Add support for the IGEP v2 board.
v4 cover Add support for the IGEP v2 board.
Hello,
This is the version 4 of patch series to add initial support for OMAP3 IGEP v2 board.
CHANGES:
* since v3
- [x/3] add Acked-by and Tested-by lines
- [3/3] fix warning in the build:
igep0020.c: In function 'board_eth_init':
igep0020.c:125: warning: implicit declaration of function
'smc911x_initialize'* since v2
- [1/3] keep lists sorted
- [2/3] fix multiline comment style
- [3/3] add entry to MAINTAINERS
* since v1
- [2/3] fix parens in NUMONYX_V_ACTIMB_165 define
- [3/3] add extra space after first &ctrl_base in file igep0020.c
- [3/3] add a space after the 57600 comma in file igep0020.h
- [3/3] remove CONFIG_SYS_ARM_WITHOUT_RELOC undef
$ git diff --stat origin/master MAINTAINERS | 4 + MAKEALL | 1 + arch/arm/include/asm/arch-omap3/mem.h | 43 ++++++ board/isee/igep0020/Makefile | 49 +++++++ board/isee/igep0020/config.mk | 33 +++++ board/isee/igep0020/igep0020.c | 129 +++++++++++++++++++ board/isee/igep0020/igep0020.h | 156 ++++++++++++++++++++++ boards.cfg | 1 + drivers/mtd/onenand/onenand_base.c | 1 + include/configs/igep0020.h | 228 +++++++++++++++++++++++++++++++++ include/linux/mtd/onenand.h | 1 + 11 files changed, 646 insertions(+), 0 deletions(-)
PATCH v4 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx
This patch adds the Numonyx manufacturer code (0x20) to onenand manufacturers.
--- drivers/mtd/onenand/onenand_base.c | 1 + include/linux/mtd/onenand.h | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)
drivers/mtd/onenand/onenand_base.c +1 -0
@@ -2213,6 +2213,7 @@ char *onenand_print_device_info(int device, int version) }static const struct onenand_manufacturers onenand_manuf_ids[] = { + {ONENAND_MFR_NUMONYX ,"Numonyx" }, {ONENAND_MFR_SAMSUNG ,"Samsung" }, };
include/linux/mtd/onenand.h +1 -0
@@ -154,6 +154,7 @@ struct onenand_chip {/* * OneNAND Flash Manufacturer ID Codes */ +#define ONENAND_MFR_NUMONYX 0x20#define ONENAND_MFR_SAMSUNG 0xec/**
Signature · 1 line
1.7.1
PATCH v4 1/3 mtd: OneNAND: add support for OneNAND manufactured by Numonyx
Quoted 11 lines · Enric Balletbo i Serra
This patch adds the Numonyx manufacturer code (
0x20) to onenand manufacturers.Signed-off-by Enric Balletbo i Serra <[email protected]>Acked-by Kyungmin Park <[email protected]>Acked-by Steve Sakoman <[email protected]>Tested-by Steve Sakoman <[email protected]>--- drivers/mtd/onenand/onenand_base.c | 1 + include/linux/mtd/onenand.h | 1 + 2 files changed, 2 insertions(+), 0 deletions(-)
Applied to u-boot-nand-flash.
-Scott
PATCH v4 2/3 OMAP3: SDRC: Introduce Numonyx DDR type
In reply to Enric Balletbo i SerraIntroduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings.
--- arch/arm/include/asm/arch-omap3/mem.h | 43 +++++++++++++++++++++++++++++++++ 1 files changed, 43 insertions(+), 0 deletions(-)
arch/arm/include/asm/arch-omap3/mem.h +43 -0
@@ -128,6 +128,45 @@ enum { (MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \ (MICRON_TWTR_165 << 16)) +/* +* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns +* ACTIMA +* TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 +* TDPL (Twr) = 15/6 = 2.5 -> 3 +* TRRD = 12/6 = 2 +* TRCD = 22.5/6 = 3.75 -> 4 +* TRP = 18/6 = 3 +* TRAS = 42/6 = 7 +* TRC = 60/6 = 10 +* TRFC = 140/6 = 23.3 -> 24 +* ACTIMB +* TWTR = 2 +* TCKE = 2 +* TXSR = 200/6 = 33.3 -> 34 +* TXP = 1.0 + 1.1 = 2.1 -> 3 +*/ +#define NUMONYX_TDAL_165 6 +#define NUMONYX_TDPL_165 3 +#define NUMONYX_TRRD_165 2 +#define NUMONYX_TRCD_165 4 +#define NUMONYX_TRP_165 3 +#define NUMONYX_TRAS_165 7 +#define NUMONYX_TRC_165 10 +#define NUMONYX_TRFC_165 24 +#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \ + (NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \ + (NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \ + (NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \ + (NUMONYX_TDAL_165)) + +#define NUMONYX_TWTR_165 2 +#define NUMONYX_TCKE_165 2 +#define NUMONYX_TXP_165 3 +#define NUMONYX_XSR_165 34 +#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \ + (NUMONYX_XSR_165 << 0) | (NUMONYX_TXP_165 << 8) | \ + (NUMONYX_TWTR_165 << 16)) +#ifdef CONFIG_OMAP3_INFINEON_DDR #define V_ACTIMA_165 INFINEON_V_ACTIMA_165#define V_ACTIMB_165 INFINEON_V_ACTIMB_165
@@ -136,6 +175,10 @@ enum {#define V_ACTIMA_165 MICRON_V_ACTIMA_165#define V_ACTIMB_165 MICRON_V_ACTIMB_165#endif +#ifdef CONFIG_OMAP3_NUMONYX_DDR +#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165 +#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165 +#endif #if !defined(V_ACTIMA_165 ) || !defined(V_ACTIMB_165 )#error "Please choose the right DDR type in config header"
Signature · 1 line
1.7.1
PATCH v4 3/3 OMAP3: Add support for the IGEP v2 board.
