Turris Omnia LED driver changes
Subsystems (4)
Marek Behún
maintainerv4 cover Turris Omnia LED driver changes
Hello Lee,
this is v4 of Turris Omnia LED driver changes.
v1, v2 and v3 can be found at
https://lore.kernel.org/linux-leds/[email protected]/
https://lore.kernel.org/linux-leds/[email protected]/
https://lore.kernel.org/linux-leds/[email protected]/
Changes since v3:
- fixed kernel test robot warning for patch 2 by adding dependency to the TURRIS_OMNIA_MCU module
- added Krzysztof's Acked-by to patch 5
- added patch documenting driver private struct omnia_leds and struct omnia_led
- addressed your notes for patch 7 (6 in v3)
- added select TURRIS_OMNIA_MCU_GPIO to KConfig. The driver already depends on TURRIS_OMNIA_MCU, but for the global brightness changed interrupt it needs the GPIO functionality from the turris-omnia-mcu driver
Marek
Marek Behún (12):
turris-omnia-mcu-interface.h: Move command execution function to
global header
leds: turris-omnia: Use command execution functions from the MCU
driver
turris-omnia-mcu-interface.h: Add LED commands related definitions to
global header
leds: turris-omnia: Use global header for MCU command definitions
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
leds: turris-omnia: Document driver private structures
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
platform: cznic: turris-omnia-mcu: Inform about missing LED panel
brightness change interrupt feature
leds: turris-omnia: Inform about missing LED gamma correction feature
in the MCU driver
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Use uppercase first letter in all comments
ARM: dts: turris-omnia: Add global LED brightness change interrupt
.../leds/cznic,turris-omnia-leds.yaml | 8 + .../dts/marvell/armada-385-turris-omnia.dts | 1 + drivers/leds/Kconfig | 2 + drivers/leds/leds-turris-omnia.c | 291 ++++++++---------- .../platform/cznic/turris-omnia-mcu-base.c | 3 + drivers/platform/cznic/turris-omnia-mcu.h | 130 -------- include/linux/turris-omnia-mcu-interface.h | 148 ++++++++- 7 files changed, 288 insertions(+), 295 deletions(-)
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 1/12 turris-omnia-mcu-interface.h: Move command execution function to global header
Move the command execution functions from the turris-omnia-mcu platform driver private header to the global turris-omnia-mcu-interface.h header, so that they can be used by the LED driver.
--- .../platform/cznic/turris-omnia-mcu-base.c | 1 + drivers/platform/cznic/turris-omnia-mcu.h | 130 ----------------- include/linux/turris-omnia-mcu-interface.h | 136 +++++++++++++++++- 3 files changed, 136 insertions(+), 131 deletions(-)
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
@@ -52,6 +52,7 @@ int omnia_cmd_write_read(const struct i2c_client *client,return 0 ; } +EXPORT_SYMBOL_GPL (omnia_cmd_write_read);static int omnia_get_version_hash (struct omnia_mcu *mcu,bool bootloader,char version[static OMNIA_FW_VERSION_HEX_LEN ])
drivers/platform/cznic/turris-omnia-mcu.h +0 -130
148 lines not on this page · raw message
include/linux/turris-omnia-mcu-interface.h +135 -1
146 lines not on this page · raw message
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 2/12 leds: turris-omnia: Use command execution functions from the MCU driver
In reply to Marek BehúnUse the MCU command execution functions from the MCU driver instead of the ad-hoc implementation in the LED driver. This allows as to drop the LED driver implementation, which is a duplicate.
