Initial attempt at flashing instructions.
cover Initial attempt at flashing instructions.
From: Drew Moseley <[email protected]>
This set of patches adds the native tools and target components needed to reflash the CHIP boards. Additionally a shell script is added to the deploy directory showing how to kick off a flash update. It's not ideal as I've hardcoded a max size for the UBI image into the script and didn't see much of an alternative. It does function though.
Drew
The following changes since commit 0079e6ac10fc371d6f527270c23b887561f717aa:
chip: Append to MACHINE_EXTRA_RRECOMMENDS rather than overwriting (2017-06-15 13:37:19 +0100)
are available in the git repository at:
[email protected]:drewmoseley/meta-chip.git flashing-instructions
for you to fetch changes up to 195a92fc1faa49495d1a2b6cda0134f07ce72189:
chip: Add chip-u-boot-scr recipe and flash script (2017-06-15 11:27:06 -0400)
----------------------------------------------------------------
Drew Moseley (3):
u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
chip: Build sunxi-tools-native.
chip: Add chip-u-boot-scr recipe and flash script
README | 26 ++++++++- conf/layer.conf | 3 ++ conf/machine/chip.conf | 3 +- recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 70 +++++++++++++++++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++++++ recipes-bsp/u-boot/u-boot-chip_git.bb | 7 +++ 7 files changed, 182 insertions(+), 2 deletions(-) create mode 100644 recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.full create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
Drew Moseley (3):
u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
chip: Build sunxi-tools-native.
chip: Add chip-u-boot-scr recipe and flash script
README | 26 ++++++++- conf/layer.conf | 3 ++ conf/machine/chip.conf | 3 +- recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 70 +++++++++++++++++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++++++ recipes-bsp/u-boot/u-boot-chip_git.bb | 7 +++ 7 files changed, 182 insertions(+), 2 deletions(-) create mode 100644 recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.full create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
Signature · 1 line
2.7.4
RFC PATCH 1/3 u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
From: Drew Moseley <[email protected]>
--- conf/machine/chip.conf | 1 + recipes-bsp/u-boot/u-boot-chip_git.bb | 6 ++++++ 2 files changed, 7 insertions(+)
conf/machine/chip.conf +1 -0
@@ -21,6 +21,7 @@ KERNEL_IMAGETYPE = "zImage" KERNEL_DEVICETREE = "sun5i-r8-chip.dtb" SPL_BINARY = "sunxi-spl.bin" +SPL_ECC_BINARY = "sunxi-spl-with-ecc.bin" UBOOT_BINARY = "u-boot-dtb.bin" UBOOT_MACHINE = "CHIP_defconfig"
recipes-bsp/u-boot/u-boot-chip_git.bb +6 -0
@@ -19,7 +19,13 @@ SRC_URI = " \ S = "${WORKDIR}/git" do_compile_append() { + install ${B}/spl/${SPL_ECC_BINARY} ${B}/${SPL_ECC_BINARY} install ${B}/spl/${SPL_BINARY} ${B}/${SPL_BINARY} } COMPATIBLE_MACHINE = "chip" + +do_deploy_append() { + install -m 644 ${B}/${SPL_ECC_BINARY} ${DEPLOYDIR}/${SPL_ECC_BINARY}-${PV}-${PR} + ln -sf ${SPL_ECC_BINARY}-${PV}-${PR} ${DEPLOYDIR}/${SPL_ECC_BINARY} +}
Signature · 1 line
2.7.4
RFC PATCH 2/3 chip: Build sunxi-tools-native.
In reply to [email protected]From: Drew Moseley <[email protected]>
Add LAYERDEPENDS on meta-sunxi and add the sunxi-tools-native pacakage to EXTRA_IMAGEDEPENDS.
--- conf/layer.conf | 3 +++ conf/machine/chip.conf | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-)
conf/layer.conf +3 -0
@@ -8,3 +8,6 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ BBFILE_COLLECTIONS += "meta-chip" BBFILE_PATTERN_meta-chip = "^${LAYERDIR}/" BBFILE_PRIORITY_meta-chip = "6" + +# Add this to get access to sunxi-tools recipe +LAYERDEPENDS_meta-chip = "meta-sunxi"
conf/machine/chip.conf +1 -1
@@ -5,7 +5,7 @@ MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" MACHINE_ESSENTIAL_EXTRA_RDEPENDS = " kernel-image kernel-devicetree" -EXTRA_IMAGEDEPENDS += "u-boot" +EXTRA_IMAGEDEPENDS += "u-boot sunxi-tools-native" DEFAULTTUNE ?= "cortexa8t-neon" include conf/machine/include/tune-cortexa8.inc
Signature · 1 line
2.7.4
Re: [meta-chip][RFC PATCH 2/3] chip: Build sunxi-tools-native.
