Skip to contentSkip to conversation

Turris Omnia LED driver changes

PATCH Superseded Marek Behún 4 participants 19 messages Sep 13, 2024 – Oct 9, 2024

Subsystems (4)

v3 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Marek Behún

author maintainer
#0 lore raw

v3 cover Turris Omnia LED driver changes

Hello Lee,

this is v3 of Turris Omnia LED driver changes.
v1 and v2 can be found at
https://lore.kernel.org/linux-leds/[email protected]/
https://lore.kernel.org/linux-leds/[email protected]/

This series is for 6.12 (alternatively 6.13), but it depends on changes that have been merged to 6.11-rc3. Your for-leds-next branch is based on 6.11-rc1, so it won't apply there.

Changes since v2:
- added interrupts property description to device-tree binding to fix the device-tree binding check reported by Rob's bot (new patch 05/11 in this series)
- dropped the patch that converted to 100 column wrapping, as suggested by Arnd
- took Andy's suggestions into the patch that converts to dev_err_probe()

Marek

Marek Behún (11):
turris-omnia-mcu-interface.h: Move command execution function to
global header
leds: turris-omnia: Use command execution functions from the MCU
driver
turris-omnia-mcu-interface.h: Add LED commands related definitions to
global header
leds: turris-omnia: Use global header for MCU command definitions
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
platform: cznic: turris-omnia-mcu: Inform about missing LED panel
brightness change interrupt feature
leds: turris-omnia: Inform about missing LED gamma correction feature
in the MCU driver
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Use uppercase first letter in all comments
ARM: dts: turris-omnia: Add global LED brightness change interrupt

 .../leds/cznic,turris-omnia-leds.yaml         |   8 +
 .../dts/marvell/armada-385-turris-omnia.dts   |   1 +
 drivers/leds/leds-turris-omnia.c              | 262 +++++++-----------
 .../platform/cznic/turris-omnia-mcu-base.c    |   3 +
 drivers/platform/cznic/turris-omnia-mcu.h     | 130 ---------
 include/linux/turris-omnia-mcu-interface.h    | 148 +++++++++-
 6 files changed, 258 insertions(+), 294 deletions(-)
Signature · 1 line
2.44.2
author maintainer
#1 lore raw

PATCH v3 1/11 turris-omnia-mcu-interface.h: Move command execution function to global header

Move the command execution functions from the turris-omnia-mcu platform driver private header to the global turris-omnia-mcu-interface.h header, so that they can be used by the LED driver.

---
 .../platform/cznic/turris-omnia-mcu-base.c    |   1 +
 drivers/platform/cznic/turris-omnia-mcu.h     | 130 -----------------
 include/linux/turris-omnia-mcu-interface.h    | 136 +++++++++++++++++-
 3 files changed, 136 insertions(+), 131 deletions(-)
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
index 58f9afae2867..bb871226e357 100644
@@ -52,6 +52,7 @@ int omnia_cmd_write_read(const struct i2c_client *client,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omnia_cmd_write_read);
 
 static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
 				  char version[static OMNIA_FW_VERSION_HEX_LEN])
drivers/platform/cznic/turris-omnia-mcu.h +0 -130

148 lines not on this page · raw message

include/linux/turris-omnia-mcu-interface.h +135 -1

146 lines not on this page · raw message

Signature · 1 line
2.44.2
author maintainer
#2 lore raw

PATCH v3 2/11 leds: turris-omnia: Use command execution functions from the MCU driver

In reply to Marek Behún

Use the MCU command execution functions from the MCU driver instead of the ad-hoc implementation in the LED driver. This allows as to drop the LED driver implementation, which is a duplicate.

---
 drivers/leds/leds-turris-omnia.c | 110 ++++++++-----------------------
 1 file changed, 29 insertions(+), 81 deletions(-)
drivers/leds/leds-turris-omnia.c +29 -81
index 4cff8c4b020c..0b71848930dd 100644
@@ -2,7 +2,7 @@
 /*
  * CZ.NIC's Turris Omnia LEDs driver
  *
- * 2020, 2023 by Marek Behún <[email protected]>
+ * 2020, 2023, 2024 by Marek Behún <[email protected]>
  */
 
 #include <linux/i2c.h>
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/turris-omnia-mcu-interface.h>
 #include "leds.h"
 
 #define OMNIA_BOARD_LEDS	12
@@ -57,66 +58,21 @@ struct omnia_leds {
 	struct omnia_led leds[];
 };
 
-static int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd, u8 val)
+static int omnia_cmd_set_color(const struct i2c_client *client, u8 led, u8 r, u8 g, u8 b)
 {
-	u8 buf[2] = { cmd, val };
-	int ret;
-
-	ret = i2c_master_send(client, buf, sizeof(buf));
+	u8 buf[5] = { CMD_LED_COLOR, led, r, g, b };
 
