virtio-net: support dynamic coalescing moderation
Subsystems (4)
v4 cover virtio-net: support dynamic coalescing moderation
Now, virtio-net already supports per-queue moderation parameter setting. Based on this, we use the linux dimlib to support dynamic coalescing moderation for virtio-net.
Due to some scheduling issues, we only support and test the rx dim.
Some test results:
I. Sockperf UDP
=================================================
1. Envrxq_0 with affinity to cpu_0.
2. Cmd
client: taskset -c 0 sockperf tp -p 8989 -i $IP -t 10 -m 16B
server: taskset -c 0 sockperf sr -p 8989
3. Result
dim off: 1143277.00 rxpps, throughput 17.844 MBps, cpu is 100%. dim on: 1124161.00 rxpps, throughput 17.610 MBps, cpu is 83.5%.
=================================================
II. Redis
=================================================
1. Env
There are 8 rxqs, and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, ops/sec of memtier_benchmark client is
dim off: 978437.23 dim on: 1143638.28
=================================================
III. Nginx
=================================================
1. Env
There are 8 rxqs and rxq_i with affinity to cpu_i.
2. Result
When all cpus are 100%, requests/sec of wrk client is
dim off: 877931.67 dim on: 1019160.31
=================================================
IV. Latency of sockperf udp
=================================================
1. Rx cmd
taskset -c 0 sockperf sr -p 8989
2. Tx cmd
taskset -c 0 sockperf pp -i ${ip} -p 8989 -t 10
After running this cmd 5 times and averaging the results,
3. Result
dim off: 17.7735 usec dim on: 18.0110 usec
=================================================
Changelog:v3->v4:
- Patch(5/5): drop.
v2->v3:
- Patch(4/5): some minor modifications.
v1->v2:
- Patch(2/5): a minor fix.
- Patch(4/5):
- improve the judgment of dim switch conditions.
- Cancel the work when vq reset.
- Patch(5/5): drop the tx dim implementation.
Heng Qi (4):
virtio-net: returns whether napi is complete
virtio-net: separate rx/tx coalescing moderation cmds
virtio-net: extract virtqueue coalescig cmd for reuse
virtio-net: support rx netdim
drivers/net/virtio_net.c | 312 ++++++++++++++++++++++++++++++++------- 1 file changed, 255 insertions(+), 57 deletions(-)
Signature · 1 line
2.19.1.6.gb485710b
PATCH v4 1/4 virtio-net: returns whether napi is complete
rx netdim needs to count the traffic during a complete napi process, and start updating and comparing samples to make decisions after the napi ends. Let virtqueue_napi_complete() return true if napi is done, otherwise vice versa.
--- drivers/net/virtio_net.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/virtio_net.c +5 -1
@@ -431,7 +431,7 @@ static void virtqueue_napi_schedule(struct napi_struct *napi, } } -static void virtqueue_napi_complete (struct napi_struct *napi, +static bool virtqueue_napi_complete (struct napi_struct *napi,struct virtqueue *vq,int processed) {int opaque;
@@ -440,9 +440,13 @@ static void virtqueue_napi_complete(struct napi_struct *napi,if (napi_complete_done (napi, processed)) {if (unlikely (virtqueue_poll (vq, opaque)))virtqueue_napi_schedule (napi, vq); +else +return true; }else {virtqueue_disable_cb (vq); } + +return false; }static void skb_xmit_done (struct virtqueue *vq)
Signature · 1 line
2.19.1.6.gb485710b
PATCH v4 2/4 virtio-net: separate rx/tx coalescing moderation cmds
In reply to Heng QiThis patch separates the rx and tx global coalescing moderation commands to support netdim switches in subsequent patches.
--- drivers/net/virtio_net.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-)
drivers/net/virtio_net.c +28 -3
@@ -3266,10 +3266,10 @@ static int virtnet_get_link_ksettings(struct net_device *dev,return 0 ; } -static int virtnet_send_notf_coal_cmds (struct virtnet_info *vi, -struct ethtool_coalesce *ec) +static int virtnet_send_tx_notf_coal_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec) { -struct scatterlist sgs_tx, sgs_rx; +struct scatterlist sgs_tx;int i; vi->ctrl->coal_tx.tx_usecs =cpu_to_le32 (ec->tx_coalesce_usecs);
@@ -3289,6 +3289,15 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi, vi->sq[i].intr_coal.max_packets = ec->tx_max_coalesced_frames; } +return 0 ; +} + +static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec) +{ +struct scatterlist sgs_rx; +int i; + vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames);sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx));
@@ -3309,6 +3318,22 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } +static int virtnet_send_notf_coal_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec) +{ +int err; + + err =virtnet_send_tx_notf_coal_cmds (vi, ec); +if (err) +return err; + + err =virtnet_send_rx_notf_coal_cmds (vi, ec); +if (err) +return err; + +return 0 ; +} +static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi,u16 vqn,u32 max_usecs,u32 max_packets) {
Signature · 1 line
2.19.1.6.gb485710b
PATCH v4 3/4 virtio-net: extract virtqueue coalescig cmd for reuse
In reply to Heng QiExtract commands to set virtqueue coalescing parameters for reuse by ethtool -Q, vq resize and netdim.
