Add freescale S/PDIF CPU DAI and machine drivers
Subsystems (7)
v5 cover Add freescale S/PDIF CPU DAI and machine drivers
Changelog:v4->v5:
* Dropped rx/tx-clksrc-names DT bindings.
* Use standard clock binding instead to pass the clock source list.
* Update the compatible list by using "imx35", the first SoC that has spdif.v3->v4:
* Use regmap for CPU DAI driver.
* Use individual clock source for 32KHz, 44KHz, 48KHz playback.
* Determine clock source configuration from 'clocks' entry.
* Added imx53 to compatible list, merged imx6q and imx6dl in the list.
* Improve the algorism of reverse_bits().
* Dropped the unneeded clk_put().v2->v3:
* Removed a wrong tag from the commit of patch-1.v1->v2:
* Dropped one applied patch for spdif dummy codec drivers.
* Use generic DMA DT binding.
* Let spdif controller driver calculate the clock div.
* Added one optional clock source for spdif tx.
* Reivsed documentation accordingly.
Nicolin Chen (2):
ASoC: fsl: Add S/PDIF CPU DAI driver
ASoC: fsl: Add S/PDIF machine driver
.../devicetree/bindings/sound/fsl,spdif.txt | 76 ++ .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 + sound/soc/fsl/Kconfig | 14 + sound/soc/fsl/Makefile | 4 + sound/soc/fsl/fsl_spdif.c | 1336 ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 224 ++++ sound/soc/fsl/imx-spdif.c | 134 ++ 7 files changed, 1817 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h create mode 100644 sound/soc/fsl/imx-spdif.c
PATCH v5 1/2 ASoC: fsl: Add S/PDIF CPU DAI driver
This patch add S/PDIF controller driver for Freescale SoC.
--- .../devicetree/bindings/sound/fsl,spdif.txt | 76 ++ sound/soc/fsl/Kconfig | 3 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl_spdif.c | 1336 ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 224 ++++ 5 files changed, 1641 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +76 -0
@@ -0,0 +1,76 @@ +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Freescale S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + + - compatible : Compatible list, contains "fsl,<chip>-spdif". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + name type comments + "core" Required The core clock of spdif controller + + "rx" Optional Rx clock source for spdif record. + If absent, will use core clock. + + "tx" Optional Tx clock source for spdif playback. + If absent, will use core clock. + + "tx-32000" Optional Tx clock source for 32000Hz sample rate + playback. If absent, will use tx clock. + + "tx-44100" Optional Tx clock source for 44100Hz sample rate + playback. If absent, will use tx clock. + + "tx-48000" Optional Tx clock source for 48000Hz sample rate + playback. If absent, will use tx clock. + + "src<0-7>" Optional Clock source list for tx and rx clock + to look up their clock source indexes. + This clock list should be identical to + the list of TxClk_Source bit value of + register SPDIF_STC. If absent or failed + to look up, tx and rx clock would then + ignore the "rx", "tx" "tx-32000", + "tx-44100", "tx-48000" clock phandles + and select the core clock as default + tx and rx clock. + +Optional properties: + + - rx-clksrc-lock: This is a boolean property. If present, ClkSrc_Sel bit + of SPDIF_SRPC would be set a clock source that cares DPLL locked condition. + +Example: + +spdif: spdif@02004000 { + compatible = "fsl,imx6q-spdif", + "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + + clocks = <&clks 197>, <&clks 3>, <&clks 197>, + <&clks 107>, <&clks 118>, <&clks 62>, + <&clks 139>; + clock-names = "core", "src0", "src1", "src2", + "src4", "src5", "src6"; + rx-clksrc-lock; + + status = "okay"; +};
sound/soc/fsl/Kconfig +3 -0
@@ -1,6 +1,9 @@ config SND_SOC_FSL_SSI tristate +config SND_SOC_FSL_SPDIF + tristate + config SND_SOC_FSL_UTILS tristate
sound/soc/fsl/Makefile +2 -0
@@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o # Freescale PowerPC SSI/DMA Platform Support snd-soc-fsl-ssi-objs := fsl_ssi.o +snd-soc-fsl-spdif-objs := fsl_spdif.o snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-dma-objs := fsl_dma.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o +obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
sound/soc/fsl/fsl_spdif.c new file +1336 -0
1,336 lines not on this page · raw message
sound/soc/fsl/fsl_spdif.h new file +224 -0
224 lines not on this page · raw message
Signature · 1 line
1.7.1
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Hi Nicolin,
[Ccing DT bindings maintainers]
Quoted 62 lines · On Thursday 15 of August 2013 19:26:39 Nicolin Chen wrote:
This patch add S/PDIF controller driver for Freescale SoC.
Signed-off-by Nicolin Chen <[email protected]>--- .../devicetree/bindings/sound/fsl,spdif.txt | 76 ++ sound/soc/fsl/Kconfig | 3 + sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl_spdif.c | 1336 ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 224 ++++ 5 files changed, 1641 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h(quoted diff) +0
-0
b/Documentation/devicetree/bindings/sound/fsl,spdif.txtnew file mode 100644
index 0000000..301b827Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +3
-0@@ -0,0 +1,76 @@ +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Freescale S/PDIF audio block is a stereo transceiver that allowsthe +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable.
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +35
-0+ +Required properties: + + - compatible : Compatible list, contains "fsl,<chip>-spdif". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + name type comments + "core" Required The core clock of spdif controller + + "rx" Optional Rx clock source for spdif record. + If absent, will use core clock. + + "tx" Optional Tx clock source for spdif playback. + If absent, will use core clock. + + "tx-32000" Optional Tx clock source for 32000Hz sample rate + playback. If absent, will use tx clock. + + "tx-44100" Optional Tx clock source for 44100Hz sample rate + playback. If absent, will use tx clock. + + "tx-48000" Optional Tx clock source for 48000Hz sample rate + playback. If absent, will use tx clock. +
Documentation/devicetree/bindings/sound/fsl,spdif.txt line 50
Quoted 10 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +10
-0+ "src<0-7>" Optional Clock source list for tx and rx clock + to look up their clock source indexes. + This clock list should be identical to + the list of TxClk_Source bit value of + register SPDIF_STC. If absent or failed + to look up, tx and rx clock would then + ignore the "rx", "tx" "tx-32000", + "tx-44100", "tx-48000" clock phandles + and select the core clock as default + tx and rx clock.
I suspect a little abuse of clocks property here. From the description of "core" and "src<0-7>" clocks I assume that the IP can have up to 9 clock inputs - core clock and up to 8 extra source clocks. Is it correct?
If yes, this makes the "tx", "rx" and "tx-*" clocks describe configuration, not hardware. IMHO it should be up to the driver which source clocks to use for tx and rx channels and for each sampling rate.
Quoted 5 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +3
-0+Optional properties: + + - rx-clksrc-lock: This is a boolean property. If present, ClkSrc_Selbit + of
SPDIF_SRPCwould be set a clock source that cares DPLL locked condition. +
This again looks like software configuration, not hardware description. Could you elaborate a bit more on meaning of this property?
Quoted 1,200 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +20
-0+Example: + +spdif: spdif@02004000 { + compatible = "fsl,imx6q-spdif", + "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <0 52 0x04>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + + clocks = <&clks 197>, <&clks 3>, <&clks 197>, + <&clks 107>, <&clks 118>, <&clks 62>, + <&clks 139>; + clock-names = "core", "src0", "src1", "src2", + "src4", "src5", "src6"; + rx-clksrc-lock; + + status = "okay"; +};sound/soc/fsl/Kconfig +3
-0@@ -1,6 +1,9 @@ config SND_SOC_FSL_SSI tristate +config SND_SOC_FSL_SPDIF + tristate + config SND_SOC_FSL_UTILS tristatesound/soc/fsl/Makefile +0
-0@@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) +=snd-soc-p1022-rdk.o
# Freescale PowerPC SSI/DMA Platform Support
snd-soc-fsl-ssi-objs := fsl_ssi.osound/soc/fsl/Makefile +2
-0+snd-soc-fsl-spdif-objs := fsl_spdif.o snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-dma-objs := fsl_dma.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o +obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.osound/soc/fsl/fsl_spdif.c new file +11
-0@@ -0,0 +1,1336 @@ +/* +* Freescale S/PDIF ALSA SoC Digital Audio Interface (DAI) driver +* +* Copyright (C) 2013 Freescale Semiconductor, Inc. +* +* Based on stmp3xxx_spdif_dai.c +* Vladimir Barinov <[email protected]> +* Copyright 2008 SigmaTel, Inc +* Copyright 2008 Embedded Alley Solutions, Inc +* +* This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied.
+ */sound/soc/fsl/fsl_spdif.c new file +21
-0+ +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include <linux/regmap.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> + +#include <sound/asoundef.h> +#include <sound/soc.h> +#include <sound/dmaengine_pcm.h> + +#include "fsl_spdif.h" +#include "imx-pcm.h" + +#define FSL_SPDIF_TXFIFO_WML 0x8 +#define FSL_SPDIF_RXFIFO_WML 0x8 + +#define INTR_FOR_PLAYBACK (INT_TXFIFO_RESYNC) +#define INTR_FOR_CAPTURE (INT_SYM_ERR | INT_BIT_ERR | INT_URX_FUL |INT_URX_OV|\ +
INT_QRX_FUL|INT_QRX_OV|INT_UQ_SYNC|INT_UQ_ERR|\sound/soc/fsl/fsl_spdif.c new file +3
-0+ INT_RXFIFO_RESYNC | INT_LOSS_LOCK | INT_DPLL_LOCKED) + +/* Index list for the values that has if (DPLL Locked) in ClkSrc_Sel bit of SRPC */ +static u8 srpc_dpll_locked[] = {
0x0,0x1,0x2,0x3,0x4,0xa,0xb, }; +#defineSRPC_NODPLL_START10x5sound/soc/fsl/fsl_spdif.c new file +101
-0+#define SRPC_NODPLL_START2 0xc + +/* +* SPDIF control structure +* Defines channel status, subcode and Q sub +*/ +struct spdif_mixer_control { +/* spinlock to access control data */ +spinlock_t ctl_lock; + +/* IEC958 channel tx status bit */ +unsigned char ch_status[4 ]; + +/* User bits */ +unsigned char subcode[2 *SPDIF_UBITS_SIZE ]; + +/* Q subcode part of user bits */ +unsigned char qsub[2 *SPDIF_QSUB_SIZE ]; + +/* buffer ptrs for writer */ +u32 upos; +u32 qpos; + +/* ready buffer index of the two buffers */ +u32 ready_buf; +}; + +struct fsl_spdif_priv { +struct spdif_mixer_control fsl_spdif_control; +struct snd_soc_dai_driver cpu_dai_drv; +struct platform_device *pdev; +struct regmap *regmap; +atomic_t dpll_locked; +u32 irq; +s8 rxclk_src; +s8 txclk_src[SPDIF_TXRATE_MAX ]; +u8 txclk_div[SPDIF_TXRATE_MAX ]; +struct clk *txclk[SPDIF_TXRATE_MAX ]; +struct clk *txclk_main; +struct clk *rxclk; +struct clk *coreclk; +struct snd_dmaengine_dai_dma_data dma_params_tx; +struct snd_dmaengine_dai_dma_data dma_params_rx; + +/* The name space will be allocated dynamically */ +char name[0 ]; +}; + + +#ifdef DEBUG +static void dumpregs (struct fsl_spdif_priv *spdif_priv) +{ +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; +u32 val, i; +int ret; + +/* Valid address set of SPDIF is {[0x0-0x38], 0x44, 0x50} */ +for (i =0 ; i <=REG_SPDIF_STC ; i +=4 ) { + ret =regmap_read (regmap,REG_SPDIF_SCR + i, &val); +if (!ret) +dev_dbg (&pdev->dev,"REG 0x%02x = 0x%06x\n" , i, val); + } +} +#else +static void dumpregs (struct fsl_spdif_priv *spdif_priv) {} +#endif + + +/* DPLL locked and lock loss interrupt handler */ +static void spdif_irq_dpll_lock (struct fsl_spdif_priv *spdif_priv) +{ +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; +u32 locked; + +regmap_read (regmap,REG_SPDIF_SRPC , &locked); + locked &=SRPC_DPLL_LOCKED ; + +dev_dbg (&pdev->dev,"isr: Rx dpll %s \n" , + locked ?"locked" :"loss lock" ); + +atomic_set (&spdif_priv->dpll_locked, locked ?1 :0 ); +} + +/* Receiver found illegal symbol interrupt handler */ +static void spdif_irq_sym_error (struct fsl_spdif_priv *spdif_priv) +{ +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; + +dev_dbg (&pdev->dev,"isr: receiver found illegal symbol\n" ); + +if (!atomic_read (&spdif_priv->dpll_locked)) { +/* dpll unlocked seems no audio stream */ +regmap_update_bits (regmap,REG_SPDIF_SIE ,INT_SYM_ERR ,0 ); + } +} + +/* U/Q Channel receive register full */ +static void spdif_irq_uqrx_full(struct fsl_spdif_priv *spdif_priv, charname) +{
sound/soc/fsl/fsl_spdif.c new file +185
