Re-introduce TX FIFO resize for larger EP bursting

Changes in V11:
- Added a DWC3 controller revision check to use a different calculation, based on Ferry's testing.
- Removed descriptor loop in configfs, and utilize the fact that the ep->claimed parameter is still valid as ep_autoconf_reset() isn't called at the time of check_config()
- Fix compilation errors if CONFIG_OF is not defined
- Removed patch to add stubs for of_add_property()

Changes in V10:
- Fixed compilation errors in config where OF is not used (error due to unknown symbol for of_add_property()). Add of_add_property() stub.
- Fixed compilation warning for incorrect argument being passed to dwc3_mdwidth

Changes in V9:
- Fixed incorrect patch in series. Removed changes in DTSI, as dwc3-qcom will add the property by default from the kernel.

Changes in V8:
- Rebased to usb-testing
- Using devm_kzalloc for adding txfifo property in dwc3-qcom
- Removed DWC3 QCOM ACPI property for enabling the txfifo resize

Changes in V7:
- Added a new property tx-fifo-max-num for limiting how much fifo space the resizing logic can allocate for endpoints with large burst values. This can differ across platforms, and tie in closely with overall system latency.
- Added recommended checks for DWC32.
- Added changes to set the tx-fifo-resize property from dwc3-qcom by default instead of modifying the current DTSI files.
- Added comments on all APIs/variables introduced.
- Updated the DWC3 YAML to include a better description of the tx-fifo-resize property and added an entry for tx-fifo-max-num.

Changes in V6:
- Rebased patches to usb-testing.
- Renamed to PATCH series instead of RFC.
- Checking for fs_descriptors instead of ss_descriptors for determining the endpoint count for a particular configuration.
- Re-ordered patch series to fix patch dependencies.

Changes in V5:
- Added check_config() logic, which is used to communicate the number of EPs used in a particular configuration. Based on this, the DWC3 gadget driver has the ability to know the maximum number of eps utilized in all configs. This helps reduce unnecessary allocation to unused eps, and will catch fifo allocation issues at bind() time.
- Fixed variable declaration to single line per variable, and reverse xmas.
- Created a helper for fifo clearing, which is used by ep0.c

Changes in V4:
- Removed struct dwc3* as an argument for dwc3_gadget_resize_tx_fifos()
- Removed WARN_ON(1) in case we run out of fifo space

Changes in V3:
- Removed "Reviewed-by" tags
- Renamed series back to RFC
- Modified logic to ensure that fifo_size is reset if we pass the minimum threshold. Tested with binding multiple FDs requesting 6 FIFOs.

Changes in V2:
- Modified TXFIFO resizing logic to ensure that each EP is reserved a FIFO.
- Removed dev_dbg() prints and fixed typos from patches
- Added some more description on the dt-bindings commit message

Currently, there is no functionality to allow for resizing the TXFIFOs, and relying on the HW default setting for the TXFIFO depth. In most cases, the HW default is probably sufficient, but for USB compositions that contain multiple functions that require EP bursting, the default settings might not be enough. Also to note, the current SW will assign an EP to a function driver w/o checking to see if the TXFIFO size for that particular EP is large enough. (this is a problem if there are multiple HW defined values for the TXFIFO size)

It is mentioned in the SNPS databook that a minimum of TX FIFO depth = 3 is required for an EP that supports bursting. Otherwise, there may be frequent occurences of bursts ending. For high bandwidth functions, such as data tethering (protocols that support data aggregation), mass storage, and media transfer protocol (over FFS), the bMaxBurst value can be large, and a bigger TXFIFO depth may prove to be beneficial in terms of USB throughput. (which can be associated to system access latency, etc...) It allows for a more consistent burst of traffic, w/o any interruptions, as data is readily available in the FIFO.

With testing done using the mass storage function driver, the results show that with a larger TXFIFO depth, the bandwidth increased significantly.

