ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
Subsystems (2)
PATCH v4 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
This commit adds device tree files supporting
SBC from Seeed Studio based on STM32MP157C.
This works with generic stm32mp1 config.
Right now only booting from SD card is supported.
---
Changes in v4:
- removed unnecessary pull up on uart4 rx
Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order
Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot
arch/arm/dts/Makefile | 1 + .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 134 +++++++ arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ 5 files changed, 718 insertions(+) create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
arch/arm/dts/Makefile +1 -0
@@ -917,6 +917,7 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-odyssey.dtb \ stm32mp15xx-dhcom-pdk2.dtb \ stm32mp15xx-dhcor-avenger96.dtb
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file +134 -0
134 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file +364 -0
364 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file +58 -0
58 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey.dts new file +161 -0
161 lines not on this page · raw message
Signature · 1 line
2.26.2
PATCH v5 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
This commit adds device tree files supporting
SBC from Seeed Studio based on STM32MP157C.
This works with generic stm32mp1 config.
Right now only booting from SD card is supported.
---
Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported
Changes in v4:
- removed unnecessary pull up on uart4 rx
Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order
Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot
arch/arm/dts/Makefile | 1 + .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 125 ++++++ arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ 5 files changed, 709 insertions(+) create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
arch/arm/dts/Makefile +1 -0
@@ -931,6 +931,7 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-odyssey.dtb \ stm32mp15xx-dhcom-pdk2.dtb \ stm32mp15xx-dhcor-avenger96.dtb
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file +125 -0
125 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file +364 -0
364 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file +58 -0
58 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey.dts new file +161 -0
161 lines not on this page · raw message
Signature · 1 line
2.26.2
PATCH v6 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
This commit adds device tree files supporting
SBC from Seeed Studio based on STM32MP157C.
This works with generic stm32mp1 config.
Right now only booting from SD card is supported.
---
Changes in v6:
- forgot to add changes in v5 ;(
Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supported
Changes in v4:
- removed unnecessary pull up on uart4 rx
Changes in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical order
Changes in v2:
- removed st,adc_usb_pd from config since that
adc connection is non-existent which caused
warning or hang during boot
arch/arm/dts/Makefile | 1 + .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 125 ++++++ arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ 5 files changed, 709 insertions(+) create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
arch/arm/dts/Makefile +1 -0
@@ -931,6 +931,7 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-odyssey.dtb \ stm32mp15xx-dhcom-pdk2.dtb \ stm32mp15xx-dhcor-avenger96.dtb
arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi new file +125 -0
125 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey-som.dtsi new file +364 -0
364 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi new file +58 -0
58 lines not on this page · raw message
arch/arm/dts/stm32mp157c-odyssey.dts new file +161 -0
161 lines not on this page · raw message
Signature · 1 line
2.26.2
PATCH v6 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
Hi Marcin,
Quoted 33 lines
From: Marcin Sloniewski <[email protected]>
Sent: mercredi 8 juillet 2020 19:56This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C.
This works with generic stm32mp1 config.
Right now only booting from SD card is supported.Signed-off-by Marcin Sloniewski <[email protected]>---
Changes in v6:
- forgot to add changes in v5 ;(Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supportedChanges in v4:
- removed unnecessary pull up on uart4 rxChanges in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical orderChanges in v2:
- removedst,adc_usb_pdfrom config since that
adc connection is non-existent which caused
warning or hang during boot
Quoted 11 lines
arch/arm/dts/Makefile | 1 + .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 125 ++++++ arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ 5 files changed, 709 insertions(+) create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
Thanks
Patrick
PATCH v6 1/1 ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board
Quoted 46 lines · Patrick DELAUNAY
Hi Marcin,
Quoted 33 lines
From: Marcin Sloniewski <[email protected]>
Sent: mercredi 8 juillet 2020 19:56This commit adds device tree files supporting SBC from Seeed Studio based on STM32MP157C.
This works with generic stm32mp1 config.
Right now only booting from SD card is supported.Signed-off-by Marcin Sloniewski <[email protected]>---
Changes in v6:
- forgot to add changes in v5 ;(Changes in v5:
- removed description of PLL1 which is now handled by OPP info
- removed cd-gpio for sdmmc1 since it is not yet supportedChanges in v4:
- removed unnecessary pull up on uart4 rxChanges in v3:
- changed name of dts files from odyssey-stm32mp157c... to stm32mp157c-odyssey...
- removed usbotg node config
- add new board in dts/Makefile in alphabetical orderChanges in v2:
- removedst,adc_usb_pdfrom config since that
adc connection is non-existent which caused
warning or hang during bootQuoted 11 lines
arch/arm/dts/Makefile | 1 + .../dts/stm32mp157c-odyssey-som-u-boot.dtsi | 125 ++++++ arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 364 ++++++++++++++++++ arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi | 58 +++ arch/arm/dts/stm32mp157c-odyssey.dts | 161 ++++++++ 5 files changed, 709 insertions(+) create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey-u-boot.dtsi create mode 100644 arch/arm/dts/stm32mp157c-odyssey.dts
Quoted 5 lines
Reviewed-by Patrick Delaunay <[email protected]>Thanks
Patrick
Applied to u-boot-stm/master
Thanks
Patrice