thermal: k3: Add support for bandgap sensors
Subsystems (3)
v4 cover thermal: k3: Add support for bandgap sensors
Add VTM thermal support. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Add support for bandgap sensors. Currently reading temperatures and trend computing is supported.
Changes in v4:
* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.
Changes in v3:
* Fixed errors seen with:
dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
Changes in v2:
* Fixed yaml errors
* renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi to follow the convention for k3 family.
Keerthy (4):
dt-bindings: thermal: k3: Add VTM bindings documentation
thermal: k3: Add support for bandgap sensors
arm64: dts: ti: am654: Add thermal zones
arm64: dts: ti: am6: Add VTM node
.../bindings/thermal/ti,am654-thermal.yaml | 56 ++++ arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 + .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++ drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 288 ++++++++++++++++++ 6 files changed, 412 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi create mode 100644 drivers/thermal/k3_bandgap.c
Signature · 1 line
2.17.1
PATCH RESEND v4 1/4 dt-bindings: thermal: k3: Add VTM bindings documentation
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
--- .../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml new file +56 -0
@@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments AM654 VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,am654-vtm + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + vtm: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x0 0x42050000 0x0 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Signature · 1 line
2.17.1
Re: [RESEND PATCH v4 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation
Quoted 9 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Quoted 6 lines
Signed-off-by Keerthy <[email protected]>--- .../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
PATCH RESEND v4 2/4 thermal: k3: Add support for bandgap sensors
In reply to KeerthyThe bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures and creating work to periodically read temperatures from the zones are supported.
There are no active/passive cooling agent supported.
---
Changes in v4:
* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.
drivers/thermal/Kconfig | 11 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 287 +++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 drivers/thermal/k3_bandgap.c
drivers/thermal/Kconfig +11 -0
@@ -251,6 +251,17 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality and also trend + computation. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620
drivers/thermal/Makefile +1 -0
@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
drivers/thermal/k3_bandgap.c new file +287 -0
287 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 32 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures and creating work to periodically read temperatures from the zones are supported.
There are no active/passive cooling agent supported.Signed-off-by Keerthy <[email protected]>---
Changes in v4:
* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.drivers/thermal/Kconfig | 11 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 287 +++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +0
-0@@ -251,6 +251,17 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed.
drivers/thermal/Kconfig config IMX_THERMAL · line 263
Quoted 10 lines
drivers/thermal/Kconfig +10
-0+config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality and also trend + computation.
trend is now removed :)
Quoted 28 lines
drivers/thermal/Kconfig +0
-0config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +7
-0@@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ +
drivers/thermal/k3_bandgap.c line 17
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/workqueue.h>
Please check all the headers are needed, AFAICT workqueue.h and spinlock.h are not.
Quoted 52 lines
drivers/thermal/k3_bandgap.c new file +52
-0+#include <linux/thermal.h> +#include <linux/of.h> + +#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xf +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8 +#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 ,
drivers/thermal/k3_bandgap.c line 79
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , + 123400, 123800, 124200, 124600, 124900, 125000, +};
Can be this array replaced by an initialization array with a formula?
Why do we have most of the time a step of 400 then suddenly 500 and 400 again? eg. 30600, 31000, 31400, 31900, 32500, 33000, 33400
drivers/thermal/k3_bandgap.c line 81
Quoted 1 line
drivers/thermal/k3_bandgap.c new file +1
-0+struct k3_thermal_data ;
forward declaration not needed.
Quoted 4 lines
drivers/thermal/k3_bandgap.c new file +4
-0+struct k3_bandgap { +void __iomem *base; +const struct k3_bandgap_data *conf; +};
drivers/thermal/k3_bandgap.c line 96
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal; +struct k3_bandgap *bgp; +struct work_struct thermal_wq; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +int prev_temp;
prev_temp is assigned but not used.
Quoted 37 lines
drivers/thermal/k3_bandgap.c new file +37
-0+}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. +*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ;
drivers/thermal/k3_bandgap.c line 143
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ];
To be sure there is not a subtle memory corruption, I would recommend to check the consistency between K3_VTM_ADC_END_VAL - K3_VTM_ADC_BEGIN_VAL and the array size at init time.
For example:
if (ARRAY_SIZE(k3_adc_to_temp) !=
(K3_VTM_ADC_END_VAL - K3_VTM_ADC_BEGIN_VAL))
Quoted 68 lines
drivers/thermal/k3_bandgap.c new file +68
-0+return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + + data->prev_temp = *temp; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static void k3_thermal_work (struct work_struct *work) +{ +struct k3_thermal_data *data =container_of (work, + struct k3_thermal_data, thermal_wq); + +thermal_zone_device_update (data->ti_thermal,THERMAL_EVENT_UNSPECIFIED ); + +dev_dbg (&data->ti_thermal->device,"updated thermal zone %s\n" , + data->ti_thermal->type); +} + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc;
drivers/thermal/k3_bandgap.c line 222
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; +INIT_WORK (&data[id].thermal_wq, k3_thermal_work);
What is supposed to do ?