In reply to Enric Balletbo i SerraThe IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.
--- MAINTAINERS | 4 + MAKEALL | 1 + board/isee/igep0020/Makefile | 49 +++++++++ board/isee/igep0020/config.mk | 33 ++++++ board/isee/igep0020/igep0020.c | 129 ++++++++++++++++++++++ board/isee/igep0020/igep0020.h | 156 +++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/igep0020.h | 228 ++++++++++++++++++++++++++++++++++++++++ 8 files changed, 601 insertions(+), 0 deletions(-) create mode 100644 board/isee/igep0020/Makefile create mode 100644 board/isee/igep0020/config.mk create mode 100644 board/isee/igep0020/igep0020.c create mode 100644 board/isee/igep0020/igep0020.h create mode 100644 include/configs/igep0020.h
MAINTAINERS +4 -0
@@ -818,6 +818,10 @@ Alex Z lart SA1100 dnp1110 SA1110 +Enric Balletbo i Serra <[email protected]> + + igep0020 ARM ARMV7 (OMAP3xx SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards:
MAKEALL +1 -0
@@ -490,6 +490,7 @@ LIST_ARM11=" \ LIST_ARMV7=" \ am3517_evm \ devkit8000 \ + igep0020 \ mx51evk \ omap3_beagle \ omap3_overo \
board/isee/igep0020/Makefile new file +49 -0
49 lines not on this page · raw message
board/isee/igep0020/config.mk new file +33 -0
@@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# ISEE 2007 SL, <www.iseebcn.com> +# +# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80008000
board/isee/igep0020/igep0020.c new file +129 -0
129 lines not on this page · raw message
board/isee/igep0020/igep0020.h new file +156 -0
156 lines not on this page · raw message
boards.cfg +1 -0
@@ -262,6 +262,7 @@ omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 am3517_evm arm armv7 am3517evm logicpd omap3 devkit8000 arm armv7 devkit8000 timll omap3 +igep0020 arm armv7 igep0020 isee omap3 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx ixdpg425 arm ixp
include/configs/igep0020.h new file +228 -0
228 lines not on this page · raw message
Signature · 1 line
1.7.1
PATCH v4 3/3 OMAP3: Add support for the IGEP v2 board.
Sorry, this is the version 4
2010/10/11 Enric Balletbo i Serra <[email protected]>:
Quoted 692 lines
The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards.
Signed-off-by Enric Balletbo i Serra <[email protected]>Acked-by Steve Sakoman <[email protected]>Tested-by Steve Sakoman <[email protected]>---
?MAINTAINERS ? ? ? ? ? ? ? ? ? ?| ? ?4 + ?MAKEALL ? ? ? ? ? ? ? ? ? ? ? ?| ? ?1 + ?board/isee/igep0020/Makefile ? | ? 49 +++++++++ ?board/isee/igep0020/config.mk ?| ? 33 ++++++ ?board/isee/igep0020/igep0020.c | ?129 ++++++++++++++++++++++ ?board/isee/igep0020/igep0020.h | ?156 +++++++++++++++++++++++++++ ?boards.cfg ? ? ? ? ? ? ? ? ? ? | ? ?1 + ?include/configs/igep0020.h ? ? | ?228 ++++++++++++++++++++++++++++++++++++++++?8 files changed, 601 insertions(+), 0 deletions(-) ?create mode 100644 board/isee/igep0020/Makefile ?create mode 100644
board/isee/igep0020/config.mk?create mode 100644board/isee/igep0020/igep0020.c?create mode 100644board/isee/igep0020/igep0020.h?create mode 100644include/configs/igep0020.hMAINTAINERS +0
-0@@ -818,6 +818,10 @@ Alex Z? ? ? ?lart ? ? ? ? ? ?SA1100
? ? ? ?dnp1110 ? ? ? ? SA1110MAINTAINERS +4
-0+Enric Balletbo i Serra <[email protected]> + + ? ? ? igep0020 ? ? ? ?ARM ARMV7 (OMAP3xx SoC) +?-------------------------------------------------------------------------
?Unknown / orphaned boards:
MAKEALL +1
-0@@ -490,6 +490,7 @@ LIST_ARM11=" ? ? ? ? ? ? ? ? ? ? ? ?\ ?LIST_ARMV7=" ? ? ? ? ? \ ? ? ? ?am3517_evm ? ? ? ? ? ? ?\ ? ? ? ?devkit8000 ? ? ? ? ? ? ?\ + ? ? ? igep0020 ? ? ? ? ? ? ? ?\ ? ? ? ?mx51evk ? ? ? ? ? ? ? ? \ ? ? ? ?omap3_beagle ? ? ? ? ? ?\ ? ? ? ?omap3_overo ? ? ? ? ? ? \board/isee/igep0020/Makefile new file +49
-0@@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB ? ?= $(obj)lib$(BOARD).a + +COBJS ?:= igep0020.o + +SRCS ? := $(COBJS:.o=.c) +OBJS ? := $(addprefix $(obj),$(COBJS)) + +$(LIB): ? ? ? ?$(obj).depend $(OBJS) + ? ? ? $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + ? ? ? rm -f $(OBJS) + +distclean: ? ? clean + ? ? ? rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################board/isee/igep0020/config.mk new file +33
