Skip to contentSkip to conversation

Multistreaming Playback using Front Panel Headphone with realtek codec

PATCH Raymond Yau 3 participants 14 messages May 4, 2011 – May 15, 2011 Sound

lore
Share & tools
lore
#0 lore raw

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones or speakers.

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

Add an "Independent HP" switch to turn this feature on/off for desktop for those HDA codec

Test:
1) speaker-test -c 8 -t wav -Dhw:0,0
2) speaker-test -c 2 -t wav -Dhw:0,2

It will need modification to support this feature for those desktop with 8 channels codec

From bfcfd3245c56993057b52641baf694ac73501022 Mon Sep 17 00:00:00 2001
From: Raymond Yau <[email protected]>
Date: Wed, 4 May 2011 21:44:28 +0800
Subject: [PATCH ALSA hda] Add Multistreaming Playback using Front Panel Headphone for realtek codec

sound/pci/hda/patch_realtek.c +136 -2
index 4dd0ccc..b1d5e01 100644
@@ -340,6 +340,7 @@ struct alc_spec {
 					 * dig_out_nid and hp_nid are optional
 					 */
 	hda_nid_t alt_dac_nid;
+	int independent_hp;
 	hda_nid_t slave_dig_outs[3];	/* optional - for auto-parsing */
 	int dig_out_type;
 
@@ -1157,7 +1158,8 @@ static void update_speakers(struct hda_codec *codec)
 static void alc_hp_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-
+	if (spec->independent_hp)
+		return;
 	if (!spec->automute)
 		return;
 	spec->jack_present =
@@ -1645,6 +1647,85 @@ static void alc_init_auto_mic(struct hda_codec *codec)
 	spec->unsol_event = alc_sku_unsol_event;
 }
 
+static int alc_independent_hp_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	static const char * const texts[] = { "OFF", "ON", NULL};
+	int index;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	index = uinfo->value.enumerated.item;
+	if (index >= 2)
+		index = 1;
+	strcpy(uinfo->value.enumerated.name, texts[index]);
+	return 0;
+}
+
+static int alc_independent_hp_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	ucontrol->value.enumerated.item[0] = spec->independent_hp;
+	return 0;
+}
+
+static int alc_independent_hp_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct alc_spec *spec = codec->spec;
+	unsigned int select = ucontrol->value.enumerated.item[0];
+	if (spec->independent_hp != select) {
+		spec->independent_hp = select;
+		if (spec->independent_hp)
+			spec->multiout.hp_nid = 0;
+		else
+			spec->multiout.hp_nid = spec->alt_dac_nid;
+		return 1;
+	}
+	return 0;
+}
+
+static const struct snd_kcontrol_new alc_independent_hp_switch = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Independent HP",
+	.info = alc_independent_hp_info,
+	.get = alc_independent_hp_get,
+	.put = alc_independent_hp_put,
+};
+
+/*
+   Multistreaming playback using Headphone at Front Panel
+   Add Independent Headphone control only when there are
+   1) HP at Ext Front and Line Out at Ext Rear
+*/
+static void add_independent_hp(struct hda_codec *codec, hda_nid_t pin,
+				hda_nid_t nid)
+{
+	struct alc_spec *spec = codec->spec;
+	struct snd_kcontrol_new *knew;
+	u32 hp_cfg, lo_cfg;
+	hp_cfg = snd_hda_codec_get_pincfg(codec, pin);
+	lo_cfg = snd_hda_codec_get_pincfg(codec, spec->autocfg.line_out_pins[0]);
+	if ((spec->autocfg.line_outs >= 1) &&
+		(nid != spec->multiout.dac_nids[HDA_FRONT]) &&
+		(get_defcfg_device(hp_cfg) == AC_JACK_HP_OUT) &&
+		(get_defcfg_location(hp_cfg) == AC_JACK_LOC_FRONT) &&
+		(get_defcfg_device(lo_cfg) == AC_JACK_LINE_OUT) &&
+		(get_defcfg_location(lo_cfg) == AC_JACK_LOC_REAR)) {
+
+		spec->alt_dac_nid = nid;
+
+		knew = alc_kcontrol_new(spec);
+		if (knew) {
+			*knew = alc_independent_hp_switch;
+			knew->name = kstrdup("Independent HP", GFP_KERNEL);
+		}
+	}
+}
+
 /* Could be any non-zero and even value. When used as fixup, tells
  * the driver to ignore any present sku defines.
  */
@@ -4138,6 +4219,19 @@ static int alc_check_power_status(struct hda_codec *codec, hda_nid_t nid)
 }
 #endif
 