-0+struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; +u32 *pos, size, val, reg; + +switch (name) { +case 'U' : + pos = &ctrl->upos; + size =SPDIF_UBITS_SIZE ; + reg =REG_SPDIF_SRU ; +break ; +case 'Q' : + pos = &ctrl->qpos; + size =SPDIF_QSUB_SIZE ; + reg =REG_SPDIF_SRQ ; +break ; +default : +return ; + } + +dev_dbg (&pdev->dev,"isr: %c Channel receive register full\n" , name); + +if (*pos >= size *2 ) { + *pos =0 ; + }else if (unlikely ((*pos % size) +3 > size)) { +dev_err (&pdev->dev,"User bit receivce buffer overflow\n" ); +return ; + } + +regmap_read (regmap, reg, &val); + ctrl->subcode[*pos++] = val >>16 ; + ctrl->subcode[*pos++] = val >>8 ; + ctrl->subcode[*pos++] = val; +} + +/* U/Q Channel sync found */ +static void spdif_irq_uq_sync (struct fsl_spdif_priv *spdif_priv) +{ +struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; +struct platform_device *pdev = spdif_priv->pdev; + +dev_dbg (&pdev->dev,"isr: U/Q Channel sync found\n" ); + +/* U/Q buffer reset */ +if (ctrl->qpos ==0 ) +return ; + +/* set ready to this buffer */ + ctrl->ready_buf = (ctrl->qpos -1 ) /SPDIF_QSUB_SIZE +1 ; +} + +/* U/Q Channel framing error */ +static void spdif_irq_uq_err (struct fsl_spdif_priv *spdif_priv) +{ +struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; +u32 val; + +dev_dbg (&pdev->dev,"isr: U/Q Channel framing error\n" ); + +/* read U/Q data and do buffer reset */ +regmap_read (regmap,REG_SPDIF_SRU , &val); +regmap_read (regmap,REG_SPDIF_SRQ , &val); + +/* drop this U/Q buffer */ + ctrl->ready_buf =0 ; + ctrl->upos =0 ; + ctrl->qpos =0 ; +} + +/* Get spdif interrupt status and clear the interrupt */ +static u32 spdif_intr_status_clear (struct fsl_spdif_priv *spdif_priv) +{ +struct regmap *regmap = spdif_priv->regmap; +u32 val, val2; + +regmap_read (regmap,REG_SPDIF_SIS , &val); +regmap_read (regmap,REG_SPDIF_SIE , &val2); + +regmap_write (regmap,REG_SPDIF_SIC , val & val2); + +return val; +} + +static irqreturn_t spdif_isr (int irq,void *devid) +{ +struct fsl_spdif_priv *spdif_priv = (struct fsl_spdif_priv *)devid; +struct platform_device *pdev = spdif_priv->pdev; +u32 sis; + + sis =spdif_intr_status_clear (spdif_priv); + +if (sis &INT_DPLL_LOCKED ) +spdif_irq_dpll_lock (spdif_priv); + +if (sis &INT_TXFIFO_UNOV ) +dev_dbg (&pdev->dev,"isr: Tx FIFO under/overrun\n" ); + +if (sis &INT_TXFIFO_RESYNC ) +dev_dbg (&pdev->dev,"isr: Tx FIFO resync\n" ); + +if (sis &INT_CNEW ) +dev_dbg (&pdev->dev,"isr: cstatus new\n" ); + +if (sis &INT_VAL_NOGOOD ) +dev_dbg (&pdev->dev,"isr: validity flag no good\n" ); + +if (sis &INT_SYM_ERR ) +spdif_irq_sym_error (spdif_priv); + +if (sis &INT_BIT_ERR ) +dev_dbg (&pdev->dev,"isr: receiver found parity bit error\n" ); + +if (sis &INT_URX_FUL ) +spdif_irq_uqrx_full (spdif_priv,'U' ); + +if (sis &INT_URX_OV ) +dev_dbg (&pdev->dev,"isr: U Channel receive register overrun\n" ); + +if (sis &INT_QRX_FUL ) +spdif_irq_uqrx_full (spdif_priv,'Q' ); + +if (sis &INT_QRX_OV ) +dev_dbg (&pdev->dev,"isr: Q Channel receive register overrun\n" ); + +if (sis &INT_UQ_SYNC ) +spdif_irq_uq_sync (spdif_priv); + +if (sis &INT_UQ_ERR ) +spdif_irq_uq_err (spdif_priv); + +if (sis &INT_RXFIFO_UNOV ) +dev_dbg (&pdev->dev,"isr: Rx FIFO under/overrun\n" ); + +if (sis &INT_RXFIFO_RESYNC ) +dev_dbg (&pdev->dev,"isr: Rx FIFO resync\n" ); + +if (sis &INT_LOSS_LOCK ) +spdif_irq_dpll_lock (spdif_priv); + +/* FIXME: Write Tx FIFO to clear TxEm */ +if (sis &INT_TX_EM ) +dev_dbg (&pdev->dev,"isr: Tx FIFO empty\n" ); + +/* FIXME: Read Rx FIFO to clear RxFIFOFul */ +if (sis &INT_RXFIFO_FUL ) +dev_dbg (&pdev->dev,"isr: Rx FIFO full\n" ); + +return IRQ_HANDLED ; +} + +static void spdif_softreset (struct fsl_spdif_priv *spdif_priv) +{ +struct regmap *regmap = spdif_priv->regmap; +u32 val, cycle =1000 ; + +regmap_write (regmap,REG_SPDIF_SCR ,SCR_SOFT_RESET ); +regcache_sync (regmap); + +/* RESET bit would be cleared after finishing its reset procedure */ +do { +regmap_read (regmap,REG_SPDIF_SCR , &val); + }while ((val &SCR_SOFT_RESET ) && cycle--); +} + +static void spdif_set_cstatus (struct spdif_mixer_control *ctrl, +u8 mask,u8 cstatus) +{ + ctrl->ch_status[3 ] &= ~mask; + ctrl->ch_status[3 ] |= cstatus & mask; +} + +static u8 reverse_bits (u8 input) +{ +u8 tmp = input; + + tmp = ((tmp &0b10101010 ) >>1 ) | ((tmp <<1 ) &0b10101010 ); + tmp = ((tmp &0b11001100 ) >>2 ) | ((tmp <<2 ) &0b11001100 ); + tmp = ((tmp &0b11110000 ) >>4 ) | ((tmp <<4 ) &0b11110000 ); + +return tmp; +} + +static void spdif_write_channel_status(struct fsl_spdif_priv
*spdif_priv) +{sound/soc/fsl/fsl_spdif.c new file +50
-0+struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; +u32 ch_status; + + ch_status = (reverse_bits (ctrl->ch_status[0 ]) <<16 ) | + (reverse_bits (ctrl->ch_status[1 ]) <<8 ) | +reverse_bits (ctrl->ch_status[2 ]); +regmap_write (regmap,REG_SPDIF_STCSCH , ch_status); + +dev_dbg (&pdev->dev,"STCSCH: 0x%06x\n" , ch_status); + + ch_status =reverse_bits (ctrl->ch_status[3 ]) <<16 ; +regmap_write (regmap,REG_SPDIF_STCSCL , ch_status); + +dev_dbg (&pdev->dev,"STCSCL: 0x%06x\n" , ch_status); +} + +/* Set SPDIF PhaseConfig register for rx clock */ +static int spdif_set_rx_clksrc (struct fsl_spdif_priv *spdif_priv, +enum spdif_gainsel gainsel,int dpll_locked) +{ +enum spdif_rxclk_src clksrc = spdif_priv->rxclk_src; +struct regmap *regmap = spdif_priv->regmap; + +if (clksrc >=SRPC_CLKSRC_MAX || gainsel >=GAINSEL_MULTI_MAX ) +return -EINVAL ; + +regmap_update_bits (regmap,REG_SPDIF_SRPC , +SRPC_CLKSRC_SEL_MASK |SRPC_GAINSEL_MASK , +SRPC_CLKSRC_SEL_SET (clksrc) |SRPC_GAINSEL_SET (gainsel)); + +return 0 ; +} + +static int spdif_clk_set_rate (struct clk *clk,unsigned long rate) +{ +unsigned long rate_actual; + + rate_actual =clk_round_rate (clk, rate); +clk_set_rate (clk, rate_actual); + +return 0 ; +} + +static int spdif_set_sample_rate (struct snd_pcm_substream *substream, +int sample_rate) +{ +struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv =
snd_soc_dai_get_drvdata(rtd->cpu_dai); + structspdif_mixer_control
*ctrl =&spdif_priv->fsl_spdif_control; + struct regmap *regmap =spdif_priv->regmap;sound/soc/fsl/fsl_spdif.c new file +39
-0+struct platform_device *pdev = spdif_priv->pdev; +unsigned long clk =-1 , div =1 , csfs =0 ; +u32 stc, mask, rate; + +switch (sample_rate) { +case 32000 : + rate =SPDIF_TXRATE_32000 ; + csfs =IEC958_AES3_CON_FS_32000 ; +break ; +case 44100 : + rate =SPDIF_TXRATE_44100 ; + csfs =IEC958_AES3_CON_FS_44100 ; +break ; +case 48000 : + rate =SPDIF_TXRATE_48000 ; + csfs =IEC958_AES3_CON_FS_48000 ; +break ; +default : +dev_err (&pdev->dev,"unsupported samplerate %d\n" , sample_rate); +return -EINVAL ; + } + + clk = spdif_priv->txclk_src[rate]; +if (clk <0 ) { +dev_err (&pdev->dev,"no defined %d clk src\n" , sample_rate); +return -EINVAL ; + } + + div = spdif_priv->txclk_div[rate]; +if (div ==0 ) { +dev_err (&pdev->dev,"tx clock source is dividing by zero\n" ); +return -EINVAL ; + } +/* +* The S/PDIF block needs a clock of 64 * fs * div. The S/PDIF block +* will divide by (div). So request 64 * fs * (div+1) which will +* get rounded. +*/ + spdif_clk_set_rate(spdif_priv->txclk[rate], 64 * sample_rate * (div +1)); +
sound/soc/fsl/fsl_spdif.c new file +11
-0+dev_dbg (&pdev->dev,"expected clock rate = %d\n" , + (int )(64 * sample_rate * div)); +dev_dbg (&pdev->dev,"acutal clock rate = %d\n" , + (int )clk_get_rate (spdif_priv->txclk[rate])); + +/* set fs field in consumer channel status */ +spdif_set_cstatus (ctrl,IEC958_AES3_CON_FS , csfs); + +/* select clock source and divisor */ + stc =STC_TXCLK_ALL_EN |STC_TXCLK_SRC_SET (clk) |STC_TXCLK_DIV (div); + mask = STC_TXCLK_ALL_EN_MASK | STC_TXCLK_SRC_MASK |
STC_TXCLK_DIV_MASK; + regmap_update_bits(regmap,REG_SPDIF_STC, mask,
stc);sound/soc/fsl/fsl_spdif.c new file +11
-0+ +dev_dbg (&pdev->dev,"set sample rate to %d\n" , sample_rate); + +return 0 ; +} + +int fsl_spdif_startup (struct snd_pcm_substream *substream, +struct snd_soc_dai *cpu_dai) +{ +struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv =
snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap =spdif_priv->regmap;sound/soc/fsl/fsl_spdif.c new file +38
-0+u32 scr, mask, i; + +/* Reset module and interrupts only for first initialization */ +if (!cpu_dai->active) { +spdif_softreset (spdif_priv); + +/* disable all the interrupts */ +regmap_update_bits (regmap,REG_SPDIF_SIE ,0xffffff ,0 ); + } + +if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK ) { + scr =SCR_TXFIFO_AUTOSYNC |SCR_TXFIFO_CTRL_NORMAL | +SCR_TXSEL_NORMAL |SCR_USRC_SEL_CHIP | +SCR_TXFIFO_FSEL_IF8 ; + mask =SCR_TXFIFO_AUTOSYNC_MASK |SCR_TXFIFO_CTRL_MASK | +SCR_TXSEL_MASK |SCR_USRC_SEL_MASK | +SCR_TXFIFO_FSEL_MASK ; +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) +clk_enable (spdif_priv->txclk[i]); + }else { + scr =SCR_RXFIFO_FSEL_IF8 |SCR_RXFIFO_AUTOSYNC ; + mask =SCR_RXFIFO_FSEL_MASK |SCR_RXFIFO_AUTOSYNC_MASK | +SCR_RXFIFO_CTL_MASK |SCR_RXFIFO_OFF_MASK ; +clk_enable (spdif_priv->rxclk); + } +regmap_update_bits (regmap,REG_SPDIF_SCR , mask, scr); + +/* Power up SPDIF module */ +regmap_update_bits (regmap,REG_SPDIF_SCR ,SCR_LOW_POWER ,0 ); + +return 0 ; +} + +static void fsl_spdif_shutdown (struct snd_pcm_substream *substream, +struct snd_soc_dai *cpu_dai) +{ +struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv =
snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap =spdif_priv->regmap;sound/soc/fsl/fsl_spdif.c new file +21
-0+u32 scr, mask, i; + +if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK ) { + scr =0 ; + mask =SCR_TXFIFO_AUTOSYNC_MASK |SCR_TXFIFO_CTRL_MASK | +SCR_TXSEL_MASK |SCR_USRC_SEL_MASK | +SCR_TXFIFO_FSEL_MASK ; +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) +clk_disable (spdif_priv->txclk[i]); + }else { + scr =SCR_RXFIFO_OFF |SCR_RXFIFO_CTL_ZERO ; + mask =SCR_RXFIFO_FSEL_MASK |SCR_RXFIFO_AUTOSYNC_MASK | +SCR_RXFIFO_CTL_MASK |SCR_RXFIFO_OFF_MASK ; +clk_disable (spdif_priv->rxclk); + } +regmap_update_bits (regmap,REG_SPDIF_SCR , mask, scr); + +/* Power down SPDIF module only if tx&rx are both inactive */ +if (!cpu_dai->active) { +spdif_intr_status_clear (spdif_priv); + regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER,
SCR_LOW_POWER); + }sound/soc/fsl/fsl_spdif.c new file +8
-0+} + +static int fsl_spdif_hw_params (struct snd_pcm_substream *substream, +struct snd_pcm_hw_params *params, +struct snd_soc_dai *dai) +{ +struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv =
snd_soc_dai_get_drvdata(rtd->cpu_dai); + structspdif_mixer_control
*ctrl =&spdif_priv->fsl_spdif_control; + structplatform_device*pdev
=spdif_priv->pdev;sound/soc/fsl/fsl_spdif.c new file +26
-0+u32 sample_rate =params_rate (params); +int ret =0 ; + +if (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK ) { + ret =spdif_set_sample_rate (substream, sample_rate); +if (ret) { +dev_err (&pdev->dev,"%s: set sample rate failed: %d\n" , + __func__, sample_rate); +return ret; + } +spdif_set_cstatus (ctrl,IEC958_AES3_CON_CLOCK , +IEC958_AES3_CON_CLOCK_1000PPM ); +spdif_write_channel_status (spdif_priv); + }else { +/* setup rx clock source */ + ret =spdif_set_rx_clksrc (spdif_priv,SPDIF_DEFAULT_GAINSEL ,1 ); + } + +return ret; +} + +static int fsl_spdif_trigger (struct snd_pcm_substream *substream, +int cmd,struct snd_soc_dai *dai) +{ +struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct fsl_spdif_priv *spdif_priv =
snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap =spdif_priv->regmap;sound/soc/fsl/fsl_spdif.c new file +153
-0+int is_playack = (substream->stream ==SNDRV_PCM_STREAM_PLAYBACK ); +u32 intr = is_playack ?INTR_FOR_PLAYBACK :INTR_FOR_CAPTURE ; +u32 dmaen = is_playack ?SCR_DMA_TX_EN :SCR_DMA_RX_EN ;; + +switch (cmd) { +case SNDRV_PCM_TRIGGER_START : +case SNDRV_PCM_TRIGGER_RESUME : +case SNDRV_PCM_TRIGGER_PAUSE_RELEASE : +regmap_update_bits (regmap,REG_SPDIF_SIE , intr, intr); +regmap_update_bits (regmap,REG_SPDIF_SCR , dmaen, dmaen); +dumpregs (spdif_priv); +break ; +case SNDRV_PCM_TRIGGER_STOP : +case SNDRV_PCM_TRIGGER_SUSPEND : +case SNDRV_PCM_TRIGGER_PAUSE_PUSH : +regmap_update_bits (regmap,REG_SPDIF_SCR , dmaen,0 ); +regmap_update_bits (regmap,REG_SPDIF_SIE , intr,0 ); +break ; +default : +return -EINVAL ; + } + +return 0 ; +} + +struct snd_soc_dai_ops fsl_spdif_dai_ops = { + .startup = fsl_spdif_startup, + .hw_params = fsl_spdif_hw_params, + .trigger = fsl_spdif_trigger, + .shutdown = fsl_spdif_shutdown, +}; + + +/* +* ============================================ +* FSL SPDIF IEC958 controller(mixer) functions +* +* Channel status get/put control +* User bit value get/put control +* Valid bit value get control +* DPLL lock status get control +* User bit sync mode selection control +* ============================================ +*/ + +static int fsl_spdif_info (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_info *uinfo) +{ + uinfo->type =SNDRV_CTL_ELEM_TYPE_IEC958 ; + uinfo->count =1 ; + +return 0 ; +} + +static int fsl_spdif_pb_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *uvalue) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + + uvalue->value.iec958.status[0 ] = ctrl->ch_status[0 ]; + uvalue->value.iec958.status[1 ] = ctrl->ch_status[1 ]; + uvalue->value.iec958.status[2 ] = ctrl->ch_status[2 ]; + uvalue->value.iec958.status[3 ] = ctrl->ch_status[3 ]; + +return 0 ; +} + +static int fsl_spdif_pb_put (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *uvalue) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; + + ctrl->ch_status[0 ] = uvalue->value.iec958.status[0 ]; + ctrl->ch_status[1 ] = uvalue->value.iec958.status[1 ]; + ctrl->ch_status[2 ] = uvalue->value.iec958.status[2 ]; + ctrl->ch_status[3 ] = uvalue->value.iec958.status[3 ]; + +spdif_write_channel_status (spdif_priv); + +return 0 ; +} + +/* Get channel status from SPDIF_RX_CCHAN register */ +static int fsl_spdif_capture_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct regmap *regmap = spdif_priv->regmap; +u32 cstatus, val; + +regmap_read (regmap,REG_SPDIF_SIS , &val); +if (!(val &INT_CNEW )) { +return -EAGAIN ; + } + +regmap_read (regmap,REG_SPDIF_SRCSH , &cstatus); + ucontrol->value.iec958.status[0 ] = (cstatus >>16 ) &0xFF ; + ucontrol->value.iec958.status[1 ] = (cstatus >>8 ) &0xFF ; + ucontrol->value.iec958.status[2 ] = cstatus &0xFF ; + +regmap_read (regmap,REG_SPDIF_SRCSL , &cstatus); + ucontrol->value.iec958.status[3 ] = (cstatus >>16 ) &0xFF ; + ucontrol->value.iec958.status[4 ] = (cstatus >>8 ) &0xFF ; + ucontrol->value.iec958.status[5 ] = cstatus &0xFF ; + +/* clear intr */ +regmap_write (regmap,REG_SPDIF_SIC ,INT_CNEW ); + +return 0 ; +} + +/* +* Get User bits (subcode) from chip value which readed out +* in UChannel register. +*/ +static int fsl_spdif_subcode_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; +unsigned long flags; +int ret =0 ; + +spin_lock_irqsave (&ctrl->ctl_lock, flags); +if (ctrl->ready_buf) { +int idx = (ctrl->ready_buf -1 ) *SPDIF_UBITS_SIZE ; +memcpy (&ucontrol->value.iec958.subcode[0 ], + &ctrl->subcode[idx],SPDIF_UBITS_SIZE ); + }else { + ret = -EAGAIN ; + } +spin_unlock_irqrestore (&ctrl->ctl_lock, flags); + +return ret; +} + +/* Q-subcode infomation. The byte size is SPDIF_UBITS_SIZE/8 */ +static int fsl_spdif_qinfo (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_info *uinfo) +{ + uinfo->type =SNDRV_CTL_ELEM_TYPE_BYTES ; + uinfo->count =SPDIF_QSUB_SIZE ; + +return 0 ; +} + +/* Get Q subcode from chip value which readed out in QChannel register */ +static int fsl_spdif_qget(struct
snd_kcontrol*kcontrol,sound/soc/fsl/fsl_spdif.c new file +242
