Skip to contentSkip to conversation

Turris Omnia LED driver changes

PATCH Superseded Marek Behún 3 participants 17 messages Oct 29, 2024 – Nov 1, 2024

Subsystems (4)

v4 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Marek Behún

author maintainer
#0 lore raw

v4 cover Turris Omnia LED driver changes

Hello Lee,

this is v4 of Turris Omnia LED driver changes.
v1, v2 and v3 can be found at
https://lore.kernel.org/linux-leds/[email protected]/
https://lore.kernel.org/linux-leds/[email protected]/
https://lore.kernel.org/linux-leds/[email protected]/

Changes since v3:
- fixed kernel test robot warning for patch 2 by adding dependency to the TURRIS_OMNIA_MCU module
- added Krzysztof's Acked-by to patch 5
- added patch documenting driver private struct omnia_leds and struct omnia_led
- addressed your notes for patch 7 (6 in v3)
- added select TURRIS_OMNIA_MCU_GPIO to KConfig. The driver already depends on TURRIS_OMNIA_MCU, but for the global brightness changed interrupt it needs the GPIO functionality from the turris-omnia-mcu driver

Marek

Marek Behún (12):
turris-omnia-mcu-interface.h: Move command execution function to
global header
leds: turris-omnia: Use command execution functions from the MCU
driver
turris-omnia-mcu-interface.h: Add LED commands related definitions to
global header
leds: turris-omnia: Use global header for MCU command definitions
dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property
leds: turris-omnia: Document driver private structures
leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
platform: cznic: turris-omnia-mcu: Inform about missing LED panel
brightness change interrupt feature
leds: turris-omnia: Inform about missing LED gamma correction feature
in the MCU driver
leds: turris-omnia: Use dev_err_probe() where appropriate
leds: turris-omnia: Use uppercase first letter in all comments
ARM: dts: turris-omnia: Add global LED brightness change interrupt

 .../leds/cznic,turris-omnia-leds.yaml         |   8 +
 .../dts/marvell/armada-385-turris-omnia.dts   |   1 +
 drivers/leds/Kconfig                          |   2 +
 drivers/leds/leds-turris-omnia.c              | 291 ++++++++----------
 .../platform/cznic/turris-omnia-mcu-base.c    |   3 +
 drivers/platform/cznic/turris-omnia-mcu.h     | 130 --------
 include/linux/turris-omnia-mcu-interface.h    | 148 ++++++++-
 7 files changed, 288 insertions(+), 295 deletions(-)
Signature · 1 line
2.45.2
author maintainer
#1 lore raw

PATCH v4 1/12 turris-omnia-mcu-interface.h: Move command execution function to global header

Move the command execution functions from the turris-omnia-mcu platform driver private header to the global turris-omnia-mcu-interface.h header, so that they can be used by the LED driver.

---
 .../platform/cznic/turris-omnia-mcu-base.c    |   1 +
 drivers/platform/cznic/turris-omnia-mcu.h     | 130 -----------------
 include/linux/turris-omnia-mcu-interface.h    | 136 +++++++++++++++++-
 3 files changed, 136 insertions(+), 131 deletions(-)
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
index 58f9afae2867..bb871226e357 100644
@@ -52,6 +52,7 @@ int omnia_cmd_write_read(const struct i2c_client *client,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(omnia_cmd_write_read);
 
 static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
 				  char version[static OMNIA_FW_VERSION_HEX_LEN])
drivers/platform/cznic/turris-omnia-mcu.h +0 -130

148 lines not on this page · raw message

include/linux/turris-omnia-mcu-interface.h +135 -1

146 lines not on this page · raw message

Signature · 1 line
2.45.2
author maintainer
#2 lore raw

PATCH v4 2/12 leds: turris-omnia: Use command execution functions from the MCU driver

In reply to Marek Behún

Use the MCU command execution functions from the MCU driver instead of the ad-hoc implementation in the LED driver. This allows as to drop the LED driver implementation, which is a duplicate.

---
 drivers/leds/Kconfig             |   1 +
 drivers/leds/leds-turris-omnia.c | 110 ++++++++-----------------------
 2 files changed, 30 insertions(+), 81 deletions(-)
drivers/leds/Kconfig +1 -0
index b784bb74a837..fcbe93b61e49 100644
@@ -217,6 +217,7 @@ config LEDS_TURRIS_OMNIA
 	depends on I2C
 	depends on MACH_ARMADA_38X || COMPILE_TEST
 	depends on OF
+	depends on TURRIS_OMNIA_MCU
 	select LEDS_TRIGGERS
 	help
 	  This option enables basic support for the LEDs found on the front
drivers/leds/leds-turris-omnia.c +29 -81