+static void activate_ctl(struct hda_codec *codec, const char *name, int active)
+{
+	struct snd_kcontrol *ctl = snd_hda_find_mixer_ctl(codec, name);
+	if (ctl) {
+		ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+		ctl->vd[0].access |= active ? 0 : SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+		ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_WRITE;
+		ctl->vd[0].access |= active ? SNDRV_CTL_ELEM_ACCESS_WRITE : 0;
+		snd_ctl_notify(codec->bus->card,
+			       SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
+	}
+}
+
 /*
  * Analog playback callbacks
  */
@@ -4169,6 +4263,34 @@ static int alc880_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
 	return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
 }
 
+static int alc880_playback_pcm_close(struct hda_pcm_stream *hinfo,
+				     struct hda_codec *codec,
+				     struct snd_pcm_substream *substream)
+{
+	activate_ctl(codec, "Independent HP", 1);
+	return 0;
+}
+
+static int alc880_alt_playback_pcm_open(struct hda_pcm_stream *hinfo,
+				    struct hda_codec *codec,
+				    struct snd_pcm_substream *substream)
+{
+	struct alc_spec *spec = codec->spec;
+	if (spec->independent_hp) {
+		activate_ctl(codec, "Independent HP", 0);
+		return 0;
+	}
+	return -EBUSY;
+}
+
+static int alc880_alt_playback_pcm_close(struct hda_pcm_stream *hinfo,
+					 struct hda_codec *codec,
+					 struct snd_pcm_substream *substream)
+{
+	activate_ctl(codec, "Independent HP", 1);
+	return 0;
+}
+
 /*
  * Digital out
  */
@@ -4280,7 +4402,8 @@ static const struct hda_pcm_stream alc880_pcm_analog_playback = {
 	.ops = {
 		.open = alc880_playback_pcm_open,
 		.prepare = alc880_playback_pcm_prepare,
-		.cleanup = alc880_playback_pcm_cleanup
+		.cleanup = alc880_playback_pcm_cleanup,
+		.close = alc880_playback_pcm_close
 	},
 };
 
@@ -4296,6 +4419,10 @@ static const struct hda_pcm_stream alc880_pcm_analog_alt_playback = {
 	.channels_min = 2,
 	.channels_max = 2,
 	/* NID is set in alc_build_pcms */
+	.ops = {
+		.open = alc880_alt_playback_pcm_open,
+		.close = alc880_alt_playback_pcm_close
+	},
 };
 
 static const struct hda_pcm_stream alc880_pcm_analog_alt_capture = {
@@ -19049,6 +19176,9 @@ static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
 	err = alc662_add_sw_ctl(spec, pfx, mix, 3);
 	if (err < 0)
 		return err;
+
+	if (strcmp(pfx, "Headphone") == 0 && spec->autocfg.line_outs == 4)
+		add_independent_hp(codec, pin, nid);
 	return nid;
 }
 
@@ -19500,6 +19630,10 @@ static int patch_alc662(struct hda_codec *codec)
 	spec->stream_analog_playback = &alc662_pcm_analog_playback;
 	spec->stream_analog_capture = &alc662_pcm_analog_capture;
 
+	if (spec->alt_dac_nid)
+		spec->stream_analog_alt_playback =
+			&alc880_pcm_analog_alt_playback;
+
 	spec->stream_digital_playback = &alc662_pcm_digital_playback;
 	spec->stream_digital_capture = &alc662_pcm_digital_capture;
 
Signature · 1 line
1.6.0.6
#1 lore raw

At Wed, 4 May 2011 23:42:24 +0800,

Quoted 7 lines · Raymond Yau

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones or speakers.

Quoted 8 lines

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and "Independent", or such. An enum with "ON" and "OFF" is no sensible choice.

Takashi

#2 lore raw

2011/5/5 Takashi Iwai <[email protected]>

Quoted 23 lines

At Wed, 4 May 2011 23:42:24 +0800,

Quoted 5 lines · Raymond Yau

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones

or

Quoted 10 lines

speakers.

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and "Independent", or such. An enum with "ON" and "OFF" is no sensible choice.

