Adds starting the idle domain privileged
v7 cover Adds starting the idle domain privileged
This series makes it so that the idle domain is started privileged under the default policy, which the SILO policy inherits, and under the flask policy. It then introduces a new one-way XSM hook, xsm_transition_running, that is hooked by an XSM policy to transition the idle domain to its running privilege level.
Changes in v7:
- adjusted error message in default and flask xsm_set_system_active hooks
- merged panic messages in arm and x86 setup.c to a single line
Changes in v6:
- readded the setting of is_privileged in flask_set_system_active()
- clarified comment on is_privileged in flask_set_system_active()
- added ASSERT on is_privileged and self_sid in flask_set_system_active()
- fixed err code returned on Arm for xsm_set_system_active() panic message
Changes in v5:
- dropped setting is_privileged in flask_set_system_active()
- added err code returned by xsm_set_system_active() to panic message
Changes in v4:
- reworded patch 1 commit messaged
- fixed whitespace to coding style
- fixed comment to coding style
Changes in v3:
- renamed *_transition_running() to *_set_system_active()
- changed the XSM hook set_system_active() from void to int return
- added ASSERT check for the expected privilege level each XSM policy expected
- replaced a check against is_privileged in each arch with checking the return value from the call to xsm_set_system_active()
Changes in v2:
- renamed flask_domain_runtime_security() to flask_transition_running()
- added the missed assignment of self_sid
Daniel P. Smith (2):
xsm: create idle domain privileged and demote after setup
flask: implement xsm_set_system_active
tools/flask/policy/modules/xen.if | 6 +++++ tools/flask/policy/modules/xen.te | 1 + tools/flask/policy/policy/initial_sids | 1 + xen/arch/arm/setup.c | 3 +++ xen/arch/x86/setup.c | 4 ++++ xen/common/sched/core.c | 7 +++++- xen/include/xsm/dummy.h | 17 ++++++++++++++ xen/include/xsm/xsm.h | 6 +++++ xen/xsm/dummy.c | 1 + xen/xsm/flask/hooks.c | 32 +++++++++++++++++++++++++- xen/xsm/flask/policy/initial_sids | 1 + 11 files changed, 77 insertions(+), 2 deletions(-)
Signature · 1 line
2.20.1
PATCH v7 1/2 xsm: create idle domain privileged and demote after setup
There are new capabilities, dom0less and hyperlaunch, that introduce internal hypervisor logic which needs to make resource allocation calls that are protected by XSM access checks. This creates an issue as a subset of the hypervisor code is executed under a system domain, the idle domain, that is represented by a per-CPU non-privileged struct domain. To enable these new capabilities to function correctly but in a controlled manner, this commit changes the idle system domain to be created as a privileged domain under the default policy and demoted before transitioning to running. A new XSM hook, xsm_set_system_active(), is introduced to allow each XSM policy type to demote the idle domain appropriately for that policy type. In the case of SILO, it inherits the default policy's hook for xsm_set_system_active().
For flask a stub is added to ensure that flask policy system will function correctly with this patch until flask is extended with support for starting the idle domain privileged and properly demoting it on the call to xsm_set_system_active().
