Skip to contentSkip to conversation

5.4.189-rc1 review

PATCH In review Greg Kroah-Hartman 9 participants 486 messages Apr 14, 2022 – Apr 15, 2022 Page 2 of 3

Subsystems (8)
lore
Share & tools
lore
author maintainer
#160 lore raw

PATCH 158/475 udmabuf: validate ubuf->pagecount

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 2b6dd600dd72573c23ea180b5b0b2f1813405882 ]

Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The problem was in ubuf->pages == ZERO_PTR.

ubuf->pagecount is calculated from arguments passed from user-space. If user creates udmabuf with list.size == 0 then ubuf->pagecount will be also equal to zero; it causes kmalloc_array() to return ZERO_PTR.

Fix it by validating ubuf->pagecount before passing it to kmalloc_array().

---
 drivers/dma-buf/udmabuf.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/dma-buf/udmabuf.c +4 -0
index 9635897458a0..e553c6a937f6 100644
@@ -145,6 +145,10 @@ static long udmabuf_create(const struct udmabuf_create_list *head,
 		if (ubuf->pagecount > pglimit)
 			goto err;
 	}
+
+	if (!ubuf->pagecount)
+		goto err;
+
 	ubuf->pages = kmalloc_array(ubuf->pagecount, sizeof(*ubuf->pages),
 				    GFP_KERNEL);
 	if (!ubuf->pages) {
Signature · 1 line
2.34.1
author maintainer
#161 lore raw

PATCH 159/475 Bluetooth: hci_serdev: call init_rwsem() before p->open()

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 9d7cbe2b9cf5f650067df4f402fdd799d4bbb4e1 ]

kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem. The problem was in wrong place for percpu_init_rwsem() call.

hci_uart_proto::open() may register a timer whose callback may call hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device() thread won't be fast enough to call percpu_init_rwsem().

Fix it my moving percpu_init_rwsem() call before p->open().

INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator.

CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9
...
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 assign_lock_key kernel/locking/lockdep.c:951 [inline]
 register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263
 __lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906
 lock_acquire kernel/locking/lockdep.c:5637 [inline]
 lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602
 percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline]
 hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124
 h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188
 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
Fixes d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
---
 drivers/bluetooth/hci_serdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/bluetooth/hci_serdev.c +2 -1
index 1b4ad231e6ed..fd081bdd2dd8 100644
@@ -279,6 +279,8 @@ int hci_uart_register_device(struct hci_uart *hu,
 	if (err)
 		return err;
 
+	percpu_init_rwsem(&hu->proto_lock);
+
 	err = p->open(hu);
 	if (err)
 		goto err_open;
@@ -301,7 +303,6 @@ int hci_uart_register_device(struct hci_uart *hu,
 
 	INIT_WORK(&hu->init_ready, hci_uart_init_work);
 	INIT_WORK(&hu->write_work, hci_uart_write_work);
-	percpu_init_rwsem(&hu->proto_lock);
 
 	/* Only when vendor specific setup callback is provided, consider
 	 * the manufacturer information valid. This avoids filling in the
Signature · 1 line
2.34.1
author maintainer
#162 lore raw

PATCH 160/475 mtd: onenand: Check for error irq

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 3e68f331c8c759c0daa31cc92c3449b23119a215 ]

For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq().
Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now.

Fixes 2c22120fbd01 ("MTD: OneNAND: interrupt based wait support")
---
 drivers/mtd/nand/onenand/generic.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/mtd/nand/onenand/generic.c +6 -1
index 8b6f4da5d720..a4b8b65fe15f 100644
@@ -53,7 +53,12 @@ static int generic_onenand_probe(struct platform_device *pdev)
 	}
 
 	info->onenand.mmcontrol = pdata ? pdata->mmcontrol : NULL;
-	info->onenand.irq = platform_get_irq(pdev, 0);
+
+	err = platform_get_irq(pdev, 0);
+	if (err < 0)
+		goto out_iounmap;
+
+	info->onenand.irq = err;
 
 	info->mtd.dev.parent = &pdev->dev;
 	info->mtd.priv = &info->onenand;
Signature · 1 line
2.34.1
author maintainer
#163 lore raw

PATCH 161/475 mtd: rawnand: gpmi: fix controller timings setting

In reply to Greg Kroah-Hartman

From: Dario Binacchi <[email protected]>

[ Upstream commit 2970bf5a32f079e1e9197411db4fe9faccb1503a ]

Set the controller registers according to the real clock rate. The controller registers configuration (setup, hold, timeout, ... cycles) depends on the clock rate of the GPMI. Using the real rate instead of the ideal one, avoids that this inaccuracy (required_rate - real_rate) affects the registers setting.

This patch has been tested on two custom boards with i.MX28 and i.MX6 SOCs:
- i.MX28:
required rate 100MHz, real rate 99.3MHz
- i.MX6
required rate 100MHz, real rate 99MHz

---
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +3 -0
index ab2f824abf54..02218c3b548f 100644
@@ -645,6 +645,7 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
 				     const struct nand_sdr_timings *sdr)
 {
 	struct gpmi_nfc_hardware_timing *hw = &this->hw;
+	struct resources *r = &this->resources;
 	unsigned int dll_threshold_ps = this->devdata->max_chain_delay;
 	unsigned int period_ps, reference_period_ps;
 	unsigned int data_setup_cycles, data_hold_cycles, addr_setup_cycles;
@@ -668,6 +669,8 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this,
 		wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
 	}
 
+	hw->clk_rate = clk_round_rate(r->clock[0], hw->clk_rate);
+
 	/* SDR core timings are given in picoseconds */
 	period_ps = div_u64((u64)NSEC_PER_SEC * 1000, hw->clk_rate);
 
Signature · 1 line
2.34.1
author maintainer
#164 lore raw

PATCH 162/475 drm/edid: Dont clear formats if using deep color

In reply to Greg Kroah-Hartman

From: Maxime Ripard <[email protected]>

[ Upstream commit 75478b3b393bcbdca4e6da76fe3a9f1a4133ec5d ]

The current code, when parsing the EDID Deep Color depths, that the YUV422 cannot be used, referring to the HDMI 1.3 Specification.

This specification, in its section 6.2.4, indeed states:

For each supported Deep Color mode, RGB 4:4:4 shall be supported and optionally YCBCR 4:4:4 may be supported.

YCBCR 4:2:2 is not permitted for any Deep Color mode.

This indeed can be interpreted like the code does, but the HDMI 1.4 specification further clarifies that statement in its section 6.2.4:

For each supported Deep Color mode, RGB 4:4:4 shall be supported and optionally YCBCR 4:4:4 may be supported.

YCBCR 4:2:2 is also 36-bit mode but does not require the further use of the Deep Color modes described in section 6.5.2 and 6.5.3.

This means that, even though YUV422 can be used with 12 bit per color, it shouldn't be treated as a deep color mode.

This is also broken with YUV444 if it's supported by the display, but DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear color_formats of the YUV444 support set previously in drm_parse_cea_ext(), but will not set it back.

Since the formats supported are already setup properly in drm_parse_cea_ext(), let's just remove the code modifying the formats in drm_parse_hdmi_deep_color_info()

Fixes d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
---
 drivers/gpu/drm/drm_edid.c |    8 --------
 1 file changed, 8 deletions(-)
drivers/gpu/drm/drm_edid.c +0 -8
@@ -4534,16 +4534,8 @@ static void drm_parse_hdmi_deep_color_in
 		  connector->name, dc_bpc);
 	info->bpc = dc_bpc;
 
-	/*
-	 * Deep color support mandates RGB444 support for all video
-	 * modes and forbids YCRCB422 support for all video modes per
-	 * HDMI 1.3 spec.
-	 */
-	info->color_formats = DRM_COLOR_FORMAT_RGB444;
-
 	/* YCRCB444 is optional according to spec. */
 	if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
-		info->color_formats |= DRM_COLOR_FORMAT_YCRCB444;
 		DRM_DEBUG("%s: HDMI sink does YCRCB444 in deep color.\n",
 			  connector->name);
 	}
author maintainer
#165 lore raw

PATCH 163/475 drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()

In reply to Greg Kroah-Hartman

From: Zhou Qingyang <[email protected]>

[ Upstream commit 588a70177df3b1777484267584ef38ab2ca899a2 ]

In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode() is assigned to mode and is passed to drm_mode_probed_add() directly after that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and there is a dereference of it in list_add_tail() without recoveries, which could lead to NULL pointer dereference on failure of amdgpu_dm_create_common_mode().

Fix this by adding a NULL check of mode.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.

Fixes e7b07ceef2a6 ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +3 -0
index 8e4d863c7570..29f8b4bd5a76 100644
@@ -5013,6 +5013,9 @@ static void amdgpu_dm_connector_add_common_modes(struct drm_encoder *encoder,
 		mode = amdgpu_dm_create_common_mode(encoder,
 				common_modes[i].name, common_modes[i].w,
 				common_modes[i].h);
+		if (!mode)
+			continue;
+
 		drm_mode_probed_add(connector, mode);
 		amdgpu_dm_connector->num_modes++;
 	}
Signature · 1 line
2.34.1
author maintainer
#166 lore raw

PATCH 164/475 ath9k_htc: fix uninit value bugs

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]

Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization.

In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0.

htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy

Fail logs:

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275

...

Uninit was created at:

 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258

...

Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275

...

Uninit was created at:

 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258

...

Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

Fixes fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by [email protected]
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/net/wireless/ath/ath9k/htc_hst.c +5 -0
index 510e61e97dbc..994ec48b2f66 100644
@@ -30,6 +30,7 @@ static int htc_issue_send(struct htc_target *target, struct sk_buff* skb,
 	hdr->endpoint_id = epid;
 	hdr->flags = flags;
 	hdr->payload_len = cpu_to_be16(len);
+	memset(hdr->control, 0, sizeof(hdr->control));
 
 	status = target->hif->send(target->hif_dev, endpoint->ul_pipeid, skb);
 
@@ -272,6 +273,10 @@ int htc_connect_service(struct htc_target *target,
 	conn_msg->dl_pipeid = endpoint->dl_pipeid;
 	conn_msg->ul_pipeid = endpoint->ul_pipeid;
 
+	/* To prevent infoleak */
+	conn_msg->svc_meta_len = 0;
+	conn_msg->pad = 0;
+
 	ret = htc_issue_send(target, skb, skb->len, 0, ENDPOINT0);
 	if (ret)
 		goto err;
Signature · 1 line
2.34.1
author maintainer
#167 lore raw

PATCH 165/475 KVM: PPC: Fix vmx/vsx mixup in mmio emulation

In reply to Greg Kroah-Hartman

From: Fabiano Rosas <[email protected]>

[ Upstream commit b99234b918c6e36b9aa0a5b2981e86b6bd11f8e2 ]

The MMIO emulation code for vector instructions is duplicated between VSX and VMX. When emulating VMX we should check the VMX copy size instead of the VSX one.

Fixes acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...")
---
 arch/powerpc/kvm/powerpc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/kvm/powerpc.c +2 -2
index 8dd4d2b83677..eb8c72846b7f 100644
@@ -1495,7 +1495,7 @@ int kvmppc_handle_vmx_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
 {
 	enum emulation_result emulated = EMULATE_DONE;
 
-	if (vcpu->arch.mmio_vsx_copy_nums > 2)
+	if (vcpu->arch.mmio_vmx_copy_nums > 2)
 		return EMULATE_FAIL;
 
 	while (vcpu->arch.mmio_vmx_copy_nums) {
@@ -1592,7 +1592,7 @@ int kvmppc_handle_vmx_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	unsigned int index = rs & KVM_MMIO_REG_MASK;
 	enum emulation_result emulated = EMULATE_DONE;
 
-	if (vcpu->arch.mmio_vsx_copy_nums > 2)
+	if (vcpu->arch.mmio_vmx_copy_nums > 2)
 		return EMULATE_FAIL;
 
 	vcpu->arch.io_gpr = rs;
Signature · 1 line
2.34.1
author maintainer
#168 lore raw

PATCH 166/475 i40e: dont reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

In reply to Greg Kroah-Hartman

From: Alexander Lobakin <[email protected]>

[ Upstream commit bc97f9c6f988b31b728eb47a94ca825401dbeffe ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves additional xdp->data - xdp->data_hard_start, which is XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and don't reserve anything. This will give enough headroom for stack processing.

---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/net/ethernet/intel/i40e/i40e_xsk.c +1 -3
index a9ad788c4913..fd2da58c7140 100644
@@ -505,13 +505,11 @@ static struct sk_buff *i40e_construct_skb_zc(struct i40e_ring *rx_ring,
 	struct sk_buff *skb;
 
 	/* allocate a skb to store the frags */
-	skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
-			       xdp->data_end - xdp->data_hard_start,
+	skb = __napi_alloc_skb(&rx_ring->q_vector->napi, datasize,
 			       GFP_ATOMIC | __GFP_NOWARN);
 	if (unlikely(!skb))
 		return NULL;
 
-	skb_reserve(skb, xdp->data - xdp->data_hard_start);
 	memcpy(__skb_put(skb, datasize), xdp->data, datasize);
 	if (metasize)
 		skb_metadata_set(skb, metasize);
Signature · 1 line
2.34.1
author maintainer
#169 lore raw

PATCH 167/475 power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]

platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
---
 drivers/power/reset/gemini-poweroff.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/power/reset/gemini-poweroff.c +2 -2
index 90e35c07240a..b7f7a8225f22 100644
@@ -107,8 +107,8 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 		return PTR_ERR(gpw->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq)
-		return -EINVAL;
+	if (irq < 0)
+		return irq;
 
 	gpw->dev = dev;
 
Signature · 1 line
2.34.1
author maintainer
#170 lore raw

PATCH 168/475 ray_cs: Check ioremap return value

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 7e4760713391ee46dc913194b33ae234389a174e ]

As the possible failure of the ioremap(), the 'local->sram' and other two could be NULL.
Therefore it should be better to check it in order to avoid the later dev_dbg.

---
 drivers/net/wireless/ray_cs.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/wireless/ray_cs.c +6 -0
index cf372684b681..3836d6ac5304 100644
@@ -382,6 +382,8 @@ static int ray_config(struct pcmcia_device *link)
 		goto failed;
 	local->sram = ioremap(link->resource[2]->start,
 			resource_size(link->resource[2]));
+	if (!local->sram)
+		goto failed;
 
 /*** Set up 16k window for shared memory (receive buffer) ***************/
 	link->resource[3]->flags |=
@@ -396,6 +398,8 @@ static int ray_config(struct pcmcia_device *link)
 		goto failed;
 	local->rmem = ioremap(link->resource[3]->start,
 			resource_size(link->resource[3]));
+	if (!local->rmem)
+		goto failed;
 
 /*** Set up window for attribute memory ***********************************/
 	link->resource[4]->flags |=
@@ -410,6 +414,8 @@ static int ray_config(struct pcmcia_device *link)
 		goto failed;
 	local->amem = ioremap(link->resource[4]->start,
 			resource_size(link->resource[4]));
+	if (!local->amem)
+		goto failed;
 
 	dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
 	dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
Signature · 1 line
2.34.1
author maintainer
#171 lore raw

PATCH 169/475 powerpc/perf: Dont use perf_hw_context for trace IMC PMU

In reply to Greg Kroah-Hartman

From: Athira Rajeev <[email protected]>

[ Upstream commit 0198322379c25215b2778482bf1221743a76e2b5 ]

Trace IMC (In-Memory collection counters) in powerpc is useful for application level profiling.

For trace_imc, presently task context (task_ctx_nr) is set to perf_hw_context. But perf_hw_context should only be used for CPU PMU. See commit 26657848502b ("perf/core: Verify we have a single perf_hw_context PMU").

So for trace_imc, even though it is per thread PMU, it is preferred to use sw_context in order to be able to do application level monitoring. Hence change the task_ctx_nr to use perf_sw_context.

Fixes 012ae244845f ("powerpc/perf: Trace imc PMU functions")
[mpe: Update subject & incorporate notes into change log, reflow comment]
---
 arch/powerpc/perf/imc-pmu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
arch/powerpc/perf/imc-pmu.c +5 -1
index eb82dda884e5..d76e800a1f33 100644
@@ -1441,7 +1441,11 @@ static int trace_imc_event_init(struct perf_event *event)
 	event->hw.idx = -1;
 	target = event->hw.target;
 
-	event->pmu->task_ctx_nr = perf_hw_context;
+	/*
+	 * There can only be a single PMU for perf_hw_context events which is assigned to
+	 * core PMU. Hence use "perf_sw_context" for trace_imc.
+	 */
+	event->pmu->task_ctx_nr = perf_sw_context;
 	event->destroy = reset_global_refc;
 	return 0;
 }
Signature · 1 line
2.34.1
author maintainer
#172 lore raw

PATCH 170/475 mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit fc8e2c707ce11c8ec2e992885b0d53a5e04031ac ]

Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array.

Fixes c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688")
---
 drivers/net/wireless/mediatek/mt76/mt7603/main.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/mediatek/mt76/mt7603/main.c +3 -0
index 0a5695c3d924..625492284389 100644
@@ -605,6 +605,9 @@ mt7603_sta_rate_tbl_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct ieee80211_sta_rates *sta_rates = rcu_dereference(sta->rates);
 	int i;
 
+	if (!sta_rates)
+		return;
+
 	spin_lock_bh(&dev->mt76.lock);
 	for (i = 0; i < ARRAY_SIZE(msta->rates); i++) {
 		msta->rates[i].idx = sta_rates->rate[i].idx;
Signature · 1 line
2.34.1
author maintainer
#173 lore raw

PATCH 171/475 mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update

In reply to Greg Kroah-Hartman

From: Lorenzo Bianconi <[email protected]>

[ Upstream commit 6a6f457ed5fdf6777536c20644a9e42128a50ec2 ]

Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine since minstrel_ht_update_rates can fail allocating rates array.

Fixes 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
---
 drivers/net/wireless/mediatek/mt76/mt7615/main.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/wireless/mediatek/mt76/mt7615/main.c +3 -0
index 38183aef0eb9..5ad8b0afa41f 100644
@@ -385,6 +385,9 @@ static void mt7615_sta_rate_tbl_update(struct ieee80211_hw *hw,
 	struct ieee80211_sta_rates *sta_rates = rcu_dereference(sta->rates);
 	int i;
 
+	if (!sta_rates)
+		return;
+
 	spin_lock_bh(&dev->mt76.lock);
 	for (i = 0; i < ARRAY_SIZE(msta->rates); i++) {
 		msta->rates[i].idx = sta_rates->rate[i].idx;
Signature · 1 line
2.34.1
author maintainer
#174 lore raw

PATCH 172/475 net: dsa: mv88e6xxx: Enable port policy support on 6097

In reply to Greg Kroah-Hartman

From: Tobias Waldekranz <[email protected]>

[ Upstream commit 585d42bb57bb358d48906660a8de273b078810b1 ]

This chip has support for the same per-port policy actions found in later versions of LinkStreet devices.

Fixes f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
---
 drivers/net/dsa/mv88e6xxx/chip.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/dsa/mv88e6xxx/chip.c +1 -0
index 40b105daaf9e..87d28ef82559 100644
@@ -3062,6 +3062,7 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_speed = mv88e6185_port_set_speed,
 	.port_tag_remap = mv88e6095_port_tag_remap,
+	.port_set_policy = mv88e6352_port_set_policy,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
 	.port_set_ether_type = mv88e6351_port_set_ether_type,
Signature · 1 line
2.34.1
author maintainer
#175 lore raw

PATCH 173/475 PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge

In reply to Greg Kroah-Hartman

From: Pali Rohár <[email protected]>

[ Upstream commit 735f5ae49e1b44742cc63ca9b5c1ffde3e94ba91 ]

The emulated bridge returns incorrect value for PCI_EXP_RTSTA register during readout in advk_pci_bridge_emul_pcie_conf_read() function: the correct bit is BIT(16), but we are setting BIT(23), because the code does
*value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16
where
PCIE_MSG_PM_PME_MASK
is
BIT(7).

The code should probably have been something like
*value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16,
but we are better of using an if() and using the proper macro for this bit.

Fixes 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
---
 drivers/pci/controller/pci-aardvark.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pci/controller/pci-aardvark.c +3 -1
index d2f8cd3a9568..5958316651e4 100644
@@ -835,7 +835,9 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 	case PCI_EXP_RTSTA: {
 		u32 isr0 = advk_readl(pcie, PCIE_ISR0_REG);
 		u32 msglog = advk_readl(pcie, PCIE_MSG_LOG_REG);
-		*value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16 | (msglog >> 16);
+		*value = msglog >> 16;
+		if (isr0 & PCIE_MSG_PM_PME_MASK)
+			*value |= PCI_EXP_RTSTA_PME;
 		return PCI_BRIDGE_EMUL_HANDLED;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#176 lore raw

PATCH 174/475 power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 6a4760463dbc6b603690938c468839985189ce0a ]

kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add():

If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes 8c0984e5a753 ("power: move power supply drivers to power/supply")
---
 drivers/power/supply/ab8500_fg.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/power/supply/ab8500_fg.c +3 -1
index 69452fc085b9..4c229e6fb750 100644
@@ -2541,8 +2541,10 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
 	ret = kobject_init_and_add(&di->fg_kobject,
 		&ab8500_fg_ktype,
 		NULL, "battery");
-	if (ret < 0)
+	if (ret < 0) {
+		kobject_put(&di->fg_kobject);
 		dev_err(di->dev, "failed to create sysfs entry\n");
+	}
 
 	return ret;
 }
Signature · 1 line
2.34.1
author maintainer
#177 lore raw

PATCH 175/475 HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports

In reply to Greg Kroah-Hartman

From: Dmitry Torokhov <[email protected]>

[ Upstream commit a5e5e03e94764148a01757b2fa4737d3445c13a6 ]

Internally kernel prepends all report buffers, for both numbered and unnumbered reports, with report ID, therefore to properly handle unnumbered reports we should prepend it ourselves.

For the same reason we should skip the first byte of the buffer when calling i2c_hid_set_or_send_report() which then will take care of properly formatting the transfer buffer based on its separate report ID argument along with report payload.

[[email protected]: finalize trimmed sentence in changelog as spotted by Benjamin]
Fixes 9b5a9ae88573 ("HID: i2c-hid: implement ll_driver transport-layer callbacks")
---
 drivers/hid/i2c-hid/i2c-hid-core.c | 32 ++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)
drivers/hid/i2c-hid/i2c-hid-core.c +24 -8
index ac076ac73de5..1547b0ec6a11 100644
@@ -622,6 +622,17 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
 	if (report_type == HID_OUTPUT_REPORT)
 		return -EINVAL;
 
+	/*
+	 * In case of unnumbered reports the response from the device will
+	 * not have the report ID that the upper layers expect, so we need
+	 * to stash it the buffer ourselves and adjust the data size.
+	 */
+	if (!report_number) {
+		buf[0] = 0;
+		buf++;
+		count--;
+	}
+
 	/* +2 bytes to include the size of the reply in the query buffer */
 	ask_count = min(count + 2, (size_t)ihid->bufsize);
 
@@ -643,6 +654,9 @@ static int i2c_hid_get_raw_report(struct hid_device *hid,
 	count = min(count, ret_count - 2);
 	memcpy(buf, ihid->rawbuf + 2, count);
 
+	if (!report_number)
+		count++;
+
 	return count;
 }
 
@@ -659,17 +673,19 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 
 	mutex_lock(&ihid->reset_lock);
 
-	if (report_id) {
-		buf++;
-		count--;
-	}
-
+	/*
+	 * Note that both numbered and unnumbered reports passed here
+	 * are supposed to have report ID stored in the 1st byte of the
+	 * buffer, so we strip it off unconditionally before passing payload
+	 * to i2c_hid_set_or_send_report which takes care of encoding
+	 * everything properly.
+	 */
 	ret = i2c_hid_set_or_send_report(client,
 				report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
-				report_id, buf, count, use_data);
+				report_id, buf + 1, count - 1, use_data);
 
-	if (report_id && ret >= 0)
-		ret++; /* add report_id to the number of transfered bytes */
+	if (ret >= 0)
+		ret++; /* add report_id to the number of transferred bytes */
 
 	mutex_unlock(&ihid->reset_lock);
 
Signature · 1 line
2.34.1
author maintainer
#178 lore raw

PATCH 176/475 iommu/ipmmu-vmsa: Check for error num after setting mask

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 1fdbbfd5099f797a4dac05e7ef0192ba4a9c39b4 ]

Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails.

Fixes 1c894225bf5b ("iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master")
---
 drivers/iommu/ipmmu-vmsa.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iommu/ipmmu-vmsa.c +3 -1
index 2639fc718117..584eefab1dbc 100644
@@ -1061,7 +1061,9 @@ static int ipmmu_probe(struct platform_device *pdev)
 	bitmap_zero(mmu->ctx, IPMMU_CTX_MAX);
 	mmu->features = of_device_get_match_data(&pdev->dev);
 	memset(mmu->utlb_ctx, IPMMU_CTX_INVALID, mmu->features->num_utlbs);
-	dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(40));
+	if (ret)
+		return ret;
 
 	/* Map I/O memory and request IRQ. */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
Signature · 1 line
2.34.1
author maintainer
#179 lore raw

PATCH 177/475 drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug

In reply to Greg Kroah-Hartman

From: Roman Li <[email protected]>

[ Upstream commit 128f8ed5902a287a6bb4afe0ffdae8a80b2a64ec ]

[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors" However the original implementation may skip crtc if the topology change caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after unplug event on one of the connectors.

[How]
Update add_affected_mst_dsc_crtcs() to use old connector state if new connector state has no crtc (undergoes modeset due to unplug)

Fixes 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors")
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +5 -2
index 29f8b4bd5a76..c5231c50c412 100644
@@ -7268,10 +7268,13 @@ dm_determine_update_type_for_commit(struct amdgpu_display_manager *dm,
 static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm_crtc *crtc)
 {
 	struct drm_connector *connector;
-	struct drm_connector_state *conn_state;
+	struct drm_connector_state *conn_state, *old_conn_state;
 	struct amdgpu_dm_connector *aconnector = NULL;
 	int i;
-	for_each_new_connector_in_state(state, connector, conn_state, i) {
+	for_each_oldnew_connector_in_state(state, connector, old_conn_state, conn_state, i) {
+		if (!conn_state->crtc)
+			conn_state = old_conn_state;
+
 		if (conn_state->crtc != crtc)
 			continue;
 
Signature · 1 line
2.34.1
author maintainer
#180 lore raw

PATCH 178/475 IB/cma: Allow XRC INI QPs to set their local ACK timeout

In reply to Greg Kroah-Hartman

From: Håkon Bugge <[email protected]>

[ Upstream commit 748663c8ccf6b2e5a800de19127c2cc1c4423fd2 ]

XRC INI QPs should be able to adjust their local ACK timeout.

Fixes 2c1619edef61 ("IB/cma: Define option to set ack timeout and pack tos_set")
---
 drivers/infiniband/core/cma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/core/cma.c +1 -1
index 5e2b688e36fc..de7df5ab06f3 100644
@@ -2559,7 +2559,7 @@ int rdma_set_ack_timeout(struct rdma_cm_id *id, u8 timeout)
 {
 	struct rdma_id_private *id_priv;
 
-	if (id->qp_type != IB_QPT_RC)
+	if (id->qp_type != IB_QPT_RC && id->qp_type != IB_QPT_XRC_INI)
 		return -EINVAL;
 
 	id_priv = container_of(id, struct rdma_id_private, id);
Signature · 1 line
2.34.1
author maintainer
#181 lore raw

PATCH 179/475 dax: make sure inodes are flushed before destroy cache

In reply to Greg Kroah-Hartman

From: Tong Zhang <[email protected]>

[ Upstream commit a7e8de822e0b1979f08767c751f6c8a9c1d4ad86 ]

A bug can be triggered by following command

$ modprobe nd_pmem && modprobe -r nd_pmem
[   10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[   10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[   10.062433] Call Trace:
[   10.062673]  dump_stack_lvl+0x34/0x44
[   10.062865]  slab_err+0x90/0xd0
[   10.063619]  __kmem_cache_shutdown+0x13b/0x2f0
[   10.063848]  kmem_cache_destroy+0x4a/0x110
[   10.064058]  __x64_sys_delete_module+0x265/0x300

This is caused by dax_fs_exit() not flushing inodes before destroy cache. To fix this issue, call rcu_barrier() before destroy cache.

Fixes 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances")
---
 drivers/dax/super.c | 1 +
 1 file changed, 1 insertion(+)
drivers/dax/super.c +1 -0
index 8074e5de815b..5005b92b197d 100644
@@ -691,6 +691,7 @@ static int dax_fs_init(void)
 static void dax_fs_exit(void)
 {
 	kern_unmount(dax_mnt);
+	rcu_barrier();
 	kmem_cache_destroy(dax_cache);
 }
 
Signature · 1 line
2.34.1
author maintainer
#182 lore raw

PATCH 180/475 iwlwifi: Fix -EIO error code that is never returned

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit c305c94bdc18e45b5ad1db54da4269f8cbfdff6b ]

Currently the error -EIO is being assinged to variable ret when the READY_BIT is not set but the function iwlagn_mac_start returns 0 rather than ret. Fix this by returning ret instead of 0.

Addresses-Coverity: ("Unused value")

Fixes 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place")
---
 drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/dvm/mac80211.c +1 -1
index 6512d25e3563..f3bb1f91b587 100644
@@ -303,7 +303,7 @@ static int iwlagn_mac_start(struct ieee80211_hw *hw)
 
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
+	return ret;
 }
 
 static void iwlagn_mac_stop(struct ieee80211_hw *hw)
Signature · 1 line
2.34.1
author maintainer
#183 lore raw

PATCH 181/475 iwlwifi: mvm: Fix an error code in iwl_mvm_up()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ]

Return -ENODEV instead of success on this error path.

Fixes dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/fw.c +3 -1
index 7272d8522a9e..c5b08a68f6fa 100644
@@ -1417,8 +1417,10 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 	while (!sband && i < NUM_NL80211_BANDS)
 		sband = mvm->hw->wiphy->bands[i++];
 
-	if (WARN_ON_ONCE(!sband))
+	if (WARN_ON_ONCE(!sband)) {
+		ret = -ENODEV;
 		goto error;
+	}
 
 	chan = &sband->channels[0];
 
Signature · 1 line
2.34.1
author maintainer
#184 lore raw

PATCH 182/475 dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS

In reply to Greg Kroah-Hartman

From: Aashish Sharma <[email protected]>

[ Upstream commit 6fc51504388c1a1a53db8faafe9fff78fccc7c87 ]

Explicitly convert unsigned int in the right of the conditional expression to int to match the left side operand and the return type, fixing the following compiler warning:

drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned type in conditional expression [-Wsign-compare]

Fixes c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
---
 drivers/md/dm-crypt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/md/dm-crypt.c +1 -1
index 571c04e70343..3ed8ca47bc6e 100644
@@ -2010,7 +2010,7 @@ static int crypt_set_keyring_key(struct crypt_config *cc, const char *key_string
 
 static int get_key_size(char **key_string)
 {
-	return (*key_string[0] == ':') ? -EINVAL : strlen(*key_string) >> 1;
+	return (*key_string[0] == ':') ? -EINVAL : (int)(strlen(*key_string) >> 1);
 }
 
 #endif
Signature · 1 line
2.34.1
author maintainer
#185 lore raw

PATCH 183/475 scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 1a37b6738b58d86f6b144b3fc754ace0f2e0166d ]

Since the sata_cmd struct is zeroed out before its fields are initialized, there is no need for using "|=" to initialize the ncqtag_atap_dir_m field. Using a standard assignment removes the sparse warning:

warning: invalid assignment: |=

Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32() to generate the assigned value.

---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
 drivers/scsi/pm8001/pm80xx_hwi.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +1 -1
index 68a8217032d0..7dbf0289e350 100644
@@ -1828,7 +1828,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
 
 	sata_cmd.tag = cpu_to_le32(ccb_tag);
 	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m |= ((0x1 << 7) | (0x5 << 9));
+	sata_cmd.ncqtag_atap_dir_m = cpu_to_le32((0x1 << 7) | (0x5 << 9));
 	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
 
 	res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
drivers/scsi/pm8001/pm80xx_hwi.c +1 -1
index 161bf4760eac..5bf897188f4f 100644
@@ -1516,7 +1516,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
 
 	sata_cmd.tag = cpu_to_le32(ccb_tag);
 	sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
-	sata_cmd.ncqtag_atap_dir_m_dad |= ((0x1 << 7) | (0x5 << 9));
+	sata_cmd.ncqtag_atap_dir_m_dad = cpu_to_le32(((0x1 << 7) | (0x5 << 9)));
 	memcpy(&sata_cmd.sata_fis, &fis, sizeof(struct host_to_dev_fis));
 
 	res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd, 0);
Signature · 1 line
2.34.1
author maintainer
#186 lore raw

PATCH 184/475 scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit cd2268a180117aa8ebb23e090ba204324b2d0e93 ]

The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32. Assigning a value to it should thus use cpu_to_le32(). This fixes the sparse warning:

warning: incorrect type in assignment (different base types)
expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m got int

---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/pm8001/pm8001_hwi.c +1 -1
index 7dbf0289e350..a51fbb902366 100644
@@ -4727,7 +4727,7 @@ int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
 	memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
 	sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
 	if (pm8001_ha->chip_id != chip_8001)
-		sspTMCmd.ds_ads_m = 0x08;
+		sspTMCmd.ds_ads_m = cpu_to_le32(0x08);
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd, 0);
 	return ret;
Signature · 1 line
2.34.1
author maintainer
#187 lore raw

PATCH 185/475 scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit bb225b12dbcc82d53d637d10b8d70b64494f8c16 ]

The fields of the set_ctrl_cfg_req structure have the __le32 type, so use cpu_to_le32() to assign them. This removes the sparse warnings:

warning: incorrect type in assignment (different base types)
expected restricted __le32
got unsigned int

Fixes 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +5 -3
index 5bf897188f4f..564be9754859 100644
@@ -881,9 +881,11 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
 	else
 		page_code = THERMAL_PAGE_CODE_8H;
 
-	payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) |
-				(THERMAL_ENABLE << 8) | page_code;
-	payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
+	payload.cfg_pg[0] =
+		cpu_to_le32((THERMAL_LOG_ENABLE << 9) |
+			    (THERMAL_ENABLE << 8) | page_code);
+	payload.cfg_pg[1] =
+		cpu_to_le32((LTEMPHIL << 24) | (RTEMPHIL << 8));
 
 	rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
 	if (rc)
Signature · 1 line
2.34.1
author maintainer
#188 lore raw

PATCH 186/475 scsi: pm8001: Fix abort all task initialization

In reply to Greg Kroah-Hartman

From: Damien Le Moal <[email protected]>

[ Upstream commit 7f12845c8389855dbcc67baa068b6832dc4a396e ]

In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as:

[  197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[  197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[  197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[  197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[  197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[  197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[  197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[  197.741493] FS:  0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[  197.749659] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[  197.762656] Call Trace:
[  197.765127]  <IRQ>
[  197.767162]  pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[  197.772364]  ? do_raw_spin_unlock+0x54/0x220
[  197.776680]  pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[  197.782406]  process_oq+0xe85/0x7890 [pm80xx]
[  197.786817]  ? lock_acquire+0x194/0x490
[  197.790697]  ? handle_irq_event+0x10e/0x1b0
[  197.794920]  ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[  197.800378]  ? __wake_up_bit+0x100/0x100
[  197.804340]  ? lock_is_held_type+0x98/0x110
[  197.808565]  pm80xx_chip_isr+0x94/0x130 [pm80xx]
[  197.813243]  tasklet_action_common.constprop.0+0x24b/0x2f0
[  197.818785]  __do_softirq+0x1b5/0x82d
[  197.822485]  ? do_raw_spin_unlock+0x54/0x220
[  197.826799]  __irq_exit_rcu+0x17e/0x1e0
[  197.830678]  irq_exit_rcu+0xa/0x20
[  197.834114]  common_interrupt+0x78/0x90
[  197.840051]  </IRQ>
[  197.844236]  <TASK>
[  197.848397]  asm_common_interrupt+0x1e/0x40

Avoid this issue by always initializing the ccb n_elem field to 0 in pm8001_send_abort_all(), pm8001_send_read_log() and pm80xx_send_abort_all().

