Skip to contentSkip to conversation

ppc4xx: Add GDsys PowerPC 440 ETX board support.

PATCH Superseded Dirk Eibach 2 participants 2 messages Dec 9, 2008 – Jan 26, 2009 Kbuild

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v6 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.

Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.

---

Depends on [PATCH v3] ppc4xx: Improve DDR autodetect

More whitespace rework. checkpatch does not find tab after define. Grrr.

 MAINTAINERS                           |    1 +
 MAKEALL                               |    1 +
 Makefile                              |    3 +
 board/gdsys/gdppc440etx/Makefile      |   51 +++++
 board/gdsys/gdppc440etx/config.mk     |   44 +++++
 board/gdsys/gdppc440etx/gdppc440etx.c |  325 +++++++++++++++++++++++++++++++++
 board/gdsys/gdppc440etx/init.S        |   75 ++++++++
 board/gdsys/gdppc440etx/u-boot.lds    |  144 +++++++++++++++
 include/configs/gdppc440etx.h         |  194 ++++++++++++++++++++
 9 files changed, 838 insertions(+), 0 deletions(-)
 create mode 100644 board/gdsys/gdppc440etx/Makefile
 create mode 100644 board/gdsys/gdppc440etx/config.mk
 create mode 100644 board/gdsys/gdppc440etx/gdppc440etx.c
 create mode 100644 board/gdsys/gdppc440etx/init.S
 create mode 100644 board/gdsys/gdppc440etx/u-boot.lds
 create mode 100644 include/configs/gdppc440etx.h
MAINTAINERS +1 -0
index 127604b..b836263 100644
@@ -132,6 +132,7 @@ Jon Diekema <[email protected]>
 
 Dirk Eibach <[email protected]>
 
+	gdppc440etx	PPC440EP/GR
 	neo		PPC405EP
 
 Dave Ellis <[email protected]>
MAKEALL +1 -0
index dbed268..3789bb9 100755
@@ -188,6 +188,7 @@ LIST_4xx="		\
 	EXBITGEN	\
 	fx12mm		\
 	G2000		\
+	gdppc440etx	\
 	glacier		\
 	haleakala	\
 	haleakala_nand	\
Makefile +3 -0
index befb608..d77ab3a 100644
@@ -1315,6 +1315,9 @@ fx12mm_config: unconfig
 G2000_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
 
+gdppc440etx_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
+
 hcu4_config:	unconfig
 	@mkdir -p $(obj)board/netstal/common
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
board/gdsys/gdppc440etx/Makefile new file +51 -0

51 lines not on this page · raw message

board/gdsys/gdppc440etx/config.mk new file +44 -0

44 lines not on this page · raw message

board/gdsys/gdppc440etx/gdppc440etx.c new file +325 -0

325 lines not on this page · raw message

board/gdsys/gdppc440etx/init.S new file +75 -0

75 lines not on this page · raw message

board/gdsys/gdppc440etx/u-boot.lds new file +144 -0

144 lines not on this page · raw message

include/configs/gdppc440etx.h new file +194 -0

194 lines not on this page · raw message

Signature · 1 line
1.5.6.5
#1 lore raw

PATCH v6 1/1 ppc4xx: Add GDsys PowerPC 440 ETX board support.

Quoted 4 lines · Dirk Eibach

Board support for the Guntermann & Drunck PowerPC 440 ETX module. Based on the AMCC Yosemite board support by Stefan Roese.

Applied to u-boot/master. Thanks

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================