mtd: spi-nor: Add flash property for mt35xu02g
Subsystems (2)
PATCH v4 1/1 mtd: spi-nor: Add flash property for mt35xu02g
mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O and it has been tested on LS1028ARDB
---
v4:
split into seperate patch
v3:
v2:
did not exist
drivers/mtd/spi-nor/spi-nor.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/mtd/spi-nor/spi-nor.c +3 -0
@@ -1899,6 +1899,9 @@ static const struct flash_info spi_nor_ids[] = {SECT_4K |USE_FSR |SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, + { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048, +SECT_4K |USE_FSR |SPI_NOR_OCTAL_READ | + SPI_NOR_4B_OPCODES) },/* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
Signature · 1 line
2.17.1
PATCH v4 1/1 mtd: spi-nor: Rename n25q512a to mt25qu512a(n25q512a)
mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of operating frequency, JEDEC id is same as that of n25q512a.SPI_NOR_4B_OPCODES is appended to flash property.
This flash is tested for Single I/O and QUAD I/O mode on LS1046FRWY.
---
v4:
-Reword commit message as per review comments from tudor.
- split into seperate patch
v3:
-Reword commits msg
-rebase to top of mtd-linux spi-nor/next v2:
Incorporate review comments from Vignesh
drivers/mtd/spi-nor/spi-nor.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/mtd/spi-nor/spi-nor.c +12 -1
@@ -1876,7 +1876,18 @@ static const struct flash_info spi_nor_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + +/* Micron */ +/* n25q512a is rebraned as mt25qu512a after spin-off from ST, +* JEDEC id remains same. +* Operational frequency and Read Performance has increased +*/ + { +"mt25qu512a(n25q512a)" ,INFO (0x20bb20 ,0 ,64 *1024 ,1024 , +SECT_4K |USE_FSR |SPI_NOR_DUAL_READ | +SPI_NOR_QUAD_READ |SPI_NOR_4B_OPCODES ) + }, + { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
Signature · 1 line
2.17.1
Re: [PATCH v4] mtd: spi-nor: Rename n25q512a to mt25qu512a(n25q512a)
Quoted 9 lines · Ashish Kumar
External E-Mail
mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of operating frequency, JEDEC id is same as that of n25q512a.
SPI_NOR_4B_OPCODESis appended to flash property.
This flash is tested for Single I/O and QUAD I/O mode on LS1046FRWY.
Quoted 4 lines
Signed-off-by Kuldeep Singh <[email protected]>Signed-off-by Ashish Kumar <[email protected]>Reviewed-by Vignesh Raghavendra <[email protected]>
Renamed entry to "mt25qu512a (n25q512a)", reworded commit message, ordered entry by size, dropped comment as it looked redundant and
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git,
spi-nor/next branch.
Thanks,
ta
Quoted 16 lines · Ashish Kumar
External E-Mail
mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O and it has been tested on LS1028ARDB
Signed-off-by Kuldeep Singh <[email protected]>Signed-off-by Ashish Kumar <[email protected]>Reviewed-by Vignesh Raghavendra <[email protected]>---
v4:
split into seperate patch
v3:
v2:
did not exist
Quoted 3 lines
drivers/mtd/spi-nor/spi-nor.c | 3 +++ 1 file changed, 3 insertions(+)
Reworded commit message and
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git,
spi-nor/next branch.
Thanks,
ta