---
 drivers/scsi/pm8001/pm8001_hwi.c | 2 ++
 drivers/scsi/pm8001/pm80xx_hwi.c | 1 +
 2 files changed, 3 insertions(+)
drivers/scsi/pm8001/pm8001_hwi.c +2 -0
index a51fbb902366..fe5d996bf069 100644
@@ -1750,6 +1750,7 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
 	ccb->device = pm8001_ha_dev;
 	ccb->ccb_tag = ccb_tag;
 	ccb->task = task;
+	ccb->n_elem = 0;
 
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 
@@ -1812,6 +1813,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
 	ccb->device = pm8001_ha_dev;
 	ccb->ccb_tag = ccb_tag;
 	ccb->task = task;
+	ccb->n_elem = 0;
 	pm8001_ha_dev->id |= NCQ_READ_LOG_FLAG;
 	pm8001_ha_dev->id |= NCQ_2ND_RLE_FLAG;
 
drivers/scsi/pm8001/pm80xx_hwi.c +1 -0
index 564be9754859..ce67965a504f 100644
@@ -1437,6 +1437,7 @@ static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
 	ccb->device = pm8001_ha_dev;
 	ccb->ccb_tag = ccb_tag;
 	ccb->task = task;
+	ccb->n_elem = 0;
 
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 
Signature · 1 line
2.34.1
author maintainer
#189 lore raw

PATCH 187/475 drm/amd/display: Remove vupdate_int_entry definition

In reply to Greg Kroah-Hartman

From: Maíra Canal <[email protected]>

[ Upstream commit 3679b8518cd213c25d555553ef212e233faf698c ]

Remove the vupdate_int_entry definition and utilization to avoid the following warning by Clang:

drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2:
warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]

    vupdate_no_lock_int_entry(0),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2:
note: previous initialization is here
    vupdate_int_entry(0),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(1),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2:
note: previous initialization is here
    vupdate_int_entry(1),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(2),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2:
note: previous initialization is here
    vupdate_int_entry(2),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(3),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2:
note: previous initialization is here
    vupdate_int_entry(3),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(4),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2:
note: previous initialization is here
    vupdate_int_entry(4),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(5),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2:
note: previous initialization is here
    vupdate_int_entry(5),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
        [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
        ^~

6 warnings generated.

Fixes 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1")
---
 .../amd/display/dc/irq/dcn21/irq_service_dcn21.c   | 14 --------------
 1 file changed, 14 deletions(-)
drivers/gpu/drm/amd/display/dc/irq/dcn21/irq_service_dcn21.c +0 -14
index 623455cd7520..d6f988403941 100644
@@ -227,14 +227,6 @@ static const struct irq_source_info_funcs vupdate_no_lock_irq_info_funcs = {
 		.funcs = &pflip_irq_info_funcs\
 	}
 
-#define vupdate_int_entry(reg_num)\
-	[DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
-		IRQ_REG_ENTRY(OTG, reg_num,\
-			OTG_GLOBAL_SYNC_STATUS, VUPDATE_INT_EN,\
-			OTG_GLOBAL_SYNC_STATUS, VUPDATE_EVENT_CLEAR),\
-		.funcs = &vblank_irq_info_funcs\
-	}
-
 /* vupdate_no_lock_int_entry maps to DC_IRQ_SOURCE_VUPDATEx, to match semantic
  * of DCE's DC_IRQ_SOURCE_VUPDATEx.
  */
@@ -348,12 +340,6 @@ irq_source_info_dcn21[DAL_IRQ_SOURCES_NUMBER] = {
 	dc_underflow_int_entry(6),
 	[DC_IRQ_SOURCE_DMCU_SCP] = dummy_irq_entry(),
 	[DC_IRQ_SOURCE_VBIOS_SW] = dummy_irq_entry(),
-	vupdate_int_entry(0),
-	vupdate_int_entry(1),
-	vupdate_int_entry(2),
-	vupdate_int_entry(3),
-	vupdate_int_entry(4),
-	vupdate_int_entry(5),
 	vupdate_no_lock_int_entry(0),
 	vupdate_no_lock_int_entry(1),
 	vupdate_no_lock_int_entry(2),
Signature · 1 line
2.34.1
author maintainer
#190 lore raw

PATCH 188/475 TOMOYO: fix __setup handlers return values

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 39844b7e3084baecef52d1498b5fa81afa2cefa9 ]

__setup() handlers should return 1 if the parameter is handled. Returning 0 causes the entire string to be added to init's environment strings (limited to 32 strings), unnecessarily polluting it.

Using the documented strings "TOMOYO_loader=string1" and "TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.

and these strings are added to init's environment string space:
Run /sbin/init as init process

    with arguments:
     /sbin/init
    with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     TOMOYO_loader=string1
     TOMOYO_trigger=string2

With this change, these __setup handlers act as expected, and init's environment is not polluted with these strings.

Fixes 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Cc James Morris <[email protected]>
Cc Kentaro Takeda <[email protected]>
Cc "Serge E. Hallyn" <[email protected]>
---
 security/tomoyo/load_policy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
security/tomoyo/load_policy.c +2 -2
index 3445ae6fd479..363b65be87ab 100644
@@ -24,7 +24,7 @@ static const char *tomoyo_loader;
 static int __init tomoyo_loader_setup(char *str)
 {
 	tomoyo_loader = str;
-	return 0;
+	return 1;
 }
 
 __setup("TOMOYO_loader=", tomoyo_loader_setup);
@@ -64,7 +64,7 @@ static const char *tomoyo_trigger;
 static int __init tomoyo_trigger_setup(char *str)
 {
 	tomoyo_trigger = str;
-	return 0;
+	return 1;
 }
 
 __setup("TOMOYO_trigger=", tomoyo_trigger_setup);
Signature · 1 line
2.34.1
author maintainer
#191 lore raw

PATCH 189/475 ext2: correct max file size computing

In reply to Greg Kroah-Hartman

From: Zhang Yi <[email protected]>

[ Upstream commit 50b3a818991074177a56c87124c7a7bdf5fa4f67 ]

We need to calculate the max file size accurately if the total blocks that can address by block tree exceed the upper_limit. But this check is not correct now, it only compute the total data blocks but missing metadata blocks are needed. So in the case of "data blocks < upper_limit && total blocks > upper_limit", we will get wrong result. Fortunately, this case could not happen in reality, but it's confused and better to correct the computing.

bits data blocks metadatablocks upper_limit
10 16843020 66051 2147483647
11 134480396 263171 1073741823

  12      1074791436          1050627     536870911 (*)
  13      8594130956          4198403     268435455 (*)
  14     68736258060         16785411     134217727 (*)

15 549822930956 67125251 67108863 (*)
16 4398314962956 268468227 33554431 (*)

[*] Need to calculate in depth.

Fixes 1c2d14212b15 ("ext2: Fix underflow in ext2_max_size()")
---
 fs/ext2/super.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/ext2/super.c +5 -1
index 065cd2d1bdc6..db403c01d4d5 100644
@@ -770,8 +770,12 @@ static loff_t ext2_max_size(int bits)
 	res += 1LL << (bits-2);
 	res += 1LL << (2*(bits-2));
 	res += 1LL << (3*(bits-2));
+	/* Compute how many metadata blocks are needed */
+	meta_blocks = 1;
+	meta_blocks += 1 + ppb;
+	meta_blocks += 1 + ppb + ppb * ppb;
 	/* Does block tree limit file size? */
-	if (res < upper_limit)
+	if (res + meta_blocks <= upper_limit)
 		goto check_lfs;
 
 	res = upper_limit;
Signature · 1 line
2.34.1
author maintainer
#192 lore raw

PATCH 190/475 drm/tegra: Fix reference leak in tegra_dsi_ganged_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 221e3638feb8bc42143833c9a704fa89b6c366bb ]

The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add put_device() call to fix this.

Fixes e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
---
 drivers/gpu/drm/tegra/dsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/tegra/dsi.c +3 -1
index a5d47e301c5f..13413d2b2602 100644
@@ -1455,8 +1455,10 @@ static int tegra_dsi_ganged_probe(struct tegra_dsi *dsi)
 		dsi->slave = platform_get_drvdata(gangster);
 		of_node_put(np);
 
-		if (!dsi->slave)
+		if (!dsi->slave) {
+			put_device(&gangster->dev);
 			return -EPROBE_DEFER;
+		}
 
 		dsi->slave->master = dsi;
 	}
Signature · 1 line
2.34.1
author maintainer
#193 lore raw

PATCH 191/475 power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]

The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator) mode.

Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es uses 11 when enabling the regulator at boot.

Make bq24190_vbus_is_enabled() also check for 11 so that it does not wrongly returns false when the bits are set to 11.

Fixes 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc Bastien Nocera <[email protected]>
---
 drivers/power/supply/bq24190_charger.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/power/supply/bq24190_charger.c +6 -1
index 1ae5d6d42c9e..64d87dccea82 100644
@@ -41,6 +41,7 @@
 #define BQ24190_REG_POC_CHG_CONFIG_DISABLE		0x0
 #define BQ24190_REG_POC_CHG_CONFIG_CHARGE		0x1
 #define BQ24190_REG_POC_CHG_CONFIG_OTG			0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT		0x3
 #define BQ24190_REG_POC_SYS_MIN_MASK		(BIT(3) | BIT(2) | BIT(1))
 #define BQ24190_REG_POC_SYS_MIN_SHIFT		1
 #define BQ24190_REG_POC_SYS_MIN_MIN			3000
@@ -550,7 +551,11 @@ static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
 	pm_runtime_mark_last_busy(bdi->dev);
 	pm_runtime_put_autosuspend(bdi->dev);
 
-	return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+	if (ret)
+		return ret;
+
+	return (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+		val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
 }
 
 static const struct regulator_ops bq24190_vbus_ops = {
Signature · 1 line
2.34.1
author maintainer
#194 lore raw

PATCH 192/475 scsi: hisi_sas: Change permission of parameter prot_mask

In reply to Greg Kroah-Hartman

From: Xiang Chen <[email protected]>

[ Upstream commit c4e070457a93705e56ed06b3910d9e5fe56d3be3 ]

Currently the permission of parameter prot_mask is 0x0, which means that the member does not appear in sysfs. Change it as other module parameters to 0444 for world-readable.

[mkp: s/v3/v2/]

Fixes d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +1 -1
index 13f314fa757e..a86aae52d94f 100644
@@ -504,7 +504,7 @@ MODULE_PARM_DESC(intr_conv, "interrupt converge enable (0-1)");
 
 /* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
 static int prot_mask;
-module_param(prot_mask, int, 0);
+module_param(prot_mask, int, 0444);
 MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=0x0 ");
 
 static bool auto_affine_msi_experimental;
Signature · 1 line
2.34.1
author maintainer
#195 lore raw

PATCH 193/475 drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt

In reply to Greg Kroah-Hartman

From: Nishanth Menon <[email protected]>

[ Upstream commit ffb5c099aaa13ab7f73c29ea6ae26bce8d7575ae ]

Add MODULE_DEVICE_TABLE to the device tree table to create required aliases needed for module to be loaded with device tree based platform.

---
 drivers/gpu/drm/bridge/cdns-dsi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/bridge/cdns-dsi.c +1 -0
index 0cb9dd6986ec..9c3f9110895e 100644
@@ -1284,6 +1284,7 @@ static const struct of_device_id cdns_dsi_of_match[] = {
 	{ .compatible = "cdns,dsi" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, cdns_dsi_of_match);
 
 static struct platform_driver cdns_dsi_platform_driver = {
 	.probe  = cdns_dsi_drm_probe,
Signature · 1 line
2.34.1
author maintainer
#196 lore raw

PATCH 194/475 bpf, arm64: Call build_prologue() first in first JIT pass

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

[ Upstream commit 68e4f238b0e9d3670a1612ad900a6e98b2b3f7dd ]

BPF line info needs ctx->offset to be the instruction offset in the whole JITed image instead of the body itself, so also call build_prologue() first in first JIT pass.

Fixes 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
---
 arch/arm64/net/bpf_jit_comp.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
arch/arm64/net/bpf_jit_comp.c +8 -5
index a343677837c7..6332288dfb44 100644
@@ -909,15 +909,18 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		goto out_off;
 	}
 
-	/* 1. Initial fake pass to compute ctx->idx. */
-
-	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx, extra_pass)) {
+	/*
+	 * 1. Initial fake pass to compute ctx->idx and ctx->offset.
+	 *
+	 * BPF line info needs ctx->offset[i] to be the offset of
+	 * instruction[i] in jited image, so build prologue first.
+	 */
+	if (build_prologue(&ctx, was_classic)) {
 		prog = orig_prog;
 		goto out_off;
 	}
 
-	if (build_prologue(&ctx, was_classic)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
Signature · 1 line
2.34.1
author maintainer
#197 lore raw

PATCH 195/475 bpf, arm64: Feed byte-offset into bpf line info

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

[ Upstream commit dda7596c109fc382876118627e29db7607cde35d ]

insn_to_jit_off passed to bpf_prog_fill_jited_linfo() is calculated in instruction granularity instead of bytes granularity, but BPF line info requires byte offset.

bpf_prog_fill_jited_linfo() will be the last user of ctx.offset before it is freed, so convert the offset into byte-offset before calling into bpf_prog_fill_jited_linfo() in order to fix the line info dump on arm64.

Fixes 37ab566c178d ("bpf: arm64: Enable arm64 jit to provide bpf_line_info")
---
 arch/arm64/net/bpf_jit_comp.c | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm64/net/bpf_jit_comp.c +5 -0
index 6332288dfb44..17a8d1484f9b 100644
@@ -986,6 +986,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	prog->jited_len = image_size;
 
 	if (!prog->is_func || extra_pass) {
+		int i;
+
+		/* offset[prog->len] is the size of program */
+		for (i = 0; i <= prog->len; i++)
+			ctx.offset[i] *= AARCH64_INSN_SIZE;
 		bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
 out_off:
 		kfree(ctx.offset);
Signature · 1 line
2.34.1
author maintainer
#198 lore raw

PATCH 196/475 libbpf: Skip forward declaration when counting duplicated type names

In reply to Greg Kroah-Hartman

From: Xu Kuohai <[email protected]>

[ Upstream commit 4226961b0019b2e1612029e8950a9e911affc995 ]

Currently if a declaration appears in the BTF before the definition, the definition is dumped as a conflicting name, e.g.:

    $ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
    [81287] FWD 'unix_sock' fwd_kind=struct
    [89336] STRUCT 'unix_sock' size=1024 vlen=14
    $ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
    struct unix_sock;
    struct unix_sock___2 {	<--- conflict, the "___2" is unexpected
		    struct unix_sock___2 *unix_sk;

This causes a compilation error if the dump output is used as a header file.

Fix it by skipping declaration when counting duplicated type names.

Fixes 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
---
 tools/lib/bpf/btf_dump.c | 5 +++++
 1 file changed, 5 insertions(+)
tools/lib/bpf/btf_dump.c +5 -0
index b2fc45250450..a1176a9e8430 100644
@@ -1366,6 +1366,11 @@ static const char *btf_dump_resolve_name(struct btf_dump *d, __u32 id,
 	if (s->name_resolved)
 		return *cached_name ? *cached_name : orig_name;
 
+	if (btf_is_fwd(t) || (btf_is_enum(t) && btf_vlen(t) == 0)) {
+		s->name_resolved = 1;
+		return orig_name;
+	}
+
 	dup_cnt = btf_dump_name_dups(d, name_map, orig_name);
 	if (dup_cnt > 1) {
 		const size_t max_len = 256;
Signature · 1 line
2.34.1
author maintainer
#199 lore raw

PATCH 197/475 powerpc/Makefile: Dont pass -mcpu=powerpc64 when building 32-bit

In reply to Greg Kroah-Hartman

From: Michael Ellerman <[email protected]>

[ Upstream commit 2863dd2db23e0407f6c50b8ba5c0e55abef894f1 ]

When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass -mcpu=powerpc64 to the compiler, even when we're building a 32-bit kernel.

This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in the Makefile that was written before 32-bit supported GENERIC_CPU. Prior to that the else block only applied to 64-bit Book3E.

The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big endian PowerPC ... architecture machine [type], with an appropriate, generic processor model assumed for scheduling purposes."

It's unclear how that interacts with -m32, which we are also passing, although obviously -m32 is taking precedence in some sense, as the 32-bit kernel only contains 32-bit instructions.

This was noticed by inspection, not via any bug reports, but it does affect code generation. Comparing before/after code generation, there are some changes to instruction scheduling, and the after case (with -mcpu=powerpc64 removed) the compiler seems more keen to use r8.

Fix it by making the else case only apply to Book3E 64, which excludes 32-bit.

Fixes 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32")
---
 arch/powerpc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/Makefile +1 -1
index 9f73fb6b1cc9..b9d2fcf030d0 100644
@@ -174,7 +174,7 @@ else
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,$(call cc-option,-mtune=power5))
 CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mcpu=power5,-mcpu=power4)
 endif
-else
+else ifdef CONFIG_PPC_BOOK3E_64
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
 endif
 
Signature · 1 line
2.34.1
author maintainer
#200 lore raw

PATCH 198/475 KVM: x86: Fix emulation in writing cr8

In reply to Greg Kroah-Hartman

From: Zhenzhong Duan <[email protected]>

[ Upstream commit f66af9f222f08d5b11ea41c1bd6c07a0f12daa07 ]

In emulation of writing to cr8, one of the lowest four bits in TPR[3:0] is kept.

According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";

and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are cleared.";

and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the current sub-priority to be used when arbitrating lowest-priority messages. This field is written with zero when TPR is written using the architectural CR8 register.";

so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior as in other scenarios.

This doesn't impact evaluation and delivery of pending virtual interrupts because processor does not use the processor-priority sub-class to determine which interrupts to delivery and which to inhibit.

Sub-class is used by hardware to arbitrate lowest priority interrupts, but KVM just does a round-robin style delivery.

Fixes b93463aa59d6 ("KVM: Accelerated apic support")

Message-Id: <[email protected]>

---
 arch/x86/kvm/lapic.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
arch/x86/kvm/lapic.c +1 -4
index eea2d6f10f59..afe3b8e61514 100644
@@ -2099,10 +2099,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
 
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
 {
-	struct kvm_lapic *apic = vcpu->arch.apic;
-
-	apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
-		     | (kvm_lapic_get_reg(apic, APIC_TASKPRI) & 4));
+	apic_set_tpr(vcpu->arch.apic, (cr8 & 0x0f) << 4);
 }
 
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
Signature · 1 line
2.34.1
author maintainer
#201 lore raw

PATCH 199/475 KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()

In reply to Greg Kroah-Hartman

From: Hou Wenlong <[email protected]>

[ Upstream commit ca85f002258fdac3762c57d12d5e6e401b6a41af ]

Per Intel's SDM on the "Instruction Set Reference", when loading segment descriptor, not-present segment check should be after all type and privilege checks. But the emulator checks it first, then #NP is triggered instead of #GP if privilege fails and segment is not present. Put not-present segment check after type and privilege checks in __load_segment_descriptor().

Fixes 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c)

Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>

---
 arch/x86/kvm/emulate.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
arch/x86/kvm/emulate.c +9 -5
index 60c8dcb907a5..ea48a2fb1677 100644
@@ -1714,11 +1714,6 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 		goto exception;
 	}
 
-	if (!seg_desc.p) {
-		err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
-		goto exception;
-	}
-
 	dpl = seg_desc.dpl;
 
 	switch (seg) {
@@ -1758,6 +1753,10 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 	case VCPU_SREG_TR:
 		if (seg_desc.s || (seg_desc.type != 1 && seg_desc.type != 9))
 			goto exception;
+		if (!seg_desc.p) {
+			err_vec = NP_VECTOR;
+			goto exception;
+		}
 		old_desc = seg_desc;
 		seg_desc.type |= 2; /* busy */
 		ret = ctxt->ops->cmpxchg_emulated(ctxt, desc_addr, &old_desc, &seg_desc,
@@ -1782,6 +1781,11 @@ static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
 		break;
 	}
 
+	if (!seg_desc.p) {
+		err_vec = (seg == VCPU_SREG_SS) ? SS_VECTOR : NP_VECTOR;
+		goto exception;
+	}
+
 	if (seg_desc.s) {
 		/* mark segment as accessed */
 		if (!(seg_desc.type & 1)) {
Signature · 1 line
2.34.1
author maintainer
#202 lore raw

PATCH 200/475 hv_balloon: rate-limit "Unhandled message" warning

In reply to Greg Kroah-Hartman

From: Anssi Hannula <[email protected]>

[ Upstream commit 1d7286729aa616772be334eb908e11f527e1e291 ]

For a couple of times I have encountered a situation where

hv_balloon: Unhandled message: type: 12447

is being flooded over 1 million times per second with various values, filling the log and consuming cycles, making debugging difficult.

Add rate limiting to the message.

Most other Hyper-V drivers already have similar rate limiting in their message callbacks.

The cause of the floods in my case was probably fixed by 96d9d1fa5cd5 ("Drivers: hv: balloon: account for vmbus packet header in max_pkt_size").

Fixes 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver")
---
 drivers/hv/hv_balloon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hv/hv_balloon.c +1 -1
index bd4e72f6dfd4..44d6de6fc03d 100644
@@ -1550,7 +1550,7 @@ static void balloon_onchannelcallback(void *context)
 			break;
 
 		default:
-			pr_warn("Unhandled message: type: %d\n", dm_hdr->type);
+			pr_warn_ratelimited("Unhandled message: type: %d\n", dm_hdr->type);
 
 		}
 	}
Signature · 1 line
2.34.1
author maintainer
#203 lore raw

PATCH 201/475 i2c: xiic: Make bus names unique

In reply to Greg Kroah-Hartman

From: Robert Hancock <[email protected]>

[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ]

This driver is for an FPGA logic core, so there can be arbitrarily many instances of the bus on a given system. Previously all of the I2C bus names were "xiic-i2c" which caused issues with lm_sensors when trying to map human-readable names to sensor inputs because it could not properly distinguish the busses, for example. Append the platform device name to the I2C bus name so it is unique between different instances.

Fixes e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
---
 drivers/i2c/busses/i2c-xiic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-xiic.c +2 -1
index 37b3b9307d07..a48bee59dcde 100644
@@ -715,7 +715,6 @@ static const struct i2c_adapter_quirks xiic_quirks = {
 
 static const struct i2c_adapter xiic_adapter = {
 	.owner = THIS_MODULE,
-	.name = DRIVER_NAME,
 	.class = I2C_CLASS_DEPRECATED,
 	.algo = &xiic_algorithm,
 	.quirks = &xiic_quirks,
@@ -752,6 +751,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 DRIVER_NAME " %s", pdev->name);
 
 	mutex_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
Signature · 1 line
2.34.1
author maintainer
#204 lore raw

PATCH 202/475 power: supply: wm8350-power: Handle error for wm8350_register_irq

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit b0b14b5ba11bec56fad344a4a0b2e16449cc8b94 ]

As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, use 'free_' in order to avoid same code.

Fixes 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
---
 drivers/power/supply/wm8350_power.c | 96 ++++++++++++++++++++++++-----
 1 file changed, 82 insertions(+), 14 deletions(-)
drivers/power/supply/wm8350_power.c +82 -14
index 26923af574f4..0762ab13fa56 100644
@@ -408,44 +408,112 @@ static const struct power_supply_desc wm8350_usb_desc = {
  *		Initialisation
  *********************************************************************/
 
-static void wm8350_init_charger(struct wm8350 *wm8350)
+static int wm8350_init_charger(struct wm8350 *wm8350)
 {
+	int ret;
+
 	/* register our interest in charger events */
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
 			    wm8350_charger_handler, 0, "Battery hot", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
+	if (ret)
+		goto err;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
 			    wm8350_charger_handler, 0, "Battery cold", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
+	if (ret)
+		goto free_chg_bat_hot;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
 			    wm8350_charger_handler, 0, "Battery fail", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
+	if (ret)
+		goto free_chg_bat_cold;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
 			    wm8350_charger_handler, 0,
 			    "Charger timeout", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
+	if (ret)
+		goto free_chg_bat_fail;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
 			    wm8350_charger_handler, 0,
 			    "Charge end", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
+	if (ret)
+		goto free_chg_to;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
 			    wm8350_charger_handler, 0,
 			    "Charge start", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
+	if (ret)
+		goto free_chg_end;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
 			    wm8350_charger_handler, 0,
 			    "Fast charge ready", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
+	if (ret)
+		goto free_chg_start;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
 			    wm8350_charger_handler, 0,
 			    "Battery <3.9V", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
+	if (ret)
+		goto free_chg_fast_rdy;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
 			    wm8350_charger_handler, 0,
 			    "Battery <3.1V", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
+	if (ret)
+		goto free_chg_vbatt_lt_3p9;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
 			    wm8350_charger_handler, 0,
 			    "Battery <2.85V", wm8350);
+	if (ret)
+		goto free_chg_vbatt_lt_3p1;
 
 	/* and supply change events */
-	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
 			    wm8350_charger_handler, 0, "USB", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
+	if (ret)
+		goto free_chg_vbatt_lt_2p85;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
 			    wm8350_charger_handler, 0, "Wall", wm8350);
-	wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
+	if (ret)
+		goto free_ext_usb_fb;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
 			    wm8350_charger_handler, 0, "Battery", wm8350);
+	if (ret)
+		goto free_ext_wall_fb;
+
+	return 0;
+
+free_ext_wall_fb:
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+free_ext_usb_fb:
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+free_chg_vbatt_lt_2p85:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+free_chg_vbatt_lt_3p1:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+free_chg_vbatt_lt_3p9:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+free_chg_fast_rdy:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+free_chg_start:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+free_chg_end:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+free_chg_to:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+free_chg_bat_fail:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+free_chg_bat_cold:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+free_chg_bat_hot:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+err:
+	return ret;
 }
 
 static void free_charger_irq(struct wm8350 *wm8350)
Signature · 1 line
2.34.1
author maintainer
#205 lore raw

PATCH 203/475 power: supply: wm8350-power: Add missing free in free_charger_irq

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 6dee930f6f6776d1e5a7edf542c6863b47d9f078 ]

In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'. Therefore, it should be better to add it in order to avoid the memory leak.

Fixes 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
---
 drivers/power/supply/wm8350_power.c | 1 +
 1 file changed, 1 insertion(+)
drivers/power/supply/wm8350_power.c +1 -0
index 0762ab13fa56..4fe9ea9721b3 100644
@@ -524,6 +524,7 @@ static void free_charger_irq(struct wm8350 *wm8350)
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
 	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
Signature · 1 line
2.34.1
author maintainer
#206 lore raw

PATCH 204/475 PCI: Reduce warnings on possible RW1C corruption

In reply to Greg Kroah-Hartman

From: Mark Tomlinson <[email protected]>

[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ]

For hardware that only supports 32-bit writes to PCI there is the possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited messages was introduced by fb2659230120, but rate-limiting is not the best choice here. Some devices may not show the warnings they should if another device has just produced a bunch of warnings. Also, the number of messages can be a nuisance on devices which are otherwise working fine.

Change the ratelimit to a single warning per bus. This ensures no bus is 'starved' of emitting a warning and also that there isn't a continuous stream of warnings. It would be preferable to have a warning per device, but the pci_dev structure is not available here, and a lookup from devfn would be far too slow.

---
 drivers/pci/access.c | 9 ++++++---
 include/linux/pci.h  | 1 +
 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/pci/access.c +6 -3
index 0914ddeae17f..c909c66a63e2 100644
@@ -160,9 +160,12 @@ int pci_generic_config_write32(struct pci_bus *bus, unsigned int devfn,
 	 * write happen to have any RW1C (write-one-to-clear) bits set, we
 	 * just inadvertently cleared something we shouldn't have.
 	 */
-	dev_warn_ratelimited(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
-			     size, pci_domain_nr(bus), bus->number,
-			     PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+	if (!bus->unsafe_warn) {
+		dev_warn(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
+			 size, pci_domain_nr(bus), bus->number,
+			 PCI_SLOT(devfn), PCI_FUNC(devfn), where);
+		bus->unsafe_warn = 1;
+	}
 
 	mask = ~(((1 << (size * 8)) - 1) << ((where & 0x3) * 8));
 	tmp = readl(addr) & mask;
include/linux/pci.h +1 -0
index bc35b15efadd..fc343d123127 100644
@@ -604,6 +604,7 @@ struct pci_bus {
 	struct bin_attribute	*legacy_io;	/* Legacy I/O for this bus */
 	struct bin_attribute	*legacy_mem;	/* Legacy mem */
 	unsigned int		is_added:1;
+	unsigned int		unsafe_warn:1;	/* warned about RW1C config write */
 };
 
 #define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
Signature · 1 line
2.34.1
author maintainer
#207 lore raw

PATCH 205/475 mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 97bf0395c226907e1a9b908511a35192bf1e09bb ]

Include the DECstation interrupt handler in opting out of FPU support.

Fixes a linker error:

mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'

Fixes 183b40f992c8 ("MIPS: Allow FP support to be disabled")
Cc Paul Burton <[email protected]>
Cc Thomas Bogendoerfer <[email protected]>
Cc Maciej W. Rozycki <[email protected]>
---
 arch/mips/dec/int-handler.S | 6 +++---
 arch/mips/dec/setup.c       | 3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)
arch/mips/dec/int-handler.S +3 -3
index a25ef822e725..5ed38e618019 100644
@@ -131,7 +131,7 @@
 		 */
 		mfc0	t0,CP0_CAUSE		# get pending interrupts
 		mfc0	t1,CP0_STATUS
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 		lw	t2,cpu_fpu_mask
 #endif
 		andi	t0,ST0_IM		# CAUSE.CE may be non-zero!
@@ -139,7 +139,7 @@
 
 		beqz	t0,spurious
 
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 		 and	t2,t0
 		bnez	t2,fpu			# handle FPU immediately
 #endif
@@ -280,7 +280,7 @@ handle_it:
 		j	dec_irq_dispatch
 		 nop
 
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 fpu:
 		lw	t0,fpu_kstat_irq
 		nop
arch/mips/dec/setup.c +2 -1
index 1fc8dffa8d1d..649b50ae5b1e 100644
@@ -766,7 +766,8 @@ void __init arch_init_irq(void)
 		dec_interrupt[DEC_IRQ_HALT] = -1;
 
 	/* Register board interrupts: FPU and cascade. */
-	if (dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT) &&
+	    dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
 		struct irq_desc *desc_fpu;
 		int irq_fpu;
 
Signature · 1 line
2.34.1
author maintainer
#208 lore raw

PATCH 206/475 powerpc/sysdev: fix incorrect use to determine if list is empty

In reply to Greg Kroah-Hartman

From: Jakob Koschel <[email protected]>

[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ]

'gtm' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the list is empty.

Instead of checking the pointer it should be checked if the list is empty.

Fixes 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support")
---
 arch/powerpc/sysdev/fsl_gtm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/powerpc/sysdev/fsl_gtm.c +2 -2
index 8963eaffb1b7..39186ad6b3c3 100644
@@ -86,7 +86,7 @@ static LIST_HEAD(gtms);
  */
 struct gtm_timer *gtm_get_timer16(void)
 {
-	struct gtm *gtm = NULL;
+	struct gtm *gtm;
 	int i;
 
 	list_for_each_entry(gtm, &gtms, list_node) {
@@ -103,7 +103,7 @@ struct gtm_timer *gtm_get_timer16(void)
 		spin_unlock_irq(&gtm->lock);
 	}
 
-	if (gtm)
+	if (!list_empty(&gtms))
 		return ERR_PTR(-EBUSY);
 	return ERR_PTR(-ENODEV);
 }
Signature · 1 line
2.34.1
author maintainer
#209 lore raw

PATCH 207/475 mfd: mc13xxx: Add check for mc13xxx_irq_request

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit e477e51a41cb5d6034f3c5ea85a71ad4613996b9 ]

As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value of the mc13xxx_irq_request() and return error if fails.

Fixes 8e00593557c3 ("mfd: Add mc13892 support to mc13xxx")
---
 drivers/mfd/mc13xxx-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mfd/mc13xxx-core.c +3 -1
index 1abe7432aad8..e281a9202f11 100644
@@ -323,8 +323,10 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 		adc1 |= MC13783_ADC1_ATOX;
 
 	dev_dbg(mc13xxx->dev, "%s: request irq\n", __func__);
-	mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+	ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
 			mc13xxx_handler_adcdone, __func__, &adcdone_data);
+	if (ret)
+		goto out;
 
 	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
 	mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
Signature · 1 line
2.34.1
author maintainer
#210 lore raw

PATCH 208/475 selftests/bpf: Make test_lwt_ip_encap more stable and faster

In reply to Greg Kroah-Hartman

From: Felix Maurer <[email protected]>

[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ]

In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to time. The failure occured when an IPv4 ping through the IPv6 GRE encapsulation did not receive a reply within the timeout. The IPv4 ping and the IPv6 ping in the test used different timeouts (1 sec for IPv4 and 6 sec for IPv6), probably taking into account that IPv6 might need longer to successfully complete. However, when IPv4 pings (with the short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6 apply.

The actual reason for the long delays with IPv6 was that the IPv6 neighbor discovery sometimes did not complete in time. This was caused by the outgoing interface only having a tentative link local address, i.e., not having completed DAD for that lladdr. The ND was successfully retried after 1 sec but that was too late for the ping timeout.

The IPv6 addresses for the test were already added with nodad. However, for the lladdrs, DAD was still performed. We now disable DAD in the test netns completely and just assume that the two lladdrs on each veth pair do not collide. This removes all the delays for IPv6 traffic in the test.

Without the delays, we can now also reduce the delay of the IPv6 ping to 1 sec. This makes the whole test complete faster because we don't need to wait for the excessive timeout for each IPv6 ping that is supposed to fail.

---
 tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
tools/testing/selftests/bpf/test_lwt_ip_encap.sh +9 -1
index b497bb85b667..6c69c42b1d60 100755
@@ -120,6 +120,14 @@ setup()
 	ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0
 	ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0
 
+	# disable IPv6 DAD because it sometimes takes too long and fails tests
+	ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0
+	ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0
+	ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
 	ip link add veth1 type veth peer name veth2
 	ip link add veth3 type veth peer name veth4
 	ip link add veth5 type veth peer name veth6
@@ -289,7 +297,7 @@ test_ping()
 		ip netns exec ${NS1} ping  -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null
 		RET=$?
 	elif [ "${PROTO}" == "IPv6" ] ; then
-		ip netns exec ${NS1} ping6 -c 1 -W 6 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
+		ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null
 		RET=$?
 	else
 		echo "    test_ping: unknown PROTO: ${PROTO}"
Signature · 1 line
2.34.1
author maintainer
#211 lore raw

PATCH 209/475 powerpc: 8xx: fix a return value error in mpc8xx_pic_init

In reply to Greg Kroah-Hartman

From: Hangyu Hua <[email protected]>

[ Upstream commit 3fd46e551f67f4303c3276a0d6cd20baf2d192c4 ]

mpc8xx_pic_init() should return -ENOMEM instead of 0 when irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue executing even if mpc8xx_pic_host is NULL.

Fixes cc76404feaed ("powerpc/8xx: Fix possible device node reference leak")
---
 arch/powerpc/platforms/8xx/pic.c | 1 +
 1 file changed, 1 insertion(+)
arch/powerpc/platforms/8xx/pic.c +1 -0
index e9617d35fd1f..209b12323aa4 100644
@@ -153,6 +153,7 @@ int mpc8xx_pic_init(void)
 	if (mpc8xx_pic_host == NULL) {
 		printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
 		ret = -ENOMEM;
+		goto out;
 	}
 
 	ret = 0;
Signature · 1 line
2.34.1
author maintainer
#212 lore raw

PATCH 210/475 vxcan: enable local echo for sent CAN frames

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

[ Upstream commit 259bdba27e32368b4404f69d613b1c1014c07cbf ]

The vxcan driver provides a pair of virtual CAN interfaces to exchange CAN traffic between different namespaces - analogue to veth.

