Skip to contentSkip to conversation

Remove duplicated kmap code

PATCH Applied [email protected] 6 participants 63 messages May 7, 2020 – Jun 4, 2020

Subsystems (16)
DRM drivers Arm (32-bit) x86 DRM misc +12 more subsystems
lore
Share & tools
lore
#0 lore raw

v3 cover Remove duplicated kmap code

From: Ira Weiny <[email protected]>

The kmap infrastructure has been copied almost verbatim to every architecture. This series consolidates obvious duplicated code by defining core functions which call into the architectures only when needed.

Some of the k[un]map_atomic() implementations have some similarities but the similarities were not sufficient to warrant further changes.

In addition we remove a duplicate implementation of kmap() in DRM.

Testing was done by 0day to cover all the architectures I can't readily build/test.

---
Changes from V2:
Collect review/acks
Add kmap_prot consolidation patch from Christoph Add 3 suggested patches from Al Viro Fix include for microblaze
Fix static inline for microblaze

Changes from V1:
Fix bisect-ability
Update commit message and fix line lengths Remove unneded kunmap_atomic_high() declarations Remove unneded kmap_atomic_high() declarations collect reviews
rebase to 5.7-rc4

Changes from V0:
Define kmap_flush_tlb() and make kmap() truely arch independent. Redefine the k[un]map_atomic_* code to call into the architectures for
high mem pages
Ensure all architectures define kmap_prot, use it appropriately, and
define kmap_atomic_prot()
Remove drm implementation of kmap_atomic()

Ira Weiny (15):
arch/kmap: Remove BUG_ON()
arch/xtensa: Move kmap build bug out of the way arch/kmap: Remove redundant arch specific kmaps arch/kunmap: Remove duplicate kunmap implementations {x86,powerpc,microblaze}/kmap: Move preempt disable arch/kmap_atomic: Consolidate duplicate code arch/kunmap_atomic: Consolidate duplicate code arch/kmap: Ensure kmap_prot visibility arch/kmap: Don't hard code kmap_prot values arch/kmap: Define kmap_atomic_prot() for all arch's
drm: Remove drm specific kmap_atomic code
kmap: Remove kmap_atomic_to_page() parisc/kmap: Remove duplicate kmap code
sparc: Remove unnecessary includes
kmap: Consolidate kmap_prot definitions

 arch/arc/include/asm/highmem.h        | 18 -------
 arch/arc/mm/highmem.c                 | 28 ++--------
 arch/arm/include/asm/highmem.h        |  9 ----
 arch/arm/mm/highmem.c                 | 35 ++-----------
 arch/csky/include/asm/highmem.h       | 12 +----
 arch/csky/mm/highmem.c                | 56 ++++----------------
 arch/microblaze/include/asm/highmem.h | 27 ----------
 arch/microblaze/mm/highmem.c          | 16 ++----
 arch/microblaze/mm/init.c             |  3 --
 arch/mips/include/asm/highmem.h       | 11 +---
 arch/mips/mm/cache.c                  |  6 +--
 arch/mips/mm/highmem.c                | 49 +++---------------
 arch/nds32/include/asm/highmem.h      |  9 ----
 arch/nds32/mm/highmem.c               | 39 ++------------
 arch/parisc/include/asm/cacheflush.h  | 30 +----------
 arch/powerpc/include/asm/highmem.h    | 28 ----------
 arch/powerpc/mm/highmem.c             | 21 ++------
 arch/powerpc/mm/mem.c                 |  3 --
 arch/sparc/include/asm/highmem.h      | 25 +--------
 arch/sparc/mm/highmem.c               | 20 ++------
 arch/sparc/mm/io-unit.c               |  1 -
 arch/sparc/mm/iommu.c                 |  1 -
 arch/x86/include/asm/fixmap.h         |  1 -
 arch/x86/include/asm/highmem.h        |  9 ----
 arch/x86/mm/highmem_32.c              | 50 ++----------------
 arch/xtensa/include/asm/highmem.h     | 27 ----------
 arch/xtensa/mm/highmem.c              | 22 ++++----
 drivers/gpu/drm/ttm/ttm_bo_util.c     | 56 ++------------------
 drivers/gpu/drm/vmwgfx/vmwgfx_blit.c  | 16 +++---
 include/drm/ttm/ttm_bo_api.h          |  4 --
 include/linux/highmem.h               | 74 ++++++++++++++++++++++++---
 31 files changed, 150 insertions(+), 556 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/15 arch/kmap: Remove BUG_ON()

From: Ira Weiny <[email protected]>

Replace the use of BUG_ON(in_interrupt()) in the kmap() and kunmap() in favor of might_sleep().

Besides the benefits of might_sleep(), this normalizes the implementations such that they can be made generic in subsequent patches.

---
 arch/arc/include/asm/highmem.h        | 2 +-
 arch/arc/mm/highmem.c                 | 2 +-
 arch/arm/mm/highmem.c                 | 2 +-
 arch/csky/mm/highmem.c                | 2 +-
 arch/microblaze/include/asm/highmem.h | 2 +-
 arch/mips/mm/highmem.c                | 2 +-
 arch/nds32/mm/highmem.c               | 2 +-
 arch/powerpc/include/asm/highmem.h    | 2 +-
 arch/sparc/include/asm/highmem.h      | 4 ++--
 arch/x86/mm/highmem_32.c              | 3 +--
 arch/xtensa/include/asm/highmem.h     | 4 ++--
 11 files changed, 13 insertions(+), 14 deletions(-)
arch/arc/include/asm/highmem.h +1 -1
index 1af00accb37f..042e92921c4c 100644
@@ -45,7 +45,7 @@ static inline void flush_cache_kmaps(void)
 
 static inline void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/arc/mm/highmem.c +1 -1
index fc8849e4f72e..39ef7b9a3aa9 100644
@@ -51,7 +51,7 @@ static pte_t * fixmap_page_table;
 
 void *kmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return page_address(page);
 
arch/arm/mm/highmem.c +1 -1
index a76f8ace9ce6..cc6eb79ef20c 100644
@@ -42,7 +42,7 @@ EXPORT_SYMBOL(kmap);
 
 void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/csky/mm/highmem.c +1 -1
index 813129145f3d..690d678649d1 100644
@@ -29,7 +29,7 @@ EXPORT_SYMBOL(kmap);
 
 void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/microblaze/include/asm/highmem.h +1 -1
index 332c78e15198..99ced7278b5c 100644
@@ -66,7 +66,7 @@ static inline void *kmap(struct page *page)
 
 static inline void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/mips/mm/highmem.c +1 -1
index d08e6d7d533b..edd889f6cede 100644
@@ -28,7 +28,7 @@ EXPORT_SYMBOL(kmap);
 
 void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/nds32/mm/highmem.c +1 -1
index 022779af6148..4c7c28e994ea 100644
@@ -24,7 +24,7 @@ EXPORT_SYMBOL(kmap);
 
 void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/powerpc/include/asm/highmem.h +1 -1
index a4b65b186ec6..529512f6d65a 100644
@@ -74,7 +74,7 @@ static inline void *kmap(struct page *page)
 
 static inline void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/sparc/include/asm/highmem.h +2 -2
index 18d776925c45..7dd2d4b3f980 100644
@@ -55,7 +55,7 @@ void kunmap_high(struct page *page);
 
 static inline void *kmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return page_address(page);
 	return kmap_high(page);
@@ -63,7 +63,7 @@ static inline void *kmap(struct page *page)
 
 static inline void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/x86/mm/highmem_32.c +1 -2
index 0a1898b8552e..8af66382672b 100644
@@ -15,8 +15,7 @@ EXPORT_SYMBOL(kmap);
 
 void kunmap(struct page *page)
 {
-	if (in_interrupt())
-		BUG();
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
arch/xtensa/include/asm/highmem.h +2 -2
index 04e9340eac4b..413848cc1e56 100644
@@ -73,7 +73,7 @@ static inline void *kmap(struct page *page)
 	 */
 	BUILD_BUG_ON(PKMAP_BASE <
 		     TLBTEMP_BASE_1 + TLBTEMP_SIZE);
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return page_address(page);
 	return kmap_high(page);
@@ -81,7 +81,7 @@ static inline void *kmap(struct page *page)
 
 static inline void kunmap(struct page *page)
 {
-	BUG_ON(in_interrupt());
+	might_sleep();
 	if (!PageHighMem(page))
 		return;
 	kunmap_high(page);
Signature · 1 line
2.25.1
#2 lore raw

PATCH v3 2/15 arch/xtensa: Move kmap build bug out of the way

In reply to [email protected]

From: Ira Weiny <[email protected]>

Move the kmap() build bug to kmap_init() to facilitate patches to lift kmap() to the core.

---
Changes from V1:
combine code onto 1 line.

---
 arch/xtensa/include/asm/highmem.h | 5 -----
 arch/xtensa/mm/highmem.c          | 4 ++++
 2 files changed, 4 insertions(+), 5 deletions(-)
arch/xtensa/include/asm/highmem.h +0 -5
index 413848cc1e56..a9587c85be85 100644
@@ -68,11 +68,6 @@ void kunmap_high(struct page *page);
 
 static inline void *kmap(struct page *page)
 {
-	/* Check if this memory layout is broken because PKMAP overlaps
-	 * page table.
-	 */
-	BUILD_BUG_ON(PKMAP_BASE <
-		     TLBTEMP_BASE_1 + TLBTEMP_SIZE);
 	might_sleep();
 	if (!PageHighMem(page))
 		return page_address(page);
arch/xtensa/mm/highmem.c +4 -0
index 184ceadccc1a..da734a2ed641 100644
@@ -88,6 +88,10 @@ void __init kmap_init(void)
 {
 	unsigned long kmap_vstart;
 
+	/* Check if this memory layout is broken because PKMAP overlaps
+	 * page table.
+	 */
+	BUILD_BUG_ON(PKMAP_BASE < TLBTEMP_BASE_1 + TLBTEMP_SIZE);
 	/* cache the first kmap pte */
 	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
 	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
Signature · 1 line
2.25.1
#3 lore raw

PATCH v3 3/15 arch/kmap: Remove redundant arch specific kmaps

In reply to [email protected]

From: Ira Weiny <[email protected]>

The kmap code for all the architectures is almost 100% identical.

Lift the common code to the core. Use ARCH_HAS_KMAP_FLUSH_TLB to indicate if an arch defines kmap_flush_tlb() and call if if needed.

This also has the benefit of changing kmap() on a number of architectures to be an inline call rather than an actual function.

---
 arch/arc/include/asm/highmem.h        |  2 --
 arch/arc/mm/highmem.c                 | 10 ----------
 arch/arm/include/asm/highmem.h        |  2 --
 arch/arm/mm/highmem.c                 |  9 ---------
 arch/csky/include/asm/highmem.h       |  4 ++--
 arch/csky/mm/highmem.c                | 14 ++++----------
 arch/microblaze/include/asm/highmem.h |  9 ---------
 arch/mips/include/asm/highmem.h       |  4 ++--
 arch/mips/mm/highmem.c                | 14 +++-----------
 arch/nds32/include/asm/highmem.h      |  2 --
 arch/nds32/mm/highmem.c               | 12 ------------
 arch/powerpc/include/asm/highmem.h    |  9 ---------
 arch/sparc/include/asm/highmem.h      |  9 ---------
 arch/x86/include/asm/highmem.h        |  2 --
 arch/x86/mm/highmem_32.c              |  9 ---------
 arch/xtensa/include/asm/highmem.h     |  9 ---------
 include/linux/highmem.h               | 18 ++++++++++++++++++
 17 files changed, 29 insertions(+), 109 deletions(-)
arch/arc/include/asm/highmem.h +0 -2
index 042e92921c4c..96eb67c86961 100644
@@ -30,8 +30,6 @@
 
 #include <asm/cacheflush.h>
 
-extern void *kmap(struct page *page);
-extern void *kmap_high(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void kunmap_high(struct page *page);
arch/arc/mm/highmem.c +0 -10
index 39ef7b9a3aa9..4db13a6b9f3b 100644
@@ -49,16 +49,6 @@
 extern pte_t * pkmap_page_table;
 static pte_t * fixmap_page_table;
 
-void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	return kmap_high(page);
-}
-EXPORT_SYMBOL(kmap);
-
 void *kmap_atomic(struct page *page)
 {
 	int idx, cpu_idx;
arch/arm/include/asm/highmem.h +0 -2
index eb4e4207cd3c..c917522541de 100644
@@ -20,7 +20,6 @@
 
 extern pte_t *pkmap_page_table;
 
-extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 
 /*
@@ -63,7 +62,6 @@ static inline void *kmap_high_get(struct page *page)
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void *kmap(struct page *page);
 extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
arch/arm/mm/highmem.c +0 -9
index cc6eb79ef20c..e8ba37c36590 100644
@@ -31,15 +31,6 @@ static inline pte_t get_fixmap_pte(unsigned long vaddr)
 	return *ptep;
 }
 
-void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-EXPORT_SYMBOL(kmap);
-
 void kunmap(struct page *page)
 {
 	might_sleep();
arch/csky/include/asm/highmem.h +2 -2
index a345a2f2c22e..9d0516e38110 100644
@@ -30,10 +30,10 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 
-extern void *kmap(struct page *page);
+#define ARCH_HAS_KMAP_FLUSH_TLB
+extern void kmap_flush_tlb(unsigned long addr);
 extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
arch/csky/mm/highmem.c +4 -10
index 690d678649d1..4a3c273bc8b9 100644
@@ -13,18 +13,12 @@ static pte_t *kmap_pte;
 
 unsigned long highstart_pfn, highend_pfn;
 
-void *kmap(struct page *page)
+void kmap_flush_tlb(unsigned long addr)
 {
-	void *addr;
-
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	addr = kmap_high(page);
-	flush_tlb_one((unsigned long)addr);
-
-	return addr;
+	flush_tlb_one(addr);
 }
+EXPORT_SYMBOL(kmap_flush_tlb);
+
 EXPORT_SYMBOL(kmap);
 
 void kunmap(struct page *page)
arch/microblaze/include/asm/highmem.h +0 -9
index 99ced7278b5c..8c5bfd228bd8 100644
@@ -51,19 +51,10 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 extern void *kmap_atomic_prot(struct page *page, pgprot_t prot);
 extern void __kunmap_atomic(void *kvaddr);
 
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-
 static inline void kunmap(struct page *page)
 {
 	might_sleep();
arch/mips/include/asm/highmem.h +2 -2
index 9d84aafc33d0..1f741e3ecabf 100644
@@ -46,10 +46,10 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)	((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void * kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 
-extern void *kmap(struct page *page);
+#define ARCH_HAS_KMAP_FLUSH_TLB
+extern void kmap_flush_tlb(unsigned long addr);
 extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
arch/mips/mm/highmem.c +3 -11
index edd889f6cede..c72058bfead6 100644
@@ -12,19 +12,11 @@ static pte_t *kmap_pte;
 
 unsigned long highstart_pfn, highend_pfn;
 
-void *kmap(struct page *page)
+void kmap_flush_tlb(unsigned long addr)
 {
-	void *addr;
-
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	addr = kmap_high(page);
-	flush_tlb_one((unsigned long)addr);
-
-	return addr;
+	flush_tlb_one(addr);
 }
-EXPORT_SYMBOL(kmap);
+EXPORT_SYMBOL(kmap_flush_tlb);
 
 void kunmap(struct page *page)
 {
arch/nds32/include/asm/highmem.h +0 -2
index b3a82c97ded3..b13654a79069 100644
@@ -44,7 +44,6 @@ extern unsigned long highstart_pfn, highend_pfn;
 
 extern pte_t *pkmap_page_table;
 
-extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 
 extern void kmap_init(void);
@@ -54,7 +53,6 @@ extern void kmap_init(void);
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void *kmap(struct page *page);
 extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
arch/nds32/mm/highmem.c +0 -12
index 4c7c28e994ea..d0cde53b84ae 100644
@@ -10,18 +10,6 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
-void *kmap(struct page *page)
-{
-	unsigned long vaddr;
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	vaddr = (unsigned long)kmap_high(page);
-	return (void *)vaddr;
-}
-
-EXPORT_SYMBOL(kmap);
-
 void kunmap(struct page *page)
 {
 	might_sleep();
arch/powerpc/include/asm/highmem.h +0 -9
index 529512f6d65a..f14e4feef6d5 100644
@@ -59,19 +59,10 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 extern void *kmap_atomic_prot(struct page *page, pgprot_t prot);
 extern void __kunmap_atomic(void *kvaddr);
 
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-
 static inline void kunmap(struct page *page)
 {
 	might_sleep();
arch/sparc/include/asm/highmem.h +0 -9
index 7dd2d4b3f980..2ff1192047f7 100644
@@ -50,17 +50,8 @@ void kmap_init(void) __init;
 
 #define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
 
-void *kmap_high(struct page *page);
 void kunmap_high(struct page *page);
 
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-
 static inline void kunmap(struct page *page)
 {
 	might_sleep();
arch/x86/include/asm/highmem.h +0 -2
index a8059930056d..c916a28a9738 100644
@@ -58,10 +58,8 @@ extern unsigned long highstart_pfn, highend_pfn;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 
-void *kmap(struct page *page);
 void kunmap(struct page *page);
 
 void *kmap_atomic_prot(struct page *page, pgprot_t prot);
arch/x86/mm/highmem_32.c +0 -9
index 8af66382672b..12591a81b85c 100644
@@ -4,15 +4,6 @@
 #include <linux/swap.h> /* for totalram_pages */
 #include <linux/memblock.h>
 
-void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-EXPORT_SYMBOL(kmap);
-
 void kunmap(struct page *page)
 {
 	might_sleep();
arch/xtensa/include/asm/highmem.h +0 -9
index a9587c85be85..2546b88ddecf 100644
@@ -63,17 +63,8 @@ static inline wait_queue_head_t *get_pkmap_wait_queue_head(unsigned int color)
 
 extern pte_t *pkmap_page_table;
 
-void *kmap_high(struct page *page);
 void kunmap_high(struct page *page);
 
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-
 static inline void kunmap(struct page *page)
 {
 	might_sleep();
include/linux/highmem.h +18 -0
index ea5cdbd8c2c3..fc3adc51254a 100644
@@ -34,6 +34,24 @@ static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
 #ifdef CONFIG_HIGHMEM
 #include <asm/highmem.h>
 
+#ifndef ARCH_HAS_KMAP_FLUSH_TLB
+static inline void kmap_flush_tlb(unsigned long addr) { }
+#endif
+
+void *kmap_high(struct page *page);
+static inline void *kmap(struct page *page)
+{
+	void *addr;
+
+	might_sleep();
+	if (!PageHighMem(page))
+		addr = page_address(page);
+	else
+		addr = kmap_high(page);
+	kmap_flush_tlb((unsigned long)addr);
+	return addr;
+}
+
 /* declarations for linux/mm/highmem.c */
 unsigned int nr_free_highpages(void);
 extern atomic_long_t _totalhigh_pages;
Signature · 1 line
2.25.1
#4 lore raw

PATCH v3 4/15 arch/kunmap: Remove duplicate kunmap implementations

In reply to [email protected]

From: Ira Weiny <[email protected]>

All architectures do exactly the same thing for kunmap(); remove all the duplicate definitions and lift the call to the core.

This also has the benefit of changing kmap_unmap() on a number of architectures to be an inline call rather than an actual function.

---
 arch/arc/include/asm/highmem.h        | 10 ----------
 arch/arm/include/asm/highmem.h        |  3 ---
 arch/arm/mm/highmem.c                 |  9 ---------
 arch/csky/include/asm/highmem.h       |  3 ---
 arch/csky/mm/highmem.c                |  9 ---------
 arch/microblaze/include/asm/highmem.h |  9 ---------
 arch/mips/include/asm/highmem.h       |  3 ---
 arch/mips/mm/highmem.c                |  9 ---------
 arch/nds32/include/asm/highmem.h      |  3 ---
 arch/nds32/mm/highmem.c               | 10 ----------
 arch/powerpc/include/asm/highmem.h    |  9 ---------
 arch/sparc/include/asm/highmem.h      | 10 ----------
 arch/x86/include/asm/highmem.h        |  4 ----
 arch/x86/mm/highmem_32.c              |  9 ---------
 arch/xtensa/include/asm/highmem.h     | 10 ----------
 include/linux/highmem.h               |  9 +++++++++
 16 files changed, 9 insertions(+), 110 deletions(-)
arch/arc/include/asm/highmem.h +0 -10
index 96eb67c86961..8387a5596a91 100644
@@ -32,7 +32,6 @@
 
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
-extern void kunmap_high(struct page *page);
 
 extern void kmap_init(void);
 
@@ -41,15 +40,6 @@ static inline void flush_cache_kmaps(void)
 	flush_cache_all();
 }
 
-static inline void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
-
 #endif
 
 #endif
arch/arm/include/asm/highmem.h +0 -3
index c917522541de..736f65283e7b 100644
@@ -20,8 +20,6 @@
 
 extern pte_t *pkmap_page_table;
 
-extern void kunmap_high(struct page *page);
-
 /*
  * The reason for kmap_high_get() is to ensure that the currently kmap'd
  * page usage count does not decrease to zero while we're using its
@@ -62,7 +60,6 @@ static inline void *kmap_high_get(struct page *page)
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
arch/arm/mm/highmem.c +0 -9
index e8ba37c36590..c700b32350ee 100644
@@ -31,15 +31,6 @@ static inline pte_t get_fixmap_pte(unsigned long vaddr)
 	return *ptep;
 }
 
-void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-EXPORT_SYMBOL(kunmap);
-
 void *kmap_atomic(struct page *page)
 {
 	unsigned int idx;
arch/csky/include/asm/highmem.h +0 -3
index 9d0516e38110..be11c5b67122 100644
@@ -30,11 +30,8 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void kunmap_high(struct page *page);
-
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
-extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
arch/csky/mm/highmem.c +0 -9
index 4a3c273bc8b9..e9952211264b 100644
@@ -21,15 +21,6 @@ EXPORT_SYMBOL(kmap_flush_tlb);
 
 EXPORT_SYMBOL(kmap);
 
-void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-EXPORT_SYMBOL(kunmap);
-
 void *kmap_atomic(struct page *page)
 {
 	unsigned long vaddr;
arch/microblaze/include/asm/highmem.h +0 -9
index 8c5bfd228bd8..0c94046f2d58 100644
@@ -51,18 +51,9 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void kunmap_high(struct page *page);
 extern void *kmap_atomic_prot(struct page *page, pgprot_t prot);
 extern void __kunmap_atomic(void *kvaddr);
 
-static inline void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
 static inline void *kmap_atomic(struct page *page)
 {
 	return kmap_atomic_prot(page, kmap_prot);
arch/mips/include/asm/highmem.h +0 -3
index 1f741e3ecabf..24e7e7e5cc7b 100644
@@ -46,11 +46,8 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)	((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)	(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void kunmap_high(struct page *page);
-
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
-extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
arch/mips/mm/highmem.c +0 -9
index c72058bfead6..eb8ec8493f2f 100644
@@ -18,15 +18,6 @@ void kmap_flush_tlb(unsigned long addr)
 }
 EXPORT_SYMBOL(kmap_flush_tlb);
 
-void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-EXPORT_SYMBOL(kunmap);
-
 /*
  * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
  * no global lock is needed and because the kmap code must perform a global TLB
arch/nds32/include/asm/highmem.h +0 -3
index b13654a79069..c93c7368bb3f 100644
@@ -44,8 +44,6 @@ extern unsigned long highstart_pfn, highend_pfn;
 
 extern pte_t *pkmap_page_table;
 
-extern void kunmap_high(struct page *page);
-
 extern void kmap_init(void);
 
 /*
@@ -53,7 +51,6 @@ extern void kmap_init(void);
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
arch/nds32/mm/highmem.c +0 -10
index d0cde53b84ae..f9348bec0ecb 100644
@@ -10,16 +10,6 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
-void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
-EXPORT_SYMBOL(kunmap);
-
 void *kmap_atomic(struct page *page)
 {
 	unsigned int idx;
arch/powerpc/include/asm/highmem.h +0 -9
index f14e4feef6d5..ba3371977d49 100644
@@ -59,18 +59,9 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void kunmap_high(struct page *page);
 extern void *kmap_atomic_prot(struct page *page, pgprot_t prot);
 extern void __kunmap_atomic(void *kvaddr);
 
-static inline void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
 static inline void *kmap_atomic(struct page *page)
 {
 	return kmap_atomic_prot(page, kmap_prot);
arch/sparc/include/asm/highmem.h +0 -10
index 2ff1192047f7..4bdb79fed02c 100644
@@ -50,16 +50,6 @@ void kmap_init(void) __init;
 
 #define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
 
-void kunmap_high(struct page *page);
-
-static inline void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
 void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
 
arch/x86/include/asm/highmem.h +0 -4
index c916a28a9738..90b96594d6c5 100644
@@ -58,10 +58,6 @@ extern unsigned long highstart_pfn, highend_pfn;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void kunmap_high(struct page *page);
-
-void kunmap(struct page *page);
-
 void *kmap_atomic_prot(struct page *page, pgprot_t prot);
 void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
arch/x86/mm/highmem_32.c +0 -9
index 12591a81b85c..c4ebfd0ae401 100644
@@ -4,15 +4,6 @@
 #include <linux/swap.h> /* for totalram_pages */
 #include <linux/memblock.h>
 
-void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-EXPORT_SYMBOL(kunmap);
-
 /*
  * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
  * no global lock is needed and because the kmap code must perform a global TLB
arch/xtensa/include/asm/highmem.h +0 -10
index 2546b88ddecf..5a481f7def0b 100644
@@ -63,16 +63,6 @@ static inline wait_queue_head_t *get_pkmap_wait_queue_head(unsigned int color)
 
 extern pte_t *pkmap_page_table;
 
-void kunmap_high(struct page *page);
-
-static inline void kunmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
 static inline void flush_cache_kmaps(void)
 {
 	flush_cache_all();
include/linux/highmem.h +9 -0
index fc3adc51254a..ae6e8cb81043 100644
@@ -52,6 +52,15 @@ static inline void *kmap(struct page *page)
 	return addr;
 }
 
+void kunmap_high(struct page *page);
+static inline void kunmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
 /* declarations for linux/mm/highmem.c */
 unsigned int nr_free_highpages(void);
 extern atomic_long_t _totalhigh_pages;
Signature · 1 line
2.25.1
#5 lore raw

PATCH v3 5/15 {x86,powerpc,microblaze}/kmap: Move preempt disable

In reply to [email protected]

From: Ira Weiny <[email protected]>

During this kmap() conversion series we must maintain bisect-ability. To do this, kmap_atomic_prot() in x86, powerpc, and microblaze need to remain functional.

Create a temporary inline version of kmap_atomic_prot within these architectures so we can rework their kmap_atomic() calls and then lift kmap_atomic_prot() to the core.

