Skip to contentSkip to conversation

ppc4xx: Add GDsys PowerPC 440 ETX board support.

PATCH New Dirk Eibach 3 participants 4 messages Dec 17, 2008 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.

Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.

---

- Fixup NOR mapping in ft_board_setup()

 MAINTAINERS                           |    1 +
 MAKEALL                               |    1 +
 Makefile                              |    3 +
 board/gdsys/gdppc440etx/Makefile      |   51 +++++
 board/gdsys/gdppc440etx/config.mk     |   44 ++++
 board/gdsys/gdppc440etx/gdppc440etx.c |  347 +++++++++++++++++++++++++++++++++
 board/gdsys/gdppc440etx/init.S        |   75 +++++++
 board/gdsys/gdppc440etx/u-boot.lds    |  144 ++++++++++++++
 include/configs/gdppc440etx.h         |  194 ++++++++++++++++++
 9 files changed, 860 insertions(+), 0 deletions(-)
 create mode 100644 board/gdsys/gdppc440etx/Makefile
 create mode 100644 board/gdsys/gdppc440etx/config.mk
 create mode 100644 board/gdsys/gdppc440etx/gdppc440etx.c
 create mode 100644 board/gdsys/gdppc440etx/init.S
 create mode 100644 board/gdsys/gdppc440etx/u-boot.lds
 create mode 100644 include/configs/gdppc440etx.h
MAINTAINERS +1 -0
index f048795..91dfc73 100644
@@ -132,6 +132,7 @@ Jon Diekema <[email protected]>
 
 Dirk Eibach <[email protected]>
 
+	gdppc440etx	PPC440EP/GR
 	neo		PPC405EP
 
 Dave Ellis <[email protected]>
MAKEALL +1 -0
index cc49a98..8531f65 100755
@@ -197,6 +197,7 @@ LIST_4xx="		\
 	EXBITGEN	\
 	fx12mm		\
 	G2000		\
+	gdppc440etx	\
 	glacier		\
 	haleakala	\
 	haleakala_nand	\
Makefile +3 -0
index d6cd91a..1d72162 100644
@@ -1322,6 +1322,9 @@ fx12mm_config: unconfig
 G2000_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
 
+gdppc440etx_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
+
 hcu4_config:	unconfig
 	@mkdir -p $(obj)board/netstal/common
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
board/gdsys/gdppc440etx/Makefile new file +51 -0

51 lines not on this page · raw message

board/gdsys/gdppc440etx/config.mk new file +44 -0

44 lines not on this page · raw message

board/gdsys/gdppc440etx/gdppc440etx.c new file +347 -0

347 lines not on this page · raw message

board/gdsys/gdppc440etx/init.S new file +75 -0

75 lines not on this page · raw message

board/gdsys/gdppc440etx/u-boot.lds new file +144 -0

144 lines not on this page · raw message

include/configs/gdppc440etx.h new file +194 -0

194 lines not on this page · raw message

Signature · 1 line
1.5.6.5
#1 lore raw

PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.

Hi Dirk,

Quoted 7 lines · Dirk Eibach

Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.

---

- Fixup NOR mapping in ft_board_setup()

Why is this needed? Doesn't the 4xx-common function handle this correctly?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================

#2 lore raw

PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.

Hi Stefan

Quoted 9 lines

Subject: Re: [U-Boot] [PATCH v7] ppc4xx: Add GDsys PowerPC 440 ETX board support.

Hi Dirk,

Quoted 3 lines · Dirk Eibach

Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.

Quoted 7 lines
Quoted 4 lines

---

- Fixup NOR mapping in ft_board_setup()

Why is this needed? Doesn't the 4xx-common function handle this correctly?

It is _not_ needed. You are right, 4xx-common handles everything well. It was an error in my dts. And having a quick look into canyonlands implementation brought me on the wrong track. Sorry for the noise.

So can we revert to [PATCH v6] or do I have to post a [PATCH v8]?

Cheers
Dirk
--------------------------------------------------------------------------
Schauen Sie vorbei und erleben Sie unsere Produkte auf der ISE und der CeBIT. Wir freuen uns auf Ihren Besuch.

ISE 2009 in Amsterdam vom 03.02.2009 bis zum 05.02.2009 Halle 10, Stand K135

CeBIT 2009 in Hannover vom 03.03.2009 bis zum 08.03.2009 Halle 12, Stand B25

--------------------------------------------------------------------------
Guntermann & Drunck GmbH Systementwicklung
Dortmunder Str. 4a
D-57234 Wilnsdorf - Germany
Tel: +49 (0) 27 39 / 89 01 - 100 Fax: +49 (0) 27 39 / 89 01 - 120
E-Mail: mailto:sales at gdsys.de Web: www.gdsys.de
--------------------------------------------------------------------------
Geschaeftsfuehrer:
Udo Guntermann - Martin Drunck - Reiner Ruelmann - Klaus Tocke HRB 2884, Amtsgericht Siegen - WEEE-Reg.-Nr. DE30763240 USt.-Id.-Nr. DE 126575222 - Steuer-Nr. 342 / 5835 / 1041
--------------------------------------------------------------------------

#3 lore raw

PATCH v7 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.

Quoted 8 lines · Dirk
Quoted 4 lines
Quoted 1 line

- Fixup NOR mapping in ft_board_setup()

Why is this needed? Doesn't the 4xx-common function handle this correctly?

It is _not_ needed. You are right, 4xx-common handles everything well. It was an error in my dts. And having a quick look into canyonlands implementation brought me on the wrong track. Sorry for the noise.

OK.

Quoted 1 line

So can we revert to [PATCH v6] or do I have to post a [PATCH v8]?

No, v6 is fine and queued for the next merge window.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================