Constant noise on HDA ALC275
Hi there,
I've an HDA based chipset in a new Sony Vaio Z (Ivy Bridge). As sound as the system starts and the sound module are loaded, there's a constant noise (shhhhhhht) in the speakers. The noise change a bit if I toggle the mute button, but it's still there.
This noise stops as sound as I plug something in the jack port.
I've tried to play with HDA Analyzer¹, but I've no clue what to look for, so any hint appreciated.
Some information:
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
% aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC275 Analog [ALC275 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
% lsmod | grep sndsnd_hda_codec_hdmi 30783 1snd_hda_codec_realtek 50906 1
snd_hda_intel 26504 3 snd_hda_codec 83533 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13186 1 snd_hda_codec snd_pcm 64080 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 12969 2 snd_pcm,snd_hda_intel snd_seq 45130 0 snd_seq_device 13176 1 snd_seq snd_timer 22917 2 snd_pcm,snd_seq snd 53077 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device soundcore 13026 1 snd
/proc/asound/card0/codec#0
==========================
/proc/asound/card0/codec#3
==========================
¹ http://www.alsa-project.org/main/index.php/HDA_Analyzer
Signature · 3 lines
Julien Danjou # Free Software hacker & freelance # http://julien.danjou.info
At Sat, 15 Sep 2012 14:57:33 +0200,
Quoted 9 lines · Julien Danjou
Hi there,
I've an HDA based chipset in a new Sony Vaio Z (Ivy Bridge). As sound as the system starts and the sound module are loaded, there's a constant noise (shhhhhhht) in the speakers. The noise change a bit if I toggle the mute button, but it's still there.
This noise stops as sound as I plug something in the jack port.
Do you mean the headphone, or any jacks no matter input or output? Also do you get the noise from the headphone output?
In anyway, please give alsa-info.sh output (run with --no-upload option). This will cover more wide range of information.
Last but not least, try the latest kernel (3.6-rc6) if not tried yet :)
Takashi
On Fri, Sep 21 2012, Takashi Iwai wrote:
Hi,
Quoted 8 lines
Quoted 6 lines
I've an HDA based chipset in a new Sony Vaio Z (Ivy Bridge). As sound as the system starts and the sound module are loaded, there's a constant noise (shhhhhhht) in the speakers. The noise change a bit if I toggle the mute button, but it's still there.
This noise stops as sound as I plug something in the jack port.
Do you mean the headphone, or any jacks no matter input or output?
Anything, external speaker, headphones with or without mic. When I plug something, the noise from the speaker just stops.
I just discoveredtThere's an exception: if a jack is plugged, and if I set "Auto-Mute mode" to "disabled" in alsamixer the noise can be heared. If I set "Auto-Mute mode" back to "enabled", no more noise.
Quoted 1 line
Also do you get the noise from the headphone output?
Never. It's really only the integrated speakers emitting something.
Quoted 2 lines
In anyway, please give
alsa-info.shoutput (run with --no-upload option). This will cover more wide range of information.
Attached.
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.61
!!################################
!!Script ran on: Fri Sep 21 12:42:17 UTC 2012
!!Linux Distribution
!!------------------
Debian GNU/Linux wheezy/sid \n \l PRETTY_NAME="Debian GNU/Linux wheezy/sid" NAME="Debian GNU/Linux" ID=debian
!!DMI Information
!!---------------
Manufacturer: Sony Corporation Product Name: SVZ1311C5E Product Version: J004SF49 Firmware Version: R0092C6
!!Kernel Information
!!------------------
Kernel release: 3.5-trunk-amd64 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.25 Library version: 1.0.25 Utilities version: 1.0.25
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd7400000 irq 44
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:1b.0 0403: 8086:1e20 (rev 04)
Subsystem: 104d:90a5
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1 bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC275
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0275
Subsystem Id: 0x104d6600
Revision Id: 0x100008
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC275 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x3f, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x2f 0x2f]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x3f, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x11, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x90 0x90]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x24Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x11, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x90 0x90]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x0b 0x0b]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x80]
Connection: 2
0x0c 0x0d
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Switch", index=0, device=0
Control: name="Capture Volume", index=0, device=0
Device: name="ALC275 Analog", type="Audio", device=0 Amp-In caps: ofs=0x11, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x14 0x14]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a60120: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40050d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0421101f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x16 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x22: IN VREF_GRD
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x411110f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=64
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x12* 0x13
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x104d6600
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---T+ 1 root audio 116, 7 Sep 15 14:19 /dev/snd/controlC0 crw-rw---T+ 1 root audio 116, 6 Sep 15 14:19 /dev/snd/hwC0D0 crw-rw---T+ 1 root audio 116, 5 Sep 15 14:19 /dev/snd/hwC0D3 crw-rw---T+ 1 root audio 116, 4 Sep 19 11:43 /dev/snd/pcmC0D0c crw-rw---T+ 1 root audio 116, 3 Sep 21 14:19 /dev/snd/pcmC0D0p crw-rw---T+ 1 root audio 116, 2 Sep 15 14:19 /dev/snd/pcmC0D3p crw-rw---T+ 1 root audio 116, 1 Sep 15 14:19 /dev/snd/seq
crw-rw---T+ 1 root audio 116, 33 Sep 15 14:19 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Sep 15 14:19 .
drwxr-xr-x 3 root root 220 Sep 15 14:19 ..
lrwxrwxrwx 1 root root 12 Sep 15 14:19 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC275 Analog [ALC275 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC275 Analog [ALC275 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xd7400000 irq 44'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0275,104d6600,00100008 HDA:80862806,104d6600,00100000'
Controls : 21
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 48 [75%] [-16.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 63 [98%] [0.00dB] [on]
Front Right: Playback 63 [98%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-63.00dB] [off]
Front Right: Playback 0 [0%] [-63.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 11 [35%] [-18.00dB] [on]
Front Right: Playback 11 [35%] [-18.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 20 [43%] [3.00dB] [on]
Front Right: Capture 20 [43%] [3.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6300
dbmax 100
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6300
dbmax 100
dbvalue.0 -6300
dbvalue.1 -6300
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Mic Boost Volume'
value.0 2
value.1 2
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 2000
dbvalue.1 2000
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Capture Volume'
value.0 20
value.1 20
comment {
access 'read write'
type INTEGER
count 2
range '0 - 46'
dbmin -1700
dbmax 2900
dbvalue.0 300
dbvalue.1 300
}
}
control.9 {
iface MIXER
name 'Beep Playback Volume'
value.0 11
value.1 11
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -1800
dbvalue.1 -1800
}
}
control.10 {
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.11 {
iface MIXER
name 'Master Playback Volume'
value 48
comment {
access 'read write'
type INTEGER
