Skip to contentSkip to conversation

Add support for the IGEP v2 board.

PATCH New Enric Balletbo i Serra 3 participants 8 messages Oct 11, 2010 – Oct 14, 2010

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v4 cover Add support for the IGEP v2 board.

Hello,

This is the version 4 of patch series to add initial support for OMAP3 IGEP v2 board.

CHANGES:

* since v3
- [x/3] add Acked-by and Tested-by lines
- [3/3] fix warning in the build:

        igep0020.c: In function 'board_eth_init':
        igep0020.c:125: warning: implicit declaration of function
        'smc911x_initialize'

* since v2
- [1/3] keep lists sorted
- [2/3] fix multiline comment style
- [3/3] add entry to MAINTAINERS

* since v1
- [2/3] fix parens in NUMONYX_V_ACTIMB_165 define
- [3/3] add extra space after first &ctrl_base in file igep0020.c
- [3/3] add a space after the 57600 comma in file igep0020.h
- [3/3] remove CONFIG_SYS_ARM_WITHOUT_RELOC undef

$ git diff --stat origin/master
 MAINTAINERS                           |    4 +
 MAKEALL                               |    1 +
 arch/arm/include/asm/arch-omap3/mem.h |   43 ++++++
 board/isee/igep0020/Makefile          |   49 +++++++
 board/isee/igep0020/config.mk         |   33 +++++
 board/isee/igep0020/igep0020.c        |  129 +++++++++++++++++++
 board/isee/igep0020/igep0020.h        |  156 ++++++++++++++++++++++
 boards.cfg                            |    1 +
 drivers/mtd/onenand/onenand_base.c    |    1 +
 include/configs/igep0020.h            |  228 +++++++++++++++++++++++++++++++++
 include/linux/mtd/onenand.h           |    1 +
 11 files changed, 646 insertions(+), 0 deletions(-)
#1 lore raw

PATCH v4 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx

This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.

---
 drivers/mtd/onenand/onenand_base.c |    1 +
 include/linux/mtd/onenand.h        |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)
drivers/mtd/onenand/onenand_base.c +1 -0
index f9273ab..24e02c2 100644
@@ -2213,6 +2213,7 @@ char *onenand_print_device_info(int device, int version)
 }
 
 static const struct onenand_manufacturers onenand_manuf_ids[] = {
+	{ONENAND_MFR_NUMONYX, "Numonyx"},
 	{ONENAND_MFR_SAMSUNG, "Samsung"},
 };
 
include/linux/mtd/onenand.h +1 -0
index 68e174e..5465562 100644
@@ -154,6 +154,7 @@ struct onenand_chip {
 /*
  * OneNAND Flash Manufacturer ID Codes
  */
+#define ONENAND_MFR_NUMONYX	0x20
 #define ONENAND_MFR_SAMSUNG	0xec
 
 /**
Signature · 1 line
1.7.1
#2 lore raw

PATCH v4 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx

Quoted 11 lines · Enric Balletbo i Serra

This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.

---
 drivers/mtd/onenand/onenand_base.c |    1 +
 include/linux/mtd/onenand.h        |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

Applied to u-boot-nand-flash.

-Scott

#3 lore raw

PATCH v4 2/3 OMAP3: SDRC: Introduce Numonyx DDR type

In reply to Enric Balletbo i Serra

Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.

---
 arch/arm/include/asm/arch-omap3/mem.h |   43 +++++++++++++++++++++++++++++++++
 1 files changed, 43 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-omap3/mem.h +43 -0
index a78cf9f..f165949 100644
@@ -128,6 +128,45 @@ enum {
 		(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) |	\
 		(MICRON_TWTR_165 << 16))
 
+/*
+ * NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
+ *   ACTIMA
+ *      TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6
+ *      TDPL (Twr) = 15/6 = 2.5 -> 3
+ *      TRRD = 12/6 = 2
+ *      TRCD = 22.5/6 = 3.75 -> 4
+ *      TRP  = 18/6 = 3
+ *      TRAS = 42/6 = 7
+ *      TRC  = 60/6 = 10
+ *      TRFC = 140/6 = 23.3 -> 24
+ *   ACTIMB
+ *	TWTR = 2
+ *	TCKE = 2
+ *	TXSR = 200/6 =  33.3 -> 34
+ *	TXP  = 1.0 + 1.1 = 2.1 -> 3
+ */
+#define NUMONYX_TDAL_165   6
+#define NUMONYX_TDPL_165   3
+#define NUMONYX_TRRD_165   2
+#define NUMONYX_TRCD_165   4
+#define NUMONYX_TRP_165    3
+#define NUMONYX_TRAS_165   7
+#define NUMONYX_TRC_165   10
+#define NUMONYX_TRFC_165  24
+#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \
+		(NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \
+		(NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \
+		(NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \
+		(NUMONYX_TDAL_165))
+
+#define NUMONYX_TWTR_165   2
+#define NUMONYX_TCKE_165   2
+#define NUMONYX_TXP_165    3
+#define NUMONYX_XSR_165    34
+#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \
+		(NUMONYX_XSR_165 << 0) | (NUMONYX_TXP_165 << 8) | \
+		(NUMONYX_TWTR_165 << 16))
+
 #ifdef CONFIG_OMAP3_INFINEON_DDR
 #define V_ACTIMA_165 INFINEON_V_ACTIMA_165
 #define V_ACTIMB_165 INFINEON_V_ACTIMB_165
@@ -136,6 +175,10 @@ enum {
 #define V_ACTIMA_165 MICRON_V_ACTIMA_165
 #define V_ACTIMB_165 MICRON_V_ACTIMB_165
 #endif
+#ifdef CONFIG_OMAP3_NUMONYX_DDR
+#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
+#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
+#endif
 