-	return ret < 0 ? ret : 0;
-}
-
-static int omnia_cmd_read_raw(struct i2c_adapter *adapter, u8 addr, u8 cmd,
-			      void *reply, size_t len)
-{
-	struct i2c_msg msgs[2];
-	int ret;
-
-	msgs[0].addr = addr;
-	msgs[0].flags = 0;
-	msgs[0].len = 1;
-	msgs[0].buf = &cmd;
-	msgs[1].addr = addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = len;
-	msgs[1].buf = reply;
-
-	ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
-	if (likely(ret == ARRAY_SIZE(msgs)))
-		return 0;
-	else if (ret < 0)
-		return ret;
-	else
-		return -EIO;
-}
-
-static int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
-{
-	u8 reply;
-	int err;
-
-	err = omnia_cmd_read_raw(client->adapter, client->addr, cmd, &reply, 1);
-	if (err)
-		return err;
-
-	return reply;
+	return omnia_cmd_write(client, buf, sizeof(buf));
 }
 
 static int omnia_led_send_color_cmd(const struct i2c_client *client,
 				    struct omnia_led *led)
 {
-	char cmd[5];
 	int ret;
 
-	cmd[0] = CMD_LED_COLOR;
-	cmd[1] = led->reg;
-	cmd[2] = led->subled_info[0].brightness;
-	cmd[3] = led->subled_info[1].brightness;
-	cmd[4] = led->subled_info[2].brightness;
-
 	/* Send the color change command */
-	ret = i2c_master_send(client, cmd, 5);
+	ret = omnia_cmd_set_color(client, led->reg, led->subled_info[0].brightness,
+				  led->subled_info[1].brightness, led->subled_info[2].brightness);
 	if (ret < 0)
 		return ret;
 
@@ -352,14 +308,14 @@ static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
 			       char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	int ret;
-
-	ret = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS);
+	u8 reply;
+	int err;
 
-	if (ret < 0)
-		return ret;
+	err = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS, &reply);
+	if (err < 0)
+		return err;
 
-	return sysfs_emit(buf, "%d\n", ret);
+	return sysfs_emit(buf, "%d\n", reply);
 }
 
 static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
@@ -386,17 +342,16 @@ static ssize_t gamma_correction_show(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct omnia_leds *leds = i2c_get_clientdata(client);
-	int ret;
+	u8 reply = 0;
+	int err;
 
 	if (leds->has_gamma_correction) {
-		ret = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION);
-		if (ret < 0)
-			return ret;
-	} else {
-		ret = 0;
+		err = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION, &reply);
+		if (err < 0)
+			return err;
 	}
 
-	return sysfs_emit(buf, "%d\n", !!ret);
+	return sysfs_emit(buf, "%d\n", !!reply);
 }
 
 static ssize_t gamma_correction_store(struct device *dev,
@@ -429,24 +384,26 @@ ATTRIBUTE_GROUPS(omnia_led_controller);
 
 static int omnia_mcu_get_features(const struct i2c_client *client)
 {
+	struct i2c_client mcu_client = *client;
 	u16 reply;
 	int err;
 
-	err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
-				 CMD_GET_STATUS_WORD, &reply, sizeof(reply));
+	/* We have to read features from different I2C address */
+	mcu_client.addr = OMNIA_MCU_I2C_ADDR;
+
+	err = omnia_cmd_read_u16(&mcu_client, CMD_GET_STATUS_WORD, &reply);
 	if (err)
 		return err;
 
 	/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
-	if (!(le16_to_cpu(reply) & STS_FEATURES_SUPPORTED))
+	if (!(reply & STS_FEATURES_SUPPORTED))
 		return 0;
 
-	err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
-				 CMD_GET_FEATURES, &reply, sizeof(reply));
+	err = omnia_cmd_read_u16(&mcu_client, CMD_GET_FEATURES, &reply);
 	if (err)
 		return err;
 
-	return le16_to_cpu(reply);
+	return reply;
 }
 
 static int omnia_leds_probe(struct i2c_client *client)
@@ -510,20 +467,11 @@ static int omnia_leds_probe(struct i2c_client *client)
 
 static void omnia_leds_remove(struct i2c_client *client)
 {
-	u8 buf[5];
-
 	/* put all LEDs into default (HW triggered) mode */
-	omnia_cmd_write_u8(client, CMD_LED_MODE,
-			   CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
+	omnia_cmd_write_u8(client, CMD_LED_MODE, CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
 	/* set all LEDs color to [255, 255, 255] */
-	buf[0] = CMD_LED_COLOR;
-	buf[1] = OMNIA_BOARD_LEDS;
-	buf[2] = 255;
-	buf[3] = 255;
-	buf[4] = 255;
-
-	i2c_master_send(client, buf, 5);
+	omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);
 }
 
 static const struct of_device_id of_omnia_leds_match[] = {
Signature · 1 line
2.44.2
#3 lore raw

Re: [PATCH leds v3 02/11] leds: turris-omnia: Use command execution functions from the MCU driver

kernel test robot noticed the following build errors:

Hi Marek,

kernel test robot noticed the following build errors:

[auto build test ERROR on next-20240913]
[also build test ERROR on v6.11-rc7]
[cannot apply to lee-leds/for-leds-next robh/for-next linus/master v6.11-rc7 v6.11-rc6 v6.11-rc5] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Marek-Beh-n/turris-omnia-mcu-interface-h-Move-command-execution-function-to-global-header/20240913-203320
base:   next-20240913
patch link:    https://lore.kernel.org/r/20240913123103.21226-3-kabel%40kernel.org
patch subject: [PATCH leds v3 02/11] leds: turris-omnia: Use command execution functions from the MCU driver
config: arc-randconfig-001-20240914 (https://download.01.org/0day-ci/archive/20240914/[email protected]/config)
compiler: arc-elf-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240914/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

arc-elf-ld: drivers/leds/leds-turris-omnia.o: in function `gamma_correction_show':