Test Parameters:
- Platform: Qualcomm SM8150
- bMaxBurst = 6
- USB req size = 256kB
- Num of USB reqs = 16
- USB Speed = Super-Speed
- Function Driver: Mass Storage (w/ ramdisk)
- Test Application: CrystalDiskMark

Results:

TXFIFO Depth = 3 max packets

Test Case | Data Size | AVG tput (in MB/s)
-------------------------------------------

Sequential|1 GB x     | 
Read      |9 loops    | 193.60
	  |           | 195.86
          |           | 184.77
          |           | 193.60

-------------------------------------------

TXFIFO Depth = 6 max packets

Test Case | Data Size | AVG tput (in MB/s)
-------------------------------------------

Sequential|1 GB x     | 
Read      |9 loops    | 287.35
	  |           | 304.94
          |           | 289.64
          |           | 293.61

-------------------------------------------

Wesley Cheng (5):
usb: gadget: udc: core: Introduce check_config to verify USB
configuration
usb: gadget: configfs: Check USB configuration before adding
usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default
dt-bindings: usb: dwc3: Update dwc3 TX fifo properties

 .../devicetree/bindings/usb/snps,dwc3.yaml         |  15 +-
 drivers/usb/dwc3/core.c                            |   9 +
 drivers/usb/dwc3/core.h                            |  15 ++
 drivers/usb/dwc3/dwc3-qcom.c                       |  21 ++
 drivers/usb/dwc3/ep0.c                             |   2 +
 drivers/usb/dwc3/gadget.c                          | 217 +++++++++++++++++++++
 drivers/usb/gadget/configfs.c                      |   4 +
 drivers/usb/gadget/udc/core.c                      |  25 +++
 include/linux/usb/gadget.h                         |   4 +
 9 files changed, 310 insertions(+), 2 deletions(-)

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Some UDCs may have constraints on how many high bandwidth endpoints it can support in a certain configuration. This API allows for the composite driver to pass down the total number of endpoints to the UDC so it can verify it has the required resources to support the configuration.

---
 drivers/usb/gadget/udc/core.c | 25 +++++++++++++++++++++++++
 include/linux/usb/gadget.h    |  4 ++++
 2 files changed, 29 insertions(+)

index b7f0b1e..f1f44a6 100644
@@ -1003,6 +1003,31 @@ int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
 }
 EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
 
+/**
+ * usb_gadget_check_config - checks if the UDC can support the number of eps
+ * @gadget: controller to check the USB configuration
+ * @ep_map: bitmap of endpoints being requested by a USB configuration
+ *
+ * Ensure that a UDC is able to support the number of endpoints within a USB
+ * configuration, and that there are no resource limitations to support all
+ * requested eps.
+ *
+ * Returns zero on success, else a negative errno.
+ */
+int usb_gadget_check_config(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->check_config)
+		goto out;
+
+	ret = gadget->ops->check_config(gadget);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_check_config);
+
 /* ------------------------------------------------------------------------- */
 
 static void usb_gadget_state_work(struct work_struct *work)

index 75c7538..776851e 100644
@@ -329,6 +329,7 @@ struct usb_gadget_ops {
 	struct usb_ep *(*match_ep)(struct usb_gadget *,
 			struct usb_endpoint_descriptor *,
 			struct usb_ss_ep_comp_descriptor *);
+	int	(*check_config)(struct usb_gadget *gadget);
 };
 
 /**

@@ -608,6 +609,7 @@ int usb_gadget_connect(struct usb_gadget *gadget);
 int usb_gadget_disconnect(struct usb_gadget *gadget);
 int usb_gadget_deactivate(struct usb_gadget *gadget);
 int usb_gadget_activate(struct usb_gadget *gadget);
+int usb_gadget_check_config(struct usb_gadget *gadget);
 #else
 static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
 { return 0; }

@@ -631,6 +633,8 @@ static inline int usb_gadget_deactivate(struct usb_gadget *gadget)
 { return 0; }
 static inline int usb_gadget_activate(struct usb_gadget *gadget)
 { return 0; }
+static inline int usb_gadget_check_config(struct usb_gadget *gadget)
+{ return 0; }
 #endif /* CONFIG_USB_GADGET */
 
 /*-------------------------------------------------------------------------*/

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Hi Greg,

Thanks for the feedback.

Fixed to "endpoints"

Removed the ep_map comment, as we've removed it from the arguments.

thanks for this suggestion.

