Skip to contentSkip to conversation

ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

PATCH Superseded Marcin Sloniewski 3 participants 5 messages Jul 1, 2020 – Jul 28, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

This commit adds device tree files supporting
SBC from Seeed Studio based on STM32MP157C.

This works with generic stm32mp1 config.
Right now only booting from SD card is supported.

---

Changes in v4:
- removed unnecessary pull up on uart4 rx

Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order

Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot

 arch/arm/dts/Makefile                         |   1 +
 .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 134 +++++++
 arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
 arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
 5 files changed, 718 insertions(+)
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
arch/arm/dts/Makefile +1 -0
index 9900b44274..af94ed5aef 100644
@@ -917,6 +917,7 @@ dtb-$(CONFIG_STM32MP15x) += \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
 	stm32mp157c-ev1.dtb \
+	stm32mp157c-odyssey.dtb \
 	stm32mp15xx-dhcom-pdk2.dtb \
 	stm32mp15xx-dhcor-avenger96.dtb
 
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file +134 -0

134 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file +364 -0

364 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file +58 -0

58 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey.dts new file +161 -0

161 lines not on this page · raw message

Signature · 1 line
2.26.2
#1 lore raw

PATCH v5 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

This commit adds device tree files supporting
SBC from Seeed Studio based on STM32MP157C.

This works with generic stm32mp1 config.
Right now only booting from SD card is supported.

---

Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported

Changes in v4:
- removed unnecessary pull up on uart4 rx

Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order

Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot

 arch/arm/dts/Makefile                         |   1 +
 .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 125 ++++++
 arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
 arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
 5 files changed, 709 insertions(+)
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
arch/arm/dts/Makefile +1 -0
index d345e30f35..d9629aba7d 100644
@@ -931,6 +931,7 @@ dtb-$(CONFIG_STM32MP15x) += \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
 	stm32mp157c-ev1.dtb \
+	stm32mp157c-odyssey.dtb \
 	stm32mp15xx-dhcom-pdk2.dtb \
 	stm32mp15xx-dhcor-avenger96.dtb
 
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file +125 -0

125 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file +364 -0

364 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file +58 -0

58 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey.dts new file +161 -0

161 lines not on this page · raw message

Signature · 1 line
2.26.2
#2 lore raw

PATCH v6 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

This commit adds device tree files supporting
SBC from Seeed Studio based on STM32MP157C.

This works with generic stm32mp1 config.
Right now only booting from SD card is supported.

---

Changes in v6:
- forgot to add changes in v5 ;(

Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported

Changes in v4:
- removed unnecessary pull up on uart4 rx

Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order

Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot

 arch/arm/dts/Makefile                         |   1 +
 .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 125 ++++++
 arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
 arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
 5 files changed, 709 insertions(+)
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
arch/arm/dts/Makefile +1 -0
index d345e30f35..d9629aba7d 100644
@@ -931,6 +931,7 @@ dtb-$(CONFIG_STM32MP15x) += \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
 	stm32mp157c-ev1.dtb \
+	stm32mp157c-odyssey.dtb \
 	stm32mp15xx-dhcom-pdk2.dtb \
 	stm32mp15xx-dhcor-avenger96.dtb
 
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file +125 -0

125 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file +364 -0

364 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file +58 -0

58 lines not on this page · raw message

arch/arm/dts/stm32mp157c-odyssey.dts new file +161 -0

161 lines not on this page · raw message

Signature · 1 line
2.26.2
#3 lore raw

PATCH v6 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

Hi Marcin,

Quoted 33 lines

From: Marcin Sloniewski <[email protected]>
Sent: mercredi 8 juillet 2020 19:56

This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C.

This works with generic stm32mp1 config.
Right now only booting from SD card is supported.

---

Changes in v6:
- forgot to add changes in v5 ;(

Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported

Changes in v4:
- removed unnecessary pull up on uart4 rx

Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order

Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot

Quoted 11 lines
 arch/arm/dts/Makefile                         |   1 +
 .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 125 ++++++
 arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
 arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
 5 files changed, 709 insertions(+)
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts

Thanks

Patrick

#4 lore raw

PATCH v6 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board

Quoted 46 lines · Patrick DELAUNAY

Hi Marcin,

Quoted 33 lines

From: Marcin Sloniewski <[email protected]>
Sent: mercredi 8 juillet 2020 19:56

This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C.

This works with generic stm32mp1 config.
Right now only booting from SD card is supported.

---

Changes in v6:
- forgot to add changes in v5 ;(

Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported

Changes in v4:
- removed unnecessary pull up on uart4 rx

Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order

Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot

Quoted 11 lines
 arch/arm/dts/Makefile                         |   1 +
 .../dts/stm32mp157c-odyssey-som-u-boot.dtsi   | 125 ++++++
 arch/arm/dts/stm32mp157c-odyssey-som.dtsi     | 364 ++++++++++++++++++
 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi  |  58 +++
 arch/arm/dts/stm32mp157c-odyssey.dts          | 161 ++++++++
 5 files changed, 709 insertions(+)
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi
 create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
Quoted 5 lines

Thanks

Patrick

Applied to u-boot-stm/master

Thanks

Patrice