--- drivers/net/virtio_net.c | 106 +++++++++++++++++++++++---------------- 1 file changed, 64 insertions(+), 42 deletions(-)
drivers/net/virtio_net.c +64 -42
@@ -2849,6 +2849,58 @@ static void virtnet_cpu_notif_remove(struct virtnet_info *vi) &vi->node_dead); } +static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 vqn,u32 max_usecs,u32 max_packets) +{ +struct scatterlist sgs; + + vi->ctrl->coal_vq.vqn =cpu_to_le16 (vqn); + vi->ctrl->coal_vq.coal.max_usecs =cpu_to_le32 (max_usecs); + vi->ctrl->coal_vq.coal.max_packets =cpu_to_le32 (max_packets); +sg_init_one (&sgs, &vi->ctrl->coal_vq,sizeof (vi->ctrl->coal_vq)); + +if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , +VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET , + &sgs)) +return -EINVAL ; + +return 0 ; +} + +static int virtnet_send_rx_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 queue,u32 max_usecs, +u32 max_packets) +{ +int err; + + err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (queue), + max_usecs, max_packets); +if (err) +return err; + + vi->rq[queue].intr_coal.max_usecs = max_usecs; + vi->rq[queue].intr_coal.max_packets = max_packets; + +return 0 ; +} + +static int virtnet_send_tx_ctrl_coal_vq_cmd (struct virtnet_info *vi, +u16 queue,u32 max_usecs, +u32 max_packets) +{ +int err; + + err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (queue), + max_usecs, max_packets); +if (err) +return err; + + vi->sq[queue].intr_coal.max_usecs = max_usecs; + vi->sq[queue].intr_coal.max_packets = max_packets; + +return 0 ; +} + static void virtnet_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring, struct kernel_ethtool_ringparam *kernel_ring,
@@ -2906,14 +2958,11 @@ static int virtnet_set_ringparam(struct net_device *dev,* through the VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver * did not set any TX coalescing parameters, to 0. */ - err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (i), - vi->intr_coal_tx.max_usecs, - vi->intr_coal_tx.max_packets); + err =virtnet_send_tx_ctrl_coal_vq_cmd (vi, i, + vi->intr_coal_tx.max_usecs, + vi->intr_coal_tx.max_packets);if (err)return err; - - vi->sq[i].intr_coal.max_usecs = vi->intr_coal_tx.max_usecs; - vi->sq[i].intr_coal.max_packets = vi->intr_coal_tx.max_packets; }if (ring->rx_pending != rx_pending) {
@@ -2922,14 +2971,11 @@ static int virtnet_set_ringparam(struct net_device *dev,return err;/* The reason is same as the transmit virtqueue reset */ - err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (i), - vi->intr_coal_rx.max_usecs, - vi->intr_coal_rx.max_packets); + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, i, + vi->intr_coal_rx.max_usecs, + vi->intr_coal_rx.max_packets);if (err)return err; - - vi->rq[i].intr_coal.max_usecs = vi->intr_coal_rx.max_usecs; - vi->rq[i].intr_coal.max_packets = vi->intr_coal_rx.max_packets; } }
@@ -3334,48 +3380,24 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } -static int virtnet_send_ctrl_coal_vq_cmd (struct virtnet_info *vi, -u16 vqn,u32 max_usecs,u32 max_packets) -{ -struct scatterlist sgs; - - vi->ctrl->coal_vq.vqn =cpu_to_le16 (vqn); - vi->ctrl->coal_vq.coal.max_usecs =cpu_to_le32 (max_usecs); - vi->ctrl->coal_vq.coal.max_packets =cpu_to_le32 (max_packets); -sg_init_one (&sgs, &vi->ctrl->coal_vq,sizeof (vi->ctrl->coal_vq)); - -if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , -VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET , - &sgs)) -return -EINVAL ; - -return 0 ; -} -static int virtnet_send_notf_coal_vq_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec,u16 queue) {int err; - err =virtnet_send_ctrl_coal_vq_cmd (vi,rxq2vq (queue), - ec->rx_coalesce_usecs, - ec->rx_max_coalesced_frames); + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, queue, + ec->rx_coalesce_usecs, + ec->rx_max_coalesced_frames);if (err)return err; - vi->rq[queue].intr_coal.max_usecs = ec->rx_coalesce_usecs; - vi->rq[queue].intr_coal.max_packets = ec->rx_max_coalesced_frames; - - err =virtnet_send_ctrl_coal_vq_cmd (vi,txq2vq (queue), - ec->tx_coalesce_usecs, - ec->tx_max_coalesced_frames); + err =virtnet_send_tx_ctrl_coal_vq_cmd (vi, queue, + ec->tx_coalesce_usecs, + ec->tx_max_coalesced_frames);if (err)return err; - vi->sq[queue].intr_coal.max_usecs = ec->tx_coalesce_usecs; - vi->sq[queue].intr_coal.max_packets = ec->tx_max_coalesced_frames; -return 0 ; }
Signature · 1 line
2.19.1.6.gb485710b
PATCH v4 4/4 virtio-net: support rx netdim
In reply to Heng QiBy comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue.
---v2->v3:
- Some minor modifications.
v1->v2:
- Improved the judgment of dim switch conditions.
- Cancel the work when vq reset.