The USB gadget will have ep_list, do we'll be looping through the endpoints that have been claimed to get the number of IN eps being used by a particular configuration.

Thanks
Wesley Cheng

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Ensure that the USB gadget is able to support the configuration being added based on the number of endpoints required from all interfaces. This is for accounting for any bandwidth or space limitations.

---
 drivers/usb/gadget/configfs.c | 4 ++++
 1 file changed, 4 insertions(+)

index 15a607c..f4c7c82 100644
@@ -1404,6 +1404,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
 				goto err_purge_funcs;
 			}
 		}
+		ret = usb_gadget_check_config(cdev->gadget);
+		if (ret)
+			goto err_purge_funcs;
+
 		usb_ep_autoconfig_reset(cdev->gadget);
 	}
 	if (cdev->use_os_string) {

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Some devices have USB compositions which may require multiple endpoints that support EP bursting. HW defined TX FIFO sizes may not always be sufficient for these compositions. By utilizing flexible TX FIFO allocation, this allows for endpoints to request the required FIFO depth to achieve higher bandwidth. With some higher bMaxBurst configurations, using a larger TX FIFO size results in better TX throughput.

By introducing the check_config() callback, the resizing logic can fetch the maximum number of endpoints used in the USB composition (can contain multiple configurations), which helps ensure that the resizing logic can fulfill the configuration(s), or return an error to the gadget layer otherwise during bind time.

---
 drivers/usb/dwc3/core.c   |   9 ++
 drivers/usb/dwc3/core.h   |  15 ++++
 drivers/usb/dwc3/ep0.c    |   2 +
 drivers/usb/dwc3/gadget.c | 217 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 243 insertions(+)

index e0a8e79..a7bcdb9d 100644
@@ -1267,6 +1267,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			rx_max_burst_prd;
 	u8			tx_thr_num_pkt_prd;
 	u8			tx_max_burst_prd;
+	u8			tx_fifo_resize_max_num;
 	const char		*usb_psy_name;
 	int			ret;
 

@@ -1282,6 +1283,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	 */
 	hird_threshold = 12;
 
+	tx_fifo_resize_max_num = 6;
+
 	dwc->maximum_speed = usb_get_maximum_speed(dev);
 	dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
 	dwc->dr_mode = usb_get_dr_mode(dev);

@@ -1325,6 +1328,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 				&tx_thr_num_pkt_prd);
 	device_property_read_u8(dev, "snps,tx-max-burst-prd",
 				&tx_max_burst_prd);
+	dwc->do_fifo_resize = device_property_read_bool(dev,
+							"tx-fifo-resize");
+	device_property_read_u8(dev, "tx-fifo-max-num",
+				&tx_fifo_resize_max_num);
 
 	dwc->disable_scramble_quirk = device_property_read_bool(dev,
 				"snps,disable_scramble_quirk");

@@ -1390,6 +1397,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	dwc->tx_max_burst_prd = tx_max_burst_prd;
 
 	dwc->imod_interval = 0;
+
+	dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;
 }
 
 /* check whether the core supports IMOD */

index dccdf13..dd985ba 100644
@@ -1023,6 +1023,7 @@ struct dwc3_scratchpad_array {
  * @rx_max_burst_prd: max periodic ESS receive burst size
  * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
  * @tx_max_burst_prd: max periodic ESS transmit burst size
+ * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
  * @hsphy_interface: "utmi" or "ulpi"
  * @connected: true when we're connected to a host, false otherwise
  * @delayed_status: true when gadget driver asks for delayed status

@@ -1079,6 +1080,11 @@ struct dwc3_scratchpad_array {
  * @dis_split_quirk: set to disable split boundary.
  * @imod_interval: set the interrupt moderation interval in 250ns
  *			increments or 0 to disable.
+ * @max_cfg_eps: current max number of IN eps used across all USB configs.
+ * @last_fifo_depth: last fifo depth used to determine next fifo ram start
+ *		     address.
+ * @num_ep_resized: carries the current number endpoints which have had its tx
+ *		    fifo resized.
  */
 struct dwc3 {
 	struct work_struct	drd_work;