-0@@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# ISEE 2007 SL, <www.iseebcn.com> +# +# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80008000board/isee/igep0020/igep0020.c new file +129
-0@@ -0,0 +1,129 @@ +/* +* (C) Copyright 2010 +* ISEE 2007 SL, <www.iseebcn.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#include <common.h> +#include <netdev.h> +#include <twl4030.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "igep0020.h" + +/* GPMC definitions for LAN9221 chips */ +static const u32 gpmc_lan_config[] = { + ? ?NET_LAN9221_GPMC_CONFIG1, + ? ?NET_LAN9221_GPMC_CONFIG2, + ? ?NET_LAN9221_GPMC_CONFIG3, + ? ?NET_LAN9221_GPMC_CONFIG4, + ? ?NET_LAN9221_GPMC_CONFIG5, + ? ?NET_LAN9221_GPMC_CONFIG6, +}; + +/* +* Routine: board_init +* Description: Early hardware init. +*/ +int board_init (void ) +{ + ? ? ? DECLARE_GLOBAL_DATA_PTR; + + ? ? ? gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + ? ? ? /* board id for Linux */ + ? ? ? gd->bd->bi_arch_number = MACH_TYPE_IGEP0020; + ? ? ? /* boot param addr */ + ? ? ? gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + ? ? ? return 0; +} + +/* +* Routine: setup_net_chip +* Description: Setting up the configuration GPMC registers specific to the +* ? ? ? ? ? ? Ethernet hardware. +*/ +#if defined(CONFIG_CMD_NET ) +static void setup_net_chip (void ) +{ + ? ? ? struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + ? ? ? enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, + ? ? ? ? ? ? ? ? ? ? ? GPMC_SIZE_16M); + + ? ? ? /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + ? ? ? writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + ? ? ? /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + ? ? ? writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + ? ? ? /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + ? ? ? writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + ? ? ? ? ? ? ? &ctrl_base->gpmc_nadv_ale); + + ? ? ? /* Make GPIO 64 as output pin and send a magic pulse through it */ + ? ? ? if (!omap_request_gpio(64)) { + ? ? ? ? ? ? ? omap_set_gpio_direction(64, 0); + ? ? ? ? ? ? ? omap_set_gpio_dataout(64, 1); + ? ? ? ? ? ? ? udelay(1); + ? ? ? ? ? ? ? omap_set_gpio_dataout(64, 0); + ? ? ? ? ? ? ? udelay(1); + ? ? ? ? ? ? ? omap_set_gpio_dataout(64, 1); + ? ? ? } +} +#endif + +/* +* Routine: misc_init_r +* Description: Configure board specific parts +*/ +int misc_init_r (void ) +{ + ? ? ? twl4030_power_init(); + +#if defined(CONFIG_CMD_NET ) + ? ? ? setup_net_chip(); +#endif + + ? ? ? dieid_num_r(); + + ? ? ? return 0; +} + +/* +* Routine: set_muxconf_regs +* Description: Setting up the configuration Mux registers specific to the +* ? ? ? ? ? ? hardware. Many pins need to be moved from protect to primary +* ? ? ? ? ? ? mode. +*/ +void set_muxconf_regs (void ) +{ + ? ? ? MUX_DEFAULT(); +} + +int board_eth_init (bd_t *bis) +{ + ? ? ? int rc = 0; +#ifdef CONFIG_SMC911X + ? ? ? rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + ? ? ? return rc; +}board/isee/igep0020/igep0020.h new file +156
-0@@ -0,0 +1,156 @@ +/* +* (C) Copyright 2010 +* ISEE 2007 SL, <www.iseebcn.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#ifndef _IGEP0020_H_ +#define _IGEP0020_H_ + +const omap3_sysinfo sysinfo = { + ? ? ? DDR_STACKED, + ? ? ? "IGEP v2 board", + ? ? ? "ONENAND", +}; + +/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */ +#define NET_LAN9221_GPMC_CONFIG1 ? ?0x00001000 +#define NET_LAN9221_GPMC_CONFIG2 ? ?0x00080701 +#define NET_LAN9221_GPMC_CONFIG3 ? ?0x00020201 +#define NET_LAN9221_GPMC_CONFIG4 ? ?0x08030703 +#define NET_LAN9221_GPMC_CONFIG5 ? ?0x00060908 +#define NET_LAN9221_GPMC_CONFIG6 ? ?0x87030000 +#define NET_LAN9221_GPMC_CONFIG7 ? ?0x00000f6c + +static void setup_net_chip (void ); + +/* +* IEN ?- Input Enable +* IDIS - Input Disable +* PTD ?- Pull type Down +* PTU ?- Pull type Up +* DIS ?