count 1
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -1600
}
}
control.12 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Headphone Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.18 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface PCM
device 3
name ELD
value '100009006a105e01000000000000000026cd0d56504c45323430374844530907010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type BYTES
count 83
}
}
control.20 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.21 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulenls_utf8nls_cp437
vfat
fathid_genericusb_storage
uasipt_MASQUERADEiptable_natnf_natnf_conntrack_ipv4nf_defrag_ipv4nf_conntrackip6table_filterip6_tablesiptable_filterip_tablesebtable_nat
ebtablesx_tablesparport_pc
ppdev
lp
parport
bnep
rfcomm
bluetoothcpufreq_powersavepci_stubcpufreq_userspace
vboxpcicpufreq_statscpufreq_conservative
vboxnetadp
vboxnetflt
vboxdrvbinfmt_misc
uinput
nfsd
nfsnfs_aclauth_rpcgss
fscache
lockd
sunrpc
loop
fusesnd_hda_codec_hdmisnd_hda_codec_realtektpm_infineon
uvcvideovideobuf2_vmallocvideobuf2_memopsvideobuf2_core
videodev
media
joydev
arc4
coretempkvm_intelsnd_hda_intel
kvmsnd_hda_codecsnd_hwdepsnd_pcmsnd_page_allocsnd_seqsnd_seq_device
psmouseacpi_cpufreq
batterysnd_timerserio_raw
microcode
pcspkri2c_i801tpm_tis
iwlwifi
tpm
sndtpm_bios
mac80211sony_laptop
mperfrts_pstor
cfg80211
rfkill
soundcorelpc_ichmfd_core
evdev
processor
ac
ext4
crc16
jbd2
mbcachesha256_genericdm_cryptdm_mod
raid0md_modhid_logitech_dj
usbhid
hid
sgsd_modcrc_t10difcrc32c_intelghash_clmulni_intelaesni_intel
i915
ahci
libahciaes_x86_64
libataehci_hcdaes_generic
cryptd
r8169
miiscsi_mod
usbcore
video
buttoni2c_algo_bitusb_commondrm_kms_helper
drmi2c_core
thermalthermal_sys
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x12 0x90a601200x13 0x411111f00x14 0x901701100x15 0x0421101f0x16 0x411111f00x18 0x411111f00x19 0x411111f00x1a 0x411111f00x1b 0x411111f00x1d 0x411111f00x1e 0x411110f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:0x05 0x185600100x06 0x585600f00x07 0x585600f0
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
!!--------------
[332064.706938] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [332064.706954] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [332064.706967] ahci 0000:00:1f.2: setting latency timer to 64 -- [355387.645103] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [355387.645179] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [355387.645243] ehci_hcd 0000:00:1d.0: setting latency timer to 64 -- [480708.869417] r8169 0000:05:00.0: wake-up capability disabled by ACPI [480708.869424] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [480708.907221] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off -- [490572.893698] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [490572.893709] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [490572.893725] ahci 0000:00:1f.2: setting latency timer to 64
Quoted 2 lines
Last but not least, try the latest kernel (3.6-rc6) if not tried yet :)
I think I forgot to say, I'm running Linux 3.5 indeed. I've tried 3.6-rc1 a couple of weeks ago, and it didn't help. But I'd try rc6 if it has changes that can be related. :)
Thanks for your help!
Signature · 3 lines
Julien Danjou -- Free Software hacker & freelance -- http://julien.danjou.info
At Fri, 21 Sep 2012 14:43:19 +0200,
Quoted 12 lines · Julien Danjou
On Fri, Sep 21 2012, Takashi Iwai wrote:
Hi,
Quoted 7 lines
Quoted 6 lines
I've an HDA based chipset in a new Sony Vaio Z (Ivy Bridge). As sound as the system starts and the sound module are loaded, there's a constant noise (shhhhhhht) in the speakers. The noise change a bit if I toggle the mute button, but it's still there.
This noise stops as sound as I plug something in the jack port.
Quoted 8 lines
Quoted 1 line
Do you mean the headphone, or any jacks no matter input or output?
Anything, external speaker, headphones with or without mic. When I plug something, the noise from the speaker just stops.
I just discoveredtThere's an exception: if a jack is plugged, and if I set "Auto-Mute mode" to "disabled" in alsamixer the noise can be heared. If I set "Auto-Mute mode" back to "enabled", no more noise.
Well, it means that the noise disappears when the speaker pin is disabled. It's logical.
But my question was: if you plug to an external mic jack and leave the headphone jack, the speaker noise is still there, right?
Quoted 8 lines
Quoted 1 line
Also do you get the noise from the headphone output?
Never. It's really only the integrated speakers emitting something.
Quoted 2 lines
In anyway, please give
alsa-info.shoutput (run with --no-upload option). This will cover more wide range of information.Attached.
Turning EAPD on/off on node 0x14 makes difference?
Takashi
Quoted 2 lines · Takashi Iwai
But my question was: if you plug to an external mic jack and leave the headphone jack, the speaker noise is still there, right?
Oh. If I understand correctly you're talking about 2 jacks, but there's only one jack on this laptop, doing both mic and speaker.
Quoted 1 line
Turning EAPD on/off on node
0x14makes difference?
Yes, turning it off makes the noise disappear. But I can't hear anything, e.g. playing music makes no sound unless I turn it back on. :)
(note that this may be obvious to you, but I don't understand what's EAPD on 0x14 so I'm just explaining what I hear ;-)
Signature · 3 lines
Julien Danjou // Free Software hacker & freelance // http://julien.danjou.info
At Fri, 21 Sep 2012 15:14:35 +0200,
Quoted 9 lines · Julien Danjou
[1 <text/plain (quoted-printable)>]
Quoted 2 lines · Takashi Iwai
But my question was: if you plug to an external mic jack and leave the headphone jack, the speaker noise is still there, right?
Oh. If I understand correctly you're talking about 2 jacks, but there's only one jack on this laptop, doing both mic and speaker.
I see.
Quoted 7 lines
Quoted 1 line
Turning EAPD on/off on node
0x14makes difference?Yes, turning it off makes the noise disappear. But I can't hear anything, e.g. playing music makes no sound unless I turn it back on. :)
(note that this may be obvious to you, but I don't understand what's EAPD on
0x14so I'm just explaining what I hear ;-)
It's something like:
hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x00 to turn off, and hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x02
to turn on.
Also, try to mute all sources in NID 0x0b,
hda-verb /dev/snd/hw0D0 0x0b SET_AMP 0x7480
Takashi
Quoted 3 lines · Takashi Iwai
It's something like:
hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x00to turn off, and
This completely shuts down the speaker: no noise, but no sound at all if I play something.
Quoted 2 lines
hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x02to turn on.
That makes it back to normal, with noise. :)
Quoted 2 lines
Also, try to mute all sources in NID
0x0b,hda-verb /dev/snd/hw0D0 0x0b SET_AMP 0x7480
This seems to not change anything at all.
Signature · 3 lines
Julien Danjou ;; Free Software hacker & freelance ;; http://julien.danjou.info
At Fri, 21 Sep 2012 15:37:40 +0200,
Quoted 13 lines · Julien Danjou
Quoted 3 lines · Takashi Iwai
It's something like:
hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x00to turn off, and
This completely shuts down the speaker: no noise, but no sound at all if I play something.
Quoted 2 lines
hda-verb /dev/snd/hw0D0 0x14 SET_EAPD 0x02to turn on.
Quoted 6 lines
That makes it back to normal, with noise. :)
Quoted 2 lines
Also, try to mute all sources in NID
0x0b,hda-verb /dev/snd/hw0D0 0x0b SET_AMP 0x7480This seems to not change anything at all.
OK, then could you give the alsa-info.sh output at the state where the speaker makes noise? The one you attached is apparently without the speaker.
Takashi
Quoted 3 lines · Takashi Iwai
OK, then could you give the
alsa-info.shoutput at the state where the speaker makes noise? The one you attached is apparently without the speaker.
Sure, attached. Nothing plugged in the jack, and I hear the noise.
