names into button-user sub-node
Changes in v3:
- Improved (even more) fspi1m1_pins comment for clarity, specifying gpio1_d5, gpio1_c4-c7 (clk, d0-d4) for SPI NOR flash.
- Removed redundant #address-cells and #size-cells from sfc1 node, as they are inherited from rk3576.dtsi.
Changes in v2:
- Fixed DT schema warnings (Rob Herring):
- Renamed spi-nor@0 to flash@0
- Renamed pmic@23 pinctrl nodes to end with -pins
- Renamed hym8563@51 to rtc@51 and removed clock-frequency
- Renamed button@1 to button-user
- Addressed Heiko Stuebner's feedback:
- Sorted non-addressed nodes alphabetically
- Added blank lines in regulator nodes
- Improved fspi1m1_pins comment to clarify SPI NOR flash pinmux
- Moved status property in saradc to last
Patch 1: Updates DT bindings in rockchip.yaml Patch 2: Adds NanoPi M5 device tree and Makefile entry
No MAINTAINERS update needed, as the new file is covered by the existing ARM/Rockchip SoC entry.
Tested on NanoPi M5 with successful boot and feature validation.
---
John Clark (2):
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
.../devicetree/bindings/arm/rockchip.yaml | 6 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 999 ++++++++++++++++++ 3 files changed, 1006 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
Signature · 1 line
2.39.5
PATCH v4 1/2 dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
Add device tree documentation for rk3576-nanopi-m5
--- Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +6 -0
@@ -300,6 +300,12 @@ properties: - friendlyarm,nanopi-r4s-enterprise - const: rockchip,rk3399 + - description: FriendlyElec NanoPi M5 series boards + items: + - enum: + - friendlyarm,nanopi-m5 + - const: rockchip,rk3576 + - description: FriendlyElec NanoPi R5 series boards items: - enum:
Signature · 1 line
2.39.5
PATCH v4 2/2 arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
In reply to John ClarkAdd device tree for FriendlyElec NanoPi M5 with Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables basic booting and connectivity.
Supported features:
- RK3576 SoC
- 4GB/8GB/16GB LPDDR4X/LPDDR5 RAM
- 16MB SPI Nor Flash
- 2x 1Gbps Ethernet
- 2x USB 3.2 Gen 1 Type-A ports
- microSD UHS-I
- M.2 M-Key PCIe 2.1 x1 NVMe support
- HDMI 1.4/2.0 (up to 4096x2304@60Hz)
- 30-pin GPIO (2x SPI, 4x UART, 3x I2C, 5x PWM, 20x GPIO)
- Debug UART
- RTC with HYM8563TS
- Power via USB-C (PD, 6V~20V)
--- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 999 ++++++++++++++++++ 2 files changed, 1000 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -148,6 +148,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +999 -0
999 lines not on this page · raw message
Signature · 1 line
2.39.5
Re: [PATCH v4 2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
Hi John,
Quoted 57 lines · John Clark
Add device tree for FriendlyElec NanoPi M5 with Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables basic booting and connectivity.
Supported features:
- RK3576 SoC
- 4GB/8GB/16GB LPDDR4X/LPDDR5 RAM
- 16MB SPI Nor Flash
- 2x 1Gbps Ethernet
- 2x USB 3.2 Gen 1 Type-A ports
- microSD UHS-I
- M.2 M-Key PCIe 2.1 x1 NVMe support
- HDMI 1.4/2.0 (up to 4096x2304@60Hz)
- 30-pin GPIO (2x SPI, 4x UART, 3x I2C, 5x PWM, 20x GPIO)
- Debug UART
- RTC with HYM8563TS
- Power via USB-C (PD, 6V~20V)Signed-off-by John Clark <[email protected]>--- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 999 ++++++++++++++++++ 2 files changed, 1000 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dtsarch/arm64/boot/dts/rockchip/Makefile +1
-0@@ -148,6 +148,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtbarch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +14
-0@@ -0,0 +1,999 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd. + * Copyright (c) 2025 John Clark <[email protected]> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/soc/rockchip,vop2.h>
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 24
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+#include <dt-bindings/usb/pd.h> +#include "rk3576.dtsi" + +/ { + model = "FriendlyElec NanoPi M5"; + compatible = "friendlyarm,nanopi-m5", "rockchip,rk3576"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1;
Do we need to add mmc0 alias here?
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 33
Quoted 9 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +9
-0+ }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc_5v0_hdmi>;
Schematic names this vcc5v_hdmi_tx for the HDMI +5V Power pin.