- Pull type selection is inactive +* EN ? - Pull type selection is active +* M0 ? - Mode 0 +* The commented string gives the final mux configuration for that pin +*/ +#define MUX_DEFAULT()\ + ? ? ? MUX_VAL(CP(SDRC_D0), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D0 */\ + ? ? ? MUX_VAL(CP(SDRC_D1), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D1 */\ + ? ? ? MUX_VAL(CP(SDRC_D2), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D2 */\ + ? ? ? MUX_VAL(CP(SDRC_D3), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D3 */\ + ? ? ? MUX_VAL(CP(SDRC_D4), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D4 */\ + ? ? ? MUX_VAL(CP(SDRC_D5), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D5 */\ + ? ? ? MUX_VAL(CP(SDRC_D6), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D6 */\ + ? ? ? MUX_VAL(CP(SDRC_D7), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D7 */\ + ? ? ? MUX_VAL(CP(SDRC_D8), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D8 */\ + ? ? ? MUX_VAL(CP(SDRC_D9), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_D9 */\ + ? ? ? MUX_VAL(CP(SDRC_D10), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D10 */\ + ? ? ? MUX_VAL(CP(SDRC_D11), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D11 */\ + ? ? ? MUX_VAL(CP(SDRC_D12), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D12 */\ + ? ? ? MUX_VAL(CP(SDRC_D13), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D13 */\ + ? ? ? MUX_VAL(CP(SDRC_D14), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D14 */\ + ? ? ? MUX_VAL(CP(SDRC_D15), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D15 */\ + ? ? ? MUX_VAL(CP(SDRC_D16), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D16 */\ + ? ? ? MUX_VAL(CP(SDRC_D17), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D17 */\ + ? ? ? MUX_VAL(CP(SDRC_D18), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D18 */\ + ? ? ? MUX_VAL(CP(SDRC_D19), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D19 */\ + ? ? ? MUX_VAL(CP(SDRC_D20), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D20 */\ + ? ? ? MUX_VAL(CP(SDRC_D21), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D21 */\ + ? ? ? MUX_VAL(CP(SDRC_D22), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D22 */\ + ? ? ? MUX_VAL(CP(SDRC_D23), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D23 */\ + ? ? ? MUX_VAL(CP(SDRC_D24), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D24 */\ + ? ? ? MUX_VAL(CP(SDRC_D25), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D25 */\ + ? ? ? MUX_VAL(CP(SDRC_D26), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D26 */\ + ? ? ? MUX_VAL(CP(SDRC_D27), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D27 */\ + ? ? ? MUX_VAL(CP(SDRC_D28), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D28 */\ + ? ? ? MUX_VAL(CP(SDRC_D29), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D29 */\ + ? ? ? MUX_VAL(CP(SDRC_D30), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D30 */\ + ? ? ? MUX_VAL(CP(SDRC_D31), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_D31 */\ + ? ? ? MUX_VAL(CP(SDRC_CLK), ? ? ? (IEN ?| PTD | DIS | M0)) /* SDRC_CLK */\ + ? ? ? MUX_VAL(CP(SDRC_DQS0), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS0 */\ + ? ? ? MUX_VAL(CP(SDRC_DQS1), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS1 */\ + ? ? ? MUX_VAL(CP(SDRC_DQS2), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS2 */\ + ? ? ? MUX_VAL(CP(SDRC_DQS3), ? ? ?(IEN ?| PTD | DIS | M0)) /* SDRC_DQS3 */\ + ? ? ? MUX_VAL(CP(GPMC_A1), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A1 */\ + ? ? ? MUX_VAL(CP(GPMC_A2), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A2 */\ + ? ? ? MUX_VAL(CP(GPMC_A3), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A3 */\ + ? ? ? MUX_VAL(CP(GPMC_A4), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A4 */\ + ? ? ? MUX_VAL(CP(GPMC_A5), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A5 */\ + ? ? ? MUX_VAL(CP(GPMC_A6), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A6 */\ + ? ? ? MUX_VAL(CP(GPMC_A7), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A7 */\ + ? ? ? MUX_VAL(CP(GPMC_A8), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A8 */\ + ? ? ? MUX_VAL(CP(GPMC_A9), ? ? ? ?