ppc4xx: Add GDsys PowerPC 440 ETX board support.
PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.
Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.
---
- Fixup NOR mapping in ft_board_setup()
MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/gdsys/gdppc440etx/Makefile | 51 +++++ board/gdsys/gdppc440etx/config.mk | 44 ++++ board/gdsys/gdppc440etx/gdppc440etx.c | 347 +++++++++++++++++++++++++++++++++ board/gdsys/gdppc440etx/init.S | 75 +++++++ board/gdsys/gdppc440etx/u-boot.lds | 144 ++++++++++++++ include/configs/gdppc440etx.h | 194 ++++++++++++++++++ 9 files changed, 860 insertions(+), 0 deletions(-) create mode 100644 board/gdsys/gdppc440etx/Makefile create mode 100644 board/gdsys/gdppc440etx/config.mk create mode 100644 board/gdsys/gdppc440etx/gdppc440etx.c create mode 100644 board/gdsys/gdppc440etx/init.S create mode 100644 board/gdsys/gdppc440etx/u-boot.lds create mode 100644 include/configs/gdppc440etx.h
MAINTAINERS +1 -0
@@ -132,6 +132,7 @@ Jon Diekema <[email protected]> Dirk Eibach <[email protected]> + gdppc440etx PPC440EP/GR neo PPC405EP Dave Ellis <[email protected]>
MAKEALL +1 -0
@@ -197,6 +197,7 @@ LIST_4xx=" \ EXBITGEN \ fx12mm \ G2000 \ + gdppc440etx \ glacier \ haleakala \ haleakala_nand \
Makefile +3 -0
@@ -1322,6 +1322,9 @@ fx12mm_config: unconfig G2000_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 +gdppc440etx_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys + hcu4_config: unconfig @mkdir -p $(obj)board/netstal/common @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
board/gdsys/gdppc440etx/Makefile new file +51 -0
51 lines not on this page · raw message
board/gdsys/gdppc440etx/config.mk new file +44 -0
44 lines not on this page · raw message
board/gdsys/gdppc440etx/gdppc440etx.c new file +347 -0
347 lines not on this page · raw message
board/gdsys/gdppc440etx/init.S new file +75 -0
75 lines not on this page · raw message
board/gdsys/gdppc440etx/u-boot.lds new file +144 -0
144 lines not on this page · raw message
include/configs/gdppc440etx.h new file +194 -0
194 lines not on this page · raw message
Signature · 1 line
1.5.6.5
PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.
Hi Dirk,
Quoted 7 lines · Dirk Eibach
Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.
Signed-off-by Dirk Eibach <[email protected]>---
- Fixup NOR mapping in
ft_board_setup()
Why is this needed? Doesn't the 4xx-common function handle this correctly?
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
Eibach
PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.
Hi Stefan
Quoted 9 lines
Subject: Re: [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.
Hi Dirk,
Quoted 3 lines · Dirk Eibach
Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.
Quoted 7 lines
Quoted 4 lines
Signed-off-by Dirk Eibach <[email protected]>---
- Fixup NOR mapping in
ft_board_setup()Why is this needed? Doesn't the 4xx-common function handle this correctly?
It is _not_ needed. You are right, 4xx-common handles everything well. It was an error in my dts. And having a quick look into canyonlands implementation brought me on the wrong track. Sorry for the noise.
So can we revert to [PATCH v6] or do I have to post a [PATCH v8]?
Cheers
Dirk
--------------------------------------------------------------------------
Schauen Sie vorbei und erleben Sie unsere Produkte auf der ISE und der CeBIT. Wir freuen uns auf Ihren Besuch.
ISE 2009 in Amsterdam vom 03.02.2009 bis zum 05.02.2009 Halle 10, Stand K135
CeBIT 2009 in Hannover vom 03.03.2009 bis zum 08.03.2009 Halle 12, Stand B25
--------------------------------------------------------------------------
Guntermann & Drunck GmbH Systementwicklung
Dortmunder Str. 4a
D-57234 Wilnsdorf - Germany
Tel: +49 (0) 27 39 / 89 01 - 100 Fax: +49 (0) 27 39 / 89 01 - 120
E-Mail: mailto:sales at gdsys.de Web: www.gdsys.de
--------------------------------------------------------------------------
Geschaeftsfuehrer:
Udo Guntermann - Martin Drunck - Reiner Ruelmann - Klaus Tocke HRB 2884, Amtsgericht Siegen - WEEE-Reg.-Nr. DE30763240 USt.-Id.-Nr. DE 126575222 - Steuer-Nr. 342 / 5835 / 1041
--------------------------------------------------------------------------
PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.
Quoted 8 lines · Dirk
Quoted 4 lines
Quoted 1 line
- Fixup NOR mapping in
ft_board_setup()Why is this needed? Doesn't the 4xx-common function handle this correctly?
It is _not_ needed. You are right, 4xx-common handles everything well. It was an error in my dts. And having a quick look into canyonlands implementation brought me on the wrong track. Sorry for the noise.
OK.
Quoted 1 line
So can we revert to [PATCH v6] or do I have to post a [PATCH v8]?
No, v6 is fine and queued for the next merge window.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================