---
Changes from V2:
Fix microblaze not being static inline

Changes from V1:
New patch

---
 arch/microblaze/include/asm/highmem.h | 11 ++++++++++-
 arch/microblaze/mm/highmem.c          | 10 ++--------
 arch/powerpc/include/asm/highmem.h    | 11 ++++++++++-
 arch/powerpc/mm/highmem.c             |  9 ++-------
 arch/x86/include/asm/highmem.h        | 11 ++++++++++-
 arch/x86/mm/highmem_32.c              | 10 ++--------
 6 files changed, 36 insertions(+), 26 deletions(-)
arch/microblaze/include/asm/highmem.h +10 -1
index 0c94046f2d58..c38d920a1171 100644
@@ -51,7 +51,16 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_atomic_prot(struct page *page, pgprot_t prot);
+extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
+static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
+{
+	preempt_disable();
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	return kmap_atomic_high_prot(page, prot);
+}
 extern void __kunmap_atomic(void *kvaddr);
 
 static inline void *kmap_atomic(struct page *page)
arch/microblaze/mm/highmem.c +2 -8
index d7569f77fa15..0e3efaa8a004 100644
@@ -32,18 +32,12 @@
  */
 #include <asm/tlbflush.h>
 
-void *kmap_atomic_prot(struct page *page, pgprot_t prot)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 
 	unsigned long vaddr;
 	int idx, type;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -55,7 +49,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 
 	return (void *) vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_prot);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/powerpc/include/asm/highmem.h +10 -1
index ba3371977d49..d049806a8354 100644
@@ -59,7 +59,16 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_atomic_prot(struct page *page, pgprot_t prot);
+extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
+static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
+{
+	preempt_disable();
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	return kmap_atomic_high_prot(page, prot);
+}
 extern void __kunmap_atomic(void *kvaddr);
 
 static inline void *kmap_atomic(struct page *page)
arch/powerpc/mm/highmem.c +2 -7
index 320c1672b2ae..f075cef6d663 100644
@@ -30,16 +30,11 @@
  * be used in IRQ contexts, so in some (very limited) cases we need
  * it.
  */
-void *kmap_atomic_prot(struct page *page, pgprot_t prot)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
 	int idx, type;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -49,7 +44,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 
 	return (void*) vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_prot);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/x86/include/asm/highmem.h +10 -1
index 90b96594d6c5..61f47fef40e5 100644
@@ -58,7 +58,16 @@ extern unsigned long highstart_pfn, highend_pfn;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-void *kmap_atomic_prot(struct page *page, pgprot_t prot);
+extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
+static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
+{
+	preempt_disable();
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	return kmap_atomic_high_prot(page, prot);
+}
 void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
 void *kmap_atomic_pfn(unsigned long pfn);
arch/x86/mm/highmem_32.c +2 -8
index c4ebfd0ae401..48b56b1af902 100644
@@ -12,17 +12,11 @@
  * However when holding an atomic kmap it is not legal to sleep, so atomic
  * kmaps are appropriate for short, tight code paths only.
  */
-void *kmap_atomic_prot(struct page *page, pgprot_t prot)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
 	int idx, type;
 
-	preempt_disable();
-	pagefault_disable();
-
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -32,7 +26,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_prot);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void *kmap_atomic(struct page *page)
 {
Signature · 1 line
2.25.1
#6 lore raw

PATCH v3 6/15 arch/kmap_atomic: Consolidate duplicate code

In reply to [email protected]

From: Ira Weiny <[email protected]>

Every arch has the same code to ensure atomic operations and a check for !HIGHMEM page.

Remove the duplicate code by defining a core kmap_atomic() which only calls the arch specific kmap_atomic_high() when the page is high memory.

---
Changes from V1:
Adjust to preserve bisect-ability Remove unneeded kmap_atomic_high declarations

---
 arch/arc/include/asm/highmem.h        |  1 -
 arch/arc/mm/highmem.c                 |  9 ++-------
 arch/arm/include/asm/highmem.h        |  1 -
 arch/arm/mm/highmem.c                 |  9 ++-------
 arch/csky/include/asm/highmem.h       |  1 -
 arch/csky/mm/highmem.c                |  9 ++-------
 arch/microblaze/include/asm/highmem.h |  4 ++--
 arch/mips/include/asm/highmem.h       |  1 -
 arch/mips/mm/cache.c                  |  2 +-
 arch/mips/mm/highmem.c                | 18 ++----------------
 arch/nds32/include/asm/highmem.h      |  1 -
 arch/nds32/mm/highmem.c               |  9 ++-------
 arch/powerpc/include/asm/highmem.h    |  4 ++--
 arch/powerpc/mm/highmem.c             |  6 ------
 arch/sparc/include/asm/highmem.h      |  1 -
 arch/sparc/mm/highmem.c               |  9 ++-------
 arch/x86/include/asm/highmem.h        |  5 ++++-
 arch/x86/mm/highmem_32.c              | 14 --------------
 arch/xtensa/include/asm/highmem.h     |  1 -
 arch/xtensa/mm/highmem.c              |  9 ++-------
 include/linux/highmem.h               | 23 +++++++++++++++++++++++
 21 files changed, 46 insertions(+), 91 deletions(-)
arch/arc/include/asm/highmem.h +0 -1
index 8387a5596a91..db425cd38545 100644
@@ -30,7 +30,6 @@
 
 #include <asm/cacheflush.h>
 
-extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 
 extern void kmap_init(void);
arch/arc/mm/highmem.c +2 -7
index 4db13a6b9f3b..0964b011c29f 100644
@@ -49,16 +49,11 @@
 extern pte_t * pkmap_page_table;
 static pte_t * fixmap_page_table;
 
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	int idx, cpu_idx;
 	unsigned long vaddr;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	cpu_idx = kmap_atomic_idx_push();
 	idx = cpu_idx + KM_TYPE_NR * smp_processor_id();
 	vaddr = FIXMAP_ADDR(idx);
@@ -68,7 +63,7 @@ void *kmap_atomic(struct page *page)
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kv)
 {
arch/arm/include/asm/highmem.h +0 -1
index 736f65283e7b..8c80bfe18a34 100644
@@ -60,7 +60,6 @@ static inline void *kmap_high_get(struct page *page)
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 #endif
arch/arm/mm/highmem.c +2 -7
index c700b32350ee..075fdc235091 100644
@@ -31,18 +31,13 @@ static inline pte_t get_fixmap_pte(unsigned long vaddr)
 	return *ptep;
 }
 
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	unsigned int idx;
 	unsigned long vaddr;
 	void *kmap;
 	int type;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 #ifdef CONFIG_DEBUG_HIGHMEM
 	/*
 	 * There is no cache coherency issue when non VIVT, so force the
@@ -76,7 +71,7 @@ void *kmap_atomic(struct page *page)
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/csky/include/asm/highmem.h +0 -1
index be11c5b67122..8ceee12f9bc1 100644
@@ -32,7 +32,6 @@ extern pte_t *pkmap_page_table;
 
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
-extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 extern struct page *kmap_atomic_to_page(void *ptr);
arch/csky/mm/highmem.c +2 -7
index e9952211264b..63d74b47eee6 100644
@@ -21,16 +21,11 @@ EXPORT_SYMBOL(kmap_flush_tlb);
 
 EXPORT_SYMBOL(kmap);
 
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	unsigned long vaddr;
 	int idx, type;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -42,7 +37,7 @@ void *kmap_atomic(struct page *page)
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/microblaze/include/asm/highmem.h +2 -2
index c38d920a1171..f7c5467df5ad 100644
@@ -63,9 +63,9 @@ static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 }
 extern void __kunmap_atomic(void *kvaddr);
 
-static inline void *kmap_atomic(struct page *page)
+static inline void *kmap_atomic_high(struct page *page)
 {
-	return kmap_atomic_prot(page, kmap_prot);
+	return kmap_atomic_high_prot(page, kmap_prot);
 }
 
 #define flush_cache_kmaps()	{ flush_icache(); flush_dcache(); }
arch/mips/include/asm/highmem.h +0 -1
index 24e7e7e5cc7b..8bdbbfc322ad 100644
@@ -48,7 +48,6 @@ extern pte_t *pkmap_page_table;
 
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
-extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 
arch/mips/mm/cache.c +1 -1
index 33b409391ddb..f015bb51fab0 100644
@@ -14,9 +14,9 @@
 #include <linux/sched.h>
 #include <linux/syscalls.h>
 #include <linux/mm.h>
+#include <linux/highmem.h>
 
 #include <asm/cacheflush.h>
-#include <asm/highmem.h>
 #include <asm/processor.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
arch/mips/mm/highmem.c +2 -16
index eb8ec8493f2f..2bda56372995 100644
@@ -18,25 +18,11 @@ void kmap_flush_tlb(unsigned long addr)
 }
 EXPORT_SYMBOL(kmap_flush_tlb);
 
-/*
- * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
- * no global lock is needed and because the kmap code must perform a global TLB
- * invalidation when the kmap pool wraps.
- *
- * However when holding an atomic kmap is is not legal to sleep, so atomic
- * kmaps are appropriate for short, tight code paths only.
- */
-
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	unsigned long vaddr;
 	int idx, type;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -48,7 +34,7 @@ void *kmap_atomic(struct page *page)
 
 	return (void*) vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/nds32/include/asm/highmem.h +0 -1
index c93c7368bb3f..a3970e566ede 100644
@@ -51,7 +51,6 @@ extern void kmap_init(void);
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 extern struct page *kmap_atomic_to_page(void *ptr);
arch/nds32/mm/highmem.c +2 -7
index f9348bec0ecb..f5f3a21460c4 100644
@@ -10,18 +10,13 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	unsigned int idx;
 	unsigned long vaddr, pte;
 	int type;
 	pte_t *ptep;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	type = kmap_atomic_idx_push();
 
 	idx = type + KM_TYPE_NR * smp_processor_id();
@@ -37,7 +32,7 @@ void *kmap_atomic(struct page *page)
 	return (void *)vaddr;
 }
 
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/powerpc/include/asm/highmem.h +2 -2
index d049806a8354..74fa2c726fde 100644
@@ -71,9 +71,9 @@ static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 }
 extern void __kunmap_atomic(void *kvaddr);
 
-static inline void *kmap_atomic(struct page *page)
+static inline void *kmap_atomic_high(struct page *page)
 {
-	return kmap_atomic_prot(page, kmap_prot);
+	return kmap_atomic_high_prot(page, kmap_prot);
 }
 
 
arch/powerpc/mm/highmem.c +0 -6
index f075cef6d663..67aaa5217f7f 100644
@@ -24,12 +24,6 @@
 #include <linux/highmem.h>
 #include <linux/module.h>
 
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
 void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
arch/sparc/include/asm/highmem.h +0 -1
index 4bdb79fed02c..458210c5bc38 100644
@@ -50,7 +50,6 @@ void kmap_init(void) __init;
 
 #define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
 
-void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
 
 #define flush_cache_kmaps()	flush_cache_all()
arch/sparc/mm/highmem.c +2 -7
index d4a80adea7e5..b53070ab6a31 100644
@@ -53,16 +53,11 @@ void __init kmap_init(void)
         kmap_prot = __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
 }
 
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	unsigned long vaddr;
 	long idx, type;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -87,7 +82,7 @@ void *kmap_atomic(struct page *page)
 
 	return (void*) vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kvaddr)
 {
arch/x86/include/asm/highmem.h +4 -1
index 61f47fef40e5..9393d55a2adb 100644
@@ -68,7 +68,10 @@ static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 
 	return kmap_atomic_high_prot(page, prot);
 }
-void *kmap_atomic(struct page *page);
+static inline void *kmap_atomic_high(struct page *page)
+{
+	return kmap_atomic_high_prot(page, kmap_prot);
+}
 void __kunmap_atomic(void *kvaddr);
 void *kmap_atomic_pfn(unsigned long pfn);
 void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
arch/x86/mm/highmem_32.c +0 -14
index 48b56b1af902..c3e272a759e0 100644
@@ -4,14 +4,6 @@
 #include <linux/swap.h> /* for totalram_pages */
 #include <linux/memblock.h>
 
-/*
- * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
- * no global lock is needed and because the kmap code must perform a global TLB
- * invalidation when the kmap pool wraps.
- *
- * However when holding an atomic kmap it is not legal to sleep, so atomic
- * kmaps are appropriate for short, tight code paths only.
- */
 void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
@@ -28,12 +20,6 @@ void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 }
 EXPORT_SYMBOL(kmap_atomic_high_prot);
 
-void *kmap_atomic(struct page *page)
-{
-	return kmap_atomic_prot(page, kmap_prot);
-}
-EXPORT_SYMBOL(kmap_atomic);
-
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
  * have a struct page associated with it.
arch/xtensa/include/asm/highmem.h +0 -1
index 5a481f7def0b..1e6aa15c4bdf 100644
@@ -68,7 +68,6 @@ static inline void flush_cache_kmaps(void)
 	flush_cache_all();
 }
 
-void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
 
 void kmap_init(void);
arch/xtensa/mm/highmem.c +2 -7
index da734a2ed641..90b85a897cb0 100644
@@ -37,16 +37,11 @@ static inline enum fixed_addresses kmap_idx(int type, unsigned long color)
 		color;
 }
 
-void *kmap_atomic(struct page *page)
+void *kmap_atomic_high(struct page *page)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
 
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
 	idx = kmap_idx(kmap_atomic_idx_push(),
 		       DCACHE_ALIAS(page_to_phys(page)));
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
@@ -57,7 +52,7 @@ void *kmap_atomic(struct page *page)
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_high);
 
 void __kunmap_atomic(void *kvaddr)
 {
include/linux/highmem.h +23 -0
index ae6e8cb81043..86b93dee758a 100644
@@ -32,6 +32,7 @@ static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
 #include <asm/kmap_types.h>
 
 #ifdef CONFIG_HIGHMEM
+extern void *kmap_atomic_high(struct page *page);
 #include <asm/highmem.h>
 
 #ifndef ARCH_HAS_KMAP_FLUSH_TLB
@@ -61,6 +62,28 @@ static inline void kunmap(struct page *page)
 	kunmap_high(page);
 }
 
+/*
+ * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
+ * no global lock is needed and because the kmap code must perform a global TLB
+ * invalidation when the kmap pool wraps.
+ *
+ * However when holding an atomic kmap is is not legal to sleep, so atomic
+ * kmaps are appropriate for short, tight code paths only.
+ *
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic(struct page *page)
+{
+	preempt_disable();
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_atomic_high(page);
+}
+
 /* declarations for linux/mm/highmem.c */
 unsigned int nr_free_highpages(void);
 extern atomic_long_t _totalhigh_pages;
Signature · 1 line
2.25.1
#7 lore raw

PATCH v3 7/15 arch/kunmap_atomic: Consolidate duplicate code

In reply to [email protected]

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

---
Changes from V1:
Adjust to preserve bisect-ability Remove uneeded kunmap_atomic_high() declarations

---
 arch/arc/include/asm/highmem.h        |  2 --
 arch/arc/mm/highmem.c                 |  7 ++-----
 arch/arm/include/asm/highmem.h        |  1 -
 arch/arm/mm/highmem.c                 |  6 ++----
 arch/csky/include/asm/highmem.h       |  1 -
 arch/csky/mm/highmem.c                |  9 +++------
 arch/microblaze/include/asm/highmem.h |  1 -
 arch/microblaze/mm/highmem.c          |  6 ++----
 arch/mips/include/asm/highmem.h       |  1 -
 arch/mips/mm/cache.c                  |  4 ++--
 arch/mips/mm/highmem.c                |  6 ++----
 arch/nds32/include/asm/highmem.h      |  1 -
 arch/nds32/mm/highmem.c               |  6 ++----
 arch/parisc/include/asm/cacheflush.h  |  4 +---
 arch/powerpc/include/asm/highmem.h    |  1 -
 arch/powerpc/mm/highmem.c             |  6 ++----
 arch/sparc/include/asm/highmem.h      |  2 --
 arch/sparc/mm/highmem.c               |  6 ++----
 arch/x86/include/asm/highmem.h        |  1 -
 arch/x86/mm/highmem_32.c              |  7 ++-----
 arch/xtensa/include/asm/highmem.h     |  2 --
 arch/xtensa/mm/highmem.c              |  7 ++-----
 include/linux/highmem.h               | 11 +++++++----
 23 files changed, 31 insertions(+), 67 deletions(-)
arch/arc/include/asm/highmem.h +0 -2
index db425cd38545..70900a73bfc8 100644
@@ -30,8 +30,6 @@
 
 #include <asm/cacheflush.h>
 
-extern void __kunmap_atomic(void *kvaddr);
-
 extern void kmap_init(void);
 
 static inline void flush_cache_kmaps(void)
arch/arc/mm/highmem.c +2 -5
index 0964b011c29f..5d3eab4ac0b0 100644
@@ -65,7 +65,7 @@ void *kmap_atomic_high(struct page *page)
 }
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kv)
+void kunmap_atomic_high(void *kv)
 {
 	unsigned long kvaddr = (unsigned long)kv;
 
@@ -87,11 +87,8 @@ void __kunmap_atomic(void *kv)
 
 		kmap_atomic_idx_pop();
 	}
-
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
 
 static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr)
 {
arch/arm/include/asm/highmem.h +0 -1
index 8c80bfe18a34..b0d4bd8dc3c1 100644
@@ -60,7 +60,6 @@ static inline void *kmap_high_get(struct page *page)
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 #endif
 
arch/arm/mm/highmem.c +2 -4
index 075fdc235091..ac8394655a6e 100644
@@ -73,7 +73,7 @@ void *kmap_atomic_high(struct page *page)
 }
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int idx, type;
@@ -95,10 +95,8 @@ void __kunmap_atomic(void *kvaddr)
 		/* this address was obtained through kmap_high_get() */
 		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
 	}
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
 
 void *kmap_atomic_pfn(unsigned long pfn)
 {
arch/csky/include/asm/highmem.h +0 -1
index 8ceee12f9bc1..263fbddcd0a3 100644
@@ -32,7 +32,6 @@ extern pte_t *pkmap_page_table;
 
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
-extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 extern struct page *kmap_atomic_to_page(void *ptr);
 
arch/csky/mm/highmem.c +3 -6
index 63d74b47eee6..0aafbbbe651c 100644
@@ -39,13 +39,13 @@ void *kmap_atomic_high(struct page *page)
 }
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int idx;
 
 	if (vaddr < FIXADDR_START)
-		goto out;
+		return;
 
 #ifdef CONFIG_DEBUG_HIGHMEM
 	idx = KM_TYPE_NR*smp_processor_id() + kmap_atomic_idx();
@@ -58,11 +58,8 @@ void __kunmap_atomic(void *kvaddr)
 	(void) idx; /* to kill a warning */
 #endif
 	kmap_atomic_idx_pop();
-out:
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
arch/microblaze/include/asm/highmem.h +0 -1
index f7c5467df5ad..c3cbda90391d 100644
@@ -61,7 +61,6 @@ static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 
 	return kmap_atomic_high_prot(page, prot);
 }
-extern void __kunmap_atomic(void *kvaddr);
 
 static inline void *kmap_atomic_high(struct page *page)
 {
arch/microblaze/mm/highmem.c +2 -4
index 0e3efaa8a004..ee8a422b2b76 100644
@@ -51,7 +51,7 @@ void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 }
 EXPORT_SYMBOL(kmap_atomic_high_prot);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int type;
@@ -77,7 +77,5 @@ void __kunmap_atomic(void *kvaddr)
 	local_flush_tlb_page(NULL, vaddr);
 
 	kmap_atomic_idx_pop();
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
arch/mips/include/asm/highmem.h +0 -1
index 8bdbbfc322ad..76dec0bd4f59 100644
@@ -48,7 +48,6 @@ extern pte_t *pkmap_page_table;
 
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
-extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 
 #define flush_cache_kmaps()	BUG_ON(cpu_has_dc_aliases)
arch/mips/mm/cache.c +2 -2
index f015bb51fab0..1873c2a01fdb 100644
@@ -104,7 +104,7 @@ void __flush_dcache_page(struct page *page)
 	flush_data_cache_page(addr);
 
 	if (PageHighMem(page))
-		__kunmap_atomic((void *)addr);
+		kunmap_atomic((void *)addr);
 }
 
 EXPORT_SYMBOL(__flush_dcache_page);
@@ -147,7 +147,7 @@ void __update_cache(unsigned long address, pte_t pte)
 			flush_data_cache_page(addr);
 
 		if (PageHighMem(page))
-			__kunmap_atomic((void *)addr);
+			kunmap_atomic((void *)addr);
 
 		ClearPageDcacheDirty(page);
 	}
arch/mips/mm/highmem.c +2 -4
index 2bda56372995..155fbb107b35 100644
@@ -36,7 +36,7 @@ void *kmap_atomic_high(struct page *page)
 }
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int type __maybe_unused;
@@ -63,10 +63,8 @@ void __kunmap_atomic(void *kvaddr)
 	}
 #endif
 	kmap_atomic_idx_pop();
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
arch/nds32/include/asm/highmem.h +0 -1
index a3970e566ede..4d21308549c9 100644
@@ -51,7 +51,6 @@ extern void kmap_init(void);
  * when CONFIG_HIGHMEM is not set.
  */
 #ifdef CONFIG_HIGHMEM
-extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
 extern struct page *kmap_atomic_to_page(void *ptr);
 #endif
arch/nds32/mm/highmem.c +2 -4
index f5f3a21460c4..f6e6915c0d31 100644
@@ -34,7 +34,7 @@ void *kmap_atomic_high(struct page *page)
 
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	if (kvaddr >= (void *)FIXADDR_START) {
 		unsigned long vaddr = (unsigned long)kvaddr;
@@ -45,8 +45,6 @@ void __kunmap_atomic(void *kvaddr)
 		ptep = pte_offset_kernel(pmd_off_k(vaddr), vaddr);
 		set_pte(ptep, 0);
 	}
-	pagefault_enable();
-	preempt_enable();
 }
 
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
arch/parisc/include/asm/cacheflush.h +1 -3
index 0c83644bfa5c..119c9a7681bc 100644
@@ -122,11 +122,9 @@ static inline void *kmap_atomic(struct page *page)
 	return page_address(page);
 }
 
-static inline void __kunmap_atomic(void *addr)
+static inline void kunmap_atomic_high(void *addr)
 {
 	flush_kernel_dcache_page_addr(addr);
-	pagefault_enable();
-	preempt_enable();
 }
 
 #define kmap_atomic_prot(page, prot)	kmap_atomic(page)
arch/powerpc/include/asm/highmem.h +0 -1
index 74fa2c726fde..373a470df205 100644
@@ -69,7 +69,6 @@ static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 
 	return kmap_atomic_high_prot(page, prot);
 }
-extern void __kunmap_atomic(void *kvaddr);
 
 static inline void *kmap_atomic_high(struct page *page)
 {
arch/powerpc/mm/highmem.c +2 -4
index 67aaa5217f7f..35071c2913f1 100644
@@ -40,7 +40,7 @@ void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 }
 EXPORT_SYMBOL(kmap_atomic_high_prot);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 
@@ -66,7 +66,5 @@ void __kunmap_atomic(void *kvaddr)
 	}
 
 	kmap_atomic_idx_pop();
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
arch/sparc/include/asm/highmem.h +0 -2
index 458210c5bc38..f4babe67cb5d 100644
@@ -50,8 +50,6 @@ void kmap_init(void) __init;
 
 #define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
 
-void __kunmap_atomic(void *kvaddr);
-
 #define flush_cache_kmaps()	flush_cache_all()
 
 #endif /* __KERNEL__ */
arch/sparc/mm/highmem.c +2 -4
index b53070ab6a31..469786bc430f 100644
@@ -84,7 +84,7 @@ void *kmap_atomic_high(struct page *page)
 }
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int type;
@@ -126,7 +126,5 @@ void __kunmap_atomic(void *kvaddr)
 #endif
 
 	kmap_atomic_idx_pop();
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
arch/x86/include/asm/highmem.h +0 -1
index 9393d55a2adb..be66b77885a0 100644
@@ -72,7 +72,6 @@ static inline void *kmap_atomic_high(struct page *page)
 {
 	return kmap_atomic_high_prot(page, kmap_prot);
 }
-void __kunmap_atomic(void *kvaddr);
 void *kmap_atomic_pfn(unsigned long pfn);
 void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
 
arch/x86/mm/highmem_32.c +2 -5
index c3e272a759e0..075fe51317b0 100644
@@ -30,7 +30,7 @@ void *kmap_atomic_pfn(unsigned long pfn)
 }
 EXPORT_SYMBOL_GPL(kmap_atomic_pfn);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 
@@ -60,11 +60,8 @@ void __kunmap_atomic(void *kvaddr)
 		BUG_ON(vaddr >= (unsigned long)high_memory);
 	}
 #endif
-
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
 
 void __init set_highmem_pages_init(void)
 {
arch/xtensa/include/asm/highmem.h +0 -2
index 1e6aa15c4bdf..d6a10704307a 100644
@@ -68,8 +68,6 @@ static inline void flush_cache_kmaps(void)
 	flush_cache_all();
 }
 
-void __kunmap_atomic(void *kvaddr);
-
 void kmap_init(void);
 
 #endif
arch/xtensa/mm/highmem.c +2 -5
index 90b85a897cb0..4de323e43682 100644
@@ -54,7 +54,7 @@ void *kmap_atomic_high(struct page *page)
 }
 EXPORT_SYMBOL(kmap_atomic_high);
 
-void __kunmap_atomic(void *kvaddr)
+void kunmap_atomic_high(void *kvaddr)
 {
 	if (kvaddr >= (void *)FIXADDR_START &&
 	    kvaddr < (void *)FIXADDR_TOP) {
@@ -73,11 +73,8 @@ void __kunmap_atomic(void *kvaddr)
 
 		kmap_atomic_idx_pop();
 	}
-
-	pagefault_enable();
-	preempt_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_high);
 
 void __init kmap_init(void)
 {
include/linux/highmem.h +7 -4
index 86b93dee758a..c36c0ee09423 100644
@@ -33,6 +33,7 @@ static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
 
 #ifdef CONFIG_HIGHMEM
 extern void *kmap_atomic_high(struct page *page);
+extern void kunmap_atomic_high(void *kvaddr);
 #include <asm/highmem.h>
 
 #ifndef ARCH_HAS_KMAP_FLUSH_TLB
@@ -146,10 +147,10 @@ static inline void *kmap_atomic(struct page *page)
 }
 #define kmap_atomic_prot(page, prot)	kmap_atomic(page)
 
-static inline void __kunmap_atomic(void *addr)
+static inline void kunmap_atomic_high(void *addr)
 {
-	pagefault_enable();
-	preempt_enable();
+	/* Nothing to do in the CONFIG_HIGHMEM=n case as kunmap_atomic()
+	 * handles re-enabling faults + preemption */
 }
 
 #define kmap_atomic_pfn(pfn)	kmap_atomic(pfn_to_page(pfn))
@@ -199,7 +200,9 @@ static inline void kmap_atomic_idx_pop(void)
 #define kunmap_atomic(addr)                                     \
 do {                                                            \
 	BUILD_BUG_ON(__same_type((addr), struct page *));       \
-	__kunmap_atomic(addr);                                  \
+	kunmap_atomic_high(addr);                                  \
+	pagefault_enable();                                     \
+	preempt_enable();                                       \
 } while (0)
 
 
Signature · 1 line
2.25.1
#8 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

Quoted 7 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();
Quoted 8 lines

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

This patch results in:

Starting init: /bin/sh exists but couldn't execute it (error -14)

when trying to boot microblazeel:petalogix-ml605 in qemu.

Bisect log attached.

Guenter

---
# bad: [bdecf38f228bcca73b31ada98b5b7ba1215eb9c9] Add linux-next specific files for 20200515
# good: [2ef96a5bb12be62ef75b5828c0aab838ebb29cb8] Linux 5.7-rc5
git bisect start 'HEAD' 'v5.7-rc5'
# good: [3674d7aa7a8e61d993886c2fb7c896c5ef85e988] Merge remote-tracking branch 'crypto/master' git bisect good 3674d7aa7a8e61d993886c2fb7c896c5ef85e988
# good: [87f6f21783522e6d62127cf33ae5e95f50874beb] Merge remote-tracking branch 'spi/for-next'
git bisect good 87f6f21783522e6d62127cf33ae5e95f50874beb
# good: [5c428e8277d5d97c85126387d4e00aa5adde4400] Merge remote-tracking branch 'staging/staging-next' git bisect good 5c428e8277d5d97c85126387d4e00aa5adde4400
# good: [f68de67ed934e7bdef4799fd7777c86f33f14982] Merge remote-tracking branch 'hyperv/hyperv-next' git bisect good f68de67ed934e7bdef4799fd7777c86f33f14982
# bad: [54acd2dc52b069da59639eea0d0c92726f32fb01] mm/memblock: fix a typo in comment "implict"->"implicit" git bisect bad 54acd2dc52b069da59639eea0d0c92726f32fb01
# good: [784a17aa58a529b84f7cc50f351ed4acf3bd11f3] mm: remove the pgprot argument to __vmalloc
git bisect good 784a17aa58a529b84f7cc50f351ed4acf3bd11f3
# good: [6cd8137ff37e9a37aee2d2a8889c8beb8eab192f] khugepaged: replace the usage of system(3) in the test git bisect good 6cd8137ff37e9a37aee2d2a8889c8beb8eab192f
# bad: [6987da379826ed01b8a1cf046b67cc8cc10117cc] sparc: remove unnecessary includes
git bisect bad 6987da379826ed01b8a1cf046b67cc8cc10117cc
# good: [bc17b545388f64c09e83e367898e28f60277c584] mm/hugetlb: define a generic fallback for is_hugepage_only_range() git bisect good bc17b545388f64c09e83e367898e28f60277c584
# bad: [9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011] arch-kmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect bad 9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011
# good: [0941a38ff0790c1004270f952067a5918a4ba32d] arch/kmap: remove redundant arch specific kmaps git bisect good 0941a38ff0790c1004270f952067a5918a4ba32d
# good: [56e635a64c2cbfa815c851af10e0f811e809977b] arch-kunmap-remove-duplicate-kunmap-implementations-fix git bisect good 56e635a64c2cbfa815c851af10e0f811e809977b
# bad: [60f96b2233c790d4f1c49317643051f1670bcb29] arch/kmap_atomic: consolidate duplicate code
git bisect bad 60f96b2233c790d4f1c49317643051f1670bcb29
# good: [7b3708dc3bf72a647243064fe7ddf9a76248ddfd] {x86,powerpc,microblaze}/kmap: move preempt disable git bisect good 7b3708dc3bf72a647243064fe7ddf9a76248ddfd

# first bad commit: [60f96b2233c790d4f1c49317643051f1670bcb29] arch/kmap_atomic: consolidate duplicate code
author Reviewed-by Christoph Hellwig
#9 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

Quoted 14 lines · Guenter Roeck
Quoted 13 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

Quoted 8 lines
Quoted 2 lines

This patch results in:

Starting init: /bin/sh exists but couldn't execute it (error -14)

when trying to boot microblazeel:petalogix-ml605 in qemu.

