Skip to contentSkip to conversation

6.1.53-rc1 review

PATCH In review Greg Kroah-Hartman 17 participants 631 messages Sep 11, 2023 – Oct 10, 2023 Page 2 of 5

Subsystems (13)
lore
Share & tools
lore
author maintainer
#137 lore raw

PATCH 137/600 bpftool: use a local copy of perf_event to fix accessing :: Bpf_cookie

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Lobakin <[email protected]>

[ Upstream commit 4cbeeb0dc02f8ac7b975b2ab0080ace53d43d62a ]

When CONFIG_PERF_EVENTS is not set, struct perf_event remains empty. However, the structure is being used by bpftool indirectly via BTF. This leads to:

skeleton/pid_iter.bpf.c:49:30: error: no member named 'bpf_cookie' in 'struct perf_event'

        return BPF_CORE_READ(event, bpf_cookie);
               ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~

...

skeleton/pid_iter.bpf.c:49:9: error: returning 'void' from a function with incompatible result type '__u64' (aka 'unsigned long long')

        return BPF_CORE_READ(event, bpf_cookie);
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Tools and samples can't use any CONFIG_ definitions, so the fields used there should always be present.
Define struct perf_event___local with the preserve_access_index attribute inside the pid_iter BPF prog to allow compiling on any configs. CO-RE will substitute it with the real struct perf_event accesses later on.

---
 tools/bpf/bpftool/skeleton/pid_iter.bpf.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
tools/bpf/bpftool/skeleton/pid_iter.bpf.c +5 -1
index eb05ea53afb12..e2af8e5fb29ec 100644
@@ -15,6 +15,10 @@ enum bpf_obj_type {
 	BPF_OBJ_BTF,
 };
 
+struct perf_event___local {
+	u64 bpf_cookie;
+} __attribute__((preserve_access_index));
+
 extern const void bpf_link_fops __ksym;
 extern const void bpf_map_fops __ksym;
 extern const void bpf_prog_fops __ksym;
@@ -41,8 +45,8 @@ static __always_inline __u32 get_obj_id(void *ent, enum bpf_obj_type type)
 /* could be used only with BPF_LINK_TYPE_PERF_EVENT links */
 static __u64 get_bpf_cookie(struct bpf_link *link)
 {
+	struct perf_event___local *event;
 	struct bpf_perf_link *perf_link;
-	struct perf_event *event;
 
 	perf_link = container_of(link, struct bpf_perf_link, link);
 	event = BPF_CORE_READ(perf_link, perf_file, private_data);
Signature · 1 line
2.40.1
author maintainer
#138 lore raw

PATCH 138/600 bpftool: Define a local bpf_perf_link to fix accessing its fields

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Lobakin <[email protected]>

[ Upstream commit 67a43462ee2405c94e985a747bdcb8e3a0d66203 ]

When building bpftool with !CONFIG_PERF_EVENTS:

skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link'

        perf_link = container_of(link, struct bpf_perf_link, link);
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:74:22: note: expanded from macro 'container_of'
                ((type *)(__mptr - offsetof(type, member)));    \
                                   ^~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:68:60: note: expanded from macro 'offsetof'
 #define offsetof(TYPE, MEMBER)  ((unsigned long)&((TYPE *)0)->MEMBER)
                                                  ~~~~~~~~~~~^
skeleton/pid_iter.bpf.c:44:9: note: forward declaration of 'struct bpf_perf_link'
        struct bpf_perf_link *perf_link;
               ^

&bpf_perf_link is being defined and used only under the ifdef. Define struct bpf_perf_link___local with the preserve_access_index attribute inside the pid_iter BPF prog to allow compiling on any configs. CO-RE will substitute it with the real struct bpf_perf_link accesses later on.
container_of() uses offsetof(), which does the necessary CO-RE relocation if the field is specified with preserve_access_index - as is the case for struct bpf_perf_link___local.

---
 tools/bpf/bpftool/skeleton/pid_iter.bpf.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
tools/bpf/bpftool/skeleton/pid_iter.bpf.c +7 -2
index e2af8e5fb29ec..3a4c4f7d83d86 100644
@@ -15,6 +15,11 @@ enum bpf_obj_type {
 	BPF_OBJ_BTF,
 };
 
+struct bpf_perf_link___local {
+	struct bpf_link link;
+	struct file *perf_file;
+} __attribute__((preserve_access_index));
+
 struct perf_event___local {
 	u64 bpf_cookie;
 } __attribute__((preserve_access_index));
@@ -45,10 +50,10 @@ static __always_inline __u32 get_obj_id(void *ent, enum bpf_obj_type type)
 /* could be used only with BPF_LINK_TYPE_PERF_EVENT links */
 static __u64 get_bpf_cookie(struct bpf_link *link)
 {
+	struct bpf_perf_link___local *perf_link;
 	struct perf_event___local *event;
-	struct bpf_perf_link *perf_link;
 
-	perf_link = container_of(link, struct bpf_perf_link, link);
+	perf_link = container_of(link, struct bpf_perf_link___local, link);
 	event = BPF_CORE_READ(perf_link, perf_file, private_data);
 	return BPF_CORE_READ(event, bpf_cookie);
 }
Signature · 1 line
2.40.1
author maintainer
#139 lore raw

PATCH 139/600 bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Quentin Monnet <[email protected]>

[ Upstream commit 44ba7b30e84fb40da2295e85a6d209e199fdc977 ]

In order to allow the BPF program in bpftool's pid_iter.bpf.c to compile correctly on hosts where vmlinux.h does not define BPF_LINK_TYPE_PERF_EVENT (running kernel versions lower than 5.15, for example), define and use a local copy of the enum value. This requires LLVM 12 or newer to build the BPF program.

Fixes cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
---
 tools/bpf/bpftool/skeleton/pid_iter.bpf.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
tools/bpf/bpftool/skeleton/pid_iter.bpf.c +9 -2
index 3a4c4f7d83d86..26004f0c5a6ae 100644
@@ -24,6 +24,10 @@ struct perf_event___local {
 	u64 bpf_cookie;
 } __attribute__((preserve_access_index));
 
+enum bpf_link_type___local {
+	BPF_LINK_TYPE_PERF_EVENT___local = 7,
+};
+
 extern const void bpf_link_fops __ksym;
 extern const void bpf_map_fops __ksym;
 extern const void bpf_prog_fops __ksym;
@@ -93,10 +97,13 @@ int iter(struct bpf_iter__task_file *ctx)
 	e.pid = task->tgid;
 	e.id = get_obj_id(file->private_data, obj_type);
 
-	if (obj_type == BPF_OBJ_LINK) {
+	if (obj_type == BPF_OBJ_LINK &&
+	    bpf_core_enum_value_exists(enum bpf_link_type___local,
+				       BPF_LINK_TYPE_PERF_EVENT___local)) {
 		struct bpf_link *link = (struct bpf_link *) file->private_data;
 
-		if (BPF_CORE_READ(link, type) == BPF_LINK_TYPE_PERF_EVENT) {
+		if (link->type == bpf_core_enum_value(enum bpf_link_type___local,
+						      BPF_LINK_TYPE_PERF_EVENT___local)) {
 			e.has_bpf_cookie = true;
 			e.bpf_cookie = get_bpf_cookie(link);
 		}
Signature · 1 line
2.40.1
author maintainer
#140 lore raw

PATCH 140/600 bpftool: Use a local bpf_perf_event_value to fix accessing its fields

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Lobakin <[email protected]>

[ Upstream commit 658ac06801315b739774a15796ff06913ef5cad5 ]

Fix the following error when building bpftool:

CLANG profiler.bpf.o
CLANG pid_iter.bpf.o
skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'

        __uint(value_size, sizeof(struct bpf_perf_event_value));
                           ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
       ^

struct bpf_perf_event_value is being used in the kernel only when CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then. Define struct bpf_perf_event_value___local with the preserve_access_index attribute inside the pid_iter BPF prog to allow compiling on any configs. It is a full mirror of a UAPI structure, so is compatible both with and w/o CO-RE. bpf_perf_event_read_value() requires a pointer of the original type, so a cast is needed.

---
 tools/bpf/bpftool/skeleton/profiler.bpf.c | 27 ++++++++++++++---------
 1 file changed, 17 insertions(+), 10 deletions(-)
tools/bpf/bpftool/skeleton/profiler.bpf.c +17 -10
index ce5b65e07ab10..2f80edc682f11 100644
@@ -4,6 +4,12 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
+struct bpf_perf_event_value___local {
+	__u64 counter;
+	__u64 enabled;
+	__u64 running;
+} __attribute__((preserve_access_index));
+
 /* map of perf event fds, num_cpu * num_metric entries */
 struct {
 	__uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
@@ -15,14 +21,14 @@ struct {
 struct {
 	__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
 	__uint(key_size, sizeof(u32));
-	__uint(value_size, sizeof(struct bpf_perf_event_value));
+	__uint(value_size, sizeof(struct bpf_perf_event_value___local));
 } fentry_readings SEC(".maps");
 
 /* accumulated readings */
 struct {
 	__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
 	__uint(key_size, sizeof(u32));
-	__uint(value_size, sizeof(struct bpf_perf_event_value));
+	__uint(value_size, sizeof(struct bpf_perf_event_value___local));
 } accum_readings SEC(".maps");
 
 /* sample counts, one per cpu */
@@ -39,7 +45,7 @@ const volatile __u32 num_metric = 1;
 SEC("fentry/XXX")
 int BPF_PROG(fentry_XXX)
 {
-	struct bpf_perf_event_value *ptrs[MAX_NUM_MATRICS];
+	struct bpf_perf_event_value___local *ptrs[MAX_NUM_MATRICS];
 	u32 key = bpf_get_smp_processor_id();
 	u32 i;
 
@@ -53,10 +59,10 @@ int BPF_PROG(fentry_XXX)
 	}
 
 	for (i = 0; i < num_metric && i < MAX_NUM_MATRICS; i++) {
-		struct bpf_perf_event_value reading;
+		struct bpf_perf_event_value___local reading;
 		int err;
 
-		err = bpf_perf_event_read_value(&events, key, &reading,
+		err = bpf_perf_event_read_value(&events, key, (void *)&reading,
 						sizeof(reading));
 		if (err)
 			return 0;
@@ -68,14 +74,14 @@ int BPF_PROG(fentry_XXX)
 }
 
 static inline void
-fexit_update_maps(u32 id, struct bpf_perf_event_value *after)
+fexit_update_maps(u32 id, struct bpf_perf_event_value___local *after)
 {
-	struct bpf_perf_event_value *before, diff;
+	struct bpf_perf_event_value___local *before, diff;
 
 	before = bpf_map_lookup_elem(&fentry_readings, &id);
 	/* only account samples with a valid fentry_reading */
 	if (before && before->counter) {
-		struct bpf_perf_event_value *accum;
+		struct bpf_perf_event_value___local *accum;
 
 		diff.counter = after->counter - before->counter;
 		diff.enabled = after->enabled - before->enabled;
@@ -93,7 +99,7 @@ fexit_update_maps(u32 id, struct bpf_perf_event_value *after)
 SEC("fexit/XXX")
 int BPF_PROG(fexit_XXX)
 {
-	struct bpf_perf_event_value readings[MAX_NUM_MATRICS];
+	struct bpf_perf_event_value___local readings[MAX_NUM_MATRICS];
 	u32 cpu = bpf_get_smp_processor_id();
 	u32 i, zero = 0;
 	int err;
@@ -102,7 +108,8 @@ int BPF_PROG(fexit_XXX)
 	/* read all events before updating the maps, to reduce error */
 	for (i = 0; i < num_metric && i < MAX_NUM_MATRICS; i++) {
 		err = bpf_perf_event_read_value(&events, cpu + i * num_cpu,
-						readings + i, sizeof(*readings));
+						(void *)(readings + i),
+						sizeof(*readings));
 		if (err)
 			return 0;
 	}
Signature · 1 line
2.40.1
author maintainer
#141 lore raw

PATCH 141/600 libbpf: Fix realloc API handling in zero-sized edge cases

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrii Nakryiko <[email protected]>

[ Upstream commit 8a0260dbf6553c969248b6530cafadac46562f47 ]

realloc() and reallocarray() can either return NULL or a special non-NULL pointer, if their size argument is zero. This requires a bit more care to handle NULL-as-valid-result situation differently from NULL-as-error case. This has caused real issues before ([0]), and just recently bit again in production when performing bpf_program__attach_usdt().

This patch fixes 4 places that do or potentially could suffer from this mishandling of NULL, including the reported USDT-related one.

There are many other places where realloc()/reallocarray() is used and NULL is always treated as an error value, but all those have guarantees that their size is always non-zero, so those spot don't need any extra handling.

[0] d08ab82f59d5 ("libbpf: Fix double-free when linker processes empty sections")

Fixes 999783c8bbda ("libbpf: Wire up spec management and other arch-independent USDT logic")
Fixes b63b3c490eee ("libbpf: Add bpf_program__set_insns function")
Fixes 697f104db8a6 ("libbpf: Support custom SEC() handlers")
Fixes b12688267280 ("libbpf: Change the order of data and text relocations.")
---
 tools/lib/bpf/libbpf.c | 15 ++++++++++++---
 tools/lib/bpf/usdt.c   |  5 ++++-
 2 files changed, 16 insertions(+), 4 deletions(-)
tools/lib/bpf/libbpf.c +12 -3
index b9a29d1053765..eeb2693128d8a 100644
@@ -6063,7 +6063,11 @@ static int append_subprog_relos(struct bpf_program *main_prog, struct bpf_progra
 	if (main_prog == subprog)
 		return 0;
 	relos = libbpf_reallocarray(main_prog->reloc_desc, new_cnt, sizeof(*relos));
-	if (!relos)
+	/* if new count is zero, reallocarray can return a valid NULL result;
+	 * in this case the previous pointer will be freed, so we *have to*
+	 * reassign old pointer to the new value (even if it's NULL)
+	 */
+	if (!relos && new_cnt)
 		return -ENOMEM;
 	if (subprog->nr_reloc)
 		memcpy(relos + main_prog->nr_reloc, subprog->reloc_desc,
@@ -8345,7 +8349,8 @@ int bpf_program__set_insns(struct bpf_program *prog,
 		return -EBUSY;
 
 	insns = libbpf_reallocarray(prog->insns, new_insn_cnt, sizeof(*insns));
-	if (!insns) {
+	/* NULL is a valid return from reallocarray if the new count is zero */
+	if (!insns && new_insn_cnt) {
 		pr_warn("prog '%s': failed to realloc prog code\n", prog->name);
 		return -ENOMEM;
 	}
@@ -8640,7 +8645,11 @@ int libbpf_unregister_prog_handler(int handler_id)
 
 	/* try to shrink the array, but it's ok if we couldn't */
 	sec_defs = libbpf_reallocarray(custom_sec_defs, custom_sec_def_cnt, sizeof(*sec_defs));
-	if (sec_defs)
+	/* if new count is zero, reallocarray can return a valid NULL result;
+	 * in this case the previous pointer will be freed, so we *have to*
+	 * reassign old pointer to the new value (even if it's NULL)
+	 */
+	if (sec_defs || custom_sec_def_cnt == 0)
 		custom_sec_defs = sec_defs;
 
 	return 0;
tools/lib/bpf/usdt.c +4 -1
index 49f3c3b7f6095..af1cb30556b46 100644
@@ -852,8 +852,11 @@ static int bpf_link_usdt_detach(struct bpf_link *link)
 		 * system is so exhausted on memory, it's the least of user's
 		 * concerns, probably.
 		 * So just do our best here to return those IDs to usdt_manager.
+		 * Another edge case when we can legitimately get NULL is when
+		 * new_cnt is zero, which can happen in some edge cases, so we
+		 * need to be careful about that.
 		 */
-		if (new_free_ids) {
+		if (new_free_ids || new_cnt == 0) {
 			memcpy(new_free_ids + man->free_spec_cnt, usdt_link->spec_ids,
 			       usdt_link->spec_cnt * sizeof(*usdt_link->spec_ids));
 			man->free_spec_ids = new_free_ids;
Signature · 1 line
2.40.1
author maintainer
#142 lore raw

PATCH 142/600 bpf: Clear the probe_addr for uprobe

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yafang Shao <[email protected]>

[ Upstream commit 5125e757e62f6c1d5478db4c2b61a744060ddf3f ]

To avoid returning uninitialized or random values when querying the file descriptor (fd) and accessing probe_addr, it is necessary to clear the variable prior to its use.

---
 include/linux/trace_events.h | 3 ++-
 kernel/trace/bpf_trace.c     | 2 +-
 kernel/trace/trace_uprobe.c  | 3 ++-
 3 files changed, 5 insertions(+), 3 deletions(-)
include/linux/trace_events.h +2 -1
index 04c59f8d801f1..422f4ca656cf9 100644
@@ -863,7 +863,8 @@ extern int  perf_uprobe_init(struct perf_event *event,
 extern void perf_uprobe_destroy(struct perf_event *event);
 extern int bpf_get_uprobe_info(const struct perf_event *event,
 			       u32 *fd_type, const char **filename,
-			       u64 *probe_offset, bool perf_type_tracepoint);
+			       u64 *probe_offset, u64 *probe_addr,
+			       bool perf_type_tracepoint);
 #endif
 extern int  ftrace_profile_set_filter(struct perf_event *event, int event_id,
 				     char *filter_str);
kernel/trace/bpf_trace.c +1 -1
index ad04390883ada..9fc5db194027b 100644
@@ -2390,7 +2390,7 @@ int bpf_get_perf_event_info(const struct perf_event *event, u32 *prog_id,
 #ifdef CONFIG_UPROBE_EVENTS
 		if (flags & TRACE_EVENT_FL_UPROBE)
 			err = bpf_get_uprobe_info(event, fd_type, buf,
-						  probe_offset,
+						  probe_offset, probe_addr,
 						  event->attr.type == PERF_TYPE_TRACEPOINT);
 #endif
 	}
kernel/trace/trace_uprobe.c +2 -1
index 2ac06a642863a..127c78aec17db 100644
@@ -1418,7 +1418,7 @@ static void uretprobe_perf_func(struct trace_uprobe *tu, unsigned long func,
 
 int bpf_get_uprobe_info(const struct perf_event *event, u32 *fd_type,
 			const char **filename, u64 *probe_offset,
-			bool perf_type_tracepoint)
+			u64 *probe_addr, bool perf_type_tracepoint)
 {
 	const char *pevent = trace_event_name(event->tp_event);
 	const char *group = event->tp_event->class->system;
@@ -1435,6 +1435,7 @@ int bpf_get_uprobe_info(const struct perf_event *event, u32 *fd_type,
 				    : BPF_FD_TYPE_UPROBE;
 	*filename = tu->filename;
 	*probe_offset = tu->offset;
+	*probe_addr = 0;
 	return 0;
 }
 #endif	/* CONFIG_PERF_EVENTS */
Signature · 1 line
2.40.1
author maintainer
#143 lore raw

PATCH 143/600 bpf: Fix an error in verifying a field in a union

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yafang Shao <[email protected]>

[ Upstream commit 33937607efa050d9e237e0c4ac4ada02d961c466 ]

We are utilizing BPF LSM to monitor BPF operations within our container environment. When we add support for raw_tracepoint, it hits below error.

; (const void *)attr->raw_tracepoint.name);
27: (79) r3 = *(u64 *)(r2 +0)
access beyond the end of member map_type (mend:4) in struct (anon) with off 0 size 8

It can be reproduced with below BPF prog.

SEC("lsm/bpf")
int BPF_PROG(bpf_audit, int cmd, union bpf_attr *attr, unsigned int size)

{
	switch (cmd) {
	case BPF_RAW_TRACEPOINT_OPEN:
		bpf_printk("raw_tracepoint is %s", attr->raw_tracepoint.name);
		break;
	default:
		break;
	}
	return 0;
}

The reason is that when accessing a field in a union, such as bpf_attr, if the field is located within a nested struct that is not the first member of the union, it can result in incorrect field verification.

  union bpf_attr {
      struct {
          __u32 map_type; <<<< Actually it will find that field.
          __u32 key_size;
          __u32 value_size;
         ...
      };
      ...
      struct {
          __u64 name;    <<<< We want to verify this field.
          __u32 prog_fd;
      } raw_tracepoint;
  };

Considering the potential deep nesting levels, finding a perfect solution to address this issue has proven challenging. Therefore, I propose a solution where we simply skip the verification process if the field in question is located within a union.

Fixes 7e3617a72df3 ("bpf: Add array support to btf_struct_access")
---
 kernel/bpf/btf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/bpf/btf.c +1 -1
index fb78bb26786fc..7582ec4fd4131 100644
@@ -5788,7 +5788,7 @@ static int btf_struct_walk(struct bpf_verifier_log *log, const struct btf *btf,
 		 * that also allows using an array of int as a scratch
 		 * space. e.g. skb->cb[].
 		 */
-		if (off + size > mtrue_end) {
+		if (off + size > mtrue_end && !(*flag & PTR_UNTRUSTED)) {
 			bpf_log(log,
 				"access beyond the end of member %s (mend:%u) in struct %s with off %u size %u\n",
 				mname, mtrue_end, tname, off, size);
Signature · 1 line
2.40.1
author maintainer
#144 lore raw

PATCH 144/600 crypto: qat - change value of default idle filter

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Giovanni Cabiddu <[email protected]>

[ Upstream commit 0f942bdfe9d463be3073301519492f8d53c6b2d5 ]

The power management configuration of 4xxx devices is too aggressive and in some conditions the device might be prematurely put to a low power state.
Increase the idle filter value to prevent that.
In future, this will be set by firmware.

Fixes e5745f34113b ("crypto: qat - enable power management for QAT GEN4")
---
 drivers/crypto/qat/qat_common/adf_gen4_pm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/crypto/qat/qat_common/adf_gen4_pm.h +1 -1
index f8f8a9ee29e5b..db4326933d1c0 100644
@@ -35,7 +35,7 @@
 #define ADF_GEN4_PM_MSG_PENDING			BIT(0)
 #define ADF_GEN4_PM_MSG_PAYLOAD_BIT_MASK	GENMASK(28, 1)
 
-#define ADF_GEN4_PM_DEFAULT_IDLE_FILTER		(0x0)
+#define ADF_GEN4_PM_DEFAULT_IDLE_FILTER		(0x6)
 #define ADF_GEN4_PM_MAX_IDLE_FILTER		(0x7)
 
 int adf_gen4_enable_pm(struct adf_accel_dev *accel_dev);
Signature · 1 line
2.40.1
author maintainer
#145 lore raw

PATCH 145/600 tcp: tcp_enter_quickack_mode() should be static

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 03b123debcbc8db987bda17ed8412cc011064c22 ]

After commit d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP"), tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c.

Fixes d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP")
Cc Yuchung Cheng <[email protected]>
Cc Neal Cardwell <[email protected]>
---
 include/net/tcp.h    | 1 -
 net/ipv4/tcp_input.c | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)
include/net/tcp.h +0 -1
index e9c8f88f47696..5fd69f2342a44 100644
@@ -355,7 +355,6 @@ ssize_t tcp_splice_read(struct socket *sk, loff_t *ppos,
 struct sk_buff *tcp_stream_alloc_skb(struct sock *sk, int size, gfp_t gfp,
 				     bool force_schedule);
 
-void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks);
 static inline void tcp_dec_quickack_mode(struct sock *sk,
 					 const unsigned int pkts)
 {
net/ipv4/tcp_input.c +1 -2
index e2d3ea2e34561..c697836f2b5b4 100644
@@ -287,7 +287,7 @@ static void tcp_incr_quickack(struct sock *sk, unsigned int max_quickacks)
 		icsk->icsk_ack.quick = quickacks;
 }
 
-void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks)
+static void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks)
 {
 	struct inet_connection_sock *icsk = inet_csk(sk);
 
@@ -295,7 +295,6 @@ void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks)
 	inet_csk_exit_pingpong_mode(sk);
 	icsk->icsk_ack.ato = TCP_ATO_MIN;
 }
-EXPORT_SYMBOL(tcp_enter_quickack_mode);
 
 /* Send ACKs quickly, if "quick" count is not exhausted
  * and the session is not interactive.
Signature · 1 line
2.40.1
author maintainer
#146 lore raw

PATCH 146/600 hwrng: nomadik - keep clock enabled while hwrng is registered

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Martin Kaiser <[email protected]>

[ Upstream commit 039980de89dc9dd757418d6f296e4126cc3f86c3 ]

The nomadik driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called.

However, nomadik's clock is disabled in the remove function. There's a short timeframe where nomadik is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core.

Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition.

Fixes 3e75241be808 ("hwrng: drivers - Use device-managed registration API")
---
 drivers/char/hw_random/nomadik-rng.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/char/hw_random/nomadik-rng.c +3 -9
index e8f9621e79541..3774adf903a83 100644
@@ -13,8 +13,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-static struct clk *rng_clk;
-
 static int nmk_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
 {
 	void __iomem *base = (void __iomem *)rng->priv;
@@ -36,21 +34,20 @@ static struct hwrng nmk_rng = {
 
 static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
 {
+	struct clk *rng_clk;
 	void __iomem *base;
 	int ret;
 
-	rng_clk = devm_clk_get(&dev->dev, NULL);
+	rng_clk = devm_clk_get_enabled(&dev->dev, NULL);
 	if (IS_ERR(rng_clk)) {
 		dev_err(&dev->dev, "could not get rng clock\n");
 		ret = PTR_ERR(rng_clk);
 		return ret;
 	}
 
-	clk_prepare_enable(rng_clk);
-
 	ret = amba_request_regions(dev, dev->dev.init_name);
 	if (ret)
-		goto out_clk;
+		return ret;
 	ret = -ENOMEM;
 	base = devm_ioremap(&dev->dev, dev->res.start,
 			    resource_size(&dev->res));
@@ -64,15 +61,12 @@ static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id)
 
 out_release:
 	amba_release_regions(dev);
-out_clk:
-	clk_disable_unprepare(rng_clk);
 	return ret;
 }
 
 static void nmk_rng_remove(struct amba_device *dev)
 {
 	amba_release_regions(dev);
-	clk_disable_unprepare(rng_clk);
 }
 
 static const struct amba_id nmk_rng_ids[] = {
Signature · 1 line
2.40.1
author maintainer
#147 lore raw

PATCH 147/600 hwrng: pic32 - use devm_clk_get_enabled

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Martin Kaiser <[email protected]>

[ Upstream commit 6755ad74aac0fb1c79b14724feb81b2f6ff25847 ]

Use devm_clk_get_enabled in the pic32 driver. Ensure that the clock is enabled as long as the driver is registered with the hwrng core.

Fixes 7ea39973d1e5 ("hwrng: pic32 - Use device-managed registration API")
---
 drivers/char/hw_random/pic32-rng.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)
drivers/char/hw_random/pic32-rng.c +5 -14
index 99c8bd0859a14..e04a054e89307 100644
@@ -36,7 +36,6 @@
 struct pic32_rng {
 	void __iomem	*base;
 	struct hwrng	rng;
-	struct clk	*clk;
 };
 
 /*
@@ -70,6 +69,7 @@ static int pic32_rng_read(struct hwrng *rng, void *buf, size_t max,
 static int pic32_rng_probe(struct platform_device *pdev)
 {
 	struct pic32_rng *priv;
+	struct clk *clk;
 	u32 v;
 	int ret;
 
@@ -81,13 +81,9 @@ static int pic32_rng_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
-
-	ret = clk_prepare_enable(priv->clk);
-	if (ret)
-		return ret;
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
 
 	/* enable TRNG in enhanced mode */
 	v = TRNGEN | TRNGMOD;
@@ -98,15 +94,11 @@ static int pic32_rng_probe(struct platform_device *pdev)
 
 	ret = devm_hwrng_register(&pdev->dev, &priv->rng);
 	if (ret)
-		goto err_register;
+		return ret;
 
 	platform_set_drvdata(pdev, priv);
 
 	return 0;
-
-err_register:
-	clk_disable_unprepare(priv->clk);
-	return ret;
 }
 
 static int pic32_rng_remove(struct platform_device *pdev)
@@ -114,7 +106,6 @@ static int pic32_rng_remove(struct platform_device *pdev)
 	struct pic32_rng *rng = platform_get_drvdata(pdev);
 
 	writel(0, rng->base + RNGCON);
-	clk_disable_unprepare(rng->clk);
 	return 0;
 }
 
Signature · 1 line
2.40.1
author maintainer
#148 lore raw

PATCH 148/600 regmap: rbtree: Use alloc_flags for memory allocations

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[ Upstream commit 0c8b0bf42c8cef56f7cd9cd876fbb7ece9217064 ]

The kunit tests discovered a sleeping in atomic bug. The allocations in the regcache-rbtree code should use the map->alloc_flags instead of GFP_KERNEL.

[    5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[    5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[    5.006219] preempt_count: 1, expected: 0
[    5.006414] 1 lock held by kunit_try_catch/117:
[    5.006590]  #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[    5.007493] irq event stamp: 162
[    5.007627] hardirqs last  enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[    5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[    5.008119] softirqs last  enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[    5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[    5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G                 N 6.4.4-rc3-g0e8d2fdfb188 #1
[    5.009011] Hardware name: Generic DT based system
[    5.009277]  unwind_backtrace from show_stack+0x18/0x1c
[    5.009497]  show_stack from dump_stack_lvl+0x38/0x5c
[    5.009676]  dump_stack_lvl from __might_resched+0x188/0x2d0
[    5.009860]  __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[    5.010061]  __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[    5.010254]  kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[    5.010446]  regcache_rbtree_write from _regmap_write+0x88/0x140
[    5.010634]  _regmap_write from regmap_write+0x44/0x68
[    5.010803]  regmap_write from basic_read_write+0x8c/0x270
[    5.010980]  basic_read_write from kunit_try_run_case+0x48/0xa0
---
 drivers/base/regmap/regcache-rbtree.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/base/regmap/regcache-rbtree.c +5 -5
index fabf87058d80b..ae6b8788d5f3f 100644
@@ -277,7 +277,7 @@ static int regcache_rbtree_insert_to_block(struct regmap *map,
 
 	blk = krealloc(rbnode->block,
 		       blklen * map->cache_word_size,
-		       GFP_KERNEL);
+		       map->alloc_flags);
 	if (!blk)
 		return -ENOMEM;
 
@@ -286,7 +286,7 @@ static int regcache_rbtree_insert_to_block(struct regmap *map,
 	if (BITS_TO_LONGS(blklen) > BITS_TO_LONGS(rbnode->blklen)) {
 		present = krealloc(rbnode->cache_present,
 				   BITS_TO_LONGS(blklen) * sizeof(*present),
-				   GFP_KERNEL);
+				   map->alloc_flags);
 		if (!present)
 			return -ENOMEM;
 
@@ -320,7 +320,7 @@ regcache_rbtree_node_alloc(struct regmap *map, unsigned int reg)
 	const struct regmap_range *range;
 	int i;
 
-	rbnode = kzalloc(sizeof(*rbnode), GFP_KERNEL);
+	rbnode = kzalloc(sizeof(*rbnode), map->alloc_flags);
 	if (!rbnode)
 		return NULL;
 
@@ -346,13 +346,13 @@ regcache_rbtree_node_alloc(struct regmap *map, unsigned int reg)
 	}
 
 	rbnode->block = kmalloc_array(rbnode->blklen, map->cache_word_size,
-				      GFP_KERNEL);
+				      map->alloc_flags);
 	if (!rbnode->block)
 		goto err_free;
 
 	rbnode->cache_present = kcalloc(BITS_TO_LONGS(rbnode->blklen),
 					sizeof(*rbnode->cache_present),
-					GFP_KERNEL);
+					map->alloc_flags);
 	if (!rbnode->cache_present)
 		goto err_free_block;
 
Signature · 1 line
2.40.1
author maintainer
#149 lore raw

PATCH 149/600 wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhang Shurong <[email protected]>

[ Upstream commit 59b4cc439f184c5eaa34161ec67af1e16ffabed4 ]

If there is a failure during kstrtobool_from_user() rtw89_debug_priv_btc_manual_set should return a negative error code instead of returning the count directly.

Fix this bug by returning an error code instead of a count after a failed call of the function "kstrtobool_from_user". Moreover I omitted the label "out" with this source code correction.

---
 drivers/net/wireless/realtek/rtw89/debug.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/net/wireless/realtek/rtw89/debug.c +5 -3
index ec0af903961f0..3a8fe60d0bb7b 100644
@@ -2302,12 +2302,14 @@ static ssize_t rtw89_debug_priv_btc_manual_set(struct file *filp,
 	struct rtw89_dev *rtwdev = debugfs_priv->rtwdev;
 	struct rtw89_btc *btc = &rtwdev->btc;
 	bool btc_manual;
+	int ret;
 
-	if (kstrtobool_from_user(user_buf, count, &btc_manual))
-		goto out;
+	ret = kstrtobool_from_user(user_buf, count, &btc_manual);
+	if (ret)
+		return ret;
 
 	btc->ctrl.manual = btc_manual;
-out:
+
 	return count;
 }
 
Signature · 1 line
2.40.1
author maintainer
#150 lore raw

PATCH 150/600 wifi: mt76: mt7921: fix non-PSC channel scan fail

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ming Yen Hsieh <[email protected]>

[ Upstream commit 0e5911bb7cc92c00dda9b4d635c1266b7ca915c6 ]

Due to the scan command may only request legacy bands and PSC channel in 6GHz band, we are unable to scan the APs on non-PSC channel in this case. Enable WIPHY_FLAG_SPLIT_SCAN_6GHZ to support non-PSC channel (obtained during scan on legacy bands) in 6GHz scan request.

Fixes 50ac15a511e3 ("mt76: mt7921: add 6GHz support")
---
 drivers/net/wireless/mediatek/mt76/mt7921/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7921/init.c +2 -1
index 4ad66b3443838..c997b8d3ea590 100644
@@ -80,7 +80,8 @@ mt7921_init_wiphy(struct ieee80211_hw *hw)
 	wiphy->max_sched_scan_ssids = MT76_CONNAC_MAX_SCHED_SCAN_SSID;
 	wiphy->max_match_sets = MT76_CONNAC_MAX_SCAN_MATCH;
 	wiphy->max_sched_scan_reqs = 1;
-	wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
+	wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH |
+			WIPHY_FLAG_SPLIT_SCAN_6GHZ;
 	wiphy->reg_notifier = mt7921_regd_notifier;
 
 	wiphy->features |= NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR |
Signature · 1 line
2.40.1
author maintainer
#151 lore raw

PATCH 151/600 udp: re-score reuseport groups when connected sockets are present

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenz Bauer <[email protected]>

[ Upstream commit f0ea27e7bfe1c34e1f451a63eb68faa1d4c3a86d ]

Contrary to TCP, UDP reuseport groups can contain TCP_ESTABLISHED sockets. To support these properly we remember whether a group has a connected socket and skip the fast reuseport early-return. In effect we continue scoring all reuseport sockets and then choose the one with the highest score.

The current code fails to re-calculate the score for the result of lookup_reuseport. According to Kuniyuki Iwashima:

1) SO_INCOMING_CPU is set
-> selected sk might have +1 score

2) BPF prog returns ESTABLISHED and/or SO_INCOMING_CPU sk -> selected sk will have more than 8

Using the old score could trigger more lookups depending on the order that sockets are created.

    sk -> sk (SO_INCOMING_CPU) -> sk (ESTABLISHED)
    |     |
    `-> select the next SO_INCOMING_CPU sk
          |
          `-> select itself (We should save this lookup)
---
 net/ipv4/udp.c | 20 +++++++++++++++-----
 net/ipv6/udp.c | 19 ++++++++++++++-----
 2 files changed, 29 insertions(+), 10 deletions(-)
net/ipv4/udp.c +15 -5
index 956d6797c76f3..42c1f7d9a980a 100644
@@ -445,14 +445,24 @@ static struct sock *udp4_lib_lookup2(struct net *net,
 		score = compute_score(sk, net, saddr, sport,
 				      daddr, hnum, dif, sdif);
 		if (score > badness) {
-			result = lookup_reuseport(net, sk, skb,
-						  saddr, sport, daddr, hnum);
+			badness = score;
+			result = lookup_reuseport(net, sk, skb, saddr, sport, daddr, hnum);
+			if (!result) {
+				result = sk;
+				continue;
+			}
+
 			/* Fall back to scoring if group has connections */
-			if (result && !reuseport_has_conns(sk))
+			if (!reuseport_has_conns(sk))
 				return result;
 
-			result = result ? : sk;
-			badness = score;
+			/* Reuseport logic returned an error, keep original score. */
+			if (IS_ERR(result))
+				continue;
+
+			badness = compute_score(result, net, saddr, sport,
+						daddr, hnum, dif, sdif);
+
 		}
 	}
 	return result;
net/ipv6/udp.c +14 -5
index 27348172b25b9..64b36c2ba774a 100644
@@ -193,14 +193,23 @@ static struct sock *udp6_lib_lookup2(struct net *net,
 		score = compute_score(sk, net, saddr, sport,
 				      daddr, hnum, dif, sdif);
 		if (score > badness) {
-			result = lookup_reuseport(net, sk, skb,
-						  saddr, sport, daddr, hnum);
+			badness = score;
+			result = lookup_reuseport(net, sk, skb, saddr, sport, daddr, hnum);
+			if (!result) {
+				result = sk;
+				continue;
+			}
+
 			/* Fall back to scoring if group has connections */
-			if (result && !reuseport_has_conns(sk))
+			if (!reuseport_has_conns(sk))
 				return result;
 
-			result = result ? : sk;
-			badness = score;
+			/* Reuseport logic returned an error, keep original score. */
+			if (IS_ERR(result))
+				continue;
+
+			badness = compute_score(sk, net, saddr, sport,
+						daddr, hnum, dif, sdif);
 		}
 	}
 	return result;
Signature · 1 line
2.40.1
author maintainer
#152 lore raw

PATCH 152/600 bpf: reject unhashed sockets in bpf_sk_assign

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenz Bauer <[email protected]>

[ Upstream commit 67312adc96b5a585970d03b62412847afe2c6b01 ]

The semantics for bpf_sk_assign are as follows:

sk = some_lookup_func()
bpf_sk_assign(skb, sk)
bpf_sk_release(sk)

That is, the sk is not consumed by bpf_sk_assign. The function therefore needs to make sure that sk lives long enough to be consumed from __inet_lookup_skb. The path through the stack for a TCPv4 packet is roughly:

netif_receive_skb_core: takes RCU read lock

    __netif_receive_skb_core:
      sch_handle_ingress:
        tcf_classify:
          bpf_sk_assign()
      deliver_ptype_list_skb:
        deliver_skb:
          ip_packet_type->func == ip_rcv:
            ip_rcv_core:
            ip_rcv_finish_core:
              dst_input:
                ip_local_deliver:
                  ip_local_deliver_finish:
                    ip_protocol_deliver_rcu:
                      tcp_v4_rcv:
                        __inet_lookup_skb:
                          skb_steal_sock

The existing helper takes advantage of the fact that everything happens in the same RCU critical section: for sockets with SOCK_RCU_FREE set bpf_sk_assign never takes a reference. skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put if necessary.