 #if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165)
 #error "Please choose the right DDR type in config header"
Signature · 1 line
1.7.1
#4 lore raw

PATCH v4 3/3 OMAP3: Add support for the IGEP v2 board.

In reply to Enric Balletbo i Serra

The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.

---
 MAINTAINERS                    |    4 +
 MAKEALL                        |    1 +
 board/isee/igep0020/Makefile   |   49 +++++++++
 board/isee/igep0020/config.mk  |   33 ++++++
 board/isee/igep0020/igep0020.c |  129 ++++++++++++++++++++++
 board/isee/igep0020/igep0020.h |  156 +++++++++++++++++++++++++++
 boards.cfg                     |    1 +
 include/configs/igep0020.h     |  228 ++++++++++++++++++++++++++++++++++++++++
 8 files changed, 601 insertions(+), 0 deletions(-)
 create mode 100644 board/isee/igep0020/Makefile
 create mode 100644 board/isee/igep0020/config.mk
 create mode 100644 board/isee/igep0020/igep0020.c
 create mode 100644 board/isee/igep0020/igep0020.h
 create mode 100644 include/configs/igep0020.h
MAINTAINERS +4 -0
index e003226..99728ae 100644
@@ -818,6 +818,10 @@ Alex Z
 	lart		SA1100
 	dnp1110		SA1110
 
+Enric Balletbo i Serra <[email protected]>
+
+	igep0020	ARM ARMV7 (OMAP3xx SoC)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
MAKEALL +1 -0
index 1b506d6..78dce8b 100755
@@ -490,6 +490,7 @@ LIST_ARM11="			\
 LIST_ARMV7="		\
 	am3517_evm		\
 	devkit8000		\
+	igep0020		\
 	mx51evk			\
 	omap3_beagle		\
 	omap3_overo		\
board/isee/igep0020/Makefile new file +49 -0

49 lines not on this page · raw message

board/isee/igep0020/config.mk new file +33 -0
new file mode 100644
index 0000000..b8812f9
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2009
+# ISEE 2007 SL, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80008000
board/isee/igep0020/igep0020.c new file +129 -0

129 lines not on this page · raw message

board/isee/igep0020/igep0020.h new file +156 -0

156 lines not on this page · raw message

boards.cfg +1 -0
index 202de1a..6f8db44 100644
@@ -262,6 +262,7 @@ omap4_panda	arm	armv7		panda		ti		omap4
 omap4_sdp4430	arm	armv7		sdp4430		ti		omap4
 am3517_evm	arm	armv7		am3517evm	logicpd		omap3
 devkit8000	arm	armv7		devkit8000	timll		omap3
+igep0020	arm	armv7		igep0020	isee		omap3
 s5p_goni	arm	armv7		goni		samsung		s5pc1xx
 smdkc100	arm	armv7		smdkc100	samsung		s5pc1xx
 ixdpg425	arm	ixp
include/configs/igep0020.h new file +228 -0

228 lines not on this page · raw message

Signature · 1 line
1.7.1
#5 lore raw

PATCH v4 3/3 OMAP3: Add support for the IGEP v2 board.

Sorry, this is the version 4

2010/10/11 Enric Balletbo i Serra <[email protected]>:

Quoted 692 lines

The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.