183 lines not on this page · raw message

Signature · 1 line
2.45.2
#3 lore raw

Re: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver

kernel test robot noticed the following build warnings:

Hi Marek,

kernel test robot noticed the following build warnings:

[auto build test WARNING on linus/master]
[also build test WARNING on v6.12-rc5]
[cannot apply to lee-leds/for-leds-next robh/for-next next-20241030] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Marek-Beh-n/turris-omnia-mcu-interface-h-Move-command-execution-function-to-global-header/20241029-215858
base:   linus/master
patch link:    https://lore.kernel.org/r/20241029135621.12546-3-kabel%40kernel.org
patch subject: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver
config: riscv-allmodconfig (https://download.01.org/0day-ci/archive/20241031/[email protected]/config)
compiler: clang version 20.0.0git (https://github.com/llvm/llvm-project 639a7ac648f1e50ccd2556e17d401c04f9cce625)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241031/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

In file included from drivers/leds/leds-turris-omnia.c:8:
In file included from include/linux/i2c.h:19:
In file included from include/linux/regulator/consumer.h:35:
In file included from include/linux/suspend.h:5:
In file included from include/linux/swap.h:9:
In file included from include/linux/memcontrol.h:13:
In file included from include/linux/cgroup.h:26:
In file included from include/linux/kernel_stat.h:8:
In file included from include/linux/interrupt.h:22:
In file included from arch/riscv/include/asm/sections.h:9:
In file included from include/linux/mm.h:2213:
include/linux/vmstat.h:504:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]

     504 |         return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~ ^
     505 |                            item];
         |                            ~~~~
   include/linux/vmstat.h:511:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
     511 |         return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~ ^
     512 |                            NR_VM_NUMA_EVENT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~~
   include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]
     518 |         return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
         |                               ~~~~~~~~~~~ ^ ~~~
   include/linux/vmstat.h:524:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
     524 |         return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~ ^
     525 |                            NR_VM_NUMA_EVENT_ITEMS +
         |                            ~~~~~~~~~~~~~~~~~~~~~~
>> drivers/leds/leds-turris-omnia.c:409:12: warning: stack frame size (2064) exceeds limit (2048) in 'omnia_leds_probe' [-Wframe-larger-than]

409 | static int omnia_leds_probe(struct i2c_client *client)
| ^
5 warnings generated.