>> leds-turris-omnia.c:(.text+0x26): undefined reference to `omnia_cmd_write_read'
>> arc-elf-ld: leds-turris-omnia.c:(.text+0x26): undefined reference to `omnia_cmd_write_read'

arc-elf-ld: drivers/leds/leds-turris-omnia.o: in function `brightness_show':
leds-turris-omnia.c:(.text+0x98): undefined reference to `omnia_cmd_write_read'
arc-elf-ld: leds-turris-omnia.c:(.text+0x98): undefined reference to `omnia_cmd_write_read'
arc-elf-ld: drivers/leds/leds-turris-omnia.o: in function `omnia_led_send_color_cmd':
leds-turris-omnia.c:(.text+0xfc): undefined reference to `omnia_cmd_write_read'
arc-elf-ld: drivers/leds/leds-turris-omnia.o:leds-turris-omnia.c:(.text+0xfc): more undefined references to `omnia_cmd_write_read' follow

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#4 lore raw

Re: [PATCH leds v3 02/11] leds: turris-omnia: Use command execution functions from the MCU driver

In reply to Marek Behún
kernel test robot noticed the following build errors:

Hi Marek,

kernel test robot noticed the following build errors:

[auto build test ERROR on next-20240913]
[also build test ERROR on v6.11-rc7]
[cannot apply to lee-leds/for-leds-next robh/for-next linus/master v6.11-rc7 v6.11-rc6 v6.11-rc5] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Marek-Beh-n/turris-omnia-mcu-interface-h-Move-command-execution-function-to-global-header/20240913-203320
base:   next-20240913
patch link:    https://lore.kernel.org/r/20240913123103.21226-3-kabel%40kernel.org
patch subject: [PATCH leds v3 02/11] leds: turris-omnia: Use command execution functions from the MCU driver
config: i386-buildonly-randconfig-002-20240914 (https://download.01.org/0day-ci/archive/20240914/[email protected]/config)
compiler: clang version 18.1.8 (https://github.com/llvm/llvm-project 3b5b5c1ec4a3095ab096dd780e84d7ab81f3d7ff)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240914/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>, old ones prefixed by <<):

>> ERROR: modpost: "omnia_cmd_write_read" [drivers/leds/leds-turris-omnia.ko] undefined!
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
author maintainer
#5 lore raw

PATCH v3 3/11 turris-omnia-mcu-interface.h: Add LED commands related definitions to global header

In reply to Marek Behún

Add definitions for contents of the OMNIA_CMD_LED_MODE and OMNIA_CMD_LED_STATE commands to the global turris-omnia-mcu-interface.h header.

---
 include/linux/turris-omnia-mcu-interface.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)
include/linux/turris-omnia-mcu-interface.h +12 -0
index b587549141cb..bac275b0ae42 100644
@@ -239,6 +239,18 @@ enum omnia_int_e {
 	OMNIA_INT_LAN5_LED1		= BIT(31),
 };
 
+enum omnia_cmd_led_mode_e {
+	OMNIA_CMD_LED_MODE_LED_MASK	= GENMASK(3, 0),
+#define OMNIA_CMD_LED_MODE_LED(_l)	FIELD_PREP(OMNIA_CMD_LED_MODE_LED_MASK, _l)
+	OMNIA_CMD_LED_MODE_USER		= BIT(4),
+};
+
+enum omnia_cmd_led_state_e {
+	OMNIA_CMD_LED_STATE_LED_MASK	= GENMASK(3, 0),
+#define OMNIA_CMD_LED_STATE_LED(_l)	FIELD_PREP(OMNIA_CMD_LED_STATE_LED_MASK, _l)
+	OMNIA_CMD_LED_STATE_ON		= BIT(4),
+};
+
 enum omnia_cmd_poweroff_e {
 	OMNIA_CMD_POWER_OFF_POWERON_BUTTON	= BIT(0),
 	OMNIA_CMD_POWER_OFF_MAGIC		= 0xdead,
Signature · 1 line
2.44.2
author maintainer
#6 lore raw

PATCH v3 4/11 leds: turris-omnia: Use global header for MCU command definitions

In reply to Marek Behún

The global turris-omnia-mcu-interface.h header file contains the definitions for MCU commands. Drop the driver-internal definitions and use the global ones.

