arm64: dts: rockchip: Add EmbedFire LubanCat 1
Subsystems (2)
PATCH v5 1/2 arm64: dts: rockchip: Add EmbedFire LubanCat 1
From: DHDAXCW <[email protected]>
The LubanCat 1 is a RK3566 based SBC, developed by EmbedFire Electronics Co., Ltd.
It has the following characteristics:
- MicroSD card slot, onboard eMMC flash memory
- 1GbE Realtek RTL8211F Ethernet Transceiver
- 1 USB Type-C port (power and USB2.0 OTG)
- 1 USB 3.0 Host port
- 3 USB 2.0 Host ports
- 1 HDMI
- 1 infrared receiver
- 1 MIPI DSI
- 1 MIPI CSI
- 1 x 4-section headphone jack
- Mini PCIe socket (USB or PCIe)
- 1 SIM Card slot
- 1 SYS LED and 1 PWR LED
- 40-pin GPIO expansion header
---
Changed in V2:
- Remove RNG node
Changed in V3:
- Sent E-mail with a wrong attachment
Changed in V4:
- Modify all node names
Changed in V5:
- Fixed node name of vcc3v3_sys
- Fixed order in document
- Fixed commit message wrapping
--- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3566-lubancat-1.dts | 598 ++++++++++++++++++ 2 files changed, 599 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts new file +598 -0
598 lines not on this page · raw message
Signature · 1 line
2.27.0
PATCH v5 2/2 dt-bindings: arm: rockchip: Add EmbedFire LubanCat 1
From: DHDAXCW <[email protected]>
Add devicetree binding documentation for the EmbedFire LubanCat 1.
--- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
@@ -95,6 +95,11 @@ properties: - const: elgin,rv1108-r1 - const: rockchip,rv1108 + - description: EmbedFire LubanCat 1 + items: + - const: embedfire,lubancat-1 + - const: rockchip,rk3566 + - description: Engicam PX30.Core C.TOUCH 2.0 items: - const: engicam,px30-core-ctouch2
Signature · 1 line
2.27.0
Re: [PATCH v5 2/2] dt-bindings: arm: rockchip: Add EmbedFire LubanCat 1
Quoted 7 lines · Yuteng Zhong
From: DHDAXCW <[email protected]>
Add devicetree binding documentation for the EmbedFire LubanCat 1.
Signed-off-by Yuteng Zhong <[email protected]>Signed-off-by DHDAXCW <[email protected]>---
Thanks for the changes. The SoB chain is not correct - wrong order. "DHDAXCW" does not look person's name and we need real names.
Best regards,
Krzysztof
Re: [PATCH v5 2/2] dt-bindings: arm: rockchip: Add EmbedFire LubanCat 1
Got it. So the two SoB lines should be swapped? They should be changed to:
Quoted 16 lines · Krzysztof Kozlowski <[email protected]> 于2022年12月21日周三 23:06写道:
Quoted 7 lines · Yuteng Zhong
From: DHDAXCW <[email protected]>
Add devicetree binding documentation for the EmbedFire LubanCat 1.
Signed-off-by Yuteng Zhong <[email protected]>Signed-off-by DHDAXCW <[email protected]>---
Thanks for the changes. The SoB chain is not correct - wrong order. "DHDAXCW" does not look person's name and we need real names.
Best regards,
Krzysztof
Signature · 3 lines
Y. T. Zhong Student of The University of Hong Kong, major in Computer Science. E-mail: [email protected]
Re: [PATCH v5 2/2] dt-bindings: arm: rockchip: Add EmbedFire LubanCat 1
Quoted 4 lines · ty
Got it. So the two SoB lines should be swapped? They should be changed to:
Signed-off-by Wenhao Cui <[email protected]>Signed-off-by Yuteng Zhong <[email protected]>
Yes.
Best regards,
Krzysztof
Quoted 21 lines · Yuteng Zhong
From: DHDAXCW <[email protected]>
The LubanCat 1 is a RK3566 based SBC, developed by EmbedFire Electronics Co., Ltd.
It has the following characteristics:
- MicroSD card slot, onboard eMMC flash memory
- 1GbE Realtek RTL8211F Ethernet Transceiver
- 1 USB Type-C port (power and USB2.0 OTG)
- 1 USB 3.0 Host port
- 3 USB 2.0 Host ports
- 1 HDMI
- 1 infrared receiver
- 1 MIPI DSI
- 1 MIPI CSI
- 1 x 4-section headphone jack
- Mini PCIe socket (USB or PCIe)
- 1 SIM Card slot
- 1 SYS LED and 1 PWR LED
- 40-pin GPIO expansion header
Quoted 2 lines
Signed-off-by Yuteng Zhong <[email protected]>Signed-off-by DHDAXCW <[email protected]>
This also needs fixes (SoB order, full name)
Best regards,
Krzysztof