In opposite to the vcan driver the local sent CAN traffic on this interface is not echo'ed back but only sent to the remote peer. This is unusual and can be easily fixed by removing IFF_ECHO from the netdevice flags that are set for vxcan interfaces by default at startup.

Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed in af_can.c in can_send(). This patch makes vxcan interfaces adopt the same local echo behavior and procedures as known from the vcan interfaces.

Fixes a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
---
 drivers/net/can/vxcan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/can/vxcan.c +1 -1
index 7000c6cd1e48..282c53ef76d2 100644
@@ -148,7 +148,7 @@ static void vxcan_setup(struct net_device *dev)
 	dev->hard_header_len	= 0;
 	dev->addr_len		= 0;
 	dev->tx_queue_len	= 0;
-	dev->flags		= (IFF_NOARP|IFF_ECHO);
+	dev->flags		= IFF_NOARP;
 	dev->netdev_ops		= &vxcan_netdev_ops;
 	dev->needs_free_netdev	= true;
 
Signature · 1 line
2.34.1
author maintainer
#213 lore raw

PATCH 211/475 MIPS: RB532: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 8755d57ba1ff910666572fab9e32890e8cc6ed3b ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from setup_kmac().

Fixes 9e21c7e40b7e ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")

From: Igor Zhbanov <[email protected]>

Link lore.kernel.org/r/[email protected]
Cc Thomas Bogendoerfer <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Jakub Kicinski <[email protected]>
Cc Phil Sutter <[email protected]>
Cc Florian Fainelli <[email protected]>
Cc Ralf Baechle <[email protected]>
Cc Daniel Walter <[email protected]>
---
 arch/mips/rb532/devices.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
arch/mips/rb532/devices.c +2 -4
index c9ecf17f8660..74808619fefe 100644
@@ -310,11 +310,9 @@ static int __init plat_setup_devices(void)
 static int __init setup_kmac(char *s)
 {
 	printk(KERN_INFO "korina mac = %s\n", s);
-	if (!mac_pton(s, korina_dev0_data.mac)) {
+	if (!mac_pton(s, korina_dev0_data.mac))
 		printk(KERN_ERR "Invalid mac\n");
-		return -EINVAL;
-	}
-	return 0;
+	return 1;
 }
 
 __setup("kmac=", setup_kmac);
Signature · 1 line
2.34.1
author maintainer
#214 lore raw

PATCH 212/475 mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init

In reply to Greg Kroah-Hartman

From: Xin Xiong <[email protected]>

[ Upstream commit fecbd4a317c95d73c849648c406bcf1b6a0ec1cf ]

The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks.

Fix it by decrementing the refcount of specific object in those error paths.

---
 drivers/mtd/nand/raw/atmel/nand-controller.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/mtd/nand/raw/atmel/nand-controller.c +11 -3
index 23d11e8b5644..17c751f359d3 100644
@@ -2004,13 +2004,15 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
 	nc->mck = of_clk_get(dev->parent->of_node, 0);
 	if (IS_ERR(nc->mck)) {
 		dev_err(dev, "Failed to retrieve MCK clk\n");
-		return PTR_ERR(nc->mck);
+		ret = PTR_ERR(nc->mck);
+		goto out_release_dma;
 	}
 
 	np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0);
 	if (!np) {
 		dev_err(dev, "Missing or invalid atmel,smc property\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_release_dma;
 	}
 
 	nc->smc = syscon_node_to_regmap(np);
@@ -2018,10 +2020,16 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
 	if (IS_ERR(nc->smc)) {
 		ret = PTR_ERR(nc->smc);
 		dev_err(dev, "Could not get SMC regmap (err = %d)\n", ret);
-		return ret;
+		goto out_release_dma;
 	}
 
 	return 0;
+
+out_release_dma:
+	if (nc->dmac)
+		dma_release_channel(nc->dmac);
+
+	return ret;
 }
 
 static int
Signature · 1 line
2.34.1
author maintainer
#215 lore raw

PATCH 213/475 RDMA/mlx5: Fix memory leak in error flow for subscribe event routine

In reply to Greg Kroah-Hartman

From: Yongzhi Liu <[email protected]>

[ Upstream commit 087f9c3f2309ed183f7e4b85ae57121d8663224d ]

In case the second xa_insert() fails, the obj_event is not released. Fix the error unwind flow to free that memory to avoid a memory leak.

Fixes 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX")
---
 drivers/infiniband/hw/mlx5/devx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/devx.c +3 -1
index 664e0f374ac0..747f42855b7b 100644
@@ -1844,8 +1844,10 @@ subscribe_event_xa_alloc(struct mlx5_devx_event_table *devx_event_table,
 				key_level2,
 				obj_event,
 				GFP_KERNEL);
-		if (err)
+		if (err) {
+			kfree(obj_event);
 			return err;
+		}
 		INIT_LIST_HEAD(&obj_event->obj_sub_list);
 	}
 
Signature · 1 line
2.34.1
author maintainer
#216 lore raw

PATCH 214/475 bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 9c34e38c4a870eb30b13f42f5b44f42e9d19ccb8 ]

If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory.

Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested.

This issue can cause the following info:

WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 kthread+0xe6/0x110
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/core/skmsg.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
net/core/skmsg.c +13 -4
index 17cc1edd149c..a606ad8e8be2 100644
@@ -27,6 +27,7 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
 		 int elem_first_coalesce)
 {
 	struct page_frag *pfrag = sk_page_frag(sk);
+	u32 osize = msg->sg.size;
 	int ret = 0;
 
 	len -= msg->sg.size;
@@ -35,13 +36,17 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
 		u32 orig_offset;
 		int use, i;
 
-		if (!sk_page_frag_refill(sk, pfrag))
-			return -ENOMEM;
+		if (!sk_page_frag_refill(sk, pfrag)) {
+			ret = -ENOMEM;
+			goto msg_trim;
+		}
 
 		orig_offset = pfrag->offset;
 		use = min_t(int, len, pfrag->size - orig_offset);
-		if (!sk_wmem_schedule(sk, use))
-			return -ENOMEM;
+		if (!sk_wmem_schedule(sk, use)) {
+			ret = -ENOMEM;
+			goto msg_trim;
+		}
 
 		i = msg->sg.end;
 		sk_msg_iter_var_prev(i);
@@ -71,6 +76,10 @@ int sk_msg_alloc(struct sock *sk, struct sk_msg *msg, int len,
 	}
 
 	return ret;
+
+msg_trim:
+	sk_msg_trim(sk, msg, osize);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(sk_msg_alloc);
 
Signature · 1 line
2.34.1
author maintainer
#217 lore raw

PATCH 215/475 bpf, sockmap: Fix more uncharged while msg has more_data

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 84472b436e760ba439e1969a9e3c5ae7c86de39d ]

In tcp_bpf_send_verdict(), if msg has more data after tcp_bpf_sendmsg_redir():

tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc

The msg->sg.size(11000) has been uncharged twice, to fix we can charge the remaining msg->sg.size before goto more data.

This issue can cause the following info:

WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x55/0x110
 __tcp_close+0x279/0x470
 tcp_close+0x1f/0x60
 inet_release+0x3f/0x80
 __sock_release+0x3d/0xb0
 sock_close+0x11/0x20
 __fput+0x92/0x250
 task_work_run+0x6a/0xa0
 do_exit+0x33b/0xb60
 do_group_exit+0x2f/0xa0
 get_signal+0xb6/0x950
 arch_do_signal_or_restart+0xac/0x2a0
 ? vfs_write+0x237/0x290
 exit_to_user_mode_prepare+0xa9/0x200
 syscall_exit_to_user_mode+0x12/0x30
 do_syscall_64+0x46/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>

WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/ipv4/tcp_bpf.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/ipv4/tcp_bpf.c +5 -2
index 7df7ec74807a..1584863bbdc1 100644
@@ -367,7 +367,7 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
 			cork = true;
 			psock->cork = NULL;
 		}
-		sk_msg_return(sk, msg, tosend);
+		sk_msg_return(sk, msg, msg->sg.size);
 		release_sock(sk);
 
 		ret = tcp_bpf_sendmsg_redir(sk_redir, msg, tosend, flags);
@@ -407,8 +407,11 @@ static int tcp_bpf_send_verdict(struct sock *sk, struct sk_psock *psock,
 		}
 		if (msg &&
 		    msg->sg.data[msg->sg.start].page_link &&
-		    msg->sg.data[msg->sg.start].length)
+		    msg->sg.data[msg->sg.start].length) {
+			if (eval == __SK_REDIRECT)
+				sk_mem_charge(sk, msg->sg.size);
 			goto more_data;
+		}
 	}
 	return ret;
 }
Signature · 1 line
2.34.1
author maintainer
#218 lore raw

PATCH 216/475 bpf, sockmap: Fix double uncharge the mem of sk_msg

In reply to Greg Kroah-Hartman

From: Wang Yufen <[email protected]>

[ Upstream commit 2486ab434b2c2a14e9237296db00b1e1b7ae3273 ]

If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed.

tcp_bpf_sendmsg()
tcp_bpf_send_verdict()
sk_msg_return()
tcp_bpf_sendmsg_redir()
unlikely(!psock))

     sk_msg_free()

The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error.

This issue can cause the following info:

WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
 <TASK>
 __sk_destruct+0x24/0x1f0
 sk_psock_destroy+0x19b/0x1c0
 process_one_work+0x1b3/0x3c0
 worker_thread+0x30/0x350
 ? process_one_work+0x3c0/0x3c0
 kthread+0xe6/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>
Fixes 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
---
 net/ipv4/tcp_bpf.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
net/ipv4/tcp_bpf.c +3 -4
index 1584863bbdc1..bcc13368c836 100644
@@ -296,10 +296,9 @@ int tcp_bpf_sendmsg_redir(struct sock *sk, struct sk_msg *msg,
 	struct sk_psock *psock = sk_psock_get(sk);
 	int ret;
 
-	if (unlikely(!psock)) {
-		sk_msg_free(sk, msg);
-		return 0;
-	}
+	if (unlikely(!psock))
+		return -EPIPE;
+
 	ret = ingress ? bpf_tcp_ingress(sk, psock, msg, bytes, flags) :
 			tcp_bpf_push_locked(sk, msg, bytes, flags, false);
 	sk_psock_put(sk, psock);
Signature · 1 line
2.34.1
author maintainer
#219 lore raw

PATCH 217/475 USB: storage: ums-realtek: fix error code in rts51x_read_mem()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit b07cabb8361dc692522538205552b1b9dab134be ]

The rts51x_read_mem() function should return negative error codes. Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3) which is treated as success by the callers.

---
 drivers/usb/storage/realtek_cr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/storage/realtek_cr.c +1 -1
index 3789698d9d3c..0c423916d7bf 100644
@@ -365,7 +365,7 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 
 	buf = kmalloc(len, GFP_NOIO);
 	if (buf == NULL)
-		return USB_STOR_TRANSPORT_ERROR;
+		return -ENOMEM;
 
 	usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len);
 
Signature · 1 line
2.34.1
author maintainer
#220 lore raw

PATCH 218/475 Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt

In reply to Greg Kroah-Hartman

From: Yake Yang <[email protected]>

[ Upstream commit b062a0b9c1dc1ff63094337dccfe1568d5b62023 ]

Fix the following kernel oops in btmtksdio_interrrupt

[   14.339134]  btmtksdio_interrupt+0x28/0x54
[   14.339139]  process_sdio_pending_irqs+0x68/0x1a0
[   14.339144]  sdio_irq_work+0x40/0x70
[   14.339154]  process_one_work+0x184/0x39c
[   14.339160]  worker_thread+0x228/0x3e8
[   14.339168]  kthread+0x148/0x3ac
[   14.339176]  ret_from_fork+0x10/0x30

That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up.

The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe.

The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out.

When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.

Fixes 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices")
---
 drivers/bluetooth/btmtksdio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/bluetooth/btmtksdio.c +2 -2
index c2eb64bcd5d5..0e7f44461946 100644
@@ -980,6 +980,8 @@ static int btmtksdio_probe(struct sdio_func *func,
 	hdev->manufacturer = 70;
 	set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
 
+	sdio_set_drvdata(func, bdev);
+
 	err = hci_register_dev(hdev);
 	if (err < 0) {
 		dev_err(&func->dev, "Can't register HCI device\n");
@@ -987,8 +989,6 @@ static int btmtksdio_probe(struct sdio_func *func,
 		return err;
 	}
 
-	sdio_set_drvdata(func, bdev);
-
 	/* pm_runtime_enable would be done after the firmware is being
 	 * downloaded because the core layer probably already enables
 	 * runtime PM for this func such as the case host->caps &
Signature · 1 line
2.34.1
author maintainer
#221 lore raw

PATCH 219/475 af_netlink: Fix shift out of bounds in group mask calculation

In reply to Greg Kroah-Hartman

From: Petr Machata <[email protected]>

[ Upstream commit 0caf6d9922192dd1afa8dc2131abfb4df1443b9f ]

When a netlink message is received, netlink_recvmsg() fills in the address of the sender. One of the fields is the 32-bit bitfield nl_groups, which carries the multicast group on which the message was received. The least significant bit corresponds to group 1, and therefore the highest group that the field can represent is 32. Above that, the UB sanitizer flags the out-of-bounds shift attempts.

Which bits end up being set in such case is implementation defined, but it's either going to be a wrong non-zero value, or zero, which is at least not misleading. Make the latter choice deterministic by always setting to 0 for higher-numbered multicast groups.

To get information about membership in groups >= 32, userspace is expected to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO socket option.
[0] https://lwn.net/Articles/147608/

The way to trigger this issue is e.g. through monitoring the BRVLAN group:

	# bridge monitor vlan &
	# ip link add name br type bridge

Which produces the following citation:

	UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
	shift exponent 32 is too large for 32-bit type 'int'
---
 net/netlink/af_netlink.c | 2 ++
 1 file changed, 2 insertions(+)
net/netlink/af_netlink.c +2 -0
index 891e029ad0f8..fb28969899af 100644
@@ -148,6 +148,8 @@ static const struct rhashtable_params netlink_rhashtable_params;
 
 static inline u32 netlink_group_mask(u32 group)
 {
+	if (group > 32)
+		return 0;
 	return group ? 1 << (group - 1) : 0;
 }
 
Signature · 1 line
2.34.1
author maintainer
#222 lore raw

PATCH 220/475 i2c: mux: demux-pinctrl: do not deactivate a master that is not active

In reply to Greg Kroah-Hartman

From: Peter Rosin <[email protected]>

[ Upstream commit 1a22aabf20adf89cb216f566913196128766f25b ]

Attempting to rollback the activation of the current master when the current master has not been activated is bad. priv->cur_chan and priv->cur_adap are both still zeroed out and the rollback may result in attempts to revert an of changeset that has not been applied and do result in calls to both del and put the zeroed out i2c_adapter. Maybe it crashes, or whatever, but it's bad in any case.

Fixes e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'")
---
 drivers/i2c/muxes/i2c-demux-pinctrl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/i2c/muxes/i2c-demux-pinctrl.c +3 -2
index 5365199a31f4..f7a7405d4350 100644
@@ -261,7 +261,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 	err = device_create_file(&pdev->dev, &dev_attr_available_masters);
 	if (err)
-		goto err_rollback;
+		goto err_rollback_activation;
 
 	err = device_create_file(&pdev->dev, &dev_attr_current_master);
 	if (err)
@@ -271,8 +271,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 err_rollback_available:
 	device_remove_file(&pdev->dev, &dev_attr_available_masters);
-err_rollback:
+err_rollback_activation:
 	i2c_demux_deactivate_master(priv);
+err_rollback:
 	for (j = 0; j < i; j++) {
 		of_node_put(priv->chan[j].parent_np);
 		of_changeset_destroy(&priv->chan[j].chgset);
Signature · 1 line
2.34.1
author maintainer
#223 lore raw

PATCH 221/475 selftests/bpf/test_lirc_mode2.sh: Exit with proper code

In reply to Greg Kroah-Hartman

From: Hangbin Liu <[email protected]>

[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ]

When test_lirc_mode2_user exec failed, the test report failed but still exit with 0. Fix it by exiting with an error code.

Another issue is for the LIRCDEV checking. With bash -n, we need to quote the variable, or it will always be true. So if test_lirc_mode2_user was not run, just exit with skip code.

Fixes 6bdd533cee9a ("bpf: add selftest for lirc_mode2 type program")
---
 tools/testing/selftests/bpf/test_lirc_mode2.sh | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/testing/selftests/bpf/test_lirc_mode2.sh +4 -1
index ec4e15948e40..5252b91f48a1 100755
@@ -3,6 +3,7 @@
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
+ret=$ksft_skip
 
 msg="skip all tests:"
 if [ $UID != 0 ]; then
@@ -25,7 +26,7 @@ do
 	fi
 done
 
-if [ -n $LIRCDEV ];
+if [ -n "$LIRCDEV" ];
 then
 	TYPE=lirc_mode2
 	./test_lirc_mode2_user $LIRCDEV $INPUTDEV
@@ -36,3 +37,5 @@ then
 		echo -e ${GREEN}"PASS: $TYPE"${NC}
 	fi
 fi
+
+exit $ret
Signature · 1 line
2.34.1
author maintainer
#224 lore raw

PATCH 222/475 net: bcmgenet: Use stronger register read/writes to assure ordering

In reply to Greg Kroah-Hartman

From: Jeremy Linton <[email protected]>

[ Upstream commit 8d3ea3d402db94b61075617e71b67459a714a502 ]

GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like:

[  210.074549] ------------[ cut here ]------------
[  210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[  210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[  210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[  210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[  210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E     5.17.0-rc7G12+ #58
[  210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[  210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[  210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  210.161358] pc : dev_watchdog+0x234/0x240
[  210.161364] lr : dev_watchdog+0x234/0x240
[  210.161368] sp : ffff8000080a3a40
[  210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
[  210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
[  210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
[  210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
[  210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
[  210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
[  210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
[  210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
[  210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
[  210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
[  210.269682] Call trace:
[  210.272133]  dev_watchdog+0x234/0x240
[  210.275811]  call_timer_fn+0x3c/0x15c
[  210.279489]  __run_timers.part.0+0x288/0x310
[  210.283777]  run_timer_softirq+0x48/0x80
[  210.287716]  __do_softirq+0x128/0x360
[  210.291392]  __irq_exit_rcu+0x138/0x140
[  210.295243]  irq_exit_rcu+0x1c/0x30
[  210.298745]  el1_interrupt+0x38/0x54
[  210.302334]  el1h_64_irq_handler+0x18/0x24
[  210.306445]  el1h_64_irq+0x7c/0x80
[  210.309857]  arch_cpu_idle+0x18/0x2c
[  210.313445]  default_idle_call+0x4c/0x140
[  210.317470]  cpuidle_idle_call+0x14c/0x1a0
[  210.321584]  do_idle+0xb0/0x100
[  210.324737]  cpu_startup_entry+0x30/0x8c
[  210.328675]  secondary_start_kernel+0xe4/0x110
[  210.333138]  __secondary_switched+0x94/0x98

The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations.

Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere.

Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems with this commit are targeted at relaxing only the performance critical code paths after assuring proper barriers.

---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/genet/bcmgenet.c +2 -2
index 2affdddc12bf..7a8a53807909 100644
@@ -80,7 +80,7 @@ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
 	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		__raw_writel(value, offset);
 	else
-		writel_relaxed(value, offset);
+		writel(value, offset);
 }
 
 static inline u32 bcmgenet_readl(void __iomem *offset)
@@ -88,7 +88,7 @@ static inline u32 bcmgenet_readl(void __iomem *offset)
 	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		return __raw_readl(offset);
 	else
-		return readl_relaxed(offset);
+		return readl(offset);
 }
 
 static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
Signature · 1 line
2.34.1
#225 lore raw

Re: [PATCH 5.4 222/475] net: bcmgenet: Use stronger register read/writes to assure ordering

Hi,

I would kill this commit since the final conclusion was that underlying problem was a compiler bug (which has now been fixed).

Thanks,

Quoted 107 lines · Greg Kroah-Hartman

From: Jeremy Linton <[email protected]>

[ Upstream commit 8d3ea3d402db94b61075617e71b67459a714a502 ]

GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like:

[  210.074549] ------------[ cut here ]------------
[  210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[  210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[  210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[  210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[  210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E     5.17.0-rc7G12+ #58
[  210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[  210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[  210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  210.161358] pc : dev_watchdog+0x234/0x240
[  210.161364] lr : dev_watchdog+0x234/0x240
[  210.161368] sp : ffff8000080a3a40
[  210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
[  210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
[  210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
[  210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
[  210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
[  210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
[  210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
[  210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
[  210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
[  210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
[  210.269682] Call trace:
[  210.272133]  dev_watchdog+0x234/0x240
[  210.275811]  call_timer_fn+0x3c/0x15c
[  210.279489]  __run_timers.part.0+0x288/0x310
[  210.283777]  run_timer_softirq+0x48/0x80
[  210.287716]  __do_softirq+0x128/0x360
[  210.291392]  __irq_exit_rcu+0x138/0x140
[  210.295243]  irq_exit_rcu+0x1c/0x30
[  210.298745]  el1_interrupt+0x38/0x54
[  210.302334]  el1h_64_irq_handler+0x18/0x24
[  210.306445]  el1h_64_irq+0x7c/0x80
[  210.309857]  arch_cpu_idle+0x18/0x2c
[  210.313445]  default_idle_call+0x4c/0x140
[  210.317470]  cpuidle_idle_call+0x14c/0x1a0
[  210.321584]  do_idle+0xb0/0x100
[  210.324737]  cpu_startup_entry+0x30/0x8c
[  210.328675]  secondary_start_kernel+0xe4/0x110
[  210.333138]  __secondary_switched+0x94/0x98

The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations.

Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere.

Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems with this commit are targeted at relaxing only the performance critical code paths after assuring proper barriers.

---
  drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/genet/bcmgenet.c +2 -2
index 2affdddc12bf..7a8a53807909 100644
@@ -80,7 +80,7 @@ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
  	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
  		__raw_writel(value, offset);
  	else
-		writel_relaxed(value, offset);
+		writel(value, offset);
  }
 
  static inline u32 bcmgenet_readl(void __iomem *offset)
@@ -88,7 +88,7 @@ static inline u32 bcmgenet_readl(void __iomem *offset)
  	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
  		return __raw_readl(offset);
  	else
-		return readl_relaxed(offset);
+		return readl(offset);
  }
 
  static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
author maintainer
#226 lore raw

Re: [PATCH 5.4 222/475] net: bcmgenet: Use stronger register read/writes to assure ordering

Quoted 4 lines · Jeremy Linton

Hi,

I would kill this commit since the final conclusion was that underlying problem was a compiler bug (which has now been fixed).

Ok, thanks, now dropped from all queues.

greg k-h

author maintainer
#227 lore raw

PATCH 223/475 tcp: ensure PMTU updates are processed during fastopen

In reply to Greg Kroah-Hartman

From: Jakub Kicinski <[email protected]>

[ Upstream commit ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39 ]

tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we rise it to the local MSS. tp->mss_cache is not updated, however:

tcp_v6_connect():
tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
tcp_connect():

     tcp_connect_init():
       tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
     tcp_send_syn_data():
       tp->rx_opt.mss_clamp = tp->advmss

After recent fixes to ICMPv6 PTB handling we started dropping PMTU updates higher than tp->mss_cache. Because of the stale tp->mss_cache value PMTU updates during TFO are always dropped.

Thanks to Wei for helping zero in on the problem and the fix!

---
 net/ipv4/tcp_output.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/ipv4/tcp_output.c +4 -1
index 638d7b49ad71..139e962d1aef 100644
@@ -3492,6 +3492,7 @@ static void tcp_connect_queue_skb(struct sock *sk, struct sk_buff *skb)
  */
 static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
 {
+	struct inet_connection_sock *icsk = inet_csk(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcp_fastopen_request *fo = tp->fastopen_req;
 	int space, err = 0;
@@ -3506,8 +3507,10 @@ static int tcp_send_syn_data(struct sock *sk, struct sk_buff *syn)
 	 * private TCP options. The cost is reduced data space in SYN :(
 	 */
 	tp->rx_opt.mss_clamp = tcp_mss_clamp(tp, tp->rx_opt.mss_clamp);
+	/* Sync mss_cache after updating the mss_clamp */
+	tcp_sync_mss(sk, icsk->icsk_pmtu_cookie);
 
-	space = __tcp_mtu_to_mss(sk, inet_csk(sk)->icsk_pmtu_cookie) -
+	space = __tcp_mtu_to_mss(sk, icsk->icsk_pmtu_cookie) -
 		MAX_TCP_OPTION_SPACE;
 
 	space = min_t(size_t, space, fo->size);
Signature · 1 line
2.34.1
author maintainer
#228 lore raw

PATCH 224/475 openvswitch: always update flow key after nat

In reply to Greg Kroah-Hartman

From: Aaron Conole <[email protected]>

[ Upstream commit 60b44ca6bd7518dd38fa2719bc9240378b6172c3 ]

During NAT, a tuple collision may occur. When this happens, openvswitch will make a second pass through NAT which will perform additional packet modification. This will update the skb data, but not the flow key that OVS uses. This means that future flow lookups, and packet matches will have incorrect data. This has been supported since 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack").

That commit failed to properly update the sw_flow_key attributes, since it only called the ovs_ct_nat_update_key once, rather than each time ovs_ct_nat_execute was called. As these two operations are linked, the ovs_ct_nat_execute() function should always make sure that the sw_flow_key is updated after a successful call through NAT infrastructure.

Fixes 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack")
Cc Dumitru Ceara <[email protected]>
Cc Numan Siddique <[email protected]>
---
 net/openvswitch/conntrack.c | 118 ++++++++++++++++++------------------
 1 file changed, 59 insertions(+), 59 deletions(-)
net/openvswitch/conntrack.c +59 -59
index b6f98eba71f1..816036b9c223 100644
@@ -730,6 +730,57 @@ static bool skb_nfct_cached(struct net *net,
 }
 
 #if IS_ENABLED(CONFIG_NF_NAT)
+static void ovs_nat_update_key(struct sw_flow_key *key,
+			       const struct sk_buff *skb,
+			       enum nf_nat_manip_type maniptype)
+{
+	if (maniptype == NF_NAT_MANIP_SRC) {
+		__be16 src;
+
+		key->ct_state |= OVS_CS_F_SRC_NAT;
+		if (key->eth.type == htons(ETH_P_IP))
+			key->ipv4.addr.src = ip_hdr(skb)->saddr;
+		else if (key->eth.type == htons(ETH_P_IPV6))
+			memcpy(&key->ipv6.addr.src, &ipv6_hdr(skb)->saddr,
+			       sizeof(key->ipv6.addr.src));
+		else
+			return;
+
+		if (key->ip.proto == IPPROTO_UDP)
+			src = udp_hdr(skb)->source;
+		else if (key->ip.proto == IPPROTO_TCP)
+			src = tcp_hdr(skb)->source;
+		else if (key->ip.proto == IPPROTO_SCTP)
+			src = sctp_hdr(skb)->source;
+		else
+			return;
+
+		key->tp.src = src;
+	} else {
+		__be16 dst;
+
+		key->ct_state |= OVS_CS_F_DST_NAT;
+		if (key->eth.type == htons(ETH_P_IP))
+			key->ipv4.addr.dst = ip_hdr(skb)->daddr;
+		else if (key->eth.type == htons(ETH_P_IPV6))
+			memcpy(&key->ipv6.addr.dst, &ipv6_hdr(skb)->daddr,
+			       sizeof(key->ipv6.addr.dst));
+		else
+			return;
+
+		if (key->ip.proto == IPPROTO_UDP)
+			dst = udp_hdr(skb)->dest;
+		else if (key->ip.proto == IPPROTO_TCP)
+			dst = tcp_hdr(skb)->dest;
+		else if (key->ip.proto == IPPROTO_SCTP)
+			dst = sctp_hdr(skb)->dest;
+		else
+			return;
+
+		key->tp.dst = dst;
+	}
+}
+
 /* Modelled after nf_nat_ipv[46]_fn().
  * range is only used for new, uninitialized NAT state.
  * Returns either NF_ACCEPT or NF_DROP.
@@ -737,7 +788,7 @@ static bool skb_nfct_cached(struct net *net,
 static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
 			      enum ip_conntrack_info ctinfo,
 			      const struct nf_nat_range2 *range,
-			      enum nf_nat_manip_type maniptype)
+			      enum nf_nat_manip_type maniptype, struct sw_flow_key *key)
 {
 	int hooknum, nh_off, err = NF_ACCEPT;
 
@@ -810,58 +861,11 @@ static int ovs_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
 	skb_push(skb, nh_off);
 	skb_postpush_rcsum(skb, skb->data, nh_off);
 
-	return err;
-}
-
-static void ovs_nat_update_key(struct sw_flow_key *key,
-			       const struct sk_buff *skb,
-			       enum nf_nat_manip_type maniptype)
-{
-	if (maniptype == NF_NAT_MANIP_SRC) {
-		__be16 src;
-
-		key->ct_state |= OVS_CS_F_SRC_NAT;
-		if (key->eth.type == htons(ETH_P_IP))
-			key->ipv4.addr.src = ip_hdr(skb)->saddr;
-		else if (key->eth.type == htons(ETH_P_IPV6))
-			memcpy(&key->ipv6.addr.src, &ipv6_hdr(skb)->saddr,
-			       sizeof(key->ipv6.addr.src));
-		else
-			return;
-
-		if (key->ip.proto == IPPROTO_UDP)
-			src = udp_hdr(skb)->source;
-		else if (key->ip.proto == IPPROTO_TCP)
-			src = tcp_hdr(skb)->source;
-		else if (key->ip.proto == IPPROTO_SCTP)
-			src = sctp_hdr(skb)->source;
-		else
-			return;
-
-		key->tp.src = src;
-	} else {
-		__be16 dst;
-
-		key->ct_state |= OVS_CS_F_DST_NAT;
-		if (key->eth.type == htons(ETH_P_IP))
-			key->ipv4.addr.dst = ip_hdr(skb)->daddr;
-		else if (key->eth.type == htons(ETH_P_IPV6))
-			memcpy(&key->ipv6.addr.dst, &ipv6_hdr(skb)->daddr,
-			       sizeof(key->ipv6.addr.dst));
-		else
-			return;
-
-		if (key->ip.proto == IPPROTO_UDP)
-			dst = udp_hdr(skb)->dest;
-		else if (key->ip.proto == IPPROTO_TCP)
-			dst = tcp_hdr(skb)->dest;
-		else if (key->ip.proto == IPPROTO_SCTP)
-			dst = sctp_hdr(skb)->dest;
-		else
-			return;
+	/* Update the flow key if NAT successful. */
+	if (err == NF_ACCEPT)
+		ovs_nat_update_key(key, skb, maniptype);
 
-		key->tp.dst = dst;
-	}
+	return err;
 }
 
 /* Returns NF_DROP if the packet should be dropped, NF_ACCEPT otherwise. */
@@ -903,7 +907,7 @@ static int ovs_ct_nat(struct net *net, struct sw_flow_key *key,
 	} else {
 		return NF_ACCEPT; /* Connection is not NATed. */
 	}
-	err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype);
+	err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range, maniptype, key);
 
 	if (err == NF_ACCEPT && ct->status & IPS_DST_NAT) {
 		if (ct->status & IPS_SRC_NAT) {
@@ -913,17 +917,13 @@ static int ovs_ct_nat(struct net *net, struct sw_flow_key *key,
 				maniptype = NF_NAT_MANIP_SRC;
 
 			err = ovs_ct_nat_execute(skb, ct, ctinfo, &info->range,
-						 maniptype);
+						 maniptype, key);
 		} else if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) {
 			err = ovs_ct_nat_execute(skb, ct, ctinfo, NULL,
-						 NF_NAT_MANIP_SRC);
+						 NF_NAT_MANIP_SRC, key);
 		}
 	}
 
-	/* Mark NAT done if successful and update the flow key. */
-	if (err == NF_ACCEPT)
-		ovs_nat_update_key(key, skb, maniptype);
-
 	return err;
 }
 #else /* !CONFIG_NF_NAT */
Signature · 1 line
2.34.1
author maintainer
#229 lore raw

PATCH 225/475 tipc: fix the timer expires after interval 100ms

In reply to Greg Kroah-Hartman

From: Hoang Le <[email protected]>

[ Upstream commit 6a7d8cff4a3301087dd139293e9bddcf63827282 ]

In the timer callback function tipc_sk_timeout(), we're trying to reschedule another timeout to retransmit a setup request if destination link is congested. But we use the incorrect timeout value (msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)), so that the timer expires immediately, it's irrelevant for original description.

In this commit we correct the timeout value in sk_reset_timer()

Fixes 6787927475e5 ("tipc: buffer overflow handling in listener socket")
---
 net/tipc/socket.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/tipc/socket.c +2 -1
index f4217673eee7..d543c4556df2 100644
@@ -2698,7 +2698,8 @@ static void tipc_sk_retry_connect(struct sock *sk, struct sk_buff_head *list)
 
 	/* Try again later if dest link is congested */
 	if (tsk->cong_link_cnt) {
-		sk_reset_timer(sk, &sk->sk_timer, msecs_to_jiffies(100));
+		sk_reset_timer(sk, &sk->sk_timer,
+			       jiffies + msecs_to_jiffies(100));
 		return;
 	}
 	/* Prepare SYN for retransmit */
Signature · 1 line
2.34.1
author maintainer
#230 lore raw

PATCH 226/475 mfd: asic3: Add missing iounmap() on error asic3_mfd_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit e84ee1a75f944a0fe3c277aaa10c426603d2b0bc ]

Add the missing iounmap() before return from asic3_mfd_probe in the error handling case.

Fixes 64e8867ba809 ("mfd: tmio_mmc hardware abstraction for CNF area")
---
 drivers/mfd/asic3.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/mfd/asic3.c +7 -3
index a6bd2134cea2..14e4bbe6a9da 100644
@@ -914,14 +914,14 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
 		ret = mfd_add_devices(&pdev->dev, pdev->id,
 			&asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL);
 		if (ret < 0)
-			goto out;
+			goto out_unmap;
 	}
 
 	if (mem_sdio && (irq >= 0)) {
 		ret = mfd_add_devices(&pdev->dev, pdev->id,
 			&asic3_cell_mmc, 1, mem_sdio, irq, NULL);
 		if (ret < 0)
-			goto out;
+			goto out_unmap;
 	}
 
 	ret = 0;
@@ -935,8 +935,12 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
 		ret = mfd_add_devices(&pdev->dev, 0,
 			asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL);
 	}
+	return ret;
 
- out:
+out_unmap:
+	if (asic->tmio_cnf)
+		iounmap(asic->tmio_cnf);
+out:
 	return ret;
 }
 
Signature · 1 line
2.34.1
author maintainer
#231 lore raw

PATCH 227/475 mxser: fix xmit_buf leak in activate when LSR == 0xff

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

[ Upstream commit cd3a4907ee334b40d7aa880c7ab310b154fd5cd4 ]

When LSR is 0xff in ->activate() (rather unlike), we return an error. Provided ->shutdown() is not called when ->activate() fails, nothing actually frees the buffer in this case.

Fix this by properly freeing the buffer in a designated label. We jump there also from the "!info->type" if now too.

