Skip to content

Enable RPi header on j721e sk

Rahul T R linux-arm-kernel linux-devicetree lkml 8 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v8 Latest2 patches 1 replyApplied
  2. v72 patches 5 repliesSuperseded
  3. v62 patches 2 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v52 patches0 repliesSuperseded
v43 patches7 repliesApplied
v33 patches0 repliesSuperseded
v23 patches3 repliesSuperseded
v13 patches2 repliesSuperseded

Changes in v8 from the cover letter

- Fixed the wraparound scheme in commit messages to 75 characters
- Added explanation in 1 for why the nodes are disabled

Patches in v8 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMsarch/arm64/boot/dts/ti/k3-j721e-main.dtsi+67 -10 replies
2/2arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Headerarch/arm64/boot/dts/ti/k3-j721e-sk.dts+59 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v8 yet.

Read the v8 thread

Cover letter [PATCH v8 0/2] Enable RPi header on j721e sk

The following series of patches enables RPi header on j721e sk. It is a 40 pin io expansion header which brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v8:
- Fixed the wraparound scheme in commit messages to 75 characters
- Added explanation in 1 for why the nodes are disabled

v7:
- Rebased to next-20221103
- Move setting status diable to main dtsi

v6:
- Rebased to 6.1-rc1

v5:
- Enable only gpio's and i2c on the RPi Header
as per the discussion in the v4

v4:
- Correct the node name in dt binding example

v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node

v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property, since $ref is added
- Remove the label in the example
- Fix the indentation in the example

Rahul T R (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs

 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 68 ++++++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts    | 59 ++++++++++++++++++++
 2 files changed, 126 insertions(+), 1 deletion(-)
Signature · 1 line
2.38.0