---
 drivers/leds/leds-turris-omnia.c | 71 +++++++++++---------------------
 1 file changed, 23 insertions(+), 48 deletions(-)
drivers/leds/leds-turris-omnia.c +23 -48
index 0b71848930dd..82cf58fbe946 100644
@@ -16,30 +16,8 @@
 #define OMNIA_BOARD_LEDS	12
 #define OMNIA_LED_NUM_CHANNELS	3
 
-/* MCU controller commands at I2C address 0x2a */
-#define OMNIA_MCU_I2C_ADDR		0x2a
-
-#define CMD_GET_STATUS_WORD		0x01
-#define STS_FEATURES_SUPPORTED		BIT(2)
-
-#define CMD_GET_FEATURES		0x10
-#define FEAT_LED_GAMMA_CORRECTION	BIT(5)
-
-/* LED controller commands at I2C address 0x2b */
-#define CMD_LED_MODE			0x03
-#define CMD_LED_MODE_LED(l)		((l) & 0x0f)
-#define CMD_LED_MODE_USER		0x10
-
-#define CMD_LED_STATE			0x04
-#define CMD_LED_STATE_LED(l)		((l) & 0x0f)
-#define CMD_LED_STATE_ON		0x10
-
-#define CMD_LED_COLOR			0x05
-#define CMD_LED_SET_BRIGHTNESS		0x07
-#define CMD_LED_GET_BRIGHTNESS		0x08
-
-#define CMD_SET_GAMMA_CORRECTION	0x30
-#define CMD_GET_GAMMA_CORRECTION	0x31
+/* MCU controller I2C address 0x2a, needed for detecting MCU features */
+#define OMNIA_MCU_I2C_ADDR	0x2a
 
 struct omnia_led {
 	struct led_classdev_mc mc_cdev;
@@ -60,7 +38,7 @@ struct omnia_leds {
 
 static int omnia_cmd_set_color(const struct i2c_client *client, u8 led, u8 r, u8 g, u8 b)
 {
-	u8 buf[5] = { CMD_LED_COLOR, led, r, g, b };
+	u8 buf[5] = { OMNIA_CMD_LED_COLOR, led, r, g, b };
 
 	return omnia_cmd_write(client, buf, sizeof(buf));
 }
@@ -127,12 +105,12 @@ static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
 	 * is not being blinked by HW.
 	 */
 	if (!err && !led->hwtrig && !brightness != !led->on) {
-		u8 state = CMD_LED_STATE_LED(led->reg);
+		u8 state = OMNIA_CMD_LED_STATE_LED(led->reg);
 
 		if (brightness)
-			state |= CMD_LED_STATE_ON;
+			state |= OMNIA_CMD_LED_STATE_ON;
 
-		err = omnia_cmd_write_u8(leds->client, CMD_LED_STATE, state);
+		err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_STATE, state);
 		if (!err)
 			led->on = !!brightness;
 	}
@@ -167,8 +145,8 @@ static int omnia_hwtrig_activate(struct led_classdev *cdev)
 
 	if (!err) {
 		/* Put the LED into MCU controlled mode */
-		err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-					 CMD_LED_MODE_LED(led->reg));
+		err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_MODE,
+					 OMNIA_CMD_LED_MODE_LED(led->reg));
 		if (!err)
 			led->hwtrig = true;
 	}
@@ -189,9 +167,8 @@ static void omnia_hwtrig_deactivate(struct led_classdev *cdev)
 	led->hwtrig = false;
 
 	/* Put the LED into software mode */
-	err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-				 CMD_LED_MODE_LED(led->reg) |
-				 CMD_LED_MODE_USER);
+	err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_MODE,
+				 OMNIA_CMD_LED_MODE_LED(led->reg) | OMNIA_CMD_LED_MODE_USER);
 
 	mutex_unlock(&leds->lock);
 
@@ -258,9 +235,8 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	cdev->default_trigger = omnia_hw_trigger.name;
 
 	/* put the LED into software mode */
-	ret = omnia_cmd_write_u8(client, CMD_LED_MODE,
-				 CMD_LED_MODE_LED(led->reg) |
-				 CMD_LED_MODE_USER);
+	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
+							     OMNIA_CMD_LED_MODE_USER);
 	if (ret) {
 		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
 			ret);
@@ -268,8 +244,7 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	}
 
 	/* disable the LED */
-	ret = omnia_cmd_write_u8(client, CMD_LED_STATE,
-				 CMD_LED_STATE_LED(led->reg));
+	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
 	if (ret) {
 		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
 		return ret;
@@ -311,7 +286,7 @@ static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
 	u8 reply;
 	int err;
 
-	err = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS, &reply);
+	err = omnia_cmd_read_u8(client, OMNIA_CMD_GET_BRIGHTNESS, &reply);
 	if (err < 0)
 		return err;
 
@@ -331,7 +306,7 @@ static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
 	if (brightness > 100)
 		return -EINVAL;
 
-	err = omnia_cmd_write_u8(client, CMD_LED_SET_BRIGHTNESS, brightness);
+	err = omnia_cmd_write_u8(client, OMNIA_CMD_SET_BRIGHTNESS, brightness);
 
 	return err ?: count;
 }
@@ -346,7 +321,7 @@ static ssize_t gamma_correction_show(struct device *dev,
 	int err;
 
 	if (leds->has_gamma_correction) {
-		err = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION, &reply);
+		err = omnia_cmd_read_u8(client, OMNIA_CMD_GET_GAMMA_CORRECTION, &reply);
 		if (err < 0)
 			return err;
 	}
@@ -369,7 +344,7 @@ static ssize_t gamma_correction_store(struct device *dev,
 	if (kstrtobool(buf, &val) < 0)
 		return -EINVAL;
 
-	err = omnia_cmd_write_u8(client, CMD_SET_GAMMA_CORRECTION, val);
+	err = omnia_cmd_write_u8(client, OMNIA_CMD_SET_GAMMA_CORRECTION, val);
 
 	return err ?: count;
 }
@@ -391,15 +366,15 @@ static int omnia_mcu_get_features(const struct i2c_client *client)
 	/* We have to read features from different I2C address */
 	mcu_client.addr = OMNIA_MCU_I2C_ADDR;
 
