Skip to contentSkip to conversation

add TI DA8xx support: Add new directory for da830evm board

PATCH Superseded Nick Thompson 2 participants 2 messages Nov 10, 2009 – Nov 12, 2009

lore
Share & tools
lore
#0 lore raw

PATCH v5 3/4 add TI DA8xx support: Add new directory for da830evm board

From: Sekhar Nori <[email protected]>

Add new directory for da830evm board

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/

Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).

---
Applies to u-boot-ti

 board/davinci/da830evm/Makefile   |   51 +++++++++++++++
 board/davinci/da830evm/config.mk  |   43 +++++++++++++
 board/davinci/da830evm/da830evm.c |  127 +++++++++++++++++++++++++++++++++++++
 3 files changed, 221 insertions(+), 0 deletions(-)
board/davinci/da830evm/Makefile new file +51 -0
new file mode 100644
index 0000000..02636fa
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <[email protected]>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= da830evm.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/davinci/da830evm/config.mk new file +43 -0

43 lines not on this page · raw message

board/davinci/da830evm/da830evm.c new file +127 -0

127 lines not on this page · raw message

#1 lore raw

PATCH v5 3/4 add TI DA8xx support: Add new directory for da830evm board

Quoted 14 lines

From: Sekhar Nori <[email protected]>

Add new directory for da830evm board

Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/

Provides:
Initial boot and configuration.
Support for i2c.
UART support (console).

Quoted 8 lines

---
Applies to u-boot-ti

 board/davinci/da830evm/Makefile   |   51 +++++++++++++++
 board/davinci/da830evm/config.mk  |   43 +++++++++++++
 board/davinci/da830evm/da830evm.c |  127

+++++++++++++++++++++++++++++++++++++

Pushed to u-boot-ti/master

http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commit;h=1e9baa494a1901b4e4015454b486c2aa14954442

Thanks,
Sandeep