---

?MAINTAINERS ? ? ? ? ? ? ? ? ? ?| ? ?4 +
?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 +
?board/isee/igep0020/Makefile ? | ? 49 +++++++++
?board/isee/igep0020/config.mk ?| ? 33 ++++++
?board/isee/igep0020/igep0020.c | ?129 ++++++++++++++++++++++
?board/isee/igep0020/igep0020.h | ?156 +++++++++++++++++++++++++++
?boards.cfg ? ? ? ? ? ? ? ? ? ? | ? ?1 +
?include/configs/igep0020.h ? ? | ?228 ++++++++++++++++++++++++++++++++++++++++

?8 files changed, 601 insertions(+), 0 deletions(-) ?create mode 100644 board/isee/igep0020/Makefile ?create mode 100644 board/isee/igep0020/config.mk ?create mode 100644 board/isee/igep0020/igep0020.c ?create mode 100644 board/isee/igep0020/igep0020.h ?create mode 100644 include/configs/igep0020.h

MAINTAINERS +0 -0
index e003226..99728ae 100644
@@ -818,6 +818,10 @@ Alex Z

? ? ? ?lart ? ? ? ? ? ?SA1100
? ? ? ?dnp1110 ? ? ? ? SA1110

MAINTAINERS +4 -0
+Enric Balletbo i Serra <[email protected]>
+
+ ? ? ? igep0020 ? ? ? ?ARM ARMV7 (OMAP3xx SoC)
+

?-------------------------------------------------------------------------

?Unknown / orphaned boards:

MAKEALL +1 -0
index 1b506d6..78dce8b 100755
@@ -490,6 +490,7 @@ LIST_ARM11=" ? ? ? ? ? ? ? ? ? ? ? ?\
 ?LIST_ARMV7=" ? ? ? ? ? \
 ? ? ? ?am3517_evm ? ? ? ? ? ? ?\
 ? ? ? ?devkit8000 ? ? ? ? ? ? ?\
+ ? ? ? igep0020 ? ? ? ? ? ? ? ?\
 ? ? ? ?mx51evk ? ? ? ? ? ? ? ? \
 ? ? ? ?omap3_beagle ? ? ? ? ? ?\
 ? ? ? ?omap3_overo ? ? ? ? ? ? \
board/isee/igep0020/Makefile new file +49 -0
new file mode 100644
index 0000000..2f11879
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB ? ?= $(obj)lib$(BOARD).a
+
+COBJS ?:= igep0020.o
+
+SRCS ? := $(COBJS:.o=.c)
+OBJS ? := $(addprefix $(obj),$(COBJS))
+
+$(LIB): ? ? ? ?$(obj).depend $(OBJS)
+ ? ? ? $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ ? ? ? rm -f $(OBJS)
+
+distclean: ? ? clean
+ ? ? ? rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/isee/igep0020/config.mk new file +33 -0
new file mode 100644
index 0000000..b8812f9
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2009
+# ISEE 2007 SL, <www.iseebcn.com>
+#
+# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80008000
board/isee/igep0020/igep0020.c new file +129 -0
new file mode 100644
index 0000000..3f7eda1
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <netdev.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "igep0020.h"
+
+/* GPMC definitions for LAN9221 chips */
+static const u32 gpmc_lan_config[] = {
+ ? ?NET_LAN9221_GPMC_CONFIG1,
+ ? ?NET_LAN9221_GPMC_CONFIG2,
+ ? ?NET_LAN9221_GPMC_CONFIG3,
+ ? ?NET_LAN9221_GPMC_CONFIG4,
+ ? ?NET_LAN9221_GPMC_CONFIG5,
+ ? ?NET_LAN9221_GPMC_CONFIG6,
+};
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ ? ? ? DECLARE_GLOBAL_DATA_PTR;
+
+ ? ? ? gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ ? ? ? /* board id for Linux */
+ ? ? ? gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;
+ ? ? ? /* boot param addr */
+ ? ? ? gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ ? ? ? return 0;
+}
+
+/*
+ * Routine: setup_net_chip
+ * Description: Setting up the configuration GPMC registers specific to the
+ * ? ? ? ? ? ? Ethernet hardware.
+ */
+#if defined(CONFIG_CMD_NET)
+static void setup_net_chip(void)
+{
+ ? ? ? struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ ? ? ? enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
+ ? ? ? ? ? ? ? ? ? ? ? GPMC_SIZE_16M);
+
+ ? ? ? /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ ? ? ? writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+ ? ? ? /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ ? ? ? writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+ ? ? ? /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ ? ? ? writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ ? ? ? ? ? ? ? &ctrl_base->gpmc_nadv_ale);
+
+ ? ? ? /* Make GPIO 64 as output pin and send a magic pulse through it */
+ ? ? ? if (!omap_request_gpio(64)) {
+ ? ? ? ? ? ? ? omap_set_gpio_direction(64, 0);
+ ? ? ? ? ? ? ? omap_set_gpio_dataout(64, 1);
+ ? ? ? ? ? ? ? udelay(1);
+ ? ? ? ? ? ? ? omap_set_gpio_dataout(64, 0);
+ ? ? ? ? ? ? ? udelay(1);
+ ? ? ? ? ? ? ? omap_set_gpio_dataout(64, 1);
+ ? ? ? }
+}
+#endif
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+ ? ? ? twl4030_power_init();
+
+#if defined(CONFIG_CMD_NET)
+ ? ? ? setup_net_chip();
+#endif
+
+ ? ? ? dieid_num_r();
+
+ ? ? ? return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * ? ? ? ? ? ? hardware. Many pins need to be moved from protect to primary
+ * ? ? ? ? ? ? mode.
+ */
+void set_muxconf_regs(void)
+{
+ ? ? ? MUX_DEFAULT();
+}
+
+int board_eth_init(bd_t *bis)
+{
+ ? ? ? int rc = 0;
+#ifdef CONFIG_SMC911X
+ ? ? ? rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ ? ? ? return rc;
+}
board/isee/igep0020/igep0020.h new file +156 -0
new file mode 100644
index 0000000..c08d758
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _IGEP0020_H_
+#define _IGEP0020_H_
+
+const omap3_sysinfo sysinfo = {
+ ? ? ? DDR_STACKED,
+ ? ? ? "IGEP v2 board",
+ ? ? ? "ONENAND",
+};
+
+/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000
+#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00080701
+#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201
+#define NET_LAN9221_GPMC_CONFIG4 ? ?0x08030703
+#define NET_LAN9221_GPMC_CONFIG5 ? ?0x00060908
+#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000
+#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c
+
+static void setup_net_chip(void);
+
+/*
+ * IEN ?- Input Enable
+ * IDIS - Input Disable
+ * PTD ?- Pull type Down
+ * PTU ?- Pull type Up
+ * DIS ?- Pull type selection is inactive
+ * EN ? - Pull type selection is active
+ * M0 ? - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_DEFAULT()\
+ ? ? ? MUX_VAL(CP(SDRC_D0), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D0 */\