-0+ struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; +unsigned long flags; +int ret =0 ; + +spin_lock_irqsave (&ctrl->ctl_lock, flags); +if (ctrl->ready_buf) { +int idx = (ctrl->ready_buf -1 ) *SPDIF_QSUB_SIZE ; +memcpy (&ucontrol->value.bytes.data[0 ], + &ctrl->qsub[idx],SPDIF_QSUB_SIZE ); + }else { + ret = -EAGAIN ; + } +spin_unlock_irqrestore (&ctrl->ctl_lock, flags); + +return ret; +} + +/* Valid bit infomation */ +static int fsl_spdif_vbit_info (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_info *uinfo) +{ + uinfo->type =SNDRV_CTL_ELEM_TYPE_BOOLEAN ; + uinfo->count =1 ; + uinfo->value.integer.min =0 ; + uinfo->value.integer.max =1 ; + +return 0 ; +} + +/* Get valid good bit from interrupt status register */ +static int fsl_spdif_vbit_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct regmap *regmap = spdif_priv->regmap; +u32 val; + + val =regmap_read (regmap,REG_SPDIF_SIS , &val); + ucontrol->value.integer.value[0 ] = (val &INT_VAL_NOGOOD ) !=0 ; +regmap_write (regmap,REG_SPDIF_SIC ,INT_VAL_NOGOOD ); + +return 0 ; +} + +/* DPLL lock infomation */ +static int fsl_spdif_rxrate_info (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_info *uinfo) +{ + uinfo->type =SNDRV_CTL_ELEM_TYPE_INTEGER ; + uinfo->count =1 ; + uinfo->value.integer.min =16000 ; + uinfo->value.integer.max =96000 ; + +return 0 ; +} + +static u32 gainsel_multi[GAINSEL_MULTI_MAX ] = { +24 ,16 ,12 ,8 ,6 ,4 ,3 , +}; + +/* Get RX data clock rate given the SPDIF bus_clk */ +static int spdif_get_rxclk_rate (struct fsl_spdif_priv *spdif_priv, +enum spdif_gainsel gainsel) +{ +struct regmap *regmap = spdif_priv->regmap; +struct platform_device *pdev = spdif_priv->pdev; +u64 tmpval64, busclk_freq =0 ; +u32 freqmeas, phaseconf; +enum spdif_rxclk_src clksrc; + +regmap_read (regmap,REG_SPDIF_SRFM , &freqmeas); +regmap_read (regmap,REG_SPDIF_SRPC , &phaseconf); + + clksrc = (phaseconf >>SRPC_CLKSRC_SEL_OFFSET ) &0xf ; +if (srpc_dpll_locked[clksrc] && (phaseconf &SRPC_DPLL_LOCKED )) { +/* get bus clock from system */ + busclk_freq =clk_get_rate (spdif_priv->rxclk); + } + +/* FreqMeas_CLK = (BUS_CLK * FreqMeas) / 2 ^ 10 / GAINSEL / 128 */ + tmpval64 = (u64 ) busclk_freq * freqmeas; +do_div (tmpval64, gainsel_multi[gainsel] *1024 ); +do_div (tmpval64,128 *1024 ); + +dev_dbg (&pdev->dev,"FreqMeas: %d\n" , (int )freqmeas); +dev_dbg (&pdev->dev,"BusclkFreq: %d\n" , (int )busclk_freq); +dev_dbg (&pdev->dev,"RxRate: %d\n" , (int )tmpval64); + +return (int )tmpval64; +} + +/* +* Get DPLL lock or not info from stable interrupt status register. +* User application must use this control to get locked, +* then can do next PCM operation +*/ +static int fsl_spdif_rxrate_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +int rate =spdif_get_rxclk_rate (spdif_priv,SPDIF_DEFAULT_GAINSEL ); + +if (atomic_read (&spdif_priv->dpll_locked)) + ucontrol->value.integer.value[0 ] = rate; +else + ucontrol->value.integer.value[0 ] =0 ; + +return 0 ; +} + +/* User bit sync mode info */ +static int fsl_spdif_usync_info (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_info *uinfo) +{ + uinfo->type =SNDRV_CTL_ELEM_TYPE_BOOLEAN ; + uinfo->count =1 ; + uinfo->value.integer.min =0 ; + uinfo->value.integer.max =1 ; + +return 0 ; +} + +/* +* User bit sync mode: +* 1 CD User channel subcode +* 0 Non-CD data +*/ +static int fsl_spdif_usync_get (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct regmap *regmap = spdif_priv->regmap; +u32 val; + +regmap_read (regmap,REG_SPDIF_SRCD , &val); + ucontrol->value.integer.value[0 ] = (val &SRCD_CD_USER ) !=0 ; + +return 0 ; +} + +/* +* User bit sync mode: +* 1 CD User channel subcode +* 0 Non-CD data +*/ +static int fsl_spdif_usync_put (struct snd_kcontrol *kcontrol, +struct snd_ctl_elem_value *ucontrol) +{ +struct snd_soc_dai *cpu_dai =snd_kcontrol_chip (kcontrol); +struct fsl_spdif_priv *spdif_priv =snd_soc_dai_get_drvdata (cpu_dai); +struct regmap *regmap = spdif_priv->regmap; +u32 val = ucontrol->value.integer.value[0 ] <<SRCD_CD_USER_OFFSET ; + +regmap_update_bits (regmap,REG_SPDIF_SRCD ,SRCD_CD_USER , val); + +return 0 ; +} + +/* FSL SPDIF IEC958 controller defines */ +static struct snd_kcontrol_new fsl_spdif_ctrls[] = { +/* status cchanel controller */ + { + .iface =SNDRV_CTL_ELEM_IFACE_MIXER , + .name =SNDRV_CTL_NAME_IEC958 ("" ,PLAYBACK ,DEFAULT ), + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_WRITE | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_info, + .get = fsl_spdif_pb_get, + .put = fsl_spdif_pb_put, + }, + { + .iface =SNDRV_CTL_ELEM_IFACE_PCM , + .name =SNDRV_CTL_NAME_IEC958 ("" ,CAPTURE ,DEFAULT ), + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_info, + .get = fsl_spdif_capture_get, + }, +/* user bits controller */ + { + .iface =SNDRV_CTL_ELEM_IFACE_PCM , + .name ="IEC958 Subcode Capture Default" , + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_info, + .get = fsl_spdif_subcode_get, + }, + { + .iface =SNDRV_CTL_ELEM_IFACE_PCM , + .name ="IEC958 Q-subcode Capture Default" , + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_qinfo, + .get = fsl_spdif_qget, + }, +/* valid bit error controller */ + { + .iface =SNDRV_CTL_ELEM_IFACE_PCM , + .name ="IEC958 V-Bit Errors" , + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_vbit_info, + .get = fsl_spdif_vbit_get, + }, +/* DPLL lock info get controller */ + { + .iface =SNDRV_CTL_ELEM_IFACE_PCM , + .name ="RX Sample Rate" , + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_rxrate_info, + .get = fsl_spdif_rxrate_get, + }, +/* User bit sync mode set/get controller */ + { + .iface =SNDRV_CTL_ELEM_IFACE_PCM , + .name ="IEC958 USyncMode CDText" , + .access =SNDRV_CTL_ELEM_ACCESS_READ | +SNDRV_CTL_ELEM_ACCESS_WRITE | +SNDRV_CTL_ELEM_ACCESS_VOLATILE , + .info = fsl_spdif_usync_info, + .get = fsl_spdif_usync_get, + .put = fsl_spdif_usync_put, + }, +}; + +static int fsl_spdif_dai_probe (struct snd_soc_dai *dai) +{ +struct fsl_spdif_priv *spdif_private =snd_soc_dai_get_drvdata (dai); + + dai->playback_dma_data = &spdif_private->dma_params_tx; + dai->capture_dma_data = &spdif_private->dma_params_rx; + + snd_soc_add_dai_controls(dai, fsl_spdif_ctrls,
ARRAY_SIZE(fsl_spdif_ctrls)); +sound/soc/fsl/fsl_spdif.c new file +31
-0+return 0 ; +} + +struct snd_soc_dai_driver fsl_spdif_dai = { + .probe = &fsl_spdif_dai_probe, + .playback = { + .channels_min =2 , + .channels_max =2 , + .rates =FSL_SPDIF_RATES_PLAYBACK , + .formats =FSL_SPDIF_FORMATS_PLAYBACK , + }, + .capture = { + .channels_min =2 , + .channels_max =2 , + .rates =FSL_SPDIF_RATES_CAPTURE , + .formats =FSL_SPDIF_FORMATS_CAPTURE , + }, + .ops = &fsl_spdif_dai_ops, +}; + +static const struct snd_soc_component_driver fsl_spdif_component = { + .name ="fsl-spdif" , +}; + +/* +* ================ +* FSL SPDIF REGMAP +* ================ +*/ + +static bool fsl_spdif_readable_reg(struct device *dev, unsigned intreg) +{
sound/soc/fsl/fsl_spdif.c new file +23
-0+switch (reg) { +case REG_SPDIF_SCR : +case REG_SPDIF_SRCD : +case REG_SPDIF_SRPC : +case REG_SPDIF_SIE : +case REG_SPDIF_SIS : +case REG_SPDIF_SRL : +case REG_SPDIF_SRR : +case REG_SPDIF_SRCSH : +case REG_SPDIF_SRCSL : +case REG_SPDIF_SRU : +case REG_SPDIF_SRQ : +case REG_SPDIF_STCSCH : +case REG_SPDIF_STCSCL : +case REG_SPDIF_SRFM : +case REG_SPDIF_STC : +return true; +default : +return false; + }; +} + +static bool fsl_spdif_writeable_reg(struct device *dev, unsigned intreg) +{
sound/soc/fsl/fsl_spdif.c new file +18
-0+switch (reg) { +case REG_SPDIF_SCR : +case REG_SPDIF_SRCD : +case REG_SPDIF_SRPC : +case REG_SPDIF_SIE : +case REG_SPDIF_SIC : +case REG_SPDIF_STL : +case REG_SPDIF_STR : +case REG_SPDIF_STCSCH : +case REG_SPDIF_STCSCL : +case REG_SPDIF_STC : +return true; +default : +return false; + }; +} + +static bool fsl_spdif_volatile_reg(struct device *dev, unsigned intreg) +{
sound/soc/fsl/fsl_spdif.c new file +17
-0+/* Sync all registers after reset */ +return true; +} + +static const struct regmap_config fsl_spdif_regmap_config = { + .reg_bits =32 , + .reg_stride =4 , + .val_bits =32 , + + .max_register =REG_SPDIF_STC , + .readable_reg = fsl_spdif_readable_reg, + .writeable_reg = fsl_spdif_writeable_reg, + .volatile_reg = fsl_spdif_volatile_reg, + .cache_type =REGCACHE_RBTREE , +}; + +static void spdif_clksrc_index_lookup(struct fsl_spdif_priv
*spdif_priv) +{sound/soc/fsl/fsl_spdif.c new file +42
-0+const char *rate[] = {"tx-32000" ,"tx-44100" ,"tx-48000" , }; +struct platform_device *pdev = spdif_priv->pdev; +struct device_node *np = pdev->dev.of_node; +struct clk *tmpclk; +char tmp[16 ]; +int i, j; + +/* Start to decide tx/rxclk_src index */ + spdif_priv->rxclk_src =-1 ; +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) + spdif_priv->txclk_src[i] =-1 ; + +/* Look up the clock source list to find the clock source index */ +for (i =0 ; i <STC_TXCLK_SRC_MAX ; i++) { +sprintf (tmp,"src%d" , i); + tmpclk =devm_clk_get (&pdev->dev, tmp); +if (IS_ERR (tmpclk)) +continue ; + +/* Catch the clksrc identical to configured rxclk */ +if (tmpclk == spdif_priv->rxclk) + spdif_priv->rxclk_src = i; + +for (j =0 ; j <SPDIF_TXRATE_MAX ; j++) { +/* Catch the clksrc identical to configured txclk */ +if (tmpclk == spdif_priv->txclk[j]) + spdif_priv->txclk_src[j] = i; + } + } + +/* Plan B when failed to find the index for rx clock source */ +if (spdif_priv->rxclk_src ==-1 ) { +dev_warn (&pdev->dev,"force to use core clock as rx clock.\n" ); + spdif_priv->rxclk_src =DEFAULT_RXCLK_SRC ; + spdif_priv->rxclk = spdif_priv->coreclk; + } + +/* Plan B when failed to find the index for tx clock source */ +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) { +if (spdif_priv->txclk_src[i] !=-1 ) +continue ; + dev_warn(&pdev->dev, "force to use core clock as %s clock.\n",rate[i]); + spdif_priv->txclk_src[i] =
DEFAULT_TXCLK_SRC;sound/soc/fsl/fsl_spdif.c new file +61
-0+ spdif_priv->txclk[i] = spdif_priv->coreclk; + } + +if (i >SRPC_NODPLL_START1 ) { +/* Drop src5 for rxclk src */ + spdif_priv->rxclk_src -=1 ; + +/* Restore the offset to higher rxclk src */ + spdif_priv->rxclk_src +=SRPC_CLKSRC_SEL_LOCKED_OFFSET1 ; + } + +/* Use the un-conditioned conf for rx clock if no rx-clksrc-lock */ +if (!of_property_read_bool (np,"rx-clksrc-lock" )) { +if (i <SRPC_NODPLL_START1 ) + spdif_priv->rxclk_src +=SRPC_CLKSRC_SEL_LOCKED_OFFSET1 ; +else if (i <SRPC_NODPLL_START2 ) + spdif_priv->rxclk_src +=SRPC_CLKSRC_SEL_LOCKED_OFFSET2 ; + } +} + +static void spdif_clk_cal_txdiv (struct fsl_spdif_priv *spdif_priv) +{ +struct platform_device *pdev = spdif_priv->pdev; +struct clk **clk = spdif_priv->txclk; +u64 rate_ideal, rate_actual, sub, savesub; +u32 i, div, arate, rate[] = {32000 ,44100 ,48000 , }; + +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++, savesub =100000 ) { +for (div =1 ; div <=128 ; div++) { + rate_ideal = rate[i] * (div +1 ) *64 ; + rate_actual =clk_round_rate (clk[i], rate_ideal); + + arate = rate_actual /64 ; + arate /= div; +if (arate == rate[i]) { + savesub =0 ; + spdif_priv->txclk_div[i] = div; +break ; + }else if (arate / rate[i] ==1 ) { + sub = (arate - rate[i]) *100000 ; +do_div (sub, rate[i]); +if (sub < savesub) { + savesub = sub; + spdif_priv->txclk_div[i] = div; + } + }else if (rate[i] / arate ==1 ) { + sub = (rate[i] - arate) *100000 ; +do_div (sub, rate[i]); +if (sub < savesub) { + savesub = sub; + spdif_priv->txclk_div[i] = div; + } + } + } +dev_dbg (&pdev->dev,"calculated %dHz div: %d\n" , + rate[i], spdif_priv->txclk_div[i]); + } +} + +static int fsl_spdif_probe (struct platform_device *pdev) +{
sound/soc/fsl/fsl_spdif.c line 1147
Quoted 10 lines
sound/soc/fsl/fsl_spdif.c new file +10
-0+const char *p, *rate[] = {"tx-32000" ,"tx-44100" ,"tx-48000" , }; +struct fsl_spdif_priv *spdif_priv; +struct spdif_mixer_control *ctrl; +struct device_node *np = pdev->dev.of_node; +struct resource res; +void __iomem *regs; +int ret =0 , i; + +if (!of_device_is_available (np)) +return -ENODEV ;
I'm not sure your probe function will be ever called if the device is unavailable. A simple check for !np would be enough.
sound/soc/fsl/fsl_spdif.c line 1149
Quoted 1 line
sound/soc/fsl/fsl_spdif.c new file +1
-0+/* The DAI name is the last part of the full name of the node. */
This has not been mentioned in binding documentation and I'm not sure this is correct.
sound/soc/fsl/fsl_spdif.c line 1150
Quoted 1 line
sound/soc/fsl/fsl_spdif.c new file +1
-0+ p =strrchr (np->full_name,'/' ) +1 ;
You should be able to use np->name directly.
Quoted 15 lines
sound/soc/fsl/fsl_spdif.c new file +13
-0+ spdif_priv =devm_kzalloc (&pdev->dev, +sizeof (struct fsl_spdif_priv ) +strlen (p) +1 ,GFP_KERNEL ); +if (!spdif_priv) { +dev_err (&pdev->dev,"could not allocate DAI object\n" ); +return -ENOMEM ; + } + +strcpy (spdif_priv->name, p); + + spdif_priv->pdev = pdev; + +/* Initialize this copy of the CPU DAI driver structure */ + memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai,
sizeof(fsl_spdif_dai)); +spdif_priv->cpu_dai_drv.name=spdif_priv->name;
sound/soc/fsl/fsl_spdif.c line 1167
Quoted 3 lines
sound/soc/fsl/fsl_spdif.c new file +3
-0+ +/* Get the addresses and IRQ */ + ret =of_address_to_resource (np,0 , &res);
This has been already done for you by platform driver core. You can just use platform_get_resource() to retrieve the already parsed resource.
sound/soc/fsl/fsl_spdif.c line 1173
Quoted 6 lines
sound/soc/fsl/fsl_spdif.c new file +6
-0+if (ret) { +dev_err (&pdev->dev,"could not determine device resources\n" ); +return ret; + } + + regs =of_iomap (np,0 );
devm_ioremap_resource() would be better here.
Quoted 4 lines
sound/soc/fsl/fsl_spdif.c new file +4
-0+if (IS_ERR (regs)) { +dev_err (&pdev->dev,"could not map device resources\n" ); +return PTR_ERR (regs); + }
sound/soc/fsl/fsl_spdif.c line 1187
Quoted 10 lines
sound/soc/fsl/fsl_spdif.c new file +10
-0+ + spdif_priv->regmap =devm_regmap_init_mmio_clk (&pdev->dev, +"core" , regs, &fsl_spdif_regmap_config); +if (IS_ERR (spdif_priv->regmap)) { +dev_err (&pdev->dev,"regmap init failed\n" ); + ret =PTR_ERR (spdif_priv->regmap); +return ret; + } + + spdif_priv->irq =irq_of_parse_and_map (np,0 );
platform_get_resource()
Quoted 5 lines
sound/soc/fsl/fsl_spdif.c new file +5
-0+if (spdif_priv->irq ==NO_IRQ ) { +dev_err (&pdev->dev,"no irq for node %s\n" , np->full_name); + ret = -ENXIO ; + goto error_iomap; + }
sound/soc/fsl/fsl_spdif.c line 1202
Quoted 10 lines
sound/soc/fsl/fsl_spdif.c new file +10
-0+ +/* The 'name' should not have any slashes in it. */ + ret =request_irq (spdif_priv->irq, spdif_isr,0 , + spdif_priv->name, spdif_priv); +if (ret) { +dev_err (&pdev->dev,"could not claim irq %u\n" , spdif_priv->irq); + goto error_irqmap; + } + + spdif_priv->coreclk =devm_clk_get (&pdev->dev,NULL );
I'm not sure this is correct. You have not specified the order of clocks in your DT bindings, so it is not guaranteed that "core" clock will be always first.
IMHO it won't hurt to simply call devm_clk_get() with "core" as clock name and will be much safer.