vim +/omnia_leds_probe +409 drivers/leds/leds-turris-omnia.c

43e9082fbccc7d Marek Behún         2023-09-18  408  
4934630409cb60 Uwe Kleine-König    2022-11-18 @409  static int omnia_leds_probe(struct i2c_client *client)
089381b27abe28 Marek Behún         2020-07-23  410  {
089381b27abe28 Marek Behún         2020-07-23  411  	struct device *dev = &client->dev;
122d57e2960c81 Krzysztof Kozlowski 2024-08-16  412  	struct device_node *np = dev_of_node(dev);
089381b27abe28 Marek Behún         2020-07-23  413  	struct omnia_leds *leds;
089381b27abe28 Marek Behún         2020-07-23  414  	struct omnia_led *led;
089381b27abe28 Marek Behún         2020-07-23  415  	int ret, count;
089381b27abe28 Marek Behún         2020-07-23  416  
089381b27abe28 Marek Behún         2020-07-23  417  	count = of_get_available_child_count(np);
089381b27abe28 Marek Behún         2020-07-23  418  	if (!count) {
089381b27abe28 Marek Behún         2020-07-23  419  		dev_err(dev, "LEDs are not defined in device tree!\n");
089381b27abe28 Marek Behún         2020-07-23  420  		return -ENODEV;
089381b27abe28 Marek Behún         2020-07-23  421  	} else if (count > OMNIA_BOARD_LEDS) {
089381b27abe28 Marek Behún         2020-07-23  422  		dev_err(dev, "Too many LEDs defined in device tree!\n");
089381b27abe28 Marek Behún         2020-07-23  423  		return -EINVAL;
089381b27abe28 Marek Behún         2020-07-23  424  	}
089381b27abe28 Marek Behún         2020-07-23  425  
089381b27abe28 Marek Behún         2020-07-23  426  	leds = devm_kzalloc(dev, struct_size(leds, leds, count), GFP_KERNEL);
089381b27abe28 Marek Behún         2020-07-23  427  	if (!leds)
089381b27abe28 Marek Behún         2020-07-23  428  		return -ENOMEM;
089381b27abe28 Marek Behún         2020-07-23  429  
089381b27abe28 Marek Behún         2020-07-23  430  	leds->client = client;
089381b27abe28 Marek Behún         2020-07-23  431  	i2c_set_clientdata(client, leds);
089381b27abe28 Marek Behún         2020-07-23  432  
43e9082fbccc7d Marek Behún         2023-09-18  433  	ret = omnia_mcu_get_features(client);
43e9082fbccc7d Marek Behún         2023-09-18  434  	if (ret < 0) {
43e9082fbccc7d Marek Behún         2023-09-18  435  		dev_err(dev, "Cannot determine MCU supported features: %d\n",
43e9082fbccc7d Marek Behún         2023-09-18  436  			ret);
43e9082fbccc7d Marek Behún         2023-09-18  437  		return ret;
43e9082fbccc7d Marek Behún         2023-09-18  438  	}
43e9082fbccc7d Marek Behún         2023-09-18  439  
43e9082fbccc7d Marek Behún         2023-09-18  440  	leds->has_gamma_correction = ret & FEAT_LED_GAMMA_CORRECTION;
43e9082fbccc7d Marek Behún         2023-09-18  441  	if (!leds->has_gamma_correction) {
43e9082fbccc7d Marek Behún         2023-09-18  442  		dev_info(dev,
43e9082fbccc7d Marek Behún         2023-09-18  443  			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
43e9082fbccc7d Marek Behún         2023-09-18  444  		dev_info(dev,
43e9082fbccc7d Marek Behún         2023-09-18  445  			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
43e9082fbccc7d Marek Behún         2023-09-18  446  	}
43e9082fbccc7d Marek Behún         2023-09-18  447  
089381b27abe28 Marek Behún         2020-07-23  448  	mutex_init(&leds->lock);
089381b27abe28 Marek Behún         2020-07-23  449  
cbd6954fecbeb8 Marek Behún         2023-09-18  450  	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
cbd6954fecbeb8 Marek Behún         2023-09-18  451  	if (ret < 0) {
cbd6954fecbeb8 Marek Behún         2023-09-18  452  		dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
cbd6954fecbeb8 Marek Behún         2023-09-18  453  		return ret;
cbd6954fecbeb8 Marek Behún         2023-09-18  454  	}
cbd6954fecbeb8 Marek Behún         2023-09-18  455  
089381b27abe28 Marek Behún         2020-07-23  456  	led = &leds->leds[0];
122d57e2960c81 Krzysztof Kozlowski 2024-08-16  457  	for_each_available_child_of_node_scoped(np, child) {
089381b27abe28 Marek Behún         2020-07-23  458  		ret = omnia_led_register(client, led, child);
122d57e2960c81 Krzysztof Kozlowski 2024-08-16  459  		if (ret < 0)
089381b27abe28 Marek Behún         2020-07-23  460  			return ret;
089381b27abe28 Marek Behún         2020-07-23  461  
089381b27abe28 Marek Behún         2020-07-23  462  		led += ret;
089381b27abe28 Marek Behún         2020-07-23  463  	}
089381b27abe28 Marek Behún         2020-07-23  464  
089381b27abe28 Marek Behún         2020-07-23  465  	return 0;
089381b27abe28 Marek Behún         2020-07-23  466  }
089381b27abe28 Marek Behún         2020-07-23  467  
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#4 lore raw

Re: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver

Quoted 6 lines · kernel test robot

kernel test robot noticed the following build warnings:

Quoted 1 line
Quoted 1 line

drivers/leds/leds-turris-omnia.c:409:12: warning: stack frame size (2064) exceeds limit (2048) in 'omnia_leds_probe' [-Wframe-larger-than]

409 | static int omnia_leds_probe(struct i2c_client *client)
| ^

The problem here is the i2c_client on the stack, you can't do that:

static int omnia_mcu_get_features(const struct i2c_client *client) {
+ struct i2c_client mcu_client = *client;
u16 reply;

I haven't looked at this in detail, but there is usually a trivial alternative.

Arnd

author maintainer
#5 lore raw

Re: [PATCH leds v4 02/12] leds: turris-omnia: Use command execution functions from the MCU driver

Quoted 13 lines · Arnd Bergmann
Quoted 6 lines · kernel test robot

kernel test robot noticed the following build warnings:

Quoted 1 line
Quoted 1 line

drivers/leds/leds-turris-omnia.c:409:12: warning: stack frame size (2064) exceeds limit (2048) in 'omnia_leds_probe' [-Wframe-larger-than]

409 | static int omnia_leds_probe(struct i2c_client *client)
| ^

The problem here is the i2c_client on the stack, you can't do that:

static int omnia_mcu_get_features(const struct i2c_client *client) {

drivers/leds/leds-turris-omnia.c ATTRIBUTE_GROUPS(omnia_led_controller); · line 388

Quoted 2 lines
drivers/leds/leds-turris-omnia.c +1 -0
+	struct i2c_client mcu_client = *client;
 	u16 reply;

OMG, I see. struct i2c_client contains struct device.
OK, I will do this correctly by finding the MCU device on the I2C bus.

