Skip to contentSkip to conversation

mtd: spi-nor: Add flash property for mt35xu02g

PATCH In review Ashish Kumar 2 participants 4 messages Aug 29, 2019 – Aug 30, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 mtd: spi-nor: Add flash property for mt35xu02g

mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O and it has been tested on LS1028ARDB

---
v4:
split into seperate patch
v3:
v2:
did not exist

 drivers/mtd/spi-nor/spi-nor.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mtd/spi-nor/spi-nor.c +3 -0
index b585f3fee4f0..409e81153525 100644
@@ -1899,6 +1899,9 @@ static const struct flash_info spi_nor_ids[] = {
 			SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
 			SPI_NOR_4B_OPCODES)
 	},
+	{ "mt35xu02g",  INFO(0x2c5b1c, 0, 128 * 1024, 2048,
+			SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
+			SPI_NOR_4B_OPCODES) },
 
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
Signature · 1 line
2.17.1
#1 lore raw

PATCH v4 1/1 mtd: spi-nor: Rename n25q512a to mt25qu512a(n25q512a)

mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of operating frequency, JEDEC id is same as that of n25q512a.
SPI_NOR_4B_OPCODES is appended to flash property.
This flash is tested for Single I/O and QUAD I/O mode on LS1046FRWY.

---
v4:
-Reword commit message as per review comments from tudor.
- split into seperate patch
v3:
-Reword commits msg
-rebase to top of mtd-linux spi-nor/next v2:
Incorporate review comments from Vignesh

 drivers/mtd/spi-nor/spi-nor.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/mtd/spi-nor/spi-nor.c +12 -1
index 73172d7f512b..b585f3fee4f0 100644
@@ -1876,7 +1876,18 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+
+	/* Micron */
+	/* n25q512a is rebraned as mt25qu512a after spin-off from ST,
+	 * JEDEC id remains same.
+	 * Operational frequency and Read Performance has increased
+	 */
+	{
+		"mt25qu512a(n25q512a)", INFO(0x20bb20, 0, 64 * 1024, 1024,
+			SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+			SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES)
+	},
+
 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
Signature · 1 line
2.17.1
#2 lore raw

Re: [PATCH v4] mtd: spi-nor: Rename n25q512a to mt25qu512a(n25q512a)

Quoted 9 lines · Ashish Kumar

External E-Mail

mt25qu512a is rebranded after its spinoff from STM, so it is different only in term of operating frequency, JEDEC id is same as that of n25q512a.
SPI_NOR_4B_OPCODES is appended to flash property.
This flash is tested for Single I/O and QUAD I/O mode on LS1046FRWY.

Quoted 4 lines

Renamed entry to "mt25qu512a (n25q512a)", reworded commit message, ordered entry by size, dropped comment as it looked redundant and
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git,
spi-nor/next branch.

Thanks,
ta

#3 lore raw
In reply to Ashish Kumar
Quoted 16 lines · Ashish Kumar

External E-Mail

mt35xu02g is Octal flash supporting Single I/O and QCTAL I/O and it has been tested on LS1028ARDB

---
v4:
split into seperate patch
v3:
v2:
did not exist

Quoted 3 lines
 drivers/mtd/spi-nor/spi-nor.c | 3 +++
 1 file changed, 3 insertions(+)

Reworded commit message and
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git,
spi-nor/next branch.

Thanks,
ta