Quoted 2 lines · On Fri, Jun 16, 2017 at 5:15 PM, <[email protected]> wrote:
Add LAYERDEPENDS on meta-sunxi and add the sunxi-tools-native pacakage to
EXTRA_IMAGEDEPENDS.
meta-chip's README should also indicate this dependency.
RFC PATCH 3/3 chip: Add chip-u-boot-scr recipe and flash script
In reply to [email protected]From: Drew Moseley <[email protected]>
Add a U-Boot script to handle flashing the SPL, U-Boot and UBI root filesystem images into the onboard flash. Also generate a script showing how to execute the flash steps.
--- README | 26 ++++++++- recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 70 +++++++++++++++++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++++++ recipes-bsp/u-boot/u-boot-chip_git.bb | 1 + 5 files changed, 171 insertions(+), 1 deletion(-) create mode 100644 recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.full create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
README +25 -1
@@ -59,4 +59,28 @@ To build a machine supported by this BSP layer follow the next steps: II. Flashing a C.H.I.P. board ======================================== -<TODO> +As part of the build including this BSP layer, a U-Boot script and a shell script +are created to assist in flashing your images to the CHIP board. Note that this +script assumes a maximum size for your UBI image of 0x0A000000 bytes. If your UBI +image exceeds that, then you will need to adapt this to your environment. + +To successfully run this script you will first need to set your board into FEL mode. +chip. https://docs.getchip.com/chip.html#flash-chip-with-an-os +Insert a wire into the U14 header between pin 7 (FEL) and GND. Then connect the +board with a USB cable to your build system. + +You need to specify the base filename of your UBI image using the UBI_IMAGE shell +variable before invoking the generated script as follows: + +$ UBI_IMAGE=core-image-full-cmdline-chip.ubi ./tmp/deploy/images/chip/flash_CHIP_board.sh + +This script will take some time to execute. If you have a serial console connected to +your board, you will see the progress and a message on the console will indicate when +the flashing is completed. Additionally, once the image is properly flashed, the status +LED on the CHIP board will flash 30 times per second indicating that it is safe to power +down your board and disable FEL mode. + +WARNING: This will erase the entire contents of your CHIP board. + +NOTE: This setup is still compatible with the CHIP flashing utility available +at http://flash.getchip.com if you choose to reinstall the stock images.
recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb new file +70 -0
70 lines not on this page · raw message
recipes-bsp/chip-u-boot-scr/files/boot.cmd.full new file +32 -0
@@ -0,0 +1,32 @@ +echo Scrubbing NAND +nand scrub -y 0x0 0x200000000 +echo Writing SPL (with ECC) to NAND address 0x0 +nand write.raw.noverify $SPL_MEM_ADDR 0x0 $PADDED_SPL_SIZE +echo Writing SPL (with ECC) to NAND address 0x400000 +nand write.raw.noverify $SPL_MEM_ADDR 0x400000 $PADDED_SPL_SIZE +echo Writing UBoot image to address 0x800000 +nand write $UBOOT_MEM_ADDR 0x800000 $PADDED_UBOOT_SIZE + +# Setup the default environment +setenv bootargs root=ubi0:rootfs rootfstype=ubifs rw earlyprintk ubi.mtd=4 +setenv bootcmd 'mtdparts; ubi part UBI; ubifsmount ubi0:rootfs; ubifsload \$fdt_addr_r /boot/sun5i-r8-chip.dtb; ubifsload \$kernel_addr_r /boot/zImage; bootz \$kernel_addr_r - \$fdt_addr_r' +setenv fel_booted 0 + +echo Enabling Splash +setenv stdout serial +setenv stderr serial +setenv splashpos m,m + +echo Setting Video Mode +setenv video-mode sunxi:640x480-24@60,monitor=composite-ntsc,overscan_x=40,overscan_y=20 + +echo Saving default environment +saveenv + +echo Writing UBI rootfs to NAND address 0x1000000 +nand write.slc-mode.trimffs $UBI_MEM_ADDR 0x1000000 $UBI_SIZE + +echo =========================================================== +echo Flashing Complete. Please power down and disable FEL mode. +echo =========================================================== +
recipes-bsp/chip-u-boot-scr/files/boot.cmd.in new file +43 -0
43 lines not on this page · raw message
recipes-bsp/u-boot/u-boot-chip_git.bb +1 -0
@@ -6,6 +6,7 @@ LIC_FILES_CHKSUM = "file://Licenses/README;md5=0507cd7da8e7ad6d6701926ec9b84c95" DEPENDS += "dtc-native" PROVIDES += "u-boot" +RDEPENDS_${PN}_append_chip = " chip-u-boot-scr" UBOOT_VERSION ?= "2016.01" PV = "${UBOOT_VERSION}+git${SRCPV}"
Signature · 1 line
2.7.4
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
README To build a machine supported by this BSP layer follow the next steps:
Quoted 5 lines · On Fri 2017-06-16 @ 05:15:40 PM, [email protected] wrote:
README +0
-0@@ -59,4 +59,28 @@ To build a machine supported by this BSP layer follow the next steps:
Please wrap the additions to the README to 80 columns.
