add TI DA8xx support: Add new directory for da830evm board
PATCH v5 3/4 add TI DA8xx support: Add new directory for da830evm board
From: Sekhar Nori <[email protected]>
Add new directory for da830evm board
Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/
Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).
---
Applies to u-boot-ti
board/davinci/da830evm/Makefile | 51 +++++++++++++++ board/davinci/da830evm/config.mk | 43 +++++++++++++ board/davinci/da830evm/da830evm.c | 127 +++++++++++++++++++++++++++++++++++++ 3 files changed, 221 insertions(+), 0 deletions(-)
board/davinci/da830evm/Makefile new file +51 -0
@@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <[email protected]> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := da830evm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/davinci/da830evm/config.mk new file +43 -0
43 lines not on this page · raw message
board/davinci/da830evm/da830evm.c new file +127 -0
127 lines not on this page · raw message
Paulraj
PATCH v5 3/4 add TI DA8xx support: Add new directory for da830evm board
Quoted 14 lines
From: Sekhar Nori <[email protected]>
Add new directory for da830evm board
Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/
Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).
Quoted 8 lines
Signed-off-by Nick Thompson <[email protected]>---
Applies to u-boot-tiboard/davinci/da830evm/Makefile | 51 +++++++++++++++ board/davinci/da830evm/config.mk | 43 +++++++++++++ board/davinci/da830evm/da830evm.c | 127+++++++++++++++++++++++++++++++++++++
Pushed to u-boot-ti/master
http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=1e9baa494a1901b4e4015454b486c2aa14954442
Thanks,
Sandeep