Quoted 6 lines

Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Hi Raymond,
Looking at the specs of my motherboard (ASUS P7H55M-PRO) they wrote:
Realtek ALC892 8-Channel High Definition Audio CODEC
- BD Audio Layer Content Protection
- Support Jack-dectection, Multi-streaming,Front Panel Jack-Retasking (Mic in port)
- ASUS Noise Filter
- Optical S/PDIF out ports at back I/O
But from Realtek specs they wrote
" Ten DAC channels support 16/20/24-bit PCM format for 7.1 channel sound playback, plus 2 channels of concurrent independent stereo sound output (multiple streaming) through the front panel output "
An asus spec error? will be useful a test made on my motherboard?

About my problem, the audio card with the latest patches seems to work (but great noise when nothing is playing is present, i also tried to mute everything in alsamixer) so i could say "it works with model=auto"

I applied the patch, and build the kernel, this is my lastest alsa-info:
http://www.alsa-project.org/db/?f=61aa4129d0ea771ebc7226ea80c5c3ead24ef05c

"Loaded ALSA modules" is empty, but lsmod says:
dante log # lsmod|grep snd
snd_hda_codec_realtek 298841 1

snd_hda_intel          20936  0
snd_hda_codec          62886  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5484  1 snd_hda_codec

dante log #

I notice this in my dmesg

[   12.805835] ALSA sound/pci/hda/patch_realtek.c:1842: realtek: No valid
SSID, checking pincfg 0x4005e601 for NID 0x1d
[   12.805838] ALSA sound/pci/hda/patch_realtek.c:1858: realtek: Enabling
init ASM_ID=0xe601 CODEC_ID=10ec0892
[   12.805890] ALSA sound/pci/hda/patch_realtek.c:1569: realtek: Enable HP

auto-muting on NID 0x1b
Is normal "No valid SSID" ?

Alsa-conf still not find my sound card.

Sorry for the long story, but i would give you more informations as i can to help.

#3 lore raw

2011/5/5 Valerio tesei <[email protected]>

Quoted 6 lines

Hi Raymond,

About my problem, the audio card with the latest patches seems to work (but great noise when nothing is playing is present, i also tried to mute everything in alsamixer) so i could say "it works with model=auto"

I think it just partially works with model=auto

according to your alsa-info.sh

Quoted 2 lines

I applied the patch, and build the kernel, this is my lastest alsa-info:
http://www.alsa-project.org/db/?f=61aa4129d0ea771ebc7226ea80c5c3ead24ef05c

There are two sets of capture volume/switch and input sources controls but only one capture device

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1

Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Rear Mic' 'Front Mic' 'Line'
Item0: 'Rear Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Rear Mic' 'Front Mic' 'Line'
Item0: 'Line'

What kind of noise ?

Do you mean that the noise can be hear in HP and all audio jacks at rear panel ?

Have you try those parameter in

http://git.alsa-project.org/?p=alsa-kernel.git;a=blob_plain;f=Documentation/sound/alsa/HD-Audio.txt

Assuming that you are using default devices in
/usr/share/alsa/cards/HDA-Intel.conf

You should keep "PCM Playback Volume" at 0dB since it a softvol plugin

Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 180 [71%] [-15.00dB]
Front Right: Playback 180 [71%] [-15.00dB]

    control.36 {
        comment.access 'read write user'
        comment.type INTEGER
        comment.count 2
        comment.range '0 - 255'
        comment.tlv '0000000100000008ffffec1400000014'
        comment.dbmin -5100
        comment.dbmax 0
        iface MIXER
        name 'PCM Playback Volume'
        value.0 180
        value.1 180
    }
Quoted 5 lines

So i made the test, i correctly hear the tests, 7 outputs for the rear panel, and 2 for the front, but when i play the first test, i hear on the front panel some noise and realy crackly and whispered the tests when front left and front right are played, i guess it is not normal, may this help?

Can you compile the driver --with-debug=verbose ?