drivers/net/virtio_net.c | 191 ++++++++++++++++++++++++++++++++++----- 1 file changed, 169 insertions(+), 22 deletions(-)
drivers/net/virtio_net.c +169 -22
@@ -19,6 +19,7 @@#include <linux/average.h> #include <linux/filter.h> #include <linux/kernel.h> +#include <linux/dim.h> #include <net/route.h> #include <net/xdp.h> #include <net/net_failover.h>
@@ -172,6 +173,17 @@ struct receive_queue {struct virtnet_rq_stats stats; +/* The number of rx notifications */ +u16 calls; + +/* Is dynamic interrupt moderation enabled? */ +bool dim_enabled; + +/* Dynamic Interrupt Moderation */ +struct dim dim; + +u32 packets_in_napi; +struct virtnet_interrupt_coalesce intr_coal;/* Chain pages by the private ptr. */
@@ -305,6 +317,9 @@ struct virtnet_info {u8 duplex;u32 speed; +/* Is rx dynamic interrupt moderation enabled? */ +bool rx_dim_enabled; +/* Interrupt coalescing settings */ struct virtnet_interrupt_coalesce intr_coal_tx;struct virtnet_interrupt_coalesce intr_coal_rx;
@@ -2001,6 +2016,7 @@ static void skb_recv_done(struct virtqueue *rvq)struct virtnet_info *vi = rvq->vdev->priv;struct receive_queue *rq = &vi->rq[vq2rxq (rvq)]; + rq->calls++;virtqueue_napi_schedule (&rq->napi, rvq); }
@@ -2141,6 +2157,26 @@ static void virtnet_poll_cleantx(struct receive_queue *rq) } } +static void virtnet_rx_dim_work (struct work_struct *work); + +static void virtnet_rx_dim_update (struct virtnet_info *vi,struct receive_queue *rq) +{ +struct dim_sample cur_sample = {}; + +if (!rq->packets_in_napi) +return ; + +u64_stats_update_begin (&rq->stats.syncp); +dim_update_sample (rq->calls, +u64_stats_read (&rq->stats.packets), +u64_stats_read (&rq->stats.bytes), + &cur_sample); +u64_stats_update_end (&rq->stats.syncp); + +net_dim (&rq->dim, cur_sample); + rq->packets_in_napi =0 ; +} +static int virtnet_poll (struct napi_struct *napi,int budget) { struct receive_queue *rq =
@@ -2149,17 +2185,22 @@ static int virtnet_poll(struct napi_struct *napi, int budget)struct send_queue *sq;unsigned int received;unsigned int xdp_xmit =0 ; +bool napi_complete;virtnet_poll_cleantx (rq); received =virtnet_receive (rq, budget, &xdp_xmit); + rq->packets_in_napi += received;if (xdp_xmit &VIRTIO_XDP_REDIR )xdp_do_flush ();/* Out of packets? */ -if (received < budget) -virtqueue_napi_complete (napi, rq->vq, received); +if (received < budget) { + napi_complete =virtqueue_napi_complete (napi, rq->vq, received); +if (napi_complete && rq->dim_enabled) +virtnet_rx_dim_update (vi, rq); + }if (xdp_xmit &VIRTIO_XDP_TX ) { sq =virtnet_xdp_get_sq (vi);
@@ -2179,6 +2220,7 @@ static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index)virtnet_napi_tx_disable (&vi->sq[qp_index].napi);napi_disable (&vi->rq[qp_index].napi);xdp_rxq_info_unreg (&vi->rq[qp_index].xdp_rxq); +cancel_work_sync (&vi->rq[qp_index].dim.work); }static int virtnet_enable_queue_pair (struct virtnet_info *vi,int qp_index)
@@ -2196,6 +2238,9 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)if (err <0 ) goto err_xdp_reg_mem_model; +INIT_WORK (&vi->rq[qp_index].dim.work, virtnet_rx_dim_work); + vi->rq[qp_index].dim.mode =DIM_CQ_PERIOD_MODE_START_FROM_EQE ; +virtnet_napi_enable (vi->rq[qp_index].vq, &vi->rq[qp_index].napi);virtnet_napi_tx_enable (vi, vi->sq[qp_index].vq, &vi->sq[qp_index].napi);
@@ -2393,8 +2438,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi, qindex = rq - vi->rq; -if (running) +if (running) {napi_disable (&rq->napi); +cancel_work_sync (&rq->dim.work); + } err =virtqueue_resize (rq->vq, ring_num, virtnet_rq_free_unused_buf);if (err)
@@ -2403,8 +2450,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi,if (!try_fill_recv (vi, rq,GFP_KERNEL ))schedule_delayed_work (&vi->refill,0 ); -if (running) +if (running) { +INIT_WORK (&rq->dim.work, virtnet_rx_dim_work);virtnet_napi_enable (rq->vq, &rq->napi); + }return err; }
@@ -3341,24 +3390,55 @@ static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi,static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec) { +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; +bool update = false, switch_dim;struct scatterlist sgs_rx;int i; - vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); - vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames); -sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx)); - -if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , -VIRTIO_NET_CTRL_NOTF_COAL_RX_SET , - &sgs_rx)) -return -EINVAL ; + switch_dim = rx_ctrl_dim_on != vi->rx_dim_enabled; +if (switch_dim) { +if (rx_ctrl_dim_on) { +if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) { + vi->rx_dim_enabled = true; +for (i =0 ; i < vi->max_queue_pairs; i++) + vi->rq[i].dim_enabled = true; + }else { +return -EOPNOTSUPP ; + } + }else { + vi->rx_dim_enabled = false; +for (i =0 ; i < vi->max_queue_pairs; i++) + vi->rq[i].dim_enabled = false; + } + }else { +if (ec->rx_coalesce_usecs != vi->intr_coal_rx.max_usecs || + ec->rx_max_coalesced_frames != vi->intr_coal_rx.max_packets) + update = true; -/* Save