--- xen/arch/arm/setup.c | 3 +++ xen/arch/x86/setup.c | 4 ++++ xen/common/sched/core.c | 7 ++++++- xen/include/xsm/dummy.h | 17 +++++++++++++++++ xen/include/xsm/xsm.h | 6 ++++++ xen/xsm/dummy.c | 1 + xen/xsm/flask/hooks.c | 23 +++++++++++++++++++++++ 7 files changed, 60 insertions(+), 1 deletion(-)
xen/arch/arm/setup.c +3 -0
@@ -1048,6 +1048,9 @@ void __init start_xen(unsigned long boot_phys_offset,/* Hide UART from DOM0 if we're using it */ serial_endboot (); +if ( (rc =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , rc); + system_state = SYS_STATE_active;for_each_domain ( d )
xen/arch/x86/setup.c +4 -0
@@ -620,6 +620,10 @@ static void noreturn init_done(void) {void *va;unsigned long start, end; +int err; + +if ( (err =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , err); system_state = SYS_STATE_active;
xen/common/sched/core.c +6 -1
@@ -3021,7 +3021,12 @@ void __init scheduler_init(void) sched_ratelimit_us =SCHED_DEFAULT_RATELIMIT_US ; } - idle_domain =domain_create (DOMID_IDLE ,NULL ,0 ); +/* +* The idle dom is created privileged to ensure unrestricted access during +* setup and will be demoted by xsm_set_system_active() when setup is +* complete. +*/ + idle_domain =domain_create (DOMID_IDLE ,NULL , CDF_privileged);BUG_ON (IS_ERR (idle_domain));BUG_ON (nr_cpu_ids >ARRAY_SIZE (idle_vcpu)); idle_domain->vcpu = idle_vcpu;
xen/include/xsm/dummy.h +17 -0
@@ -101,6 +101,23 @@ static always_inline int xsm_default_action( } } +static XSM_INLINE int cf_check xsm_set_system_active(void) +{ +struct domain *d = current->domain; + +ASSERT (d->is_privileged); + +if ( d->domain_id !=DOMID_IDLE ) + { +printk ("%s: should only be called by idle domain\n" , __func__); +return -EPERM ; + } + + d->is_privileged = false; + +return 0 ; +} + static XSM_INLINE void cf_check xsm_security_domaininfo(struct domain *d,struct xen_domctl_getdomaininfo *info) {
xen/include/xsm/xsm.h +6 -0
@@ -52,6 +52,7 @@ typedef enum xsm_default xsm_default_t;* !!! WARNING !!! */ struct xsm_ops { +int (*set_system_active)(void );void (*security_domaininfo)(struct domain *d,struct xen_domctl_getdomaininfo *info);int (*domain_create)(struct domain *d,uint32_t ssidref);
@@ -208,6 +209,11 @@ extern struct xsm_ops xsm_ops;#ifndef XSM_NO_WRAPPERS +static inline int xsm_set_system_active (void ) +{ +return alternative_call (xsm_ops.set_system_active); +} +static inline void xsm_security_domaininfo (struct domain *d,struct xen_domctl_getdomaininfo *info) {
xen/xsm/dummy.c +1 -0
@@ -14,6 +14,7 @@#include <xsm/dummy.h> static const struct xsm_ops __initconst_cf_clobber dummy_ops = { + .set_system_active = xsm_set_system_active, .security_domaininfo = xsm_security_domaininfo, .domain_create = xsm_domain_create, .getdomaininfo = xsm_getdomaininfo,
xen/xsm/flask/hooks.c +23 -0
@@ -186,6 +186,28 @@ static int cf_check flask_domain_alloc_security(struct domain *d)return 0 ; } +static int cf_check flask_set_system_active(void) +{ +struct domain *d = current->domain; + +ASSERT (d->is_privileged); + +if ( d->domain_id !=DOMID_IDLE ) + { +printk ("%s: should only be called by idle domain\n" , __func__); +return -EPERM ; + } + +/* +* While is_privileged has no significant meaning under flask, set to false +* as is_privileged is not only used for a privilege check but also as a type +* of domain check, specifically if the domain is the control domain. +*/ + d->is_privileged = false; + +return 0 ; +} + static void cf_check flask_domain_free_security(struct domain *d) {struct domain_security_struct *dsec = d->ssid;
@@ -1766,6 +1788,7 @@ static int cf_check flask_argo_send(#endif static const struct xsm_ops __initconst_cf_clobber flask_ops = { + .set_system_active = flask_set_system_active, .security_domaininfo = flask_security_domaininfo, .domain_create = flask_domain_create, .getdomaininfo = flask_getdomaininfo,
Signature · 1 line
2.20.1
Re: [PATCH v7 1/2] xsm: create idle domain privileged and demote after setup
Hi Daniel,
Quoted 19 lines · Daniel P. Smith
There are new capabilities, dom0less and hyperlaunch, that introduce internal hypervisor logic which needs to make resource allocation calls that are protected by XSM access checks. This creates an issue as a subset of the hypervisor code is executed under a system domain, the idle domain, that is represented by a per-CPU non-privileged struct domain. To enable these new capabilities to function correctly but in a controlled manner, this commit changes the idle system domain to be created as a privileged domain under the default policy and demoted before transitioning to running. A new XSM hook,
xsm_set_system_active(), is introduced to allow each XSM policy type to demote the idle domain appropriately for that policy type. In the case of SILO, it inherits the default policy's hook forxsm_set_system_active().For flask a stub is added to ensure that flask policy system will function correctly with this patch until flask is extended with support for starting the idle domain privileged and properly demoting it on the call to
xsm_set_system_active().