Check those hda_codec_setup_stream , hda_codec_prepare_stream and hda_codec_cleanup_stream

when the driver is init, "independent HP" is off by default so you should find one setup stream/cleanup stream for each DAC

when turn on , only four DAC is used when playing 8 channels

only 1 DAC is used for device 2

#4 lore raw

2011/5/7 Raymond Yau <[email protected]>

Quoted 5 lines

2011/5/5 Valerio tesei <[email protected]>

Quoted 3 lines

Hi Raymond,

Quoted 8 lines
Quoted 1 line

About my problem, the audio card with the latest patches seems to work

(but

Quoted 2 lines

great noise when nothing is playing is present, i also tried to mute everything in alsamixer) so i could say "it works with model=auto"

I think it just partially works with model=auto

This mean that i must wait that some one fix my sound card? I'm not able to do this by myself

Quoted 11 lines

according to your alsa-info.sh

Quoted 2 lines

I applied the patch, and build the kernel, this is my lastest alsa-info:

http://www.alsa-project.org/db/?f=61aa4129d0ea771ebc7226ea80c5c3ead24ef05c

There are two sets of capture volume/switch and input sources controls but only one capture device

So the patch is not working for my hw, or I was wrong with configuration?

Quoted 56 lines

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1

Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Rear Mic' 'Front Mic' 'Line'
Item0: 'Rear Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Rear Mic' 'Front Mic' 'Line'
Item0: 'Line'

What kind of noise ?

Do you mean that the noise can be hear in HP and all audio jacks at rear panel ?

Have you try those parameter in

http://git.alsa-project.org/?p=alsa-kernel.git;a=blob_plain;f=Documentation/sound/alsa/HD-Audio.txt

Assuming that you are using default devices in
/usr/share/alsa/cards/HDA-Intel.conf

You should keep "PCM Playback Volume" at 0dB since it a softvol plugin

Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 180 [71%] [-15.00dB]
Front Right: Playback 180 [71%] [-15.00dB]

   control.36 {
       comment.access 'read write user'
       comment.type INTEGER
       comment.count 2
       comment.range '0 - 255'
       comment.tlv '0000000100000008ffffec1400000014'
       comment.dbmin -5100
       comment.dbmax 0
       iface MIXER
       name 'PCM Playback Volume'
       value.0 180
       value.1 180
    }
Quoted 8 lines
Quoted 5 lines

So i made the test, i correctly hear the tests, 7 outputs for the rear panel, and 2 for the front, but when i play the first test, i hear on the front panel some noise and realy crackly and whispered the tests when front left and front right are played, i guess it is not normal, may this help?

Can you compile the driver --with-debug=verbose ?

I'm building the kernel version of the alsa driver, using the kernel git from takashi, how could I pass the verbose parameter while building the kernel version of the driver, somethings in the sound/Makefile or i should enable the "Verbose printk" ?

Quoted 7 lines

Check those hda_codec_setup_stream , hda_codec_prepare_stream and hda_codec_cleanup_stream

when the driver is init, "independent HP" is off by default so you should find one setup stream/cleanup stream for each DAC

Quoted 8 lines

when turn on , only four DAC is used when playing 8 channels

only 1 DAC is used for device 2
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

What about the rear / front problem that make hear only one channel at front and only one channel at rear is a configuration problem or a driver problem? I tried a lot deleting asound.state
Help me to collect the informations that you need, sorry for my noobish.

V.

#5 lore raw

2011/5/9 Valerio tesei <[email protected]>

Quoted 9 lines

2011/5/7 Raymond Yau <[email protected]>

Quoted 7 lines

2011/5/5 Valerio tesei <[email protected]>

Quoted 4 lines

Hi Raymond,

About my problem, the audio card with the latest patches seems to work

(but

Quoted 9 lines
Quoted 6 lines
Quoted 2 lines

great noise when nothing is playing is present, i also tried to mute everything in alsamixer) so i could say "it works with model=auto"

I think it just partially works with model=auto

This mean that i must wait that some one fix my sound card? I'm not able to do this by myself

What about the rear / front problem that make hear only one channel at

Quoted 5 lines

front
and only one channel at rear is a configuration problem or a driver problem?

you can use hda-analyzer to change the volume slider and mute switch in the path from [Audio Output] to [Pin Complex] ,the graph show all the connected path in thick blue line (same as datasheet) and the status line show the value of those mixers

Quoted 11 lines

according to your alsa-info.sh

Quoted 2 lines

I applied the patch, and build the kernel, this is my lastest alsa-info:

http://www.alsa-project.org/db/?f=61aa4129d0ea771ebc7226ea80c5c3ead24ef05c

There are two sets of capture volume/switch and input sources controls but only one capture device

The auto model need to check whether HDA controller has enough stream for alt_capture device 2

Can you record from device 2 and device 0 from different mic or line in at the same time ?

after you force the driver to create device 2

    if (!spec->adc_nids) {
        spec->adc_nids = alc662_adc_nids;
        spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
    }
    if (!spec->capsrc_nids)
        spec->capsrc_nids = alc662_capsrc_nids;

    if (!spec->cap_mixer)
        set_capture_mixer(codec);

+ spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture;

if not, the driver may need to mute and remove the controls of second ADC

Quoted 8 lines
Quoted 8 lines

What kind of noise ?