Thanks for the report. I'm not readily seeing the issue.

Do you have a kernel config? Specifically is CONFIG_HIGHMEM set?

Quoted 37 lines

Bisect log attached.

Guenter

---
# bad: [bdecf38f228bcca73b31ada98b5b7ba1215eb9c9] Add linux-next specific files for 20200515
# good: [2ef96a5bb12be62ef75b5828c0aab838ebb29cb8] Linux 5.7-rc5
git bisect start 'HEAD' 'v5.7-rc5'
# good: [3674d7aa7a8e61d993886c2fb7c896c5ef85e988] Merge remote-tracking branch 'crypto/master' git bisect good 3674d7aa7a8e61d993886c2fb7c896c5ef85e988
# good: [87f6f21783522e6d62127cf33ae5e95f50874beb] Merge remote-tracking branch 'spi/for-next'
git bisect good 87f6f21783522e6d62127cf33ae5e95f50874beb
# good: [5c428e8277d5d97c85126387d4e00aa5adde4400] Merge remote-tracking branch 'staging/staging-next' git bisect good 5c428e8277d5d97c85126387d4e00aa5adde4400
# good: [f68de67ed934e7bdef4799fd7777c86f33f14982] Merge remote-tracking branch 'hyperv/hyperv-next' git bisect good f68de67ed934e7bdef4799fd7777c86f33f14982
# bad: [54acd2dc52b069da59639eea0d0c92726f32fb01] mm/memblock: fix a typo in comment "implict"->"implicit" git bisect bad 54acd2dc52b069da59639eea0d0c92726f32fb01
# good: [784a17aa58a529b84f7cc50f351ed4acf3bd11f3] mm: remove the pgprot argument to __vmalloc
git bisect good 784a17aa58a529b84f7cc50f351ed4acf3bd11f3
# good: [6cd8137ff37e9a37aee2d2a8889c8beb8eab192f] khugepaged: replace the usage of system(3) in the test git bisect good 6cd8137ff37e9a37aee2d2a8889c8beb8eab192f
# bad: [6987da379826ed01b8a1cf046b67cc8cc10117cc] sparc: remove unnecessary includes
git bisect bad 6987da379826ed01b8a1cf046b67cc8cc10117cc
# good: [bc17b545388f64c09e83e367898e28f60277c584] mm/hugetlb: define a generic fallback for is_hugepage_only_range() git bisect good bc17b545388f64c09e83e367898e28f60277c584
# bad: [9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011] arch-kmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect bad 9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011
# good: [0941a38ff0790c1004270f952067a5918a4ba32d] arch/kmap: remove redundant arch specific kmaps git bisect good 0941a38ff0790c1004270f952067a5918a4ba32d
# good: [56e635a64c2cbfa815c851af10e0f811e809977b] arch-kunmap-remove-duplicate-kunmap-implementations-fix git bisect good 56e635a64c2cbfa815c851af10e0f811e809977b
# bad: [60f96b2233c790d4f1c49317643051f1670bcb29] arch/kmap_atomic: consolidate duplicate code
git bisect bad 60f96b2233c790d4f1c49317643051f1670bcb29
# good: [7b3708dc3bf72a647243064fe7ddf9a76248ddfd] {x86,powerpc,microblaze}/kmap: move preempt disable git bisect good 7b3708dc3bf72a647243064fe7ddf9a76248ddfd

Quoted 1 line
# first bad commit: [60f96b2233c790d4f1c49317643051f1670bcb29] arch/kmap_atomic: consolidate duplicate code

I'm confused by this. This points to an earlier commit being bad?

commit 60f96b2233c790d4f1c49317643051f1670bcb29

Author: Ira Weiny <[email protected]>                                         
Date:   Thu May 14 13:39:54 2020 +1000                                          

arch/kmap_atomic: consolidate duplicate code

Every arch has the same code to ensure atomic operations and a check for !HIGHMEM page.

Remove the duplicate code by defining a core kmap_atomic() which only calls the arch specific kmap_atomic_high() when the page is high memory.

Cc Al Viro <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Christian König <[email protected]>
Cc Chris Zankel <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Dan Williams <[email protected]>
Cc Dave Hansen <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Helge Deller <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc "James E.J. Bottomley" <[email protected]>
Cc Max Filippov <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Thomas Gleixner <[email protected]>

Any idea which one it is?

Ira

#10 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

Quoted 20 lines · Ira Weiny
Quoted 19 lines · Guenter Roeck
Quoted 7 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();
Quoted 8 lines

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

This patch results in:

Quoted 8 lines
Quoted 3 lines

Starting init: /bin/sh exists but couldn't execute it (error -14)

when trying to boot microblazeel:petalogix-ml605 in qemu.

Thanks for the report. I'm not readily seeing the issue.

Do you have a kernel config? Specifically is CONFIG_HIGHMEM set?

See below. Yes, CONFIG_HIGHMEM is set.

The scripts used to build and boot the image are at:

https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel

Hope this helps,

Guenter

---
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BASE_FULL is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_KERNEL_BASE_ADDR=0x50000000
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
CONFIG_XILINX_MICROBLAZE0_HW_VER="10.0.a"
CONFIG_HZ_100=y
CONFIG_MMU=y
CONFIG_HIGHMEM=y
CONFIG_PCI_XILINX=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_EFI_PARTITION is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_BRIDGE=m
CONFIG_PCI=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE���92
CONFIG_NETDEVICES=y
CONFIG_XILINX_EMACLITE=y
CONFIG_XILINX_LL_TEMAC=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_XILINX_HWICAP=y
CONFIG_I2C=y
CONFIG_I2C_XILINX=y
CONFIG_SPI=y
CONFIG_SPI_XILINX=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_XILINX=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_XILINX=y
# CONFIG_USB_SUPPORT is not set
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS2=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_DEBUG_INFO=y
CONFIG_KGDB=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_KDB=y
CONFIG_DEBUG_SLAB=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_SPINLOCK=y

author
#11 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

Quoted 29 lines · Guenter Roeck
Quoted 20 lines · Ira Weiny
Quoted 19 lines · Guenter Roeck
Quoted 7 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();
Quoted 8 lines

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

This patch results in:

Quoted 8 lines
Quoted 3 lines

Starting init: /bin/sh exists but couldn't execute it (error -14)

when trying to boot microblazeel:petalogix-ml605 in qemu.

Thanks for the report. I'm not readily seeing the issue.

Do you have a kernel config? Specifically is CONFIG_HIGHMEM set?

Quoted 7 lines

See below. Yes, CONFIG_HIGHMEM is set.

The scripts used to build and boot the image are at:

https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel

Hope this helps,

Thank you ...

Could you try the following patch?

commit 82c284b2bb74ca195dfcd35b70a175f010b9fd46 (HEAD -> lm-kmap17)

Author: Ira Weiny <[email protected]>
Date:   Mon May 18 11:01:10 2020 -0700

microblaze/kmap: Don't enable pagefault/preempt twice

The kunmap_atomic clean up failed to remove the pagefault/preempt enables on this path.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
arch/microblaze/mm/highmem.c +1 -4
index ee8a422b2b76..92e0890416c9 100644
@@ -57,11 +57,8 @@ void kunmap_atomic_high(void *kvaddr)
        int type;
        unsigned int idx;
 
-       if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-               pagefault_enable();
-               preempt_enable();
+       if (vaddr < __fix_to_virt(FIX_KMAP_END))
                return;
-       }
 
        type = kmap_atomic_idx();
 
author
#12 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

In reply to Guenter Roeck
Quoted 27 lines · Guenter Roeck
Quoted 26 lines · Ira Weiny
Quoted 14 lines · Guenter Roeck
Quoted 13 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

Quoted 8 lines
Quoted 2 lines

This patch results in:

Starting init: /bin/sh exists but couldn't execute it (error -14)

when trying to boot microblazeel:petalogix-ml605 in qemu.

Thanks for the report. I'm not readily seeing the issue.

Quoted 7 lines
Quoted 2 lines

Do you have a kernel config? Specifically is CONFIG_HIGHMEM set?

See below. Yes, CONFIG_HIGHMEM is set.

The scripts used to build and boot the image are at:

https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel

Despite finding the obvious error earlier today I've still been trying to get this to work.

I had to make some slight modifications to use the 0-day cross compile build and my local qemu build. But those were pretty minor modifications. I'm running on x86_64 host.

With those slight mods to the scripts I get the following error even without my patch set on 5.7-rc4. I have 1 cpu pegged at 100% while it is running... Is there anything I can do to get more debug output? Perhaps I just need to let it run longer?

Thanks,
Ira

16:46:54 > ../linux-build-test/rootfs/microblazeel/run-qemu-microblazeel.sh Build reference: v5.7-rc4-2-g7c2411d7fb6a

Building microblaze:petalogix-s3adsp1800:qemu_microblazeel_defconfig ... running ................ failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3277686 (/bin/bash)
------------
Building microblaze:petalogix-ml605:qemu_microblazeel_ml605_defconfig ... running ................ failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3277686 (/bin/bash)
------------

<env changes>
16:47:23 > git di

rootfs/microblazeel/run-qemu-microblazeel.sh +2 -1
index 68d4de39ab50..0d6a4f85308f 100755
@@ -3,7 +3,8 @@
 dir=$(cd $(dirname $0); pwd)
 . ${dir}/../scripts/common.sh
 
-QEMU=${QEMU:-${QEMU_BIN}/qemu-system-microblazeel}
+#QEMU=${QEMU:-${QEMU_BIN}/qemu-system-microblazeel}
+QEMU=/home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
 PREFIX=microblazeel-linux-
 ARCH=microblaze
 PATH_MICROBLAZE=/opt/kernel/microblazeel/gcc-4.9.1/usr/bin
rootfs/scripts/common.sh +8 -4
index 8fa6a9be2b2f..c4550a27beaa 100644
@@ -1,5 +1,9 @@
 #!/bin/bash
 
+# Set up make.cross
+export COMPILER_INSTALL_PATH=$HOME/0day
+export GCC_VERSION=6.5.0
+
 # Set the following variable to true to skip DC395/AM53C97 build tests
 __skip_dc395=0
 
@@ -569,7 +573,7 @@ doclean()
        then
                git clean -x -d -f -q
        else
-               make ARCH=${ARCH} mrproper >/dev/null 2>&1
+               make.cross ARCH=${ARCH} mrproper >/dev/null 2>&1
        fi
 }
 
@@ -669,7 +673,7 @@ __setup_config()
        cp ${__progdir}/${defconfig} arch/${arch}/configs
     fi
 
-    if ! make ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${defconfig} >/dev/null 2>&1 </dev/null; then
+    if ! make.cross ARCH=${ARCH} ${defconfig} >/dev/null 2>&1 </dev/null; then
        return 2
     fi
 
@@ -687,7 +691,7 @@ __setup_config()
        if [[ "${rel}" = "v3.16" ]]; then
            target="oldconfig"
        fi
-       if ! make ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${target} >/dev/null 2>&1 </dev/null; then
+       if ! make.cross ARCH=${ARCH} ${target} >/dev/null 2>&1 </dev/null; then
            return 1
        fi
     fi
@@ -1038,7 +1042,7 @@ dosetup()
     rootfs="$(setup_rootfs ${dynamic} ${rootfs})"
     __common_fixups "${fixups}" "${rootfs}"
 
-    make -j${maxload} ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${EXTRAS} </dev/null >/dev/null 2>${logfile}
+    make.cross -j${maxload} ARCH=${ARCH} ${EXTRAS} </dev/null >/dev/null 2>${logfile}
     rv=$?
     if [ ${rv} -ne 0 ]
     then

</env changes>

#13 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

Hi Ira,

Quoted 39 lines · Ira Weiny
Quoted 27 lines · Guenter Roeck
Quoted 26 lines · Ira Weiny
Quoted 14 lines · Guenter Roeck
Quoted 13 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();

... before returning from __kunmap_atomic(). Lift this code into the kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to be consistent.

Quoted 8 lines
Quoted 2 lines

This patch results in:

Starting init: /bin/sh exists but couldn't execute it (error -14)

when trying to boot microblazeel:petalogix-ml605 in qemu.

Thanks for the report. I'm not readily seeing the issue.

Quoted 7 lines
Quoted 2 lines

Do you have a kernel config? Specifically is CONFIG_HIGHMEM set?

See below. Yes, CONFIG_HIGHMEM is set.

The scripts used to build and boot the image are at:

https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel

Despite finding the obvious error earlier today I've still been trying to get this to work.

Quoted 9 lines

I had to make some slight modifications to use the 0-day cross compile build and my local qemu build. But those were pretty minor modifications. I'm running on x86_64 host.

With those slight mods to the scripts I get the following error even without my patch set on 5.7-rc4. I have 1 cpu pegged at 100% while it is running... Is there anything I can do to get more debug output? Perhaps I just need to let it run longer?

I don't think so. Try running it with "-d" parameter (run-qemu-microblazeel.sh -d petalogix-s3adsp1800); that gives you the qemu command line. Once it says "running", abort the script and execute qemu directly. Oh, and please update the repository; turns out I didn't push for a while and made a number of changes.

My compiler was compiled with buildroot (a long time ago). I don't recall if it needed something special in the configuration, unfortunately.

Guenter

Quoted 88 lines

Thanks,
Ira

16:46:54 > ../linux-build-test/rootfs/microblazeel/run-qemu-microblazeel.sh Build reference: v5.7-rc4-2-g7c2411d7fb6a

Building microblaze:petalogix-s3adsp1800:qemu_microblazeel_defconfig ... running ................ failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3277686 (/bin/bash)
------------
Building microblaze:petalogix-ml605:qemu_microblazeel_ml605_defconfig ... running ................ failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3277686 (/bin/bash)
------------

<env changes>
16:47:23 > git di

rootfs/microblazeel/run-qemu-microblazeel.sh +2 -1
index 68d4de39ab50..0d6a4f85308f 100755
@@ -3,7 +3,8 @@
 dir=$(cd $(dirname $0); pwd)
 . ${dir}/../scripts/common.sh
 
-QEMU=${QEMU:-${QEMU_BIN}/qemu-system-microblazeel}
+#QEMU=${QEMU:-${QEMU_BIN}/qemu-system-microblazeel}
+QEMU=/home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
 PREFIX=microblazeel-linux-
 ARCH=microblaze
 PATH_MICROBLAZE=/opt/kernel/microblazeel/gcc-4.9.1/usr/bin
rootfs/scripts/common.sh +8 -4
index 8fa6a9be2b2f..c4550a27beaa 100644
@@ -1,5 +1,9 @@
 #!/bin/bash
 
+# Set up make.cross
+export COMPILER_INSTALL_PATH=$HOME/0day
+export GCC_VERSION=6.5.0
+
 # Set the following variable to true to skip DC395/AM53C97 build tests
 __skip_dc395=0
 
@@ -569,7 +573,7 @@ doclean()
        then
                git clean -x -d -f -q
        else
-               make ARCH=${ARCH} mrproper >/dev/null 2>&1
+               make.cross ARCH=${ARCH} mrproper >/dev/null 2>&1
        fi
 }
 
@@ -669,7 +673,7 @@ __setup_config()
        cp ${__progdir}/${defconfig} arch/${arch}/configs
     fi
 
-    if ! make ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${defconfig} >/dev/null 2>&1 </dev/null; then
+    if ! make.cross ARCH=${ARCH} ${defconfig} >/dev/null 2>&1 </dev/null; then
        return 2
     fi
 
@@ -687,7 +691,7 @@ __setup_config()
        if [[ "${rel}" = "v3.16" ]]; then
            target="oldconfig"
        fi
-       if ! make ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${target} >/dev/null 2>&1 </dev/null; then
+       if ! make.cross ARCH=${ARCH} ${target} >/dev/null 2>&1 </dev/null; then
            return 1
        fi
     fi
@@ -1038,7 +1042,7 @@ dosetup()
     rootfs="$(setup_rootfs ${dynamic} ${rootfs})"
     __common_fixups "${fixups}" "${rootfs}"
 
-    make -j${maxload} ARCH=${ARCH} CROSS_COMPILE=${PREFIX} ${EXTRAS} </dev/null >/dev/null 2>${logfile}
+    make.cross -j${maxload} ARCH=${ARCH} ${EXTRAS} </dev/null >/dev/null 2>${logfile}
     rv=$?
     if [ ${rv} -ne 0 ]
     then

</env changes>

author
#14 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

Quoted 10 lines · Guenter Roeck

Hi Ira,

Quoted 7 lines · Ira Weiny
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · Ira Weiny
Quoted 3 lines · Guenter Roeck
Quoted 2 lines · On Thu, May 07, 2020 at 07:59:55AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

Sorry for the delay I missed this email last night... I blame outlook... ;-)

...

Quoted 21 lines
Quoted 11 lines
Quoted 7 lines
Quoted 2 lines

Do you have a kernel config? Specifically is CONFIG_HIGHMEM set?

See below. Yes, CONFIG_HIGHMEM is set.

The scripts used to build and boot the image are at:

https://github.com/groeck/linux-build-test/tree/master/rootfs/microblazeel

Despite finding the obvious error earlier today I've still been trying to get this to work.

Quoted 9 lines

I had to make some slight modifications to use the 0-day cross compile build and my local qemu build. But those were pretty minor modifications. I'm running on x86_64 host.

With those slight mods to the scripts I get the following error even without my patch set on 5.7-rc4. I have 1 cpu pegged at 100% while it is running... Is there anything I can do to get more debug output? Perhaps I just need to let it run longer?

Quoted 3 lines

I don't think so. Try running it with "-d" parameter (run-qemu-microblazeel.sh -d petalogix-s3adsp1800); that gives you the qemu command line. Once it says "running", abort the script and execute qemu directly.

FYI Minor nit... a simple copy/paste failed... that print of the cmd line did not include quotes around the -append text:

09:06:03 > /home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
-M petalogix-s3adsp1800 -m 256 -kernel arch/microblaze/boot/linux.bin -no-reboot -initrd /tmp/buildbot-cache/microblazeel/rootfs.cpio -append panic=-1 slub_debug=FZPUA rdinit=/sbin/init console=ttyUL0,115200 -monitor none -serial stdio -nographic

qemu-system-microblazeel: slub_debug=FZPUA: Could not open 'slub_debug=FZPUA': No such file or directory

Quoted 3 lines

Oh, and please update
the repository; turns out I didn't push for a while and made a number of changes.

Cool beans... I've updated.

Quoted 3 lines

My compiler was compiled with buildroot (a long time ago). I don't recall if it needed something special in the configuration, unfortunately.

AFAICT the compile is working... It is running from the command line now... I expected it to be slow so I have also increased the timeouts last night. So far it still fails. I did notice that there is a new 'R' in the wait output.

<quote>
.........................R......................... failed (silent)
------------
qemu log:
qemu-system-microblazeel: terminating on signal 15 from pid 3357146 (/bin/bash) </quote>

I was hoping that meant it found qemu 'running' but looks like that was just a retry... :-(

Last night I increased some of the timeouts I could find.

<quote>
LOOPTIME=5 # Wait time before checking status

 -MAXTIME0    # Maximum wait time for qemu session to complete
 -MAXSTIME`    # Maximum wait time for qemu session to generate output
 +#MAXTIME0   # Maximum wait time for qemu session to complete
 +#MAXSTIME`   # Maximum wait time for qemu session to generate output
 +MAXTIME00    # Maximum wait time for qemu session to complete
 +MAXSTIME0   # Maximum wait time for qemu session to generate output

</quote>

But thanks to the qemu command line hint I can see these were not nearly enough... (It has been running for > 20 minutes... and I'm not getting output...) Or I've done something really wrong. Shouldn't qemu be at least showing something on the terminal by now? I normally run qemu with different display options (and my qemu foo is weak) so I'm not sure what I should be seeing with this command line.

09:06:28 > /home/iweiny/dev/qemu/microblazeel-softmmu/qemu-system-microblazeel
-M petalogix-s3adsp1800 -m 256 -kernel arch/microblaze/boot/linux.bin -no-reboot -initrd /tmp/buildbot-cache/microblazeel/rootfs.cpio -append "panic=-1 slub_debug=FZPUA rdinit=/sbin/init console=ttyUL0,115200" -monitor none -serial stdio -nographic

Maybe I just have too slow of a machine... :-/

My qemu was built back in March. I'm updating that now...

Sorry for being so dense...
Ira

#15 lore raw

Re: [PATCH V3 07/15] arch/kunmap_atomic: Consolidate duplicate code

In reply to Ira Weiny

On Sun, May 17, 2020 at 08:49:39PM -0700, Ira Weiny wrote:

[ ... ]

Quoted 35 lines
Quoted 33 lines

---
# bad: [bdecf38f228bcca73b31ada98b5b7ba1215eb9c9] Add linux-next specific files for 20200515
# good: [2ef96a5bb12be62ef75b5828c0aab838ebb29cb8] Linux 5.7-rc5
git bisect start 'HEAD' 'v5.7-rc5'
# good: [3674d7aa7a8e61d993886c2fb7c896c5ef85e988] Merge remote-tracking branch 'crypto/master' git bisect good 3674d7aa7a8e61d993886c2fb7c896c5ef85e988
# good: [87f6f21783522e6d62127cf33ae5e95f50874beb] Merge remote-tracking branch 'spi/for-next'
git bisect good 87f6f21783522e6d62127cf33ae5e95f50874beb
# good: [5c428e8277d5d97c85126387d4e00aa5adde4400] Merge remote-tracking branch 'staging/staging-next' git bisect good 5c428e8277d5d97c85126387d4e00aa5adde4400
# good: [f68de67ed934e7bdef4799fd7777c86f33f14982] Merge remote-tracking branch 'hyperv/hyperv-next' git bisect good f68de67ed934e7bdef4799fd7777c86f33f14982
# bad: [54acd2dc52b069da59639eea0d0c92726f32fb01] mm/memblock: fix a typo in comment "implict"->"implicit" git bisect bad 54acd2dc52b069da59639eea0d0c92726f32fb01
# good: [784a17aa58a529b84f7cc50f351ed4acf3bd11f3] mm: remove the pgprot argument to __vmalloc
git bisect good 784a17aa58a529b84f7cc50f351ed4acf3bd11f3
# good: [6cd8137ff37e9a37aee2d2a8889c8beb8eab192f] khugepaged: replace the usage of system(3) in the test git bisect good 6cd8137ff37e9a37aee2d2a8889c8beb8eab192f
# bad: [6987da379826ed01b8a1cf046b67cc8cc10117cc] sparc: remove unnecessary includes
git bisect bad 6987da379826ed01b8a1cf046b67cc8cc10117cc
# good: [bc17b545388f64c09e83e367898e28f60277c584] mm/hugetlb: define a generic fallback for is_hugepage_only_range() git bisect good bc17b545388f64c09e83e367898e28f60277c584
# bad: [9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011] arch-kmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect bad 9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011
# good: [0941a38ff0790c1004270f952067a5918a4ba32d] arch/kmap: remove redundant arch specific kmaps git bisect good 0941a38ff0790c1004270f952067a5918a4ba32d
# good: [56e635a64c2cbfa815c851af10e0f811e809977b] arch-kunmap-remove-duplicate-kunmap-implementations-fix git bisect good 56e635a64c2cbfa815c851af10e0f811e809977b
# bad: [60f96b2233c790d4f1c49317643051f1670bcb29] arch/kmap_atomic: consolidate duplicate code
git bisect bad 60f96b2233c790d4f1c49317643051f1670bcb29
# good: [7b3708dc3bf72a647243064fe7ddf9a76248ddfd] {x86,powerpc,microblaze}/kmap: move preempt disable git bisect good 7b3708dc3bf72a647243064fe7ddf9a76248ddfd

Quoted 1 line
# first bad commit: [60f96b2233c790d4f1c49317643051f1670bcb29] arch/kmap_atomic: consolidate duplicate code
Quoted 2 lines

I'm confused by this. This points to an earlier commit being bad?

Yes, you are correct. I was looking up the wrong commit; it had a similar subject line. Sorry for the confusion.

Guenter

#16 lore raw

PATCH 1/1 arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to [email protected]

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
---
 arch/microblaze/mm/highmem.c | 5 +----
 arch/mips/mm/highmem.c       | 5 +----
 arch/powerpc/mm/highmem.c    | 5 +----
 arch/sparc/mm/highmem.c      | 5 +----
 4 files changed, 4 insertions(+), 16 deletions(-)
arch/microblaze/mm/highmem.c +1 -4
index ee8a422b2b76..92e0890416c9 100644
@@ -57,11 +57,8 @@ void kunmap_atomic_high(void *kvaddr)
 	int type;
 	unsigned int idx;
 
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		preempt_enable();
+	if (vaddr < __fix_to_virt(FIX_KMAP_END))
 		return;
-	}
 
 	type = kmap_atomic_idx();
 
arch/mips/mm/highmem.c +1 -4
index 37e244cdb14e..8e8726992720 100644
@@ -41,11 +41,8 @@ void kunmap_atomic_high(void *kvaddr)
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int type __maybe_unused;
 
-	if (vaddr < FIXADDR_START) { // FIXME
-		pagefault_enable();
-		preempt_enable();
+	if (vaddr < FIXADDR_START)
 		return;
-	}
 
 	type = kmap_atomic_idx();
 #ifdef CONFIG_DEBUG_HIGHMEM
arch/powerpc/mm/highmem.c +1 -4
index 35071c2913f1..624b4438aff9 100644
@@ -44,11 +44,8 @@ void kunmap_atomic_high(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		preempt_enable();
+	if (vaddr < __fix_to_virt(FIX_KMAP_END))
 		return;
-	}
 
 	if (IS_ENABLED(CONFIG_DEBUG_HIGHMEM)) {
 		int type = kmap_atomic_idx();
arch/sparc/mm/highmem.c +1 -4
index d237d902f9c3..6ff6e2a9f9b3 100644
@@ -86,11 +86,8 @@ void kunmap_atomic_high(void *kvaddr)
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	int type;
 
-	if (vaddr < FIXADDR_START) { // FIXME
-		pagefault_enable();
-		preempt_enable();
+	if (vaddr < FIXADDR_START)
 		return;
-	}
 
 	type = kmap_atomic_idx();
 
Signature · 1 line
2.25.1
#17 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")

microblazeel works with this patch, as do the nosmp sparc32 boot tests, but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Still testing ppc images.

Guenter

author
#18 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 10 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,
Ira

Quoted 32 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Still testing ppc images.

Guenter

#19 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 10 lines · Ira Weiny
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 6 lines
Quoted 1 line

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,

No worries.

Quoted 33 lines

Ira

Quoted 31 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Still testing ppc images.

ppc image tests are passing with this patch.

Guenter

author
#20 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Ira Weiny
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 36 lines
Quoted 6 lines
Quoted 1 line

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,

No worries.

Quoted 27 lines

Ira

Quoted 25 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

I'm really not seeing how this is related to the kmap clean up.

But just to make sure I'm trying to run your environment for sparc and having less luck than with microblaze.

Could you give me the command which is failing above?

Ira

Quoted 10 lines
Quoted 6 lines
Quoted 6 lines

Code path leading to that message is different but always the same from free_unref_page().

Still testing ppc images.

ppc image tests are passing with this patch.

Guenter

author
#21 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Guenter Roeck
Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Ira Weiny
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 39 lines
Quoted 6 lines
Quoted 1 line

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,

No worries.

Quoted 30 lines

Ira

Quoted 28 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

Alternately I will need to figure out how to run the sparc on qemu here...

