iio: light: ltr390: Remove stale TODOs
Subsystems (2)
PATCH v3 1/1 iio: light: ltr390: Remove stale TODOs
Remove stale TODOs from ltr390.c. All features have already been implemented by Abhash Jha<[email protected]>'s patches:
[1] Configurable gain and resolution
[2] Suspend/resume support
[3] Support for reading the ALS
[4] Interrupt support
---
Changes since v3:
* Reformatted commit links.
drivers/iio/light/ltr390.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/iio/light/ltr390.c +0 -6
@@ -10,12 +10,6 @@* * Datasheet: * https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf -* -* TODO: -* - Support for configurable gain and resolution -* - Sensor suspend/resume support -* - Add support for reading the ALS -* - Interrupt support */ #include <linux/bitfield.h>
Signature · 1 line
2.55.0
Quoted 9 lines · Chang Yu
Remove stale TODOs from
ltr390.c. All features have already been implemented by Abhash Jha<[email protected]>'s patches:[1] Configurable gain and resolution
[2] Suspend/resume support
[3] Support for reading the ALS
[4] Interrupt support
Quoted 5 lines
Link is the official tag, no blank line is supposed to be here. But no need to resend anymore, for this patch I hope Jonathan will make a necessary tweak whilst applying.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 8 lines · On Fri, 28 Aug 2026 01:13:54 -0700 Chang Yu <[email protected]> wrote:
Remove stale TODOs from
ltr390.c. All features have already been implemented by Abhash Jha<[email protected]>'s patches:[1] Configurable gain and resolution
[2] Suspend/resume support
[3] Support for reading the ALS
[4] Interrupt support
Quoted 7 lines
Signed-off-by Chang Yu <[email protected]>---
Next time, please wait at least 24 hours before sending a new version.
Signature · 2 lines
Kind regards, Joshua Crofts
Jonathan Cameron
maintainerQuoted 16 lines · On Fri, 28 Aug 2026 11:19:46 +0300 Andy Shevchenko <[email protected]>…
Quoted 9 lines · Chang Yu
Remove stale TODOs from
ltr390.c. All features have already been implemented by Abhash Jha<[email protected]>'s patches:[1] Configurable gain and resolution
[2] Suspend/resume support
[3] Support for reading the ALS
[4] Interrupt supportQuoted 5 lines
Quoted 5 lines
Link is the official tag, no blank line is supposed to be here. But no need to resend anymore, for this patch I hope Jonathan will make a necessary tweak whilst applying.
Reviewed-by Andy Shevchenko <[email protected]>
It was a touch messy as b4 picked up the fact there were tags in the earlier version for Link and (I think) because of this blank line it didn't match them with these ones so we had two sets of the same thing. Anyhow fixed up and applied
Jonathan