Do you mean that the noise can be hear in HP and all audio jacks at rear panel ?

Quoted 6 lines
Quoted 5 lines
Quoted 5 lines

So i made the test, i correctly hear the tests, 7 outputs for the rear panel, and 2 for the front, but when i play the first test, i hear on the front panel some noise and realy crackly and whispered the tests when front left and front right are played, i guess it is not normal, may this help?

if you turn on "Independent HP" but still hear sound when you are playing sound to rear panel,

The logic in snd_hda_multi_out_analog_prep()
1) set up line_out[0] to use Front DAC
2) set up HP if (!mout->no_share_stream &&

        mout->hp_nid && mout->hp_nid != nids[HDA_FRONT])

3) copy front to extra out if (!mout->no_share_stream && mout->extra_out_nid[i])
4) setup other line_out up to request channel
5) copy front to remain line_out

so you need to check the system log whether the correct [Audio Output] are used in 2, 4, 6, 8 channels playback

when playing stereo, the left channel is copy to the center and the right channel is copy to the subwoofer for the orange jack. because of (5)

My patch is based on "auto" model can create a "Headphone Playback Volume" on a DAC which is not already used by multi_out (rear panel jacks for multichannel playback)

The "Independent HP" is off by default so it is as same as the original model="auto"
so mout->hp_nid must not be null

Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00]
Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger Vref caps: HIZ 50 GRD 80 100
EAPD 0x2: EAPD
Pin Default 0x02214820: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=04, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 5
0x0c 0x0d 0x0e 0x0f 0x26*

If the noise already appear with model=auto without my patch

a) you can force the driver connect HP to 0x0c (the mixer of Front DAC) , but there won't be any "Headphone Volume Control" in this path

static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
const char *pfx)

{
    struct alc_spec *spec = codec->spec;
    hda_nid_t nid, mix;
    int err;

    if (!pin)
        return 0;
    nid = alc_auto_look_for_dac(codec, pin);
+   nid = 0;
    if (!nid) {

b) you can disable the copy front mode by

comment the code related to 3) and 5)

c) study the info about anti -pop mode (EPSS) in the datasheet

d) disable the unsolicited event for hp automute

e) disable sticky stream

spec->no_sticky_stream = 1

#6 lore raw
In reply to Takashi Iwai

2011/5/5 Takashi Iwai <[email protected]>

Quoted 19 lines

At Wed, 4 May 2011 23:42:24 +0800,

Quoted 5 lines · Raymond Yau

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones

or

Quoted 10 lines

speakers.

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

Quoted 6 lines

I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and "Independent", or such. An enum with "ON" and "OFF" is no sensible choice.

Takashi

Use "Independent HP" just because patch_via.c already used it so it is better to use a standard name for all hda codecs

#7 lore raw

At Fri, 6 May 2011 11:30:16 +0800,

Quoted 26 lines · Raymond Yau

2011/5/5 Takashi Iwai <[email protected]>

Quoted 23 lines

At Wed, 4 May 2011 23:42:24 +0800,

Quoted 5 lines · Raymond Yau

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones

or

Quoted 10 lines

speakers.

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and "Independent", or such. An enum with "ON" and "OFF" is no sensible choice.

Quoted 5 lines
Quoted 2 lines

Takashi

Use "Independent HP" just because patch_via.c already used it so it is better to use a standard name for all hda codecs

Yeah, I know. But this name is confusing, so better to change in patch_via.c as well.

Takashi

#8 lore raw

2011/5/6 Takashi Iwai <[email protected]>

Quoted 11 lines
Quoted 4 lines

Use "Independent HP" just because patch_via.c already used it so it is better to use a standard name for all hda codecs

Yeah, I know. But this name is confusing, so better to change in patch_via.c as well.