Marek

author maintainer
#6 lore raw

PATCH v4 3/12 turris-omnia-mcu-interface.h: Add LED commands related definitions to global header

In reply to Marek Behún

Add definitions for contents of the OMNIA_CMD_LED_MODE and OMNIA_CMD_LED_STATE commands to the global turris-omnia-mcu-interface.h header.

---
 include/linux/turris-omnia-mcu-interface.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)
include/linux/turris-omnia-mcu-interface.h +12 -0
index 7f24cc682780..06c94e032c6f 100644
@@ -239,6 +239,18 @@ enum omnia_int_e {
 	OMNIA_INT_LAN5_LED1		= BIT(31),
 };
 
+enum omnia_cmd_led_mode_e {
+	OMNIA_CMD_LED_MODE_LED_MASK	= GENMASK(3, 0),
+#define OMNIA_CMD_LED_MODE_LED(_l)	FIELD_PREP(OMNIA_CMD_LED_MODE_LED_MASK, _l)
+	OMNIA_CMD_LED_MODE_USER		= BIT(4),
+};
+
+enum omnia_cmd_led_state_e {
+	OMNIA_CMD_LED_STATE_LED_MASK	= GENMASK(3, 0),
+#define OMNIA_CMD_LED_STATE_LED(_l)	FIELD_PREP(OMNIA_CMD_LED_STATE_LED_MASK, _l)
+	OMNIA_CMD_LED_STATE_ON		= BIT(4),
+};
+
 enum omnia_cmd_poweroff_e {
 	OMNIA_CMD_POWER_OFF_POWERON_BUTTON	= BIT(0),
 	OMNIA_CMD_POWER_OFF_MAGIC		= 0xdead,
Signature · 1 line
2.45.2
author maintainer
#7 lore raw

PATCH v4 4/12 leds: turris-omnia: Use global header for MCU command definitions

In reply to Marek Behún

The global turris-omnia-mcu-interface.h header file contains the definitions for MCU commands. Drop the driver-internal definitions and use the global ones.

---
 drivers/leds/leds-turris-omnia.c | 71 +++++++++++---------------------
 1 file changed, 23 insertions(+), 48 deletions(-)
drivers/leds/leds-turris-omnia.c +23 -48
index 0b71848930dd..82cf58fbe946 100644
@@ -16,30 +16,8 @@
 #define OMNIA_BOARD_LEDS	12
 #define OMNIA_LED_NUM_CHANNELS	3
 
-/* MCU controller commands at I2C address 0x2a */
-#define OMNIA_MCU_I2C_ADDR		0x2a
-
-#define CMD_GET_STATUS_WORD		0x01
-#define STS_FEATURES_SUPPORTED		BIT(2)
-
-#define CMD_GET_FEATURES		0x10
-#define FEAT_LED_GAMMA_CORRECTION	BIT(5)
-
-/* LED controller commands at I2C address 0x2b */
-#define CMD_LED_MODE			0x03
-#define CMD_LED_MODE_LED(l)		((l) & 0x0f)
-#define CMD_LED_MODE_USER		0x10
-
-#define CMD_LED_STATE			0x04
-#define CMD_LED_STATE_LED(l)		((l) & 0x0f)
-#define CMD_LED_STATE_ON		0x10
-
-#define CMD_LED_COLOR			0x05
-#define CMD_LED_SET_BRIGHTNESS		0x07
-#define CMD_LED_GET_BRIGHTNESS		0x08
-
-#define CMD_SET_GAMMA_CORRECTION	0x30
-#define CMD_GET_GAMMA_CORRECTION	0x31
+/* MCU controller I2C address 0x2a, needed for detecting MCU features */
+#define OMNIA_MCU_I2C_ADDR	0x2a
 
 struct omnia_led {
 	struct led_classdev_mc mc_cdev;
@@ -60,7 +38,7 @@ struct omnia_leds {
 
 static int omnia_cmd_set_color(const struct i2c_client *client, u8 led, u8 r, u8 g, u8 b)
 {
-	u8 buf[5] = { CMD_LED_COLOR, led, r, g, b };
+	u8 buf[5] = { OMNIA_CMD_LED_COLOR, led, r, g, b };
 
 	return omnia_cmd_write(client, buf, sizeof(buf));
 }
@@ -127,12 +105,12 @@ static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
 	 * is not being blinked by HW.
 	 */
 	if (!err && !led->hwtrig && !brightness != !led->on) {
-		u8 state = CMD_LED_STATE_LED(led->reg);
+		u8 state = OMNIA_CMD_LED_STATE_LED(led->reg);
 
 		if (brightness)
-			state |= CMD_LED_STATE_ON;
+			state |= OMNIA_CMD_LED_STATE_ON;
 