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.61
!!################################
!!Script ran on: Fri Sep 21 14:07:29 UTC 2012
!!Linux Distribution
!!------------------
Debian GNU/Linux wheezy/sid \n \l PRETTY_NAME="Debian GNU/Linux wheezy/sid" NAME="Debian GNU/Linux" ID=debian
!!DMI Information
!!---------------
Manufacturer: Sony Corporation Product Name: SVZ1311C5E Product Version: J004SF49 Firmware Version: R0092C6
!!Kernel Information
!!------------------
Kernel release: 3.5-trunk-amd64 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.25 Library version: 1.0.25 Utilities version: 1.0.25
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd7400000 irq 44
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------
00:1b.0 0403: 8086:1e20 (rev 04)
Subsystem: 104d:90a5
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2snd_usb_audio: index=-2snd_atiixp_modem: index=-2snd_intel8x0m: index=-2snd_via82xx_modem: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1 bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC275
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0275
Subsystem Id: 0x104d6600
Revision Id: 0x100008
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC275 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x3f, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x18 0x18]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x3f, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x18 0x18]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x11, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x90 0x90]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x24Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x11, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x90 0x90]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1dNode 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x80]
Connection: 2
0x0c 0x0d
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Switch", index=0, device=0
Control: name="Capture Volume", index=0, device=0
Device: name="ALC275 Analog", type="Audio", device=0 Amp-In caps: ofs=0x11, nsteps=0x2e, stepsize=0x03, mute=1 Amp-In vals: [0x14 0x14]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a60120: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x14 [Pin Complex] wcaps 0x40050d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010050: OUT EAPD Balanced
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*
Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0421101f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x16 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x22: IN VREF_GRD
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0dNode 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x411110f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=64
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x12* 0x13
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x104d6600
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3 Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---T+ 1 root audio 116, 7 Sep 15 14:19 /dev/snd/controlC0 crw-rw---T+ 1 root audio 116, 6 Sep 15 14:19 /dev/snd/hwC0D0 crw-rw---T+ 1 root audio 116, 5 Sep 15 14:19 /dev/snd/hwC0D3 crw-rw---T+ 1 root audio 116, 4 Sep 19 11:43 /dev/snd/pcmC0D0c crw-rw---T+ 1 root audio 116, 3 Sep 21 15:49 /dev/snd/pcmC0D0p crw-rw---T+ 1 root audio 116, 2 Sep 15 14:19 /dev/snd/pcmC0D3p crw-rw---T+ 1 root audio 116, 1 Sep 15 14:19 /dev/snd/seq
crw-rw---T+ 1 root audio 116, 33 Sep 15 14:19 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Sep 15 14:19 .
drwxr-xr-x 3 root root 220 Sep 15 14:19 ..
lrwxrwxrwx 1 root root 12 Sep 15 14:19 pci-0000:00:1b.0 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC275 Analog [ALC275 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC275 Analog [ALC275 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xd7400000 irq 44'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0275,104d6600,00100008 HDA:80862806,104d6600,00100000'
Controls : 21
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 25 [39%] [-39.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 63 [98%] [0.00dB] [on]
Front Right: Playback 63 [98%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 63 [98%] [0.00dB] [on]
Front Right: Playback 63 [98%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [0.40dB]
Front Right: Playback 253 [99%] [0.40dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 11 [35%] [-18.00dB] [on]
Front Right: Playback 11 [35%] [-18.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 46
Front Left: Capture 20 [43%] [3.00dB] [on]
Front Right: Capture 20 [43%] [3.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6300
dbmax 100
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 63
value.1 63
comment {
access 'read write'
type INTEGER
count 2
range '0 - 64'
dbmin -6300
dbmax 100
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Mic Boost Volume'
value.0 2
value.1 2
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 2000
dbvalue.1 2000
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Capture Volume'
value.0 20
value.1 20
comment {
access 'read write'
type INTEGER
count 2
range '0 - 46'
dbmin -1700
dbmax 2900
dbvalue.0 300
dbvalue.1 300
}
}
control.9 {
iface MIXER
name 'Beep Playback Volume'
value.0 11
value.1 11
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -1800
dbvalue.1 -1800
}
}
control.10 {
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.11 {
iface MIXER
name 'Master Playback Volume'
value 25
comment {
access 'read write'
type INTEGER
count 1
range '0 - 64'
dbmin -6400
dbmax 0
dbvalue.0 -3900
}
}
control.12 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.18 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.19 {
iface PCM
device 3
name ELD
value '100009006a105e01000000000000000026cd0d56504c45323430374844530907010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type BYTES
count 83
}
}
control.20 {
iface MIXER
name 'PCM Playback Volume'
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
control.21 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
}
}
}--endcollapse--
!!All Loaded Modules
!!------------------
Modulenls_utf8nls_cp437
vfat
fathid_genericusb_storage
uasipt_MASQUERADEiptable_natnf_natnf_conntrack_ipv4nf_defrag_ipv4nf_conntrackip6table_filterip6_tablesiptable_filterip_tablesebtable_nat
ebtablesx_tablesparport_pc
ppdev
lp
parport
bnep
rfcomm
bluetoothcpufreq_powersavepci_stubcpufreq_userspace
vboxpcicpufreq_statscpufreq_conservative
vboxnetadp
vboxnetflt
vboxdrvbinfmt_misc
uinput
nfsd
nfsnfs_aclauth_rpcgss
fscache
lockd
sunrpc
loop
fusesnd_hda_codec_hdmisnd_hda_codec_realtektpm_infineon
uvcvideovideobuf2_vmallocvideobuf2_memopsvideobuf2_core
videodev
media
joydev
arc4
coretempkvm_intelsnd_hda_intel
kvmsnd_hda_codecsnd_hwdepsnd_pcmsnd_page_allocsnd_seqsnd_seq_device
psmouseacpi_cpufreq
batterysnd_timerserio_raw
microcode
pcspkri2c_i801tpm_tis
iwlwifi
tpm
sndtpm_bios
mac80211sony_laptop
mperfrts_pstor
cfg80211
rfkill
soundcorelpc_ichmfd_core
evdev
processor
ac
ext4
crc16
jbd2
mbcachesha256_genericdm_cryptdm_mod
raid0md_modhid_logitech_dj
usbhid
hid
sgsd_modcrc_t10difcrc32c_intelghash_clmulni_intelaesni_intel
i915
ahci
libahciaes_x86_64
libataehci_hcdaes_generic
cryptd
r8169
miiscsi_mod
usbcore
video
buttoni2c_algo_bitusb_commondrm_kms_helper
drmi2c_core
thermalthermal_sys
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:0x12 0x90a601200x13 0x411111f00x14 0x901701100x15 0x0421101f0x16 0x411111f00x18 0x411111f00x19 0x411111f00x1a 0x411111f00x1b 0x411111f00x1d 0x411111f00x1e 0x411110f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:0x05 0x185600100x06 0x585600f00x07 0x585600f0
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
!!--------------
[332064.706938] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [332064.706954] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [332064.706967] ahci 0000:00:1f.2: setting latency timer to 64 -- [355387.645103] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [355387.645179] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [355387.645243] ehci_hcd 0000:00:1d.0: setting latency timer to 64 -- [480708.869417] r8169 0000:05:00.0: wake-up capability disabled by ACPI [480708.869424] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [480708.907221] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off -- [490572.893698] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [490572.893709] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [490572.893725] ahci 0000:00:1f.2: setting latency timer to 64
Signature · 4 lines
-- Julien Danjou ;; Free Software hacker & freelance ;; http://julien.danjou.info
At Fri, 21 Sep 2012 16:08:20 +0200,
Quoted 8 lines · Julien Danjou
Quoted 3 lines · Takashi Iwai
OK, then could you give the
alsa-info.shoutput at the state where the speaker makes noise? The one you attached is apparently without the speaker.Sure, attached. Nothing plugged in the jack, and I hear the noise.
Thanks. The DAC paths look good to me.
What happens if you load snd-hda-intel module with model="nofixup" option?
Takashi
Quoted 3 lines · Takashi Iwai
Thanks. The DAC paths look good to me.
What happens if you load snd-hda-intel module with model="nofixup" option?
It doesn't change anything.
