K9G8G08UM u-boot 1.1.6 saveenv
Hi,every one ,i met a question with u-boot 1.1.6 and nand flash K9G8G08UM?
when i do saveenv, it can save into ram,but when i reset ,it resets the default! following is u-boot information:
U-Boot 1.1.6 (Nov 2 2008 - 10:54:43) for SMDK6400
CPU: S3C6400 at 533MHz
Fclk = 533MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode) Board: SMDK6400 DRAM: 128 MB Flash: 0 kB NAND: 1024 MB
*** Warning - bad CRC or NAND, using default environment "*** Warning - bad CRC or NAND, using default environment"
this is the main question!
i hope i can get someone help,thanks very much!
Dear hjj,
Quoted 6 lines · In message <[email protected]>…
Hi,every one ,i met a question with u-boot 1.1.6 and nand flash K9G8G08UM ??
when i do saveenv, it can save into ram,but when i reset ,it resets the default! following is u-boot information:U-Boot 1.1.6 (Nov 2 2008 - 10:54:43) for SMDK6400
Don't waste your (and our) time on ancient code. The SMDK6400 is supported in current code. Please make sure to use the latest release (v2008.10) or top of tree from git repository.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Life. Don't talk to me about life. - Marvin the Paranoid Android