This approach assumes that SOCK_RCU_FREE is never set on a sk between bpf_sk_assign and skb_steal_sock, but this invariant is violated by unhashed UDP sockets. A new UDP socket is created in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only added in udp_lib_get_port() which happens when a socket is bound.

When bpf_sk_assign was added it wasn't possible to access unhashed UDP sockets from BPF, so this wasn't a problem. This changed in commit 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets"), but the helper wasn't adjusted accordingly. The following sequence of events will therefore lead to a refcount leak:

1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.
2. Pull socket out of sockmap and bpf_sk_assign it. Since SOCK_RCU_FREE is not set we increment the refcount.
3. bind() or connect() the socket, setting SOCK_RCU_FREE.
4. skb_steal_sock will now set refcounted = false due to SOCK_RCU_FREE.
5. tcp_v4_rcv() skips sock_put().

Fix the problem by rejecting unhashed sockets in bpf_sk_assign(). This matches the behaviour of __inet_lookup_skb which is ultimately the goal of bpf_sk_assign().

---
 net/core/filter.c | 2 ++
 1 file changed, 2 insertions(+)
net/core/filter.c +2 -0
index 419ce7c61bd6b..9fd7c88b5db4e 100644
@@ -7259,6 +7259,8 @@ BPF_CALL_3(bpf_sk_assign, struct sk_buff *, skb, struct sock *, sk, u64, flags)
 		return -ENETUNREACH;
 	if (unlikely(sk_fullsock(sk) && sk->sk_reuseport))
 		return -ESOCKTNOSUPPORT;
+	if (sk_unhashed(sk))
+		return -EOPNOTSUPP;
 	if (sk_is_refcounted(sk) &&
 	    unlikely(!refcount_inc_not_zero(&sk->sk_refcnt)))
 		return -ENOENT;
Signature · 1 line
2.40.1
author maintainer
#153 lore raw

PATCH 153/600 net: export inet_lookup_reuseport and inet6_lookup_reuseport

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenz Bauer <[email protected]>

[ Upstream commit ce796e60b3b196b61fcc565df195443cbb846ef0 ]

Rename the existing reuseport helpers for IPv4 and IPv6 so that they can be invoked in the follow up commit. Export them so that building DCCP and IPv6 as a module works.

No change in functionality.

Stable-dep-of: 9c02bec95954 ("bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign")

---
 include/net/inet6_hashtables.h |  7 +++++++
 include/net/inet_hashtables.h  |  5 +++++
 net/ipv4/inet_hashtables.c     | 15 ++++++++-------
 net/ipv6/inet6_hashtables.c    | 19 ++++++++++---------
 4 files changed, 30 insertions(+), 16 deletions(-)
include/net/inet6_hashtables.h +7 -0
index 56f1286583d3c..032ddab48f8f8 100644
@@ -48,6 +48,13 @@ struct sock *__inet6_lookup_established(struct net *net,
 					const u16 hnum, const int dif,
 					const int sdif);
 
+struct sock *inet6_lookup_reuseport(struct net *net, struct sock *sk,
+				    struct sk_buff *skb, int doff,
+				    const struct in6_addr *saddr,
+				    __be16 sport,
+				    const struct in6_addr *daddr,
+				    unsigned short hnum);
+
 struct sock *inet6_lookup_listener(struct net *net,
 				   struct inet_hashinfo *hashinfo,
 				   struct sk_buff *skb, int doff,
include/net/inet_hashtables.h +5 -0
index 99bd823e97f62..8734f3488f5d0 100644
@@ -379,6 +379,11 @@ struct sock *__inet_lookup_established(struct net *net,
 				       const __be32 daddr, const u16 hnum,
 				       const int dif, const int sdif);
 
+struct sock *inet_lookup_reuseport(struct net *net, struct sock *sk,
+				   struct sk_buff *skb, int doff,
+				   __be32 saddr, __be16 sport,
+				   __be32 daddr, unsigned short hnum);
+
 static inline struct sock *
 	inet_lookup_established(struct net *net, struct inet_hashinfo *hashinfo,
 				const __be32 saddr, const __be16 sport,
net/ipv4/inet_hashtables.c +8 -7
index c19b462662ad0..6ed92624c95c4 100644
@@ -332,10 +332,10 @@ static inline int compute_score(struct sock *sk, struct net *net,
 	return score;
 }
 
-static inline struct sock *lookup_reuseport(struct net *net, struct sock *sk,
-					    struct sk_buff *skb, int doff,
-					    __be32 saddr, __be16 sport,
-					    __be32 daddr, unsigned short hnum)
+struct sock *inet_lookup_reuseport(struct net *net, struct sock *sk,
+				   struct sk_buff *skb, int doff,
+				   __be32 saddr, __be16 sport,
+				   __be32 daddr, unsigned short hnum)
 {
 	struct sock *reuse_sk = NULL;
 	u32 phash;
@@ -346,6 +346,7 @@ static inline struct sock *lookup_reuseport(struct net *net, struct sock *sk,
 	}
 	return reuse_sk;
 }
+EXPORT_SYMBOL_GPL(inet_lookup_reuseport);
 
 /*
  * Here are some nice properties to exploit here. The BSD API
@@ -369,8 +370,8 @@ static struct sock *inet_lhash2_lookup(struct net *net,
 	sk_nulls_for_each_rcu(sk, node, &ilb2->nulls_head) {
 		score = compute_score(sk, net, hnum, daddr, dif, sdif);
 		if (score > hiscore) {
-			result = lookup_reuseport(net, sk, skb, doff,
-						  saddr, sport, daddr, hnum);
+			result = inet_lookup_reuseport(net, sk, skb, doff,
+						       saddr, sport, daddr, hnum);
 			if (result)
 				return result;
 
@@ -399,7 +400,7 @@ static inline struct sock *inet_lookup_run_bpf(struct net *net,
 	if (no_reuseport || IS_ERR_OR_NULL(sk))
 		return sk;
 
-	reuse_sk = lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
+	reuse_sk = inet_lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
 	if (reuse_sk)
 		sk = reuse_sk;
 	return sk;
net/ipv6/inet6_hashtables.c +10 -9
index b64b49012655e..b7c56867314ed 100644
@@ -111,12 +111,12 @@ static inline int compute_score(struct sock *sk, struct net *net,
 	return score;
 }
 
-static inline struct sock *lookup_reuseport(struct net *net, struct sock *sk,
-					    struct sk_buff *skb, int doff,
-					    const struct in6_addr *saddr,
-					    __be16 sport,
-					    const struct in6_addr *daddr,
-					    unsigned short hnum)
+struct sock *inet6_lookup_reuseport(struct net *net, struct sock *sk,
+				    struct sk_buff *skb, int doff,
+				    const struct in6_addr *saddr,
+				    __be16 sport,
+				    const struct in6_addr *daddr,
+				    unsigned short hnum)
 {
 	struct sock *reuse_sk = NULL;
 	u32 phash;
@@ -127,6 +127,7 @@ static inline struct sock *lookup_reuseport(struct net *net, struct sock *sk,
 	}
 	return reuse_sk;
 }
+EXPORT_SYMBOL_GPL(inet6_lookup_reuseport);
 
 /* called with rcu_read_lock() */
 static struct sock *inet6_lhash2_lookup(struct net *net,
@@ -143,8 +144,8 @@ static struct sock *inet6_lhash2_lookup(struct net *net,
 	sk_nulls_for_each_rcu(sk, node, &ilb2->nulls_head) {
 		score = compute_score(sk, net, hnum, daddr, dif, sdif);
 		if (score > hiscore) {
-			result = lookup_reuseport(net, sk, skb, doff,
-						  saddr, sport, daddr, hnum);
+			result = inet6_lookup_reuseport(net, sk, skb, doff,
+							saddr, sport, daddr, hnum);
 			if (result)
 				return result;
 
@@ -175,7 +176,7 @@ static inline struct sock *inet6_lookup_run_bpf(struct net *net,
 	if (no_reuseport || IS_ERR_OR_NULL(sk))
 		return sk;
 
-	reuse_sk = lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
+	reuse_sk = inet6_lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
 	if (reuse_sk)
 		sk = reuse_sk;
 	return sk;
Signature · 1 line
2.40.1
author maintainer
#154 lore raw

PATCH 154/600 net: remove duplicate reuseport_lookup functions

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenz Bauer <[email protected]>

[ Upstream commit 0f495f7617229772403e683033abc473f0f0553c ]

There are currently four copies of reuseport_lookup: one each for (TCP, UDP)x(IPv4, IPv6). This forces us to duplicate all callers of those functions as well. This is already the case for sk_lookup helpers (inet,inet6,udp4,udp6)_lookup_run_bpf.

There are two differences between the reuseport_lookup helpers:

1. They call different hash functions depending on protocol
2. UDP reuseport_lookup checks that sk_state != TCP_ESTABLISHED

Move the check for sk_state into the caller and use the INDIRECT_CALL infrastructure to cut down the helpers to one per IP version.

Stable-dep-of: 9c02bec95954 ("bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign")

---
 include/net/inet6_hashtables.h | 11 ++++++++-
 include/net/inet_hashtables.h  | 15 ++++++++-----
 net/ipv4/inet_hashtables.c     | 20 +++++++++++------
 net/ipv4/udp.c                 | 34 +++++++++++-----------------
 net/ipv6/inet6_hashtables.c    | 14 ++++++++----
 net/ipv6/udp.c                 | 41 +++++++++++++---------------------
 6 files changed, 72 insertions(+), 63 deletions(-)
include/net/inet6_hashtables.h +10 -1
index 032ddab48f8f8..f89320b6fee31 100644
@@ -48,12 +48,21 @@ struct sock *__inet6_lookup_established(struct net *net,
 					const u16 hnum, const int dif,
 					const int sdif);
 
+typedef u32 (inet6_ehashfn_t)(const struct net *net,
+			       const struct in6_addr *laddr, const u16 lport,
+			       const struct in6_addr *faddr, const __be16 fport);
+
+inet6_ehashfn_t inet6_ehashfn;
+
+INDIRECT_CALLABLE_DECLARE(inet6_ehashfn_t udp6_ehashfn);
+
 struct sock *inet6_lookup_reuseport(struct net *net, struct sock *sk,
 				    struct sk_buff *skb, int doff,
 				    const struct in6_addr *saddr,
 				    __be16 sport,
 				    const struct in6_addr *daddr,
-				    unsigned short hnum);
+				    unsigned short hnum,
+				    inet6_ehashfn_t *ehashfn);
 
 struct sock *inet6_lookup_listener(struct net *net,
 				   struct inet_hashinfo *hashinfo,
include/net/inet_hashtables.h +10 -5
index 8734f3488f5d0..ddfa2e67fdb51 100644
@@ -379,10 +379,19 @@ struct sock *__inet_lookup_established(struct net *net,
 				       const __be32 daddr, const u16 hnum,
 				       const int dif, const int sdif);
 
+typedef u32 (inet_ehashfn_t)(const struct net *net,
+			      const __be32 laddr, const __u16 lport,
+			      const __be32 faddr, const __be16 fport);
+
+inet_ehashfn_t inet_ehashfn;
+
+INDIRECT_CALLABLE_DECLARE(inet_ehashfn_t udp_ehashfn);
+
 struct sock *inet_lookup_reuseport(struct net *net, struct sock *sk,
 				   struct sk_buff *skb, int doff,
 				   __be32 saddr, __be16 sport,
-				   __be32 daddr, unsigned short hnum);
+				   __be32 daddr, unsigned short hnum,
+				   inet_ehashfn_t *ehashfn);
 
 static inline struct sock *
 	inet_lookup_established(struct net *net, struct inet_hashinfo *hashinfo,
@@ -453,10 +462,6 @@ static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo,
 			     refcounted);
 }
 
-u32 inet6_ehashfn(const struct net *net,
-		  const struct in6_addr *laddr, const u16 lport,
-		  const struct in6_addr *faddr, const __be16 fport);
-
 static inline void sk_daddr_set(struct sock *sk, __be32 addr)
 {
 	sk->sk_daddr = addr; /* alias of inet_daddr */
net/ipv4/inet_hashtables.c +13 -7
index 6ed92624c95c4..970da5b2bfe9c 100644
@@ -28,9 +28,9 @@
 #include <net/tcp.h>
 #include <net/sock_reuseport.h>
 
-static u32 inet_ehashfn(const struct net *net, const __be32 laddr,
-			const __u16 lport, const __be32 faddr,
-			const __be16 fport)
+u32 inet_ehashfn(const struct net *net, const __be32 laddr,
+		 const __u16 lport, const __be32 faddr,
+		 const __be16 fport)
 {
 	static u32 inet_ehash_secret __read_mostly;
 
@@ -39,6 +39,7 @@ static u32 inet_ehashfn(const struct net *net, const __be32 laddr,
 	return __inet_ehashfn(laddr, lport, faddr, fport,
 			      inet_ehash_secret + net_hash_mix(net));
 }
+EXPORT_SYMBOL_GPL(inet_ehashfn);
 
 /* This function handles inet_sock, but also timewait and request sockets
  * for IPv4/IPv6.
@@ -332,16 +333,20 @@ static inline int compute_score(struct sock *sk, struct net *net,
 	return score;
 }
 
+INDIRECT_CALLABLE_DECLARE(inet_ehashfn_t udp_ehashfn);
+
 struct sock *inet_lookup_reuseport(struct net *net, struct sock *sk,
 				   struct sk_buff *skb, int doff,
 				   __be32 saddr, __be16 sport,
-				   __be32 daddr, unsigned short hnum)
+				   __be32 daddr, unsigned short hnum,
+				   inet_ehashfn_t *ehashfn)
 {
 	struct sock *reuse_sk = NULL;
 	u32 phash;
 
 	if (sk->sk_reuseport) {
-		phash = inet_ehashfn(net, daddr, hnum, saddr, sport);
+		phash = INDIRECT_CALL_2(ehashfn, udp_ehashfn, inet_ehashfn,
+					net, daddr, hnum, saddr, sport);
 		reuse_sk = reuseport_select_sock(sk, phash, skb, doff);
 	}
 	return reuse_sk;
@@ -371,7 +376,7 @@ static struct sock *inet_lhash2_lookup(struct net *net,
 		score = compute_score(sk, net, hnum, daddr, dif, sdif);
 		if (score > hiscore) {
 			result = inet_lookup_reuseport(net, sk, skb, doff,
-						       saddr, sport, daddr, hnum);
+						       saddr, sport, daddr, hnum, inet_ehashfn);
 			if (result)
 				return result;
 
@@ -400,7 +405,8 @@ static inline struct sock *inet_lookup_run_bpf(struct net *net,
 	if (no_reuseport || IS_ERR_OR_NULL(sk))
 		return sk;
 
-	reuse_sk = inet_lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
+	reuse_sk = inet_lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum,
+					 inet_ehashfn);
 	if (reuse_sk)
 		sk = reuse_sk;
 	return sk;
net/ipv4/udp.c +13 -21
index 42c1f7d9a980a..87686c9e4efca 100644
@@ -400,9 +400,9 @@ static int compute_score(struct sock *sk, struct net *net,
 	return score;
 }
 
-static u32 udp_ehashfn(const struct net *net, const __be32 laddr,
-		       const __u16 lport, const __be32 faddr,
-		       const __be16 fport)
+INDIRECT_CALLABLE_SCOPE
+u32 udp_ehashfn(const struct net *net, const __be32 laddr, const __u16 lport,
+		const __be32 faddr, const __be16 fport)
 {
 	static u32 udp_ehash_secret __read_mostly;
 
@@ -412,22 +412,6 @@ static u32 udp_ehashfn(const struct net *net, const __be32 laddr,
 			      udp_ehash_secret + net_hash_mix(net));
 }
 
-static struct sock *lookup_reuseport(struct net *net, struct sock *sk,
-				     struct sk_buff *skb,
-				     __be32 saddr, __be16 sport,
-				     __be32 daddr, unsigned short hnum)
-{
-	struct sock *reuse_sk = NULL;
-	u32 hash;
-
-	if (sk->sk_reuseport && sk->sk_state != TCP_ESTABLISHED) {
-		hash = udp_ehashfn(net, daddr, hnum, saddr, sport);
-		reuse_sk = reuseport_select_sock(sk, hash, skb,
-						 sizeof(struct udphdr));
-	}
-	return reuse_sk;
-}
-
 /* called with rcu_read_lock() */
 static struct sock *udp4_lib_lookup2(struct net *net,
 				     __be32 saddr, __be16 sport,
@@ -446,7 +430,14 @@ static struct sock *udp4_lib_lookup2(struct net *net,
 				      daddr, hnum, dif, sdif);
 		if (score > badness) {
 			badness = score;
-			result = lookup_reuseport(net, sk, skb, saddr, sport, daddr, hnum);
+
+			if (sk->sk_state == TCP_ESTABLISHED) {
+				result = sk;
+				continue;
+			}
+
+			result = inet_lookup_reuseport(net, sk, skb, sizeof(struct udphdr),
+						       saddr, sport, daddr, hnum, udp_ehashfn);
 			if (!result) {
 				result = sk;
 				continue;
@@ -485,7 +476,8 @@ static struct sock *udp4_lookup_run_bpf(struct net *net,
 	if (no_reuseport || IS_ERR_OR_NULL(sk))
 		return sk;
 
-	reuse_sk = lookup_reuseport(net, sk, skb, saddr, sport, daddr, hnum);
+	reuse_sk = inet_lookup_reuseport(net, sk, skb, sizeof(struct udphdr),
+					 saddr, sport, daddr, hnum, udp_ehashfn);
 	if (reuse_sk)
 		sk = reuse_sk;
 	return sk;
net/ipv6/inet6_hashtables.c +10 -4
index b7c56867314ed..3616225c89ef6 100644
@@ -39,6 +39,7 @@ u32 inet6_ehashfn(const struct net *net,
 	return __inet6_ehashfn(lhash, lport, fhash, fport,
 			       inet6_ehash_secret + net_hash_mix(net));
 }
+EXPORT_SYMBOL_GPL(inet6_ehashfn);
 
 /*
  * Sockets in TCP_CLOSE state are _always_ taken out of the hash, so
@@ -111,18 +112,22 @@ static inline int compute_score(struct sock *sk, struct net *net,
 	return score;
 }
 
+INDIRECT_CALLABLE_DECLARE(inet6_ehashfn_t udp6_ehashfn);
+
 struct sock *inet6_lookup_reuseport(struct net *net, struct sock *sk,
 				    struct sk_buff *skb, int doff,
 				    const struct in6_addr *saddr,
 				    __be16 sport,
 				    const struct in6_addr *daddr,
-				    unsigned short hnum)
+				    unsigned short hnum,
+				    inet6_ehashfn_t *ehashfn)
 {
 	struct sock *reuse_sk = NULL;
 	u32 phash;
 
 	if (sk->sk_reuseport) {
-		phash = inet6_ehashfn(net, daddr, hnum, saddr, sport);
+		phash = INDIRECT_CALL_INET(ehashfn, udp6_ehashfn, inet6_ehashfn,
+					   net, daddr, hnum, saddr, sport);
 		reuse_sk = reuseport_select_sock(sk, phash, skb, doff);
 	}
 	return reuse_sk;
@@ -145,7 +150,7 @@ static struct sock *inet6_lhash2_lookup(struct net *net,
 		score = compute_score(sk, net, hnum, daddr, dif, sdif);
 		if (score > hiscore) {
 			result = inet6_lookup_reuseport(net, sk, skb, doff,
-							saddr, sport, daddr, hnum);
+							saddr, sport, daddr, hnum, inet6_ehashfn);
 			if (result)
 				return result;
 
@@ -176,7 +181,8 @@ static inline struct sock *inet6_lookup_run_bpf(struct net *net,
 	if (no_reuseport || IS_ERR_OR_NULL(sk))
 		return sk;
 
-	reuse_sk = inet6_lookup_reuseport(net, sk, skb, doff, saddr, sport, daddr, hnum);
+	reuse_sk = inet6_lookup_reuseport(net, sk, skb, doff,
+					  saddr, sport, daddr, hnum, inet6_ehashfn);
 	if (reuse_sk)
 		sk = reuse_sk;
 	return sk;
net/ipv6/udp.c +16 -25

65 lines not on this page · raw message

Signature · 1 line
2.40.1
author maintainer
#155 lore raw

PATCH 155/600 bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenz Bauer <[email protected]>

[ Upstream commit 9c02bec95954252c3c01bfbb3f7560e0b95ca955 ]

Currently the bpf_sk_assign helper in tc BPF context refuses SO_REUSEPORT sockets. This means we can't use the helper to steer traffic to Envoy, which configures SO_REUSEPORT on its sockets. In turn, we're blocked from removing TPROXY from our setup.

The reason that bpf_sk_assign refuses such sockets is that the bpf_sk_lookup helpers don't execute SK_REUSEPORT programs. Instead, one of the reuseport sockets is selected by hash. This could cause dispatch to the "wrong" socket:

sk = bpf_sk_lookup_tcp(...) // select SO_REUSEPORT by hash bpf_sk_assign(skb, sk) // SK_REUSEPORT wasn't executed

Fixing this isn't as simple as invoking SK_REUSEPORT from the lookup helpers unfortunately. In the tc context, L2 headers are at the start of the skb, while SK_REUSEPORT expects L3 headers instead.

Instead, we execute the SK_REUSEPORT program when the assigned socket is pulled out of the skb, further up the stack. This creates some trickiness with regards to refcounting as bpf_sk_assign will put both refcounted and RCU freed sockets in skb->sk. reuseport sockets are RCU freed. We can infer that the sk_assigned socket is RCU freed if the reuseport lookup succeeds, but convincing yourself of this fact isn't straight forward. Therefore we defensively check refcounting on the sk_assign sock even though it's probably not required in practice.

---
 include/net/inet6_hashtables.h | 56 +++++++++++++++++++++++++++++++---
 include/net/inet_hashtables.h  | 49 +++++++++++++++++++++++++++--
 include/net/sock.h             |  7 +++--
 include/uapi/linux/bpf.h       |  3 --
 net/core/filter.c              |  2 --
 net/ipv4/udp.c                 |  8 +++--
 net/ipv6/udp.c                 |  8 +++--
 tools/include/uapi/linux/bpf.h |  3 --
 8 files changed, 115 insertions(+), 21 deletions(-)
include/net/inet6_hashtables.h +51 -5
index f89320b6fee31..475e672b4facc 100644
@@ -94,6 +94,46 @@ static inline struct sock *__inet6_lookup(struct net *net,
 				     daddr, hnum, dif, sdif);
 }
 
+static inline
+struct sock *inet6_steal_sock(struct net *net, struct sk_buff *skb, int doff,
+			      const struct in6_addr *saddr, const __be16 sport,
+			      const struct in6_addr *daddr, const __be16 dport,
+			      bool *refcounted, inet6_ehashfn_t *ehashfn)
+{
+	struct sock *sk, *reuse_sk;
+	bool prefetched;
+
+	sk = skb_steal_sock(skb, refcounted, &prefetched);
+	if (!sk)
+		return NULL;
+
+	if (!prefetched)
+		return sk;
+
+	if (sk->sk_protocol == IPPROTO_TCP) {
+		if (sk->sk_state != TCP_LISTEN)
+			return sk;
+	} else if (sk->sk_protocol == IPPROTO_UDP) {
+		if (sk->sk_state != TCP_CLOSE)
+			return sk;
+	} else {
+		return sk;
+	}
+
+	reuse_sk = inet6_lookup_reuseport(net, sk, skb, doff,
+					  saddr, sport, daddr, ntohs(dport),
+					  ehashfn);
+	if (!reuse_sk)
+		return sk;
+
+	/* We've chosen a new reuseport sock which is never refcounted. This
+	 * implies that sk also isn't refcounted.
+	 */
+	WARN_ON_ONCE(*refcounted);
+
+	return reuse_sk;
+}
+
 static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo,
 					      struct sk_buff *skb, int doff,
 					      const __be16 sport,
@@ -101,14 +141,20 @@ static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo,
 					      int iif, int sdif,
 					      bool *refcounted)
 {
-	struct sock *sk = skb_steal_sock(skb, refcounted);
-
+	struct net *net = dev_net(skb_dst(skb)->dev);
+	const struct ipv6hdr *ip6h = ipv6_hdr(skb);
+	struct sock *sk;
+
+	sk = inet6_steal_sock(net, skb, doff, &ip6h->saddr, sport, &ip6h->daddr, dport,
+			      refcounted, inet6_ehashfn);
+	if (IS_ERR(sk))
+		return NULL;
 	if (sk)
 		return sk;
 
-	return __inet6_lookup(dev_net(skb_dst(skb)->dev), hashinfo, skb,
-			      doff, &ipv6_hdr(skb)->saddr, sport,
-			      &ipv6_hdr(skb)->daddr, ntohs(dport),
+	return __inet6_lookup(net, hashinfo, skb,
+			      doff, &ip6h->saddr, sport,
+			      &ip6h->daddr, ntohs(dport),
 			      iif, sdif, refcounted);
 }
 
include/net/inet_hashtables.h +47 -2

66 lines not on this page · raw message

include/net/sock.h +5 -2
index d1f936ed97556..3a8b2cc23b914 100644
@@ -2852,20 +2852,23 @@ sk_is_refcounted(struct sock *sk)
  * skb_steal_sock - steal a socket from an sk_buff
  * @skb: sk_buff to steal the socket from
  * @refcounted: is set to true if the socket is reference-counted
+ * @prefetched: is set to true if the socket was assigned from bpf
  */
 static inline struct sock *
-skb_steal_sock(struct sk_buff *skb, bool *refcounted)
+skb_steal_sock(struct sk_buff *skb, bool *refcounted, bool *prefetched)
 {
 	if (skb->sk) {
 		struct sock *sk = skb->sk;
 
 		*refcounted = true;
-		if (skb_sk_is_prefetched(skb))
+		*prefetched = skb_sk_is_prefetched(skb);
+		if (*prefetched)
 			*refcounted = sk_is_refcounted(sk);
 		skb->destructor = NULL;
 		skb->sk = NULL;
 		return sk;
 	}
+	*prefetched = false;
 	*refcounted = false;
 	return NULL;
 }
include/uapi/linux/bpf.h +0 -3
index 51b9aa640ad2a..1304bec5c97a0 100644
@@ -4079,9 +4079,6 @@ union bpf_attr {
  *		**-EOPNOTSUPP** if the operation is not supported, for example
  *		a call from outside of TC ingress.
  *
- *		**-ESOCKTNOSUPPORT** if the socket type is not supported
- *		(reuseport).
- *
  * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags)
  *	Description
  *		Helper is overloaded depending on BPF program type. This
net/core/filter.c +0 -2
index 9fd7c88b5db4e..ccc97d54d9a8b 100644
@@ -7257,8 +7257,6 @@ BPF_CALL_3(bpf_sk_assign, struct sk_buff *, skb, struct sock *, sk, u64, flags)
 		return -EOPNOTSUPP;
 	if (unlikely(dev_net(skb->dev) != sock_net(sk)))
 		return -ENETUNREACH;
-	if (unlikely(sk_fullsock(sk) && sk->sk_reuseport))
-		return -ESOCKTNOSUPPORT;
 	if (sk_unhashed(sk))
 		return -EOPNOTSUPP;
 	if (sk_is_refcounted(sk) &&
net/ipv4/udp.c +6 -2
index 87686c9e4efca..58c2f8df5fd70 100644
@@ -2442,7 +2442,11 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	if (udp4_csum_init(skb, uh, proto))
 		goto csum_error;
 
-	sk = skb_steal_sock(skb, &refcounted);
+	sk = inet_steal_sock(net, skb, sizeof(struct udphdr), saddr, uh->source, daddr, uh->dest,
+			     &refcounted, udp_ehashfn);
+	if (IS_ERR(sk))
+		goto no_sk;
+
 	if (sk) {
 		struct dst_entry *dst = skb_dst(skb);
 		int ret;
@@ -2463,7 +2467,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 	sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
 	if (sk)
 		return udp_unicast_rcv_skb(sk, skb, uh);
-
+no_sk:
 	if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
 		goto drop;
 	nf_reset_ct(skb);
net/ipv6/udp.c +6 -2
index 3408376b1863b..91b757066c935 100644
@@ -983,7 +983,11 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 		goto csum_error;
 
 	/* Check if the socket is already available, e.g. due to early demux */
-	sk = skb_steal_sock(skb, &refcounted);
+	sk = inet6_steal_sock(net, skb, sizeof(struct udphdr), saddr, uh->source, daddr, uh->dest,
+			      &refcounted, udp6_ehashfn);
+	if (IS_ERR(sk))
+		goto no_sk;
+
 	if (sk) {
 		struct dst_entry *dst = skb_dst(skb);
 		int ret;
@@ -1017,7 +1021,7 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
 			goto report_csum_error;
 		return udp6_unicast_rcv_skb(sk, skb, uh);
 	}
-
+no_sk:
 	reason = SKB_DROP_REASON_NO_SOCKET;
 
 	if (!uh->check)
tools/include/uapi/linux/bpf.h +0 -3
index 51b9aa640ad2a..1304bec5c97a0 100644
@@ -4079,9 +4079,6 @@ union bpf_attr {
  *		**-EOPNOTSUPP** if the operation is not supported, for example
  *		a call from outside of TC ingress.
  *
- *		**-ESOCKTNOSUPPORT** if the socket type is not supported
- *		(reuseport).
- *
  * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags)
  *	Description
  *		Helper is overloaded depending on BPF program type. This
Signature · 1 line
2.40.1
author maintainer
#156 lore raw

PATCH 156/600 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lin Ma <[email protected]>

[ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ]

It seems that the nla_policy in mt76_tm_policy is missed for attribute MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make sure the

  u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]);

in function mt76_testmode_cmd() is safe and will not result in out-of-attribute read.

Fixes f0efa8621550 ("mt76: add API for testmode support")
---
 drivers/net/wireless/mediatek/mt76/testmode.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/mediatek/mt76/testmode.c +1 -0
index 0accc71a91c9a..4644dace9bb34 100644
@@ -8,6 +8,7 @@ const struct nla_policy mt76_tm_policy[NUM_MT76_TM_ATTRS] = {
 	[MT76_TM_ATTR_RESET] = { .type = NLA_FLAG },
 	[MT76_TM_ATTR_STATE] = { .type = NLA_U8 },
 	[MT76_TM_ATTR_TX_COUNT] = { .type = NLA_U32 },
+	[MT76_TM_ATTR_TX_LENGTH] = { .type = NLA_U32 },
 	[MT76_TM_ATTR_TX_RATE_MODE] = { .type = NLA_U8 },
 	[MT76_TM_ATTR_TX_RATE_NSS] = { .type = NLA_U8 },
 	[MT76_TM_ATTR_TX_RATE_IDX] = { .type = NLA_U8 },
Signature · 1 line
2.40.1
author maintainer
#157 lore raw

PATCH 157/600 spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhang Shurong <[email protected]>

[ Upstream commit 29a449e765ff70a5bd533be94babb6d36985d096 ]

The platform_get_irq might be failed and return a negative result. So there should have an error handling code.

Fixed this by adding an error handling code.

Fixes 8528547bcc33 ("spi: tegra: add spi driver for sflash controller")
---
 drivers/spi/spi-tegra20-sflash.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/spi/spi-tegra20-sflash.c +5 -1
index 220ee08c4a06c..d4bebb4314172 100644
@@ -455,7 +455,11 @@ static int tegra_sflash_probe(struct platform_device *pdev)
 		goto exit_free_master;
 	}
 
-	tsd->irq = platform_get_irq(pdev, 0);
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto exit_free_master;
+	tsd->irq = ret;
+
 	ret = request_irq(tsd->irq, tegra_sflash_isr, 0,
 			dev_name(&pdev->dev), tsd);
 	if (ret < 0) {
Signature · 1 line
2.40.1
author maintainer
#158 lore raw

PATCH 158/600 can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marc Kleine-Budde <[email protected]>

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ]

In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented.

Fix this by first incrementing the error counters and then allocate the skb.

Fixes d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
---
 drivers/net/can/usb/gs_usb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/can/usb/gs_usb.c +3 -2
index 5858cbafbc965..264a0f764e011 100644
@@ -626,6 +626,9 @@ static void gs_usb_receive_bulk_callback(struct urb *urb)
 	}
 
 	if (hf->flags & GS_CAN_FLAG_OVERFLOW) {
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+
 		skb = alloc_can_err_skb(netdev, &cf);
 		if (!skb)
 			goto resubmit_urb;
@@ -633,8 +636,6 @@ static void gs_usb_receive_bulk_callback(struct urb *urb)
 		cf->can_id |= CAN_ERR_CRTL;
 		cf->len = CAN_ERR_DLC;
 		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
-		stats->rx_over_errors++;
-		stats->rx_errors++;
 		netif_rx(skb);
 	}
 
Signature · 1 line
2.40.1
author maintainer
#159 lore raw

PATCH 159/600 wifi: mt76: mt7915: fix power-limits while chan_switch

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryder Lee <[email protected]>

[ Upstream commit 6c0570bc21ec2073890aa252c8420ca7bec402e4 ]

If user changes the channel without completely disabling the interface the txpower_sku values reported track the old channel the device was operating on. If user bounces the interface the correct power tables are applied.

mt7915_sku_group_len array gets updated before the channel switch happens so it uses data from the old channel.

Fixes ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting")
Fixes f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support")
---
 drivers/net/wireless/mediatek/mt76/mt7915/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7915/main.c +2 -1
index bda26bd62412e..3280843ea8566 100644
@@ -455,7 +455,8 @@ static int mt7915_config(struct ieee80211_hw *hw, u32 changed)
 		ieee80211_wake_queues(hw);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+	if (changed & (IEEE80211_CONF_CHANGE_POWER |
+		       IEEE80211_CONF_CHANGE_CHANNEL)) {
 		ret = mt7915_mcu_set_txpower_sku(phy);
 		if (ret)
 			return ret;
Signature · 1 line
2.40.1
author maintainer
#160 lore raw

PATCH 160/600 wifi: mwifiex: Fix OOB and integer underflow when rx packets

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Polaris Pi <[email protected]>

[ Upstream commit 11958528161731c58e105b501ed60b83a91ea941 ]

Make sure mwifiex_process_mgmt_packet, mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet, mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet not out-of-bounds access the skb->data buffer.

Fixes 2dbaf751b1de ("mwifiex: report received management frames to cfg80211")
---
 drivers/net/wireless/marvell/mwifiex/sta_rx.c | 11 ++++++++++-
 .../net/wireless/marvell/mwifiex/uap_txrx.c   | 19 +++++++++++++++++++
 drivers/net/wireless/marvell/mwifiex/util.c   | 10 +++++++---
 3 files changed, 36 insertions(+), 4 deletions(-)
drivers/net/wireless/marvell/mwifiex/sta_rx.c +10 -1
index 13659b02ba882..f2899d53a43f9 100644
@@ -86,6 +86,14 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv,
 	rx_pkt_len = le16_to_cpu(local_rx_pd->rx_pkt_length);
 	rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_off;
 
+	if (sizeof(*rx_pkt_hdr) + rx_pkt_off > skb->len) {
+		mwifiex_dbg(priv->adapter, ERROR,
+			    "wrong rx packet offset: len=%d, rx_pkt_off=%d\n",
+			    skb->len, rx_pkt_off);
+		priv->stats.rx_dropped++;
+		dev_kfree_skb_any(skb);
+	}
+
 	if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
 		     sizeof(bridge_tunnel_header))) ||
 	    (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
@@ -194,7 +202,8 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
 
 	rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_offset;
 
-	if ((rx_pkt_offset + rx_pkt_length) > (u16) skb->len) {
+	if ((rx_pkt_offset + rx_pkt_length) > skb->len ||
+	    sizeof(rx_pkt_hdr->eth803_hdr) + rx_pkt_offset > skb->len) {
 		mwifiex_dbg(adapter, ERROR,
 			    "wrong rx packet: len=%d, rx_pkt_offset=%d, rx_pkt_length=%d\n",
 			    skb->len, rx_pkt_offset, rx_pkt_length);
drivers/net/wireless/marvell/mwifiex/uap_txrx.c +19 -0
index e495f7eaea033..04ff051f5d186 100644
@@ -103,6 +103,15 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,
 		return;
 	}
 
+	if (sizeof(*rx_pkt_hdr) +
+	    le16_to_cpu(uap_rx_pd->rx_pkt_offset) > skb->len) {
+		mwifiex_dbg(adapter, ERROR,
+			    "wrong rx packet offset: len=%d,rx_pkt_offset=%d\n",
+			    skb->len, le16_to_cpu(uap_rx_pd->rx_pkt_offset));
+		priv->stats.rx_dropped++;
+		dev_kfree_skb_any(skb);
+	}
+
 	if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
 		     sizeof(bridge_tunnel_header))) ||
 	    (!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
@@ -367,6 +376,16 @@ int mwifiex_process_uap_rx_packet(struct mwifiex_private *priv,
 	rx_pkt_type = le16_to_cpu(uap_rx_pd->rx_pkt_type);
 	rx_pkt_hdr = (void *)uap_rx_pd + le16_to_cpu(uap_rx_pd->rx_pkt_offset);
 
+	if (le16_to_cpu(uap_rx_pd->rx_pkt_offset) +
+	    sizeof(rx_pkt_hdr->eth803_hdr) > skb->len) {
+		mwifiex_dbg(adapter, ERROR,
+			    "wrong rx packet for struct ethhdr: len=%d, offset=%d\n",
+			    skb->len, le16_to_cpu(uap_rx_pd->rx_pkt_offset));
+		priv->stats.rx_dropped++;
+		dev_kfree_skb_any(skb);
+		return 0;
+	}
+
 	ether_addr_copy(ta, rx_pkt_hdr->eth803_hdr.h_source);
 
 	if ((le16_to_cpu(uap_rx_pd->rx_pkt_offset) +
drivers/net/wireless/marvell/mwifiex/util.c +7 -3
index 94c2d219835da..745b1d925b217 100644
@@ -393,11 +393,15 @@ mwifiex_process_mgmt_packet(struct mwifiex_private *priv,
 	}
 
 	rx_pd = (struct rxpd *)skb->data;
+	pkt_len = le16_to_cpu(rx_pd->rx_pkt_length);
+	if (pkt_len < sizeof(struct ieee80211_hdr) + sizeof(pkt_len)) {
+		mwifiex_dbg(priv->adapter, ERROR, "invalid rx_pkt_length");
+		return -1;
+	}
 
 	skb_pull(skb, le16_to_cpu(rx_pd->rx_pkt_offset));
 	skb_pull(skb, sizeof(pkt_len));
-
-	pkt_len = le16_to_cpu(rx_pd->rx_pkt_length);
+	pkt_len -= sizeof(pkt_len);
 
 	ieee_hdr = (void *)skb->data;
 	if (ieee80211_is_mgmt(ieee_hdr->frame_control)) {
@@ -410,7 +414,7 @@ mwifiex_process_mgmt_packet(struct mwifiex_private *priv,
 		skb->data + sizeof(struct ieee80211_hdr),
 		pkt_len - sizeof(struct ieee80211_hdr));
 
-	pkt_len -= ETH_ALEN + sizeof(pkt_len);
+	pkt_len -= ETH_ALEN;
 	rx_pd->rx_pkt_length = cpu_to_le16(pkt_len);
 
 	cfg80211_rx_mgmt(&priv->wdev, priv->roc_cfg.chan.center_freq,
Signature · 1 line
2.40.1
author maintainer
#161 lore raw

PATCH 161/600 wifi: mwifiex: fix error recovery in PCIE buffer descriptor management

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <[email protected]>

[ Upstream commit 288c63d5cb4667a51a04668b3e2bb0ea499bc5f4 ]

Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do 'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should be released with 'dma_free_coherent()'. The latter is performed in 'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)' 'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'.