@@ -1233,6 +1239,7 @@ struct dwc3 {
 	u8			rx_max_burst_prd;
 	u8			tx_thr_num_pkt_prd;
 	u8			tx_max_burst_prd;
+	u8			tx_fifo_resize_max_num;
 
 	const char		*hsphy_interface;
 

@@ -1246,6 +1253,7 @@ struct dwc3 {
 	unsigned		is_utmi_l1_suspend:1;
 	unsigned		is_fpga:1;
 	unsigned		pending_events:1;
+	unsigned		do_fifo_resize:1;
 	unsigned		pullups_connected:1;
 	unsigned		setup_packet_pending:1;
 	unsigned		three_stage_setup:1;

@@ -1281,6 +1289,10 @@ struct dwc3 {
 	unsigned		dis_split_quirk:1;
 
 	u16			imod_interval;
+
+	int			max_cfg_eps;
+	int			last_fifo_depth;
+	int			num_ep_resized;
 };
 
 #define INCRX_BURST_MODE 0

@@ -1512,6 +1524,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 		struct dwc3_gadget_ep_cmd_params *params);
 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
 		u32 param);
+void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
 { return 0; }

@@ -1531,6 +1544,8 @@ static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
 		int cmd, u32 param)
 { return 0; }
+static inline void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
+{ }
 #endif
 
 #if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)

index 3cd2942..d28d085 100644
@@ -619,6 +619,8 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		return -EINVAL;
 
 	case USB_STATE_ADDRESS:
+		dwc3_gadget_clear_tx_fifos(dwc);
+
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		/* if the cfg matches and the cfg is non zero */
 		if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

In order to take advantage of the TX fifo resizing logic, manually add these properties to the DWC3 child node by default. This will allow the DWC3 gadget to resize the TX fifos for the IN endpoints, which help with performance.

---
 drivers/usb/dwc3/dwc3-qcom.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

index 49e6ca9..cec4f4a 100644
@@ -640,6 +640,25 @@ static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_OF
+static void dwc3_qcom_add_dt_props(struct device *dev, struct device_node *np)
+{
+	struct property		*prop;
+	int ret;
+
+	prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
+	if (prop) {
+		prop->name = "tx-fifo-resize";
+		ret = of_add_property(np, prop);
+		if (ret < 0)
+			dev_info(dev, "unable to add tx-fifo-resize prop\n");
+	}
+}
+#else
+static void dwc3_qcom_add_dt_props(struct device *dev, struct device_node *np)
+{ }
+#endif
+
 static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 {
 	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);

@@ -653,6 +672,8 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	dwc3_qcom_add_dt_props(dev, dwc3_np);
+
 	ret = of_platform_populate(np, NULL, NULL, dev);
 	if (ret) {
 		dev_err(dev, "failed to register dwc3 core - %d\n", ret);

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Hi Greg,

We can remove it. If anything we can always check the sysfs if the property is present or not.

OK, will handle the case where we can't allocate memory for the property.

Thanks
Wesley Cheng

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Sorry for being vague. That message should be dev_err(), and not dev_info(), right?

And the case for when of_add_property() fails.

thanks,

greg k-h

Update the tx-fifo-resize property with a better description, while adding the tx-fifo-max-num, which is a new parameter allowing adjustments for the maximum number of packets the txfifo resizing logic can account for while resizing the endpoints.

---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

index 41416fb..078fb78 100644
@@ -289,10 +289,21 @@ properties:
     maximum: 16
 
   tx-fifo-resize:
-    description: Determines if the FIFO *has* to be reallocated
-    deprecated: true
+    description: Determines if the TX fifos can be dynamically resized depending
+      on the number of IN endpoints used and if bursting is supported.  This
+      may help improve bandwidth on platforms with higher system latencies, as
+      increased fifo space allows for the controller to prefetch data into its
+      internal memory.
     type: boolean
 
+  tx-fifo-max-num:
+    description: Specifies the max number of packets the txfifo resizing logic
+      can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
+      higher the number, the more fifo space the txfifo resizing logic will
+      allocate for that endpoint.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 3
+
   snps,incr-burst-type-adjustment:
     description:
       Value for INCR burst type of GSBUSCFG0 register, undefined length INCR

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Still breaks the build :(