Fixes 6769140d3047 ("tty: mxser: use the tty_port_open method")
---
 drivers/tty/mxser.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/tty/mxser.c +11 -4
index 9d00ff5ef961..085dc8dd1327 100644
@@ -861,6 +861,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 	struct mxser_port *info = container_of(port, struct mxser_port, port);
 	unsigned long page;
 	unsigned long flags;
+	int ret;
 
 	page = __get_free_page(GFP_KERNEL);
 	if (!page)
@@ -870,9 +871,9 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 
 	if (!info->ioaddr || !info->type) {
 		set_bit(TTY_IO_ERROR, &tty->flags);
-		free_page(page);
 		spin_unlock_irqrestore(&info->slock, flags);
-		return 0;
+		ret = 0;
+		goto err_free_xmit;
 	}
 	info->port.xmit_buf = (unsigned char *) page;
 
@@ -898,8 +899,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 		if (capable(CAP_SYS_ADMIN)) {
 			set_bit(TTY_IO_ERROR, &tty->flags);
 			return 0;
-		} else
-			return -ENODEV;
+		}
+
+		ret = -ENODEV;
+		goto err_free_xmit;
 	}
 
 	/*
@@ -944,6 +947,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
 	spin_unlock_irqrestore(&info->slock, flags);
 
 	return 0;
+err_free_xmit:
+	free_page(page);
+	info->port.xmit_buf = NULL;
+	return ret;
 }
 
 /*
Signature · 1 line
2.34.1
author maintainer
#232 lore raw

PATCH 228/475 pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()

In reply to Greg Kroah-Hartman

From: Uwe Kleine-König <[email protected]>

[ Upstream commit 0401f24cd238ae200a23a13925f98de3d2c883b8 ]

When a driver calls pwmchip_add() it has to be prepared to immediately get its callbacks called. So move allocation of driver data and hardware initialization before the call to pwmchip_add().

This fixes a potential NULL pointer exception and a race condition on register writes.

Fixes 841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver")
---
 drivers/pwm/pwm-lpc18xx-sct.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/pwm/pwm-lpc18xx-sct.c +9 -11
index 5ff11145c1a3..9b15b6a79082 100644
@@ -400,12 +400,6 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_LIMIT,
 			   BIT(lpc18xx_pwm->period_event));
 
-	ret = pwmchip_add(&lpc18xx_pwm->chip);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
-		goto disable_pwmclk;
-	}
-
 	for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
 		struct lpc18xx_pwm_data *data;
 
@@ -415,14 +409,12 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 				    GFP_KERNEL);
 		if (!data) {
 			ret = -ENOMEM;
-			goto remove_pwmchip;
+			goto disable_pwmclk;
 		}
 
 		pwm_set_chip_data(pwm, data);
 	}
 
-	platform_set_drvdata(pdev, lpc18xx_pwm);
-
 	val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
 	val &= ~LPC18XX_PWM_BIDIR;
 	val &= ~LPC18XX_PWM_CTRL_HALT;
@@ -430,10 +422,16 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	val |= LPC18XX_PWM_PRE(0);
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
 
+	ret = pwmchip_add(&lpc18xx_pwm->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
+		goto disable_pwmclk;
+	}
+
+	platform_set_drvdata(pdev, lpc18xx_pwm);
+
 	return 0;
 
-remove_pwmchip:
-	pwmchip_remove(&lpc18xx_pwm->chip);
 disable_pwmclk:
 	clk_disable_unprepare(lpc18xx_pwm->pwm_clk);
 	return ret;
Signature · 1 line
2.34.1
author maintainer
#233 lore raw

PATCH 229/475 misc: alcor_pci: Fix an error handling path

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 5b3dc949f554379edcb8ef6111aa5ecb78feb798 ]

A successful ida_simple_get() should be balanced by a corresponding ida_simple_remove().

Add the missing call in the error handling path of the probe.

While at it, switch to ida_alloc()/ida_free() instead to ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.

---
 drivers/misc/cardreader/alcor_pci.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/misc/cardreader/alcor_pci.c +6 -3
index 1fadb95b85b0..ba5d5c102b3c 100644
@@ -260,7 +260,7 @@ static int alcor_pci_probe(struct pci_dev *pdev,
 	if (!priv)
 		return -ENOMEM;
 
-	ret = ida_simple_get(&alcor_pci_idr, 0, 0, GFP_KERNEL);
+	ret = ida_alloc(&alcor_pci_idr, GFP_KERNEL);
 	if (ret < 0)
 		return ret;
 	priv->id = ret;
@@ -274,7 +274,8 @@ static int alcor_pci_probe(struct pci_dev *pdev,
 	ret = pci_request_regions(pdev, DRV_NAME_ALCOR_PCI);
 	if (ret) {
 		dev_err(&pdev->dev, "Cannot request region\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto error_free_ida;
 	}
 
 	if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
@@ -318,6 +319,8 @@ static int alcor_pci_probe(struct pci_dev *pdev,
 
 error_release_regions:
 	pci_release_regions(pdev);
+error_free_ida:
+	ida_free(&alcor_pci_idr, priv->id);
 	return ret;
 }
 
@@ -331,7 +334,7 @@ static void alcor_pci_remove(struct pci_dev *pdev)
 
 	mfd_remove_devices(&pdev->dev);
 
-	ida_simple_remove(&alcor_pci_idr, priv->id);
+	ida_free(&alcor_pci_idr, priv->id);
 
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
Signature · 1 line
2.34.1
author maintainer
#234 lore raw

PATCH 230/475 staging:iio:adc:ad7280a: Fix handing of device address bit reversing.

In reply to Greg Kroah-Hartman

From: Jonathan Cameron <[email protected]>

[ Upstream commit f281e4ddbbc0b60f061bc18a2834e9363ba85f9f ]

The bit reversal was wrong for bits 1 and 3 of the 5 bits. Result is driver failure to probe if you have more than 2 daisy-chained devices. Discovered via QEMU based device emulation.

Fixes tag is for when this moved from a macro to a function, but it was broken before that.

Fixes 065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse")
---
 drivers/staging/iio/adc/ad7280a.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/iio/adc/ad7280a.c +2 -2
index 19a5f244dcae..d8886c5c0d1f 100644
@@ -107,9 +107,9 @@
 static unsigned int ad7280a_devaddr(unsigned int addr)
 {
 	return ((addr & 0x1) << 4) |
-	       ((addr & 0x2) << 3) |
+	       ((addr & 0x2) << 2) |
 	       (addr & 0x4) |
-	       ((addr & 0x8) >> 3) |
+	       ((addr & 0x8) >> 2) |
 	       ((addr & 0x10) >> 4);
 }
 
Signature · 1 line
2.34.1
author maintainer
#235 lore raw

PATCH 231/475 pinctrl: renesas: r8a77470: Reduce size for narrow VIN1 channel

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 9e04a0eda84fccab0ac22a33825ad53f47c968c7 ]

The second video-in channel on RZ/G1C has only 12 data lanes, but the pin control driver uses the vin_data union, which is meant for 24 data lanes, thus wasting space.

Fix this by using the vin_data12 union instead.

This reduces kernel size by 96 bytes.

---
 drivers/pinctrl/sh-pfc/pfc-r8a77470.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pinctrl/sh-pfc/pfc-r8a77470.c +2 -2
index b3b116da1bb0..14005725a726 100644
@@ -2121,7 +2121,7 @@ static const unsigned int vin0_clk_mux[] = {
 	VI0_CLK_MARK,
 };
 /* - VIN1 ------------------------------------------------------------------- */
-static const union vin_data vin1_data_pins = {
+static const union vin_data12 vin1_data_pins = {
 	.data12 = {
 		RCAR_GP_PIN(3,  1), RCAR_GP_PIN(3, 2),
 		RCAR_GP_PIN(3,  3), RCAR_GP_PIN(3, 4),
@@ -2131,7 +2131,7 @@ static const union vin_data vin1_data_pins = {
 		RCAR_GP_PIN(3, 15), RCAR_GP_PIN(3, 16),
 	},
 };
-static const union vin_data vin1_data_mux = {
+static const union vin_data12 vin1_data_mux = {
 	.data12 = {
 		VI1_DATA0_MARK, VI1_DATA1_MARK,
 		VI1_DATA2_MARK, VI1_DATA3_MARK,
Signature · 1 line
2.34.1
author maintainer
#236 lore raw

PATCH 232/475 clk: qcom: ipq8074: Use floor ops for SDCC1 clock

In reply to Greg Kroah-Hartman

From: Dirk Buchwalder <[email protected]>

[ Upstream commit b77d8306d84f83d1da68028a68c91da9c867b6f6 ]

Use floor ops on SDCC1 APPS clock in order to round down selected clock frequency and avoid overclocking SD/eMMC cards.

For example, currently HS200 cards were failling tuning as they were actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the standard HS mode (50MHz) and that appeared to work despite the eMMC being overclocked to 96Mhz in that case.

There was a previous commit to use floor ops on SDCC clocks, but it looks to have only covered SDCC2 clock.

Fixes 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
---
 drivers/clk/qcom/gcc-ipq8074.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/qcom/gcc-ipq8074.c +1 -1
index e01f5f591d1e..de48ba7eba3a 100644
@@ -1074,7 +1074,7 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
 		.name = "sdcc1_apps_clk_src",
 		.parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2,
 		.num_parents = 4,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 
Signature · 1 line
2.34.1
author maintainer
#237 lore raw

PATCH 233/475 phy: dphy: Correct lpx parameter and its derivatives(ta_{get,go,sure})

In reply to Greg Kroah-Hartman

From: Liu Ying <[email protected]>

[ Upstream commit 3153fa38e38af566cf6454a03b1dbadaf6f323c0 ]

According to the comment of the function phy_mipi_dphy_get_default_config(), it uses minimum D-PHY timings based on MIPI D-PHY specification. They are derived from the valid ranges specified in Section 6.9, Table 14, Page 41 of the D-PHY specification (v1.2). The table 14 explicitly mentions that the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and 'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that the minimum values are 50000 picoseconds and @lpx picoseconds respectively. Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx, which hints the same minimum values.

Without this patch, the function phy_mipi_dphy_get_default_config() wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx. So, let's correct them to 50000 picoseconds and cfg->lpx respectively.

Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares.

Fixes dddc97e82303 ("phy: dphy: Add configuration helpers")
Cc Andrzej Hajda <[email protected]>
Cc Neil Armstrong <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Kishon Vijay Abraham I <[email protected]>
Cc Vinod Koul <[email protected]>
Cc Heiko Stuebner <[email protected]>
Cc Maxime Ripard <[email protected]>
Cc Guido Günther <[email protected]>
---
 drivers/phy/phy-core-mipi-dphy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/phy/phy-core-mipi-dphy.c +2 -2
index 14e0551cd319..0aa740b73d0d 100644
@@ -66,10 +66,10 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
 	cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
 
 	cfg->init = 100;
-	cfg->lpx = 60000;
+	cfg->lpx = 50000;
 	cfg->ta_get = 5 * cfg->lpx;
 	cfg->ta_go = 4 * cfg->lpx;
-	cfg->ta_sure = 2 * cfg->lpx;
+	cfg->ta_sure = cfg->lpx;
 	cfg->wakeup = 1000;
 
 	cfg->hs_clk_rate = hs_clk_rate;
Signature · 1 line
2.34.1
author maintainer
#238 lore raw

PATCH 234/475 serial: 8250_mid: Balance reference count for PCI DMA device

In reply to Greg Kroah-Hartman

From: Andy Shevchenko <[email protected]>

[ Upstream commit 67ec6dd0b257bd81b4e9fcac89b29da72f6265e5 ]

The pci_get_slot() increases its reference count, the caller must decrement the reference count by calling pci_dev_put().

Fixes 90b9aacf912a ("serial: 8250_pci: add Intel Tangier support")
Fixes f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports")

Depends-on: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")

---
 drivers/tty/serial/8250/8250_mid.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
drivers/tty/serial/8250/8250_mid.c +15 -4
index efa0515139f8..e6c1791609dd 100644
@@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
 	return 0;
 }
 
+static void pnw_exit(struct mid8250 *mid)
+{
+	pci_dev_put(mid->dma_dev);
+}
+
 static int tng_handle_irq(struct uart_port *p)
 {
 	struct mid8250 *mid = p->private_data;
@@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
 	return 0;
 }
 
+static void tng_exit(struct mid8250 *mid)
+{
+	pci_dev_put(mid->dma_dev);
+}
+
 static int dnv_handle_irq(struct uart_port *p)
 {
 	struct mid8250 *mid = p->private_data;
@@ -330,9 +340,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	pci_set_drvdata(pdev, mid);
 	return 0;
+
 err:
-	if (mid->board->exit)
-		mid->board->exit(mid);
+	mid->board->exit(mid);
 	return ret;
 }
 
@@ -342,8 +352,7 @@ static void mid8250_remove(struct pci_dev *pdev)
 
 	serial8250_unregister_port(mid->line);
 
-	if (mid->board->exit)
-		mid->board->exit(mid);
+	mid->board->exit(mid);
 }
 
 static const struct mid8250_board pnw_board = {
@@ -351,6 +360,7 @@ static const struct mid8250_board pnw_board = {
 	.freq = 50000000,
 	.base_baud = 115200,
 	.setup = pnw_setup,
+	.exit = pnw_exit,
 };
 
 static const struct mid8250_board tng_board = {
@@ -358,6 +368,7 @@ static const struct mid8250_board tng_board = {
 	.freq = 38400000,
 	.base_baud = 1843200,
 	.setup = tng_setup,
+	.exit = tng_exit,
 };
 
 static const struct mid8250_board dnv_board = {
Signature · 1 line
2.34.1
author maintainer
#239 lore raw

PATCH 235/475 serial: 8250: Fix race condition in RTS-after-send handling

In reply to Greg Kroah-Hartman

From: Uwe Kleine-König <[email protected]>

[ Upstream commit dedab69fd650ea74710b2e626e63fd35584ef773 ]

Set em485->active_timer = NULL isn't always enough to take out the stop timer. While there is a check that it acts in the right state (i.e. waiting for RTS-after-send to pass after sending some chars) but the following might happen:

- CPU1: some chars send, shifter becomes empty, stop tx timer armed
- CPU0: more chars send before RTS-after-send expired
- CPU0: shifter empty irq, port lock taken
- CPU1: tx timer triggers, waits for port lock
- CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(), releases lock()
- CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer, tear down RTS too early

This fix bases on research done by Steffen Trumtrar.

Fixes b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
---
 drivers/tty/serial/8250/8250_port.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/tty/serial/8250/8250_port.c +12 -0
index 777ef1a9591c..87567515591e 100644
@@ -1545,6 +1545,18 @@ static inline void start_tx_rs485(struct uart_port *port)
 	if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
 		serial8250_stop_rx(&up->port);
 
+	/*
+	 * While serial8250_em485_handle_stop_tx() is a noop if
+	 * em485->active_timer != &em485->stop_tx_timer, it might happen that
+	 * the timer is still armed and triggers only after the current bunch of
+	 * chars is send and em485->active_timer == &em485->stop_tx_timer again.
+	 * So cancel the timer. There is still a theoretical race condition if
+	 * the timer is already running and only comes around to check for
+	 * em485->active_timer when &em485->stop_tx_timer is armed again.
+	 */
+	if (em485->active_timer == &em485->stop_tx_timer)
+		hrtimer_try_to_cancel(&em485->stop_tx_timer);
+
 	em485->active_timer = NULL;
 
 	mcr = serial8250_in_MCR(up);
Signature · 1 line
2.34.1
author maintainer
#240 lore raw

PATCH 236/475 iio: adc: Add check for devm_request_threaded_irq

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit b30537a4cedcacf0ade2f33ebb7610178ed1e7d7 ]

As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value and return error if fails.

Fixes fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family")
---
 drivers/iio/adc/twl6030-gpadc.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/iio/adc/twl6030-gpadc.c +2 -0
index f24148bd15de..fb77c3ff5a3e 100644
@@ -911,6 +911,8 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
 	ret = devm_request_threaded_irq(dev, irq, NULL,
 				twl6030_gpadc_irq_handler,
 				IRQF_ONESHOT, "twl6030_gpadc", indio_dev);
+	if (ret)
+		return ret;
 
 	ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK);
 	if (ret < 0) {
Signature · 1 line
2.34.1
author maintainer
#241 lore raw

PATCH 237/475 NFS: Return valid errors from nfs2/3_decode_dirent()

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 64cfca85bacde54caa64e0ab855c48734894fa37 ]

Valid return values for decode_dirent() callback functions are:
0: Success
-EBADCOOKIE: End of directory
-EAGAIN: End of xdr_stream

All errors need to map into one of those three values.

Fixes 573c4e1ef53a ("NFS: Simplify ->decode_dirent() calling sequence")
---
 fs/nfs/nfs2xdr.c |  2 +-
 fs/nfs/nfs3xdr.c | 21 ++++++---------------
 2 files changed, 7 insertions(+), 16 deletions(-)
fs/nfs/nfs2xdr.c +1 -1
index 887f9136a9db..af557dc2cfe1 100644
@@ -953,7 +953,7 @@ int nfs2_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 
 	error = decode_filename_inline(xdr, &entry->name, &entry->len);
 	if (unlikely(error))
-		return error;
+		return -EAGAIN;
 
 	/*
 	 * The type (size and byte order) of nfscookie isn't defined in
fs/nfs/nfs3xdr.c +6 -15
index 23d75cddbb2e..84369d51353a 100644
@@ -1968,7 +1968,6 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 		       bool plus)
 {
 	struct user_namespace *userns = rpc_userns(entry->server->client);
-	struct nfs_entry old = *entry;
 	__be32 *p;
 	int error;
 	u64 new_cookie;
@@ -1988,15 +1987,15 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 
 	error = decode_fileid3(xdr, &entry->ino);
 	if (unlikely(error))
-		return error;
+		return -EAGAIN;
 
 	error = decode_inline_filename3(xdr, &entry->name, &entry->len);
 	if (unlikely(error))
-		return error;
+		return -EAGAIN;
 
 	error = decode_cookie3(xdr, &new_cookie);
 	if (unlikely(error))
-		return error;
+		return -EAGAIN;
 
 	entry->d_type = DT_UNKNOWN;
 
@@ -2004,7 +2003,7 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 		entry->fattr->valid = 0;
 		error = decode_post_op_attr(xdr, entry->fattr, userns);
 		if (unlikely(error))
-			return error;
+			return -EAGAIN;
 		if (entry->fattr->valid & NFS_ATTR_FATTR_V3)
 			entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
 
@@ -2019,11 +2018,8 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 			return -EAGAIN;
 		if (*p != xdr_zero) {
 			error = decode_nfs_fh3(xdr, entry->fh);
-			if (unlikely(error)) {
-				if (error == -E2BIG)
-					goto out_truncated;
-				return error;
-			}
+			if (unlikely(error))
+				return -EAGAIN;
 		} else
 			zero_nfs_fh3(entry->fh);
 	}
@@ -2032,11 +2028,6 @@ int nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 	entry->cookie = new_cookie;
 
 	return 0;
-
-out_truncated:
-	dprintk("NFS: directory entry contains invalid file handle\n");
-	*entry = old;
-	return -EAGAIN;
 }
 
 /*
Signature · 1 line
2.34.1
author maintainer
#242 lore raw

PATCH 238/475 dma-debug: fix return value of __setup handlers

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ]

When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's environment strings, polluting it.

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.

and

Run /sbin/init as init process
with arguments:
/sbin/init
with environment:

     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     dma_debug=off
     dma_debug_entries=100

Return 1 from these __setup handlers to indicate that the command line option has been handled.

Fixes 59d3daafa1726 ("dma-debug: add kernel command line parameters")
Link lore.kernel.org/r/[email protected]
Cc Joerg Roedel <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Marek Szyprowski <[email protected]>
Cc Robin Murphy <[email protected]>
---
 kernel/dma/debug.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/dma/debug.c +2 -2
index b28665f4d8c7..4dc3bbfd3e3f 100644
@@ -980,7 +980,7 @@ static __init int dma_debug_cmdline(char *str)
 		global_disable = true;
 	}
 
-	return 0;
+	return 1;
 }
 
 static __init int dma_debug_entries_cmdline(char *str)
@@ -989,7 +989,7 @@ static __init int dma_debug_entries_cmdline(char *str)
 		return -EINVAL;
 	if (!get_option(&str, &nr_prealloc_entries))
 		nr_prealloc_entries = PREALLOC_DMA_DEBUG_ENTRIES;
-	return 0;
+	return 1;
 }
 
 __setup("dma_debug=", dma_debug_cmdline);
Signature · 8 lines
2.34.1



_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#243 lore raw

PATCH 239/475 clk: imx7d: Remove audio_mclk_root_clk

In reply to Greg Kroah-Hartman

From: Abel Vesa <[email protected]>

[ Upstream commit eccac77ede3946c90143447cdc785dc16aec4b24 ]

The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790), but according to the reference manual, there is no such gate. The CCGR121 belongs to ECSPI2 and it is not shared.

Fixes 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support")
---
 drivers/clk/imx/clk-imx7d.c | 1 -
 1 file changed, 1 deletion(-)
drivers/clk/imx/clk-imx7d.c +0 -1
index fbea774ef687..58577548fe21 100644
@@ -859,7 +859,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	hws[IMX7D_WDOG4_ROOT_CLK] = imx_clk_hw_gate4("wdog4_root_clk", "wdog_post_div", base + 0x49f0, 0);
 	hws[IMX7D_KPP_ROOT_CLK] = imx_clk_hw_gate4("kpp_root_clk", "ipg_root_clk", base + 0x4aa0, 0);
 	hws[IMX7D_CSI_MCLK_ROOT_CLK] = imx_clk_hw_gate4("csi_mclk_root_clk", "csi_mclk_post_div", base + 0x4490, 0);
-	hws[IMX7D_AUDIO_MCLK_ROOT_CLK] = imx_clk_hw_gate4("audio_mclk_root_clk", "audio_mclk_post_div", base + 0x4790, 0);
 	hws[IMX7D_WRCLK_ROOT_CLK] = imx_clk_hw_gate4("wrclk_root_clk", "wrclk_post_div", base + 0x47a0, 0);
 	hws[IMX7D_USB_CTRL_CLK] = imx_clk_hw_gate4("usb_ctrl_clk", "ahb_root_clk", base + 0x4680, 0);
 	hws[IMX7D_USB_PHY1_CLK] = imx_clk_hw_gate4("usb_phy1_clk", "pll_usb1_main_clk", base + 0x46a0, 0);
Signature · 1 line
2.34.1
author maintainer
#244 lore raw

PATCH 240/475 clk: qcom: clk-rcg2: Update logic to calculate D value for RCG

In reply to Greg Kroah-Hartman

From: Taniya Das <[email protected]>

[ Upstream commit 58922910add18583d5273c2edcdb9fd7bf4eca02 ]

The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors.
As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range.

Fixes 99cbd064b059f ("clk: qcom: Support display RCG clocks")
---
 drivers/clk/qcom/clk-rcg2.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/clk/qcom/clk-rcg2.c +11 -2
index a88101480e33..d86c9ad3f6e8 100644
@@ -263,7 +263,7 @@ static int clk_rcg2_determine_floor_rate(struct clk_hw *hw,
 
 static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 {
-	u32 cfg, mask;
+	u32 cfg, mask, d_val, not2d_val, n_minus_m;
 	struct clk_hw *hw = &rcg->clkr.hw;
 	int ret, index = qcom_find_src_index(hw, rcg->parent_map, f->src);
 
@@ -282,8 +282,17 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 		if (ret)
 			return ret;
 
+		/* Calculate 2d value */
+		d_val = f->n;
+
+		n_minus_m = f->n - f->m;
+		n_minus_m *= 2;
+
+		d_val = clamp_t(u32, d_val, f->m, n_minus_m);
+		not2d_val = ~d_val & mask;
+
 		ret = regmap_update_bits(rcg->clkr.regmap,
-				RCG_D_OFFSET(rcg), mask, ~f->n);
+				RCG_D_OFFSET(rcg), mask, not2d_val);
 		if (ret)
 			return ret;
 	}
Signature · 1 line
2.34.1
author maintainer
#245 lore raw

PATCH 241/475 clk: qcom: clk-rcg2: Update the frac table for pixel clock

In reply to Greg Kroah-Hartman

From: Taniya Das <[email protected]>

[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ]

Support the new numerator and denominator for pixel clock on SM8350 and support rgb101010, RGB888 use cases on SM8450.

---
 drivers/clk/qcom/clk-rcg2.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/qcom/clk-rcg2.c +1 -0
index d86c9ad3f6e8..89c1adeb84d4 100644
@@ -647,6 +647,7 @@ static const struct frac_entry frac_table_pixel[] = {
 	{ 2, 9 },
 	{ 4, 9 },
 	{ 1, 1 },
+	{ 2, 3 },
 	{ }
 };
 
Signature · 1 line
2.34.1
author maintainer
#246 lore raw

PATCH 242/475 remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 505b5b1616e200042999de715dbe7c1e2735cd65 ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

Fixes dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
---
 drivers/remoteproc/qcom_q6v5_adsp.c | 1 +
 1 file changed, 1 insertion(+)
drivers/remoteproc/qcom_q6v5_adsp.c +1 -0
index 24e8b7e27177..6b131a490ebf 100644
@@ -389,6 +389,7 @@ static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 	}
 
 	ret = of_address_to_resource(node, 0, &r);
+	of_node_put(node);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.34.1
author maintainer
#247 lore raw

PATCH 243/475 remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 8f90161a66bc3d6b9fe8dde4d9028d20eae1b62a ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

Fixes aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
---
 drivers/remoteproc/qcom_wcnss.c | 1 +
 1 file changed, 1 insertion(+)
drivers/remoteproc/qcom_wcnss.c +1 -0
index dc135754bb9c..c72f1b3b6085 100644
@@ -440,6 +440,7 @@ static int wcnss_alloc_memory_region(struct qcom_wcnss *wcnss)
 	}
 
 	ret = of_address_to_resource(node, 0, &r);
+	of_node_put(node);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.34.1
author maintainer
#248 lore raw

PATCH 244/475 clk: actions: Terminate clk_div_table with sentinel element

In reply to Greg Kroah-Hartman

From: Jonathan Neuschäfer <[email protected]>

[ Upstream commit d8a441e53e2434b1401e52dfd66b05263e442edc ]

In order that the end of a clk_div_table can be detected, it must be terminated with a sentinel element (.div = 0).

In owl-s900.s, the { 0, 8 } element was probably meant to be just that, so this patch changes { 0, 8 } to { 0, 0 }.

Fixes d47317ca4ade1 ("clk: actions: Add S700 SoC clock support")
Fixes d85d20053e195 ("clk: actions: Add S900 SoC clock support")
---
 drivers/clk/actions/owl-s700.c | 1 +
 drivers/clk/actions/owl-s900.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
drivers/clk/actions/owl-s700.c +1 -0
index a2f34d13fb54..6ea7da1d6d75 100644
@@ -162,6 +162,7 @@ static struct clk_div_table hdmia_div_table[] = {
 
 static struct clk_div_table rmii_div_table[] = {
 	{0, 4},   {1, 10},
+	{0, 0}
 };
 
 /* divider clocks */
drivers/clk/actions/owl-s900.c +1 -1
index 790890978424..5144ada2c7e1 100644
@@ -140,7 +140,7 @@ static struct clk_div_table rmii_ref_div_table[] = {
 
 static struct clk_div_table usb3_mac_div_table[] = {
 	{ 1, 2 }, { 2, 3 }, { 3, 4 },
-	{ 0, 8 },
+	{ 0, 0 }
 };
 
 static struct clk_div_table i2s_div_table[] = {
Signature · 1 line
2.34.1
author maintainer
#249 lore raw

PATCH 245/475 clk: loongson1: Terminate clk_div_table with sentinel element

In reply to Greg Kroah-Hartman

From: Jonathan Neuschäfer <[email protected]>

[ Upstream commit 3eb00f89162e80083dfcaa842468b510462cfeaa ]

In order that the end of a clk_div_table can be detected, it must be terminated with a sentinel element (.div = 0).

---
 drivers/clk/loongson1/clk-loongson1c.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/loongson1/clk-loongson1c.c +1 -0
index 703f87622cf5..1ebf740380ef 100644
@@ -37,6 +37,7 @@ static const struct clk_div_table ahb_div_table[] = {
 	[1] = { .val = 1, .div = 4 },
 	[2] = { .val = 2, .div = 3 },
 	[3] = { .val = 3, .div = 3 },
+	[4] = { /* sentinel */ }
 };
 
 void __init ls1x_clk_init(void)
Signature · 1 line
2.34.1
author maintainer
#250 lore raw

PATCH 246/475 clk: clps711x: Terminate clk_div_table with sentinel element

In reply to Greg Kroah-Hartman

From: Jonathan Neuschäfer <[email protected]>

[ Upstream commit 8bed4ed5aa3431085d9d27afc35d684856460eda ]

In order that the end of a clk_div_table can be detected, it must be terminated with a sentinel element (.div = 0).

---
 drivers/clk/clk-clps711x.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/clk-clps711x.c +2 -0
index a2c6486ef170..f8417ee2961a 100644
@@ -28,11 +28,13 @@ static const struct clk_div_table spi_div_table[] = {
 	{ .val = 1, .div = 8, },
 	{ .val = 2, .div = 2, },
 	{ .val = 3, .div = 1, },
+	{ /* sentinel */ }
 };
 
 static const struct clk_div_table timer_div_table[] = {
 	{ .val = 0, .div = 256, },
 	{ .val = 1, .div = 1, },
+	{ /* sentinel */ }
 };
 
 struct clps711x_clk {
Signature · 1 line
2.34.1
author maintainer
#251 lore raw

PATCH 247/475 clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 6d6ef58c2470da85a99119f74d34216c8074b9f0 ]

The reference taken by 'of_find_device_by_node()' must be released when not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

---
 drivers/clk/tegra/clk-emc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/tegra/clk-emc.c +1 -0
index ea39caf3d762..0c1b83bedb73 100644
@@ -191,6 +191,7 @@ static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra)
 
 	tegra->emc = platform_get_drvdata(pdev);
 	if (!tegra->emc) {
+		put_device(&pdev->dev);
 		pr_err("%s: cannot find EMC driver\n", __func__);
 		return NULL;
 	}
Signature · 1 line
2.34.1
author maintainer
#252 lore raw

PATCH 248/475 NFS: remove unneeded check in decode_devicenotify_args()

In reply to Greg Kroah-Hartman

From: Alexey Khoroshilov <[email protected]>

[ Upstream commit cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]

[You don't often get email from [email protected]. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]

Overflow check in not needed anymore after we switch to kmalloc_array().

Fixes a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
---
 fs/nfs/callback_xdr.c | 4 ----
 1 file changed, 4 deletions(-)
fs/nfs/callback_xdr.c +0 -4
index 90b5511c4c44..04d27f0ed39a 100644
@@ -271,10 +271,6 @@ __be32 decode_devicenotify_args(struct svc_rqst *rqstp,
 	n = ntohl(*p++);
 	if (n == 0)
 		goto out;
-	if (n > ULONG_MAX / sizeof(*args->devs)) {
-		status = htonl(NFS4ERR_BADXDR);
-		goto out;
-	}
 
 	args->devs = kmalloc_array(n, sizeof(*args->devs), GFP_KERNEL);
 	if (!args->devs) {
Signature · 1 line
2.34.1
author maintainer
#253 lore raw

PATCH 249/475 staging: mt7621-dts: fix LEDs and pinctrl on GB-PC1 devicetree

In reply to Greg Kroah-Hartman

From: Arınç ÜNAL <[email protected]>

[ Upstream commit 6256e18686158fa49e019297f990f1c1817aabf1 ]

Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the schematics of the device for more information.

LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.

Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.

Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.

---
 drivers/staging/mt7621-dts/gbpc1.dts | 40 +++++++++++++---------------
 1 file changed, 18 insertions(+), 22 deletions(-)
drivers/staging/mt7621-dts/gbpc1.dts +18 -22
index 1fb560ff059c..1713283e60d4 100644
@@ -11,7 +11,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+		reg = <0x00000000 0x1c000000>,
+		      <0x20000000 0x04000000>;
 	};
 
 	chosen {
@@ -37,24 +38,16 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		system {
-			label = "gb-pc1:green:system";
+		power {
+			label = "green:power";
 			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
 		};
 
-		status {
-			label = "gb-pc1:green:status";
+		system {
+			label = "green:system";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1 {
-			label = "gb-pc1:green:lan1";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2 {
-			label = "gb-pc1:green:lan2";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
@@ -94,9 +87,8 @@
 
 		partition@50000 {
 			label = "firmware";
-			reg = <0x50000 0x1FB0000>;
+			reg = <0x50000 0x1fb0000>;
 		};
-
 	};
 };
 
@@ -118,9 +110,12 @@
 };
 
 &pinctrl {
-	state_default: pinctrl0 {
-		default_gpio: gpio {
-			groups = "wdt", "rgmii2", "uart3";
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: state-default {
+		gpio-pinmux {
+			groups = "rgmii2", "uart3", "wdt";
 			function = "gpio";
 		};
 	};
@@ -129,12 +124,13 @@
 &switch0 {
 	ports {
 		port@0 {
+			status = "okay";
 			label = "ethblack";
-			status = "ok";
 		};
+
 		port@4 {
+			status = "okay";
 			label = "ethblue";
-			status = "ok";
 		};
 	};
 };
Signature · 1 line
2.34.1
author maintainer
#254 lore raw

PATCH 250/475 pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

Fixes a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
---
 drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pinctrl/mediatek/pinctrl-mtk-common.c +2 -0
index 53f52b9a0acd..c2df70712ca2 100644
@@ -1038,6 +1038,7 @@ int mtk_pctrl_init(struct platform_device *pdev,
 	node = of_parse_phandle(np, "mediatek,pctl-regmap", 0);
 	if (node) {
 		pctl->regmap1 = syscon_node_to_regmap(node);
+		of_node_put(node);
 		if (IS_ERR(pctl->regmap1))
 			return PTR_ERR(pctl->regmap1);
 	} else if (regmap) {
@@ -1051,6 +1052,7 @@ int mtk_pctrl_init(struct platform_device *pdev,
 	node = of_parse_phandle(np, "mediatek,pctl-regmap", 1);
 	if (node) {
 		pctl->regmap2 = syscon_node_to_regmap(node);
+		of_node_put(node);
 		if (IS_ERR(pctl->regmap2))
 			return PTR_ERR(pctl->regmap2);
 	}
Signature · 1 line
2.34.1
author maintainer
#255 lore raw

PATCH 251/475 pinctrl: mediatek: paris: Fix "argument" argument type for mtk_pinconf_get()

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 19bce7ce0a593c7024030a0cda9e23facea3c93d ]

For mtk_pinconf_get(), the "argument" argument is typically returned by pinconf_to_config_argument(), which holds the value for a given pinconf parameter. It certainly should not have the type of "enum pin_config_param", which describes the type of the pinconf parameter itself.

Change the type to u32, which matches the return type of pinconf_to_config_argument().

Fixes 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/pinctrl/mediatek/pinctrl-paris.c +1 -2
index 923264d0e9ef..e8bfaaccca68 100644
@@ -198,8 +198,7 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 }
 
 static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-			   enum pin_config_param param,
-			   enum pin_config_param arg)
+			   enum pin_config_param param, u32 arg)
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
 	const struct mtk_pin_desc *desc;
Signature · 1 line
2.34.1
author maintainer
#256 lore raw

PATCH 252/475 pinctrl: mediatek: paris: Fix pingroup pin config state readback

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

[ Upstream commit 54fe55fb384ade630ef20b9a8b8f3b2a89ad97f2 ]

mtk_pconf_group_get(), used to read back pingroup pin config state, simply returns a set of configs saved from a previous invocation of mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed in from the pinconf core, which does not match the current hardware state.

Since the driver library is designed to have one pin per group, pass through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the current pin config state of the only pin in the group.

Also drop the assignment of pin config state to the group.

Fixes 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
---
 drivers/pinctrl/mediatek/pinctrl-paris.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/pinctrl/mediatek/pinctrl-paris.c +3 -5
index e8bfaaccca68..31449514a8c0 100644
@@ -646,10 +646,10 @@ static int mtk_pconf_group_get(struct pinctrl_dev *pctldev, unsigned group,
 			       unsigned long *config)
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
+	struct mtk_pinctrl_group *grp = &hw->groups[group];
 
-	*config = hw->groups[group].config;
-
-	return 0;
+	 /* One pin per group only */
+	return mtk_pinconf_get(pctldev, grp->pin, config);
 }
 
 static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
@@ -665,8 +665,6 @@ static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
 				      pinconf_to_config_argument(configs[i]));
 		if (ret < 0)
 			return ret;
-
-		grp->config = configs[i];
 	}
 
 	return 0;
Signature · 1 line
2.34.1
author maintainer
#257 lore raw

PATCH 253/475 pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]

This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.