Thanks very much for all the testing though! :-D

Ira

Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

Still testing ppc images.

ppc image tests are passing with this patch.

Guenter

#22 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 52 lines · Ira Weiny
Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Ira Weiny
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 39 lines
Quoted 6 lines
Quoted 1 line

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,

No worries.

Quoted 30 lines

Ira

Quoted 28 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Quoted 7 lines

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

Guenter

Quoted 13 lines

Alternately I will need to figure out how to run the sparc on qemu here...

Thanks very much for all the testing though! :-D

Ira

Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

Still testing ppc images.

ppc image tests are passing with this patch.

Guenter

author
#23 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 56 lines · Guenter Roeck
Quoted 55 lines · Ira Weiny
Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Ira Weiny
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 39 lines
Quoted 6 lines
Quoted 1 line

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,

No worries.

Quoted 30 lines

Ira

Quoted 28 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Quoted 6 lines
Quoted 4 lines

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Is there another test I need to run?

Ira

Quoted 17 lines

Guenter

Quoted 13 lines

Alternately I will need to figure out how to run the sparc on qemu here...

Thanks very much for all the testing though! :-D

Ira

Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

Still testing ppc images.

ppc image tests are passing with this patch.

Guenter

#24 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 62 lines · Ira Weiny
Quoted 61 lines · Guenter Roeck
Quoted 59 lines · Ira Weiny
Quoted 11 lines · Guenter Roeck
Quoted 10 lines · Ira Weiny
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 39 lines
Quoted 6 lines
Quoted 1 line

microblazeel works with this patch,

Awesome... Andrew in my rush yesterday I should have put a reported by on the patch for Guenter as well.

Sorry about that Guenter,

No worries.

Quoted 30 lines

Ira

Quoted 28 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Code path leading to that message is different but always the same from free_unref_page().

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

Quoted 7 lines
Quoted 1 line

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

That doesn't look like it is linux-next, which I guess means that something else in linux-next breaks it. What is your qemu version ?

Thanks,
Guenter

Quoted 38 lines

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Is there another test I need to run?

Ira

Quoted 17 lines

Guenter

Quoted 13 lines

Alternately I will need to figure out how to run the sparc on qemu here...

Thanks very much for all the testing though! :-D

Ira

Quoted 7 lines
Quoted 3 lines
Quoted 3 lines

Still testing ppc images.

ppc image tests are passing with this patch.

Guenter

author
#25 lore raw

RE: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

PiBPbiA1LzIxLzIwIDEwOjQyIEFNLCBJcmEgV2Vpbnkgd3JvdGU6DQo+ID4gT24gVGh1LCBNYXkg MjEsIDIwMjAgYXQgMDk6MDU6NDFBTSAtMDcwMCwgR3VlbnRlciBSb2VjayB3cm90ZToNCj4gPj4g T24gNS8xOS8yMCAxMDoxMyBQTSwgSXJhIFdlaW55IHdyb3RlOg0KPiA+Pj4gT24gVHVlLCBNYXkg MTksIDIwMjAgYXQgMTI6NDI6MTVQTSAtMDcwMCwgR3VlbnRlciBSb2VjayB3cm90ZToNCj4gPj4+ PiBPbiBUdWUsIE1heSAxOSwgMjAyMCBhdCAxMTo0MDozMkFNIC0wNzAwLCBJcmEgV2Vpbnkgd3Jv dGU6DQo+ID4+Pj4+IE9uIFR1ZSwgTWF5IDE5LCAyMDIwIGF0IDA5OjU0OjIyQU0gLTA3MDAsIEd1 ZW50ZXIgUm9lY2sgd3JvdGU6DQo+ID4+Pj4+PiBPbiBNb24sIE1heSAxOCwgMjAyMCBhdCAxMTo0 ODo0M0FNIC0wNzAwLCBpcmEud2VpbnlAaW50ZWwuY29tDQo+IHdyb3RlOg0KPiA+Pj4+Pj4+IEZy b206IElyYSBXZWlueSA8aXJhLndlaW55QGludGVsLmNvbT4NCj4gPj4+Pj4+Pg0KPiA+Pj4+Pj4+ IFRoZSBrdW5tYXBfYXRvbWljIGNsZWFuIHVwIGZhaWxlZCB0byByZW1vdmUgb25lIHNldCBvZg0K PiA+Pj4+Pj4+IHBhZ2VmYXVsdC9wcmVlbXB0IGVuYWJsZXMgd2hlbiB2YWRkciBpcyBub3QgaW4g dGhlIGZpeG1hcC4NCj4gPj4+Pj4+Pg0KPiA+Pj4+Pj4+IEZpeGVzOiBiZWUyMTI4YTA5ZTYgKCJh cmNoL2t1bm1hcF9hdG9taWM6IGNvbnNvbGlkYXRlIGR1cGxpY2F0ZQ0KPiA+Pj4+Pj4+IGNvZGUi KQ0KPiA+Pj4+Pj4+IFNpZ25lZC1vZmYtYnk6IElyYSBXZWlueSA8aXJhLndlaW55QGludGVsLmNv bT4NCj4gPj4+Pj4+DQo+ID4+Pj4+PiBtaWNyb2JsYXplZWwgd29ya3Mgd2l0aCB0aGlzIHBhdGNo LA0KPiA+Pj4+Pg0KPiA+Pj4+PiBBd2Vzb21lLi4uICBBbmRyZXcgaW4gbXkgcnVzaCB5ZXN0ZXJk YXkgSSBzaG91bGQgaGF2ZSBwdXQgYQ0KPiA+Pj4+PiByZXBvcnRlZCBieSBvbiB0aGUgcGF0Y2gg Zm9yIEd1ZW50ZXIgYXMgd2VsbC4NCj4gPj4+Pj4NCj4gPj4+Pj4gU29ycnkgYWJvdXQgdGhhdCBH dWVudGVyLA0KPiA+Pj4+DQo+ID4+Pj4gTm8gd29ycmllcy4NCj4gPj4+Pg0KPiA+Pj4+PiBJcmEN Cj4gPj4+Pj4NCj4gPj4+Pj4+IGFzIGRvIHRoZSBub3NtcCBzcGFyYzMyIGJvb3QgdGVzdHMsIGJ1 dCBzcGFyYzMyIGJvb3QgdGVzdHMgd2l0aA0KPiA+Pj4+Pj4gU01QIGVuYWJsZWQgc3RpbGwgZmFp bCB3aXRoIGxvdHMgb2YgbWVzc2FnZXMgc3VjaCBhczoNCj4gPj4+Pj4+DQo+ID4+Pj4+PiBCVUc6 IEJhZCBwYWdlIHN0YXRlIGluIHByb2Nlc3Mgc3dhcHBlci8wICBwZm46MDA2YTENCj4gPj4+Pj4+ IHBhZ2U6ZjA5MzM0MjAgcmVmY291bnQ6MCBtYXBjb3VudDoxIG1hcHBpbmc6KHB0cnZhbCkgaW5k ZXg6MHgxDQo+ID4+Pj4+PiBmbGFnczogMHgwKCkNCj4gPj4+Pj4+IHJhdzogMDAwMDAwMDAgMDAw MDAxMDAgMDAwMDAxMjIgMDAwMDAwMDAgMDAwMDAwMDEgMDAwMDAwMDANCj4gPj4+Pj4+IDAwMDAw MDAwIDAwMDAwMDAwIHBhZ2UgZHVtcGVkIGJlY2F1c2U6IG5vbnplcm8gbWFwY291bnQNCj4gTW9k dWxlcw0KPiA+Pj4+Pj4gbGlua2VkIGluOg0KPiA+Pj4+Pj4gQ1BVOiAwIFBJRDogMSBDb21tOiBz d2FwcGVyLzAgVGFpbnRlZDogRyAgICBCICAgICAgICAgICAgIDUuNy4wLXJjNi1uZXh0LQ0KPiAy MDIwMDUxOC0wMDAwMi1nYjE3OGQyZDU2ZjI5ICMxDQo+ID4+Pj4+PiBbZjAwZTdhYjggOg0KPiA+ Pj4+Pj4gYmFkX3BhZ2UrMHhhOC8weDEwOCBdDQo+ID4+Pj4+PiBbZjAwZThiNTQgOg0KPiA+Pj4+ Pj4gZnJlZV9wY3BwYWdlc19idWxrKzB4MTU0LzB4NTJjIF0NCj4gPj4+Pj4+IFtmMDBlYTAyNCA6 DQo+ID4+Pj4+PiBmcmVlX3VucmVmX3BhZ2UrMHg1NC8weDZjIF0NCj4gPj4+Pj4+IFtmMDBlZDg2 NCA6DQo+ID4+Pj4+PiBmcmVlX3Jlc2VydmVkX2FyZWErMHg1OC8weGVjIF0NCj4gPj4+Pj4+IFtm MDUyNzEwNCA6DQo+ID4+Pj4+PiBrZXJuZWxfaW5pdCsweDE0LzB4MTEwIF0NCj4gPj4+Pj4+IFtm MDAwYjc3YyA6DQo+ID4+Pj4+PiByZXRfZnJvbV9rZXJuZWxfdGhyZWFkKzB4Yy8weDM4IF0NCj4g Pj4+Pj4+IFswMDAwMDAwMCA6DQo+ID4+Pj4+PiAweDAgXQ0KPiA+Pj4+Pj4NCj4gPj4+Pj4+IENv ZGUgcGF0aCBsZWFkaW5nIHRvIHRoYXQgbWVzc2FnZSBpcyBkaWZmZXJlbnQgYnV0IGFsd2F5cyB0 aGUNCj4gPj4+Pj4+IHNhbWUgZnJvbSBmcmVlX3VucmVmX3BhZ2UoKS4NCj4gPj4+DQo+ID4+PiBB Y3R1YWxseSBpdCBvY2N1cnMgdG8gbWUgdGhhdCB0aGUgcGF0Y2ggY29uc29saWRhdGluZyBrbWFw X3Byb3QgaXMNCj4gPj4+IG9kZCBmb3Igc3BhcmMgMzIgYml0Li4uDQo+ID4+Pg0KPiA+Pj4gSXRz IGEgbG9uZyBzaG90IGJ1dCBjb3VsZCB5b3UgdHJ5IHJldmVydGluZyB0aGlzIHBhdGNoPw0KPiA+ Pj4NCj4gPj4+IDRlYTdkMjQxOWUzZiBrbWFwOiBjb25zb2xpZGF0ZSBrbWFwX3Byb3QgZGVmaW5p dGlvbnMNCj4gPj4+DQo+ID4+DQo+ID4+IFRoYXQgaXMgbm90IGVhc3kgdG8gcmV2ZXJ0LCB1bmZv cnR1bmF0ZWx5LCBkdWUgdG8gc2V2ZXJhbCBmb2xsb3ctdXANCj4gcGF0Y2hlcy4NCj4gPg0KPiA+ IEkgaGF2ZSBnb3R0ZW4geW91ciBzcGFyYyB0ZXN0cyB0byBydW4gYW5kIHRoZXkgYWxsIHBhc3Mu Li4NCj4gPg0KPiA+IDA4OjEwOjM0ID4gLi4vbGludXgtYnVpbGQtdGVzdC9yb290ZnMvc3BhcmMv cnVuLXFlbXUtc3BhcmMuc2gNCj4gPiBCdWlsZCByZWZlcmVuY2U6IHY1LjctcmM0LTE3LWc4NTJi NmYyZWRjMGYNCj4gPg0KPiANCj4gVGhhdCBkb2Vzbid0IGxvb2sgbGlrZSBpdCBpcyBsaW51eC1u ZXh0LCB3aGljaCBJIGd1ZXNzIG1lYW5zIHRoYXQgc29tZXRoaW5nDQo+IGVsc2UgaW4gbGludXgt bmV4dCBicmVha3MgaXQuIFdoYXQgaXMgeW91ciBxZW11IHZlcnNpb24gPw0KDQpBaCB5ZWEgdGhh dCB3YXMganVzdCA1LjctcmM0IHdpdGggbXkgcGF0Y2ggc2V0IGFwcGxpZWQuICBZZXMgbXVzdCBi ZSBzb21ldGhpbmcgZWxzZSBvciBhbiBpbnRlcmFjdGlvbiB3aXRoIG15IHBhdGNoIHNldC4NCg0K RGlkIEkgc2VlIGFub3RoZXIgZW1haWwgd2l0aCBNaWtlIHdoaWNoIG1heSBmaXggdGhpcz8NCg0K SXJhDQoNCj4gDQo+IFRoYW5rcywNCj4gR3VlbnRlcg0KPiANCj4gPiBCdWlsZGluZyBzcGFyYzMy OlNQQVJDQ2xhc3NpYzpub3NtcDpzY3NpOmhkIC4uLiBydW5uaW5nIC4uLi4uLi4uLiBwYXNzZWQN Cj4gPiBCdWlsZGluZyBzcGFyYzMyOlNQQVJDYm9vazpub3NtcDpzY3NpOmNkIC4uLiBydW5uaW5n IC4uLi4uLi4uLiBwYXNzZWQNCj4gPiBCdWlsZGluZyBzcGFyYzMyOkxYOm5vc21wOm5vYXBjOnNj c2k6aGQgLi4uIHJ1bm5pbmcgLi4uLi4uLi4uIHBhc3NlZA0KPiA+IEJ1aWxkaW5nIHNwYXJjMzI6 U1MtNDpub3NtcDppbml0cmQgLi4uIHJ1bm5pbmcgLi4uLi4uLi4uIHBhc3NlZA0KPiA+IEJ1aWxk aW5nIHNwYXJjMzI6U1MtNTpub3NtcDpzY3NpOmhkIC4uLiBydW5uaW5nIC4uLi4uLi4uLiBwYXNz ZWQNCj4gPiBCdWlsZGluZyBzcGFyYzMyOlNTLTEwOm5vc21wOnNjc2k6Y2QgLi4uIHJ1bm5pbmcg Li4uLi4uLi4uIHBhc3NlZA0KPiA+IEJ1aWxkaW5nIHNwYXJjMzI6U1MtMjA6bm9zbXA6c2NzaTpo ZCAuLi4gcnVubmluZyAuLi4uLi4uLi4gcGFzc2VkDQo+ID4gQnVpbGRpbmcgc3BhcmMzMjpTUy02 MDBNUDpub3NtcDpzY3NpOmhkIC4uLiBydW5uaW5nIC4uLi4uLi4uLiBwYXNzZWQNCj4gPiBCdWls ZGluZyBzcGFyYzMyOlZveWFnZXI6bm9zbXA6bm9hcGM6c2NzaTpoZCAuLi4gcnVubmluZyAuLi4u Li4uLi4gcGFzc2VkDQo+ID4gQnVpbGRpbmcgc3BhcmMzMjpTUy00OnNtcDpzY3NpOmhkIC4uLiBy dW5uaW5nIC4uLi4uLi4uLiBwYXNzZWQNCj4gPiBCdWlsZGluZyBzcGFyYzMyOlNTLTU6c21wOnNj c2k6Y2QgLi4uIHJ1bm5pbmcgLi4uLi4uLi4uIHBhc3NlZA0KPiA+IEJ1aWxkaW5nIHNwYXJjMzI6 U1MtMTA6c21wOnNjc2k6aGQgLi4uIHJ1bm5pbmcgLi4uLi4uLi4uIHBhc3NlZA0KPiA+IEJ1aWxk aW5nIHNwYXJjMzI6U1MtMjA6c21wOnNjc2k6aGQgLi4uIHJ1bm5pbmcgLi4uLi4uLi4uIHBhc3Nl ZA0KPiA+IEJ1aWxkaW5nIHNwYXJjMzI6U1MtNjAwTVA6c21wOnNjc2k6aGQgLi4uIHJ1bm5pbmcg Li4uLi4uLi4uIHBhc3NlZA0KPiA+IEJ1aWxkaW5nIHNwYXJjMzI6Vm95YWdlcjpzbXA6bm9hcGM6 c2NzaTpoZCAuLi4gcnVubmluZyAuLi4uLi4uLi4gcGFzc2VkDQo+ID4NCj4gPiBJcyB0aGVyZSBh bm90aGVyIHRlc3QgSSBuZWVkIHRvIHJ1bj8NCj4gPg0KPiA+IElyYQ0KPiA+DQo+ID4NCj4gPj4N Cj4gPj4gR3VlbnRlcg0KPiA+Pg0KPiA+Pj4gQWx0ZXJuYXRlbHkgSSB3aWxsIG5lZWQgdG8gZmln dXJlIG91dCBob3cgdG8gcnVuIHRoZSBzcGFyYyBvbiBxZW11IGhlcmUuLi4NCj4gPj4+DQo+ID4+ PiBUaGFua3MgdmVyeSBtdWNoIGZvciBhbGwgdGhlIHRlc3RpbmcgdGhvdWdoISAgOi1EDQo+ID4+ Pg0KPiA+Pj4gSXJhDQo+ID4+Pg0KPiA+Pj4+Pj4NCj4gPj4+Pj4+IFN0aWxsIHRlc3RpbmcgcHBj IGltYWdlcy4NCj4gPj4+Pj4+DQo+ID4+Pj4NCj4gPj4+PiBwcGMgaW1hZ2UgdGVzdHMgYXJlIHBh c3Npbmcgd2l0aCB0aGlzIHBhdGNoLg0KPiA+Pj4+DQo+ID4+Pj4gR3VlbnRlcg0KPiA+Pg0KDQo

maintainer
#26 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Ira Weiny
Quoted 32 lines · On Thu, 21 May 2020 10:42:50 -0700 Ira Weiny <[email protected]> wrote:
Quoted 10 lines
Quoted 8 lines

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Quoted 1 line

Is there another test I need to run?

This all petered out, but as I understand it, this patchset still might have issues on various architectures.

Can folks please provide an update on the testing status?

author
#27 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 34 lines · Andrew Morton
Quoted 32 lines · On Thu, 21 May 2020 10:42:50 -0700 Ira Weiny <[email protected]> wrote:
Quoted 10 lines
Quoted 8 lines

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Quoted 6 lines
Quoted 1 line

Is there another test I need to run?

This all petered out, but as I understand it, this patchset still might have issues on various architectures.

Can folks please provide an update on the testing status?

I believe the tests were failing for Guenter due to another patch set...[1]

My tests with just this series are working.

From my understanding the other failures were unrelated.[2]

<quote Mike Rapoport>
I've checked the patch above on top of the mmots which already has Ira's patches and it booted fine. I've used sparc32_defconfig to build the kernel and qemu-system-sparc with default machine and CPU. </quote>

Mike, am I wrong? Do you think the kmap() patches are still causing issues?

Ira

[1] https://lore.kernel.org/lkml/2807E5FD2F6FDA4886F6618EAC48510E92EAB1DE@CRSMSX101.amr.corp.intel.com/
[2] https://lore.kernel.org/lkml/[email protected]/

#28 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 48 lines · Ira Weiny
Quoted 34 lines · Andrew Morton
Quoted 32 lines · On Thu, 21 May 2020 10:42:50 -0700 Ira Weiny <[email protected]> wrote:
Quoted 10 lines
Quoted 8 lines

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Quoted 6 lines
Quoted 1 line

Is there another test I need to run?

This all petered out, but as I understand it, this patchset still might have issues on various architectures.

Can folks please provide an update on the testing status?

I believe the tests were failing for Guenter due to another patch set...[1]

My tests with just this series are working.

Quoted 1 line

From my understanding the other failures were unrelated.[2]

Quoted 8 lines

<quote Mike Rapoport>
I've checked the patch above on top of the mmots which already has Ira's patches and it booted fine. I've used sparc32_defconfig to build the kernel and qemu-system-sparc with default machine and CPU. </quote>

Mike, am I wrong? Do you think the kmap() patches are still causing issues?

For my part, all I can say is that -next is in pretty bad shape right now. The summary of my tests says:

Build results:

	total: 151 pass: 130 fail: 21
Qemu test results:
	total: 430 pass: 375 fail: 55

sparc32 smp images in next-20200603 still crash for me with a spinlock recursion. s390 images hang early in boot. Several others (alpha, arm64, various ppc) don't even compile. I can run some more bisects over time, but this is becoming a full-time job :-(.

Guenter

reviewer
#29 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 49 lines · Guenter Roeck
Quoted 48 lines · Ira Weiny
Quoted 34 lines · Andrew Morton
Quoted 32 lines · On Thu, 21 May 2020 10:42:50 -0700 Ira Weiny <[email protected]> wrote:
Quoted 10 lines
Quoted 8 lines

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Quoted 6 lines
Quoted 1 line

Is there another test I need to run?

This all petered out, but as I understand it, this patchset still might have issues on various architectures.

Can folks please provide an update on the testing status?

I believe the tests were failing for Guenter due to another patch set...[1]

My tests with just this series are working.

Quoted 1 line

From my understanding the other failures were unrelated.[2]

Quoted 7 lines
Quoted 7 lines

<quote Mike Rapoport>
I've checked the patch above on top of the mmots which already has Ira's patches and it booted fine. I've used sparc32_defconfig to build the kernel and qemu-system-sparc with default machine and CPU. </quote>

Mike, am I wrong? Do you think the kmap() patches are still causing issues?

sparc32 UP and microblaze work for me with next-20200603, but I didn't test other architectures.

Quoted 10 lines

For my part, all I can say is that -next is in pretty bad shape right now. The summary of my tests says:

Build results:

	total: 151 pass: 130 fail: 21
Qemu test results:
	total: 430 pass: 375 fail: 55

sparc32 smp images in next-20200603 still crash for me with a spinlock recursion.

I think this is because Will's fixes [1] are not yet in -next.

Quoted 5 lines

s390 images hang early in boot. Several others (alpha, arm64, various ppc) don't even compile. I can run some more bisects over time, but this is becoming a full-time job :-(.

Guenter

[1] https://lore.kernel.org/lkml/[email protected]

Signature · 2 lines
Sincerely yours,
Mike.
author
#30 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 74 lines · Mike Rapoport
Quoted 49 lines · Guenter Roeck
Quoted 48 lines · Ira Weiny
Quoted 34 lines · Andrew Morton
Quoted 32 lines · On Thu, 21 May 2020 10:42:50 -0700 Ira Weiny <[email protected]> wrote:
Quoted 10 lines
Quoted 8 lines

Actually it occurs to me that the patch consolidating kmap_prot is odd for sparc 32 bit...

Its a long shot but could you try reverting this patch?

4ea7d2419e3f kmap: consolidate kmap_prot definitions

That is not easy to revert, unfortunately, due to several follow-up patches.

I have gotten your sparc tests to run and they all pass...

08:10:34 > ../linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-rc4-17-g852b6f2edc0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Quoted 6 lines
Quoted 1 line

Is there another test I need to run?

This all petered out, but as I understand it, this patchset still might have issues on various architectures.

Can folks please provide an update on the testing status?

I believe the tests were failing for Guenter due to another patch set...[1]

My tests with just this series are working.

Quoted 1 line

From my understanding the other failures were unrelated.[2]

Quoted 7 lines
Quoted 7 lines

<quote Mike Rapoport>
I've checked the patch above on top of the mmots which already has Ira's patches and it booted fine. I've used sparc32_defconfig to build the kernel and qemu-system-sparc with default machine and CPU. </quote>

Mike, am I wrong? Do you think the kmap() patches are still causing issues?

sparc32 UP and microblaze work for me with next-20200603, but I didn't test other architectures.

Quoted 10 lines

For my part, all I can say is that -next is in pretty bad shape right now. The summary of my tests says:

Build results:

	total: 151 pass: 130 fail: 21
Qemu test results:
	total: 430 pass: 375 fail: 55

sparc32 smp images in next-20200603 still crash for me with a spinlock recursion.

I think this is because Will's fixes [1] are not yet in -next.

Quoted 7 lines
Quoted 5 lines

s390 images hang early in boot. Several others (alpha, arm64, various ppc) don't even compile. I can run some more bisects over time, but this is becoming a full-time job :-(.

Guenter

[1] https://lore.kernel.org/lkml/[email protected]

I abandoned the bisect and tested with this fix.[1] It passes. Guenter, on the original thread we had microblaze and ppc working with my fix.

https://lore.kernel.org/lkml/[email protected]/

Sounds like the current failures above are from something much newer in the tree.

Ira

[1]
23:26:24 > /home/iweiny/dev/linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: next-20200603-3-gf5afe92a2135

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

Quoted 3 lines
Signature · 2 lines
Sincerely yours,
Mike.
author
#31 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Guenter Roeck
Quoted 4 lines · Guenter Roeck
Quoted 3 lines · Ira Weiny
Quoted 2 lines · Andrew Morton

On Thu, 21 May 2020 10:42:50 -0700 Ira Weiny <[email protected]> wrote:

...

Quoted 25 lines
Quoted 12 lines
Quoted 5 lines

This all petered out, but as I understand it, this patchset still might have issues on various architectures.

Can folks please provide an update on the testing status?

I believe the tests were failing for Guenter due to another patch set...[1]

My tests with just this series are working.

Quoted 1 line

From my understanding the other failures were unrelated.[2]

Quoted 8 lines

<quote Mike Rapoport>
I've checked the patch above on top of the mmots which already has Ira's patches and it booted fine. I've used sparc32_defconfig to build the kernel and qemu-system-sparc with default machine and CPU. </quote>

Mike, am I wrong? Do you think the kmap() patches are still causing issues?

For my part, all I can say is that -next is in pretty bad shape right now. The summary of my tests says:

Build results:

Quoted 9 lines
	total: 151 pass: 130 fail: 21
Qemu test results:
	total: 430 pass: 375 fail: 55

sparc32 smp images in next-20200603 still crash for me with a spinlock recursion. s390 images hang early in boot. Several others (alpha, arm64, various ppc) don't even compile. I can run some more bisects over time, but this is becoming a full-time job :-(.

I'm not sure what the process here is. I just applied my series[1] on Linus' Master branch[2] and ran sparc32 and s290 from your tests.

sparc32: (passes)

21:43:49 > /home/iweiny/dev/linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-7188-g67a7a97e8a0f

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running ......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running ......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:nosmp:initrd ... running ......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running ......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ...... .... passed Building sparc32:SS-4:smp:scsi:hd ... running ......... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

s390: (does not compile)

<stdin>:1511:2: warning: #warning syscall clone3 not implemented [-Wcpp] In file included from ./arch/sparc/include/asm/bug.h:6:0,

                 from ./include/linux/bug.h:5,
                 from ./include/linux/mmdebug.h:5,
                 from ./include/linux/mm.h:9,
                 from mm/huge_memory.c:8:
mm/huge_memory.c: In function 'hugepage_init':
./include/linux/compiler.h:403:38: error: call to '__compiletime_assert_127' declared with attribute error: BUILD_BUG_ON failed: ((13 + (13-3))-13) >= 9
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
                                      ^
./include/linux/compiler.h:384:4: note: in definition of macro '__compiletime_assert'
    prefix ## suffix();    \
    ^~~~~~

./include/linux/compiler.h:403:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'

 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^~~~~~~~~~~~~~~~~~

./include/linux/build_bug.h:50:2: note: in expansion of macro 'BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^~~~~~~~~~~~~~~~
./include/linux/bug.h:24:4: note: in expansion of macro 'BUILD_BUG_ON'

    BUILD_BUG_ON(cond);             \
    ^~~~~~~~~~~~

mm/huge_memory.c:403:2: note: in expansion of macro 'MAYBE_BUILD_BUG_ON'
MAYBE_BUILD_BUG_ON(HPAGE_PMD_ORDER >= MAX_ORDER); ^~~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:267: mm/huge_memory.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1735: mm] Error 2
make: *** Waiting for unfinished jobs....
------------

The s390 error is the same on Linus' master and linux-next. So whatever is causing that has slipped into mainline and/or is something I've broken in the test scripts.

With linux-next on sparc I too see the spinlock issue; something like:

...
Starting syslogd: BUG: spinlock recursion on CPU#0, S01syslogd/139
lock: 0xf53ef350, .magic: dead4ead, .owner: S01syslogd/139, .owner_cpu: 0

CPU: 0 PID: 139 Comm: S01syslogd Not tainted 5.7.0-next-20200603 #1

[f0067d00 :
do_raw_spin_lock+0xa8/0xd8 ]
[f00d598c :
copy_page_range+0x328/0x804 ]
[f0025c34 :
dup_mm+0x334/0x434 ]
[f0027198 :
copy_process+0x1248/0x12d4 ]
[f00273b8 :
_do_fork+0x54/0x30c ]
[f00276e4 :
do_fork+0x5c/0x6c ]
[f000de44 :
sparc_do_fork+0x18/0x38 ]
[f000b7f4 :
do_syscall+0x34/0x40 ]
[5010cd4c :
0x5010cd4c ]

qemu-system-sparc: terminating on signal 15 from pid 2000056 (/bin/bash)
...