(IDIS | PTD | DIS | M0)) /* GPMC_A9 */\ + ? ? ? MUX_VAL(CP(GPMC_A10), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\ + ? ? ? MUX_VAL(CP(GPMC_D0), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D0 */\ + ? ? ? MUX_VAL(CP(GPMC_D1), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D1 */\ + ? ? ? MUX_VAL(CP(GPMC_D2), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D2 */\ + ? ? ? MUX_VAL(CP(GPMC_D3), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D3 */\ + ? ? ? MUX_VAL(CP(GPMC_D4), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D4 */\ + ? ? ? MUX_VAL(CP(GPMC_D5), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D5 */\ + ? ? ? MUX_VAL(CP(GPMC_D6), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D6 */\ + ? ? ? MUX_VAL(CP(GPMC_D7), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D7 */\ + ? ? ? MUX_VAL(CP(GPMC_D8), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D8 */\ + ? ? ? MUX_VAL(CP(GPMC_D9), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_D9 */\ + ? ? ? MUX_VAL(CP(GPMC_D10), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D10 */\ + ? ? ? MUX_VAL(CP(GPMC_D11), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D11 */\ + ? ? ? MUX_VAL(CP(GPMC_D12), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D12 */\ + ? ? ? MUX_VAL(CP(GPMC_D13), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D13 */\ + ? ? ? MUX_VAL(CP(GPMC_D14), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D14 */\ + ? ? ? MUX_VAL(CP(GPMC_D15), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_D15 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS0), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS0 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS1), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS1 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS2), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPIO_nCS2 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS3), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPIO_nCS3 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS4), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS4 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS5), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS5 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS6), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS6 */\ + ? ? ? MUX_VAL(CP(GPMC_NCS7), ? ? ?(IDIS | PTU | EN ?| M0)) /* GPMC_nCS7 */\ + ? ? ? MUX_VAL(CP(GPMC_CLK), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\ + ? ? ? MUX_VAL(CP(GPMC_NADV_ALE), ?(IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\ + ? ? ? MUX_VAL(CP(GPMC_NOE), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\ + ? ? ? MUX_VAL(CP(GPMC_NWE), ? ? ? (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\ + ? ? ? MUX_VAL(CP(GPMC_NBE0_CLE), ?(IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\ + ? ? ? MUX_VAL(CP(GPMC_NBE1), ? ? ?(IEN ?| PTD | DIS | M0)) /* GPMC_nBE1 */\ + ? ? ? MUX_VAL(CP(GPMC_NWP), ? ? ? (IEN ?| PTD | DIS | M0)) /* GPMC_nWP */\ + ? ? ? MUX_VAL(CP(GPMC_WAIT0), ? ? (IEN ?| PTU | EN ?| M0)) /* GPMC_WAIT0 */\ + ? ? ? MUX_VAL(CP(GPMC_WAIT2), ? ? (IEN ?| PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\ + ? ? ? MUX_VAL(CP(MMC1_CLK), ? ? ? (IDIS | PTU | EN ?| M0)) /* MMC1_CLK */\ + ? ? ? MUX_VAL(CP(MMC1_CMD), ? ? ? (IEN ?| PTU | EN ?| M0)) /* MMC1_CMD */\ + ? ? ? MUX_VAL(CP(MMC1_DAT0), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT0 */\ + ? ? ? MUX_VAL(CP(MMC1_DAT1), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT1 */\ + ? ? ? MUX_VAL(CP(MMC1_DAT2), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT2 */\ + ? ? ? MUX_VAL(CP(MMC1_DAT3), ? ? ?(IEN ?| PTU | EN ?| M0)) /* MMC1_DAT3 */\ + ? ? ? MUX_VAL(CP(UART3_TX_IRTX), ?(IDIS | PTD | DIS | M0)) /* UART3_TX */\ + ? ? ? MUX_VAL(CP(UART3_RX_IRRX), ?(IEN ?| PTD | DIS | M0)) /* UART3_RX */\ + ? ? ? MUX_VAL(CP(I2C1_SCL), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C1_SCL */\ + ? ? ? MUX_VAL(CP(I2C1_SDA), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C1_SDA */\ + ? ? ? MUX_VAL(CP(I2C4_SCL), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C4_SCL */\ + ? ? ? MUX_VAL(CP(I2C4_SDA), ? ? ? (IEN ?| PTU | EN ?| M0)) /* I2C4_SDA */\ + ? ? ? MUX_VAL(CP(SYS_32K), ? ? ? ?(IEN ?