parameters */ - vi->intr_coal_rx.max_usecs = ec->rx_coalesce_usecs; - vi->intr_coal_rx.max_packets = ec->rx_max_coalesced_frames; -for (i =0 ; i < vi->max_queue_pairs; i++) { - vi->rq[i].intr_coal.max_usecs = ec->rx_coalesce_usecs; - vi->rq[i].intr_coal.max_packets = ec->rx_max_coalesced_frames; +if (vi->rx_dim_enabled) { +if (update) +return -EINVAL ; + }else { +/* Since the per-queue coalescing params can be set, +* we need apply the global new params even if they +* are not updated. +*/ + vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); + vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames); +sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx)); + +if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , +VIRTIO_NET_CTRL_NOTF_COAL_RX_SET , + &sgs_rx)) +return -EINVAL ; + + vi->intr_coal_rx.max_usecs = ec->rx_coalesce_usecs; + vi->intr_coal_rx.max_packets = ec->rx_max_coalesced_frames; +for (i =0 ; i < vi->max_queue_pairs; i++) { + vi->rq[i].intr_coal.max_usecs = ec->rx_coalesce_usecs; + vi->rq[i].intr_coal.max_packets = ec->rx_max_coalesced_frames; + } + } }return 0 ;
@@ -3380,15 +3460,54 @@ static int virtnet_send_notf_coal_cmds(struct virtnet_info *vi,return 0 ; } +static int virtnet_send_rx_notf_coal_vq_cmds (struct virtnet_info *vi, +struct ethtool_coalesce *ec, +u16 queue) +{ +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; +bool cur_rx_dim = vi->rq[queue].dim_enabled; +bool update = false, switch_dim; +u32 max_usecs, max_packets; +int err; + + switch_dim = rx_ctrl_dim_on != cur_rx_dim; +if (switch_dim) { +if (rx_ctrl_dim_on) + vi->rq[queue].dim_enabled = true; +else + vi->rq[queue].dim_enabled = false; + }else { + max_usecs = vi->rq[queue].intr_coal.max_usecs; + max_packets = vi->rq[queue].intr_coal.max_packets; +if (ec->rx_coalesce_usecs != max_usecs || + ec->rx_max_coalesced_frames != max_packets) + update = true; + +if (cur_rx_dim) { +if (update) +return -EINVAL ; + }else { +if (!update) +return 0 ; + + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, queue, + ec->rx_coalesce_usecs, + ec->rx_max_coalesced_frames); +if (err) +return err; + } + } + +return 0 ; +} +static int virtnet_send_notf_coal_vq_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec,u16 queue) {int err; - err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, queue, - ec->rx_coalesce_usecs, - ec->rx_max_coalesced_frames); + err =virtnet_send_rx_notf_coal_vq_cmds (vi, ec, queue);if (err)return err;
@@ -3401,6 +3520,32 @@ static int virtnet_send_notf_coal_vq_cmds(struct virtnet_info *vi,return 0 ; } +static void virtnet_rx_dim_work (struct work_struct *work) +{ + struct dim *dim = container_of(work, struct dim, work); +struct receive_queue *rq =container_of (dim, + struct receive_queue, dim); +struct virtnet_info *vi = rq->vq->vdev->priv; +struct net_device *dev = vi->dev; +struct dim_cq_moder update_moder; +int qnum = rq - vi->rq, err; + + update_moder =net_dim_get_rx_moderation (dim->mode, dim->profile_ix); +if (update_moder.usec != vi->rq[qnum].intr_coal.max_usecs || + update_moder.pkts != vi->rq[qnum].intr_coal.max_packets) { +rtnl_lock (); + err =virtnet_send_rx_ctrl_coal_vq_cmd (vi, qnum, + update_moder.usec, + update_moder.pkts); +if (err) +pr_debug ("%s: Failed to send dim parameters on rxq%d\n" , + dev->name, (int )(rq - vi->rq)); +rtnl_unlock (); + } + + dim->state =DIM_START_MEASURE ; +} +static int virtnet_coal_params_supported (struct ethtool_coalesce *ec) {/* usecs coalescing is supported only if VIRTIO_NET_F_NOTF_COAL
@@ -3482,6 +3627,7 @@ static int virtnet_get_coalesce(struct net_device *dev, ec->tx_coalesce_usecs = vi->intr_coal_tx.max_usecs; ec->tx_max_coalesced_frames = vi->intr_coal_tx.max_packets; ec->rx_max_coalesced_frames = vi->intr_coal_rx.max_packets; + ec->use_adaptive_rx_coalesce = vi->rx_dim_enabled; }else { ec->rx_max_coalesced_frames =1 ;
@@ -3539,6 +3685,7 @@ static int virtnet_get_per_queue_coalesce(struct net_device *dev, ec->tx_coalesce_usecs = vi->sq[queue].intr_coal.max_usecs; ec->tx_max_coalesced_frames = vi->sq[queue].intr_coal.max_packets; ec->rx_max_coalesced_frames = vi->rq[queue].intr_coal.max_packets; + ec->use_adaptive_rx_coalesce = vi->rq[queue].dim_enabled; }else { ec->rx_max_coalesced_frames =1 ;
@@ -3664,7 +3811,7 @@ static int virtnet_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info)static const struct ethtool_ops virtnet_ethtool_ops = { .supported_coalesce_params =ETHTOOL_COALESCE_MAX_FRAMES | -ETHTOOL_COALESCE_USECS , +ETHTOOL_COALESCE_USECS |ETHTOOL_COALESCE_USE_ADAPTIVE_RX , .get_drvinfo = virtnet_get_drvinfo, .get_link = ethtool_op_get_link, .get_ringparam = virtnet_get_ringparam,
Signature · 1 line
2.19.1.6.gb485710b
Re: [PATCH net-next v4 4/4] virtio-net: support rx netdim
Quoted 126 lines · Heng Qi
By comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue.
Signed-off-by Heng Qi <[email protected]>---
v2->v3:
- Some minor modifications.
v1->v2:
- Improved the judgment of dim switch conditions.