FWIW I don't see any of this being an issue with the kmap() code but I agree things could be cleaner. How can we back linux-next off a bit? I'm not an expert here with how linux-next works.

For example I just picked the latest patch from me within the linux-next tree:

2e483306d5a8 arch/{mips,sparc,microblaze,powerpc}: don't enable pagefault/preempt twice

And built from there it looks good for sparc.

23:01:31 > /home/iweiny/dev/linux-build-test/rootfs/sparc/run-qemu-sparc.sh Build reference: v5.7-719-g2e483306d5a8

Building sparc32:SPARCClassic:nosmp:scsi:hd ... running .......... passed Building sparc32:SPARCbook:nosmp:scsi:cd ... running .......... passed Building sparc32:LX:nosmp:noapc:scsi:hd ... running .......... passed Building sparc32:SS-4:nosmp:initrd ... running .......... passed Building sparc32:SS-5:nosmp:scsi:hd ... running .......... passed Building sparc32:SS-10:nosmp:scsi:cd ... running .......... passed Building sparc32:SS-20:nosmp:scsi:hd ... running .......... passed Building sparc32:SS-600MP:nosmp:scsi:hd ... running ......... passed Building sparc32:Voyager:nosmp:noapc:scsi:hd ... running ......... passed Building sparc32:SS-4:smp:scsi:hd ... running ......^[[1;2D... passed Building sparc32:SS-5:smp:scsi:cd ... running ......... passed Building sparc32:SS-10:smp:scsi:hd ... running ......... passed Building sparc32:SS-20:smp:scsi:hd ... running ......... passed Building sparc32:SS-600MP:smp:scsi:hd ... running ......... passed Building sparc32:Voyager:smp:noapc:scsi:hd ... running ......... passed

I'm going to bisect between there and HEAD.

Ira

[1]

67a7a97e8a0f arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice 4a3dd9ec36d8 kmap: Consolidate kmap_prot definitions
a3b39b1668ac sparc: Remove unnecessary includes
452195c6e8a8 parisc/kmap: Remove duplicate kmap code
317e4af1da94 kmap: Remove kmap_atomic_to_page()
e11e52415a4d drm: Remove drm specific kmap_atomic code
afd4911f0cfb arch/kmap: Define kmap_atomic_prot() for all arch's 2a5524d63341 arch/kmap: Don't hard code kmap_prot values
c94bbaab0296 arch/kmap: Ensure kmap_prot visibility
6f29a6b66d3b arch/kunmap_atomic: Consolidate duplicate code
0c7122ef07d1 arch/kmap_atomic: Consolidate duplicate code
63b8bbf47723 {x86,powerpc,microblaze}/kmap: Move preempt disable 23b3175de76f arch/kunmap: Remove duplicate kunmap implementations 9514dd54fda8 arch/kmap: Remove redundant arch specific kmaps
e92e53c0080b arch/xtensa: Move kmap build bug out of the way
cab1afa4f6ac arch/kmap: Remove BUG_ON()

[2] cb8e59cc8720 (linus/master, linus-master) Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

reviewer
#32 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 28 lines · Ira Weiny

On Wed, Jun 03, 2020 at 04:44:17PM -0700, Guenter Roeck wrote:

With linux-next on sparc I too see the spinlock issue; something like:

...
Starting syslogd: BUG: spinlock recursion on CPU#0, S01syslogd/139
lock: 0xf53ef350, .magic: dead4ead, .owner: S01syslogd/139, .owner_cpu: 0

CPU: 0 PID: 139 Comm: S01syslogd Not tainted 5.7.0-next-20200603 #1

[f0067d00 :
do_raw_spin_lock+0xa8/0xd8 ]
[f00d598c :
copy_page_range+0x328/0x804 ]
[f0025c34 :
dup_mm+0x334/0x434 ]
[f0027198 :
copy_process+0x1248/0x12d4 ]
[f00273b8 :
_do_fork+0x54/0x30c ]
[f00276e4 :
do_fork+0x5c/0x6c ]
[f000de44 :
sparc_do_fork+0x18/0x38 ]
[f000b7f4 :
do_syscall+0x34/0x40 ]
[5010cd4c :
0x5010cd4c ]

Quoted 1 line

I'm going to bisect between there and HEAD.

The sparc issue should be fixed by

https://lore.kernel.org/lkml/[email protected]

Quoted 1 line

Ira

Signature · 2 lines
Sincerely yours,
Mike.
author
#33 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 29 lines · Mike Rapoport
Quoted 28 lines · Ira Weiny

On Wed, Jun 03, 2020 at 04:44:17PM -0700, Guenter Roeck wrote:

With linux-next on sparc I too see the spinlock issue; something like:

...
Starting syslogd: BUG: spinlock recursion on CPU#0, S01syslogd/139
lock: 0xf53ef350, .magic: dead4ead, .owner: S01syslogd/139, .owner_cpu: 0

CPU: 0 PID: 139 Comm: S01syslogd Not tainted 5.7.0-next-20200603 #1

[f0067d00 :
do_raw_spin_lock+0xa8/0xd8 ]
[f00d598c :
copy_page_range+0x328/0x804 ]
[f0025c34 :
dup_mm+0x334/0x434 ]
[f0027198 :
copy_process+0x1248/0x12d4 ]
[f00273b8 :
_do_fork+0x54/0x30c ]
[f00276e4 :
do_fork+0x5c/0x6c ]
[f000de44 :
sparc_do_fork+0x18/0x38 ]
[f000b7f4 :
do_syscall+0x34/0x40 ]
[5010cd4c :
0x5010cd4c ]

Quoted 5 lines
Quoted 1 line

I'm going to bisect between there and HEAD.

The sparc issue should be fixed by

https://lore.kernel.org/lkml/[email protected]

Saw your other email. And yes they are!

Thanks!
Ira

Quoted 6 lines
Quoted 2 lines

Ira

Signature · 2 lines
Sincerely yours,
Mike.
#34 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Ira Weiny

On 6/3/20 11:22 PM, Ira Weiny wrote:
[ ... ]

Quoted 38 lines

s390: (does not compile)

<stdin>:1511:2: warning: #warning syscall clone3 not implemented [-Wcpp] In file included from ./arch/sparc/include/asm/bug.h:6:0,

                 from ./include/linux/bug.h:5,
                 from ./include/linux/mmdebug.h:5,
                 from ./include/linux/mm.h:9,
                 from mm/huge_memory.c:8:
mm/huge_memory.c: In function 'hugepage_init':
./include/linux/compiler.h:403:38: error: call to '__compiletime_assert_127' declared with attribute error: BUILD_BUG_ON failed: ((13 + (13-3))-13) >= 9
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
                                      ^
./include/linux/compiler.h:384:4: note: in definition of macro '__compiletime_assert'
    prefix ## suffix();    \
    ^~~~~~

./include/linux/compiler.h:403:2: note: in expansion of macro '_compiletime_assert'
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro 'compiletime_assert'

 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^~~~~~~~~~~~~~~~~~

./include/linux/build_bug.h:50:2: note: in expansion of macro 'BUILD_BUG_ON_MSG'
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^~~~~~~~~~~~~~~~
./include/linux/bug.h:24:4: note: in expansion of macro 'BUILD_BUG_ON'

    BUILD_BUG_ON(cond);             \
    ^~~~~~~~~~~~

mm/huge_memory.c:403:2: note: in expansion of macro 'MAYBE_BUILD_BUG_ON'
MAYBE_BUILD_BUG_ON(HPAGE_PMD_ORDER >= MAX_ORDER); ^~~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:267: mm/huge_memory.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1735: mm] Error 2
make: *** Waiting for unfinished jobs....
------------

Quoted 4 lines

The s390 error is the same on Linus' master and linux-next. So whatever is causing that has slipped into mainline and/or is something I've broken in the test scripts.

Compiler version related. gcc version 8.x and later no longer work. Bisect points to commit a148866489f ("sched: Replace rq::wake_list"). Oddly enough x86 images are broken as well. You'll have to use an older version of gcc (or presumably clang) until this is fixed.

Guenter

reviewer
#35 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Guenter Roeck
Quoted 5 lines · Guenter Roeck

sparc32 smp images in next-20200603 still crash for me with a spinlock recursion. s390 images hang early in boot. Several others (alpha, arm64, various ppc) don't even compile. I can run some more bisects over time, but this is becoming a full-time job :-(.

I've been able to bisect s390 hang to commit b614345f52bc ("x86/entry:
Clarify irq_{enter,exit}_rcu()").

After this commit, lockdep_hardirq_exit() is called twice on s390 (and others) - one time in irq_exit_rcu() and another one in irq_exit():

/**
* irq_exit_rcu() - Exit an interrupt context without updating RCU *
* Also processes softirqs if needed and possible.
*/
void irq_exit_rcu(void)

{
	__irq_exit_rcu();
	 /* must be last! */
	lockdep_hardirq_exit();
}

/**
* irq_exit - Exit an interrupt context, update RCU and lockdep *
* Also processes softirqs if needed and possible.
*/
void irq_exit(void)

{
	irq_exit_rcu();
	rcu_irq_exit();
	 /* must be last! */
	lockdep_hardirq_exit();
}

Removing the call in irq_exit() make s390 boot again, and judgung by the x86 entry code, the comment /* must be last! */ is stale...

@Peter, @Thomas, can you comment please?

From e51d50ee6f4d1f446decf91c2c67230da14ff82c Mon Sep 17 00:00:00 2001
From: Mike Rapoport <[email protected]>
Date: Thu, 4 Jun 2020 12:37:03 +0300
Subject: [PATCH] softirq: don't call lockdep_hardirq_exit() twice

After commit b614345f52bc ("x86/entry: Clarify irq_{enter,exit}_rcu()") lockdep_hardirq_exit() is called twice on every architecture that uses irq_exit(): one time in irq_exit_rcu() and another one in irq_exit().

Remove the extra call in irq_exit().

---
 kernel/softirq.c | 3 ---
 1 file changed, 3 deletions(-)
kernel/softirq.c +0 -3
index a3eb6eba8c41..7523f4ce4c1d 100644
@@ -427,7 +427,6 @@ static inline void __irq_exit_rcu(void)
 void irq_exit_rcu(void)
 {
 	__irq_exit_rcu();
-	 /* must be last! */
 	lockdep_hardirq_exit();
 }
 
@@ -440,8 +439,6 @@ void irq_exit(void)
 {
 	irq_exit_rcu();
 	rcu_irq_exit();
-	 /* must be last! */
-	lockdep_hardirq_exit();
 }
 
 /*
Signature · 1 line
2.26.2
Quoted 1 line

Guenter

Signature · 2 lines
Sincerely yours,
Mike.
author
#36 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 38 lines · Mike Rapoport
Quoted 5 lines · Guenter Roeck

sparc32 smp images in next-20200603 still crash for me with a spinlock recursion. s390 images hang early in boot. Several others (alpha, arm64, various ppc) don't even compile. I can run some more bisects over time, but this is becoming a full-time job :-(.

I've been able to bisect s390 hang to commit b614345f52bc ("x86/entry:
Clarify irq_{enter,exit}_rcu()").

After this commit, lockdep_hardirq_exit() is called twice on s390 (and others) - one time in irq_exit_rcu() and another one in irq_exit():

/**
* irq_exit_rcu() - Exit an interrupt context without updating RCU *
* Also processes softirqs if needed and possible.
*/
void irq_exit_rcu(void)

{
	__irq_exit_rcu();
	 /* must be last! */
	lockdep_hardirq_exit();
}

/**
* irq_exit - Exit an interrupt context, update RCU and lockdep *
* Also processes softirqs if needed and possible.
*/
void irq_exit(void)

{
	irq_exit_rcu();
	rcu_irq_exit();
	 /* must be last! */
	lockdep_hardirq_exit();
}
Quoted 2 lines

Removing the call in irq_exit() make s390 boot again, and judgung by the x86 entry code, the comment /* must be last! */ is stale...

FWIW I got s390 to compile and this patch fixes s390 booting for me as well.

13:05:25 > /home/iweiny/dev/linux-build-test/rootfs/s390/run-qemu-s390.sh Build reference: next-20200603-4-g840714292d8c

Building s390:defconfig:initrd ... running ........... passed Building s390:defconfig:virtio-blk-ccw:rootfs ... running ........... passed Building s390:defconfig:scsi[virtio-ccw]:rootfs ... running .............. passed Building s390:defconfig:virtio-pci:rootfs ... running ........... passed Building s390:defconfig:scsi[virtio-pci]:rootfs ... running ........... passed

Ira

Quoted 50 lines

@Peter, @Thomas, can you comment please?

From e51d50ee6f4d1f446decf91c2c67230da14ff82c Mon Sep 17 00:00:00 2001
From: Mike Rapoport <[email protected]>
Date: Thu, 4 Jun 2020 12:37:03 +0300
Subject: [PATCH] softirq: don't call lockdep_hardirq_exit() twice

After commit b614345f52bc ("x86/entry: Clarify irq_{enter,exit}_rcu()") lockdep_hardirq_exit() is called twice on every architecture that uses irq_exit(): one time in irq_exit_rcu() and another one in irq_exit().

Remove the extra call in irq_exit().

---
 kernel/softirq.c | 3 ---
 1 file changed, 3 deletions(-)
kernel/softirq.c +0 -3
index a3eb6eba8c41..7523f4ce4c1d 100644
@@ -427,7 +427,6 @@ static inline void __irq_exit_rcu(void)
 void irq_exit_rcu(void)
 {
 	__irq_exit_rcu();
-	 /* must be last! */
 	lockdep_hardirq_exit();
 }
 
@@ -440,8 +439,6 @@ void irq_exit(void)
 {
 	irq_exit_rcu();
 	rcu_irq_exit();
-	 /* must be last! */
-	lockdep_hardirq_exit();
 }
 
 /*
Signature · 1 line
2.26.2
Quoted 1 line

Guenter

Signature · 2 lines
Sincerely yours,
Mike.
author
#37 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Guenter Roeck
Quoted 27 lines · Guenter Roeck
Quoted 27 lines · Guenter Roeck
Quoted 26 lines

as do the nosmp sparc32 boot tests,
but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BUG: Bad page state in process swapper/0  pfn:006a1
page:f0933420 refcount:0 mapcount:1 mapping:(ptrval) index:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 00000000 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B             5.7.0-rc6-next-20200518-00002-gb178d2d56f29 #1

[f00e7ab8 :
bad_page+0xa8/0x108 ]
[f00e8b54 :
free_pcppages_bulk+0x154/0x52c ]
[f00ea024 :
free_unref_page+0x54/0x6c ]
[f00ed864 :
free_reserved_area+0x58/0xec ]
[f0527104 :
kernel_init+0x14/0x110 ]
[f000b77c :
ret_from_kernel_thread+0xc/0x38 ]
[00000000 :
0x0 ]

Quoted 7 lines
Quoted 5 lines
Quoted 5 lines

Code path leading to that message is different but always the same from free_unref_page().

Still testing ppc images.

ppc image tests are passing with this patch.

How about sparc? I finally got your scripts to run on sparc and everything looks to be passing?

Are we all good now?

Thanks again!
Ira

#38 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

In reply to Guenter Roeck
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Quoted 6 lines
Quoted 2 lines
Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")

microblazeel works with this patch, as do the nosmp sparc32 boot tests, but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BTW, what's your setup for sparc32 boot tests? IOW, how do you manage to shrink the damn thing enough to have the loader cope with it? I hadn't been able to do that for the current mainline ;-/

#39 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 10 lines · Al Viro
Quoted 9 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")
Quoted 8 lines
Quoted 3 lines

microblazeel works with this patch, as do the nosmp sparc32 boot tests, but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BTW, what's your setup for sparc32 boot tests? IOW, how do you manage to shrink the damn thing enough to have the loader cope with it? I hadn't been able to do that for the current mainline ;-/

defconfig seems to work just fine, even after enabling various debug and file system options.

Guenter

#40 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 15 lines · Guenter Roeck
Quoted 14 lines · Al Viro
Quoted 12 lines · Guenter Roeck
Quoted 7 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")

microblazeel works with this patch, as do the nosmp sparc32 boot tests, but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

Quoted 7 lines
Quoted 4 lines

BTW, what's your setup for sparc32 boot tests? IOW, how do you manage to shrink the damn thing enough to have the loader cope with it? I hadn't been able to do that for the current mainline ;-/

defconfig seems to work just fine, even after enabling various debug and file system options.

The hell? How do you manage to get the kernel in? sparc32_defconfig ends up with 5316876 bytes unpacked...

#41 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 21 lines · Al Viro
Quoted 20 lines · Guenter Roeck
Quoted 18 lines · Al Viro
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Quoted 6 lines
Quoted 2 lines
Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")

microblazeel works with this patch, as do the nosmp sparc32 boot tests, but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BTW, what's your setup for sparc32 boot tests? IOW, how do you manage to shrink the damn thing enough to have the loader cope with it? I hadn't been able to do that for the current mainline ;-/

Quoted 5 lines
Quoted 2 lines

defconfig seems to work just fine, even after enabling various debug and file system options.

The hell? How do you manage to get the kernel in? sparc32_defconfig ends up with 5316876 bytes unpacked...

Incidentally, trying to load it via -kernel/-initrd leads to
Configuration device id QEMU version 1 machine id 64
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 15 offset 0
Invalid FCode start byte
CPUs: 1 x TI,TMS390Z55
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Dec 27 2018 19:17
Type 'help' for detailed information
[sparc] Kernel already loaded
switching to new context:
PROMLIB: obio_ranges 1
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 5.7.0-rc1-00002-gcf51e129b968 (al@duke) (gcc version 6.3.0 20170516 (Debian 6.3.0-18), GNU ld (GNU Binutils for Debian) 2.28) #32 Thu May 21 18:36:07 EDT 2020
printk: bootconsole [earlyprom0] enabled
ARCH: SUN4M
TYPE: Sun4m SparcStation10/20
Ethernet address: 52:54:00:12:34:56
303MB HIGHMEM available.
OF stdout device is: /obio/zs@0,100000:a
PROM: Built device tree with 30051 bytes of memory.
Booting Linux...
Power off control detected.

Kernel panic - not syncing: Failed to allocate memory for percpu areas.
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-rc1-00002-gcf51e129b968 #32

[f04f92a8 :
setup_per_cpu_areas+0x58/0x90 ]
[f04edbf4 :
start_kernel+0xc0/0x4a0 ]
[f04ed43c :
continue_boot+0x324/0x334 ]
[00000000 :
0x0 ]

Press Stop-A (L1-A) from sun keyboard or send break twice on console to return to the boot prom

---[ end Kernel panic - not syncing: Failed to allocate memory for percpu areas. ]---

Giving guest more RAM doesn't change the outcome (well, the number HIGHMEM line is obviously higher, but that's it).

So which sparc32 kernel have you booted with defconfig and how have you done that?

#42 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 67 lines · Al Viro
Quoted 21 lines · Al Viro
Quoted 20 lines · Guenter Roeck
Quoted 18 lines · Al Viro
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · On Mon, May 18, 2020 at 11:48:43AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

The kunmap_atomic clean up failed to remove one set of pagefault/preempt enables when vaddr is not in the fixmap.

Quoted 6 lines
Quoted 2 lines
Fixes bee2128a09e6 ("arch/kunmap_atomic: consolidate duplicate code")

microblazeel works with this patch, as do the nosmp sparc32 boot tests, but sparc32 boot tests with SMP enabled still fail with lots of messages such as:

BTW, what's your setup for sparc32 boot tests? IOW, how do you manage to shrink the damn thing enough to have the loader cope with it? I hadn't been able to do that for the current mainline ;-/

Quoted 5 lines
Quoted 2 lines

defconfig seems to work just fine, even after enabling various debug and file system options.

The hell? How do you manage to get the kernel in? sparc32_defconfig ends up with 5316876 bytes unpacked...

Incidentally, trying to load it via -kernel/-initrd leads to
Configuration device id QEMU version 1 machine id 64
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 15 offset 0
Invalid FCode start byte
CPUs: 1 x TI,TMS390Z55
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Dec 27 2018 19:17
Type 'help' for detailed information
[sparc] Kernel already loaded
switching to new context:
PROMLIB: obio_ranges 1
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 5.7.0-rc1-00002-gcf51e129b968 (al@duke) (gcc version 6.3.0 20170516 (Debian 6.3.0-18), GNU ld (GNU Binutils for Debian) 2.28) #32 Thu May 21 18:36:07 EDT 2020
printk: bootconsole [earlyprom0] enabled
ARCH: SUN4M
TYPE: Sun4m SparcStation10/20
Ethernet address: 52:54:00:12:34:56
303MB HIGHMEM available.
OF stdout device is: /obio/zs@0,100000:a
PROM: Built device tree with 30051 bytes of memory.
Booting Linux...
Power off control detected.

Kernel panic - not syncing: Failed to allocate memory for percpu areas.
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-rc1-00002-gcf51e129b968 #32

[f04f92a8 :
setup_per_cpu_areas+0x58/0x90 ]
[f04edbf4 :
start_kernel+0xc0/0x4a0 ]
[f04ed43c :
continue_boot+0x324/0x334 ]
[00000000 :
0x0 ]

Press Stop-A (L1-A) from sun keyboard or send break twice on console to return to the boot prom

Quoted 8 lines
---[ end Kernel panic - not syncing: Failed to allocate memory for percpu areas. ]---

Giving guest more RAM doesn't change the outcome (well, the number HIGHMEM line is obviously higher, but that's it).

So which sparc32 kernel have you booted with defconfig and how have you done that?

Mainline, with:

qemu-system-sparc -M SS-4 -kernel arch/sparc/boot/zImage -no-reboot \
-snapshot -drive file=rootfs.ext2,format=raw,if=scsi \
-append "panic=-1 slub_debug=FZPUA root=/dev/sda console=ttyS0" -nographic -monitor none

The machine doesn't really matter, though. The root file system is built with buildroot.

Note that I carry two reverts in my qemu images.

Revert "tcx: switch to load_image_mr() and remove prom_addr hack" Revert "cg3: switch to load_image_mr() and remove prom-addr hack"

I have been carrying those since ~2017. I didn't check recently if they are still needed.

If sparc32 is no longer supported in the upstream kernel, would it possibly make sense remove its support ?

Guenter

#43 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 8 lines · Guenter Roeck

Mainline, with:

qemu-system-sparc -M SS-4 -kernel arch/sparc/boot/zImage -no-reboot \
-snapshot -drive file=rootfs.ext2,format=raw,if=scsi \
-append "panic=-1 slub_debug=FZPUA root=/dev/sda console=ttyS0" -nographic -monitor none

The machine doesn't really matter, though.

It does, unfortunately - try that with SS-10 and watch what happens ;-/

#44 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 4 lines · Al Viro
Quoted 2 lines · Guenter Roeck

Mainline, with:

Quoted 8 lines
Quoted 6 lines

qemu-system-sparc -M SS-4 -kernel arch/sparc/boot/zImage -no-reboot \
-snapshot -drive file=rootfs.ext2,format=raw,if=scsi \
-append "panic=-1 slub_debug=FZPUA root=/dev/sda console=ttyS0" -nographic -monitor none

The machine doesn't really matter, though.

It does, unfortunately - try that with SS-10 and watch what happens ;-/

Ugh... It's actually something in -m handling: -m 256 passes, -m 512 leads to that panic.

#45 lore raw

Re: [PATCH] arch/{mips,sparc,microblaze,powerpc}: Don't enable pagefault/preempt twice

Quoted 10 lines · Al Viro
Quoted 9 lines · Al Viro
Quoted 7 lines · Guenter Roeck

Mainline, with:

qemu-system-sparc -M SS-4 -kernel arch/sparc/boot/zImage -no-reboot \
-snapshot -drive file=rootfs.ext2,format=raw,if=scsi \
-append "panic=-1 slub_debug=FZPUA root=/dev/sda console=ttyS0" -nographic -monitor none

Quoted 6 lines
Quoted 3 lines
Quoted 1 line

The machine doesn't really matter, though.

It does, unfortunately - try that with SS-10 and watch what happens ;-/

Ugh... It's actually something in -m handling: -m 256 passes, -m 512 leads to that panic.

Default seems to be 128M. Anyway, see below log for SS-10.

