Skip to contentSkip to conversation

arm64: dts: qcom: add initial support for Samsung Galaxy S22

PATCH Applied Eric Gonçalves 3 participants 4 messages Sep 12, 2025 – Sep 16, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v9 cover arm64: dts: qcom: add initial support for Samsung Galaxy S22

Changes in v9:
- Change 'vph-pwr-regulator' to 'regulator-vph-pwr'

Changes in v8:
- Rebase on 'arm64: dts: qcom: sm8450: Flatten usb controller node'
- Use real name for sign-offs
- Remove device tree binding patch as it's already in the tree, merged by Bjorn

Changes in v7:
- Document the reserved GPIO pins, remove pin 50 as it does not need to be reserved
- Clarify the phone isn't limited to USB 2.0 but rather USB 3.0 isn't implemented yet
- Add a newline before every 'status' node

Changes in v6:
- Remove debug features (bootargs, etc) that slipped in the v5 DTS
- Format and organize nodes correctly based on existing DTS, move "status = "okay";" to the bottom always
- Solve "ddr_device_type" and "qcom,rmtfs-mem" warnings, the rest are from existing SoC .dtsi
- Disable buttons, ufs and other features for later revision

Changes in v5:
- Properly format the thread

Changes in v4:
- Try to properly format the thread

Changes in v3:
- Removed unnecessary initrd start and end addresses
- Make sure r0q is in right order on Makefile
- Properly format memory addresses
- Set r0q to the correct, alphabetical order in documents

Changes in v2:
- Attempt to format the patchset thread correctly

Eric Gonçalves (1):
arm64: dts: qcom: add initial support for Samsung Galaxy S22

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm8450-samsung-r0q.dts      | 145 ++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
Signature · 1 line
2.50.1
#1 lore raw

PATCH v9 1/1 arm64: dts: qcom: add initial support for Samsung Galaxy S22

Add new device support for the Samsung Galaxy S22 (SM-S901E) phone

What works:
- SimpleFB
- USB

---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm8450-samsung-r0q.dts      | 145 ++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
arch/arm64/boot/dts/qcom/Makefile +1 -0
index 94a84770b080..d311e637327e 100644
@@ -285,6 +285,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-samsung-r0q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-hdk.dtb
arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts new file +145 -0

145 lines not on this page · raw message

Signature · 1 line
2.50.1
Reviewed-by on v9 1/1
#2 lore raw
Quoted 6 lines · Eric Gonçalves

Add new device support for the Samsung Galaxy S22 (SM-S901E) phone

What works:
- SimpleFB
- USB

Quoted 7 lines
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sm8450-samsung-r0q.dts      | 145 ++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
Signature · 2 lines
With best wishes
Dmitry
maintainer Applied
#3 lore raw

Re: (subset) [PATCH v9 0/1] arm64: dts: qcom: add initial support for Samsung Galaxy S22

In reply to Eric Gonçalves
Quoted 10 lines · Eric Gonçalves

Changes in v9:
- Change 'vph-pwr-regulator' to 'regulator-vph-pwr'

Changes in v8:
- Rebase on 'arm64: dts: qcom: sm8450: Flatten usb controller node'
- Use real name for sign-offs
- Remove device tree binding patch as it's already in the tree, merged by Bjorn

[...]

Applied, thanks!

[1/1] arm64: dts: qcom: add initial support for Samsung Galaxy S22

      commit: 11cf389c103f69d1170fbd70acbcc282cf03b748

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>