- Cancel the work when vq reset.drivers/net/virtio_net.c | 191 ++++++++++++++++++++++++++++++++++----- 1 file changed, 169 insertions(+), 22 deletions(-)drivers/net/virtio_net.c +44
-2@@ -19,6 +19,7 @@#include <linux/average.h> #include <linux/filter.h> #include <linux/kernel.h> +#include <linux/dim.h> #include <net/route.h> #include <net/xdp.h> #include <net/net_failover.h> @@ -172,6 +173,17 @@ struct receive_queue {struct virtnet_rq_stats stats; +/* The number of rx notifications */ +u16 calls; + +/* Is dynamic interrupt moderation enabled? */ +bool dim_enabled; + +/* Dynamic Interrupt Moderation */ +struct dim dim; + +u32 packets_in_napi; +struct virtnet_interrupt_coalesce intr_coal;/* Chain pages by the private ptr. */ @@ -305,6 +317,9 @@ struct virtnet_info {u8 duplex;u32 speed; +/* Is rx dynamic interrupt moderation enabled? */ +bool rx_dim_enabled; +/* Interrupt coalescing settings */ struct virtnet_interrupt_coalesce intr_coal_tx;struct virtnet_interrupt_coalesce intr_coal_rx;@@ -2001,6 +2016,7 @@ static void skb_recv_done(struct virtqueue *rvq)struct virtnet_info *vi = rvq->vdev->priv;struct receive_queue *rq = &vi->rq[vq2rxq (rvq)]; + rq->calls++;virtqueue_napi_schedule (&rq->napi, rvq); }@@ -2141,6 +2157,26 @@ static void virtnet_poll_cleantx(struct receive_queue *rq) } } +static void virtnet_rx_dim_work (struct work_struct *work); + +static void virtnet_rx_dim_update (struct virtnet_info *vi,struct receive_queue *rq) +{ +struct dim_sample cur_sample = {}; + +if (!rq->packets_in_napi) +return ; + +u64_stats_update_begin (&rq->stats.syncp); +dim_update_sample (rq->calls, +u64_stats_read (&rq->stats.packets), +u64_stats_read (&rq->stats.bytes), + &cur_sample); +u64_stats_update_end (&rq->stats.syncp); + +net_dim (&rq->dim, cur_sample); + rq->packets_in_napi =0 ; +} +static int virtnet_poll (struct napi_struct *napi,int budget) { struct receive_queue *rq =@@ -2149,17 +2185,22 @@ static int virtnet_poll(struct napi_struct *napi, int budget)struct send_queue *sq;unsigned int received;unsigned int xdp_xmit =0 ; +bool napi_complete;virtnet_poll_cleantx (rq); received =virtnet_receive (rq, budget, &xdp_xmit); + rq->packets_in_napi += received;if (xdp_xmit &VIRTIO_XDP_REDIR )xdp_do_flush ();/* Out of packets? */ -if (received < budget) -virtqueue_napi_complete (napi, rq->vq, received); +if (received < budget) { + napi_complete =virtqueue_napi_complete (napi, rq->vq, received); +if (napi_complete && rq->dim_enabled) +virtnet_rx_dim_update (vi, rq); + }if (xdp_xmit &VIRTIO_XDP_TX ) { sq =virtnet_xdp_get_sq (vi);@@ -2179,6 +2220,7 @@ static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index)virtnet_napi_tx_disable (&vi->sq[qp_index].napi);napi_disable (&vi->rq[qp_index].napi);xdp_rxq_info_unreg (&vi->rq[qp_index].xdp_rxq); +cancel_work_sync (&vi->rq[qp_index].dim.work); }static int virtnet_enable_queue_pair (struct virtnet_info *vi,int qp_index)
drivers/net/virtio_net.c static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index) · line 2242
Quoted 5 lines
drivers/net/virtio_net.c +2
-0@@ -2196,6 +2238,9 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)if (err <0 ) goto err_xdp_reg_mem_model; +INIT_WORK (&vi->rq[qp_index].dim.work, virtnet_rx_dim_work); + vi->rq[qp_index].dim.mode =DIM_CQ_PERIOD_MODE_START_FROM_EQE ;
So in V2, you explained it can be done here but I want to know why it must be done here.
For example, the refill_work is initialized in alloc_queues().
Quoted 39 lines
drivers/net/virtio_net.c +9
-4+virtnet_napi_enable (vi->rq[qp_index].vq, &vi->rq[qp_index].napi);virtnet_napi_tx_enable (vi, vi->sq[qp_index].vq, &vi->sq[qp_index].napi);@@ -2393,8 +2438,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi, qindex = rq - vi->rq; -if (running) +if (running) {napi_disable (&rq->napi); +cancel_work_sync (&rq->dim.work); + } err =virtqueue_resize (rq->vq, ring_num, virtnet_rq_free_unused_buf);if (err)@@ -2403,8 +2450,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi,if (!try_fill_recv (vi, rq,GFP_KERNEL ))schedule_delayed_work (&vi->refill,0 ); -if (running) +if (running) { +INIT_WORK (&rq->dim.work, virtnet_rx_dim_work);virtnet_napi_enable (rq->vq, &rq->napi); + }return err; }@@ -3341,24 +3390,55 @@ static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi,static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec) { +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; +bool update = false, switch_dim;struct scatterlist sgs_rx;int i; - vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); - vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames);
drivers/net/virtio_net.c static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi, · line 3401
Quoted 10 lines
drivers/net/virtio_net.c +4
-6-sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx)); - -if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , -VIRTIO_NET_CTRL_NOTF_COAL_RX_SET , - &sgs_rx)) -return -EINVAL ; + switch_dim = rx_ctrl_dim_on != vi->rx_dim_enabled; +if (switch_dim) { +if (rx_ctrl_dim_on) { +if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) {
So basically, I'm asking why we need to duplicate the check here?
E.g caller has done the check for us:
if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_NOTF_COAL))
ret = virtnet_send_notf_coal_cmds(vi, ec);
else
ret = virtnet_coal_params_supported(ec);?
Please also check other nested if/else, usually, too many levels of nesting is a hint that the logic needs to be optimized.
Thanks
Re: [PATCH net-next v4 4/4] virtio-net: support rx netdim
Quoted 191 lines · Jason Wang
Quoted 126 lines · Heng Qi
By comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue.