Quoted 4 lines
Signed-off-by Daniel P. Smith <[email protected]>Reviewed-by Jason Andryuk <[email protected]>Reviewed-by Luca Fancellu <[email protected]>
Regards,
Rahul
Quoted 166 lines
---
xen/arch/arm/setup.c | 3 +++ xen/arch/x86/setup.c | 4 ++++ xen/common/sched/core.c | 7 ++++++- xen/include/xsm/dummy.h | 17 +++++++++++++++++ xen/include/xsm/xsm.h | 6 ++++++ xen/xsm/dummy.c | 1 + xen/xsm/flask/hooks.c | 23 +++++++++++++++++++++++ 7 files changed, 60 insertions(+), 1 deletion(-)xen/arch/arm/setup.c +3
-0@@ -1048,6 +1048,9 @@ void __init start_xen(unsigned long boot_phys_offset,/* Hide UART from DOM0 if we're using it */ serial_endboot (); +if ( (rc =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , rc); + system_state = SYS_STATE_active;for_each_domain ( d )xen/arch/x86/setup.c +4
-0@@ -620,6 +620,10 @@ static void noreturn init_done(void) {void *va;unsigned long start, end; +int err; + +if ( (err =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , err); system_state = SYS_STATE_active;xen/common/sched/core.c +6
-1@@ -3021,7 +3021,12 @@ void __init scheduler_init(void) sched_ratelimit_us =SCHED_DEFAULT_RATELIMIT_US ; } - idle_domain =domain_create (DOMID_IDLE ,NULL ,0 ); +/* +* The idle dom is created privileged to ensure unrestricted access during +* setup and will be demoted by xsm_set_system_active() when setup is +* complete. +*/ + idle_domain =domain_create (DOMID_IDLE ,NULL , CDF_privileged);BUG_ON (IS_ERR (idle_domain));BUG_ON (nr_cpu_ids >ARRAY_SIZE (idle_vcpu)); idle_domain->vcpu = idle_vcpu;xen/include/xsm/dummy.h +17
-0@@ -101,6 +101,23 @@ static always_inline int xsm_default_action( } } +static XSM_INLINE int cf_check xsm_set_system_active(void) +{ +struct domain *d = current->domain; + +ASSERT (d->is_privileged); + +if ( d->domain_id !=DOMID_IDLE ) + { +printk ("%s: should only be called by idle domain\n" , __func__); +return -EPERM ; + } + + d->is_privileged = false; + +return 0 ; +} +static
XSM_INLINEvoidcf_checkxsm_security_domaininfo(
struct domain *d, structxen_domctl_getdomaininfo*info)
{xen/include/xsm/xsm.h +6
-0@@ -52,6 +52,7 @@ typedef enum xsm_default xsm_default_t;* !!! WARNING !!! */ struct xsm_ops { +int (*set_system_active)(void );void (*security_domaininfo)(struct domain *d,struct xen_domctl_getdomaininfo *info);int (*domain_create)(struct domain *d,uint32_t ssidref);@@ -208,6 +209,11 @@ extern struct xsm_ops xsm_ops;#ifndef XSM_NO_WRAPPERS +static inline int xsm_set_system_active (void ) +{ +return alternative_call (xsm_ops.set_system_active); +} +static inline void xsm_security_domaininfo(
struct domain *d, structxen_domctl_getdomaininfo*info)
{xen/xsm/dummy.c +1
-0@@ -14,6 +14,7 @@#include <xsm/dummy.h> static const struct xsm_ops __initconst_cf_clobber dummy_ops = { + .set_system_active = xsm_set_system_active, .security_domaininfo = xsm_security_domaininfo, .domain_create = xsm_domain_create, .getdomaininfo = xsm_getdomaininfo,xen/xsm/flask/hooks.c +23
-0@@ -186,6 +186,28 @@ static int cf_check flask_domain_alloc_security(struct domain *d)return 0 ; } +static int cf_check flask_set_system_active(void) +{ +struct domain *d = current->domain; + +ASSERT (d->is_privileged); + +if ( d->domain_id !=DOMID_IDLE ) + { +printk ("%s: should only be called by idle domain\n" , __func__); +return -EPERM ; + } + +/* +* While is_privileged has no significant meaning under flask, set to false +* as is_privileged is not only used for a privilege check but also as a type +* of domain check, specifically if the domain is the control domain. +*/ + d->is_privileged = false; + +return 0 ; +} + static void cf_check flask_domain_free_security(struct domain *d) {struct domain_security_struct *dsec = d->ssid;@@ -1766,6 +1788,7 @@ static int cf_check flask_argo_send(#endif static const struct xsm_ops __initconst_cf_clobber flask_ops = { + .set_system_active = flask_set_system_active, .security_domaininfo = flask_security_domaininfo, .domain_create = flask_domain_create, .getdomaininfo = flask_getdomaininfo,Signature · 1 line
2.20.1
Re: [PATCH v7 1/2] xsm: create idle domain privileged and demote after setup
In reply to Daniel P. SmithQuoted 5 lines · Daniel P. Smith
There are new capabilities, dom0less and hyperlaunch, that introduce internal hypervisor logic which needs to make resource allocation calls that are protected by XSM access checks. This creates an issue as a subset of the hypervisor code is executed under a system domain, the idle domain, that is represented by a per-CPU non-privileged struct domain.