-		err = omnia_cmd_write_u8(leds->client, CMD_LED_STATE, state);
+		err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_STATE, state);
 		if (!err)
 			led->on = !!brightness;
 	}
@@ -167,8 +145,8 @@ static int omnia_hwtrig_activate(struct led_classdev *cdev)
 
 	if (!err) {
 		/* Put the LED into MCU controlled mode */
-		err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-					 CMD_LED_MODE_LED(led->reg));
+		err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_MODE,
+					 OMNIA_CMD_LED_MODE_LED(led->reg));
 		if (!err)
 			led->hwtrig = true;
 	}
@@ -189,9 +167,8 @@ static void omnia_hwtrig_deactivate(struct led_classdev *cdev)
 	led->hwtrig = false;
 
 	/* Put the LED into software mode */
-	err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-				 CMD_LED_MODE_LED(led->reg) |
-				 CMD_LED_MODE_USER);
+	err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_MODE,
+				 OMNIA_CMD_LED_MODE_LED(led->reg) | OMNIA_CMD_LED_MODE_USER);
 
 	mutex_unlock(&leds->lock);
 
@@ -258,9 +235,8 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	cdev->default_trigger = omnia_hw_trigger.name;
 
 	/* put the LED into software mode */
-	ret = omnia_cmd_write_u8(client, CMD_LED_MODE,
-				 CMD_LED_MODE_LED(led->reg) |
-				 CMD_LED_MODE_USER);
+	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
+							     OMNIA_CMD_LED_MODE_USER);
 	if (ret) {
 		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
 			ret);
@@ -268,8 +244,7 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	}
 
 	/* disable the LED */
-	ret = omnia_cmd_write_u8(client, CMD_LED_STATE,
-				 CMD_LED_STATE_LED(led->reg));
+	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
 	if (ret) {
 		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
 		return ret;
@@ -311,7 +286,7 @@ static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
 	u8 reply;
 	int err;
 
-	err = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS, &reply);
+	err = omnia_cmd_read_u8(client, OMNIA_CMD_GET_BRIGHTNESS, &reply);
 	if (err < 0)
 		return err;
 
@@ -331,7 +306,7 @@ static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
 	if (brightness > 100)
 		return -EINVAL;
 
-	err = omnia_cmd_write_u8(client, CMD_LED_SET_BRIGHTNESS, brightness);
+	err = omnia_cmd_write_u8(client, OMNIA_CMD_SET_BRIGHTNESS, brightness);
 
 	return err ?: count;
 }
@@ -346,7 +321,7 @@ static ssize_t gamma_correction_show(struct device *dev,
 	int err;
 
 	if (leds->has_gamma_correction) {
-		err = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION, &reply);
+		err = omnia_cmd_read_u8(client, OMNIA_CMD_GET_GAMMA_CORRECTION, &reply);
 		if (err < 0)
 			return err;
 	}
@@ -369,7 +344,7 @@ static ssize_t gamma_correction_store(struct device *dev,
 	if (kstrtobool(buf, &val) < 0)
 		return -EINVAL;
 
-	err = omnia_cmd_write_u8(client, CMD_SET_GAMMA_CORRECTION, val);
+	err = omnia_cmd_write_u8(client, OMNIA_CMD_SET_GAMMA_CORRECTION, val);
 
 	return err ?: count;
 }
@@ -391,15 +366,15 @@ static int omnia_mcu_get_features(const struct i2c_client *client)
 	/* We have to read features from different I2C address */
 	mcu_client.addr = OMNIA_MCU_I2C_ADDR;
 
-	err = omnia_cmd_read_u16(&mcu_client, CMD_GET_STATUS_WORD, &reply);
+	err = omnia_cmd_read_u16(&mcu_client, OMNIA_CMD_GET_STATUS_WORD, &reply);
 	if (err)
 		return err;
 
-	/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
-	if (!(reply & STS_FEATURES_SUPPORTED))
+	/* Check whether MCU firmware supports the OMNIA_CMD_GET_FEAUTRES command */
+	if (!(reply & OMNIA_STS_FEATURES_SUPPORTED))
 		return 0;
 
-	err = omnia_cmd_read_u16(&mcu_client, CMD_GET_FEATURES, &reply);
+	err = omnia_cmd_read_u16(&mcu_client, OMNIA_CMD_GET_FEATURES, &reply);
 	if (err)
 		return err;
 