Signed-off-by Heng Qi <[email protected]>---
v2->v3:
- Some minor modifications.
v1->v2:
- Improved the judgment of dim switch conditions.
- Cancel the work when vq reset.drivers/net/virtio_net.c | 191 ++++++++++++++++++++++++++++++++++----- 1 file changed, 169 insertions(+), 22 deletions(-)drivers/net/virtio_net.c +44
-2@@ -19,6 +19,7 @@#include <linux/average.h> #include <linux/filter.h> #include <linux/kernel.h> +#include <linux/dim.h> #include <net/route.h> #include <net/xdp.h> #include <net/net_failover.h> @@ -172,6 +173,17 @@ struct receive_queue {struct virtnet_rq_stats stats; +/* The number of rx notifications */ +u16 calls; + +/* Is dynamic interrupt moderation enabled? */ +bool dim_enabled; + +/* Dynamic Interrupt Moderation */ +struct dim dim; + +u32 packets_in_napi; +struct virtnet_interrupt_coalesce intr_coal;/* Chain pages by the private ptr. */ @@ -305,6 +317,9 @@ struct virtnet_info {u8 duplex;u32 speed; +/* Is rx dynamic interrupt moderation enabled? */ +bool rx_dim_enabled; +/* Interrupt coalescing settings */ struct virtnet_interrupt_coalesce intr_coal_tx;struct virtnet_interrupt_coalesce intr_coal_rx;@@ -2001,6 +2016,7 @@ static void skb_recv_done(struct virtqueue *rvq)struct virtnet_info *vi = rvq->vdev->priv;struct receive_queue *rq = &vi->rq[vq2rxq (rvq)]; + rq->calls++;virtqueue_napi_schedule (&rq->napi, rvq); }@@ -2141,6 +2157,26 @@ static void virtnet_poll_cleantx(struct receive_queue *rq) } } +static void virtnet_rx_dim_work (struct work_struct *work); + +static void virtnet_rx_dim_update (struct virtnet_info *vi,struct receive_queue *rq) +{ +struct dim_sample cur_sample = {}; + +if (!rq->packets_in_napi) +return ; + +u64_stats_update_begin (&rq->stats.syncp); +dim_update_sample (rq->calls, +u64_stats_read (&rq->stats.packets), +u64_stats_read (&rq->stats.bytes), + &cur_sample); +u64_stats_update_end (&rq->stats.syncp); + +net_dim (&rq->dim, cur_sample); + rq->packets_in_napi =0 ; +} +static int virtnet_poll (struct napi_struct *napi,int budget) { struct receive_queue *rq =@@ -2149,17 +2185,22 @@ static int virtnet_poll(struct napi_struct *napi, int budget)struct send_queue *sq;unsigned int received;unsigned int xdp_xmit =0 ; +bool napi_complete;virtnet_poll_cleantx (rq); received =virtnet_receive (rq, budget, &xdp_xmit); + rq->packets_in_napi += received;if (xdp_xmit &VIRTIO_XDP_REDIR )xdp_do_flush ();/* Out of packets? */ -if (received < budget) -virtqueue_napi_complete (napi, rq->vq, received); +if (received < budget) { + napi_complete =virtqueue_napi_complete (napi, rq->vq, received); +if (napi_complete && rq->dim_enabled) +virtnet_rx_dim_update (vi, rq); + }if (xdp_xmit &VIRTIO_XDP_TX ) { sq =virtnet_xdp_get_sq (vi);@@ -2179,6 +2220,7 @@ static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index)virtnet_napi_tx_disable (&vi->sq[qp_index].napi);napi_disable (&vi->rq[qp_index].napi);xdp_rxq_info_unreg (&vi->rq[qp_index].xdp_rxq); +cancel_work_sync (&vi->rq[qp_index].dim.work); }static int virtnet_enable_queue_pair (struct virtnet_info *vi,int qp_index)drivers/net/virtio_net.c static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index) · line 2242
Quoted 5 lines
drivers/net/virtio_net.c +2
-0@@ -2196,6 +2238,9 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)if (err <0 ) goto err_xdp_reg_mem_model; +INIT_WORK (&vi->rq[qp_index].dim.work, virtnet_rx_dim_work); + vi->rq[qp_index].dim.mode =DIM_CQ_PERIOD_MODE_START_FROM_EQE ;So in V2, you explained it can be done here but I want to know why it must be done here.
For example, the
refill_workis initialized inalloc_queues().Quoted 39 lines
drivers/net/virtio_net.c +9
-4+virtnet_napi_enable (vi->rq[qp_index].vq, &vi->rq[qp_index].napi);virtnet_napi_tx_enable (vi, vi->sq[qp_index].vq, &vi->sq[qp_index].napi);@@ -2393,8 +2438,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi, qindex = rq - vi->rq; -if (running) +if (running) {napi_disable (&rq->napi); +cancel_work_sync (&rq->dim.work); + } err =virtqueue_resize (rq->vq, ring_num, virtnet_rq_free_unused_buf);if (err)@@ -2403,8 +2450,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi,if (!try_fill_recv (vi, rq,GFP_KERNEL ))schedule_delayed_work (&vi->refill,0 ); -if (running) +if (running) { +INIT_WORK (&rq->dim.work, virtnet_rx_dim_work);virtnet_napi_enable (rq->vq, &rq->napi); + }return err; }@@ -3341,24 +3390,55 @@ static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi,static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec) { +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; +bool update = false, switch_dim;struct scatterlist sgs_rx;int i; - vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); - vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames);drivers/net/virtio_net.c static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi, · line 3401
Quoted 10 lines
drivers/net/virtio_net.c +4
-6-sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx)); - -if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , -VIRTIO_NET_CTRL_NOTF_COAL_RX_SET , - &sgs_rx)) -return -EINVAL ; + switch_dim = rx_ctrl_dim_on != vi->rx_dim_enabled; +if (switch_dim) { +if (rx_ctrl_dim_on) { +if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) {So basically, I'm asking why we need to duplicate the check here?