--- drivers/leds/Kconfig | 1 + drivers/leds/leds-turris-omnia.c | 110 ++++++++----------------------- 2 files changed, 30 insertions(+), 81 deletions(-)
drivers/leds/Kconfig +1 -0
@@ -217,6 +217,7 @@ config LEDS_TURRIS_OMNIA depends on I2C depends on MACH_ARMADA_38X || COMPILE_TEST depends on OF + depends on TURRIS_OMNIA_MCU select LEDS_TRIGGERS help This option enables basic support for the LEDs found on the front
drivers/leds/leds-turris-omnia.c +29 -81
183 lines not on this page · raw message
Signature · 1 line
2.45.2
kernel test robot
build botRe: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver
kernel test robot noticed the following build warnings:
Hi Marek,
kernel test robot noticed the following build warnings:
[auto build test WARNING on linus/master]
[also build test WARNING on v6.12-rc5]
[cannot apply to lee-leds/for-leds-next robh/for-next next-20241030] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Marek-Beh-n/turris-omnia-mcu-interface-h-Move-command-execution-function-to-global-header/20241029-215858 base: linus/master patch link: https://lore.kernel.org/r/20241029135621.12546-3-kabel%40kernel.org patch subject: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver config: riscv-allmodconfig (https://download.01.org/0day-ci/archive/20241031/[email protected]/config) compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 639a7ac648f1e50ccd2556e17d401c04f9cce625) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241031/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
In file included from drivers/leds/leds-turris-omnia.c:8:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:22:
In file included from arch/riscv/include/asm/sections.h:9:
In file included from include/linux/mm.h:2213:
include/linux/vmstat.h:504:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
504 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
505 | item];
| ~~~~
include/linux/vmstat.h:511:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
511 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
512 | NR_VM_NUMA_EVENT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~~
include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
| ~~~~~~~~~~~ ^ ~~~
include/linux/vmstat.h:524:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
524 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
525 | NR_VM_NUMA_EVENT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~~
>> drivers/leds/leds-turris-omnia.c:409:12: warning: stack frame size (2064) exceeds limit (2048) in 'omnia_leds_probe' [-Wframe-larger-than] 409 | static int omnia_leds_probe(struct i2c_client *client)
| ^
5 warnings generated.
vim +/omnia_leds_probe +409 drivers/leds/leds-turris-omnia.c
43e9082fbccc7d Marek Behún 2023-09-18 408
4934630409cb60 Uwe Kleine-König 2022-11-18 @409 static int omnia_leds_probe(struct i2c_client *client)
089381b27abe28 Marek Behún 2020-07-23 410 {
089381b27abe28 Marek Behún 2020-07-23 411 struct device *dev = &client->dev;
122d57e2960c81 Krzysztof Kozlowski 2024-08-16 412 struct device_node *np = dev_of_node(dev);
089381b27abe28 Marek Behún 2020-07-23 413 struct omnia_leds *leds;
089381b27abe28 Marek Behún 2020-07-23 414 struct omnia_led *led;
089381b27abe28 Marek Behún 2020-07-23 415 int ret, count;
089381b27abe28 Marek Behún 2020-07-23 416
089381b27abe28 Marek Behún 2020-07-23 417 count = of_get_available_child_count(np);
089381b27abe28 Marek Behún 2020-07-23 418 if (!count) {
089381b27abe28 Marek Behún 2020-07-23 419 dev_err(dev, "LEDs are not defined in device tree!\n");
089381b27abe28 Marek Behún 2020-07-23 420 return -ENODEV;
089381b27abe28 Marek Behún 2020-07-23 421 } else if (count > OMNIA_BOARD_LEDS) {
089381b27abe28 Marek Behún 2020-07-23 422 dev_err(dev, "Too many LEDs defined in device tree!\n");
089381b27abe28 Marek Behún 2020-07-23 423 return -EINVAL;
089381b27abe28 Marek Behún 2020-07-23 424 }
089381b27abe28 Marek Behún 2020-07-23 425
089381b27abe28 Marek Behún 2020-07-23 426 leds = devm_kzalloc(dev, struct_size(leds, leds, count), GFP_KERNEL);
089381b27abe28 Marek Behún 2020-07-23 427 if (!leds)
089381b27abe28 Marek Behún 2020-07-23 428 return -ENOMEM;
089381b27abe28 Marek Behún 2020-07-23 429
089381b27abe28 Marek Behún 2020-07-23 430 leds->client = client;
089381b27abe28 Marek Behún 2020-07-23 431 i2c_set_clientdata(client, leds);
089381b27abe28 Marek Behún 2020-07-23 432
43e9082fbccc7d Marek Behún 2023-09-18 433 ret = omnia_mcu_get_features(client);
43e9082fbccc7d Marek Behún 2023-09-18 434 if (ret < 0) {
43e9082fbccc7d Marek Behún 2023-09-18 435 dev_err(dev, "Cannot determine MCU supported features: %d\n",
43e9082fbccc7d Marek Behún 2023-09-18 436 ret);
43e9082fbccc7d Marek Behún 2023-09-18 437 return ret;
