Skip to contentSkip to conversation

Enable RPi header on j721e sk

PATCH Superseded Rahul T R 2 participants 5 messages Oct 21, 2022 – Nov 3, 2022

Subsystems (2)

v6 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Rahul T R

author
#0 lore raw

v6 cover Enable RPi header on j721e sk

The following series of patches enables RPi header on j721e sk. It is a 40 pin io expasion header which brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v6:
- Rebased to 6.1-rc1

v5:
- Enable only gpio's and i2c on the RPi Header
as per the discussion in the v4

v4:
- Correct the node name in dt binding example

v3:
- Change node name from clock to clock-controller
- Add correct description for clock-controller node

v2:
- Add full path for clock property $ref
- Remove the discription for clock pattern property, since $ref is added
- Remove the label in the example
- Fix the indentation in the example

Sinthu Raja (1):
arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

 .../dts/ti/k3-j721e-common-proc-board.dts     | 24 ++++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 62 ++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 79 ++++++++++++++++++-
 3 files changed, 163 insertions(+), 2 deletions(-)
Signature · 1 line
2.38.0
author
#1 lore raw

PATCH v6 1/2 arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs

From: Vijay Pothukuchi <[email protected]>

Add dts nodes for 6 EHRPWM instances on SoC

---
 .../dts/ti/k3-j721e-common-proc-board.dts     | 24 +++++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 62 ++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 24 +++++++
 3 files changed, 109 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +24 -0
index b1691ac3442d..4f8ab839fbc4 100644
@@ -995,3 +995,27 @@ &main_mcan12 {
 &main_mcan13 {
 	status = "disabled";
 };
+
+&main_ehrpwm0 {
+	status = "disabled";
+};
+
+&main_ehrpwm1 {
+	status = "disabled";
+};
+
+&main_ehrpwm2 {
+	status = "disabled";
+};
+
+&main_ehrpwm3 {
+	status = "disabled";
+};
+
+&main_ehrpwm4 {
+	status = "disabled";
+};
+
+&main_ehrpwm5 {
+	status = "disabled";
+};
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +61 -1

68 lines not on this page · raw message

arch/arm64/boot/dts/ti/k3-j721e-sk.dts +24 -0
index 80358cba6954..98a55778f3fe 100644
@@ -1129,3 +1129,27 @@ &c71_0 {
 	memory-region = <&c71_0_dma_memory_region>,
 			<&c71_0_memory_region>;
 };
+
+&main_ehrpwm0 {
+	status = "disabled";
+};
+
+&main_ehrpwm1 {
+	status = "disabled";
+};
+
+&main_ehrpwm2 {
+	status = "disabled";
+};
+
+&main_ehrpwm3 {
+	status = "disabled";
+};
+
+&main_ehrpwm4 {
+	status = "disabled";
+};
+
+&main_ehrpwm5 {
+	status = "disabled";
+};
Signature · 1 line
2.38.0
author
#2 lore raw

PATCH v6 2/2 arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

In reply to Rahul T R

From: Sinthu Raja <[email protected]>

Add pinmux required to bring out i2c5 and gpios on 40 pin RPi header on sk board

---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 55 +++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-j721e-sk.dts +54 -1
index 98a55778f3fe..a418494d1fd6 100644
@@ -400,6 +400,47 @@ ekey_reset_pins_default: ekey-reset-pns-pins-default {
 			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
 		>;
 	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+			J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */
+			J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */
+			J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */
+			J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -633,7 +674,9 @@ &main_i2c4 {
 
 &main_i2c5 {
 	/* Brought out on RPi Header */
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
 };
 
 &main_i2c6 {
@@ -1153,3 +1196,13 @@ &main_ehrpwm4 {
 &main_ehrpwm5 {
 	status = "disabled";
 };
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
+};
Signature · 1 line
2.38.0
maintainer
#3 lore raw
In reply to Rahul T R
Quoted 6 lines · Rahul T R

The following series of patches enables RPi header on j721e sk. It is a 40 pin io expasion header which brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v6:
- Rebased to 6.1-rc1

Now that the cleanups are in place, we'd need one additional rebase please.

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
author
#4 lore raw

Hi Nishanth,

Quoted 11 lines · Nishanth Menon
Quoted 6 lines · Rahul T R

The following series of patches enables RPi header on j721e sk. It is a 40 pin io expasion header which brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v6:
- Rebased to 6.1-rc1

Now that the cleanups are in place, we'd need one additional rebase please.

I have rebased and sent v7

Regards
Rahul T R

Quoted 4 lines
Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D