Takashi

To force pulseaudio to get the correct subdevice for via codec, you may need to add "subdevice 0" to HDA-intel.conf

since subdevice 0 support multichannel but subdevice 1 only support stereo

    playback.pcm {
        type softvol
        slave.pcm {
            type hw
            card $CARD
+          subdevice 0
        }
        control {
            name "PCM Playback Volume"
            card $CARD
        }
    }

HDA-Intel.pcm.surround40.0 cards.HDA-Intel.pcm.front.0 HDA-Intel.pcm.surround51.0 cards.HDA-Intel.pcm.front.0 HDA-Intel.pcm.surround71.0 cards.HDA-Intel.pcm.front.0

#9 lore raw

At Sat, 7 May 2011 11:48:19 +0800,

Quoted 21 lines · Raymond Yau

2011/5/6 Takashi Iwai <[email protected]>

Quoted 11 lines
Quoted 4 lines

Use "Independent HP" just because patch_via.c already used it so it is better to use a standard name for all hda codecs

Yeah, I know. But this name is confusing, so better to change in patch_via.c as well.

Takashi

To force pulseaudio to get the correct subdevice for via codec, you may need to add "subdevice 0" to HDA-intel.conf

since subdevice 0 support multichannel but subdevice 1 only support stereo

Quoted 12 lines
    playback.pcm {
        type softvol
        slave.pcm {
            type hw
            card $CARD
+          subdevice 0
        }
        control {
            name "PCM Playback Volume"
            card $CARD
        }
    }

OK, fixed now. Thanks.

Takashi

#10 lore raw

2011/5/9 Takashi Iwai <[email protected]>

Quoted 39 lines

At Sat, 7 May 2011 11:48:19 +0800,

Quoted 6 lines · Raymond Yau

2011/5/6 Takashi Iwai <[email protected]>

Quoted 3 lines
Quoted 3 lines

Use "Independent HP" just because patch_via.c already used it so it

is

Quoted 10 lines
Quoted 8 lines
Quoted 1 line

better to use a standard name for all hda codecs

Yeah, I know. But this name is confusing, so better to change in patch_via.c as well.

Takashi

To force pulseaudio to get the correct subdevice for via codec, you may

need

Quoted 3 lines

to add "subdevice 0" to HDA-intel.conf

since subdevice 0 support multichannel but subdevice 1 only support

stereo

Quoted 14 lines

    playback.pcm {
        type softvol
        slave.pcm {
            type hw
            card $CARD
+          subdevice 0
        }
        control {
            name "PCM Playback Volume"
            card $CARD
        }
    }
Quoted 5 lines

OK, fixed now. Thanks.

Takashi

But dmix still fail and you cannot use dmix with subdevice 1

Quoted 1 line
Quoted 1 line

I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and

"Independent", or such. An enum with "ON" and "OFF" is no sensible choice.

The main point is how can the user find out which subdevice or device is used for "Headphone Stream"

Neither "aplay -l " nor "aplay -L' provide any useful information to the user

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1

#11 lore raw

At Tue, 10 May 2011 14:42:45 +0800,

Quoted 42 lines · Raymond Yau

2011/5/9 Takashi Iwai <[email protected]>

Quoted 39 lines

At Sat, 7 May 2011 11:48:19 +0800,

Quoted 6 lines · Raymond Yau

2011/5/6 Takashi Iwai <[email protected]>

Quoted 3 lines
Quoted 3 lines

Use "Independent HP" just because patch_via.c already used it so it

is

Quoted 10 lines
Quoted 8 lines
Quoted 1 line

better to use a standard name for all hda codecs

Yeah, I know. But this name is confusing, so better to change in patch_via.c as well.

Takashi

To force pulseaudio to get the correct subdevice for via codec, you may

need

Quoted 3 lines

to add "subdevice 0" to HDA-intel.conf

since subdevice 0 support multichannel but subdevice 1 only support

stereo

Quoted 14 lines

    playback.pcm {
        type softvol
        slave.pcm {
            type hw
            card $CARD
+          subdevice 0
        }
        control {
            name "PCM Playback Volume"
            card $CARD
        }
    }
Quoted 7 lines
Quoted 5 lines

OK, fixed now. Thanks.

Takashi

But dmix still fail and you cannot use dmix with subdevice 1

Please elaborate. You can use dmix with subdevice 1 when you write your own config. "front" definition is not for other but the primary device. It's no definition for every output device.