Guenter

---
Configuration device id QEMU version 1 machine id 64
Probing SBus slot 0 offset 0
Probing SBus slot 1 offset 0
Probing SBus slot 2 offset 0
Probing SBus slot 3 offset 0
Probing SBus slot 15 offset 0
Invalid FCode start byte
CPUs: 1 x TI,TMS390Z55
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.1 built on Oct 28 2019 17:08
Type 'help' for detailed information
[sparc] Kernel already loaded
switching to new context:
PROMLIB: obio_ranges 1
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 5.7.0-rc6-00026-g03fb3acae4be ([email protected]) (gcc version 6.5.0 (Buildroot 2018.11-rc2-00071-g4310260), GNU ld (GNU Binutils) 2.31.1) #1 Thu May 21 19:17:48 PDT 2020
printk: bootconsole [earlyprom0] enabled
ARCH: SUN4M
TYPE: Sun4m SparcStation10/20
Ethernet address: 52:54:00:12:34:56
OF stdout device is: /obio/zs@0,100000:a
PROM: Built device tree with 30586 bytes of memory.
Booting Linux...
Power off control detected.
Built 1 zonelists, mobility grouping on. Total pages: 25012
Kernel command line: panic=-1 slub_debug=FZPUA root=/dev/sda console=ttyS0
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Sorting __ex_table...
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 103428K/100944K available (5050K kernel code, 178K rwdata, 1212K rodata, 176K init, 158K bss, 4294964812K reserved, 0K cma-reserved, 0K highmem)
NR_IRQS: 64
Console: colour dummy device 80x25
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------

                     A-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
                 A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
             A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
             A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|failed|
         A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
         A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
         A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|failed|
                    double unlock:  ok  |  ok  |failed|  ok  |failed|failed|  ok  |
                  initialize held:failed|failed|failed|failed|failed|failed|failed|
  --------------------------------------------------------------------------
              recursive read-lock:             |  ok  |             |failed|
           recursive read-lock #2:             |  ok  |             |failed|
            mixed read-write-lock:             |failed|             |failed|
            mixed write-read-lock:             |failed|             |failed|
  mixed read-lock/lock-write ABBA:             |failed|             |failed|
   mixed read-lock/lock-read ABBA:             |  ok  |             |failed|
 mixed write-lock/lock-write ABBA:             |failed|             |failed|
  --------------------------------------------------------------------------
     hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
     soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
     hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
     soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
       sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
       sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
         hard-safe-A + irqs-on/12:failed|failed|  ok  |
         soft-safe-A + irqs-on/12:failed|failed|  ok  |
         hard-safe-A + irqs-on/21:failed|failed|  ok  |
         soft-safe-A + irqs-on/21:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
    hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
    soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
    hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
    soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
      hard-irq lock-inversion/123:failed|failed|  ok  |
      soft-irq lock-inversion/123:failed|failed|  ok  |
      hard-irq lock-inversion/132:failed|failed|  ok  |
      soft-irq lock-inversion/132:failed|failed|  ok  |
      hard-irq lock-inversion/213:failed|failed|  ok  |
      soft-irq lock-inversion/213:failed|failed|  ok  |
      hard-irq lock-inversion/231:failed|failed|  ok  |
      soft-irq lock-inversion/231:failed|failed|  ok  |
      hard-irq lock-inversion/312:failed|failed|  ok  |
      soft-irq lock-inversion/312:failed|failed|  ok  |
      hard-irq lock-inversion/321:failed|failed|  ok  |
      soft-irq lock-inversion/321:failed|failed|  ok  |
      hard-irq read-recursion/123:  ok  |
      soft-irq read-recursion/123:  ok  |
      hard-irq read-recursion/132:  ok  |
      soft-irq read-recursion/132:  ok  |
      hard-irq read-recursion/213:  ok  |
      soft-irq read-recursion/213:  ok  |
      hard-irq read-recursion/231:  ok  |
      soft-irq read-recursion/231:  ok  |
      hard-irq read-recursion/312:  ok  |
      soft-irq read-recursion/312:  ok  |
      hard-irq read-recursion/321:  ok  |
      soft-irq read-recursion/321:  ok  |
  --------------------------------------------------------------------------
  | Wound/wait tests |
  ---------------------
                  ww api failures:  ok  |  ok  |  ok  |
               ww contexts mixing:failed|  ok  |
             finishing ww context:  ok  |  ok  |  ok  |  ok  |
               locking mismatches:  ok  |  ok  |  ok  |
                 EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
           spinlock nest unlocked:failed|
  -----------------------------------------------------
                                 |block | try  |context|
  -----------------------------------------------------
                          context:failed|  ok  |  ok  |
                              try:failed|  ok  |failed|
                            block:failed|  ok  |failed|
                         spinlock:failed|  ok  |failed|

--------------------------------------------------------
164 out of 262 testcases failed, as expected. |
----------------------------------------------------
clocksource: timer_cs: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 1763180808480 ns Calibrating delay loop... 518.14 BogoMIPS (lpj36288)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.22+0x50/0x1e4 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 0, 7168 bytes, linear)
NET: Registered protocol family 16
IOMMU: impl 0 vers 3 table 0x(ptrval)[262144 B] map [65536 b]
vgaarb: loaded
SCSI subsystem initialized
clocksource: Switched to clocksource timer_cs
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 6144 bytes, linear)
TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
TCP bind hash table entries: 1024 (order: 2, 20480 bytes, linear)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 12288 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 12288 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
apc: power management initialized
random: fast init done
workingset: timestamp_bits0 max_order bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jitterentropy: Initialization failed with host not compliant with requirements: 2
io scheduler mq-deadline registered
io scheduler kyber registered
String selftests succeeded
test_firmware: interface ready
test passed
test_bitmap: loaded.
test_bitmap: parselist: 14: input is '0-2047:128/256' OK, Time: 2000
test_bitmap: parselist_user: 14: input is '0-2047:128/256' OK, Time: 3000
test_bitmap: all 1663 tests passed
test_uuid: all 18 tests passed
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 450500 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 249000 nsec
crc32_combine: 8373 self tests passed
crc32c_combine: 8373 self tests passed
rbtree testing
-> test 1 (latency of nnodes insert+delete): 0 cycles
-> test 2 (latency of nnodes cached insert+delete): 0 cycles
-> test 3 (latency of inorder traversal): 0 cycles
-> test 4 (latency to fetch first node)
non-cached: 0 cycles
cached: 0 cycles
augmented rbtree testing
-> test 1 (latency of nnodes insert+delete): 0 cycles
-> test 2 (latency of nnodes cached insert+delete): 0 cycles
interval tree insert/remove
-> 0 cycles
interval tree search
-> 0 cycles (2692 results)
ffd374f8: ttyS0 at MMIO 0xf1100000 (irq = 5, base_baud = 307200) is a zs
Console: ttyS0 (SunZilog zs0)
printk: console [ttyS0] enabled
printk: console [ttyS0] enabled
printk: bootconsole [earlyprom0] disabled
printk: bootconsole [earlyprom0] disabled
ffd374f8: ttyS1 at MMIO 0xf1100004 (irq = 5, base_baud = 307200) is a zs
ffd37770: Keyboard at MMIO 0xf1000000 (irq = 5) is a zs
ffd37770: Mouse at MMIO 0xf1000004 (irq = 5) is a zs
brd: module loaded
esp ffd392ec: esp0: regs[(ptrval):(ptrval)] irq[2]
esp ffd392ec: esp0: is a FAS100A, 40 MHz (ccf=0), SCSI ID 7
scsi host0: esp
scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
sr 0:0:2:0: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] 40960 512-byte logical blocks: (21.0 MB/20.0 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Attached SCSI disk
ioremap: done with statics, switching to malloc
SunLance: using auto-carrier-detection.
eth0: LANCE 52:54:00:12:34:56
rtc-m48t59 rtc-m48t59.0: IRQ index 0 not found
rtc-m48t59 rtc-m48t59.0: registered as rtc0
rtc-m48t59 rtc-m48t59.0: setting system clock to 2020-05-22T02:19:50 UTC (1590113990)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
TAP version 14
# Subtest: sysctl_test
1..10
ok 1 - sysctl_test_api_dointvec_null_tbl_data
ok 2 - sysctl_test_api_dointvec_table_maxlen_unset
ok 3 - sysctl_test_api_dointvec_table_len_is_zero
ok 4 - sysctl_test_api_dointvec_table_read_but_position_set
ok 5 - sysctl_test_dointvec_read_happy_single_positive
ok 6 - sysctl_test_dointvec_read_happy_single_negative
ok 7 - sysctl_test_dointvec_write_happy_single_positive
ok 8 - sysctl_test_dointvec_write_happy_single_negative
ok 9 - sysctl_test_api_dointvec_write_single_less_int_min
ok 10 - sysctl_test_api_dointvec_write_single_greater_int_max
ok 1 - sysctl_test
# Subtest: ext4_inode_test
1..1
ok 1 - inode_test_xtimestamp_decoding
ok 2 - ext4_inode_test
# Subtest: kunit-try-catch-test
1..2
ok 1 - kunit_test_try_catch_successful_try_no_catch
ok 2 - kunit_test_try_catch_unsuccessful_try_does_catch
ok 3 - kunit-try-catch-test
# Subtest: kunit-resource-test
1..5
ok 1 - kunit_resource_test_init_resources
ok 2 - kunit_resource_test_alloc_resource
ok 3 - kunit_resource_test_destroy_resource
ok 4 - kunit_resource_test_cleanup_resources
ok 5 - kunit_resource_test_proper_free_ordering
ok 4 - kunit-resource-test
# Subtest: kunit-log-test
1..1
put this in log.
this too.
add to suite log.
along with this.
ok 1 - kunit_log_test
ok 5 - kunit-log-test
# Subtest: string-stream-test
1..3
ok 1 - string_stream_test_empty_on_creation
ok 2 - string_stream_test_not_empty_after_add
ok 3 - string_stream_test_get_string
ok 6 - string-stream-test
# Subtest: list-kunit-test
1..36
ok 1 - list_test_list_init
ok 2 - list_test_list_add
ok 3 - list_test_list_add_tail
ok 4 - list_test_list_del
ok 5 - list_test_list_replace
ok 6 - list_test_list_replace_init
ok 7 - list_test_list_swap
ok 8 - list_test_list_del_init
ok 9 - list_test_list_move
ok 10 - list_test_list_move_tail
ok 11 - list_test_list_bulk_move_tail
ok 12 - list_test_list_is_first
ok 13 - list_test_list_is_last
ok 14 - list_test_list_empty
ok 15 - list_test_list_empty_careful
ok 16 - list_test_list_rotate_left
ok 17 - list_test_list_rotate_to_front
ok 18 - list_test_list_is_singular
ok 19 - list_test_list_cut_position
ok 20 - list_test_list_cut_before
ok 21 - list_test_list_splice
ok 22 - list_test_list_splice_tail
ok 23 - list_test_list_splice_init
ok 24 - list_test_list_splice_tail_init
ok 25 - list_test_list_entry
ok 26 - list_test_list_first_entry
ok 27 - list_test_list_last_entry
ok 28 - list_test_list_first_entry_or_null
ok 29 - list_test_list_next_entry
ok 30 - list_test_list_prev_entry
ok 31 - list_test_list_for_each
ok 32 - list_test_list_for_each_prev
ok 33 - list_test_list_for_each_safe
ok 34 - list_test_list_for_each_prev_safe
ok 35 - list_test_list_for_each_entry
ok 36 - list_test_list_for_each_entry_reverse
ok 7 - list-kunit-test
# Subtest: qos-kunit-test
1..3
ok 1 - freq_qos_test_min
ok 2 - freq_qos_test_maxdef
ok 3 - freq_qos_test_readd
ok 8 - qos-kunit-test
EXT4-fs (sda): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:0.
devtmpfs: mounted
Freeing unused kernel memory: 176K
This architecture does not have kernel memory protection.
Run /sbin/init as init process
EXT4-fs (sda): re-mounted. Opts: (null)
ext4 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) Starting syslogd: OK
Starting klogd: OK
Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read) done.
Starting network: OK
Found console ttyS0

Linux version 5.7.0-rc6-00026-g03fb3acae4be ([email protected]) (gcc version 6.5.0 (Buildroot 2018.11-rc2-00071-g4310260), GNU ld (GNU Binutils) 2.31.1) #1 Thu May 21 19:17:48 PDT 2020 Boot successful.
Rebooting
Found console ttyS0
Stopping network: OK
Saving random seed... random: dd: uninitialized urandom read (512 bytes read)
done.
Stopping klogd: OK
Stopping syslogd: OK
umount: devtmpfs busy - remounted read-only
EXT4-fs (sda): re-mounted. Opts: (null)
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
sd 0:0:0:0: [sda] Synchronizing SCSI cache
reboot: Restarting system

#46 lore raw

PATCH v3 8/15 arch/kmap: Ensure kmap_prot visibility

In reply to [email protected]

From: Ira Weiny <[email protected]>

We want to support kmap_atomic_prot() on all architectures and it makes sense to define kmap_atomic() to use the default kmap_prot.

So we ensure all arch's have a globally available kmap_prot either as a define or exported symbol.

---
 arch/microblaze/include/asm/highmem.h | 2 +-
 arch/microblaze/mm/init.c             | 3 ---
 arch/powerpc/include/asm/highmem.h    | 2 +-
 arch/powerpc/mm/mem.c                 | 3 ---
 arch/sparc/mm/highmem.c               | 1 +
 5 files changed, 3 insertions(+), 8 deletions(-)
arch/microblaze/include/asm/highmem.h +1 -1
index c3cbda90391d..90d96239152f 100644
@@ -25,8 +25,8 @@
 #include <linux/uaccess.h>
 #include <asm/fixmap.h>
 
+#define kmap_prot		PAGE_KERNEL
 extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
arch/microblaze/mm/init.c +0 -3
index 1ffbfa96b9b8..a467686c13af 100644
@@ -49,8 +49,6 @@ unsigned long lowmem_size;
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
 EXPORT_SYMBOL(kmap_pte);
-pgprot_t kmap_prot;
-EXPORT_SYMBOL(kmap_prot);
 
 static inline pte_t *virt_to_kpte(unsigned long vaddr)
 {
@@ -68,7 +66,6 @@ static void __init highmem_init(void)
 	pkmap_page_table = virt_to_kpte(PKMAP_BASE);
 
 	kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
-	kmap_prot = PAGE_KERNEL;
 }
 
 static void highmem_setup(void)
arch/powerpc/include/asm/highmem.h +1 -1
index 373a470df205..ee5de974c5ef 100644
@@ -29,8 +29,8 @@
 #include <asm/page.h>
 #include <asm/fixmap.h>
 
+#define kmap_prot		PAGE_KERNEL
 extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
arch/powerpc/mm/mem.c +0 -3
index 041ed7cfd341..3f642b058731 100644
@@ -64,8 +64,6 @@ bool init_mem_is_free;
 #ifdef CONFIG_HIGHMEM
 pte_t *kmap_pte;
 EXPORT_SYMBOL(kmap_pte);
-pgprot_t kmap_prot;
-EXPORT_SYMBOL(kmap_prot);
 #endif
 
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
@@ -245,7 +243,6 @@ void __init paging_init(void)
 	pkmap_page_table = virt_to_kpte(PKMAP_BASE);
 
 	kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
-	kmap_prot = PAGE_KERNEL;
 #endif /* CONFIG_HIGHMEM */
 
 	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n",
arch/sparc/mm/highmem.c +1 -0
index 469786bc430f..9f06d75e88e1 100644
@@ -33,6 +33,7 @@
 #include <asm/vaddrs.h>
 
 pgprot_t kmap_prot;
+EXPORT_SYMBOL(kmap_prot);
 
 static pte_t *kmap_pte;
 
Signature · 1 line
2.25.1
#47 lore raw

PATCH v3 9/15 arch/kmap: Don't hard code kmap_prot values

In reply to [email protected]

From: Ira Weiny <[email protected]>

To support kmap_atomic_prot() on all architectures each arch must support protections passed in to them.

Change csky, mips, nds32 and xtensa to use their global constant kmap_prot rather than a hard coded value which was equal.

---
changes from V1:
Mention that kmap_prot is a constant in commit message

---
 arch/csky/mm/highmem.c   | 2 +-
 arch/mips/mm/highmem.c   | 2 +-
 arch/nds32/mm/highmem.c  | 2 +-
 arch/xtensa/mm/highmem.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
arch/csky/mm/highmem.c +1 -1
index 0aafbbbe651c..f4311669b5bb 100644
@@ -32,7 +32,7 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
+	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
 	flush_tlb_one((unsigned long)vaddr);
 
 	return (void *)vaddr;
arch/mips/mm/highmem.c +1 -1
index 155fbb107b35..87023bd1a33c 100644
@@ -29,7 +29,7 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
+	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
 	local_flush_tlb_one((unsigned long)vaddr);
 
 	return (void*) vaddr;
arch/nds32/mm/highmem.c +1 -1
index f6e6915c0d31..809f8c830f06 100644
@@ -21,7 +21,7 @@ void *kmap_atomic_high(struct page *page)
 
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	pte = (page_to_pfn(page) << PAGE_SHIFT) | (PAGE_KERNEL);
+	pte = (page_to_pfn(page) << PAGE_SHIFT) | (kmap_prot);
 	ptep = pte_offset_kernel(pmd_off_k(vaddr), vaddr);
 	set_pte(ptep, pte);
 
arch/xtensa/mm/highmem.c +1 -1
index 4de323e43682..50168b09510a 100644
@@ -48,7 +48,7 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte + idx)));
 #endif
-	set_pte(kmap_pte + idx, mk_pte(page, PAGE_KERNEL_EXEC));
+	set_pte(kmap_pte + idx, mk_pte(page, kmap_prot));
 
 	return (void *)vaddr;
 }
Signature · 1 line
2.25.1
#48 lore raw

PATCH v3 10/15 arch/kmap: Define kmap_atomic_prot() for all arch's

In reply to [email protected]

From: Ira Weiny <[email protected]>

To support kmap_atomic_prot(), all architectures need to support protections passed to their kmap_atomic_high() function. Pass protections into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to match.

Then define kmap_atomic_prot() as a core function which calls kmap_atomic_high_prot() when needed.

Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with the default kmap_prot exported by the architectures.

---
Changes from V1:
Adjust for bisect-ability
Adjust for removing kunmap_atomic_high
Remove kmap_atomic_high_prot declarations

---
 arch/arc/mm/highmem.c                 |  6 +++---
 arch/arm/mm/highmem.c                 |  6 +++---
 arch/csky/mm/highmem.c                |  6 +++---
 arch/microblaze/include/asm/highmem.h | 16 ----------------
 arch/mips/mm/highmem.c                |  6 +++---
 arch/nds32/mm/highmem.c               |  6 +++---
 arch/powerpc/include/asm/highmem.h    | 17 -----------------
 arch/sparc/mm/highmem.c               |  6 +++---
 arch/x86/include/asm/highmem.h        | 14 --------------
 arch/xtensa/mm/highmem.c              |  6 +++---
 include/linux/highmem.h               |  7 ++++---
 11 files changed, 25 insertions(+), 71 deletions(-)
arch/arc/mm/highmem.c +3 -3
index 5d3eab4ac0b0..479b0d72d3cf 100644
@@ -49,7 +49,7 @@
 extern pte_t * pkmap_page_table;
 static pte_t * fixmap_page_table;
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	int idx, cpu_idx;
 	unsigned long vaddr;
@@ -59,11 +59,11 @@ void *kmap_atomic_high(struct page *page)
 	vaddr = FIXMAP_ADDR(idx);
 
 	set_pte_at(&init_mm, vaddr, fixmap_page_table + idx,
-		   mk_pte(page, kmap_prot));
+		   mk_pte(page, prot));
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kv)
 {
arch/arm/mm/highmem.c +3 -3
index ac8394655a6e..e013f6b81328 100644
@@ -31,7 +31,7 @@ static inline pte_t get_fixmap_pte(unsigned long vaddr)
 	return *ptep;
 }
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned int idx;
 	unsigned long vaddr;
@@ -67,11 +67,11 @@ void *kmap_atomic_high(struct page *page)
 	 * in place, so the contained TLB flush ensures the TLB is updated
 	 * with the new mapping.
 	 */
-	set_fixmap_pte(idx, mk_pte(page, kmap_prot));
+	set_fixmap_pte(idx, mk_pte(page, prot));
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kvaddr)
 {
arch/csky/mm/highmem.c +3 -3
index f4311669b5bb..3ae5c8cd7619 100644
@@ -21,7 +21,7 @@ EXPORT_SYMBOL(kmap_flush_tlb);
 
 EXPORT_SYMBOL(kmap);
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
 	int idx, type;
@@ -32,12 +32,12 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, prot));
 	flush_tlb_one((unsigned long)vaddr);
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kvaddr)
 {
arch/microblaze/include/asm/highmem.h +0 -16
index 90d96239152f..d7c55cfd27bd 100644
@@ -51,22 +51,6 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
-static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
-{
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	return kmap_atomic_high_prot(page, prot);
-}
-
-static inline void *kmap_atomic_high(struct page *page)
-{
-	return kmap_atomic_high_prot(page, kmap_prot);
-}
-
 #define flush_cache_kmaps()	{ flush_icache(); flush_dcache(); }
 
 #endif /* __KERNEL__ */
arch/mips/mm/highmem.c +3 -3
index 87023bd1a33c..37e244cdb14e 100644
@@ -18,7 +18,7 @@ void kmap_flush_tlb(unsigned long addr)
 }
 EXPORT_SYMBOL(kmap_flush_tlb);
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
 	int idx, type;
@@ -29,12 +29,12 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, prot));
 	local_flush_tlb_one((unsigned long)vaddr);
 
 	return (void*) vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kvaddr)
 {
arch/nds32/mm/highmem.c +3 -3
index 809f8c830f06..63ded527c1e8 100644
@@ -10,7 +10,7 @@
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned int idx;
 	unsigned long vaddr, pte;
@@ -21,7 +21,7 @@ void *kmap_atomic_high(struct page *page)
 
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	pte = (page_to_pfn(page) << PAGE_SHIFT) | (kmap_prot);
+	pte = (page_to_pfn(page) << PAGE_SHIFT) | prot;
 	ptep = pte_offset_kernel(pmd_off_k(vaddr), vaddr);
 	set_pte(ptep, pte);
 
@@ -32,7 +32,7 @@ void *kmap_atomic_high(struct page *page)
 	return (void *)vaddr;
 }
 
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kvaddr)
 {
arch/powerpc/include/asm/highmem.h +0 -17
index ee5de974c5ef..8d8ee3fcd800 100644
@@ -59,23 +59,6 @@ extern pte_t *pkmap_page_table;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
-static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
-{
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	return kmap_atomic_high_prot(page, prot);
-}
-
-static inline void *kmap_atomic_high(struct page *page)
-{
-	return kmap_atomic_high_prot(page, kmap_prot);
-}
-
-
 #define flush_cache_kmaps()	flush_cache_all()
 
 #endif /* __KERNEL__ */
arch/sparc/mm/highmem.c +3 -3
index 9f06d75e88e1..414f578d1e57 100644
@@ -54,7 +54,7 @@ void __init kmap_init(void)
         kmap_prot = __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
 }
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	unsigned long vaddr;
 	long idx, type;
@@ -73,7 +73,7 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, prot));
 /* XXX Fix - Anton */
 #if 0
 	__flush_tlb_one(vaddr);
@@ -83,7 +83,7 @@ void *kmap_atomic_high(struct page *page)
 
 	return (void*) vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kvaddr)
 {
arch/x86/include/asm/highmem.h +0 -14
index be66b77885a0..0f420b24e0fc 100644
@@ -58,20 +58,6 @@ extern unsigned long highstart_pfn, highend_pfn;
 #define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
-static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
-{
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	return kmap_atomic_high_prot(page, prot);
-}
-static inline void *kmap_atomic_high(struct page *page)
-{
-	return kmap_atomic_high_prot(page, kmap_prot);
-}
 void *kmap_atomic_pfn(unsigned long pfn);
 void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
 
arch/xtensa/mm/highmem.c +3 -3
index 50168b09510a..99b5ad137ab5 100644
@@ -37,7 +37,7 @@ static inline enum fixed_addresses kmap_idx(int type, unsigned long color)
 		color;
 }
 
-void *kmap_atomic_high(struct page *page)
+void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
@@ -48,11 +48,11 @@ void *kmap_atomic_high(struct page *page)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte + idx)));
 #endif
-	set_pte(kmap_pte + idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte + idx, mk_pte(page, prot));
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic_high);
+EXPORT_SYMBOL(kmap_atomic_high_prot);
 
 void kunmap_atomic_high(void *kvaddr)
 {
include/linux/highmem.h +4 -3
index c36c0ee09423..89838306f50d 100644
@@ -32,7 +32,7 @@ static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
 #include <asm/kmap_types.h>
 
 #ifdef CONFIG_HIGHMEM
-extern void *kmap_atomic_high(struct page *page);
+extern void *kmap_atomic_high_prot(struct page *page, pgprot_t prot);
 extern void kunmap_atomic_high(void *kvaddr);
 #include <asm/highmem.h>
 
@@ -76,14 +76,15 @@ static inline void kunmap(struct page *page)
  * be used in IRQ contexts, so in some (very limited) cases we need
  * it.
  */
-static inline void *kmap_atomic(struct page *page)
+static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 {
 	preempt_disable();
 	pagefault_disable();
 	if (!PageHighMem(page))
 		return page_address(page);
-	return kmap_atomic_high(page);
+	return kmap_atomic_high_prot(page, prot);
 }
+#define kmap_atomic(page)	kmap_atomic_prot(page, kmap_prot)
 
 /* declarations for linux/mm/highmem.c */
 unsigned int nr_free_highpages(void);
Signature · 1 line
2.25.1
#49 lore raw

Re: [PATCH V3 10/15] arch/kmap: Define kmap_atomic_prot() for all arch's

Hi,

Quoted 7 lines · On Thu, May 07, 2020 at 07:59:58AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

To support kmap_atomic_prot(), all architectures need to support protections passed to their kmap_atomic_high() function. Pass protections into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to match.

Quoted 8 lines

Then define kmap_atomic_prot() as a core function which calls kmap_atomic_high_prot() when needed.

Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with the default kmap_prot exported by the architectures.

This patch causes a variety of crashes whem booting powerpc images in qemu.

There are lots of warnings such as:

WARNING: CPU: 0 PID: 0 at lib/locking-selftest.c:743 irqsafe1_hard_spin_12+0x50/0xb0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Tainted: G        W         5.7.0-rc5-next-20200515 #1
NIP:  c0660c7c LR: c0660c44 CTR: c0660c2c
REGS: c1223e68 TRAP: 0700   Tainted: G        W          (5.7.0-rc5-next-20200515)
MSR:  00021000 <CE,ME>  CR: 28000224  XER: 20000000

GPR00: c0669c78 c1223f20 c113d560 c0660c44 00000000 00000001 c1223ea8 00000001
GPR08: 00000000 00000001 0000fffc ffffffff 88000222 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 c0000000 00000000 00000000 c1125084
GPR24: c1125084 c1230000 c1879538 fffffffc 00000001 00000000 c1011afc c1230000 NIP [c0660c7c] irqsafe1_hard_spin_12+0x50/0xb0
LR [c0660c44] irqsafe1_hard_spin_12+0x18/0xb0

Call Trace:
[c1223f20] [c1880000] megasas_mgmt_info+0xee4/0x1008 (unreliable)
[c1223f40] [c0669c78] dotest+0x38/0x550
[c1223f70] [c066aa4c] locking_selftest+0x8bc/0x1d54
[c1223fa0] [c10e0bc8] start_kernel+0x3ec/0x510
[c1223ff0] [c00003a0] set_ivor+0x118/0x154
Instruction dump:
81420000 38e80001 3d4a0001 2c080000 91420000 90e20488 40820008 91020470
81290000 5529031e 7d290034 5529d97e <0f090000> 3fe0c11c 3bff3964 3bff00ac
irq event stamp: 588
hardirqs last  enabled at (587): [<c00b9fe4>] vprintk_emit+0x1b4/0x33c
hardirqs last disabled at (588): [<c0660c44>] irqsafe1_hard_spin_12+0x18/0xb0
softirqs last  enabled at (0): [<00000000>] 0x0
softirqs last disabled at (0): [<00000000>] 0x0
---[ end trace b18fe9e172f99d03 ]---

This is followed by:

BUG: sleeping function called from invalid context at lib/mpi/mpi-pow.c:245
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: cryptomgr_test
INFO: lockdep is turned off.
CPU: 0 PID: 14 Comm: cryptomgr_test Tainted: G        W         5.7.0-rc5-next-20200515 #1
Call Trace:
[ce221b58] [c008755c] ___might_sleep+0x280/0x2a8 (unreliable)
[ce221b78] [c06bc524] mpi_powm+0x634/0xc50
[ce221c38] [c05eafdc] rsa_dec+0x88/0x134
[ce221c78] [c05f3b40] test_akcipher_one+0x678/0x804
[ce221dc8] [c05f3d7c] alg_test_akcipher+0xb0/0x130
[ce221df8] [c05ee674] alg_test.part.0+0xb4/0x458
[ce221ed8] [c05ed2b0] cryptomgr_test+0x30/0x50
[ce221ef8] [c007cd74] kthread+0x134/0x170
[ce221f38] [c001433c] ret_from_kernel_thread+0x14/0x1c
Kernel panic - not syncing: Aiee, killing interrupt handler!
CPU: 0 PID: 14 Comm: cryptomgr_test Tainted: G        W         5.7.0-rc5-next-20200515 #1
Call Trace:
[ce221e08] [c00530fc] panic+0x148/0x34c (unreliable)
[ce221e68] [c0056460] do_exit+0xac0/0xb40
[ce221eb8] [c00f5be8] find_kallsyms_symbol_value+0x0/0x128
[ce221ed8] [c05ed2d0] crypto_alg_put+0x0/0x70
[ce221ef8] [c007cd74] kthread+0x134/0x170
[ce221f38] [c001433c] ret_from_kernel_thread+0x14/0x1c

Bisect log is attached. The patch can not easily be reverted since it results in compile errors.

Note that similar failures are seen with sparc32 images. Those bisect to a different patch, but reverting that patch doesn't fix the problem. The failure pattern (warnings followed by a crash in cryptomgr_test) is the same.

Guenter

---
# bad: [bdecf38f228bcca73b31ada98b5b7ba1215eb9c9] Add linux-next specific files for 20200515
# good: [2ef96a5bb12be62ef75b5828c0aab838ebb29cb8] Linux 5.7-rc5
git bisect start 'HEAD' 'v5.7-rc5'
# good: [3674d7aa7a8e61d993886c2fb7c896c5ef85e988] Merge remote-tracking branch 'crypto/master' git bisect good 3674d7aa7a8e61d993886c2fb7c896c5ef85e988
# good: [87f6f21783522e6d62127cf33ae5e95f50874beb] Merge remote-tracking branch 'spi/for-next'
git bisect good 87f6f21783522e6d62127cf33ae5e95f50874beb
# good: [5c428e8277d5d97c85126387d4e00aa5adde4400] Merge remote-tracking branch 'staging/staging-next' git bisect good 5c428e8277d5d97c85126387d4e00aa5adde4400
# good: [f68de67ed934e7bdef4799fd7777c86f33f14982] Merge remote-tracking branch 'hyperv/hyperv-next' git bisect good f68de67ed934e7bdef4799fd7777c86f33f14982
# bad: [54acd2dc52b069da59639eea0d0c92726f32fb01] mm/memblock: fix a typo in comment "implict"->"implicit" git bisect bad 54acd2dc52b069da59639eea0d0c92726f32fb01
# good: [784a17aa58a529b84f7cc50f351ed4acf3bd11f3] mm: remove the pgprot argument to __vmalloc
git bisect good 784a17aa58a529b84f7cc50f351ed4acf3bd11f3
# good: [6cd8137ff37e9a37aee2d2a8889c8beb8eab192f] khugepaged: replace the usage of system(3) in the test git bisect good 6cd8137ff37e9a37aee2d2a8889c8beb8eab192f
# bad: [6987da379826ed01b8a1cf046b67cc8cc10117cc] sparc: remove unnecessary includes
git bisect bad 6987da379826ed01b8a1cf046b67cc8cc10117cc
# good: [bc17b545388f64c09e83e367898e28f60277c584] mm/hugetlb: define a generic fallback for is_hugepage_only_range() git bisect good bc17b545388f64c09e83e367898e28f60277c584
# good: [9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011] arch-kmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect good 9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011
# bad: [89194ba5ee31567eeee9c81101b334c8e3248198] arch/kmap: define kmap_atomic_prot() for all arch's git bisect bad 89194ba5ee31567eeee9c81101b334c8e3248198
# good: [022785d2bea99f8bc2a37b7b6c525eea26f6ac59] arch-kunmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect good 022785d2bea99f8bc2a37b7b6c525eea26f6ac59
# good: [a13c2f39e3f0519ddee57d26cc66ec70e3546106] arch/kmap: don't hard code kmap_prot values
git bisect good a13c2f39e3f0519ddee57d26cc66ec70e3546106

# first bad commit: [89194ba5ee31567eeee9c81101b334c8e3248198] arch/kmap: define kmap_atomic_prot() for all arch's
author
#50 lore raw

Re: [PATCH V3 10/15] arch/kmap: Define kmap_atomic_prot() for all arch's

Quoted 13 lines · Guenter Roeck

Hi,

Quoted 10 lines · On Thu, May 07, 2020 at 07:59:58AM -0700, [email protected] wrote:

From: Ira Weiny <[email protected]>

To support kmap_atomic_prot(), all architectures need to support protections passed to their kmap_atomic_high() function. Pass protections into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to match.

