dt-bindings: misc: aspeed-p2a-ctrl: add support
Subsystems (2)
PATCH v2 1/3 dt-bindings: misc: aspeed-p2a-ctrl: add support
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
Signed-off-by Patrick Venture <[email protected]>
Reviewed-by Rob Herring <[email protected]>
Reviewed-by Andrew Jeffery <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 28703c6ef6228635f7c8b248c1d846511a2b60a3)
---
v2:
- Nothing changed, added to a three-patchset chain.
--- .../bindings/misc/aspeed-p2a-ctrl.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +47 -0
@@ -0,0 +1,47 @@ +====================================================================== +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver +====================================================================== + +The bridge is available on platforms with the VGA enabled on the Aspeed device. +In this case, the host has access to a 64KiB window into all of the BMC's +memory. The BMC can disable this bridge. If the bridge is enabled, the host +has read access to all the regions of memory, however the host only has read +and write access depending on a register controlled by the BMC. + +Required properties: +=================== + + - compatible: must be one of: + - "aspeed,ast2400-p2a-ctrl" + - "aspeed,ast2500-p2a-ctrl" + +Optional properties: +=================== + +- memory-region: A phandle to a reserved_memory region to be used for the PCI + to AHB mapping + +The p2a-control node should be the child of a syscon node with the required +property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + +Example +=================== + +g4 Example +---------- + +syscon: scu@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + memory-region = <&reserved_memory>; + }; +};
Signature · 1 line
2.21.0.593.g511ec345e18-goog