Skip to contentSkip to conversation

Enable RPi header on j721e sk

PATCH Superseded Rahul T R 1 participant 4 messages May 30, 2022

Subsystems (3)

v3 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Rahul T R

author
#0 lore raw

v3 cover Enable RPi header on j721e sk

The following series of patches enables RPi header on j721e sk. It is a 40 pin io expasion header which brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node

v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property, since $ref is added
- Remove the label in the example
- Fix the indentation in the example

Rahul T R (1):
dt-bindings: mfd: ti,j721e-system-controller: Add clock property

Sinthu Raja (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

 .../mfd/ti,j721e-system-controller.yaml       |  12 +++
 .../dts/ti/k3-j721e-common-proc-board.dts     |  24 +++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  62 ++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 101 +++++++++++++++++-
 4 files changed, 193 insertions(+), 6 deletions(-)
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v3 1/3 dt-bindings: mfd: ti,j721e-system-controller: Add clock property

Add a pattern property for clock-controller, also update the example with a clock-controller node

---
 .../bindings/mfd/ti,j721e-system-controller.yaml     | 12 ++++++++++++
 1 file changed, 12 insertions(+)
Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml +12 -0
index fa86691ebf16..701931996dc2 100644
@@ -48,6 +48,12 @@ patternProperties:
     description:
       This is the SERDES lane control mux.
 
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    description:
+      Clock provider for TI EHRPWM nodes.
+
 required:
   - compatible
   - reg
@@ -79,5 +85,11 @@ examples:
                 <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
                 /* SERDES4 lane0/1/2/3 select */
         };
+
+        clock@4140 {
+            compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+            reg = <0x4140 0x18>;
+            #clock-cells = <1>;
+        };
     };
 ...
Signature · 1 line
2.17.1
author
#2 lore raw

PATCH v3 2/3 arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

In reply to Rahul T R

From: Vijay Pothukuchi <[email protected]>

Add dts nodes for 6 EHRPWM instances on SoC

---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 24 +++++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 62 ++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 24 +++++++
 3 files changed, 109 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +24 -0
index 2bc26a296496..f7d02fa4d6fc 100644
@@ -995,3 +995,27 @@
 &main_mcan13 {
 	status = "disabled";
 };
+
+&main_ehrpwm0 {
+	status = "disabled";
+};
+
+&main_ehrpwm1 {
+	status = "disabled";
+};
+
+&main_ehrpwm2 {
+	status = "disabled";
+};
+
+&main_ehrpwm3 {
+	status = "disabled";
+};
+
+&main_ehrpwm4 {
+	status = "disabled";
+};
+
+&main_ehrpwm5 {
+	status = "disabled";
+};
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +61 -1

68 lines not on this page · raw message

arch/arm64/boot/dts/ti/k3-j721e-sk.dts +24 -0
index 80358cba6954..98a55778f3fe 100644
@@ -1129,3 +1129,27 @@
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
+
+&main_ehrpwm0 {
+	status = "disabled";
+};
+
+&main_ehrpwm1 {
+	status = "disabled";
+};
+
+&main_ehrpwm2 {
+	status = "disabled";
+};
+
+&main_ehrpwm3 {
+	status = "disabled";
+};
+
+&main_ehrpwm4 {
+	status = "disabled";
+};
+
+&main_ehrpwm5 {
+	status = "disabled";
+};
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v3 3/3 arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

In reply to Rahul T R

From: Sinthu Raja <[email protected]>

Add pinmux required to bring out
i2c5, ehrpwm 2 and 3 and gpios on
40 pin RPi header on sk board

---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 89 ++++++++++++++++++++++----
 1 file changed, 78 insertions(+), 11 deletions(-)
arch/arm64/boot/dts/ti/k3-j721e-sk.dts +78 -11
index 98a55778f3fe..b913b18ae133 100644
@@ -400,6 +400,57 @@
 			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
 		>;
 	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01c, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02c, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1b0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1a0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1d0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11c, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19c, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1b4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00c, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
+
+	rpi_header_ehrpwm2_pins_default: rpi-header-ehrpwm2-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x178, PIN_INPUT, 6) /* (U27) RGMII5_RD3.EHRPWM2_A */
+			J721E_IOPAD(0x17c, PIN_INPUT, 6) /* (U24) RGMII5_RD2.EHRPWM2_B */
+		>;
+	};
+
+	rpi_header_ehrpwm3_pins_default: rpi-header-ehrpwm3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x18c, PIN_INPUT, 6) /* (V23) RGMII6_RX_CTL.EHRPWM3_A */
+			J721E_IOPAD(0x190, PIN_INPUT, 6) /* (W23) RGMII6_TD3.EHRPWM3_B */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -631,11 +682,6 @@
 	status = "disabled";
 };
 
-&main_i2c5 {
-	/* Brought out on RPi Header */
-	status = "disabled";
-};
-
 &main_i2c6 {
 	/* Unused */
 	status = "disabled";
@@ -1138,18 +1184,39 @@
 	status = "disabled";
 };
 
-&main_ehrpwm2 {
+&main_ehrpwm4 {
 	status = "disabled";
 };
 
-&main_ehrpwm3 {
+&main_ehrpwm5 {
 	status = "disabled";
 };
 
-&main_ehrpwm4 {
-	status = "disabled";
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
 };
 
-&main_ehrpwm5 {
-	status = "disabled";
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
+};
+
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_ehrpwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_ehrpwm2_pins_default>;
+	status = "okay";
+};
+
+&main_ehrpwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_ehrpwm3_pins_default>;
+	status = "okay";
 };
Signature · 1 line
2.17.1