Best regards,
Tomasz
Quoted 364 lines
sound/soc/fsl/fsl_spdif.c new file +134
-0+if (IS_ERR (spdif_priv->coreclk)) { +dev_err (&pdev->dev,"failed to get clock: %d\n" , ret); + ret =PTR_ERR (spdif_priv->coreclk); + goto error_irqreq; + } + + spdif_priv->rxclk =devm_clk_get (&pdev->dev,"rx" ); +if (IS_ERR (spdif_priv->rxclk)) { +dev_warn (&pdev->dev,"using core clock as rx clk\n" ); + spdif_priv->rxclk = spdif_priv->coreclk; + } + + spdif_priv->txclk_main =devm_clk_get (&pdev->dev,"tx" ); +if (IS_ERR (spdif_priv->txclk_main)) { +dev_warn (&pdev->dev,"using core clock as tx clk\n" ); + spdif_priv->txclk_main = spdif_priv->coreclk; + } + +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) { + spdif_priv->txclk[i] =devm_clk_get (&pdev->dev, rate[i]); +if (IS_ERR (spdif_priv->txclk[i])) { +dev_warn (&pdev->dev,"using tx clock as %s clk\n" , rate[i]); + spdif_priv->txclk[i] = spdif_priv->txclk_main; + } + } + +spdif_clksrc_index_lookup (spdif_priv); + +/* We use regmap to control core clk, so no need to prepare it */ +clk_prepare (spdif_priv->rxclk); +clk_prepare (spdif_priv->txclk_main); +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) +clk_prepare (spdif_priv->txclk[i]); + +spdif_clk_cal_txdiv (spdif_priv); + +/* initial spinlock for control data */ + ctrl = &spdif_priv->fsl_spdif_control; +spin_lock_init (&ctrl->ctl_lock); + +/* init tx channel status default value */ + ctrl->ch_status[0 ] = +IEC958_AES0_CON_NOT_COPYRIGHT |IEC958_AES0_CON_EMPHASIS_5015 ; + ctrl->ch_status[1 ] =IEC958_AES1_CON_DIGDIGCONV_ID ; + ctrl->ch_status[2 ] =0x00 ; + ctrl->ch_status[3 ] = +IEC958_AES3_CON_FS_44100 |IEC958_AES3_CON_CLOCK_1000PPM ; + +atomic_set (&spdif_priv->dpll_locked,0 ); + + spdif_priv->dma_params_tx.maxburst =FSL_SPDIF_TXFIFO_WML ; + spdif_priv->dma_params_rx.maxburst =FSL_SPDIF_RXFIFO_WML ; + spdif_priv->dma_params_tx.addr = res.start +REG_SPDIF_STL ; + spdif_priv->dma_params_rx.addr = res.start +REG_SPDIF_SRL ; + +/* Register with ASoC */ +dev_set_drvdata (&pdev->dev, spdif_priv); + + ret =snd_soc_register_component (&pdev->dev, &fsl_spdif_component, + &spdif_priv->cpu_dai_drv,1 ); +if (ret) { +dev_err (&pdev->dev,"failed to register DAI: %d\n" , ret); + goto error_dev; + } + + ret =imx_pcm_dma_init (pdev); +if (ret) { +dev_err (&pdev->dev,"imx_pcm_dma_init failed: %d\n" , ret); + goto error_component; + } + +return ret; + +error_component: +snd_soc_unregister_component (&pdev->dev); +error_dev: +dev_set_drvdata (&pdev->dev,NULL ); +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) +clk_unprepare (spdif_priv->txclk[i]); +clk_unprepare (spdif_priv->txclk_main); +clk_unprepare (spdif_priv->rxclk); +error_irqreq: +free_irq (spdif_priv->irq, spdif_priv); +error_irqmap: +irq_dispose_mapping (spdif_priv->irq); +error_iomap: +iounmap (regs); + +return ret; +} + +static int fsl_spdif_remove (struct platform_device *pdev) +{ +struct fsl_spdif_priv *spdif_priv =platform_get_drvdata (pdev); +int i; + +imx_pcm_dma_exit (pdev); +snd_soc_unregister_component (&pdev->dev); + +for (i =0 ; i <SPDIF_TXRATE_MAX ; i++) +clk_unprepare (spdif_priv->txclk[i]); +clk_unprepare (spdif_priv->txclk_main); +clk_unprepare (spdif_priv->rxclk); + +free_irq (spdif_priv->irq, spdif_priv); +irq_dispose_mapping (spdif_priv->irq); + +dev_set_drvdata (&pdev->dev,NULL ); + +return 0 ; +} + +static const struct of_device_id fsl_spdif_dt_ids[] = { + { .compatible ="fsl,imx35-spdif" , }, + {} +}; +MODULE_DEVICE_TABLE (of, fsl_spdif_dt_ids); + +static struct platform_driver fsl_spdif_driver = { + .driver = { + .name ="fsl-spdif-dai" , + .owner =THIS_MODULE , + .of_match_table = fsl_spdif_dt_ids, + }, + .probe = fsl_spdif_probe, + .remove = fsl_spdif_remove, +}; + +module_platform_driver (fsl_spdif_driver); + +MODULE_AUTHOR ("Freescale Semiconductor, Inc." ); +MODULE_DESCRIPTION ("Freescale S/PDIF CPU DAI Driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_ALIAS ("platform:fsl-spdif-dai" );sound/soc/fsl/fsl_spdif.h new file +12
-0@@ -0,0 +1,224 @@ +/* +* fsl_spdif.h - ALSA S/PDIF interface for the Freescale i.MX SoC +* +* Copyright (C) 2013 Freescale Semiconductor, Inc. +* +* Author: Nicolin Chen <[email protected]> +* +* Based on fsl_ssi.h +* Author: Timur Tabi <[email protected]> +* Copyright 2007-2008 Freescale Semiconductor, Inc. +* +* This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied.
+ */sound/soc/fsl/fsl_spdif.h new file +89
-0+ +#ifndef _FSL_SPDIF_DAI_H +#define _FSL_SPDIF_DAI_H + +/* S/PDIF Register Map */ +#define REG_SPDIF_SCR 0x0/* SPDIF Configuration Register */ +#define REG_SPDIF_SRCD 0x4/* CDText Control Register */ +#define REG_SPDIF_SRPC 0x8/* PhaseConfig Register */ +#define REG_SPDIF_SIE 0xc/* InterruptEn Register */ +#define REG_SPDIF_SIS 0x10/* InterruptStat Register */ +#define REG_SPDIF_SIC 0x10/* InterruptClear Register */ +#define REG_SPDIF_SRL 0x14/* SPDIFRxLeft Register */ +#define REG_SPDIF_SRR 0x18/* SPDIFRxRight Register */ +#define REG_SPDIF_SRCSH 0x1c/* SPDIFRxCChannel_h Register */ +#define REG_SPDIF_SRCSL 0x20/* SPDIFRxCChannel_l Register */ +#define REG_SPDIF_SRU 0x24/* UchannelRx Register */ +#define REG_SPDIF_SRQ 0x28/* QchannelRx Register */ +#define REG_SPDIF_STL 0x2C/* SPDIFTxLeft Register */ +#define REG_SPDIF_STR 0x30/* SPDIFTxRight Register */ +#define REG_SPDIF_STCSCH 0x34/* SPDIFTxCChannelCons_h Register */ +#define REG_SPDIF_STCSCL 0x38/* SPDIFTxCChannelCons_l Register */ +#define REG_SPDIF_SRFM 0x44/* FreqMeas Register */ +#define REG_SPDIF_STC 0x50/* SPDIFTxClk Register */ + + +/* SPDIF Configuration register */ +#define SCR_RXFIFO_CTL_OFFSET 23 +#define SCR_RXFIFO_CTL_MASK (1 << SCR_RXFIFO_CTL_OFFSET) +#define SCR_RXFIFO_CTL_ZERO (1 << SCR_RXFIFO_CTL_OFFSET) +#define SCR_RXFIFO_OFF_OFFSET 22 +#define SCR_RXFIFO_OFF_MASK (1 << SCR_RXFIFO_OFF_OFFSET) +#define SCR_RXFIFO_OFF (1 << SCR_RXFIFO_OFF_OFFSET) +#define SCR_RXFIFO_RST_OFFSET 21 +#define SCR_RXFIFO_RST_MASK (1 << SCR_RXFIFO_RST_OFFSET) +#define SCR_RXFIFO_RST (1 << SCR_RXFIFO_RST_OFFSET) +#define SCR_RXFIFO_FSEL_OFFSET 19 +#define SCR_RXFIFO_FSEL_MASK (0x3 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF0 (0x0 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF4 (0x1 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF8 (0x2 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_FSEL_IF12 (0x3 << SCR_RXFIFO_FSEL_OFFSET) +#define SCR_RXFIFO_AUTOSYNC_OFFSET 18 +#define SCR_RXFIFO_AUTOSYNC_MASK (1 << SCR_RXFIFO_AUTOSYNC_OFFSET) +#define SCR_RXFIFO_AUTOSYNC (1 << SCR_RXFIFO_AUTOSYNC_OFFSET) +#define SCR_TXFIFO_AUTOSYNC_OFFSET 17 +#define SCR_TXFIFO_AUTOSYNC_MASK (1 << SCR_TXFIFO_AUTOSYNC_OFFSET) +#define SCR_TXFIFO_AUTOSYNC (1 << SCR_TXFIFO_AUTOSYNC_OFFSET) +#define SCR_TXFIFO_FSEL_OFFSET 15 +#define SCR_TXFIFO_FSEL_MASK (0x3 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF0 (0x0 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF4 (0x1 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF8 (0x2 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_TXFIFO_FSEL_IF12 (0x3 << SCR_TXFIFO_FSEL_OFFSET) +#define SCR_LOW_POWER (1 << 13) +#define SCR_SOFT_RESET (1 << 12) +#define SCR_TXFIFO_CTRL_OFFSET 10 +#define SCR_TXFIFO_CTRL_MASK (0x3 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_TXFIFO_CTRL_ZERO (0x0 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_TXFIFO_CTRL_NORMAL (0x1 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_TXFIFO_CTRL_ONESAMPLE (0x2 << SCR_TXFIFO_CTRL_OFFSET) +#define SCR_DMA_RX_EN_OFFSET 9 +#define SCR_DMA_RX_EN_MASK (1 << SCR_DMA_RX_EN_OFFSET) +#define SCR_DMA_RX_EN (1 << SCR_DMA_RX_EN_OFFSET) +#define SCR_DMA_TX_EN_OFFSET 8 +#define SCR_DMA_TX_EN_MASK (1 << SCR_DMA_TX_EN_OFFSET) +#define SCR_DMA_TX_EN (1 << SCR_DMA_TX_EN_OFFSET) +#define SCR_VAL_OFFSET 5 +#define SCR_VAL_MASK (1 << SCR_VAL_OFFSET) +#define SCR_VAL_CLEAR (1 << SCR_VAL_OFFSET) +#define SCR_TXSEL_OFFSET 2 +#define SCR_TXSEL_MASK (0x7 << SCR_TXSEL_OFFSET) +#define SCR_TXSEL_OFF (0 << SCR_TXSEL_OFFSET) +#define SCR_TXSEL_RX (1 << SCR_TXSEL_OFFSET) +#define SCR_TXSEL_NORMAL (0x5 << SCR_TXSEL_OFFSET) +#define SCR_USRC_SEL_OFFSET 0x0 +#define SCR_USRC_SEL_MASK (0x3 << SCR_USRC_SEL_OFFSET) +#define SCR_USRC_SEL_NONE (0x0 << SCR_USRC_SEL_OFFSET) +#define SCR_USRC_SEL_RECV (0x1 << SCR_USRC_SEL_OFFSET) +#define SCR_USRC_SEL_CHIP (0x3 << SCR_USRC_SEL_OFFSET) + +/* SPDIF CDText control */ +#define SRCD_CD_USER_OFFSET 1 +#define SRCD_CD_USER (1 << SRCD_CD_USER_OFFSET) + +/* SPDIF Phase Configuration register */ +#define SRPC_DPLL_LOCKED (1 << 6) +#define SRPC_CLKSRC_SEL_OFFSET 7 +#define SRPC_CLKSRC_SEL_MASK (0xf << SRPC_CLKSRC_SEL_OFFSET) +#define SRPC_CLKSRC_SEL_SET (x) ((x << SRPC_CLKSRC_SEL_OFFSET) &
SRPC_CLKSRC_SEL_MASK) +#defineSRPC_CLKSRC_SEL_LOCKED_OFFSET15sound/soc/fsl/fsl_spdif.h new file +4
-0+#define SRPC_CLKSRC_SEL_LOCKED_OFFSET2 2 +#define SRPC_GAINSEL_OFFSET 3 +#define SRPC_GAINSEL_MASK (0x7 << SRPC_GAINSEL_OFFSET) +#define SRPC_GAINSEL_SET (x) ((x << SRPC_GAINSEL_OFFSET) &
SRPC_GAINSEL_MASK) +sound/soc/fsl/fsl_spdif.h new file +58
-0+/* SPDIF rx clock source */ +enum spdif_rxclk_src { +SRPC_CLKSRC_0 =0 , +SRPC_CLKSRC_1 , +SRPC_CLKSRC_2 , +SRPC_CLKSRC_3 , +SRPC_CLKSRC_4 , +SRPC_CLKSRC_5 , +SRPC_CLKSRC_6 , +SRPC_CLKSRC_7 , +SRPC_CLKSRC_8 , +SRPC_CLKSRC_9 , +SRPC_CLKSRC_10 , +SRPC_CLKSRC_11 , +SRPC_CLKSRC_12 , +SRPC_CLKSRC_13 , +SRPC_CLKSRC_14 , +SRPC_CLKSRC_15 , +}; +#define SRPC_CLKSRC_MAX (SRPC_CLKSRC_15 + 1) +#define DEFAULT_RXCLK_SRC SRPC_CLKSRC_0 + +enum spdif_gainsel { +GAINSEL_MULTI_24 =0 , +GAINSEL_MULTI_16 , +GAINSEL_MULTI_12 , +GAINSEL_MULTI_8 , +GAINSEL_MULTI_6 , +GAINSEL_MULTI_4 , +GAINSEL_MULTI_3 , +}; +#define GAINSEL_MULTI_MAX (GAINSEL_MULTI_3 + 1) +#define SPDIF_DEFAULT_GAINSEL GAINSEL_MULTI_8 + +/* SPDIF interrupt mask define */ +#define INT_DPLL_LOCKED (1 << 20) +#define INT_TXFIFO_UNOV (1 << 19) +#define INT_TXFIFO_RESYNC (1 << 18) +#define INT_CNEW (1 << 17) +#define INT_VAL_NOGOOD (1 << 16) +#define INT_SYM_ERR (1 << 15) +#define INT_BIT_ERR (1 << 14) +#define INT_URX_FUL (1 << 10) +#define INT_URX_OV (1 << 9) +#define INT_QRX_FUL (1 << 8) +#define INT_QRX_OV (1 << 7) +#define INT_UQ_SYNC (1 << 6) +#define INT_UQ_ERR (1 << 5) +#define INT_RXFIFO_UNOV (1 << 4) +#define INT_RXFIFO_RESYNC (1 << 3) +#define INT_LOSS_LOCK (1 << 2) +#define INT_TX_EM (1 << 1) +#define INT_RXFIFO_FUL (1 << 0) + +/* SPDIF Clock register */ +#define STC_SYSCLK_DIV_OFFSET 11 +#define STC_SYSCLK_DIV_MASK (0x1ff << STC_TXCLK_SRC_OFFSET) +#define STC_SYSCLK_DIV (x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) &
STC_SYSCLK_DIV_MASK) +#defineSTC_TXCLK_SRC_OFFSET8sound/soc/fsl/fsl_spdif.h new file +2
-0+#define STC_TXCLK_SRC_MASK (0x7 << STC_TXCLK_SRC_OFFSET) +#define STC_TXCLK_SRC_SET (x) ((x << STC_TXCLK_SRC_OFFSET) &
STC_TXCLK_SRC_MASK) +#defineSTC_TXCLK_ALL_EN_OFFSET7sound/soc/fsl/fsl_spdif.h new file +5
-0+#define STC_TXCLK_ALL_EN_MASK (1 << STC_TXCLK_ALL_EN_OFFSET) +#define STC_TXCLK_ALL_EN (1 << STC_TXCLK_ALL_EN_OFFSET) +#define STC_TXCLK_DIV_OFFSET 0 +#define STC_TXCLK_DIV_MASK (0x7ff << STC_TXCLK_DIV_OFFSET) +#define STC_TXCLK_DIV (x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) &
STC_TXCLK_DIV_MASK) +sound/soc/fsl/fsl_spdif.h new file +46
-0+/* SPDIF tx clksrc */ +enum spdif_txclk_src { +STC_TXCLK_SRC_0 =0 , +STC_TXCLK_SRC_1 , +STC_TXCLK_SRC_2 , +STC_TXCLK_SRC_3 , +STC_TXCLK_SRC_4 , +STC_TXCLK_SRC_5 , +STC_TXCLK_SRC_6 , +STC_TXCLK_SRC_7 , +}; +#define STC_TXCLK_SRC_MAX (STC_TXCLK_SRC_7 + 1) +#define DEFAULT_TXCLK_SRC STC_TXCLK_SRC_1 + +/* SPDIF tx rate */ +enum spdif_txrate { +SPDIF_TXRATE_32000 =0 , +SPDIF_TXRATE_44100 , +SPDIF_TXRATE_48000 , +}; +#define SPDIF_TXRATE_MAX (SPDIF_TXRATE_48000 + 1) + + +#define SPDIF_CSTATUS_BYTE 6 +#define SPDIF_UBITS_SIZE 96 +#define SPDIF_QSUB_SIZE (SPDIF_UBITS_SIZE / 8) + + +#define FSL_SPDIF_RATES_PLAYBACK (SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define FSL_SPDIF_RATES_CAPTURE (SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_64000 | \ + SNDRV_PCM_RATE_96000) + +#define FSL_SPDIF_FORMATS_PLAYBACK (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +#define FSL_SPDIF_FORMATS_CAPTURE (SNDRV_PCM_FMTBIT_S24_LE) + +#endif /* _FSL_SPDIF_DAI_H */
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Hi Tomasz,
Thank you for the comments. I'll revise them in v6. And below is my reply for you comments.
Quoted 34 lines · Tomasz Figa
Quoted 19 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +19
-0+ - clock-names : Includes the following entries: + name type comments + "core" Required The core clock of spdif controller + + "rx" Optional Rx clock source for spdif record. + If absent, will use core clock. + + "tx" Optional Tx clock source for spdif playback. + If absent, will use core clock. + + "tx-32000" Optional Tx clock source for 32000Hz sample rate + playback. If absent, will use tx clock. + + "tx-44100" Optional Tx clock source for 44100Hz sample rate + playback. If absent, will use tx clock. + + "tx-48000" Optional Tx clock source for 48000Hz sample rate + playback. If absent, will use tx clock. +Documentation/devicetree/bindings/sound/fsl,spdif.txt line 50
Quoted 10 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +10
-0+ "src<0-7>" Optional Clock source list for tx and rx clock + to look up their clock source indexes. + This clock list should be identical to + the list of TxClk_Source bit value of + register SPDIF_STC. If absent or failed + to look up, tx and rx clock would then + ignore the "rx", "tx" "tx-32000", + "tx-44100", "tx-48000" clock phandles + and select the core clock as default + tx and rx clock.I suspect a little abuse of clocks property here. From the description of "core" and "src<0-7>" clocks I assume that the IP can have up to 9 clock inputs - core clock and up to 8 extra source clocks. Is it correct?
Quoted 3 lines
If yes, this makes the "tx", "rx" and "tx-*" clocks describe configuration, not hardware. IMHO it should be up to the driver which source clocks to use for tx and rx channels and for each sampling rate.
First, you are right that all the properties you just commented are software configurations. And I got the point that device tree now can't allow any software configuration even if the actual hardware connection will depend on it.
If so, I would like to remove those abused clocks and also drop the unused clocks in src<0-7>, then just remain those needed clocks src. I think that can be plausible because there'll be no more clock abuse and the driver will be able to get the source index from the name 'src<num>'.
And you are right about the 9 clock inputs, just there're not only 9 inputs but also an extra external clock from S/PDIF transmitter via coaxial cable or optical fiber -- RxCLK. Please check the following list:
0000 if (DPLL Locked) SPDIF_RxClk else extal 0001 if (DPLL Locked) SPDIF_RxClk else spdif_clk 0010 if (DPLL Locked) SPDIF_RxClk else asrc_clk 0011 if (DPLL Locked) SPDIF_RxClk else spdif_extclk 0100 if (DPLL Locked) SPDIF_Rxclk else esai_hckt 0101 extal_clk
0110 spdif_clk
0111 asrc_clk
1000 spdif_extclk
1001 esai_hckt
1010 if (DPLL Locked) SPDIF_RxClk else mlb_clk 1011 if (DPLL Locked) SPDIF_RxClk else mlb_phy_clk 1100 mkb_clk
1101 mlb_phy_clk
When (DPLL Locked) condition matches, the rx clock can ignore the 8 input clocks from clock mux then use the external one from a S/PDIF transmitter.