| PTD | DIS | M0)) /* SYS_32K */\ + ? ? ? MUX_VAL(CP(SYS_BOOT0), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_2 */\ + ? ? ? MUX_VAL(CP(SYS_BOOT1), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_3 */\ + ? ? ? MUX_VAL(CP(SYS_BOOT2), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_4 */\ + ? ? ? MUX_VAL(CP(SYS_BOOT3), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_5 */\ + ? ? ? MUX_VAL(CP(SYS_BOOT4), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_6 */\ + ? ? ? MUX_VAL(CP(SYS_BOOT5), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_7 */\ + ? ? ? MUX_VAL(CP(SYS_BOOT6), ? ? ?(IEN ?| PTD | DIS | M4)) /* GPIO_8 */\ + ? ? ? MUX_VAL(CP(SDRC_CKE0), ? ? ?(IDIS | PTU | EN ?| M0)) /* SDRC_CKE0 */\ + ? ? ? MUX_VAL(CP(SDRC_CKE1), ? ? ?(IDIS | PTU | EN ?| M0)) /* SDRC_CKE1 */ +#endif boards.cfg +0
-0@@ -262,6 +262,7 @@ omap4_panda arm ? ? armv7 ? ? ? ? ? panda ? ? ? ? ? ti ? ? ? ? ? ? ?omap4?omap4_sdp4430 ?arm ? ? armv7 ? ? ? ? ? sdp4430 ? ? ? ? ti ? ? ? ? ? ? ?omap4 ?am3517_evm ? ? arm ? ? armv7 ? ? ? ? ? am3517evm ? ? ? logicpd ? ? ? ? omap3 ?devkit8000 ? ? arm ? ? armv7 ? ? ? ? ? devkit8000 ? ? ?timll ? ? ? ? ? omap3 +igep0020 ? ? ? arm ? ? armv7 ? ? ? ? ? igep0020 ? ? ? ?isee ? ? ? ? ? ?omap3 ?s5p_goni ? ? ? arm ? ? armv7 ? ? ? ? ? goni ? ? ? ? ? ?samsung ? ? ? ? s5pc1xx ?smdkc100 ? ? ? arm ? ? armv7 ? ? ? ? ? smdkc100 ? ? ? ?samsung ? ? ? ? s5pc1xx ?ixdpg425 ? ? ? arm ? ? ixp
include/configs/igep0020.h new file +228
-1@@ -0,0 +1,228 @@ +/* +* (C) Copyright 2010 +* ISEE 2007 SL, <www.iseebcn.com> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ? ? ? ? See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* +* High Level Configuration Options +*/ +#define CONFIG_ARMV7 ? ? ? ? ? 1 ? ? ?/* This is an ARM V7 CPU core */ +#define CONFIG_OMAP ? ? ? ? ? ?1 ? ? ?/* in a TI OMAP core */ +#define CONFIG_OMAP34XX ? ? ? ? ? ? ? ?1 ? ? ?/* which is a 34XX */ +#define CONFIG_OMAP3430 ? ? ? ? ? ? ? ?1 ? ? ?/* which is in a 3430 */ +#define CONFIG_OMAP3_IGEP0020 ?1 ? ? ?/* working with IGEP0020 */ + +#define CONFIG_SDRC ? ?/* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* +* Display CPU and Board information +*/ +#define CONFIG_DISPLAY_CPUINFO ? ? ? ? 1 +#define CONFIG_DISPLAY_BOARDINFO ? ? ? 1 + +/* Clock Defines */ +#define V_OSCK ? ? ? ? ? ? ? ? 26000000 ? ? ? ?/* Clock output from T2 */ +#define V_SCLK ? ? ? ? ? ? ? ? (V_OSCK >> 1) + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG ? ? ? ? ? ? 1 ? ? ?/* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS ? ? ? 1 +#define CONFIG_INITRD_TAG ? ? ? ? ? ? ?1 +#define CONFIG_REVISION_TAG ? ? ? ? ? ?1 + +/* +* NS16550 Configuration +*/ + +#define V_NS16550_CLK ? ? ? ? ? ? ? ? ?48000000 ? ? ? ?/* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE ? ?(-4) +#define CONFIG_SYS_NS16550_CLK ? ? ? ? V_NS16550_CLK + +/* select serial console configuration */ +#define CONFIG_CONS_INDEX ? ? ? ? ? ? ?3 +#define CONFIG_SYS_NS16550_COM3 ? ? ? ? ? ? ? ?OMAP34XX_UART3 +#define CONFIG_SERIAL3 ? ? ? ? ? ? ? ? 3 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE ? ? ? ? ? ? ? ? ? ? ? ?115200 +#define CONFIG_SYS_BAUDRATE_TABLE ? ? ?{4800, 9600, 19200, 38400, 57600, 115200} +#define CONFIG_MMC ? ? ? ? ? ? ? ? ? ? 1 +#define CONFIG_OMAP3_MMC ? ? ? ? ? ? ? 1 +#define CONFIG_DOS_PARTITION ? ? ? ? ? 1 + +/* DDR ?*/ +#define CONFIG_OMAP3_NUMONYX_DDR ? ? ? 1 + +/* USB */ +#define CONFIG_MUSB_UDC ? ? ? ? ? ? ? ? ? ? ? ?1 +#define CONFIG_USB_OMAP3 ? ? ? ? ? ? ? 1 +#define CONFIG_TWL4030_USB ? ? ? ? ? ? 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE ? ? ? ? ? ? ?1 +#define CONFIG_USB_TTY ? ? ? ? ? ? ? ? 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV ? 1 + +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID ? ? ? ? ? 0x0451 +#define CONFIG_USBD_PRODUCTID ? ? ? ? ?0x5678 +#define CONFIG_USBD_MANUFACTURER ? ? ? "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME ? ? ? "IGEP" + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 ? ? ? ? ? ? ? ?/* EXT2 Support ? ? ? ? ? ? ? ? */ +#define CONFIG_CMD_FAT ? ? ? ?/* FAT support ? ? ? ? ? ? ? ? ?*/ +#define CONFIG_CMD_I2C ? ? ? ?/* I2C serial bus support ? ? ? */ +#define CONFIG_CMD_MMC ? ? ? ?