FWIW, I did the following:
# rmmod snd-hda-intel (noise still here) # modprobe snd-hda-intel model=nofixup (speakers are silent for 1 sec, then modprobe returns and noise is back) # rmmod snd-hda-intel (noise still here) # modprobe snd-hda-intel (speakers are silent for 1 sec, then modprobe returns and noise is back)
Signature · 3 lines
Julien Danjou ;; Free Software hacker & freelance ;; http://julien.danjou.info
At Fri, 21 Sep 2012 17:29:09 +0200,
Quoted 11 lines · Julien Danjou
Quoted 3 lines · Takashi Iwai
Thanks. The DAC paths look good to me.
What happens if you load snd-hda-intel module with model="nofixup" option?It doesn't change anything.
FWIW, I did the following:
Quoted 8 lines
# rmmod snd-hda-intel (noise still here) # modprobe snd-hda-intel model=nofixup (speakers are silent for 1 sec, then modprobe returns and noise is back) # rmmod snd-hda-intel (noise still here) # modprobe snd-hda-intel (speakers are silent for 1 sec, then modprobe returns and noise is back)
Hm then I have no more clue. Sony must have done something weird...
Takashi
Quoted 1 line · Takashi Iwai
Hm then I have no more clue. Sony must have done something weird...
Too bad, but thanks a lot anyway for your help!
Signature · 3 lines
Julien Danjou -- Free Software hacker & freelance -- http://julien.danjou.info
At Fri, 21 Sep 2012 17:55:18 +0200,
Quoted 6 lines · Julien Danjou
Quoted 1 line · Takashi Iwai
Hm then I have no more clue. Sony must have done something weird...
Too bad, but thanks a lot anyway for your help!
One last thing I'd try is to disable the analog loopback path
hda-verb /dev/snd/hwC0D0 0x0d SET_AMP 0x7180
Other than that, only insane things like setting VREF to the output pin (e.g. Apple machines need it) or trying some COEF used for other devices.
Takashi
Quoted 3 lines · Takashi Iwai
One last thing I'd try is to disable the analog loopback path
hda-verb /dev/snd/hwC0D0 0x0d SET_AMP 0x7180
Woh, that does something! The noise is now different, it's a lot more "piercing". It was shhhhhhht now it's hiiiiiiiiiii.
Signature · 3 lines
Julien Danjou ;; Free Software hacker & freelance ;; http://julien.danjou.info
Hi Takashi,
Thanks for your help so far! I just spent some time playing with hda-analyzer, and found something interesting. Excuse me in advance, I don't really know and understand what I'm talking about, so I'll try to be the more clear I can.
I managed to make the weird sound disappear in one case: when the speakers are not muted, which is at least a good start. All I have to do, it to uncheck the mute buttons of val[8] and val[9] in "Node 0x0b AUD_MIX" and let their value to 0.
By the way, changing the value of val[8] to something between 1 and 31 makes a different sound. Changing value of val[9] makes not effect
Does that ring a bell to you, or could you translate this to me? :)
Thanks a lot for your time,
Best,
Signature · 3 lines
Julien Danjou # Free Software hacker & freelance # http://julien.danjou.info
At Thu, 04 Oct 2012 15:56:55 +0200,
Quoted 8 lines · Julien Danjou
Hi Takashi,
Thanks for your help so far! I just spent some time playing with hda-analyzer, and found something interesting. Excuse me in advance, I don't really know and understand what I'm talking about, so I'll try to be the more clear I can.
Quoted 8 lines
I managed to make the weird sound disappear in one case: when the speakers are not muted, which is at least a good start. All I have to do, it to uncheck the mute buttons of val[8] and val[9] in "Node
0x0bAUD_MIX" and let their value to 0.
By the way, changing the value of val[8] to something between 1 and 31 makes a different sound. Changing value of val[9] makes not effectDoes that ring a bell to you, or could you translate this to me? :)
At best, please give alsa-info.sh outputs at both working and non-working cases. In that way, we can see the internal states more exactly than ambiguous descriptions.
thanks,
Takashi
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Mon, 08 Oct 2012 14:46:24 +0200,
Quoted 25 lines · Julien Danjou
[1 <multipart/mixed (7bit)>]
[1.1 <text/plain (quoted-printable)>]Quoted 3 lines · Takashi Iwai
At best, please give
alsa-info.shoutputs at both working and non-working cases. In that way, we can see the internal states more exactly than ambiguous descriptions.Sure! Both attached.
The diff between background-noise and no-background-noise is:
tmp/alsa-info-no-background-noise.txt renamed from tmp/alsa-info-background-noise.txt +1
-1@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 12:41:05 UTC 2012 +!!Script ran on: Mon Oct 8 12:42:24 UTC 2012 !!Linux Distribution
tmp/alsa-info-no-background-noise.txt line 203
Quoted 7 lines
tmp/alsa-info-no-background-noise.txt renamed from tmp/alsa-info-background-noise.txt +1
-1@@ -198,7 +198,7 @@ Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d
It's interesting. So, _unmuting_ the input from NID 0x1d removes the noise? (0x80 means the channel is muted.)
Takashi
Quoted 2 lines · Takashi Iwai
It's interesting. So, _unmuting_ the input from NID
0x1dremoves the noise? (0x80means the channel is muted.)
Yes, that's it.
(I just unloaded and reloaded the module and rechecked).
Signature · 3 lines
Julien Danjou -- Free Software hacker & freelance -- http://julien.danjou.info
At Mon, 08 Oct 2012 14:57:23 +0200,
Quoted 9 lines · Julien Danjou
Quoted 2 lines · Takashi Iwai
It's interesting. So, _unmuting_ the input from NID
0x1dremoves the noise? (0x80means the channel is muted.)Yes, that's it.
(I just unloaded and reloaded the module and rechecked).
OK, then could you try the patch below?
Takashi
---
sound/pci/hda/patch_realtek.c +19 -0
@@ -5988,10 +5988,22 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec, } } +static void alc275_fixup_vaio_mixer (struct hda_codec *codec, +const struct alc_fixup *fix,int action) +{ +/* _UN_muting the input from NID 0x1d fixes the mysterious speaker +* noise on Sony VAIO Z +*/ +if (action ==ALC_FIXUP_ACT_INIT ) +snd_hda_codec_write (codec,0x0b ,0 , +AC_VERB_SET_AMP_GAIN_MUTE , +AMP_IN_UNMUTE (4 )); +}enum {ALC269_FIXUP_SONY_VAIO ,ALC275_FIXUP_SONY_VAIO_GPIO2 , +ALC275_FIXUP_SONY_VAIO_MIXER ,ALC269_FIXUP_DELL_M101Z ,ALC269_FIXUP_SKU_IGNORE ,ALC269_FIXUP_ASUS_G73JW ,
@@ -6031,6 +6043,12 @@ static const struct alc_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_SONY_VAIO }, + [ALC275_FIXUP_SONY_VAIO_MIXER] = { + .type = ALC_FIXUP_FUNC, + .v.func = alc275_fixup_vaio_mixer, + .chained = true, + .chain_id =ALC269_FIXUP_SONY_VAIO + }, [ALC269_FIXUP_DELL_M101Z] = { .type = ALC_FIXUP_VERBS, .v.verbs = (const struct hda_verb []) {
@@ -6172,6 +6190,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x104d ,0x9073 ,"Sony VAIO" ,ALC275_FIXUP_SONY_VAIO_GPIO2 ),SND_PCI_QUIRK (0x104d ,0x907b ,"Sony VAIO" ,ALC275_FIXUP_SONY_HWEQ ),SND_PCI_QUIRK (0x104d ,0x9084 ,"Sony VAIO" ,ALC275_FIXUP_SONY_HWEQ ), +SND_PCI_QUIRK (0x104d ,0x90a5 ,"Sony VAIO Z" ,ALC275_FIXUP_SONY_VAIO_MIXER ),SND_PCI_QUIRK_VENDOR (0x104d ,"Sony VAIO" ,ALC269_FIXUP_SONY_VAIO ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
Quoted 27 lines · Takashi Iwai
At Mon, 08 Oct 2012 14:57:23 +0200,
Quoted 9 lines · Julien Danjou
Quoted 2 lines · Takashi Iwai
It's interesting. So, _unmuting_ the input from NID
0x1dremoves the noise? (0x80means the channel is muted.)Yes, that's it.