Fixes d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset")
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 25 ++++++++++++++-------
 1 file changed, 17 insertions(+), 8 deletions(-)
drivers/net/wireless/marvell/mwifiex/pcie.c +17 -8
index 9a698a16a8f38..6697132ecc977 100644
@@ -189,6 +189,8 @@ static int mwifiex_pcie_probe_of(struct device *dev)
 }
 
 static void mwifiex_pcie_work(struct work_struct *work);
+static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter);
+static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter);
 
 static int
 mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
@@ -792,14 +794,15 @@ static int mwifiex_init_rxq_ring(struct mwifiex_adapter *adapter)
 		if (!skb) {
 			mwifiex_dbg(adapter, ERROR,
 				    "Unable to allocate skb for RX ring.\n");
-			kfree(card->rxbd_ring_vbase);
 			return -ENOMEM;
 		}
 
 		if (mwifiex_map_pci_memory(adapter, skb,
 					   MWIFIEX_RX_DATA_BUF_SIZE,
-					   DMA_FROM_DEVICE))
-			return -1;
+					   DMA_FROM_DEVICE)) {
+			kfree_skb(skb);
+			return -ENOMEM;
+		}
 
 		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
@@ -849,7 +852,6 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
 		if (!skb) {
 			mwifiex_dbg(adapter, ERROR,
 				    "Unable to allocate skb for EVENT buf.\n");
-			kfree(card->evtbd_ring_vbase);
 			return -ENOMEM;
 		}
 		skb_put(skb, MAX_EVENT_SIZE);
@@ -857,8 +859,7 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
 		if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE,
 					   DMA_FROM_DEVICE)) {
 			kfree_skb(skb);
-			kfree(card->evtbd_ring_vbase);
-			return -1;
+			return -ENOMEM;
 		}
 
 		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
@@ -1058,6 +1059,7 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter)
  */
 static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter)
 {
+	int ret;
 	struct pcie_service_card *card = adapter->card;
 	const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
 
@@ -1096,7 +1098,10 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter)
 		    (u32)((u64)card->rxbd_ring_pbase >> 32),
 		    card->rxbd_ring_size);
 
-	return mwifiex_init_rxq_ring(adapter);
+	ret = mwifiex_init_rxq_ring(adapter);
+	if (ret)
+		mwifiex_pcie_delete_rxbd_ring(adapter);
+	return ret;
 }
 
 /*
@@ -1127,6 +1132,7 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter)
  */
 static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter)
 {
+	int ret;
 	struct pcie_service_card *card = adapter->card;
 	const struct mwifiex_pcie_card_reg *reg = card->pcie.reg;
 
@@ -1161,7 +1167,10 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter)
 		    (u32)((u64)card->evtbd_ring_pbase >> 32),
 		    card->evtbd_ring_size);
 
-	return mwifiex_pcie_init_evt_ring(adapter);
+	ret = mwifiex_pcie_init_evt_ring(adapter);
+	if (ret)
+		mwifiex_pcie_delete_evtbd_ring(adapter);
+	return ret;
 }
 
 /*
Signature · 1 line
2.40.1
author maintainer
#162 lore raw

PATCH 162/600 selftests/bpf: fix static assert compilation issue for test_cls_*.c

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Maguire <[email protected]>

[ Upstream commit 416c6d01244ecbf0abfdb898fd091b50ef951b48 ]

commit bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE")

...was backported to stable trees such as 5.15. The problem is that with older LLVM/clang (14/15) - which is often used for older kernels - we see compilation failures in BPF selftests now:

In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression

        sizeof(flow_ports_t) !=
        ^~~~~~~~~~~~~~~~~~~~~~~

progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv4.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'

        (offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
         ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
                                 ^
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression
        sizeof(flow_ports_t) !=
        ^~~~~~~~~~~~~~~~~~~~~~~

progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv6.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'

        (offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
         ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
                                 ^

2 errors generated.
make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1

The problem is the new offsetof() does not play nice with static asserts. Given that the context is a static assert (and CO-RE relocation is not needed at compile time), offsetof() usage can be replaced by restoring the original offsetof() definition as __builtin_offsetof().

---
 tools/testing/selftests/bpf/progs/test_cls_redirect.h | 9 +++++++++
 1 file changed, 9 insertions(+)
tools/testing/selftests/bpf/progs/test_cls_redirect.h +9 -0
index 76eab0aacba0c..233b089d1fbac 100644
@@ -12,6 +12,15 @@
 #include <linux/ipv6.h>
 #include <linux/udp.h>
 
+/* offsetof() is used in static asserts, and the libbpf-redefined CO-RE
+ * friendly version breaks compilation for older clang versions <= 15
+ * when invoked in a static assert.  Restore original here.
+ */
+#ifdef offsetof
+#undef offsetof
+#define offsetof(type, member) __builtin_offsetof(type, member)
+#endif
+
 struct gre_base_hdr {
 	uint16_t flags;
 	uint16_t protocol;
Signature · 1 line
2.40.1
author maintainer
#163 lore raw

PATCH 163/600 kbuild: rust_is_available: remove -v option

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masahiro Yamada <[email protected]>

[ Upstream commit d824d2f98565e7c4cb1b862c230198fbe1a968be ]

The -v option is passed when this script is invoked from Makefile, but not when invoked from Kconfig.

As you can see in scripts/Kconfig.include, the 'success' macro suppresses stdout and stderr anyway, so this script does not need to be quiet.

Stable-dep-of: dee3a6b819c9 ("kbuild: rust_is_available: fix version check when CC has multiple arguments")

---
 Makefile                     |  4 +-
 scripts/rust_is_available.sh | 96 +++++++++++++++---------------------
 2 files changed, 42 insertions(+), 58 deletions(-)
Makefile +2 -2
index 82aaa3ae7395b..c627e0bdb19f9 100644
@@ -1291,7 +1291,7 @@ prepare0: archprepare
 # All the preparing..
 prepare: prepare0
 ifdef CONFIG_RUST
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
 	$(Q)$(MAKE) $(build)=rust
 endif
 
@@ -1817,7 +1817,7 @@ $(DOC_TARGETS):
 # "Is Rust available?" target
 PHONY += rustavailable
 rustavailable:
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh -v && echo "Rust is available!"
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!"
 
 # Documentation target
 #
scripts/rust_is_available.sh +40 -56

146 lines not on this page · raw message

Signature · 1 line
2.40.1
author maintainer
#164 lore raw

PATCH 164/600 kbuild: rust_is_available: fix version check when CC has multiple arguments

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Russell Currey <[email protected]>

[ Upstream commit dee3a6b819c96fc8b1907577f585fd66f5c0fefe ]

rust_is_available.sh uses cc-version.sh to identify which C compiler is in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to be able to handle multiple arguments in one variable, i.e. "ccache clang". Its invocation in rust_is_available.sh quotes "$CC", which makes $1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.

cc-version.sh could also be changed to handle having "ccache clang" as one argument, but it only has the one consumer upstream, making it simpler to fix the caller here.

Fixes 78521f3399ab ("scripts: add `rust_is_available.sh`")
[ Reworded title prefix and reflow line to 75 columns. ]
---
 scripts/rust_is_available.sh | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
scripts/rust_is_available.sh +2 -2
index f43a010eaf305..0c9be438e4cd3 100755
@@ -113,10 +113,10 @@ fi
 #
 # In the future, we might be able to perform a full version check, see
 # https://github.com/rust-lang/rust-bindgen/issues/2138.
-cc_name=$($(dirname $0)/cc-version.sh "$CC" | cut -f1 -d' ')
+cc_name=$($(dirname $0)/cc-version.sh $CC | cut -f1 -d' ')
 if [ "$cc_name" = Clang ]; then
 	clang_version=$( \
-		LC_ALL=C "$CC" --version 2>/dev/null \
+		LC_ALL=C $CC --version 2>/dev/null \
 			| sed -nE '1s:.*version ([0-9]+\.[0-9]+\.[0-9]+).*:\1:p'
 	)
 	if [ "$clang_version" != "$bindgen_libclang_version" ]; then
Signature · 1 line
2.40.1
author maintainer
#165 lore raw

PATCH 165/600 kbuild: rust_is_available: add check for `bindgen` invocation

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miguel Ojeda <[email protected]>

[ Upstream commit 52cae7f28ed6c3992489f16bb355f5b623f0912e ]

scripts/rust_is_available.sh calls bindgen with a special header in order to check whether the libclang version in use is suitable.

However, the invocation itself may fail if, for instance, bindgen cannot locate libclang. This is fine for Kconfig (since the script will still fail and therefore disable Rust as it should), but it is pretty confusing for users of the rustavailable target given the error will be unrelated:

    ./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 *  + 100 *  + "
    make: *** [Makefile:1816: rustavailable] Error 2

Instead, run the bindgen invocation independently in a previous step, saving its output and return code. If it fails, then show the user a proper error message. Otherwise, continue as usual with the saved output.

Since the previous patch we show a reference to the docs, and the docs now explain how bindgen looks for libclang, thus the error message can leverage the documentation, avoiding duplication here (and making users aware of the setup guide in the documentation).

---
 scripts/rust_is_available.sh | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
scripts/rust_is_available.sh +21 -1
index 0c9be438e4cd3..c965895d80b97 100755
@@ -90,8 +90,28 @@ if [ "$rust_bindings_generator_cversion" -gt "$rust_bindings_generator_min_cvers
 fi
 
 # Check that the `libclang` used by the Rust bindings generator is suitable.
+#
+# In order to do that, first invoke `bindgen` to get the `libclang` version
+# found by `bindgen`. This step may already fail if, for instance, `libclang`
+# is not found, thus inform the user in such a case.
+bindgen_libclang_output=$( \
+	LC_ALL=C "$BINDGEN" $(dirname $0)/rust_is_available_bindgen_libclang.h 2>&1 >/dev/null
+) || bindgen_libclang_code=$?
+if [ -n "$bindgen_libclang_code" ]; then
+	echo >&2 "***"
+	echo >&2 "*** Running '$BINDGEN' to check the libclang version (used by the Rust"
+	echo >&2 "*** bindings generator) failed with code $bindgen_libclang_code. This may be caused by"
+	echo >&2 "*** a failure to locate libclang. See output and docs below for details:"
+	echo >&2 "***"
+	echo >&2 "$bindgen_libclang_output"
+	echo >&2 "***"
+	exit 1
+fi
+
+# `bindgen` returned successfully, thus use the output to check that the version
+# of the `libclang` found by the Rust bindings generator is suitable.
 bindgen_libclang_version=$( \
-	LC_ALL=C "$BINDGEN" $(dirname $0)/rust_is_available_bindgen_libclang.h 2>&1 >/dev/null \
+	echo "$bindgen_libclang_output" \
 		| grep -F 'clang version ' \
 		| grep -oE '[0-9]+\.[0-9]+\.[0-9]+' \
 		| head -n 1 \
Signature · 1 line
2.40.1
author maintainer
#166 lore raw

PATCH 166/600 kbuild: rust_is_available: fix confusion when a version appears in the path

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miguel Ojeda <[email protected]>

[ Upstream commit 9eb7e20e0c5cd069457845f965b3e8a7d736ecb7 ]

bindgen's output for libclang's version check contains paths, which in turn may contain strings that look like version numbers [1][2]:

    .../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0  [-W#pragma-messages], err: false

which the script will pick up as the version instead of the latter.

It is also the case that versions may appear after the actual version (e.g. distribution's version text), which was the reason behind head [3]:

    .../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false

Thus instead ask for a match after the clang version string.

---
 scripts/rust_is_available.sh | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
scripts/rust_is_available.sh +1 -3
index c965895d80b97..7a925d2b20fc7 100755
@@ -112,9 +112,7 @@ fi
 # of the `libclang` found by the Rust bindings generator is suitable.
 bindgen_libclang_version=$( \
 	echo "$bindgen_libclang_output" \
-		| grep -F 'clang version ' \
-		| grep -oE '[0-9]+\.[0-9]+\.[0-9]+' \
-		| head -n 1 \
+		| sed -nE 's:.*clang version ([0-9]+\.[0-9]+\.[0-9]+).*:\1:p'
 )
 bindgen_libclang_min_version=$($min_tool_version llvm)
 bindgen_libclang_cversion=$(get_canonical_version $bindgen_libclang_version)
Signature · 1 line
2.40.1
author maintainer
#167 lore raw

PATCH 167/600 crypto: stm32 - Properly handle pm_runtime_get failing

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Uwe Kleine-König <[email protected]>

[ Upstream commit aec48805163338f8413118796c1dd035661b9140 ]

If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this means the clk wasn't prepared and enabled. Returning early in this case however is wrong as then the following resource frees are skipped and this is never catched up. So do all the cleanups but clk_disable_unprepare().

Also don't emit a warning, as stm32_hash_runtime_resume() already emitted one.

Note that the return value of stm32_hash_remove() is mostly ignored by the device core. The only effect of returning zero instead of an error value is to suppress another warning in platform_remove(). So return 0 even if pm_runtime_resume_and_get() failed.

Fixes 8b4d566de6a5 ("crypto: stm32/hash - Add power management support")
---
 drivers/crypto/stm32/stm32-hash.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/crypto/stm32/stm32-hash.c +3 -4
index d33006d43f761..e3f765434d64e 100644
@@ -1566,9 +1566,7 @@ static int stm32_hash_remove(struct platform_device *pdev)
 	if (!hdev)
 		return -ENODEV;
 
-	ret = pm_runtime_resume_and_get(hdev->dev);
-	if (ret < 0)
-		return ret;
+	ret = pm_runtime_get_sync(hdev->dev);
 
 	stm32_hash_unregister_algs(hdev);
 
@@ -1584,7 +1582,8 @@ static int stm32_hash_remove(struct platform_device *pdev)
 	pm_runtime_disable(hdev->dev);
 	pm_runtime_put_noidle(hdev->dev);
 
-	clk_disable_unprepare(hdev->clk);
+	if (ret >= 0)
+		clk_disable_unprepare(hdev->clk);
 
 	return 0;
 }
Signature · 1 line
2.40.1
author maintainer
#168 lore raw

PATCH 168/600 crypto: api - Use work queue in crypto_destroy_instance

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu <[email protected]>

[ Upstream commit 9ae4577bc077a7e32c3c7d442c95bc76865c0f17 ]

The function crypto_drop_spawn expects to be called in process context. However, when an instance is unregistered while it still has active users, the last user may cause the instance to be freed in atomic context.

Fix this by delaying the freeing to a work queue.

---
 crypto/algapi.c         | 16 ++++++++++++++--
 include/crypto/algapi.h |  3 +++
 2 files changed, 17 insertions(+), 2 deletions(-)
crypto/algapi.c +14 -2
index 8c3a869cc43a9..5dc9ccdd5a510 100644
@@ -17,6 +17,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/workqueue.h>
 
 #include "internal.h"
 
@@ -74,15 +75,26 @@ static void crypto_free_instance(struct crypto_instance *inst)
 	inst->alg.cra_type->free(inst);
 }
 
-static void crypto_destroy_instance(struct crypto_alg *alg)
+static void crypto_destroy_instance_workfn(struct work_struct *w)
 {
-	struct crypto_instance *inst = (void *)alg;
+	struct crypto_instance *inst = container_of(w, struct crypto_instance,
+						    free_work);
 	struct crypto_template *tmpl = inst->tmpl;
 
 	crypto_free_instance(inst);
 	crypto_tmpl_put(tmpl);
 }
 
+static void crypto_destroy_instance(struct crypto_alg *alg)
+{
+	struct crypto_instance *inst = container_of(alg,
+						    struct crypto_instance,
+						    alg);
+
+	INIT_WORK(&inst->free_work, crypto_destroy_instance_workfn);
+	schedule_work(&inst->free_work);
+}
+
 /*
  * This function adds a spawn to the list secondary_spawns which
  * will be used at the end of crypto_remove_spawns to unregister
include/crypto/algapi.h +3 -0
index 224b860647083..939a3196bf002 100644
@@ -12,6 +12,7 @@
 #include <linux/kconfig.h>
 #include <linux/list.h>
 #include <linux/types.h>
+#include <linux/workqueue.h>
 
 #include <asm/unaligned.h>
 
@@ -60,6 +61,8 @@ struct crypto_instance {
 		struct crypto_spawn *spawns;
 	};
 
+	struct work_struct free_work;
+
 	void *__ctx[] CRYPTO_MINALIGN_ATTR;
 };
 
Signature · 1 line
2.40.1
author maintainer
#169 lore raw

PATCH 169/600 Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuanjun Gong <[email protected]>

[ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ]

in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value.

Fixes 7bb318680e86 ("Bluetooth: add nokia driver")
---
 drivers/bluetooth/hci_nokia.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_nokia.c +5 -1
index 05f7f6de6863d..97da0b2bfd17e 100644
@@ -734,7 +734,11 @@ static int nokia_bluetooth_serdev_probe(struct serdev_device *serdev)
 		return err;
 	}
 
-	clk_prepare_enable(sysclk);
+	err = clk_prepare_enable(sysclk);
+	if (err) {
+		dev_err(dev, "could not enable sysclk: %d", err);
+		return err;
+	}
 	btdev->sysclk_speed = clk_get_rate(sysclk);
 	clk_disable_unprepare(sysclk);
 
Signature · 1 line
2.40.1
author maintainer
#170 lore raw

PATCH 170/600 Bluetooth: Fix potential use-after-free when clear keys

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Min Li <[email protected]>

[ Upstream commit 3673952cf0c6cf81b06c66a0b788abeeb02ff3ae ]

Similar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu() call.

Fixes d7d41682efc2 ("Bluetooth: Fix Suspicious RCU usage warnings")
---
 net/bluetooth/hci_core.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
net/bluetooth/hci_core.c +8 -8
index d034bf2a999e1..26884447d72be 100644
@@ -1074,9 +1074,9 @@ void hci_uuids_clear(struct hci_dev *hdev)
 
 void hci_link_keys_clear(struct hci_dev *hdev)
 {
-	struct link_key *key;
+	struct link_key *key, *tmp;
 
-	list_for_each_entry(key, &hdev->link_keys, list) {
+	list_for_each_entry_safe(key, tmp, &hdev->link_keys, list) {
 		list_del_rcu(&key->list);
 		kfree_rcu(key, rcu);
 	}
@@ -1084,9 +1084,9 @@ void hci_link_keys_clear(struct hci_dev *hdev)
 
 void hci_smp_ltks_clear(struct hci_dev *hdev)
 {
-	struct smp_ltk *k;
+	struct smp_ltk *k, *tmp;
 
-	list_for_each_entry(k, &hdev->long_term_keys, list) {
+	list_for_each_entry_safe(k, tmp, &hdev->long_term_keys, list) {
 		list_del_rcu(&k->list);
 		kfree_rcu(k, rcu);
 	}
@@ -1094,9 +1094,9 @@ void hci_smp_ltks_clear(struct hci_dev *hdev)
 
 void hci_smp_irks_clear(struct hci_dev *hdev)
 {
-	struct smp_irk *k;
+	struct smp_irk *k, *tmp;
 
-	list_for_each_entry(k, &hdev->identity_resolving_keys, list) {
+	list_for_each_entry_safe(k, tmp, &hdev->identity_resolving_keys, list) {
 		list_del_rcu(&k->list);
 		kfree_rcu(k, rcu);
 	}
@@ -1104,9 +1104,9 @@ void hci_smp_irks_clear(struct hci_dev *hdev)
 
 void hci_blocked_keys_clear(struct hci_dev *hdev)
 {
-	struct blocked_key *b;
+	struct blocked_key *b, *tmp;
 
-	list_for_each_entry(b, &hdev->blocked_keys, list) {
+	list_for_each_entry_safe(b, tmp, &hdev->blocked_keys, list) {
 		list_del_rcu(&b->list);
 		kfree_rcu(b, rcu);
 	}
Signature · 1 line
2.40.1
author maintainer
#171 lore raw

PATCH 171/600 Bluetooth: hci_sync: Dont double print name in add/remove adv_monitor

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Douglas Anderson <[email protected]>

[ Upstream commit 6f55eea116ba3646fb5fbb31de703f8cf79d8214 ]

The hci_add_adv_monitor() hci_remove_adv_monitor() functions call bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro automatically adds in the device's name. That means that we shouldn't include the name in the bt_dev_dbg() calls.

Stable-dep-of: a2bcd2b63271 ("Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()")

---
 net/bluetooth/hci_core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
net/bluetooth/hci_core.c +5 -5
index 26884447d72be..561e8a77f64cd 100644
@@ -1949,14 +1949,14 @@ int hci_add_adv_monitor(struct hci_dev *hdev, struct adv_monitor *monitor)
 
 	switch (hci_get_adv_monitor_offload_ext(hdev)) {
 	case HCI_ADV_MONITOR_EXT_NONE:
-		bt_dev_dbg(hdev, "%s add monitor %d status %d", hdev->name,
+		bt_dev_dbg(hdev, "add monitor %d status %d",
 			   monitor->handle, status);
 		/* Message was not forwarded to controller - not an error */
 		break;
 
 	case HCI_ADV_MONITOR_EXT_MSFT:
 		status = msft_add_monitor_pattern(hdev, monitor);
-		bt_dev_dbg(hdev, "%s add monitor %d msft status %d", hdev->name,
+		bt_dev_dbg(hdev, "add monitor %d msft status %d",
 			   monitor->handle, status);
 		break;
 	}
@@ -1976,15 +1976,15 @@ static int hci_remove_adv_monitor(struct hci_dev *hdev,
 
 	switch (hci_get_adv_monitor_offload_ext(hdev)) {
 	case HCI_ADV_MONITOR_EXT_NONE: /* also goes here when powered off */
-		bt_dev_dbg(hdev, "%s remove monitor %d status %d", hdev->name,
+		bt_dev_dbg(hdev, "remove monitor %d status %d",
 			   monitor->handle, status);
 		goto free_monitor;
 
 	case HCI_ADV_MONITOR_EXT_MSFT:
 		handle = monitor->handle;
 		status = msft_remove_monitor(hdev, monitor);
-		bt_dev_dbg(hdev, "%s remove monitor %d msft status %d",
-			   hdev->name, handle, status);
+		bt_dev_dbg(hdev, "remove monitor %d msft status %d",
+			   handle, status);
 		break;
 	}
 
Signature · 1 line
2.40.1
author maintainer
#172 lore raw

PATCH 172/600 Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Manish Mandlik <[email protected]>

[ Upstream commit a2bcd2b63271a93a695fabbfbf459c603d956d48 ]

KSAN reports use-after-free in hci_add_adv_monitor().

While adding an adv monitor,

    hci_add_adv_monitor() calls ->
    msft_add_monitor_pattern() calls ->
    msft_add_monitor_sync() calls ->
    msft_le_monitor_advertisement_cb() calls in an error case ->
    hci_free_adv_monitor() which frees the *moniter.

This is referenced by bt_dev_dbg() in hci_add_adv_monitor().

Fix the bt_dev_dbg() by using handle instead of monitor->handle.

Fixes b747a83690c8 ("Bluetooth: hci_sync: Refactor add Adv Monitor")
---
 net/bluetooth/hci_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/hci_core.c +1 -1
index 561e8a77f64cd..146553c0054f6 100644
@@ -1957,7 +1957,7 @@ int hci_add_adv_monitor(struct hci_dev *hdev, struct adv_monitor *monitor)
 	case HCI_ADV_MONITOR_EXT_MSFT:
 		status = msft_add_monitor_pattern(hdev, monitor);
 		bt_dev_dbg(hdev, "add monitor %d msft status %d",
-			   monitor->handle, status);
+			   handle, status);
 		break;
 	}
 
Signature · 1 line
2.40.1
author maintainer
#173 lore raw

PATCH 173/600 net: tcp: fix unexcepted socket die when snd_wnd is 0

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Menglong Dong <[email protected]>

[ Upstream commit e89688e3e97868451a5d05b38a9d2633d6785cd4 ]

In tcp_retransmit_timer(), a window shrunk connection will be regarded as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not right all the time.

The retransmits will become zero-window probes in tcp_retransmit_timer() if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to TCP_RTO_MAX sooner or later.

However, the timer can be delayed and be triggered after 122877ms, not TCP_RTO_MAX, as I tested.

Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true once the RTO come up to TCP_RTO_MAX, and the socket will die.

Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout', which is exact the timestamp of the timeout.

However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp could already be a long time (minutes or hours) in the past even on the first RTO. So we double check the timeout with the duration of the retransmission.

Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket dying too soon.

---
 net/ipv4/tcp_timer.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
net/ipv4/tcp_timer.c +17 -1
index cf354c29ec123..44b49f7d1a9e6 100644
@@ -441,6 +441,22 @@ static void tcp_fastopen_synack_timer(struct sock *sk, struct request_sock *req)
 			  req->timeout << req->num_timeout, TCP_RTO_MAX);
 }
 
+static bool tcp_rtx_probe0_timed_out(const struct sock *sk,
+				     const struct sk_buff *skb)
+{
+	const struct tcp_sock *tp = tcp_sk(sk);
+	const int timeout = TCP_RTO_MAX * 2;
+	u32 rcv_delta, rtx_delta;
+
+	rcv_delta = inet_csk(sk)->icsk_timeout - tp->rcv_tstamp;
+	if (rcv_delta <= timeout)
+		return false;
+
+	rtx_delta = (u32)msecs_to_jiffies(tcp_time_stamp(tp) -
+			(tp->retrans_stamp ?: tcp_skb_timestamp(skb)));
+
+	return rtx_delta > timeout;
+}
 
 /**
  *  tcp_retransmit_timer() - The TCP retransmit timeout handler
@@ -506,7 +522,7 @@ void tcp_retransmit_timer(struct sock *sk)
 					    tp->snd_una, tp->snd_nxt);
 		}
 #endif
-		if (tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX) {
+		if (tcp_rtx_probe0_timed_out(sk, skb)) {
 			tcp_write_err(sk);
 			goto out;
 		}
Signature · 1 line
2.40.1
author maintainer
#174 lore raw

PATCH 174/600 selftests/bpf: Fix repeat option when kfunc_call verification fails

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yipeng Zou <[email protected]>

[ Upstream commit 811915db674f8daf19bb4fcb67da9017235ce26d ]

There is no way where topts.repeat can be set to 1 when tc_test fails. Fix the typo where the break statement slipped by one line.

Fixes fb66223a244f ("selftests/bpf: add test for accessing ctx from syscall program type")
---
 tools/testing/selftests/bpf/prog_tests/kfunc_call.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/bpf/prog_tests/kfunc_call.c +1 -1
index 5af1ee8f0e6ee..36071f3f15ba1 100644
@@ -171,8 +171,8 @@ static void verify_fail(struct kfunc_test_params *param)
 	case tc_test:
 		topts.data_in = &pkt_v4;
 		topts.data_size_in = sizeof(pkt_v4);
-		break;
 		topts.repeat = 1;
+		break;
 	}
 
 	skel = kfunc_call_fail__open_opts(&opts);
Signature · 1 line
2.40.1
author maintainer
#175 lore raw

PATCH 175/600 selftests/bpf: Clean up fmod_ret in bench_rename test script

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yipeng Zou <[email protected]>

[ Upstream commit 83a89c4b6ae93481d3f618aba6a29d89208d26ed ]

Running the bench_rename test script, the following error occurs:

  # ./benchs/run_bench_rename.sh
  base      :    0.819 ± 0.012M/s
  kprobe    :    0.538 ± 0.009M/s
  kretprobe :    0.503 ± 0.004M/s
  rawtp     :    0.779 ± 0.020M/s
  fentry    :    0.726 ± 0.007M/s
  fexit     :    0.691 ± 0.007M/s
  benchmark 'rename-fmodret' not found

The bench_rename_fmodret has been removed in commit b000def2e052 ("selftests: Remove fmod_ret from test_overhead"), thus remove it from the runners in the test script.

Fixes b000def2e052 ("selftests: Remove fmod_ret from test_overhead")
---
 tools/testing/selftests/bpf/benchs/run_bench_rename.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/bpf/benchs/run_bench_rename.sh +1 -1
index 16f774b1cdbed..7b281dbe41656 100755
@@ -2,7 +2,7 @@
 
 set -eufo pipefail
 
-for i in base kprobe kretprobe rawtp fentry fexit fmodret
+for i in base kprobe kretprobe rawtp fentry fexit
 do
 	summary=$(sudo ./bench -w2 -d5 -a rename-$i | tail -n1 | cut -d'(' -f1 | cut -d' ' -f3-)
 	printf "%-10s: %s\n" $i "$summary"
Signature · 1 line
2.40.1
author maintainer
#176 lore raw

PATCH 176/600 spi: tegra114: Remove unnecessary NULL-pointer checks

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Danilenko <[email protected]>

[ Upstream commit 373c36bf7914e3198ac2654dede499f340c52950 ]

cs_setup, cs_hold and cs_inactive points to fields of spi_device struct, so there is no sense in checking them for NULL.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
---
 drivers/spi/spi-tegra114.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/spi/spi-tegra114.c +7 -11
index d9be80e3e1bcb..6b56108308fc5 100644
@@ -723,27 +723,23 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
 	struct spi_delay *setup = &spi->cs_setup;
 	struct spi_delay *hold = &spi->cs_hold;
 	struct spi_delay *inactive = &spi->cs_inactive;
-	u8 setup_dly, hold_dly, inactive_dly;
+	u8 setup_dly, hold_dly;
 	u32 setup_hold;
 	u32 spi_cs_timing;
 	u32 inactive_cycles;
 	u8 cs_state;
 
-	if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
-	    (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
-	    (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
+	if (setup->unit != SPI_DELAY_UNIT_SCK ||
+	    hold->unit != SPI_DELAY_UNIT_SCK ||
+	    inactive->unit != SPI_DELAY_UNIT_SCK) {
 		dev_err(&spi->dev,
 			"Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n",
 			SPI_DELAY_UNIT_SCK);
 		return -EINVAL;
 	}
 
-	setup_dly = setup ? setup->value : 0;
-	hold_dly = hold ? hold->value : 0;
-	inactive_dly = inactive ? inactive->value : 0;
-
-	setup_dly = min_t(u8, setup_dly, MAX_SETUP_HOLD_CYCLES);
-	hold_dly = min_t(u8, hold_dly, MAX_SETUP_HOLD_CYCLES);
+	setup_dly = min_t(u8, setup->value, MAX_SETUP_HOLD_CYCLES);
+	hold_dly = min_t(u8, hold->value, MAX_SETUP_HOLD_CYCLES);
 	if (setup_dly && hold_dly) {
 		setup_hold = SPI_SETUP_HOLD(setup_dly - 1, hold_dly - 1);
 		spi_cs_timing = SPI_CS_SETUP_HOLD(tspi->spi_cs_timing1,
@@ -755,7 +751,7 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
 		}
 	}
 
-	inactive_cycles = min_t(u8, inactive_dly, MAX_INACTIVE_CYCLES);
+	inactive_cycles = min_t(u8, inactive->value, MAX_INACTIVE_CYCLES);
 	if (inactive_cycles)
 		inactive_cycles--;
 	cs_state = inactive_cycles ? 0 : 1;
Signature · 1 line
2.40.1
author maintainer
#177 lore raw

PATCH 177/600 net: Fix slab-out-of-bounds in inet[6]_steal_sock

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenz Bauer <[email protected]>

[ Upstream commit 8897562f67b3e61ad736cd5c9f307447d33280e4 ]

Kumar reported a KASAN splat in tcp_v6_rcv:

bash-5.2# ./test_progs -t btf_skc_cls_ingress
...

  [   51.810085] BUG: KASAN: slab-out-of-bounds in tcp_v6_rcv+0x2d7d/0x3440
  [   51.810458] Read of size 2 at addr ffff8881053f038c by task test_progs/226

The problem is that inet[6]_steal_sock accesses sk->sk_protocol without accounting for request or timewait sockets. To fix this we can't just check sock_common->skc_reuseport since that flag is present on timewait sockets.

Instead, add a fullsock check to avoid the out of bands access of sk_protocol.

Fixes 9c02bec95954 ("bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign")
---
 include/net/inet6_hashtables.h | 2 +-
 include/net/inet_hashtables.h  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
include/net/inet6_hashtables.h +1 -1
index 475e672b4facc..12780b8fb5630 100644
@@ -107,7 +107,7 @@ struct sock *inet6_steal_sock(struct net *net, struct sk_buff *skb, int doff,
 	if (!sk)
 		return NULL;
 
-	if (!prefetched)
+	if (!prefetched || !sk_fullsock(sk))
 		return sk;
 
 	if (sk->sk_protocol == IPPROTO_TCP) {
include/net/inet_hashtables.h +1 -1
index a1b8eb147ce73..9414cb4e6e624 100644
@@ -455,7 +455,7 @@ struct sock *inet_steal_sock(struct net *net, struct sk_buff *skb, int doff,
 	if (!sk)
 		return NULL;
 
-	if (!prefetched)
+	if (!prefetched || !sk_fullsock(sk))
 		return sk;
 
 	if (sk->sk_protocol == IPPROTO_TCP) {
Signature · 1 line
2.40.1
author maintainer
#178 lore raw

PATCH 178/600 net-memcg: Fix scope of sockmem pressure indicators

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Abel Wu <[email protected]>

[ Upstream commit ac8a52962164a50e693fa021d3564d7745b83a7f ]

Now there are two indicators of socket memory pressure sit inside struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating memory reclaim pressure in memcg->memory and ->tcpmem respectively.

When in legacy mode (cgroupv1), the socket memory is charged into ->tcpmem which is independent of ->memory, so socket_pressure has nothing to do with socket's pressure at all. Things could be worse by taking socket_pressure into consideration in legacy mode, as a pressure in ->memory can lead to premature reclamation/throttling in socket.

While for the default mode (cgroupv2), the socket memory is charged into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.

So {socket,tcpmem}_pressure are only used in default/legacy mode respectively for indicating socket memory pressure. This patch fixes the pieces of code that make mixed use of both.

Fixes 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure")
---
 include/linux/memcontrol.h | 9 +++++++--
 mm/vmpressure.c            | 8 ++++++++
 2 files changed, 15 insertions(+), 2 deletions(-)
include/linux/memcontrol.h +7 -2
index e039763029563..099521835cd14 100644
@@ -283,6 +283,11 @@ struct mem_cgroup {
 	atomic_long_t		memory_events[MEMCG_NR_MEMORY_EVENTS];
 	atomic_long_t		memory_events_local[MEMCG_NR_MEMORY_EVENTS];
 
+	/*
+	 * Hint of reclaim pressure for socket memroy management. Note
+	 * that this indicator should NOT be used in legacy cgroup mode
+	 * where socket memory is accounted/charged separately.
+	 */
 	unsigned long		socket_pressure;
 
 	/* Legacy tcp memory accounting */
@@ -1704,8 +1709,8 @@ void mem_cgroup_sk_alloc(struct sock *sk);
 void mem_cgroup_sk_free(struct sock *sk);
 static inline bool mem_cgroup_under_socket_pressure(struct mem_cgroup *memcg)
 {
-	if (!cgroup_subsys_on_dfl(memory_cgrp_subsys) && memcg->tcpmem_pressure)
-		return true;
+	if (!cgroup_subsys_on_dfl(memory_cgrp_subsys))
+		return !!memcg->tcpmem_pressure;
 	do {
 		if (time_before(jiffies, READ_ONCE(memcg->socket_pressure)))
 			return true;
mm/vmpressure.c +8 -0
index b52644771cc43..22c6689d93027 100644
@@ -244,6 +244,14 @@ void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
 	if (mem_cgroup_disabled())
 		return;
 
+	/*
+	 * The in-kernel users only care about the reclaim efficiency
+	 * for this @memcg rather than the whole subtree, and there
+	 * isn't and won't be any in-kernel user in a legacy cgroup.
+	 */
+	if (!cgroup_subsys_on_dfl(memory_cgrp_subsys) && !tree)
+		return;
+
 	vmpr = memcg_to_vmpressure(memcg);
 
 	/*
Signature · 1 line
2.40.1
author maintainer
#179 lore raw

PATCH 179/600 ice: ice_aq_check_events: fix off-by-one check when filling buffer

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Przemek Kitszel <[email protected]>

[ Upstream commit e1e8a142c43336e3d25bfa1cb3a4ae7d00875c48 ]

Allow task's event buffer to be filled also in the case that it's size is exactly the size of the message.

---
 drivers/net/ethernet/intel/ice/ice_main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +7 -6
index 7a00d297be3a9..3f98781e74b28 100644
@@ -1356,6 +1356,7 @@ int ice_aq_wait_for_event(struct ice_pf *pf, u16 opcode, unsigned long timeout,
 static void ice_aq_check_events(struct ice_pf *pf, u16 opcode,
 				struct ice_rq_event_info *event)
 {
+	struct ice_rq_event_info *task_ev;
 	struct ice_aq_task *task;
 	bool found = false;
 
@@ -1364,15 +1365,15 @@ static void ice_aq_check_events(struct ice_pf *pf, u16 opcode,
 		if (task->state || task->opcode != opcode)
 			continue;
 
-		memcpy(&task->event->desc, &event->desc, sizeof(event->desc));
-		task->event->msg_len = event->msg_len;
+		task_ev = task->event;
+		memcpy(&task_ev->desc, &event->desc, sizeof(event->desc));
+		task_ev->msg_len = event->msg_len;
 
 		/* Only copy the data buffer if a destination was set */
-		if (task->event->msg_buf &&
-		    task->event->buf_len > event->buf_len) {
-			memcpy(task->event->msg_buf, event->msg_buf,
+		if (task_ev->msg_buf && task_ev->buf_len >= event->buf_len) {
+			memcpy(task_ev->msg_buf, event->msg_buf,
 			       event->buf_len);
-			task->event->buf_len = event->buf_len;
+			task_ev->buf_len = event->buf_len;
 		}
 
 		task->state = ICE_AQ_TASK_COMPLETE;
Signature · 1 line
2.40.1
author maintainer
#180 lore raw

PATCH 180/600 crypto: caam - fix unchecked return value error

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gaurav Jain <[email protected]>

[ Upstream commit e30685204711a6be40dec2622606950ccd37dafe ]

error:
Unchecked return value (CHECKED_RETURN)
check_return: Calling sg_miter_next without checking return value

fix:
added check if(!sg_miter_next)

Fixes 8a2a0dd35f2e ("crypto: caam - strip input zeros from RSA input buffer")
---
 drivers/crypto/caam/caampkc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/crypto/caam/caampkc.c +3 -1
index 8867275767101..51b48b57266a6 100644
@@ -223,7 +223,9 @@ static int caam_rsa_count_leading_zeros(struct scatterlist *sgl,
 		if (len && *buff)
 			break;
 
-		sg_miter_next(&miter);
+		if (!sg_miter_next(&miter))
+			break;
+
 		buff = miter.addr;
 		len = miter.length;
 
Signature · 1 line
2.40.1
author maintainer
#181 lore raw

PATCH 181/600 hwrng: iproc-rng200 - Implement suspend and resume calls

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <[email protected]>

[ Upstream commit 8e03dd62e5be811efbf0cbeba47e79e793519105 ]

Chips such as BCM7278 support system wide suspend/resume which will cause the HWRNG block to lose its state and reset to its power on reset register values. We need to cleanup and re-initialize the HWRNG for it to be functional coming out of a system suspend cycle.