Should you mention that this subset of hypervisor code that requires extended privileges but executed in the idle vCPU context strictly only happens during initial domain(s) creation?
Quoted 46 lines
To enable these new
capabilities to function correctly but in a controlled manner, this commit changes the idle system domain to be created as a privileged domain under the default policy and demoted before transitioning to running. A new XSM hook,xsm_set_system_active(), is introduced to allow each XSM policy type to demote the idle domain appropriately for that policy type. In the case of SILO, it inherits the default policy's hook forxsm_set_system_active().For flask a stub is added to ensure that flask policy system will function correctly with this patch until flask is extended with support for starting the idle domain privileged and properly demoting it on the call to
xsm_set_system_active().Signed-off-by Daniel P. Smith <[email protected]>Reviewed-by Jason Andryuk <[email protected]>Reviewed-by Luca Fancellu <[email protected]>--- xen/arch/arm/setup.c | 3 +++ xen/arch/x86/setup.c | 4 ++++ xen/common/sched/core.c | 7 ++++++- xen/include/xsm/dummy.h | 17 +++++++++++++++++ xen/include/xsm/xsm.h | 6 ++++++ xen/xsm/dummy.c | 1 + xen/xsm/flask/hooks.c | 23 +++++++++++++++++++++++ 7 files changed, 60 insertions(+), 1 deletion(-)xen/arch/arm/setup.c +3
-0@@ -1048,6 +1048,9 @@ void __init start_xen(unsigned long boot_phys_offset,/* Hide UART from DOM0 if we're using it */ serial_endboot (); +if ( (rc =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , rc); + system_state = SYS_STATE_active;for_each_domain ( d )xen/arch/x86/setup.c +0
-0
xen/arch/x86/setup.c static void noreturn init_done(void) · line 626
Quoted 7 lines
xen/arch/x86/setup.c +4
-0@@ -620,6 +620,10 @@ static void noreturn init_done(void) {void *va;unsigned long start, end; +int err; + +if ( (err =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , err);
Can you place err on a new line to make the line length no longer than strictly necessary.
I think you could also reduce the printed message to:
"unable to switch to SYSTEM_ACTIVE privilege: %d\n"
Which could likely fit in a line (seeing as others are fine with the longer message I'm not going to insist).
Quoted 13 lines
xen/xsm/flask/hooks.c +5
-0@@ -186,6 +186,28 @@ static int cf_check flask_domain_alloc_security(struct domain *d)return 0 ; } +static int cf_check flask_set_system_active(void) +{ +struct domain *d = current->domain; + +ASSERT (d->is_privileged);
xen/xsm/flask/hooks.c static int cf_check flask_domain_alloc_security(struct domain *d) · line 203
Quoted 10 lines
xen/xsm/flask/hooks.c +10
-0+ +if ( d->domain_id !=DOMID_IDLE ) + { +printk ("%s: should only be called by idle domain\n" , __func__); +return -EPERM ; + } + +/* +* While is_privileged has no significant meaning under flask, set to false +* as is_privileged is not only used for a privilege check but also as a type
Nit: I think this line is over 80 cols.