Then define kmap_atomic_prot() as a core function which calls kmap_atomic_high_prot() when needed.

Quoted 7 lines
Quoted 5 lines

Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with the default kmap_prot exported by the architectures.

This patch causes a variety of crashes whem booting powerpc images in qemu.

PowerPC has the same issue as microblaze and sparc.

I'm preping a patch with all three fixed which fixes the kunmap_atomic clean up patch...

Sorry for not seeing this last night...

Hopefully this can explain all the problems. It is clearly a bug.

Ira

Quoted 101 lines

There are lots of warnings such as:

WARNING: CPU: 0 PID: 0 at lib/locking-selftest.c:743 irqsafe1_hard_spin_12+0x50/0xb0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Tainted: G        W         5.7.0-rc5-next-20200515 #1
NIP:  c0660c7c LR: c0660c44 CTR: c0660c2c
REGS: c1223e68 TRAP: 0700   Tainted: G        W          (5.7.0-rc5-next-20200515)
MSR:  00021000 <CE,ME>  CR: 28000224  XER: 20000000

GPR00: c0669c78 c1223f20 c113d560 c0660c44 00000000 00000001 c1223ea8 00000001
GPR08: 00000000 00000001 0000fffc ffffffff 88000222 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 c0000000 00000000 00000000 c1125084
GPR24: c1125084 c1230000 c1879538 fffffffc 00000001 00000000 c1011afc c1230000 NIP [c0660c7c] irqsafe1_hard_spin_12+0x50/0xb0
LR [c0660c44] irqsafe1_hard_spin_12+0x18/0xb0

Call Trace:
[c1223f20] [c1880000] megasas_mgmt_info+0xee4/0x1008 (unreliable)
[c1223f40] [c0669c78] dotest+0x38/0x550
[c1223f70] [c066aa4c] locking_selftest+0x8bc/0x1d54
[c1223fa0] [c10e0bc8] start_kernel+0x3ec/0x510
[c1223ff0] [c00003a0] set_ivor+0x118/0x154
Instruction dump:
81420000 38e80001 3d4a0001 2c080000 91420000 90e20488 40820008 91020470
81290000 5529031e 7d290034 5529d97e <0f090000> 3fe0c11c 3bff3964 3bff00ac
irq event stamp: 588
hardirqs last  enabled at (587): [<c00b9fe4>] vprintk_emit+0x1b4/0x33c
hardirqs last disabled at (588): [<c0660c44>] irqsafe1_hard_spin_12+0x18/0xb0
softirqs last  enabled at (0): [<00000000>] 0x0
softirqs last disabled at (0): [<00000000>] 0x0
---[ end trace b18fe9e172f99d03 ]---

This is followed by:

BUG: sleeping function called from invalid context at lib/mpi/mpi-pow.c:245
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: cryptomgr_test
INFO: lockdep is turned off.
CPU: 0 PID: 14 Comm: cryptomgr_test Tainted: G        W         5.7.0-rc5-next-20200515 #1
Call Trace:
[ce221b58] [c008755c] ___might_sleep+0x280/0x2a8 (unreliable)
[ce221b78] [c06bc524] mpi_powm+0x634/0xc50
[ce221c38] [c05eafdc] rsa_dec+0x88/0x134
[ce221c78] [c05f3b40] test_akcipher_one+0x678/0x804
[ce221dc8] [c05f3d7c] alg_test_akcipher+0xb0/0x130
[ce221df8] [c05ee674] alg_test.part.0+0xb4/0x458
[ce221ed8] [c05ed2b0] cryptomgr_test+0x30/0x50
[ce221ef8] [c007cd74] kthread+0x134/0x170
[ce221f38] [c001433c] ret_from_kernel_thread+0x14/0x1c
Kernel panic - not syncing: Aiee, killing interrupt handler!
CPU: 0 PID: 14 Comm: cryptomgr_test Tainted: G        W         5.7.0-rc5-next-20200515 #1
Call Trace:
[ce221e08] [c00530fc] panic+0x148/0x34c (unreliable)
[ce221e68] [c0056460] do_exit+0xac0/0xb40
[ce221eb8] [c00f5be8] find_kallsyms_symbol_value+0x0/0x128
[ce221ed8] [c05ed2d0] crypto_alg_put+0x0/0x70
[ce221ef8] [c007cd74] kthread+0x134/0x170
[ce221f38] [c001433c] ret_from_kernel_thread+0x14/0x1c

Bisect log is attached. The patch can not easily be reverted since it results in compile errors.

Note that similar failures are seen with sparc32 images. Those bisect to a different patch, but reverting that patch doesn't fix the problem. The failure pattern (warnings followed by a crash in cryptomgr_test) is the same.

Guenter

---
# bad: [bdecf38f228bcca73b31ada98b5b7ba1215eb9c9] Add linux-next specific files for 20200515
# good: [2ef96a5bb12be62ef75b5828c0aab838ebb29cb8] Linux 5.7-rc5
git bisect start 'HEAD' 'v5.7-rc5'
# good: [3674d7aa7a8e61d993886c2fb7c896c5ef85e988] Merge remote-tracking branch 'crypto/master' git bisect good 3674d7aa7a8e61d993886c2fb7c896c5ef85e988
# good: [87f6f21783522e6d62127cf33ae5e95f50874beb] Merge remote-tracking branch 'spi/for-next'
git bisect good 87f6f21783522e6d62127cf33ae5e95f50874beb
# good: [5c428e8277d5d97c85126387d4e00aa5adde4400] Merge remote-tracking branch 'staging/staging-next' git bisect good 5c428e8277d5d97c85126387d4e00aa5adde4400
# good: [f68de67ed934e7bdef4799fd7777c86f33f14982] Merge remote-tracking branch 'hyperv/hyperv-next' git bisect good f68de67ed934e7bdef4799fd7777c86f33f14982
# bad: [54acd2dc52b069da59639eea0d0c92726f32fb01] mm/memblock: fix a typo in comment "implict"->"implicit" git bisect bad 54acd2dc52b069da59639eea0d0c92726f32fb01
# good: [784a17aa58a529b84f7cc50f351ed4acf3bd11f3] mm: remove the pgprot argument to __vmalloc
git bisect good 784a17aa58a529b84f7cc50f351ed4acf3bd11f3
# good: [6cd8137ff37e9a37aee2d2a8889c8beb8eab192f] khugepaged: replace the usage of system(3) in the test git bisect good 6cd8137ff37e9a37aee2d2a8889c8beb8eab192f
# bad: [6987da379826ed01b8a1cf046b67cc8cc10117cc] sparc: remove unnecessary includes
git bisect bad 6987da379826ed01b8a1cf046b67cc8cc10117cc
# good: [bc17b545388f64c09e83e367898e28f60277c584] mm/hugetlb: define a generic fallback for is_hugepage_only_range() git bisect good bc17b545388f64c09e83e367898e28f60277c584
# good: [9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011] arch-kmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect good 9b5aa5b43f957f03a1f4a9aff5f7924e2ebbc011
# bad: [89194ba5ee31567eeee9c81101b334c8e3248198] arch/kmap: define kmap_atomic_prot() for all arch's git bisect bad 89194ba5ee31567eeee9c81101b334c8e3248198
# good: [022785d2bea99f8bc2a37b7b6c525eea26f6ac59] arch-kunmap_atomic-consolidate-duplicate-code-checkpatch-fixes git bisect good 022785d2bea99f8bc2a37b7b6c525eea26f6ac59
# good: [a13c2f39e3f0519ddee57d26cc66ec70e3546106] arch/kmap: don't hard code kmap_prot values
git bisect good a13c2f39e3f0519ddee57d26cc66ec70e3546106

# first bad commit: [89194ba5ee31567eeee9c81101b334c8e3248198] arch/kmap: define kmap_atomic_prot() for all arch's
#51 lore raw

PATCH v3 11/15 drm: Remove drm specific kmap_atomic code

In reply to [email protected]

From: Ira Weiny <[email protected]>

kmap_atomic_prot() is now exported by all architectures. Use this function rather than open coding a driver specific kmap_atomic.

---
 drivers/gpu/drm/ttm/ttm_bo_util.c    | 56 ++--------------------------
 drivers/gpu/drm/vmwgfx/vmwgfx_blit.c | 16 ++++----
 include/drm/ttm/ttm_bo_api.h         |  4 --
 3 files changed, 12 insertions(+), 64 deletions(-)
drivers/gpu/drm/ttm/ttm_bo_util.c +4 -52
index 52d2b71f1588..f09b096ba4fd 100644
@@ -257,54 +257,6 @@ static int ttm_copy_io_page(void *dst, void *src, unsigned long page)
 	return 0;
 }
 
-#ifdef CONFIG_X86
-#define __ttm_kmap_atomic_prot(__page, __prot) kmap_atomic_prot(__page, __prot)
-#define __ttm_kunmap_atomic(__addr) kunmap_atomic(__addr)
-#else
-#define __ttm_kmap_atomic_prot(__page, __prot) vmap(&__page, 1, 0,  __prot)
-#define __ttm_kunmap_atomic(__addr) vunmap(__addr)
-#endif
-
-
-/**
- * ttm_kmap_atomic_prot - Efficient kernel map of a single page with
- * specified page protection.
- *
- * @page: The page to map.
- * @prot: The page protection.
- *
- * This function maps a TTM page using the kmap_atomic api if available,
- * otherwise falls back to vmap. The user must make sure that the
- * specified page does not have an aliased mapping with a different caching
- * policy unless the architecture explicitly allows it. Also mapping and
- * unmapping using this api must be correctly nested. Unmapping should
- * occur in the reverse order of mapping.
- */
-void *ttm_kmap_atomic_prot(struct page *page, pgprot_t prot)
-{
-	if (pgprot_val(prot) = pgprot_val(PAGE_KERNEL))
-		return kmap_atomic(page);
-	else
-		return __ttm_kmap_atomic_prot(page, prot);
-}
-EXPORT_SYMBOL(ttm_kmap_atomic_prot);
-
-/**
- * ttm_kunmap_atomic_prot - Unmap a page that was mapped using
- * ttm_kmap_atomic_prot.
- *
- * @addr: The virtual address from the map.
- * @prot: The page protection.
- */
-void ttm_kunmap_atomic_prot(void *addr, pgprot_t prot)
-{
-	if (pgprot_val(prot) = pgprot_val(PAGE_KERNEL))
-		kunmap_atomic(addr);
-	else
-		__ttm_kunmap_atomic(addr);
-}
-EXPORT_SYMBOL(ttm_kunmap_atomic_prot);
-
 static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
 				unsigned long page,
 				pgprot_t prot)
@@ -316,13 +268,13 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
 		return -ENOMEM;
 
 	src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
-	dst = ttm_kmap_atomic_prot(d, prot);
+	dst = kmap_atomic_prot(d, prot);
 	if (!dst)
 		return -ENOMEM;
 
 	memcpy_fromio(dst, src, PAGE_SIZE);
 
-	ttm_kunmap_atomic_prot(dst, prot);
+	kunmap_atomic(dst);
 
 	return 0;
 }
@@ -338,13 +290,13 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
 		return -ENOMEM;
 
 	dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
-	src = ttm_kmap_atomic_prot(s, prot);
+	src = kmap_atomic_prot(s, prot);
 	if (!src)
 		return -ENOMEM;
 
 	memcpy_toio(dst, src, PAGE_SIZE);
 
-	ttm_kunmap_atomic_prot(src, prot);
+	kunmap_atomic(src);
 
 	return 0;
 }
drivers/gpu/drm/vmwgfx/vmwgfx_blit.c +8 -6
index bb46ca0c458f..94d456a1d1a9 100644
@@ -374,12 +374,12 @@ static int vmw_bo_cpu_blit_line(struct vmw_bo_blit_line_data *d,
 		copy_size = min_t(u32, copy_size, PAGE_SIZE - src_page_offset);
 
 		if (unmap_src) {
-			ttm_kunmap_atomic_prot(d->src_addr, d->src_prot);
+			kunmap_atomic(d->src_addr);
 			d->src_addr = NULL;
 		}
 
 		if (unmap_dst) {
-			ttm_kunmap_atomic_prot(d->dst_addr, d->dst_prot);
+			kunmap_atomic(d->dst_addr);
 			d->dst_addr = NULL;
 		}
 
@@ -388,8 +388,8 @@ static int vmw_bo_cpu_blit_line(struct vmw_bo_blit_line_data *d,
 				return -EINVAL;
 
 			d->dst_addr -				ttm_kmap_atomic_prot(d->dst_pages[dst_page],
-						     d->dst_prot);
+				kmap_atomic_prot(d->dst_pages[dst_page],
+						 d->dst_prot);
 			if (!d->dst_addr)
 				return -ENOMEM;
 
@@ -401,8 +401,8 @@ static int vmw_bo_cpu_blit_line(struct vmw_bo_blit_line_data *d,
 				return -EINVAL;
 
 			d->src_addr -				ttm_kmap_atomic_prot(d->src_pages[src_page],
-						     d->src_prot);
+				kmap_atomic_prot(d->src_pages[src_page],
+						 d->src_prot);
 			if (!d->src_addr)
 				return -ENOMEM;
 
@@ -499,9 +499,9 @@ int vmw_bo_cpu_blit(struct ttm_buffer_object *dst,
 	}
 out:
 	if (d.src_addr)
-		ttm_kunmap_atomic_prot(d.src_addr, d.src_prot);
+		kunmap_atomic(d.src_addr);
 	if (d.dst_addr)
-		ttm_kunmap_atomic_prot(d.dst_addr, d.dst_prot);
+		kunmap_atomic(d.dst_addr);
 
 	return ret;
 }
include/drm/ttm/ttm_bo_api.h +0 -4
index 0a9d042e075a..de1ccdcd5703 100644
@@ -668,10 +668,6 @@ int ttm_bo_mmap_obj(struct vm_area_struct *vma, struct ttm_buffer_object *bo);
 int ttm_bo_mmap(struct file *filp, struct vm_area_struct *vma,
 		struct ttm_bo_device *bdev);
 
-void *ttm_kmap_atomic_prot(struct page *page, pgprot_t prot);
-
-void ttm_kunmap_atomic_prot(void *addr, pgprot_t prot);
-
 /**
  * ttm_bo_io
  *
Signature · 1 line
2.25.1
#52 lore raw

PATCH v3 12/15 kmap: Remove kmap_atomic_to_page()

In reply to [email protected]

From: Ira Weiny <[email protected]>

kmap_atomic_to_page() has no callers and is only defined on 1 arch and declared on another. Remove it.

---
Changes from V2:
New Patch for this series

---
 arch/csky/include/asm/highmem.h  |  1 -
 arch/csky/mm/highmem.c           | 13 -------------
 arch/nds32/include/asm/highmem.h |  1 -
 3 files changed, 15 deletions(-)
arch/csky/include/asm/highmem.h +0 -1
index 263fbddcd0a3..ea2f3f39174d 100644
@@ -33,7 +33,6 @@ extern pte_t *pkmap_page_table;
 #define ARCH_HAS_KMAP_FLUSH_TLB
 extern void kmap_flush_tlb(unsigned long addr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps() do {} while (0)
 
arch/csky/mm/highmem.c +0 -13
index 3ae5c8cd7619..3b3f622f5ae9 100644
@@ -81,19 +81,6 @@ void *kmap_atomic_pfn(unsigned long pfn)
 	return (void *) vaddr;
 }
 
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long)ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
 static void __init kmap_pages_init(void)
 {
 	unsigned long vaddr;
arch/nds32/include/asm/highmem.h +0 -1
index 4d21308549c9..a48a6536d41a 100644
@@ -52,7 +52,6 @@ extern void kmap_init(void);
  */
 #ifdef CONFIG_HIGHMEM
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(void *ptr);
 #endif
 
 #endif
Signature · 1 line
2.25.1
#53 lore raw

PATCH v3 13/15 parisc/kmap: Remove duplicate kmap code

In reply to [email protected]

From: Ira Weiny <[email protected]>

parisc reimplements the kmap calls except to flush it's dcache. This is arguably an abuse of kmap but regardless it is messy and confusing.

Remove the duplicate code and have parisc define ARCH_HAS_FLUSH_ON_KUNMAP for a kunmap_flush_on_unmap() architecture specific call to flush the cache.

---
Changes from V2:
New Patch for this series

---
 arch/parisc/include/asm/cacheflush.h | 28 ++--------------------------
 include/linux/highmem.h              | 10 +++++++---
 2 files changed, 9 insertions(+), 29 deletions(-)
arch/parisc/include/asm/cacheflush.h +2 -26
index 119c9a7681bc..99663fc1f997 100644
@@ -100,35 +100,11 @@ flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vma
 	}
 }
 
-#include <asm/kmap_types.h>
-
-#define ARCH_HAS_KMAP
-
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	return page_address(page);
-}
-
-static inline void kunmap(struct page *page)
-{
-	flush_kernel_dcache_page_addr(page_address(page));
-}
-
-static inline void *kmap_atomic(struct page *page)
-{
-	preempt_disable();
-	pagefault_disable();
-	return page_address(page);
-}
-
-static inline void kunmap_atomic_high(void *addr)
+#define ARCH_HAS_FLUSH_ON_KUNMAP
+static inline void kunmap_flush_on_unmap(void *addr)
 {
 	flush_kernel_dcache_page_addr(addr);
 }
 
-#define kmap_atomic_prot(page, prot)	kmap_atomic(page)
-#define kmap_atomic_pfn(pfn)	kmap_atomic(pfn_to_page(pfn))
-
 #endif /* _PARISC_CACHEFLUSH_H */
 
include/linux/highmem.h +7 -3
index 89838306f50d..cc0c3904e501 100644
@@ -129,7 +129,6 @@ static inline struct page *kmap_to_page(void *addr)
 
 static inline unsigned long totalhigh_pages(void) { return 0UL; }
 
-#ifndef ARCH_HAS_KMAP
 static inline void *kmap(struct page *page)
 {
 	might_sleep();
@@ -138,6 +137,9 @@ static inline void *kmap(struct page *page)
 
 static inline void kunmap(struct page *page)
 {
+#ifdef ARCH_HAS_FLUSH_ON_KUNMAP
+	kunmap_flush_on_unmap(page_address(page));
+#endif
 }
 
 static inline void *kmap_atomic(struct page *page)
@@ -150,14 +152,16 @@ static inline void *kmap_atomic(struct page *page)
 
 static inline void kunmap_atomic_high(void *addr)
 {
-	/* Nothing to do in the CONFIG_HIGHMEM=n case as kunmap_atomic()
+	/* Mostly nothing to do in the CONFIG_HIGHMEM=n case as kunmap_atomic()
 	 * handles re-enabling faults + preemption */
+#ifdef ARCH_HAS_FLUSH_ON_KUNMAP
+	kunmap_flush_on_unmap(addr);
+#endif
 }
 
 #define kmap_atomic_pfn(pfn)	kmap_atomic(pfn_to_page(pfn))
 
 #define kmap_flush_unused()	do {} while(0)
-#endif
 
 #endif /* CONFIG_HIGHMEM */
 
Signature · 1 line
2.25.1
maintainer
#54 lore raw

Re: [PATCH V3 13/15] parisc/kmap: Remove duplicate kmap code

Quoted 6 lines · On Thu, 7 May 2020 08:00:01 -0700 [email protected] wrote:

parisc reimplements the kmap calls except to flush it's dcache. This is arguably an abuse of kmap but regardless it is messy and confusing.

Remove the duplicate code and have parisc define ARCH_HAS_FLUSH_ON_KUNMAP for a kunmap_flush_on_unmap() architecture specific call to flush the cache.

checkpatch says:

ERROR: #define of 'ARCH_HAS_FLUSH_ON_KUNMAP' is wrong - use Kconfig variables or standard guards instead #69: FILE: arch/parisc/include/asm/cacheflush.h:103:
+#define ARCH_HAS_FLUSH_ON_KUNMAP

which is fair enough, I guess. More conventional would be

arch/parisc/include/asm/cacheflush.h:

static inline void kunmap_flush_on_unmap(void *addr)

{
	...
}

#define kunmap_flush_on_unmap kunmap_flush_on_unmap

include/linux/highmem.h:

#ifndef kunmap_flush_on_unmap
static inline void kunmap_flush_on_unmap(void *addr) {
}
#define kunmap_flush_on_unmap kunmap_flush_on_unmap #endif

static inline void kunmap_atomic_high(void *addr)

{
	/* Mostly nothing to do in the CONFIG_HIGHMEM=n case as kunmap_atomic()
	 * handles re-enabling faults + preemption */
	kunmap_flush_on_unmap(addr);
}

but I don't really think it's worth bothering changing it.

(Ditto patch 3/15)

author
#55 lore raw

Re: [PATCH V3 13/15] parisc/kmap: Remove duplicate kmap code

Quoted 44 lines · Andrew Morton
Quoted 6 lines · On Thu, 7 May 2020 08:00:01 -0700 [email protected] wrote:

parisc reimplements the kmap calls except to flush it's dcache. This is arguably an abuse of kmap but regardless it is messy and confusing.

Remove the duplicate code and have parisc define ARCH_HAS_FLUSH_ON_KUNMAP for a kunmap_flush_on_unmap() architecture specific call to flush the cache.

checkpatch says:

ERROR: #define of 'ARCH_HAS_FLUSH_ON_KUNMAP' is wrong - use Kconfig variables or standard guards instead #69: FILE: arch/parisc/include/asm/cacheflush.h:103:
+#define ARCH_HAS_FLUSH_ON_KUNMAP

which is fair enough, I guess. More conventional would be

arch/parisc/include/asm/cacheflush.h:

static inline void kunmap_flush_on_unmap(void *addr)

{
	...
}

#define kunmap_flush_on_unmap kunmap_flush_on_unmap

include/linux/highmem.h:

#ifndef kunmap_flush_on_unmap
static inline void kunmap_flush_on_unmap(void *addr) {
}
#define kunmap_flush_on_unmap kunmap_flush_on_unmap #endif

static inline void kunmap_atomic_high(void *addr)

{
	/* Mostly nothing to do in the CONFIG_HIGHMEM=n case as kunmap_atomic()
	 * handles re-enabling faults + preemption */
	kunmap_flush_on_unmap(addr);
}
Quoted 3 lines

but I don't really think it's worth bothering changing it.

(Ditto patch 3/15)

Yes I was following the pattern already there.

I'll fix up the last patch now.
Ira

#56 lore raw

PATCH v3 14/15 sparc: Remove unnecessary includes

In reply to [email protected]

From: Ira Weiny <[email protected]>

linux/highmem.h has not been needed for the pte_offset_map => kmap_atomic use in sparc for some time (~2002)

Remove this include.

---
Changes from V2:
New Patch for this series

---
 arch/sparc/mm/io-unit.c | 1 -
 arch/sparc/mm/iommu.c   | 1 -
 2 files changed, 2 deletions(-)
arch/sparc/mm/io-unit.c +0 -1
index 289276b99b01..08238d989cfd 100644
@@ -10,7 +10,6 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
-#include <linux/highmem.h>	/* pte_offset_map => kmap_atomic */
 #include <linux/bitops.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
arch/sparc/mm/iommu.c +0 -1
index b00dde13681b..f1e08e30b64e 100644
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/highmem.h>	/* pte_offset_map => kmap_atomic */
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
Signature · 1 line
2.25.1
#57 lore raw

PATCH v3 15/15 kmap: Consolidate kmap_prot definitions

In reply to [email protected]

From: Ira Weiny <[email protected]>

Most architectures define kmap_prot to be PAGE_KERNEL.

Let sparc and xtensa define there own and define PAGE_KERNEL as the default if not overridden.

---
Changes from V2:
New Patch for this series

---
 arch/arc/include/asm/highmem.h        | 3 ---
 arch/arm/include/asm/highmem.h        | 2 --
 arch/csky/include/asm/highmem.h       | 2 --
 arch/microblaze/include/asm/highmem.h | 1 -
 arch/mips/include/asm/highmem.h       | 2 --
 arch/nds32/include/asm/highmem.h      | 1 -
 arch/powerpc/include/asm/highmem.h    | 1 -
 arch/sparc/include/asm/highmem.h      | 3 ++-
 arch/sparc/mm/highmem.c               | 4 ----
 arch/x86/include/asm/fixmap.h         | 1 -
 include/linux/highmem.h               | 4 ++++
 11 files changed, 6 insertions(+), 18 deletions(-)
arch/arc/include/asm/highmem.h +0 -3
index 70900a73bfc8..6e5eafb3afdd 100644
@@ -25,9 +25,6 @@
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 #define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
 
-#define kmap_prot		PAGE_KERNEL
-
-
 #include <asm/cacheflush.h>
 
 extern void kmap_init(void);
arch/arm/include/asm/highmem.h +0 -2
index b0d4bd8dc3c1..31811be38d78 100644
@@ -10,8 +10,6 @@
 #define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-#define kmap_prot		PAGE_KERNEL
-
 #define flush_cache_kmaps() \
 	do { \
 		if (cache_is_vivt()) \
arch/csky/include/asm/highmem.h +0 -2
index ea2f3f39174d..14645e3d5cd5 100644
@@ -38,8 +38,6 @@ extern void *kmap_atomic_pfn(unsigned long pfn);
 
 extern void kmap_init(void);
 
-#define kmap_prot PAGE_KERNEL
-
 #endif /* __KERNEL__ */
 
 #endif /* __ASM_CSKY_HIGHMEM_H */
arch/microblaze/include/asm/highmem.h +0 -1
index d7c55cfd27bd..284ca8fb54c1 100644
@@ -25,7 +25,6 @@
 #include <linux/uaccess.h>
 #include <asm/fixmap.h>
 
-#define kmap_prot		PAGE_KERNEL
 extern pte_t *kmap_pte;
 extern pte_t *pkmap_page_table;
 
arch/mips/include/asm/highmem.h +0 -2
index 76dec0bd4f59..f1f788b57166 100644
@@ -54,8 +54,6 @@ extern void *kmap_atomic_pfn(unsigned long pfn);
 
 extern void kmap_init(void);
 
-#define kmap_prot PAGE_KERNEL
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */
arch/nds32/include/asm/highmem.h +0 -1
index a48a6536d41a..5717647d14d1 100644
@@ -32,7 +32,6 @@
 #define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
 #define PKMAP_NR(virt)		(((virt) - (PKMAP_BASE)) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
-#define kmap_prot		PAGE_KERNEL
 
 static inline void flush_cache_kmaps(void)
 {
arch/powerpc/include/asm/highmem.h +0 -1
index 8d8ee3fcd800..104026f7d6bc 100644
@@ -29,7 +29,6 @@
 #include <asm/page.h>
 #include <asm/fixmap.h>
 
-#define kmap_prot		PAGE_KERNEL
 extern pte_t *kmap_pte;
 extern pte_t *pkmap_page_table;
 
arch/sparc/include/asm/highmem.h +2 -1
index f4babe67cb5d..37f8694bde84 100644
@@ -25,11 +25,12 @@
 #include <asm/vaddrs.h>
 #include <asm/kmap_types.h>
 #include <asm/pgtable.h>
+#include <asm/pgtsrmmu.h>
 
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pgprot_t kmap_prot;
+#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
 extern pte_t *pkmap_page_table;
 
 void kmap_init(void) __init;
arch/sparc/mm/highmem.c +0 -4
index 414f578d1e57..d237d902f9c3 100644
@@ -32,9 +32,6 @@
 #include <asm/pgalloc.h>
 #include <asm/vaddrs.h>
 
-pgprot_t kmap_prot;
-EXPORT_SYMBOL(kmap_prot);
-
 static pte_t *kmap_pte;
 
 void __init kmap_init(void)
@@ -51,7 +48,6 @@ void __init kmap_init(void)
 
         /* cache the first kmap pte */
         kmap_pte = pte_offset_kernel(dir, address);
-        kmap_prot = __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
 }
 
 void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
arch/x86/include/asm/fixmap.h +0 -1
index 28183ee3cc42..b9527a54db99 100644
@@ -152,7 +152,6 @@ extern void reserve_top_address(unsigned long reserve);
 extern int fixmaps_set;
 
 extern pte_t *kmap_pte;
-#define kmap_prot PAGE_KERNEL
 extern pte_t *pkmap_page_table;
 
 void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
include/linux/highmem.h +4 -0
index cc0c3904e501..bf470c16cecb 100644
@@ -40,6 +40,10 @@ extern void kunmap_atomic_high(void *kvaddr);
 static inline void kmap_flush_tlb(unsigned long addr) { }
 #endif
 
+#ifndef kmap_prot
+#define kmap_prot PAGE_KERNEL
+#endif
+
 void *kmap_high(struct page *page);
 static inline void *kmap(struct page *page)
 {
Signature · 1 line
2.25.1
maintainer
#58 lore raw

Re: [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions

Quoted 7 lines · On Thu, 7 May 2020 08:00:03 -0700 [email protected] wrote:

From: Ira Weiny <[email protected]>

Most architectures define kmap_prot to be PAGE_KERNEL.