Fixes 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
---
 drivers/pinctrl/nomadik/pinctrl-nomadik.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/pinctrl/nomadik/pinctrl-nomadik.c +3 -1
index 2a8190b11d10..9f00adfefba8 100644
@@ -1923,8 +1923,10 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
 	}
 
 	prcm_np = of_parse_phandle(np, "prcm", 0);
-	if (prcm_np)
+	if (prcm_np) {
 		npct->prcm_base = of_iomap(prcm_np, 0);
+		of_node_put(prcm_np);
+	}
 	if (!npct->prcm_base) {
 		if (version == PINCTRL_NMK_STN8815) {
 			dev_info(&pdev->dev,
Signature · 1 line
2.34.1
author maintainer
#258 lore raw

PATCH 254/475 pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 89388f8730699c259f8090ec435fb43569efe4ac ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

Fixes 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
---
 drivers/pinctrl/pinctrl-rockchip.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/pinctrl/pinctrl-rockchip.c +2 -0
index 59fe3204e965..4b972be3487f 100644
@@ -3433,6 +3433,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
 	node = of_parse_phandle(np, "rockchip,grf", 0);
 	if (node) {
 		info->regmap_base = syscon_node_to_regmap(node);
+		of_node_put(node);
 		if (IS_ERR(info->regmap_base))
 			return PTR_ERR(info->regmap_base);
 	} else {
@@ -3469,6 +3470,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
 	node = of_parse_phandle(np, "rockchip,pmu", 0);
 	if (node) {
 		info->regmap_pmu = syscon_node_to_regmap(node);
+		of_node_put(node);
 		if (IS_ERR(info->regmap_pmu))
 			return PTR_ERR(info->regmap_pmu);
 	}
Signature · 1 line
2.34.1
author maintainer
#259 lore raw

PATCH 255/475 tty: hvc: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ]

__setup() handlers should return 1 to indicate that the boot option has been handled or 0 to indicate that it was not handled. Add a pr_warn() message if the option value is invalid and then always return 1.

Link lore.kernel.org/r/[email protected]
Fixes 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc Jingoo Han <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Jiri Slaby <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Julian Wiedmann <[email protected]>
Cc Vasily Gorbik <[email protected]>
---
 drivers/tty/hvc/hvc_iucv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/tty/hvc/hvc_iucv.c +3 -1
index 2af1e5751bd6..796fbff623f6 100644
@@ -1470,7 +1470,9 @@ static int __init hvc_iucv_init(void)
  */
 static	int __init hvc_iucv_config(char *val)
 {
-	 return kstrtoul(val, 10, &hvc_iucv_devices);
+	if (kstrtoul(val, 10, &hvc_iucv_devices))
+		pr_warn("hvc_iucv= invalid parameter value '%s'\n", val);
+	return 1;
 }
 
 
Signature · 1 line
2.34.1
author maintainer
#260 lore raw

PATCH 256/475 kgdboc: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. So return 1 from kgdboc_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.

Run /sbin/init as init process
with arguments:
/sbin/init
with environment:

     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=
Link lore.kernel.org/r/[email protected]
Fixes 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc He Zhe <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Jiri Slaby <[email protected]>
Cc Jason Wessel <[email protected]>
Cc Daniel Thompson <[email protected]>
Cc Douglas Anderson <[email protected]>
---
 drivers/tty/serial/kgdboc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/tty/serial/kgdboc.c +3 -3
index f5608ad68ae1..6d4792ec9e5f 100644
@@ -391,16 +391,16 @@ static int kgdboc_option_setup(char *opt)
 {
 	if (!opt) {
 		pr_err("config string not provided\n");
-		return -EINVAL;
+		return 1;
 	}
 
 	if (strlen(opt) >= MAX_CONFIG_LEN) {
 		pr_err("config string too long\n");
-		return -ENOSPC;
+		return 1;
 	}
 	strcpy(config, opt);
 
-	return 0;
+	return 1;
 }
 
 __setup("kgdboc=", kgdboc_option_setup);
Signature · 1 line
2.34.1
author maintainer
#261 lore raw

PATCH 257/475 kgdbts: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 96c9e802c64014a7716865332d732cc9c7f24593 ]

__setup() handlers should return 1 to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. So return 1 from kgdbts_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.

Run /sbin/init as init process
with arguments:
/sbin/init
with environment:

     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=
Link lore.kernel.org/r/[email protected]
Fixes e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc Jason Wessel <[email protected]>
Cc Daniel Thompson <[email protected]>
Cc Douglas Anderson <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
---
 drivers/misc/kgdbts.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/misc/kgdbts.c +2 -2
index 8d18f19c99c4..2f8858105733 100644
@@ -1060,10 +1060,10 @@ static int kgdbts_option_setup(char *opt)
 {
 	if (strlen(opt) >= MAX_CONFIG_LEN) {
 		printk(KERN_ERR "kgdbts: config string too long\n");
-		return -ENOSPC;
+		return 1;
 	}
 	strcpy(config, opt);
-	return 0;
+	return 1;
 }
 
 __setup("kgdbts=", kgdbts_option_setup);
Signature · 1 line
2.34.1
author maintainer
#262 lore raw

PATCH 258/475 firmware: google: Properly state IOMEM dependency

In reply to Greg Kroah-Hartman

From: David Gow <[email protected]>

[ Upstream commit 37fd83916da2e4cae03d350015c82a67b1b334c4 ]

The Google Coreboot implementation requires IOMEM functions (memmremap, memunmap, devm_memremap), but does not specify this is its Kconfig. This results in build errors when HAS_IOMEM is not set, such as on some UML configurations:

/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to memremap' /usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to memunmap' /usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to memremap' /usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to devm_memremap' /usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to memunmap' /usr/bin/ld: drivers/firmware/google/vpd.o: in function vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to memunmap' /usr/bin/ld: drivers/firmware/google/vpd.o: in function vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status

Fixes a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core")
---
 drivers/firmware/google/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/firmware/google/Kconfig +1 -1
index 2fba0aa7fc54..20dfe39a0537 100644
@@ -21,7 +21,7 @@ config GOOGLE_SMI
 
 config GOOGLE_COREBOOT_TABLE
 	tristate "Coreboot Table Access"
-	depends on ACPI || OF
+	depends on HAS_IOMEM && (ACPI || OF)
 	help
 	  This option enables the coreboot_table module, which provides other
 	  firmware modules access to the coreboot table. The coreboot table
Signature · 1 line
2.34.1
author maintainer
#263 lore raw

PATCH 259/475 driver core: dd: fix return value of __setup handler

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit f2aad54703dbe630f9d8b235eb58e8c8cc78f37d ]

When "driver_async_probe=nulltty" is used on the kernel boot command line, it causes an Unknown parameter message and the string is added to init's environment strings, polluting them.

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6 driver_async_probe=nulltty", will be passed to user space.

Run /sbin/init as init process
with arguments:
/sbin/init
with environment:

     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6
     driver_async_probe=nulltty

Change the return value of the __setup function to 1 to indicate that the __setup option has been handled.

Link lore.kernel.org/r/[email protected]
Fixes 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed")
Cc Feng Tang <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
---
 drivers/base/dd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/base/dd.c +1 -1
index cf7e5b4afc1b..26cd4ce3ac75 100644
@@ -747,7 +747,7 @@ static int __init save_async_options(char *buf)
 			"Too long list of driver names for 'driver_async_probe'!\n");
 
 	strlcpy(async_probe_drv_names, buf, ASYNC_DRV_NAMES_MAX_LEN);
-	return 0;
+	return 1;
 }
 __setup("driver_async_probe=", save_async_options);
 
Signature · 1 line
2.34.1
author maintainer
#264 lore raw

PATCH 260/475 jfs: fix divide error in dbNextAG

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit 2cc7cc01c15f57d056318c33705647f87dcd4aab ]

Syzbot reported divide error in dbNextAG(). The problem was in missing validation check for malicious image.

Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any validation checks, but dbNextAG() blindly use bmp->db_numag in divide expression

Fix it by validating bmp->db_numag in dbMount() and return an error if image is malicious

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by [email protected]
---
 fs/jfs/jfs_dmap.c | 7 +++++++
 1 file changed, 7 insertions(+)
fs/jfs/jfs_dmap.c +7 -0
index 6fe82ce8663e..79f3440e204b 100644
@@ -148,6 +148,7 @@ static const s8 budtab[256] = {
  *	0	- success
  *	-ENOMEM	- insufficient memory
  *	-EIO	- i/o error
+ *	-EINVAL - wrong bmap data
  */
 int dbMount(struct inode *ipbmap)
 {
@@ -179,6 +180,12 @@ int dbMount(struct inode *ipbmap)
 	bmp->db_nfree = le64_to_cpu(dbmp_le->dn_nfree);
 	bmp->db_l2nbperpage = le32_to_cpu(dbmp_le->dn_l2nbperpage);
 	bmp->db_numag = le32_to_cpu(dbmp_le->dn_numag);
+	if (!bmp->db_numag) {
+		release_metapage(mp);
+		kfree(bmp);
+		return -EINVAL;
+	}
+
 	bmp->db_maxlevel = le32_to_cpu(dbmp_le->dn_maxlevel);
 	bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag);
 	bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref);
Signature · 1 line
2.34.1
author maintainer
#265 lore raw

PATCH 261/475 netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options

In reply to Greg Kroah-Hartman

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit f2dd495a8d589371289981d5ed33e6873df94ecc ]

Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios coming before the TCP window tracking, otherwise such connections will fail in the window check.

Update tcp_options() to leave this flag in place and add a new helper function to reset the tcp window state.

Based on patch from Sven Auhagen.

Fixes c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
---
 net/netfilter/nf_conntrack_proto_tcp.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)
net/netfilter/nf_conntrack_proto_tcp.c +13 -4
index 848b137151c2..b8cc3339a249 100644
@@ -354,8 +354,8 @@ static void tcp_options(const struct sk_buff *skb,
 				 length, buff);
 	BUG_ON(ptr == NULL);
 
-	state->td_scale =
-	state->flags = 0;
+	state->td_scale = 0;
+	state->flags &= IP_CT_TCP_FLAG_BE_LIBERAL;
 
 	while (length > 0) {
 		int opcode=*ptr++;
@@ -840,6 +840,16 @@ static bool nf_conntrack_tcp_established(const struct nf_conn *ct)
 	       test_bit(IPS_ASSURED_BIT, &ct->status);
 }
 
+static void nf_ct_tcp_state_reset(struct ip_ct_tcp_state *state)
+{
+	state->td_end		= 0;
+	state->td_maxend	= 0;
+	state->td_maxwin	= 0;
+	state->td_maxack	= 0;
+	state->td_scale		= 0;
+	state->flags		&= IP_CT_TCP_FLAG_BE_LIBERAL;
+}
+
 /* Returns verdict for packet, or -1 for invalid. */
 int nf_conntrack_tcp_packet(struct nf_conn *ct,
 			    struct sk_buff *skb,
@@ -946,8 +956,7 @@ int nf_conntrack_tcp_packet(struct nf_conn *ct,
 			ct->proto.tcp.last_flags &= ~IP_CT_EXP_CHALLENGE_ACK;
 			ct->proto.tcp.seen[ct->proto.tcp.last_dir].flags =
 				ct->proto.tcp.last_flags;
-			memset(&ct->proto.tcp.seen[dir], 0,
-			       sizeof(struct ip_ct_tcp_state));
+			nf_ct_tcp_state_reset(&ct->proto.tcp.seen[dir]);
 			break;
 		}
 		ct->proto.tcp.last_index = index;
Signature · 1 line
2.34.1
author maintainer
#266 lore raw

PATCH 262/475 NFSv4.1: dont retry BIND_CONN_TO_SESSION on session error

In reply to Greg Kroah-Hartman

From: Olga Kornievskaia <[email protected]>

[ Upstream commit 1d15d121cc2ad4d016a7dc1493132a9696f91fc5 ]

There is no reason to retry the operation if a session error had occurred in such case result structure isn't filled out.

Fixes dff58530c4ca ("NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION")
---
 fs/nfs/nfs4proc.c | 1 +
 1 file changed, 1 insertion(+)
fs/nfs/nfs4proc.c +1 -0
index fb3d1532f11d..76baf7b441f3 100644
@@ -7918,6 +7918,7 @@ nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata)
 	case -NFS4ERR_DEADSESSION:
 		nfs4_schedule_session_recovery(clp->cl_session,
 				task->tk_status);
+		return;
 	}
 	if (args->dir == NFS4_CDFC4_FORE_OR_BOTH &&
 			res->dir != NFS4_CDFS4_BOTH) {
Signature · 1 line
2.34.1
author maintainer
#267 lore raw

PATCH 263/475 clk: qcom: gcc-msm8994: Fix gpll4 width

In reply to Greg Kroah-Hartman

From: Konrad Dybcio <[email protected]>

[ Upstream commit 71021db1c532c2545ae53b9ee85b37b7154f51d4 ]

The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this.

This fixes the following error messages:

mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz

Fixes aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
---
 drivers/clk/qcom/gcc-msm8994.c | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/qcom/gcc-msm8994.c +1 -0
index b7fc8c7ba195..14f0d5d84080 100644
@@ -107,6 +107,7 @@ static struct clk_alpha_pll gpll4_early = {
 
 static struct clk_alpha_pll_postdiv gpll4 = {
 	.offset = 0x1dc0,
+	.width = 4,
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
 	.clkr.hw.init = &(struct clk_init_data)
 	{
Signature · 1 line
2.34.1
author maintainer
#268 lore raw

PATCH 264/475 clk: Initialize orphan req_rate

In reply to Greg Kroah-Hartman

From: Maxime Ripard <[email protected]>

[ Upstream commit 5f7e2af00807f2117650e711a58b7f0e986ce1df ]

When registering a clock that doesn't have a recalc_rate implementation, and doesn't have its parent registered yet, we initialize the clk_core rate and 'req_rate' fields to 0.

The rate field is later updated when the parent is registered in clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the 'req_rate' field is never updated.

This leads to an issue in clk_set_rate_range() and clk_put(), since those functions will call clk_set_rate() with the content of 'req_rate' to provide drivers with the opportunity to change the rate based on the new boundaries. In this case, we would call clk_set_rate() with a rate of 0, effectively enforcing the minimum allowed for this clock whenever we would call one of those two functions, even though the actual rate might be within range.

Let's fix this by setting 'req_rate' in clk_core_reparent_orphans_nolock() with the rate field content just updated by the call to __clk_recalc_rates().

---
 drivers/clk/clk.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/clk/clk.c +13 -0
index e4e1b4e94a67..ccb26a513b29 100644
@@ -3278,6 +3278,19 @@ static void clk_core_reparent_orphans_nolock(void)
 			__clk_set_parent_after(orphan, parent, NULL);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
+
+			/*
+			 * __clk_init_parent() will set the initial req_rate to
+			 * 0 if the clock doesn't have clk_ops::recalc_rate and
+			 * is an orphan when it's registered.
+			 *
+			 * 'req_rate' is used by clk_set_rate_range() and
+			 * clk_put() to trigger a clk_set_rate() call whenever
+			 * the boundaries are modified. Let's make sure
+			 * 'req_rate' is set to something non-zero so that
+			 * clk_set_rate_range() doesn't drop the frequency.
+			 */
+			orphan->req_rate = orphan->rate;
 		}
 	}
 }
Signature · 1 line
2.34.1
author maintainer
#269 lore raw

PATCH 265/475 xen: fix is_xen_pmu()

In reply to Greg Kroah-Hartman

From: Juergen Gross <[email protected]>

[ Upstream commit de2ae403b4c0e79a3410e63bc448542fbb9f9bfc ]

is_xen_pmu() is taking the cpu number as parameter, but it is not using it. Instead it just tests whether the Xen PMU initialization on the current cpu did succeed. As this test is done by checking a percpu pointer, preemption needs to be disabled in order to avoid switching the cpu while doing the test. While resuming from suspend() this seems not to be the case:

[   88.082751] ACPI: PM: Low-level resume complete
[   88.087933] ACPI: EC: EC started
[   88.091464] ACPI: PM: Restoring platform NVS memory
[   88.097166] xen_acpi_processor: Uploading Xen processor PM info
[   88.103850] Enabling non-boot CPUs ...
[   88.108128] installing Xen timer for CPU 1
[   88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[   88.122256] caller is is_xen_pmu+0x12/0x30
[   88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G        W         5.16.13-2.fc32.qubes.x86_64 #1
[   88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[   88.145930] Call Trace:
[   88.148757]  <TASK>
[   88.151193]  dump_stack_lvl+0x48/0x5e
[   88.155381]  check_preemption_disabled+0xde/0xe0
[   88.160641]  is_xen_pmu+0x12/0x30
[   88.164441]  xen_smp_intr_init_pv+0x75/0x100

Fix that by replacing is_xen_pmu() by a simple boolean variable which reflects the Xen PMU initialization state on cpu 0.

Modify xen_pmu_init() to return early in case it is being called for a cpu other than cpu 0 and the boolean variable not being set.

---
 arch/x86/xen/pmu.c    | 10 ++++------
 arch/x86/xen/pmu.h    |  3 ++-
 arch/x86/xen/smp_pv.c |  2 +-
 3 files changed, 7 insertions(+), 8 deletions(-)
arch/x86/xen/pmu.c +4 -6
index e13b0b49fcdf..d7249f4c90f1 100644
@@ -512,10 +512,7 @@ irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id)
 	return ret;
 }
 
-bool is_xen_pmu(int cpu)
-{
-	return (get_xenpmu_data() != NULL);
-}
+bool is_xen_pmu;
 
 void xen_pmu_init(int cpu)
 {
@@ -526,7 +523,7 @@ void xen_pmu_init(int cpu)
 
 	BUILD_BUG_ON(sizeof(struct xen_pmu_data) > PAGE_SIZE);
 
-	if (xen_hvm_domain())
+	if (xen_hvm_domain() || (cpu != 0 && !is_xen_pmu))
 		return;
 
 	xenpmu_data = (struct xen_pmu_data *)get_zeroed_page(GFP_KERNEL);
@@ -547,7 +544,8 @@ void xen_pmu_init(int cpu)
 	per_cpu(xenpmu_shared, cpu).xenpmu_data = xenpmu_data;
 	per_cpu(xenpmu_shared, cpu).flags = 0;
 
-	if (cpu == 0) {
+	if (!is_xen_pmu) {
+		is_xen_pmu = true;
 		perf_register_guest_info_callbacks(&xen_guest_cbs);
 		xen_pmu_arch_init();
 	}
arch/x86/xen/pmu.h +2 -1
index 0e83a160589b..65c58894fc79 100644
@@ -4,6 +4,8 @@
 
 #include <xen/interface/xenpmu.h>
 
+extern bool is_xen_pmu;
+
 irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id);
 #ifdef CONFIG_XEN_HAVE_VPMU
 void xen_pmu_init(int cpu);
@@ -12,7 +14,6 @@ void xen_pmu_finish(int cpu);
 static inline void xen_pmu_init(int cpu) {}
 static inline void xen_pmu_finish(int cpu) {}
 #endif
-bool is_xen_pmu(int cpu);
 bool pmu_msr_read(unsigned int msr, uint64_t *val, int *err);
 bool pmu_msr_write(unsigned int msr, uint32_t low, uint32_t high, int *err);
 int pmu_apic_update(uint32_t reg);
arch/x86/xen/smp_pv.c +1 -1
index 0cebe5db691d..64e6ec2c32a7 100644
@@ -129,7 +129,7 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 	per_cpu(xen_irq_work, cpu).irq = rc;
 	per_cpu(xen_irq_work, cpu).name = callfunc_name;
 
-	if (is_xen_pmu(cpu)) {
+	if (is_xen_pmu) {
 		pmu_name = kasprintf(GFP_KERNEL, "pmu%d", cpu);
 		rc = bind_virq_to_irqhandler(VIRQ_XENPMU, cpu,
 					     xen_pmu_irq_handler,
Signature · 1 line
2.34.1
author maintainer
#270 lore raw

PATCH 266/475 net: phy: broadcom: Fix brcm_fet_config_init()

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ]

A Broadcom AC201 PHY (same entry as 5241) would be flagged by the Broadcom UniMAC MDIO controller as not completing the turn around properly since the PHY expects 65 MDC clock cycles to complete a write cycle, and the MDIO controller was only sending 64 MDC clock cycles as determined by looking at a scope shot.

This would make the subsequent read fail with the UniMAC MDIO controller command field having MDIO_READ_FAIL set and we would abort the brcm_fet_config_init() function and thus not probe the PHY at all.

After issuing a software reset, wait for at least 1ms which is well above the 1us reset delay advertised by the datasheet and issue a dummy read to let the PHY turn around the line properly. This read specifically ignores -EIO which would be returned by MDIO controllers checking for the line being turned around.

If we have a genuine reaad failure, the next read of the interrupt status register would pick it up anyway.

---
 drivers/net/phy/broadcom.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/net/phy/broadcom.c +21 -0
index c23fec34b50e..7be75a611e9e 100644
@@ -11,6 +11,7 @@
  */
 
 #include "bcm-phy-lib.h"
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/brcmphy.h>
@@ -479,6 +480,26 @@ static int brcm_fet_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	/* The datasheet indicates the PHY needs up to 1us to complete a reset,
+	 * build some slack here.
+	 */
+	usleep_range(1000, 2000);
+
+	/* The PHY requires 65 MDC clock cycles to complete a write operation
+	 * and turnaround the line properly.
+	 *
+	 * We ignore -EIO here as the MDIO controller (e.g.: mdio-bcm-unimac)
+	 * may flag the lack of turn-around as a read failure. This is
+	 * particularly true with this combination since the MDIO controller
+	 * only used 64 MDC cycles. This is not a critical failure in this
+	 * specific case and it has no functional impact otherwise, so we let
+	 * that one go through. If there is a genuine bus error, the next read
+	 * of MII_BRCM_FET_INTREG will error out.
+	 */
+	err = phy_read(phydev, MII_BMCR);
+	if (err < 0 && err != -EIO)
+		return err;
+
 	reg = phy_read(phydev, MII_BRCM_FET_INTREG);
 	if (reg < 0)
 		return reg;
Signature · 1 line
2.34.1
author maintainer
#271 lore raw

PATCH 267/475 selftests: test_vxlan_under_vrf: Fix broken test case

In reply to Greg Kroah-Hartman

From: Ido Schimmel <[email protected]>

[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ]

The purpose of the last test case is to test VXLAN encapsulation and decapsulation when the underlay lookup takes place in a non-default VRF. This is achieved by enslaving the physical device of the tunnel to a VRF.

The binding of the VXLAN UDP socket to the VRF happens when the VXLAN device itself is opened, not when its physical device is opened. This was also mentioned in the cited commit ("tests that moving the underlay from a VRF to another works when down/up the VXLAN interface"), but the test did something else.

Fix it by reopening the VXLAN device instead of its physical device.

Before:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [FAIL]

After:

 # ./test_vxlan_under_vrf.sh
 Checking HV connectivity                                           [ OK ]
 Check VM connectivity through VXLAN (underlay in the default VRF)  [ OK ]
 Check VM connectivity through VXLAN (underlay in a VRF)            [ OK ]
Fixes 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF")
---
 tools/testing/selftests/net/test_vxlan_under_vrf.sh | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
tools/testing/selftests/net/test_vxlan_under_vrf.sh +4 -4
index 09f9ed92cbe4..a44b9aca7427 100755
@@ -118,11 +118,11 @@ echo "[ OK ]"
 
 # Move the underlay to a non-default VRF
 ip -netns hv-1 link set veth0 vrf vrf-underlay
-ip -netns hv-1 link set veth0 down
-ip -netns hv-1 link set veth0 up
+ip -netns hv-1 link set vxlan0 down
+ip -netns hv-1 link set vxlan0 up
 ip -netns hv-2 link set veth0 vrf vrf-underlay
-ip -netns hv-2 link set veth0 down
-ip -netns hv-2 link set veth0 up
+ip -netns hv-2 link set vxlan0 down
+ip -netns hv-2 link set vxlan0 up
 
 echo -n "Check VM connectivity through VXLAN (underlay in a VRF)            "
 ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false)
Signature · 1 line
2.34.1
author maintainer
#272 lore raw

PATCH 268/475 qlcnic: dcb: default to returning -EOPNOTSUPP

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 1521db37f0d42334a88e8ff28198a27d1ed5cd7b ]

Clang static analysis reports this issue
qlcnic_dcb.c:382:10: warning: Assigned value is
garbage or undefined

  mbx_out = *val;
          ^ ~~~~

val is set in the qlcnic_dcb_query_hw_capability() wrapper. If there is no query_hw_capability op in dcp, success is returned without setting the val.

For this and similar wrappers, return -EOPNOTSUPP.

Fixes 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.")
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h +5 -5
index f4aa6331b367..0a9d24e86715 100644
@@ -52,7 +52,7 @@ static inline int qlcnic_dcb_get_hw_capability(struct qlcnic_dcb *dcb)
 	if (dcb && dcb->ops->get_hw_capability)
 		return dcb->ops->get_hw_capability(dcb);
 
-	return 0;
+	return -EOPNOTSUPP;
 }
 
 static inline void qlcnic_dcb_free(struct qlcnic_dcb *dcb)
@@ -66,7 +66,7 @@ static inline int qlcnic_dcb_attach(struct qlcnic_dcb *dcb)
 	if (dcb && dcb->ops->attach)
 		return dcb->ops->attach(dcb);
 
-	return 0;
+	return -EOPNOTSUPP;
 }
 
 static inline int
@@ -75,7 +75,7 @@ qlcnic_dcb_query_hw_capability(struct qlcnic_dcb *dcb, char *buf)
 	if (dcb && dcb->ops->query_hw_capability)
 		return dcb->ops->query_hw_capability(dcb, buf);
 
-	return 0;
+	return -EOPNOTSUPP;
 }
 
 static inline void qlcnic_dcb_get_info(struct qlcnic_dcb *dcb)
@@ -90,7 +90,7 @@ qlcnic_dcb_query_cee_param(struct qlcnic_dcb *dcb, char *buf, u8 type)
 	if (dcb && dcb->ops->query_cee_param)
 		return dcb->ops->query_cee_param(dcb, buf, type);
 
-	return 0;
+	return -EOPNOTSUPP;
 }
 
 static inline int qlcnic_dcb_get_cee_cfg(struct qlcnic_dcb *dcb)
@@ -98,7 +98,7 @@ static inline int qlcnic_dcb_get_cee_cfg(struct qlcnic_dcb *dcb)
 	if (dcb && dcb->ops->get_cee_cfg)
 		return dcb->ops->get_cee_cfg(dcb);
 
-	return 0;
+	return -EOPNOTSUPP;
 }
 
 static inline void qlcnic_dcb_aen_handler(struct qlcnic_dcb *dcb, void *msg)
Signature · 1 line
2.34.1
author maintainer
#273 lore raw

PATCH 269/475 net/x25: Fix null-ptr-deref caused by x25_disconnect

In reply to Greg Kroah-Hartman

From: Duoming Zhou <[email protected]>

[ Upstream commit 7781607938c8371d4c2b243527430241c62e39c2 ]

When the link layer is terminating, x25->neighbour will be set to NULL in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is shown below.

    (Thread 1)                 |  (Thread 2)
x25_link_terminated()          | x25_recvmsg()
 x25_kill_by_neigh()           |  ...
  x25_disconnect()             |  lock_sock(sk)
   ...                         |  ...
   x25->neighbour = NULL //(1) |
   ...                         |  x25->neighbour->extended //(2)

The code sets NULL to x25->neighbour in position (1) and dereferences x25->neighbour in position (2), which could cause null-ptr-deref bug.

This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the sock held by lock_sock() is not NULL, because it is extracted from x25_list and uses x25_list_lock to synchronize.

Fixes 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
---
 net/x25/af_x25.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
net/x25/af_x25.c +8 -3
index d8d603aa4887..c94aa587e0c9 100644
@@ -1767,10 +1767,15 @@ void x25_kill_by_neigh(struct x25_neigh *nb)
 
 	write_lock_bh(&x25_list_lock);
 
-	sk_for_each(s, &x25_list)
-		if (x25_sk(s)->neighbour == nb)
+	sk_for_each(s, &x25_list) {
+		if (x25_sk(s)->neighbour == nb) {
+			write_unlock_bh(&x25_list_lock);
+			lock_sock(s);
 			x25_disconnect(s, ENETUNREACH, 0, 0);
-
+			release_sock(s);
+			write_lock_bh(&x25_list_lock);
+		}
+	}
 	write_unlock_bh(&x25_list_lock);
 
 	/* Remove any related forwards */
Signature · 1 line
2.34.1
author maintainer
#274 lore raw

PATCH 270/475 NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 7c9d845f0612e5bcd23456a2ec43be8ac43458f1 ]

In nfs4_callback_devicenotify(), if we don't find a matching entry for the deviceid, we're left with a pointer to 'struct nfs_server' that actually points to the list of super blocks associated with our struct nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super block, and so the struct nfs_server could end up getting freed while we're using it.

Since all we want is a pointer to the struct pnfs_layoutdriver_type, let's skip all the iteration over super blocks, and just use APIs to find the layout driver directly.

Fixes 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
---
 fs/nfs/callback_proc.c | 27 +++++++++------------------
 fs/nfs/pnfs.c          | 11 +++++++++++
 fs/nfs/pnfs.h          |  2 ++
 3 files changed, 22 insertions(+), 18 deletions(-)
fs/nfs/callback_proc.c +9 -18
index b8a7b223b5b1..31922657e836 100644
@@ -364,12 +364,11 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
 				  struct cb_process_state *cps)
 {
 	struct cb_devicenotifyargs *args = argp;
+	const struct pnfs_layoutdriver_type *ld = NULL;
 	uint32_t i;
 	__be32 res = 0;
-	struct nfs_client *clp = cps->clp;
-	struct nfs_server *server = NULL;
 
-	if (!clp) {
+	if (!cps->clp) {
 		res = cpu_to_be32(NFS4ERR_OP_NOT_IN_SESSION);
 		goto out;
 	}
@@ -377,23 +376,15 @@ __be32 nfs4_callback_devicenotify(void *argp, void *resp,
 	for (i = 0; i < args->ndevs; i++) {
 		struct cb_devicenotifyitem *dev = &args->devs[i];
 
-		if (!server ||
-		    server->pnfs_curr_ld->id != dev->cbd_layout_type) {
-			rcu_read_lock();
-			list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link)
-				if (server->pnfs_curr_ld &&
-				    server->pnfs_curr_ld->id == dev->cbd_layout_type) {
-					rcu_read_unlock();
-					goto found;
-				}
-			rcu_read_unlock();
-			continue;
+		if (!ld || ld->id != dev->cbd_layout_type) {
+			pnfs_put_layoutdriver(ld);
+			ld = pnfs_find_layoutdriver(dev->cbd_layout_type);
+			if (!ld)
+				continue;
 		}
-
-	found:
-		nfs4_delete_deviceid(server->pnfs_curr_ld, clp, &dev->cbd_dev_id);
+		nfs4_delete_deviceid(ld, cps->clp, &dev->cbd_dev_id);
 	}
-
+	pnfs_put_layoutdriver(ld);
 out:
 	kfree(args->devs);
 	return res;
fs/nfs/pnfs.c +11 -0
index 1b512df1003f..0471b6e0da16 100644
@@ -92,6 +92,17 @@ find_pnfs_driver(u32 id)
 	return local;
 }
 
+const struct pnfs_layoutdriver_type *pnfs_find_layoutdriver(u32 id)
+{
+	return find_pnfs_driver(id);
+}
+
+void pnfs_put_layoutdriver(const struct pnfs_layoutdriver_type *ld)
+{
+	if (ld)
+		module_put(ld->owner);
+}
+
 void
 unset_pnfs_layoutdriver(struct nfs_server *nfss)
 {
fs/nfs/pnfs.h +2 -0
index 3d55edd6b25a..68339680bb7d 100644
@@ -226,6 +226,8 @@ struct pnfs_devicelist {
 
 extern int pnfs_register_layoutdriver(struct pnfs_layoutdriver_type *);
 extern void pnfs_unregister_layoutdriver(struct pnfs_layoutdriver_type *);
+extern const struct pnfs_layoutdriver_type *pnfs_find_layoutdriver(u32 id);
+extern void pnfs_put_layoutdriver(const struct pnfs_layoutdriver_type *ld);
 
 /* nfs4proc.c */
 extern size_t max_response_pages(struct nfs_server *server);
Signature · 1 line
2.34.1
author maintainer
#275 lore raw

PATCH 271/475 net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator

In reply to Greg Kroah-Hartman

From: Xiaomeng Tong <[email protected]>

[ Upstream commit 6da69b1da130e7d96766042750cd9f902e890eba ]

The bug is here:

	return rule;

The list iterator value 'rule' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found.

To fix the bug, return 'rule' when found, otherwise return NULL.

---
 drivers/net/dsa/bcm_sf2_cfp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/dsa/bcm_sf2_cfp.c +3 -3
index e15d18bb981e..5cc31118b97e 100644
@@ -542,14 +542,14 @@ static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
 static struct cfp_rule *bcm_sf2_cfp_rule_find(struct bcm_sf2_priv *priv,
 					      int port, u32 location)
 {
-	struct cfp_rule *rule = NULL;
+	struct cfp_rule *rule;
 
 	list_for_each_entry(rule, &priv->cfp.rules_list, next) {
 		if (rule->port == port && rule->fs.location == location)
-			break;
+			return rule;
 	}
 
-	return rule;
+	return NULL;
 }
 
 static int bcm_sf2_cfp_rule_cmp(struct bcm_sf2_priv *priv, int port,
Signature · 1 line
2.34.1
author maintainer
#276 lore raw

PATCH 272/475 lib/test: use after free in register_test_dev_kmod()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ]

The "test_dev" pointer is freed but then returned to the caller.

Fixes d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
---
 lib/test_kmod.c | 1 +
 1 file changed, 1 insertion(+)
lib/test_kmod.c +1 -0
index 87a0cc750ea2..6813b183aa34 100644
@@ -1155,6 +1155,7 @@ static struct kmod_test_device *register_test_dev_kmod(void)
 	if (ret) {
 		pr_err("could not register misc device: %d\n", ret);
 		free_test_dev_kmod(test_dev);
+		test_dev = NULL;
 		goto out;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#277 lore raw

PATCH 273/475 LSM: general protection fault in legacy_parse_param

In reply to Greg Kroah-Hartman

From: Casey Schaufler <[email protected]>

[ Upstream commit ecff30575b5ad0eda149aadad247b7f75411fd47 ]

The usual LSM hook "bail on fail" scheme doesn't work for cases where a security module may return an error code indicating that it does not recognize an input. In this particular case Smack sees a mount option that it recognizes, and returns 0. A call to a BPF hook follows, which returns -ENOPARAM, which confuses the caller because Smack has processed its data.

The SELinux hook incorrectly returns 1 on success. There was a time when this was correct, however the current expectation is that it return 0 on success. This is repaired.