(I just unloaded and reloaded the module and rechecked).
OK, then could you try the patch below?
Takashi
---
sound/pci/hda/patch_realtek.c +1
-0@@ -5988,10 +5988,22 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec, } } +static void alc275_fixup_vaio_mixer(struct hda_codec *codec,
sound/pci/hda/patch_realtek.c static void alc269_fixup_mic2_mute(struct hda_codec *codec, · line 6001
Quoted 10 lines
sound/pci/hda/patch_realtek.c +10
-0+ const struct alc_fixup *fix, int action) +{ +/* _UN_muting the input from NID 0x1d fixes the mysterious speaker +* noise on Sony VAIO Z +*/ +if (action ==ALC_FIXUP_ACT_INIT ) +snd_hda_codec_write (codec,0x0b ,0 , +AC_VERB_SET_AMP_GAIN_MUTE , +AMP_IN_UNMUTE (4 )); +}
Hmm, isn't it easier just to toggle "Beep Playback Switch"?
Signature · 2 lines
David Henningsson, Canonical Ltd. https://launchpad.net/~diwic
At Mon, 08 Oct 2012 16:39:35 +0200,
Quoted 28 lines · David Henningsson
Quoted 26 lines · Takashi Iwai
At Mon, 08 Oct 2012 14:57:23 +0200,
Quoted 9 lines · Julien Danjou
Quoted 2 lines · Takashi Iwai
It's interesting. So, _unmuting_ the input from NID
0x1dremoves the noise? (0x80means the channel is muted.)Yes, that's it.
(I just unloaded and reloaded the module and rechecked).
OK, then could you try the patch below?
Takashi
---
sound/pci/hda/patch_realtek.c +0
-0@@ -5988,10 +5988,22 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec, } }
Quoted 13 lines
sound/pci/hda/patch_realtek.c static void alc269_fixup_mic2_mute(struct hda_codec *codec, · line 6001
Quoted 11 lines
sound/pci/hda/patch_realtek.c +11
-0+static void alc275_fixup_vaio_mixer (struct hda_codec *codec, +const struct alc_fixup *fix,int action) +{ +/* _UN_muting the input from NID 0x1d fixes the mysterious speaker +* noise on Sony VAIO Z +*/ +if (action ==ALC_FIXUP_ACT_INIT ) +snd_hda_codec_write (codec,0x0b ,0 , +AC_VERB_SET_AMP_GAIN_MUTE , +AMP_IN_UNMUTE (4 )); +}Hmm, isn't it easier just to toggle "Beep Playback Switch"?
Good point. I'm actually not sure whether the 0x1d is supposed to be beep on ALC275 as well. It's been so for ALC269, but ALC275 might be different.
Takashi
At Mon, 08 Oct 2012 17:07:44 +0200,
Quoted 45 lines · Takashi Iwai
At Mon, 08 Oct 2012 16:39:35 +0200,
Quoted 28 lines · David Henningsson
Quoted 26 lines · Takashi Iwai
At Mon, 08 Oct 2012 14:57:23 +0200,
Quoted 9 lines · Julien Danjou
Quoted 2 lines · Takashi Iwai
It's interesting. So, _unmuting_ the input from NID
0x1dremoves the noise? (0x80means the channel is muted.)Yes, that's it.
(I just unloaded and reloaded the module and rechecked).
OK, then could you try the patch below?
Takashi
---
sound/pci/hda/patch_realtek.c +0
-0@@ -5988,10 +5988,22 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec, } }Quoted 13 lines
sound/pci/hda/patch_realtek.c static void alc269_fixup_mic2_mute(struct hda_codec *codec, · line 6001
Quoted 11 lines
sound/pci/hda/patch_realtek.c +11
-0+static void alc275_fixup_vaio_mixer (struct hda_codec *codec, +const struct alc_fixup *fix,int action) +{ +/* _UN_muting the input from NID 0x1d fixes the mysterious speaker +* noise on Sony VAIO Z +*/ +if (action ==ALC_FIXUP_ACT_INIT ) +snd_hda_codec_write (codec,0x0b ,0 , +AC_VERB_SET_AMP_GAIN_MUTE , +AMP_IN_UNMUTE (4 )); +}Hmm, isn't it easier just to toggle "Beep Playback Switch"?
Quoted 3 lines
Good point. I'm actually not sure whether the
0x1dis supposed to be beep on ALC275 as well. It's been so for ALC269, but ALC275 might be different.
In other words: Julien, could you check whether beep volume from speaker/headphone changes when you adjust "Beep" volume in alsa mixer?
Takashi
Quoted 2 lines · Takashi Iwai
In other words: Julien, could you check whether beep volume from speaker/headphone changes when you adjust "Beep" volume in alsa mixer?
When you say beep volume from speaker/headphone, do you refer to what I call noise?
Because if yes, this is actually the case:
- if "Beep" muted -> noise :(
- if "Beep" unmuted and volume == 0 -> no noise :)
- if "Beep" unmuted and volume > 0 -> different type of noises! :(
Signature · 3 lines
Julien Danjou -- Free Software hacker & freelance -- http://julien.danjou.info
At Mon, 08 Oct 2012 17:41:02 +0200,
Quoted 8 lines · Julien Danjou
Quoted 2 lines · Takashi Iwai
In other words: Julien, could you check whether beep volume from speaker/headphone changes when you adjust "Beep" volume in alsa mixer?
When you say beep volume from speaker/headphone, do you refer to what I call noise?
No, not about noise but the system beep sound.
Such like
% echo -en "\a"
on Linux console.
Takashi
Quoted 12 lines
Because if yes, this is actually the case:
- if "Beep" muted -> noise :(
- if "Beep" unmuted and volume == 0 -> no noise :)
- if "Beep" unmuted and volume > 0 -> different type of noises! :(Signature · 4 lines
Julien Danjou -- Free Software hacker & freelance -- http://julien.danjou.info [2 <application/pgp-signature (7bit)>]
Quoted 4 lines · Takashi Iwai
No, not about noise but the system beep sound.
Such like% echo -en "\a"on Linux console.
Oh that. Yes, the volume I hear when echoing a '\a' change correctly when I change the beep volume in alsamixer.
(On a side note, I don't know how precise it should be, but setting the beep volume to 0 (but still unmuted) still does an audible beep.)
Signature · 3 lines
Julien Danjou -- Free Software hacker & freelance -- http://julien.danjou.info
At Mon, 08 Oct 2012 18:09:10 +0200,
Quoted 10 lines · Julien Danjou
Quoted 4 lines · Takashi Iwai
No, not about noise but the system beep sound.
Such like% echo -en "\a"on Linux console.
Oh that. Yes, the volume I hear when echoing a '\a' change correctly when I change the beep volume in alsamixer.
Thanks, it's good to know. So the current implementation of beep control itself is OK. The rest is to stop the mixer amp mute via Beep switch...
Quoted 2 lines
(On a side note, I don't know how precise it should be, but setting the beep volume to 0 (but still unmuted) still does an audible beep.)