Quoted 9 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +9
-0+ type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 52
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ keys { + compatible = "gpio-keys"; + + button-user { + debounce-interval = <50>; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_LOW>; + label = "User"; + linux,code = <BTN_1>; + pinctrl-names = "default"; + pinctrl-0 = <&button_user_pin>;
usr_button is used in schematics, maybe usr_button_pin?
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 62
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_led: led-0 { + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; + label = "sys_led";
Please use color and function props, you can skip label or use SYS as printed on the board.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 65
Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +3
-0+ linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>;
Schematic use led_sys_h for this pin.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 70
Quoted 5 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +5
-0+ }; + + lan_led: led-1 { + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>; + label = "lan_led";
Same as above, use color and function props, this is named LED2.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 72
Quoted 2 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +2
-0+ pinctrl-names = "default"; + pinctrl-0 = <&lan_led_pin>;
Schematic use led2_h for this pin.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 77
Quoted 5 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +5
-0+ }; + + wan_led: led-2 { + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + label = "wan_led";
Same as above, use color and function props, this is named LED1.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 79
Quoted 2 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +2
-0+ pinctrl-names = "default"; + pinctrl-0 = <&wan_led_pin>;
Schematic use led1_h for this pin.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 89
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ }; + }; + + vcc_12v_dcin: regulator-vcc-12v-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-name = "vcc_12v_dcin";
This is named 6~20v_dcin or vcc12v_dcin in schematics.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 93
Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +4
-0+ + regulator-state-mem { + regulator-on-in-suspend; + };
Is all these regulator-state-mem nodes needed for regulator-fixed?
Quoted 26 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +26
-0+ }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem {
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 129
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ regulator-off-in-suspend; + }; + }; + + vcc_3v3_m2_keym: regulator-vcc-3v3-m2_keym { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_m2_pwren>;
This is called pcie0_pwren_h in schematic.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 132
Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +3
-0+ regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_m2_keym";
This is named vcc3v3_m2_keym in schematic.
Quoted 17 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +17
-0+ vin-supply = <&vcc_5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem {
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 159
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ regulator-on-in-suspend; + }; + }; + + vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_s0_pwren>;
This is called sdmmc0_pwren_h in schematic.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 162
Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +3
-0+ regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>;
Should be 3.3v not 3.0v?
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 163
Quoted 1 line
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +1
-0+ regulator-name = "vcc_3v3_sd_s0";
This is called vcc3v3_sd_s0 in schematic.
Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +4
-0+ vin-supply = <&vcc_3v3_s3>; + + regulator-state-mem { + regulator-on-in-suspend;
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 177
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ }; + }; + + vcc_5v0_device: regulator-vcc-5v0-device { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_device";
I cannot find this regulator in the schematic, only vcc5v0_sys_s5.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 188
Quoted 11 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +11
-0+ vin-supply = <&vcc_12v_dcin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_5v0_hdmi: regulator-vcc-5v0-hdmi { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
This is used to switch between HDMI2.0(TMDS) and HDMI2.1(FRL) mode, and should probably not be modeled as a regulator.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 193
Quoted 5 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +5
-0+ pinctrl-names = "default"; + pinctrl-0 = <&hdmi_con_en>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_hdmi";
Schematics use vcc5v_hdmi_tx for the HDMI +5V pin.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 194
Quoted 1 line
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +1
-0+ vin-supply = <&vcc_5v0_sys>;
This should be vcc5v0_sys_s5.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 206
Quoted 12 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +12
-0+ + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_host: regulator-vcc-5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>;
This is called usb3_host_pwren_h in schematic.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 209
Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +3
-0+ regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_host";
This is called usb3_port2_5v in schematic.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 210
Quoted 1 line
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +1
-0+ vin-supply = <&vcc_5v0_device>;
This should be vcc5v0_sys_s5.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 222
Quoted 12 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +12
-0+ + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0_otg: regulator-vcc-5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren>;
This is called usb_otg0_pwren_h in schematic.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 225
Quoted 3 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +3
-0+ regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_otg";
This is called vcc5v0_usb_otg0 in the schematic.
Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +4
-0+ vin-supply = <&vcc_5v0_device>; + + regulator-state-mem { + regulator-off-in-suspend;
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 239
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ }; + }; + + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc_5v0_sys";
This is called vcc5v0_sys_s5 in the schematic.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 250
Quoted 11 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +11
-0+ vin-supply = <&vcc_12v_dcin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det>;
This is called hp_det_l in schematic.