43e9082fbccc7d Marek Behún 2023-09-18 438 }
43e9082fbccc7d Marek Behún 2023-09-18 439
43e9082fbccc7d Marek Behún 2023-09-18 440 leds->has_gamma_correction = ret & FEAT_LED_GAMMA_CORRECTION;
43e9082fbccc7d Marek Behún 2023-09-18 441 if (!leds->has_gamma_correction) {
43e9082fbccc7d Marek Behún 2023-09-18 442 dev_info(dev,
43e9082fbccc7d Marek Behún 2023-09-18 443 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
43e9082fbccc7d Marek Behún 2023-09-18 444 dev_info(dev,
43e9082fbccc7d Marek Behún 2023-09-18 445 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
43e9082fbccc7d Marek Behún 2023-09-18 446 }
43e9082fbccc7d Marek Behún 2023-09-18 447
089381b27abe28 Marek Behún 2020-07-23 448 mutex_init(&leds->lock);
089381b27abe28 Marek Behún 2020-07-23 449
cbd6954fecbeb8 Marek Behún 2023-09-18 450 ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
cbd6954fecbeb8 Marek Behún 2023-09-18 451 if (ret < 0) {
cbd6954fecbeb8 Marek Behún 2023-09-18 452 dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
cbd6954fecbeb8 Marek Behún 2023-09-18 453 return ret;
cbd6954fecbeb8 Marek Behún 2023-09-18 454 }
cbd6954fecbeb8 Marek Behún 2023-09-18 455
089381b27abe28 Marek Behún 2020-07-23 456 led = &leds->leds[0];
122d57e2960c81 Krzysztof Kozlowski 2024-08-16 457 for_each_available_child_of_node_scoped(np, child) {
089381b27abe28 Marek Behún 2020-07-23 458 ret = omnia_led_register(client, led, child);
122d57e2960c81 Krzysztof Kozlowski 2024-08-16 459 if (ret < 0)
089381b27abe28 Marek Behún 2020-07-23 460 return ret;
089381b27abe28 Marek Behún 2020-07-23 461
089381b27abe28 Marek Behún 2020-07-23 462 led += ret;
089381b27abe28 Marek Behún 2020-07-23 463 }
089381b27abe28 Marek Behún 2020-07-23 464
089381b27abe28 Marek Behún 2020-07-23 465 return 0;
089381b27abe28 Marek Behún 2020-07-23 466 }
089381b27abe28 Marek Behún 2020-07-23 467 Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Re: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver
Quoted 6 lines · kernel test robot
kernel test robot noticed the following build warnings:
Quoted 1 line
Quoted 1 line
drivers/leds/leds-turris-omnia.c:409:12: warning: stack frame size (2064) exceeds limit (2048) in 'omnia_leds_probe' [-Wframe-larger-than]409 | static int
omnia_leds_probe(struct i2c_client *client)
| ^
The problem here is the i2c_client on the stack, you can't do that:
static int omnia_mcu_get_features(const struct i2c_client *client) {
+ struct i2c_client mcu_client = *client;
u16 reply;
I haven't looked at this in detail, but there is usually a trivial alternative.
Arnd
Marek Behún
maintainerRe: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver
Quoted 13 lines · Arnd Bergmann
Quoted 6 lines · kernel test robot
kernel test robot noticed the following build warnings:
Quoted 1 line
Quoted 1 line
drivers/leds/leds-turris-omnia.c:409:12: warning: stack frame size (2064) exceeds limit (2048) in 'omnia_leds_probe' [-Wframe-larger-than]409 | static int
omnia_leds_probe(struct i2c_client *client)
| ^The problem here is the
i2c_clienton the stack, you can't do that:static int
omnia_mcu_get_features(const struct i2c_client *client){
drivers/leds/leds-turris-omnia.c ATTRIBUTE_GROUPS(omnia_led_controller); · line 388
Quoted 2 lines
drivers/leds/leds-turris-omnia.c +1
-0+struct i2c_client mcu_client = *client;u16 reply;
OMG, I see. struct i2c_client contains struct device.
OK, I will do this correctly by finding the MCU device on the I2C bus.
Marek
Marek Behún
maintainerPATCH v4 3/12 turris-omnia-mcu-interface.h: Add LED commands related definitions to global header
In reply to Marek BehúnAdd definitions for contents of the OMNIA_CMD_LED_MODE and OMNIA_CMD_LED_STATE commands to the global turris-omnia-mcu-interface.h header.
--- include/linux/turris-omnia-mcu-interface.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/linux/turris-omnia-mcu-interface.h +12 -0
@@ -239,6 +239,18 @@ enum omnia_int_e { OMNIA_INT_LAN5_LED1 = BIT(31), }; +enum omnia_cmd_led_mode_e { +OMNIA_CMD_LED_MODE_LED_MASK =GENMASK (3 ,0 ), +#define OMNIA_CMD_LED_MODE_LED(_l) FIELD_PREP(OMNIA_CMD_LED_MODE_LED_MASK, _l) + OMNIA_CMD_LED_MODE_USER = BIT(4), +}; + +enum omnia_cmd_led_state_e { +OMNIA_CMD_LED_STATE_LED_MASK =GENMASK (3 ,0 ), +#define OMNIA_CMD_LED_STATE_LED(_l) FIELD_PREP(OMNIA_CMD_LED_STATE_LED_MASK, _l) + OMNIA_CMD_LED_STATE_ON = BIT(4), +}; +enum omnia_cmd_poweroff_e {OMNIA_CMD_POWER_OFF_POWERON_BUTTON =BIT (0 ),OMNIA_CMD_POWER_OFF_MAGIC =0xdead ,
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 4/12 leds: turris-omnia: Use global header for MCU command definitions
In reply to Marek BehúnThe global turris-omnia-mcu-interface.h header file contains the definitions for MCU commands. Drop the driver-internal definitions and use the global ones.