/* MMC support ? ? ? ? ? ? ? ? ?*/ +#define CONFIG_CMD_ONENAND ? ?/* ONENAND support ? ? ? ? ? ? ?*/ +#define CONFIG_CMD_NET ? ? ? ?/* bootp, tftpboot, rarpboot ? ?*/ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS ? ? ? ?/* NFS support ? ? ? ? ? ? ? ? ?*/ +#define CONFIG_CMD_MTDPARTS ? ?/* Enable MTD parts commands ? ?*/ +#define CONFIG_MTD_DEVICE + +#undef CONFIG_CMD_FLASH ? ? ? ? ? ? ? ?/* flinfo, erase, protect ? ? ? */ +#undef CONFIG_CMD_IMLS ? ? ? ?/* List all found images ? ? ? ?*/ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C ? ? ? ? ? ? ? ? ? ? ? ?1 +#define CONFIG_SYS_I2C_SPEED ? ? ? ? ? 100000 +#define CONFIG_SYS_I2C_SLAVE ? ? ? ? ? 1 +#define CONFIG_SYS_I2C_BUS ? ? ? ? ? ? 0 +#define CONFIG_SYS_I2C_BUS_SELECT ? ? ?1 +#define CONFIG_DRIVER_OMAP34XX_I2C ? ? 1 + +/* +* TWL4030 +*/ +#define CONFIG_TWL4030_POWER ? ? ? ? ? 1 + +/* Environment information */ +#define CONFIG_BOOTCOMMAND \ + ? ? ? "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0" + +#define CONFIG_BOOTDELAY ? ? ? ? ? ? ? 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + ? ? ? "usbtty=cdc_acm\0" + +#define CONFIG_AUTO_COMPLETE ? ? ? ? ? 1 + +/* +* Miscellaneous configurable options +*/ +#define CONFIG_SYS_LONGHELP ? ? ? ? ? ?/* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER ? ? ? ?/* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 ? ? "> " +#define CONFIG_SYS_PROMPT ? ? ? ? ? ? ?"U-Boot # " +#define CONFIG_SYS_CBSIZE ? ? ? ? ? ? ?256 ? ?/* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE ? ? ? ? ? ? ?(CONFIG_SYS_CBSIZE + \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS ? ? ? ? ? ? 16 ? ? ?/* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE ? ? ? ? ? ?(CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START ? ? ? (OMAP34XX_SDRC_CS0) ? ?/* memtest */ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* works on */ +#define CONFIG_SYS_MEMTEST_END ? ? ? ? (OMAP34XX_SDRC_CS0 + \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0x01F00000)/* 31MB */ + +#define CONFIG_SYS_LOAD_ADDR ? ? ? ? ? (OMAP34XX_SDRC_CS0) ? ?/* default */ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? /* load address */ + +#define CONFIG_SYS_MONITOR_LEN ? ? ? ? (256 << 10) + +/* +* OMAP3 has 12 GP timers, they can be driven by the system clock +* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). +* This rate is divided by a local divisor. +*/ +#define CONFIG_SYS_TIMERBASE ? ? ? ? ? (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV ? ? ? ? ? ? ? ? 2 ? ? ?/* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ ? ? ? ? ? ? ? ? ?1000 + +/* +* Stack sizes +* +* The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE ? ? ? (128 << 10) ? ?/* regular stack 128 KiB */ + +/* +* Physical Memory Map +* +*/ +#define CONFIG_NR_DRAM_BANKS ? 2 ? ? ?/* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 ? ? ? ? ? OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE ? ? ?(32 << 20) ? ? ?/*@least 32 meg */ +#define PHYS_SDRAM_2 ? ? ? ? ? OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C ? ? ? ? ? ? 1 + +/* +* FLASH and environment organization +*/ + +#define PISMO1_ONEN_SIZE ? ? ? ? ? ? ? GPMC_SIZE_128M/* Configure the PISMO */ + +#define CONFIG_SYS_ONENAND_BASE ? ? ? ? ? ? ? ?ONENAND_MAP + +#define ONENAND_ENV_OFFSET ? ? ? ? ? ? 0x260000/* environment starts here */ + +#define CONFIG_ENV_IS_IN_ONENAND ? ? ? 1 +#define CONFIG_ENV_SIZE ? ? ? ? ? ? ? ? ? ? ? ?(512 << 10)/* Total Size Environment */ +#define CONFIG_ENV_ADDR ? ? ? ? ? ? ? ? ? ? ? ?ONENAND_ENV_OFFSET + +/* +* Size of malloc() pool +*/ +#define CONFIG_SYS_MALLOC_LEN ? ? ? ? ?(CONFIG_ENV_SIZE + (128 << 10)) +#define CONFIG_SYS_GBL_DATA_SIZE ? ? ? 128/* bytes for initial data */ + +/* +* SMSC911x Ethernet +*/ +#if defined(CONFIG_CMD_NET ) +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE ? ?0x2C000000 +#endif /* (CONFIG_CMD_NET) */ + +#define CONFIG_SYS_SDRAM_BASE ? ? ? ? ?PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR ? ? ? ? ? ? ? ?(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) + +#endif /* __CONFIG_H */ --1.7.1
Paulraj
v4 cover Add support for the IGEP v2 board.
