Skip to content

arm64: dts: qcom: add initial support for Samsung Galaxy S22

Eric Gonçalves linux-arm-msm linux-devicetree lkml 7 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v9 Latest1 patch 2 repliesApplied
  2. v8 posting 2/21 patch 1 replySuperseded
  3. v8 posting 1/21 patch 1 replySuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v52 patches5 repliesSuperseded
v42 patches0 repliesSuperseded
v21 patch1 replySuperseded
v11 patch0 repliesSuperseded

Changes in v9 from the cover letter

- Change 'vph-pwr-regulator' to 'regulator-vph-pwr'

Patches in v9 Applied

#Subject and filesSizeRepliesApplied
1/1arm64: dts: qcom: add initial support for Samsung Galaxy S22arch/arm64/boot/dts/qcom/Makefile arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts+146 -01 reply

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchDmitry Baryshkov
1/1R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v9 thread

Cover letter [PATCH v9 0/1] arm64: dts: qcom: add initial support for Samsung Galaxy S22

Changes in v9:
- Change 'vph-pwr-regulator' to 'regulator-vph-pwr'

Changes in v8:
- Rebase on 'arm64: dts: qcom: sm8450: Flatten usb controller node'
- Use real name for sign-offs
- Remove device tree binding patch as it's already in the tree, merged by Bjorn

Changes in v7:
- Document the reserved GPIO pins, remove pin 50 as it does not need to be reserved
- Clarify the phone isn't limited to USB 2.0 but rather USB 3.0 isn't implemented yet
- Add a newline before every 'status' node

Changes in v6:
- Remove debug features (bootargs, etc) that slipped in the v5 DTS
- Format and organize nodes correctly based on existing DTS, move "status = "okay";" to the bottom always
- Solve "ddr_device_type" and "qcom,rmtfs-mem" warnings, the rest are from existing SoC .dtsi
- Disable buttons, ufs and other features for later revision

Changes in v5:
- Properly format the thread

Changes in v4:
- Try to properly format the thread

Changes in v3:
- Removed unnecessary initrd start and end addresses
- Make sure r0q is in right order on Makefile
- Properly format memory addresses
- Set r0q to the correct, alphabetical order in documents

Changes in v2:
- Attempt to format the patchset thread correctly

Eric Gonçalves (1):
arm64: dts: qcom: add initial support for Samsung Galaxy S22

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm8450-samsung-r0q.dts      | 145 ++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
Signature · 1 line
2.50.1