@@ -437,7 +412,7 @@ static int omnia_leds_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	leds->has_gamma_correction = ret & FEAT_LED_GAMMA_CORRECTION;
+	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
 	if (!leds->has_gamma_correction) {
 		dev_info(dev,
 			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
@@ -468,7 +443,7 @@ static int omnia_leds_probe(struct i2c_client *client)
 static void omnia_leds_remove(struct i2c_client *client)
 {
 	/* put all LEDs into default (HW triggered) mode */
-	omnia_cmd_write_u8(client, CMD_LED_MODE, CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
+	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
 	/* set all LEDs color to [255, 255, 255] */
 	omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);
Signature · 1 line
2.45.2
author maintainer
#8 lore raw

PATCH v4 5/12 dt-bindings: leds: cznic,turris-omnia-leds: Allow interrupts property

In reply to Marek Behún

Extend the cznic,turris-omnia-leds binding with interrupts property, specifying the global LED brightness changed by button press interrupt.

---
 .../devicetree/bindings/leds/cznic,turris-omnia-leds.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml +8 -0
index 34ef5215c150..f52f6304c79e 100644
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -56,6 +62,7 @@ additionalProperties: false
 examples:
   - |
 
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -65,6 +72,7 @@ examples:
         led-controller@2b {
             compatible = "cznic,turris-omnia-leds";
             reg = <0x2b>;
+            interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
             #address-cells = <1>;
             #size-cells = <0>;
 
Signature · 1 line
2.45.2
author maintainer
#9 lore raw

PATCH v4 6/12 leds: turris-omnia: Document driver private structures

In reply to Marek Behún

Add documentation for driver private structures, struct omnia_leds and struct omnia_led.

---
 drivers/leds/leds-turris-omnia.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/leds/leds-turris-omnia.c +16 -0
index 82cf58fbe946..b13b3b269ae9 100644
@@ -19,6 +19,15 @@
 /* MCU controller I2C address 0x2a, needed for detecting MCU features */
 #define OMNIA_MCU_I2C_ADDR	0x2a
 
+/**
+ * struct omnia_led - per-LED part of driver private data structure
+ * @mc_cdev:		multi-color LED class device
+ * @subled_info:	per-channel information
+ * @cached_channels:	cached values of per-channel brightness that was sent to the MCU
+ * @on:			whether the LED was set on
+ * @hwtrig:		whether the LED blinking was offloaded to the MCU
+ * @reg:		LED identifier to the MCU
+ */
 struct omnia_led {
 	struct led_classdev_mc mc_cdev;
 	struct mc_subled subled_info[OMNIA_LED_NUM_CHANNELS];
@@ -29,6 +38,13 @@ struct omnia_led {
 
 #define to_omnia_led(l)		container_of(l, struct omnia_led, mc_cdev)
 
+/**
+ * struct omnia_leds - driver private data structure
+ * @client:			I2C client device
+ * @lock:			mutex to protect
+ * @has_gamma_correction:	whether the MCU firmware supports gamma correction
+ * @leds:			flexible array of per-LED data
+ */
 struct omnia_leds {
 	struct i2c_client *client;
 	struct mutex lock;
Signature · 1 line
2.45.2
author maintainer
#10 lore raw

PATCH v4 7/12 leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change

In reply to Marek Behún

Recall that on Turris Omnia, the LED controller has a global brightness property, which allows the user to make the front LED panel dimmer.

There is also a button on the front panel, which by default is configured so that pressing it changes the global brightness to a lower value (unless it is at 0%, in which case pressing the button changes the global brightness to 100%).

Newer versions of the MCU firmware support informing the SOC that the brightness was changed by button press event via an interrupt.

Now that we have the turris-omnia-mcu driver, which adds support for MCU interrupts, add the ability to inform the userspace (via a sysfs notification) that the global brightness was changed.

---
 drivers/leds/Kconfig             |  1 +
 drivers/leds/leds-turris-omnia.c | 48 ++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
drivers/leds/Kconfig +1 -0
index fcbe93b61e49..443aaf948bb8 100644
@@ -219,6 +219,7 @@ config LEDS_TURRIS_OMNIA
 	depends on OF
 	depends on TURRIS_OMNIA_MCU
 	select LEDS_TRIGGERS
+	select TURRIS_OMNIA_MCU_GPIO
 	help
 	  This option enables basic support for the LEDs found on the front
 	  side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
drivers/leds/leds-turris-omnia.c +48 -0

78 lines not on this page · raw message

Signature · 1 line
2.45.2
#11 lore raw

Re: [PATCH leds v4 07/12] leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change

kernel test robot noticed the following build warnings:

Hi Marek,

kernel test robot noticed the following build warnings:

[auto build test WARNING on linus/master]
[also build test WARNING on v6.12-rc5]
[cannot apply to lee-leds/for-leds-next robh/for-next next-20241030] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Marek-Beh-n/turris-omnia-mcu-interface-h-Move-command-execution-function-to-global-header/20241029-215858
base:   linus/master
patch link:    https://lore.kernel.org/r/20241029135621.12546-8-kabel%40kernel.org
patch subject: [PATCH leds v4 07/12] leds: turris-omnia: Notify sysfs on MCU global LEDs brightness change
config: x86_64-kismet-CONFIG_TURRIS_OMNIA_MCU_GPIO-CONFIG_LEDS_TURRIS_OMNIA-0-0 (https://download.01.org/0day-ci/archive/20241031/[email protected]/config)
reproduce: (https://download.01.org/0day-ci/archive/20241031/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

kismet warnings: (new ones prefixed by >>)

>> kismet: WARNING: unmet direct dependencies detected for TURRIS_OMNIA_MCU_GPIO when selected by LEDS_TURRIS_OMNIA

WARNING: unmet direct dependencies detected for TURRIS_OMNIA_MCU_GPIO
Depends on [n]: CZNIC_PLATFORMS [=y] && TURRIS_OMNIA_MCU [=y] && GPIOLIB [=n] && OF [=y]
Selected by [y]:
- LEDS_TURRIS_OMNIA [=y] && NEW_LEDS [=y] && LEDS_CLASS_MULTICOLOR [=y] && I2C [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && OF [=y] && TURRIS_OMNIA_MCU [=y]

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
author maintainer
#12 lore raw

PATCH v4 8/12 platform: cznic: turris-omnia-mcu: Inform about missing LED panel brightness change interrupt feature

In reply to Marek Behún

When reading MCU firmware features, check also for the LED panel brightness change interrupt feature, and suggest upgrading the firmware if it is missing.

---
 drivers/platform/cznic/turris-omnia-mcu-base.c | 1 +
 1 file changed, 1 insertion(+)
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
index bb871226e357..3bb4a3cfdb29 100644
@@ -258,6 +258,7 @@ static int omnia_mcu_read_features(struct omnia_mcu *mcu)
 		_DEF_FEAT(NEW_INT_API,		"new interrupt API"),
 		_DEF_FEAT(POWEROFF_WAKEUP,	"poweroff and wakeup"),
 		_DEF_FEAT(TRNG,			"true random number generator"),
+		_DEF_FEAT(BRIGHTNESS_INT,	"LED panel brightness change interrupt"),
 #undef _DEF_FEAT
 	};
 	struct i2c_client *client = mcu->client;
Signature · 1 line
2.45.2
author maintainer
#13 lore raw

PATCH v4 9/12 leds: turris-omnia: Inform about missing LED gamma correction feature in the MCU driver

In reply to Marek Behún

If the LED gamma correction feature is missing in the MCU firmware, inform about this in the MCU firmware probe function instead of LED driver probe function, so that all the feature checks are in one place.

---
 drivers/leds/leds-turris-omnia.c               | 6 ------
 drivers/platform/cznic/turris-omnia-mcu-base.c | 1 +
 2 files changed, 1 insertion(+), 6 deletions(-)
drivers/leds/leds-turris-omnia.c +0 -6
index ac7938f57bfe..0b0cf592557a 100644
@@ -456,12 +456,6 @@ static int omnia_leds_probe(struct i2c_client *client)
 	}
 
 	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
-	if (!leds->has_gamma_correction) {
-		dev_info(dev,
-			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
-		dev_info(dev,
-			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
-	}
 
 	if (ret & OMNIA_FEAT_BRIGHTNESS_INT) {
 		ret = devm_request_threaded_irq(dev, client->irq, NULL,
drivers/platform/cznic/turris-omnia-mcu-base.c +1 -0
index 3bb4a3cfdb29..770e680b96f9 100644
@@ -259,6 +259,7 @@ static int omnia_mcu_read_features(struct omnia_mcu *mcu)
 		_DEF_FEAT(POWEROFF_WAKEUP,	"poweroff and wakeup"),
 		_DEF_FEAT(TRNG,			"true random number generator"),
 		_DEF_FEAT(BRIGHTNESS_INT,	"LED panel brightness change interrupt"),
+		_DEF_FEAT(LED_GAMMA_CORRECTION,	"LED gamma correction"),
 #undef _DEF_FEAT
 	};
 	struct i2c_client *client = mcu->client;
Signature · 1 line
2.45.2
author maintainer
#14 lore raw

PATCH v4 10/12 leds: turris-omnia: Use dev_err_probe() where appropriate

In reply to Marek Behún

Use dev_err_probe() instead of dev_err() + separate return where appropriate.