---
 security/security.c      | 17 +++++++++++++++--
 security/selinux/hooks.c |  5 ++---
 2 files changed, 17 insertions(+), 5 deletions(-)
security/security.c +15 -2
index c34ec4c7d98c..f633717311a3 100644
@@ -802,9 +802,22 @@ int security_fs_context_dup(struct fs_context *fc, struct fs_context *src_fc)
 	return call_int_hook(fs_context_dup, 0, fc, src_fc);
 }
 
-int security_fs_context_parse_param(struct fs_context *fc, struct fs_parameter *param)
+int security_fs_context_parse_param(struct fs_context *fc,
+				    struct fs_parameter *param)
 {
-	return call_int_hook(fs_context_parse_param, -ENOPARAM, fc, param);
+	struct security_hook_list *hp;
+	int trc;
+	int rc = -ENOPARAM;
+
+	hlist_for_each_entry(hp, &security_hook_heads.fs_context_parse_param,
+			     list) {
+		trc = hp->hook.fs_context_parse_param(fc, param);
+		if (trc == 0)
+			rc = 0;
+		else if (trc != -ENOPARAM)
+			return trc;
+	}
+	return rc;
 }
 
 int security_sb_alloc(struct super_block *sb)
security/selinux/hooks.c +2 -3
index 56418cf72069..d9f15c84aab7 100644
@@ -2855,10 +2855,9 @@ static int selinux_fs_context_parse_param(struct fs_context *fc,
 		return opt;
 
 	rc = selinux_add_opt(opt, param->string, &fc->security);
-	if (!rc) {
+	if (!rc)
 		param->string = NULL;
-		rc = 1;
-	}
+
 	return rc;
 }
 
Signature · 1 line
2.34.1
author maintainer
#278 lore raw

PATCH 274/475 gcc-plugins/stackleak: Exactly match strings instead of prefixes

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

[ Upstream commit 27e9faf415dbf94af19b9c827842435edbc1fbbc ]

Since STRING_CST may not be NUL terminated, strncmp() was used for check for equality. However, this may lead to mismatches for longer section names where the start matches the tested-for string. Test for exact equality by checking for the presences of NUL termination.

---
 scripts/gcc-plugins/stackleak_plugin.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)
scripts/gcc-plugins/stackleak_plugin.c +21 -4
index dbd37460c573..f46abb315010 100644
@@ -262,6 +262,23 @@ static unsigned int stackleak_cleanup_execute(void)
 	return 0;
 }
 
+/*
+ * STRING_CST may or may not be NUL terminated:
+ * https://gcc.gnu.org/onlinedocs/gccint/Constant-expressions.html
+ */
+static inline bool string_equal(tree node, const char *string, int length)
+{
+	if (TREE_STRING_LENGTH(node) < length)
+		return false;
+	if (TREE_STRING_LENGTH(node) > length + 1)
+		return false;
+	if (TREE_STRING_LENGTH(node) == length + 1 &&
+	    TREE_STRING_POINTER(node)[length] != '\0')
+		return false;
+	return !memcmp(TREE_STRING_POINTER(node), string, length);
+}
+#define STRING_EQUAL(node, str)	string_equal(node, str, strlen(str))
+
 static bool stackleak_gate(void)
 {
 	tree section;
@@ -271,13 +288,13 @@ static bool stackleak_gate(void)
 	if (section && TREE_VALUE(section)) {
 		section = TREE_VALUE(TREE_VALUE(section));
 
-		if (!strncmp(TREE_STRING_POINTER(section), ".init.text", 10))
+		if (STRING_EQUAL(section, ".init.text"))
 			return false;
-		if (!strncmp(TREE_STRING_POINTER(section), ".devinit.text", 13))
+		if (STRING_EQUAL(section, ".devinit.text"))
 			return false;
-		if (!strncmp(TREE_STRING_POINTER(section), ".cpuinit.text", 13))
+		if (STRING_EQUAL(section, ".cpuinit.text"))
 			return false;
-		if (!strncmp(TREE_STRING_POINTER(section), ".meminit.text", 13))
+		if (STRING_EQUAL(section, ".meminit.text"))
 			return false;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#279 lore raw

PATCH 275/475 pinctrl: npcm: Fix broken references to chip->parent_device

In reply to Greg Kroah-Hartman

From: Marc Zyngier <[email protected]>

[ Upstream commit f7e53e2255808ca3abcc8f38d18ad0823425e771 ]

The npcm driver has a bunch of references to the irq_chip parent_device field, but never sets it.

Fix it by fishing that reference from somewhere else, but it is obvious that these debug statements were never used. Also remove an unused field in a local data structure.

---
 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 25 +++++++++++------------
 1 file changed, 12 insertions(+), 13 deletions(-)
drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c +12 -13
index 17f909d8b63a..e7dc97e099f2 100644
@@ -78,7 +78,6 @@ struct npcm7xx_gpio {
 	struct gpio_chip	gc;
 	int			irqbase;
 	int			irq;
-	void			*priv;
 	struct irq_chip		irq_chip;
 	u32			pinctrl_id;
 	int (*direction_input)(struct gpio_chip *chip, unsigned offset);
@@ -226,7 +225,7 @@ static void npcmgpio_irq_handler(struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 	sts = ioread32(bank->base + NPCM7XX_GP_N_EVST);
 	en  = ioread32(bank->base + NPCM7XX_GP_N_EVEN);
-	dev_dbg(chip->parent_device, "==> got irq sts %.8x %.8x\n", sts,
+	dev_dbg(bank->gc.parent, "==> got irq sts %.8x %.8x\n", sts,
 		en);
 
 	sts &= en;
@@ -241,33 +240,33 @@ static int npcmgpio_set_irq_type(struct irq_data *d, unsigned int type)
 		gpiochip_get_data(irq_data_get_irq_chip_data(d));
 	unsigned int gpio = BIT(d->hwirq);
 
-	dev_dbg(d->chip->parent_device, "setirqtype: %u.%u = %u\n", gpio,
+	dev_dbg(bank->gc.parent, "setirqtype: %u.%u = %u\n", gpio,
 		d->irq, type);
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
-		dev_dbg(d->chip->parent_device, "edge.rising\n");
+		dev_dbg(bank->gc.parent, "edge.rising\n");
 		npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
 		npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
-		dev_dbg(d->chip->parent_device, "edge.falling\n");
+		dev_dbg(bank->gc.parent, "edge.falling\n");
 		npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
 		npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
 		break;
 	case IRQ_TYPE_EDGE_BOTH:
-		dev_dbg(d->chip->parent_device, "edge.both\n");
+		dev_dbg(bank->gc.parent, "edge.both\n");
 		npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_EVBE, gpio);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
-		dev_dbg(d->chip->parent_device, "level.low\n");
+		dev_dbg(bank->gc.parent, "level.low\n");
 		npcm_gpio_set(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
-		dev_dbg(d->chip->parent_device, "level.high\n");
+		dev_dbg(bank->gc.parent, "level.high\n");
 		npcm_gpio_clr(&bank->gc, bank->base + NPCM7XX_GP_N_POL, gpio);
 		break;
 	default:
-		dev_dbg(d->chip->parent_device, "invalid irq type\n");
+		dev_dbg(bank->gc.parent, "invalid irq type\n");
 		return -EINVAL;
 	}
 
@@ -289,7 +288,7 @@ static void npcmgpio_irq_ack(struct irq_data *d)
 		gpiochip_get_data(irq_data_get_irq_chip_data(d));
 	unsigned int gpio = d->hwirq;
 
-	dev_dbg(d->chip->parent_device, "irq_ack: %u.%u\n", gpio, d->irq);
+	dev_dbg(bank->gc.parent, "irq_ack: %u.%u\n", gpio, d->irq);
 	iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVST);
 }
 
@@ -301,7 +300,7 @@ static void npcmgpio_irq_mask(struct irq_data *d)
 	unsigned int gpio = d->hwirq;
 
 	/* Clear events */
-	dev_dbg(d->chip->parent_device, "irq_mask: %u.%u\n", gpio, d->irq);
+	dev_dbg(bank->gc.parent, "irq_mask: %u.%u\n", gpio, d->irq);
 	iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVENC);
 }
 
@@ -313,7 +312,7 @@ static void npcmgpio_irq_unmask(struct irq_data *d)
 	unsigned int gpio = d->hwirq;
 
 	/* Enable events */
-	dev_dbg(d->chip->parent_device, "irq_unmask: %u.%u\n", gpio, d->irq);
+	dev_dbg(bank->gc.parent, "irq_unmask: %u.%u\n", gpio, d->irq);
 	iowrite32(BIT(gpio), bank->base + NPCM7XX_GP_N_EVENS);
 }
 
@@ -323,7 +322,7 @@ static unsigned int npcmgpio_irq_startup(struct irq_data *d)
 	unsigned int gpio = d->hwirq;
 
 	/* active-high, input, clear interrupt, enable interrupt */
-	dev_dbg(d->chip->parent_device, "startup: %u.%u\n", gpio, d->irq);
+	dev_dbg(gc->parent, "startup: %u.%u\n", gpio, d->irq);
 	npcmgpio_direction_input(gc, gpio);
 	npcmgpio_irq_ack(d);
 	npcmgpio_irq_unmask(d);
Signature · 1 line
2.34.1
author maintainer
#280 lore raw

PATCH 276/475 block, bfq: dont move oom_bfqq

In reply to Greg Kroah-Hartman

From: Yu Kuai <[email protected]>

[ Upstream commit 8410f70977734f21b8ed45c37e925d311dfda2e7 ]

Our test report a UAF:

[ 2073.019181] ==================================================================
[ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584
[ 2073.019192]
[ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5
[ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2073.019200] Call trace:
[ 2073.019203]  dump_backtrace+0x0/0x310
[ 2073.019206]  show_stack+0x28/0x38
[ 2073.019210]  dump_stack+0xec/0x15c
[ 2073.019216]  print_address_description+0x68/0x2d0
[ 2073.019220]  kasan_report+0x238/0x2f0
[ 2073.019224]  __asan_store8+0x88/0xb0
[ 2073.019229]  __bfq_put_async_bfqq+0xa0/0x168
[ 2073.019233]  bfq_put_async_queues+0xbc/0x208
[ 2073.019236]  bfq_pd_offline+0x178/0x238
[ 2073.019240]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019244]  bfq_exit_queue+0x128/0x178
[ 2073.019249]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019252]  elevator_exit+0xc8/0xd0
[ 2073.019256]  blk_exit_queue+0x50/0x88
[ 2073.019259]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019267]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019274]  null_exit+0x90/0x114 [null_blk]
[ 2073.019278]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019282]  el0_svc_common+0xc8/0x320
[ 2073.019287]  el0_svc_handler+0xf8/0x160
[ 2073.019290]  el0_svc+0x10/0x218
[ 2073.019291]
[ 2073.019294] Allocated by task 14163:
[ 2073.019301]  kasan_kmalloc+0xe0/0x190
[ 2073.019305]  kmem_cache_alloc_node_trace+0x1cc/0x418
[ 2073.019308]  bfq_pd_alloc+0x54/0x118
[ 2073.019313]  blkcg_activate_policy+0x250/0x460
[ 2073.019317]  bfq_create_group_hierarchy+0x38/0x110
[ 2073.019321]  bfq_init_queue+0x6d0/0x948
[ 2073.019325]  blk_mq_init_sched+0x1d8/0x390
[ 2073.019330]  elevator_switch_mq+0x88/0x170
[ 2073.019334]  elevator_switch+0x140/0x270
[ 2073.019338]  elv_iosched_store+0x1a4/0x2a0
[ 2073.019342]  queue_attr_store+0x90/0xe0
[ 2073.019348]  sysfs_kf_write+0xa8/0xe8
[ 2073.019351]  kernfs_fop_write+0x1f8/0x378
[ 2073.019359]  __vfs_write+0xe0/0x360
[ 2073.019363]  vfs_write+0xf0/0x270
[ 2073.019367]  ksys_write+0xdc/0x1b8
[ 2073.019371]  __arm64_sys_write+0x50/0x60
[ 2073.019375]  el0_svc_common+0xc8/0x320
[ 2073.019380]  el0_svc_handler+0xf8/0x160
[ 2073.019383]  el0_svc+0x10/0x218
[ 2073.019385]
[ 2073.019387] Freed by task 72584:
[ 2073.019391]  __kasan_slab_free+0x120/0x228
[ 2073.019394]  kasan_slab_free+0x10/0x18
[ 2073.019397]  kfree+0x94/0x368
[ 2073.019400]  bfqg_put+0x64/0xb0
[ 2073.019404]  bfqg_and_blkg_put+0x90/0xb0
[ 2073.019408]  bfq_put_queue+0x220/0x228
[ 2073.019413]  __bfq_put_async_bfqq+0x98/0x168
[ 2073.019416]  bfq_put_async_queues+0xbc/0x208
[ 2073.019420]  bfq_pd_offline+0x178/0x238
[ 2073.019424]  blkcg_deactivate_policy+0x1f0/0x420
[ 2073.019429]  bfq_exit_queue+0x128/0x178
[ 2073.019433]  blk_mq_exit_sched+0x12c/0x160
[ 2073.019437]  elevator_exit+0xc8/0xd0
[ 2073.019440]  blk_exit_queue+0x50/0x88
[ 2073.019443]  blk_cleanup_queue+0x228/0x3d8
[ 2073.019451]  null_del_dev+0xfc/0x1e0 [null_blk]
[ 2073.019459]  null_exit+0x90/0x114 [null_blk]
[ 2073.019462]  __arm64_sys_delete_module+0x358/0x5a0
[ 2073.019467]  el0_svc_common+0xc8/0x320
[ 2073.019471]  el0_svc_handler+0xf8/0x160
[ 2073.019474]  el0_svc+0x10/0x218
[ 2073.019475]
[ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00
 which belongs to the cache kmalloc-1024 of size 1024
[ 2073.019484] The buggy address is located 552 bytes inside of
 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300)
[ 2073.019486] The buggy address belongs to the page:
[ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0
[ 2073.020123] flags: 0x7ffff0000008100(slab|head)
[ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00
[ 2073.020409] raw: 0000000000000000 00000000001c001c 00000001ffffffff 0000000000000000
[ 2073.020411] page dumped because: kasan: bad access detected
[ 2073.020412]
[ 2073.020414] Memory state around the buggy address:
[ 2073.020420]  ffff8000ccf64000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020424]  ffff8000ccf64080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020428] >ffff8000ccf64100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020430]                                   ^
[ 2073.020434]  ffff8000ccf64180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020438]  ffff8000ccf64200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 2073.020439] ==================================================================

The same problem exist in mainline as well.

This is because oom_bfqq is moved to a non-root group, thus root_group is freed earlier.

Thus fix the problem by don't move oom_bfqq.

---
 block/bfq-cgroup.c | 6 ++++++
 1 file changed, 6 insertions(+)
block/bfq-cgroup.c +6 -0
index 342a1cfa48c5..c17eb794f0ae 100644
@@ -625,6 +625,12 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 {
 	struct bfq_entity *entity = &bfqq->entity;
 
+	/*
+	 * oom_bfqq is not allowed to move, oom_bfqq will hold ref to root_group
+	 * until elevator exit.
+	 */
+	if (bfqq == &bfqd->oom_bfqq)
+		return;
 	/*
 	 * Get extra reference to prevent bfqq from being freed in
 	 * next possible expire or deactivate.
Signature · 1 line
2.34.1
author maintainer
#281 lore raw

PATCH 277/475 selinux: use correct type for context length

In reply to Greg Kroah-Hartman

From: Christian Göttsche <[email protected]>

[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]

security_sid_to_context() expects a pointer to an u32 as the address where to store the length of the computed context.

Reported by sparse:

security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
(different signedness)
security/selinux/xfrm.c:359:39: expected unsigned int
[usertype] *scontext_len
security/selinux/xfrm.c:359:39: got int *

[PM: wrapped commit description]
---
 security/selinux/xfrm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
security/selinux/xfrm.c +1 -1
index 7314196185d1..00e95f8bd7c7 100644
@@ -346,7 +346,7 @@ int selinux_xfrm_state_alloc_acquire(struct xfrm_state *x,
 	int rc;
 	struct xfrm_sec_ctx *ctx;
 	char *ctx_str = NULL;
-	int str_len;
+	u32 str_len;
 
 	if (!polsec)
 		return 0;
Signature · 1 line
2.34.1
author maintainer
#282 lore raw

PATCH 278/475 loop: use sysfs_emit() in the sysfs xxx show()

In reply to Greg Kroah-Hartman

From: Chaitanya Kulkarni <[email protected]>

[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer used for outputting sysfs content and it's possible to overrun the PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the temporary buffer and ensures that no overrun is done for offset attribute in loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

---
 drivers/block/loop.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/block/loop.c +5 -5
index ffbe792410d1..6b3e27b8cd24 100644
@@ -794,33 +794,33 @@ static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf)
 
 static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf)
 {
-	return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset);
+	return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset);
 }
 
 static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf)
 {
-	return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
+	return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit);
 }
 
 static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf)
 {
 	int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR);
 
-	return sprintf(buf, "%s\n", autoclear ? "1" : "0");
+	return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0");
 }
 
 static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf)
 {
 	int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN);
 
-	return sprintf(buf, "%s\n", partscan ? "1" : "0");
+	return sysfs_emit(buf, "%s\n", partscan ? "1" : "0");
 }
 
 static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf)
 {
 	int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO);
 
-	return sprintf(buf, "%s\n", dio ? "1" : "0");
+	return sysfs_emit(buf, "%s\n", dio ? "1" : "0");
 }
 
 LOOP_ATTR_RO(backing_file);
Signature · 1 line
2.34.1
author maintainer
#283 lore raw

PATCH 279/475 Fix incorrect type in assignment of ipv6 port for audit

In reply to Greg Kroah-Hartman

From: Casey Schaufler <[email protected]>

[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]

Remove inappropriate use of ntohs() and assign the port value directly.

---
 security/smack/smack_lsm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
security/smack/smack_lsm.c +1 -1
index 12c0fa85d9f8..0253cd2e2358 100644
@@ -2501,7 +2501,7 @@ static int smk_ipv6_check(struct smack_known *subject,
 #ifdef CONFIG_AUDIT
 	smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
 	ad.a.u.net->family = PF_INET6;
-	ad.a.u.net->dport = ntohs(address->sin6_port);
+	ad.a.u.net->dport = address->sin6_port;
 	if (act == SMK_RECEIVING)
 		ad.a.u.net->v6info.saddr = address->sin6_addr;
 	else
Signature · 1 line
2.34.1
author maintainer
#284 lore raw

PATCH 280/475 irqchip/qcom-pdc: Fix broken locking

In reply to Greg Kroah-Hartman

From: Marc Zyngier <[email protected]>

[ Upstream commit a6aca2f460e203781dc41391913cc5b54f4bc0ce ]

pdc_enable_intr() serves as a primitive to qcom_pdc_gic_{en,dis}able, and has a raw spinlock for mutual exclusion, which is uses with interruptible primitives.

This means that this critical section can itself be interrupted. Should the interrupt also be a PDC interrupt, and the endpoint driver perform an irq_disable() on that interrupt, we end-up in a deadlock.

Fix this by using the irqsave/irqrestore variants of the locking primitives.

---
 drivers/irqchip/qcom-pdc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/irqchip/qcom-pdc.c +3 -2
index faa7d61b9d6c..239a889df608 100644
@@ -50,17 +50,18 @@ static u32 pdc_reg_read(int reg, u32 i)
 static void pdc_enable_intr(struct irq_data *d, bool on)
 {
 	int pin_out = d->hwirq;
+	unsigned long flags;
 	u32 index, mask;
 	u32 enable;
 
 	index = pin_out / 32;
 	mask = pin_out % 32;
 
-	raw_spin_lock(&pdc_lock);
+	raw_spin_lock_irqsave(&pdc_lock, flags);
 	enable = pdc_reg_read(IRQ_ENABLE_BANK, index);
 	enable = on ? ENABLE_INTR(enable, mask) : CLEAR_INTR(enable, mask);
 	pdc_reg_write(IRQ_ENABLE_BANK, index, enable);
-	raw_spin_unlock(&pdc_lock);
+	raw_spin_unlock_irqrestore(&pdc_lock, flags);
 }
 
 static void qcom_pdc_gic_mask(struct irq_data *d)
Signature · 1 line
2.34.1
author maintainer
#285 lore raw

PATCH 281/475 irqchip/nvic: Release nvic_base upon failure

In reply to Greg Kroah-Hartman

From: Souptick Joarder (HPE) <[email protected]>

[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]

smatch warning was reported as below ->

smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.

Release nvic_base upon failure.

---
 drivers/irqchip/irq-nvic.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/irqchip/irq-nvic.c +2 -0
index 160b39b5cd10..128a26d219e2 100644
@@ -105,6 +105,7 @@ static int __init nvic_of_init(struct device_node *node,
 
 	if (!nvic_irq_domain) {
 		pr_warn("Failed to allocate irq domain\n");
+		iounmap(nvic_base);
 		return -ENOMEM;
 	}
 
@@ -114,6 +115,7 @@ static int __init nvic_of_init(struct device_node *node,
 	if (ret) {
 		pr_warn("Failed to allocate irq chips\n");
 		irq_domain_remove(nvic_irq_domain);
+		iounmap(nvic_base);
 		return ret;
 	}
 
Signature · 1 line
2.34.1
author maintainer
#286 lore raw

PATCH 282/475 bfq: fix use-after-free in bfq_dispatch_request

In reply to Greg Kroah-Hartman

From: Zhang Wensheng <[email protected]>

[ Upstream commit ab552fcb17cc9e4afe0e4ac4df95fc7b30e8490a ]

KASAN reports a use-after-free report when doing normal scsi-mq test

[69832.239032] ==================================================================
[69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0
[69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155
[69832.244656]
[69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8
[69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[69832.249069] Workqueue: kblockd blk_mq_run_work_fn
[69832.250022] Call Trace:
[69832.250541]  dump_stack+0x9b/0xce
[69832.251232]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.252243]  print_address_description.constprop.6+0x3e/0x60
[69832.253381]  ? __cpuidle_text_end+0x5/0x5
[69832.254211]  ? vprintk_func+0x6b/0x120
[69832.254994]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.255952]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.256914]  kasan_report.cold.9+0x22/0x3a
[69832.257753]  ? bfq_dispatch_request+0x1045/0x44b0
[69832.258755]  check_memory_region+0x1c1/0x1e0
[69832.260248]  bfq_dispatch_request+0x1045/0x44b0
[69832.261181]  ? bfq_bfqq_expire+0x2440/0x2440
[69832.262032]  ? blk_mq_delay_run_hw_queues+0xf9/0x170
[69832.263022]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.264011]  ? blk_mq_sched_request_inserted+0x100/0x100
[69832.265101]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.266206]  ? blk_mq_do_dispatch_ctx+0x570/0x570
[69832.267147]  ? __switch_to+0x5f4/0xee0
[69832.267898]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.268946]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.269840]  blk_mq_run_work_fn+0x51/0x60
[69832.278170]  process_one_work+0x6d4/0xfe0
[69832.278984]  worker_thread+0x91/0xc80
[69832.279726]  ? __kthread_parkme+0xb0/0x110
[69832.280554]  ? process_one_work+0xfe0/0xfe0
[69832.281414]  kthread+0x32d/0x3f0
[69832.282082]  ? kthread_park+0x170/0x170
[69832.282849]  ret_from_fork+0x1f/0x30
[69832.283573]
[69832.283886] Allocated by task 7725:
[69832.284599]  kasan_save_stack+0x19/0x40
[69832.285385]  __kasan_kmalloc.constprop.2+0xc1/0xd0
[69832.286350]  kmem_cache_alloc_node+0x13f/0x460
[69832.287237]  bfq_get_queue+0x3d4/0x1140
[69832.287993]  bfq_get_bfqq_handle_split+0x103/0x510
[69832.289015]  bfq_init_rq+0x337/0x2d50
[69832.289749]  bfq_insert_requests+0x304/0x4e10
[69832.290634]  blk_mq_sched_insert_requests+0x13e/0x390
[69832.291629]  blk_mq_flush_plug_list+0x4b4/0x760
[69832.292538]  blk_flush_plug_list+0x2c5/0x480
[69832.293392]  io_schedule_prepare+0xb2/0xd0
[69832.294209]  io_schedule_timeout+0x13/0x80
[69832.295014]  wait_for_common_io.constprop.1+0x13c/0x270
[69832.296137]  submit_bio_wait+0x103/0x1a0
[69832.296932]  blkdev_issue_discard+0xe6/0x160
[69832.297794]  blk_ioctl_discard+0x219/0x290
[69832.298614]  blkdev_common_ioctl+0x50a/0x1750
[69832.304715]  blkdev_ioctl+0x470/0x600
[69832.305474]  block_ioctl+0xde/0x120
[69832.306232]  vfs_ioctl+0x6c/0xc0
[69832.306877]  __se_sys_ioctl+0x90/0xa0
[69832.307629]  do_syscall_64+0x2d/0x40
[69832.308362]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[69832.309382]
[69832.309701] Freed by task 155:
[69832.310328]  kasan_save_stack+0x19/0x40
[69832.311121]  kasan_set_track+0x1c/0x30
[69832.311868]  kasan_set_free_info+0x1b/0x30
[69832.312699]  __kasan_slab_free+0x111/0x160
[69832.313524]  kmem_cache_free+0x94/0x460
[69832.314367]  bfq_put_queue+0x582/0x940
[69832.315112]  __bfq_bfqd_reset_in_service+0x166/0x1d0
[69832.317275]  bfq_bfqq_expire+0xb27/0x2440
[69832.318084]  bfq_dispatch_request+0x697/0x44b0
[69832.318991]  __blk_mq_do_dispatch_sched+0x52f/0x830
[69832.319984]  __blk_mq_sched_dispatch_requests+0x398/0x4f0
[69832.321087]  blk_mq_sched_dispatch_requests+0xdf/0x140
[69832.322225]  __blk_mq_run_hw_queue+0xc0/0x270
[69832.323114]  blk_mq_run_work_fn+0x51/0x60
[69832.323942]  process_one_work+0x6d4/0xfe0
[69832.324772]  worker_thread+0x91/0xc80
[69832.325518]  kthread+0x32d/0x3f0
[69832.326205]  ret_from_fork+0x1f/0x30
[69832.326932]
[69832.338297] The buggy address belongs to the object at ffff88802622b968
[69832.338297]  which belongs to the cache bfq_queue of size 512
[69832.340766] The buggy address is located 288 bytes inside of
[69832.340766]  512-byte region [ffff88802622b968, ffff88802622bb68)
[69832.343091] The buggy address belongs to the page:
[69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228
[69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0
[69832.347719] flags: 0x1fffff80010200(slab|head)
[69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840
[69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000
[69832.356547] page dumped because: kasan: bad access detected
[69832.357652]
[69832.357970] Memory state around the buggy address:
[69832.358926]  ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.360358]  ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[69832.363273]                       ^
[69832.363975]  ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
[69832.375960]  ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[69832.377405] ==================================================================

In bfq_dispatch_requestfunction, it may have function call:

bfq_dispatch_request
__bfq_dispatch_request
bfq_select_queue
bfq_bfqq_expire
__bfq_bfqd_reset_in_service
bfq_put_queue
kmem_cache_free
In this function call, in_serv_queue has beed expired and meet the conditions to free. In the function bfq_dispatch_request, the address of in_serv_queue pointing to has been released. For getting the value of idle_timer_disabled, it will get flags value from the address which in_serv_queue pointing to, then the problem of use-after-free happens;

Fix the problem by check in_serv_queue == bfqd->in_service_queue, to get the value of idle_timer_disabled if in_serve_queue is equel to bfqd->in_service_queue. If the space of in_serv_queue pointing has been released, this judge will aviod use-after-free problem. And if in_serv_queue may be expired or finished, the idle_timer_disabled will be false which would not give effects to bfq_update_dispatch_stats.

---
 block/bfq-iosched.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
block/bfq-iosched.c +8 -7
index 1a0c581512f2..38c39d50ae04 100644
@@ -4793,7 +4793,7 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
 	struct bfq_data *bfqd = hctx->queue->elevator->elevator_data;
 	struct request *rq;
 	struct bfq_queue *in_serv_queue;
-	bool waiting_rq, idle_timer_disabled;
+	bool waiting_rq, idle_timer_disabled = false;
 
 	spin_lock_irq(&bfqd->lock);
 
@@ -4801,14 +4801,15 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx)
 	waiting_rq = in_serv_queue && bfq_bfqq_wait_request(in_serv_queue);
 
 	rq = __bfq_dispatch_request(hctx);
-
-	idle_timer_disabled =
-		waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+	if (in_serv_queue == bfqd->in_service_queue) {
+		idle_timer_disabled =
+			waiting_rq && !bfq_bfqq_wait_request(in_serv_queue);
+	}
 
 	spin_unlock_irq(&bfqd->lock);
-
-	bfq_update_dispatch_stats(hctx->queue, rq, in_serv_queue,
-				  idle_timer_disabled);
+	bfq_update_dispatch_stats(hctx->queue, rq,
+			idle_timer_disabled ? in_serv_queue : NULL,
+				idle_timer_disabled);
 
 	return rq;
 }
Signature · 1 line
2.34.1
author maintainer
#287 lore raw

PATCH 283/475 ACPICA: Avoid walking the ACPI Namespace if it is not there

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]

ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc

Prevent acpi_ns_walk_namespace() from crashing when called with start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been instantiated yet and acpi_gbl_root_node is NULL.

For instance, this can happen if the kernel is run with "acpi=off" in the command line.

---
 drivers/acpi/acpica/nswalk.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/acpi/acpica/nswalk.c +3 -0
index ceea6af79d12..bf4eb642f423 100644
@@ -169,6 +169,9 @@ acpi_ns_walk_namespace(acpi_object_type type,
 
 	if (start_node == ACPI_ROOT_OBJECT) {
 		start_node = acpi_gbl_root_node;
+		if (!start_node) {
+			return_ACPI_STATUS(AE_NO_NAMESPACE);
+		}
 	}
 
 	/* Null child means "get first node" */
Signature · 1 line
2.34.1
author maintainer
#288 lore raw

PATCH 284/475 lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3

In reply to Greg Kroah-Hartman

From: Paul Menzel <[email protected]>

[ Upstream commit 633174a7046ec3b4572bec24ef98e6ee89bce14b ]

Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the errors below:

    $ cd lib/raid6/test/
    $ make
    <stdin>:1:1: error: stray ‘\’ in program
    <stdin>:1:2: error: stray ‘#’ in program
    <stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \
        before ‘<’ token
    [...]

The errors come from the HAS_ALTIVEC test, which fails, and the POWER optimized versions are not built. That’s also reason nobody noticed on the other architectures.

GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release announcment:

Quoted 11 lines

* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes:
thus a call such as:

    foo := $(shell echo '#')
  is legal.  Previously the number sign needed to be escaped, for example:
    foo := $(shell echo '\#')
  Now this latter will resolve to "\#".  If you want to write makefiles
  portable to both versions, assign the number sign to a variable:
    H := \#
    foo := $(shell echo '$H')
Quoted 2 lines

This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable.

So, do the same as commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make") and commit 929bef467771 ("bpf: Use $(pound) instead of \# in Makefiles") and define and use a $(pound) variable.

Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57

---
 lib/raid6/test/Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
lib/raid6/test/Makefile +3 -1
index b9e6c3648be1..98b9fd0354dd 100644
@@ -4,6 +4,8 @@
 # from userspace.
 #
 
+pound := \#
+
 CC	 = gcc
 OPTFLAGS = -O2			# Adjust as desired
 CFLAGS	 = -I.. -I ../../../include -g $(OPTFLAGS)
@@ -47,7 +49,7 @@ else ifeq ($(HAS_NEON),yes)
         OBJS   += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
         CFLAGS += -DCONFIG_KERNEL_MODE_NEON=1
 else
-        HAS_ALTIVEC := $(shell printf '\#include <altivec.h>\nvector int a;\n' |\
+        HAS_ALTIVEC := $(shell printf '$(pound)include <altivec.h>\nvector int a;\n' |\
                          gcc -c -x c - >/dev/null && rm ./-.o && echo yes)
         ifeq ($(HAS_ALTIVEC),yes)
                 CFLAGS += -I../../../arch/powerpc/include
Signature · 1 line
2.34.1
author maintainer
#289 lore raw

PATCH 285/475 Revert "Revert "block, bfq: honor already-setup queue merges""

In reply to Greg Kroah-Hartman

From: Paolo Valente <[email protected]>

[ Upstream commit 15729ff8143f8135b03988a100a19e66d7cb7ecd ]

A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq:
honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change").

So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq:
honor already-setup queue merges") out. This commit restores it.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

---
 block/bfq-iosched.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)
block/bfq-iosched.c +13 -3
index 38c39d50ae04..1d443d17cf7c 100644
@@ -2523,6 +2523,15 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
 	 * are likely to increase the throughput.
 	 */
 	bfqq->new_bfqq = new_bfqq;
+	/*
+	 * The above assignment schedules the following redirections:
+	 * each time some I/O for bfqq arrives, the process that
+	 * generated that I/O is disassociated from bfqq and
+	 * associated with new_bfqq. Here we increases new_bfqq->ref
+	 * in advance, adding the number of processes that are
+	 * expected to be associated with new_bfqq as they happen to
+	 * issue I/O.
+	 */
 	new_bfqq->ref += process_refs;
 	return new_bfqq;
 }
@@ -2582,6 +2591,10 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 {
 	struct bfq_queue *in_service_bfqq, *new_bfqq;
 
+	/* if a merge has already been setup, then proceed with that first */
+	if (bfqq->new_bfqq)
+		return bfqq->new_bfqq;
+
 	/*
 	 * Do not perform queue merging if the device is non
 	 * rotational and performs internal queueing. In fact, such a
@@ -2636,9 +2649,6 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 	if (bfq_too_late_for_merging(bfqq))
 		return NULL;
 
-	if (bfqq->new_bfqq)
-		return bfqq->new_bfqq;
-
 	if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq))
 		return NULL;
 
Signature · 1 line
2.34.1
author maintainer
#290 lore raw

PATCH 286/475 ACPI/APEI: Limit printable size of BERT table data

In reply to Greg Kroah-Hartman

From: Darren Hart <[email protected]>

[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]

Platforms with large BERT table data can trigger soft lockup errors while attempting to print the entire BERT table data to the console at boot:

  watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]

Observed on Ampere Altra systems with a single BERT record of ~250KB.

The original bert driver appears to have assumed relatively small table data. Since it is impractical to reassemble large table data from interwoven console messages, and the table data is available in

/sys/firmware/acpi/tables/data/BERT

limit the size for tables printed to the console to 1024 (for no reason other than it seemed like a good place to kick off the discussion, would appreciate feedback from existing users in terms of what size would maintain their current usage model).

Alternatively, we could make printing a CONFIG option, use the bert_disable boot arg (or something similar), or use a debug log level. However, all those solutions require extra steps or change the existing behavior for small table data. Limiting the size preserves existing behavior on existing platforms with small table data, and eliminates the soft lockups for platforms with large table data, while still making it available.

---
 drivers/acpi/apei/bert.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/acpi/apei/bert.c +6 -2
index 08d820c04618..76b7539a37a9 100644
@@ -29,6 +29,7 @@
 
 #undef pr_fmt
 #define pr_fmt(fmt) "BERT: " fmt
+#define ACPI_BERT_PRINT_MAX_LEN 1024
 
 static int bert_disable;
 
@@ -58,8 +59,11 @@ static void __init bert_print_all(struct acpi_bert_region *region,
 		}
 
 		pr_info_once("Error records from previous boot:\n");
-
-		cper_estatus_print(KERN_INFO HW_ERR, estatus);
+		if (region_len < ACPI_BERT_PRINT_MAX_LEN)
+			cper_estatus_print(KERN_INFO HW_ERR, estatus);
+		else
+			pr_info_once("Max print length exceeded, table data is available at:\n"
+				     "/sys/firmware/acpi/tables/data/BERT");
 
 		/*
 		 * Because the boot error source is "one-time polled" type,
Signature · 1 line
2.34.1
author maintainer
#291 lore raw

PATCH 287/475 PM: core: keep irq flags in device_pm_check_callbacks()

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ]

The function device_pm_check_callbacks() can be called under the spin lock (in the reported case it happens from genpd_add_device() -> dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.

However this function uncoditionally uses spin_lock_irq() / spin_unlock_irq(), thus not preserving the CPU flags. Use the irqsave/irqrestore instead.