Quoted 8 lines
Quoted 1 line
Quoted 1 line

I'd name it differently, e.g. "Headphone Stream Mode" taking "Slave" and

"Independent", or such. An enum with "ON" and "OFF" is no sensible choice.

The main point is how can the user find out which subdevice or device is used for "Headphone Stream"

Neither "aplay -l " nor "aplay -L' provide any useful information to the user

Yeah, because there is no standard definition for such streams. We need to start from defining it at first.

Takashi

#12 lore raw
In reply to Raymond Yau

Il 04/05/2011 17:42, Raymond Yau ha scritto:

Quoted 22 lines

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones or speakers.

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

Add an "Independent HP" switch to turn this feature on/off for desktop for those HDA codec

Test:
1) speaker-test -c 8 -t wav -Dhw:0,0
2) speaker-test -c 2 -t wav -Dhw:0,2

Quoted 8 lines

It will need modification to support this feature for those desktop with 8 channels codec

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

So i made the test, i correctly hear the tests, 7 outputs for the rear panel, and 2 for the front, but when i play the first test, i hear on the front panel some noise and realy crackly and whispered the tests when front left and front right are played, i guess it is not normal, may this help?

Signature · 4 lines
*Email:* [email protected]
*Cellulare:* +39.3394768306
*Gtalk:* [email protected]
*LinkedIn:* http://www.linkedin.com/pub/valerio-tesei/22/a87/577
#13 lore raw

2011/5/6 Valerio Tesei <[email protected]>

Quoted 26 lines

Il 04/05/2011 17:42, Raymond Yau ha scritto:

Quoted 4 lines

Request for testers to test the patch

Multistreaming allows you to listen to one audio source through the back panel speakers and a second audio source through front panel headphones

or

Quoted 7 lines

speakers.

Hardware requirement
1) 10 channels realtek codec (e.g. alc892) which already work with model=auto
2) Headphone at front panel and Line out at rear panel

Quoted 5 lines

"hw:0,0" is used for the rear panel audio jack
"hw:0,2" is used for the front panel headphone when "Independent HP" is switched ON

Add an "Independent HP" switch to turn this feature on/off for desktop

for

Quoted 7 lines

those HDA codec

Test:
1) speaker-test -c 8 -t wav -Dhw:0,0
2) speaker-test -c 2 -t wav -Dhw:0,2

It will need modification to support this feature for those desktop with

Quoted 9 lines

8

Quoted 2 lines

channels codec

So i made the test, i correctly hear the tests, 7 outputs for the rear panel, and 2 for the front, but when i play the first test, i hear on the front panel some noise and realy crackly and whispered the tests when front left and front right are played, i guess it is not normal, may this help?

using hda-emu , it seem that the "Headpone Playback Switch" still using 0x0c instead of 0x26

Quoted 1 line

get 11

send: NID=0x1b, VERB=0xba0(get_amp_gain_mute,O:L#0), PARM=0x0
receive: 0x0
send: NID=0x1b, VERB=0xb80(get_amp_gain_mute,O:R#0), PARM=0x0
receive: 0x0
11 Headphone Playback Switch:0
MIN/MAX: 0/1, VAL: [1] [1]

Quoted 1 line

set 11 0 0

send: NID=0xc, VERB=0xb20(get_amp_gain_mute,I:L#0), PARM=0x0
receive: 0x0
send: NID=0xc, VERB=0xb00(get_amp_gain_mute,I:R#0), PARM=0x0
receive: 0x0
send: NID=0x1b, VERB=0x3a0(set_amp_gain_mute,O:L#0), PARM=0x80
send: NID=0x1b, VERB=0x390(set_amp_gain_mute,O:R#0), PARM=0x80

Quoted 1 line

set 11 1 1

send: NID=0x1b, VERB=0x3a0(set_amp_gain_mute,O:L#0), PARM=0x0
send: NID=0x1b, VERB=0x390(set_amp_gain_mute,O:R#0), PARM=0x0

Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0

    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001373e: IN OUT HP EAPD Detect Trigger
    Vref caps: HIZ 50 GRD 80 100
  EAPD 0x0:
  Pin Default 0x02214820: [Jack] HP Out at Ext Front
    Conn = 1/8, Color = Green
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP VREF_HIZ
  Unsolicited: tag=04, enabled=1
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
  Connection: 5
     0x0c 0x0d 0x0e 0x0f 0x26*