-	err = omnia_cmd_read_u16(&mcu_client, CMD_GET_STATUS_WORD, &reply);
+	err = omnia_cmd_read_u16(&mcu_client, OMNIA_CMD_GET_STATUS_WORD, &reply);
 	if (err)
 		return err;
 
-	/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
-	if (!(reply & STS_FEATURES_SUPPORTED))
+	/* Check whether MCU firmware supports the OMNIA_CMD_GET_FEAUTRES command */
+	if (!(reply & OMNIA_STS_FEATURES_SUPPORTED))
 		return 0;
 
-	err = omnia_cmd_read_u16(&mcu_client, CMD_GET_FEATURES, &reply);
+	err = omnia_cmd_read_u16(&mcu_client, OMNIA_CMD_GET_FEATURES, &reply);
 	if (err)
 		return err;
 
@@ -437,7 +412,7 @@ static int omnia_leds_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	leds->has_gamma_correction = ret & FEAT_LED_GAMMA_CORRECTION;
+	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
 	if (!leds->has_gamma_correction) {
 		dev_info(dev,
 			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
@@ -468,7 +443,7 @@ static int omnia_leds_probe(struct i2c_client *client)
 static void omnia_leds_remove(struct i2c_client *client)
 {
 	/* put all LEDs into default (HW triggered) mode */
-	omnia_cmd_write_u8(client, CMD_LED_MODE, CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
+	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
 	/* set all LEDs color to [255, 255, 255] */
 	omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);
Signature · 1 line
2.44.2
author maintainer
#7 lore raw

PATCH v3 5/11 dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property

In reply to Marek Behún

Extend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt.

---
 .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +8 -0
index 34ef5215c150..f52f6304c79e 100644
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -56,6 +62,7 @@ additionalProperties: false
 examples:
   - |
 
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -65,6 +72,7 @@ examples:
         led-controller@2b {
             compatible = "cznic,turris-omnia-leds";
             reg = <0x2b>;
+            interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
             #address-cells = <1>;
             #size-cells = <0>;
 
Signature · 1 line
2.44.2
#8 lore raw

Re: [PATCH leds v3 05/11] dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property

Quoted 13 lines · Marek Behún

Extend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt.

---
 .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +0 -0
index 34ef5215c150..f52f6304c79e 100644

Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml properties: · line 29

Quoted 7 lines
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +4 -0
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.

This "front button press" concerns me that you just hooked here gpio-key. Are you sure that this is the physical interrupt line going to this device?

Best regards,
Krzysztof

author maintainer
#9 lore raw

Re: [PATCH leds v3 05/11] dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property

Quoted 17 lines · Krzysztof Kozlowski
Quoted 16 lines · Marek Behún

Extend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt.

---
 .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +0 -0
index 34ef5215c150..f52f6304c79e 100644
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
Quoted 8 lines

Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml properties: · line 29

Quoted 4 lines
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +4 -0
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.

This "front button press" concerns me that you just hooked here gpio-key. Are you sure that this is the physical interrupt line going to this device?

No no no, that is a different interrupt from the gpio-key.

The button can be configure in two modes:

- it can act like a GPIO to the CPU, forwarding press and release events via the GPIO chip (so button press it is handled by CPU)
- can be set with

      echo cpu >/sys/bus/i2c/devices/1-002a/front_button_mode

- pressing it will generate the INT_BUTTON_PRESSED interrupt from the MCU

- it can change LED panel brightness (so button press is handled by MCU)
- this is the default mode, configured after boot
- can be set with

      echo mcu >/sys/bus/i2c/devices/1-002a/front_button_mode

- pressing it will generate the INT_BRIGHTNESS_CHANGED interrupt

The INT_BUTTON_PRESSED and INT_BRIGHTNESS_CHANGED interrupt semantically different (and also literally, they are at different bits). See
https://gitlab.nic.cz/turris/hw/omnia_hw_ctrl/-/blob/master/src/drivers/i2c_iface.h?ref_type=heads#L289-L321

Marek

#10 lore raw

Re: [PATCH leds v3 05/11] dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property

Quoted 41 lines · Marek Behún
Quoted 17 lines · Krzysztof Kozlowski
Quoted 16 lines · Marek Behún

Extend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt.

---
 .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +0 -0
index 34ef5215c150..f52f6304c79e 100644
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
Quoted 8 lines

Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml properties: · line 29

Quoted 4 lines
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +4 -0
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.

This "front button press" concerns me that you just hooked here gpio-key. Are you sure that this is the physical interrupt line going to this device?

No no no, that is a different interrupt from the gpio-key.

The button can be configure in two modes:

- it can act like a GPIO to the CPU, forwarding press and release events via the GPIO chip (so button press it is handled by CPU)
- can be set with

      echo cpu >/sys/bus/i2c/devices/1-002a/front_button_mode

- pressing it will generate the INT_BUTTON_PRESSED interrupt from the MCU

- it can change LED panel brightness (so button press is handled by MCU)
- this is the default mode, configured after boot
- can be set with

Quoted 6 lines
      echo mcu >/sys/bus/i2c/devices/1-002a/front_button_mode

- pressing it will generate the INT_BRIGHTNESS_CHANGED interrupt

The INT_BUTTON_PRESSED and INT_BRIGHTNESS_CHANGED interrupt semantically different (and also literally, they are at different bits). See
https://gitlab.nic.cz/turris/hw/omnia_hw_ctrl/-/blob/master/src/drivers/i2c_iface.h?ref_type=heads#L289-L321

That's fine, thanks for the explanation.