The backtrace for the reference:

[    2.752010] ------------[ cut here ]------------
[    2.756769] raw_local_irq_restore() called with IRQs enabled
[    2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[    2.772338] Modules linked in:
[    2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S                5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[    2.781384] Freeing initrd memory: 46024K
[    2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[    2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[    2.785846] sp : ffff80000805b7d0
[    2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[    2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[    2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[    2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[    2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[    2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[    2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[    2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[    2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[    2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[    2.889774] Call trace:
[    2.892290]  warn_bogus_irq_restore+0x34/0x50
[    2.896770]  _raw_spin_unlock_irqrestore+0x94/0xa0
[    2.901690]  genpd_unlock_spin+0x20/0x30
[    2.905724]  genpd_add_device+0x100/0x2d0
[    2.909850]  __genpd_dev_pm_attach+0xa8/0x23c
[    2.914329]  genpd_dev_pm_attach_by_id+0xc4/0x190
[    2.919167]  genpd_dev_pm_attach_by_name+0x3c/0xd0
[    2.924086]  dev_pm_domain_attach_by_name+0x24/0x30
[    2.929102]  psci_dt_attach_cpu+0x24/0x90
[    2.933230]  psci_cpuidle_probe+0x2d4/0x46c
[    2.937534]  platform_probe+0x68/0xe0
[    2.941304]  really_probe.part.0+0x9c/0x2fc
[    2.945605]  __driver_probe_device+0x98/0x144
[    2.950085]  driver_probe_device+0x44/0x15c
[    2.954385]  __device_attach_driver+0xb8/0x120
[    2.958950]  bus_for_each_drv+0x78/0xd0
[    2.962896]  __device_attach+0xd8/0x180
[    2.966843]  device_initial_probe+0x14/0x20
[    2.971144]  bus_probe_device+0x9c/0xa4
[    2.975092]  device_add+0x380/0x88c
[    2.978679]  platform_device_add+0x114/0x234
[    2.983067]  platform_device_register_full+0x100/0x190
[    2.988344]  psci_idle_init+0x6c/0xb0
[    2.992113]  do_one_initcall+0x74/0x3a0
[    2.996060]  kernel_init_freeable+0x2fc/0x384
[    3.000543]  kernel_init+0x28/0x130
[    3.004132]  ret_from_fork+0x10/0x20
[    3.007817] irq event stamp: 319826
[    3.011404] hardirqs last  enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[    3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[    3.028458] softirqs last  enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[    3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[    3.045607] ---[ end trace 0000000000000000 ]---
---
 drivers/base/power/main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/base/power/main.c +4 -2
index 23af54512053..ae382c4018fd 100644
@@ -2121,7 +2121,9 @@ static bool pm_ops_is_empty(const struct dev_pm_ops *ops)
 
 void device_pm_check_callbacks(struct device *dev)
 {
-	spin_lock_irq(&dev->power.lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->power.lock, flags);
 	dev->power.no_pm_callbacks =
 		(!dev->bus || (pm_ops_is_empty(dev->bus->pm) &&
 		 !dev->bus->suspend && !dev->bus->resume)) &&
@@ -2130,7 +2132,7 @@ void device_pm_check_callbacks(struct device *dev)
 		(!dev->pm_domain || pm_ops_is_empty(&dev->pm_domain->ops)) &&
 		(!dev->driver || (pm_ops_is_empty(dev->driver->pm) &&
 		 !dev->driver->suspend && !dev->driver->resume));
-	spin_unlock_irq(&dev->power.lock);
+	spin_unlock_irqrestore(&dev->power.lock, flags);
 }
 
 bool dev_pm_smart_suspend_and_suspended(struct device *dev)
Signature · 1 line
2.34.1
author maintainer
#292 lore raw

PATCH 288/475 spi: tegra20: Use of_device_get_match_data()

In reply to Greg Kroah-Hartman

From: Minghao Chi <[email protected]>

[ Upstream commit c9839acfcbe20ce43d363c2a9d0772472d9921c0 ]

Use of_device_get_match_data() to simplify the code.

---
 drivers/spi/spi-tegra20-slink.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)
drivers/spi/spi-tegra20-slink.c +1 -7
index 9b59539c8735..e6b12f78c8f0 100644
@@ -1011,14 +1011,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	struct resource		*r;
 	int ret, spi_irq;
 	const struct tegra_slink_chip_data *cdata = NULL;
-	const struct of_device_id *match;
 
-	match = of_match_device(tegra_slink_of_match, &pdev->dev);
-	if (!match) {
-		dev_err(&pdev->dev, "Error: No device match found\n");
-		return -ENODEV;
-	}
-	cdata = match->data;
+	cdata = of_device_get_match_data(&pdev->dev);
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*tspi));
 	if (!master) {
Signature · 1 line
2.34.1
author maintainer
#293 lore raw

PATCH 289/475 ext4: dont BUG if someone dirty pages without asking ext4 first

In reply to Greg Kroah-Hartman

From: Theodore Ts'o <[email protected]>

[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]

[un]pin_user_pages_remote is dirtying pages without properly warning the file system in advance. A related race was noted by Jan Kara in 2018[1]; however, more recently instead of it being a very hard-to-hit race, it could be reliably triggered by process_vm_writev(2) which was discovered by Syzbot[2].

This is technically a bug in mm/gup.c, but arguably ext4 is fragile in that if some other kernel subsystem dirty pages without properly notifying the file system using page_mkwrite(), ext4 will BUG, while other file systems will not BUG (although data will still be lost).

So instead of crashing with a BUG, issue a warning (since there may be potential data loss) and just mark the page as clean to avoid unprivileged denial of service attacks until the problem can be properly fixed. More discussion and background can be found in the thread starting at [2].

[1] https://lore.kernel.org/linux-mm/[email protected]
[2] https://lore.kernel.org/r/[email protected]

---
 fs/ext4/inode.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
fs/ext4/inode.c +25 -0
index dcbd8ac8d471..0d62f05f8925 100644
@@ -2161,6 +2161,15 @@ static int ext4_writepage(struct page *page,
 	else
 		len = PAGE_SIZE;
 
+	/* Should never happen but for bugs in other kernel subsystems */
+	if (!page_has_buffers(page)) {
+		ext4_warning_inode(inode,
+		   "page %lu does not have buffers attached", page->index);
+		ClearPageDirty(page);
+		unlock_page(page);
+		return 0;
+	}
+
 	page_bufs = page_buffers(page);
 	/*
 	 * We cannot do block allocation or other extent handling in this
@@ -2710,6 +2719,22 @@ static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd)
 			wait_on_page_writeback(page);
 			BUG_ON(PageWriteback(page));
 
+			/*
+			 * Should never happen but for buggy code in
+			 * other subsystems that call
+			 * set_page_dirty() without properly warning
+			 * the file system first.  See [1] for more
+			 * information.
+			 *
+			 * [1] https://lore.kernel.org/linux-mm/[email protected]
+			 */
+			if (!page_has_buffers(page)) {
+				ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", page->index);
+				ClearPageDirty(page);
+				unlock_page(page);
+				continue;
+			}
+
 			if (mpd->map.m_len == 0)
 				mpd->first_page = page->index;
 			mpd->next_page = page->index + 1;
Signature · 1 line
2.34.1
syzbot
#294 lore raw

Re: [PATCH 5.4 289/475] ext4: dont BUG if someone dirty pages without asking ext4 first

I see the command but can't find the corresponding bug. The email is sent to [email protected] address but the HASH does not correspond to any known bug. Please double check the…
Quoted 81 lines

From: Theodore Ts'o <[email protected]>

[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]

[un]pin_user_pages_remote is dirtying pages without properly warning the file system in advance. A related race was noted by Jan Kara in 2018[1]; however, more recently instead of it being a very hard-to-hit race, it could be reliably triggered by process_vm_writev(2) which was discovered by Syzbot[2].

This is technically a bug in mm/gup.c, but arguably ext4 is fragile in that if some other kernel subsystem dirty pages without properly notifying the file system using page_mkwrite(), ext4 will BUG, while other file systems will not BUG (although data will still be lost).

So instead of crashing with a BUG, issue a warning (since there may be potential data loss) and just mark the page as clean to avoid unprivileged denial of service attacks until the problem can be properly fixed. More discussion and background can be found in the thread starting at [2].

[1] https://lore.kernel.org/linux-mm/[email protected]
[2] https://lore.kernel.org/r/[email protected]

---
 fs/ext4/inode.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
fs/ext4/inode.c +25 -0
index dcbd8ac8d471..0d62f05f8925 100644
@@ -2161,6 +2161,15 @@ static int ext4_writepage(struct page *page,
 	else
 		len = PAGE_SIZE;
 
+	/* Should never happen but for bugs in other kernel subsystems */
+	if (!page_has_buffers(page)) {
+		ext4_warning_inode(inode,
+		   "page %lu does not have buffers attached", page->index);
+		ClearPageDirty(page);
+		unlock_page(page);
+		return 0;
+	}
+
 	page_bufs = page_buffers(page);
 	/*
 	 * We cannot do block allocation or other extent handling in this
@@ -2710,6 +2719,22 @@ static int mpage_prepare_extent_to_map(struct mpage_da_data *mpd)
 			wait_on_page_writeback(page);
 			BUG_ON(PageWriteback(page));
 
+			/*
+			 * Should never happen but for buggy code in
+			 * other subsystems that call
+			 * set_page_dirty() without properly warning
+			 * the file system first.  See [1] for more
+			 * information.
+			 *
+			 * [1] https://lore.kernel.org/linux-mm/[email protected]
+			 */
+			if (!page_has_buffers(page)) {
+				ext4_warning_inode(mpd->inode, "page %lu does not have buffers attached", page->index);
+				ClearPageDirty(page);
+				unlock_page(page);
+				continue;
+			}
+
 			if (mpd->map.m_len == 0)
 				mpd->first_page = page->index;
 			mpd->next_page = page->index + 1;
Signature · 1 line
2.34.1

I see the command but can't find the corresponding bug. The email is sent to [email protected] address but the HASH does not correspond to any known bug. Please double check the address.

author maintainer
#295 lore raw

PATCH 290/475 ntfs: add sanity check on allocation size

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit 714fbf2647b1a33d914edd695d4da92029c7e7c0 ]

ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation size. It triggers one BUG in the __ntfs_malloc function.

Fix this by adding sanity check on ni->attr_list_size.

---
 fs/ntfs/inode.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/ntfs/inode.c +4 -0
index ea18e4a2a691..cf222c9225d6 100644
@@ -1881,6 +1881,10 @@ int ntfs_read_inode_mount(struct inode *vi)
 		}
 		/* Now allocate memory for the attribute list. */
 		ni->attr_list_size = (u32)ntfs_attr_size(a);
+		if (!ni->attr_list_size) {
+			ntfs_error(sb, "Attr_list_size is zero");
+			goto put_err_out;
+		}
 		ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size);
 		if (!ni->attr_list) {
 			ntfs_error(sb, "Not enough memory to allocate buffer "
Signature · 1 line
2.34.1
author maintainer
#296 lore raw

PATCH 291/475 video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow

In reply to Greg Kroah-Hartman

From: Tim Gardner <[email protected]>

[ Upstream commit 37a1a2e6eeeb101285cd34e12e48a881524701aa ]

Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites.

CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function.
89 strcpy(chan->adapter.name, name);

Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer.

---
 drivers/video/fbdev/nvidia/nv_i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/nvidia/nv_i2c.c +1 -1
index d7994a173245..0b48965a6420 100644
@@ -86,7 +86,7 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name,
 {
 	int rc;
 
-	strcpy(chan->adapter.name, name);
+	strscpy(chan->adapter.name, name, sizeof(chan->adapter.name));
 	chan->adapter.owner = THIS_MODULE;
 	chan->adapter.class = i2c_class;
 	chan->adapter.algo_data = &chan->algo;
Signature · 1 line
2.34.1
author maintainer
#297 lore raw

PATCH 292/475 video: fbdev: w100fb: Reset global state

In reply to Greg Kroah-Hartman

From: Evgeny Novikov <[email protected]>

[ Upstream commit 8738ddcac644964ae128ccd3d80d48773c8d528e ]

w100fb_probe() did not reset the global state to its initial state. This can result in invocation of iounmap() even when there was not the appropriate successful call of ioremap(). For instance, this may be the case if first probe fails after two successful ioremap() while second probe fails when first ioremap() fails. The similar issue is with w100fb_remove(). The patch fixes both bugs.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/video/fbdev/w100fb.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/video/fbdev/w100fb.c +12 -3
index e30f9427b335..52ec80bbfe5e 100644
@@ -770,12 +770,18 @@ int w100fb_probe(struct platform_device *pdev)
 		fb_dealloc_cmap(&info->cmap);
 		kfree(info->pseudo_palette);
 	}
-	if (remapped_fbuf != NULL)
+	if (remapped_fbuf != NULL) {
 		iounmap(remapped_fbuf);
-	if (remapped_regs != NULL)
+		remapped_fbuf = NULL;
+	}
+	if (remapped_regs != NULL) {
 		iounmap(remapped_regs);
-	if (remapped_base != NULL)
+		remapped_regs = NULL;
+	}
+	if (remapped_base != NULL) {
 		iounmap(remapped_base);
+		remapped_base = NULL;
+	}
 	if (info)
 		framebuffer_release(info);
 	return err;
@@ -795,8 +801,11 @@ static int w100fb_remove(struct platform_device *pdev)
 	fb_dealloc_cmap(&info->cmap);
 
 	iounmap(remapped_base);
+	remapped_base = NULL;
 	iounmap(remapped_regs);
+	remapped_regs = NULL;
 	iounmap(remapped_fbuf);
+	remapped_fbuf = NULL;
 
 	framebuffer_release(info);
 
Signature · 1 line
2.34.1
author maintainer
#298 lore raw

PATCH 293/475 video: fbdev: cirrusfb: check pixclock to avoid divide by zero

In reply to Greg Kroah-Hartman

From: George Kennedy <[email protected]>

[ Upstream commit 5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]

Do a sanity check on pixclock value to avoid divide by zero.

If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible.

Syzkaller reported a divide error in cirrusfb_check_pixclock.

divide error: 0000 [#1] SMP KASAN PTI

CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260

Call Trace:
 fb_set_var+0x398/0xf90
 do_fb_ioctl+0x4b8/0x6f0
 fb_ioctl+0xeb/0x130
 __x64_sys_ioctl+0x19d/0x220
 do_syscall_64+0x3a/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
---
 drivers/video/fbdev/cirrusfb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/video/fbdev/cirrusfb.c +8 -8
index e4ce5667b125..1b0a58f96af2 100644
@@ -470,7 +470,7 @@ static int cirrusfb_check_mclk(struct fb_info *info, long freq)
 	return 0;
 }
 
-static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
+static int cirrusfb_check_pixclock(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
 	long freq;
@@ -479,9 +479,7 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
 	unsigned maxclockidx = var->bits_per_pixel >> 3;
 
 	/* convert from ps to kHz */
-	freq = PICOS2KHZ(var->pixclock);
-
-	dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+	freq = PICOS2KHZ(var->pixclock ? : 1);
 
 	maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx];
 	cinfo->multiplexing = 0;
@@ -489,11 +487,13 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
 	/* If the frequency is greater than we can support, we might be able
 	 * to use multiplexing for the video mode */
 	if (freq > maxclock) {
-		dev_err(info->device,
-			"Frequency greater than maxclock (%ld kHz)\n",
-			maxclock);
-		return -EINVAL;
+		var->pixclock = KHZ2PICOS(maxclock);
+
+		while ((freq = PICOS2KHZ(var->pixclock)) > maxclock)
+			var->pixclock++;
 	}
+	dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+
 	/*
 	 * Additional constraint: 8bpp uses DAC clock doubling to allow maximum
 	 * pixel clock
Signature · 1 line
2.34.1
author maintainer
#299 lore raw

PATCH 294/475 video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit

In reply to Greg Kroah-Hartman

From: Yang Guang <[email protected]>

[ Upstream commit 24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]

coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

---
 .../video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c    | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c +1 -1
index 1293515e4b16..0cbc5b9183f8 100644
@@ -476,7 +476,7 @@ static ssize_t show_cabc_available_modes(struct device *dev,
 	int i;
 
 	if (!ddata->has_cabc)
-		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+		return sysfs_emit(buf, "%s\n", cabc_modes[0]);
 
 	for (i = 0, len = 0;
 	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
Signature · 1 line
2.34.1
author maintainer
#300 lore raw

PATCH 295/475 ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960

In reply to Greg Kroah-Hartman

From: David Heidelberg <[email protected]>

[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]

IRQ types blindly copied from very similar APQ8064.

Fixes warnings as:

WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120

...

---
 arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
arch/arm/boot/dts/qcom-msm8960.dtsi +5 -3
index f2aeaccdc1ad..15ff0e8fd0d3 100644
@@ -145,7 +145,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -191,7 +193,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -317,7 +319,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
Signature · 1 line
2.34.1
author maintainer
#301 lore raw

PATCH 296/475 ARM: dts: bcm2837: Add the missing L1/L2 cache information

In reply to Greg Kroah-Hartman

From: Richard Schleich <[email protected]>

[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]

This patch fixes the kernel warning "cacheinfo: Unable to detect cache hierarchy for CPU 0" for the bcm2837 on newer kernel versions.

[florian: Align and remove comments matching property values]
---
 arch/arm/boot/dts/bcm2837.dtsi | 49 ++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
arch/arm/boot/dts/bcm2837.dtsi +49 -0
index beb6c502dadc..bcad098a7fcc 100644
@@ -38,12 +38,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -52,6 +66,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -60,6 +81,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -68,6 +96,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
Signature · 1 line
2.34.1
author maintainer
#302 lore raw

PATCH 297/475 ASoC: madera: Add dependencies on MFD

In reply to Greg Kroah-Hartman

From: Charles Keepax <[email protected]>

[ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ]

The Madera CODECs use regmap_irq functions but nothing ensures that regmap_irq is built into the kernel. Add dependencies on the ASoC symbols for the relevant MFD component. There is no point in building the ASoC driver if the MFD doesn't support it and the MFD part contains the necessary dependencies to ensure everything is built into the kernel.

---
 sound/soc/codecs/Kconfig | 5 +++++
 1 file changed, 5 insertions(+)
sound/soc/codecs/Kconfig +5 -0
index 229cc89f8c5a..466dc67799f4 100644
@@ -586,21 +586,26 @@ config SND_SOC_CS4349
 
 config SND_SOC_CS47L15
 	tristate
+	depends on MFD_CS47L15
 
 config SND_SOC_CS47L24
 	tristate
 
 config SND_SOC_CS47L35
 	tristate
+	depends on MFD_CS47L35
 
 config SND_SOC_CS47L85
 	tristate
+	depends on MFD_CS47L85
 
 config SND_SOC_CS47L90
 	tristate
+	depends on MFD_CS47L90
 
 config SND_SOC_CS47L92
 	tristate
+	depends on MFD_CS47L92
 
 # Cirrus Logic Quad-Channel ADC
 config SND_SOC_CS53L30
Signature · 1 line
2.34.1
author maintainer
#303 lore raw

PATCH 298/475 ARM: ftrace: avoid redundant loads or clobbering IP

In reply to Greg Kroah-Hartman

From: Ard Biesheuvel <[email protected]>

[ Upstream commit d11967870815b5ab89843980e35aab616c97c463 ]

Tweak the ftrace return paths to avoid redundant loads of SP, as well as unnecessary clobbering of IP.

This also fixes the inconsistency of using MOV to perform a function return, which is sub-optimal on recent micro-architectures but more importantly, does not perform an interworking return, unlike compiler generated function returns in Thumb2 builds.

Let's fix this by popping PC from the stack like most ordinary code does.

---
 arch/arm/kernel/entry-ftrace.S | 51 +++++++++++++++-------------------
 1 file changed, 22 insertions(+), 29 deletions(-)
arch/arm/kernel/entry-ftrace.S +22 -29
index f4886fb6e9ba..f33c171e3090 100644
@@ -22,10 +22,7 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
  *
  * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
@@ -70,26 +67,25 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
-				@ before the push {lr} of the mcount mechanism
+	ldr	lr, [sp, #8]    @ get previous LR
 
-	str     lr, [sp, #0]    @ store LR instead of PC
+	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	ldr     lr, [sp, #8]    @ get previous LR
+	str	lr, [sp, #-4]!	@ store previous LR as LR
 
-	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
 
-	stmdb   sp!, {ip, lr}
-	stmdb   sp!, {r0-r11, lr}
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
 	ldr r2, =function_trace_op
 	ldr r2, [r2]				@ pointer to the current
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 
 .endm
 #endif
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	ret	ip
+	ldmia	sp!, {r0-r3}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	ret	ip
+	push	{lr}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif
Signature · 1 line
2.34.1
author maintainer
#304 lore raw

PATCH 299/475 video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()

In reply to Greg Kroah-Hartman

From: Jing Yao <[email protected]>

[ Upstream commit f63658a59c3d439c8ad7b290f8ec270980e0f384 ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

---
 drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c +4 -4
index 4b0793abdd84..a2c7c5cb1523 100644
@@ -409,7 +409,7 @@ static ssize_t dsicm_num_errors_show(struct device *dev,
 	if (r)
 		return r;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+	return sysfs_emit(buf, "%d\n", errors);
 }
 
 static ssize_t dsicm_hw_revision_show(struct device *dev,
@@ -439,7 +439,7 @@ static ssize_t dsicm_hw_revision_show(struct device *dev,
 	if (r)
 		return r;
 
-	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+	return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3);
 }
 
 static ssize_t dsicm_store_ulps(struct device *dev,
@@ -487,7 +487,7 @@ static ssize_t dsicm_show_ulps(struct device *dev,
 	t = ddata->ulps_enabled;
 	mutex_unlock(&ddata->lock);
 
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+	return sysfs_emit(buf, "%u\n", t);
 }
 
 static ssize_t dsicm_store_ulps_timeout(struct device *dev,
@@ -532,7 +532,7 @@ static ssize_t dsicm_show_ulps_timeout(struct device *dev,
 	t = ddata->ulps_timeout;
 	mutex_unlock(&ddata->lock);
 
-	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+	return sysfs_emit(buf, "%u\n", t);
 }
 
 static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
Signature · 1 line
2.34.1
author maintainer
#305 lore raw

PATCH 300/475 video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()

In reply to Greg Kroah-Hartman

From: Jing Yao <[email protected]>

[ Upstream commit c07a039cbb96748f54c02995bae8131cc9a73b0a ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

---
 .../video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c  | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c +2 -2
index bb85b21f0724..9f6ef9e04d9c 100644
@@ -169,7 +169,7 @@ static ssize_t tpo_td043_vmirror_show(struct device *dev,
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
+	return sysfs_emit(buf, "%d\n", ddata->vmirror);
 }
 
 static ssize_t tpo_td043_vmirror_store(struct device *dev,
@@ -199,7 +199,7 @@ static ssize_t tpo_td043_mode_show(struct device *dev,
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
+	return sysfs_emit(buf, "%d\n", ddata->mode);
 }
 
 static ssize_t tpo_td043_mode_store(struct device *dev,
Signature · 1 line
2.34.1
author maintainer
#306 lore raw

PATCH 301/475 video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit

In reply to Greg Kroah-Hartman

From: Jing Yao <[email protected]>

[ Upstream commit 81a998288956d09d7a7a2303d47e4d60ad55c401 ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

---
 drivers/video/fbdev/udlfb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/video/fbdev/udlfb.c +4 -4
index ecbfbbf1c1a7..e269b1391e14 100644
@@ -1427,7 +1427,7 @@ static ssize_t metrics_bytes_rendered_show(struct device *fbdev,
 				   struct device_attribute *a, char *buf) {
 	struct fb_info *fb_info = dev_get_drvdata(fbdev);
 	struct dlfb_data *dlfb = fb_info->par;
-	return snprintf(buf, PAGE_SIZE, "%u\n",
+	return sysfs_emit(buf, "%u\n",
 			atomic_read(&dlfb->bytes_rendered));
 }
 
@@ -1435,7 +1435,7 @@ static ssize_t metrics_bytes_identical_show(struct device *fbdev,
 				   struct device_attribute *a, char *buf) {
 	struct fb_info *fb_info = dev_get_drvdata(fbdev);
 	struct dlfb_data *dlfb = fb_info->par;
-	return snprintf(buf, PAGE_SIZE, "%u\n",
+	return sysfs_emit(buf, "%u\n",
 			atomic_read(&dlfb->bytes_identical));
 }
 
@@ -1443,7 +1443,7 @@ static ssize_t metrics_bytes_sent_show(struct device *fbdev,
 				   struct device_attribute *a, char *buf) {
 	struct fb_info *fb_info = dev_get_drvdata(fbdev);
 	struct dlfb_data *dlfb = fb_info->par;
-	return snprintf(buf, PAGE_SIZE, "%u\n",
+	return sysfs_emit(buf, "%u\n",
 			atomic_read(&dlfb->bytes_sent));
 }
 
@@ -1451,7 +1451,7 @@ static ssize_t metrics_cpu_kcycles_used_show(struct device *fbdev,
 				   struct device_attribute *a, char *buf) {
 	struct fb_info *fb_info = dev_get_drvdata(fbdev);
 	struct dlfb_data *dlfb = fb_info->par;
-	return snprintf(buf, PAGE_SIZE, "%u\n",
+	return sysfs_emit(buf, "%u\n",
 			atomic_read(&dlfb->cpu_kcycles_used));
 }
 
Signature · 1 line
2.34.1
author maintainer
#307 lore raw

PATCH 302/475 ASoC: soc-core: skip zero num_dai component in searching dai name

In reply to Greg Kroah-Hartman

From: Shengjiu Wang <[email protected]>

[ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]

In the case like dmaengine which's not a dai but as a component, the num_dai is zero, dmaengine component has the same component_of_node as cpu dai, when cpu dai component is not ready, but dmaengine component is ready, try to get cpu dai name, the snd_soc_get_dai_name() return -EINVAL, not -EPROBE_DEFER, that cause below error:

asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22

The sound card failed to probe.

So this patch fixes the issue above by skipping the zero num_dai component in searching dai name.

---
 sound/soc/soc-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/soc-core.c +1 -1
index c0e03cc8ea82..093ab32ea2c3 100644
@@ -3362,7 +3362,7 @@ int snd_soc_get_dai_name(struct of_phandle_args *args,
 	for_each_component(pos) {
 		component_of_node = soc_component_to_node(pos);
 
-		if (component_of_node != args->np)
+		if (component_of_node != args->np || !pos->num_dai)
 			continue;
 
 		ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name);
Signature · 1 line
2.34.1
author maintainer
#308 lore raw

PATCH 303/475 media: cx88-mpeg: clear interrupt status register before streaming video

In reply to Greg Kroah-Hartman

From: Daniel González Cabanelas <[email protected]>

[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]

Some cx88 video cards may have transport stream status interrupts set to 1 from cold start, causing errors like this:

cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000

According to CX2388x datasheet, the interrupt status register should be cleared before enabling IRQs to stream video.

Fix it by clearing the Transport Stream Interrupt Status register.

---
 drivers/media/pci/cx88/cx88-mpeg.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/media/pci/cx88/cx88-mpeg.c +3 -0
index a57c991b165b..10d2971ef062 100644
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev    *dev,
 	cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);
 	q->count = 0;
 
+	/* clear interrupt status register */
+	cx_write(MO_TS_INTSTAT,  0x1f1111);
+
 	/* enable irqs */
 	dprintk(1, "setting the interrupt mask\n");
 	cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
Signature · 1 line
2.34.1
author maintainer
#309 lore raw

PATCH 304/475 ARM: tegra: tamonten: Fix I2C3 pad setting

In reply to Greg Kroah-Hartman

From: Richard Leitner <[email protected]>

[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]

This patch fixes the tristate configuration for i2c3 function assigned to the dtf pins on the Tamonten Tegra20 SoM.

---
 arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/boot/dts/tegra20-tamonten.dtsi +3 -3
index 394a6b4dc69d..69cb65d86c46 100644
@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
Signature · 1 line
2.34.1
author maintainer
#310 lore raw

PATCH 305/475 ARM: mmp: Fix failure to remove sram device

In reply to Greg Kroah-Hartman

From: Uwe Kleine-König <[email protected]>

[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]

Make sure in .probe() to set driver data before the function is left to make it possible in .remove() to undo the actions done.

This fixes a potential memory leak and stops returning an error code in .remove() that is ignored by the driver core anyhow.

---
 arch/arm/mach-mmp/sram.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
arch/arm/mach-mmp/sram.c +12 -10
index 6794e2db1ad5..ecc46c31004f 100644
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
+	if (info->sram_size) {
+		mutex_lock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 
Signature · 1 line
2.34.1
author maintainer
#311 lore raw

PATCH 306/475 video: fbdev: sm712fb: Fix crash in smtcfb_write()

In reply to Greg Kroah-Hartman

From: Zheyu Ma <[email protected]>

[ Upstream commit 4f01d09b2bbfbcb47b3eb305560a7f4857a32260 ]

When the sm712fb driver writes three bytes to the framebuffer, the driver will crash:

    BUG: unable to handle page fault for address: ffffc90001ffffff
    RIP: 0010:smtcfb_write+0x454/0x5b0
    Call Trace:
     vfs_write+0x291/0xd60
     ? do_sys_openat2+0x27d/0x350
     ? __fget_light+0x54/0x340
     ksys_write+0xce/0x190
     do_syscall_64+0x43/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix it by removing the open-coded endianness fixup-code.

---
 drivers/video/fbdev/sm712fb.c |   21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)
drivers/video/fbdev/sm712fb.c +4 -17
@@ -1119,7 +1119,7 @@ static ssize_t smtcfb_write(struct fb_in
 		count = total_size - p;
 	}
 
-	buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL);
+	buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
 
@@ -1137,24 +1137,11 @@ static ssize_t smtcfb_write(struct fb_in
 			break;
 		}
 
-		for (i = c >> 2; i--;) {
-			fb_writel(big_swap(*src), dst++);
+		for (i = (c + 3) >> 2; i--;) {
+			fb_writel(big_swap(*src), dst);
+			dst++;
 			src++;
 		}
-		if (c & 3) {
-			u8 *src8 = (u8 *)src;
-			u8 __iomem *dst8 = (u8 __iomem *)dst;
-
-			for (i = c & 3; i--;) {
-				if (i & 1) {
-					fb_writeb(*src8++, ++dst8);
-				} else {
-					fb_writeb(*src8++, --dst8);
-					dst8 += 2;
-				}
-			}
-			dst = (u32 __iomem *)dst8;
-		}
 
 		*ppos += c;
 		buf += c;
author maintainer
#312 lore raw

PATCH 307/475 media: Revert "media: em28xx: add missing em28xx_close_extension"

In reply to Greg Kroah-Hartman

From: Pavel Skripkin <[email protected]>

[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ]

This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938.

Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian reported [1]. Since quick solution didn't come up let's just revert it to make this device work with upstream kernels.

---
 drivers/media/usb/em28xx/em28xx-cards.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/media/usb/em28xx/em28xx-cards.c +1 -4
index 885ccb840ab0..5ae13ee9272d 100644
@@ -4035,11 +4035,8 @@ static void em28xx_usb_disconnect(struct usb_interface *intf)
 
 	em28xx_close_extension(dev);
 
-	if (dev->dev_next) {
-		em28xx_close_extension(dev->dev_next);
+	if (dev->dev_next)
 		em28xx_release_resources(dev->dev_next);
-	}
-
 	em28xx_release_resources(dev);
 
 	if (dev->dev_next) {
Signature · 1 line
2.34.1
author maintainer
#313 lore raw

PATCH 308/475 media: hdpvr: initialize dev->worker at hdpvr_register_videodev

In reply to Greg Kroah-Hartman

From: Dongliang Mu <[email protected]>

[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]

hdpvr_register_videodev is responsible to initialize a worker in hdpvr_device. However, the worker is only initialized at hdpvr_start_streaming other than hdpvr_register_videodev. When hdpvr_probe does not initialize its worker, the hdpvr_disconnect will encounter one WARN in flush_work.The stack trace is as follows:

 hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
 __device_release_driver drivers/base/dd.c:1206 [inline]
 device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
 bus_remove_device+0x108/0x160 drivers/base/bus.c:529
 device_del+0x1fe/0x510 drivers/base/core.c:3592
 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228

Fix this by moving the initialization of dev->worker to the starting of hdpvr_register_videodev

---
 drivers/media/usb/hdpvr/hdpvr-video.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/usb/hdpvr/hdpvr-video.c +3 -1
index bad71d863d39..7849f1fbbcc4 100644
@@ -308,7 +308,6 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
 
 	dev->status = STATUS_STREAMING;
 
-	INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
 	schedule_work(&dev->worker);
 
 	v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
@@ -1165,6 +1164,9 @@ int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent,
 	bool ac3 = dev->flags & HDPVR_FLAG_AC3_CAP;
 	int res;
 
+	// initialize dev->worker
+	INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
+
 	dev->cur_std = V4L2_STD_525_60;
 	dev->width = 720;
 	dev->height = 480;
Signature · 1 line
2.34.1
author maintainer
#314 lore raw

PATCH 309/475 mmc: host: Return an error when ->enable_sdio_irq() ops is missing

In reply to Greg Kroah-Hartman

From: Ulf Hansson <[email protected]>

[ Upstream commit d6c9219ca1139b74541b2a98cee47a3426d754a9 ]

Even if the current WARN() notifies the user that something is severely wrong, we can still end up in a PANIC() when trying to invoke the missing ->enable_sdio_irq() ops. Therefore, let's also return an error code and prevent the host from being added.

While at it, move the code into a separate function to prepare for subsequent changes and for further host caps validations.

---
 drivers/mmc/core/host.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/mmc/core/host.c +13 -2
index e955f1ef2564..32801639e0be 100644
@@ -497,6 +497,16 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 
 EXPORT_SYMBOL(mmc_alloc_host);
 
+static int mmc_validate_host_caps(struct mmc_host *host)
+{
+	if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) {
+		dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /**
  *	mmc_add_host - initialise host hardware
  *	@host: mmc host
@@ -509,8 +519,9 @@ int mmc_add_host(struct mmc_host *host)
 {
 	int err;
 
-	WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
-		!host->ops->enable_sdio_irq);
+	err = mmc_validate_host_caps(host);
+	if (err)
+		return err;
 
 	err = device_add(&host->class_dev);
 	if (err)
Signature · 1 line
2.34.1
author maintainer
#315 lore raw

PATCH 310/475 ALSA: hda/realtek: Add alc256-samsung-headphone fixup

In reply to Greg Kroah-Hartman

From: Matt Kramer <[email protected]>

[ Upstream commit ef248d9bd616b04df8be25539a4dc5db4b6c56f4 ]

This fixes the near-silence of the headphone jack on the ALC256-based Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found through trial and error, using known ALC298 hacks as inspiration. The fixup is auto-enabled only when the NP730QCJ is detected. It can be manually enabled using model=alc256-samsung-headphone.

---
 Documentation/sound/hd-audio/models.rst |  4 ++++
 sound/pci/hda/patch_realtek.c           | 11 +++++++++++
 2 files changed, 15 insertions(+)
Documentation/sound/hd-audio/models.rst +4 -0
index 0ea967d34583..4c91abad7b35 100644
@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============
sound/pci/hda/patch_realtek.c +11 -0
index 6e1770c76381..05ca4196cb0f 100644
@@ -6456,6 +6456,7 @@ enum {
 	ALC285_FIXUP_HP_MUTE_LED,
 	ALC236_FIXUP_HP_MUTE_LED,
 	ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
+	ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET,
 	ALC295_FIXUP_ASUS_MIC_NO_PRESENCE,
 	ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS,
 	ALC269VC_FIXUP_ACER_HEADSET_MIC,
@@ -7740,6 +7741,14 @@ static const struct hda_fixup alc269_fixups[] = {
 			{ }
 		},
 	},
+	[ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x08},
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf},
+			{ }
+		},
+	},
 	[ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
@@ -8217,6 +8226,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
 	SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
+	SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET),
 	SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC),
@@ -8540,6 +8550,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
 	{.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"},
 	{.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"},
 	{.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
+	{.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"},
 	{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
 	{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
 	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
Signature · 1 line
2.34.1
author maintainer
#316 lore raw

PATCH 311/475 powerpc/lib/sstep: Fix sthcx instruction

In reply to Greg Kroah-Hartman

From: Anders Roxell <[email protected]>

commit a633cb1edddaa643fadc70abc88f89a408fa834a upstream.