--- drivers/leds/leds-turris-omnia.c | 71 +++++++++++--------------------- 1 file changed, 23 insertions(+), 48 deletions(-)
drivers/leds/leds-turris-omnia.c +23 -48
@@ -16,30 +16,8 @@#define OMNIA_BOARD_LEDS 12#define OMNIA_LED_NUM_CHANNELS 3 -/* MCU controller commands at I2C address 0x2a */ -#define OMNIA_MCU_I2C_ADDR 0x2a - -#define CMD_GET_STATUS_WORD 0x01 -#define STS_FEATURES_SUPPORTED BIT(2) - -#define CMD_GET_FEATURES 0x10 -#define FEAT_LED_GAMMA_CORRECTION BIT(5) - -/* LED controller commands at I2C address 0x2b */ -#define CMD_LED_MODE 0x03 -#define CMD_LED_MODE_LED (l) ((l) & 0x0f) -#define CMD_LED_MODE_USER 0x10 - -#define CMD_LED_STATE 0x04 -#define CMD_LED_STATE_LED (l) ((l) & 0x0f) -#define CMD_LED_STATE_ON 0x10 - -#define CMD_LED_COLOR 0x05 -#define CMD_LED_SET_BRIGHTNESS 0x07 -#define CMD_LED_GET_BRIGHTNESS 0x08 - -#define CMD_SET_GAMMA_CORRECTION 0x30 -#define CMD_GET_GAMMA_CORRECTION 0x31 +/* MCU controller I2C address 0x2a, needed for detecting MCU features */ +#define OMNIA_MCU_I2C_ADDR 0x2astruct omnia_led {struct led_classdev_mc mc_cdev;
@@ -60,7 +38,7 @@ struct omnia_leds {static int omnia_cmd_set_color (const struct i2c_client *client,u8 led,u8 r,u8 g,u8 b) { -u8 buf[5 ] = {CMD_LED_COLOR , led, r, g, b }; +u8 buf[5 ] = {OMNIA_CMD_LED_COLOR , led, r, g, b };return omnia_cmd_write (client, buf,sizeof (buf)); }
@@ -127,12 +105,12 @@ static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,* is not being blinked by HW. */ if (!err && !led->hwtrig && !brightness != !led->on) { -u8 state =CMD_LED_STATE_LED (led->reg); +u8 state =OMNIA_CMD_LED_STATE_LED (led->reg);if (brightness) - state |=CMD_LED_STATE_ON ; + state |=OMNIA_CMD_LED_STATE_ON ; - err =omnia_cmd_write_u8 (leds->client,CMD_LED_STATE , state); + err =omnia_cmd_write_u8 (leds->client,OMNIA_CMD_LED_STATE , state);if (!err) led->on = !!brightness; }
@@ -167,8 +145,8 @@ static int omnia_hwtrig_activate(struct led_classdev *cdev)if (!err) {/* Put the LED into MCU controlled mode */ - err =omnia_cmd_write_u8 (leds->client,CMD_LED_MODE , -CMD_LED_MODE_LED (led->reg)); + err =omnia_cmd_write_u8 (leds->client,OMNIA_CMD_LED_MODE , +OMNIA_CMD_LED_MODE_LED (led->reg));if (!err) led->hwtrig = true; }
@@ -189,9 +167,8 @@ static void omnia_hwtrig_deactivate(struct led_classdev *cdev) led->hwtrig = false;/* Put the LED into software mode */ - err =omnia_cmd_write_u8 (leds->client,CMD_LED_MODE , -CMD_LED_MODE_LED (led->reg) | -CMD_LED_MODE_USER ); + err =omnia_cmd_write_u8 (leds->client,OMNIA_CMD_LED_MODE , +OMNIA_CMD_LED_MODE_LED (led->reg) |OMNIA_CMD_LED_MODE_USER );mutex_unlock (&leds->lock);
@@ -258,9 +235,8 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led, cdev->default_trigger = omnia_hw_trigger.name;/* put the LED into software mode */ - ret =omnia_cmd_write_u8 (client,CMD_LED_MODE , -CMD_LED_MODE_LED (led->reg) | -CMD_LED_MODE_USER ); + ret =omnia_cmd_write_u8 (client,OMNIA_CMD_LED_MODE ,OMNIA_CMD_LED_MODE_LED (led->reg) | +OMNIA_CMD_LED_MODE_USER );if (ret) {dev_err (dev,"Cannot set LED %pOF to software mode: %i\n" , np, ret);
