ASoC: tlv320aic3x: Add virtual output pin Detection
Subsystems (3)
PATCH 1/1 ASoC: tlv320aic3x: Add virtual output pin Detection
Purpose of this virtual Detection pin is to keep codec bias on whenever the GPIO or jack detection features are needed.
Jack detection needs a mic bias so machine drivers can construct a following route for instance for keeping the path and codec bias on:
"Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec.
For the GPIO the machine driver can force the pin on with snd_soc_dapm_force_enable_pin.
---
PLL is activated when in SND_SOC_BIAS_PREPARE or _ON so it could be running but I have a vague impression that it's active only when ADC or DAC is on. I don't have at the moment possibility to measure it and don't want to move it to DAPM either before doing some oscilloscope and pop & clicks measurements. Current consumption anyway doesn't differ between standby and on when there is no active stream and other widgets are off.
--- sound/soc/codecs/tlv320aic3x.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
sound/soc/codecs/tlv320aic3x.c +8 -0
@@ -605,6 +605,14 @@ static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {SND_SOC_DAPM_INPUT ("LINE1R" ),SND_SOC_DAPM_INPUT ("LINE2L" ),SND_SOC_DAPM_INPUT ("LINE2R" ), + +/* +* Virtual output pin to detection block inside codec. This can be +* used to keep codec bias on if gpio or detection features are needed. +* Force pin on or construct a path with an input jack and mic bias +* widgets. +*/ + SND_SOC_DAPM_OUTPUT("Detection"), }; static const struct snd_soc_dapm_widget aic3007_dapm_widgets[] = {
Signature · 1 line
1.7.1
Quoted 6 lines · Jarkko Nikula
Purpose of this virtual Detection pin is to keep codec bias on whenever the GPIO or jack detection features are needed.
Jack detection needs a mic bias so machine drivers can construct a following route for instance for keeping the path and codec bias on:
Quoted 6 lines
"Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec.
For the GPIO the machine driver can force the pin on with
snd_soc_dapm_force_enable_pin.Signed-off-by Jarkko Nikula <[email protected]>
Liam Girdwood
AppliedQuoted 7 lines · Mark Brown
Quoted 5 lines · Jarkko Nikula
Purpose of this virtual Detection pin is to keep codec bias on whenever the GPIO or jack detection features are needed.
Jack detection needs a mic bias so machine drivers can construct a following route for instance for keeping the path and codec bias on:
Quoted 8 lines
Quoted 6 lines
"Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec.
For the GPIO the machine driver can force the pin on with
snd_soc_dapm_force_enable_pin.Signed-off-by Jarkko Nikula <[email protected]>Acked-by Mark Brown <[email protected]>
Applied.
Thanks
Liam
Signature · 3 lines
Freelance Developer, SlimLogic Ltd ASoC and Voltage Regulator Maintainer. http://www.slimlogic.co.uk