It's normal behavior on many codecs. The lowest volume level doesn't mean the mute state.
Takashi
Quoted 1 line · Takashi Iwai
OK, then could you try the patch below?
The patch is not enough on itself, but it seems on a good track. As soon as the module is started, the noise starts for one second and stops.
The "Beep Playback Switch" is shown as muted in alsamixer. If I unmute it, well, no noise, as expected. If i re-mute it, the noise come back.
So this patch just works after module loading, but I guess that's to be expected if I understand the code correctly. :)
Signature · 3 lines
Julien Danjou // Free Software hacker & freelance // http://julien.danjou.info
At Mon, 08 Oct 2012 18:24:23 +0200,
Quoted 5 lines · Julien Danjou
Quoted 1 line · Takashi Iwai
OK, then could you try the patch below?
Quoted 8 lines
The patch is not enough on itself, but it seems on a good track. As soon as the module is started, the noise starts for one second and stops.
The "Beep Playback Switch" is shown as muted in alsamixer. If I unmute it, well, no noise, as expected. If i re-mute it, the noise come back.
So this patch just works after module loading, but I guess that's to be expected if I understand the code correctly. :)
Yep, as David pointed out, the beep control overrides the amp setup. And your previous result suggested that we shouldn't use this beep path either (except for unmuting it), otherwise you get a noise again.
So, the patch below is the revised version. It removes the beep control but still opens the path to NID 0x1d.
Let me know if this works better.
thanks,
Takashi
---
sound/pci/hda/patch_realtek.c +20 -0
@@ -4249,6 +4249,7 @@ static const struct snd_pci_quirk beep_white_list[] = {SND_PCI_QUIRK (0x1043 ,0x83ce ,"EeePC" ,1 ),SND_PCI_QUIRK (0x1043 ,0x831a ,"EeePC" ,1 ),SND_PCI_QUIRK (0x1043 ,0x834a ,"EeePC" ,1 ), +SND_PCI_QUIRK (0x104d ,0x90a5 ,"Sony VAIO Z" ,0 ),/* beep cause noise */ SND_PCI_QUIRK (0x1458 ,0xa002 ,"GA-MA790X" ,1 ), SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1), {}
@@ -5988,10 +5989,22 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec, } } +static void alc275_fixup_vaio_mixer (struct hda_codec *codec, +const struct alc_fixup *fix,int action) +{ +/* _UN_muting the input from NID 0x1d fixes the mysterious speaker +* noise on Sony VAIO Z +*/ +if (action ==ALC_FIXUP_ACT_INIT ) +snd_hda_codec_write (codec,0x0b ,0 , +AC_VERB_SET_AMP_GAIN_MUTE , +AMP_IN_UNMUTE (4 )); +}enum {ALC269_FIXUP_SONY_VAIO ,ALC275_FIXUP_SONY_VAIO_GPIO2 , +ALC275_FIXUP_SONY_VAIO_MIXER ,ALC269_FIXUP_DELL_M101Z ,ALC269_FIXUP_SKU_IGNORE ,ALC269_FIXUP_ASUS_G73JW ,
@@ -6031,6 +6044,12 @@ static const struct alc_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_SONY_VAIO }, + [ALC275_FIXUP_SONY_VAIO_MIXER] = { + .type = ALC_FIXUP_FUNC, + .v.func = alc275_fixup_vaio_mixer, + .chained = true, + .chain_id =ALC269_FIXUP_SONY_VAIO + }, [ALC269_FIXUP_DELL_M101Z] = { .type = ALC_FIXUP_VERBS, .v.verbs = (const struct hda_verb []) {
@@ -6172,6 +6191,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x104d ,0x9073 ,"Sony VAIO" ,ALC275_FIXUP_SONY_VAIO_GPIO2 ),SND_PCI_QUIRK (0x104d ,0x907b ,"Sony VAIO" ,ALC275_FIXUP_SONY_HWEQ ),SND_PCI_QUIRK (0x104d ,0x9084 ,"Sony VAIO" ,ALC275_FIXUP_SONY_HWEQ ), +SND_PCI_QUIRK (0x104d ,0x90a5 ,"Sony VAIO Z" ,ALC275_FIXUP_SONY_VAIO_MIXER ),SND_PCI_QUIRK_VENDOR (0x104d ,"Sony VAIO" ,ALC269_FIXUP_SONY_VAIO ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
Quoted 7 lines · Takashi Iwai
Yep, as David pointed out, the beep control overrides the amp setup. And your previous result suggested that we shouldn't use this beep path either (except for unmuting it), otherwise you get a noise again.
So, the patch below is the revised version. It removes the beep control but still opens the path to NID
0x1d.
It does remove the beep control, and I think it therefore break the beep
functionnality: I've no sound when echoing '\a'. But that's likely to be expected anyhow. :-/
But yeah, definitely, I've no noise anymore in this case with this patch.
Now, I can still make the noise come back when "speaker" or "master" is muted. This is definitely not a side effect of your patch, I just didn't raise it before.
This diff is between "no noise" (= just loaded the module with your patch) and "noise with master muted":
tmp/noise-master-mute.txt renamed from tmp/no-noise.txt +2 -2
@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 16:36:44 UTC 2012 +!!Script ran on: Mon Oct 8 16:37:02 UTC 2012 !!Linux Distribution
@@ -260,7 +260,7 @@ ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x00 0x00] + Amp-Out vals: [0x80 0x80] Pincap 0x00010050: OUT EAPD Balanced EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A
This diff is between "no noise" (= just loaded the module with your patch) and "noise with speaker muted":
tmp/noise-speaker-mute.txt renamed from tmp/no-noise.txt +2 -2
@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 16:36:44 UTC 2012 +!!Script ran on: Mon Oct 8 16:37:10 UTC 2012 !!Linux Distribution
@@ -260,7 +260,7 @@ ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x00 0x00] + Amp-Out vals: [0x80 0x80] Pincap 0x00010050: OUT EAPD Balanced EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Now, I've discovered one more thing, don't know if you know. This is how I managed to REALLY mute the speakers, the noise, everything (even playing a sound file with everything unmuted makes no sound):
% diff -u /tmp/sound.txt /tmp/no-sound-at-all.txt
tmp/no-sound-at-all.txt renamed from tmp/sound.txt +2 -2
@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 16:48:02 UTC 2012 +!!Script ran on: Mon Oct 8 16:47:50 UTC 2012 !!Linux Distribution
@@ -267,7 +267,7 @@ Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x40: OUT + Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2
When doing that, I cannot hear anything, because it seems to disconnect the speakers. My idea would be to set this pin to 0x00 instead of 0x40 when "Speakers" are set to mute (I don't know about master though). WDYT?
Attached all the files.
This sound card seems really weird. :)
Signature · 3 lines
Julien Danjou # Free Software hacker & freelance # http://julien.danjou.info
At Mon, 08 Oct 2012 18:52:26 +0200,
Quoted 8 lines · Julien Danjou
Quoted 5 lines · Takashi Iwai
Yep, as David pointed out, the beep control overrides the amp setup. And your previous result suggested that we shouldn't use this beep path either (except for unmuting it), otherwise you get a noise again.
Quoted 6 lines
Quoted 2 lines
So, the patch below is the revised version. It removes the beep control but still opens the path to NID
0x1d.It does remove the beep control, and I think it therefore break the beep
functionnality: I've no sound when echoing '\a'. But that's likely to be expected anyhow. :-/
Doesn't the beep work if you load pcspkr module? It should be there independently.
Quoted 6 lines
But yeah, definitely, I've no noise anymore in this case with this patch.
Now, I can still make the noise come back when "speaker" or "master" is muted. This is definitely not a side effect of your patch, I just didn't raise it before.