Quoted 65 lines
drivers/thermal/k3_bandgap.c new file +64
-0+ val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + +/* Initialize Previous temp */ +k3_thermal_get_temp (&data[id], &data[id].prev_temp); + } + +platform_set_drvdata (pdev, bgp); + +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + }, +}; + +module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" );
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 33 lines · Daniel Lezcano
Quoted 32 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures and creating work to periodically read temperatures from the zones are supported.
There are no active/passive cooling agent supported.Signed-off-by Keerthy <[email protected]>---
Changes in v4:
* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.drivers/thermal/Kconfig | 11 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 287 +++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+)create mode 100644
drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +0
-0@@ -251,6 +251,17 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed.
Quoted 12 lines
drivers/thermal/Kconfig config IMX_THERMAL · line 263
Quoted 10 lines
drivers/thermal/Kconfig +10
-0+config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality and also trend + computation.trend is now removed :)
Oops missed this one here. I will remove.
Quoted 34 lines
Quoted 34 lines
drivers/thermal/Kconfig +0
-0config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +12
-0@@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h>
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 17
Quoted 5 lines
drivers/thermal/k3_bandgap.c new file +5
-0+#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/workqueue.h> Please check all the headers are needed, AFAICT
workqueue.handspinlock.hare not.
okay
Quoted 66 lines
Quoted 53 lines
drivers/thermal/k3_bandgap.c new file +52
-0+#include <linux/thermal.h> +#include <linux/of.h> + +#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xf +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8 +#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 ,drivers/thermal/k3_bandgap.c line 79
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , + 123400, 123800, 124200, 124600, 124900, 125000, +};Can be this array replaced by an initialization array with a formula?
Quoted 2 lines
Why do we have most of the time a step of 400 then suddenly 500 and 400 again? eg. 30600, 31000, 31400, 31900, 32500, 33000, 33400
This has come from a polynomial equation which i do not want to calculate every time we read the temperature. Hence prefer Look up table.
Quoted 4 lines
drivers/thermal/k3_bandgap.c line 81
Quoted 2 lines
drivers/thermal/k3_bandgap.c new file +1
-0+struct k3_thermal_data ;forward declaration not needed.
okay
Quoted 17 lines
Quoted 5 lines
drivers/thermal/k3_bandgap.c new file +4
-0+struct k3_bandgap { +void __iomem *base; +const struct k3_bandgap_data *conf; +};drivers/thermal/k3_bandgap.c line 96
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal; +struct k3_bandgap *bgp; +struct work_struct thermal_wq; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +int prev_temp;
prev_tempis assigned but not used.
Yes this can be removed.
Quoted 53 lines
Quoted 38 lines
drivers/thermal/k3_bandgap.c new file +37
-0+}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. +*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ;drivers/thermal/k3_bandgap.c line 143
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ];To be sure there is not a subtle memory corruption, I would recommend to check the consistency between
K3_VTM_ADC_END_VAL-K3_VTM_ADC_BEGIN_VALand the array size at init time.
Quoted 4 lines
For example:
if (
ARRAY_SIZE(k3_adc_to_temp)!=(K3_VTM_ADC_END_VAL - K3_VTM_ADC_BEGIN_VAL))
okay
Quoted 73 lines
Quoted 73 lines
drivers/thermal/k3_bandgap.c new file +72
-0+return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + + data->prev_temp = *temp; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static void k3_thermal_work (struct work_struct *work) +{ +struct k3_thermal_data *data =container_of (work, + struct k3_thermal_data, thermal_wq); + +thermal_zone_device_update (data->ti_thermal,THERMAL_EVENT_UNSPECIFIED ); + +dev_dbg (&data->ti_thermal->device,"updated thermal zone %s\n" , + data->ti_thermal->type); +} + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc; + } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) {
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 222
Quoted 6 lines
drivers/thermal/k3_bandgap.c new file +6
-0+ data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; +INIT_WORK (&data[id].thermal_wq, k3_thermal_work);What is supposed to do ?
Periodically poll temperature. I know there is no passive cooling agent like cpufreq at the moment but i do have a critical trip do you recommend to remove that?
Thanks,
Keerthy
Quoted 58 lines
Quoted 58 lines
drivers/thermal/k3_bandgap.c new file +57
-0+ val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + +/* Initialize Previous temp */ +k3_thermal_get_temp (&data[id], &data[id].prev_temp); + } + +platform_set_drvdata (pdev, bgp); + +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + },
Quoted 10 lines
drivers/thermal/k3_bandgap.c line 287
Quoted 8 lines
drivers/thermal/k3_bandgap.c new file +7
-0+}; + +module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" );
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 15 lines · Keerthy
Quoted 12 lines · Daniel Lezcano
Quoted 11 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures and creating work to periodically read temperatures from the zones are supported.
