Skip to contentSkip to conversation

Add support for MediaTek AHCI SATA

PATCH Superseded Ryder Lee 1 participant 3 messages Aug 1, 2017

Subsystems (3)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Ryder Lee

author
#0 lore raw

cover Add support for MediaTek AHCI SATA

Hi,

This patch series add support for AHCI compatible SATA controller, and it is compliant with the ahci 1.3 and sata 3.0 specification. This driver is slightly different than ahci_platform.c (e.g., reset control, subsystem setting).

changes since v1:
- update binding text: add missing "specifier pairs" descriptions.
- fix kbuild test warning: fix the error handling.

Ryder Lee (2):
ata: mediatek: add support for MediaTek SATA controller
dt-bindings: ata: add DT bindings for MediaTek SATA controller

 Documentation/devicetree/bindings/ata/ahci-mtk.txt |  50 ++++++
 drivers/ata/Kconfig                                |  10 ++
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci_mtk.c                             | 196 +++++++++++++++++++++
 4 files changed, 257 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
 create mode 100644 drivers/ata/ahci_mtk.c
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH 1/2 ata: mediatek: add support for MediaTek SATA controller

This adds support the AHCI-compliant Serial ATA controller present on MediaTek SoCs.

---
 drivers/ata/Kconfig    |  10 +++
 drivers/ata/Makefile   |   1 +
 drivers/ata/ahci_mtk.c | 196 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 207 insertions(+)
 create mode 100644 drivers/ata/ahci_mtk.c
drivers/ata/Kconfig +10 -0
index 948fc86..7d3eb47 100644
@@ -153,6 +153,16 @@ config AHCI_CEVA
 
 	  If unsure, say N.
 
+config AHCI_MTK
+	tristate "MediaTek AHCI SATA support"
+	depends on ARCH_MEDIATEK
+	select MFD_SYSCON
+	help
+	  This option enables support for the MediaTek SoC's
+	  onboard AHCI SATA controller.
+
+	  If unsure, say N.
+
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU
drivers/ata/Makefile +1 -0
index a26ef5a..ff9cd2e 100644
@@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_CEVA)		+= ahci_ceva.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DM816)	+= ahci_dm816.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_MTK)		+= ahci_mtk.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_MVEBU)	+= ahci_mvebu.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_OCTEON)	+= ahci_octeon.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o
drivers/ata/ahci_mtk.c new file +196 -0

196 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#2 lore raw

PATCH 2/2 dt-bindings: ata: add DT bindings for MediaTek SATA controller

In reply to Ryder Lee

Add DT bindings for the onboard SATA controller present on the MediaTek SoCs.

---
 Documentation/devicetree/bindings/ata/ahci-mtk.txt | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-mtk.txt
Documentation/devicetree/bindings/ata/ahci-mtk.txt new file +50 -0
new file mode 100644
index 0000000..8f64f15
@@ -0,0 +1,50 @@
+MediaTek Seria ATA controller
+
+Required properties:
+ - compatible	   : Must be "mediatek,ahci".
+ - reg		   : Physical base addresses and length of register sets.
+ - interrupts	   : Interrupt associated with the SATA device.
+ - interrupt-names : Associated name must be: "hostc".
+ - clocks	   : A list of phandle and clock specifier pairs, one for each
+		     entry in clock-names.
+ - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
+ - phys		   : A phandle and PHY specifier pair for the PHY port.
+ - phy-names	   : Associated name must be: "sata-phy".
+ - ports-implemented : Mask that indicates which ports that the HBA supports
+		       are available for software to use. Useful if PORTS_IMPL
+		       is not programmed by the BIOS, which is true with some
+		       embedded SOC's.
+
+Optional properties:
+ - power-domains   : A phandle and power domain specifier pair to the power
+		     domain which is responsible for collapsing and restoring
+		     power to the peripheral.
+ - resets	   : Must contain an entry for each entry in reset-names.
+		     See ../reset/reset.txt for details.
+ - reset-names	   : Associated names must be: "axi-rst", "sw-rst", "reg-rst".
+ - mediatek,phy-mode : A phandle to the system controller, used to enable
+		       SATA function.
+
+Example:
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,ahci";
+		reg = <0 0x1a200000 0 0x1100>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		clocks = <&pciesys CLK_SATA_AHB_EN>,
+			 <&pciesys CLK_SATA_AXI_EN>,
+			 <&pciesys CLK_SATA_ASIC_EN>,
+			 <&pciesys CLK_SATA_RBC_EN>,
+			 <&pciesys CLK_SATA_PM_EN>;
+		clock-names = "ahb", "axi", "asic", "rbc", "pm";
+		phys = <&u3port1 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			 <&pciesys MT7622_SATA_PHY_SW_RST>,
+			 <&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi-rst", "sw-rst", "reg-rst";
+		mediatek,phy-mode = <&pciesys>;
+	};
Signature · 1 line
1.9.1