So for the below part:
Quoted 8 lines
Quoted 5 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +3
-0+Optional properties: + + - rx-clksrc-lock: This is a boolean property. If present, ClkSrc_Selbit + of
SPDIF_SRPCwould be set a clock source that cares DPLL locked condition. +This again looks like software configuration, not hardware description. Could you elaborate a bit more on meaning of this property?
I think the rx-clksrc-lock property should be included in DT as well, since it's exactly a available clock source for rx. But I guess I just need to figure out a better way or a more elaborated description.
Thank you,
Nicolin Chen
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 75 lines · Nicolin Chen
Hi Tomasz,
Thank you for the comments. I'll revise them in v6. And below is my reply for you comments.
Quoted 34 lines · Tomasz Figa
Quoted 19 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +19
-0+ - clock-names : Includes the following entries: + name type comments + "core" Required The core clock of spdif controller + + "rx" Optional Rx clock source for spdif record. + If absent, will use core clock. + + "tx" Optional Tx clock source for spdif playback. + If absent, will use core clock. + + "tx-32000" Optional Tx clock source for 32000Hz sample rate + playback. If absent, will use tx clock. + + "tx-44100" Optional Tx clock source for 44100Hz sample rate + playback. If absent, will use tx clock. + + "tx-48000" Optional Tx clock source for 48000Hz sample rate + playback. If absent, will use tx clock. +Documentation/devicetree/bindings/sound/fsl,spdif.txt line 50
Quoted 10 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +10
-0+ "src<0-7>" Optional Clock source list for tx and rx clock + to look up their clock source indexes. + This clock list should be identical to + the list of TxClk_Source bit value of + register SPDIF_STC. If absent or failed + to look up, tx and rx clock would then + ignore the "rx", "tx" "tx-32000", + "tx-44100", "tx-48000" clock phandles + and select the core clock as default + tx and rx clock.I suspect a little abuse of clocks property here. From the description of "core" and "src<0-7>" clocks I assume that the IP can have up to 9 clock inputs - core clock and up to 8 extra source clocks. Is it correct?
Quoted 3 lines
If yes, this makes the "tx", "rx" and "tx-*" clocks describe configuration, not hardware. IMHO it should be up to the driver which source clocks to use for tx and rx channels and for each sampling rate.
First, you are right that all the properties you just commented are software configurations. And I got the point that device tree now can't allow any software configuration even if the actual hardware connection will depend on it.
If so, I would like to remove those abused clocks and also drop the unused clocks in src<0-7>, then just remain those needed clocks src. I think that can be plausible because there'll be no more clock abuse and the driver will be able to get the source index from the name 'src<num>'.
And you are right about the 9 clock inputs, just there're not only 9 inputs but also an extra external clock from S/PDIF transmitter via coaxial cable or optical fiber -- RxCLK. Please check the following list:
0000 if (DPLL Locked)
SPDIF_RxClkelse extal 0001 if (DPLL Locked)SPDIF_RxClkelsespdif_clk0010 if (DPLL Locked)SPDIF_RxClkelseasrc_clk0011 if (DPLL Locked)SPDIF_RxClkelsespdif_extclk0100 if (DPLL Locked)SPDIF_Rxclkelseesai_hckt0101extal_clk
0110spdif_clk
0111asrc_clk
1000spdif_extclk
1001esai_hckt
1010 if (DPLL Locked)SPDIF_RxClkelsemlb_clk1011 if (DPLL Locked)SPDIF_RxClkelsemlb_phy_clk1100mkb_clk
1101mlb_phy_clk
Quoted 2 lines
When (DPLL Locked) condition matches, the rx clock can ignore the 8 input clocks from clock mux then use the external one from a S/PDIF transmitter.
So extal, spdif_clk, asrc_clk, spdif_extclk, esai_hckt, mlb_clk and mlb_phy_clk are clocks provided to the S/PDIF core and thus should be described in the devicetree.
Which of them the driver should use is configuration and thus normally should *not* be described in the devicetree. However, there may be no good way for the driver to know which clock to use in which case. There may be additional board requirements which are unknown to the driver. So in this case it might be valid to put the information which clock to use into the devicetree. But be aware that from the moment you put this information into the devicetree the driver is no longer free to chose the best clock, even if in future we find a good way to automatically guess the best clock. Do you have some insights in which case I would use which input clock? Is this only about which clock has the best suitable input frequency or is this also about synchronization of the audio signal with some other unit?
Likewise with the rx-clksrc-lock property. what are the reasons to enable/disable this property? Is this an option you want to change during runtime? Is it an option you always want to use when it's available?
If you don't know the answer then it might be a good option to just let the driver pick a sane default. If someone feels the need to change the default he probably comes up with a good reason why this is necessary. And then we can discuss again whether we want to have the option in the devicetree or some sysfs entry or whatever else.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Hi Sascha,
Thank you for the detailed comments.
Quoted 4 lines · Sascha Hauer
Which of them the driver should use is configuration and thus normally should *not* be described in the devicetree. However, there may be no good way for the driver to know which clock to use in which case. There may be additional board requirements which are unknown to the driver. So
Quoted 8 lines
in this case it might be valid to put the information which clock to use into the devicetree. But be aware that from the moment you put this information into the devicetree the driver is no longer free to chose the best clock, even if in future we find a good way to automatically guess the best clock. Do you have some insights in which case I would use which input clock? Is this only about which clock has the best suitable input frequency or is this also about synchronization of the audio signal with some other unit?
I understand. What I'm thinking now is to let the driver find the best clock source for tx clock and a correspond divisor like this:
"tx<0-8>" Optional Tx clock source for spdif playback.
If absent, will use core clock. The index from 0 to 8 is identical to the clock source list described in TxClk_Source bit of register STC. Multiple clock source are allowed for this tx clock source. The driver will select one source from them for each supported sample rate according to the clock rates of these provided clock sources.
Please review this idea.
And likewise for rx:
"rx<0-16>" Optional Rx clock source for spdif record.
If absent, will use core clock. The index from 0 to 16 is identical to the clock source list described in ClkSrc_Sel bit of register SRPC. If the index provided contains an "if (DPLL Locked)" condition in its source, the correspond clock phandle should be the one in "else" path. Only one rx clock source should be defined here.
Quoted 10 lines
Likewise with the rx-clksrc-lock property. what are the reasons to enable/disable this property? Is this an option you want to change during runtime? Is it an option you always want to use when it's available?
If you don't know the answer then it might be a good option to just let the driver pick a sane default. If someone feels the need to change the default he probably comes up with a good reason why this is necessary. And then we can discuss again whether we want to have the option in the devicetree or some sysfs entry or whatever else.
The answer is, SPDIF controller actually doesn't care about which rx clock source being chosen or even whether it has the "if (DPLL Locked)" condition or not. It can measure its input clock sample rate by measuring the signal source, from a spdif transmitter via coaxial cable or optical line. However, the rxclk will be sent to other IP, ASRC on i.MX6Q for example. Quoting from the i.MX6Q reference manual that "Both the Rx clock and Tx clock are sent to the ASRC".
Therefore, if 'rx-clksrc-lock' is present, that means ASRC will get a clock source indirectly from coaxial cable that contains the sample rate information. So it can know what input sample rate is and do his own procedure accordingly.
Thank you,
Nicolin Chen
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 21 lines · Nicolin Chen
Hi Sascha,
Thank you for the detailed comments.
Quoted 4 lines · Sascha Hauer
Which of them the driver should use is configuration and thus normally should *not* be described in the devicetree. However, there may be no good way for the driver to know which clock to use in which case. There may be additional board requirements which are unknown to the driver. So
Quoted 8 lines
in this case it might be valid to put the information which clock to use into the devicetree. But be aware that from the moment you put this information into the devicetree the driver is no longer free to chose the best clock, even if in future we find a good way to automatically guess the best clock. Do you have some insights in which case I would use which input clock? Is this only about which clock has the best suitable input frequency or is this also about synchronization of the audio signal with some other unit?
I understand. What I'm thinking now is to let the driver find the best clock source for tx clock and a correspond divisor like this:
Quoted 11 lines
"tx<0-8>" Optional Tx clock source for spdif playback.
If absent, will use core clock. The index from 0 to 8 is identical to the clock source list described inTxClk_Sourcebit of register STC. Multiple clock source are allowed for this tx clock source. The driver will select one source from them for each supported sample rate according to the clock rates of these provided clock sources.
You mean tx<0-7>.
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Quoted 6 lines
Please review this idea.
And likewise for rx:
Quoted 11 lines
"rx<0-16>" Optional Rx clock source for spdif record.
If absent, will use core clock. The index from 0 to 16 is identical to the clock source list described inClkSrc_Selbit of register SRPC. If the index provided contains an "if (DPLL Locked)" condition in its source, the correspond clock phandle should be the one in "else" path. Only one rx clock source should be defined here.
Again, describe the input clocks *to* *the* *S/PDIF* *core* in the devicetree. Nothing more, nothing less. We've already been at the point where we realized that half of the above clocks only describe the 'PDLL locked' condition. Also the tx clocks are from what I see identical to the rx clocks. The following are the clocks:
clock-names: "core", "rxtx<0-7>" Required. The S/PDIF core has a core clock and 8 clocks which are muxed internally to provide input/output sample clocks.
This is all binding that is needed for now.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 12 lines · Sascha Hauer
Quoted 11 lines
"tx<0-8>" Optional Tx clock source for spdif playback.
If absent, will use core clock. The index from 0 to 8 is identical to the clock source list described inTxClk_Sourcebit of register STC. Multiple clock source are allowed for this tx clock source. The driver will select one source from them for each supported sample rate according to the clock rates of these provided clock sources.
Quoted 1 line
You mean tx<0-7>
Yes. Thank you.
Quoted 2 lines
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt, so in most cases we can't provide a phandle for them, eg: spdif_ext. I think it's a bit hard to force it to be 'required'. An 'optional' looks more flexible to me and a default one is ensured even if it's missing.
Quoted 18 lines
Quoted 11 lines
"rx<0-16>" Optional Rx clock source for spdif record.
If absent, will use core clock. The index from 0 to 16 is identical to the clock source list described inClkSrc_Selbit of register SRPC. If the index provided contains an "if (DPLL Locked)" condition in its source, the correspond clock phandle should be the one in "else" path. Only one rx clock source should be defined here.Again, describe the input clocks *to* *the* *S/PDIF* *core* in the devicetree. Nothing more, nothing less. We've already been at the point where we realized that half of the above clocks only describe the 'PDLL locked' condition. Also the tx clocks are from what I see identical to the rx clocks. The following are the clocks:
Quoted 3 lines
clock-names: "core", "rxtx<0-7>" Required. The S/PDIF core has a core clock and 8 clocks which are muxed internally to provide input/output sample clocks.
I know the reason why you suggest to combine two into 'rxtx<0-7>' is because the clock mux is defined so. And the previous suggestion 'the option required' is also because of it. But actually the rxclk itself, can be not only routed from the clock mux but also derived from DPLL of SPDIF Rx BLOCK as well. So, IMHO, it's more likely to be a fact that rxclk actually has 9 clock source, 8 from mux and 1 from DPLL. But why we here have to exclude it?
WELL anyway, I know my opinion might not be concerned so much. So I would like to follow the suggestion as an expediency because I still wish this patch could be finally applied and merged into mainline :(
But I still don't get why we need to be so obsessed to make this impenetrable rule of devicetree that we here have to sacrifice something we could have reasonably done.
And thank you for the comments again, Sascha.
Nicolin Chen
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 17 lines · Nicolin Chen
Quoted 12 lines · Sascha Hauer
Quoted 11 lines
"tx<0-8>" Optional Tx clock source for spdif playback.
If absent, will use core clock. The index from 0 to 8 is identical to the clock source list described inTxClk_Sourcebit of register STC. Multiple clock source are allowed for this tx clock source. The driver will select one source from them for each supported sample rate according to the clock rates of these provided clock sources.Quoted 1 line
You mean tx<0-7>
Yes. Thank you.
Quoted 8 lines
Quoted 2 lines
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt, so in most cases we can't provide a phandle for them, eg:
spdif_ext. I think it's a bit hard to force it to be 'required'. An 'optional' looks more flexible to me and a default one is ensured even if it's missing.
<&clks 0> is the dummy clock. This can be used for all input clocks not defined by the SoC.
spdif_ext would be a fixed clock on boards which provide it, but wiring this up would be the job of the board maintainer.
Quoted 10 lines
Quoted 9 lines
Again, describe the input clocks *to* *the* *S/PDIF* *core* in the devicetree. Nothing more, nothing less. We've already been at the point where we realized that half of the above clocks only describe the 'PDLL locked' condition. Also the tx clocks are from what I see identical to the rx clocks. The following are the clocks:
clock-names: "core", "rxtx<0-7>" Required. The S/PDIF core has a core clock and 8 clocks which are muxed internally to provide input/output sample clocks.
Quoted 7 lines
I know the reason why you suggest to combine two into 'rxtx<0-7>' is because the clock mux is defined so. And the previous suggestion 'the option required' is also because of it. But actually the rxclk itself, can be not only routed from the clock mux but also derived from DPLL of SPDIF Rx BLOCK as well. So, IMHO, it's more likely to be a fact that rxclk actually has 9 clock source, 8 from mux and 1 from DPLL. But why we here have to exclude it?
Because this is configuration, not hardware description.
Quoted 9 lines
WELL anyway, I know my opinion might not be concerned so much. So I would like to follow the suggestion as an expediency because I still wish this patch could be finally applied and merged into mainline :(
But I still don't get why we need to be so obsessed to make this impenetrable rule of devicetree that we here have to sacrifice something we could have reasonably done.
Look, it's really simple. Define the binding in a way that describes the hardware. Then use some sensible default in the driver for which clock to use. This doesn't have to cover all possible usecases, it only has to work. This is all that is necessary to get this driver mainline and will make most users happy. Then, later, someone might come along who needs more fine grained control over the clocks, but this guy is then able to justify *why* more control is needed.
This is not about getting a full featured driver into mainline. Get a basic driver into mainline and improve it later. You'll make it easier for us all.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 8 lines · Sascha Hauer
Quoted 5 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt, so in most cases we can't provide a phandle for them, eg:
spdif_ext. I think it's a bit hard to force it to be 'required'. An 'optional' looks more flexible to me and a default one is ensured even if it's missing.<&clks 0> is the dummy clock. This can be used for all input clocks not defined by the SoC.
That's feasible, thank you.
Quoted 2 lines
spdif_extwould be a fixed clock on boards which provide it, but wiring this up would be the job of the board maintainer.
Understood.
Quoted 11 lines
Look, it's really simple. Define the binding in a way that describes the hardware. Then use some sensible default in the driver for which clock to use. This doesn't have to cover all possible usecases, it only has to work. This is all that is necessary to get this driver mainline and will make most users happy. Then, later, someone might come along who needs more fine grained control over the clocks, but this guy is then able to justify *why* more control is needed.
This is not about getting a full featured driver into mainline. Get a basic driver into mainline and improve it later. You'll make it easier for us all.
Thank you for explain all these to the despicable me. I'll try to make myself more comfortable with rules here.
Best regards,
Nicolin Chen
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
In reply to Sascha HauerQuoted 3 lines · On Friday 16 of August 2013 12:11:51 Sascha Hauer wrote:
Quoted 2 lines · Nicolin Chen
Quoted 1 line · Sascha Hauer
Quoted 1 line
"tx<0-8>" Optional Tx clock source for spdif
playback.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
If absent, will use core clock. The index from 0 to 8 is identical to the clock source list described in
TxClk_Sourcebit of register
STC.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Multiple clock source are allowed for this tx clock source. The
driver
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
will select one source from them
for
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
each supported sample rate
according
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
to the clock rates of these
provided
Quoted 9 lines
Quoted 9 lines
Quoted 3 lines
Quoted 1 line
clock sources.
You mean tx<0-7>
Yes. Thank you.
Quoted 2 lines
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Quoted 8 lines
Quoted 5 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt, so in most cases we can't provide a phandle for them, eg:
spdif_ext. I think it's a bit hard to force it to be 'required'. An 'optional' looks more flexible to me and a default one is ensured even if it's missing.<&clks 0> is the dummy clock. This can be used for all input clocks not defined by the SoC.
Where does this assumption come from? Is it documented anywhere? What about cases when you have full description of clocks in device tree, with one node per clock and #clock-cells = <0>?
Best regards,
Tomasz
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 9 lines · Tomasz Figa
Quoted 9 lines
Quoted 8 lines
Quoted 2 lines
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt, so in most cases we can't provide a phandle for them, eg:
spdif_ext. I think it's a bit hard to force it to be 'required'. An 'optional' looks more flexible to me and a default one is ensured even if it's missing.
Quoted 4 lines
Quoted 2 lines
<&clks 0> is the dummy clock. This can be used for all input clocks not defined by the SoC.
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See Documentation/devicetree/bindings/clock/imx*-clock.txt
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 15 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 14 lines · Tomasz Figa
Quoted 14 lines
Quoted 13 lines
Quoted 3 lines
Also I would make this option required. Use a dummy clock for mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if it's
missing.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
<&clks 0> is the dummy clock. This can be used for all input clocks not
defined by the SoC.Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txt
OK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
If we really need a dummy clock, then we might also want a generic way to specify it.
Best regards,
Tomasz
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 25 lines · Tomasz Figa
Quoted 15 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 14 lines · Tomasz Figa
Quoted 14 lines
Quoted 13 lines
Quoted 3 lines
Also I would make this option required. Use a dummy clock for mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if it's
missing.Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
<&clks 0> is the dummy clock. This can be used for all input clocks not
defined by the SoC.Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txt
Quoted 7 lines
OK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings for "fixed-clock" and co friends describe relatively simple preconfigured clocks.
If a clock isn't actually wired, we shouldn't describe it at all, or we're describing what Linux wants to think rather than what the hardware actually is. That can easily be handled with clock-names.
Thanks,
Mark.
