Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
PATCH 1/1 Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
This reverts commit 346df7d4fa62afc578d820b3a18815eec765074f.
This patch broke booting Rockchip systems from U-Boot residing on SPI flash, for at least the Pinebook Pro and Rockpro64, and also confirmed with the not yet upstream Helios64.
--- drivers/spi/spi-uclass.c | 11 ----------- 1 file changed, 11 deletions(-)
drivers/spi/spi-uclass.c +0 -11
@@ -11,7 +11,6 @@#include <log.h> #include <malloc.h> #include <spi.h> -#include <spi-mem.h> #include <dm/device_compat.h> #include <asm/global_data.h> #include <dm/device-internal.h>
@@ -200,16 +199,6 @@ static int spi_post_probe(struct udevice *bus) ops->set_mode += gd->reloc_off;if (ops->cs_info) ops->cs_info += gd->reloc_off; -if (ops->mem_ops) { -struct spi_controller_mem_ops *mem_ops = - (struct spi_controller_mem_ops *)ops->mem_ops; -if (mem_ops->adjust_op_size) - mem_ops->adjust_op_size += gd->reloc_off; -if (mem_ops->supports_op) - mem_ops->supports_op += gd->reloc_off; -if (mem_ops->exec_op) - mem_ops->exec_op += gd->reloc_off; - } reloc_done++; }#endif
Signature · 1 line
2.31.1
Quoted 35 lines · Peter Robinson
This reverts commit
346df7d4fa62afc578d820b3a18815eec765074f.This patch broke booting Rockchip systems from U-Boot residing on SPI flash, for at least the Pinebook Pro and Rockpro64, and also confirmed with the not yet upstream Helios64.
Signed-off-by Peter Robinson <[email protected]>Cc T Karthik Reddy <[email protected]>Cc Ashok Reddy Soma <[email protected]>Cc Michal Simek <[email protected]>Cc Pratyush Yadav <[email protected]>--- drivers/spi/spi-uclass.c | 11 ----------- 1 file changed, 11 deletions(-)drivers/spi/spi-uclass.c +0
-4@@ -11,7 +11,6 @@#include <log.h> #include <malloc.h> #include <spi.h> -#include <spi-mem.h> #include <dm/device_compat.h> #include <asm/global_data.h> #include <dm/device-internal.h> @@ -200,16 +199,6 @@ static int spi_post_probe(struct udevice *bus) ops->set_mode += gd->reloc_off;if (ops->cs_info) ops->cs_info += gd->reloc_off; -if (ops->mem_ops) { -struct spi_controller_mem_ops *mem_ops = - (struct spi_controller_mem_ops *)ops->mem_ops;
drivers/spi/spi-uclass.c static int spi_post_probe(struct udevice *bus) · line 204
Quoted 10 lines
drivers/spi/spi-uclass.c +0
-7-if (mem_ops->adjust_op_size) - mem_ops->adjust_op_size += gd->reloc_off; -if (mem_ops->supports_op) - mem_ops->supports_op += gd->reloc_off; -if (mem_ops->exec_op) - mem_ops->exec_op += gd->reloc_off; - } reloc_done++; }#endif
This is protected by CONFIG_NEEDS_MANUAL_RELOC which is only enable for m68k and microblaze. I expect rockchip is arm and you should never have this code in your binary. That's why please double check it.
Thanks,
Michal
Quoted 44 lines · Michal Simek
Quoted 41 lines · Peter Robinson
This reverts commit
346df7d4fa62afc578d820b3a18815eec765074f.This patch broke booting Rockchip systems from U-Boot residing on SPI flash, for at least the Pinebook Pro and Rockpro64, and also confirmed with the not yet upstream Helios64.
