Skip to contentSkip to conversation

Shaping Incoming Traffic

LARTC Daniel Bergqvist [email protected] 1 participant 2 messages Nov 17, 2000 – Nov 24, 2000

lore
Share & tools
lore

Daniel Bergqvist [email protected]

author
#0 lore raw

<PRE>I have used rshaper and it works fine.

You may also look at &quot;ingres&quot;. If you do, see the discussions about ingress
on the &quot;Linux-Diffserv&quot; mailing list <A HREF="http://icawww1.epfl.ch/linux-diffserv/.">http://icawww1.epfl.ch/linux-diffserv/.</A>

Regards Daniel

Från: <A HREF="mailto:[email protected]">[email protected]</A> [mailto:<A HREF="mailto:[email protected]">[email protected]</A>]För Fredrik Björk
At 20:09 2000-11-16 +0000, you wrote:
&gt;<i>Is there no way to shape incoming traffic?
</I>
Try
<A HREF="http://freshmeat.net/projects/rshaper/?highlight=rshaper">http://freshmeat.net/projects/rshaper/?highlight=rshaper</A>
for rshaper. I haven't tried it myself, but they use a metod where they
delay the notification of received packets to the sending host.

/Fredrik

__________________________________________________________________________
Fredrik Björk Seaside Internet/Varberg Energi <A HREF="mailto:[email protected]">[email protected]</A>

_______________________________________________
LARTC mailing list / <A HREF="mailto:[email protected]">[email protected]</A>
<A HREF="http://mailman.ds9a.nl/mailman/listinfo/lartc">http://mailman.ds9a.nl/mailman/listinfo/lartc</A> HOWTO:
<A HREF="http://ds9a.nl/2.4Routing/">http://ds9a.nl/2.4Routing/</A>

</PRE>

author
#1 lore raw

SV: [LARTC] shaping incoming traffic

<PRE>Limit the outgoing traffic to the internal network (to the students). You may start with a limit of 64kbit/s to the students.

Regards
Daniel

-----Ursprungligt meddelande-----
Från: <A HREF="mailto:[email protected]">[email protected]</A> [mailto:<A HREF="mailto:[email protected]">[email protected]</A>]För steeman philip
I'm just learning to use QOS, and it seems very powerfull.
Can some-one give me a hint what to do for the following (simplified)
problem.

           128kbit   +------+  10Mb  +----------+ 10Mb
provider-------------+router+--------+linux-masq+------------ internal
network
                     +------+        +----------+
                        eth0        eth1.1.14.1

The only thing I can change things on, is the linux-computer. This computer is a masquerading computer (I don't know if this poses problems?)

The problem:

On the internal network all the students are downloading as fast(slow) as they can.
So the incoming traffic is almost 100%.
The outgoing traffic is very low (max 20%).

Someone in our library wants to telnet from an inside computer to an outside computer. This works extreme slow (unworkable).

Is there a solution for this problem?

Thanks in advance,

Philip

</PRE>