drivers: mtd: spi-nor: Add flash property for mt25qu512a and mt35xu02g
Subsystems (2)
PATCH v2 1/1 drivers: mtd: spi-nor: Add flash property for mt25qu512a and mt35xu02g
From: Ashish Kumar <[email protected]>
mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of extended jedec ID, initial JEDEC id is same as that of n25q512a.In order to avoid any confussion with respect to name new entry is added.
This flash is tested for Single I/O mode on LS1046FRWY although it does support QUAD I/O.
mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O and has been tested on LS1028ARDB
Signed-off-by Kuldeep Singh <[email protected]>
Signed-off-by Ashish Kumar <[email protected]>
---
V2:
Re-work based on review comments from Vignesh R
drivers/mtd/spi-nor/spi-nor.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/mtd/spi-nor/spi-nor.c +2 -0
@@ -1880,6 +1880,7 @@ static const struct flash_info spi_nor_ids[] = { { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, /* Micron */
@@ -1888,6 +1889,7 @@ static const struct flash_info spi_nor_ids[] = {SECT_4K |USE_FSR |SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, + { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },/* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
Signature · 1 line
2.7.4