Looks like there been a copy paste mistake when added the instruction 'stbcx' twice and one was probably meant to be 'sthcx'. Changing to 'sthcx' from 'stbcx'.

Fixes 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc [email protected] # v4.14+
---
 arch/powerpc/lib/sstep.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/lib/sstep.c +1 -1
@@ -2912,7 +2912,7 @@ int emulate_loadstore(struct pt_regs *re
 			__put_user_asmx(op->val, ea, err, "stbcx.", cr);
 			break;
 		case 2:
-			__put_user_asmx(op->val, ea, err, "stbcx.", cr);
+			__put_user_asmx(op->val, ea, err, "sthcx.", cr);
 			break;
 #endif
 		case 4:
author maintainer
#317 lore raw

PATCH 312/475 powerpc/lib/sstep: Fix build errors with newer binutils

In reply to Greg Kroah-Hartman

From: Anders Roxell <[email protected]>

commit 8219d31effa7be5dbc7ff915d7970672e028c701 upstream.

Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up:

{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: stbcx.' {standard input}:10680: Error: unrecognized opcode: lharx' {standard input}:10694: Error: unrecognized opcode: `lbarx'

Rework to add assembler directives [1] around the instruction. The problem with this might be that we can trick a power6 into single-stepping through an stbcx. for instance, and it will execute that in kernel mode.

[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo

Fixes 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Cc [email protected] # v4.14+
---
 arch/powerpc/lib/sstep.c |    6 ++++++
 1 file changed, 6 insertions(+)
arch/powerpc/lib/sstep.c +6 -0
@@ -906,7 +906,10 @@ NOKPROBE_SYMBOL(emulate_dcbz);
 
 #define __put_user_asmx(x, addr, err, op, cr)		\
 	__asm__ __volatile__(				\
+		".machine push\n"			\
+		".machine power8\n"			\
 		"1:	" op " %2,0,%3\n"		\
+		".machine pop\n"			\
 		"	mfcr	%1\n"			\
 		"2:\n"					\
 		".section .fixup,\"ax\"\n"		\
@@ -919,7 +922,10 @@ NOKPROBE_SYMBOL(emulate_dcbz);
 
 #define __get_user_asmx(x, addr, err, op)		\
 	__asm__ __volatile__(				\
+		".machine push\n"			\
+		".machine power8\n"			\
 		"1:	"op" %1,0,%2\n"			\
+		".machine pop\n"			\
 		"2:\n"					\
 		".section .fixup,\"ax\"\n"		\
 		"3:	li	%0,%3\n"		\
author maintainer
#318 lore raw

PATCH 313/475 powerpc: Fix build errors with newer binutils

In reply to Greg Kroah-Hartman

From: Anders Roxell <[email protected]>

commit 8667d0d64dd1f84fd41b5897fd87fa9113ae05e3 upstream.

Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up:

{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: stbcix' {standard input}:1433: Error: unrecognized opcode: lwzcix' {standard input}:1453: Error: unrecognized opcode: stbcix' {standard input}:1460: Error: unrecognized opcode: stwcix' {standard input}:1596: Error: unrecognized opcode: `stbcix'
...

Rework to add assembler directives [1] around the instruction. Going through them one by one shows that the changes should be safe. Like __get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(), which according to the name is specific to power9. And __raw_rm_read*() are only called in things that are powernv or book3s_hv specific.

[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo

---
 arch/powerpc/include/asm/io.h        |   40 ++++++++++++++++++++++++++++-------
 arch/powerpc/include/asm/uaccess.h   |    3 ++
 arch/powerpc/platforms/powernv/rng.c |    6 ++++-
 3 files changed, 40 insertions(+), 9 deletions(-)
arch/powerpc/include/asm/io.h +32 -8
@@ -345,25 +345,37 @@ static inline void __raw_writeq_be(unsig
  */
 static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
 {
-	__asm__ __volatile__("stbcix %0,0,%1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      stbcix %0,0,%1;  \
+			      .machine pop;"
 		: : "r" (val), "r" (paddr) : "memory");
 }
 
 static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
 {
-	__asm__ __volatile__("sthcix %0,0,%1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      sthcix %0,0,%1;  \
+			      .machine pop;"
 		: : "r" (val), "r" (paddr) : "memory");
 }
 
 static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
 {
-	__asm__ __volatile__("stwcix %0,0,%1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      stwcix %0,0,%1;  \
+			      .machine pop;"
 		: : "r" (val), "r" (paddr) : "memory");
 }
 
 static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
 {
-	__asm__ __volatile__("stdcix %0,0,%1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      stdcix %0,0,%1;  \
+			      .machine pop;"
 		: : "r" (val), "r" (paddr) : "memory");
 }
 
@@ -375,7 +387,10 @@ static inline void __raw_rm_writeq_be(u6
 static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
 {
 	u8 ret;
-	__asm__ __volatile__("lbzcix %0,0, %1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      lbzcix %0,0, %1; \
+			      .machine pop;"
 			     : "=r" (ret) : "r" (paddr) : "memory");
 	return ret;
 }
@@ -383,7 +398,10 @@ static inline u8 __raw_rm_readb(volatile
 static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
 {
 	u16 ret;
-	__asm__ __volatile__("lhzcix %0,0, %1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      lhzcix %0,0, %1; \
+			      .machine pop;"
 			     : "=r" (ret) : "r" (paddr) : "memory");
 	return ret;
 }
@@ -391,7 +409,10 @@ static inline u16 __raw_rm_readw(volatil
 static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
 {
 	u32 ret;
-	__asm__ __volatile__("lwzcix %0,0, %1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      lwzcix %0,0, %1; \
+			      .machine pop;"
 			     : "=r" (ret) : "r" (paddr) : "memory");
 	return ret;
 }
@@ -399,7 +420,10 @@ static inline u32 __raw_rm_readl(volatil
 static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
 {
 	u64 ret;
-	__asm__ __volatile__("ldcix %0,0, %1"
+	__asm__ __volatile__(".machine push;   \
+			      .machine power6; \
+			      ldcix %0,0, %1;  \
+			      .machine pop;"
 			     : "=r" (ret) : "r" (paddr) : "memory");
 	return ret;
 }
arch/powerpc/include/asm/uaccess.h +3 -0
@@ -191,8 +191,11 @@ extern long __get_user_bad(void);
  */
 #define __get_user_atomic_128_aligned(kaddr, uaddr, err)		\
 	__asm__ __volatile__(				\
+		".machine push\n"			\
+		".machine altivec\n"			\
 		"1:	lvx  0,0,%1	# get user\n"	\
 		" 	stvx 0,0,%2	# put kernel\n"	\
+		".machine pop\n"			\
 		"2:\n"					\
 		".section .fixup,\"ax\"\n"		\
 		"3:	li %0,%3\n"			\
arch/powerpc/platforms/powernv/rng.c +5 -1
@@ -43,7 +43,11 @@ static unsigned long rng_whiten(struct p
 	unsigned long parity;
 
 	/* Calculate the parity of the value */
-	asm ("popcntd %0,%1" : "=r" (parity) : "r" (val));
+	asm (".machine push;   \
+	      .machine power7; \
+	      popcntd %0,%1;   \
+	      .machine pop;"
+	     : "=r" (parity) : "r" (val));
 
 	/* xor our value with the previous mask */
 	val ^= rng->mask;
author maintainer
#319 lore raw

PATCH 314/475 scsi: qla2xxx: Fix stuck session in gpdb

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

commit 725d3a0d31a51c0debf970011e05f585e805165b upstream.

Fix stuck sessions in get port database. When a thread is in the process of re-establishing a session, a flag is set to prevent multiple threads / triggers from doing the same task. This flag was left on, where any attempt to relogin was locked out. Clear this flag, if the attempt has failed.

---
 drivers/scsi/qla2xxx/qla_init.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +3 -3
@@ -1314,9 +1314,9 @@ int qla24xx_async_gpdb(struct scsi_qla_h
 	if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT) ||
 	    fcport->loop_id == FC_NO_LOOP_ID) {
 		ql_log(ql_log_warn, vha, 0xffff,
-		    "%s: %8phC - not sending command.\n",
-		    __func__, fcport->port_name);
-		return rval;
+		    "%s: %8phC online %d flags %x - not sending command.\n",
+		    __func__, fcport->port_name, vha->flags.online, fcport->flags);
+		goto done;
 	}
 
 	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
author maintainer
#320 lore raw

PATCH 315/475 scsi: qla2xxx: Fix wrong FDMI data for 64G adapter

In reply to Greg Kroah-Hartman

From: Bikash Hazarika <[email protected]>

commit 1cfbbacbee2d6ea3816386a483e3c7a96e5bd657 upstream.

Corrected transmission speed mask values for FC.

Supported Speed: 16 32 20 Gb/s ===> Should be 64 instead of 20
Supported Speed: 16G 32G 48G ===> Should be 64G instead of 48G

---
 drivers/scsi/qla2xxx/qla_def.h |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_def.h +5 -1
@@ -2725,7 +2725,11 @@ struct ct_fdmiv2_hba_attributes {
 #define FDMI_PORT_SPEED_8GB		0x10
 #define FDMI_PORT_SPEED_16GB		0x20
 #define FDMI_PORT_SPEED_32GB		0x40
-#define FDMI_PORT_SPEED_64GB		0x80
+#define FDMI_PORT_SPEED_20GB		0x80
+#define FDMI_PORT_SPEED_40GB		0x100
+#define FDMI_PORT_SPEED_128GB		0x200
+#define FDMI_PORT_SPEED_64GB		0x400
+#define FDMI_PORT_SPEED_256GB		0x800
 #define FDMI_PORT_SPEED_UNKNOWN		0x8000
 
 #define FC_CLASS_2	0x04
author maintainer
#321 lore raw

PATCH 316/475 scsi: qla2xxx: Fix warning for missing error code

In reply to Greg Kroah-Hartman

From: Nilesh Javali <[email protected]>

commit 14cb838d245ae0d523b2f7804af5a02c22e79f5a upstream.

Fix smatch-reported warning message:

drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error code 'res'

---
 drivers/scsi/qla2xxx/qla_target.c |    1 +
 1 file changed, 1 insertion(+)
drivers/scsi/qla2xxx/qla_target.c +1 -0
@@ -3251,6 +3251,7 @@ int qlt_xmit_response(struct qla_tgt_cmd
 			"RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n",
 			vha->flags.online, qla2x00_reset_active(vha),
 			cmd->reset_count, qpair->chip_reset);
+		res = 0;
 		goto out_unmap_unlock;
 	}
 
author maintainer
#322 lore raw

PATCH 317/475 scsi: qla2xxx: Fix device reconnect in loop topology

In reply to Greg Kroah-Hartman

From: Arun Easi <[email protected]>

commit 8ad4be3d15cf144b5834bdb00d5bbe4050938dc7 upstream.

A device logout in loop topology initiates a device connection teardown which loses the FW device handle. In loop topo, the device handle is not regrabbed leading to device login failures and eventually to loss of the device. Fix this by taking the main login path that does it.

---
 drivers/scsi/qla2xxx/qla_init.c |   15 +++++++++++++++
 drivers/scsi/qla2xxx/qla_os.c   |    5 +++++
 2 files changed, 20 insertions(+)
drivers/scsi/qla2xxx/qla_init.c +15 -0
@@ -955,6 +955,9 @@ static void qla24xx_handle_gnl_done_even
 				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 			}
 			break;
+		case ISP_CFG_NL:
+			qla24xx_fcport_handle_login(vha, fcport);
+			break;
 		default:
 			break;
 		}
@@ -1477,6 +1480,11 @@ static void qla_chk_n2n_b4_login(struct
 	u8 login = 0;
 	int rc;
 
+	ql_dbg(ql_dbg_disc, vha, 0x307b,
+	    "%s %8phC DS %d LS %d lid %d retries=%d\n",
+	    __func__, fcport->port_name, fcport->disc_state,
+	    fcport->fw_login_state, fcport->loop_id, fcport->login_retry);
+
 	if (qla_tgt_mode_enabled(vha))
 		return;
 
@@ -5217,6 +5225,13 @@ skip_login:
 			memcpy(fcport->node_name, new_fcport->node_name,
 			    WWN_SIZE);
 			fcport->scan_state = QLA_FCPORT_FOUND;
+			if (fcport->login_retry == 0) {
+				fcport->login_retry = vha->hw->login_retry_count;
+				ql_dbg(ql_dbg_disc, vha, 0x2135,
+				    "Port login retry %8phN, lid 0x%04x retry cnt=%d.\n",
+				    fcport->port_name, fcport->loop_id,
+				    fcport->login_retry);
+			}
 			found++;
 			break;
 		}
drivers/scsi/qla2xxx/qla_os.c +5 -0
@@ -5349,6 +5349,11 @@ void qla2x00_relogin(struct scsi_qla_hos
 					ea.fcport = fcport;
 					qla24xx_handle_relogin_event(vha, &ea);
 				} else if (vha->hw->current_topology ==
+					 ISP_CFG_NL &&
+					IS_QLA2XXX_MIDTYPE(vha->hw)) {
+					(void)qla24xx_fcport_handle_login(vha,
+									fcport);
+				} else if (vha->hw->current_topology ==
 				    ISP_CFG_NL) {
 					fcport->login_retry--;
 					status =
author maintainer
#323 lore raw

PATCH 318/475 scsi: qla2xxx: Add devids and conditionals for 28xx

In reply to Greg Kroah-Hartman

From: Joe Carnuccio <[email protected]>

commit 0d6a536cb1fcabb6c3e9c94871c8d0b29bb5813b upstream.

This is an update to the original 28xx adapter enablement. Add a bunch of conditionals that are applicable for 28xx.

---
 drivers/scsi/qla2xxx/qla_attr.c   |    7 ++-----
 drivers/scsi/qla2xxx/qla_init.c   |    8 +++-----
 drivers/scsi/qla2xxx/qla_mbx.c    |   14 +++++++++++---
 drivers/scsi/qla2xxx/qla_os.c     |    3 +--
 drivers/scsi/qla2xxx/qla_sup.c    |    4 ++--
 drivers/scsi/qla2xxx/qla_target.c |    3 +--
 6 files changed, 20 insertions(+), 19 deletions(-)
drivers/scsi/qla2xxx/qla_attr.c +2 -5
@@ -527,7 +527,7 @@ qla2x00_sysfs_read_vpd(struct file *filp
 	if (!capable(CAP_SYS_ADMIN))
 		return -EINVAL;
 
-	if (IS_NOCACHE_VPD_TYPE(ha))
+	if (!IS_NOCACHE_VPD_TYPE(ha))
 		goto skip;
 
 	faddr = ha->flt_region_vpd << 2;
@@ -710,7 +710,7 @@ qla2x00_sysfs_write_reset(struct file *f
 		ql_log(ql_log_info, vha, 0x706f,
 		    "Issuing MPI reset.\n");
 
-		if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
+		if (IS_QLA83XX(ha)) {
 			uint32_t idc_control;
 
 			qla83xx_idc_lock(vha, 0);
@@ -1020,9 +1020,6 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t
 			continue;
 		if (iter->type == 3 && !(IS_CNA_CAPABLE(ha)))
 			continue;
-		if (iter->type == 0x27 &&
-		    (!IS_QLA27XX(ha) || !IS_QLA28XX(ha)))
-			continue;
 
 		sysfs_remove_bin_file(&host->shost_gendev.kobj,
 		    iter->attr);
drivers/scsi/qla2xxx/qla_init.c +3 -5
@@ -3241,7 +3241,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
 		mem_size = (ha->fw_memory_size - 0x11000 + 1) *
 		    sizeof(uint16_t);
 	} else if (IS_FWI2_CAPABLE(ha)) {
-		if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
+		if (IS_QLA83XX(ha))
 			fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem);
 		else if (IS_QLA81XX(ha))
 			fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
@@ -3253,8 +3253,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
 		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
 		    sizeof(uint32_t);
 		if (ha->mqenable) {
-			if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) &&
-			    !IS_QLA28XX(ha))
+			if (!IS_QLA83XX(ha))
 				mq_size = sizeof(struct qla2xxx_mq_chain);
 			/*
 			 * Allocate maximum buffer size for all queues - Q0.
@@ -3751,8 +3750,7 @@ enable_82xx_npiv:
 			    ha->fw_major_version, ha->fw_minor_version,
 			    ha->fw_subminor_version);
 
-			if (IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
-			    IS_QLA28XX(ha)) {
+			if (IS_QLA83XX(ha)) {
 				ha->flags.fac_supported = 0;
 				rval = QLA_SUCCESS;
 			}
drivers/scsi/qla2xxx/qla_mbx.c +11 -3
@@ -10,6 +10,12 @@
 #include <linux/delay.h>
 #include <linux/gfp.h>
 
+#ifdef CONFIG_PPC
+#define IS_PPCARCH      true
+#else
+#define IS_PPCARCH      false
+#endif
+
 static struct mb_cmd_name {
 	uint16_t cmd;
 	const char *str;
@@ -731,6 +737,9 @@ qla2x00_execute_fw(scsi_qla_host_t *vha,
 				vha->min_supported_speed =
 				    nv->min_supported_speed;
 			}
+
+			if (IS_PPCARCH)
+				mcp->mb[11] |= BIT_4;
 		}
 
 		if (ha->flags.exlogins_enabled)
@@ -2897,8 +2906,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_
 		ha->orig_fw_iocb_count = mcp->mb[10];
 		if (ha->flags.npiv_supported)
 			ha->max_npiv_vports = mcp->mb[11];
-		if (IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
-		    IS_QLA28XX(ha))
+		if (IS_QLA81XX(ha) || IS_QLA83XX(ha))
 			ha->fw_max_fcf_count = mcp->mb[12];
 	}
 
@@ -5391,7 +5399,7 @@ qla2x00_get_data_rate(scsi_qla_host_t *v
 	mcp->out_mb = MBX_1|MBX_0;
 	mcp->in_mb = MBX_2|MBX_1|MBX_0;
 	if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
-		mcp->in_mb |= MBX_3;
+		mcp->in_mb |= MBX_4|MBX_3;
 	mcp->tov = MBX_TOV_SECONDS;
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
drivers/scsi/qla2xxx/qla_os.c +1 -2
@@ -3627,8 +3627,7 @@ qla2x00_unmap_iobases(struct qla_hw_data
 		if (ha->mqiobase)
 			iounmap(ha->mqiobase);
 
-		if ((IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) &&
-		    ha->msixbase)
+		if (ha->msixbase)
 			iounmap(ha->msixbase);
 	}
 }
drivers/scsi/qla2xxx/qla_sup.c +2 -2
@@ -843,7 +843,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vh
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_IMG_PRI_27XX:
-			if (IS_QLA27XX(ha) && !IS_QLA28XX(ha))
+			if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
 				ha->flt_region_img_status_pri = start;
 			break;
 		case FLT_REG_IMG_SEC_27XX:
@@ -1355,7 +1355,7 @@ next:
 		    flash_data_addr(ha, faddr), cpu_to_le32(*dwptr));
 		if (ret) {
 			ql_dbg(ql_dbg_user, vha, 0x7006,
-			    "Failed slopw write %x (%x)\n", faddr, *dwptr);
+			    "Failed slow write %x (%x)\n", faddr, *dwptr);
 			break;
 		}
 	}
drivers/scsi/qla2xxx/qla_target.c +1 -2
@@ -7084,8 +7084,7 @@ qlt_probe_one_stage1(struct scsi_qla_hos
 	if (!QLA_TGT_MODE_ENABLED())
 		return;
 
-	if  ((ql2xenablemsix == 0) || IS_QLA83XX(ha) || IS_QLA27XX(ha) ||
-	    IS_QLA28XX(ha)) {
+	if  (ha->mqenable || IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
 		ISP_ATIO_Q_IN(base_vha) = &ha->mqiobase->isp25mq.atio_q_in;
 		ISP_ATIO_Q_OUT(base_vha) = &ha->mqiobase->isp25mq.atio_q_out;
 	} else {
author maintainer
#324 lore raw

PATCH 319/475 scsi: qla2xxx: Check for firmware dump already collected

In reply to Greg Kroah-Hartman

From: Joe Carnuccio <[email protected]>

commit cfbafad7c6032d449a5a07f2d273acd2437bbc6a upstream.

While allocating firmware dump, check if dump is already collected and do not re-allocate the buffer.

---
 drivers/scsi/qla2xxx/qla_init.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/scsi/qla2xxx/qla_init.c +8 -0
@@ -3231,6 +3231,14 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *v
 	struct rsp_que *rsp = ha->rsp_q_map[0];
 	struct qla2xxx_fw_dump *fw_dump;
 
+	if (ha->fw_dump) {
+		ql_dbg(ql_dbg_init, vha, 0x00bd,
+		    "Firmware dump already allocated.\n");
+		return;
+	}
+
+	ha->fw_dumped = 0;
+	ha->fw_dump_cap_flags = 0;
 	dump_size = fixed_size = mem_size = eft_size = fce_size = mq_size = 0;
 	req_q_size = rsp_q_size = 0;
 
author maintainer
#325 lore raw

PATCH 320/475 scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()

In reply to Greg Kroah-Hartman

From: Saurav Kashyap <[email protected]>

commit a60447e7d451df42c7bde43af53b34f10f34f469 upstream.

[   12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020
[   12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[   12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G          I      --------- ---  5.14.0-29.el9.x86_64 #1
[   12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[   12.356356] Call Trace:
[   12.358821]  dump_stack_lvl+0x34/0x44
[   12.362514]  check_preemption_disabled+0xd9/0xe0
[   12.367164]  qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[   12.372481]  qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[   12.377617]  ? _raw_spin_lock_irqsave+0x19/0x40
[   12.384284]  local_pci_probe+0x42/0x80
[   12.390162]  ? pci_match_device+0xd7/0x110
[   12.396366]  pci_device_probe+0xfd/0x1b0
[   12.402372]  really_probe+0x1e7/0x3e0
[   12.408114]  __driver_probe_device+0xfe/0x180
[   12.414544]  driver_probe_device+0x1e/0x90
[   12.420685]  __driver_attach+0xc0/0x1c0
[   12.426536]  ? __device_attach_driver+0xe0/0xe0
[   12.433061]  ? __device_attach_driver+0xe0/0xe0
[   12.439538]  bus_for_each_dev+0x78/0xc0
[   12.445294]  bus_add_driver+0x12b/0x1e0
[   12.451021]  driver_register+0x8f/0xe0
[   12.456631]  ? 0xffffffffc07bc000
[   12.461773]  qla2x00_module_init+0x1be/0x229 [qla2xxx]
[   12.468776]  do_one_initcall+0x44/0x200
[   12.474401]  ? load_module+0xad3/0xba0
[   12.479908]  ? kmem_cache_alloc_trace+0x45/0x410
[   12.486268]  do_init_module+0x5c/0x280
[   12.491730]  __do_sys_init_module+0x12e/0x1b0
[   12.497785]  do_syscall_64+0x3b/0x90
[   12.503029]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   12.509764] RIP: 0033:0x7f554f73ab2e
---
 drivers/scsi/qla2xxx/qla_init.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla2xxx/qla_init.c +1 -1
@@ -9022,7 +9022,7 @@ struct qla_qpair *qla2xxx_create_qpair(s
 		qpair->rsp->req = qpair->req;
 		qpair->rsp->qpair = qpair;
 		/* init qpair to this cpu. Will adjust at run time. */
-		qla_cpu_update(qpair, smp_processor_id());
+		qla_cpu_update(qpair, raw_smp_processor_id());
 
 		if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 			if (ha->fw_attributes & BIT_4)
author maintainer
#326 lore raw

PATCH 321/475 scsi: qla2xxx: Fix disk failure to rediscover

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99 upstream.

User experienced some of the LUN failed to get rediscovered after long cable pull test. The issue is triggered by a race condition between driver setting session online state vs starting the LUN scan process at the same time. Current code set the online state after notifying the session is available. In this case, trigger to start the LUN scan process happened before driver could set the session in online state. LUN scan ends up with failure due to the session online check was failing.

Set the online state before reporting of the availability of the session.

---
 drivers/scsi/qla2xxx/qla_init.c |    5 +++--
 drivers/scsi/qla2xxx/qla_nvme.c |    5 +++++
 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +3 -2
@@ -5372,6 +5372,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t
 	if (atomic_read(&fcport->state) == FCS_ONLINE)
 		return;
 
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	rport_ids.node_name = wwn_to_u64(fcport->node_name);
 	rport_ids.port_name = wwn_to_u64(fcport->port_name);
 	rport_ids.port_id = fcport->d_id.b.domain << 16 |
@@ -5467,6 +5469,7 @@ qla2x00_update_fcport(scsi_qla_host_t *v
 		qla2x00_reg_remote_port(vha, fcport);
 		break;
 	case MODE_TARGET:
+		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 		if (!vha->vha_tgt.qla_tgt->tgt_stop &&
 			!vha->vha_tgt.qla_tgt->tgt_stopped)
 			qlt_fc_port_added(vha, fcport);
@@ -5481,8 +5484,6 @@ qla2x00_update_fcport(scsi_qla_host_t *v
 		break;
 	}
 
-	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
 	if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
 		if (fcport->id_changed) {
 			fcport->id_changed = 0;
drivers/scsi/qla2xxx/qla_nvme.c +5 -0
@@ -36,6 +36,11 @@ int qla_nvme_register_remote(struct scsi
 		(fcport->nvme_flag & NVME_FLAG_REGISTERED))
 		return 0;
 
+	if (atomic_read(&fcport->state) == FCS_ONLINE)
+		return 0;
+
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
 
 	memset(&req, 0, sizeof(struct nvme_fc_port_info));
author maintainer
#327 lore raw

PATCH 322/475 scsi: qla2xxx: Fix incorrect reporting of task management failure

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

commit 58ca5999e0367d131de82a75257fbfd5aed0195d upstream.

User experienced no task management error while target device is responding with error. The RSP_CODE field in the status IOCB is in little endian. Driver assumes it's big endian and it picked up erroneous data.

Convert the data back to big endian as is on the wire.

---
 drivers/scsi/qla2xxx/qla_isr.c |    1 +
 1 file changed, 1 insertion(+)
drivers/scsi/qla2xxx/qla_isr.c +1 -0
@@ -1839,6 +1839,7 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *v
 		iocb->u.tmf.data = QLA_FUNCTION_FAILED;
 	} else if ((le16_to_cpu(sts->scsi_status) &
 	    SS_RESPONSE_INFO_LEN_VALID)) {
+		host_to_fcp_swap(sts->data, sizeof(sts->data));
 		if (le32_to_cpu(sts->rsp_data_len) < 4) {
 			ql_log(ql_log_warn, fcport->vha, 0x503b,
 			    "Async-%s error - hdl=%x not enough response(%d).\n",
author maintainer
#328 lore raw

PATCH 323/475 scsi: qla2xxx: Fix hang due to session stuck

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

commit c02aada06d19a215c8291bd968a99a270e96f734 upstream.

User experienced device lost. The log shows Get port data base command was queued up, failed, and requeued again. Every time it is requeued, it set the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring because driver thinks a recovery is in progress for this session. In essence, this session is hung. The reason it gets into this place is the session deletion got in front of this call due to link perturbation.

Break the requeue cycle and exit. The session deletion code will trigger a session relogin.

---
 drivers/scsi/qla2xxx/qla_def.h  |    4 ++++
 drivers/scsi/qla2xxx/qla_init.c |   19 +++++++++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_def.h +4 -0
@@ -4870,4 +4870,8 @@ struct sff_8247_a0 {
 #include "qla_gbl.h"
 #include "qla_dbg.h"
 #include "qla_inline.h"
+
+#define IS_SESSION_DELETED(_fcport) (_fcport->disc_state == DSC_DELETE_PEND || \
+				      _fcport->disc_state == DSC_DELETED)
+
 #endif
drivers/scsi/qla2xxx/qla_init.c +17 -2
@@ -572,6 +572,14 @@ qla2x00_async_adisc(struct scsi_qla_host
 	struct srb_iocb *lio;
 	int rval = QLA_FUNCTION_FAILED;
 
+	if (IS_SESSION_DELETED(fcport)) {
+		ql_log(ql_log_warn, vha, 0xffff,
+		       "%s: %8phC is being delete - not sending command.\n",
+		       __func__, fcport->port_name);
+		fcport->flags &= ~FCF_ASYNC_ACTIVE;
+		return rval;
+	}
+
 	if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
 		return rval;
 
@@ -1314,8 +1322,15 @@ int qla24xx_async_gpdb(struct scsi_qla_h
 	struct port_database_24xx *pd;
 	struct qla_hw_data *ha = vha->hw;
 
-	if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT) ||
-	    fcport->loop_id == FC_NO_LOOP_ID) {
+	if (IS_SESSION_DELETED(fcport)) {
+		ql_log(ql_log_warn, vha, 0xffff,
+		       "%s: %8phC is being delete - not sending command.\n",
+		       __func__, fcport->port_name);
+		fcport->flags &= ~FCF_ASYNC_ACTIVE;
+		return rval;
+	}
+
+	if (!vha->flags.online || fcport->flags & FCF_ASYNC_SENT) {
 		ql_log(ql_log_warn, vha, 0xffff,
 		    "%s: %8phC online %d flags %x - not sending command.\n",
 		    __func__, fcport->port_name, vha->flags.online, fcport->flags);
author maintainer
#329 lore raw

PATCH 324/475 scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests

In reply to Greg Kroah-Hartman

From: Arun Easi <[email protected]>

commit c85ab7d9e27a80e48d5b7d7fb2fe2b0fdb2de523 upstream.

At NVMe ELS request time, request structure is DMA mapped and never unmapped. Fix this by calling the unmap on ELS completion.

Fixes e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
---
 drivers/scsi/qla2xxx/qla_nvme.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
drivers/scsi/qla2xxx/qla_nvme.c +17 -0
@@ -157,6 +157,18 @@ out:
 	qla2xxx_rel_qpair_sp(sp->qpair, sp);
 }
 
+static void qla_nvme_ls_unmap(struct srb *sp, struct nvmefc_ls_req *fd)
+{
+	if (sp->flags & SRB_DMA_VALID) {
+		struct srb_iocb *nvme = &sp->u.iocb_cmd;
+		struct qla_hw_data *ha = sp->fcport->vha->hw;
+
+		dma_unmap_single(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
+				 fd->rqstlen, DMA_TO_DEVICE);
+		sp->flags &= ~SRB_DMA_VALID;
+	}
+}
+
 static void qla_nvme_release_ls_cmd_kref(struct kref *kref)
 {
 	struct srb *sp = container_of(kref, struct srb, cmd_kref);
@@ -173,6 +185,8 @@ static void qla_nvme_release_ls_cmd_kref
 	spin_unlock_irqrestore(&priv->cmd_lock, flags);
 
 	fd = priv->fd;
+
+	qla_nvme_ls_unmap(sp, fd);
 	fd->done(fd, priv->comp_status);
 out:
 	qla2x00_rel_sp(sp);
@@ -319,6 +333,8 @@ static int qla_nvme_ls_req(struct nvme_f
 	dma_sync_single_for_device(&ha->pdev->dev, nvme->u.nvme.cmd_dma,
 	    fd->rqstlen, DMA_TO_DEVICE);
 
+	sp->flags |= SRB_DMA_VALID;
+
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS) {
 		ql_log(ql_log_warn, vha, 0x700e,
@@ -326,6 +342,7 @@ static int qla_nvme_ls_req(struct nvme_f
 		wake_up(&sp->nvme_ls_waitq);
 		sp->priv = NULL;
 		priv->sp = NULL;
+		qla_nvme_ls_unmap(sp, fd);
 		qla2x00_rel_sp(sp);
 		return rval;
 	}
author maintainer
#330 lore raw

PATCH 325/475 scsi: qla2xxx: Fix N2N inconsistent PLOGI

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

commit c13ce47c64ea8f14e77eecb40d1e7c2ac667f898 upstream.

For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This is not consistent. Delete the session to restart the connection where ELS pass through PLOGI would be used consistently.

---
 drivers/scsi/qla2xxx/qla_iocb.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/scsi/qla2xxx/qla_iocb.c +3 -5
@@ -2859,6 +2859,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
 					set_bit(ISP_ABORT_NEEDED,
 					    &vha->dpc_flags);
 					qla2xxx_wake_dpc(vha);
+					break;
 				}
 				/* fall through */
 			default:
@@ -2868,9 +2869,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
 				    fw_status[0], fw_status[1], fw_status[2]);
 
 				fcport->flags &= ~FCF_ASYNC_SENT;
-				qla2x00_set_fcport_disc_state(fcport,
-				    DSC_LOGIN_FAILED);
-				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+				qlt_schedule_sess_for_deletion(fcport);
 				break;
 			}
 			break;
@@ -2882,8 +2881,7 @@ static void qla2x00_els_dcmd2_sp_done(sr
 			    fw_status[0], fw_status[1], fw_status[2]);
 
 			sp->fcport->flags &= ~FCF_ASYNC_SENT;
-			qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_FAILED);
-			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
+			qlt_schedule_sess_for_deletion(fcport);
 			break;
 		}
 
author maintainer
#331 lore raw

PATCH 326/475 scsi: qla2xxx: Reduce false trigger to login

In reply to Greg Kroah-Hartman

From: Quinn Tran <[email protected]>

commit d2646eed7b19a206912f49101178cbbaa507256c upstream.

While a session is in the middle of a relogin, a late RSCN can be delivered from switch. RSCN trigger fabric scan where the scan logic can trigger another session login while a login is in progress. Reduce the extra trigger to prevent multiple logins to the same session.

---
 drivers/scsi/qla2xxx/qla_init.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_init.c +3 -2
@@ -1557,7 +1557,8 @@ int qla24xx_fcport_handle_login(struct s
 	    fcport->conflict, fcport->last_rscn_gen, fcport->rscn_gen,
 	    fcport->login_gen, fcport->loop_id, fcport->scan_state);
 
-	if (fcport->scan_state != QLA_FCPORT_FOUND)
+	if (fcport->scan_state != QLA_FCPORT_FOUND ||
+	    fcport->disc_state == DSC_DELETE_PEND)
 		return 0;
 
 	if ((fcport->loop_id != FC_NO_LOOP_ID) &&
@@ -1578,7 +1579,7 @@ int qla24xx_fcport_handle_login(struct s
 	if (vha->host->active_mode == MODE_TARGET)
 		return 0;
 
-	if (fcport->flags & FCF_ASYNC_SENT) {
+	if (fcport->flags & (FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE)) {
 		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 		return 0;
 	}
author maintainer
#332 lore raw

PATCH 327/475 scsi: qla2xxx: Use correct feature type field during RFF_ID processing

In reply to Greg Kroah-Hartman

From: Manish Rangankar <[email protected]>

commit a7e05f7a1bcbe4ee055479242de46c5c16ab03b1 upstream.

During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending incorrect type field for NVMe supported device. Use correct feature type field.

Fixes e374f9f59281 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface")
---
 drivers/scsi/qla2xxx/qla_gs.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/scsi/qla2xxx/qla_gs.c +2 -3
@@ -675,8 +675,7 @@ qla2x00_rff_id(scsi_qla_host_t *vha, u8
 		return (QLA_SUCCESS);
 	}
 
-	return qla_async_rffid(vha, &vha->d_id, qlt_rff_id(vha),
-	    FC4_TYPE_FCP_SCSI);
+	return qla_async_rffid(vha, &vha->d_id, qlt_rff_id(vha), type);
 }
 
 static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id,
@@ -726,7 +725,7 @@ static int qla_async_rffid(scsi_qla_host
 	/* Prepare CT arguments -- port_id, FC-4 feature, FC-4 type */
 	ct_req->req.rff_id.port_id = port_id_to_be_id(*d_id);
 	ct_req->req.rff_id.fc4_feature = fc4feature;
-	ct_req->req.rff_id.fc4_type = fc4type;		/* SCSI - FCP */
+	ct_req->req.rff_id.fc4_type = fc4type;		/* SCSI-FCP or FC-NVMe */
 
 	sp->u.iocb_cmd.u.ctarg.req_size = RFF_ID_REQ_SIZE;
 	sp->u.iocb_cmd.u.ctarg.rsp_size = RFF_ID_RSP_SIZE;