+ ? ? ? MUX_VAL(CP(SDRC_D1), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D1 */\
+ ? ? ? MUX_VAL(CP(SDRC_D2), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D2 */\
+ ? ? ? MUX_VAL(CP(SDRC_D3), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D3 */\
+ ? ? ? MUX_VAL(CP(SDRC_D4), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D4 */\
+ ? ? ? MUX_VAL(CP(SDRC_D5), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D5 */\
+ ? ? ? MUX_VAL(CP(SDRC_D6), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D6 */\
+ ? ? ? MUX_VAL(CP(SDRC_D7), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D7 */\
+ ? ? ? MUX_VAL(CP(SDRC_D8), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D8 */\
+ ? ? ? MUX_VAL(CP(SDRC_D9), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D9 */\
+ ? ? ? MUX_VAL(CP(SDRC_D10), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D10 */\
+ ? ? ? MUX_VAL(CP(SDRC_D11), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D11 */\
+ ? ? ? MUX_VAL(CP(SDRC_D12), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D12 */\
+ ? ? ? MUX_VAL(CP(SDRC_D13), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D13 */\
+ ? ? ? MUX_VAL(CP(SDRC_D14), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D14 */\
+ ? ? ? MUX_VAL(CP(SDRC_D15), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D15 */\
+ ? ? ? MUX_VAL(CP(SDRC_D16), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D16 */\
+ ? ? ? MUX_VAL(CP(SDRC_D17), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D17 */\
+ ? ? ? MUX_VAL(CP(SDRC_D18), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D18 */\
+ ? ? ? MUX_VAL(CP(SDRC_D19), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D19 */\
+ ? ? ? MUX_VAL(CP(SDRC_D20), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D20 */\
+ ? ? ? MUX_VAL(CP(SDRC_D21), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D21 */\
+ ? ? ? MUX_VAL(CP(SDRC_D22), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D22 */\
+ ? ? ? MUX_VAL(CP(SDRC_D23), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D23 */\
+ ? ? ? MUX_VAL(CP(SDRC_D24), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D24 */\
+ ? ? ? MUX_VAL(CP(SDRC_D25), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D25 */\
+ ? ? ? MUX_VAL(CP(SDRC_D26), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D26 */\
+ ? ? ? MUX_VAL(CP(SDRC_D27), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D27 */\
+ ? ? ? MUX_VAL(CP(SDRC_D28), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D28 */\
+ ? ? ? MUX_VAL(CP(SDRC_D29), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D29 */\
+ ? ? ? MUX_VAL(CP(SDRC_D30), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D30 */\
+ ? ? ? MUX_VAL(CP(SDRC_D31), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D31 */\
+ ? ? ? MUX_VAL(CP(SDRC_CLK), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_CLK */\
+ ? ? ? MUX_VAL(CP(SDRC_DQS0), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS0 */\
+ ? ? ? MUX_VAL(CP(SDRC_DQS1), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS1 */\
+ ? ? ? MUX_VAL(CP(SDRC_DQS2), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS2 */\
+ ? ? ? MUX_VAL(CP(SDRC_DQS3), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS3 */\
+ ? ? ? MUX_VAL(CP(GPMC_A1), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A1 */\
+ ? ? ? MUX_VAL(CP(GPMC_A2), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A2 */\
+ ? ? ? MUX_VAL(CP(GPMC_A3), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A3 */\
+ ? ? ? MUX_VAL(CP(GPMC_A4), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A4 */\
+ ? ? ? MUX_VAL(CP(GPMC_A5), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A5 */\
+ ? ? ? MUX_VAL(CP(GPMC_A6), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A6 */\
+ ? ? ? MUX_VAL(CP(GPMC_A7), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A7 */\
+ ? ? ? MUX_VAL(CP(GPMC_A8), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A8 */\
+ ? ? ? MUX_VAL(CP(GPMC_A9), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A9 */\
+ ? ? ? MUX_VAL(CP(GPMC_A10), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\
+ ? ? ? MUX_VAL(CP(GPMC_D0), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D0 */\
+ ? ? ? MUX_VAL(CP(GPMC_D1), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D1 */\
+ ? ? ? MUX_VAL(CP(GPMC_D2), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D2 */\
+ ? ? ? MUX_VAL(CP(GPMC_D3), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D3 */\
+ ? ? ? MUX_VAL(CP(GPMC_D4), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D4 */\
+ ? ? ? MUX_VAL(CP(GPMC_D5), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D5 */\
+ ? ? ? MUX_VAL(CP(GPMC_D6), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D6 */\