Fixes c3577f6100ca ("hwrng: iproc-rng200 - Add support for BCM7278")
---
 drivers/char/hw_random/iproc-rng200.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
drivers/char/hw_random/iproc-rng200.c +25 -0
index 06bc060534d81..c0df053cbe4b2 100644
@@ -182,6 +182,8 @@ static int iproc_rng200_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->base);
 	}
 
+	dev_set_drvdata(dev, priv);
+
 	priv->rng.name = "iproc-rng200";
 	priv->rng.read = iproc_rng200_read;
 	priv->rng.init = iproc_rng200_init;
@@ -199,6 +201,28 @@ static int iproc_rng200_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused iproc_rng200_suspend(struct device *dev)
+{
+	struct iproc_rng200_dev *priv = dev_get_drvdata(dev);
+
+	iproc_rng200_cleanup(&priv->rng);
+
+	return 0;
+}
+
+static int __maybe_unused iproc_rng200_resume(struct device *dev)
+{
+	struct iproc_rng200_dev *priv =  dev_get_drvdata(dev);
+
+	iproc_rng200_init(&priv->rng);
+
+	return 0;
+}
+
+static const struct dev_pm_ops iproc_rng200_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(iproc_rng200_suspend, iproc_rng200_resume)
+};
+
 static const struct of_device_id iproc_rng200_of_match[] = {
 	{ .compatible = "brcm,bcm2711-rng200", },
 	{ .compatible = "brcm,bcm7211-rng200", },
@@ -212,6 +236,7 @@ static struct platform_driver iproc_rng200_driver = {
 	.driver = {
 		.name		= "iproc-rng200",
 		.of_match_table = iproc_rng200_of_match,
+		.pm		= &iproc_rng200_pm_ops,
 	},
 	.probe		= iproc_rng200_probe,
 };
Signature · 1 line
2.40.1
author maintainer
#182 lore raw

PATCH 182/600 lwt: Fix return values of BPF xmit ops

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yan Zhai <[email protected]>

[ Upstream commit 29b22badb7a84b783e3a4fffca16f7768fb31205 ]

BPF encap ops can return different types of positive values, such like NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in ip(6)_finish_output2. When this happens, skbs that have been freed would continue to the neighbor subsystem, causing use-after-free bug and kernel crashes.

To fix the incorrect behavior, skb_do_redirect return values can be simply discarded, the same as tc-egress behavior. On the other hand, bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU information. Thus convert its return values to avoid the conflict with LWTUNNEL_XMIT_CONTINUE.

---
 net/core/lwt_bpf.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
net/core/lwt_bpf.c +3 -4
index 8b6b5e72b2179..4a0797f0a154b 100644
@@ -60,9 +60,8 @@ static int run_lwt_bpf(struct sk_buff *skb, struct bpf_lwt_prog *lwt,
 			ret = BPF_OK;
 		} else {
 			skb_reset_mac_header(skb);
-			ret = skb_do_redirect(skb);
-			if (ret == 0)
-				ret = BPF_REDIRECT;
+			skb_do_redirect(skb);
+			ret = BPF_REDIRECT;
 		}
 		break;
 
@@ -255,7 +254,7 @@ static int bpf_lwt_xmit_reroute(struct sk_buff *skb)
 
 	err = dst_output(dev_net(skb_dst(skb)->dev), skb->sk, skb);
 	if (unlikely(err))
-		return err;
+		return net_xmit_errno(err);
 
 	/* ip[6]_finish_output2 understand LWTUNNEL_XMIT_DONE */
 	return LWTUNNEL_XMIT_DONE;
Signature · 1 line
2.40.1
author maintainer
#183 lore raw

PATCH 183/600 lwt: Check LWTUNNEL_XMIT_CONTINUE strictly

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yan Zhai <[email protected]>

[ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ]

LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2, such that any positive return value from a xmit hook could cause unexpected continue behavior, despite that related skb may have been freed. This could be error-prone for future xmit hook ops. One of the possible errors is to return statuses of dst_output directly.

To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to distinguish from dst_output statuses and check the continue condition explicitly.

---
 include/net/lwtunnel.h | 5 ++++-
 net/ipv4/ip_output.c   | 2 +-
 net/ipv6/ip6_output.c  | 2 +-
 3 files changed, 6 insertions(+), 3 deletions(-)
include/net/lwtunnel.h +4 -1
index 6f15e6fa154e6..53bd2d02a4f0d 100644
@@ -16,9 +16,12 @@
 #define LWTUNNEL_STATE_INPUT_REDIRECT	BIT(1)
 #define LWTUNNEL_STATE_XMIT_REDIRECT	BIT(2)
 
+/* LWTUNNEL_XMIT_CONTINUE should be distinguishable from dst_output return
+ * values (NET_XMIT_xxx and NETDEV_TX_xxx in linux/netdevice.h) for safety.
+ */
 enum {
 	LWTUNNEL_XMIT_DONE,
-	LWTUNNEL_XMIT_CONTINUE,
+	LWTUNNEL_XMIT_CONTINUE = 0x100,
 };
 
 
net/ipv4/ip_output.c +1 -1
index acfe58d2f1dd7..ebd2cea5b7d7a 100644
@@ -214,7 +214,7 @@ static int ip_finish_output2(struct net *net, struct sock *sk, struct sk_buff *s
 	if (lwtunnel_xmit_redirect(dst->lwtstate)) {
 		int res = lwtunnel_xmit(skb);
 
-		if (res < 0 || res == LWTUNNEL_XMIT_DONE)
+		if (res != LWTUNNEL_XMIT_CONTINUE)
 			return res;
 	}
 
net/ipv6/ip6_output.c +1 -1
index 95a55c6630add..34192f7a166fb 100644
@@ -112,7 +112,7 @@ static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *
 	if (lwtunnel_xmit_redirect(dst->lwtstate)) {
 		int res = lwtunnel_xmit(skb);
 
-		if (res < 0 || res == LWTUNNEL_XMIT_DONE)
+		if (res != LWTUNNEL_XMIT_CONTINUE)
 			return res;
 	}
 
Signature · 1 line
2.40.1
author maintainer
#184 lore raw

PATCH 184/600 fs: ocfs2: namei: check return value of ocfs2_add_entry()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Artem Chernyshev <[email protected]>

[ Upstream commit 6b72e5f9e79360fce4f2be7fe81159fbdf4256a5 ]

Process result of ocfs2_add_entry() in case we have an error value.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Cc Artem Chernyshev <[email protected]>
Cc Joel Becker <[email protected]>
Cc Kurt Hackel <[email protected]>
Cc Mark Fasheh <[email protected]>
Cc Junxiao Bi <[email protected]>
Cc Changwei Ge <[email protected]>
Cc Gang He <[email protected]>
Cc Jun Piao <[email protected]>
---
 fs/ocfs2/namei.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/ocfs2/namei.c +4 -0
index 1c7ac433667df..04a8505bd97af 100644
@@ -1535,6 +1535,10 @@ static int ocfs2_rename(struct user_namespace *mnt_userns,
 		status = ocfs2_add_entry(handle, new_dentry, old_inode,
 					 OCFS2_I(old_inode)->ip_blkno,
 					 new_dir_bh, &target_insert);
+		if (status < 0) {
+			mlog_errno(status);
+			goto bail;
+		}
 	}
 
 	old_inode->i_ctime = current_time(old_inode);
Signature · 1 line
2.40.1
author maintainer
#185 lore raw

PATCH 185/600 net: annotate data-races around sk->sk_lingertime

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit bc1fb82ae11753c5dec53c667a055dc37796dbd2 ]

sk_getsockopt() runs locklessly. This means sk->sk_lingertime can be read while other threads are changing its value.

Other reads also happen without socket lock being held, and must be annotated.

Remove preprocessor logic using BITS_PER_LONG, compilers are smart enough to figure this by themselves.

v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning

    (Jakub)
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/bluetooth/iso.c |  2 +-
 net/bluetooth/sco.c |  2 +-
 net/core/sock.c     | 18 +++++++++---------
 net/sched/em_meta.c |  2 +-
 net/smc/af_smc.c    |  2 +-
 5 files changed, 13 insertions(+), 13 deletions(-)
net/bluetooth/iso.c +1 -1
index 699e4f400df29..5cd2e775915be 100644
@@ -1394,7 +1394,7 @@ static int iso_sock_release(struct socket *sock)
 
 	iso_sock_close(sk);
 
-	if (sock_flag(sk, SOCK_LINGER) && sk->sk_lingertime &&
+	if (sock_flag(sk, SOCK_LINGER) && READ_ONCE(sk->sk_lingertime) &&
 	    !(current->flags & PF_EXITING)) {
 		lock_sock(sk);
 		err = bt_sock_wait_state(sk, BT_CLOSED, sk->sk_lingertime);
net/bluetooth/sco.c +1 -1
index 1755f91a66f6a..6d4168cfeb563 100644
@@ -1255,7 +1255,7 @@ static int sco_sock_release(struct socket *sock)
 
 	sco_sock_close(sk);
 
-	if (sock_flag(sk, SOCK_LINGER) && sk->sk_lingertime &&
+	if (sock_flag(sk, SOCK_LINGER) && READ_ONCE(sk->sk_lingertime) &&
 	    !(current->flags & PF_EXITING)) {
 		lock_sock(sk);
 		err = bt_sock_wait_state(sk, BT_CLOSED, sk->sk_lingertime);
net/core/sock.c +9 -9
index 8b91d9f911336..fc475845c94d5 100644
@@ -793,7 +793,7 @@ EXPORT_SYMBOL(sock_set_reuseport);
 void sock_no_linger(struct sock *sk)
 {
 	lock_sock(sk);
-	sk->sk_lingertime = 0;
+	WRITE_ONCE(sk->sk_lingertime, 0);
 	sock_set_flag(sk, SOCK_LINGER);
 	release_sock(sk);
 }
@@ -1219,15 +1219,15 @@ int sk_setsockopt(struct sock *sk, int level, int optname,
 			ret = -EFAULT;
 			break;
 		}
-		if (!ling.l_onoff)
+		if (!ling.l_onoff) {
 			sock_reset_flag(sk, SOCK_LINGER);
-		else {
-#if (BITS_PER_LONG == 32)
-			if ((unsigned int)ling.l_linger >= MAX_SCHEDULE_TIMEOUT/HZ)
-				sk->sk_lingertime = MAX_SCHEDULE_TIMEOUT;
+		} else {
+			unsigned long t_sec = ling.l_linger;
+
+			if (t_sec >= MAX_SCHEDULE_TIMEOUT / HZ)
+				WRITE_ONCE(sk->sk_lingertime, MAX_SCHEDULE_TIMEOUT);
 			else
-#endif
-				sk->sk_lingertime = (unsigned int)ling.l_linger * HZ;
+				WRITE_ONCE(sk->sk_lingertime, t_sec * HZ);
 			sock_set_flag(sk, SOCK_LINGER);
 		}
 		break;
@@ -1678,7 +1678,7 @@ int sk_getsockopt(struct sock *sk, int level, int optname,
 	case SO_LINGER:
 		lv		= sizeof(v.ling);
 		v.ling.l_onoff	= sock_flag(sk, SOCK_LINGER);
-		v.ling.l_linger	= sk->sk_lingertime / HZ;
+		v.ling.l_linger	= READ_ONCE(sk->sk_lingertime) / HZ;
 		break;
 
 	case SO_BSDCOMPAT:
net/sched/em_meta.c +1 -1
index b1f1b49d35edf..6f2f135aab676 100644
@@ -502,7 +502,7 @@ META_COLLECTOR(int_sk_lingertime)
 		*err = -1;
 		return;
 	}
-	dst->value = sk->sk_lingertime / HZ;
+	dst->value = READ_ONCE(sk->sk_lingertime) / HZ;
 }
 
 META_COLLECTOR(int_sk_err_qlen)
net/smc/af_smc.c +1 -1
index 84219c5121bc2..f774d840759d6 100644
@@ -1807,7 +1807,7 @@ void smc_close_non_accepted(struct sock *sk)
 	lock_sock(sk);
 	if (!sk->sk_lingertime)
 		/* wait for peer closing */
-		sk->sk_lingertime = SMC_MAX_STREAM_WAIT_TIMEOUT;
+		WRITE_ONCE(sk->sk_lingertime, SMC_MAX_STREAM_WAIT_TIMEOUT);
 	__smc_release(smc);
 	release_sock(sk);
 	sock_put(sk); /* sock_hold above */
Signature · 1 line
2.40.1
author maintainer
#186 lore raw

PATCH 186/600 wifi: mwifiex: fix memory leak in mwifiex_histogram_read()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <[email protected]>

[ Upstream commit 9c8fd72a5c2a031cbc680a2990107ecd958ffcdb ]

Always free the zeroed page on return from 'mwifiex_histogram_read()'.

Fixes cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
---
 drivers/net/wireless/marvell/mwifiex/debugfs.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/net/wireless/marvell/mwifiex/debugfs.c +7 -2
index bda53cb91f376..63f232c723374 100644
@@ -253,8 +253,11 @@ mwifiex_histogram_read(struct file *file, char __user *ubuf,
 	if (!p)
 		return -ENOMEM;
 
-	if (!priv || !priv->hist_data)
-		return -EFAULT;
+	if (!priv || !priv->hist_data) {
+		ret = -EFAULT;
+		goto free_and_exit;
+	}
+
 	phist_data = priv->hist_data;
 
 	p += sprintf(p, "\n"
@@ -309,6 +312,8 @@ mwifiex_histogram_read(struct file *file, char __user *ubuf,
 	ret = simple_read_from_buffer(ubuf, count, ppos, (char *)page,
 				      (unsigned long)p - page);
 
+free_and_exit:
+	free_page(page);
 	return ret;
 }
 
Signature · 1 line
2.40.1
author maintainer
#187 lore raw

PATCH 187/600 wifi: mwifiex: Fix missed return in oob checks failed path

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Polaris Pi <[email protected]>

[ Upstream commit 2785851c627f2db05f9271f7f63661b5dbd95c4c ]

Add missed return in mwifiex_uap_queue_bridged_pkt() and mwifiex_process_rx_packet().

Fixes 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
---
 drivers/net/wireless/marvell/mwifiex/sta_rx.c   | 1 +
 drivers/net/wireless/marvell/mwifiex/uap_txrx.c | 1 +
 2 files changed, 2 insertions(+)
drivers/net/wireless/marvell/mwifiex/sta_rx.c +1 -0
index f2899d53a43f9..65420ad674167 100644
@@ -92,6 +92,7 @@ int mwifiex_process_rx_packet(struct mwifiex_private *priv,
 			    skb->len, rx_pkt_off);
 		priv->stats.rx_dropped++;
 		dev_kfree_skb_any(skb);
+		return -1;
 	}
 
 	if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
drivers/net/wireless/marvell/mwifiex/uap_txrx.c +1 -0
index 04ff051f5d186..c1b8d41dd7536 100644
@@ -110,6 +110,7 @@ static void mwifiex_uap_queue_bridged_pkt(struct mwifiex_private *priv,
 			    skb->len, le16_to_cpu(uap_rx_pd->rx_pkt_offset));
 		priv->stats.rx_dropped++;
 		dev_kfree_skb_any(skb);
+		return;
 	}
 
 	if ((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
Signature · 1 line
2.40.1
author maintainer
#188 lore raw

PATCH 188/600 ARM: dts: Add .dts files missing from the build

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rob Herring <[email protected]>

[ Upstream commit 86684c2481b6e6a46c2282acee13554e34e66071 ]

Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build.

Stable-dep-of: 92632115fb57 ("samples/bpf: fix bio latency check with tracepoint")

---
 arch/arm/boot/dts/Makefile | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/Makefile +8 -0
index 6aa7dc4db2fc8..df6d905eeb877 100644
@@ -331,6 +331,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-iconnect.dtb \
 	kirkwood-iomega_ix2_200.dtb \
 	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-l-50.dtb \
 	kirkwood-laplug.dtb \
@@ -861,7 +862,10 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-craneboard.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
+	logicpd-torpedo-35xx-devkit.dtb \
 	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-torpedo-37xx-devkit-28.dtb \
+	logicpd-som-lv-35xx-devkit.dtb \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
@@ -1527,6 +1531,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-388-helios4.dtb \
 	armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
 	armada-398-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
@@ -1556,6 +1562,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt2701-evb.dtb \
 	mt6580-evbp1.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
 	mt6589-aquaris5.dtb \
 	mt6589-fairphone-fp1.dtb \
 	mt6592-evb.dtb \
@@ -1608,6 +1615,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
 	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
Signature · 1 line
2.40.1
author maintainer
#189 lore raw

PATCH 189/600 samples/bpf: fix bio latency check with tracepoint

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel T. Lee <[email protected]>

[ Upstream commit 92632115fb57ff9e368f256913e96d6fd5abf5ab ]

Recently, a new tracepoint for the block layer, specifically the block_io_start/done tracepoints, was introduced in commit 5a80bd075f3b ("block: introduce block_io_start/block_io_done tracepoints").

Previously, the kprobe entry used for this purpose was quite unstable and inherently broke relevant probes [1]. Now that a stable tracepoint is available, this commit replaces the bio latency check with it.

One of the changes made during this replacement is the key used for the hash table. Since 'struct request' cannot be used as a hash key, the approach taken follows that which was implemented in bcc/biolatency [2]. (uses dev:sector for the key)

[1]: https://github.com/iovisor/bcc/issues/4261
[2]: https://github.com/iovisor/bcc/pull/4691

Fixes 450b7879e345 ("block: move blk_account_io_{start,done} to blk-mq.c")
---
 samples/bpf/tracex3_kern.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)
samples/bpf/tracex3_kern.c +24 -12
index bde6591cb20c5..af235bd6615b1 100644
@@ -11,6 +11,12 @@
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_tracing.h>
 
+struct start_key {
+	dev_t dev;
+	u32 _pad;
+	sector_t sector;
+};
+
 struct {
 	__uint(type, BPF_MAP_TYPE_HASH);
 	__type(key, long);
@@ -18,16 +24,17 @@ struct {
 	__uint(max_entries, 4096);
 } my_map SEC(".maps");
 
-/* kprobe is NOT a stable ABI. If kernel internals change this bpf+kprobe
- * example will no longer be meaningful
- */
-SEC("kprobe/blk_mq_start_request")
-int bpf_prog1(struct pt_regs *ctx)
+/* from /sys/kernel/tracing/events/block/block_io_start/format */
+SEC("tracepoint/block/block_io_start")
+int bpf_prog1(struct trace_event_raw_block_rq *ctx)
 {
-	long rq = PT_REGS_PARM1(ctx);
 	u64 val = bpf_ktime_get_ns();
+	struct start_key key = {
+		.dev = ctx->dev,
+		.sector = ctx->sector
+	};
 
-	bpf_map_update_elem(&my_map, &rq, &val, BPF_ANY);
+	bpf_map_update_elem(&my_map, &key, &val, BPF_ANY);
 	return 0;
 }
 
@@ -49,21 +56,26 @@ struct {
 	__uint(max_entries, SLOTS);
 } lat_map SEC(".maps");
 
-SEC("kprobe/__blk_account_io_done")
-int bpf_prog2(struct pt_regs *ctx)
+/* from /sys/kernel/tracing/events/block/block_io_done/format */
+SEC("tracepoint/block/block_io_done")
+int bpf_prog2(struct trace_event_raw_block_rq *ctx)
 {
-	long rq = PT_REGS_PARM1(ctx);
+	struct start_key key = {
+		.dev = ctx->dev,
+		.sector = ctx->sector
+	};
+
 	u64 *value, l, base;
 	u32 index;
 
-	value = bpf_map_lookup_elem(&my_map, &rq);
+	value = bpf_map_lookup_elem(&my_map, &key);
 	if (!value)
 		return 0;
 
 	u64 cur_time = bpf_ktime_get_ns();
 	u64 delta = cur_time - *value;
 
-	bpf_map_delete_elem(&my_map, &rq);
+	bpf_map_delete_elem(&my_map, &key);
 
 	/* the lines below are computing index = log10(delta)*10
 	 * using integer arithmetic
Signature · 1 line
2.40.1
author maintainer
#190 lore raw

PATCH 190/600 samples/bpf: fix broken map lookup probe

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel T. Lee <[email protected]>

[ Upstream commit d93a7cf6ca2cfcd7de5d06f753ce8d5e863316ac ]

In the commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock"), a potential deadlock issue was addressed, which resulted in *_map_lookup_elem not triggering BPF programs. (prior to lookup, bpf_disable_instrumentation() is used)

To resolve the broken map lookup probe using "htab_map_lookup_elem", this commit introduces an alternative approach. Instead, it utilize "bpf_map_copy_value" and apply a filter specifically for the hash table with map_type.

Fixes 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock")
---
 samples/bpf/tracex6_kern.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
samples/bpf/tracex6_kern.c +15 -2
index acad5712d8b4f..fd602c2774b8b 100644
@@ -2,6 +2,8 @@
 #include <linux/version.h>
 #include <uapi/linux/bpf.h>
 #include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_core_read.h>
 
 struct {
 	__uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
@@ -45,13 +47,24 @@ int bpf_prog1(struct pt_regs *ctx)
 	return 0;
 }
 
-SEC("kprobe/htab_map_lookup_elem")
-int bpf_prog2(struct pt_regs *ctx)
+/*
+ * Since *_map_lookup_elem can't be expected to trigger bpf programs
+ * due to potential deadlocks (bpf_disable_instrumentation), this bpf
+ * program will be attached to bpf_map_copy_value (which is called
+ * from map_lookup_elem) and will only filter the hashtable type.
+ */
+SEC("kprobe/bpf_map_copy_value")
+int BPF_KPROBE(bpf_prog2, struct bpf_map *map)
 {
 	u32 key = bpf_get_smp_processor_id();
 	struct bpf_perf_event_value *val, buf;
+	enum bpf_map_type type;
 	int error;
 
+	type = BPF_CORE_READ(map, map_type);
+	if (type != BPF_MAP_TYPE_HASH)
+		return 0;
+
 	error = bpf_perf_event_read_value(&counters, key, &buf, sizeof(buf));
 	if (error)
 		return 0;
Signature · 1 line
2.40.1
author maintainer
#191 lore raw

PATCH 191/600 wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fedor Pchelkin <[email protected]>

[ Upstream commit b674fb513e2e7a514fcde287c0f73915d393fdb6 ]

Currently, the synchronization between ath9k_wmi_cmd() and ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().

Consider the following scenario:

CPU0 CPU1

ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
ath9k_wmi_cmd_issue(...)
wait_for_completion_timeout(...)
---
timeout
---

					/* the callback is being processed
					 * before last_seq_id became zero
					 */
					ath9k_wmi_ctrl_rx(...)
					  spin_lock_irqsave(...)
					  /* wmi->last_seq_id check here
					   * doesn't detect timeout yet
					   */
					  spin_unlock_irqrestore(...)

/* last_seq_id is zeroed to
* indicate there was a timeout
*/
wmi->last_seq_id = 0
mutex_unlock(&wmi->op_mutex)
return -ETIMEDOUT

ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
/* the buffer is replaced with
* another one
*/
wmi->cmd_rsp_buf = rsp_buf
wmi->cmd_rsp_len = rsp_len
ath9k_wmi_cmd_issue(...)

    spin_lock_irqsave(...)
    spin_unlock_irqrestore(...)
  wait_for_completion_timeout(...)
					/* the continuation of the
					 * callback left after the first
					 * ath9k_wmi_cmd call
					 */
					  ath9k_wmi_rsp_callback(...)
					    /* copying data designated
					     * to already timeouted
					     * WMI command into an
					     * inappropriate wmi_cmd_buf
					     */
					    memcpy(...)
					    complete(&wmi->cmd_wait)

/* awakened by the bogus callback
* => invalid return result
*/
mutex_unlock(&wmi->op_mutex)
return 0

To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd() under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for initially designated wmi_cmd call, otherwise the path would be rejected with last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

---
 drivers/net/wireless/ath/ath9k/wmi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath9k/wmi.c +4 -2
index d652c647d56b5..04f363cb90fe5 100644
@@ -242,10 +242,10 @@ static void ath9k_wmi_ctrl_rx(void *priv, struct sk_buff *skb,
 		spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 		goto free_skb;
 	}
-	spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
 	/* WMI command response */
 	ath9k_wmi_rsp_callback(wmi, skb);
+	spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
 free_skb:
 	kfree_skb(skb);
@@ -308,8 +308,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	struct ath_common *common = ath9k_hw_common(ah);
 	u16 headroom = sizeof(struct htc_frame_hdr) +
 		       sizeof(struct wmi_cmd_hdr);
+	unsigned long time_left, flags;
 	struct sk_buff *skb;
-	unsigned long time_left;
 	int ret = 0;
 
 	if (ah->ah_flags & AH_UNPLUGGED)
@@ -345,7 +345,9 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	if (!time_left) {
 		ath_dbg(common, WMI, "Timeout waiting for WMI command: %s\n",
 			wmi_cmd_to_name(cmd_id));
+		spin_lock_irqsave(&wmi->wmi_lock, flags);
 		wmi->last_seq_id = 0;
+		spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 		mutex_unlock(&wmi->op_mutex);
 		return -ETIMEDOUT;
 	}
Signature · 1 line
2.40.1
author maintainer
#192 lore raw

PATCH 192/600 wifi: ath9k: protect WMI command response buffer replacement with a lock

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fedor Pchelkin <[email protected]>

[ Upstream commit 454994cfa9e4c18b6df9f78b60db8eadc20a6c25 ]

If ath9k_wmi_cmd() has exited with a timeout, it is possible that during next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command writes to new wmi->cmd_rsp_buf and makes a completion. This results in an invalid ath9k_wmi_cmd() return value.

Move the replacement of WMI command response buffer and length under wmi_lock. Note that last_seq_id value is updated there, too.

Thus, the buffer cannot be written to by a belated wmi_rsp callback because that path is properly rejected by the last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

---
 drivers/net/wireless/ath/ath9k/wmi.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath9k/wmi.c +8 -6
index 04f363cb90fe5..1476b42b52a91 100644
@@ -283,7 +283,8 @@ int ath9k_wmi_connect(struct htc_target *htc, struct wmi *wmi,
 
 static int ath9k_wmi_cmd_issue(struct wmi *wmi,
 			       struct sk_buff *skb,
-			       enum wmi_cmd_id cmd, u16 len)
+			       enum wmi_cmd_id cmd, u16 len,
+			       u8 *rsp_buf, u32 rsp_len)
 {
 	struct wmi_cmd_hdr *hdr;
 	unsigned long flags;
@@ -293,6 +294,11 @@ static int ath9k_wmi_cmd_issue(struct wmi *wmi,
 	hdr->seq_no = cpu_to_be16(++wmi->tx_seq_id);
 
 	spin_lock_irqsave(&wmi->wmi_lock, flags);
+
+	/* record the rsp buffer and length */
+	wmi->cmd_rsp_buf = rsp_buf;
+	wmi->cmd_rsp_len = rsp_len;
+
 	wmi->last_seq_id = wmi->tx_seq_id;
 	spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
@@ -333,11 +339,7 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 		goto out;
 	}
 
-	/* record the rsp buffer and length */
-	wmi->cmd_rsp_buf = rsp_buf;
-	wmi->cmd_rsp_len = rsp_len;
-
-	ret = ath9k_wmi_cmd_issue(wmi, skb, cmd_id, cmd_len);
+	ret = ath9k_wmi_cmd_issue(wmi, skb, cmd_id, cmd_len, rsp_buf, rsp_len);
 	if (ret)
 		goto out;
 
Signature · 1 line
2.40.1
author maintainer
#193 lore raw

PATCH 193/600 wifi: nl80211/cfg80211: add forgotten nla_policy for BSS color attribute

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lin Ma <[email protected]>

[ Upstream commit 218d690c49b7e9c94ad0d317adbdd4af846ea0dc ]

The previous commit dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters") adds a parameter for NDP ranging by introducing a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR.

However, the author forgot to also describe the nla_policy at nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just complement it to avoid malformed attribute that causes out-of-attribute access.

Fixes dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters")
---
 net/wireless/nl80211.c | 1 +
 1 file changed, 1 insertion(+)
net/wireless/nl80211.c +1 -0
index c2363d44a1ffc..12c7c89d5be1d 100644
@@ -323,6 +323,7 @@ nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = {
 	[NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED] = { .type = NLA_FLAG },
 	[NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED] = { .type = NLA_FLAG },
 	[NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK] = { .type = NLA_FLAG },
+	[NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR] = { .type = NLA_U8 },
 };
 
 static const struct nla_policy
Signature · 1 line
2.40.1
author maintainer
#194 lore raw

PATCH 194/600 mac80211: make ieee80211_tx_info padding explicit

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit a7a2ef0c4b3efbd7d6f3fabd87dbbc0b3f2de5af ]

While looking at a bug, I got rather confused by the layout of the 'status' field in ieee80211_tx_info. Apparently, the intention is that status_driver_data[] is used for driver specific data, and fills up the size of the union to 40 bytes, just like the other ones.

This is indeed what actually happens, but only because of the combination of two mistakes:

- "void *status_driver_data[18 / sizeof(void *)];" is intended to be 18 bytes long but is actually two bytes shorter because of rounding-down in the division, to a multiple of the pointer size (4 bytes or 8 bytes).

- The other fields combined are intended to be 22 bytes long, but are actually 24 bytes because of padding in front of the unaligned tx_time member, and in front of the pointer array.

The two mistakes cancel out. so the size ends up fine, but it seems more helpful to make this explicit, by having a multiple of 8 bytes in the size calculation and explicitly describing the padding.

Fixes ea5907db2a9cc ("mac80211: fix struct ieee80211_tx_info size")
Fixes 02219b3abca59 ("mac80211: add WMM admission control support")
---
 include/net/mac80211.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
include/net/mac80211.h +3 -1
index 8a338c33118f9..43173204d6d5e 100644
@@ -1141,9 +1141,11 @@ struct ieee80211_tx_info {
 			u8 ampdu_ack_len;
 			u8 ampdu_len;
 			u8 antenna;
+			u8 pad;
 			u16 tx_time;
 			u8 flags;
-			void *status_driver_data[18 / sizeof(void *)];
+			u8 pad2;
+			void *status_driver_data[16 / sizeof(void *)];
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[
Signature · 1 line
2.40.1
author maintainer
#195 lore raw

PATCH 195/600 wifi: mwifiex: avoid possible NULL skb pointer dereference

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Antipov <[email protected]>

[ Upstream commit 35a7a1ce7c7d61664ee54f5239a1f120ab95a87e ]

In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

---
 drivers/net/wireless/marvell/mwifiex/uap_txrx.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/wireless/marvell/mwifiex/uap_txrx.c +9 -1
index c1b8d41dd7536..b8b9a0fcb19cd 100644
@@ -253,7 +253,15 @@ int mwifiex_handle_uap_rx_forward(struct mwifiex_private *priv,
 
 	if (is_multicast_ether_addr(ra)) {
 		skb_uap = skb_copy(skb, GFP_ATOMIC);
-		mwifiex_uap_queue_bridged_pkt(priv, skb_uap);
+		if (likely(skb_uap)) {
+			mwifiex_uap_queue_bridged_pkt(priv, skb_uap);
+		} else {
+			mwifiex_dbg(adapter, ERROR,
+				    "failed to copy skb for uAP\n");
+			priv->stats.rx_dropped++;
+			dev_kfree_skb_any(skb);
+			return -1;
+		}
 	} else {
 		if (mwifiex_get_sta_entry(priv, ra)) {
 			/* Requeue Intra-BSS packet */
Signature · 1 line
2.40.1
author maintainer
#196 lore raw

PATCH 196/600 Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <[email protected]>

[ Upstream commit 2a05334d7f91ff189692089c05fc48cc1d8204de ]

It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile tested only.

Fixes baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
---
 drivers/bluetooth/btusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/bluetooth/btusb.c +1 -1
index d6f405763c56f..f2062c2a28da8 100644
@@ -1984,7 +1984,7 @@ static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)
 		 * alternate setting.
 		 */
 		spin_lock_irqsave(&data->rxlock, flags);
-		kfree_skb(data->sco_skb);
+		dev_kfree_skb_irq(data->sco_skb);
 		data->sco_skb = NULL;
 		spin_unlock_irqrestore(&data->rxlock, flags);
 
Signature · 1 line
2.40.1
author maintainer
#197 lore raw

PATCH 197/600 arm64: mm: use ptep_clear() instead of pte_clear() in clear_flush()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Qi Zheng <[email protected]>

[ Upstream commit 00de2c9f26b15f1a6f2af516dd8ec5f8d28189b7 ]

In clear_flush(), the original pte may be a present entry, so we should use ptep_clear() to let page_table_check track the pte clearing operation, otherwise it may cause false positive in subsequent set_pte_at().

Fixes 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Cc Catalin Marinas <[email protected]>
Cc Kefeng Wang <[email protected]>
Cc Muchun Song <[email protected]>
Cc Pasha Tatashin <[email protected]>
Cc Qi Zheng <[email protected]>
---
 arch/arm64/mm/hugetlbpage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/mm/hugetlbpage.c +1 -1
index 35e9a468d13e6..134dcf6bc650c 100644
@@ -236,7 +236,7 @@ static void clear_flush(struct mm_struct *mm,
 	unsigned long i, saddr = addr;
 
 	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
-		pte_clear(mm, addr, ptep);
+		ptep_clear(mm, addr, ptep);
 
 	flush_tlb_range(&vma, saddr, addr);
 }
Signature · 1 line
2.40.1
author maintainer
#198 lore raw

PATCH 198/600 wifi: ath9k: use IS_ERR() with debugfs_create_dir()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Ming <[email protected]>

[ Upstream commit 1e4134610d93271535ecf900a676e1f094e9944c ]

The debugfs_create_dir() function returns error pointers, it never returns NULL. Most incorrect error checks were fixed, but the one in ath9k_htc_init_debug() was forgotten.

Fix the remaining error check.

---
 drivers/net/wireless/ath/ath9k/htc_drv_debug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/ath/ath9k/htc_drv_debug.c +1 -1
index b3ed65e5c4da8..c55aab01fff5d 100644
@@ -491,7 +491,7 @@ int ath9k_htc_init_debug(struct ath_hw *ah)
 
 	priv->debug.debugfs_phy = debugfs_create_dir(KBUILD_MODNAME,
 					     priv->hw->wiphy->debugfsdir);
-	if (!priv->debug.debugfs_phy)
+	if (IS_ERR(priv->debug.debugfs_phy))
 		return -ENOMEM;
 
 	ath9k_cmn_spectral_init_debug(&priv->spec_priv, priv->debug.debugfs_phy);
Signature · 1 line
2.40.1
author maintainer
#199 lore raw

PATCH 199/600 ice: avoid executing commands on other ports when driving sync

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jacob Keller <[email protected]>

[ Upstream commit 0aacec49c29e7c5b1487e859b0c0a42388c34092 ]

The ice hardware has a synchronization mechanism used to drive the simultaneous application of commands on both PHY ports and the source timer in the MAC.

When issuing a sync via ice_ptp_exec_tmr_cmd(), the hardware will simultaneously apply the commands programmed for the main timer and each PHY port. Neither the main timer command register, nor the PHY port command registers auto clear on command execution.

During the execution of a timer command intended for a single port on E822 devices, such as those used to configure a PHY during link up, the driver is not correctly clearing the previous commands.

This results in unintentionally executing the last programmed command on the main timer and other PHY ports whenever performing reconfiguration on E822 ports after link up. This results in unintended side effects on other timers, depending on what command was previously programmed.

To fix this, the driver must ensure that the main timer and all other PHY ports are properly initialized to perform no action.

The enumeration for timer commands does not include an enumeration value for doing nothing. Introduce ICE_PTP_NOP for this purpose. When writing a timer command to hardware, leave the command bits set to zero which indicates that no operation should be performed on that port.

Modify ice_ptp_one_port_cmd() to always initialize all ports. For all ports other than the one being configured, write their timer command register to ICE_PTP_NOP. This ensures that no side effect happens on the timer command.

To fix this for the PHY ports, modify ice_ptp_one_port_cmd() to always initialize all other ports to ICE_PTP_NOP. This ensures that no side effects happen on the other ports.

Call ice_ptp_src_cmd() with a command value if ICE_PTP_NOP in ice_sync_phy_timer_e822() and ice_start_phy_timer_e822().

With both of these changes, the driver should no longer execute a stale command on the main timer or another PHY port when reconfiguring one of the PHY ports after link up.