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 31 lines · Tomasz Figa
Quoted 30 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 15 lines · Tomasz Figa
Quoted 14 lines
Quoted 14 lines
Quoted 13 lines
Quoted 3 lines
Also I would make this option required. Use a dummy clock for mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if it's
missing.Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
<&clks 0> is the dummy clock. This can be used for all input clocks not
defined by the SoC.Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 6 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings for "fixed-clock" and co friends describe relatively simple preconfigured clocks.
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator implementation. A central one could be registered by the clock core, as is done by the regulator core.
I'll add this to the todo list.
Regards,
Mike
Quoted 7 lines
If a clock isn't actually wired, we shouldn't describe it at all, or we're describing what Linux wants to think rather than what the hardware actually is. That can easily be handled with clock-names.
Thanks,
Mark.
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 35 lines · Mike Turquette
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 34 lines · Tomasz Figa
Quoted 32 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 15 lines · Tomasz Figa
Quoted 14 lines
Quoted 14 lines
Quoted 13 lines
Quoted 3 lines
Also I would make this option required. Use a dummy clock for mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if it's
missing.Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
<&clks 0> is the dummy clock. This can be used for all input clocks not
defined by the SoC.Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
If we really need a dummy clock, then we might also want a generic way to specify it.
Quoted 8 lines
Quoted 3 lines
What do we actually mean by a "dummy clock"? We already have bindings for "fixed-clock" and co friends describe relatively simple preconfigured clocks.
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator implementation. A central one could be registered by the clock core, as is done by the regulator core.
When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Am I missing something?
Thanks,
Mark.
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 62 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 45 lines · Mike Turquette
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 35 lines · Tomasz Figa
Quoted 34 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 22 lines · Tomasz Figa
Quoted 21 lines
Quoted 20 lines
Quoted 5 lines
Quoted 4 lines
Also I would make this option required. Use a dummy clock for
mux
inputs that are grounded for a specific SoC.Quoted 10 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input clocks
not
defined by the SoC.Quoted 5 lines
Quoted 2 lines
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 7 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings
for "fixed-clock" and co friends describe relatively simple preconfigured clocks.Quoted 6 lines
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator
implementation. A central one could be registered by the clock core, as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
Quoted 6 lines
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
Best regards,
Tomasz
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 68 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 67 lines · Mike Turquette
Quoted 45 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 35 lines · Tomasz Figa
Quoted 34 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 22 lines · Tomasz Figa
Quoted 21 lines
Quoted 20 lines
Quoted 5 lines
Quoted 4 lines
Also I would make this option required. Use a dummy clock for
mux
inputs that are grounded for a specific SoC.Quoted 10 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input clocks
not
defined by the SoC.Quoted 5 lines
Quoted 2 lines
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 7 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings
for "fixed-clock" and co friends describe relatively simple preconfigured clocks.Quoted 6 lines
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator
implementation. A central one could be registered by the clock core, as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 7 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in drivers/clk/clk.c instead of having everyone open-code it.
As far as specifying a dummy clock in DT? I dunno. DT should describe real hardware so there isn't much use for a dummy clock.
I'm guessing one of the reasons for such a clock are drivers do not honor the clk.h api and they freak out when clk_get gives them a NULL pointer?
Regards,
Mike
Quoted 3 lines
Best regards,
Tomasz
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 80 lines · Mike Turquette
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 68 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 67 lines · Mike Turquette
Quoted 45 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 35 lines · Tomasz Figa
Quoted 34 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 22 lines · Tomasz Figa
Quoted 21 lines
Quoted 20 lines
Quoted 5 lines
Quoted 4 lines
Also I would make this option required. Use a dummy clock for
mux
inputs that are grounded for a specific SoC.Quoted 10 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input clocks
not
defined by the SoC.Quoted 5 lines
Quoted 2 lines
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 7 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings
for "fixed-clock" and co friends describe relatively simple preconfigured clocks.Quoted 6 lines
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator
implementation. A central one could be registered by the clock core, as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 7 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 7 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe real hardware so there isn't much use for a dummy clock.
Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 4 lines
I'm guessing one of the reasons for such a clock are drivers do not honor the
clk.hapi and they freak out whenclk_getgives them a NULL pointer?
I'm not sure. Sascha, could you shed some light on the matter?
Thanks,
Mark.
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 90 lines · Mark Rutland
Quoted 80 lines · Mike Turquette
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 68 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 67 lines · Mike Turquette
Quoted 45 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 35 lines · Tomasz Figa
Quoted 34 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 22 lines · Tomasz Figa
Quoted 21 lines
Quoted 20 lines
Quoted 5 lines
Quoted 4 lines
Also I would make this option required. Use a dummy clock for
mux
inputs that are grounded for a specific SoC.Quoted 10 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input clocks
not
defined by the SoC.Quoted 5 lines
Quoted 2 lines
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 7 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings
for "fixed-clock" and co friends describe relatively simple preconfigured clocks.Quoted 6 lines
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator
implementation. A central one could be registered by the clock core, as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 7 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 7 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe real hardware so there isn't much use for a dummy clock.
Quoted 8 lines
Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 4 lines
I'm guessing one of the reasons for such a clock are drivers do not honor the
clk.hapi and they freak out whenclk_getgives them a NULL pointer?I'm not sure. Sascha, could you shed some light on the matter?
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish between an unconnected and an erroneous clock?
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoting Sascha Hauer (2013-08-22 14:00:35)
Quoted 100 lines · Mark Rutland
Quoted 90 lines · Mike Turquette
Quoted 80 lines
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 68 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 67 lines · Mike Turquette
Quoted 45 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 35 lines · Tomasz Figa
Quoted 34 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 22 lines · Tomasz Figa
Quoted 21 lines
Quoted 20 lines
Quoted 5 lines
Quoted 4 lines
Also I would make this option required. Use a dummy
clock for
mux
inputs that are grounded for a specific SoC.Quoted 10 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input clocks
not
defined by the SoC.Quoted 5 lines
Quoted 2 lines
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 7 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings
for "fixed-clock" and co friends describe relatively simple preconfigured clocks.Quoted 6 lines
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator
implementation. A central one could be registered by the clock core, as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 7 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 7 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe real hardware so there isn't much use for a dummy clock.
Quoted 8 lines
Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 4 lines
I'm guessing one of the reasons for such a clock are drivers do not honor the
clk.hapi and they freak out whenclk_getgives them a NULL pointer?I'm not sure. Sascha, could you shed some light on the matter?
Quoted 8 lines
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
You could use a dummy clk for the Linux implementation, but the downside is that a dummy clock has a rate of 0 always and a your clocks likely have non-zero rates.
It is probably better for you define a clock which only implements the .recalc_rate callback. If the rate of this clock changes without Linux having knowledge of it you can use the CLK_GET_RATE_NOCACHE flag.
Quoted 5 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Again you could use a dummy clock for this OR a fixed-rate clock with a rate of zero from the perspective of the Linux implementation.
Do you think it worthwhile to have a DT binding for a grounded clock? That is not an entirely uncommon case.
Quoted 5 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish between an unconnected and an erroneous clock?
Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from clk_get?
Regards,
Mike
Quoted 8 lines
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 8 lines · On Thursday 22 of August 2013 15:43:31 Mike Turquette wrote:
Quoting Sascha Hauer (2013-08-22 14:00:35)
Quoted 6 lines · Mark Rutland
Quoted 5 lines · Mike Turquette
Quoted 4 lines
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 2 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 1 line
On Tue, Aug 20, 2013 at 01:06:25AM +0100, Mike Turquette
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 1 line
On Sat, Aug 17, 2013 at 04:17:18PM +0100, Tomasz Figa
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Saturday 17 of August 2013 16:53:16 Sascha Hauer
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Sat, Aug 17, 2013 at 02:28:04PM +0200, Tomasz Figa
Quoted 117 lines · wrote:
Quoted 108 lines
Quoted 100 lines
Quoted 89 lines
Quoted 77 lines
Quoted 77 lines
Quoted 51 lines
Quoted 44 lines
Quoted 36 lines
Quoted 27 lines
Quoted 27 lines
Quoted 26 lines
Quoted 20 lines
Also I would make this option required. Use a
dummy
clock for
mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't
defined in
imx6q-clk.txt,
so in most cases we can't provide a phandle for
them, eg:
spdif_ext.
I think it's a bit hard to force it to be
'required'. An
'optional'
looks more flexible to me and a default one is
ensured
even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input
clocks
not
defined by the SoC.Quoted 6 lines
Quoted 3 lines
Where does this assumption come from? Is it
documented
anywhere?This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
Quoted 7 lines
I guess we need some discussion on dummy clocks vs skipped clocks.
I think we want some consistency on this, don't we?If we really need a dummy clock, then we might also want a generic
way to specify it.Quoted 6 lines
What do we actually mean by a "dummy clock"? We already have
bindings
for "fixed-clock" and co friends describe relatively simple
preconfigured clocks.Quoted 9 lines
Some platforms have a fake clock which defines noops callbacks and
basically doesn't do anything. This is analogous to the dummy
regulator
implementation. A central one could be registered by the clock core,
as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in
Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 8 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 8 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe
real hardware so there isn't much use for a dummy clock.Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 7 lines
Quoted 5 lines
I'm guessing one of the reasons for such a clock are drivers do not
honor theclk.hapi and they freak out whenclk_getgives them a NULL
pointer?I'm not sure. Sascha, could you shed some light on the matter?
Quoted 8 lines
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
Quoted 7 lines
You could use a dummy clk for the Linux implementation, but the downside is that a dummy clock has a rate of 0 always and a your clocks likely have non-zero rates.
It is probably better for you define a clock which only implements the .recalc_rate callback. If the rate of this clock changes without Linux having knowledge of it you can use the
CLK_GET_RATE_NOCACHEflag.
I doubt that rate of a dummy clock could ever change... unless it is a rather smart dummy.
Quoted 10 lines
Quoted 4 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Again you could use a dummy clock for this OR a fixed-rate clock with a rate of zero from the perspective of the Linux implementation.
Do you think it worthwhile to have a DT binding for a grounded clock? That is not an entirely uncommon case.
Well, how would that differ from skipping a clock from clocks list, i.e. not specifying it in clock-names and clocks properties?
Quoted 8 lines
Quoted 5 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish
between an unconnected and an erroneous clock?Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from
clk_get?
Hmm, in theory, a driver could want to distinguish an error case (e.g. clock specified, but there is a problem with it) from no clock (e.g. clock not specified in DT, because it is not available on particular board).
Best regards,
Tomasz
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 151 lines · Tomasz Figa
Quoted 8 lines · On Thursday 22 of August 2013 15:43:31 Mike Turquette wrote:
Quoting Sascha Hauer (2013-08-22 14:00:35)
Quoted 6 lines · Mark Rutland
Quoted 5 lines · Mike Turquette
Quoted 4 lines
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 2 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 1 line
On Tue, Aug 20, 2013 at 01:06:25AM +0100, Mike Turquette
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 1 line
On Sat, Aug 17, 2013 at 04:17:18PM +0100, Tomasz Figa
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Saturday 17 of August 2013 16:53:16 Sascha Hauer
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Sat, Aug 17, 2013 at 02:28:04PM +0200, Tomasz Figa
Quoted 117 lines · wrote:
Quoted 108 lines
Quoted 100 lines
Quoted 89 lines
Quoted 77 lines
Quoted 77 lines
Quoted 51 lines
Quoted 44 lines
Quoted 36 lines
Quoted 27 lines
Quoted 27 lines
Quoted 26 lines
Also I would make this option required. Use a
dummy
clock for
mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't
defined in
imx6q-clk.txt,
so in most cases we can't provide a phandle for
them, eg:
spdif_ext.
I think it's a bit hard to force it to be
'required'. An
'optional'
looks more flexible to me and a default one is
ensured
even if
it's
missing.<&clks 0> is the dummy clock. This can be used for
all input
clocks
not
defined by the SoC.Quoted 6 lines
Quoted 3 lines
Where does this assumption come from? Is it
documented
anywhere?This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
Quoted 7 lines
I guess we need some discussion on dummy clocks vs skipped clocks.
I think we want some consistency on this, don't we?If we really need a dummy clock, then we might also want a generic
way to specify it.Quoted 6 lines
What do we actually mean by a "dummy clock"? We already have
bindings
for "fixed-clock" and co friends describe relatively simple
preconfigured clocks.Quoted 9 lines
Some platforms have a fake clock which defines noops callbacks and
basically doesn't do anything. This is analogous to the dummy
regulator
implementation. A central one could be registered by the clock core,
as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in
Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 8 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 8 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe
real hardware so there isn't much use for a dummy clock.Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 7 lines
Quoted 5 lines
I'm guessing one of the reasons for such a clock are drivers do not
honor theclk.hapi and they freak out whenclk_getgives them a NULL
pointer?I'm not sure. Sascha, could you shed some light on the matter?
Quoted 8 lines
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
Quoted 7 lines
You could use a dummy clk for the Linux implementation, but the downside is that a dummy clock has a rate of 0 always and a your clocks likely have non-zero rates.
It is probably better for you define a clock which only implements the .recalc_rate callback. If the rate of this clock changes without Linux having knowledge of it you can use the
CLK_GET_RATE_NOCACHEflag.I doubt that rate of a dummy clock could ever change... unless it is a rather smart dummy.
Quoted 5 lines
Quoted 4 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Quoted 8 lines
Quoted 5 lines
Again you could use a dummy clock for this OR a fixed-rate clock with a rate of zero from the perspective of the Linux implementation.
Do you think it worthwhile to have a DT binding for a grounded clock? That is not an entirely uncommon case.
Well, how would that differ from skipping a clock from clocks list, i.e. not specifying it in clock-names and clocks properties?
The difference is that you can successfully grab it in your driver.
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish
between an unconnected and an erroneous clock?
Quoted 6 lines
Quoted 2 lines
Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from
clk_get?Hmm, in theory, a driver could want to distinguish an error case (e.g. clock specified, but there is a problem with it) from no clock (e.g. clock not specified in DT, because it is not available on particular board).
Yes, that's what I meant. To illustrate the problem for this driver:
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) {
sprintf(tmp, "rxtx%d", i);
clk = devm_clk_get(&pdev->dev, tmp);
if (IS_ERR(clk)) {
/*
* This can either mean this clock is not wired
* up (skipped in the devicetree, *or* it is wired
* up, but there went something wrong requesting it.
* We can only ignore this error.
*/
}
}This could be solved by always specifying all input clocks in the devicetree.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 155 lines · Sascha Hauer
Quoted 154 lines · Tomasz Figa
Quoted 8 lines · On Thursday 22 of August 2013 15:43:31 Mike Turquette wrote:
Quoting Sascha Hauer (2013-08-22 14:00:35)
Quoted 6 lines · Mark Rutland
Quoted 5 lines · Mike Turquette
Quoted 4 lines
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 2 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 1 line
On Tue, Aug 20, 2013 at 01:06:25AM +0100, Mike Turquette
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 1 line
On Sat, Aug 17, 2013 at 04:17:18PM +0100, Tomasz Figa
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Saturday 17 of August 2013 16:53:16 Sascha Hauer
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Sat, Aug 17, 2013 at 02:28:04PM +0200, Tomasz Figa
Quoted 117 lines · wrote:
Quoted 108 lines
Quoted 100 lines
Quoted 89 lines
Quoted 77 lines
Quoted 77 lines
Quoted 51 lines
Quoted 44 lines
Quoted 36 lines
Quoted 27 lines
Quoted 27 lines
Also I would make this option required. Use a
dummy
clock for
mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't
defined in
imx6q-clk.txt,
so in most cases we can't provide a phandle for
them, eg:
spdif_ext.
I think it's a bit hard to force it to be
'required'. An
'optional'
looks more flexible to me and a default one is
ensured
even if
it's
missing.<&clks 0> is the dummy clock. This can be used for
all input
clocks
not
defined by the SoC.Quoted 6 lines
Quoted 3 lines
Where does this assumption come from? Is it
documented
anywhere?This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
Quoted 7 lines
I guess we need some discussion on dummy clocks vs skipped clocks.
I think we want some consistency on this, don't we?If we really need a dummy clock, then we might also want a generic
way to specify it.Quoted 6 lines
What do we actually mean by a "dummy clock"? We already have
bindings
for "fixed-clock" and co friends describe relatively simple
preconfigured clocks.Quoted 9 lines
Some platforms have a fake clock which defines noops callbacks and
basically doesn't do anything. This is analogous to the dummy
regulator
implementation. A central one could be registered by the clock core,
as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in
Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 8 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 8 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe
real hardware so there isn't much use for a dummy clock.Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 7 lines
Quoted 5 lines
I'm guessing one of the reasons for such a clock are drivers do not
honor theclk.hapi and they freak out whenclk_getgives them a NULL
pointer?I'm not sure. Sascha, could you shed some light on the matter?
Quoted 8 lines
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
Quoted 7 lines
You could use a dummy clk for the Linux implementation, but the downside is that a dummy clock has a rate of 0 always and a your clocks likely have non-zero rates.
It is probably better for you define a clock which only implements the .recalc_rate callback. If the rate of this clock changes without Linux having knowledge of it you can use the
CLK_GET_RATE_NOCACHEflag.I doubt that rate of a dummy clock could ever change... unless it is a rather smart dummy.
Quoted 8 lines
Quoted 4 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Again you could use a dummy clock for this OR a fixed-rate clock with a rate of zero from the perspective of the Linux implementation.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Do you think it worthwhile to have a DT binding for a grounded clock? That is not an entirely uncommon case.
Well, how would that differ from skipping a clock from clocks list, i.e. not specifying it in clock-names and clocks properties?
The difference is that you can successfully grab it in your driver.
That's a driver-specific issue. The driver knows best which clocks it can live without (if it's poking only a subset of the hardware, it may not need some just yet, but could for extended functionality in future when support is extended), and could assign a dummy to those clocks it knows it doesn't need that aren't described. That doesn't need to be in the dt, and shouldn't be, because it's OS and driver specific.
Quoted 15 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish
between an unconnected and an erroneous clock?Quoted 6 lines
Quoted 2 lines
Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from
clk_get?Hmm, in theory, a driver could want to distinguish an error case (e.g. clock specified, but there is a problem with it) from no clock (e.g. clock not specified in DT, because it is not available on particular board).
Quoted 6 lines
Yes, that's what I meant. To illustrate the problem for this driver:
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) { sprintf(tmp, "rxtx%d", i); clk = devm_clk_get(&pdev->dev, tmp); if (IS_ERR(clk)) {
[...]
