drivers: mtd: spi: Add flash property for Micron mt25qu512a
PATCH v3 1/1 drivers: mtd: spi: Add flash property for Micron mt25qu512a
mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of extended jedec ID, initial JEDEC id is same as that of n25q512a.In order to avoid any confussion with respect to name new entry is added.
This flash is tested for Single I/O mode on LS1046FRWY although it also support QUAD I/O.
---
v3:
1. Add version info, rebase to top
v2:
2. Adding more description in commit msg
drivers/mtd/spi/spi-nor-ids.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/mtd/spi/spi-nor-ids.c +2 -0
@@ -163,6 +163,8 @@ const struct flash_info spi_nor_ids[] = { { INFO("n25q128a13", 0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, { INFO("n25q256a", 0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { INFO6("mt25qu512a", 0x20bb20, 0x104400, 64 * 1024, 1024, + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
Signature · 1 line
2.7.4
PATCH v3 1/1 drivers: mtd: spi: Add flash property for Micron mt25qu512a
Quoted 11 lines · Ashish Kumar
mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of extended jedec ID, initial JEDEC id is same as that of n25q512a.In order to avoid any confussion with respect to name new entry is added.
This flash is tested for Single I/O mode on LS1046FRWY although it also support QUAD I/O.
Signed-off-by Ashish Kumar <[email protected]>---
Applied to u-boot-spi/master