There are no active/passive cooling agent supported.Signed-off-by Keerthy <[email protected]>---
[ ... ]
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
+static const int k3_adc_to_temp[] = {
+ -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600,
[ ... ]
Quoted 11 lines
Quoted 8 lines
Quoted 3 lines
123000,
+ 123400, 123800, 124200, 124600, 124900, 125000, +};Can be this array replaced by an initialization array with a formula?
Why do we have most of the time a step of 400 then suddenly 500 and 400 again? eg. 30600, 31000, 31400, 31900, 32500, 33000, 33400
This has come from a polynomial equation which i do not want to calculate every time we read the temperature. Hence prefer Look up table.
Agree, it makes sense to not calculate every time the temperature is read.
I was suggesting to fill the array at init time with this polynomial formula instead of hardcoding it.
[ ... ]
Quoted 23 lines
Quoted 14 lines
Quoted 14 lines
drivers/thermal/k3_bandgap.c new file +14
-0+ + /* Get the sensor count in the VTM */ + val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET); + cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK; + cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK); + + data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto err_alloc; + } + + /* Register the thermal sensors */ + for (id = 0; id < cnt; id++) {Quoted 8 lines
Quoted 6 lines
+ data[id].sensor_id = id;
+ data[id].bgp = bgp;
+ data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET+ + id *K3_VTM_REGS_PER_TS;
+ data[id].stat_offset = data[id].ctrl_offset +0x8; +INIT_WORK(&data[id].thermal_wq, k3_thermal_work);What is supposed to do ?
Quoted 3 lines
Periodically poll temperature. I know there is no passive cooling agent like cpufreq at the moment but i do have a critical trip do you recommend to remove that?
Actually I was referring to the workq which is initialized, the callback set but it is never called. It can be removed.
Please take also the opportunity to wrap the calls to the register with an explicit helper function name.
And remove reg_cnt which is unused.
Thanks
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 33 lines · Daniel Lezcano
Quoted 15 lines · Keerthy
Quoted 12 lines · Daniel Lezcano
Quoted 11 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures and creating work to periodically read temperatures from the zones are supported.
There are no active/passive cooling agent supported.Signed-off-by Keerthy <[email protected]>---
[ ... ]
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
+static const int k3_adc_to_temp[] = {
+ -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600,[ ... ]
Quoted 9 lines
Quoted 8 lines
Quoted 3 lines
123000,
+ 123400, 123800, 124200, 124600, 124900, 125000, +};Can be this array replaced by an initialization array with a formula?
Why do we have most of the time a step of 400 then suddenly 500 and 400 again? eg. 30600, 31000, 31400, 31900, 32500, 33000, 33400
Quoted 7 lines
Quoted 2 lines
This has come from a polynomial equation which i do not want to calculate every time we read the temperature. Hence prefer Look up table.
Agree, it makes sense to not calculate every time the temperature is read.
I was suggesting to fill the array at init time with this polynomial formula instead of hardcoding it.
As in case of OMAP this is a standard polynomial equation that does not
change so i would prefer not calculating in the driver and having the look up table from TRM.
Quoted 26 lines
[ ... ]
Quoted 23 lines
Quoted 22 lines
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ + /* Get the sensor count in the VTM */ + val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET); + cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK; + cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK); + + data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto err_alloc;drivers/thermal/k3_bandgap.c line 222
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ } + + /* Register the thermal sensors */ + for (id = 0; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + + id * K3_VTM_REGS_PER_TS; + data[id].stat_offset = data[id].ctrl_offset + 0x8; + INIT_WORK(&data[id].thermal_wq, k3_thermal_work);What is supposed to do ?
Quoted 6 lines
Quoted 3 lines
Periodically poll temperature. I know there is no passive cooling agent like cpufreq at the moment but i do have a critical trip do you recommend to remove that?
Actually I was referring to the workq which is initialized, the callback set but it is never called. It can be removed.
Okay got it.
Quoted 3 lines
Please take also the opportunity to wrap the calls to the register with an explicit helper function name.
IIUC the comment asks me to define a separate function that takes care of the body of the for loop.
Quoted 2 lines
And remove
reg_cntwhich is unused.
Sure
Thanks,
Keerthy
Quoted 5 lines
Thanks
-- Daniel
PATCH RESEND v4 3/4 arm64: dts: ti: am654: Add thermal zones
In reply to KeerthyThe am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones
--- .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file +45 -0
@@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +};
Signature · 1 line
2.17.1
PATCH RESEND v4 4/4 arm64: dts: ti: am6: Add VTM node
In reply to KeerthyVTM stands for voltage and thermal management. Add the vtm node and the associated thermal zones on the SoC.
--- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +11 -0
@@ -89,4 +89,15 @@ clocks = <&k3_clks 59 0>; clock-names = "gpio"; }; + + vtm: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x42050000 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; };
Signature · 1 line
2.17.1