---
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 55 +++++++++++++++++++--
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h |  3 +-
 2 files changed, 52 insertions(+), 6 deletions(-)
drivers/net/ethernet/intel/ice/ice_ptp_hw.c +50 -5
index 772b1f566d6ed..813acd6a4b469 100644
@@ -131,6 +131,8 @@ static void ice_ptp_src_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
 	case READ_TIME:
 		cmd_val |= GLTSYN_CMD_READ_TIME;
 		break;
+	case ICE_PTP_NOP:
+		break;
 	}
 
 	wr32(hw, GLTSYN_CMD, cmd_val);
@@ -1200,18 +1202,18 @@ ice_ptp_read_port_capture(struct ice_hw *hw, u8 port, u64 *tx_ts, u64 *rx_ts)
 }
 
 /**
- * ice_ptp_one_port_cmd - Prepare a single PHY port for a timer command
+ * ice_ptp_write_port_cmd_e822 - Prepare a single PHY port for a timer command
  * @hw: pointer to HW struct
  * @port: Port to which cmd has to be sent
  * @cmd: Command to be sent to the port
  *
  * Prepare the requested port for an upcoming timer sync command.
  *
- * Note there is no equivalent of this operation on E810, as that device
- * always handles all external PHYs internally.
+ * Do not use this function directly. If you want to configure exactly one
+ * port, use ice_ptp_one_port_cmd() instead.
  */
 static int
-ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd)
+ice_ptp_write_port_cmd_e822(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd)
 {
 	u32 cmd_val, val;
 	u8 tmr_idx;
@@ -1235,6 +1237,8 @@ ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd)
 	case ADJ_TIME_AT_TIME:
 		cmd_val |= PHY_CMD_ADJ_TIME_AT_TIME;
 		break;
+	case ICE_PTP_NOP:
+		break;
 	}
 
 	/* Tx case */
@@ -1280,6 +1284,39 @@ ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd)
 	return 0;
 }
 
+/**
+ * ice_ptp_one_port_cmd - Prepare one port for a timer command
+ * @hw: pointer to the HW struct
+ * @configured_port: the port to configure with configured_cmd
+ * @configured_cmd: timer command to prepare on the configured_port
+ *
+ * Prepare the configured_port for the configured_cmd, and prepare all other
+ * ports for ICE_PTP_NOP. This causes the configured_port to execute the
+ * desired command while all other ports perform no operation.
+ */
+static int
+ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port,
+		     enum ice_ptp_tmr_cmd configured_cmd)
+{
+	u8 port;
+
+	for (port = 0; port < ICE_NUM_EXTERNAL_PORTS; port++) {
+		enum ice_ptp_tmr_cmd cmd;
+		int err;
+
+		if (port == configured_port)
+			cmd = configured_cmd;
+		else
+			cmd = ICE_PTP_NOP;
+
+		err = ice_ptp_write_port_cmd_e822(hw, port, cmd);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 /**
  * ice_ptp_port_cmd_e822 - Prepare all ports for a timer command
  * @hw: pointer to the HW struct
@@ -1296,7 +1333,7 @@ ice_ptp_port_cmd_e822(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
 	for (port = 0; port < ICE_NUM_EXTERNAL_PORTS; port++) {
 		int err;
 
-		err = ice_ptp_one_port_cmd(hw, port, cmd);
+		err = ice_ptp_write_port_cmd_e822(hw, port, cmd);
 		if (err)
 			return err;
 	}
@@ -2245,6 +2282,9 @@ static int ice_sync_phy_timer_e822(struct ice_hw *hw, u8 port)
 	if (err)
 		goto err_unlock;
 
+	/* Do not perform any action on the main timer */
+	ice_ptp_src_cmd(hw, ICE_PTP_NOP);
+
 	/* Issue the sync to activate the time adjustment */
 	ice_ptp_exec_tmr_cmd(hw);
 
@@ -2371,6 +2411,9 @@ ice_start_phy_timer_e822(struct ice_hw *hw, u8 port, bool bypass)
 	if (err)
 		return err;
 
+	/* Do not perform any action on the main timer */
+	ice_ptp_src_cmd(hw, ICE_PTP_NOP);
+
 	ice_ptp_exec_tmr_cmd(hw);
 
 	err = ice_read_phy_reg_e822(hw, port, P_REG_PS, &val);
@@ -2914,6 +2957,8 @@ static int ice_ptp_port_cmd_e810(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
 	case ADJ_TIME_AT_TIME:
 		cmd_val = GLTSYN_CMD_ADJ_INIT_TIME;
 		break;
+	case ICE_PTP_NOP:
+		return 0;
 	}
 
 	/* Read, modify, write */
drivers/net/ethernet/intel/ice/ice_ptp_hw.h +2 -1
index 2bda64c76abc3..071f545aa85e8 100644
@@ -9,7 +9,8 @@ enum ice_ptp_tmr_cmd {
 	INIT_INCVAL,
 	ADJ_TIME,
 	ADJ_TIME_AT_TIME,
-	READ_TIME
+	READ_TIME,
+	ICE_PTP_NOP,
 };
 
 enum ice_ptp_serdes {
Signature · 1 line
2.40.1
author maintainer
#200 lore raw

PATCH 200/600 net: arcnet: Do not call kfree_skb() under local_irq_disable()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <[email protected]>

[ Upstream commit 786c96e92fb9e854cb8b0cb7399bb2fb28e15c4b ]

It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under local_irq_disable(). Compile tested only.

Fixes 05fcd31cc472 ("arcnet: add err_skb package for package status feedback")
---
 drivers/net/arcnet/arcnet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/arcnet/arcnet.c +1 -1
index 1bad1866ae462..a48220f91a2df 100644
@@ -468,7 +468,7 @@ static void arcnet_reply_tasklet(struct tasklet_struct *t)
 
 	ret = sock_queue_err_skb(sk, ackskb);
 	if (ret)
-		kfree_skb(ackskb);
+		dev_kfree_skb_irq(ackskb);
 
 	local_irq_enable();
 };
Signature · 1 line
2.40.1
author maintainer
#201 lore raw

PATCH 201/600 mlxsw: i2c: Fix chunk size setting in output mailbox buffer

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vadim Pasternak <[email protected]>

[ Upstream commit 146c7c330507c0384bf29d567186632bfe975927 ]

The driver reads commands output from the output mailbox. If the size of the output mailbox is not a multiple of the transaction / block size, then the driver will not issue enough read transactions to read the entire output, which can result in driver initialization errors.

Fix by determining the number of transactions using DIV_ROUND_UP().

Fixes 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
---
 drivers/net/ethernet/mellanox/mlxsw/i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/i2c.c +1 -1
index f5f5f8dc3d190..26e05f129e35a 100644
@@ -444,7 +444,7 @@ mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
 	} else {
 		/* No input mailbox is case of initialization query command. */
 		reg_size = MLXSW_I2C_MAX_DATA_SIZE;
-		num = reg_size / mlxsw_i2c->block_size;
+		num = DIV_ROUND_UP(reg_size, mlxsw_i2c->block_size);
 
 		if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
 			dev_err(&client->dev, "Could not acquire lock");
Signature · 1 line
2.40.1
author maintainer
#202 lore raw

PATCH 202/600 mlxsw: i2c: Limit single transaction buffer size

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vadim Pasternak <[email protected]>

[ Upstream commit d7248f1cc835bd80e936dc5b2d94b149bdd0077d ]

Maximum size of buffer is obtained from underlying I2C adapter and in case adapter allows I2C transaction buffer size greater than 100 bytes, transaction will fail due to firmware limitation.

As a result driver will fail initialization.

Limit the maximum size of transaction buffer by 100 bytes to fit to firmware.

Remove unnecessary calculation:
max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size).
This condition can not happened.

Fixes 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
---
 drivers/net/ethernet/mellanox/mlxsw/i2c.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/i2c.c +2 -1
index 26e05f129e35a..3beefc167da91 100644
@@ -48,6 +48,7 @@
 #define MLXSW_I2C_MBOX_SIZE_BITS	12
 #define MLXSW_I2C_ADDR_BUF_SIZE		4
 #define MLXSW_I2C_BLK_DEF		32
+#define MLXSW_I2C_BLK_MAX		100
 #define MLXSW_I2C_RETRY			5
 #define MLXSW_I2C_TIMEOUT_MSECS		5000
 #define MLXSW_I2C_MAX_DATA_SIZE		256
@@ -653,7 +654,7 @@ static int mlxsw_i2c_probe(struct i2c_client *client,
 			return -EOPNOTSUPP;
 		}
 
-		mlxsw_i2c->block_size = max_t(u16, MLXSW_I2C_BLK_DEF,
+		mlxsw_i2c->block_size = min_t(u16, MLXSW_I2C_BLK_MAX,
 					      min_t(u16, quirks->max_read_len,
 						    quirks->max_write_len));
 	} else {
Signature · 1 line
2.40.1
author maintainer
#203 lore raw

PATCH 203/600 mlxsw: core_hwmon: Adjust module label names based on MTCAP sensor counter

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vadim Pasternak <[email protected]>

[ Upstream commit 3fc134a07438055fc93ce1bbacf2702ddd09500c ]

Transceiver module temperature sensors are indexed after ASIC and platform sensors. The current label printing method does not take this into account and simply prints the index of the transceiver module sensor.

On new systems that have platform sensors this results in incorrect (shifted) transceiver module labels being printed:

$ sensors
[...]
front panel 002:  +37.0°C  (crit = +70.0°C, emerg = +75.0°C)
front panel 003:  +47.0°C  (crit = +70.0°C, emerg = +75.0°C)
[...]

Fix by taking the sensor count into account. After the fix:

$ sensors
[...]
front panel 001:  +37.0°C  (crit = +70.0°C, emerg = +75.0°C)
front panel 002:  +47.0°C  (crit = +70.0°C, emerg = +75.0°C)
[...]
Fixes a53779de6a0e ("mlxsw: core: Add QSFP module temperature label attribute to hwmon")
---
 drivers/net/ethernet/mellanox/mlxsw/core_hwmon.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/core_hwmon.c +2 -1
index 70735068cf292..0fd290d776ffe 100644
@@ -405,7 +405,8 @@ mlxsw_hwmon_module_temp_label_show(struct device *dev,
 			container_of(attr, struct mlxsw_hwmon_attr, dev_attr);
 
 	return sprintf(buf, "front panel %03u\n",
-		       mlxsw_hwmon_attr->type_index);
+		       mlxsw_hwmon_attr->type_index + 1 -
+		       mlxsw_hwmon_attr->mlxsw_hwmon_dev->sensor_count);
 }
 
 static ssize_t
Signature · 1 line
2.40.1
author maintainer
#204 lore raw

PATCH 204/600 hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Biju Das <[email protected]>

[ Upstream commit d103337e38e7e64c3d915029e947b1cb0b512737 ]

The supported channels for this driver are {0..3}. Fix the incorrect channel in tmp51x_is_visible().

---
 drivers/hwmon/tmp513.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/tmp513.c +1 -1
index 7d5f7441aceb1..b9a93ee9c2364 100644
@@ -434,7 +434,7 @@ static umode_t tmp51x_is_visible(const void *_data,
 
 	switch (type) {
 	case hwmon_temp:
-		if (data->id == tmp512 && channel == 4)
+		if (data->id == tmp512 && channel == 3)
 			return 0;
 		switch (attr) {
 		case hwmon_temp_input:
Signature · 1 line
2.40.1
author maintainer
#205 lore raw

PATCH 205/600 octeontx2-pf: Refactor schedular queue alloc/free calls

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hariprasad Kelam <[email protected]>

[ Upstream commit 6b4b2ded9c4282deea421eef144ab0ced954721c ]

1. Upon txschq free request, the transmit schedular config in hardware is not getting reset. This patch adds necessary changes to do the same.

2. Current implementation calls txschq alloc during interface initialization and in response handler updates the default txschq array. This creates a problem for htb offload where txsch alloc will be called for every tc class. This patch addresses the issue by reading txschq response in mbox caller function instead in the response handler.

3. Current otx2_txschq_stop routine tries to free all txschq nodes allocated to the interface. This creates a problem for htb offload. This patch introduces the otx2_txschq_free_one to free txschq in a given level.

Stable-dep-of: a9ac2e187795 ("octeontx2-pf: Fix PFC TX scheduler free")

---
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 45 +++++++++++++
 .../marvell/octeontx2/nic/otx2_common.c       | 67 ++++++++++++-------
 .../marvell/octeontx2/nic/otx2_common.h       |  3 +-
 .../ethernet/marvell/octeontx2/nic/otx2_pf.c  | 13 +---
 .../ethernet/marvell/octeontx2/nic/otx2_vf.c  |  4 --
 5 files changed, 94 insertions(+), 38 deletions(-)
drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +45 -0
index 5541e284cd3f0..c85e0180d96da 100644
@@ -1691,6 +1691,42 @@ handle_txschq_shaper_update(struct rvu *rvu, int blkaddr, int nixlf,
 	return true;
 }
 
+static void nix_reset_tx_schedule(struct rvu *rvu, int blkaddr,
+				  int lvl, int schq)
+{
+	u64 tlx_parent = 0, tlx_schedule = 0;
+
+	switch (lvl) {
+	case NIX_TXSCH_LVL_TL2:
+		tlx_parent   = NIX_AF_TL2X_PARENT(schq);
+		tlx_schedule = NIX_AF_TL2X_SCHEDULE(schq);
+		break;
+	case NIX_TXSCH_LVL_TL3:
+		tlx_parent   = NIX_AF_TL3X_PARENT(schq);
+		tlx_schedule = NIX_AF_TL3X_SCHEDULE(schq);
+		break;
+	case NIX_TXSCH_LVL_TL4:
+		tlx_parent   = NIX_AF_TL4X_PARENT(schq);
+		tlx_schedule = NIX_AF_TL4X_SCHEDULE(schq);
+		break;
+	case NIX_TXSCH_LVL_MDQ:
+		/* no need to reset SMQ_CFG as HW clears this CSR
+		 * on SMQ flush
+		 */
+		tlx_parent   = NIX_AF_MDQX_PARENT(schq);
+		tlx_schedule = NIX_AF_MDQX_SCHEDULE(schq);
+		break;
+	default:
+		return;
+	}
+
+	if (tlx_parent)
+		rvu_write64(rvu, blkaddr, tlx_parent, 0x0);
+
+	if (tlx_schedule)
+		rvu_write64(rvu, blkaddr, tlx_schedule, 0x0);
+}
+
 /* Disable shaping of pkts by a scheduler queue
  * at a given scheduler level.
  */
@@ -2040,6 +2076,7 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
 				pfvf_map[schq] = TXSCH_MAP(pcifunc, 0);
 			nix_reset_tx_linkcfg(rvu, blkaddr, lvl, schq);
 			nix_reset_tx_shaping(rvu, blkaddr, nixlf, lvl, schq);
+			nix_reset_tx_schedule(rvu, blkaddr, lvl, schq);
 		}
 
 		for (idx = 0; idx < req->schq[lvl]; idx++) {
@@ -2049,6 +2086,7 @@ int rvu_mbox_handler_nix_txsch_alloc(struct rvu *rvu,
 				pfvf_map[schq] = TXSCH_MAP(pcifunc, 0);
 			nix_reset_tx_linkcfg(rvu, blkaddr, lvl, schq);
 			nix_reset_tx_shaping(rvu, blkaddr, nixlf, lvl, schq);
+			nix_reset_tx_schedule(rvu, blkaddr, lvl, schq);
 		}
 	}
 
@@ -2137,6 +2175,7 @@ static int nix_txschq_free(struct rvu *rvu, u16 pcifunc)
 				continue;
 			nix_reset_tx_linkcfg(rvu, blkaddr, lvl, schq);
 			nix_clear_tx_xoff(rvu, blkaddr, lvl, schq);
+			nix_reset_tx_shaping(rvu, blkaddr, nixlf, lvl, schq);
 		}
 	}
 	nix_clear_tx_xoff(rvu, blkaddr, NIX_TXSCH_LVL_TL1,
@@ -2175,6 +2214,7 @@ static int nix_txschq_free(struct rvu *rvu, u16 pcifunc)
 		for (schq = 0; schq < txsch->schq.max; schq++) {
 			if (TXSCH_MAP_FUNC(txsch->pfvf_map[schq]) != pcifunc)
 				continue;
+			nix_reset_tx_schedule(rvu, blkaddr, lvl, schq);
 			rvu_free_rsrc(&txsch->schq, schq);
 			txsch->pfvf_map[schq] = TXSCH_MAP(0, NIX_TXSCHQ_FREE);
 		}
@@ -2234,6 +2274,9 @@ static int nix_txschq_free_one(struct rvu *rvu,
 	 */
 	nix_clear_tx_xoff(rvu, blkaddr, lvl, schq);
 
+	nix_reset_tx_linkcfg(rvu, blkaddr, lvl, schq);
+	nix_reset_tx_shaping(rvu, blkaddr, nixlf, lvl, schq);
+
 	/* Flush if it is a SMQ. Onus of disabling
 	 * TL2/3 queue links before SMQ flush is on user
 	 */
@@ -2243,6 +2286,8 @@ static int nix_txschq_free_one(struct rvu *rvu,
 		goto err;
 	}
 
+	nix_reset_tx_schedule(rvu, blkaddr, lvl, schq);
+
 	/* Free the resource */
 	rvu_free_rsrc(&txsch->schq, schq);
 	txsch->pfvf_map[schq] = TXSCH_MAP(0, NIX_TXSCHQ_FREE);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +44 -23

105 lines not on this page · raw message

drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +2 -1
index 241016ca64d05..8a9793b06769f 100644
@@ -917,7 +917,8 @@ int otx2_config_nix(struct otx2_nic *pfvf);
 int otx2_config_nix_queues(struct otx2_nic *pfvf);
 int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool pfc_en);
 int otx2_txsch_alloc(struct otx2_nic *pfvf);
-int otx2_txschq_stop(struct otx2_nic *pfvf);
+void otx2_txschq_stop(struct otx2_nic *pfvf);
+void otx2_txschq_free_one(struct otx2_nic *pfvf, u16 lvl, u16 schq);
 void otx2_sqb_flush(struct otx2_nic *pfvf);
 int __otx2_alloc_rbuf(struct otx2_nic *pfvf, struct otx2_pool *pool,
 		      dma_addr_t *dma);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +3 -10
index c236dba80ff1a..17e546d0d7e55 100644
@@ -791,10 +791,6 @@ static void otx2_process_pfaf_mbox_msg(struct otx2_nic *pf,
 	case MBOX_MSG_NIX_LF_ALLOC:
 		mbox_handler_nix_lf_alloc(pf, (struct nix_lf_alloc_rsp *)msg);
 		break;
-	case MBOX_MSG_NIX_TXSCH_ALLOC:
-		mbox_handler_nix_txsch_alloc(pf,
-					     (struct nix_txsch_alloc_rsp *)msg);
-		break;
 	case MBOX_MSG_NIX_BP_ENABLE:
 		mbox_handler_nix_bp_enable(pf, (struct nix_bp_cfg_rsp *)msg);
 		break;
@@ -1517,8 +1513,7 @@ static int otx2_init_hw_resources(struct otx2_nic *pf)
 	otx2_free_cq_res(pf);
 	otx2_ctx_disable(mbox, NIX_AQ_CTYPE_RQ, false);
 err_free_txsch:
-	if (otx2_txschq_stop(pf))
-		dev_err(pf->dev, "%s failed to stop TX schedulers\n", __func__);
+	otx2_txschq_stop(pf);
 err_free_sq_ptrs:
 	otx2_sq_free_sqbs(pf);
 err_free_rq_ptrs:
@@ -1553,15 +1548,13 @@ static void otx2_free_hw_resources(struct otx2_nic *pf)
 	struct mbox *mbox = &pf->mbox;
 	struct otx2_cq_queue *cq;
 	struct msg_req *req;
-	int qidx, err;
+	int qidx;
 
 	/* Ensure all SQE are processed */
 	otx2_sqb_flush(pf);
 
 	/* Stop transmission */
-	err = otx2_txschq_stop(pf);
-	if (err)
-		dev_err(pf->dev, "RVUPF: Failed to stop/free TX schedulers\n");
+	otx2_txschq_stop(pf);
 
 #ifdef CONFIG_DCB
 	if (pf->pfc_en)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c +0 -4
index 53366dbfbf27c..f8f0c01f62a14 100644
@@ -70,10 +70,6 @@ static void otx2vf_process_vfaf_mbox_msg(struct otx2_nic *vf,
 	case MBOX_MSG_NIX_LF_ALLOC:
 		mbox_handler_nix_lf_alloc(vf, (struct nix_lf_alloc_rsp *)msg);
 		break;
-	case MBOX_MSG_NIX_TXSCH_ALLOC:
-		mbox_handler_nix_txsch_alloc(vf,
-					     (struct nix_txsch_alloc_rsp *)msg);
-		break;
 	case MBOX_MSG_NIX_BP_ENABLE:
 		mbox_handler_nix_bp_enable(vf, (struct nix_bp_cfg_rsp *)msg);
 		break;
Signature · 1 line
2.40.1
author maintainer
#206 lore raw

PATCH 206/600 octeontx2-pf: Fix PFC TX scheduler free

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Suman Ghosh <[email protected]>

[ Upstream commit a9ac2e18779597f280d68a5b5f5bdd51a34080fa ]

During PFC TX schedulers free, flag TXSCHQ_FREE_ALL was being set which caused free up all schedulers other than the PFC schedulers. This patch fixes that to free only the PFC Tx schedulers.

---
 .../ethernet/marvell/octeontx2/nic/otx2_common.c  |  1 +
 .../ethernet/marvell/octeontx2/nic/otx2_dcbnl.c   | 15 ++++-----------
 2 files changed, 5 insertions(+), 11 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +1 -0
index dd97731f81698..011355e73696e 100644
@@ -773,6 +773,7 @@ void otx2_txschq_free_one(struct otx2_nic *pfvf, u16 lvl, u16 schq)
 
 	mutex_unlock(&pfvf->mbox.lock);
 }
+EXPORT_SYMBOL(otx2_txschq_free_one);
 
 void otx2_txschq_stop(struct otx2_nic *pfvf)
 {
drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c +4 -11
index ccaf97bb1ce03..6492749dd7c89 100644
@@ -125,19 +125,12 @@ int otx2_pfc_txschq_alloc(struct otx2_nic *pfvf)
 
 static int otx2_pfc_txschq_stop_one(struct otx2_nic *pfvf, u8 prio)
 {
-	struct nix_txsch_free_req *free_req;
+	int lvl;
 
-	mutex_lock(&pfvf->mbox.lock);
 	/* free PFC TLx nodes */
-	free_req = otx2_mbox_alloc_msg_nix_txsch_free(&pfvf->mbox);
-	if (!free_req) {
-		mutex_unlock(&pfvf->mbox.lock);
-		return -ENOMEM;
-	}
-
-	free_req->flags = TXSCHQ_FREE_ALL;
-	otx2_sync_mbox_msg(&pfvf->mbox);
-	mutex_unlock(&pfvf->mbox.lock);
+	for (lvl = 0; lvl < pfvf->hw.txschq_link_cfg_lvl; lvl++)
+		otx2_txschq_free_one(pfvf, lvl,
+				     pfvf->pfc_schq_list[lvl][prio]);
 
 	pfvf->pfc_alloc_status[prio] = false;
 	return 0;
Signature · 1 line
2.40.1
author maintainer
#207 lore raw

PATCH 207/600 cteonxt2-pf: Fix backpressure config for multiple PFC priorities to work simultaneously

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Suman Ghosh <[email protected]>

[ Upstream commit 597d0ec0e4ca6a912affea4cc94df08959e9ec74 ]

MAC (CGX or RPM) asserts backpressure at TL3 or TL2 node of the egress hierarchical scheduler tree depending on link level config done. If there are multiple PFC priorities enabled at a time and for all such flows to backoff, each priority will have to assert backpressure at different TL3/TL2 scheduler nodes and these flows will need to submit egress pkts to these nodes.

Current PFC configuration has an issue where in only one backpressure scheduler node is being allocated which is resulting in only one PFC priority to work. This patch fixes this issue.

---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_dcbnl.c +3 -3
index 6492749dd7c89..bfddbff7bcdfb 100644
@@ -70,7 +70,7 @@ static int otx2_pfc_txschq_alloc_one(struct otx2_nic *pfvf, u8 prio)
 	 * link config level. These rest of the scheduler can be
 	 * same as hw.txschq_list.
 	 */
-	for (lvl = 0; lvl < pfvf->hw.txschq_link_cfg_lvl; lvl++)
+	for (lvl = 0; lvl <= pfvf->hw.txschq_link_cfg_lvl; lvl++)
 		req->schq[lvl] = 1;
 
 	rc = otx2_sync_mbox_msg(&pfvf->mbox);
@@ -83,7 +83,7 @@ static int otx2_pfc_txschq_alloc_one(struct otx2_nic *pfvf, u8 prio)
 		return PTR_ERR(rsp);
 
 	/* Setup transmit scheduler list */
-	for (lvl = 0; lvl < pfvf->hw.txschq_link_cfg_lvl; lvl++) {
+	for (lvl = 0; lvl <= pfvf->hw.txschq_link_cfg_lvl; lvl++) {
 		if (!rsp->schq[lvl])
 			return -ENOSPC;
 
@@ -128,7 +128,7 @@ static int otx2_pfc_txschq_stop_one(struct otx2_nic *pfvf, u8 prio)
 	int lvl;
 
 	/* free PFC TLx nodes */
-	for (lvl = 0; lvl < pfvf->hw.txschq_link_cfg_lvl; lvl++)
+	for (lvl = 0; lvl <= pfvf->hw.txschq_link_cfg_lvl; lvl++)
 		otx2_txschq_free_one(pfvf, lvl,
 				     pfvf->pfc_schq_list[lvl][prio]);
 
Signature · 1 line
2.40.1
author maintainer
#208 lore raw

PATCH 208/600 sfc: Check firmware supports Ethernet PTP filter

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Austin <[email protected]>

[ Upstream commit c4413a20fa6d7c4888009fb7dd391685f196cd36 ]

Not all firmware variants support RSS filters. Do not fail all PTP functionality when raw ethernet PTP filters fail to insert.

---
 drivers/net/ethernet/sfc/ptp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/sfc/ptp.c +2 -1
index eaef4a15008a3..692c7f132e9f9 100644
@@ -1387,7 +1387,8 @@ static int efx_ptp_insert_multicast_filters(struct efx_nic *efx)
 			goto fail;
 
 		rc = efx_ptp_insert_eth_filter(efx);
-		if (rc < 0)
+		/* Not all firmware variants support this filter */
+		if (rc < 0 && rc != -EPROTONOSUPPORT)
 			goto fail;
 	}
 
Signature · 1 line
2.40.1
author maintainer
#209 lore raw

PATCH 209/600 net/sched: sch_hfsc: Ensure inner classes have fsc curve

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Budimir Markovic <[email protected]>

[ Upstream commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f ]

HFSC assumes that inner classes have an fsc curve, but it is currently possible for classes without an fsc curve to become parents. This leads to bugs including a use-after-free.

Don't allow non-root classes without HFSC_FSC to become parents.

---
 net/sched/sch_hfsc.c | 4 ++++
 1 file changed, 4 insertions(+)
net/sched/sch_hfsc.c +4 -0
index 70b0c5873d326..61d52594ff6d8 100644
@@ -1012,6 +1012,10 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 		if (parent == NULL)
 			return -ENOENT;
 	}
+	if (!(parent->cl_flags & HFSC_FSC) && parent != &q->root) {
+		NL_SET_ERR_MSG(extack, "Invalid parent - parent class must have FSC");
+		return -EINVAL;
+	}
 
 	if (classid == 0 || TC_H_MAJ(classid ^ sch->handle) != 0)
 		return -EINVAL;
Signature · 1 line
2.40.1
author maintainer
#210 lore raw

PATCH 210/600 netrom: Deny concurrent connect().

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit c2f8fd7949603efb03908e05abbf7726748c8de3 ]

syzkaller reported null-ptr-deref [0] related to AF_NETROM. This is another self-accept issue from the strace log. [1]

syz-executor creates an AF_NETROM socket and calls connect(), which is blocked at that time. Then, sk->sk_state is TCP_SYN_SENT and sock->state is SS_CONNECTING.

[pid 5059] socket(AF_NETROM, SOCK_SEQPACKET, 0) = 4
[pid 5059] connect(4, {sa_family=AF_NETROM, sa_data="..." <unfinished ...>

Another thread calls connect() concurrently, which finally fails with -EINVAL. However, the problem here is the socket state is reset even while the first connect() is blocked.

[pid 5060] connect(4, NULL, 0 <unfinished ...>
[pid 5060] <... connect resumed>) = -1 EINVAL (Invalid argument)

As sk->state is TCP_CLOSE and sock->state is SS_UNCONNECTED, the following listen() succeeds. Then, the first connect() looks up itself as a listener and puts skb into the queue with skb->sk itself. As a result, the next accept() gets another FD of itself as 3, and the first connect() finishes.

  [pid  5060] listen(4, 0 <unfinished ...>
  [pid  5060] <... listen resumed>)       = 0
  [pid  5060] accept(4, NULL, NULL <unfinished ...>
  [pid  5060] <... accept resumed>)       = 3
  [pid  5059] <... connect resumed>)      = 0

Then, accept4() is called but blocked, which causes the general protection fault later.

[pid 5059] accept4(4, NULL, 0x20000400, SOCK_NONBLOCK <unfinished ...>

After that, another self-accept occurs by accept() and writev().

  [pid  5060] accept(4, NULL, NULL <unfinished ...>
  [pid  5061] writev(3, [{iov_base=...}] <unfinished ...>
  [pid  5061] <... writev resumed>)       = 99
  [pid  5060] <... accept resumed>)       = 6

Finally, the leader thread close()s all FDs. Since the three FDs reference the same socket, nr_release() does the cleanup for it three times, and the remaining accept4() causes the following fault.

  [pid  5058] close(3)                    = 0
  [pid  5058] close(4)                    = 0
  [pid  5058] close(5)                    = -1 EBADF (Bad file descriptor)
  [pid  5058] close(6)                    = 0
  [pid  5058] <... exit_group resumed>)   = ?
  [   83.456055][ T5059] general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN

To avoid the issue, we need to return an error for connect() if another connect() is in progress, as done in __inet_stream_connect().

[0]:

general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 5059 Comm: syz-executor.0 Not tainted 6.5.0-rc5-syzkaller-00194-gace0ab3a4b54 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5012
Code: 45 85 c9 0f 84 cc 0e 00 00 44 8b 05 11 6e 23 0b 45 85 c0 0f 84 be 0d 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 d1 48 c1 e9 03 <80> 3c 11 00 0f 85 e8 40 00 00 49 81 3a a0 69 48 90 0f 84 96 0d 00
RSP: 0018:ffffc90003d6f9e0 EFLAGS: 00010006
RAX: ffff8880244c8000 RBX: 1ffff920007adf6c RCX: 0000000000000003
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000018
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000018 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f51d519a6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f51d5158d58 CR3: 000000002943f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 lock_acquire kernel/locking/lockdep.c:5761 [inline]
 lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x3a/0x50 kernel/locking/spinlock.c:162
 prepare_to_wait+0x47/0x380 kernel/sched/wait.c:269
 nr_accept+0x20d/0x650 net/netrom/af_netrom.c:798
 do_accept+0x3a6/0x570 net/socket.c:1872
 __sys_accept4_file net/socket.c:1913 [inline]
 __sys_accept4+0x99/0x120 net/socket.c:1943
 __do_sys_accept4 net/socket.c:1954 [inline]
 __se_sys_accept4 net/socket.c:1951 [inline]
 __x64_sys_accept4+0x96/0x100 net/socket.c:1951
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f51d447cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f51d519a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000120
RAX: ffffffffffffffda RBX: 00007f51d459bf80 RCX: 00007f51d447cae9
RDX: 0000000020000400 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007f51d44c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000800 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f51d459bf80 R15: 00007ffc25c34e48
 </TASK>
---
 net/netrom/af_netrom.c | 5 +++++
 1 file changed, 5 insertions(+)
net/netrom/af_netrom.c +5 -0
index 5a4cb796150f5..ec5747969f964 100644
@@ -660,6 +660,11 @@ static int nr_connect(struct socket *sock, struct sockaddr *uaddr,
 		goto out_release;
 	}
 
+	if (sock->state == SS_CONNECTING) {
+		err = -EALREADY;
+		goto out_release;
+	}
+
 	sk->sk_state   = TCP_CLOSE;
 	sock->state = SS_UNCONNECTED;
 
Signature · 1 line
2.40.1
author maintainer
#211 lore raw

PATCH 211/600 drm/bridge: tc358764: Fix debug print parameter order

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut <[email protected]>

[ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ]

The debug print parameters were swapped in the output and they were printed as decimal values, both the hardware address and the value. Update the debug print to print the parameters in correct order, and use hexadecimal print for both address and value.

Fixes f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
---
 drivers/gpu/drm/bridge/tc358764.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tc358764.c +1 -1
index 53259c12d7778..e0f583a88789d 100644
@@ -176,7 +176,7 @@ static void tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val)
 	if (ret >= 0)
 		le32_to_cpus(val);
 
-	dev_dbg(ctx->dev, "read: %d, addr: %d\n", addr, *val);
+	dev_dbg(ctx->dev, "read: addr=0x%04x data=0x%08x\n", addr, *val);
 }
 
 static void tc358764_write(struct tc358764 *ctx, u16 addr, u32 val)
Signature · 1 line
2.40.1
author maintainer
#212 lore raw

PATCH 212/600 ASoC: cs43130: Fix numerator/denominator mixup

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Phil Elwell <[email protected]>

[ Upstream commit a9e7c964cea4fb1541cc81a11d1b2fd135f4cf38 ]

In converting to using the standard u16_fract type, commit [1] made the obvious mistake and failed to take account of the difference in numerator and denominator ordering, breaking all uses of the cs43130 codec.

Fix it.

[1] commit e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract")

---
 sound/soc/codecs/cs43130.h | 138 ++++++++++++++++++-------------------
 1 file changed, 69 insertions(+), 69 deletions(-)
sound/soc/codecs/cs43130.h +69 -69
index 1dd8936743132..90e8895275e77 100644
@@ -381,88 +381,88 @@ struct cs43130_clk_gen {
 
 /* frm_size = 16 */
 static const struct cs43130_clk_gen cs43130_16_clk_gen[] = {
-	{ 22579200,	32000,		.v = { 441,	10, }, },
-	{ 22579200,	44100,		.v = { 32,	1, }, },
-	{ 22579200,	48000,		.v = { 147,	5, }, },
-	{ 22579200,	88200,		.v = { 16,	1, }, },
-	{ 22579200,	96000,		.v = { 147,	10, }, },
-	{ 22579200,	176400,		.v = { 8,	1, }, },
-	{ 22579200,	192000,		.v = { 147,	20, }, },
-	{ 22579200,	352800,		.v = { 4,	1, }, },
-	{ 22579200,	384000,		.v = { 147,	40, }, },
-	{ 24576000,	32000,		.v = { 48,	1, }, },
-	{ 24576000,	44100,		.v = { 5120,	147, }, },
-	{ 24576000,	48000,		.v = { 32,	1, }, },
-	{ 24576000,	88200,		.v = { 2560,	147, }, },
-	{ 24576000,	96000,		.v = { 16,	1, }, },
-	{ 24576000,	176400,		.v = { 1280,	147, }, },
-	{ 24576000,	192000,		.v = { 8,	1, }, },
-	{ 24576000,	352800,		.v = { 640,	147, }, },
-	{ 24576000,	384000,		.v = { 4,	1, }, },
+	{ 22579200,	32000,		.v = { 10,	441, }, },
+	{ 22579200,	44100,		.v = { 1,	32, }, },
+	{ 22579200,	48000,		.v = { 5,	147, }, },
+	{ 22579200,	88200,		.v = { 1,	16, }, },
+	{ 22579200,	96000,		.v = { 10,	147, }, },
+	{ 22579200,	176400,		.v = { 1,	8, }, },
+	{ 22579200,	192000,		.v = { 20,	147, }, },
+	{ 22579200,	352800,		.v = { 1,	4, }, },
+	{ 22579200,	384000,		.v = { 40,	147, }, },
+	{ 24576000,	32000,		.v = { 1,	48, }, },
+	{ 24576000,	44100,		.v = { 147,	5120, }, },
+	{ 24576000,	48000,		.v = { 1,	32, }, },
+	{ 24576000,	88200,		.v = { 147,	2560, }, },
+	{ 24576000,	96000,		.v = { 1,	16, }, },
+	{ 24576000,	176400,		.v = { 147,	1280, }, },
+	{ 24576000,	192000,		.v = { 1,	8, }, },
+	{ 24576000,	352800,		.v = { 147,	640, }, },
+	{ 24576000,	384000,		.v = { 1,	4, }, },
 };
 
 /* frm_size = 32 */
 static const struct cs43130_clk_gen cs43130_32_clk_gen[] = {
-	{ 22579200,	32000,		.v = { 441,	20, }, },
-	{ 22579200,	44100,		.v = { 16,	1, }, },
-	{ 22579200,	48000,		.v = { 147,	10, }, },
-	{ 22579200,	88200,		.v = { 8,	1, }, },
-	{ 22579200,	96000,		.v = { 147,	20, }, },
-	{ 22579200,	176400,		.v = { 4,	1, }, },
-	{ 22579200,	192000,		.v = { 147,	40, }, },
-	{ 22579200,	352800,		.v = { 2,	1, }, },
-	{ 22579200,	384000,		.v = { 147,	80, }, },
-	{ 24576000,	32000,		.v = { 24,	1, }, },
-	{ 24576000,	44100,		.v = { 2560,	147, }, },
-	{ 24576000,	48000,		.v = { 16,	1, }, },
-	{ 24576000,	88200,		.v = { 1280,	147, }, },
-	{ 24576000,	96000,		.v = { 8,	1, }, },
-	{ 24576000,	176400,		.v = { 640,	147, }, },
-	{ 24576000,	192000,		.v = { 4,	1, }, },
-	{ 24576000,	352800,		.v = { 320,	147, }, },
-	{ 24576000,	384000,		.v = { 2,	1, }, },
+	{ 22579200,	32000,		.v = { 20,	441, }, },
+	{ 22579200,	44100,		.v = { 1,	16, }, },
+	{ 22579200,	48000,		.v = { 10,	147, }, },
+	{ 22579200,	88200,		.v = { 1,	8, }, },
+	{ 22579200,	96000,		.v = { 20,	147, }, },
+	{ 22579200,	176400,		.v = { 1,	4, }, },
+	{ 22579200,	192000,		.v = { 40,	147, }, },
+	{ 22579200,	352800,		.v = { 1,	2, }, },
+	{ 22579200,	384000,		.v = { 80,	147, }, },
+	{ 24576000,	32000,		.v = { 1,	24, }, },
+	{ 24576000,	44100,		.v = { 147,	2560, }, },
+	{ 24576000,	48000,		.v = { 1,	16, }, },
+	{ 24576000,	88200,		.v = { 147,	1280, }, },
+	{ 24576000,	96000,		.v = { 1,	8, }, },
+	{ 24576000,	176400,		.v = { 147,	640, }, },
+	{ 24576000,	192000,		.v = { 1,	4, }, },
+	{ 24576000,	352800,		.v = { 147,	320, }, },
+	{ 24576000,	384000,		.v = { 1,	2, }, },
 };
 
 /* frm_size = 48 */
 static const struct cs43130_clk_gen cs43130_48_clk_gen[] = {
-	{ 22579200,	32000,		.v = { 147,	100, }, },
-	{ 22579200,	44100,		.v = { 32,	3, }, },
-	{ 22579200,	48000,		.v = { 49,	5, }, },
-	{ 22579200,	88200,		.v = { 16,	3, }, },
-	{ 22579200,	96000,		.v = { 49,	10, }, },
-	{ 22579200,	176400,		.v = { 8,	3, }, },
-	{ 22579200,	192000,		.v = { 49,	20, }, },
-	{ 22579200,	352800,		.v = { 4,	3, }, },
-	{ 22579200,	384000,		.v = { 49,	40, }, },
-	{ 24576000,	32000,		.v = { 16,	1, }, },
-	{ 24576000,	44100,		.v = { 5120,	441, }, },
-	{ 24576000,	48000,		.v = { 32,	3, }, },
-	{ 24576000,	88200,		.v = { 2560,	441, }, },
-	{ 24576000,	96000,		.v = { 16,	3, }, },
-	{ 24576000,	176400,		.v = { 1280,	441, }, },
-	{ 24576000,	192000,		.v = { 8,	3, }, },
-	{ 24576000,	352800,		.v = { 640,	441, }, },
-	{ 24576000,	384000,		.v = { 4,	3, }, },
+	{ 22579200,	32000,		.v = { 100,	147, }, },
+	{ 22579200,	44100,		.v = { 3,	32, }, },
+	{ 22579200,	48000,		.v = { 5,	49, }, },
+	{ 22579200,	88200,		.v = { 3,	16, }, },
+	{ 22579200,	96000,		.v = { 10,	49, }, },
+	{ 22579200,	176400,		.v = { 3,	8, }, },
+	{ 22579200,	192000,		.v = { 20,	49, }, },
+	{ 22579200,	352800,		.v = { 3,	4, }, },
+	{ 22579200,	384000,		.v = { 40,	49, }, },
+	{ 24576000,	32000,		.v = { 1,	16, }, },
+	{ 24576000,	44100,		.v = { 441,	5120, }, },
+	{ 24576000,	48000,		.v = { 3,	32, }, },
+	{ 24576000,	88200,		.v = { 441,	2560, }, },
+	{ 24576000,	96000,		.v = { 3,	16, }, },
+	{ 24576000,	176400,		.v = { 441,	1280, }, },
+	{ 24576000,	192000,		.v = { 3,	8, }, },
+	{ 24576000,	352800,		.v = { 441,	640, }, },
+	{ 24576000,	384000,		.v = { 3,	4, }, },
 };
 
 /* frm_size = 64 */
 static const struct cs43130_clk_gen cs43130_64_clk_gen[] = {
-	{ 22579200,	32000,		.v = { 441,	40, }, },
-	{ 22579200,	44100,		.v = { 8,	1, }, },
-	{ 22579200,	48000,		.v = { 147,	20, }, },
-	{ 22579200,	88200,		.v = { 4,	1, }, },
-	{ 22579200,	96000,		.v = { 147,	40, }, },
-	{ 22579200,	176400,		.v = { 2,	1, }, },
-	{ 22579200,	192000,		.v = { 147,	80, }, },
+	{ 22579200,	32000,		.v = { 40,	441, }, },
+	{ 22579200,	44100,		.v = { 1,	8, }, },
+	{ 22579200,	48000,		.v = { 20,	147, }, },
+	{ 22579200,	88200,		.v = { 1,	4, }, },
+	{ 22579200,	96000,		.v = { 40,	147, }, },
+	{ 22579200,	176400,		.v = { 1,	2, }, },
+	{ 22579200,	192000,		.v = { 80,	147, }, },
 	{ 22579200,	352800,		.v = { 1,	1, }, },
-	{ 24576000,	32000,		.v = { 12,	1, }, },
-	{ 24576000,	44100,		.v = { 1280,	147, }, },
-	{ 24576000,	48000,		.v = { 8,	1, }, },
-	{ 24576000,	88200,		.v = { 640,	147, }, },
-	{ 24576000,	96000,		.v = { 4,	1, }, },
-	{ 24576000,	176400,		.v = { 320,	147, }, },
-	{ 24576000,	192000,		.v = { 2,	1, }, },
-	{ 24576000,	352800,		.v = { 160,	147, }, },
+	{ 24576000,	32000,		.v = { 1,	12, }, },
+	{ 24576000,	44100,		.v = { 147,	1280, }, },
+	{ 24576000,	48000,		.v = { 1,	8, }, },
+	{ 24576000,	88200,		.v = { 147,	640, }, },
+	{ 24576000,	96000,		.v = { 1,	4, }, },
+	{ 24576000,	176400,		.v = { 147,	320, }, },
+	{ 24576000,	192000,		.v = { 1,	2, }, },
+	{ 24576000,	352800,		.v = { 147,	160, }, },
 	{ 24576000,	384000,		.v = { 1,	1, }, },
 };
 
Signature · 1 line
2.40.1
author maintainer
#213 lore raw

PATCH 213/600 drm: bridge: dw-mipi-dsi: Fix enable/disable of DSI controller

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ondrej Jirman <[email protected]>

[ Upstream commit 05aa61334592adb230749ff465b103ee10e63936 ]

Before this patch, booting to Linux VT and doing a simple:

echo 2 > /sys/class/graphics/fb0/blank
echo 0 > /sys/class/graphics/fb0/blank

would result in failures to re-enable the panel. Mode set callback is called only once during boot in this scenario, while calls to enable/disable callbacks are balanced afterwards. The driver doesn't work unless userspace calls modeset before enabling the CRTC/connector.