Quoted 8 lines
README +4
-1II. Flashing a C.H.I.P. board ======================================== -<TODO> +As part of the build including this BSP layer, a U-Boot script and a shell script +are created to assist in flashing your images to the CHIP board. Note that this +script assumes a maximum size for your UBI image of 0x0A000000 bytes. If your UBI +image exceeds that, then you will need to adapt this to your environment.
README To build a machine supported by this BSP layer follow the next steps: · line 75
Quoted 10 lines
README +10
-0+ +To successfully run this script you will first need to set your board into FEL mode. +chip. https://docs.getchip.com/chip.html#flash-chip-with-an-os +Insert a wire into the U14 header between pin 7 (FEL) and GND. Then connect the +board with a USB cable to your build system. + +You need to specify the base filename of your UBI image using the UBI_IMAGE shell +variable before invoking the generated script as follows: + +$ UBI_IMAGE=core-image-full-cmdline-chip.ubi ./tmp/deploy/images/chip/flash_CHIP_board.sh
Outside of a udev tweak, this script needs to be run as root. It's traditional to indicate commands run as root by prefixing them with a PS1 of '#'.
Quoted 11 lines
README +11
-0+ +This script will take some time to execute. If you have a serial console connected to +your board, you will see the progress and a message on the console will indicate when +the flashing is completed. Additionally, once the image is properly flashed, the status +LED on the CHIP board will flash 30 times per second indicating that it is safe to power +down your board and disable FEL mode. + +WARNING: This will erase the entire contents of your CHIP board. + +NOTE: This setup is still compatible with the CHIP flashing utility available +at http://flash.getchip.com if you choose to reinstall the stock images.
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
In reply to [email protected]Quoted 1 line · On Fri 2017-06-16 @ 05:15:40 PM, [email protected] wrote:
+This script will take some time to execute.
true
Review
Quoted 3 lines
If you have a serial console connected to
(quoted diff) +2
-0+your board, you will see the progress and a message on the console will indicate when +the flashing is completed.
hmmm, never saw this. I have a console connected, the moment the script started, on the console I got:
U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from
which looks right, the date+time are good.
Where I started the script I get:
# UBI_IMAGE=core-image-full-cmdline-chip.ubi # tmp-glibc/deploy/images/chip/flash_CHIP_board.sh 100% [================================================] 3537 kB, 557.5 kB/s 100% [================================================] 616 kB, 823.9 kB/s 100% [================================================] 2 kB, 733.9 kB/s 100% [================================================] 654311 kB, 771.4 kB/s
README To build a machine supported by this BSP layer follow the next steps: · line 81
Quoted 3 lines
Additionally, once the image is properly flashed, the status
README +2
-0+LED on the CHIP board will flash 30 times per second indicating that it is safe to power +down your board and disable FEL mode.
I don't get any LED flashing, and nothing other than what I've pasted above on the console.
Rebooting the board after flashing outside of FEL mode simply boots the previous u-boot and image.
Any thoughts?
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
Quoted 2 lines · Trevor Woerner
On Fri 2017-06-16 @ 05:15:40 PM, [email protected] wrote:
Any thoughts?
It appears my image was too large. Using a smaller image appears to work as expected!