---
 drivers/leds/leds-turris-omnia.c | 50 ++++++++++----------------------
 1 file changed, 16 insertions(+), 34 deletions(-)
drivers/leds/leds-turris-omnia.c +16 -34
index 0b0cf592557a..515ba2991cf5 100644
@@ -256,33 +256,23 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	/* put the LED into software mode */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
 							     OMNIA_CMD_LED_MODE_USER);
-	if (ret) {
-		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
-			ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot set LED %pOF to software mode\n", np);
 
 	/* disable the LED */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
-	if (ret) {
-		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Cannot set LED %pOF brightness\n", np);
 
 	/* Set initial color and cache it */
 	ret = omnia_led_send_color_cmd(client, led);
-	if (ret < 0) {
-		dev_err(dev, "Cannot set LED %pOF initial color: %i\n", np,
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot set LED %pOF initial color\n", np);
 
 	ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev,
 							&init_data);
-	if (ret < 0) {
-		dev_err(dev, "Cannot register LED %pOF: %i\n", np, ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot register LED %pOF\n", np);
 
 	return 1;
 }
@@ -433,13 +423,10 @@ static int omnia_leds_probe(struct i2c_client *client)
 	int ret, count;
 
 	count = of_get_available_child_count(np);
-	if (!count) {
-		dev_err(dev, "LEDs are not defined in device tree!\n");
-		return -ENODEV;
-	} else if (count > OMNIA_BOARD_LEDS) {
-		dev_err(dev, "Too many LEDs defined in device tree!\n");
-		return -EINVAL;
-	}
+	if (count == 0)
+		return dev_err_probe(dev, -ENODEV, "LEDs are not defined in device tree!\n");
+	if (count > OMNIA_BOARD_LEDS)
+		return dev_err_probe(dev, -EINVAL, "Too many LEDs defined in device tree!\n");
 
 	leds = devm_kzalloc(dev, struct_size(leds, leds, count), GFP_KERNEL);
 	if (!leds)
@@ -449,11 +436,8 @@ static int omnia_leds_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, leds);
 
 	ret = omnia_mcu_get_features(client);
-	if (ret < 0) {
-		dev_err(dev, "Cannot determine MCU supported features: %d\n",
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot determine MCU supported features\n");
 
 	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
 
@@ -468,10 +452,8 @@ static int omnia_leds_probe(struct i2c_client *client)
 	mutex_init(&leds->lock);
 
 	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
-	if (ret < 0) {
-		dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Cannot register private LED trigger\n");
 
 	led = &leds->leds[0];
 	for_each_available_child_of_node_scoped(np, child) {
Signature · 1 line
2.45.2
author maintainer
#15 lore raw

PATCH v4 11/12 leds: turris-omnia: Use uppercase first letter in all comments

In reply to Marek Behún

Change first letter of 4 more comments to uppercase to make the driver comments uniform.

---
 drivers/leds/leds-turris-omnia.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/leds/leds-turris-omnia.c +4 -4
index 515ba2991cf5..326958e099c9 100644
@@ -253,13 +253,13 @@ static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	 */
 	cdev->default_trigger = omnia_hw_trigger.name;
 
-	/* put the LED into software mode */
+	/* Put the LED into software mode */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
 							     OMNIA_CMD_LED_MODE_USER);
 	if (ret)
 		return dev_err_probe(dev, ret, "Cannot set LED %pOF to software mode\n", np);
 
-	/* disable the LED */
+	/* Disable the LED */
 	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
 	if (ret)
 		return dev_err_probe(dev, ret, "Cannot set LED %pOF brightness\n", np);
@@ -482,10 +482,10 @@ static void omnia_leds_remove(struct i2c_client *client)
 	if (leds->brightness_knode)
 		sysfs_put(leds->brightness_knode);
 
-	/* put all LEDs into default (HW triggered) mode */
+	/* Put all LEDs into default (HW triggered) mode */
 	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
-	/* set all LEDs color to [255, 255, 255] */
+	/* Set all LEDs color to [255, 255, 255] */
 	omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);
 }
 
Signature · 1 line
2.45.2
author maintainer
#16 lore raw

PATCH v4 12/12 ARM: dts: turris-omnia: Add global LED brightness change interrupt

In reply to Marek Behún

When global LED brightness is changed by pressing the front button on Turris Omnia, the MCU can produce an interrupt to the CPU. Add the description of this interrupt to the LED controller node.

---
 arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +1 -0
index 43202890c959..83fe00abd652 100644
@@ -251,6 +251,7 @@ mcu: system-controller@2a {
 			led-controller@2b {
 				compatible = "cznic,turris-omnia-leds";
 				reg = <0x2b>;
+				interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "okay";
Signature · 1 line
2.45.2