This patch moves enabling of the DSI host from mode_set into pre_enable callback, and removes some old hacks where this bridge driver is directly calling into other bridge driver's callbacks.

pre_enable_prev_first flag is set on the panel's bridge so that panel drivers will get their prepare function called between DSI host's pre_enable and enable callbacks, so that they get a chance to perform panel setup while DSI host is already enabled in command mode. Otherwise panel's prepare would be called before DSI host is enabled, and any DSI communication used in prepare callback would fail.

With all these changes, the enable/disable sequence is now well balanced, and host's and panel's callbacks are called in proper order documented in the drm_panel API documentation without needing the old hacks. (Mainly that panel->prepare is called when DSI host is ready to allow the panel driver to send DSI commands and vice versa during disable.)

Tested on Pinephone Pro. Trace of the callbacks follows.

Before:

[    1.253882] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.290732] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.475576] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.475593] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   13.722799] panel-himax-hx8394 ff960000.dsi.0: disable
[   13.774502] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   13.774526] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   17.735796] panel-himax-hx8394 ff960000.dsi.0: prepare
[   17.923522] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   17.923540] panel-himax-hx8394 ff960000.dsi.0: enable
[   17.944330] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[   17.944335] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[   17.944340] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

echo 2 > /sys/class/graphics/fb0/blank

[  431.148583] panel-himax-hx8394 ff960000.dsi.0: disable
[  431.169259] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  431.169268] panel-himax-hx8394 ff960000.dsi.0: Failed to enter sleep mode: -110
[  431.169282] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[  431.169316] panel-himax-hx8394 ff960000.dsi.0: unprepare
[  431.169357] pclk_mipi_dsi0 already disabled

echo 0 > /sys/class/graphics/fb0/blank

[  432.796851] panel-himax-hx8394 ff960000.dsi.0: prepare
[  432.981537] dw-mipi-dsi-rockchip ff960000.dsi: enable
[  432.981568] panel-himax-hx8394 ff960000.dsi.0: enable
[  433.002290] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  433.002299] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[  433.002312] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

-----------------------------------------------------------------------

After:

[    1.248372] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.248704] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[    1.285377] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.468392] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.468421] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   16.210357] panel-himax-hx8394 ff960000.dsi.0: disable
[   16.261315] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   16.261339] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   19.161453] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[   19.197869] panel-himax-hx8394 ff960000.dsi.0: prepare
[   19.382141] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   19.382158] panel-himax-hx8394 ff960000.dsi.0: enable

(But depends on functionality intorduced in Linux 6.3, so this patch will
not build on older kernels when applied to older stable branches.)

Fixes 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
---
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 28 +++++++++++--------
 1 file changed, 16 insertions(+), 12 deletions(-)
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +16 -12
index b2efecf7d1603..4291798bd70f5 100644
@@ -265,6 +265,7 @@ struct dw_mipi_dsi {
 	struct dw_mipi_dsi *master; /* dual-dsi master ptr */
 	struct dw_mipi_dsi *slave; /* dual-dsi slave ptr */
 
+	struct drm_display_mode mode;
 	const struct dw_mipi_dsi_plat_data *plat_data;
 };
 
@@ -332,6 +333,7 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
 	if (IS_ERR(bridge))
 		return PTR_ERR(bridge);
 
+	bridge->pre_enable_prev_first = true;
 	dsi->panel_bridge = bridge;
 
 	drm_bridge_add(&dsi->bridge);
@@ -859,15 +861,6 @@ static void dw_mipi_dsi_bridge_post_atomic_disable(struct drm_bridge *bridge,
 	 */
 	dw_mipi_dsi_set_mode(dsi, 0);
 
-	/*
-	 * TODO Only way found to call panel-bridge post_disable &
-	 * panel unprepare before the dsi "final" disable...
-	 * This needs to be fixed in the drm_bridge framework and the API
-	 * needs to be updated to manage our own call chains...
-	 */
-	if (dsi->panel_bridge->funcs->post_disable)
-		dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge);
-
 	if (phy_ops->power_off)
 		phy_ops->power_off(dsi->plat_data->priv_data);
 
@@ -942,15 +935,25 @@ static void dw_mipi_dsi_mode_set(struct dw_mipi_dsi *dsi,
 		phy_ops->power_on(dsi->plat_data->priv_data);
 }
 
+static void dw_mipi_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+						 struct drm_bridge_state *old_bridge_state)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	/* Power up the dsi ctl into a command mode */
+	dw_mipi_dsi_mode_set(dsi, &dsi->mode);
+	if (dsi->slave)
+		dw_mipi_dsi_mode_set(dsi->slave, &dsi->mode);
+}
+
 static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
 					const struct drm_display_mode *mode,
 					const struct drm_display_mode *adjusted_mode)
 {
 	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
 
-	dw_mipi_dsi_mode_set(dsi, adjusted_mode);
-	if (dsi->slave)
-		dw_mipi_dsi_mode_set(dsi->slave, adjusted_mode);
+	/* Store the display mode for later use in pre_enable callback */
+	drm_mode_copy(&dsi->mode, adjusted_mode);
 }
 
 static void dw_mipi_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
@@ -1004,6 +1007,7 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
 	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset		= drm_atomic_helper_bridge_reset,
+	.atomic_pre_enable	= dw_mipi_dsi_bridge_atomic_pre_enable,
 	.atomic_enable		= dw_mipi_dsi_bridge_atomic_enable,
 	.atomic_post_disable	= dw_mipi_dsi_bridge_post_atomic_disable,
 	.mode_set		= dw_mipi_dsi_bridge_mode_set,
Signature · 1 line
2.40.1
#214 lore raw

Re: [PATCH 6.1 213/600] drm: bridge: dw-mipi-dsi: Fix enable/disable of DSI controller

Quoted 2 lines · Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

See patch message comment:

(But depends on functionality intorduced in Linux 6.3, so this patch will
not build on older kernels when applied to older stable branches.)

kind regards,

	o.
Quoted 191 lines

------------------

From: Ondrej Jirman <[email protected]>

[ Upstream commit 05aa61334592adb230749ff465b103ee10e63936 ]

Before this patch, booting to Linux VT and doing a simple:

echo 2 > /sys/class/graphics/fb0/blank
echo 0 > /sys/class/graphics/fb0/blank

would result in failures to re-enable the panel. Mode set callback is called only once during boot in this scenario, while calls to enable/disable callbacks are balanced afterwards. The driver doesn't work unless userspace calls modeset before enabling the CRTC/connector.

This patch moves enabling of the DSI host from mode_set into pre_enable callback, and removes some old hacks where this bridge driver is directly calling into other bridge driver's callbacks.

pre_enable_prev_first flag is set on the panel's bridge so that panel drivers will get their prepare function called between DSI host's pre_enable and enable callbacks, so that they get a chance to perform panel setup while DSI host is already enabled in command mode. Otherwise panel's prepare would be called before DSI host is enabled, and any DSI communication used in prepare callback would fail.

With all these changes, the enable/disable sequence is now well balanced, and host's and panel's callbacks are called in proper order documented in the drm_panel API documentation without needing the old hacks. (Mainly that panel->prepare is called when DSI host is ready to allow the panel driver to send DSI commands and vice versa during disable.)

Tested on Pinephone Pro. Trace of the callbacks follows.

Before:

[    1.253882] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.290732] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.475576] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.475593] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   13.722799] panel-himax-hx8394 ff960000.dsi.0: disable
[   13.774502] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   13.774526] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   17.735796] panel-himax-hx8394 ff960000.dsi.0: prepare
[   17.923522] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   17.923540] panel-himax-hx8394 ff960000.dsi.0: enable
[   17.944330] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[   17.944335] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[   17.944340] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

echo 2 > /sys/class/graphics/fb0/blank

[  431.148583] panel-himax-hx8394 ff960000.dsi.0: disable
[  431.169259] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  431.169268] panel-himax-hx8394 ff960000.dsi.0: Failed to enter sleep mode: -110
[  431.169282] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[  431.169316] panel-himax-hx8394 ff960000.dsi.0: unprepare
[  431.169357] pclk_mipi_dsi0 already disabled

echo 0 > /sys/class/graphics/fb0/blank

[  432.796851] panel-himax-hx8394 ff960000.dsi.0: prepare
[  432.981537] dw-mipi-dsi-rockchip ff960000.dsi: enable
[  432.981568] panel-himax-hx8394 ff960000.dsi.0: enable
[  433.002290] dw-mipi-dsi-rockchip ff960000.dsi: failed to write command FIFO
[  433.002299] panel-himax-hx8394 ff960000.dsi.0: sending command 0xb9 failed: -110
[  433.002312] panel-himax-hx8394 ff960000.dsi.0: Panel init sequence failed: -110

-----------------------------------------------------------------------

After:

[    1.248372] dw-mipi-dsi-rockchip ff960000.dsi: mode_set
[    1.248704] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[    1.285377] panel-himax-hx8394 ff960000.dsi.0: prepare
[    1.468392] dw-mipi-dsi-rockchip ff960000.dsi: enable
[    1.468421] panel-himax-hx8394 ff960000.dsi.0: enable

echo 2 > /sys/class/graphics/fb0/blank

[   16.210357] panel-himax-hx8394 ff960000.dsi.0: disable
[   16.261315] dw-mipi-dsi-rockchip ff960000.dsi: post_disable
[   16.261339] panel-himax-hx8394 ff960000.dsi.0: unprepare

echo 0 > /sys/class/graphics/fb0/blank

[   19.161453] dw-mipi-dsi-rockchip ff960000.dsi: pre_enable
[   19.197869] panel-himax-hx8394 ff960000.dsi.0: prepare
[   19.382141] dw-mipi-dsi-rockchip ff960000.dsi: enable
[   19.382158] panel-himax-hx8394 ff960000.dsi.0: enable

(But depends on functionality intorduced in Linux 6.3, so this patch will
not build on older kernels when applied to older stable branches.)

Fixes 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
---
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 28 +++++++++++--------
 1 file changed, 16 insertions(+), 12 deletions(-)
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c +16 -12
index b2efecf7d1603..4291798bd70f5 100644
@@ -265,6 +265,7 @@ struct dw_mipi_dsi {
 	struct dw_mipi_dsi *master; /* dual-dsi master ptr */
 	struct dw_mipi_dsi *slave; /* dual-dsi slave ptr */
 
+	struct drm_display_mode mode;
 	const struct dw_mipi_dsi_plat_data *plat_data;
 };
 
@@ -332,6 +333,7 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
 	if (IS_ERR(bridge))
 		return PTR_ERR(bridge);
 
+	bridge->pre_enable_prev_first = true;
 	dsi->panel_bridge = bridge;
 
 	drm_bridge_add(&dsi->bridge);
@@ -859,15 +861,6 @@ static void dw_mipi_dsi_bridge_post_atomic_disable(struct drm_bridge *bridge,
 	 */
 	dw_mipi_dsi_set_mode(dsi, 0);
 
-	/*
-	 * TODO Only way found to call panel-bridge post_disable &
-	 * panel unprepare before the dsi "final" disable...
-	 * This needs to be fixed in the drm_bridge framework and the API
-	 * needs to be updated to manage our own call chains...
-	 */
-	if (dsi->panel_bridge->funcs->post_disable)
-		dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge);
-
 	if (phy_ops->power_off)
 		phy_ops->power_off(dsi->plat_data->priv_data);
 
@@ -942,15 +935,25 @@ static void dw_mipi_dsi_mode_set(struct dw_mipi_dsi *dsi,
 		phy_ops->power_on(dsi->plat_data->priv_data);
 }
 
+static void dw_mipi_dsi_bridge_atomic_pre_enable(struct drm_bridge *bridge,
+						 struct drm_bridge_state *old_bridge_state)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	/* Power up the dsi ctl into a command mode */
+	dw_mipi_dsi_mode_set(dsi, &dsi->mode);
+	if (dsi->slave)
+		dw_mipi_dsi_mode_set(dsi->slave, &dsi->mode);
+}
+
 static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
 					const struct drm_display_mode *mode,
 					const struct drm_display_mode *adjusted_mode)
 {
 	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
 
-	dw_mipi_dsi_mode_set(dsi, adjusted_mode);
-	if (dsi->slave)
-		dw_mipi_dsi_mode_set(dsi->slave, adjusted_mode);
+	/* Store the display mode for later use in pre_enable callback */
+	drm_mode_copy(&dsi->mode, adjusted_mode);
 }
 
 static void dw_mipi_dsi_bridge_atomic_enable(struct drm_bridge *bridge,
@@ -1004,6 +1007,7 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
 	.atomic_duplicate_state	= drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state	= drm_atomic_helper_bridge_destroy_state,
 	.atomic_reset		= drm_atomic_helper_bridge_reset,
+	.atomic_pre_enable	= dw_mipi_dsi_bridge_atomic_pre_enable,
 	.atomic_enable		= dw_mipi_dsi_bridge_atomic_enable,
 	.atomic_post_disable	= dw_mipi_dsi_bridge_post_atomic_disable,
 	.mode_set		= dw_mipi_dsi_bridge_mode_set,
Signature · 1 line
2.40.1
author maintainer
#215 lore raw

Re: [PATCH 6.1 213/600] drm: bridge: dw-mipi-dsi: Fix enable/disable of DSI controller

Quoted 8 lines · Ondřej Jirman
Quoted 2 lines · Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

See patch message comment:

(But depends on functionality intorduced in Linux 6.3, so this patch will
not build on older kernels when applied to older stable branches.)

Ah, missed that, thanks, now dropped.

greg k-h

author maintainer
#216 lore raw

PATCH 214/600 quota: factor out dquot_write_dquot()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li <[email protected]>

[ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ]

Refactor out dquot_write_dquot() to reduce duplicate code.

Message-Id: <[email protected]>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")

---
 fs/quota/dquot.c | 39 ++++++++++++++++-----------------------
 1 file changed, 16 insertions(+), 23 deletions(-)
fs/quota/dquot.c +16 -23
index 46dca88d89c36..5541960ad0252 100644
@@ -628,6 +628,18 @@ int dquot_scan_active(struct super_block *sb,
 }
 EXPORT_SYMBOL(dquot_scan_active);
 
+static inline int dquot_write_dquot(struct dquot *dquot)
+{
+	int ret = dquot->dq_sb->dq_op->write_dquot(dquot);
+	if (ret < 0) {
+		quota_error(dquot->dq_sb, "Can't write quota structure "
+			    "(error %d). Quota may get out of sync!", ret);
+		/* Clear dirty bit anyway to avoid infinite loop. */
+		clear_dquot_dirty(dquot);
+	}
+	return ret;
+}
+
 /* Write all dquot structures to quota files */
 int dquot_writeback_dquots(struct super_block *sb, int type)
 {
@@ -658,16 +670,9 @@ int dquot_writeback_dquots(struct super_block *sb, int type)
 			 * use count */
 			dqgrab(dquot);
 			spin_unlock(&dq_list_lock);
-			err = sb->dq_op->write_dquot(dquot);
-			if (err) {
-				/*
-				 * Clear dirty bit anyway to avoid infinite
-				 * loop here.
-				 */
-				clear_dquot_dirty(dquot);
-				if (!ret)
-					ret = err;
-			}
+			err = dquot_write_dquot(dquot);
+			if (err && !ret)
+				ret = err;
 			dqput(dquot);
 			spin_lock(&dq_list_lock);
 		}
@@ -765,8 +770,6 @@ static struct shrinker dqcache_shrinker = {
  */
 void dqput(struct dquot *dquot)
 {
-	int ret;
-
 	if (!dquot)
 		return;
 #ifdef CONFIG_QUOTA_DEBUG
@@ -794,17 +797,7 @@ void dqput(struct dquot *dquot)
 	if (dquot_dirty(dquot)) {
 		spin_unlock(&dq_list_lock);
 		/* Commit dquot before releasing */
-		ret = dquot->dq_sb->dq_op->write_dquot(dquot);
-		if (ret < 0) {
-			quota_error(dquot->dq_sb, "Can't write quota structure"
-				    " (error %d). Quota may get out of sync!",
-				    ret);
-			/*
-			 * We clear dirty bit anyway, so that we avoid
-			 * infinite loop here
-			 */
-			clear_dquot_dirty(dquot);
-		}
+		dquot_write_dquot(dquot);
 		goto we_slept;
 	}
 	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
Signature · 1 line
2.40.1
author maintainer
#217 lore raw

PATCH 215/600 quota: rename dquot_active() to inode_quota_active()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li <[email protected]>

[ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ]

Now we have a helper function dquot_dirty() to determine if dquot has DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by renaming it to inode_quota_active() and later on we will add the helper function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.

Message-Id: <[email protected]>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")

---
 fs/quota/dquot.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
fs/quota/dquot.c +10 -10
index 5541960ad0252..f9f0610b504df 100644
@@ -1418,7 +1418,7 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space)
 	return QUOTA_NL_NOWARN;
 }
 
-static int dquot_active(const struct inode *inode)
+static int inode_quota_active(const struct inode *inode)
 {
 	struct super_block *sb = inode->i_sb;
 
@@ -1441,7 +1441,7 @@ static int __dquot_initialize(struct inode *inode, int type)
 	qsize_t rsv;
 	int ret = 0;
 
-	if (!dquot_active(inode))
+	if (!inode_quota_active(inode))
 		return 0;
 
 	dquots = i_dquot(inode);
@@ -1549,7 +1549,7 @@ bool dquot_initialize_needed(struct inode *inode)
 	struct dquot **dquots;
 	int i;
 
-	if (!dquot_active(inode))
+	if (!inode_quota_active(inode))
 		return false;
 
 	dquots = i_dquot(inode);
@@ -1660,7 +1660,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	int reserve = flags & DQUOT_SPACE_RESERVE;
 	struct dquot **dquots;
 
-	if (!dquot_active(inode)) {
+	if (!inode_quota_active(inode)) {
 		if (reserve) {
 			spin_lock(&inode->i_lock);
 			*inode_reserved_space(inode) += number;
@@ -1730,7 +1730,7 @@ int dquot_alloc_inode(struct inode *inode)
 	struct dquot_warn warn[MAXQUOTAS];
 	struct dquot * const *dquots;
 
-	if (!dquot_active(inode))
+	if (!inode_quota_active(inode))
 		return 0;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
 		warn[cnt].w_type = QUOTA_NL_NOWARN;
@@ -1773,7 +1773,7 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 	struct dquot **dquots;
 	int cnt, index;
 
-	if (!dquot_active(inode)) {
+	if (!inode_quota_active(inode)) {
 		spin_lock(&inode->i_lock);
 		*inode_reserved_space(inode) -= number;
 		__inode_add_bytes(inode, number);
@@ -1815,7 +1815,7 @@ void dquot_reclaim_space_nodirty(struct inode *inode, qsize_t number)
 	struct dquot **dquots;
 	int cnt, index;
 
-	if (!dquot_active(inode)) {
+	if (!inode_quota_active(inode)) {
 		spin_lock(&inode->i_lock);
 		*inode_reserved_space(inode) += number;
 		__inode_sub_bytes(inode, number);
@@ -1859,7 +1859,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 	struct dquot **dquots;
 	int reserve = flags & DQUOT_SPACE_RESERVE, index;
 
-	if (!dquot_active(inode)) {
+	if (!inode_quota_active(inode)) {
 		if (reserve) {
 			spin_lock(&inode->i_lock);
 			*inode_reserved_space(inode) -= number;
@@ -1914,7 +1914,7 @@ void dquot_free_inode(struct inode *inode)
 	struct dquot * const *dquots;
 	int index;
 
-	if (!dquot_active(inode))
+	if (!inode_quota_active(inode))
 		return;
 
 	dquots = i_dquot(inode);
@@ -2086,7 +2086,7 @@ int dquot_transfer(struct user_namespace *mnt_userns, struct inode *inode,
 	struct super_block *sb = inode->i_sb;
 	int ret;
 
-	if (!dquot_active(inode))
+	if (!inode_quota_active(inode))
 		return 0;
 
 	if (i_uid_needs_update(mnt_userns, iattr, inode)) {
Signature · 1 line
2.40.1
author maintainer
#218 lore raw

PATCH 216/600 quota: add new helper dquot_active()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li <[email protected]>

[ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ]

Add new helper function dquot_active() to make the code more concise.

Message-Id: <[email protected]>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")

---
 fs/quota/dquot.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)
fs/quota/dquot.c +14 -9
index f9f0610b504df..e4a19a893d85c 100644
@@ -336,6 +336,11 @@ static void wait_on_dquot(struct dquot *dquot)
 	mutex_unlock(&dquot->dq_lock);
 }
 
+static inline int dquot_active(struct dquot *dquot)
+{
+	return test_bit(DQ_ACTIVE_B, &dquot->dq_flags);
+}
+
 static inline int dquot_dirty(struct dquot *dquot)
 {
 	return test_bit(DQ_MOD_B, &dquot->dq_flags);
@@ -351,14 +356,14 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
 {
 	int ret = 1;
 
-	if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
+	if (!dquot_active(dquot))
 		return 0;
 
 	if (sb_dqopt(dquot->dq_sb)->flags & DQUOT_NOLIST_DIRTY)
 		return test_and_set_bit(DQ_MOD_B, &dquot->dq_flags);
 
 	/* If quota is dirty already, we don't have to acquire dq_list_lock */
-	if (test_bit(DQ_MOD_B, &dquot->dq_flags))
+	if (dquot_dirty(dquot))
 		return 1;
 
 	spin_lock(&dq_list_lock);
@@ -440,7 +445,7 @@ int dquot_acquire(struct dquot *dquot)
 	smp_mb__before_atomic();
 	set_bit(DQ_READ_B, &dquot->dq_flags);
 	/* Instantiate dquot if needed */
-	if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && !dquot->dq_off) {
+	if (!dquot_active(dquot) && !dquot->dq_off) {
 		ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk(dquot);
 		/* Write the info if needed */
 		if (info_dirty(&dqopt->info[dquot->dq_id.type])) {
@@ -482,7 +487,7 @@ int dquot_commit(struct dquot *dquot)
 		goto out_lock;
 	/* Inactive dquot can be only if there was error during read/init
 	 * => we have better not writing it */
-	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
+	if (dquot_active(dquot))
 		ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk(dquot);
 	else
 		ret = -EIO;
@@ -597,7 +602,7 @@ int dquot_scan_active(struct super_block *sb,
 
 	spin_lock(&dq_list_lock);
 	list_for_each_entry(dquot, &inuse_list, dq_inuse) {
-		if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
+		if (!dquot_active(dquot))
 			continue;
 		if (dquot->dq_sb != sb)
 			continue;
@@ -612,7 +617,7 @@ int dquot_scan_active(struct super_block *sb,
 		 * outstanding call and recheck the DQ_ACTIVE_B after that.
 		 */
 		wait_on_dquot(dquot);
-		if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+		if (dquot_active(dquot)) {
 			ret = fn(dquot, priv);
 			if (ret < 0)
 				goto out;
@@ -663,7 +668,7 @@ int dquot_writeback_dquots(struct super_block *sb, int type)
 			dquot = list_first_entry(&dirty, struct dquot,
 						 dq_dirty);
 
-			WARN_ON(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags));
+			WARN_ON(!dquot_active(dquot));
 
 			/* Now we have active dquot from which someone is
  			 * holding reference so we can safely just increase
@@ -800,7 +805,7 @@ void dqput(struct dquot *dquot)
 		dquot_write_dquot(dquot);
 		goto we_slept;
 	}
-	if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+	if (dquot_active(dquot)) {
 		spin_unlock(&dq_list_lock);
 		dquot->dq_sb->dq_op->release_dquot(dquot);
 		goto we_slept;
@@ -901,7 +906,7 @@ struct dquot *dqget(struct super_block *sb, struct kqid qid)
 	 * already finished or it will be canceled due to dq_count > 1 test */
 	wait_on_dquot(dquot);
 	/* Read the dquot / allocate space in quota file */
-	if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+	if (!dquot_active(dquot)) {
 		int err;
 
 		err = sb->dq_op->acquire_dquot(dquot);
Signature · 1 line
2.40.1
author maintainer
#219 lore raw

PATCH 217/600 quota: fix dqput() to follow the guarantees dquot_srcu should provide

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li <[email protected]>

[ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ]

The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below:

cpu1 cpu2
_________________|_________________
wb_do_writeback CHOWN(1)
...
ext4_da_update_reserve_space
dquot_claim_block

    ...
     dquot_mark_dquot_dirty // try to dirty old quota
      test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
      if (test_bit(DQ_MOD_B, &dquot->dq_flags))
      // test no dirty, wait dq_list_lock
                    ...
                     dquot_transfer
                      __dquot_transfer
                      dqput_all(transfer_from) // rls old dquot
                       dqput // last dqput
                        dquot_release
                         clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
                        atomic_dec(&dquot->dq_count)
                        put_dquot_last(dquot)
                         list_add_tail(&dquot->dq_free, &free_dquots)
                         // add the dquot to free_dquots
      if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
        add dqi_dirty_list // add released dquot to dirty_list

This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice.

As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots.

Fixes 4580b30ea887 ("quota: Do not dirty bad dquots")

Message-Id: <[email protected]>

---
 fs/quota/dquot.c | 96 +++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 78 insertions(+), 18 deletions(-)
fs/quota/dquot.c +78 -18
index e4a19a893d85c..53b65c5300fde 100644
@@ -225,13 +225,22 @@ static void put_quota_format(struct quota_format_type *fmt)
 
 /*
  * Dquot List Management:
- * The quota code uses four lists for dquot management: the inuse_list,
- * free_dquots, dqi_dirty_list, and dquot_hash[] array. A single dquot
- * structure may be on some of those lists, depending on its current state.
+ * The quota code uses five lists for dquot management: the inuse_list,
+ * releasing_dquots, free_dquots, dqi_dirty_list, and dquot_hash[] array.
+ * A single dquot structure may be on some of those lists, depending on
+ * its current state.
  *
  * All dquots are placed to the end of inuse_list when first created, and this
  * list is used for invalidate operation, which must look at every dquot.
  *
+ * When the last reference of a dquot will be dropped, the dquot will be
+ * added to releasing_dquots. We'd then queue work item which would call
+ * synchronize_srcu() and after that perform the final cleanup of all the
+ * dquots on the list. Both releasing_dquots and free_dquots use the
+ * dq_free list_head in the dquot struct. When a dquot is removed from
+ * releasing_dquots, a reference count is always subtracted, and if
+ * dq_count == 0 at that point, the dquot will be added to the free_dquots.
+ *
  * Unused dquots (dq_count == 0) are added to the free_dquots list when freed,
  * and this list is searched whenever we need an available dquot.  Dquots are
  * removed from the list as soon as they are used again, and
@@ -250,6 +259,7 @@ static void put_quota_format(struct quota_format_type *fmt)
 
 static LIST_HEAD(inuse_list);
 static LIST_HEAD(free_dquots);
+static LIST_HEAD(releasing_dquots);
 static unsigned int dq_hash_bits, dq_hash_mask;
 static struct hlist_head *dquot_hash;
 
@@ -260,6 +270,9 @@ static qsize_t inode_get_rsv_space(struct inode *inode);
 static qsize_t __inode_get_rsv_space(struct inode *inode);
 static int __dquot_initialize(struct inode *inode, int type);
 
+static void quota_release_workfn(struct work_struct *work);
+static DECLARE_DELAYED_WORK(quota_release_work, quota_release_workfn);
+
 static inline unsigned int
 hashfn(const struct super_block *sb, struct kqid qid)
 {
@@ -305,12 +318,18 @@ static inline void put_dquot_last(struct dquot *dquot)
 	dqstats_inc(DQST_FREE_DQUOTS);
 }
 
+static inline void put_releasing_dquots(struct dquot *dquot)
+{
+	list_add_tail(&dquot->dq_free, &releasing_dquots);
+}
+
 static inline void remove_free_dquot(struct dquot *dquot)
 {
 	if (list_empty(&dquot->dq_free))
 		return;
 	list_del_init(&dquot->dq_free);
-	dqstats_dec(DQST_FREE_DQUOTS);
+	if (!atomic_read(&dquot->dq_count))
+		dqstats_dec(DQST_FREE_DQUOTS);
 }
 
 static inline void put_inuse(struct dquot *dquot)
@@ -552,6 +571,8 @@ static void invalidate_dquots(struct super_block *sb, int type)
 	struct dquot *dquot, *tmp;
 
 restart:
+	flush_delayed_work(&quota_release_work);
+
 	spin_lock(&dq_list_lock);
 	list_for_each_entry_safe(dquot, tmp, &inuse_list, dq_inuse) {
 		if (dquot->dq_sb != sb)
@@ -560,6 +581,12 @@ static void invalidate_dquots(struct super_block *sb, int type)
 			continue;
 		/* Wait for dquot users */
 		if (atomic_read(&dquot->dq_count)) {
+			/* dquot in releasing_dquots, flush and retry */
+			if (!list_empty(&dquot->dq_free)) {
+				spin_unlock(&dq_list_lock);
+				goto restart;
+			}
+
 			atomic_inc(&dquot->dq_count);
 			spin_unlock(&dq_list_lock);
 			/*
@@ -770,6 +797,49 @@ static struct shrinker dqcache_shrinker = {
 	.seeks = DEFAULT_SEEKS,
 };
 
+/*
+ * Safely release dquot and put reference to dquot.
+ */
+static void quota_release_workfn(struct work_struct *work)
+{
+	struct dquot *dquot;
+	struct list_head rls_head;
+
+	spin_lock(&dq_list_lock);
+	/* Exchange the list head to avoid livelock. */
+	list_replace_init(&releasing_dquots, &rls_head);
+	spin_unlock(&dq_list_lock);
+
+restart:
+	synchronize_srcu(&dquot_srcu);
+	spin_lock(&dq_list_lock);
+	while (!list_empty(&rls_head)) {
+		dquot = list_first_entry(&rls_head, struct dquot, dq_free);
+		/* Dquot got used again? */
+		if (atomic_read(&dquot->dq_count) > 1) {
+			remove_free_dquot(dquot);
+			atomic_dec(&dquot->dq_count);
+			continue;
+		}
+		if (dquot_dirty(dquot)) {
+			spin_unlock(&dq_list_lock);
+			/* Commit dquot before releasing */
+			dquot_write_dquot(dquot);
+			goto restart;
+		}
+		if (dquot_active(dquot)) {
+			spin_unlock(&dq_list_lock);
+			dquot->dq_sb->dq_op->release_dquot(dquot);
+			goto restart;
+		}
+		/* Dquot is inactive and clean, now move it to free list */
+		remove_free_dquot(dquot);
+		atomic_dec(&dquot->dq_count);
+		put_dquot_last(dquot);
+	}
+	spin_unlock(&dq_list_lock);
+}
+
 /*
  * Put reference to dquot
  */
@@ -786,7 +856,7 @@ void dqput(struct dquot *dquot)
 	}
 #endif
 	dqstats_inc(DQST_DROPS);
-we_slept:
+
 	spin_lock(&dq_list_lock);
 	if (atomic_read(&dquot->dq_count) > 1) {
 		/* We have more than one user... nothing to do */
@@ -798,25 +868,15 @@ void dqput(struct dquot *dquot)
 		spin_unlock(&dq_list_lock);
 		return;
 	}
+
 	/* Need to release dquot? */
-	if (dquot_dirty(dquot)) {
-		spin_unlock(&dq_list_lock);
-		/* Commit dquot before releasing */
-		dquot_write_dquot(dquot);
-		goto we_slept;
-	}
-	if (dquot_active(dquot)) {
-		spin_unlock(&dq_list_lock);
-		dquot->dq_sb->dq_op->release_dquot(dquot);
-		goto we_slept;
-	}
-	atomic_dec(&dquot->dq_count);
 #ifdef CONFIG_QUOTA_DEBUG
 	/* sanity check */
 	BUG_ON(!list_empty(&dquot->dq_free));
 #endif
-	put_dquot_last(dquot);
+	put_releasing_dquots(dquot);
 	spin_unlock(&dq_list_lock);
+	queue_delayed_work(system_unbound_wq, &quota_release_work, 1);
 }
 EXPORT_SYMBOL(dqput);
 
Signature · 1 line
2.40.1
author maintainer
#220 lore raw

PATCH 218/600 drm/amd/display: Do not set drr on pipe commit

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wesley Chalmers <[email protected]>

[ Upstream commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7 ]

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow.

[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required.

This change expects that Freesync requests are blocked when optimized_required is true.

---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 6 ++++++
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 7 +++++++
 2 files changed, 13 insertions(+)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +6 -0
index 4ef632864948e..21fae818ca28f 100644
@@ -2032,6 +2032,12 @@ void dcn20_optimize_bandwidth(
 	if (hubbub->funcs->program_compbuf_size)
 		hubbub->funcs->program_compbuf_size(hubbub, context->bw_ctx.bw.dcn.compbuf_size_kb, true);
 
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+		dc_dmub_srv_p_state_delegate(dc,
+			true, context);
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = true;
+	}
+
 	dc->clk_mgr->funcs->update_clocks(
 			dc->clk_mgr,
 			context,
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c +7 -0
index a1b312483d7f1..c97d3e81a83d2 100644
@@ -987,11 +987,18 @@ void dcn30_set_disp_pattern_generator(const struct dc *dc,
 void dcn30_prepare_bandwidth(struct dc *dc,
  	struct dc_state *context)
 {
+	if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) {
+		dc->optimized_required = true;
+		context->bw_ctx.bw.dcn.clk.p_state_change_support = false;
+	}
+
 	if (dc->clk_mgr->dc_mode_softmax_enabled)
 		if (dc->clk_mgr->clks.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000 &&
 				context->bw_ctx.bw.dcn.clk.dramclk_khz > dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000)
 			dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz);
 
 	dcn20_prepare_bandwidth(dc, context);
+
+	dc_dmub_srv_p_state_delegate(dc, false, context);
 }
 
Signature · 1 line
2.40.1
author maintainer
#221 lore raw

PATCH 219/600 drm/hyperv: Fix a compilation issue because of not including screen_info.h

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sui Jingfeng <[email protected]>

[ Upstream commit 8d1077cf2e43b15fefd76ebec2b71541eb27ef2c ]

Fixes the following build errors on arm64:

drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem':

Quoted 1 line
Quoted 1 line

drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function)

    1033 |                 base = screen_info.lfb_base;
         |                        ^~~~~~~~~~~

drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in

Quoted 1 line
Quoted 1 line

drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function)

75 | drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base,
| ^~~~~~~~~~~
drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in

Fixes 81d2393485f0 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures")
Fixes 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header")
---
 drivers/gpu/drm/hyperv/hyperv_drm_drv.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/hyperv/hyperv_drm_drv.c +1 -0
index 29ee0814bccc8..68050409dd26c 100644
@@ -7,6 +7,7 @@
 #include <linux/hyperv.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/screen_info.h>
 
 #include <drm/drm_aperture.h>
 #include <drm/drm_atomic_helper.h>
Signature · 1 line
2.40.1
author maintainer
#222 lore raw

PATCH 220/600 ASoC: stac9766: fix build errors with REGMAP_AC97

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <[email protected]>

[ Upstream commit c70064b96f509daa78f57992aeabcf274fb2fed4 ]

Select REGMAP_AC97 to fix these build errors:

ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!