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
In reply to Trevor WoernerQuoted 10 lines · Trevor Woerner
Review
Quoted 4 lines
If you have a serial console connected to
(quoted diff) +2
-0+your board, you will see the progress and a message on the console will indicate when +the flashing is completed.hmmm, never saw this. I have a console connected, the moment the script started, on the console I got:
Quoted 6 lines
U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot fromwhich looks right, the date+time are good.
Did you see the proper serial output after using a smaller image?
Drew
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
Quoted 10 lines · Drew Moseley
Quoted 10 lines · Trevor Woerner
Review
Quoted 4 lines
If you have a serial console connected to
(quoted diff) +2
-0+your board, you will see the progress and a message on the console will indicate when +the flashing is completed.hmmm, never saw this. I have a console connected, the moment the script started, on the console I got:
Quoted 8 lines
Quoted 6 lines
U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot fromwhich looks right, the date+time are good.
Did you see the proper serial output after using a smaller image?
Yes. With a smaller image (~90MB) the flash update worked. Maybe another improvement for a v2 would be for the script to look at the size of /full/path/to/UBI_IMAGE and issue a warning/error if it's too big?
I think the wording of what to expect on the host and over the serial console could use some updating. Not to mention you say: "the status LED on the CHIP board will flash 30 times per second..." which doesn't seem to be the case, it looks more like the LED is toggled every 2 seconds (??), in any case, it's a lot slower than 30/sec.
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
2017-06-19 16:40 skrev Trevor Woerner:
Quoted 1 line
On Mon, Jun 19, 2017 at
Quoted 2 lines · Drew Moseley
Quoted 2 lines
Quoted 2 lines
On Jun 19,
Quoted 2 lines · Trevor Woerner
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
If you have a serial console connected to +your board, you will see the progress and a message on the console will indicate when +the flashing is completed.
Quoted 1 line
Quoted 1 line
Quoted 1 line
hmmm, never saw this. I have a console connected, the
moment the script started, on the console I got: U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from which looks right, the date+time are good.
Quoted 1 line
Quoted 1 line
Did
you see the proper serial output after using a smaller image?
Quoted 2 lines
Yes.
With a smaller image (~90MB) the flash update worked. Maybe
Quoted 1 line
another
improvement for a v2 would be for the script to look at the
Quoted 1 line
size of
/full/path/to/UBI_IMAGE and issue a warning/error if it's too
Quoted 4 lines
big?
I think the wording of what to expect on the host and over the
serial
Quoted 1 line
console could use some updating. Not to mention you say: "the
status
Quoted 1 line
LED on the CHIP board will flash 30 times per second..." which
doesn't
Quoted 1 line
seem to be the case, it looks more like the LED is toggled
every 2
Quoted 1 line
seconds (??), in any case, it's a lot slower than 30/sec.
I
also had the same experience as Trevor, that the led seems to flash every 2 seconds. Also the code indicate that 2 x 1 sec sleep is used in this area, so please go through the above description when it comes to led experience during flashing. Another minor comment is that I believe you should update the UBI_IMAGE example in README to use the "default" meta-chip hwup image (chip-hwup-image-chip.ubi).
BR Petter
Petter
Mabäcker
Technux <[email protected]>
www.technux.se
Re: [meta-chip][RFC PATCH 3/3] chip: Add chip-u-boot-scr recipe and flash script
Quoted 21 lines · Petter Mabäcker
2017-06-19 16:40 skrev Trevor Woerner:
Quoted 11 lines · On Mon, Jun 19, 2017 at 7:22 AM, Drew Moseley <[email protected]…
Quoted 5 lines
Quoted 4 lines · On Jun 19, 2017, at 1:48 AM, Trevor Woerner <[email protected]…
Quoted 2 lines
If you have a serial console connected to +your board, you will see the progress and a message on the console will indicate when +the flashing is completed.
hmmm, never saw this. I have a console connected, the moment the script started, on the console I got: U-Boot SPL 2016.01 (Jun 19 2017 - 00:32:19) DRAM: 512 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from which looks right, the date+time are good.
Did you see the proper serial output after using a smaller image?
Yes. With a smaller image (~90MB) the flash update worked. Maybe another improvement for a v2 would be for the script to look at the size of /full/path/to/UBI_IMAGE and issue a warning/error if it's too big?