Signed-off-by Peter Robinson <[email protected]>Cc T Karthik Reddy <[email protected]>Cc Ashok Reddy Soma <[email protected]>Cc Michal Simek <[email protected]>Cc Pratyush Yadav <[email protected]>--- drivers/spi/spi-uclass.c | 11 ----------- 1 file changed, 11 deletions(-)drivers/spi/spi-uclass.c +0
-11@@ -11,7 +11,6 @@#include <log.h> #include <malloc.h> #include <spi.h> -#include <spi-mem.h> #include <dm/device_compat.h> #include <asm/global_data.h> #include <dm/device-internal.h> @@ -200,16 +199,6 @@ static int spi_post_probe(struct udevice *bus) ops->set_mode += gd->reloc_off;if (ops->cs_info) ops->cs_info += gd->reloc_off; -if (ops->mem_ops) { -struct spi_controller_mem_ops *mem_ops = - (struct spi_controller_mem_ops *)ops->mem_ops; -if (mem_ops->adjust_op_size) - mem_ops->adjust_op_size += gd->reloc_off; -if (mem_ops->supports_op) - mem_ops->supports_op += gd->reloc_off; -if (mem_ops->exec_op) - mem_ops->exec_op += gd->reloc_off; - }
Quoted 8 lines
drivers/spi/spi-uclass.c static int spi_post_probe(struct udevice *bus) · line 204
Quoted 4 lines
drivers/spi/spi-uclass.c +0
-0reloc_done++; }#endif This is protected by
CONFIG_NEEDS_MANUAL_RELOCwhich is only enable for m68k and microblaze. I expect rockchip is arm and you should never have this code in your binary. That's why please double check it.
Yes, this really doesn't make sense. Try also just removing spi-mem.h from the file and see if that causes things to work again. If so, time to dig in to that header file to figure out what could be going wrong.
Signature · 1 line
Tom
removing the header is not sufficient to have the boards booting from SPI.
U-Boot TPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57 -0500) Trying to boot from SPI
At this point u-boot hangs, with the patch reverted I get the following U-Boot TPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500) Trying to boot from SPI
U-Boot 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500)
SoC: Rockchip rk3399 Reset cause: RST Model: Kobol Helios64 Revision: 0.0 - Unknown DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
In: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Kobol Helios64 Revision: UNKNOWN Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdio
busNo ethernet found.
starting USB...
Bus usb@fe900000: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe900000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Scanning disk [email protected]...
Scanning disk [email protected]...
** Unrecognized filesystem type **
Found 5 disksdw_dm_mdio_init: mdio node is missing, registering legacy mdiobusdw_dm_mdio_init: mdio node is missing, registering legacy mdio busLoading Boot0000 'Fedora' failed
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
Quoted 61 lines · Tom Rini
Quoted 44 lines · Michal Simek
Quoted 41 lines · Peter Robinson
This reverts commit
346df7d4fa62afc578d820b3a18815eec765074f.This patch broke booting Rockchip systems from U-Boot residing on SPI flash, for at least the Pinebook Pro and Rockpro64, and also confirmed with the not yet upstream Helios64.
Signed-off-by Peter Robinson <[email protected]>Cc T Karthik Reddy <[email protected]>Cc Ashok Reddy Soma <[email protected]>Cc Michal Simek <[email protected]>Cc Pratyush Yadav <[email protected]>--- drivers/spi/spi-uclass.c | 11 ----------- 1 file changed, 11 deletions(-)drivers/spi/spi-uclass.c +0
-11@@ -11,7 +11,6 @@#include <log.h> #include <malloc.h> #include <spi.h> -#include <spi-mem.h> #include <dm/device_compat.h> #include <asm/global_data.h> #include <dm/device-internal.h> @@ -200,16 +199,6 @@ static int spi_post_probe(struct udevice *bus) ops->set_mode += gd->reloc_off;if (ops->cs_info) ops->cs_info += gd->reloc_off; -if (ops->mem_ops) { -struct spi_controller_mem_ops *mem_ops = - (struct spi_controller_mem_ops *)ops->mem_ops; -if (mem_ops->adjust_op_size) - mem_ops->adjust_op_size += gd->reloc_off; -if (mem_ops->supports_op) - mem_ops->supports_op += gd->reloc_off; -if (mem_ops->exec_op) - mem_ops->exec_op += gd->reloc_off; - }Quoted 8 lines
drivers/spi/spi-uclass.c static int spi_post_probe(struct udevice *bus) · line 204
Quoted 4 lines
drivers/spi/spi-uclass.c +0
-0reloc_done++; }#endif This is protected by
CONFIG_NEEDS_MANUAL_RELOCwhich is only enable for m68k and microblaze. I expect rockchip is arm and you should never have this code in your binary. That's why please double check it.Yes, this really doesn't make sense. Try also just removing
spi-mem.hfrom the file and see if that causes things to work again. If so, time to dig in to that header file to figure out what could be going wrong.--
Tom
Quoted 69 lines · Dennis Gilmore
removing the header is not sufficient to have the boards booting from SPI.