In reply to Enric Balletbo i SerraQuoted 29 lines
Hello,
This is the version 4 of patch series to add initial support for OMAP3 IGEP v2 board.
CHANGES:
* since v3
- [x/3] add Acked-by and Tested-by lines
- [3/3] fix warning in the build:igep0020.c: In function 'board_eth_init': igep0020.c:125: warning: implicit declaration of function 'smc911x_initialize'* since v2
- [1/3] keep lists sorted
- [2/3] fix multiline comment style
- [3/3] add entry toMAINTAINERS* since v1
- [2/3] fix parens inNUMONYX_V_ACTIMB_165define
- [3/3] add extra space after first&ctrl_basein fileigep0020.c
- [3/3] add a space after the 57600 comma in fileigep0020.h
- [3/3] removeCONFIG_SYS_ARM_WITHOUT_RELOCundef
Quoted 14 lines
$ git diff --stat origin/master MAINTAINERS | 4 + MAKEALL | 1 + arch/arm/include/asm/arch-omap3/mem.h | 43 ++++++ board/isee/igep0020/Makefile | 49 +++++++ board/isee/igep0020/config.mk | 33 +++++ board/isee/igep0020/igep0020.c | 129 +++++++++++++++++++ board/isee/igep0020/igep0020.h | 156 ++++++++++++++++++++++ boards.cfg | 1 + drivers/mtd/onenand/onenand_base.c | 1 + include/configs/igep0020.h | 228 +++++++++++++++++++++++++++++++++ include/linux/mtd/onenand.h | 1 + 11 files changed, 646 insertions(+), 0 deletions(-)
Enric,
Not all of your patches are applying to the latest tree. Can you please rebase and send updated patches. Best would be to rebase with u-boot-ti.
Regards,
Sandeep
Paulraj
v4 cover Add support for the IGEP v2 board.
.
Quoted 46 lines
Quoted 30 lines
Hello,
This is the version 4 of patch series to add initial support for OMAP3 IGEP v2 board.
CHANGES:
* since v3
- [x/3] add Acked-by and Tested-by lines
- [3/3] fix warning in the build:igep0020.c: In function 'board_eth_init': igep0020.c:125: warning: implicit declaration of function 'smc911x_initialize'* since v2
- [1/3] keep lists sorted
- [2/3] fix multiline comment style
- [3/3] add entry toMAINTAINERS* since v1
- [2/3] fix parens inNUMONYX_V_ACTIMB_165define
- [3/3] add extra space after first&ctrl_basein fileigep0020.c
- [3/3] add a space after the 57600 comma in fileigep0020.h
- [3/3] removeCONFIG_SYS_ARM_WITHOUT_RELOCundefQuoted 14 lines
$ git diff --stat origin/master MAINTAINERS | 4 + MAKEALL | 1 + arch/arm/include/asm/arch-omap3/mem.h | 43 ++++++ board/isee/igep0020/Makefile | 49 +++++++ board/isee/igep0020/config.mk | 33 +++++ board/isee/igep0020/igep0020.c | 129 +++++++++++++++++++ board/isee/igep0020/igep0020.h | 156 ++++++++++++++++++++++ boards.cfg | 1 + drivers/mtd/onenand/onenand_base.c | 1 + include/configs/igep0020.h | 228 +++++++++++++++++++++++++++++++++ include/linux/mtd/onenand.h | 1 + 11 files changed, 646 insertions(+), 0 deletions(-)
Quoted 4 lines
Enric,
Not all of your patches are applying to the latest tree. Can you please rebase and send updated patches. Best would be to rebase with u-boot-ti.
Is ok. I don't need you to send updated patches.
I have rebased and fixed them myself. You can take a look at.
http://git.denx.de/u-boot.git/?p=u-boot/u-boot-ti.git;a=summary
I am working through some more sets of patches. After that I will send Wolfgang a pull request.
Thanks,
Sandeep