Quoted 5 lines
I think the wording of what to expect on the host and over the serial console could use some updating. Not to mention you say: "the status LED on the CHIP board will flash 30 times per second..." which doesn't seem to be the case, it looks more like the LED is toggled every 2 seconds (??), in any case, it's a lot slower than 30/sec.
Quoted 8 lines
I also had the same experience as Trevor, that the led seems to flash every 2 seconds. Also the code indicate that 2 x 1 sec sleep is used in this area, so please go through the above description when it comes to led experience during flashing. Another minor comment is that I believe you should update the
UBI_IMAGEexample in README to use the "default" meta-chip hwup image (chip-hwup-image-chip.ubi).BR Petter
Petter Mabäcker
Technux <[email protected]>
www.technux.se
Indeed. The comment was intended to say that it flashes 30/min. Obviously flashing 30/sec would not be a very easy thing for people to spot.
I’ll work through the comments and submit V2. It will take me a few days.
Many thanks for the feedback.
Drew
2017-06-16 23:15 skrev [email protected]:
Quoted 1 line
From: Drew
Moseley <[email protected]>
Quoted 2 lines
This set of patches adds the
native tools and target components needed to
Quoted 1 line
reflash the CHIP boards.
Additionally a shell script is added to the deploy
Quoted 1 line
directory showing
how to kick off a flash update. It's not ideal as I've
Quoted 1 line
hardcoded a max
size for the UBI image into the script and didn't see much
Quoted 1 line
of an
alternative. It does function though.
Quoted 4 lines
Drew
The following
changes since commit 0079e6ac10fc371d6f527270c23b887561f717aa:
Quoted 2 lines
chip: Append to MACHINE_EXTRA_RRECOMMENDS rather than overwriting (2017-06-15 13:37:19 +0100)
Quoted 2 lines
are available in the git repository
at:
Quoted 2 lines
[email protected]:drewmoseley/meta-chip.git
flashing-instructions
Quoted 2 lines
for you to fetch changes up to
195a92fc1faa49495d1a2b6cda0134f07ce72189:
Quoted 2 lines
chip: Add chip-u-boot-scr
recipe and flash script (2017-06-15 11:27:06 -0400)
Quoted 2 lines
----------------------------------------------------------------
Quoted 1 line
Drew
Moseley (3):
Quoted 2 lines
u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
chip: Build sunxi-tools-native.
Quoted 1 line
chip: Add chip-u-boot-scr recipe and
flash script
Quoted 4 lines
README | 26 ++++++++-
conf/layer.conf| 3 ++
conf/machine/chip.conf | 3 +-
Quoted 1 line
recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 70
+++++++++++++++++++++++++
Quoted 1 line
recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++++
Quoted 1 line
recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++++++
Quoted 1 line
recipes-bsp/u-boot/u-boot-chip_git.bb | 7 +++
Quoted 1 line
7 files changed, 182
insertions(+), 2 deletions(-)
Quoted 1 line
create mode 100644
recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb
Quoted 1 line
create mode 100644
recipes-bsp/chip-u-boot-scr/files/boot.cmd.full
Quoted 1 line
create mode 100644
recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
Quoted 3 lines
Drew Moseley (3):
u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
Quoted 1 line
chip: Build
sunxi-tools-native.
Quoted 1 line
chip: Add chip-u-boot-scr recipe and flash
script
Quoted 4 lines
README | 26 ++++++++-
conf/layer.conf| 3 ++
conf/machine/chip.conf | 3 +-
Quoted 1 line
recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 70
+++++++++++++++++++++++++
Quoted 1 line
recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++++
Quoted 1 line
recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++++++
Quoted 1 line
recipes-bsp/u-boot/u-boot-chip_git.bb | 7 +++
Quoted 1 line
7 files changed, 182
insertions(+), 2 deletions(-)
Quoted 1 line
create mode 100644
recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb
Quoted 1 line
create mode 100644
recipes-bsp/chip-u-boot-scr/files/boot.cmd.full
Quoted 1 line
create mode 100644
recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
Quoted 3 lines
Signature · 2 lines
-- 2.7.4
Hi Drew,
First of all, great work. The flashing mechanism have been sort of a headache for many. Even if like you say there are some limitations etc with this proposal, it works and it's easy to use. Also since no other major concern have been provided by other reviewers, I think you should fix the comments received and then send it as non-RFC patch. Also check with Andrei if he want to have this as a PR in github as well.
BR
Petter
Petter Mabäcker
Technux <[email protected]>
www.technux.se