Fixes 6bbf787bb70c ("ASoC: stac9766: Convert to regmap")
Cc Lars-Peter Clausen <[email protected]>
Cc Mark Brown <[email protected]>
Cc Liam Girdwood <[email protected]>
---
 sound/soc/codecs/Kconfig | 1 +
 1 file changed, 1 insertion(+)
sound/soc/codecs/Kconfig +1 -0
index 965ae55fa1607..0904827e2f3db 100644
@@ -1552,6 +1552,7 @@ config SND_SOC_STA529
 config SND_SOC_STAC9766
 	tristate
 	depends on SND_SOC_AC97_BUS
+	select REGMAP_AC97
 
 config SND_SOC_STI_SAS
 	tristate "codec Audio support for STI SAS codec"
Signature · 1 line
2.40.1
author maintainer
#223 lore raw

PATCH 221/600 soc: qcom: ocmem: Add OCMEM hardware version print

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luca Weiss <[email protected]>

[ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ]

It might be useful to know what hardware version of the OCMEM block the SoC contains. Add a debug print for that.

Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros")

---
 drivers/soc/qcom/ocmem.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/soc/qcom/ocmem.c +10 -0
index c92d26b73e6fc..7197d9fe0946a 100644
@@ -76,6 +76,10 @@ struct ocmem {
 #define OCMEM_REG_GFX_MPU_START			0x00001004
 #define OCMEM_REG_GFX_MPU_END			0x00001008
 
+#define OCMEM_HW_VERSION_MAJOR(val)		FIELD_GET(GENMASK(31, 28), val)
+#define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
+#define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
+
 #define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_PREP(0x0000000f, (val))
 #define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_PREP(0x00003f00, (val))
 
@@ -355,6 +359,12 @@ static int ocmem_dev_probe(struct platform_device *pdev)
 		}
 	}
 
+	reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION);
+	dev_dbg(dev, "OCMEM hardware version: %lu.%lu.%lu\n",
+		OCMEM_HW_VERSION_MAJOR(reg),
+		OCMEM_HW_VERSION_MINOR(reg),
+		OCMEM_HW_VERSION_STEP(reg));
+
 	reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE);
 	ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg);
 	ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg);
Signature · 1 line
2.40.1
author maintainer
#224 lore raw

PATCH 222/600 soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luca Weiss <[email protected]>

[ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ]

Since we're using these two macros to read a value from a register, we need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise we're getting wrong values.

So instead of:

  [    3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved

we now get the correct value of:

  [    3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved
---
 drivers/soc/qcom/ocmem.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/soc/qcom/ocmem.c +2 -2
index 7197d9fe0946a..27c668eac9647 100644
@@ -80,8 +80,8 @@ struct ocmem {
 #define OCMEM_HW_VERSION_MINOR(val)		FIELD_GET(GENMASK(27, 16), val)
 #define OCMEM_HW_VERSION_STEP(val)		FIELD_GET(GENMASK(15, 0), val)
 
-#define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_PREP(0x0000000f, (val))
-#define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_PREP(0x00003f00, (val))
+#define OCMEM_HW_PROFILE_NUM_PORTS(val)		FIELD_GET(0x0000000f, (val))
+#define OCMEM_HW_PROFILE_NUM_MACROS(val)	FIELD_GET(0x00003f00, (val))
 
 #define OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE	0x00010000
 #define OCMEM_HW_PROFILE_INTERLEAVING		0x00020000
Signature · 1 line
2.40.1
author maintainer
#225 lore raw

PATCH 223/600 arm64: dts: qcom: sm6350: Fix ZAP region

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 44bcded2be4fe9b9d0b6e48075c9947b75c0af63 ]

The previous ZAP region definition was wrong. Fix it. Note this is not a device-specific fixup, but a fixup to the generic PIL load address.

---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/qcom/sm6350.dtsi +5 -5
index 35f621ef9da54..34c8de4f43fba 100644
@@ -306,11 +306,6 @@ pil_ipa_gsi_mem: memory@8b710000 {
 			no-map;
 		};
 
-		pil_gpu_mem: memory@8b715400 {
-			reg = <0 0x8b715400 0 0x2000>;
-			no-map;
-		};
-
 		pil_modem_mem: memory@8b800000 {
 			reg = <0 0x8b800000 0 0xf800000>;
 			no-map;
@@ -331,6 +326,11 @@ removed_region: memory@c0000000 {
 			no-map;
 		};
 
+		pil_gpu_mem: memory@f0d00000 {
+			reg = <0 0xf0d00000 0 0x1000>;
+			no-map;
+		};
+
 		debug_region: memory@ffb00000 {
 			reg = <0 0xffb00000 0 0xc0000>;
 			no-map;
Signature · 1 line
2.40.1
author maintainer
#226 lore raw

PATCH 224/600 arm64: dts: qcom: sm8250: correct dynamic power coefficients

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vincent Guittot <[email protected]>

[ Upstream commit 775a5283c25d160b2a1359018c447bc518096547 ]

sm8250 faces the same problem with its Energy Model as sdm845. The energy cost of LITTLE cores is reported to be higher than medium or big cores

EM computes the energy with formula:

energy = OPP's cost / maximum cpu capacity * utilization

On v6.4-rc6 we have:
max capacity of CPU0 = 284
capacity of CPU0's OPP(1612800 Hz) = 253
cost of CPU0's OPP(1612800 Hz) = 191704

max capacity of CPU4 = 871
capacity of CPU4's OPP(710400 Hz) = 255
cost of CPU4's OPP(710400 Hz) = 343217

Both OPPs have almost the same compute capacity but the estimated energy per unit of utilization will be estimated to:

energy CPU0 = 191704 / 284 * 1 = 675
energy CPU4 = 343217 / 871 * 1 = 394

EM estimates that little CPU0 will consume 71% more than medium CPU4 for the same compute capacity. According to [1], little consumes 25% less than medium core for Coremark benchmark at those OPPs for the same duration.

Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model for little CPUs.

[1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s

Fixes 6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model")
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/qcom/sm8250.dtsi +4 -4
index e93955525a107..c27f88c9f7b2a 100644
@@ -99,7 +99,7 @@ CPU0: cpu@0 {
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_0>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
@@ -123,7 +123,7 @@ CPU1: cpu@100 {
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_100>;
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
@@ -144,7 +144,7 @@ CPU2: cpu@200 {
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_200>;
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
@@ -165,7 +165,7 @@ CPU3: cpu@300 {
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <448>;
-			dynamic-power-coefficient = <205>;
+			dynamic-power-coefficient = <105>;
 			next-level-cache = <&L2_300>;
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
Signature · 1 line
2.40.1
author maintainer
#227 lore raw

PATCH 225/600 arm64: dts: qcom: msm8916-l8150: correct light sensor VDDIO supply

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 6a541eaa6e8e5283efb993ae7a947bede8d01fa5 ]

liteon,ltr559 light sensor takes VDDIO, not VIO, supply:

msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes 3016af34ef8d ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor")
---
 arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +1 -1
index d85e7f7c0835a..75f7b4f35fe82 100644
@@ -163,7 +163,7 @@ light-sensor@23 {
 		pinctrl-0 = <&light_int_default>;
 
 		vdd-supply = <&pm8916_l17>;
-		vio-supply = <&pm8916_l6>;
+		vddio-supply = <&pm8916_l6>;
 	};
 
 	gyroscope@68 {
Signature · 1 line
2.40.1
author maintainer
#228 lore raw

PATCH 226/600 arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 40b398beabdfe0e9088b13976e56b1dc706fe851 ]

Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:

<                         "CAM_PWR_A_CS",
>                         "FRONTC_PWR_EN",
<                         "CAM4_MCLK",
<                         "TOF_RST_N",
>                         "NC",
>                         "NC",
<                         "WLC_I2C_SDA",
<                         "WLC_I2C_SCL", /* GPIO_120 */
>                         "NC",
>                         "NC",
<                         "WLC_INT_N",
>                         "NC",

Which makes sense, as 203 has a 3D iToF, slightly different camera power wiring and WLC (WireLess Charging).

Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")

---
 .../qcom/sm8250-sony-xperia-edo-pdx203.dts    | 183 ++++++++++++++++++
 .../qcom/sm8250-sony-xperia-edo-pdx206.dts    | 183 ++++++++++++++++++
 2 files changed, 366 insertions(+)
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +183 -0
index 356a81698731a..84104d2b20101 100644
@@ -14,3 +14,186 @@ / {
 };
 
 /delete-node/ &vreg_l7f_1p8;
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "CAM_PWR_A_CS",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "CAM4_MCLK",
+			  "TOF_RST_N",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +183 -0

189 lines not on this page · raw message

Signature · 1 line
2.40.1
author maintainer
#229 lore raw

PATCH 227/600 arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 6b8a63350752c6a5e4b54f2de6174084652cd3cd ]

Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
pm8009_gpios
< "CAM_PWR_LD_EN",

Quoted 1 line
                        "NC",

pm8150_gpios

<                         "NC",
>                         "G_ASSIST_N",
<                         "WLC_EN_N", /* GPIO_10 */
>                         "NC", /* GPIO_10 */

Which is due to 5 II having an additional Google Assistant hardware button and 1 II having a wireless charger & different camera wiring to accommodate the additional 3D iToF sensor.

Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")

---
 .../qcom/sm8250-sony-xperia-edo-pdx203.dts    | 50 +++++++++++++++++++
 .../qcom/sm8250-sony-xperia-edo-pdx206.dts    | 50 +++++++++++++++++++
 2 files changed, 100 insertions(+)
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +50 -0
index 84104d2b20101..62590c6bd3067 100644
@@ -15,6 +15,56 @@ / {
 
 /delete-node/ &vreg_l7f_1p8;
 
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "CAM_PWR_LD_EN",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "NC",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "WLC_EN_N", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "AUX3_THERM", /* GPIO_10 */
+			  "DTV_PWR_EN",
+			  "PM3003A_MODE";
+};
+
 &tlmm {
 	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
 			  "MDM2AP_ERR_FATAL",
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +50 -0

56 lines not on this page · raw message

Signature · 1 line
2.40.1
author maintainer
#230 lore raw

PATCH 228/600 arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit a422c6a91a667b309ca1a6c08b30dbfcf7d4e866 ]

Set up the corresponding GPIOs properly and add the leftover hardware buttons to mark this piece of the puzzle complete.

Fixes 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
---
 .../qcom/sm8250-sony-xperia-edo-pdx206.dts    | 10 ++++
 .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 54 ++++++++++++++++---
 2 files changed, 58 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +10 -0
index 65bad39ecda83..0e50661c1b4c1 100644
@@ -20,6 +20,8 @@ &framebuffer {
 };
 
 &gpio_keys {
+	pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
 	g-assist-key {
 		label = "Google Assistant Key";
 		linux,code = <KEY_LEFTMETA>;
@@ -48,6 +50,14 @@ &pm8150_gpios {
 			  "SP_ARI_PWR_ALARM",
 			  "NC",
 			  "NC"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
 };
 
 &pm8150b_gpios {
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +48 -6

66 lines not on this page · raw message

Signature · 1 line
2.40.1
author maintainer
#231 lore raw

PATCH 229/600 arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjorn Andersson <[email protected]>

[ Upstream commit 9566b5271f68bdf6e69b7c511850e3fb75cd18be ]

The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on the CRD.

---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +2 -2
index 5e30349efd204..38ec8acb7c40d 100644
@@ -57,7 +57,7 @@ vreg_misc_3p3: regulator-misc-3p3 {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
@@ -364,7 +364,7 @@ edp_bl_reg_en: edp-bl-reg-en-state {
 	};
 
 	misc_3p3_reg_en: misc-3p3-reg-en-state {
-		pins = "gpio1";
+		pins = "gpio2";
 		function = "normal";
 	};
 };
Signature · 1 line
2.40.1
author maintainer
#232 lore raw

PATCH 230/600 arm64: dts: qcom: sc8280xp: Add missing SCM interconnect

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 0a69ccf20b0837db857abfc94d7e3bacf1cb771b ]

The SCM interconnect path was missing. Add it.

---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sc8280xp.dtsi +1 -0
index 1afc960bab5c9..405835ad28bcd 100644
@@ -396,6 +396,7 @@ CLUSTER_SLEEP_0: cluster-sleep-0 {
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sc8280xp", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
 
Signature · 1 line
2.40.1
author maintainer
#233 lore raw

PATCH 231/600 arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 36541089c4733355ed844c67eebd0c3936953454 ]

The interrupt line was previously not described. Take care of that.

Fixes 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/qcom/msm8996.dtsi +3 -0
index 9d6ec59d1cd3a..7e381d8257ba1 100644
@@ -3292,6 +3292,9 @@ usb2: usb@76f8800 {
 			#size-cells = <1>;
 			ranges;
 
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
 			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
 				<&gcc GCC_USB20_MASTER_CLK>,
 				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
Signature · 1 line
2.40.1
author maintainer
#234 lore raw

PATCH 232/600 arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 9acc60c3e2d449243e4c2126e3b56f1c4f7fd3bc ]

UART6 is used for debug (routed via uSD pins) and UART9 is connected to the bluetooth chip.

Set indexed aliases to make the GENI UART driver happy and route serial traffic through the debug uart by default.

Fixes 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
---
 arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +9 -0
index 51ee42e3c995c..d6918e6d19799 100644
@@ -14,6 +14,15 @@ / {
 	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
 	qcom,board-id = <8 0>;
 
+	aliases {
+		serial0 = &uart6;
+		serial1 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
Signature · 1 line
2.40.1
author maintainer
#235 lore raw

PATCH 233/600 arm64: dts: qcom: sm8350: Fix CPU idle state residency times

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 91ce3693e2fb685f31d39605a5ad1fbd940804da ]

The present values look to have been copypasted from 8150 or 8180. Fix that.

Fixes 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/qcom/sm8350.dtsi +4 -4
index 7fd1c3f71c0f8..b91247856f9dc 100644
@@ -236,8 +236,8 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <355>;
-				exit-latency-us = <909>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
 				min-residency-us = <3934>;
 				local-timer-stop;
 			};
@@ -246,8 +246,8 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
-				exit-latency-us = <1461>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
 				min-residency-us = <4488>;
 				local-timer-stop;
 			};
Signature · 1 line
2.40.1
author maintainer
#236 lore raw

PATCH 234/600 arm64: dts: qcom: sm8350: Add missing LMH interrupts to cpufreq

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 951151c2bb548e0f6b2c40ab4c48675f5342c914 ]

Add the missing interrupts that communicate the hardware-managed throttling to Linux.

Fixes ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node")
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/qcom/sm8350.dtsi +7 -0
index b91247856f9dc..0b5a1841d607d 100644
@@ -2072,6 +2072,13 @@ cpufreq_hw: cpufreq@18591000 {
 			      <0 0x18593000 0 0x1000>;
 			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
 
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
 
Signature · 1 line
2.40.1
author maintainer
#237 lore raw

PATCH 235/600 arm64: dts: qcom: sm8350: Use proper CPU compatibles

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 4390730cc12af25f7c997f477795f5f4200149c0 ]

The Kryo names (once again) turned out to be fake. The CPUs report:

0x412fd050 (CA55 r2p0) (0 - 3)
0x411fd410 (CA78 r1p1) (4 - 6)
0x411fd440 (CX1 r1p1) (7)

Use the compatibles that reflect that.

Fixes b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/qcom/sm8350.dtsi +8 -8
index 0b5a1841d607d..b3245b13b2611 100644
@@ -63,7 +63,7 @@ cpus {
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
@@ -82,7 +82,7 @@ L3_0: l3-cache {
 
 		CPU1: cpu@100 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
@@ -98,7 +98,7 @@ L2_100: l2-cache {
 
 		CPU2: cpu@200 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
@@ -114,7 +114,7 @@ L2_200: l2-cache {
 
 		CPU3: cpu@300 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
@@ -130,7 +130,7 @@ L2_300: l2-cache {
 
 		CPU4: cpu@400 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a78";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
@@ -146,7 +146,7 @@ L2_400: l2-cache {
 
 		CPU5: cpu@500 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a78";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
@@ -163,7 +163,7 @@ L2_500: l2-cache {
 
 		CPU6: cpu@600 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-a78";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
@@ -179,7 +179,7 @@ L2_600: l2-cache {
 
 		CPU7: cpu@700 {
 			device_type = "cpu";
-			compatible = "qcom,kryo685";
+			compatible = "arm,cortex-x1";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
Signature · 1 line
2.40.1
author maintainer
#238 lore raw

PATCH 236/600 arm64: dts: qcom: pm8350: fix thermal zone name

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 64f19c06f704846db5e4885ca63c689d9bef5723 ]

The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts with the thermal zone in pm8350c.dtsi. Rename the thermal zone according to the chip name.

Fixes 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
---
 arch/arm64/boot/dts/qcom/pm8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/pm8350.dtsi +1 -1
index 2dfeb99300d74..9ed9ba23e81e4 100644
@@ -8,7 +8,7 @@
 
 / {
 	thermal-zones {
-		pm8350_thermal: pm8350c-thermal {
+		pm8350_thermal: pm8350-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8350_temp_alarm>;
Signature · 1 line
2.40.1
author maintainer
#239 lore raw

PATCH 237/600 arm64: dts: qcom: pm8350b: fix thermal zone name

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit aad41d9e6c44dfe299cddab97528a5333f17bdfe ]

The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts with the thermal zone in pm8350c.dtsi. Rename the thermal zone according to the chip name.

Fixes 5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
---
 arch/arm64/boot/dts/qcom/pm8350b.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/pm8350b.dtsi +1 -1
index f1c7bd9d079c2..05c1058988927 100644
@@ -8,7 +8,7 @@
 
 / {
 	thermal-zones {
-		pm8350b_thermal: pm8350c-thermal {
+		pm8350b_thermal: pm8350b-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8350b_temp_alarm>;
Signature · 1 line
2.40.1
author maintainer
#240 lore raw

PATCH 238/600 arm64: dts: qcom: pmr735b: fix thermal zone name

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 99f8cf491d546cd668236f573c7d846d3e94f2d6 ]

The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts with the thermal zone in pmr735a.dtsi. Rename the thermal zone according to the chip name.

Fixes 6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
---
 arch/arm64/boot/dts/qcom/pmr735b.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/pmr735b.dtsi +1 -1
index ec24c4478005a..f7473e2473224 100644
@@ -8,7 +8,7 @@
 
 / {
 	thermal-zones {
-		pmr735a_thermal: pmr735a-thermal {
+		pmr735b_thermal: pmr735b-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pmr735b_temp_alarm>;
Signature · 1 line
2.40.1
author maintainer
#241 lore raw

PATCH 239/600 arm64: dts: qcom: pmk8350: fix ADC-TM compatible string

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 435a73d7377ceb29c1a22d2711dd85c831b40c45 ]

The commit b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350") for the ADC TM (thermal monitoring device) have used the compatible string from the vendor kernel ("qcom,adc-tm7"). Use the proper compatible string that is defined in the upstream kernel ("qcom,spmi-adc-tm5-gen2").

Fixes b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/pmk8350.dtsi +1 -1
index f0d256d99e62e..29cfb6fca9bf7 100644
@@ -44,7 +44,7 @@ pmk8350_vadc: adc@3100 {
 		};
 
 		pmk8350_adc_tm: adc-tm@3400 {
-			compatible = "qcom,adc-tm7";
+			compatible = "qcom,spmi-adc-tm5-gen2";
 			reg = <0x3400>;
 			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
Signature · 1 line
2.40.1
author maintainer
#242 lore raw

PATCH 240/600 arm64: dts: qcom: sm8250: Mark PCIe hosts as DMA coherent

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 339d38a436f30d0f874815eafc7de2257346bf26 ]

The PCIe hosts on SM8250 are cache-coherent. Mark them as such.

Fixes e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/boot/dts/qcom/sm8250.dtsi +3 -0
index c27f88c9f7b2a..4d9b30f0b2841 100644
@@ -1862,6 +1862,7 @@ pcie0: pci@1c00000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -1968,6 +1969,7 @@ pcie1: pci@1c08000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
+			dma-coherent;
 
 			status = "disabled";
 		};
@@ -2076,6 +2078,7 @@ pcie2: pci@1c10000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie2_default_state>;
+			dma-coherent;
 
 			status = "disabled";
 		};
Signature · 1 line
2.40.1
author maintainer
#243 lore raw

PATCH 241/600 ARM: dts: stm32: Rename mdio0 to mdio

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut <[email protected]>

[ Upstream commit a306d8962a24f4e8385853793fd58f9792c7aa61 ]

Replace "mdio0" node with "mdio" to match mdio.yaml DT schema.

Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")

---
 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi     | 2 +-
 arch/arm/boot/dts/stm32mp157c-ev1.dts                | 2 +-
 arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts            | 2 +-
 arch/arm/boot/dts/stm32mp157c-odyssey.dts            | 2 +-
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi         | 2 +-
 arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi   | 2 +-
 arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi | 2 +-
 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi               | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +1 -1
index d540550f7da26..7d11c50b9e408 100644
@@ -173,7 +173,7 @@ &ethernet0 {
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
arch/arm/boot/dts/stm32mp157c-ev1.dts +1 -1
index 050c3c27a4203..b72d5e8aa4669 100644
@@ -144,7 +144,7 @@ &ethernet0 {
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +1 -1
index e8d2ec41d5374..cb00ce7cec8b1 100644
@@ -112,7 +112,7 @@ &ethernet0 {
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
arch/arm/boot/dts/stm32mp157c-odyssey.dts +1 -1
index ed66d25b8bf3d..a8b3f7a547036 100644
@@ -41,7 +41,7 @@ &ethernet0 {
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +1 -1
index d3b85a8764d74..c06edd2eacb0c 100644
@@ -125,7 +125,7 @@ &ethernet0 {
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +1 -1
index f068e4fcc404f..dae602b7a54df 100644
@@ -151,7 +151,7 @@ &ethernet0 {
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi +1 -1
index bb4ac6c13cbd3..39af79dc654cc 100644
@@ -78,7 +78,7 @@ &ethernet0 {
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +1 -1
index fdc48536e97d1..73a6a7b278b90 100644
@@ -141,7 +141,7 @@ &ethernet0 {
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
Signature · 1 line
2.40.1
author maintainer
#244 lore raw

PATCH 242/600 ARM: dts: stm32: YAML validation fails for Argon Boards

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pierre-Yves MORDRET <[email protected]>

[ Upstream commit fc8d2b21bc5d5d7a6eadaa8c2a5d2e6856689480 ]

"make dtbs_check" gives following output :
stm32mp157c-emstamp-argon.dtb: gpu@59000000: 'contiguous-area' does not match any of the regexes: 'pinctrl-[0-9]+'

Quoted 1 line

From schema: Documentation/devicetree/bindings/gpu/vivante,gc.yaml

Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")

---
 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi | 9 ---------
 1 file changed, 9 deletions(-)
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +0 -9
index 7d11c50b9e408..b01470a9a3d53 100644
@@ -68,11 +68,6 @@ retram: retram@38000000 {
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@dc000000 {
-			reg = <0xdc000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led: gpio_leds {
@@ -183,10 +178,6 @@ phy0: ethernet-phy@0 {
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
Signature · 1 line
2.40.1
author maintainer
#245 lore raw

PATCH 243/600 ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Olivier Moysan <[email protected]>

[ Upstream commit c46e9b6cc98245f7264a8d15394d1f95d433abec ]

Use STM32 ADC generic bindings instead of legacy bindings on emtrion GmbH Argon boards.

The STM32 ADC specific binding to declare channels has been deprecated, hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the generic binding. This makes the change mandatory here to avoid a mixed use of legacy and generic binding, which is not supported by the driver.

Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")

---
 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +4 -2
index b01470a9a3d53..94e38141af672 100644
@@ -97,9 +97,11 @@ &adc {
 	adc1: adc@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&adc1_in6_pins_a>;
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <6>;
 		status = "disabled";
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
 	};
 
 	adc2: adc@100 {
Signature · 1 line
2.40.1
author maintainer
#246 lore raw

PATCH 244/600 ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut <[email protected]>

[ Upstream commit 0ee0ef38aa9f75f21b51f729dd42b2e932515188 ]

Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach.

Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" "

Fixes 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
---
 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +2 -2
index 94e38141af672..fd89542c69c93 100644
@@ -368,8 +368,8 @@ &iwdg2 {
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	interrupt-names = "wdg";
Signature · 1 line
2.40.1
author maintainer
#247 lore raw

PATCH 245/600 ARM: dts: stm32: YAML validation fails for Odyssey Boards

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pierre-Yves MORDRET <[email protected]>

[ Upstream commit 84a34e1862aae43e4dcdfb743a7dd3ade1fe4a3c ]

"make dtbs_check" gives following output :
stm32mp157c-odyssey.dt.yaml: gpu@59000000: 'contiguous-area' does not match any of the regexes: 'pinctrl-[0-9]+'

Quoted 1 line

From schema: Documentation/devicetree/bindings/gpu/vivante,gc.yaml

Stable-dep-of: 966f04a89d77 ("ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM")

---
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 10 ----------
 1 file changed, 10 deletions(-)
arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +0 -10
index 2d9461006810c..e22871dc580c8 100644
@@ -62,11 +62,6 @@ retram: retram@38000000 {
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -80,11 +75,6 @@ led-blue {
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
Signature · 1 line
2.40.1
author maintainer
#248 lore raw

PATCH 246/600 ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut <[email protected]>

[ Upstream commit 966f04a89d77548e673de2c400abe0b2cf5c15db ]

Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach.

Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" "

Fixes 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
---
 arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +2 -2
index e22871dc580c8..cf74852514906 100644
@@ -230,8 +230,8 @@ &iwdg2 {
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
Signature · 1 line
2.40.1
author maintainer
#249 lore raw

PATCH 247/600 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut <[email protected]>

[ Upstream commit 9bcfc3cdc903485a52c6f471f4ae96a41fa51803 ]

The generic ADC channel binding is recommended over legacy one, update the DT to the modern binding. No functional change. For further details, see commit which adds the generic binding to STM32 ADC binding document:
'664b9879f56e ("dt-bindings: iio: stm32-adc: add generic channel binding")'

Stable-dep-of: deb7edbc27a6 ("ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM")

---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi  | 18 +++++----
 .../boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 38 +++++++++++++++----
 2 files changed, 40 insertions(+), 16 deletions(-)
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +10 -8
index c06edd2eacb0c..e61df23d361a7 100644
@@ -80,17 +80,19 @@ &adc {
 	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
+};
 
-	adc1: adc@0 {
-		st,min-sample-time-nsecs = <5000>;
-		st,adc-channels = <0>;
-		status = "okay";
+&adc1 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
 	};
+};
 
-	adc2: adc@100 {
-		st,adc-channels = <1>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+&adc2 {
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
 	};
 };
 
arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +30 -8
index dae602b7a54df..b7ba43865514d 100644
@@ -112,17 +112,39 @@ &adc {
 	vdda-supply = <&vdda>;
 	vref-supply = <&vdda>;
 	status = "okay";
+};
 
-	adc1: adc@0 {
-		st,adc-channels = <0 1 6>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+&adc1 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
 	};
 
-	adc2: adc@100 {
-		st,adc-channels = <0 1 2>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@6 {
+		reg = <6>;
+		st,min-sample-time-ns = <5000>;
+	};
+};
+
+&adc2 {
+	channel@0 {
+		reg = <0>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@1 {
+		reg = <1>;
+		st,min-sample-time-ns = <5000>;
+	};
+
+	channel@2 {
+		reg = <2>;
+		st,min-sample-time-ns = <5000>;
 	};
 };
 
Signature · 1 line
2.40.1
author maintainer
#250 lore raw

PATCH 248/600 ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut <[email protected]>

[ Upstream commit deb7edbc27a6ec4d8f5edfd8519b7ed13cbd2a52 ]

Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach.

Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" "

Fixes 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +2 -2
index e61df23d361a7..74a11ccc5333f 100644
@@ -416,8 +416,8 @@ &iwdg2 {
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
Signature · 1 line
2.40.1
author maintainer
#251 lore raw

PATCH 249/600 firmware: ti_sci: Use system_state to determine polling

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nishanth Menon <[email protected]>

[ Upstream commit 9225bcdedf16297a346082e7d23b0e8434aa98ed ]

Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend") aims to resolve issues with tisci operations during system suspend operation. However, the system may enter a no_irq stage in various other usage modes, including power-off and restart. To determine if polling mode is appropriate, use the system_state instead.

While at this, drop the unused is_suspending state variable and related helpers.

---
 drivers/firmware/ti_sci.c | 36 ++----------------------------------
 1 file changed, 2 insertions(+), 34 deletions(-)
drivers/firmware/ti_sci.c +2 -34
index 6281e7153b475..4c550cfbc086c 100644
@@ -97,7 +97,6 @@ struct ti_sci_desc {
  * @node:	list head
  * @host_id:	Host ID
  * @users:	Number of users of this instance
- * @is_suspending: Flag set to indicate in suspend path.
  */
 struct ti_sci_info {
 	struct device *dev;
@@ -116,7 +115,6 @@ struct ti_sci_info {
 	u8 host_id;
 	/* protected by ti_sci_list_mutex */
 	int users;
-	bool is_suspending;
 };
 
 #define cl_to_ti_sci_info(c)	container_of(c, struct ti_sci_info, cl)
@@ -418,14 +416,14 @@ static inline int ti_sci_do_xfer(struct ti_sci_info *info,
 
 	ret = 0;
 
-	if (!info->is_suspending) {
+	if (system_state <= SYSTEM_RUNNING) {
 		/* And we wait for the response. */
 		timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
 		if (!wait_for_completion_timeout(&xfer->done, timeout))
 			ret = -ETIMEDOUT;
 	} else {
 		/*
-		 * If we are suspending, we cannot use wait_for_completion_timeout
+		 * If we are !running, we cannot use wait_for_completion_timeout
 		 * during noirq phase, so we must manually poll the completion.
 		 */
 		ret = read_poll_timeout_atomic(try_wait_for_completion, done_state,
@@ -3282,35 +3280,6 @@ static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode,
 	return NOTIFY_BAD;
 }
 
-static void ti_sci_set_is_suspending(struct ti_sci_info *info, bool is_suspending)
-{
-	info->is_suspending = is_suspending;
-}
-
-static int ti_sci_suspend(struct device *dev)
-{
-	struct ti_sci_info *info = dev_get_drvdata(dev);
-	/*
-	 * We must switch operation to polled mode now as drivers and the genpd
-	 * layer may make late TI SCI calls to change clock and device states
-	 * from the noirq phase of suspend.
-	 */
-	ti_sci_set_is_suspending(info, true);
-
-	return 0;
-}
-
-static int ti_sci_resume(struct device *dev)
-{
-	struct ti_sci_info *info = dev_get_drvdata(dev);
-
-	ti_sci_set_is_suspending(info, false);
-
-	return 0;
-}
-
-static DEFINE_SIMPLE_DEV_PM_OPS(ti_sci_pm_ops, ti_sci_suspend, ti_sci_resume);
-
 /* Description for K2G */
 static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = {
 	.default_host_id = 2,
@@ -3519,7 +3488,6 @@ static struct platform_driver ti_sci_driver = {
 	.driver = {
 		   .name = "ti-sci",
 		   .of_match_table = of_match_ptr(ti_sci_of_match),
-		   .pm = &ti_sci_pm_ops,
 	},
 };
 module_platform_driver(ti_sci_driver);
Signature · 1 line
2.40.1
author maintainer
#252 lore raw

PATCH 250/600 drm/amdgpu: avoid integer overflow warning in amdgpu_device_resize_fb_bar()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit 822130b5e8834ab30ad410cf19a582e5014b9a85 ]

On 32-bit architectures comparing a resource against a value larger than U32_MAX can cause a warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]

                    res->start > 0x100000000ull)
                    ~~~~~~~~~~ ^ ~~~~~~~~~~~~~~

As gcc does not warn about this in dead code, add an IS_ENABLED() check at the start of the function. This will always return success but not actually resize the BAR on 32-bit architectures without high memory, which is exactly what we want here, as the driver can fall back to bank switching the VRAM access.

Fixes 31b8adab3247 ("drm/amdgpu: require a root bus window above 4GB for BAR resize")
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +3 -0
index e6427a00cf6d6..9aac9e755609d 100644
@@ -1212,6 +1212,9 @@ int amdgpu_device_resize_fb_bar(struct amdgpu_device *adev)
 	u16 cmd;
 	int r;
 
+	if (!IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
+		return 0;
+
 	/* Bypass for VF */
 	if (amdgpu_sriov_vf(adev))
 		return 0;
Signature · 1 line
2.40.1
author maintainer
#253 lore raw

PATCH 251/600 ARM: dts: BCM53573: Drop nonexistent #usb-cells

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <[email protected]>

[ Upstream commit 05d2c3d552b8c92fc397377d9d1112fc58e2cd59 ]

Such property simply doesn't exist (is not documented or used anywhere).

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml

---
 arch/arm/boot/dts/bcm53573.dtsi | 2 --
 1 file changed, 2 deletions(-)
arch/arm/boot/dts/bcm53573.dtsi +0 -2
index 3f03a381db0f2..3cb71829e8597 100644
@@ -156,8 +156,6 @@ ehci_port2: port@2 {
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
Signature · 1 line
2.40.1
author maintainer
#254 lore raw

PATCH 252/600 ARM: dts: BCM53573: Add cells sizes to PCIe node

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <[email protected]>

[ Upstream commit 3392ef368d9b04622fe758b1079b512664b6110a ]

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml

Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet.

---
 arch/arm/boot/dts/bcm53573.dtsi | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/boot/dts/bcm53573.dtsi +3 -0
index 3cb71829e8597..eed1a6147f0bf 100644
@@ -127,6 +127,9 @@ uart0: serial@300 {
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
Signature · 1 line
2.40.1
author maintainer
#255 lore raw

PATCH 253/600 ARM: dts: BCM53573: Use updated "spi-gpio" binding properties

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <[email protected]>

[ Upstream commit 2c0fd6b3d0778ceab40205315ccef74568490f17 ]

Switch away from deprecated properties.

This fixes:
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]]
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected)
From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml

---
 arch/arm/boot/dts/bcm947189acdbmr.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/bcm947189acdbmr.dts +3 -3
index 16e70a264faf5..458bb6e2f5728 100644
@@ -60,9 +60,9 @@ button-wps {
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
Signature · 1 line
2.40.1
author maintainer
#256 lore raw

PATCH 254/600 arm64: tegra: Fix HSUART for Jetson AGX Orin

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jon Hunter <[email protected]>

[ Upstream commit 861dbb2b15b1049113887fb95e856f7123eea0cc ]

After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") was applied, the HSUART failed to probe and the following error is seen:

serial-tegra 3100000.serial: Couldn't get the reset
serial-tegra: probe of 3100000.serial failed with error -2

Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") is correct because the "reset-names" property is not needed for 8250 UARTs. However, the "reset-names" is required for the HSUART and should have been populated as part of commit ff578db7b693 ("arm64: tegra: Enable UART instance on 40-pin header") that enabled the HSUART for Jetson AGX Orin. Fix this by populating the "reset-names" property for the HSUART on Jetson AGX Orin.

Fixes ff578db7b693 ("arm64: tegra: Enable UART instance on 40-pin header")
---
 arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +1 -0
index 57ab753288144..f094011be9ed9 100644
@@ -2004,6 +2004,7 @@ interrupt-controller@2a40000 {
 
 		serial@3100000 {
 			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
 			status = "okay";
 		};
 
Signature · 1 line
2.40.1
author maintainer
#257 lore raw

PATCH 255/600 arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit b8fbeea0253211d97c579eae787274633d3eaf0d ]

gpio-keys,wakeup is a deprecated property:

m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)

Fixes a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
---
 arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +2 -2
index 259798a959749..3b710c6a326a5 100644
@@ -60,7 +60,7 @@ key-camera-focus {
 			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-camera-snapshot {
@@ -69,7 +69,7 @@ key-camera-snapshot {
 			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 			linux,can-disable;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-vol-down {
Signature · 1 line
2.40.1
author maintainer
#258 lore raw

PATCH 256/600 arm64: dts: qcom: pm6150l: Add missing short interrupt

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 7e1f024ef0d1da456f61d00f01dc3287ede915b3 ]

Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

---
 arch/arm64/boot/dts/qcom/pm6150l.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/pm6150l.dtsi +3 -2
index f02c223ef4485..06d729ff65a9d 100644
@@ -75,8 +75,9 @@ pm6150l_lsid5: pmic@5 {
 		pm6150l_wled: leds@d800 {
 			compatible = "qcom,pm6150l-wled";
 			reg = <0xd800>, <0xd900>;
-			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ovp";
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
 			label = "backlight";
 
 			status = "disabled";
Signature · 1 line
2.40.1
author maintainer
#259 lore raw

PATCH 257/600 arm64: dts: qcom: pm660l: Add missing short interrupt

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 9a4ac09db3c7413e334b4abd6b2f6de8930dd781 ]

Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

Fixes 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support")
---
 arch/arm64/boot/dts/qcom/pm660l.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/pm660l.dtsi +3 -2
index 8aa0a5078772b..88606b996d690 100644
@@ -74,8 +74,9 @@ pm660l_lpg: pwm {
 		pm660l_wled: leds@d800 {
 			compatible = "qcom,pm660l-wled";
 			reg = <0xd800>, <0xd900>;
-			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ovp";
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
 			label = "backlight";
 
 			status = "disabled";
Signature · 1 line
2.40.1
author maintainer
#260 lore raw

PATCH 258/600 arm64: dts: qcom: pmi8994: Add missing OVP interrupt

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 8db94432690371b1736e9a2566a9b3d8a73d5a97 ]

Add the missing OVP interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['short'] is too short

Fixes 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node")
---
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/pmi8994.dtsi +3 -2
index 82b60e988d0f5..49902a3e161d9 100644
@@ -54,8 +54,9 @@ pmi8994_spmi_regulators: regulators {
 		pmi8994_wled: wled@d800 {
 			compatible = "qcom,pmi8994-wled";
 			reg = <0xd800>, <0xd900>;
-			interrupts = <3 0xd8 0x02 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "short";
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
 			qcom,cabc;
 			qcom,external-pfet;
 			status = "disabled";
Signature · 1 line
2.40.1
author maintainer
#261 lore raw

PATCH 259/600 arm64: tegra: Fix HSUART for Smaug

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Diogo Ivo <[email protected]>

[ Upstream commit 590bfe51838f6345a6a3288507661dc9b7208464 ]

After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") was applied, the HSUART failed to probe and the following error is seen:

serial-tegra 70006300.serial: Couldn't get the reset
serial-tegra: probe of 70006300.serial failed with error -2

Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") is correct because the "reset-names" property is not needed for 8250 UARTs. However, the "reset-names" is required for the HSUART and should have been populated as part of commit a63c0cd83720c ("arm64: dts: tegra: smaug: Add Bluetooth node") that enabled the HSUART for the Pixel C. Fix this by populating the "reset-names" property for the HSUART on the Pixel C.