Best regards,
Krzysztof

author maintainer
#12 lore raw

PATCH v3 6/11 leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change

In reply to Marek Behún

Recall that on Turris Omnia, the LED controller has a global brightness property, which allows the user to make the front LED panel dimmer.

There is also a button on the front panel, which by default is configured so that pressing it changes the global brightness to a lower value (unless it is at 0%, in which case pressing the button changes the global brightness to 100%).

Newer versions of the MCU firmware support informing the SOC that the brightness was changed by button press event via an interrupt.

Now that we have the turris-omnia-mcu driver, which adds support for MCU interrupts, add the ability to inform the userspace (via a sysfs notification) that the global brightness was changed.

---
 drivers/leds/leds-turris-omnia.c | 37 ++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
drivers/leds/leds-turris-omnia.c +37 -0
index 82cf58fbe946..a87cdb58e476 100644
@@ -33,6 +33,7 @@ struct omnia_leds {
 	struct i2c_client *client;
 	struct mutex lock;
 	bool has_gamma_correction;
+	struct kernfs_node *brightness_kn;
 	struct omnia_led leds[];
 };
 
@@ -357,6 +358,21 @@ static struct attribute *omnia_led_controller_attrs[] = {
 };
 ATTRIBUTE_GROUPS(omnia_led_controller);
 
+static irqreturn_t omnia_brightness_changed_handler(int irq, void *dev_id)
+{
+	struct omnia_leds *leds = dev_id;
+
+	if (unlikely(!leds->brightness_kn)) {
+		leds->brightness_kn = sysfs_get_dirent(leds->client->dev.kobj.sd, "brightness");
+		if (!leds->brightness_kn)
+			return IRQ_NONE;
+	}
+
+	sysfs_notify_dirent(leds->brightness_kn);
+
+	return IRQ_HANDLED;
+}
+
 static int omnia_mcu_get_features(const struct i2c_client *client)
 {
 	struct i2c_client mcu_client = *client;
@@ -420,6 +436,14 @@ static int omnia_leds_probe(struct i2c_client *client)
 			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
 	}
 
+	if (ret & OMNIA_FEAT_BRIGHTNESS_INT) {
+		ret = devm_request_any_context_irq(dev, client->irq,
+						   omnia_brightness_changed_handler, IRQF_ONESHOT,
+						   "leds-turris-omnia", leds);
+		if (ret <= 0)
+			return dev_err_probe(dev, ret ?: -ENXIO, "Cannot request brightness IRQ\n");
+	}
+
 	mutex_init(&leds->lock);
 
 	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
@@ -442,6 +466,19 @@ static int omnia_leds_probe(struct i2c_client *client)
 
 static void omnia_leds_remove(struct i2c_client *client)
 {
+	struct omnia_leds *leds = i2c_get_clientdata(client);
+
+	/*
+	 * We need to free the brightness IRQ here, before putting away the brightness sysfs node.
+	 * Otherwise devres would free the interrupt only after the sysfs node is removed, and if
+	 * an interrupt occurred between those two events, it would use a removed sysfs node.
+	 */
+	devm_free_irq(&client->dev, client->irq, leds);
+
+	/* Now put away the sysfs node we got the first time the interrupt handler was called */
+	if (leds->brightness_kn)
+		sysfs_put(leds->brightness_kn);
+
 	/* put all LEDs into default (HW triggered) mode */
 	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
Signature · 1 line
2.44.2
maintainer
#13 lore raw

Re: [PATCH leds v3 06/11] leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change

Quoted 25 lines · Marek Behún

Recall that on Turris Omnia, the LED controller has a global brightness property, which allows the user to make the front LED panel dimmer.

There is also a button on the front panel, which by default is configured so that pressing it changes the global brightness to a lower value (unless it is at 0%, in which case pressing the button changes the global brightness to 100%).

Newer versions of the MCU firmware support informing the SOC that the brightness was changed by button press event via an interrupt.

Now that we have the turris-omnia-mcu driver, which adds support for MCU interrupts, add the ability to inform the userspace (via a sysfs notification) that the global brightness was changed.

---
 drivers/leds/leds-turris-omnia.c | 37 ++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
drivers/leds/leds-turris-omnia.c +0 -0
index 82cf58fbe946..a87cdb58e476 100644

drivers/leds/leds-turris-omnia.c struct omnia_leds { · line 36

Quoted 4 lines
drivers/leds/leds-turris-omnia.c +1 -0
@@ -33,6 +33,7 @@ struct omnia_leds {
 	struct i2c_client *client;
 	struct mutex lock;
 	bool has_gamma_correction;
+	struct kernfs_node *brightness_kn;

Variable nomenclature should be self documenting.