U-Boot TPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57 -0500) Trying to boot from SPI
At this point u-boot hangs, with the patch reverted I get the following U-Boot TPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500) Trying to boot from SPI
U-Boot 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500)
SoC: Rockchip rk3399 Reset cause: RST Model: Kobol Helios64 Revision: 0.0 - Unknown DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, mmc@fe330000: 0Loading Environment from SPIFlash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environmentIn: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Kobol Helios64 Revision: UNKNOWN Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdiobusNo ethernet found.
starting USB...
Bus usb@fe900000: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe900000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Scanning disk [email protected]...
Quoted 8 lines
Scanning disk [email protected]...
** Unrecognized filesystem type **
Found 5 disksdw_dm_mdio_init: mdio node is missing, registering legacy mdiobusdw_dm_mdio_init: mdio node is missing, registering legacy mdio busLoading Boot0000 'Fedora' failed
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
Is LTO on, on these platforms? That code in question really should not be enabled, at all. Like, if you toss an #error in that section of code, it should still build. It does, right?
Signature · 1 line
Tom
Quoted 81 lines · Tom Rini
Quoted 69 lines · Dennis Gilmore
removing the header is not sufficient to have the boards booting from SPI.
U-Boot TPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57 -0500) Trying to boot from SPI
At this point u-boot hangs, with the patch reverted I get the following U-Boot TPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500) Trying to boot from SPI
U-Boot 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500)
SoC: Rockchip rk3399 Reset cause: RST Model: Kobol Helios64 Revision: 0.0 - Unknown DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, mmc@fe330000: 0Loading Environment from SPIFlash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environmentIn: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Kobol Helios64 Revision: UNKNOWN Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdiobusNo ethernet found.
starting USB...
Bus usb@fe900000: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe900000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Scanning disk [email protected]...Quoted 8 lines
Scanning disk [email protected]...
** Unrecognized filesystem type **
Found 5 disksdw_dm_mdio_init: mdio node is missing, registering legacy mdiobusdw_dm_mdio_init: mdio node is missing, registering legacy mdio busLoading Boot0000 'Fedora' failed
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
Quoted 3 lines
Is LTO on, on these platforms? That code in question really should not be enabled, at all. Like, if you toss an #error in that section of code, it should still build. It does, right?
It does still build if I put a #error in the middle of it
$ grep LTO .config CONFIG_ARCH_SUPPORTS_LTO=y # CONFIG_LTO is not set
LTO is not on
Quoted 2 lines
--
Tom
Quoted 86 lines · Dennis Gilmore
Quoted 81 lines · Tom Rini
Quoted 69 lines · Dennis Gilmore
removing the header is not sufficient to have the boards booting from SPI.
U-Boot TPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57 -0500) Trying to boot from SPI
At this point u-boot hangs, with the patch reverted I get the following U-Boot TPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500) Trying to boot from SPI
U-Boot 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500)
SoC: Rockchip rk3399 Reset cause: RST Model: Kobol Helios64 Revision: 0.0 - Unknown DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, mmc@fe330000: 0Loading Environment from SPIFlash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environmentIn: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Kobol Helios64 Revision: UNKNOWN Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdiobusNo ethernet found.
starting USB...
Bus usb@fe900000: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe900000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Scanning disk [email protected]...Quoted 8 lines
Scanning disk [email protected]...
** Unrecognized filesystem type **
Found 5 disksdw_dm_mdio_init: mdio node is missing, registering legacy mdiobusdw_dm_mdio_init: mdio node is missing, registering legacy mdio busLoading Boot0000 'Fedora' failed
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efiQuoted 3 lines
Is LTO on, on these platforms? That code in question really should not be enabled, at all. Like, if you toss an #error in that section of code, it should still build. It does, right?