/*
* ERR_PTR(-ENOENT) returned when clock not
* present in the dt (i.e. not wired up). We can
* live without this clock, so assign a dummy
* (NULL) to simplify the rest of the code. If
* the clock is present but something else went
* wrong, we'll get a different ERR_PTR value
* and actually fail.
*/
if (clk == ERR_PTR(-ENOENT)
clk = NULL;
Quoted 5 lines
} }This could be solved by always specifying all input clocks in the devicetree.
As far as I can see, the above is sufficient, and leaves the knowledge of skippable clocks in the driver, where I believe it should be.
Thanks,
Mark.
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 207 lines · Mark Rutland
Quoted 155 lines · Sascha Hauer
Quoted 154 lines · Tomasz Figa
Quoted 8 lines · On Thursday 22 of August 2013 15:43:31 Mike Turquette wrote:
Quoting Sascha Hauer (2013-08-22 14:00:35)
Quoted 6 lines · Mark Rutland
Quoted 5 lines · Mike Turquette
Quoted 4 lines
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 2 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 1 line
On Tue, Aug 20, 2013 at 01:06:25AM +0100, Mike Turquette
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 1 line
On Sat, Aug 17, 2013 at 04:17:18PM +0100, Tomasz Figa
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Saturday 17 of August 2013 16:53:16 Sascha Hauer
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Sat, Aug 17, 2013 at 02:28:04PM +0200, Tomasz Figa
Quoted 117 lines · wrote:
Quoted 108 lines
Quoted 100 lines
Quoted 89 lines
Quoted 77 lines
Quoted 77 lines
Quoted 51 lines
Quoted 44 lines
Quoted 36 lines
Quoted 33 lines
Also I would make this option required. Use a
dummy
clock for
mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't
defined in
imx6q-clk.txt,
so in most cases we can't provide a phandle for
them, eg:
spdif_ext.
I think it's a bit hard to force it to be
'required'. An
'optional'
looks more flexible to me and a default one is
ensured
even if
it's
missing.<&clks 0> is the dummy clock. This can be used for
all input
clocks
not
defined by the SoC.Where does this assumption come from? Is it
documented
anywhere?This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
Quoted 7 lines
I guess we need some discussion on dummy clocks vs skipped clocks.
I think we want some consistency on this, don't we?If we really need a dummy clock, then we might also want a generic
way to specify it.Quoted 6 lines
What do we actually mean by a "dummy clock"? We already have
bindings
for "fixed-clock" and co friends describe relatively simple
preconfigured clocks.Quoted 9 lines
Some platforms have a fake clock which defines noops callbacks and
basically doesn't do anything. This is analogous to the dummy
regulator
implementation. A central one could be registered by the clock core,
as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in
Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 8 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 8 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe
real hardware so there isn't much use for a dummy clock.Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 7 lines
Quoted 5 lines
I'm guessing one of the reasons for such a clock are drivers do not
honor theclk.hapi and they freak out whenclk_getgives them a NULL
pointer?I'm not sure. Sascha, could you shed some light on the matter?
Quoted 8 lines
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
Quoted 7 lines
You could use a dummy clk for the Linux implementation, but the downside is that a dummy clock has a rate of 0 always and a your clocks likely have non-zero rates.
It is probably better for you define a clock which only implements the .recalc_rate callback. If the rate of this clock changes without Linux having knowledge of it you can use the
CLK_GET_RATE_NOCACHEflag.I doubt that rate of a dummy clock could ever change... unless it is a rather smart dummy.
Quoted 8 lines
Quoted 4 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Again you could use a dummy clock for this OR a fixed-rate clock with a rate of zero from the perspective of the Linux implementation.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Do you think it worthwhile to have a DT binding for a grounded clock? That is not an entirely uncommon case.
Well, how would that differ from skipping a clock from clocks list, i.e. not specifying it in clock-names and clocks properties?
The difference is that you can successfully grab it in your driver.
That's a driver-specific issue. The driver knows best which clocks it can live without (if it's poking only a subset of the hardware, it may not need some just yet, but could for extended functionality in future when support is extended), and could assign a dummy to those clocks it knows it doesn't need that aren't described. That doesn't need to be in the dt, and shouldn't be, because it's OS and driver specific.
Quoted 15 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish
between an unconnected and an erroneous clock?Quoted 6 lines
Quoted 2 lines
Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from
clk_get?Hmm, in theory, a driver could want to distinguish an error case (e.g. clock specified, but there is a problem with it) from no clock (e.g. clock not specified in DT, because it is not available on particular board).
Quoted 6 lines
Yes, that's what I meant. To illustrate the problem for this driver:
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) { sprintf(tmp, "rxtx%d", i); clk = devm_clk_get(&pdev->dev, tmp); if (IS_ERR(clk)) {[...]
/*
*ERR_PTR(-ENOENT)returned when clock not
* present in the dt (i.e. not wired up). We can
* live without this clock, so assign a dummy
* (NULL) to simplify the rest of the code. If
* the clock is present but something else went
* wrong, we'll get a differentERR_PTRvalue
* and actually fail.
*/
if (clk ==ERR_PTR(-ENOENT)
clk = NULL;
Quoted 8 lines
Quoted 5 lines
} }This could be solved by always specifying all input clocks in the devicetree.
As far as I can see, the above is sufficient, and leaves the knowledge of skippable clocks in the driver, where I believe it should be.
You miss my point. Once a clock is specified in the devicetree it is no longer optional. The driver currently can't find out whether a clock hasn't been specified (and it's ok that it's not there) or a clock has been specified, but some error prevents actually grabbing the clock (in which case the driver should bail out)
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [alsa-devel] [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
[trimming a bit of useless context]
Quoted 40 lines
Quoted 40 lines
Quoted 13 lines
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish
between an unconnected and an erroneous clock?Quoted 6 lines
Quoted 2 lines
Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from
clk_get?Hmm, in theory, a driver could want to distinguish an error case (e.g. clock specified, but there is a problem with it) from no clock (e.g. clock not specified in DT, because it is not available on particular board).
Quoted 6 lines
Yes, that's what I meant. To illustrate the problem for this driver:
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) { sprintf(tmp, "rxtx%d", i); clk = devm_clk_get(&pdev->dev, tmp); if (IS_ERR(clk)) {[...]
/*
*ERR_PTR(-ENOENT)returned when clock not
* present in the dt (i.e. not wired up). We can
* live without this clock, so assign a dummy
* (NULL) to simplify the rest of the code. If
* the clock is present but something else went
* wrong, we'll get a differentERR_PTRvalue
* and actually fail.
*/
if (clk ==ERR_PTR(-ENOENT)
clk = NULL;Quoted 5 lines
} }This could be solved by always specifying all input clocks in the devicetree.
Quoted 8 lines
Quoted 2 lines
As far as I can see, the above is sufficient, and leaves the knowledge of skippable clocks in the driver, where I believe it should be.
You miss my point. Once a clock is specified in the devicetree it is no longer optional. The driver currently can't find out whether a clock hasn't been specified (and it's ok that it's not there) or a clock has been specified, but some error prevents actually grabbing the clock (in which case the driver should bail out)
Unless I've misunderstood, that's exactly what I was trying to implement above. As I understand it, what we want is:
* If a clock is not specified in the DT, but it's a clock that we know we can live without if not wired up, then continue along with a dummy clock (NULL). This could be changed to a different dummy, what exactly is needed is driver-specific.
* If a clock is not specified in the DT, but it's *not* an optional clock, then we must fail. Whether or not a clock is optional is knowledge only the driver can have.
* If a clock is specified in the DT, but we can't get it for some reason, fail.
* If a clock is specified in the DT, and we get it, use it.
I see we might also get PTR_ERR(-ENOENT) indirectly from __of_parse_phandle_with_args, if the "clocks" property isn't present (but clock-names is), or we're given the empty phandle. The empty phandle case is arguable, but it would be possible to add a check for the clocks property in of_clk_get_by_name early on where we could return -EINVAL to prevent that being a problem.
Otherwise, it's trivial to add a function to explicitly test for this case (see below). I don't see that we need to leak what is a Linux issue into the dt.
Thanks,
Mark.
---->8----
Quoted 1 line
From
f0d46f36426ded4ba3609d79664888852f9925e2Mon Sep 17 00:00:00 2001
From: Mark Rutland <[email protected]>
Date: Fri, 23 Aug 2013 15:46:33 +0100
Subject: [PATCH] clk: add of_clk_is_specified
There's currently no way to perfectly distinguish between an of_clk_get_by_name that failed because a clock was not provided in clock-names, or for some other reason (e.g. the clocks property itself was missing). This is problematic for drivers for some pieces of hardware that have optional clocks -- those which must be used if wired, but may not be wired in all cases.
This patch adds a new function of_clk_is_specified, which may be used to distinguish these cases.
--- drivers/clk/clkdev.c | 11 +++++++++++ include/linux/clk.h | 5 +++++ 2 files changed, 16 insertions(+)
drivers/clk/clkdev.c +11 -0
@@ -91,6 +91,17 @@ struct clk *of_clk_get_by_name(struct device_node *np, const char *name) return clk; }EXPORT_SYMBOL (of_clk_get_by_name); + +/** +* +* of_clk_is_specified - Test if a clock was provided by name in a device node +* @np: pointer to the clock consumer node +* @name: name of the consumer's clock input. Not NULL. +*/ +bool of_clk_is_specified (struct device_node *np,const char *name) +{ +return of_property_match_string (np,"clock-names" , name) >=0 ; +}#endif /*
include/linux/clk.h +5 -0
@@ -368,6 +368,7 @@ struct of_phandle_args;struct clk *of_clk_get (struct device_node *np,int index);struct clk *of_clk_get_by_name (struct device_node *np,const char *name);struct clk *of_clk_get_from_provider (struct of_phandle_args *clkspec); +bool of_clk_is_specified (struct device_node *np,const char *name);#else static inline struct clk *of_clk_get (struct device_node *np,int index) {
@@ -378,6 +379,10 @@ static inline struct clk *of_clk_get_by_name(struct device_node *np, {return ERR_PTR (-ENOENT ); } +static bool of_clk_is_specified (struct device_node *np,const char *name) +{ +return false; +}#endif #endif
Signature · 1 line
1.8.1.1
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
In reply to Sascha HauerQuoting Sascha Hauer (2013-08-23 07:01:28)
Quoted 214 lines · Mark Rutland
Quoted 213 lines · Sascha Hauer
Quoted 155 lines · Tomasz Figa
Quoted 154 lines · On Thursday 22 of August 2013 15:43:31 Mike Turquette wrote:
Quoted 8 lines
Quoting Sascha Hauer (2013-08-22 14:00:35)
Quoted 6 lines · Mark Rutland
Quoted 5 lines · Mike Turquette
Quoted 4 lines
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 2 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 1 line
On Tue, Aug 20, 2013 at 01:06:25AM +0100, Mike Turquette
Quoted 3 lines · wrote:
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 1 line
On Sat, Aug 17, 2013 at 04:17:18PM +0100, Tomasz Figa
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Saturday 17 of August 2013 16:53:16 Sascha Hauer
Quoted 1 line · wrote:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
On Sat, Aug 17, 2013 at 02:28:04PM +0200, Tomasz Figa
Quoted 117 lines · wrote:
Quoted 108 lines
Quoted 100 lines
Quoted 89 lines
Quoted 77 lines
Quoted 77 lines
Quoted 51 lines
Quoted 44 lines
Quoted 43 lines
Also I would make this option required. Use a
dummy
clock for
mux
inputs that are grounded for a specific SoC.Some clocks are not from CCM and we haven't
defined in
imx6q-clk.txt,
so in most cases we can't provide a phandle for
them, eg:
spdif_ext.
I think it's a bit hard to force it to be
'required'. An
'optional'
looks more flexible to me and a default one is
ensured
even if
it's
missing.<&clks 0> is the dummy clock. This can be used for
all input
clocks
not
defined by the SoC.Where does this assumption come from? Is it
documented
anywhere?This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs
skipped clocks.
I think we want some consistency on this, don't we?If we really need a dummy clock, then we might also want
a generic
way to specify it.Quoted 6 lines
What do we actually mean by a "dummy clock"? We already have
bindings
for "fixed-clock" and co friends describe relatively simple
preconfigured clocks.Quoted 9 lines
Some platforms have a fake clock which defines noops callbacks and
basically doesn't do anything. This is analogous to the dummy
regulator
implementation. A central one could be registered by the clock core,
as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in
Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 8 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 8 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe
real hardware so there isn't much use for a dummy clock.Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 7 lines
Quoted 5 lines
I'm guessing one of the reasons for such a clock are drivers do not
honor theclk.hapi and they freak out whenclk_getgives them a NULL
pointer?I'm not sure. Sascha, could you shed some light on the matter?
Quoted 8 lines
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
Quoted 7 lines
You could use a dummy clk for the Linux implementation, but the downside is that a dummy clock has a rate of 0 always and a your clocks likely have non-zero rates.
It is probably better for you define a clock which only implements the .recalc_rate callback. If the rate of this clock changes without Linux having knowledge of it you can use the
CLK_GET_RATE_NOCACHEflag.I doubt that rate of a dummy clock could ever change... unless it is a rather smart dummy.
Quoted 8 lines
Quoted 4 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Again you could use a dummy clock for this OR a fixed-rate clock with a rate of zero from the perspective of the Linux implementation.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Do you think it worthwhile to have a DT binding for a grounded clock? That is not an entirely uncommon case.
Well, how would that differ from skipping a clock from clocks list, i.e. not specifying it in clock-names and clocks properties?
The difference is that you can successfully grab it in your driver.
That's a driver-specific issue. The driver knows best which clocks it can live without (if it's poking only a subset of the hardware, it may not need some just yet, but could for extended functionality in future when support is extended), and could assign a dummy to those clocks it knows it doesn't need that aren't described. That doesn't need to be in the dt, and shouldn't be, because it's OS and driver specific.
Quoted 15 lines
Quoted 8 lines
Quoted 8 lines
Quoted 7 lines
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish
between an unconnected and an erroneous clock?Quoted 6 lines
Quoted 2 lines
Sorry, I don't follow this last question. Do you mean how to distinguish based on the value returned from
clk_get?Hmm, in theory, a driver could want to distinguish an error case (e.g. clock specified, but there is a problem with it) from no clock (e.g. clock not specified in DT, because it is not available on particular board).
Quoted 6 lines
Yes, that's what I meant. To illustrate the problem for this driver:
for (i = 0; i < STC_TXCLK_SRC_MAX; i++) { sprintf(tmp, "rxtx%d", i); clk = devm_clk_get(&pdev->dev, tmp); if (IS_ERR(clk)) {[...]
/*
*ERR_PTR(-ENOENT)returned when clock not
* present in the dt (i.e. not wired up). We can
* live without this clock, so assign a dummy
* (NULL) to simplify the rest of the code. If
* the clock is present but something else went
* wrong, we'll get a differentERR_PTRvalue
* and actually fail.
*/
if (clk ==ERR_PTR(-ENOENT)
clk = NULL;Quoted 5 lines
} }This could be solved by always specifying all input clocks in the devicetree.
Quoted 8 lines
Quoted 2 lines
As far as I can see, the above is sufficient, and leaves the knowledge of skippable clocks in the driver, where I believe it should be.
You miss my point. Once a clock is specified in the devicetree it is no longer optional. The driver currently can't find out whether a clock hasn't been specified (and it's ok that it's not there) or a clock has been specified, but some error prevents actually grabbing the clock (in which case the driver should bail out)
Seems like the regulator framework is solving this with the new regulator_get_optional() call. This leaves the optional-versus-not-optional logic up to the driver.
Regards,
Mike
Quoted 9 lines
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Mark Brown
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 3 lines · Mike Turquette
Seems like the regulator framework is solving this with the new
regulator_get_optional()call. This leaves the optional-versus-not-optional logic up to the driver.
That is possibly for a slightly different case but perhaps not...
The problem we've got with the regulator API is that an awful lot of regulators are always on and people generally don't want to go and hook everything up, especially when drivers don't yet have regulator support. This means that we end up with lots of complaints about having to add regultors and lots of pain adding regulator support to widely used devices, or drivers that just ignore errors which is not awesome.
We don't want to provide dummies since if the driver genuinely does have optional regulators they tend to break them so we're adding that call to allow the core to know if it can just provide a stub and assume the board data was lazy.
My impression with clocks on most platforms is that there are fewer of this sort of always on clock, though that said I know there has been a bit of an issue with some of the IP clocks when IPs are used in SoCs from less power sensitive environments that don't bother implementing gating even in hardware.
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
In reply to Sascha HauerQuoted 98 lines · Sascha Hauer
Quoted 97 lines · Mark Rutland
Quoted 80 lines · Mike Turquette
Quoting Tomasz Figa (2013-08-21 14:34:55)
Quoted 68 lines · On Wednesday 21 of August 2013 09:50:15 Mark Rutland wrote:
Quoted 67 lines · Mike Turquette
Quoted 45 lines
Quoting Mark Rutland (2013-08-19 02:35:43)
Quoted 35 lines · Tomasz Figa
Quoted 34 lines · On Saturday 17 of August 2013 16:53:16 Sascha Hauer wrote:
Quoted 22 lines · Tomasz Figa
Quoted 21 lines
Quoted 20 lines
Quoted 5 lines
Quoted 4 lines
Also I would make this option required. Use a dummy
clock for
mux
inputs that are grounded for a specific SoC.Quoted 10 lines
Some clocks are not from CCM and we haven't defined in imx6q-clk.txt,
so in most cases we can't provide a phandle for them, eg:spdif_ext.
I think it's a bit hard to force it to be 'required'. An 'optional'
looks more flexible to me and a default one is ensured even if
it's
missing.<&clks 0> is the dummy clock. This can be used for all input clocks
not
defined by the SoC.Quoted 5 lines
Quoted 2 lines
Where does this assumption come from? Is it documented anywhere?
This is how all i.MX clock bindings currently are. See
Documentation/devicetree/bindings/clock/imx*-clock.txtOK, thanks.
I guess we need some discussion on dummy clocks vs skipped clocks. I think we want some consistency on this, don't we?
Quoted 7 lines
Quoted 2 lines
If we really need a dummy clock, then we might also want a generic way to specify it.
What do we actually mean by a "dummy clock"? We already have bindings
for "fixed-clock" and co friends describe relatively simple preconfigured clocks.Quoted 6 lines
Some platforms have a fake clock which defines noops callbacks and basically doesn't do anything. This is analogous to the dummy regulator
implementation. A central one could be registered by the clock core, as
is done by the regulator core.When you say some platforms, you presumably mean the platform code in Linux? A dummy clock sounds like a completely Linux-specific abstraction rather than a description of the hardware, and I don't see why we need that in the DT:
* If a clock is wired up and running (as presumably the dummy clock is), then surely it's a fixed-clock (it's running, we and we have no control over it, but we presumably know its rate) and can be described as such?