Thanks, Roger.
Re: [PATCH v7 1/2] xsm: create idle domain privileged and demote after setup
Quoted 10 lines · Roger Pau Monné
Quoted 5 lines · Daniel P. Smith
There are new capabilities, dom0less and hyperlaunch, that introduce internal hypervisor logic which needs to make resource allocation calls that are protected by XSM access checks. This creates an issue as a subset of the hypervisor code is executed under a system domain, the idle domain, that is represented by a per-CPU non-privileged struct domain.
Should you mention that this subset of hypervisor code that requires extended privileges but executed in the idle vCPU context strictly only happens during initial domain(s) creation?
Sure, I will work in some wording to clarify that point.
Quoted 57 lines
Quoted 46 lines
To enable these new
capabilities to function correctly but in a controlled manner, this commit changes the idle system domain to be created as a privileged domain under the default policy and demoted before transitioning to running. A new XSM hook,xsm_set_system_active(), is introduced to allow each XSM policy type to demote the idle domain appropriately for that policy type. In the case of SILO, it inherits the default policy's hook forxsm_set_system_active().For flask a stub is added to ensure that flask policy system will function correctly with this patch until flask is extended with support for starting the idle domain privileged and properly demoting it on the call to
xsm_set_system_active().Signed-off-by Daniel P. Smith <[email protected]>Reviewed-by Jason Andryuk <[email protected]>Reviewed-by Luca Fancellu <[email protected]>--- xen/arch/arm/setup.c | 3 +++ xen/arch/x86/setup.c | 4 ++++ xen/common/sched/core.c | 7 ++++++- xen/include/xsm/dummy.h | 17 +++++++++++++++++ xen/include/xsm/xsm.h | 6 ++++++ xen/xsm/dummy.c | 1 + xen/xsm/flask/hooks.c | 23 +++++++++++++++++++++++ 7 files changed, 60 insertions(+), 1 deletion(-)xen/arch/arm/setup.c +3
-0@@ -1048,6 +1048,9 @@ void __init start_xen(unsigned long boot_phys_offset,/* Hide UART from DOM0 if we're using it */ serial_endboot (); +if ( (rc =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , rc); + system_state = SYS_STATE_active;for_each_domain ( d )xen/arch/x86/setup.c +0
-0xen/arch/x86/setup.c static void noreturn init_done(void) · line 626
Quoted 7 lines
xen/arch/x86/setup.c +4
-0@@ -620,6 +620,10 @@ static void noreturn init_done(void) {void *va;unsigned long start, end; +int err; + +if ( (err =xsm_set_system_active ()) !=0 ) +panic ("xsm(err=%d): unable to set hypervisor to SYSTEM_ACTIVE privilege\n" , err);Can you place err on a new line to make the line length no longer than strictly necessary.
Quoted 6 lines
I think you could also reduce the printed message to:
"unable to switch to
SYSTEM_ACTIVEprivilege: %d\n"Which could likely fit in a line (seeing as others are fine with the longer message I'm not going to insist).
Nope, I am with you on this. I would prefer to have less than 80 or wrap. I like the suggestion, it will get it below 80 without any loss of meaning.
Quoted 17 lines
Quoted 17 lines
xen/xsm/flask/hooks.c +9
-0@@ -186,6 +186,28 @@ static int cf_check flask_domain_alloc_security(struct domain *d)return 0 ; } +static int cf_check flask_set_system_active(void) +{ +struct domain *d = current->domain; + +ASSERT (d->is_privileged); + +if ( d->domain_id !=DOMID_IDLE ) + { +printk ("%s: should only be called by idle domain\n" , __func__);
Quoted 8 lines
xen/xsm/flask/hooks.c static int cf_check flask_domain_alloc_security(struct domain *d) · line 203
Quoted 6 lines
xen/xsm/flask/hooks.c +6
-0+return -EPERM ; + } + +/* +* While is_privileged has no significant meaning under flask, set to false +* as is_privileged is not only used for a privilege check but also as a type Nit: I think this line is over 80 cols.
Ugh, probably spell check pushed it over, and I didn't catch it. Will fix.
v/r,
dps
PATCH v7 2/2 flask: implement xsm_set_system_active
In reply to Daniel P. SmithThis commit implements full support for starting the idle domain privileged by introducing a new flask label xenboot_t which the idle domain is labeled with at creation. It then provides the implementation for the XSM hook xsm_set_system_active to relabel the idle domain to the existing xen_t flask label.