Let sparc and xtensa define there own and define PAGE_KERNEL as the default if not overridden.

checkpatch considered useful ;)

From: Andrew Morton <[email protected]>
Subject: kmap-consolidate-kmap_prot-definitions-checkpatch-fixes

WARNING: macros should not use a trailing semicolon
#134: FILE: arch/sparc/include/asm/highmem.h:33:
+#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);

total: 0 errors, 1 warnings, 100 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

./patches/kmap-consolidate-kmap_prot-definitions.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

---

 arch/sparc/include/asm/highmem.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/sparc/include/asm/highmem.h renamed from arch/sparc/include/asm/highmem.h~kmap-consolidate-kmap_prot-definitions-checkpatch-fixes +1 -1
@@ -30,7 +30,7 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
+#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE)
 extern pte_t *pkmap_page_table;
 
 void kmap_init(void) __init;

_

author
#59 lore raw

Re: [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions

Quoted 11 lines · Andrew Morton
Quoted 7 lines · On Thu, 7 May 2020 08:00:03 -0700 [email protected] wrote:

From: Ira Weiny <[email protected]>

Most architectures define kmap_prot to be PAGE_KERNEL.

Let sparc and xtensa define there own and define PAGE_KERNEL as the default if not overridden.

checkpatch considered useful ;)

Yes sorry... V3.1 on it's way...

Ira

Quoted 41 lines

From: Andrew Morton <[email protected]>
Subject: kmap-consolidate-kmap_prot-definitions-checkpatch-fixes

WARNING: macros should not use a trailing semicolon
#134: FILE: arch/sparc/include/asm/highmem.h:33:
+#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);

total: 0 errors, 1 warnings, 100 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

./patches/kmap-consolidate-kmap_prot-definitions.patch has style problems, please review.

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

---

 arch/sparc/include/asm/highmem.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/sparc/include/asm/highmem.h renamed from arch/sparc/include/asm/highmem.h~kmap-consolidate-kmap_prot-definitions-checkpatch-fixes +1 -1
@@ -30,7 +30,7 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
+#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE)
 extern pte_t *pkmap_page_table;
 
 void kmap_init(void) __init;

_

#60 lore raw

PATCH 1/1 kmap: Consolidate kmap_prot definitions

In reply to [email protected]

From: Ira Weiny <[email protected]>

Most architectures define kmap_prot to be PAGE_KERNEL.

Let sparc and xtensa define there own and define PAGE_KERNEL as the default if not overridden.

---
Changes from V3:
Fix semicolon in macro

Changes from V2:
New Patch for this series

---
 arch/arc/include/asm/highmem.h        | 3 ---
 arch/arm/include/asm/highmem.h        | 2 --
 arch/csky/include/asm/highmem.h       | 2 --
 arch/microblaze/include/asm/highmem.h | 1 -
 arch/mips/include/asm/highmem.h       | 2 --
 arch/nds32/include/asm/highmem.h      | 1 -
 arch/powerpc/include/asm/highmem.h    | 1 -
 arch/sparc/include/asm/highmem.h      | 3 ++-
 arch/sparc/mm/highmem.c               | 4 ----
 arch/x86/include/asm/fixmap.h         | 1 -
 include/linux/highmem.h               | 4 ++++
 11 files changed, 6 insertions(+), 18 deletions(-)
arch/arc/include/asm/highmem.h +0 -3
index 70900a73bfc8..6e5eafb3afdd 100644
@@ -25,9 +25,6 @@
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 #define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
 
-#define kmap_prot		PAGE_KERNEL
-
-
 #include <asm/cacheflush.h>
 
 extern void kmap_init(void);
arch/arm/include/asm/highmem.h +0 -2
index b0d4bd8dc3c1..31811be38d78 100644
@@ -10,8 +10,6 @@
 #define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 
-#define kmap_prot		PAGE_KERNEL
-
 #define flush_cache_kmaps() \
 	do { \
 		if (cache_is_vivt()) \
arch/csky/include/asm/highmem.h +0 -2
index ea2f3f39174d..14645e3d5cd5 100644
@@ -38,8 +38,6 @@ extern void *kmap_atomic_pfn(unsigned long pfn);
 
 extern void kmap_init(void);
 
-#define kmap_prot PAGE_KERNEL
-
 #endif /* __KERNEL__ */
 
 #endif /* __ASM_CSKY_HIGHMEM_H */
arch/microblaze/include/asm/highmem.h +0 -1
index d7c55cfd27bd..284ca8fb54c1 100644
@@ -25,7 +25,6 @@
 #include <linux/uaccess.h>
 #include <asm/fixmap.h>
 
-#define kmap_prot		PAGE_KERNEL
 extern pte_t *kmap_pte;
 extern pte_t *pkmap_page_table;
 
arch/mips/include/asm/highmem.h +0 -2
index 76dec0bd4f59..f1f788b57166 100644
@@ -54,8 +54,6 @@ extern void *kmap_atomic_pfn(unsigned long pfn);
 
 extern void kmap_init(void);
 
-#define kmap_prot PAGE_KERNEL
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */
arch/nds32/include/asm/highmem.h +0 -1
index a48a6536d41a..5717647d14d1 100644
@@ -32,7 +32,6 @@
 #define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
 #define PKMAP_NR(virt)		(((virt) - (PKMAP_BASE)) >> PAGE_SHIFT)
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
-#define kmap_prot		PAGE_KERNEL
 
 static inline void flush_cache_kmaps(void)
 {
arch/powerpc/include/asm/highmem.h +0 -1
index 8d8ee3fcd800..104026f7d6bc 100644
@@ -29,7 +29,6 @@
 #include <asm/page.h>
 #include <asm/fixmap.h>
 
-#define kmap_prot		PAGE_KERNEL
 extern pte_t *kmap_pte;
 extern pte_t *pkmap_page_table;
 
arch/sparc/include/asm/highmem.h +2 -1
index f4babe67cb5d..ddb03c04f1f3 100644
@@ -25,11 +25,12 @@
 #include <asm/vaddrs.h>
 #include <asm/kmap_types.h>
 #include <asm/pgtable.h>
+#include <asm/pgtsrmmu.h>
 
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pgprot_t kmap_prot;
+#define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE)
 extern pte_t *pkmap_page_table;
 
 void kmap_init(void) __init;
arch/sparc/mm/highmem.c +0 -4
index 414f578d1e57..d237d902f9c3 100644
@@ -32,9 +32,6 @@
 #include <asm/pgalloc.h>
 #include <asm/vaddrs.h>
 
-pgprot_t kmap_prot;
-EXPORT_SYMBOL(kmap_prot);
-
 static pte_t *kmap_pte;
 
 void __init kmap_init(void)
@@ -51,7 +48,6 @@ void __init kmap_init(void)
 
         /* cache the first kmap pte */
         kmap_pte = pte_offset_kernel(dir, address);
-        kmap_prot = __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
 }
 
 void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
arch/x86/include/asm/fixmap.h +0 -1
index 28183ee3cc42..b9527a54db99 100644
@@ -152,7 +152,6 @@ extern void reserve_top_address(unsigned long reserve);
 extern int fixmaps_set;
 
 extern pte_t *kmap_pte;
-#define kmap_prot PAGE_KERNEL
 extern pte_t *pkmap_page_table;
 
 void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
include/linux/highmem.h +4 -0
index cc0c3904e501..bf470c16cecb 100644
@@ -40,6 +40,10 @@ extern void kunmap_atomic_high(void *kvaddr);
 static inline void kmap_flush_tlb(unsigned long addr) { }
 #endif
 
+#ifndef kmap_prot
+#define kmap_prot PAGE_KERNEL
+#endif
+
 void *kmap_high(struct page *page);
 static inline void *kmap(struct page *page)
 {
Signature · 1 line
2.25.1
#61 lore raw

Re: [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions

In reply to [email protected]
I love your patch! Perhaps something to improve:

Hi,

I love your patch! Perhaps something to improve:

[auto build test WARNING on powerpc/next]
[also build test WARNING on sparc/master linus/master v5.7-rc4] [cannot apply to sparc-next/master next-20200508]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/ira-weiny-intel-com/Remove-duplicated-kmap-code/20200508-044226
base:   https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
config: sparc-randconfig-r022-20200508 (attached as .config)
compiler: sparc-linux-gcc (GCC) 9.3.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=sparc

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

In file included from include/linux/highmem.h:37,
from include/linux/pagemap.h:11,
from include/linux/blkdev.h:16,
from include/linux/blk-mq.h:5,
from include/scsi/scsi_host.h:11,
from include/linux/libata.h:21,
from drivers/ata/libata-sff.c:19:
include/linux/highmem.h: In function 'clear_user_highpage':
arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token

      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:222:15: note: in expansion of macro 'kmap_atomic'
     222 |  void *addr = kmap_atomic(page);
         |               ^~~~~~~~~~~
   include/linux/highmem.h: In function 'clear_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:275:16: note: in expansion of macro 'kmap_atomic'
     275 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'zero_user_segments':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:284:16: note: in expansion of macro 'kmap_atomic'
     284 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:317:10: note: in expansion of macro 'kmap_atomic'
     317 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:318:8: note: in expansion of macro 'kmap_atomic'
     318 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:332:10: note: in expansion of macro 'kmap_atomic'
     332 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:333:8: note: in expansion of macro 'kmap_atomic'
     333 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/bio.h: In function 'bvec_kmap_irq':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/bio.h:528:25: note: in expansion of macro 'kmap_atomic'
     528 |  addr = (unsigned long) kmap_atomic(bvec->bv_page);
         |                         ^~~~~~~~~~~
   drivers/ata/libata-sff.c: In function 'ata_pio_sector':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
>> drivers/ata/libata-sff.c:674:8: note: in expansion of macro 'kmap_atomic'
     674 |  buf = kmap_atomic(page);
         |        ^~~~~~~~~~~
   drivers/ata/libata-sff.c: In function '__atapi_pio_bytes':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   drivers/ata/libata-sff.c:807:8: note: in expansion of macro 'kmap_atomic'
     807 |  buf = kmap_atomic(page);
         |        ^~~~~~~~~~~

--
In file included from include/linux/highmem.h:37,
from include/linux/pagemap.h:11,
from drivers/media/pci/ivtv/ivtv-driver.h:52, from drivers/media/pci/ivtv/ivtv-udma.c:11:
include/linux/highmem.h: In function 'clear_user_highpage':
arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token

      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:222:15: note: in expansion of macro 'kmap_atomic'
     222 |  void *addr = kmap_atomic(page);
         |               ^~~~~~~~~~~
   include/linux/highmem.h: In function 'clear_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:275:16: note: in expansion of macro 'kmap_atomic'
     275 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'zero_user_segments':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:284:16: note: in expansion of macro 'kmap_atomic'
     284 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:317:10: note: in expansion of macro 'kmap_atomic'
     317 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:318:8: note: in expansion of macro 'kmap_atomic'
     318 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:332:10: note: in expansion of macro 'kmap_atomic'
     332 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:333:8: note: in expansion of macro 'kmap_atomic'
     333 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   drivers/media/pci/ivtv/ivtv-udma.c: In function 'ivtv_udma_fill_sg_list':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
>> drivers/media/pci/ivtv/ivtv-udma.c:48:10: note: in expansion of macro 'kmap_atomic'
      48 |    src = kmap_atomic(dma->map[map_offset]) + offset;
         |          ^~~~~~~~~~~

vim +/kmap_atomic +674 drivers/ata/libata-sff.c

871af1210f1396 Alan Cox                  2009-01-05  639  
624d5c514eed18 Tejun Heo                 2008-03-25  640  /**
624d5c514eed18 Tejun Heo                 2008-03-25  641   *	ata_pio_sector - Transfer a sector of data.
624d5c514eed18 Tejun Heo                 2008-03-25  642   *	@qc: Command on going
624d5c514eed18 Tejun Heo                 2008-03-25  643   *
624d5c514eed18 Tejun Heo                 2008-03-25  644   *	Transfer qc->sect_size bytes of data from/to the ATA device.
624d5c514eed18 Tejun Heo                 2008-03-25  645   *
624d5c514eed18 Tejun Heo                 2008-03-25  646   *	LOCKING:
624d5c514eed18 Tejun Heo                 2008-03-25  647   *	Inherited from caller.
624d5c514eed18 Tejun Heo                 2008-03-25  648   */
624d5c514eed18 Tejun Heo                 2008-03-25  649  static void ata_pio_sector(struct ata_queued_cmd *qc)
624d5c514eed18 Tejun Heo                 2008-03-25  650  {
624d5c514eed18 Tejun Heo                 2008-03-25  651  	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
624d5c514eed18 Tejun Heo                 2008-03-25  652  	struct ata_port *ap = qc->ap;
624d5c514eed18 Tejun Heo                 2008-03-25  653  	struct page *page;
624d5c514eed18 Tejun Heo                 2008-03-25  654  	unsigned int offset;
624d5c514eed18 Tejun Heo                 2008-03-25  655  	unsigned char *buf;
624d5c514eed18 Tejun Heo                 2008-03-25  656  
752ead44491e8c Jens Axboe                2019-08-07  657  	if (!qc->cursg) {
752ead44491e8c Jens Axboe                2019-08-07  658  		qc->curbytes = qc->nbytes;
752ead44491e8c Jens Axboe                2019-08-07  659  		return;
752ead44491e8c Jens Axboe                2019-08-07  660  	}
624d5c514eed18 Tejun Heo                 2008-03-25  661  	if (qc->curbytes == qc->nbytes - qc->sect_size)
624d5c514eed18 Tejun Heo                 2008-03-25  662  		ap->hsm_task_state = HSM_ST_LAST;
624d5c514eed18 Tejun Heo                 2008-03-25  663  
624d5c514eed18 Tejun Heo                 2008-03-25  664  	page = sg_page(qc->cursg);
624d5c514eed18 Tejun Heo                 2008-03-25  665  	offset = qc->cursg->offset + qc->cursg_ofs;
624d5c514eed18 Tejun Heo                 2008-03-25  666  
624d5c514eed18 Tejun Heo                 2008-03-25  667  	/* get the current page and offset */
624d5c514eed18 Tejun Heo                 2008-03-25  668  	page = nth_page(page, (offset >> PAGE_SHIFT));
624d5c514eed18 Tejun Heo                 2008-03-25  669  	offset %= PAGE_SIZE;
624d5c514eed18 Tejun Heo                 2008-03-25  670  
624d5c514eed18 Tejun Heo                 2008-03-25  671  	DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
624d5c514eed18 Tejun Heo                 2008-03-25  672  
624d5c514eed18 Tejun Heo                 2008-03-25  673  	/* do the actual data transfer */
5d7a288caf6d9b Tycho Andersen            2017-05-04 @674  	buf = kmap_atomic(page);
5d7a288caf6d9b Tycho Andersen            2017-05-04  675  	ap->ops->sff_data_xfer(qc, buf + offset, qc->sect_size, do_write);
496cda8e75d903 Cong Wang                 2011-11-25  676  	kunmap_atomic(buf);
624d5c514eed18 Tejun Heo                 2008-03-25  677  
3842e835490cdf Sebastian Andrzej Siewior 2010-03-21  678  	if (!do_write && !PageSlab(page))
2d68b7fe55d9e1 Catalin Marinas           2010-02-04  679  		flush_dcache_page(page);
2d68b7fe55d9e1 Catalin Marinas           2010-02-04  680  
624d5c514eed18 Tejun Heo                 2008-03-25  681  	qc->curbytes += qc->sect_size;
624d5c514eed18 Tejun Heo                 2008-03-25  682  	qc->cursg_ofs += qc->sect_size;
624d5c514eed18 Tejun Heo                 2008-03-25  683  
624d5c514eed18 Tejun Heo                 2008-03-25  684  	if (qc->cursg_ofs == qc->cursg->length) {
624d5c514eed18 Tejun Heo                 2008-03-25  685  		qc->cursg = sg_next(qc->cursg);
752ead44491e8c Jens Axboe                2019-08-07  686  		if (!qc->cursg)
752ead44491e8c Jens Axboe                2019-08-07  687  			ap->hsm_task_state = HSM_ST_LAST;
624d5c514eed18 Tejun Heo                 2008-03-25  688  		qc->cursg_ofs = 0;
624d5c514eed18 Tejun Heo                 2008-03-25  689  	}
624d5c514eed18 Tejun Heo                 2008-03-25  690  }
624d5c514eed18 Tejun Heo                 2008-03-25  691  

:::::: The code at line 674 was first introduced by commit
:::::: 5d7a288caf6d9b839a9a5bd28e56e15678669e67 ata-sff: always map page before data transfer

:::::: TO: Tycho Andersen <[email protected]>
:::::: CC: Tejun Heo <[email protected]>

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

#62 lore raw

Re: [PATCH V3 15/15] kmap: Consolidate kmap_prot definitions

In reply to [email protected]
I love your patch! Perhaps something to improve:

Hi,

I love your patch! Perhaps something to improve:

[auto build test WARNING on powerpc/next]
[also build test WARNING on sparc/master linus/master v5.7-rc4] [cannot apply to next-20200508]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/ira-weiny-intel-com/Remove-duplicated-kmap-code/20200508-044226
base:   https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
config: sparc-randconfig-r001-20200508 (attached as .config)
compiler: sparc-linux-gcc (GCC) 9.3.0

reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=sparc

If you fix the issue, kindly add following tag as appropriate

All warnings (new ones prefixed by >>):

In file included from include/linux/highmem.h:37,
from include/linux/pagemap.h:11,
from drivers/char/virtio_console.c:15:
include/linux/highmem.h: In function 'clear_user_highpage':
arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token

      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:222:15: note: in expansion of macro 'kmap_atomic'
     222 |  void *addr = kmap_atomic(page);
         |               ^~~~~~~~~~~
   include/linux/highmem.h: In function 'clear_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:275:16: note: in expansion of macro 'kmap_atomic'
     275 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'zero_user_segments':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:284:16: note: in expansion of macro 'kmap_atomic'
     284 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:317:10: note: in expansion of macro 'kmap_atomic'
     317 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:318:8: note: in expansion of macro 'kmap_atomic'
     318 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:332:10: note: in expansion of macro 'kmap_atomic'
     332 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:333:8: note: in expansion of macro 'kmap_atomic'
     333 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   drivers/char/virtio_console.c: In function 'pipe_to_sg':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
>> drivers/char/virtio_console.c:895:9: note: in expansion of macro 'kmap_atomic'
     895 |   src = kmap_atomic(buf->page);
         |         ^~~~~~~~~~~
--
   In file included from include/linux/highmem.h:37,
                    from include/linux/pagemap.h:11,
                    from include/linux/blkdev.h:16,
                    from include/linux/dm-bufio.h:12,
                    from drivers/md/dm-verity.h:14,
                    from drivers/md/dm-verity-target.c:16:
   include/linux/highmem.h: In function 'clear_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:222:15: note: in expansion of macro 'kmap_atomic'
     222 |  void *addr = kmap_atomic(page);
         |               ^~~~~~~~~~~
   include/linux/highmem.h: In function 'clear_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:275:16: note: in expansion of macro 'kmap_atomic'
     275 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'zero_user_segments':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:284:16: note: in expansion of macro 'kmap_atomic'
     284 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:317:10: note: in expansion of macro 'kmap_atomic'
     317 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:318:8: note: in expansion of macro 'kmap_atomic'
     318 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:332:10: note: in expansion of macro 'kmap_atomic'
     332 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:333:8: note: in expansion of macro 'kmap_atomic'
     333 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/bio.h: In function 'bvec_kmap_irq':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/bio.h:528:25: note: in expansion of macro 'kmap_atomic'
     528 |  addr = (unsigned long) kmap_atomic(bvec->bv_page);
         |                         ^~~~~~~~~~~
   drivers/md/dm-verity-target.c: In function 'verity_for_bv_block':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
>> drivers/md/dm-verity-target.c:426:10: note: in expansion of macro 'kmap_atomic'
     426 |   page = kmap_atomic(bv.bv_page);
         |          ^~~~~~~~~~~
--
   In file included from include/linux/highmem.h:37,
                    from include/linux/bio.h:8,
                    from drivers/md/dm-crypt.c:16:
   include/linux/highmem.h: In function 'clear_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:222:15: note: in expansion of macro 'kmap_atomic'
     222 |  void *addr = kmap_atomic(page);
         |               ^~~~~~~~~~~
   include/linux/highmem.h: In function 'clear_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:275:16: note: in expansion of macro 'kmap_atomic'
     275 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'zero_user_segments':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:284:16: note: in expansion of macro 'kmap_atomic'
     284 |  void *kaddr = kmap_atomic(page);
         |                ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_user_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:317:10: note: in expansion of macro 'kmap_atomic'
     317 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:318:8: note: in expansion of macro 'kmap_atomic'
     318 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/highmem.h: In function 'copy_highpage':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:332:10: note: in expansion of macro 'kmap_atomic'
     332 |  vfrom = kmap_atomic(from);
         |          ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/highmem.h:333:8: note: in expansion of macro 'kmap_atomic'
     333 |  vto = kmap_atomic(to);
         |        ^~~~~~~~~~~
   include/linux/bio.h: In function 'bvec_kmap_irq':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   include/linux/bio.h:528:25: note: in expansion of macro 'kmap_atomic'
     528 |  addr = (unsigned long) kmap_atomic(bvec->bv_page);
         |                         ^~~~~~~~~~~
   drivers/md/dm-crypt.c: In function 'crypt_iv_lmk_gen':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
>> drivers/md/dm-crypt.c:524:9: note: in expansion of macro 'kmap_atomic'
     524 |   src = kmap_atomic(sg_page(sg));
         |         ^~~~~~~~~~~
   drivers/md/dm-crypt.c: In function 'crypt_iv_lmk_post':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   drivers/md/dm-crypt.c:544:8: note: in expansion of macro 'kmap_atomic'
     544 |  dst = kmap_atomic(sg_page(sg));
         |        ^~~~~~~~~~~
   drivers/md/dm-crypt.c: In function 'crypt_iv_tcw_gen':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   drivers/md/dm-crypt.c:673:9: note: in expansion of macro 'kmap_atomic'
     673 |   src = kmap_atomic(sg_page(sg));
         |         ^~~~~~~~~~~
   drivers/md/dm-crypt.c: In function 'crypt_iv_tcw_post':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   drivers/md/dm-crypt.c:699:8: note: in expansion of macro 'kmap_atomic'
     699 |  dst = kmap_atomic(sg_page(sg));
         |        ^~~~~~~~~~~
   drivers/md/dm-crypt.c: In function 'crypt_iv_elephant':
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   drivers/md/dm-crypt.c:965:9: note: in expansion of macro 'kmap_atomic'
     965 |  data = kmap_atomic(sg_page(sg));
         |         ^~~~~~~~~~~
   arch/sparc/include/asm/highmem.h:33:68: error: expected ')' before ';' token
      33 | #define kmap_prot __pgprot(SRMMU_ET_PTE | SRMMU_PRIV | SRMMU_CACHE);
         |                                                                    ^
   include/linux/highmem.h:91:50: note: in expansion of macro 'kmap_prot'
      91 | #define kmap_atomic(page) kmap_atomic_prot(page, kmap_prot)
         |                                                  ^~~~~~~~~
   drivers/md/dm-crypt.c:971:11: note: in expansion of macro 'kmap_atomic'
     971 |   data2 = kmap_atomic(sg_page(sg2));
         |           ^~~~~~~~~~~

..

vim +/kmap_atomic +895 drivers/char/virtio_console.c

eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  863  
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  864  static int pipe_to_sg(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  865  			struct splice_desc *sd)
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  866  {
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  867  	struct sg_list *sgl = sd->u.data;
ec8fc870156b2b Masami Hiramatsu 2012-08-09  868  	unsigned int offset, len;
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  869  
8ca84a50e5b394 Masami Hiramatsu 2012-08-09  870  	if (sgl->n == sgl->size)
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  871  		return 0;
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  872  
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  873  	/* Try lock this page */
ca76f5b6bdbdc5 Miklos Szeredi   2016-09-27  874  	if (pipe_buf_steal(pipe, buf) == 0) {
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  875  		/* Get reference and unlock page for moving */
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  876  		get_page(buf->page);
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  877  		unlock_page(buf->page);
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  878  
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  879  		len = min(buf->len, sd->len);
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  880  		sg_set_page(&(sgl->sg[sgl->n]), buf->page, len, buf->offset);
ec8fc870156b2b Masami Hiramatsu 2012-08-09  881  	} else {
ec8fc870156b2b Masami Hiramatsu 2012-08-09  882  		/* Failback to copying a page */
ec8fc870156b2b Masami Hiramatsu 2012-08-09  883  		struct page *page = alloc_page(GFP_KERNEL);
c9efe51165fa0a Al Viro          2014-02-02  884  		char *src;
ec8fc870156b2b Masami Hiramatsu 2012-08-09  885  
ec8fc870156b2b Masami Hiramatsu 2012-08-09  886  		if (!page)
ec8fc870156b2b Masami Hiramatsu 2012-08-09  887  			return -ENOMEM;
ec8fc870156b2b Masami Hiramatsu 2012-08-09  888  
ec8fc870156b2b Masami Hiramatsu 2012-08-09  889  		offset = sd->pos & ~PAGE_MASK;
ec8fc870156b2b Masami Hiramatsu 2012-08-09  890  
ec8fc870156b2b Masami Hiramatsu 2012-08-09  891  		len = sd->len;
ec8fc870156b2b Masami Hiramatsu 2012-08-09  892  		if (len + offset > PAGE_SIZE)
ec8fc870156b2b Masami Hiramatsu 2012-08-09  893  			len = PAGE_SIZE - offset;
ec8fc870156b2b Masami Hiramatsu 2012-08-09  894  
fbb32750a62df7 Al Viro          2014-02-02 @895  		src = kmap_atomic(buf->page);
c9efe51165fa0a Al Viro          2014-02-02  896  		memcpy(page_address(page) + offset, src + buf->offset, len);
fbb32750a62df7 Al Viro          2014-02-02  897  		kunmap_atomic(src);
ec8fc870156b2b Masami Hiramatsu 2012-08-09  898  
ec8fc870156b2b Masami Hiramatsu 2012-08-09  899  		sg_set_page(&(sgl->sg[sgl->n]), page, len, offset);
ec8fc870156b2b Masami Hiramatsu 2012-08-09  900  	}
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  901  	sgl->n++;
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  902  	sgl->len += len;
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  903  
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  904  	return len;
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  905  }
eb5e89fc70bb3f Masami Hiramatsu 2012-08-09  906  

:::::: The code at line 895 was first introduced by commit
:::::: fbb32750a62df75d1ffea547f3908b21c5496d9f pipe: kill ->map() and ->unmap()

:::::: TO: Al Viro <[email protected]>
:::::: CC: Al Viro <[email protected]>

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org