Fixes a63c0cd83720 ("arm64: dts: tegra: smaug: Add Bluetooth node")
---
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +1 -0
index 7c569695b7052..2b4dbfac84a70 100644
@@ -1312,6 +1312,7 @@ serial@70006000 {
 
 	uartd: serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
 		status = "okay";
 
 		bluetooth {
Signature · 1 line
2.40.1
author maintainer
#262 lore raw

PATCH 260/600 drm/etnaviv: fix dumping of active MMU context

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lucas Stach <[email protected]>

[ Upstream commit 20faf2005ec85fa1a6acc9a74ff27de667f90576 ]

gpu->mmu_context is the MMU context of the last job in the HW queue, which isn't necessarily the same as the context from the bad job. Dump the MMU context from the scheduler determined bad submit to make it work as intended.

Fixes 17e4660ae3d7 ("drm/etnaviv: implement per-process address spaces on MMUv2")
---
 drivers/gpu/drm/etnaviv/etnaviv_dump.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/etnaviv/etnaviv_dump.c +7 -7
index f418e0b75772e..0edcf8ceb4a78 100644
@@ -125,9 +125,9 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit)
 		return;
 	etnaviv_dump_core = false;
 
-	mutex_lock(&gpu->mmu_context->lock);
+	mutex_lock(&submit->mmu_context->lock);
 
-	mmu_size = etnaviv_iommu_dump_size(gpu->mmu_context);
+	mmu_size = etnaviv_iommu_dump_size(submit->mmu_context);
 
 	/* We always dump registers, mmu, ring, hanging cmdbuf and end marker */
 	n_obj = 5;
@@ -157,7 +157,7 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit)
 	iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_NOWARN |
 			__GFP_NORETRY);
 	if (!iter.start) {
-		mutex_unlock(&gpu->mmu_context->lock);
+		mutex_unlock(&submit->mmu_context->lock);
 		dev_warn(gpu->dev, "failed to allocate devcoredump file\n");
 		return;
 	}
@@ -169,18 +169,18 @@ void etnaviv_core_dump(struct etnaviv_gem_submit *submit)
 	memset(iter.hdr, 0, iter.data - iter.start);
 
 	etnaviv_core_dump_registers(&iter, gpu);
-	etnaviv_core_dump_mmu(&iter, gpu->mmu_context, mmu_size);
+	etnaviv_core_dump_mmu(&iter, submit->mmu_context, mmu_size);
 	etnaviv_core_dump_mem(&iter, ETDUMP_BUF_RING, gpu->buffer.vaddr,
 			      gpu->buffer.size,
 			      etnaviv_cmdbuf_get_va(&gpu->buffer,
-					&gpu->mmu_context->cmdbuf_mapping));
+					&submit->mmu_context->cmdbuf_mapping));
 
 	etnaviv_core_dump_mem(&iter, ETDUMP_BUF_CMD,
 			      submit->cmdbuf.vaddr, submit->cmdbuf.size,
 			      etnaviv_cmdbuf_get_va(&submit->cmdbuf,
-					&gpu->mmu_context->cmdbuf_mapping));
+					&submit->mmu_context->cmdbuf_mapping));
 
-	mutex_unlock(&gpu->mmu_context->lock);
+	mutex_unlock(&submit->mmu_context->lock);
 
 	/* Reserve space for the bomap */
 	if (n_bomap_pages) {
Signature · 1 line
2.40.1
author maintainer
#263 lore raw

PATCH 261/600 block: cleanup queue_wc_store

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <[email protected]>

[ Upstream commit c4e21bcd0f9d01f9c5d6c52007f5541871a5b1de ]

Get rid of the local queue_wc_store variable and handling setting and clearing the QUEUE_FLAG_WC flag diretly instead the if / else if.

Stable-dep-of: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")

---
 block/blk-sysfs.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)
block/blk-sysfs.c +3 -11
index e71b3b43927c0..4f34525bafac7 100644
@@ -528,21 +528,13 @@ static ssize_t queue_wc_show(struct request_queue *q, char *page)
 static ssize_t queue_wc_store(struct request_queue *q, const char *page,
 			      size_t count)
 {
-	int set = -1;
-
 	if (!strncmp(page, "write back", 10))
-		set = 1;
+		blk_queue_flag_set(QUEUE_FLAG_WC, q);
 	else if (!strncmp(page, "write through", 13) ||
 		 !strncmp(page, "none", 4))
-		set = 0;
-
-	if (set == -1)
-		return -EINVAL;
-
-	if (set)
-		blk_queue_flag_set(QUEUE_FLAG_WC, q);
-	else
 		blk_queue_flag_clear(QUEUE_FLAG_WC, q);
+	else
+		return -EINVAL;
 
 	return count;
 }
Signature · 1 line
2.40.1
author maintainer
#264 lore raw

PATCH 262/600 block: dont allow enabling a cache on devices that dont support it

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig <[email protected]>

[ Upstream commit 43c9835b144c7ce29efe142d662529662a9eb376 ]

Currently the write_cache attribute allows enabling the QUEUE_FLAG_WC flag on devices that never claimed the capability.

Fix that by adding a QUEUE_FLAG_HW_WC flag that is set by blk_queue_write_cache and guards re-enabling the cache through sysfs.

Note that any rescan that calls blk_queue_write_cache will still re-enable the write cache as in the current code.

Fixes 93e9d8e836cb ("block: add ability to flag write back caching on a device")
---
 block/blk-settings.c   |  7 +++++--
 block/blk-sysfs.c      | 11 +++++++----
 include/linux/blkdev.h |  1 +
 3 files changed, 13 insertions(+), 6 deletions(-)
block/blk-settings.c +5 -2
index 291cf9df7fc29..86ff375c00ce4 100644
@@ -824,10 +824,13 @@ EXPORT_SYMBOL(blk_set_queue_depth);
  */
 void blk_queue_write_cache(struct request_queue *q, bool wc, bool fua)
 {
-	if (wc)
+	if (wc) {
+		blk_queue_flag_set(QUEUE_FLAG_HW_WC, q);
 		blk_queue_flag_set(QUEUE_FLAG_WC, q);
-	else
+	} else {
+		blk_queue_flag_clear(QUEUE_FLAG_HW_WC, q);
 		blk_queue_flag_clear(QUEUE_FLAG_WC, q);
+	}
 	if (fua)
 		blk_queue_flag_set(QUEUE_FLAG_FUA, q);
 	else
block/blk-sysfs.c +7 -4
index 4f34525bafac7..a582ea0da74f5 100644
@@ -528,13 +528,16 @@ static ssize_t queue_wc_show(struct request_queue *q, char *page)
 static ssize_t queue_wc_store(struct request_queue *q, const char *page,
 			      size_t count)
 {
-	if (!strncmp(page, "write back", 10))
+	if (!strncmp(page, "write back", 10)) {
+		if (!test_bit(QUEUE_FLAG_HW_WC, &q->queue_flags))
+			return -EINVAL;
 		blk_queue_flag_set(QUEUE_FLAG_WC, q);
-	else if (!strncmp(page, "write through", 13) ||
-		 !strncmp(page, "none", 4))
+	} else if (!strncmp(page, "write through", 13) ||
+		 !strncmp(page, "none", 4)) {
 		blk_queue_flag_clear(QUEUE_FLAG_WC, q);
-	else
+	} else {
 		return -EINVAL;
+	}
 
 	return count;
 }
include/linux/blkdev.h +1 -0
index 427e79ac72194..57674b3c58774 100644
@@ -565,6 +565,7 @@ struct request_queue {
 #define QUEUE_FLAG_NOXMERGES	9	/* No extended merges */
 #define QUEUE_FLAG_ADD_RANDOM	10	/* Contributes to random pool */
 #define QUEUE_FLAG_SAME_FORCE	12	/* force complete on same CPU */
+#define QUEUE_FLAG_HW_WC	18	/* Write back caching supported */
 #define QUEUE_FLAG_INIT_DONE	14	/* queue is initialized */
 #define QUEUE_FLAG_STABLE_WRITES 15	/* don't modify blks until WB is done */
 #define QUEUE_FLAG_POLL		16	/* IO polling enabled if set */
Signature · 1 line
2.40.1
author maintainer
#265 lore raw

PATCH 263/600 x86/mm: Fix PAT bit missing from page protection modify mask

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Janusz Krzysztofik <[email protected]>

[ Upstream commit 548cb932051fb6232ac983ed6673dae7bdf3cf4c ]

Visible glitches have been observed when running graphics applications on Linux under Xen hypervisor. Those observations have been confirmed with failures from kms_pwrite_crc Intel GPU test that verifies data coherency of DRM frame buffer objects using hardware CRC checksums calculated by display controllers, exposed to userspace via debugfs. Affected processing paths have then been identified with new IGT test variants that mmap the objects using different methods and caching modes [1].

When running as a Xen PV guest, Linux uses Xen provided PAT configuration which is different from its native one. In particular, Xen specific PTE encoding of write-combining caching, likely used by graphics applications, differs from the Linux default one found among statically defined minimal set of supported modes. Since Xen defines PTE encoding of the WC mode as _PAGE_PAT, it no longer belongs to the minimal set, depends on correct handling of _PAGE_PAT bit, and can be mismatched with write-back caching.

When a user calls mmap() for a DRM buffer object, DRM device specific .mmap file operation, called from mmap_region(), takes care of setting PTE encoding bits in a vm_page_prot field of an associated virtual memory area structure. Unfortunately, _PAGE_PAT bit is not preserved when the vma's .vm_flags are then applied to .vm_page_prot via vm_set_page_prot(). Bits to be preserved are determined with _PAGE_CHG_MASK symbol that doesn't cover _PAGE_PAT. As a consequence, WB caching is requested instead of WC when running under Xen (also, WP is silently changed to WT, and UC downgraded to UC_MINUS). When running on bare metal, WC is not affected, but WP and WT extra modes are unintentionally replaced with WC and UC, respectively.

WP and WT modes, encoded with _PAGE_PAT bit set, were introduced by commit 281d4078bec3 ("x86: Make page cache mode a real type"). Care was taken to extend _PAGE_CACHE_MASK symbol with that additional bit, but that symbol has never been used for identification of bits preserved when applying page protection flags. Support for all cache modes under Xen, including the problematic WC mode, was then introduced by commit 47591df50512 ("xen: Support Xen pv-domains using PAT").

The issue needs to be fixed by including _PAGE_PAT bit into a bitmask used by pgprot_modify() for selecting bits to be preserved. We can do that either internally to pgprot_modify() (as initially proposed), or by making _PAGE_PAT a part of _PAGE_CHG_MASK. If we go for the latter then, since _PAGE_PAT is the same as _PAGE_PSE, we need to note that _HPAGE_CHG_MASK -- a huge pmds' counterpart of _PAGE_CHG_MASK, introduced by commit c489f1257b8c ("thp: add pmd_modify"), defined as (_PAGE_CHG_MASK | _PAGE_PSE) -- will no longer differ from _PAGE_CHG_MASK. If such modification of _PAGE_CHG_MASK was irrelevant to its users then one might wonder why that new _HPAGE_CHG_MASK symbol was introduced instead of reusing the existing one with that otherwise irrelevant bit (_PAGE_PSE in that case) added.

Add _PAGE_PAT to _PAGE_CHG_MASK and _PAGE_PAT_LARGE to _HPAGE_CHG_MASK for symmetry. Split out common bits from both symbols to a common symbol for clarity.

[ dhansen: tweak the solution changelog description ]

[1] https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/0f0754413f14

---
 arch/x86/include/asm/pgtable_types.h | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
arch/x86/include/asm/pgtable_types.h +6 -5
index aa174fed3a71c..f6116b66f2892 100644
@@ -125,11 +125,12 @@
  * instance, and is *not* included in this mask since
  * pte_modify() does modify it.
  */
-#define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |	\
-			 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP | _PAGE_ENC |  \
-			 _PAGE_UFFD_WP)
-#define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
+#define _COMMON_PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |	       \
+				 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |\
+				 _PAGE_SOFT_DIRTY | _PAGE_DEVMAP | _PAGE_ENC | \
+				 _PAGE_UFFD_WP)
+#define _PAGE_CHG_MASK	(_COMMON_PAGE_CHG_MASK | _PAGE_PAT)
+#define _HPAGE_CHG_MASK (_COMMON_PAGE_CHG_MASK | _PAGE_PSE | _PAGE_PAT_LARGE)
 
 /*
  * The cache modes defined here are used to translate between pure SW usage
Signature · 1 line
2.40.1
author maintainer
#266 lore raw

PATCH 264/600 drm/bridge: anx7625: Use common macros for DP power sequencing commands

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 2ba776f903cb7157e80b5f314fb0b4faf6ea6958 ]

The DRM DP code has macros for the DP power sequencing commands. Use them in the anx7625 driver instead of raw numbers.

Fixes 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status")
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/bridge/analogix/anx7625.c +4 -4
index 213263ad6a064..36ec9dedadfe1 100644
@@ -933,8 +933,8 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
 
 	dev_dbg(dev, "set downstream sink into normal\n");
 	/* Downstream sink enter into normal mode */
-	data = 1;
-	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+	data = DP_SET_POWER_D0;
+	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
 	if (ret < 0)
 		dev_err(dev, "IO error : set sink into normal mode fail\n");
 
@@ -973,8 +973,8 @@ static void anx7625_dp_stop(struct anx7625_data *ctx)
 
 	dev_dbg(dev, "notify downstream enter into standby\n");
 	/* Downstream monitor enter into standby mode */
-	data = 2;
-	ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
+	data = DP_SET_POWER_D3;
+	ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, DP_SET_POWER, 1, &data);
 	if (ret < 0)
 		DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
 
Signature · 1 line
2.40.1
author maintainer
#267 lore raw

PATCH 265/600 drm/bridge: anx7625: Use common macros for HDCP capabilities

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 41639b3a8b0f1f194dfe0577d99db70613f78626 ]

The DRM DP code has macros for the DP HDCP capabilities. Use them in the anx7625 driver instead of raw numbers.

---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/analogix/anx7625.c +2 -2
index 36ec9dedadfe1..cf86cc05b7fca 100644
@@ -874,11 +874,11 @@ static int anx7625_hdcp_enable(struct anx7625_data *ctx)
 	}
 
 	/* Read downstream capability */
-	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_READ, 0x68028, 1, &bcap);
+	ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_READ, DP_AUX_HDCP_BCAPS, 1, &bcap);
 	if (ret < 0)
 		return ret;
 
-	if (!(bcap & 0x01)) {
+	if (!(bcap & DP_BCAPS_HDCP_CAPABLE)) {
 		pr_warn("downstream not support HDCP 1.4, cap(%x).\n", bcap);
 		return 0;
 	}
Signature · 1 line
2.40.1
author maintainer
#268 lore raw

PATCH 266/600 ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit cf0cb2af6a18f28b84f9f1416bff50ca60d6e98a ]

The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Fixes a43736deb47d ("ARM: dts: Add dts file for S3C6410-based Mini6410 board")
---
 arch/arm/boot/dts/s3c6410-mini6410.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/s3c6410-mini6410.dts +1 -1
index 17097da36f5ed..0b07b3c319604 100644
@@ -51,7 +51,7 @@ srom-cs1-bus@18000000 {
 
 		ethernet@18000000 {
 			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
+			reg = <0x18000000 0x2>, <0x18000004 0x2>;
 			interrupt-parent = <&gpn>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			davicom,no-eeprom;
Signature · 1 line
2.40.1
author maintainer
#269 lore raw

PATCH 267/600 ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit b77904ba177a9c67b6dbc3637fdf1faa22df6e5c ]

Backlight is supplied by DC5V regulator. The DTS has no PMIC node, so just add a regulator-fixed to solve it and fix dtbs_check warning:

s5pv210-smdkv210.dtb: backlight: 'power-supply' is a required property

Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)")

---
 arch/arm/boot/dts/s5pv210-smdkv210.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/s5pv210-smdkv210.dts +8 -0
index fbae768d65e27..6e26c67e0a26e 100644
@@ -55,6 +55,14 @@ backlight {
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_out>;
+		power-supply = <&dc5v_reg>;
+	};
+
+	dc5v_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "DC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 
Signature · 1 line
2.40.1
author maintainer
#270 lore raw

PATCH 268/600 ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 982655cb0e7f18934d7532c32366e574ad61dbd7 ]

The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Fixes b672b27d232e ("ARM: dts: Add Device tree for s5pc110/s5pv210 boards")
---
 arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/s5pv210-smdkv210.dts +1 -1
index 6e26c67e0a26e..901e7197b1368 100644
@@ -41,7 +41,7 @@ pmic_ap_clk: clock-0 {
 
 	ethernet@a8000000 {
 		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
 		interrupt-parent = <&gph1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 		local-mac-address = [00 00 de ad be ef];
Signature · 1 line
2.40.1
author maintainer
#271 lore raw

PATCH 269/600 drm: adv7511: Fix low refresh rate register for ADV7533/5

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bogdan Togorean <[email protected]>

[ Upstream commit d281eeaa4de2636ff0c8e6ae387bb07b50e5fcbb ]

For ADV7533 and ADV7535 low refresh rate is selected using bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.

---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +7 -2
index 78b72739e5c3e..9f9874acfb2b7 100644
@@ -786,8 +786,13 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
 	else
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
 
-	regmap_update_bits(adv7511->regmap, 0xfb,
-		0x6, low_refresh_rate << 1);
+	if (adv7511->type == ADV7511)
+		regmap_update_bits(adv7511->regmap, 0xfb,
+				   0x6, low_refresh_rate << 1);
+	else
+		regmap_update_bits(adv7511->regmap, 0x4a,
+				   0xc, low_refresh_rate << 2);
+
 	regmap_update_bits(adv7511->regmap, 0x17,
 		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
 
Signature · 1 line
2.40.1
author maintainer
#272 lore raw

PATCH 270/600 ARM: dts: BCM53573: Fix Ethernet info for Luxul devices

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <[email protected]>

[ Upstream commit 44ad8207806973f4e4f7d870fff36cc01f494250 ]

Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that use a non-default design. They don't include switch but have a single Ethernet port and BCM54210E PHY connected to the Ethernet controller's MDIO bus.

Support for those devices regressed due to two changes:

1. Describing MDIO bus with switch
After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Linux stopped probing for MDIO devices.

2. Dropping hardcoded BCM54210E delays
In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays configuration for BCM54210E") support for other PHY modes was added but that requires a proper "phy-mode" value in DT.

Both above changes are correct (they don't need to be reverted or anything) but they need this fix for DT data to be correct and for Linux to work properly.

Fixes 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
---
 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 13 +++++++++++++
 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts  | 13 +++++++++++++
 2 files changed, 26 insertions(+)
arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +13 -0
index e20b6d2eb274a..1e23e0a807819 100644
@@ -46,3 +46,16 @@ button-restart {
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +13 -0
index 9d863570fcf3a..5dbb950c8113e 100644
@@ -83,3 +83,16 @@ pcie0_chipcommon: chipcommon@0 {
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
Signature · 1 line
2.40.1
author maintainer
#273 lore raw

PATCH 271/600 arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Manivannan Sadhasivam <[email protected]>

[ Upstream commit 4b6ea15c0a1122422b44bf6c47a3c22fc8d46777 ]

GCC and it's GDSCs are under the RPMh CX power domain. So let's add the missing RPMh power domain to the GCC node.

---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sdm845.dtsi +1 -0
index b7ba70857d0ad..375c86633b5b9 100644
@@ -1099,6 +1099,7 @@ gcc: clock-controller@100000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SDM845_CX>;
 		};
 
 		qfprom@784000 {
Signature · 1 line
2.40.1
author maintainer
#274 lore raw

PATCH 272/600 arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk"

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Manivannan Sadhasivam <[email protected]>

[ Upstream commit bbbef6e24bc4493602df68b052f6f48d48e3184a ]

Minimum frequency of the "ice_core_clk" should be 75MHz as specified in the downstream vendor devicetree. So fix it!

https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.7.3.r1-09300-sdm845.0/arch/arm64/boot/dts/qcom/sdm845.dtsi

Fixes 433f9a57298f ("arm64: dts: sdm845: add Inline Crypto Engine registers and clock")
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/sdm845.dtsi +1 -1
index 375c86633b5b9..52c9f5639f8a2 100644
@@ -2521,7 +2521,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				<0 0>,
 				<0 0>,
 				<0 0>,
-				<0 300000000>;
+				<75000000 300000000>;
 
 			status = "disabled";
 		};
Signature · 1 line
2.40.1
author maintainer
#275 lore raw

PATCH 273/600 arm64: dts: qcom: msm8996-gemini: fix touchscreen VIO supply

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 21fc24ee9c5943732c9ae538766c9be93d70d936 ]

According to bindings and Linux driver, there is no VDDA but VIO supply.

Fixes 4ac46b3682c5 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
---
 arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +1 -1
index 4e5264f4116a0..3bbafb68ba5c5 100644
@@ -81,7 +81,7 @@ synaptics@20 {
 		#size-cells = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
-		vdda-supply = <&vreg_l6a_1p8>;
+		vio-supply = <&vreg_l6a_1p8>;
 		vdd-supply = <&vdd_3v2_tp>;
 		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 
Signature · 1 line
2.40.1
author maintainer
#276 lore raw

PATCH 274/600 drm/amdgpu: Update min() to min_t() in amdgpu_info_ioctl

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Srinivasan Shanmugam <[email protected]>

[ Upstream commit a0cc8e1512ad72c9f97cdcb76d42715730adaf62 ]

Fixes the following:

WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));

And other style fixes:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +8 -6
index 4e42dcb1950f7..9e3313dd956ae 100644
@@ -554,6 +554,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 			crtc = (struct drm_crtc *)minfo->crtcs[i];
 			if (crtc && crtc->base.id == info->mode_crtc.id) {
 				struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc);
+
 				ui32 = amdgpu_crtc->crtc_id;
 				found = 1;
 				break;
@@ -572,7 +573,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 		if (ret)
 			return ret;
 
-		ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
+		ret = copy_to_user(out, &ip, min_t(size_t, size, sizeof(ip)));
 		return ret ? -EFAULT : 0;
 	}
 	case AMDGPU_INFO_HW_IP_COUNT: {
@@ -718,17 +719,18 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 				    ? -EFAULT : 0;
 	}
 	case AMDGPU_INFO_READ_MMR_REG: {
-		unsigned n, alloc_size;
+		unsigned int n, alloc_size;
 		uint32_t *regs;
-		unsigned se_num = (info->read_mmr_reg.instance >>
+		unsigned int se_num = (info->read_mmr_reg.instance >>
 				   AMDGPU_INFO_MMR_SE_INDEX_SHIFT) &
 				  AMDGPU_INFO_MMR_SE_INDEX_MASK;
-		unsigned sh_num = (info->read_mmr_reg.instance >>
+		unsigned int sh_num = (info->read_mmr_reg.instance >>
 				   AMDGPU_INFO_MMR_SH_INDEX_SHIFT) &
 				  AMDGPU_INFO_MMR_SH_INDEX_MASK;
 
 		/* set full masks if the userspace set all bits
-		 * in the bitfields */
+		 * in the bitfields
+		 */
 		if (se_num == AMDGPU_INFO_MMR_SE_INDEX_MASK)
 			se_num = 0xffffffff;
 		else if (se_num >= AMDGPU_GFX_MAX_SE)
@@ -852,7 +854,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 		return ret;
 	}
 	case AMDGPU_INFO_VCE_CLOCK_TABLE: {
-		unsigned i;
+		unsigned int i;
 		struct drm_amdgpu_info_vce_clock_table vce_clk_table = {};
 		struct amd_vce_state *vce_state;
 
Signature · 1 line
2.40.1
author maintainer
#277 lore raw

PATCH 275/600 md: Factor out is_md_suspended helper

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiao Ni <[email protected]>

[ Upstream commit d19329133d25ad3dc32f8a62635692cb2f189014 ]

This helper function will be used in next patch. It's easy for understanding.

Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()")

---
 drivers/md/md.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/md/md.c +12 -5
index 45daba0eb9310..abb6c03c85b29 100644
@@ -368,6 +368,13 @@ EXPORT_SYMBOL_GPL(md_new_event);
 static LIST_HEAD(all_mddevs);
 static DEFINE_SPINLOCK(all_mddevs_lock);
 
+static bool is_md_suspended(struct mddev *mddev)
+{
+	if (mddev->suspended)
+		return true;
+	else
+		return false;
+}
 /* Rather than calling directly into the personality make_request function,
  * IO requests come here first so that we can check if the device is
  * being suspended pending a reconfiguration.
@@ -377,7 +384,7 @@ static DEFINE_SPINLOCK(all_mddevs_lock);
  */
 static bool is_suspended(struct mddev *mddev, struct bio *bio)
 {
-	if (mddev->suspended)
+	if (is_md_suspended(mddev))
 		return true;
 	if (bio_data_dir(bio) != WRITE)
 		return false;
@@ -422,7 +429,7 @@ void md_handle_request(struct mddev *mddev, struct bio *bio)
 		goto check_suspended;
 	}
 
-	if (atomic_dec_and_test(&mddev->active_io) && mddev->suspended)
+	if (atomic_dec_and_test(&mddev->active_io) && is_md_suspended(mddev))
 		wake_up(&mddev->sb_wait);
 }
 EXPORT_SYMBOL(md_handle_request);
@@ -6238,7 +6245,7 @@ EXPORT_SYMBOL_GPL(md_stop_writes);
 static void mddev_detach(struct mddev *mddev)
 {
 	md_bitmap_wait_behind_writes(mddev);
-	if (mddev->pers && mddev->pers->quiesce && !mddev->suspended) {
+	if (mddev->pers && mddev->pers->quiesce && !is_md_suspended(mddev)) {
 		mddev->pers->quiesce(mddev, 1);
 		mddev->pers->quiesce(mddev, 0);
 	}
@@ -8548,7 +8555,7 @@ bool md_write_start(struct mddev *mddev, struct bio *bi)
 		return true;
 	wait_event(mddev->sb_wait,
 		   !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags) ||
-		   mddev->suspended);
+		   is_md_suspended(mddev));
 	if (test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) {
 		percpu_ref_put(&mddev->writes_pending);
 		return false;
@@ -9276,7 +9283,7 @@ void md_check_recovery(struct mddev *mddev)
 		wake_up(&mddev->sb_wait);
 	}
 
-	if (mddev->suspended)
+	if (is_md_suspended(mddev))
 		return;
 
 	if (mddev->bitmap)
Signature · 1 line
2.40.1
author maintainer
#278 lore raw

PATCH 276/600 md: Change active_io to percpu

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiao Ni <[email protected]>

[ Upstream commit 72adae23a72cb12e2ef0dcd7c0aa042867f27998 ]

Now the type of active_io is atomic. It's used to count how many ios are in the submitting process and it's added and decreased very time. But it only needs to check if it's zero when suspending the raid. So we can switch atomic to percpu to improve the performance.

After switching active_io to percpu type, we use the state of active_io to judge if the raid device is suspended. And we don't need to wake up ->sb_wait in md_handle_request anymore. It's done in the callback function which is registered when initing active_io. The argument mddev->suspended is only used to count how many users are trying to set raid to suspend state.

Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()")

---
 drivers/md/md.c | 43 ++++++++++++++++++++++++-------------------
 drivers/md/md.h |  2 +-
 2 files changed, 25 insertions(+), 20 deletions(-)
drivers/md/md.c +24 -19
index abb6c03c85b29..1c44294c625a4 100644
@@ -370,10 +370,7 @@ static DEFINE_SPINLOCK(all_mddevs_lock);
 
 static bool is_md_suspended(struct mddev *mddev)
 {
-	if (mddev->suspended)
-		return true;
-	else
-		return false;
+	return percpu_ref_is_dying(&mddev->active_io);
 }
 /* Rather than calling directly into the personality make_request function,
  * IO requests come here first so that we can check if the device is
@@ -400,12 +397,10 @@ static bool is_suspended(struct mddev *mddev, struct bio *bio)
 void md_handle_request(struct mddev *mddev, struct bio *bio)
 {
 check_suspended:
-	rcu_read_lock();
 	if (is_suspended(mddev, bio)) {
 		DEFINE_WAIT(__wait);
 		/* Bail out if REQ_NOWAIT is set for the bio */
 		if (bio->bi_opf & REQ_NOWAIT) {
-			rcu_read_unlock();
 			bio_wouldblock_error(bio);
 			return;
 		}
@@ -414,23 +409,19 @@ void md_handle_request(struct mddev *mddev, struct bio *bio)
 					TASK_UNINTERRUPTIBLE);
 			if (!is_suspended(mddev, bio))
 				break;
-			rcu_read_unlock();
 			schedule();
-			rcu_read_lock();
 		}
 		finish_wait(&mddev->sb_wait, &__wait);
 	}
-	atomic_inc(&mddev->active_io);
-	rcu_read_unlock();
+	if (!percpu_ref_tryget_live(&mddev->active_io))
+		goto check_suspended;
 
 	if (!mddev->pers->make_request(mddev, bio)) {
-		atomic_dec(&mddev->active_io);
-		wake_up(&mddev->sb_wait);
+		percpu_ref_put(&mddev->active_io);
 		goto check_suspended;
 	}
 
-	if (atomic_dec_and_test(&mddev->active_io) && is_md_suspended(mddev))
-		wake_up(&mddev->sb_wait);
+	percpu_ref_put(&mddev->active_io);
 }
 EXPORT_SYMBOL(md_handle_request);
 
@@ -478,11 +469,10 @@ void mddev_suspend(struct mddev *mddev)
 	lockdep_assert_held(&mddev->reconfig_mutex);
 	if (mddev->suspended++)
 		return;
-	synchronize_rcu();
 	wake_up(&mddev->sb_wait);
 	set_bit(MD_ALLOW_SB_UPDATE, &mddev->flags);
-	smp_mb__after_atomic();
-	wait_event(mddev->sb_wait, atomic_read(&mddev->active_io) == 0);
+	percpu_ref_kill(&mddev->active_io);
+	wait_event(mddev->sb_wait, percpu_ref_is_zero(&mddev->active_io));
 	mddev->pers->quiesce(mddev, 1);
 	clear_bit_unlock(MD_ALLOW_SB_UPDATE, &mddev->flags);
 	wait_event(mddev->sb_wait, !test_bit(MD_UPDATING_SB, &mddev->flags));
@@ -500,6 +490,7 @@ void mddev_resume(struct mddev *mddev)
 	lockdep_assert_held(&mddev->reconfig_mutex);
 	if (--mddev->suspended)
 		return;
+	percpu_ref_resurrect(&mddev->active_io);
 	wake_up(&mddev->sb_wait);
 	mddev->pers->quiesce(mddev, 0);
 
@@ -678,7 +669,6 @@ void mddev_init(struct mddev *mddev)
 	timer_setup(&mddev->safemode_timer, md_safemode_timeout, 0);
 	atomic_set(&mddev->active, 1);
 	atomic_set(&mddev->openers, 0);
-	atomic_set(&mddev->active_io, 0);
 	spin_lock_init(&mddev->lock);
 	atomic_set(&mddev->flush_pending, 0);
 	init_waitqueue_head(&mddev->sb_wait);
@@ -5786,6 +5776,12 @@ static void md_safemode_timeout(struct timer_list *t)
 }
 
 static int start_dirty_degraded;
+static void active_io_release(struct percpu_ref *ref)
+{
+	struct mddev *mddev = container_of(ref, struct mddev, active_io);
+
+	wake_up(&mddev->sb_wait);
+}
 
 int md_run(struct mddev *mddev)
 {
@@ -5866,10 +5862,15 @@ int md_run(struct mddev *mddev)
 		nowait = nowait && bdev_nowait(rdev->bdev);
 	}
 
+	err = percpu_ref_init(&mddev->active_io, active_io_release,
+				PERCPU_REF_ALLOW_REINIT, GFP_KERNEL);
+	if (err)
+		return err;
+
 	if (!bioset_initialized(&mddev->bio_set)) {
 		err = bioset_init(&mddev->bio_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
 		if (err)
-			return err;
+			goto exit_active_io;
 	}
 	if (!bioset_initialized(&mddev->sync_set)) {
 		err = bioset_init(&mddev->sync_set, BIO_POOL_SIZE, 0, BIOSET_NEED_BVECS);
@@ -6057,6 +6058,8 @@ int md_run(struct mddev *mddev)
 	bioset_exit(&mddev->sync_set);
 exit_bio_set:
 	bioset_exit(&mddev->bio_set);
+exit_active_io:
+	percpu_ref_exit(&mddev->active_io);
 	return err;
 }
 EXPORT_SYMBOL_GPL(md_run);
@@ -6283,6 +6286,7 @@ void md_stop(struct mddev *mddev)
 	 */
 	__md_stop_writes(mddev);
 	__md_stop(mddev);
+	percpu_ref_exit(&mddev->active_io);
 	bioset_exit(&mddev->bio_set);
 	bioset_exit(&mddev->sync_set);
 }
@@ -7852,6 +7856,7 @@ static void md_free_disk(struct gendisk *disk)
 	struct mddev *mddev = disk->private_data;
 
 	percpu_ref_exit(&mddev->writes_pending);
+	percpu_ref_exit(&mddev->active_io);
 	bioset_exit(&mddev->bio_set);
 	bioset_exit(&mddev->sync_set);
 
drivers/md/md.h +1 -1
index b4e2d8b87b611..64f8182a3dfc6 100644
@@ -315,7 +315,7 @@ struct mddev {
 	unsigned long			sb_flags;
 
 	int				suspended;
-	atomic_t			active_io;
+	struct percpu_ref		active_io;
 	int				ro;
 	int				sysfs_active; /* set when sysfs deletes
 						       * are happening, so run/
Signature · 1 line
2.40.1
author maintainer
#279 lore raw

PATCH 277/600 md: restore noio_flag for the last mddev_resume()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Kuai <[email protected]>

[ Upstream commit e24ed04389f9619e0aaef615a8948633c182a8b0 ]

memalloc_noio_save() is called for the first mddev_suspend(), and repeated mddev_suspend() only increase 'suspended'. However, memalloc_noio_restore() is also called for the first mddev_resume(), which means that memory reclaim will be enabled before the last mddev_resume() is called, while the array is still suspended.

Fix this problem by restore 'noio_flag' for the last mddev_resume().

Fixes 78f57ef9d50a ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()")
---
 drivers/md/md.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/md/md.c +4 -2
index 1c44294c625a4..443837fe6291e 100644
@@ -485,11 +485,13 @@ EXPORT_SYMBOL_GPL(mddev_suspend);
 
 void mddev_resume(struct mddev *mddev)
 {
-	/* entred the memalloc scope from mddev_suspend() */
-	memalloc_noio_restore(mddev->noio_flag);
 	lockdep_assert_held(&mddev->reconfig_mutex);
 	if (--mddev->suspended)
 		return;
+
+	/* entred the memalloc scope from mddev_suspend() */
+	memalloc_noio_restore(mddev->noio_flag);
+
 	percpu_ref_resurrect(&mddev->active_io);
 	wake_up(&mddev->sb_wait);
 	mddev->pers->quiesce(mddev, 0);
Signature · 1 line
2.40.1
author maintainer
#280 lore raw

PATCH 278/600 md/raid10: factor out dereference_rdev_and_rrdev()

In reply to Greg Kroah-Hartman

6.1-stable review patch. If anyone has any objections, please let me know.

------------------

From: Li Nan <[email protected]>

[ Upstream commit b99f8fd2d91eb734f13098aa1cf337edaca454b7 ]

Factor out a helper to get 'rdev' and 'replacement' from config->mirrors. Just to make code cleaner and prepare to fix the bug of io loss while 'replacement' replace 'rdev'.

There is no functional change.

Stable-dep-of: 673643490b9a ("md/raid10: use dereference_rdev_and_rrdev() to get devices")

---
 drivers/md/raid10.c | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)
drivers/md/raid10.c +20 -9
index d2098fcd6a270..49bb79f48f362 100644
@@ -1317,6 +1317,25 @@ static void raid10_write_one_disk(struct mddev *mddev, struct r10bio *r10_bio,
 	}
 }
 
+static struct md_rdev *dereference_rdev_and_rrdev(struct raid10_info *mirror,
+						  struct md_rdev **prrdev)
+{
+	struct md_rdev *rdev, *rrdev;
+
+	rrdev = rcu_dereference(mirror->replacement);
+	/*
+	 * Read replacement first to prevent reading both rdev and
+	 * replacement as NULL during replacement replace rdev.
+	 */
+	smp_mb();
+	rdev = rcu_dereference(mirror->rdev);
+	if (rdev == rrdev)
+		rrdev = NULL;
+
+	*prrdev = rrdev;
+	return rdev;
+}
+
 static void wait_blocked_dev(struct mddev *mddev, struct r10bio *r10_bio)
 {
 	int i;
@@ -1460,15 +1479,7 @@ static void raid10_write_request(struct mddev *mddev, struct bio *bio,
 		int d = r10_bio->devs[i].devnum;
 		struct md_rdev *rdev, *rrdev;
 
-		rrdev = rcu_dereference(conf->mirrors[d].replacement);
-		/*
-		 * Read replacement first to prevent reading both rdev and
-		 * replacement as NULL during replacement replace rdev.
-		 */
-		smp_mb();
-		rdev = rcu_dereference(conf->mirrors[d].rdev);
-		if (rdev == rrdev)
-			rrdev = NULL;
+		rdev = dereference_rdev_and_rrdev(&conf->mirrors[d], &rrdev);
 		if (rdev && (test_bit(Faulty, &rdev->flags)))
 			rdev = NULL;
 		if (rrdev && (test_bit(Faulty, &rrdev->flags)))
Signature · 1 line
2.40.1