@@ -268,8 +244,7 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led, }/* disable the LED */ - ret =omnia_cmd_write_u8 (client,CMD_LED_STATE , -CMD_LED_STATE_LED (led->reg)); + ret =omnia_cmd_write_u8 (client,OMNIA_CMD_LED_STATE ,OMNIA_CMD_LED_STATE_LED (led->reg));if (ret) {dev_err (dev,"Cannot set LED %pOF brightness: %i\n" , np, ret);return ret;
@@ -311,7 +286,7 @@ static ssize_t brightness_show(struct device *dev, struct device_attribute *a,u8 reply;int err; - err =omnia_cmd_read_u8 (client,CMD_LED_GET_BRIGHTNESS , &reply); + err =omnia_cmd_read_u8 (client,OMNIA_CMD_GET_BRIGHTNESS , &reply);if (err <0 )return err;
@@ -331,7 +306,7 @@ static ssize_t brightness_store(struct device *dev, struct device_attribute *a,if (brightness >100 )return -EINVAL ; - err =omnia_cmd_write_u8 (client,CMD_LED_SET_BRIGHTNESS , brightness); + err =omnia_cmd_write_u8 (client,OMNIA_CMD_SET_BRIGHTNESS , brightness);return err ?: count; }
@@ -346,7 +321,7 @@ static ssize_t gamma_correction_show(struct device *dev,int err;if (leds->has_gamma_correction) { - err =omnia_cmd_read_u8 (client,CMD_GET_GAMMA_CORRECTION , &reply); + err =omnia_cmd_read_u8 (client,OMNIA_CMD_GET_GAMMA_CORRECTION , &reply);if (err <0 )return err; }
@@ -369,7 +344,7 @@ static ssize_t gamma_correction_store(struct device *dev,if (kstrtobool (buf, &val) <0 )return -EINVAL ; - err =omnia_cmd_write_u8 (client,CMD_SET_GAMMA_CORRECTION , val); + err =omnia_cmd_write_u8 (client,OMNIA_CMD_SET_GAMMA_CORRECTION , val);return err ?: count; }
@@ -391,15 +366,15 @@ static int omnia_mcu_get_features(const struct i2c_client *client)/* We have to read features from different I2C address */ mcu_client.addr =OMNIA_MCU_I2C_ADDR ; - err =omnia_cmd_read_u16 (&mcu_client,CMD_GET_STATUS_WORD , &reply); + err =omnia_cmd_read_u16 (&mcu_client,OMNIA_CMD_GET_STATUS_WORD , &reply);if (err)return err; -/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */ -if (!(reply &STS_FEATURES_SUPPORTED )) +/* Check whether MCU firmware supports the OMNIA_CMD_GET_FEAUTRES command */ +if (!(reply &OMNIA_STS_FEATURES_SUPPORTED ))return 0 ; - err =omnia_cmd_read_u16 (&mcu_client,CMD_GET_FEATURES , &reply); + err =omnia_cmd_read_u16 (&mcu_client,OMNIA_CMD_GET_FEATURES , &reply);if (err)return err;
@@ -437,7 +412,7 @@ static int omnia_leds_probe(struct i2c_client *client)return ret; } - leds->has_gamma_correction = ret &FEAT_LED_GAMMA_CORRECTION ; + leds->has_gamma_correction = ret &OMNIA_FEAT_LED_GAMMA_CORRECTION ;if (!leds->has_gamma_correction) {dev_info (dev,"Your board's MCU firmware does not support the LED gamma correction feature.\n" );
@@ -468,7 +443,7 @@ static int omnia_leds_probe(struct i2c_client *client)static void omnia_leds_remove (struct i2c_client *client) {/* put all LEDs into default (HW triggered) mode */ -omnia_cmd_write_u8 (client,CMD_LED_MODE ,CMD_LED_MODE_LED (OMNIA_BOARD_LEDS )); +omnia_cmd_write_u8 (client,OMNIA_CMD_LED_MODE ,OMNIA_CMD_LED_MODE_LED (OMNIA_BOARD_LEDS ));/* set all LEDs color to [255, 255, 255] */ omnia_cmd_set_color (client,OMNIA_BOARD_LEDS ,255 ,255 ,255 );
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 5/12 dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
In reply to Marek BehúnExtend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt.