In the reference flask policy a new macro, xen_build_domain(target), is introduced for creating policies for dom0less/hyperlaunch allowing the hypervisor to create and assign the necessary resources for domain construction.
--- tools/flask/policy/modules/xen.if | 6 ++++++ tools/flask/policy/modules/xen.te | 1 + tools/flask/policy/policy/initial_sids | 1 + xen/xsm/flask/hooks.c | 9 ++++++++- xen/xsm/flask/policy/initial_sids | 1 + 5 files changed, 17 insertions(+), 1 deletion(-)
tools/flask/policy/modules/xen.if +6 -0
@@ -62,6 +62,12 @@ define(`create_domain_common', ` setparam altp2mhvm altp2mhvm_op dm }; ') +# xen_build_domain(target) +# Allow a domain to be created at boot by the hypervisor +define(`xen_build_domain', ` + allow xenboot_t $1_channel:event create; +') + # create_domain(priv, target) # Allow a domain to be created directly define(`create_domain', `
tools/flask/policy/modules/xen.te +1 -0
@@ -24,6 +24,7 @@ attribute mls_priv; ################################################################################ # The hypervisor itself +type xenboot_t, xen_type, mls_priv; type xen_t, xen_type, mls_priv; # Domain 0
tools/flask/policy/policy/initial_sids +1 -0
@@ -2,6 +2,7 @@ # objects created before the policy is loaded or for objects that do not have a # label defined in some other manner. +sid xenboot gen_context(system_u:system_r:xenboot_t,s0) sid xen gen_context(system_u:system_r:xen_t,s0) sid dom0 gen_context(system_u:system_r:dom0_t,s0) sid domxen gen_context(system_u:system_r:domxen_t,s0)
xen/xsm/flask/hooks.c +8 -1
@@ -168,7 +168,7 @@ static int cf_check flask_domain_alloc_security(struct domain *d)switch ( d->domain_id ) {case DOMID_IDLE : - dsec->sid =SECINITSID_XEN ; + dsec->sid =SECINITSID_XENBOOT ;break ;case DOMID_XEN : dsec->sid =SECINITSID_DOMXEN ;
@@ -188,9 +188,14 @@ static int cf_check flask_domain_alloc_security(struct domain *d) static int cf_check flask_set_system_active(void) { +struct domain_security_struct *dsec;struct domain *d = current->domain; + dsec = d->ssid; +ASSERT (d->is_privileged); +ASSERT (dsec->sid ==SECINITSID_XENBOOT ); +ASSERT (dsec->self_sid ==SECINITSID_XENBOOT );if ( d->domain_id !=DOMID_IDLE ) {
@@ -205,6 +210,8 @@ static int cf_check flask_set_system_active(void)*/ d->is_privileged = false; + dsec->self_sid = dsec->sid =SECINITSID_XEN ; +return 0 ; }
xen/xsm/flask/policy/initial_sids +1 -0
@@ -3,6 +3,7 @@ # # Define initial security identifiers # +sid xenboot sid xen sid dom0 sid domio
Signature · 1 line
2.20.1
Re: [PATCH v7 2/2] flask: implement xsm_set_system_active
Hi Daniel,
Quoted 13 lines · Daniel P. Smith
This commit implements full support for starting the idle domain privileged by introducing a new flask label
xenboot_twhich the idle domain is labeled with at creation. It then provides the implementation for the XSM hookxsm_set_system_activeto relabel the idle domain to the existingxen_tflask label.In the reference flask policy a new macro,
xen_build_domain(target), is introduced for creating policies for dom0less/hyperlaunch allowing the hypervisor to create and assign the necessary resources for domain construction.