+ ? ? ? MUX_VAL(CP(GPMC_D7), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D7 */\
+ ? ? ? MUX_VAL(CP(GPMC_D8), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D8 */\
+ ? ? ? MUX_VAL(CP(GPMC_D9), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D9 */\
+ ? ? ? MUX_VAL(CP(GPMC_D10), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D10 */\
+ ? ? ? MUX_VAL(CP(GPMC_D11), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D11 */\
+ ? ? ? MUX_VAL(CP(GPMC_D12), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D12 */\
+ ? ? ? MUX_VAL(CP(GPMC_D13), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D13 */\
+ ? ? ? MUX_VAL(CP(GPMC_D14), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D14 */\
+ ? ? ? MUX_VAL(CP(GPMC_D15), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D15 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS0), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS0 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS1), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS1 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS2), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPIO_nCS2 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS3), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPIO_nCS3 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS4), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS4 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS5), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS5 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS6), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS6 */\
+ ? ? ? MUX_VAL(CP(GPMC_NCS7), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS7 */\
+ ? ? ? MUX_VAL(CP(GPMC_CLK), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\
+ ? ? ? MUX_VAL(CP(GPMC_NADV_ALE), ?(IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\
+ ? ? ? MUX_VAL(CP(GPMC_NOE), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\
+ ? ? ? MUX_VAL(CP(GPMC_NWE), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\
+ ? ? ? MUX_VAL(CP(GPMC_NBE0_CLE), ?(IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\
+ ? ? ? MUX_VAL(CP(GPMC_NBE1), ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_nBE1 */\
+ ? ? ? MUX_VAL(CP(GPMC_NWP), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_nWP */\
+ ? ? ? MUX_VAL(CP(GPMC_WAIT0), ? ? (IEN ?| PTU | EN ?| M0)) /* GPMC_WAIT0 */\
+ ? ? ? MUX_VAL(CP(GPMC_WAIT2), ? ? (IEN ?| PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\
+ ? ? ? MUX_VAL(CP(MMC1_CLK), ? ? ? (IDIS | PTU | EN ?| M0)) /* MMC1_CLK */\
+ ? ? ? MUX_VAL(CP(MMC1_CMD), ? ? ? (IEN ?| PTU | EN ?| M0)) /* MMC1_CMD */\
+ ? ? ? MUX_VAL(CP(MMC1_DAT0), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT0 */\
+ ? ? ? MUX_VAL(CP(MMC1_DAT1), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT1 */\
+ ? ? ? MUX_VAL(CP(MMC1_DAT2), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT2 */\
+ ? ? ? MUX_VAL(CP(MMC1_DAT3), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT3 */\
+ ? ? ? MUX_VAL(CP(UART3_TX_IRTX), ?(IDIS | PTD | DIS | M0)) /* UART3_TX */\
+ ? ? ? MUX_VAL(CP(UART3_RX_IRRX), ?(IEN ?| PTD | DIS | M0)) /* UART3_RX */\
+ ? ? ? MUX_VAL(CP(I2C1_SCL), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C1_SCL */\
+ ? ? ? MUX_VAL(CP(I2C1_SDA), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C1_SDA */\
+ ? ? ? MUX_VAL(CP(I2C4_SCL), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C4_SCL */\
+ ? ? ? MUX_VAL(CP(I2C4_SDA), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C4_SDA */\
+ ? ? ? MUX_VAL(CP(SYS_32K), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SYS_32K */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT0), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_2 */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT1), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_3 */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT2), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_4 */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT3), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_5 */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT4), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_6 */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT5), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_7 */\
+ ? ? ? MUX_VAL(CP(SYS_BOOT6), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_8 */\
+ ? ? ? MUX_VAL(CP(SDRC_CKE0), ? ? ?(IDIS | PTU | EN ?| M0)) /* SDRC_CKE0 */\
+ ? ? ? MUX_VAL(CP(SDRC_CKE1), ? ? ?(IDIS | PTU | EN ?| M0)) /* SDRC_CKE1 */
+#endif
boards.cfg +0 -0
index 202de1a..6f8db44 100644
@@ -262,6 +262,7 @@ omap4_panda arm ? ? armv7 ? ? ? ? ? panda ? ? ? ? ? ti ? ? ? ? ? ? ?omap4