--- .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +8 -0
@@ -23,6 +23,12 @@ properties: description: I2C slave address of the microcontroller. maxItems: 1 + interrupts: + description: + Specifier for the global LED brightness changed by front button press + interrupt. + maxItems: 1 + "#address-cells": const: 1
@@ -56,6 +62,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> i2c {
@@ -65,6 +72,7 @@ examples: led-controller@2b { compatible = "cznic,turris-omnia-leds"; reg = <0x2b>; + interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>; #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 6/12 leds: turris-omnia: Document driver private structures
In reply to Marek BehúnAdd documentation for driver private structures, struct omnia_leds and struct omnia_led.
--- drivers/leds/leds-turris-omnia.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/leds/leds-turris-omnia.c +16 -0
@@ -19,6 +19,15 @@/* MCU controller I2C address 0x2a, needed for detecting MCU features */ #define OMNIA_MCU_I2C_ADDR 0x2a +/** +* struct omnia_led - per-LED part of driver private data structure +* @mc_cdev: multi-color LED class device +* @subled_info: per-channel information +* @cached_channels: cached values of per-channel brightness that was sent to the MCU +* @on: whether the LED was set on +* @hwtrig: whether the LED blinking was offloaded to the MCU +* @reg: LED identifier to the MCU +*/ struct omnia_led {struct led_classdev_mc mc_cdev;struct mc_subled subled_info[OMNIA_LED_NUM_CHANNELS ];
@@ -29,6 +38,13 @@ struct omnia_led {#define to_omnia_led (l) container_of(l, struct omnia_led, mc_cdev) +/** +* struct omnia_leds - driver private data structure +* @client: I2C client device +* @lock: mutex to protect +* @has_gamma_correction: whether the MCU firmware supports gamma correction +* @leds: flexible array of per-LED data +*/ struct omnia_leds {struct i2c_client *client;struct mutex lock;
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 7/12 leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
In reply to Marek BehúnRecall that on Turris Omnia, the LED controller has a global brightness property, which allows the user to make the front LED panel dimmer.
There is also a button on the front panel, which by default is configured so that pressing it changes the global brightness to a lower value (unless it is at 0%, in which case pressing the button changes the global brightness to 100%).
Newer versions of the MCU firmware support informing the SOC that the brightness was changed by button press event via an interrupt.
Now that we have the turris-omnia-mcu driver, which adds support for MCU interrupts, add the ability to inform the userspace (via a sysfs notification) that the global brightness was changed.
--- drivers/leds/Kconfig | 1 + drivers/leds/leds-turris-omnia.c | 48 ++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+)
drivers/leds/Kconfig +1 -0
@@ -219,6 +219,7 @@ config LEDS_TURRIS_OMNIA depends on OF depends on TURRIS_OMNIA_MCU select LEDS_TRIGGERS + select TURRIS_OMNIA_MCU_GPIO help This option enables basic support for the LEDs found on the front side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
drivers/leds/leds-turris-omnia.c +48 -0
78 lines not on this page · raw message
Signature · 1 line
2.45.2
kernel test robot
build botRe: [PATCH leds v4 07/12] leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
kernel test robot noticed the following build warnings:
Hi Marek,
kernel test robot noticed the following build warnings:
[auto build test WARNING on linus/master]
[also build test WARNING on v6.12-rc5]
[cannot apply to lee-leds/for-leds-next robh/for-next next-20241030] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Marek-Beh-n/turris-omnia-mcu-interface-h-Move-command-execution-function-to-global-header/20241029-215858 base: linus/master patch link: https://lore.kernel.org/r/20241029135621.12546-8-kabel%40kernel.org patch subject: [PATCH leds v4 07/12] leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change config: x86_64-kismet-CONFIG_TURRIS_OMNIA_MCU_GPIO-CONFIG_LEDS_TURRIS_OMNIA-0-0 (https://download.01.org/0day-ci/archive/20241031/[email protected]/config) reproduce: (https://download.01.org/0day-ci/archive/20241031/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
kismet warnings: (new ones prefixed by >>)
>> kismet: WARNING: unmet direct dependencies detected for TURRIS_OMNIA_MCU_GPIO when selected by LEDS_TURRIS_OMNIA
WARNING: unmet direct dependencies detected for TURRIS_OMNIA_MCU_GPIO
Depends on [n]: CZNIC_PLATFORMS [=y] && TURRIS_OMNIA_MCU [=y] && GPIOLIB [=n] && OF [=y]
Selected by [y]:
- LEDS_TURRIS_OMNIA [=y] && NEW_LEDS [=y] && LEDS_CLASS_MULTICOLOR [=y] && I2C [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && OF [=y] && TURRIS_OMNIA_MCU [=y]
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Marek Behún
maintainerPATCH v4 8/12 platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature
In reply to Marek BehúnWhen reading MCU firmware features, check also for the LED panel brightness change interrupt feature, and suggest upgrading the firmware if it is missing.