What is kn? Please improve this.

drivers/leds/leds-turris-omnia.c static struct attribute *omnia_led_controller_attrs[] = { · line 361

Quoted 8 lines
drivers/leds/leds-turris-omnia.c +1 -0
 	struct omnia_led leds[];
 };
 
@@ -357,6 +358,21 @@ static struct attribute *omnia_led_controller_attrs[] = {
 };
 ATTRIBUTE_GROUPS(omnia_led_controller);
 
+static irqreturn_t omnia_brightness_changed_handler(int irq, void *dev_id)

Why dev_id? This appears to be driver data. ddata sounds more applicable.

drivers/leds/leds-turris-omnia.c static struct attribute *omnia_led_controller_attrs[] = { · line 366

Quoted 5 lines
drivers/leds/leds-turris-omnia.c +5 -0
+{
+	struct omnia_leds *leds = dev_id;
+
+	if (unlikely(!leds->brightness_kn)) {
+		leds->brightness_kn = sysfs_get_dirent(leds->client->dev.kobj.sd, "brightness");

NACK. This will sleep in IRQ context.

Quoted 50 lines
drivers/leds/leds-turris-omnia.c +30 -0
+		if (!leds->brightness_kn)
+			return IRQ_NONE;
+	}
+
+	sysfs_notify_dirent(leds->brightness_kn);
+
+	return IRQ_HANDLED;
+}
+
 static int omnia_mcu_get_features(const struct i2c_client *client)
 {
 	struct i2c_client mcu_client = *client;
@@ -420,6 +436,14 @@ static int omnia_leds_probe(struct i2c_client *client)
 			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
 	}
 
+	if (ret & OMNIA_FEAT_BRIGHTNESS_INT) {
+		ret = devm_request_any_context_irq(dev, client->irq,
+						   omnia_brightness_changed_handler, IRQF_ONESHOT,
+						   "leds-turris-omnia", leds);
+		if (ret <= 0)
+			return dev_err_probe(dev, ret ?: -ENXIO, "Cannot request brightness IRQ\n");
+	}
+
 	mutex_init(&leds->lock);
 
 	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
@@ -442,6 +466,19 @@ static int omnia_leds_probe(struct i2c_client *client)
 
 static void omnia_leds_remove(struct i2c_client *client)
 {
+	struct omnia_leds *leds = i2c_get_clientdata(client);
+
+	/*
+	 * We need to free the brightness IRQ here, before putting away the brightness sysfs node.
+	 * Otherwise devres would free the interrupt only after the sysfs node is removed, and if
+	 * an interrupt occurred between those two events, it would use a removed sysfs node.
+	 */
+	devm_free_irq(&client->dev, client->irq, leds);
+
+	/* Now put away the sysfs node we got the first time the interrupt handler was called */
+	if (leds->brightness_kn)
+		sysfs_put(leds->brightness_kn);
+
 	/* put all LEDs into default (HW triggered) mode */
 	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
Signature · 1 line
2.44.2
Signature · 1 line
Lee Jones [李琼斯]
author maintainer
#14 lore raw

PATCH v3 7/11 platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature

In reply to Marek Behún

When reading MCU firmware features, check also for the LED panel brightness change interrupt feature, and suggest upgrading the firmware if it is missing.

---
 drivers/platform/cznic/turris-omnia-mcu-base.c | 1 +
 1 file changed, 1 insertion(+)
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
index bb871226e357..3bb4a3cfdb29 100644
@@ -258,6 +258,7 @@ static int omnia_mcu_read_features(struct omnia_mcu *mcu)
 		_DEF_FEAT(NEW_INT_API,		"new interrupt API"),
 		_DEF_FEAT(POWEROFF_WAKEUP,	"poweroff and wakeup"),
 		_DEF_FEAT(TRNG,			"true random number generator"),
+		_DEF_FEAT(BRIGHTNESS_INT,	"LED panel brightness change interrupt"),
 #undef _DEF_FEAT
 	};
 	struct i2c_client *client = mcu->client;
Signature · 1 line
2.44.2
author maintainer
#15 lore raw

PATCH v3 8/11 leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver

In reply to Marek Behún

If the LED gamma correction feature is missing in the MCU firmware, inform about this in the MCU firmware probe function instead of LED driver probe function, so that all the feature checks are in one place.

---
 drivers/leds/leds-turris-omnia.c               | 6 ------
 drivers/platform/cznic/turris-omnia-mcu-base.c | 1 +
 2 files changed, 1 insertion(+), 6 deletions(-)
drivers/leds/leds-turris-omnia.c +0 -6
index a87cdb58e476..570f7a69709c 100644
@@ -429,12 +429,6 @@ static int omnia_leds_probe(struct i2c_client *client)
 	}
 
 	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
-	if (!leds->has_gamma_correction) {
-		dev_info(dev,
-			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
-		dev_info(dev,
-			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
-	}
 
 	if (ret & OMNIA_FEAT_BRIGHTNESS_INT) {
 		ret = devm_request_any_context_irq(dev, client->irq,
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
index 3bb4a3cfdb29..770e680b96f9 100644
@@ -259,6 +259,7 @@ static int omnia_mcu_read_features(struct omnia_mcu *mcu)
 		_DEF_FEAT(POWEROFF_WAKEUP,	"poweroff and wakeup"),
 		_DEF_FEAT(TRNG,			"true random number generator"),
 		_DEF_FEAT(BRIGHTNESS_INT,	"LED panel brightness change interrupt"),
+		_DEF_FEAT(LED_GAMMA_CORRECTION,	"LED gamma correction"),
 #undef _DEF_FEAT
 	};
 	struct i2c_client *client = mcu->client;
Signature · 1 line
2.44.2
author maintainer
#16 lore raw

PATCH v3 9/11 leds: turris-omnia: Use dev_err_probe() where appropriate

In reply to Marek Behún

Use dev_err_probe() instead of dev_err() + separate return where appropriate.