Hm, then maybe the effect of removing noise appears no matter which input of NID 0x0b be unmuted?
Quoted 44 lines
This diff is between "no noise" (= just loaded the module with your patch) and "noise with master muted":
diff -u
/tmp/no-noise.txt/tmp/noise-master-mute.txttmp/noise-master-mute.txt renamed from tmp/no-noise.txt +2
-2@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 16:36:44 UTC 2012 +!!Script ran on: Mon Oct 8 16:37:02 UTC 2012 !!Linux Distribution@@ -260,7 +260,7 @@ ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x00 0x00] + Amp-Out vals: [0x80 0x80] Pincap 0x00010050: OUT EAPD Balanced EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/AThis diff is between "no noise" (= just loaded the module with your patch) and "noise with speaker muted":
diff -u
/tmp/no-noise.txt/tmp/noise-speaker-mute.txttmp/noise-speaker-mute.txt renamed from tmp/no-noise.txt +1
-1@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 16:36:44 UTC 2012 +!!Script ran on: Mon Oct 8 16:37:10 UTC 2012 !!Linux Distribution
tmp/noise-speaker-mute.txt line 266
Quoted 8 lines
tmp/noise-speaker-mute.txt renamed from tmp/no-noise.txt +1
-1@@ -260,7 +260,7 @@ ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 - Amp-Out vals: [0x00 0x00] + Amp-Out vals: [0x80 0x80] Pincap 0x00010050: OUT EAPD Balanced EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A
So, obviously muting the amp triggers the noise.
BTW, does the noise come only from speaker, not from headphone, correct?
Related tests: what happens if you mute both input amps of the node 0x0d? This is a mixer widget between DAC and the speaker pin. Does this widget work as a proper mute/unmute point without causing noise?
Quoted 17 lines
Now, I've discovered one more thing, don't know if you know. This is how I managed to REALLY mute the speakers, the noise, everything (even playing a sound file with everything unmuted makes no sound):
% diff -u
/tmp/sound.txt/tmp/no-sound-at-all.txttmp/no-sound-at-all.txt renamed from tmp/sound.txt +1
-1@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 16:48:02 UTC 2012 +!!Script ran on: Mon Oct 8 16:47:50 UTC 2012 !!Linux Distribution
tmp/no-sound-at-all.txt line 273
Quoted 8 lines
tmp/no-sound-at-all.txt renamed from tmp/sound.txt +1
-1@@ -267,7 +267,7 @@ Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x40: OUT + Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2
This essentially disables the output of the speaker pin.
Quoted 4 lines
When doing that, I cannot hear anything, because it seems to disconnect the speakers. My idea would be to set this pin to
0x00instead of0x40when "Speakers" are set to mute (I don't know about master though). WDYT?
Possible, but a bit hackish. Let's see...
Takashi
Quoted 2 lines · Takashi Iwai
Doesn't the beep work if you load pcspkr module? It should be there independently.
pcspkr is loaded, but no sound from the speakers. And I don't think this laptop has an old buzzer. ;)
Quoted 2 lines
Hm, then maybe the effect of removing noise appears no matter which input of NID
0x0bbe unmuted?
I've retested some, and you're right, it seems some others do make the noise disappear:
For example, this works too:
@@ -198,7 +198,7 @@
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
- Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
+ Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
This one too:
@@ -198,7 +198,7 @@
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
- Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
+ Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Other pairs do not work, but some do change the noise sound.
No pair work when speakers or master is muted; the noise is always there, no matter which pair I mute/unmute.
Quoted 3 lines
So, obviously muting the amp triggers the noise.
BTW, does the noise come only from speaker, not from headphone, correct?
Yeah correct. Never got any noise in the headphone. (That's how and why I didn't got insane so far with that noise always there :)
Quoted 4 lines
Related tests: what happens if you mute both input amps of the node
0x0d? This is a mixer widget between DAC and the speaker pin. Does this widget work as a proper mute/unmute point without causing noise?
I tried all combinations on 0x0d with master unmuted: there's 2 inputs, so 4 combinations, and I got… 4 different noises. Almost funny. If master is muted, changing any input amps from 0x0d change nothing at all, noise still there.
Quoted 6 lines
Quoted 4 lines
When doing that, I cannot hear anything, because it seems to disconnect the speakers. My idea would be to set this pin to
0x00instead of0x40when "Speakers" are set to mute (I don't know about master though). WDYT?Possible, but a bit hackish. Let's see...
Heh, too bad. But you know better than me. :)
Signature · 3 lines
Julien Danjou // Free Software hacker & freelance // http://julien.danjou.info
Quoted 30 lines · Julien Danjou
Quoted 2 lines
Hm, then maybe the effect of removing noise appears no matter which input of NID
0x0bbe unmuted?I've retested some, and you're right, it seems some others do make the noise disappear:
For example, this works too:
(quoted diff) +1
-1@@ -198,7 +198,7 @@ Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-InThis one too:
(quoted diff) +1
-1@@ -198,7 +198,7 @@ Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Quoted 1 line
Other pairs do not work, but some do change the noise sound.
So; if everything is muted, it causes some codec bug to appear. If this only happens in the speaker, maybe we should try to reroute the speaker to go 0x02 -> 0x0c -> 0x14 instead of 0x03 -> 0x0d -> 0x14? What will happen if you change 0x14 to take its input from 0x0c instead?
Signature · 2 lines
David Henningsson, Canonical Ltd. https://launchpad.net/~diwic
At Tue, 09 Oct 2012 08:19:56 +0200,
Quoted 32 lines · David Henningsson
Quoted 30 lines · Julien Danjou
Quoted 2 lines
Hm, then maybe the effect of removing noise appears no matter which input of NID
0x0bbe unmuted?I've retested some, and you're right, it seems some others do make the noise disappear:
For example, this works too:
(quoted diff) +1
-1@@ -198,7 +198,7 @@ Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-InThis one too:
(quoted diff) +1
-1@@ -198,7 +198,7 @@ Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Quoted 6 lines
Quoted 1 line
Other pairs do not work, but some do change the noise sound.
So; if everything is muted, it causes some codec bug to appear. If this only happens in the speaker, maybe we should try to reroute the speaker to go
0x02->0x0c->0x14instead of0x03->0x0d->0x14? What will happen if you change0x14to take its input from0x0cinstead?
Your suggestion reminds me of another bug on another Vaio Z model but with a different codec. On that machine, the speaker output must come from the first DAC. Otherwise silences. Julien's machine might have a similar restriction.
The patch below will change the DAC assignment order. Give it a try instead of previous ones.