Quoted 534 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +534
-0+ + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "realtek,rt5616-codec"; + + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "IN1P", "Microphone Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack"; + + simple-audio-card,codec { + sound-dai = <&rt5616>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&fspi1m1_pins { + /* gpio1_d5, gpio1_c4-c7 (clk, d0-d4) are for spi nor flash */ + /* gpio1_d0-d4 muxed to sai2 audio functions */ + rockchip,pins = + <1 RK_PD5 3 &pcfg_pull_none>, + <1 RK_PC4 3 &pcfg_pull_none>, + <1 RK_PC5 3 &pcfg_pull_none>, + <1 RK_PC6 3 &pcfg_pull_none>, + <1 RK_PC7 3 &pcfg_pull_none>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim + ð0m0_tx_bus2 + ð0m0_rx_bus2 + ð0m0_rgmii_clk + ð0m0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3_s3>; + pinctrl-names = "default"; + pinctrl-0 = <ð1m0_miim + ð1m0_tx_bus2 + ð1m0_rx_bus2 + ð1m0_rgmii_clk + ð1m0_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc_5v0_sys>; + vcc2-supply = <&vcc_5v0_sys>; + vcc3-supply = <&vcc_5v0_sys>; + vcc4-supply = <&vcc_5v0_sys>; + vcc5-supply = <&vcc_5v0_sys>; + vcc6-supply = <&vcc_5v0_sys>; + vcc7-supply = <&vcc_5v0_sys>; + vcc8-supply = <&vcc_5v0_sys>; + vcc9-supply = <&vcc_5v0_sys>; + vcc10-supply = <&vcc_5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_big_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c5 { + clock-frequency = <200000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5m3_xfer>; + status = "okay"; + + rt5616: audio-codec@1b { + compatible = "realtek,rt5616"; + reg = <0x1b>; + assigned-clocks = <&cru CLK_SAI2_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru CLK_SAI2_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +};
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 794
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ +&mdio0 { + rgmii_phy0: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC0_OUT>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_int>;
This is missing pinctrl for the reset-gpios pin.
Quoted 5 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +5
-0+ reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; + }; +};
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 809
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ +&mdio1 { + rgmii_phy1: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + clocks = <&cru REFCLKO25M_GMAC1_OUT>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_int>;
This is missing pinctrl for the reset-gpios pin.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 818
Quoted 9 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +9
-0+ reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_m2_reset>;
This is called pcie0_perstn in schematic.
Quoted 74 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +74
-0+ reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2_keym>; + status = "okay"; +}; + +&pinctrl { + gmac { + gmac0_int: gmac0-int { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac0_rst: gmac0-rst { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + gmac1_int: gmac1-int { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + gmac1_rst: gmac1-rst { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_con_en: hdmi-con-en { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + keys { + button_user_pin: button-user-pin { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sys_led_pin: sys-led-pin { + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + wan_led_pin: wan-led-pin { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_m2_pwren: pcie-m2-pwren { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie_m2_reset: pcie-m2-reset { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sd_s0_pwren: sd-s0-pwren { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sound { + hp_det: hp-det { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren {
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 902
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + usb_otg0_pwren: usb-otg0-pwren { + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rng { + status = "okay";
This is default for the SoC so this can be dropped.
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+}; + +&sai2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +};
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 922
Quoted 10 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +10
-0+ +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_bus4>;
Please use the <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_det>, <&sdmmc0_bus4> format, will include more schemantic information for parsers.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 931
Quoted 9 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +9
-0+ sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_3v3_sd_s0>; + status = "okay"; +}; + +&sfc1 { + pinctrl-names = "default"; + pinctrl-0 = <&fspi1m1_csn0 &fspi1m1_pins>;
Same here.
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts line 938
Quoted 7 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +7
-0+ status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <20000000>;
For U-Boot I tested with 50 MHz, any reason why this is so low? Please check datasheet for the SPI-flash module.
Regards,
Jonas
Quoted 61 lines
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +61
-0+ spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + vcc-supply = <&vcc_1v8_s3>; + }; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc_5v0_otg>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_host>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "otg"; + extcon = <&u2phy0>; + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&wdt { + status= "okay"; +};
Re: [PATCH v4 1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
In reply to John ClarkQuoted 7 lines · John Clark
Add device tree documentation for rk3576-nanopi-m5
Signed-off-by John Clark <[email protected]>--- Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++ 1 file changed, 6 insertions(+)