ARM: dts: aspeed: Add Nvidia VR-NVL BMC
PATCH v3 1/1 ARM: dts: aspeed: Add Nvidia VR-NVL BMC
Adds a dts for the NVIDIA VR-NVL BMC board, an AST2600-based BMC for the Vera Rubin NVL platform.
MAC0 uses phy-mode = "rgmii-id" with no SoC-side clk-delay node, so it relies on the zero default introduced by commit 3f6198c0db1c ("clk:
ast2600: set default clk-delay for all ethernet macs to 0"). With that change in place, MAC0 brings up its MDIO bus and establishes a link with the on-board PHY.
---
v3:
- Drop unused spi1/spi2 aliases and nodes.
- Drop unused FMC flash@1 and flash@2.
v2:
- Sort the Makefile entry alphabetically.
- Drop unused mmc0/1/2 aliases; eMMC/SD are not used on this board.
- Drop unused ethernet1/2/3 aliases (only mac0 is enabled).
- Drop redundant aspeed,ecc-size-mb = <0> (defaults to 0).
- Drop unnecessary flash compatible; it defaults to jedec,spi-nor.
- Drop the disabled spi1 flash@1 node.
v2: Message-Id: <[email protected]>
v1: Message-Id: <[email protected]>
arch/arm/dts/Makefile | 1 + arch/arm/dts/ast2600-vr-bmc-nvidia.dts | 155 +++++++++++++++++++++++++ 2 files changed, 156 insertions(+) create mode 100644 arch/arm/dts/ast2600-vr-bmc-nvidia.dts
arch/arm/dts/Makefile +1 -0
@@ -702,6 +702,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ ast2600-slt.dtb \ ast2600-tacoma.dtb \ ast2600-tacoma.dtb \ + ast2600-vr-bmc-nvidia.dtb \ ast2600-x4tf.dtb \ ast2600a0-evb.dtb \ ast2600a1-evb.dtb
arch/arm/dts/ast2600-vr-bmc-nvidia.dts new file +155 -0
155 lines not on this page · raw message
Signature · 1 line
2.43.0
Quoted 10 lines · Jacky Huang
Adds a dts for the NVIDIA VR-NVL BMC board, an AST2600-based BMC for the Vera Rubin NVL platform.
MAC0 uses phy-mode = "rgmii-id" with no SoC-side clk-delay node, so it relies on the zero default introduced by commit
3f6198c0db1c("clk:
ast2600: set default clk-delay for all ethernet macs to 0"). With that change in place, MAC0 brings up its MDIO bus and establishes a link with the on-board PHY.[...]
Applied to openbmc/u-boot.git (v2019.04-aspeed-openbmc), thanks!
Please note: Your change will not be available in OpenBMC until the commit reference of u-boot got bumped. This will likely happen within the next hours.
[1/1] ARM: dts: aspeed: Add Nvidia VR-NVL BMC
https://github.com/openbmc/u-boot/commit/edc4a61d116f
Cheers,
Tan