* If no clock is wired up, then we should be able to describe that. If a driver believes that a clock is required when it isn't (for some level of functionality), then that driver should be fixed up to support the clock as being optional.
Quoted 7 lines
Quoted 1 line
Am I missing something?
I second that.
Moreover, I don't think that device tree should deal with dummy anything. It should be able to describe hardware that is available on given system, not list what hardware is not available.
I wasn't clear. The dummy clock IS a completely Linux-specific abstraction.
Quoted 7 lines
I'm not advocating a dummy clock in DT. I am advocating consolidation of the implementation of a clock that does nothing into the clock core. This code could easily live in
drivers/clk/clk.cinstead of having everyone open-code it.As far as specifying a dummy clock in DT? I dunno. DT should describe real hardware so there isn't much use for a dummy clock.
Sorry, I misunderstood. Good to hear we're on the same page :)
Quoted 4 lines
I'm guessing one of the reasons for such a clock are drivers do not honor the
clk.hapi and they freak out whenclk_getgives them a NULL pointer?
Quoted 7 lines
Quoted 1 line
I'm not sure. Sascha, could you shed some light on the matter?
The original reason introducing the dummy clocks in the i.MX dtbs was to provide devices a clock which the driver requests but is not software controllable. We often have the case where the same devices are on several SoCs, but not on all of them all clocks have a bit to en/disable them.
So those clocks are always on at some fixed rate?
Quoted 3 lines
Anyway, to accomplish this we don't need dummy clocks. We can just describe the real clocks.
Ok.
Quoted 10 lines
BTW with the S/PDIF core on which not all mux inputs are connected to actual clocks we could also describe the unconnected inputs as ground clocks with rate 0. This way we describe something which is really there instead of dummy clocks ;)
Background to why it might be a good idea to connect a ground clock to the unconnected input pins is that a driver has a chance to successfully grab all clocks. Otherwise how does the driver distinguish between an unconnected and an erroneous clock?
Surely the presence of a name in "clock-names" tells you that a clock is connected, and if not listed it's not connected? If we don't have the infrastructure for telling apart unconnected clocks from inability to enable/configure clocks, that's a Linux issue rather than something that should be hacked up in the dt.
Thanks,
Mark.
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
In reply to Sascha HauerQuoted 39 lines · On Friday 16 of August 2013 10:56:32 Sascha Hauer wrote:
Quoted 27 lines · Nicolin Chen
Hi Sascha,
Thank you for the detailed comments.
Quoted 8 lines · Sascha Hauer
Which of them the driver should use is configuration and thus normally
should *not* be described in the devicetree. However, there may be no
good way for the driver to know which clock to use in which case. There
may be additional board requirements which are unknown to the driver. So in this case it might be valid to put the informationQuoted 8 lines
which clock to use into the devicetree. But be aware that from the moment you put this information into the devicetree the driver is no longer free to chose the best clock, even if in future we find a good way to automatically guess the best clock. Do you have some insights in which case I would use which input clock? Is this only about which clock has the best suitable input frequency or is this also about synchronization of the audio signal with some other unit?
I understand. What I'm thinking now is to let the driver find the best clock source for tx clock and a correspond divisor like this:
"tx<0-8>" Optional Tx clock source for spdif playback.
Quoted 10 lines
If absent, will use core clock. The index from 0 to 8 is identical to the clock source list described in
TxClk_Sourcebit of register STC. Multiple clock source are allowed for this tx clock source. The driver will select one source from them for each supported sample rate according to the clock rates of these provided clock sources.
Quoted 4 lines
You mean tx<0-7>.
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Why do you need a dummy clock?
The driver can simply try to grab all the possible clocks and discard those that failed, so you can just keep those grounded clocks unspecified.
Best regards,
Tomasz
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 9 lines · Tomasz Figa
Quoted 4 lines
You mean tx<0-7>.
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Why do you need a dummy clock?
The driver can simply try to grab all the possible clocks and discard those that failed, so you can just keep those grounded clocks unspecified.
We don't need dummy clocks. My motivation saying this that I was afraid people try to configure the driver by skipping the clocks they don't want from the devicetree.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 6 lines · On Saturday 17 of August 2013 17:00:02 Sascha Hauer wrote:
Quoted 5 lines · Tomasz Figa
Quoted 4 lines
You mean tx<0-7>.
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Quoted 8 lines
Quoted 5 lines
Why do you need a dummy clock?
The driver can simply try to grab all the possible clocks and discard those that failed, so you can just keep those grounded clocks unspecified.
We don't need dummy clocks. My motivation saying this that I was afraid people try to configure the driver by skipping the clocks they don't want from the devicetree.
I'm not really sure if the same abuse couldn't be easily achieved by putting dummy clocks in place of those skipped clocks.
Adding a note in binding documentation that says that all clocks that are fed to the IP shall be specified should be fine IMHO.
Best regards,
Tomasz
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 12 lines · Tomasz Figa
Quoted 11 lines · On Saturday 17 of August 2013 17:00:02 Sascha Hauer wrote:
Quoted 10 lines · Tomasz Figa
Quoted 4 lines
You mean tx<0-7>.
Also I would make this option required. Use a dummy clock for mux inputs that are grounded for a specific SoC.
Why do you need a dummy clock?
The driver can simply try to grab all the possible clocks and discard those that failed, so you can just keep those grounded clocks unspecified.
Quoted 6 lines
Quoted 3 lines
We don't need dummy clocks. My motivation saying this that I was afraid people try to configure the driver by skipping the clocks they don't want from the devicetree.
I'm not really sure if the same abuse couldn't be easily achieved by putting dummy clocks in place of those skipped clocks.
That's right, yes.
Quoted 3 lines
Adding a note in binding documentation that says that all clocks that are fed to the IP shall be specified should be fine IMHO.
ok.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
In reply to Nicolin ChenHi Nicolin,
Quoted 3 lines · On Friday 16 of August 2013 12:43:31 Nicolin Chen wrote:
Hi Tomasz,
Thank you for the comments.
You're welcome.
Quoted 2 lines
I'll revise them in v6.
And below is my reply for you comments.
Thanks for your reply.
Quoted 9 lines · Tomasz Figa
Quoted 8 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt
Quoted 8 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +8
-0+ - clock-names : Includes the following entries: + name type comments + "core" Required The core clock of spdif controller + + "rx" Optional Rx clock source for spdif record. + If absent, will use core clock. + + "tx" Optional Tx clock source for spdif
playback.
Quoted 3 lines
Quoted 3 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt
Quoted 3 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +3
-0+ If absent, will use core clock. + + "tx-32000" Optional Tx clock source for 32000Hz sample
rate
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ playback. If absent, will use tx
clock.
Quoted 2 lines
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ + "tx-44100" Optional Tx clock source for 44100Hz sample
rate
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ playback. If absent, will use tx
clock.
Quoted 2 lines
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ + "tx-48000" Optional Tx clock source for 48000Hz sample
rate
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ playback. If absent, will use tx
clock.
Quoted 2 lines
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ + "src<0-7>" Optional Clock source list for tx and rx
clock
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ to look up their clock source
indexes.
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ This clock list should be
identical to
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ the list of TxClk_Source bit value
of
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ register SPDIF_STC. If absent or
failed
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ to look up, tx and rx clock would
then
Quoted 2 lines
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ ignore the "rx", "tx" "tx-32000", + "tx-44100", "tx-48000" clock
phandles
Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +1
-0+ and select the core clock as
default
Quoted 17 lines
Quoted 11 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt line 50
Quoted 1 line
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +1
-0+ tx and rx clock.I suspect a little abuse of clocks property here. From the description of "core" and "src<0-7>" clocks I assume that the IP can have up to 9 clock inputs - core clock and up to 8 extra source clocks. Is it correct?
If yes, this makes the "tx", "rx" and "tx-*" clocks describe configuration, not hardware. IMHO it should be up to the driver which source clocks to use for tx and rx channels and for each sampling rate.
First, you are right that all the properties you just commented are software configurations. And I got the point that device tree now can't allow any software configuration even if the actual hardware connection will depend on it.
Quoted 5 lines
If so, I would like to remove those abused clocks and also drop the unused clocks in src<0-7>, then just remain those needed clocks src. I think that can be plausible because there'll be no more clock abuse and the driver will be able to get the source index from the name 'src<num>'.
OK.
Quoted 5 lines
And you are right about the 9 clock inputs, just there're not only 9 inputs but also an extra external clock from S/PDIF transmitter via coaxial cable or optical fiber -- RxCLK. Please check the following list:
Quoted 14 lines
0000 if (DPLL Locked)
SPDIF_RxClkelse extal 0001 if (DPLL Locked)SPDIF_RxClkelsespdif_clk0010 if (DPLL Locked)SPDIF_RxClkelseasrc_clk0011 if (DPLL Locked)SPDIF_RxClkelsespdif_extclk0100 if (DPLL Locked)SPDIF_Rxclkelseesai_hckt0101extal_clk
0110spdif_clk
0111asrc_clk
1000spdif_extclk
1001esai_hckt
1010 if (DPLL Locked)SPDIF_RxClkelsemlb_clk1011 if (DPLL Locked)SPDIF_RxClkelsemlb_phy_clk1100mkb_clk
1101mlb_phy_clk
Could you explain what the above values are? If they are values written to a 4-bit mux that selects RX clock source, then all the 16 clocks should be specified from device tree, even if they are duplicated.
Are the clock names you used above names of clock inputs of the S/PDIF block or names of SoC-wide clocks?
Can the assignment of clock inputs change? For example on one SoC
0000 if (DPLL Locked) SPDIF_RxClk else extal_clk
0001 if (DPLL Locked) SPDIF_RxClk else spdif_clk
...
0101 extal_clk
0110 spdif_clk
...
and on another
0000 if (DPLL Locked) SPDIF_RxClk else spdif_clk
0001 if (DPLL Locked) SPDIF_RxClk else extal_clk
...
0101 extal_clk
0110 spdif_clk
...
(notice the swapped 0000 and 0001 inputs)
Same goes for the TX mux. If it is a 3-bit, 8-input mux, then it should be described in device tree separately, as it is different than the 4-bit, 16-input RX mux.
Quoted 3 lines
When (DPLL Locked) condition matches, the rx clock can ignore the 8 input clocks from clock mux then use the external one from a S/PDIF transmitter.
What happens if the "DPLL locked" condition doesn't match? When this can happen?
Quoted 13 lines
So for the below part:
Quoted 11 lines
Quoted 7 lines
Documentation/devicetree/bindings/sound/fsl,spdif.txt new file +3
-0+Optional properties: + + - rx-clksrc-lock: This is a boolean property. If present,
ClkSrc_Sel
bit + ofSPDIF_SRPCwould be set a clock source that cares DPLL locked
condition. +This again looks like software configuration, not hardware description.
Could you elaborate a bit more on meaning of this property?
Quoted 3 lines
I think the rx-clksrc-lock property should be included in DT as well, since it's exactly a available clock source for rx. But I guess I just need to figure out a better way or a more elaborated description.
I still don't understand the meaning of this property. Could you explain it please?
Best regards,
Tomasz
Sascha Hauer
maintainerRe: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 34 lines · Tomasz Figa
Hi Nicolin,
Quoted 10 lines
First, you are right that all the properties you just commented are software configurations. And I got the point that device tree now can't allow any software configuration even if the actual hardware connection will depend on it.
If so, I would like to remove those abused clocks and also drop the unused clocks in src<0-7>, then just remain those needed clocks src. I think that can be plausible because there'll be no more clock abuse and the driver will be able to get the source index from the name 'src<num>'.
OK.
Quoted 5 lines
And you are right about the 9 clock inputs, just there're not only 9 inputs but also an extra external clock from S/PDIF transmitter via coaxial cable or optical fiber -- RxCLK. Please check the following list:
Quoted 14 lines
0000 if (DPLL Locked)
SPDIF_RxClkelse extal 0001 if (DPLL Locked)SPDIF_RxClkelsespdif_clk0010 if (DPLL Locked)SPDIF_RxClkelseasrc_clk0011 if (DPLL Locked)SPDIF_RxClkelsespdif_extclk0100 if (DPLL Locked)SPDIF_Rxclkelseesai_hckt0101extal_clk
0110spdif_clk
0111asrc_clk
1000spdif_extclk
1001esai_hckt
1010 if (DPLL Locked)SPDIF_RxClkelsemlb_clk1011 if (DPLL Locked)SPDIF_RxClkelsemlb_phy_clk1100mkb_clk
1101mlb_phy_clk
Quoted 3 lines
Could you explain what the above values are? If they are values written to a 4-bit mux that selects RX clock source, then all the 16 clocks should be specified from device tree, even if they are duplicated.
The S/PDIF core can recover the clock for the tx signal from the rx signal. So if you have an S/PDIF input signal, then the DPLL will be locked and the SPDIF_RxClk can be used for tx. So the above are really 8 clocks and one "If DPLL locked, use it" bit.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Quoted 42 lines · On Saturday 17 of August 2013 17:14:09 Sascha Hauer wrote:
Quoted 36 lines · Tomasz Figa
Hi Nicolin,
Quoted 11 lines
First, you are right that all the properties you just commented are software configurations. And I got the point that device tree now can't allow any software configuration even if the actual hardware connection will depend on it.
If so, I would like to remove those abused clocks and also drop the unused clocks in src<0-7>, then just remain those needed clocks src. I think that can be plausible because there'll be no more clock abuse
and the driver will be able to get the source index from the name 'src<num>'.OK.
Quoted 5 lines
And you are right about the 9 clock inputs, just there're not only 9 inputs but also an extra external clock from S/PDIF transmitter via coaxial cable or optical fiber -- RxCLK. Please check the following list:
Quoted 14 lines
0000 if (DPLL Locked)
SPDIF_RxClkelse extal 0001 if (DPLL Locked)SPDIF_RxClkelsespdif_clk0010 if (DPLL Locked)SPDIF_RxClkelseasrc_clk0011 if (DPLL Locked)SPDIF_RxClkelsespdif_extclk0100 if (DPLL Locked)SPDIF_Rxclkelseesai_hckt0101extal_clk
0110spdif_clk
0111asrc_clk
1000spdif_extclk
1001esai_hckt
1010 if (DPLL Locked)SPDIF_RxClkelsemlb_clk1011 if (DPLL Locked)SPDIF_RxClkelsemlb_phy_clk1100mkb_clk
1101mlb_phy_clkQuoted 4 lines
Could you explain what the above values are? If they are values written to a 4-bit mux that selects RX clock source, then all the 16 clocks should be specified from device tree, even if they are duplicated.
Quoted 4 lines
The S/PDIF core can recover the clock for the tx signal from the rx signal. So if you have an S/PDIF input signal, then the DPLL will be locked and the
SPDIF_RxClkcan be used for tx. So the above are really 8 clocks and one "If DPLL locked, use it" bit.
Yes, I'm aware of this and the solution you proposed is fully acceptable, but it complicates the driver a bit.
If you look at the mux inputs above, you can see that there is no single bit that specifies "if DPLL locked, use it" mode. Instead the conditional clock sources are mixed with fixed clock sources, without a linear translation to 0-7 range, which would have to be hardcoded in the driver.
I guess it's a matter of preference, but if the IP has a RX clock selection mux that has 16 inputs, the natural representation in device tree that comes to my mind is 16 clocks - one for each input of the mux. One might choose to abstract this as 8 clocks, though, since each clock is duplicated.
In this particular case, the driver would have to know which mux inputs can use DPLL anyway, so some hardcoding in the driver is still going to take place, so I guess both solutions are equally right.
Best regards,
Tomasz
PATCH v5 2/2 ASoC: fsl: Add S/PDIF machine driver
In reply to Nicolin ChenAdd S/PDIF machine driver for Freescale i.MX series SoC.
--- .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 +++++ sound/soc/fsl/Kconfig | 11 ++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/imx-spdif.c | 134 ++++++++++++++++++++ 4 files changed, 176 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/imx-spdif.c
Documentation/devicetree/bindings/sound/imx-audio-spdif.txt new file +29 -0
@@ -0,0 +1,29 @@ +Freescale i.MX audio complex with S/PDIF transceiver + +Required properties: + + - compatible : "fsl,imx-audio-spdif" + + - model : The user-visible name of this sound complex + + - spdif-controller : The phandle of the i.MX S/PDIF controller + + +Optional properties: + + - spdif-transmitter : The phandle of the spdif-transmitter dummy codec + + - spdif-receiver : The phandle of the spdif-receiver dummy codec + +* Note: At least one of these two properties should be set in the DT binding. + + +Example: + +sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-transmitter = <&spdif_tx_codec>; + spdif-receiver = <&spdif_rx_codec>; +};
sound/soc/fsl/Kconfig +11 -0
@@ -195,6 +195,17 @@ config SND_SOC_IMX_SGTL5000 Say Y if you want to add support for SoC audio on an i.MX board with a sgtl5000 codec. +config SND_SOC_IMX_SPDIF + tristate "SoC Audio support for i.MX boards with S/PDIF" + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SPDIF + select SND_SOC_FSL_UTILS + select SND_SOC_SPDIF + help + SoC Audio support for i.MX boards with S/PDIF + Say Y if you want to add support for SoC audio on an i.MX board with + a S/DPDIF. + config SND_SOC_IMX_MC13783 tristate "SoC Audio support for I.MX boards with mc13783" depends on MFD_MC13783 && ARM
sound/soc/fsl/Makefile +2 -0
@@ -45,6 +45,7 @@ snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o snd-soc-wm1133-ev1-objs := wm1133-ev1.o snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o snd-soc-imx-wm8962-objs := imx-wm8962.o +snd-soc-imx-spdif-objs :=imx-spdif.o snd-soc-imx-mc13783-objs := imx-mc13783.o obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
@@ -53,4 +54,5 @@ obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o obj-$(CONFIG_SND_SOC_IMX_WM8962) += snd-soc-imx-wm8962.o +obj-$(CONFIG_SND_SOC_IMX_SPDIF) += snd-soc-imx-spdif.o obj-$(CONFIG_SND_SOC_IMX_MC13783) += snd-soc-imx-mc13783.o
sound/soc/fsl/imx-spdif.c new file +134 -0
134 lines not on this page · raw message
Signature · 1 line
1.7.1