Quoted 8 lines
It does still build if I put a #error in the middle of it
$ grep LTO .config CONFIG_ARCH_SUPPORTS_LTO=y # CONFIG_LTO is not setLTO is not on
OK, so progress. What toolchain are you using here? And can you easily re-test with one of the kernel.org ones, or if using one already 9.2.0 (or 11.1.0) ?
Signature · 1 line
Tom
Quoted 95 lines · Tom Rini
Quoted 93 lines · Dennis Gilmore
Quoted 81 lines · Tom Rini
Quoted 69 lines · Dennis Gilmore
removing the header is not sufficient to have the boards booting from SPI.
U-Boot TPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57 -0500) Trying to boot from SPI
At this point u-boot hangs, with the patch reverted I get the following U-Boot TPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500) Trying to boot from SPI
U-Boot 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500)
SoC: Rockchip rk3399 Reset cause: RST Model: Kobol Helios64 Revision: 0.0 - Unknown DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, mmc@fe330000: 0Loading Environment from SPIFlash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environmentIn: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Kobol Helios64 Revision: UNKNOWN Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdiobusNo ethernet found.
starting USB...
Bus usb@fe900000: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe900000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Scanning disk [email protected]...Quoted 8 lines
Scanning disk [email protected]...
** Unrecognized filesystem type **
Found 5 disksdw_dm_mdio_init: mdio node is missing, registering legacy mdiobusdw_dm_mdio_init: mdio node is missing, registering legacy mdio busLoading Boot0000 'Fedora' failed
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efiQuoted 3 lines
Is LTO on, on these platforms? That code in question really should not be enabled, at all. Like, if you toss an #error in that section of code, it should still build. It does, right?
It does still build if I put a #error in the middle of it
$ grep LTO .config CONFIG_ARCH_SUPPORTS_LTO=y # CONFIG_LTO is not set
Quoted 5 lines
Quoted 1 line
LTO is not on
OK, so progress. What toolchain are you using here? And can you easily re-test with one of the kernel.org ones, or if using one already 9.2.0 (or 11.1.0) ?
I have been using gcc 10.2.1, I will test with 11.1.1
Dennis
Quoted 2 lines
--
Tom
Quoted 96 lines · Dennis Gilmore
Quoted 95 lines · Tom Rini
Quoted 93 lines · Dennis Gilmore
Quoted 81 lines · Tom Rini
Quoted 69 lines · Dennis Gilmore
removing the header is not sufficient to have the boards booting from SPI.
U-Boot TPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0 Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00768-g49373a3334-dirty (Jul 23 2021 - 20:42:57 -0500) Trying to boot from SPI
At this point u-boot hangs, with the patch reverted I get the following U-Boot TPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51) Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB 256B stridelpddr4_set_rate: change freq to 400000000 mhz 0, 1lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500) Trying to boot from SPI
U-Boot 2021.07-00769-g4af8bd872c-dirty (Jul 23 2021 - 21:20:51 -0500)
SoC: Rockchip rk3399 Reset cause: RST Model: Kobol Helios64 Revision: 0.0 - Unknown DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe320000: 1, mmc@fe330000: 0Loading Environment from SPIFlash... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environmentIn: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Kobol Helios64 Revision: UNKNOWN Net: dw_dm_mdio_init: mdio node is missing, registering legacy mdiobusNo ethernet found.
starting USB...
Bus usb@fe900000: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe900000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Scanning disk [email protected]...Quoted 8 lines
Scanning disk [email protected]...
** Unrecognized filesystem type **
Found 5 disksdw_dm_mdio_init: mdio node is missing, registering legacy mdiobusdw_dm_mdio_init: mdio node is missing, registering legacy mdio busLoading Boot0000 'Fedora' failed
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efiQuoted 3 lines
Is LTO on, on these platforms? That code in question really should not be enabled, at all. Like, if you toss an #error in that section of code, it should still build. It does, right?
It does still build if I put a #error in the middle of it
$ grep LTO .config CONFIG_ARCH_SUPPORTS_LTO=y # CONFIG_LTO is not set
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
LTO is not on
OK, so progress. What toolchain are you using here? And can you easily re-test with one of the kernel.org ones, or if using one already 9.2.0 (or 11.1.0) ?
I have been using gcc 10.2.1, I will test with 11.1.1
Did you have a chance to further investigate this?
Signature · 1 line
Tom