--- drivers/platform/cznic/turris-omnia-mcu-base.c | 1 + 1 file changed, 1 insertion(+)
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
@@ -258,6 +258,7 @@ static int omnia_mcu_read_features(struct omnia_mcu *mcu)_DEF_FEAT (NEW_INT_API ,"new interrupt API" ),_DEF_FEAT (POWEROFF_WAKEUP ,"poweroff and wakeup" ),_DEF_FEAT (TRNG ,"true random number generator" ), +_DEF_FEAT (BRIGHTNESS_INT ,"LED panel brightness change interrupt" ), #undef _DEF_FEAT };struct i2c_client *client = mcu->client;
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 9/12 leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver
In reply to Marek BehúnIf the LED gamma correction feature is missing in the MCU firmware, inform about this in the MCU firmware probe function instead of LED driver probe function, so that all the feature checks are in one place.
--- drivers/leds/leds-turris-omnia.c | 6 ------ drivers/platform/cznic/turris-omnia-mcu-base.c | 1 + 2 files changed, 1 insertion(+), 6 deletions(-)
drivers/leds/leds-turris-omnia.c +0 -6
@@ -456,12 +456,6 @@ static int omnia_leds_probe(struct i2c_client *client) } leds->has_gamma_correction = ret &OMNIA_FEAT_LED_GAMMA_CORRECTION ; -if (!leds->has_gamma_correction) { -dev_info (dev, -"Your board's MCU firmware does not support the LED gamma correction feature.\n" ); -dev_info (dev, -"Consider upgrading MCU firmware with the omnia-mcutool utility.\n" ); - }if (ret &OMNIA_FEAT_BRIGHTNESS_INT ) { ret = devm_request_threaded_irq(dev, client->irq, NULL,
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
@@ -259,6 +259,7 @@ static int omnia_mcu_read_features(struct omnia_mcu *mcu)_DEF_FEAT (POWEROFF_WAKEUP ,"poweroff and wakeup" ),_DEF_FEAT (TRNG ,"true random number generator" ),_DEF_FEAT (BRIGHTNESS_INT ,"LED panel brightness change interrupt" ), +_DEF_FEAT (LED_GAMMA_CORRECTION ,"LED gamma correction" ), #undef _DEF_FEAT };struct i2c_client *client = mcu->client;
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 10/12 leds: turris-omnia: Use dev_err_probe() where appropriate
In reply to Marek BehúnUse dev_err_probe() instead of dev_err() + separate return where appropriate.
--- drivers/leds/leds-turris-omnia.c | 50 ++++++++++---------------------- 1 file changed, 16 insertions(+), 34 deletions(-)
drivers/leds/leds-turris-omnia.c +16 -34
@@ -256,33 +256,23 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,/* put the LED into software mode */ ret =omnia_cmd_write_u8 (client,OMNIA_CMD_LED_MODE ,OMNIA_CMD_LED_MODE_LED (led->reg) |OMNIA_CMD_LED_MODE_USER ); -if (ret) { -dev_err (dev,"Cannot set LED %pOF to software mode: %i\n" , np, - ret); -return ret; - } +if (ret) +return dev_err_probe (dev, ret,"Cannot set LED %pOF to software mode\n" , np);/* disable the LED */ ret =omnia_cmd_write_u8 (client,OMNIA_CMD_LED_STATE ,OMNIA_CMD_LED_STATE_LED (led->reg)); -if (ret) { -dev_err (dev,"Cannot set LED %pOF brightness: %i\n" , np, ret); -return ret; - } +if (ret) +return dev_err_probe (dev, ret,"Cannot set LED %pOF brightness\n" , np);/* Set initial color and cache it */ ret =omnia_led_send_color_cmd (client, led); -if (ret <0 ) { -dev_err (dev,"Cannot set LED %pOF initial color: %i\n" , np, - ret); -return ret; - } +if (ret <0 ) +return dev_err_probe (dev, ret,"Cannot set LED %pOF initial color\n" , np); ret =devm_led_classdev_multicolor_register_ext (dev, &led->mc_cdev, &init_data); -if (ret <0 ) { -dev_err (dev,"Cannot register LED %pOF: %i\n" , np, ret); -return ret; - } +if (ret <0 ) +return dev_err_probe (dev, ret,"Cannot register LED %pOF\n" , np);return 1 ; }