?omap4_sdp4430 ?arm ? ? armv7 ? ? ? ? ? sdp4430 ? ? ? ? ti ? ? ? ? ? ? ?omap4 ?am3517_evm ? ? arm ? ? armv7 ? ? ? ? ? am3517evm ? ? ? logicpd ? ? ? ? omap3 ?devkit8000 ? ? arm ? ? armv7 ? ? ? ? ? devkit8000 ? ? ?timll ? ? ? ? ? omap3 +igep0020 ? ? ? arm ? ? armv7 ? ? ? ? ? igep0020 ? ? ? ?isee ? ? ? ? ? ?omap3 ?s5p_goni ? ? ? arm ? ? armv7 ? ? ? ? ? goni ? ? ? ? ? ?samsung ? ? ? ? s5pc1xx ?smdkc100 ? ? ? arm ? ? armv7 ? ? ? ? ? smdkc100 ? ? ? ?samsung ? ? ? ? s5pc1xx ?ixdpg425 ? ? ? arm ? ? ixp

include/configs/igep0020.h new file +228 -1
new file mode 100644
index 0000000..34e8a57
@@ -0,0 +1,228 @@
+/*
+ * (C) Copyright 2010
+ * ISEE 2007 SL, <www.iseebcn.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ? ? ? ? See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7 ? ? ? ? ? 1 ? ? ? /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP ? ? ? ? ? ?1 ? ? ? /* in a TI OMAP core */
+#define CONFIG_OMAP34XX ? ? ? ? ? ? ? ?1 ? ? ? /* which is a 34XX */
+#define CONFIG_OMAP3430 ? ? ? ? ? ? ? ?1 ? ? ? /* which is in a 3430 */
+#define CONFIG_OMAP3_IGEP0020 ?1 ? ? ? /* working with IGEP0020 */
+
+#define CONFIG_SDRC ? ?/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO ? ? ? ? 1
+#define CONFIG_DISPLAY_BOARDINFO ? ? ? 1
+
+/* Clock Defines */
+#define V_OSCK ? ? ? ? ? ? ? ? 26000000 ? ? ? ?/* Clock output from T2 */
+#define V_SCLK ? ? ? ? ? ? ? ? (V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG ? ? ? ? ? ? 1 ? ? ? /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS ? ? ? 1
+#define CONFIG_INITRD_TAG ? ? ? ? ? ? ?1
+#define CONFIG_REVISION_TAG ? ? ? ? ? ?1
+
+/*
+ * NS16550 Configuration
+ */
+
+#define V_NS16550_CLK ? ? ? ? ? ? ? ? ?48000000 ? ? ? ?/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE ? ?(-4)
+#define CONFIG_SYS_NS16550_CLK ? ? ? ? V_NS16550_CLK
+
+/* select serial console configuration */
+#define CONFIG_CONS_INDEX ? ? ? ? ? ? ?3
+#define CONFIG_SYS_NS16550_COM3 ? ? ? ? ? ? ? ?OMAP34XX_UART3
+#define CONFIG_SERIAL3 ? ? ? ? ? ? ? ? 3
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE ? ? ? ? ? ? ? ? ? ? ? ?115200
+#define CONFIG_SYS_BAUDRATE_TABLE ? ? ?{4800, 9600, 19200, 38400, 57600, 115200}
+#define CONFIG_MMC ? ? ? ? ? ? ? ? ? ? 1
+#define CONFIG_OMAP3_MMC ? ? ? ? ? ? ? 1
+#define CONFIG_DOS_PARTITION ? ? ? ? ? 1
+
+/* DDR ?*/
+#define CONFIG_OMAP3_NUMONYX_DDR ? ? ? 1
+
+/* USB */
+#define CONFIG_MUSB_UDC ? ? ? ? ? ? ? ? ? ? ? ?1
+#define CONFIG_USB_OMAP3 ? ? ? ? ? ? ? 1
+#define CONFIG_TWL4030_USB ? ? ? ? ? ? 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE ? ? ? ? ? ? ?1
+#define CONFIG_USB_TTY ? ? ? ? ? ? ? ? 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV ? 1
+
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID ? ? ? ? ? 0x0451
+#define CONFIG_USBD_PRODUCTID ? ? ? ? ?0x5678
+#define CONFIG_USBD_MANUFACTURER ? ? ? "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME ? ? ? "IGEP"
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 ? ? ? ? ? ? ? ?/* EXT2 Support ? ? ? ? ? ? ? ? */
+#define CONFIG_CMD_FAT ? ? ? ? /* FAT support ? ? ? ? ? ? ? ? ?*/
+#define CONFIG_CMD_I2C ? ? ? ? /* I2C serial bus support ? ? ? */
+#define CONFIG_CMD_MMC ? ? ? ? /* MMC support ? ? ? ? ? ? ? ? ?*/
+#define CONFIG_CMD_ONENAND ? ? /* ONENAND support ? ? ? ? ? ? ?*/
+#define CONFIG_CMD_NET ? ? ? ? /* bootp, tftpboot, rarpboot ? ?*/
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS ? ? ? ? /* NFS support ? ? ? ? ? ? ? ? ?*/
+#define CONFIG_CMD_MTDPARTS ? ?/* Enable MTD parts commands ? ?*/
+#define CONFIG_MTD_DEVICE
+
+#undef CONFIG_CMD_FLASH ? ? ? ? ? ? ? ?/* flinfo, erase, protect ? ? ? */
+#undef CONFIG_CMD_IMLS ? ? ? ? /* List all found images ? ? ? ?*/
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C ? ? ? ? ? ? ? ? ? ? ? ?1
+#define CONFIG_SYS_I2C_SPEED ? ? ? ? ? 100000
+#define CONFIG_SYS_I2C_SLAVE ? ? ? ? ? 1
+#define CONFIG_SYS_I2C_BUS ? ? ? ? ? ? 0
+#define CONFIG_SYS_I2C_BUS_SELECT ? ? ?1
+#define CONFIG_DRIVER_OMAP34XX_I2C ? ? 1
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER ? ? ? ? ? 1
+
+/* Environment information */
+#define CONFIG_BOOTCOMMAND \
+ ? ? ? "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
+
+#define CONFIG_BOOTDELAY ? ? ? ? ? ? ? 3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ? ? ? "usbtty=cdc_acm\0"
+
+#define CONFIG_AUTO_COMPLETE ? ? ? ? ? 1
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP ? ? ? ? ? ?/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER ? ? ? ? /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 ? ? "> "
+#define CONFIG_SYS_PROMPT ? ? ? ? ? ? ?"U-Boot # "
+#define CONFIG_SYS_CBSIZE ? ? ? ? ? ? ?256 ? ? /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE ? ? ? ? ? ? ?(CONFIG_SYS_CBSIZE + \
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS ? ? ? ? ? ? 16 ? ? ?/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE ? ? ? ? ? ?(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START ? ? ? (OMAP34XX_SDRC_CS0) ? ? /* memtest */
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* works on */
+#define CONFIG_SYS_MEMTEST_END ? ? ? ? (OMAP34XX_SDRC_CS0 + \
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0x01F00000) /* 31MB */
+
+#define CONFIG_SYS_LOAD_ADDR ? ? ? ? ? (OMAP34XX_SDRC_CS0) ? ? /* default */
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* load address */
+
+#define CONFIG_SYS_MONITOR_LEN ? ? ? ? (256 << 10)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE ? ? ? ? ? (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV ? ? ? ? ? ? ? ? 2 ? ? ? /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ ? ? ? ? ? ? ? ? ?1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE ? ? ? (128 << 10) ? ? /* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ *
+ */
+#define CONFIG_NR_DRAM_BANKS ? 2 ? ? ? /* CS1 may or may not be populated */
+#define PHYS_SDRAM_1 ? ? ? ? ? OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE ? ? ?(32 << 20) ? ? ?/*@least 32 meg */
+#define PHYS_SDRAM_2 ? ? ? ? ? OMAP34XX_SDRC_CS1
+
+/* SDRAM Bank Allocation method */
+#define SDRC_R_B_C ? ? ? ? ? ? 1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define PISMO1_ONEN_SIZE ? ? ? ? ? ? ? GPMC_SIZE_128M /* Configure the PISMO */
+
+#define CONFIG_SYS_ONENAND_BASE ? ? ? ? ? ? ? ?ONENAND_MAP
+
+#define ONENAND_ENV_OFFSET ? ? ? ? ? ? 0x260000 /* environment starts here */
+
+#define CONFIG_ENV_IS_IN_ONENAND ? ? ? 1
+#define CONFIG_ENV_SIZE ? ? ? ? ? ? ? ? ? ? ? ?(512 << 10) /* Total Size Environment */
+#define CONFIG_ENV_ADDR ? ? ? ? ? ? ? ? ? ? ? ?ONENAND_ENV_OFFSET
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ? ? ? ? ?(CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_GBL_DATA_SIZE ? ? ? 128 /* bytes for initial data */
+
+/*
+ * SMSC911x Ethernet
+ */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE ? ?0x2C000000
+#endif /* (CONFIG_CMD_NET) */
+
+#define CONFIG_SYS_SDRAM_BASE ? ? ? ? ?PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR ? ? ? ? ? ? ? ?(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+
+#endif /* __CONFIG_H */
--