Quoted 6 lines
E.g caller has done the check for us:
if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_NOTF_COAL)) ret = virtnet_send_notf_coal_cmds(vi, ec); else ret = virtnet_coal_params_supported(ec);
Speak too fast, they have different features :(
But the point still, the logic needs some optimizations to reduce the levels of nesting if/else.
Thanks
Quoted 7 lines
?
Please also check other nested if/else, usually, too many levels of nesting is a hint that the logic needs to be optimized.
Thanks
Re: [PATCH net-next v4 4/4] virtio-net: support rx netdim
In reply to Heng QiOn Mon, 20 Nov 2023 20:37:34 +0800, Heng Qi wrote:
<...>
drivers/net/virtio_net.c static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index) · line 2223
Quoted 5 lines
drivers/net/virtio_net.c +1
-0@@ -2179,6 +2220,7 @@ static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index)virtnet_napi_tx_disable (&vi->sq[qp_index].napi);napi_disable (&vi->rq[qp_index].napi);xdp_rxq_info_unreg (&vi->rq[qp_index].xdp_rxq); +cancel_work_sync (&vi->rq[qp_index].dim.work);
I'm not sure, but please check if here may cause deadlock:
rtnl_lock held ->
.ndo_stop ->
virtnet_disable_queue_pair() -> cancel_work_sync() ->
virtnet_rx_dim_work() ->
rtnl_lock()
Quoted 3 lines
drivers/net/virtio_net.c +0
-0}static int virtnet_enable_queue_pair (struct virtnet_info *vi,int qp_index)
<...>
Re: [PATCH net-next v4 4/4] virtio-net: support rx netdim
In reply to Jason WangQuoted 129 lines · Jason Wang
Quoted 128 lines · Heng Qi
By comparing the traffic information in the complete napi processes, let the virtio-net driver automatically adjust the coalescing moderation parameters of each receive queue.
Signed-off-by Heng Qi <[email protected]>---
v2->v3:
- Some minor modifications.
v1->v2:
- Improved the judgment of dim switch conditions.
- Cancel the work when vq reset.drivers/net/virtio_net.c | 191 ++++++++++++++++++++++++++++++++++----- 1 file changed, 169 insertions(+), 22 deletions(-)drivers/net/virtio_net.c +44
-2@@ -19,6 +19,7 @@#include <linux/average.h> #include <linux/filter.h> #include <linux/kernel.h> +#include <linux/dim.h> #include <net/route.h> #include <net/xdp.h> #include <net/net_failover.h> @@ -172,6 +173,17 @@ struct receive_queue {struct virtnet_rq_stats stats; +/* The number of rx notifications */ +u16 calls; + +/* Is dynamic interrupt moderation enabled? */ +bool dim_enabled; + +/* Dynamic Interrupt Moderation */ +struct dim dim; + +u32 packets_in_napi; +struct virtnet_interrupt_coalesce intr_coal;/* Chain pages by the private ptr. */ @@ -305,6 +317,9 @@ struct virtnet_info {u8 duplex;u32 speed; +/* Is rx dynamic interrupt moderation enabled? */ +bool rx_dim_enabled; +/* Interrupt coalescing settings */ struct virtnet_interrupt_coalesce intr_coal_tx;struct virtnet_interrupt_coalesce intr_coal_rx;@@ -2001,6 +2016,7 @@ static void skb_recv_done(struct virtqueue *rvq)struct virtnet_info *vi = rvq->vdev->priv;struct receive_queue *rq = &vi->rq[vq2rxq (rvq)]; + rq->calls++;virtqueue_napi_schedule (&rq->napi, rvq); }@@ -2141,6 +2157,26 @@ static void virtnet_poll_cleantx(struct receive_queue *rq) } } +static void virtnet_rx_dim_work (struct work_struct *work); + +static void virtnet_rx_dim_update (struct virtnet_info *vi,struct receive_queue *rq) +{ +struct dim_sample cur_sample = {}; + +if (!rq->packets_in_napi) +return ; + +u64_stats_update_begin (&rq->stats.syncp); +dim_update_sample (rq->calls, +u64_stats_read (&rq->stats.packets), +u64_stats_read (&rq->stats.bytes), + &cur_sample); +u64_stats_update_end (&rq->stats.syncp); + +net_dim (&rq->dim, cur_sample); + rq->packets_in_napi =0 ; +} +static int virtnet_poll (struct napi_struct *napi,int budget) { struct receive_queue *rq =@@ -2149,17 +2185,22 @@ static int virtnet_poll(struct napi_struct *napi, int budget)struct send_queue *sq;unsigned int received;unsigned int xdp_xmit =0 ; +bool napi_complete;virtnet_poll_cleantx (rq); received =virtnet_receive (rq, budget, &xdp_xmit); + rq->packets_in_napi += received;if (xdp_xmit &VIRTIO_XDP_REDIR )xdp_do_flush ();/* Out of packets? */ -if (received < budget) -virtqueue_napi_complete (napi, rq->vq, received); +if (received < budget) { + napi_complete =virtqueue_napi_complete (napi, rq->vq, received); +if (napi_complete && rq->dim_enabled) +virtnet_rx_dim_update (vi, rq); + }if (xdp_xmit &VIRTIO_XDP_TX ) { sq =virtnet_xdp_get_sq (vi);@@ -2179,6 +2220,7 @@ static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index)virtnet_napi_tx_disable (&vi->sq[qp_index].napi);napi_disable (&vi->rq[qp_index].napi);xdp_rxq_info_unreg (&vi->rq[qp_index].xdp_rxq); +cancel_work_sync (&vi->rq[qp_index].dim.work); }static int virtnet_enable_queue_pair (struct virtnet_info *vi,int qp_index)@@ -2196,6 +2238,9 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)if (err <0 ) goto err_xdp_reg_mem_model;
Quoted 4 lines
drivers/net/virtio_net.c static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index) · line 2242
Quoted 2 lines
drivers/net/virtio_net.c +2
-0+INIT_WORK (&vi->rq[qp_index].dim.work, virtnet_rx_dim_work); + vi->rq[qp_index].dim.mode =DIM_CQ_PERIOD_MODE_START_FROM_EQE ;So in V2, you explained it can be done here but I want to know why it must be done here.