@@ -433,13 +423,10 @@ static int omnia_leds_probe(struct i2c_client *client)int ret, count; count =of_get_available_child_count (np); -if (!count) { -dev_err (dev,"LEDs are not defined in device tree!\n" ); -return -ENODEV ; - }else if (count >OMNIA_BOARD_LEDS ) { -dev_err (dev,"Too many LEDs defined in device tree!\n" ); -return -EINVAL ; - } +if (count ==0 ) +return dev_err_probe (dev, -ENODEV ,"LEDs are not defined in device tree!\n" ); +if (count >OMNIA_BOARD_LEDS ) +return dev_err_probe (dev, -EINVAL ,"Too many LEDs defined in device tree!\n" ); leds =devm_kzalloc (dev,struct_size (leds, leds, count),GFP_KERNEL );if (!leds)
@@ -449,11 +436,8 @@ static int omnia_leds_probe(struct i2c_client *client)i2c_set_clientdata (client, leds); ret =omnia_mcu_get_features (client); -if (ret <0 ) { -dev_err (dev,"Cannot determine MCU supported features: %d\n" , - ret); -return ret; - } +if (ret <0 ) +return dev_err_probe (dev, ret,"Cannot determine MCU supported features\n" ); leds->has_gamma_correction = ret &OMNIA_FEAT_LED_GAMMA_CORRECTION ;
@@ -468,10 +452,8 @@ static int omnia_leds_probe(struct i2c_client *client)mutex_init (&leds->lock); ret =devm_led_trigger_register (dev, &omnia_hw_trigger); -if (ret <0 ) { -dev_err (dev,"Cannot register private LED trigger: %d\n" , ret); -return ret; - } +if (ret <0 ) +return dev_err_probe (dev, ret,"Cannot register private LED trigger\n" ); led = &leds->leds[0 ];for_each_available_child_of_node_scoped (np, child) {
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 11/12 leds: turris-omnia: Use uppercase first letter in all comments
In reply to Marek BehúnChange first letter of 4 more comments to uppercase to make the driver comments uniform.
--- drivers/leds/leds-turris-omnia.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/leds/leds-turris-omnia.c +4 -4
@@ -253,13 +253,13 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,*/ cdev->default_trigger = omnia_hw_trigger.name; -/* put the LED into software mode */ +/* Put the LED into software mode */ ret =omnia_cmd_write_u8 (client,OMNIA_CMD_LED_MODE ,OMNIA_CMD_LED_MODE_LED (led->reg) |OMNIA_CMD_LED_MODE_USER );if (ret)return dev_err_probe (dev, ret,"Cannot set LED %pOF to software mode\n" , np); -/* disable the LED */ +/* Disable the LED */ ret =omnia_cmd_write_u8 (client,OMNIA_CMD_LED_STATE ,OMNIA_CMD_LED_STATE_LED (led->reg));if (ret)return dev_err_probe (dev, ret,"Cannot set LED %pOF brightness\n" , np);
@@ -482,10 +482,10 @@ static void omnia_leds_remove(struct i2c_client *client)if (leds->brightness_knode)sysfs_put (leds->brightness_knode); -/* put all LEDs into default (HW triggered) mode */ +/* Put all LEDs into default (HW triggered) mode */ omnia_cmd_write_u8 (client,OMNIA_CMD_LED_MODE ,OMNIA_CMD_LED_MODE_LED (OMNIA_BOARD_LEDS )); -/* set all LEDs color to [255, 255, 255] */ +/* Set all LEDs color to [255, 255, 255] */ omnia_cmd_set_color (client,OMNIA_BOARD_LEDS ,255 ,255 ,255 ); }
Signature · 1 line
2.45.2
Marek Behún
maintainerPATCH v4 12/12 ARM: dts: turris-omnia: Add global LED brightness change interrupt
In reply to Marek BehúnWhen global LED brightness is changed by pressing the front button on Turris Omnia, the MCU can produce an interrupt to the CPU. Add the description of this interrupt to the LED controller node.
--- arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +1 -0
@@ -251,6 +251,7 @@ mcu: system-controller@2a { led-controller@2b { compatible = "cznic,turris-omnia-leds"; reg = <0x2b>; + interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>; #address-cells = <1>; #size-cells = <0>; status = "okay";
Signature · 1 line
2.45.2