1.7.1

#6 lore raw

v4 cover Add support for the IGEP v2 board.

In reply to Enric Balletbo i Serra
Quoted 29 lines

Hello,

This is the version 4 of patch series to add initial support for OMAP3 IGEP v2 board.

CHANGES:

* since v3
- [x/3] add Acked-by and Tested-by lines
- [3/3] fix warning in the build:

        igep0020.c: In function 'board_eth_init':
        igep0020.c:125: warning: implicit declaration of function
        'smc911x_initialize'

* since v2
- [1/3] keep lists sorted
- [2/3] fix multiline comment style
- [3/3] add entry to MAINTAINERS

* since v1
- [2/3] fix parens in NUMONYX_V_ACTIMB_165 define
- [3/3] add extra space after first &ctrl_base in file igep0020.c
- [3/3] add a space after the 57600 comma in file igep0020.h
- [3/3] remove CONFIG_SYS_ARM_WITHOUT_RELOC undef

Quoted 14 lines
$ git diff --stat origin/master
 MAINTAINERS                           |    4 +
 MAKEALL                               |    1 +
 arch/arm/include/asm/arch-omap3/mem.h |   43 ++++++
 board/isee/igep0020/Makefile          |   49 +++++++
 board/isee/igep0020/config.mk         |   33 +++++
 board/isee/igep0020/igep0020.c        |  129 +++++++++++++++++++
 board/isee/igep0020/igep0020.h        |  156 ++++++++++++++++++++++
 boards.cfg                            |    1 +
 drivers/mtd/onenand/onenand_base.c    |    1 +
 include/configs/igep0020.h            |  228
+++++++++++++++++++++++++++++++++
 include/linux/mtd/onenand.h           |    1 +
 11 files changed, 646 insertions(+), 0 deletions(-)

Enric,

Not all of your patches are applying to the latest tree. Can you please rebase and send updated patches. Best would be to rebase with u-boot-ti.

Regards,
Sandeep

#7 lore raw

v4 cover Add support for the IGEP v2 board.

.

Quoted 46 lines
Quoted 30 lines

Hello,

This is the version 4 of patch series to add initial support for OMAP3 IGEP v2 board.

CHANGES:

* since v3
- [x/3] add Acked-by and Tested-by lines
- [3/3] fix warning in the build:

        igep0020.c: In function 'board_eth_init':
        igep0020.c:125: warning: implicit declaration of function
        'smc911x_initialize'

* since v2
- [1/3] keep lists sorted
- [2/3] fix multiline comment style
- [3/3] add entry to MAINTAINERS

* since v1
- [2/3] fix parens in NUMONYX_V_ACTIMB_165 define
- [3/3] add extra space after first &ctrl_base in file igep0020.c
- [3/3] add a space after the 57600 comma in file igep0020.h
- [3/3] remove CONFIG_SYS_ARM_WITHOUT_RELOC undef

Quoted 14 lines
$ git diff --stat origin/master
 MAINTAINERS                           |    4 +
 MAKEALL                               |    1 +
 arch/arm/include/asm/arch-omap3/mem.h |   43 ++++++
 board/isee/igep0020/Makefile          |   49 +++++++
 board/isee/igep0020/config.mk         |   33 +++++
 board/isee/igep0020/igep0020.c        |  129 +++++++++++++++++++
 board/isee/igep0020/igep0020.h        |  156 ++++++++++++++++++++++
 boards.cfg                            |    1 +
 drivers/mtd/onenand/onenand_base.c    |    1 +
 include/configs/igep0020.h            |  228
+++++++++++++++++++++++++++++++++
 include/linux/mtd/onenand.h           |    1 +
 11 files changed, 646 insertions(+), 0 deletions(-)
Quoted 4 lines

Enric,

Not all of your patches are applying to the latest tree. Can you please rebase and send updated patches. Best would be to rebase with u-boot-ti.

Is ok. I don't need you to send updated patches.

I have rebased and fixed them myself. You can take a look at.

http://git.denx.de/u-boot.git/?p=u-boot/u-boot-ti.git;a=summary

I am working through some more sets of patches. After that I will send Wolfgang a pull request.

Thanks,
Sandeep