Quoted 4 lines
Signed-off-by Daniel P. Smith <[email protected]>Reviewed-by Jason Andryuk <[email protected]>Reviewed-by Luca Fancellu <[email protected]>Tested-by Luca Fancellu <[email protected]>
Regards,
Rahul
Quoted 102 lines
---
tools/flask/policy/modules/xen.if | 6 ++++++ tools/flask/policy/modules/xen.te | 1 + tools/flask/policy/policy/initial_sids | 1 + xen/xsm/flask/hooks.c | 9 ++++++++- xen/xsm/flask/policy/initial_sids | 1 + 5 files changed, 17 insertions(+), 1 deletion(-)tools/flask/policy/modules/xen.if +6
-0@@ -62,6 +62,12 @@ define(`create_domain_common', ` setparam altp2mhvm altp2mhvm_op dm }; ') +# xen_build_domain(target) +# Allow a domain to be created at boot by the hypervisor +define(`xen_build_domain', ` + allow xenboot_t $1_channel:event create; +') + # create_domain(priv, target) # Allow a domain to be created directlydefine(
create_domain',tools/flask/policy/modules/xen.te +1
-0@@ -24,6 +24,7 @@ attribute mls_priv; ################################################################################ # The hypervisor itself +type xenboot_t, xen_type, mls_priv; type xen_t, xen_type, mls_priv; # Domain 0tools/flask/policy/policy/initial_sids +1
-0@@ -2,6 +2,7 @@ # objects created before the policy is loaded or for objects that do not have a # label defined in some other manner. +sid xenboot gen_context(system_u:system_r:xenboot_t,s0) sid xen gen_context(system_u:system_r:xen_t,s0) sid dom0 gen_context(system_u:system_r:dom0_t,s0) sid domxen gen_context(system_u:system_r:domxen_t,s0)xen/xsm/flask/hooks.c +8
-1@@ -168,7 +168,7 @@ static int cf_check flask_domain_alloc_security(struct domain *d)switch ( d->domain_id ) {case DOMID_IDLE : - dsec->sid =SECINITSID_XEN ; + dsec->sid =SECINITSID_XENBOOT ;break ;case DOMID_XEN : dsec->sid =SECINITSID_DOMXEN ;@@ -188,9 +188,14 @@ static int cf_check flask_domain_alloc_security(struct domain *d) static int cf_check flask_set_system_active(void) { +struct domain_security_struct *dsec;struct domain *d = current->domain; + dsec = d->ssid; +ASSERT (d->is_privileged); +ASSERT (dsec->sid ==SECINITSID_XENBOOT ); +ASSERT (dsec->self_sid ==SECINITSID_XENBOOT );if ( d->domain_id !=DOMID_IDLE ) {@@ -205,6 +210,8 @@ static int cf_check flask_set_system_active(void)*/ d->is_privileged = false; + dsec->self_sid = dsec->sid =SECINITSID_XEN ; +return 0 ; }xen/xsm/flask/policy/initial_sids +1
-0@@ -3,6 +3,7 @@ # # Define initial security identifiers # +sid xenbootsid xen
sid dom0
sid domioSignature · 1 line
2.20.1
PING: [PATCH v7 0/2] Adds starting the idle domain privileged
In reply to Daniel P. SmithQuoted 9 lines · Daniel P. Smith
This series makes it so that the idle domain is started privileged under the default policy, which the SILO policy inherits, and under the flask policy. It then introduces a new one-way XSM hook,
xsm_transition_running, that is hooked by an XSM policy to transition the idle domain to its running privilege level.Changes in v7:
- adjusted error message in default and flaskxsm_set_system_activehooks
- merged panic messages in arm and x86setup.cto a single line
Pinging to see if there are open issues I need to address or is the series acceptable? IIU I am missing an ACK on patch 1 of the series from x86 and sched maintainers. If it is already in your queues, apologies for the nag.
V/r,
Daniel P. Smith
Re: PING: [PATCH v7 0/2] Adds starting the idle domain privileged
Quoted 7 lines · Daniel P. Smith
Quoted 5 lines · Daniel P. Smith
This series makes it so that the idle domain is started privileged under the default policy, which the SILO policy inherits, and under the flask policy. It then introduces a new one-way XSM hook,
xsm_transition_running, that is hooked by an XSM policy to transition the idle domain to its running privilege level.
Quoted 8 lines
Quoted 4 lines
Changes in v7:
- adjusted error message in default and flaskxsm_set_system_activehooks
- merged panic messages in arm and x86setup.cto a single linePinging to see if there are open issues I need to address or is the series acceptable? IIU I am missing an ACK on patch 1 of the series from x86 and sched maintainers.
And a REST maintainer ack (to stand in for the designated maintainer continuing to play dead).
Also I notice your ping did include neither x86 nor sched maintainers as (at least) Cc.
Jan