thanks,
Takashi
---
sound/pci/hda/patch_realtek.c +8 -0
@@ -5992,6 +5992,7 @@ static void alc269_fixup_mic2_mute(struct hda_codec *codec,enum {ALC269_FIXUP_SONY_VAIO ,ALC275_FIXUP_SONY_VAIO_GPIO2 , +ALC275_FIXUP_VAIO_SPEAKER ,ALC269_FIXUP_DELL_M101Z ,ALC269_FIXUP_SKU_IGNORE ,ALC269_FIXUP_ASUS_G73JW ,
@@ -6031,6 +6032,12 @@ static const struct alc_fixup alc269_fixups[] = { .chained = true, .chain_id =ALC269_FIXUP_SONY_VAIO }, + [ALC275_FIXUP_VAIO_SPEAKER] = { + .type = ALC_FIXUP_FUNC, + .v.func = alc882_fixup_no_primary_hp, /* same quirk code */ + .chained = true, + .chain_id =ALC269_FIXUP_SONY_VAIO + }, [ALC269_FIXUP_DELL_M101Z] = { .type = ALC_FIXUP_VERBS, .v.verbs = (const struct hda_verb []) {
@@ -6172,6 +6179,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x104d ,0x9073 ,"Sony VAIO" ,ALC275_FIXUP_SONY_VAIO_GPIO2 ),SND_PCI_QUIRK (0x104d ,0x907b ,"Sony VAIO" ,ALC275_FIXUP_SONY_HWEQ ),SND_PCI_QUIRK (0x104d ,0x9084 ,"Sony VAIO" ,ALC275_FIXUP_SONY_HWEQ ), +SND_PCI_QUIRK (0x104d ,0x90a5 ,"Sony VAIO Z" ,ALC275_FIXUP_VAIO_SPEAKER ),SND_PCI_QUIRK_VENDOR (0x104d ,"Sony VAIO" ,ALC269_FIXUP_SONY_VAIO ),SND_PCI_QUIRK (0x1028 ,0x0470 ,"Dell M101z" ,ALC269_FIXUP_DELL_M101Z ), SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
Quoted 7 lines · Takashi Iwai
Your suggestion reminds me of another bug on another Vaio Z model but with a different codec. On that machine, the speaker output must come from the first DAC. Otherwise silences. Julien's machine might have a similar restriction.
The patch below will change the DAC assignment order. Give it a try instead of previous ones.
Unfortunately, this doesn't help at all: with that patch I've a bunch of different noises following what I mute/unmute. And muting/unmuting the "Beep" toggles a different noise, but I cannot find the silence back. :(
Signature · 3 lines
Julien Danjou /* Free Software hacker & freelance http://julien.danjou.info */
On Tue, Oct 09 2012, David Henningsson wrote:
Hi David, Takashi,
I'm still trying to advance on this! :)
Quoted 4 lines
So; if everything is muted, it causes some codec bug to appear. If this only happens in the speaker, maybe we should try to reroute the speaker to go
0x02->0x0c->0x14instead of0x03->0x0d->0x14? What will happen if you change0x14to take its input from0x0cinstead?
I just did that using the hda-analyzer tool. I changed 0x14 to uses 0x0c as a source, and it's indeed much better. The noise disappear when neither master or speaker is muted, and actually the music playback sounds better and without the little background noise I still hear on low volume level.
Actually, I'm sure it'd be easy to come with a patch, so my question would rather be: what's this routing about, and why is 0x0d set up instead of 0x0c?
I'm still trying to find a way to fix the noise when speaker or master are muted. No chance so far. :(
Signature · 3 lines
Julien Danjou # Free Software hacker & freelance # http://julien.danjou.info
At Thu, 01 Nov 2012 23:39:52 +0100,
Quoted 12 lines · Julien Danjou
On Tue, Oct 09 2012, David Henningsson wrote:
Hi David, Takashi,
I'm still trying to advance on this! :)
Quoted 4 lines
So; if everything is muted, it causes some codec bug to appear. If this only happens in the speaker, maybe we should try to reroute the speaker to go
0x02->0x0c->0x14instead of0x03->0x0d->0x14? What will happen if you change0x14to take its input from0x0cinstead?
Quoted 5 lines
I just did that using the hda-analyzer tool. I changed
0x14to uses0x0cas a source, and it's indeed much better. The noise disappear when neither master or speaker is muted, and actually the music playback sounds better and without the little background noise I still hear on low volume level.
Good to hear. What's the remaining issue?
Quoted 3 lines
Actually, I'm sure it'd be easy to come with a patch, so my question would rather be: what's this routing about, and why is
0x0dset up instead of0x0c?
The current parser prefers the line-out as the primary output over the headphone. Then it tries to assign from the smaller NID, so 0x0c is assigned to the line-out (which is the speaker in your case), then 0x0d is to the headphone.
Quoted 2 lines
I'm still trying to find a way to fix the noise when speaker or master are muted. No chance so far. :(
Do you mean that the noise is there with rerouting like the above, or you are asking for a patch to achieve the rerouting?
Takashi
Quoted 7 lines · Takashi Iwai
Quoted 5 lines
I just did that using the hda-analyzer tool. I changed
0x14to uses0x0cas a source, and it's indeed much better. The noise disappear when neither master or speaker is muted, and actually the music playback sounds better and without the little background noise I still hear on low volume level.Good to hear. What's the remaining issue?
Well, it's still not perfect, and as I wrote, if any of "master" or "speaker" is muted, the noise kicks back in instantly. :(
Quoted 4 lines
The current parser prefers the line-out as the primary output over the headphone. Then it tries to assign from the smaller NID, so
0x0cis assigned to the line-out (which is the speaker in your case), then0x0dis to the headphone.
Ok, thanks for the explanation.
Quoted 5 lines
Quoted 2 lines
I'm still trying to find a way to fix the noise when speaker or master are muted. No chance so far. :(
Do you mean that the noise is there with rerouting like the above, or you are asking for a patch to achieve the rerouting?
If "master" or "speaker" is muted, the noise kicks back in, whatever the routing is.
At this point, I wonder if it wouldn't be simpler to just boot the machine under Windows and dump the HDA state to see how the Windows driver set up all the routing. Do you think this kind of approach would work, and in that case, is there a tool do achieve that?
Signature · 3 lines
Julien Danjou # Free Software hacker & freelance # http://julien.danjou.info
At Fri, 02 Nov 2012 12:29:40 +0100,
Quoted 9 lines · Julien Danjou
Quoted 6 lines · Takashi Iwai
Quoted 5 lines
I just did that using the hda-analyzer tool. I changed
0x14to uses0x0cas a source, and it's indeed much better. The noise disappear when neither master or speaker is muted, and actually the music playback sounds better and without the little background noise I still hear on low volume level.
Quoted 4 lines
Quoted 1 line
Good to hear. What's the remaining issue?
Well, it's still not perfect, and as I wrote, if any of "master" or "speaker" is muted, the noise kicks back in instantly. :(
OK, the behavior wasn't clear in your text above, so I asked it again. (mute and unmute are pretty confusing :)
Quoted 13 lines
Quoted 4 lines
The current parser prefers the line-out as the primary output over the headphone. Then it tries to assign from the smaller NID, so
0x0cis assigned to the line-out (which is the speaker in your case), then0x0dis to the headphone.Ok, thanks for the explanation.
Quoted 5 lines
Quoted 2 lines
I'm still trying to find a way to fix the noise when speaker or master are muted. No chance so far. :(
Do you mean that the noise is there with rerouting like the above, or you are asking for a patch to achieve the rerouting?
Quoted 8 lines
If "master" or "speaker" is muted, the noise kicks back in, whatever the routing is.
At this point, I wonder if it wouldn't be simpler to just boot the machine under Windows and dump the HDA state to see how the Windows driver set up all the routing. Do you think this kind of approach would work, and in that case, is there a tool do achieve that?
I have no idea about Windows, sorry.
Takashi
Quoted 3 lines · Takashi Iwai
At best, please give
alsa-info.shoutputs at both working and non-working cases. In that way, we can see the internal states more exactly than ambiguous descriptions.
Sure! Both attached [in gzip this time to pass the list].
The diff between background-noise and no-background-noise is:
tmp/alsa-info-no-background-noise.txt renamed from tmp/alsa-info-background-noise.txt +2 -2
@@ -3,7 +3,7 @@ !!ALSA Information Script v 0.4.61 !!################################ -!!Script ran on: Mon Oct 8 12:41:05 UTC 2012 +!!Script ran on: Mon Oct 8 12:42:24 UTC 2012 !!Linux Distribution
@@ -198,7 +198,7 @@ Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 - Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] + Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Signature · 4 lines
-- Julien Danjou // Free Software hacker & freelance // http://julien.danjou.info