---
 drivers/leds/leds-turris-omnia.c | 50 ++++++++++----------------------
 1 file changed, 16 insertions(+), 34 deletions(-)
drivers/leds/leds-turris-omnia.c +16 -34
index 570f7a69709c..298bdffd8c40 100644
@@ -238,33 +238,23 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	/* put the LED into software mode */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
 							     OMNIA_CMD_LED_MODE_USER);
-	if (ret) {
-		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
-			ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot set LED %pOF to software mode\n", np);
 
 	/* disable the LED */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
-	if (ret) {
-		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot set LED %pOF brightness\n", np);
 
 	/* Set initial color and cache it */
 	ret = omnia_led_send_color_cmd(client, led);
-	if (ret < 0) {
-		dev_err(dev, "Cannot set LED %pOF initial color: %i\n", np,
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot set LED %pOF initial color\n", np);
 
 	ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev,
 							&init_data);
-	if (ret < 0) {
-		dev_err(dev, "Cannot register LED %pOF: %i\n", np, ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot register LED %pOF\n", np);
 
 	return 1;
 }
@@ -406,13 +396,10 @@ static int omnia_leds_probe(struct i2c_client *client)
 	int ret, count;
 
 	count = of_get_available_child_count(np);
-	if (!count) {
-		dev_err(dev, "LEDs are not defined in device tree!\n");
-		return -ENODEV;
-	} else if (count > OMNIA_BOARD_LEDS) {
-		dev_err(dev, "Too many LEDs defined in device tree!\n");
-		return -EINVAL;
-	}
+	if (count == 0)
+		return dev_err_probe(dev, -ENODEV, "LEDs are not defined in device tree!\n");
+	if (count > OMNIA_BOARD_LEDS)
+		return dev_err_probe(dev, -EINVAL, "Too many LEDs defined in device tree!\n");
 
 	leds = devm_kzalloc(dev, struct_size(leds, leds, count), GFP_KERNEL);
 	if (!leds)
@@ -422,11 +409,8 @@ static int omnia_leds_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, leds);
 
 	ret = omnia_mcu_get_features(client);
-	if (ret < 0) {
-		dev_err(dev, "Cannot determine MCU supported features: %d\n",
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot determine MCU supported features\n");
 
 	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
 
@@ -441,10 +425,8 @@ static int omnia_leds_probe(struct i2c_client *client)
 	mutex_init(&leds->lock);
 
 	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
-	if (ret < 0) {
-		dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot register private LED trigger\n");
 
 	led = &leds->leds[0];
 	for_each_available_child_of_node_scoped(np, child) {
Signature · 1 line
2.44.2
author maintainer
#17 lore raw

PATCH v3 10/11 leds: turris-omnia: Use uppercase first letter in all comments

In reply to Marek Behún

Change first letter of 4 more comments to uppercase to make the driver comments uniform.

---
 drivers/leds/leds-turris-omnia.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/leds/leds-turris-omnia.c +4 -4
index 298bdffd8c40..d7e5f6de0f14 100644
@@ -235,13 +235,13 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	 */
 	cdev->default_trigger = omnia_hw_trigger.name;
 
-	/* put the LED into software mode */
+	/* Put the LED into software mode */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
 							     OMNIA_CMD_LED_MODE_USER);
 	if (ret)
 		return dev_err_probe(dev, ret, "Cannot set LED %pOF to software mode\n", np);
 
-	/* disable the LED */
+	/* Disable the LED */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
 	if (ret)
 		return dev_err_probe(dev, ret, "Cannot set LED %pOF brightness\n", np);
@@ -455,10 +455,10 @@ static void omnia_leds_remove(struct i2c_client *client)
 	if (leds->brightness_kn)
 		sysfs_put(leds->brightness_kn);
 
-	/* put all LEDs into default (HW triggered) mode */
+	/* Put all LEDs into default (HW triggered) mode */
 	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
-	/* set all LEDs color to [255, 255, 255] */
+	/* Set all LEDs color to [255, 255, 255] */
 	omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);
 }
 
Signature · 1 line
2.44.2
author maintainer
#18 lore raw

PATCH v3 11/11 ARM: dts: turris-omnia: Add global LED brightness change interrupt

In reply to Marek Behún

When global LED brightness is changed by pressing the front button on Turris Omnia, the MCU can produce an interrupt to the CPU. Add the description of this interrupt to the LED controller node.

---
 arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +1 -0
index 43202890c959..83fe00abd652 100644
@@ -251,6 +251,7 @@ mcu: system-controller@2a {
 			led-controller@2b {
 				compatible = "cznic,turris-omnia-leds";
 				reg = <0x2b>;
+				interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "okay";
Signature · 1 line
2.44.2