It is not must be done here. We can place it in probe and make sure that INIT_WORK() is done before napi is enabled for the first time.
So then I'll don't call INIT_WORK() every time after "napi_disable -> napi_enable" happens, and use the following process:
Call INIT_WORK() in the driver probe and do cancel_work() after each related napi_disable.
This will be clearer.
Additionally, Yinjun Zhang found that cancel_work_sync() will cause a deadlock when ndo_stop and virtnet_rx_dim_work occurs at the same time, so cancel_work() will be used.
Quoted 40 lines
For example, the
refill_workis initialized inalloc_queues().Quoted 37 lines
drivers/net/virtio_net.c +9
-2+virtnet_napi_enable (vi->rq[qp_index].vq, &vi->rq[qp_index].napi);virtnet_napi_tx_enable (vi, vi->sq[qp_index].vq, &vi->sq[qp_index].napi);@@ -2393,8 +2438,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi, qindex = rq - vi->rq; -if (running) +if (running) {napi_disable (&rq->napi); +cancel_work_sync (&rq->dim.work); + } err =virtqueue_resize (rq->vq, ring_num, virtnet_rq_free_unused_buf);if (err)@@ -2403,8 +2450,10 @@ static int virtnet_rx_resize(struct virtnet_info *vi,if (!try_fill_recv (vi, rq,GFP_KERNEL ))schedule_delayed_work (&vi->refill,0 ); -if (running) +if (running) { +INIT_WORK (&rq->dim.work, virtnet_rx_dim_work);virtnet_napi_enable (rq->vq, &rq->napi); + }return err; }@@ -3341,24 +3390,55 @@ static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi,static int virtnet_send_rx_notf_coal_cmds (struct virtnet_info *vi,struct ethtool_coalesce *ec) { +bool rx_ctrl_dim_on = !!ec->use_adaptive_rx_coalesce; +bool update = false, switch_dim;struct scatterlist sgs_rx;int i;
Quoted 13 lines
drivers/net/virtio_net.c static int virtnet_send_tx_notf_coal_cmds(struct virtnet_info *vi, · line 3401
Quoted 12 lines
drivers/net/virtio_net.c +4
-8- vi->ctrl->coal_rx.rx_usecs =cpu_to_le32 (ec->rx_coalesce_usecs); - vi->ctrl->coal_rx.rx_max_packets =cpu_to_le32 (ec->rx_max_coalesced_frames); -sg_init_one (&sgs_rx, &vi->ctrl->coal_rx,sizeof (vi->ctrl->coal_rx)); - -if (!virtnet_send_command (vi,VIRTIO_NET_CTRL_NOTF_COAL , -VIRTIO_NET_CTRL_NOTF_COAL_RX_SET , - &sgs_rx)) -return -EINVAL ; + switch_dim = rx_ctrl_dim_on != vi->rx_dim_enabled; +if (switch_dim) { +if (rx_ctrl_dim_on) { +if (virtio_has_feature (vi->vdev,VIRTIO_NET_F_VQ_NOTF_COAL )) {So basically, I'm asking why we need to duplicate the check here?
Here is VIRTIO_NET_F_*VQ*_NOTF_COAL.
Quoted 8 lines
E.g caller has done the check for us:
if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_NOTF_COAL)) ret = virtnet_send_notf_coal_cmds(vi, ec); else ret = virtnet_coal_params_supported(ec);
Quoted 4 lines
?
Please also check other nested if/else, usually, too many levels of nesting is a hint that the logic needs to be optimized.
I will optimize this.
Thanks!
Quoted 2 lines
Thanks
Re: [PATCH net-next v4 4/4] virtio-net: support rx netdim
In reply to Yinjun ZhangQuoted 14 lines · Yinjun Zhang
On Mon, 20 Nov 2023 20:37:34 +0800, Heng Qi wrote:
<...>drivers/net/virtio_net.c static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index) · line 2223
Quoted 5 lines
drivers/net/virtio_net.c +1
-0@@ -2179,6 +2220,7 @@ static void virtnet_disable_queue_pair(struct virtnet_info *vi, int qp_index)virtnet_napi_tx_disable (&vi->sq[qp_index].napi);napi_disable (&vi->rq[qp_index].napi);xdp_rxq_info_unreg (&vi->rq[qp_index].xdp_rxq); +cancel_work_sync (&vi->rq[qp_index].dim.work);I'm not sure, but please check if here may cause deadlock:
rtnl_lockheld ->
.ndo_stop ->
virtnet_disable_queue_pair()->cancel_work_sync()->
virtnet_rx_dim_work()->
rtnl_lock()
Good catch!
I tried using cancel_work() which solves the problem. Additionally I tested the scenario of ctrl cmd/.remove/.ndo_stop()/dim_work when there is a lot of concurrency, and this can work very well.
Thanks!
Quoted 5 lines
Quoted 4 lines
drivers/net/virtio_net.c +0
-0}static int virtnet_enable_queue_pair (struct virtnet_info *vi,int qp_index)<...>