dt-bindings: vendor-prefixes: add Seeed Studio
PATCH v6 1/3 dt-bindings: vendor-prefixes: add Seeed Studio
Add the "seeed" vendor prefix for Seeed Technology Co., Ltd
Website: https://www.seeedstudio.com/
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -902,6 +902,8 @@ patternProperties: description: Schindler "^seagate,.*": description: Seagate Technology PLC + "^seeed,.*": + description: Seeed Technology Co., Ltd "^seirobotics,.*": description: Shenzhen SEI Robotics Co., Ltd "^semtech,.*":
Signature · 1 line
2.27.0
PATCH v6 2/3 dt-bindings: arm: stm32: document Odyssey compatible
Document device tree bindings of Seeed SoM and carrier board.
--- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/stm32/stm32.yaml +6 -0
@@ -50,4 +50,10 @@ properties: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: Odyssey STM32MP1 SoM based Boards + items: + - enum: + - seeed,stm32mp157c-odyssey + - const: seeed,stm32mp157c-odyssey-som + - const: st,stm32mp157 ...
Signature · 1 line
2.27.0
Rob Herring
maintainerRe: [PATCH v6 2/3] dt-bindings: arm: stm32: document Odyssey compatible
Quoted 7 lines · Marcin Sloniewski
Document device tree bindings of Seeed SoM and carrier board.
Signed-off-by Marcin Sloniewski <[email protected]>--- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply.
If a tag was not added on purpose, please state why and what changed.
PATCH v6 3/3 ARM: dts: stm32: add initial support for stm32mp157-odyssey board
In reply to Marcin SloniewskiAdd support for Seeed Studio's stm32mp157c odyssey board. Board consists of SoM with stm32mp157c with 4GB eMMC and 512 MB DDR3 RAM and carrier board with USB and ETH interfaces, SD card connector, wifi and BT chip AP6236.
In this patch only basic kernel boot is supported and interfacing SD card and on-board eMMC.
---
Changes in v6:
- add reset pin for eth phy
- move pinctrl for sdmmc2 to stm32mp15-pinctrl.dtsi
Changes in v5:
- fix schema for board's dts
Changes in v4:
- add seeed,stm32mp157c-odyssey-som in compatible for carrier board
- fix sdmmc2 interface by changing one of the pins to use
- change eth phy address to 7
Changes in v3:
- fix compilation on tip of stm32-next
due to change in names for pinctrl
- fix deprecated binding for led node
- fix redundant "okay" statuses
- add phy part number for eth in comment
Changes in v2:
- add new odyssey dts to Makefile
arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 18 ++ .../arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 276 ++++++++++++++++++ arch/arm/boot/dts/stm32mp157c-odyssey.dts | 76 +++++ 4 files changed, 372 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi create mode 100644 arch/arm/boot/dts/stm32mp157c-odyssey.dts
arch/arm/boot/dts/Makefile +2 -1
@@ -1047,7 +1047,8 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb \ - stm32mp157c-lxa-mc1.dtb + stm32mp157c-lxa-mc1.dtb \ + stm32mp157c-odyssey.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +18 -0
@@ -1437,6 +1437,24 @@ pins { }; }; + sdmmc2_d47_pins_d: sdmmc2-d47-3 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { pins1 { pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi new file +276 -0
276 lines not on this page · raw message
arch/arm/boot/dts/stm32mp157c-odyssey.dts new file +76 -0
76 lines not on this page · raw message
Signature · 1 line
2.27.0